summaryrefslogtreecommitdiffstats
path: root/arch/cris
diff options
context:
space:
mode:
Diffstat (limited to 'arch/cris')
-rw-r--r--arch/cris/Kconfig180
-rw-r--r--arch/cris/Kconfig.debug41
-rw-r--r--arch/cris/Makefile112
-rw-r--r--arch/cris/arch-v10/Kconfig422
-rw-r--r--arch/cris/arch-v10/README.mm244
-rw-r--r--arch/cris/arch-v10/boot/Makefile12
-rw-r--r--arch/cris/arch-v10/boot/compressed/Makefile40
-rw-r--r--arch/cris/arch-v10/boot/compressed/README25
-rw-r--r--arch/cris/arch-v10/boot/compressed/decompress.ld29
-rw-r--r--arch/cris/arch-v10/boot/compressed/head.S111
-rw-r--r--arch/cris/arch-v10/boot/compressed/misc.c273
-rw-r--r--arch/cris/arch-v10/boot/rescue/Makefile55
-rw-r--r--arch/cris/arch-v10/boot/rescue/head.S333
-rw-r--r--arch/cris/arch-v10/boot/rescue/kimagerescue.S144
-rw-r--r--arch/cris/arch-v10/boot/rescue/rescue.ld20
-rw-r--r--arch/cris/arch-v10/boot/rescue/testrescue.S26
-rw-r--r--arch/cris/arch-v10/boot/tools/build.c288
-rw-r--r--arch/cris/arch-v10/defconfig505
-rw-r--r--arch/cris/arch-v10/drivers/Kconfig963
-rw-r--r--arch/cris/arch-v10/drivers/Makefile12
-rw-r--r--arch/cris/arch-v10/drivers/axisflashmap.c541
-rw-r--r--arch/cris/arch-v10/drivers/ds1302.c602
-rw-r--r--arch/cris/arch-v10/drivers/eeprom.c945
-rw-r--r--arch/cris/arch-v10/drivers/gpio.c944
-rw-r--r--arch/cris/arch-v10/drivers/i2c.c730
-rw-r--r--arch/cris/arch-v10/drivers/i2c.h18
-rw-r--r--arch/cris/arch-v10/drivers/pcf8563.c313
-rw-r--r--arch/cris/arch-v10/kernel/Makefile17
-rw-r--r--arch/cris/arch-v10/kernel/asm-offsets.c47
-rw-r--r--arch/cris/arch-v10/kernel/crisksyms.c17
-rw-r--r--arch/cris/arch-v10/kernel/debugport.c531
-rw-r--r--arch/cris/arch-v10/kernel/entry.S1132
-rw-r--r--arch/cris/arch-v10/kernel/fasttimer.c977
-rw-r--r--arch/cris/arch-v10/kernel/head.S882
-rw-r--r--arch/cris/arch-v10/kernel/irq.c204
-rw-r--r--arch/cris/arch-v10/kernel/kgdb.c1568
-rw-r--r--arch/cris/arch-v10/kernel/process.c270
-rw-r--r--arch/cris/arch-v10/kernel/ptrace.c314
-rw-r--r--arch/cris/arch-v10/kernel/setup.c103
-rw-r--r--arch/cris/arch-v10/kernel/shadows.c36
-rw-r--r--arch/cris/arch-v10/kernel/signal.c580
-rw-r--r--arch/cris/arch-v10/kernel/time.c369
-rw-r--r--arch/cris/arch-v10/kernel/traps.c132
-rw-r--r--arch/cris/arch-v10/lib/Makefile9
-rw-r--r--arch/cris/arch-v10/lib/checksum.S124
-rw-r--r--arch/cris/arch-v10/lib/checksumcopy.S132
-rw-r--r--arch/cris/arch-v10/lib/csumcpfruser.S64
-rw-r--r--arch/cris/arch-v10/lib/dmacopy.c43
-rw-r--r--arch/cris/arch-v10/lib/dram_init.S205
-rw-r--r--arch/cris/arch-v10/lib/hw_settings.S62
-rw-r--r--arch/cris/arch-v10/lib/memset.c252
-rw-r--r--arch/cris/arch-v10/lib/old_checksum.c85
-rw-r--r--arch/cris/arch-v10/lib/string.c225
-rw-r--r--arch/cris/arch-v10/lib/usercopy.c523
-rw-r--r--arch/cris/arch-v10/mm/Makefile6
-rw-r--r--arch/cris/arch-v10/mm/fault.c117
-rw-r--r--arch/cris/arch-v10/mm/init.c264
-rw-r--r--arch/cris/arch-v10/mm/tlb.c248
-rw-r--r--arch/cris/arch-v10/output_arch.ld2
-rw-r--r--arch/cris/arch-v10/vmlinux.lds.S120
-rw-r--r--arch/cris/defconfig591
-rw-r--r--arch/cris/kernel/Makefile15
-rw-r--r--arch/cris/kernel/crisksyms.c103
-rw-r--r--arch/cris/kernel/irq.c297
-rw-r--r--arch/cris/kernel/module.c121
-rw-r--r--arch/cris/kernel/process.c280
-rw-r--r--arch/cris/kernel/ptrace.c119
-rw-r--r--arch/cris/kernel/semaphore.c130
-rw-r--r--arch/cris/kernel/setup.c193
-rw-r--r--arch/cris/kernel/sys_cris.c174
-rw-r--r--arch/cris/kernel/time.c232
-rw-r--r--arch/cris/kernel/traps.c144
-rw-r--r--arch/cris/mm/Makefile6
-rw-r--r--arch/cris/mm/fault.c387
-rw-r--r--arch/cris/mm/init.c225
-rw-r--r--arch/cris/mm/ioremap.c146
-rw-r--r--arch/cris/mm/tlb.c126
77 files changed, 20877 insertions, 0 deletions
diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig
new file mode 100644
index 00000000000..4332ca348d5
--- /dev/null
+++ b/arch/cris/Kconfig
@@ -0,0 +1,180 @@
+#
+# For a description of the syntax of this configuration file,
+# see the Configure script.
+#
+
+mainmenu "Linux/CRIS Kernel Configuration"
+
+config MMU
+ bool
+ default y
+
+config UID16
+ bool
+ default y
+
+config RWSEM_GENERIC_SPINLOCK
+ bool
+ default y
+
+config RWSEM_XCHGADD_ALGORITHM
+ bool
+
+config GENERIC_CALIBRATE_DELAY
+ bool
+ default y
+
+config CRIS
+ bool
+ default y
+
+source "init/Kconfig"
+
+menu "General setup"
+
+source "fs/Kconfig.binfmt"
+
+config ETRAX_CMDLINE
+ string "Kernel command line"
+ default "root=/dev/mtdblock3"
+ help
+ Pass additional commands to the kernel.
+
+config ETRAX_WATCHDOG
+ bool "Enable ETRAX watchdog"
+ help
+ Enable the built-in watchdog timer support on ETRAX based embedded
+ network computers.
+
+config ETRAX_WATCHDOG_NICE_DOGGY
+ bool "Disable watchdog during Oops printouts"
+ depends on ETRAX_WATCHDOG
+ help
+ By enabling this you make sure that the watchdog does not bite while
+ printing oopses. Recommended for development systems but not for
+ production releases.
+
+config ETRAX_FAST_TIMER
+ bool "Enable ETRAX fast timer API"
+ help
+ This options enables the API to a fast timer implementation using
+ timer1 to get sub jiffie resolution timers (primarily one-shot
+ timers).
+ This is needed if CONFIG_ETRAX_SERIAL_FAST_TIMER is enabled.
+
+config PREEMPT
+ bool "Preemptible Kernel"
+ help
+ This option reduces the latency of the kernel when reacting to
+ real-time or interactive events by allowing a low priority process to
+ be preempted even if it is in kernel mode executing a system call.
+ This allows applications to run more reliably even when the system is
+ under load.
+
+ Say Y here if you are building a kernel for a desktop, embedded
+ or real-time system. Say N if you are unsure.
+
+endmenu
+
+menu "Hardware setup"
+
+choice
+ prompt "Processor type"
+ default ETRAX100LX
+
+config ETRAX100LX
+ bool "ETRAX-100LX-v1"
+ help
+ Support version 1 of the ETRAX 100LX.
+
+config ETRAX100LX_V2
+ bool "ETRAX-100LX-v2"
+ help
+ Support version 2 of the ETRAX 100LX.
+
+config SVINTO_SIM
+ bool "ETRAX-100LX-for-xsim-simulator"
+ help
+ Support the xsim ETRAX Simulator.
+
+endchoice
+
+config ETRAX_ARCH_V10
+ bool
+ default y if ETRAX100LX || ETRAX100LX_V2
+ default n if !(ETRAX100LX || ETRAX100LX_V2)
+
+config ETRAX_DRAM_SIZE
+ int "DRAM size (dec, in MB)"
+ default "8"
+ help
+ Size of DRAM (decimal in MB) typically 2, 8 or 16.
+
+config ETRAX_FLASH_BUSWIDTH
+ int "Buswidth of flash in bytes"
+ default "2"
+ help
+ Width in bytes of the Flash bus (1, 2 or 4). Is usually 2.
+
+source arch/cris/arch-v10/Kconfig
+
+endmenu
+
+# bring in ETRAX built-in drivers
+menu "Drivers for built-in interfaces"
+source arch/cris/arch-v10/drivers/Kconfig
+
+endmenu
+
+source "drivers/base/Kconfig"
+
+# standard linux drivers
+source "drivers/mtd/Kconfig"
+
+source "drivers/parport/Kconfig"
+
+source "drivers/pnp/Kconfig"
+
+source "drivers/block/Kconfig"
+
+source "drivers/md/Kconfig"
+
+source "drivers/ide/Kconfig"
+
+source "drivers/scsi/Kconfig"
+
+source "drivers/ieee1394/Kconfig"
+
+source "drivers/message/i2o/Kconfig"
+
+source "net/Kconfig"
+
+source "drivers/isdn/Kconfig"
+
+source "drivers/telephony/Kconfig"
+
+source "drivers/cdrom/Kconfig"
+
+#
+# input before char - char/joystick depends on it. As does USB.
+#
+source "drivers/input/Kconfig"
+
+source "drivers/char/Kconfig"
+
+#source drivers/misc/Config.in
+source "drivers/media/Kconfig"
+
+source "fs/Kconfig"
+
+source "sound/Kconfig"
+
+source "drivers/usb/Kconfig"
+
+source "arch/cris/Kconfig.debug"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"
diff --git a/arch/cris/Kconfig.debug b/arch/cris/Kconfig.debug
new file mode 100644
index 00000000000..f42918bf22a
--- /dev/null
+++ b/arch/cris/Kconfig.debug
@@ -0,0 +1,41 @@
+menu "Kernel hacking"
+
+#bool 'Debug kmalloc/kfree' CONFIG_DEBUG_MALLOC
+config PROFILING
+ bool "Kernel profiling support"
+
+config SYSTEM_PROFILER
+ bool "System profiling support"
+
+config ETRAX_KGDB
+ bool "Use kernel GDB debugger"
+ ---help---
+ The CRIS version of gdb can be used to remotely debug a running
+ Linux kernel via the serial debug port. Provided you have gdb-cris
+ installed, run gdb-cris vmlinux, then type
+
+ (gdb) set remotebaud 115200 <- kgdb uses 115200 as default
+ (gdb) target remote /dev/ttyS0 <- maybe you use another port
+
+ This should connect you to your booted kernel (or boot it now if you
+ didn't before). The kernel halts when it boots, waiting for gdb if
+ this option is turned on!
+
+
+config DEBUG_INFO
+ bool "Compile the kernel with debug info"
+ help
+ If you say Y here the resulting kernel image will include
+ debugging info resulting in a larger kernel image.
+ Say Y here only if you plan to use gdb to debug the kernel.
+ If you don't debug the kernel, you can say N.
+
+config FRAME_POINTER
+ bool "Compile the kernel with frame pointers"
+ help
+ If you say Y here the resulting kernel image will be slightly larger
+ and slower, but it will give very useful debugging information.
+ If you don't debug the kernel, you can say N, but we may not be able
+ to solve problems without frame pointers.
+
+endmenu
diff --git a/arch/cris/Makefile b/arch/cris/Makefile
new file mode 100644
index 00000000000..9d28fa8563c
--- /dev/null
+++ b/arch/cris/Makefile
@@ -0,0 +1,112 @@
+# $Id: Makefile,v 1.23 2004/10/19 13:07:34 starvik Exp $
+# cris/Makefile
+#
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies. Remember to do have actions
+# for "archclean" and "archdep" for cleaning up and making dependencies for
+# this architecture
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License. See the file "COPYING" in the main directory of this archive
+# for more details.
+
+# A bug in ld prevents us from having a (constant-value) symbol in a
+# "ORIGIN =" or "LENGTH =" expression.
+
+arch-y := v10
+arch-$(CONFIG_ETRAX_ARCH_V10) := v10
+
+# No config avaiable for make clean etc
+ifneq ($(arch-y),)
+SARCH := arch-$(arch-y)
+else
+SARCH :=
+endif
+
+LD = $(CROSS_COMPILE)ld -mcrislinux
+
+OBJCOPYFLAGS := -O binary -R .note -R .comment -S
+
+CPPFLAGS_vmlinux.lds = -DDRAM_VIRTUAL_BASE=0x$(CONFIG_ETRAX_DRAM_VIRTUAL_BASE)
+AFLAGS += -mlinux
+
+CFLAGS := $(CFLAGS) -mlinux -march=$(arch-y) -pipe
+
+ifdef CONFIG_FRAME_POINTER
+CFLAGS := $(subst -fomit-frame-pointer,,$(CFLAGS)) -g
+CFLAGS += -fno-omit-frame-pointer
+endif
+
+head-y := arch/$(ARCH)/$(SARCH)/kernel/head.o
+
+LIBGCC = $(shell $(CC) $(CFLAGS) -print-file-name=libgcc.a)
+
+core-y += arch/$(ARCH)/kernel/ arch/$(ARCH)/mm/
+core-y += arch/$(ARCH)/$(SARCH)/kernel/ arch/$(ARCH)/$(SARCH)/mm/
+drivers-y += arch/$(ARCH)/$(SARCH)/drivers/
+libs-y += arch/$(ARCH)/$(SARCH)/lib/ $(LIBGCC)
+
+vmlinux.bin: vmlinux
+ $(OBJCOPY) $(OBJCOPYFLAGS) vmlinux vmlinux.bin
+
+timage: vmlinux.bin
+ cat vmlinux.bin cramfs.img >timage
+
+simimage: timage
+ cp vmlinux.bin simvmlinux.bin
+
+# the following will remake timage without compiling the kernel
+# it does of course require that all object files exist...
+
+cramfs:
+## cramfs - Creates a cramfs image
+ mkcramfs -b 8192 -m romfs_meta.txt root cramfs.img
+ cat vmlinux.bin cramfs.img >timage
+
+clinux: vmlinux.bin decompress.bin rescue.bin
+
+decompress.bin: FORCE
+ @make -C arch/$(ARCH)/boot/compressed decompress.bin
+
+rescue.bin: FORCE
+ @make -C arch/$(ARCH)/boot/rescue rescue.bin
+
+zImage: vmlinux.bin rescue.bin
+## zImage - Compressed kernel (gzip)
+ @make -C arch/$(ARCH)/boot/ zImage
+
+compressed: zImage
+
+archmrproper:
+archclean:
+ $(Q)$(MAKE) $(clean)=arch/$(ARCH)/boot
+ rm -f timage vmlinux.bin decompress.bin rescue.bin cramfs.img
+ rm -rf $(LD_SCRIPT).tmp
+
+prepare: arch/$(ARCH)/.links include/asm-$(ARCH)/.arch \
+ include/asm-$(ARCH)/$(SARCH)/offset.h
+
+# Create some links to make all tools happy
+arch/$(ARCH)/.links:
+ @rm -rf arch/$(ARCH)/drivers
+ @ln -sfn $(SARCH)/drivers arch/$(ARCH)/drivers
+ @rm -rf arch/$(ARCH)/boot
+ @ln -sfn $(SARCH)/boot arch/$(ARCH)/boot
+ @rm -rf arch/$(ARCH)/lib
+ @ln -sfn $(SARCH)/lib arch/$(ARCH)/lib
+ @ln -sfn $(SARCH) arch/$(ARCH)/arch
+ @ln -sfn ../$(SARCH)/vmlinux.lds.S arch/$(ARCH)/kernel/vmlinux.lds.S
+ @touch $@
+
+# Create link to sub arch includes
+include/asm-$(ARCH)/.arch: $(wildcard include/config/arch/*.h)
+ @echo ' Making asm-$(ARCH)/arch -> asm-$(ARCH)/$(SARCH) symlink'
+ @rm -f include/asm-$(ARCH)/arch
+ @ln -sf $(SARCH) include/asm-$(ARCH)/arch
+ @touch $@
+
+arch/$(ARCH)/$(SARCH)/kernel/asm-offsets.s: include/asm include/linux/version.h \
+ include/config/MARKER
+
+include/asm-$(ARCH)/$(SARCH)/offset.h: arch/$(ARCH)/$(SARCH)/kernel/asm-offsets.s
+ $(call filechk,gen-asm-offsets)
diff --git a/arch/cris/arch-v10/Kconfig b/arch/cris/arch-v10/Kconfig
new file mode 100644
index 00000000000..2ca64cc40c6
--- /dev/null
+++ b/arch/cris/arch-v10/Kconfig
@@ -0,0 +1,422 @@
+# ETRAX 100LX v1 has a MMU "feature" requiring a low mapping
+config CRIS_LOW_MAP
+ bool
+ depends on ETRAX_ARCH_V10 && ETRAX100LX
+ default y
+
+config ETRAX_DRAM_VIRTUAL_BASE
+ hex
+ depends on ETRAX_ARCH_V10
+ default "c0000000" if !ETRAX100LX
+ default "60000000" if ETRAX100LX
+
+choice
+ prompt "Product LED port"
+ depends on ETRAX_ARCH_V10
+ default ETRAX_PA_LEDS
+
+config ETRAX_PA_LEDS
+ bool "Port-PA-LEDs"
+ help
+ The ETRAX network driver is responsible for flashing LED's when
+ packets arrive and are sent. It uses macros defined in
+ <file:include/asm-cris/io.h>, and those macros are defined after what
+ YOU choose in this option. The actual bits used are configured
+ separately. Select this if the LEDs are on port PA. Some products
+ put the leds on PB or a memory-mapped latch (CSP0) instead.
+
+config ETRAX_PB_LEDS
+ bool "Port-PB-LEDs"
+ help
+ The ETRAX network driver is responsible for flashing LED's when
+ packets arrive and are sent. It uses macros defined in
+ <file:include/asm-cris/io.h>, and those macros are defined after what
+ YOU choose in this option. The actual bits used are configured
+ separately. Select this if the LEDs are on port PB. Some products
+ put the leds on PA or a memory-mapped latch (CSP0) instead.
+
+config ETRAX_CSP0_LEDS
+ bool "Port-CSP0-LEDs"
+ help
+ The ETRAX network driver is responsible for flashing LED's when
+ packets arrive and are sent. It uses macros defined in
+ <file:include/asm-cris/io.h>, and those macros are defined after what
+ YOU choose in this option. The actual bits used are configured
+ separately. Select this if the LEDs are on a memory-mapped latch
+ using chip select CSP0, this is mapped at 0x90000000.
+ Some products put the leds on PA or PB instead.
+
+config ETRAX_NO_LEDS
+ bool "None"
+ help
+ Select this option if you don't have any LED at all.
+
+endchoice
+
+config ETRAX_LED1G
+ int "First green LED bit"
+ depends on ETRAX_ARCH_V10 && !ETRAX_NO_LEDS
+ default "2"
+ help
+ Bit to use for the first green LED.
+ Most Axis products use bit 2 here.
+
+config ETRAX_LED1R
+ int "First red LED bit"
+ depends on ETRAX_ARCH_V10 && !ETRAX_NO_LEDS
+ default "3"
+ help
+ Bit to use for the first red LED.
+ Most Axis products use bit 3 here.
+ For products with only one controllable LED,
+ set this to same as CONFIG_ETRAX_LED1G (normally 2).
+
+config ETRAX_LED2G
+ int "Second green LED bit"
+ depends on ETRAX_ARCH_V10 && !ETRAX_NO_LEDS
+ default "4"
+ help
+ Bit to use for the second green LED. The "Active" LED.
+ Most Axis products use bit 4 here.
+ For products with only one controllable LED,
+ set this to same as CONFIG_ETRAX_LED1G (normally 2).
+
+config ETRAX_LED2R
+ int "Second red LED bit"
+ depends on ETRAX_ARCH_V10 && !ETRAX_NO_LEDS
+ default "5"
+ help
+ Bit to use for the second red LED.
+ Most Axis products use bit 5 here.
+ For products with only one controllable LED,
+ set this to same as CONFIG_ETRAX_LED1G (normally 2).
+
+config ETRAX_LED3G
+ int "Third green LED bit"
+ depends on ETRAX_ARCH_V10 && !ETRAX_NO_LEDS
+ default "2"
+ help
+ Bit to use for the third green LED. The "Drive" LED.
+ For products with only one or two controllable LEDs,
+ set this to same as CONFIG_ETRAX_LED1G (normally 2).
+
+config ETRAX_LED3R
+ int "Third red LED bit"
+ depends on ETRAX_ARCH_V10 && !ETRAX_NO_LEDS
+ default "2"
+ help
+ Bit to use for the third red LED.
+ For products with only one or two controllable LEDs,
+ set this to same as CONFIG_ETRAX_LED1G (normally 2).
+
+config ETRAX_LED4R
+ int "Fourth red LED bit"
+ depends on ETRAX_CSP0_LEDS
+ default "2"
+ help
+ Bit to use for the fourth red LED.
+ For products with only one or two controllable LEDs,
+ set this to same as CONFIG_ETRAX_LED1G (normally 2).
+
+config ETRAX_LED4G
+ int "Fourth green LED bit"
+ depends on ETRAX_CSP0_LEDS
+ default "2"
+ help
+ Bit to use for the fourth green LED.
+ For products with only one or two controllable LEDs,
+ set this to same as CONFIG_ETRAX_LED1G (normally 2).
+
+config ETRAX_LED5R
+ int "Fifth red LED bit"
+ depends on ETRAX_CSP0_LEDS
+ default "2"
+ help
+ Bit to use for the fifth red LED.
+ For products with only one or two controllable LEDs,
+ set this to same as CONFIG_ETRAX_LED1G (normally 2).
+
+config ETRAX_LED5G
+ int "Fifth green LED bit"
+ depends on ETRAX_CSP0_LEDS
+ default "2"
+ help
+ Bit to use for the fifth green LED.
+ For products with only one or two controllable LEDs,
+ set this to same as CONFIG_ETRAX_LED1G (normally 2).
+
+config ETRAX_LED6R
+ int "Sixth red LED bit"
+ depends on ETRAX_CSP0_LEDS
+ default "2"
+ help
+ Bit to use for the sixth red LED.
+ For products with only one or two controllable LEDs,
+ set this to same as CONFIG_ETRAX_LED1G (normally 2).
+
+config ETRAX_LED6G
+ int "Sixth green LED bit"
+ depends on ETRAX_CSP0_LEDS
+ default "2"
+ help
+ Bit to use for the sixth green LED. The "Drive" LED.
+ For products with only one or two controllable LEDs,
+ set this to same as CONFIG_ETRAX_LED1G (normally 2).
+
+config ETRAX_LED7R
+ int "Seventh red LED bit"
+ depends on ETRAX_CSP0_LEDS
+ default "2"
+ help
+ Bit to use for the seventh red LED.
+ For products with only one or two controllable LEDs,
+ set this to same as CONFIG_ETRAX_LED1G (normally 2).
+
+config ETRAX_LED7G
+ int "Seventh green LED bit"
+ depends on ETRAX_CSP0_LEDS
+ default "2"
+ help
+ Bit to use for the seventh green LED.
+ For products with only one or two controllable LEDs,
+ set this to same as CONFIG_ETRAX_LED1G (normally 2).
+
+config ETRAX_LED8Y
+ int "Eigth yellow LED bit"
+ depends on ETRAX_CSP0_LEDS
+ default "2"
+ help
+ Bit to use for the eighth yellow LED. The "Drive" LED.
+ For products with only one or two controllable LEDs,
+ set this to same as CONFIG_ETRAX_LED1G (normally 2).
+
+config ETRAX_LED9Y
+ int "Ninth yellow LED bit"
+ depends on ETRAX_CSP0_LEDS
+ default "2"
+ help
+ Bit to use for the ninth yellow LED.
+ For products with only one or two controllable LEDs,
+ set this to same as CONFIG_ETRAX_LED1G (normally 2).
+
+config ETRAX_LED10Y
+ int "Tenth yellow LED bit"
+ depends on ETRAX_CSP0_LEDS
+ default "2"
+ help
+ Bit to use for the tenth yellow LED.
+ For products with only one or two controllable LEDs,
+ set this to same as CONFIG_ETRAX_LED1G (normally 2).
+
+config ETRAX_LED11Y
+ int "Eleventh yellow LED bit"
+ depends on ETRAX_CSP0_LEDS
+ default "2"
+ help
+ Bit to use for the eleventh yellow LED.
+ For products with only one or two controllable LEDs,
+ set this to same as CONFIG_ETRAX_LED1G (normally 2).
+
+config ETRAX_LED12R
+ int "Twelfth red LED bit"
+ depends on ETRAX_CSP0_LEDS
+ default "2"
+ help
+ Bit to use for the twelfth red LED.
+ For products with only one or two controllable LEDs,
+ set this to same as CONFIG_ETRAX_LED1G (normally 2).
+
+choice
+ prompt "Product debug-port"
+ depends on ETRAX_ARCH_V10
+ default ETRAX_DEBUG_PORT0
+
+config ETRAX_DEBUG_PORT0
+ bool "Serial-0"
+ help
+ Choose a serial port for the ETRAX debug console. Default to
+ port 0.
+
+config ETRAX_DEBUG_PORT1
+ bool "Serial-1"
+ help
+ Use serial port 1 for the console.
+
+config ETRAX_DEBUG_PORT2
+ bool "Serial-2"
+ help
+ Use serial port 2 for the console.
+
+config ETRAX_DEBUG_PORT3
+ bool "Serial-3"
+ help
+ Use serial port 3 for the console.
+
+config ETRAX_DEBUG_PORT_NULL
+ bool "disabled"
+ help
+ Disable serial-port debugging.
+
+endchoice
+
+choice
+ prompt "Product rescue-port"
+ depends on ETRAX_ARCH_V10
+ default ETRAX_RESCUE_SER0
+
+config ETRAX_RESCUE_SER0
+ bool "Serial-0"
+ help
+ Select one of the four serial ports as a rescue port. The default
+ is port 0.
+
+config ETRAX_RESCUE_SER1
+ bool "Serial-1"
+ help
+ Use serial port 1 as the rescue port.
+
+config ETRAX_RESCUE_SER2
+ bool "Serial-2"
+ help
+ Use serial port 2 as the rescue port.
+
+config ETRAX_RESCUE_SER3
+ bool "Serial-3"
+ help
+ Use serial port 3 as the rescue port.
+
+endchoice
+
+config ETRAX_DEF_R_WAITSTATES
+ hex "R_WAITSTATES"
+ depends on ETRAX_ARCH_V10
+ default "95a6"
+ help
+ Waitstates for SRAM, Flash and peripherials (not DRAM). 95f8 is a
+ good choice for most Axis products...
+
+config ETRAX_DEF_R_BUS_CONFIG
+ hex "R_BUS_CONFIG"
+ depends on ETRAX_ARCH_V10
+ default "104"
+ help
+ Assorted bits controlling write mode, DMA burst length etc. 104 is
+ a good choice for most Axis products...
+
+config ETRAX_SDRAM
+ bool "SDRAM support"
+ depends on ETRAX_ARCH_V10
+ help
+ Enable this if you use SDRAM chips and configure
+ R_SDRAM_CONFIG and R_SDRAM_TIMING as well.
+
+config ETRAX_DEF_R_DRAM_CONFIG
+ hex "R_DRAM_CONFIG"
+ depends on ETRAX_ARCH_V10 && !ETRAX_SDRAM
+ default "1a200040"
+ help
+ The R_DRAM_CONFIG register specifies everything on how the DRAM
+ chips in the system are connected to the ETRAX CPU. This is
+ different depending on the manufacturer, chip type and number of
+ chips. So this value often needs to be different for each Axis
+ product.
+
+config ETRAX_DEF_R_DRAM_TIMING
+ hex "R_DRAM_TIMING"
+ depends on ETRAX_ARCH_V10 && !ETRAX_SDRAM
+ default "5611"
+ help
+ Different DRAM chips have different speeds. Current Axis products
+ use 50ns DRAM chips which can use the timing: 5611.
+
+config ETRAX_DEF_R_SDRAM_CONFIG
+ hex "R_SDRAM_CONFIG"
+ depends on ETRAX_ARCH_V10 && ETRAX_SDRAM
+ default "d2fa7878"
+ help
+ The R_SDRAM_CONFIG register specifies everything on how the SDRAM
+ chips in the system are connected to the ETRAX CPU. This is
+ different depending on the manufacturer, chip type and number of
+ chips. So this value often needs to be different for each Axis
+ product.
+
+config ETRAX_DEF_R_SDRAM_TIMING
+ hex "R_SDRAM_TIMING"
+ depends on ETRAX_ARCH_V10 && ETRAX_SDRAM
+ default "80004801"
+ help
+ Different SDRAM chips have different timing.
+
+config ETRAX_DEF_R_PORT_PA_DIR
+ hex "R_PORT_PA_DIR"
+ depends on ETRAX_ARCH_V10
+ default "1c"
+ help
+ Configures the direction of general port A bits. 1 is out, 0 is in.
+ This is often totally different depending on the product used.
+ There are some guidelines though - if you know that only LED's are
+ connected to port PA, then they are usually connected to bits 2-4
+ and you can therefore use 1c. On other boards which don't have the
+ LED's at the general ports, these bits are used for all kinds of
+ stuff. If you don't know what to use, it is always safe to put all
+ as inputs, although floating inputs isn't good.
+
+config ETRAX_DEF_R_PORT_PA_DATA
+ hex "R_PORT_PA_DATA"
+ depends on ETRAX_ARCH_V10
+ default "00"
+ help
+ Configures the initial data for the general port A bits. Most
+ products should use 00 here.
+
+config ETRAX_DEF_R_PORT_PB_CONFIG
+ hex "R_PORT_PB_CONFIG"
+ depends on ETRAX_ARCH_V10
+ default "00"
+ help
+ Configures the type of the general port B bits. 1 is chip select,
+ 0 is port. Most products should use 00 here.
+
+config ETRAX_DEF_R_PORT_PB_DIR
+ hex "R_PORT_PB_DIR"
+ depends on ETRAX_ARCH_V10
+ default "00"
+ help
+ Configures the direction of general port B bits. 1 is out, 0 is in.
+ This is often totally different depending on the product used. Bits
+ 0 and 1 on port PB are usually used for I2C communication, but the
+ kernel I2C driver sets the appropriate directions itself so you
+ don't need to take that into consideration when setting this option.
+ If you don't know what to use, it is always safe to put all as
+ inputs.
+
+config ETRAX_DEF_R_PORT_PB_DATA
+ hex "R_PORT_PB_DATA"
+ depends on ETRAX_ARCH_V10
+ default "ff"
+ help
+ Configures the initial data for the general port A bits. Most
+ products should use FF here.
+
+config ETRAX_SOFT_SHUTDOWN
+ bool "Software Shutdown Support"
+ depends on ETRAX_ARCH_V10
+ help
+ Enable this if ETRAX is used with a power-supply that can be turned
+ off and on with PS_ON signal. Gives the possibility to detect
+ powerbutton and then do a power off after unmounting disks.
+
+config ETRAX_SHUTDOWN_BIT
+ int "Shutdown bit on port CSP0"
+ depends on ETRAX_SOFT_SHUTDOWN
+ default "12"
+ help
+ Configure what pin on CSPO-port that is used for controlling power
+ supply.
+
+config ETRAX_POWERBUTTON_BIT
+ int "Power button bit on port G"
+ depends on ETRAX_SOFT_SHUTDOWN
+ default "25"
+ help
+ Configure where power button is connected.
diff --git a/arch/cris/arch-v10/README.mm b/arch/cris/arch-v10/README.mm
new file mode 100644
index 00000000000..6f08903f313
--- /dev/null
+++ b/arch/cris/arch-v10/README.mm
@@ -0,0 +1,244 @@
+Memory management for CRIS/MMU
+------------------------------
+HISTORY:
+
+$Log: README.mm,v $
+Revision 1.1 2001/12/17 13:59:27 bjornw
+Initial revision
+
+Revision 1.1 2000/07/10 16:25:21 bjornw
+Initial revision
+
+Revision 1.4 2000/01/17 02:31:59 bjornw
+Added discussion of paging and VM.
+
+Revision 1.3 1999/12/03 16:43:23 hp
+Blurb about that the 3.5G-limitation is not a MMU limitation
+
+Revision 1.2 1999/12/03 16:04:21 hp
+Picky comment about not mapping the first page
+
+Revision 1.1 1999/12/03 15:41:30 bjornw
+First version of CRIS/MMU memory layout specification.
+
+
+
+
+
+------------------------------
+
+See the ETRAX-NG HSDD for reference.
+
+We use the page-size of 8 kbytes, as opposed to the i386 page-size of 4 kbytes.
+
+The MMU can, apart from the normal mapping of pages, also do a top-level
+segmentation of the kernel memory space. We use this feature to avoid having
+to use page-tables to map the physical memory into the kernel's address
+space. We also use it to keep the user-mode virtual mapping in the same
+map during kernel-mode, so that the kernel easily can access the corresponding
+user-mode process' data.
+
+As a comparision, the Linux/i386 2.0 puts the kernel and physical RAM at
+address 0, overlapping with the user-mode virtual space, so that descriptor
+registers are needed for each memory access to specify which MMU space to
+map through. That changed in 2.2, putting the kernel/physical RAM at
+0xc0000000, to co-exist with the user-mode mapping. We will do something
+quite similar, but with the additional complexity of having to map the
+internal chip I/O registers and the flash memory area (including SRAM
+and peripherial chip-selets).
+
+The kernel-mode segmentation map:
+
+ ------------------------ ------------------------
+FFFFFFFF| | => cached | |
+ | kernel seg_f | flash | |
+F0000000|______________________| | |
+EFFFFFFF| | => uncached | |
+ | kernel seg_e | flash | |
+E0000000|______________________| | DRAM |
+DFFFFFFF| | paged to any | Un-cached |
+ | kernel seg_d | =======> | |
+D0000000|______________________| | |
+CFFFFFFF| | | |
+ | kernel seg_c |==\ | |
+C0000000|______________________| \ |______________________|
+BFFFFFFF| | uncached | |
+ | kernel seg_b |=====\=========>| Registers |
+B0000000|______________________| \c |______________________|
+AFFFFFFF| | \a | |
+ | | \c | FLASH/SRAM/Peripheral|
+ | | \h |______________________|
+ | | \e | |
+ | | \d | |
+ | kernel seg_0 - seg_a | \==>| DRAM |
+ | | | Cached |
+ | | paged to any | |
+ | | =======> |______________________|
+ | | | |
+ | | | Illegal |
+ | | |______________________|
+ | | | |
+ | | | FLASH/SRAM/Peripheral|
+00000000|______________________| |______________________|
+
+In user-mode it looks the same except that only the space 0-AFFFFFFF is
+available. Therefore, in this model, the virtual address space per process
+is limited to 0xb0000000 bytes (minus 8192 bytes, since the first page,
+0..8191, is never mapped, in order to trap NULL references).
+
+It also means that the total physical RAM that can be mapped is 256 MB
+(kseg_c above). More RAM can be mapped by choosing a different segmentation
+and shrinking the user-mode memory space.
+
+The MMU can map all 4 GB in user mode, but doing that would mean that a
+few extra instructions would be needed for each access to user mode
+memory.
+
+The kernel needs access to both cached and uncached flash. Uncached is
+necessary because of the special write/erase sequences. Also, the
+peripherial chip-selects are decoded from that region.
+
+The kernel also needs its own virtual memory space. That is kseg_d. It
+is used by the vmalloc() kernel function to allocate virtual contiguous
+chunks of memory not possible using the normal kmalloc physical RAM
+allocator.
+
+The setting of the actual MMU control registers to use this layout would
+be something like this:
+
+R_MMU_KSEG = ( ( seg_f, seg ) | // Flash cached
+ ( seg_e, seg ) | // Flash uncached
+ ( seg_d, page ) | // kernel vmalloc area
+ ( seg_c, seg ) | // kernel linear segment
+ ( seg_b, seg ) | // kernel linear segment
+ ( seg_a, page ) |
+ ( seg_9, page ) |
+ ( seg_8, page ) |
+ ( seg_7, page ) |
+ ( seg_6, page ) |
+ ( seg_5, page ) |
+ ( seg_4, page ) |
+ ( seg_3, page ) |
+ ( seg_2, page ) |
+ ( seg_1, page ) |
+ ( seg_0, page ) );
+
+R_MMU_KBASE_HI = ( ( base_f, 0x0 ) | // flash/sram/periph cached
+ ( base_e, 0x8 ) | // flash/sram/periph uncached
+ ( base_d, 0x0 ) | // don't care
+ ( base_c, 0x4 ) | // physical RAM cached area
+ ( base_b, 0xb ) | // uncached on-chip registers
+ ( base_a, 0x0 ) | // don't care
+ ( base_9, 0x0 ) | // don't care
+ ( base_8, 0x0 ) ); // don't care
+
+R_MMU_KBASE_LO = ( ( base_7, 0x0 ) | // don't care
+ ( base_6, 0x0 ) | // don't care
+ ( base_5, 0x0 ) | // don't care
+ ( base_4, 0x0 ) | // don't care
+ ( base_3, 0x0 ) | // don't care
+ ( base_2, 0x0 ) | // don't care
+ ( base_1, 0x0 ) | // don't care
+ ( base_0, 0x0 ) ); // don't care
+
+NOTE: while setting up the MMU, we run in a non-mapped mode in the DRAM (0x40
+segment) and need to setup the seg_4 to a unity mapping, so that we don't get
+a fault before we have had time to jump into the real kernel segment (0xc0). This
+is done in head.S temporarily, but fixed by the kernel later in paging_init.
+
+
+Paging - PTE's, PMD's and PGD's
+-------------------------------
+
+[ References: asm/pgtable.h, asm/page.h, asm/mmu.h ]
+
+The paging mechanism uses virtual addresses to split a process memory-space into
+pages, a page being the smallest unit that can be freely remapped in memory. On
+Linux/CRIS, a page is 8192 bytes (for technical reasons not equal to 4096 as in
+most other 32-bit architectures). It would be inefficient to let a virtual memory
+mapping be controlled by a long table of page mappings, so it is broken down into
+a 2-level structure with a Page Directory containing pointers to Page Tables which
+each have maps of up to 2048 pages (8192 / sizeof(void *)). Linux can actually
+handle 3-level structures as well, with a Page Middle Directory in between, but
+in many cases, this is folded into a two-level structure by excluding the Middle
+Directory.
+
+We'll take a look at how an address is translated while we discuss how it's handled
+in the Linux kernel.
+
+The example address is 0xd004000c; in binary this is:
+
+31 23 15 7 0
+11010000 00000100 00000000 00001100
+
+|______| |__________||____________|
+ PGD PTE page offset
+
+Given the top-level Page Directory, the offset in that directory is calculated
+using the upper 8 bits:
+
+extern inline pgd_t * pgd_offset(struct mm_struct * mm, unsigned long address)
+{
+ return mm->pgd + (address >> PGDIR_SHIFT);
+}
+
+PGDIR_SHIFT is the log2 of the amount of memory an entry in the PGD can map; in our
+case it is 24, corresponding to 16 MB. This means that each entry in the PGD
+corresponds to 16 MB of virtual memory.
+
+The pgd_t from our example will therefore be the 208'th (0xd0) entry in mm->pgd.
+
+Since the Middle Directory does not exist, it is a unity mapping:
+
+extern inline pmd_t * pmd_offset(pgd_t * dir, unsigned long address)
+{
+ return (pmd_t *) dir;
+}
+
+The Page Table provides the final lookup by using bits 13 to 23 as index:
+
+extern inline pte_t * pte_offset(pmd_t * dir, unsigned long address)
+{
+ return (pte_t *) pmd_page(*dir) + ((address >> PAGE_SHIFT) &
+ (PTRS_PER_PTE - 1));
+}
+
+PAGE_SHIFT is the log2 of the size of a page; 13 in our case. PTRS_PER_PTE is
+the number of pointers that fit in a Page Table and is used to mask off the
+PGD-part of the address.
+
+The so-far unused bits 0 to 12 are used to index inside a page linearily.
+
+The VM system
+-------------
+
+The kernels own page-directory is the swapper_pg_dir, cleared in paging_init,
+and contains the kernels virtual mappings (the kernel itself is not paged - it
+is mapped linearily using kseg_c as described above). Architectures without
+kernel segments like the i386, need to setup swapper_pg_dir directly in head.S
+to map the kernel itself. swapper_pg_dir is pointed to by init_mm.pgd as the
+init-task's PGD.
+
+To see what support functions are used to setup a page-table, let's look at the
+kernel's internal paged memory system, vmalloc/vfree.
+
+void * vmalloc(unsigned long size)
+
+The vmalloc-system keeps a paged segment in kernel-space at 0xd0000000. What
+happens first is that a virtual address chunk is allocated to the request using
+get_vm_area(size). After that, physical RAM pages are allocated and put into
+the kernel's page-table using alloc_area_pages(addr, size).
+
+static int alloc_area_pages(unsigned long address, unsigned long size)
+
+First the PGD entry is found using init_mm.pgd. This is passed to
+alloc_area_pmd (remember the 3->2 folding). It uses pte_alloc_kernel to
+check if the PGD entry points anywhere - if not, a page table page is
+allocated and the PGD entry updated. Then the alloc_area_pte function is
+used just like alloc_area_pmd to check which page table entry is desired,
+and a physical page is allocated and the table entry updated. All of this
+is repeated at the top-level until the entire address range specified has
+been mapped.
+
+
+
diff --git a/arch/cris/arch-v10/boot/Makefile b/arch/cris/arch-v10/boot/Makefile
new file mode 100644
index 00000000000..fe6650368e6
--- /dev/null
+++ b/arch/cris/arch-v10/boot/Makefile
@@ -0,0 +1,12 @@
+#
+# arch/cris/boot/Makefile
+#
+
+zImage: compressed/vmlinuz
+
+compressed/vmlinuz: $(TOPDIR)/vmlinux
+ @$(MAKE) -C compressed vmlinuz
+
+clean:
+ rm -f zImage tools/build compressed/vmlinux.out
+ @$(MAKE) -C compressed clean
diff --git a/arch/cris/arch-v10/boot/compressed/Makefile b/arch/cris/arch-v10/boot/compressed/Makefile
new file mode 100644
index 00000000000..5f71c2c819e
--- /dev/null
+++ b/arch/cris/arch-v10/boot/compressed/Makefile
@@ -0,0 +1,40 @@
+#
+# linux/arch/etrax100/boot/compressed/Makefile
+#
+# create a compressed vmlinux image from the original vmlinux files and romfs
+#
+
+CC = gcc-cris -melf -I $(TOPDIR)/include
+CFLAGS = -O2
+LD = ld-cris
+OBJCOPY = objcopy-cris
+OBJCOPYFLAGS = -O binary --remove-section=.bss
+OBJECTS = head.o misc.o
+
+# files to compress
+SYSTEM = $(TOPDIR)/vmlinux.bin
+
+all: vmlinuz
+
+decompress.bin: $(OBJECTS)
+ $(LD) -T decompress.ld -o decompress.o $(OBJECTS)
+ $(OBJCOPY) $(OBJCOPYFLAGS) decompress.o decompress.bin
+# save it for mkprod in the topdir.
+ cp decompress.bin $(TOPDIR)
+
+
+vmlinuz: piggy.img decompress.bin
+ cat decompress.bin piggy.img > vmlinuz
+ rm -f piggy.img
+
+head.o: head.S
+ $(CC) -D__ASSEMBLY__ -traditional -c head.S -o head.o
+
+# gzip the kernel image
+
+piggy.img: $(SYSTEM)
+ cat $(SYSTEM) | gzip -f -9 > piggy.img
+
+clean:
+ rm -f piggy.img vmlinuz vmlinuz.o
+
diff --git a/arch/cris/arch-v10/boot/compressed/README b/arch/cris/arch-v10/boot/compressed/README
new file mode 100644
index 00000000000..48b3db9924b
--- /dev/null
+++ b/arch/cris/arch-v10/boot/compressed/README
@@ -0,0 +1,25 @@
+Creation of the self-extracting compressed kernel image (vmlinuz)
+-----------------------------------------------------------------
+$Id: README,v 1.1 2001/12/17 13:59:27 bjornw Exp $
+
+This can be slightly confusing because it's a process with many steps.
+
+The kernel object built by the arch/etrax100/Makefile, vmlinux, is split
+by that makefile into text and data binary files, vmlinux.text and
+vmlinux.data.
+
+Those files together with a ROM filesystem can be catted together and
+burned into a flash or executed directly at the DRAM origin.
+
+They can also be catted together and compressed with gzip, which is what
+happens in this makefile. Together they make up piggy.img.
+
+The decompressor is built into the file decompress.o. It is turned into
+the binary file decompress.bin, which is catted together with piggy.img
+into the file vmlinuz. It can be executed in an arbitrary place in flash.
+
+Be careful - it assumes some things about free locations in DRAM. It
+assumes the DRAM starts at 0x40000000 and that it is at least 8 MB,
+so it puts its code at 0x40700000, and initial stack at 0x40800000.
+
+-Bjorn
diff --git a/arch/cris/arch-v10/boot/compressed/decompress.ld b/arch/cris/arch-v10/boot/compressed/decompress.ld
new file mode 100644
index 00000000000..0b0a14fe617
--- /dev/null
+++ b/arch/cris/arch-v10/boot/compressed/decompress.ld
@@ -0,0 +1,29 @@
+OUTPUT_FORMAT(elf32-us-cris)
+
+MEMORY
+ {
+ dram : ORIGIN = 0x40700000,
+ LENGTH = 0x00100000
+ }
+
+SECTIONS
+{
+ .text :
+ {
+ _stext = . ;
+ *(.text)
+ *(.rodata)
+ *(.rodata.*)
+ _etext = . ;
+ } > dram
+ .data :
+ {
+ *(.data)
+ _edata = . ;
+ } > dram
+ .bss :
+ {
+ *(.bss)
+ _end = ALIGN( 0x10 ) ;
+ } > dram
+}
diff --git a/arch/cris/arch-v10/boot/compressed/head.S b/arch/cris/arch-v10/boot/compressed/head.S
new file mode 100644
index 00000000000..4cbdd4b1d9d
--- /dev/null
+++ b/arch/cris/arch-v10/boot/compressed/head.S
@@ -0,0 +1,111 @@
+/*
+ * arch/cris/boot/compressed/head.S
+ *
+ * Copyright (C) 1999, 2001 Axis Communications AB
+ *
+ * Code that sets up the DRAM registers, calls the
+ * decompressor to unpack the piggybacked kernel, and jumps.
+ *
+ */
+
+#include <linux/config.h>
+#define ASSEMBLER_MACROS_ONLY
+#include <asm/arch/sv_addr_ag.h>
+
+#define RAM_INIT_MAGIC 0x56902387
+
+ ;; Exported symbols
+
+ .globl _input_data
+
+
+ .text
+
+ nop
+ di
+
+;; We need to initialze DRAM registers before we start using the DRAM
+
+ cmp.d RAM_INIT_MAGIC, r8 ; Already initialized?
+ beq dram_init_finished
+ nop
+
+#include "../../lib/dram_init.S"
+
+dram_init_finished:
+
+ ;; Initiate the PA and PB ports
+
+ move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA, r0
+ move.b r0, [R_PORT_PA_DATA]
+
+ move.b CONFIG_ETRAX_DEF_R_PORT_PA_DIR, r0
+ move.b r0, [R_PORT_PA_DIR]
+
+ move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA, r0
+ move.b r0, [R_PORT_PB_DATA]
+
+ move.b CONFIG_ETRAX_DEF_R_PORT_PB_DIR, r0
+ move.b r0, [R_PORT_PB_DIR]
+
+ ;; Setup the stack to a suitably high address.
+ ;; We assume 8 MB is the minimum DRAM in an eLinux
+ ;; product and put the sp at the top for now.
+
+ move.d 0x40800000, sp
+
+ ;; Figure out where the compressed piggyback image is
+ ;; in the flash (since we wont try to copy it to DRAM
+ ;; before unpacking). It is at _edata, but in flash.
+ ;; Use (_edata - basse) as offset to the current PC.
+
+basse: move.d pc, r5
+ and.d 0x7fffffff, r5 ; strip any non-cache bit
+ subq 2, r5 ; compensate for the move.d pc instr
+ move.d r5, r0 ; save for later - flash address of 'basse'
+ add.d _edata, r5
+ sub.d basse, r5 ; r5 = flash address of '_edata'
+
+ ;; Copy text+data to DRAM
+
+ move.d basse, r1 ; destination
+ move.d _edata, r2 ; end destination
+1: move.w [r0+], r3
+ move.w r3, [r1+]
+ cmp.d r2, r1
+ bcs 1b
+ nop
+
+ move.d r5, [_input_data] ; for the decompressor
+
+
+ ;; Clear the decompressors BSS (between _edata and _end)
+
+ moveq 0, r0
+ move.d _edata, r1
+ move.d _end, r2
+1: move.w r0, [r1+]
+ cmp.d r2, r1
+ bcs 1b
+ nop
+
+ ;; Do the decompression and save compressed size in _inptr
+
+ jsr _decompress_kernel
+
+ ;; Put start address of root partition in r9 so the kernel can use it
+ ;; when mounting from flash
+
+ move.d [_input_data], r9 ; flash address of compressed kernel
+ add.d [_inptr], r9 ; size of compressed kernel
+
+ ;; Enter the decompressed kernel
+ move.d RAM_INIT_MAGIC, r8 ; Tell kernel that DRAM is initialized
+ jump 0x40004000 ; kernel is linked to this address
+
+ .data
+
+_input_data:
+ .dword 0 ; used by the decompressor
+
+#include "../../lib/hw_settings.S"
diff --git a/arch/cris/arch-v10/boot/compressed/misc.c b/arch/cris/arch-v10/boot/compressed/misc.c
new file mode 100644
index 00000000000..1b5e83f1f84
--- /dev/null
+++ b/arch/cris/arch-v10/boot/compressed/misc.c
@@ -0,0 +1,273 @@
+/*
+ * misc.c
+ *
+ * $Id: misc.c,v 1.6 2003/10/27 08:04:31 starvik Exp $
+ *
+ * This is a collection of several routines from gzip-1.0.3
+ * adapted for Linux.
+ *
+ * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
+ * puts by Nick Holloway 1993, better puts by Martin Mares 1995
+ * adoptation for Linux/CRIS Axis Communications AB, 1999
+ *
+ */
+
+/* where the piggybacked kernel image expects itself to live.
+ * it is the same address we use when we network load an uncompressed
+ * image into DRAM, and it is the address the kernel is linked to live
+ * at by vmlinux.lds.S
+ */
+
+#define KERNEL_LOAD_ADR 0x40004000
+
+#include <linux/config.h>
+
+#include <linux/types.h>
+#include <asm/arch/svinto.h>
+
+/*
+ * gzip declarations
+ */
+
+#define OF(args) args
+#define STATIC static
+
+void* memset(void* s, int c, size_t n);
+void* memcpy(void* __dest, __const void* __src,
+ size_t __n);
+
+#define memzero(s, n) memset ((s), 0, (n))
+
+
+typedef unsigned char uch;
+typedef unsigned short ush;
+typedef unsigned long ulg;
+
+#define WSIZE 0x8000 /* Window size must be at least 32k, */
+ /* and a power of two */
+
+static uch *inbuf; /* input buffer */
+static uch window[WSIZE]; /* Sliding window buffer */
+
+unsigned inptr = 0; /* index of next byte to be processed in inbuf
+ * After decompression it will contain the
+ * compressed size, and head.S will read it.
+ */
+
+static unsigned outcnt = 0; /* bytes in output buffer */
+
+/* gzip flag byte */
+#define ASCII_FLAG 0x01 /* bit 0 set: file probably ascii text */
+#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
+#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */
+#define ORIG_NAME 0x08 /* bit 3 set: original file name present */
+#define COMMENT 0x10 /* bit 4 set: file comment present */
+#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */
+#define RESERVED 0xC0 /* bit 6,7: reserved */
+
+#define get_byte() inbuf[inptr++]
+
+/* Diagnostic functions */
+#ifdef DEBUG
+# define Assert(cond,msg) {if(!(cond)) error(msg);}
+# define Trace(x) fprintf x
+# define Tracev(x) {if (verbose) fprintf x ;}
+# define Tracevv(x) {if (verbose>1) fprintf x ;}
+# define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
+# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
+#else
+# define Assert(cond,msg)
+# define Trace(x)
+# define Tracev(x)
+# define Tracevv(x)
+# define Tracec(c,x)
+# define Tracecv(c,x)
+#endif
+
+static int fill_inbuf(void);
+static void flush_window(void);
+static void error(char *m);
+static void gzip_mark(void **);
+static void gzip_release(void **);
+
+extern char *input_data; /* lives in head.S */
+
+static long bytes_out = 0;
+static uch *output_data;
+static unsigned long output_ptr = 0;
+
+static void *malloc(int size);
+static void free(void *where);
+static void error(char *m);
+static void gzip_mark(void **);
+static void gzip_release(void **);
+
+static void puts(const char *);
+
+/* the "heap" is put directly after the BSS ends, at end */
+
+extern int end;
+static long free_mem_ptr = (long)&end;
+
+#include "../../../../../lib/inflate.c"
+
+static void *malloc(int size)
+{
+ void *p;
+
+ if (size <0) error("Malloc error");
+
+ free_mem_ptr = (free_mem_ptr + 3) & ~3; /* Align */
+
+ p = (void *)free_mem_ptr;
+ free_mem_ptr += size;
+
+ return p;
+}
+
+static void free(void *where)
+{ /* Don't care */
+}
+
+static void gzip_mark(void **ptr)
+{
+ *ptr = (void *) free_mem_ptr;
+}
+
+static void gzip_release(void **ptr)
+{
+ free_mem_ptr = (long) *ptr;
+}
+
+/* decompressor info and error messages to serial console */
+
+static void
+puts(const char *s)
+{
+#ifndef CONFIG_ETRAX_DEBUG_PORT_NULL
+ while(*s) {
+#ifdef CONFIG_ETRAX_DEBUG_PORT0
+ while(!(*R_SERIAL0_STATUS & (1 << 5))) ;
+ *R_SERIAL0_TR_DATA = *s++;
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT1
+ while(!(*R_SERIAL1_STATUS & (1 << 5))) ;
+ *R_SERIAL1_TR_DATA = *s++;
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT2
+ while(!(*R_SERIAL2_STATUS & (1 << 5))) ;
+ *R_SERIAL2_TR_DATA = *s++;
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT3
+ while(!(*R_SERIAL3_STATUS & (1 << 5))) ;
+ *R_SERIAL3_TR_DATA = *s++;
+#endif
+ }
+#endif
+}
+
+void*
+memset(void* s, int c, size_t n)
+{
+ int i;
+ char *ss = (char*)s;
+
+ for (i=0;i<n;i++) ss[i] = c;
+}
+
+void*
+memcpy(void* __dest, __const void* __src,
+ size_t __n)
+{
+ int i;
+ char *d = (char *)__dest, *s = (char *)__src;
+
+ for (i=0;i<__n;i++) d[i] = s[i];
+}
+
+/* ===========================================================================
+ * Write the output window window[0..outcnt-1] and update crc and bytes_out.
+ * (Used for the decompressed data only.)
+ */
+
+static void
+flush_window()
+{
+ ulg c = crc; /* temporary variable */
+ unsigned n;
+ uch *in, *out, ch;
+
+ in = window;
+ out = &output_data[output_ptr];
+ for (n = 0; n < outcnt; n++) {
+ ch = *out++ = *in++;
+ c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
+ }
+ crc = c;
+ bytes_out += (ulg)outcnt;
+ output_ptr += (ulg)outcnt;
+ outcnt = 0;
+}
+
+static void
+error(char *x)
+{
+ puts("\n\n");
+ puts(x);
+ puts("\n\n -- System halted\n");
+
+ while(1); /* Halt */
+}
+
+void
+setup_normal_output_buffer()
+{
+ output_data = (char *)KERNEL_LOAD_ADR;
+}
+
+void
+decompress_kernel()
+{
+ char revision;
+
+ /* input_data is set in head.S */
+ inbuf = input_data;
+
+#ifdef CONFIG_ETRAX_DEBUG_PORT0
+ *R_SERIAL0_XOFF = 0;
+ *R_SERIAL0_BAUD = 0x99;
+ *R_SERIAL0_TR_CTRL = 0x40;
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT1
+ *R_SERIAL1_XOFF = 0;
+ *R_SERIAL1_BAUD = 0x99;
+ *R_SERIAL1_TR_CTRL = 0x40;
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT2
+ *R_GEN_CONFIG = 0x08;
+ *R_SERIAL2_XOFF = 0;
+ *R_SERIAL2_BAUD = 0x99;
+ *R_SERIAL2_TR_CTRL = 0x40;
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT3
+ *R_GEN_CONFIG = 0x100;
+ *R_SERIAL3_XOFF = 0;
+ *R_SERIAL3_BAUD = 0x99;
+ *R_SERIAL3_TR_CTRL = 0x40;
+#endif
+
+ setup_normal_output_buffer();
+
+ makecrc();
+
+ __asm__ volatile ("move vr,%0" : "=rm" (revision));
+ if (revision < 10)
+ {
+ puts("You need an ETRAX 100LX to run linux 2.6\n");
+ while(1);
+ }
+
+ puts("Uncompressing Linux...\n");
+ gunzip();
+ puts("Done. Now booting the kernel.\n");
+}
diff --git a/arch/cris/arch-v10/boot/rescue/Makefile b/arch/cris/arch-v10/boot/rescue/Makefile
new file mode 100644
index 00000000000..e9f2ba2ad02
--- /dev/null
+++ b/arch/cris/arch-v10/boot/rescue/Makefile
@@ -0,0 +1,55 @@
+#
+# Makefile for rescue code
+#
+ifndef TOPDIR
+TOPDIR = ../../../..
+endif
+CC = gcc-cris -mlinux -I $(TOPDIR)/include
+CFLAGS = -O2
+LD = gcc-cris -mlinux -nostdlib
+OBJCOPY = objcopy-cris
+OBJCOPYFLAGS = -O binary --remove-section=.bss
+
+all: rescue.bin testrescue.bin kimagerescue.bin
+
+rescue: rescue.bin
+ # do nothing
+
+rescue.bin: head.o
+ $(LD) -T rescue.ld -o rescue.o head.o
+ $(OBJCOPY) $(OBJCOPYFLAGS) rescue.o rescue.bin
+ cp rescue.bin $(TOPDIR)
+
+testrescue.bin: testrescue.o
+ $(OBJCOPY) $(OBJCOPYFLAGS) testrescue.o tr.bin
+# Pad it to 784 bytes
+ dd if=/dev/zero of=tmp2423 bs=1 count=784
+ cat tr.bin tmp2423 >testrescue_tmp.bin
+ dd if=testrescue_tmp.bin of=testrescue.bin bs=1 count=784
+ rm tr.bin tmp2423 testrescue_tmp.bin
+
+kimagerescue.bin: kimagerescue.o
+ $(OBJCOPY) $(OBJCOPYFLAGS) kimagerescue.o ktr.bin
+# Pad it to 784 bytes, that's what the rescue loader expects
+ dd if=/dev/zero of=tmp2423 bs=1 count=784
+ cat ktr.bin tmp2423 >kimagerescue_tmp.bin
+ dd if=kimagerescue_tmp.bin of=kimagerescue.bin bs=1 count=784
+ rm ktr.bin tmp2423 kimagerescue_tmp.bin
+
+head.o: head.S
+ $(CC) -D__ASSEMBLY__ -traditional -c $< -o $*.o
+
+testrescue.o: testrescue.S
+ $(CC) -D__ASSEMBLY__ -traditional -c $< -o $*.o
+
+kimagerescue.o: kimagerescue.S
+ $(CC) -D__ASSEMBLY__ -traditional -c $< -o $*.o
+
+clean:
+ rm -f *.o *.bin
+
+fastdep:
+
+modules:
+
+modules-install:
diff --git a/arch/cris/arch-v10/boot/rescue/head.S b/arch/cris/arch-v10/boot/rescue/head.S
new file mode 100644
index 00000000000..8689ea972c4
--- /dev/null
+++ b/arch/cris/arch-v10/boot/rescue/head.S
@@ -0,0 +1,333 @@
+/* $Id: head.S,v 1.6 2003/04/09 08:12:43 pkj Exp $
+ *
+ * Rescue code, made to reside at the beginning of the
+ * flash-memory. when it starts, it checks a partition
+ * table at the first sector after the rescue sector.
+ * the partition table was generated by the product builder
+ * script and contains offsets, lengths, types and checksums
+ * for each partition that this code should check.
+ *
+ * If any of the checksums fail, we assume the flash is so
+ * corrupt that we cant use it to boot into the ftp flash
+ * loader, and instead we initialize the serial port to
+ * receive a flash-loader and new flash image. we dont include
+ * any flash code here, but just accept a certain amount of
+ * bytes from the serial port and jump into it. the downloaded
+ * code is put in the cache.
+ *
+ * The partitiontable is designed so that it is transparent to
+ * code execution - it has a relative branch opcode in the
+ * beginning that jumps over it. each entry contains extra
+ * data so we can add stuff later.
+ *
+ * Partition table format:
+ *
+ * Code transparency:
+ *
+ * 2 bytes [opcode 'nop']
+ * 2 bytes [opcode 'di']
+ * 4 bytes [opcode 'ba <offset>', 8-bit or 16-bit version]
+ * 2 bytes [opcode 'nop', delay slot]
+ *
+ * Table validation (at +10):
+ *
+ * 2 bytes [magic/version word for partitiontable - 0xef, 0xbe]
+ * 2 bytes [length of all entries plus the end marker]
+ * 4 bytes [checksum for the partitiontable itself]
+ *
+ * Entries, each with the following format, last has offset -1:
+ *
+ * 4 bytes [offset in bytes, from start of flash]
+ * 4 bytes [length in bytes of partition]
+ * 4 bytes [checksum, simple longword sum]
+ * 2 bytes [partition type]
+ * 2 bytes [flags, only bit 0 used, ro/rw = 1/0]
+ * 16 bytes [reserved for future use]
+ *
+ * End marker
+ *
+ * 4 bytes [-1]
+ *
+ * 10 bytes [0, padding]
+ *
+ * Bit 0 in flags signifies RW or RO. The rescue code only bothers
+ * to check the checksum for RO partitions, since the others will
+ * change their data without updating the checksums. A 1 in bit 0
+ * means RO, 0 means RW. That way, it is possible to set a partition
+ * in RO mode initially, and later mark it as RW, since you can always
+ * write 0's to the flash.
+ *
+ * During the wait for serial input, the status LED will flash so the
+ * user knows something went wrong.
+ *
+ * Copyright (C) 1999, 2000, 2001, 2002, 2003 Axis Communications AB
+ */
+
+#include <linux/config.h>
+#define ASSEMBLER_MACROS_ONLY
+#include <asm/arch/sv_addr_ag.h>
+
+ ;; The partitiontable is looked for at the first sector after the boot
+ ;; sector. Sector size is 65536 bytes in all flashes we use.
+
+#define PTABLE_START CONFIG_ETRAX_PTABLE_SECTOR
+#define PTABLE_MAGIC 0xbeef
+
+ ;; The normal Etrax100 on-chip boot ROM does serial boot at 0x380000f0.
+ ;; That is not where we put our downloaded serial boot-code. The length is
+ ;; enough for downloading code that loads the rest of itself (after
+ ;; having setup the DRAM etc). It is the same length as the on-chip
+ ;; ROM loads, so the same host loader can be used to load a rescued
+ ;; product as well as one booted through the Etrax serial boot code.
+
+#define CODE_START 0x40000000
+#define CODE_LENGTH 784
+
+#ifdef CONFIG_ETRAX_RESCUE_SER0
+#define SERXOFF R_SERIAL0_XOFF
+#define SERBAUD R_SERIAL0_BAUD
+#define SERRECC R_SERIAL0_REC_CTRL
+#define SERRDAT R_SERIAL0_REC_DATA
+#define SERSTAT R_SERIAL0_STATUS
+#endif
+#ifdef CONFIG_ETRAX_RESCUE_SER1
+#define SERXOFF R_SERIAL1_XOFF
+#define SERBAUD R_SERIAL1_BAUD
+#define SERRECC R_SERIAL1_REC_CTRL
+#define SERRDAT R_SERIAL1_REC_DATA
+#define SERSTAT R_SERIAL1_STATUS
+#endif
+#ifdef CONFIG_ETRAX_RESCUE_SER2
+#define SERXOFF R_SERIAL2_XOFF
+#define SERBAUD R_SERIAL2_BAUD
+#define SERRECC R_SERIAL2_REC_CTRL
+#define SERRDAT R_SERIAL2_REC_DATA
+#define SERSTAT R_SERIAL2_STATUS
+#endif
+#ifdef CONFIG_ETRAX_RESCUE_SER3
+#define SERXOFF R_SERIAL3_XOFF
+#define SERBAUD R_SERIAL3_BAUD
+#define SERRECC R_SERIAL3_REC_CTRL
+#define SERRDAT R_SERIAL3_REC_DATA
+#define SERSTAT R_SERIAL3_STATUS
+#endif
+
+#define NOP_DI 0xf025050f
+#define RAM_INIT_MAGIC 0x56902387
+
+ .text
+
+ ;; This is the entry point of the rescue code
+ ;; 0x80000000 if loaded in flash (as it should be)
+ ;; since etrax actually starts at address 2 when booting from flash, we
+ ;; put a nop (2 bytes) here first so we dont accidentally skip the di
+
+ nop
+ di
+
+ jump in_cache ; enter cached area instead
+in_cache:
+
+ ;; first put a jump test to give a possibility of upgrading the rescue code
+ ;; without erasing/reflashing the sector. we put a longword of -1 here and if
+ ;; it is not -1, we jump using the value as jump target. since we can always
+ ;; change 1's to 0's without erasing the sector, it is possible to add new
+ ;; code after this and altering the jumptarget in an upgrade.
+
+jtcd: move.d [jumptarget], $r0
+ cmp.d 0xffffffff, $r0
+ beq no_newjump
+ nop
+
+ jump [$r0]
+
+jumptarget:
+ .dword 0xffffffff ; can be overwritten later to insert new code
+
+no_newjump:
+#ifdef CONFIG_ETRAX_ETHERNET
+ ;; Start MII clock to make sure it is running when tranceiver is reset
+ move.d 0x3, $r0 ; enable = on, phy = mii_clk
+ move.d $r0, [R_NETWORK_GEN_CONFIG]
+#endif
+
+ ;; We need to setup the bus registers before we start using the DRAM
+#include "../../lib/dram_init.S"
+
+ ;; we now should go through the checksum-table and check the listed
+ ;; partitions for errors.
+
+ move.d PTABLE_START, $r3
+ move.d [$r3], $r0
+ cmp.d NOP_DI, $r0 ; make sure the nop/di is there...
+ bne do_rescue
+ nop
+
+ ;; skip the code transparency block (10 bytes).
+
+ addq 10, $r3
+
+ ;; check for correct magic
+
+ move.w [$r3+], $r0
+ cmp.w PTABLE_MAGIC, $r0
+ bne do_rescue ; didn't recognize - trig rescue
+ nop
+
+ ;; check for correct ptable checksum
+
+ movu.w [$r3+], $r2 ; ptable length
+ move.d $r2, $r8 ; save for later, length of total ptable
+ addq 28, $r8 ; account for the rest
+ move.d [$r3+], $r4 ; ptable checksum
+ move.d $r3, $r1
+ jsr checksum ; r1 source, r2 length, returns in r0
+
+ cmp.d $r0, $r4
+ bne do_rescue ; didn't match - trig rescue
+ nop
+
+ ;; ptable is ok. validate each entry.
+
+ moveq -1, $r7
+
+ploop: move.d [$r3+], $r1 ; partition offset (from ptable start)
+ bne notfirst ; check if it is the partition containing ptable
+ nop ; yes..
+ move.d $r8, $r1 ; for its checksum check, skip the ptable
+ move.d [$r3+], $r2 ; partition length
+ sub.d $r8, $r2 ; minus the ptable length
+ ba bosse
+ nop
+notfirst:
+ cmp.d -1, $r1 ; the end of the ptable ?
+ beq flash_ok ; if so, the flash is validated
+ move.d [$r3+], $r2 ; partition length
+bosse: move.d [$r3+], $r5 ; checksum
+ move.d [$r3+], $r4 ; type and flags
+ addq 16, $r3 ; skip the reserved bytes
+ btstq 16, $r4 ; check ro flag
+ bpl ploop ; rw partition, skip validation
+ nop
+ btstq 17, $r4 ; check bootable flag
+ bpl 1f
+ nop
+ move.d $r1, $r7 ; remember boot partition offset
+1:
+
+ add.d PTABLE_START, $r1
+
+ jsr checksum ; checksum the partition
+
+ cmp.d $r0, $r5
+ beq ploop ; checksums matched, go to next entry
+ nop
+
+ ;; otherwise fall through to the rescue code.
+
+do_rescue:
+ ;; setup port PA and PB default initial directions and data
+ ;; (so we can flash LEDs, and so that DTR and others are set)
+
+ move.b CONFIG_ETRAX_DEF_R_PORT_PA_DIR, $r0
+ move.b $r0, [R_PORT_PA_DIR]
+ move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA, $r0
+ move.b $r0, [R_PORT_PA_DATA]
+
+ move.b CONFIG_ETRAX_DEF_R_PORT_PB_DIR, $r0
+ move.b $r0, [R_PORT_PB_DIR]
+ move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA, $r0
+ move.b $r0, [R_PORT_PB_DATA]
+
+ ;; setup the serial port at 115200 baud
+
+ moveq 0, $r0
+ move.d $r0, [SERXOFF]
+
+ move.b 0x99, $r0
+ move.b $r0, [SERBAUD] ; 115.2kbaud for both transmit and receive
+
+ move.b 0x40, $r0 ; rec enable
+ move.b $r0, [SERRECC]
+
+ moveq 0, $r1 ; "timer" to clock out a LED red flash
+ move.d CODE_START, $r3 ; destination counter
+ movu.w CODE_LENGTH, $r4; length
+
+wait_ser:
+ addq 1, $r1
+#ifndef CONFIG_ETRAX_NO_LEDS
+#ifdef CONFIG_ETRAX_PA_LEDS
+ move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA, $r2
+#endif
+#ifdef CONFIG_ETRAX_PB_LEDS
+ move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA, $r2
+#endif
+ move.d (1 << CONFIG_ETRAX_LED1R) | (1 << CONFIG_ETRAX_LED2R), $r0
+ btstq 16, $r1
+ bpl 1f
+ nop
+ or.d $r0, $r2 ; set bit
+ ba 2f
+ nop
+1: not $r0 ; clear bit
+ and.d $r0, $r2
+2:
+#ifdef CONFIG_ETRAX_PA_LEDS
+ move.b $r2, [R_PORT_PA_DATA]
+#endif
+#ifdef CONFIG_ETRAX_PB_LEDS
+ move.b $r2, [R_PORT_PB_DATA]
+#endif
+#ifdef CONFIG_ETRAX_90000000_LEDS
+ move.b $r2, [0x90000000]
+#endif
+#endif
+
+ ;; check if we got something on the serial port
+
+ move.b [SERSTAT], $r0
+ btstq 0, $r0 ; data_avail
+ bpl wait_ser
+ nop
+
+ ;; got something - copy the byte and loop
+
+ move.b [SERRDAT], $r0
+ move.b $r0, [$r3+]
+
+ subq 1, $r4 ; decrease length
+ bne wait_ser
+ nop
+
+ ;; jump into downloaded code
+
+ move.d RAM_INIT_MAGIC, $r8 ; Tell next product that DRAM is initialized
+ jump CODE_START
+
+flash_ok:
+ ;; check r7, which contains either -1 or the partition to boot from
+
+ cmp.d -1, $r7
+ bne 1f
+ nop
+ move.d PTABLE_START, $r7; otherwise use the ptable start
+1:
+ move.d RAM_INIT_MAGIC, $r8 ; Tell next product that DRAM is initialized
+ jump $r7 ; boot!
+
+
+ ;; Helper subroutines
+
+ ;; Will checksum by simple addition
+ ;; r1 - source
+ ;; r2 - length in bytes
+ ;; result will be in r0
+checksum:
+ moveq 0, $r0
+1: addu.b [$r1+], $r0
+ subq 1, $r2
+ bne 1b
+ nop
+ ret
+ nop
diff --git a/arch/cris/arch-v10/boot/rescue/kimagerescue.S b/arch/cris/arch-v10/boot/rescue/kimagerescue.S
new file mode 100644
index 00000000000..264bf7afc9a
--- /dev/null
+++ b/arch/cris/arch-v10/boot/rescue/kimagerescue.S
@@ -0,0 +1,144 @@
+/* $Id: kimagerescue.S,v 1.1 2001/12/17 13:59:27 bjornw Exp $
+ *
+ * Rescue code to be prepended on a kimage and copied to the
+ * rescue serial port.
+ * This is called from the rescue code, it will copy received data to
+ * 4004000 and after a timeout jump to it.
+ */
+
+#include <linux/config.h>
+#define ASSEMBLER_MACROS_ONLY
+#include <asm/sv_addr_ag.h>
+
+#define CODE_START 0x40004000
+#define CODE_LENGTH 784
+#define TIMEOUT_VALUE 1000
+
+
+#ifdef CONFIG_ETRAX_RESCUE_SER0
+#define SERXOFF R_SERIAL0_XOFF
+#define SERBAUD R_SERIAL0_BAUD
+#define SERRECC R_SERIAL0_REC_CTRL
+#define SERRDAT R_SERIAL0_REC_DATA
+#define SERSTAT R_SERIAL0_STATUS
+#endif
+#ifdef CONFIG_ETRAX_RESCUE_SER1
+#define SERXOFF R_SERIAL1_XOFF
+#define SERBAUD R_SERIAL1_BAUD
+#define SERRECC R_SERIAL1_REC_CTRL
+#define SERRDAT R_SERIAL1_REC_DATA
+#define SERSTAT R_SERIAL1_STATUS
+#endif
+#ifdef CONFIG_ETRAX_RESCUE_SER2
+#define SERXOFF R_SERIAL2_XOFF
+#define SERBAUD R_SERIAL2_BAUD
+#define SERRECC R_SERIAL2_REC_CTRL
+#define SERRDAT R_SERIAL2_REC_DATA
+#define SERSTAT R_SERIAL2_STATUS
+#endif
+#ifdef CONFIG_ETRAX_RESCUE_SER3
+#define SERXOFF R_SERIAL3_XOFF
+#define SERBAUD R_SERIAL3_BAUD
+#define SERRECC R_SERIAL3_REC_CTRL
+#define SERRDAT R_SERIAL3_REC_DATA
+#define SERSTAT R_SERIAL3_STATUS
+#endif
+
+ .text
+ ;; This is the entry point of the rescue code
+ ;; 0x80000000 if loaded in flash (as it should be)
+ ;; since etrax actually starts at address 2 when booting from flash, we
+ ;; put a nop (2 bytes) here first so we dont accidentally skip the di
+
+ nop
+ di
+#ifndef CONFIG_SVINTO_SIM
+ ;; setup port PA and PB default initial directions and data
+ ;; (so we can flash LEDs, and so that DTR and others are set)
+
+ move.b CONFIG_ETRAX_DEF_R_PORT_PA_DIR, $r0
+ move.b $r0, [R_PORT_PA_DIR]
+ move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA, $r0
+ move.b $r0, [R_PORT_PA_DATA]
+
+ move.b CONFIG_ETRAX_DEF_R_PORT_PB_DIR, $r0
+ move.b $r0, [R_PORT_PB_DIR]
+ move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA, $r0
+ move.b $r0, [R_PORT_PB_DATA]
+
+ ;; We need to setup the bus registers before we start using the DRAM
+#include "../../lib/dram_init.S"
+
+#endif
+ ;; Setup the stack to a suitably high address.
+ ;; We assume 8 MB is the minimum DRAM in an eLinux
+ ;; product and put the sp at the top for now.
+
+ move.d 0x40800000, $sp
+
+ ;; setup the serial port at 115200 baud
+
+ moveq 0, $r0
+ move.d $r0, [SERXOFF]
+
+ move.b 0x99, $r0
+ move.b $r0, [SERBAUD] ; 115.2kbaud for both transmit and receive
+
+ move.b 0x40, $r0 ; rec enable
+ move.b $r0, [SERRECC]
+
+
+ moveq 0, $r1 ; "timer" to clock out a LED red flash
+ move.d CODE_START, $r3 ; destination counter
+ move.d CODE_LENGTH, $r4 ; length
+ move.d TIMEOUT_VALUE, $r5 ; "timeout" until jump
+
+wait_ser:
+ addq 1, $r1
+ subq 1, $r5 ; decrease timeout
+ beq jump_start ; timed out
+ nop
+#ifndef CONFIG_ETRAX_NO_LEDS
+#ifdef CONFIG_ETRAX_PA_LEDS
+ move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA, $r2
+#endif
+#ifdef CONFIG_ETRAX_PB_LEDS
+ move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA, $r2
+#endif
+ move.d (1 << CONFIG_ETRAX_LED1R) | (1 << CONFIG_ETRAX_LED2R), $r0
+ btstq 16, $r1
+ bpl 1f
+ nop
+ or.d $r0, $r2 ; set bit
+ ba 2f
+ nop
+1: not $r0 ; clear bit
+ and.d $r0, $r2
+2:
+#ifdef CONFIG_ETRAX_PA_LEDS
+ move.b $r2, [R_PORT_PA_DATA]
+#endif
+#ifdef CONFIG_ETRAX_PB_LEDS
+ move.b $r2, [R_PORT_PB_DATA]
+#endif
+#endif
+
+ ;; check if we got something on the serial port
+
+ move.b [SERSTAT], $r0
+ btstq 0, $r0 ; data_avail
+ bpl wait_ser
+ nop
+
+ ;; got something - copy the byte and loop
+
+ move.b [SERRDAT], $r0
+ move.b $r0, [$r3+]
+ move.d TIMEOUT_VALUE, $r5 ; reset "timeout"
+ subq 1, $r4 ; decrease length
+ bne wait_ser
+ nop
+jump_start:
+ ;; jump into downloaded code
+
+ jump CODE_START
diff --git a/arch/cris/arch-v10/boot/rescue/rescue.ld b/arch/cris/arch-v10/boot/rescue/rescue.ld
new file mode 100644
index 00000000000..0b52a9490db
--- /dev/null
+++ b/arch/cris/arch-v10/boot/rescue/rescue.ld
@@ -0,0 +1,20 @@
+MEMORY
+ {
+ flash : ORIGIN = 0x00000000,
+ LENGTH = 0x00100000
+ }
+
+SECTIONS
+{
+ .text :
+ {
+ stext = . ;
+ *(.text)
+ etext = . ;
+ } > flash
+ .data :
+ {
+ *(.data)
+ edata = . ;
+ } > flash
+}
diff --git a/arch/cris/arch-v10/boot/rescue/testrescue.S b/arch/cris/arch-v10/boot/rescue/testrescue.S
new file mode 100644
index 00000000000..566a9f34125
--- /dev/null
+++ b/arch/cris/arch-v10/boot/rescue/testrescue.S
@@ -0,0 +1,26 @@
+/* $Id: testrescue.S,v 1.1 2001/12/17 13:59:27 bjornw Exp $
+ *
+ * Simple testcode to download by the rescue block.
+ * Just lits some LEDs to show it was downloaded correctly.
+ *
+ * Copyright (C) 1999 Axis Communications AB
+ */
+
+#define ASSEMBLER_MACROS_ONLY
+#include <asm/sv_addr_ag.h>
+
+ .text
+
+ nop
+ nop
+ moveq -1, $r2
+ move.b $r2, [R_PORT_PA_DIR]
+ moveq 0, $r2
+ move.b $r2, [R_PORT_PA_DATA]
+
+endless:
+ nop
+ ba endless
+ nop
+
+
diff --git a/arch/cris/arch-v10/boot/tools/build.c b/arch/cris/arch-v10/boot/tools/build.c
new file mode 100644
index 00000000000..2f9bbb26d60
--- /dev/null
+++ b/arch/cris/arch-v10/boot/tools/build.c
@@ -0,0 +1,288 @@
+/*
+ * linux/tools/build.c
+ *
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ */
+
+/*
+ * This file builds a disk-image from three different files:
+ *
+ * - bootsect: exactly 512 bytes of 8086 machine code, loads the rest
+ * - setup: 8086 machine code, sets up system parm
+ * - system: 80386 code for actual system
+ *
+ * It does some checking that all files are of the correct type, and
+ * just writes the result to stdout, removing headers and padding to
+ * the right amount. It also writes some system data to stderr.
+ */
+
+/*
+ * Changes by tytso to allow root device specification
+ * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
+ * Cross compiling fixes by Gertjan van Wingerde, July 1996
+ */
+
+#include <stdio.h> /* fprintf */
+#include <string.h>
+#include <stdlib.h> /* contains exit */
+#include <sys/types.h> /* unistd.h needs this */
+#include <sys/stat.h>
+#include <sys/sysmacros.h>
+#include <unistd.h> /* contains read/write */
+#include <fcntl.h>
+#include <linux/a.out.h>
+#include <errno.h>
+
+#define MINIX_HEADER 32
+
+#define N_MAGIC_OFFSET 1024
+#ifndef __BFD__
+static int GCC_HEADER = sizeof(struct exec);
+#endif
+
+#ifdef __BIG_KERNEL__
+#define SYS_SIZE 0xffff
+#else
+#define SYS_SIZE DEF_SYSSIZE
+#endif
+
+#define DEFAULT_MAJOR_ROOT 0
+#define DEFAULT_MINOR_ROOT 0
+
+/* max nr of sectors of setup: don't change unless you also change
+ * bootsect etc */
+#define SETUP_SECTS 4
+
+#define STRINGIFY(x) #x
+
+typedef union {
+ int i;
+ long l;
+ short s[2];
+ char b[4];
+} conv;
+
+long intel_long(long l)
+{
+ conv t;
+
+ t.b[0] = l & 0xff; l >>= 8;
+ t.b[1] = l & 0xff; l >>= 8;
+ t.b[2] = l & 0xff; l >>= 8;
+ t.b[3] = l & 0xff; l >>= 8;
+ return t.l;
+}
+
+int intel_int(int i)
+{
+ conv t;
+
+ t.b[0] = i & 0xff; i >>= 8;
+ t.b[1] = i & 0xff; i >>= 8;
+ t.b[2] = i & 0xff; i >>= 8;
+ t.b[3] = i & 0xff; i >>= 8;
+ return t.i;
+}
+
+short intel_short(short l)
+{
+ conv t;
+
+ t.b[0] = l & 0xff; l >>= 8;
+ t.b[1] = l & 0xff; l >>= 8;
+ return t.s[0];
+}
+
+void die(const char * str)
+{
+ fprintf(stderr,"%s\n",str);
+ exit(1);
+}
+
+void usage(void)
+{
+ die("Usage: build bootsect setup system [rootdev] [> image]");
+}
+
+int main(int argc, char ** argv)
+{
+ int i,c,id,sz,tmp_int;
+ unsigned long sys_size, tmp_long;
+ char buf[1024];
+#ifndef __BFD__
+ struct exec *ex = (struct exec *)buf;
+#endif
+ char major_root, minor_root;
+ struct stat sb;
+ unsigned char setup_sectors;
+
+ if ((argc < 4) || (argc > 5))
+ usage();
+ if (argc > 4) {
+ if (!strcmp(argv[4], "CURRENT")) {
+ if (stat("/", &sb)) {
+ perror("/");
+ die("Couldn't stat /");
+ }
+ major_root = major(sb.st_dev);
+ minor_root = minor(sb.st_dev);
+ } else if (strcmp(argv[4], "FLOPPY")) {
+ if (stat(argv[4], &sb)) {
+ perror(argv[4]);
+ die("Couldn't stat root device.");
+ }
+ major_root = major(sb.st_rdev);
+ minor_root = minor(sb.st_rdev);
+ } else {
+ major_root = 0;
+ minor_root = 0;
+ }
+ } else {
+ major_root = DEFAULT_MAJOR_ROOT;
+ minor_root = DEFAULT_MINOR_ROOT;
+ }
+ fprintf(stderr, "Root device is (%d, %d)\n", major_root, minor_root);
+ for (i=0;i<sizeof buf; i++) buf[i]=0;
+ if ((id=open(argv[1],O_RDONLY,0))<0)
+ die("Unable to open 'boot'");
+ if (read(id,buf,MINIX_HEADER) != MINIX_HEADER)
+ die("Unable to read header of 'boot'");
+ if (((long *) buf)[0]!=intel_long(0x04100301))
+ die("Non-Minix header of 'boot'");
+ if (((long *) buf)[1]!=intel_long(MINIX_HEADER))
+ die("Non-Minix header of 'boot'");
+ if (((long *) buf)[3] != 0)
+ die("Illegal data segment in 'boot'");
+ if (((long *) buf)[4] != 0)
+ die("Illegal bss in 'boot'");
+ if (((long *) buf)[5] != 0)
+ die("Non-Minix header of 'boot'");
+ if (((long *) buf)[7] != 0)
+ die("Illegal symbol table in 'boot'");
+ i=read(id,buf,sizeof buf);
+ fprintf(stderr,"Boot sector %d bytes.\n",i);
+ if (i != 512)
+ die("Boot block must be exactly 512 bytes");
+ if ((*(unsigned short *)(buf+510)) != (unsigned short)intel_short(0xAA55))
+ die("Boot block hasn't got boot flag (0xAA55)");
+ buf[508] = (char) minor_root;
+ buf[509] = (char) major_root;
+ i=write(1,buf,512);
+ if (i!=512)
+ die("Write call failed");
+ close (id);
+
+ if ((id=open(argv[2],O_RDONLY,0))<0)
+ die("Unable to open 'setup'");
+ if (read(id,buf,MINIX_HEADER) != MINIX_HEADER)
+ die("Unable to read header of 'setup'");
+ if (((long *) buf)[0]!=intel_long(0x04100301))
+ die("Non-Minix header of 'setup'");
+ if (((long *) buf)[1]!=intel_long(MINIX_HEADER))
+ die("Non-Minix header of 'setup'");
+ if (((long *) buf)[3] != 0)
+ die("Illegal data segment in 'setup'");
+ if (((long *) buf)[4] != 0)
+ die("Illegal bss in 'setup'");
+ if (((long *) buf)[5] != 0)
+ die("Non-Minix header of 'setup'");
+ if (((long *) buf)[7] != 0)
+ die("Illegal symbol table in 'setup'");
+ for (i=0 ; (c=read(id,buf,sizeof buf))>0 ; i+=c )
+#ifdef __BIG_KERNEL__
+ {
+ if (!i) {
+ /* Working with memcpy because of alignment constraints
+ on Sparc - Gertjan */
+ memcpy(&tmp_long, &buf[2], sizeof(long));
+ if (tmp_long != intel_long(0x53726448) )
+ die("Wrong magic in loader header of 'setup'");
+ memcpy(&tmp_int, &buf[6], sizeof(int));
+ if (tmp_int < intel_int(0x200))
+ die("Wrong version of loader header of 'setup'");
+ buf[0x11] = 1; /* LOADED_HIGH */
+ tmp_long = intel_long(0x100000);
+ memcpy(&buf[0x14], &tmp_long, sizeof(long)); /* code32_start */
+ }
+#endif
+ if (write(1,buf,c)!=c)
+ die("Write call failed");
+#ifdef __BIG_KERNEL__
+ }
+#endif
+ if (c != 0)
+ die("read-error on 'setup'");
+ close (id);
+ setup_sectors = (unsigned char)((i + 511) / 512);
+ /* for compatibility with LILO */
+ if (setup_sectors < SETUP_SECTS)
+ setup_sectors = SETUP_SECTS;
+ fprintf(stderr,"Setup is %d bytes.\n",i);
+ for (c=0 ; c<sizeof(buf) ; c++)
+ buf[c] = '\0';
+ while (i < setup_sectors * 512) {
+ c = setup_sectors * 512 - i;
+ if (c > sizeof(buf))
+ c = sizeof(buf);
+ if (write(1,buf,c) != c)
+ die("Write call failed");
+ i += c;
+ }
+
+ if ((id=open(argv[3],O_RDONLY,0))<0)
+ die("Unable to open 'system'");
+#ifndef __BFD__
+ if (read(id,buf,GCC_HEADER) != GCC_HEADER)
+ die("Unable to read header of 'system'");
+ if (N_MAGIC(*ex) == ZMAGIC) {
+ GCC_HEADER = N_MAGIC_OFFSET;
+ lseek(id, GCC_HEADER, SEEK_SET);
+ } else if (N_MAGIC(*ex) != QMAGIC)
+ die("Non-GCC header of 'system'");
+ fprintf(stderr,"System is %d kB (%d kB code, %d kB data and %d kB bss)\n",
+ (ex->a_text+ex->a_data+ex->a_bss)/1024,
+ ex->a_text /1024,
+ ex->a_data /1024,
+ ex->a_bss /1024);
+ sz = N_SYMOFF(*ex) - GCC_HEADER + 4;
+#else
+ if (fstat (id, &sb)) {
+ perror ("fstat");
+ die ("Unable to stat 'system'");
+ }
+ sz = sb.st_size;
+ fprintf (stderr, "System is %d kB\n", sz/1024);
+#endif
+ sys_size = (sz + 15) / 16;
+ if (sys_size > SYS_SIZE)
+ die("System is too big");
+ while (sz > 0) {
+ int l, n;
+
+ l = sz;
+ if (l > sizeof(buf))
+ l = sizeof(buf);
+ if ((n=read(id, buf, l)) != l) {
+ if (n == -1)
+ perror(argv[1]);
+ else
+ fprintf(stderr, "Unexpected EOF\n");
+ die("Can't read 'system'");
+ }
+ if (write(1, buf, l) != l)
+ die("Write failed");
+ sz -= l;
+ }
+ close(id);
+ if (lseek(1, 497, 0) == 497) {
+ if (write(1, &setup_sectors, 1) != 1)
+ die("Write of setup sectors failed");
+ }
+ if (lseek(1,500,0) == 500) {
+ buf[0] = (sys_size & 0xff);
+ buf[1] = ((sys_size >> 8) & 0xff);
+ if (write(1, buf, 2) != 2)
+ die("Write failed");
+ }
+ return(0);
+}
diff --git a/arch/cris/arch-v10/defconfig b/arch/cris/arch-v10/defconfig
new file mode 100644
index 00000000000..2a3411eaace
--- /dev/null
+++ b/arch/cris/arch-v10/defconfig
@@ -0,0 +1,505 @@
+#
+# Automatically generated make config: don't edit
+#
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+
+#
+# General setup
+#
+CONFIG_NET=y
+CONFIG_SYSVIPC=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_SYSCTL is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_ETRAX_KGDB is not set
+# CONFIG_ETRAX_WATCHDOG is not set
+
+#
+# Hardware setup
+#
+CONFIG_ETRAX100LX=y
+# CONFIG_ETRAX100LX_V2 is not set
+# CONFIG_SVINTO_SIM is not set
+CONFIG_CRIS_LOW_MAP=y
+CONFIG_ETRAX_DRAM_VIRTUAL_BASE=60000000
+CONFIG_ETRAX_DRAM_SIZE=8
+CONFIG_ETRAX_FLASH_BUSWIDTH=2
+CONFIG_ETRAX_ROOT_DEVICE="/dev/mtdblock3"
+CONFIG_ETRAX_PA_LEDS=y
+# CONFIG_ETRAX_PB_LEDS is not set
+# CONFIG_ETRAX_CSP0_LEDS is not set
+# CONFIG_ETRAX_NO_LEDS is not set
+CONFIG_ETRAX_LED1G=2
+CONFIG_ETRAX_LED1R=2
+CONFIG_ETRAX_LED2G=2
+CONFIG_ETRAX_LED2R=2
+CONFIG_ETRAX_LED3R=2
+CONFIG_ETRAX_LED3G=2
+CONFIG_ETRAX_LED4R=2
+CONFIG_ETRAX_LED4G=2
+CONFIG_ETRAX_LED5R=2
+CONFIG_ETRAX_LED5G=2
+CONFIG_ETRAX_LED6R=2
+CONFIG_ETRAX_LED6G=2
+CONFIG_ETRAX_LED7R=2
+CONFIG_ETRAX_LED7G=2
+CONFIG_ETRAX_LED8Y=2
+CONFIG_ETRAX_LED9Y=2
+CONFIG_ETRAX_LED10Y=2
+CONFIG_ETRAX_LED11Y=2
+CONFIG_ETRAX_LED12R=2
+CONFIG_ETRAX_DEBUG_PORT0=y
+# CONFIG_ETRAX_DEBUG_PORT1 is not set
+# CONFIG_ETRAX_DEBUG_PORT2 is not set
+# CONFIG_ETRAX_DEBUG_PORT3 is not set
+CONFIG_ETRAX_RESCUE_SER0=y
+# CONFIG_ETRAX_RESCUE_SER1 is not set
+# CONFIG_ETRAX_RESCUE_SER2 is not set
+# CONFIG_ETRAX_RESCUE_SER3 is not set
+CONFIG_ETRAX_DEF_R_WAITSTATES=95a6
+CONFIG_ETRAX_DEF_R_BUS_CONFIG=104
+# CONFIG_ETRAX_SDRAM is not set
+CONFIG_ETRAX_DEF_R_DRAM_CONFIG=1a200040
+CONFIG_ETRAX_DEF_R_DRAM_TIMING=5611
+CONFIG_ETRAX_DEF_R_PORT_PA_DIR=1d
+CONFIG_ETRAX_DEF_R_PORT_PA_DATA=f0
+CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG=00
+CONFIG_ETRAX_DEF_R_PORT_PB_DIR=1e
+CONFIG_ETRAX_DEF_R_PORT_PB_DATA=f3
+# CONFIG_ETRAX_SOFT_SHUTDOWN is not set
+
+#
+# Drivers for ETRAX 100LX built-in interfaces
+#
+CONFIG_ETRAX_ETHERNET=y
+CONFIG_NET_ETHERNET=y
+# CONFIG_ETRAX_NETWORK_LED_ON_WHEN_LINK is not set
+CONFIG_ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY=y
+# CONFIG_ETRAX_ETHERNET_LPSLAVE is not set
+CONFIG_ETRAX_SERIAL=y
+CONFIG_ETRAX_SERIAL_PORT0=y
+# CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_ON_PB is not set
+CONFIG_ETRAX_SERIAL_PORT1=y
+# CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_ON_PB is not set
+# CONFIG_ETRAX_SERIAL_PORT2 is not set
+# CONFIG_ETRAX_SERIAL_PORT3 is not set
+# CONFIG_ETRAX_RS485 is not set
+# CONFIG_ETRAX_SYNCHRONOUS_SERIAL is not set
+# CONFIG_ETRAX_IDE is not set
+CONFIG_ETRAX_AXISFLASHMAP=y
+CONFIG_ETRAX_PTABLE_SECTOR=65536
+CONFIG_MTD=y
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_AMDSTD=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_ETRAX_I2C=y
+CONFIG_ETRAX_I2C_USES_PB_NOT_PB_I2C=y
+# CONFIG_ETRAX_I2C_EEPROM is not set
+CONFIG_ETRAX_GPIO=y
+CONFIG_ETRAX_PA_BUTTON_BITMASK=02
+CONFIG_ETRAX_PA_CHANGEABLE_DIR=00
+CONFIG_ETRAX_PA_CHANGEABLE_BITS=FF
+CONFIG_ETRAX_PB_CHANGEABLE_DIR=00
+CONFIG_ETRAX_PB_CHANGEABLE_BITS=FF
+# CONFIG_ETRAX_USB_HOST is not set
+# CONFIG_USB is not set
+# CONFIG_ETRAX_DS1302 is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC1000 is not set
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOCPROBE is not set
+
+#
+# RAM/ROM Device Drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_MTDRAM is not set
+
+#
+# Linearly Mapped Flash Device Drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_CFI_GEOMETRY is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_AMDSTD=y
+# CONFIG_MTD_SHARP is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_NORA is not set
+# CONFIG_MTD_PNC2000 is not set
+# CONFIG_MTD_RPXLITE is not set
+# CONFIG_MTD_SC520CDP is not set
+# CONFIG_MTD_SBC_MEDIAGX is not set
+# CONFIG_MTD_ELAN_104NC is not set
+# CONFIG_MTD_SA1100 is not set
+# CONFIG_MTD_DC21285 is not set
+# CONFIG_MTD_CSTM_CFI_JEDEC is not set
+# CONFIG_MTD_JEDEC is not set
+# CONFIG_MTD_MIXMEM is not set
+# CONFIG_MTD_OCTAGON is not set
+# CONFIG_MTD_VMAX is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_NAND_SPIA is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play configuration
+#
+# CONFIG_PNP is not set
+# CONFIG_ISAPNP is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_XD is not set
+# CONFIG_PARIDE is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_BLK_DEV_INITRD is not set
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+# CONFIG_NETLINK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_FILTER is not set
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_INET_ECN is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_IPV6 is not set
+# CONFIG_KHTTPD is not set
+# CONFIG_ATM is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_DECNET is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_LLC is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_HW_FLOWCONTROL is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+# CONFIG_PHONE_IXJ is not set
+
+#
+# ATA/IDE/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# IDE, ATA and ATAPI Block devices
+#
+# CONFIG_BLK_DEV_IDE is not set
+# CONFIG_BLK_DEV_HD_IDE is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_BLK_DEV_IDEDISK is not set
+# CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_BLK_DEV_IDECS is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_BLK_DEV_CMD640 is not set
+# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
+# CONFIG_BLK_DEV_ISAPNP is not set
+# CONFIG_IDE_CHIPSETS is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_IDE_MODES is not set
+
+#
+# SCSI support
+#
+# CONFIG_SCSI is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+# CONFIG_I2O_BLOCK is not set
+# CONFIG_I2O_LAN is not set
+# CONFIG_I2O_SCSI is not set
+# CONFIG_I2O_PROC is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_NET_SB1000 is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_LANCE is not set
+# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_NET_ISA is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_NET_POCKET is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PLIP is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+# CONFIG_NET_FC is not set
+# CONFIG_RCPCI is not set
+# CONFIG_SHAPER is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+
+#
+# Amateur Radio support
+#
+# CONFIG_HAMRADIO is not set
+
+#
+# IrDA (infrared) support
+#
+# CONFIG_IRDA is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# CD-ROM drivers (not for SCSI or IDE/ATAPI drives)
+#
+# CONFIG_CD_NO_IDESCSI is not set
+
+#
+# Input core support
+#
+# CONFIG_INPUT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL is not set
+# CONFIG_SERIAL_EXTENDED is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_UNIX98_PTYS is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Mice
+#
+# CONFIG_BUSMOUSE is not set
+# CONFIG_MOUSE is not set
+
+#
+# Joysticks
+#
+# CONFIG_JOYSTICK is not set
+# CONFIG_QIC02_TAPE is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_INTEL_RNG is not set
+# CONFIG_NVRAM is not set
+# CONFIG_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_FTAPE is not set
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# File systems
+#
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_ADFS_FS is not set
+# CONFIG_ADFS_FS_RW is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_FAT_FS is not set
+# CONFIG_MSDOS_FS is not set
+# CONFIG_UMSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_CRAMFS=y
+CONFIG_RAMFS=y
+# CONFIG_ISO9660_FS is not set
+# CONFIG_JOLIET is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_NTFS_FS is not set
+# CONFIG_NTFS_DEBUG is not set
+# CONFIG_NTFS_RW is not set
+# CONFIG_HPFS_FS is not set
+CONFIG_PROC_FS=y
+# CONFIG_DEVFS_FS is not set
+# CONFIG_DEVFS_MOUNT is not set
+# CONFIG_DEVFS_DEBUG is not set
+# CONFIG_DEVPTS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_QNX4FS_RW is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_EXT2_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_SYSV_FS_WRITE is not set
+# CONFIG_UDF_FS is not set
+# CONFIG_UDF_RW is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_UFS_FS_WRITE is not set
+
+#
+# Network File Systems
+#
+# CONFIG_CODA_FS is not set
+# CONFIG_NFS_FS is not set
+# CONFIG_NFS_V3 is not set
+# CONFIG_ROOT_NFS is not set
+# CONFIG_NFSD is not set
+# CONFIG_NFSD_V3 is not set
+# CONFIG_SUNRPC is not set
+# CONFIG_LOCKD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_NCPFS_PACKET_SIGNING is not set
+# CONFIG_NCPFS_IOCTL_LOCKING is not set
+# CONFIG_NCPFS_STRONG is not set
+# CONFIG_NCPFS_NFS_NS is not set
+# CONFIG_NCPFS_OS2_NS is not set
+# CONFIG_NCPFS_SMALLDOS is not set
+# CONFIG_NCPFS_MOUNT_SUBDIR is not set
+# CONFIG_NCPFS_NDS_DOMAINS is not set
+# CONFIG_NCPFS_NLS is not set
+# CONFIG_NCPFS_EXTRAS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+# CONFIG_USB is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PROFILE is not set
diff --git a/arch/cris/arch-v10/drivers/Kconfig b/arch/cris/arch-v10/drivers/Kconfig
new file mode 100644
index 00000000000..748374f25b8
--- /dev/null
+++ b/arch/cris/arch-v10/drivers/Kconfig
@@ -0,0 +1,963 @@
+config ETRAX_ETHERNET
+ bool "Ethernet support"
+ depends on ETRAX_ARCH_V10
+ help
+ This option enables the ETRAX 100LX built-in 10/100Mbit Ethernet
+ controller.
+
+# this is just so that the user does not have to go into the
+# normal ethernet driver section just to enable ethernetworking
+config NET_ETHERNET
+ bool
+ depends on ETRAX_ETHERNET
+ default y
+
+choice
+ prompt "Network LED behavior"
+ depends on ETRAX_ETHERNET
+ default ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY
+
+config ETRAX_NETWORK_LED_ON_WHEN_LINK
+ bool "LED_on_when_link"
+ help
+ Selecting LED_on_when_link will light the LED when there is a
+ connection and will flash off when there is activity.
+
+ Selecting LED_on_when_activity will light the LED only when
+ there is activity.
+
+ This setting will also affect the behaviour of other activity LEDs
+ e.g. Bluetooth.
+
+config ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY
+ bool "LED_on_when_activity"
+ help
+ Selecting LED_on_when_link will light the LED when there is a
+ connection and will flash off when there is activity.
+
+ Selecting LED_on_when_activity will light the LED only when
+ there is activity.
+
+ This setting will also affect the behaviour of other activity LEDs
+ e.g. Bluetooth.
+
+endchoice
+
+config ETRAX_SERIAL
+ bool "Serial-port support"
+ depends on ETRAX_ARCH_V10
+ help
+ Enables the ETRAX 100 serial driver for ser0 (ttyS0)
+ You probably want this enabled.
+
+config ETRAX_SERIAL_FAST_TIMER
+ bool "Use fast timers for serial DMA flush (experimental)"
+ depends on ETRAX_SERIAL
+ help
+ Select this to have the serial DMAs flushed at a higher rate than
+ normally, possible by using the fast timer API, the timeout is
+ approx. 4 character times.
+ If unsure, say N.
+
+config ETRAX_SERIAL_FLUSH_DMA_FAST
+ bool "Fast serial port DMA flush"
+ depends on ETRAX_SERIAL && !ETRAX_SERIAL_FAST_TIMER
+ help
+ Select this to have the serial DMAs flushed at a higher rate than
+ normally possible through a fast timer interrupt (currently at
+ 15360 Hz).
+ If unsure, say N.
+
+config ETRAX_SERIAL_RX_TIMEOUT_TICKS
+ int "Receive flush timeout (ticks) "
+ depends on ETRAX_SERIAL && !ETRAX_SERIAL_FAST_TIMER && !ETRAX_SERIAL_FLUSH_DMA_FAST
+ default "5"
+ help
+ Number of timer ticks between flush of receive fifo (1 tick = 10ms).
+ Try 0-3 for low latency applications. Approx 5 for high load
+ applications (e.g. PPP). Maybe this should be more adaptive some
+ day...
+
+config ETRAX_SERIAL_PORT0
+ bool "Serial port 0 enabled"
+ depends on ETRAX_SERIAL
+ help
+ Enables the ETRAX 100 serial driver for ser0 (ttyS0)
+ Normally you want this on, unless you use external DMA 1 that uses
+ the same DMA channels.
+
+choice
+ prompt "Ser0 DMA out assignment"
+ depends on ETRAX_SERIAL_PORT0
+ default ETRAX_SERIAL_PORT0_DMA6_OUT
+
+config CONFIG_ETRAX_SERIAL_PORT0_NO_DMA_OUT
+ bool "No DMA out"
+
+config CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT
+ bool "DMA 6"
+
+endchoice
+
+choice
+ prompt "Ser0 DMA in assignment"
+ depends on ETRAX_SERIAL_PORT0
+ default ETRAX_SERIAL_PORT0_DMA7_IN
+
+config CONFIG_ETRAX_SERIAL_PORT0_NO_DMA_IN
+ bool "No DMA in"
+
+config CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN
+ bool "DMA 7"
+
+endchoice
+
+choice
+ prompt "Ser0 DTR, RI, DSR and CD assignment"
+ depends on ETRAX_SERIAL_PORT0
+ default ETRAX_SER0_DTR_RI_DSR_CD_ON_NONE
+
+config ETRAX_SER0_DTR_RI_DSR_CD_ON_NONE
+ bool "No_DTR_RI_DSR_CD"
+
+config ETRAX_SER0_DTR_RI_DSR_CD_ON_PA
+ bool "DTR_RI_DSR_CD_on_PA"
+
+config ETRAX_SER0_DTR_RI_DSR_CD_ON_PB
+ bool "DTR_RI_DSR_CD_on_PB"
+ help
+ Enables the status and control signals DTR, RI, DSR and CD on PB for
+ ser0.
+
+config ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+ bool "DTR_RI_DSR_CD_mixed_on_PA_and_PB"
+
+endchoice
+
+config ETRAX_SER0_DTR_ON_PA_BIT
+ int "Ser0 DTR on PA bit (-1 = not used)" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PA || ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+ depends on ETRAX_SERIAL_PORT0
+ default "-1" if !ETRAX_SER0_DTR_RI_DSR_CD_ON_PA && !ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+ default "4" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PA || ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+
+config ETRAX_SER0_RI_ON_PA_BIT
+ int "Ser0 RI on PA bit (-1 = not used)" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PA || ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+ depends on ETRAX_SERIAL_PORT0
+ default "-1" if !ETRAX_SER0_DTR_RI_DSR_CD_ON_PA && !ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+ default "5" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PA || ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+
+config ETRAX_SER0_DSR_ON_PA_BIT
+ int "Ser0 DSR on PA bit (-1 = not used)" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PA || ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+ depends on ETRAX_SERIAL_PORT0
+ default "-1" if !ETRAX_SER0_DTR_RI_DSR_CD_ON_PA && !ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+ default "6" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PA || ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+
+config ETRAX_SER0_CD_ON_PA_BIT
+ int "Ser0 CD on PA bit (-1 = not used)" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PA || ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+ depends on ETRAX_SERIAL_PORT0
+ default "-1" if !ETRAX_SER0_DTR_RI_DSR_CD_ON_PA && !ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+ default "7" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PA || ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+
+config ETRAX_SER0_DTR_ON_PB_BIT
+ int "Ser0 DTR on PB bit (-1 = not used)" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PB || ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+ depends on ETRAX_SERIAL_PORT0
+ default "-1" if !ETRAX_SER0_DTR_RI_DSR_CD_ON_PB && !ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+ default "4" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PB || ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+ help
+ Specify the pin of the PB port to carry the DTR signal for serial
+ port 0.
+
+config ETRAX_SER0_RI_ON_PB_BIT
+ int "Ser0 RI on PB bit (-1 = not used)" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PB || ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+ depends on ETRAX_SERIAL_PORT0
+ default "-1" if !ETRAX_SER0_DTR_RI_DSR_CD_ON_PB && !ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+ default "5" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PB || ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+ help
+ Specify the pin of the PB port to carry the RI signal for serial
+ port 0.
+
+config ETRAX_SER0_DSR_ON_PB_BIT
+ int "Ser0 DSR on PB bit (-1 = not used)" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PB || ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+ depends on ETRAX_SERIAL_PORT0
+ default "-1" if !ETRAX_SER0_DTR_RI_DSR_CD_ON_PB && !ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+ default "6" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PB || ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+ help
+ Specify the pin of the PB port to carry the DSR signal for serial
+ port 0.
+
+config ETRAX_SER0_CD_ON_PB_BIT
+ int "Ser0 CD on PB bit (-1 = not used)" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PB || ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+ depends on ETRAX_SERIAL_PORT0
+ default "-1" if !ETRAX_SER0_DTR_RI_DSR_CD_ON_PB && !ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+ default "7" if ETRAX_SER0_DTR_RI_DSR_CD_ON_PB || ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+ help
+ Specify the pin of the PB port to carry the CD signal for serial
+ port 0.
+
+config ETRAX_SERIAL_PORT1
+ bool "Serial port 1 enabled"
+ depends on ETRAX_SERIAL
+ help
+ Enables the ETRAX 100 serial driver for ser1 (ttyS1).
+
+choice
+ prompt "Ser1 DMA out assignment"
+ depends on ETRAX_SERIAL_PORT1
+ default ETRAX_SERIAL_PORT1_DMA8_OUT
+
+config CONFIG_ETRAX_SERIAL_PORT1_NO_DMA_OUT
+ bool "No DMA out"
+
+config CONFIG_ETRAX_SERIAL_PORT1_DMA8_OUT
+ bool "DMA 8"
+
+endchoice
+
+choice
+ prompt "Ser1 DMA in assignment"
+ depends on ETRAX_SERIAL_PORT1
+ default ETRAX_SERIAL_PORT1_DMA9_IN
+
+config CONFIG_ETRAX_SERIAL_PORT1_NO_DMA_IN
+ bool "No DMA in"
+
+config CONFIG_ETRAX_SERIAL_PORT1_DMA9_IN
+ bool "DMA 9"
+
+endchoice
+
+choice
+ prompt "Ser1 DTR, RI, DSR and CD assignment"
+ depends on ETRAX_SERIAL_PORT1
+ default ETRAX_SER1_DTR_RI_DSR_CD_ON_NONE
+
+config ETRAX_SER1_DTR_RI_DSR_CD_ON_NONE
+ bool "No_DTR_RI_DSR_CD"
+
+config ETRAX_SER1_DTR_RI_DSR_CD_ON_PA
+ bool "DTR_RI_DSR_CD_on_PA"
+
+config ETRAX_SER1_DTR_RI_DSR_CD_ON_PB
+ bool "DTR_RI_DSR_CD_on_PB"
+ help
+ Enables the status and control signals DTR, RI, DSR and CD on PB for
+ ser1.
+
+config ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+ bool "DTR_RI_DSR_CD_mixed_on_PA_and_PB"
+
+endchoice
+
+config ETRAX_SER1_DTR_ON_PA_BIT
+ int "Ser1 DTR on PA bit (-1 = not used)" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PA || ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+ depends on ETRAX_SERIAL_PORT1
+ default "-1" if !ETRAX_SER1_DTR_RI_DSR_CD_ON_PA && !ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+ default "4" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PA || ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+
+config ETRAX_SER1_RI_ON_PA_BIT
+ int "Ser1 RI on PA bit (-1 = not used)" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PA || ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+ depends on ETRAX_SERIAL_PORT1
+ default "-1" if !ETRAX_SER1_DTR_RI_DSR_CD_ON_PA && !ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+ default "5" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PA || ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+
+config ETRAX_SER1_DSR_ON_PA_BIT
+ int "Ser1 DSR on PA bit (-1 = not used)" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PA || ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+ depends on ETRAX_SERIAL_PORT1
+ default "-1" if !ETRAX_SER1_DTR_RI_DSR_CD_ON_PA && !ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+ default "6" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PA || ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+
+config ETRAX_SER1_CD_ON_PA_BIT
+ int "Ser1 CD on PA bit (-1 = not used)" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PA || ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+ depends on ETRAX_SERIAL_PORT1
+ default "-1" if !ETRAX_SER1_DTR_RI_DSR_CD_ON_PA && !ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+ default "7" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PA || ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+
+config ETRAX_SER1_DTR_ON_PB_BIT
+ int "Ser1 DTR on PB bit (-1 = not used)" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PB || ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+ depends on ETRAX_SERIAL_PORT1
+ default "-1" if !ETRAX_SER1_DTR_RI_DSR_CD_ON_PB && !ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+ default "4" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PB || ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+ help
+ Specify the pin of the PB port to carry the DTR signal for serial
+ port 1.
+
+config ETRAX_SER1_RI_ON_PB_BIT
+ int "Ser1 RI on PB bit (-1 = not used)" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PB || ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+ depends on ETRAX_SERIAL_PORT1
+ default "-1" if !ETRAX_SER1_DTR_RI_DSR_CD_ON_PB && !ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+ default "5" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PB || ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+ help
+ Specify the pin of the PB port to carry the RI signal for serial
+ port 1.
+
+config ETRAX_SER1_DSR_ON_PB_BIT
+ int "Ser1 DSR on PB bit (-1 = not used)" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PB || ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+ depends on ETRAX_SERIAL_PORT1
+ default "-1" if !ETRAX_SER1_DTR_RI_DSR_CD_ON_PB && !ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+ default "6" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PB || ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+ help
+ Specify the pin of the PB port to carry the DSR signal for serial
+ port 1.
+
+config ETRAX_SER1_CD_ON_PB_BIT
+ int "Ser1 CD on PB bit (-1 = not used)" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PB || ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+ depends on ETRAX_SERIAL_PORT1
+ default "-1" if !ETRAX_SER1_DTR_RI_DSR_CD_ON_PB && !ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+ default "7" if ETRAX_SER1_DTR_RI_DSR_CD_ON_PB || ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+ help
+ Specify the pin of the PB port to carry the CD signal for serial
+ port 1.
+
+comment "Make sure you dont have the same PB bits more than once!"
+ depends on ETRAX_SERIAL && ETRAX_SER0_DTR_RI_DSR_CD_ON_PB && ETRAX_SER1_DTR_RI_DSR_CD_ON_PB
+
+config ETRAX_SERIAL_PORT2
+ bool "Serial port 2 enabled"
+ depends on ETRAX_SERIAL
+ help
+ Enables the ETRAX 100 serial driver for ser2 (ttyS2).
+
+choice
+ prompt "Ser2 DMA out assignment"
+ depends on ETRAX_SERIAL_PORT2
+ default ETRAX_SERIAL_PORT2_DMA2_OUT
+
+config CONFIG_ETRAX_SERIAL_PORT2_NO_DMA_OUT
+ bool "No DMA out"
+
+config CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT
+ bool "DMA 2"
+
+endchoice
+
+choice
+ prompt "Ser2 DMA in assignment"
+ depends on ETRAX_SERIAL_PORT2
+ default ETRAX_SERIAL_PORT2_DMA3_IN
+
+config CONFIG_ETRAX_SERIAL_PORT2_NO_DMA_IN
+ bool "No DMA in"
+
+config CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN
+ bool "DMA 3"
+
+endchoice
+
+choice
+ prompt "Ser2 DTR, RI, DSR and CD assignment"
+ depends on ETRAX_SERIAL_PORT2
+ default ETRAX_SER2_DTR_RI_DSR_CD_ON_NONE
+
+config ETRAX_SER2_DTR_RI_DSR_CD_ON_NONE
+ bool "No_DTR_RI_DSR_CD"
+
+config ETRAX_SER2_DTR_RI_DSR_CD_ON_PA
+ bool "DTR_RI_DSR_CD_on_PA"
+ help
+ Enables the status and control signals DTR, RI, DSR and CD on PA for
+ ser2.
+
+config ETRAX_SER2_DTR_RI_DSR_CD_ON_PB
+ bool "DTR_RI_DSR_CD_on_PB"
+
+config ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+ bool "DTR_RI_DSR_CD_mixed_on_PA_and_PB"
+
+endchoice
+
+config ETRAX_SER2_DTR_ON_PA_BIT
+ int "Ser2 DTR on PA bit (-1 = not used)" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PA || ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+ depends on ETRAX_SERIAL_PORT2
+ default "-1" if !ETRAX_SER2_DTR_RI_DSR_CD_ON_PA && !ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+ default "4" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PA || ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+ help
+ Specify the pin of the PA port to carry the DTR signal for serial
+ port 2.
+
+config ETRAX_SER2_RI_ON_PA_BIT
+ int "Ser2 RI on PA bit (-1 = not used)" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PA || ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+ depends on ETRAX_SERIAL_PORT2
+ default "-1" if !ETRAX_SER2_DTR_RI_DSR_CD_ON_PA && !ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+ default "5" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PA || ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+ help
+ Specify the pin of the PA port to carry the RI signal for serial
+ port 2.
+
+config ETRAX_SER2_DSR_ON_PA_BIT
+ int "Ser2 DSR on PA bit (-1 = not used)" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PA || ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+ depends on ETRAX_SERIAL_PORT2
+ default "-1" if !ETRAX_SER2_DTR_RI_DSR_CD_ON_PA && !ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+ default "6" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PA || ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+ help
+ Specify the pin of the PA port to carry the DTR signal for serial
+ port 2.
+
+config ETRAX_SER2_CD_ON_PA_BIT
+ int "Ser2 CD on PA bit (-1 = not used)" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PA || ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+ depends on ETRAX_SERIAL_PORT2
+ default "-1" if !ETRAX_SER2_DTR_RI_DSR_CD_ON_PA && !ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+ default "7" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PA || ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+ help
+ Specify the pin of the PA port to carry the CD signal for serial
+ port 2.
+
+config ETRAX_SER2_DTR_ON_PB_BIT
+ int "Ser2 DTR on PB bit (-1 = not used)" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PB || ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+ depends on ETRAX_SERIAL_PORT2
+ default "-1" if !ETRAX_SER2_DTR_RI_DSR_CD_ON_PB && !ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+ default "4" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PB || ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+
+config ETRAX_SER2_RI_ON_PB_BIT
+ int "Ser2 RI on PB bit (-1 = not used)" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PB || ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+ depends on ETRAX_SERIAL_PORT2
+ default "-1" if !ETRAX_SER2_DTR_RI_DSR_CD_ON_PB && !ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+ default "5" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PB || ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+
+config ETRAX_SER2_DSR_ON_PB_BIT
+ int "Ser2 DSR on PB bit (-1 = not used)" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PB || ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+ depends on ETRAX_SERIAL_PORT2
+ default "-1" if !ETRAX_SER2_DTR_RI_DSR_CD_ON_PB && !ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+ default "6" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PB || ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+
+config ETRAX_SER2_CD_ON_PB_BIT
+ int "Ser2 CD on PB bit (-1 = not used)" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PB || ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+ depends on ETRAX_SERIAL_PORT2
+ default "-1" if !ETRAX_SER2_DTR_RI_DSR_CD_ON_PB && !ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+ default "7" if ETRAX_SER2_DTR_RI_DSR_CD_ON_PB || ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+
+config ETRAX_SERIAL_PORT3
+ bool "Serial port 3 enabled"
+ depends on ETRAX_SERIAL
+ help
+ Enables the ETRAX 100 serial driver for ser3 (ttyS3).
+
+choice
+ prompt "Ser3 DMA out assignment"
+ depends on ETRAX_SERIAL_PORT3
+ default ETRAX_SERIAL_PORT3_DMA4_OUT
+
+config CONFIG_ETRAX_SERIAL_PORT3_NO_DMA_OUT
+ bool "No DMA out"
+
+config CONFIG_ETRAX_SERIAL_PORT3_DMA4_OUT
+ bool "DMA 4"
+
+endchoice
+
+choice
+ prompt "Ser3 DMA in assignment"
+ depends on ETRAX_SERIAL_PORT3
+ default ETRAX_SERIAL_PORT3_DMA5_IN
+
+config CONFIG_ETRAX_SERIAL_PORT3_NO_DMA_IN
+ bool "No DMA in"
+
+config CONFIG_ETRAX_SERIAL_PORT3_DMA5_IN
+ bool "DMA 5"
+
+endchoice
+
+choice
+ prompt "Ser3 DTR, RI, DSR and CD assignment"
+ depends on ETRAX_SERIAL_PORT3
+ default ETRAX_SER3_DTR_RI_DSR_CD_ON_NONE
+
+config ETRAX_SER3_DTR_RI_DSR_CD_ON_NONE
+ bool "No_DTR_RI_DSR_CD"
+
+config ETRAX_SER3_DTR_RI_DSR_CD_ON_PA
+ bool "DTR_RI_DSR_CD_on_PA"
+
+config ETRAX_SER3_DTR_RI_DSR_CD_ON_PB
+ bool "DTR_RI_DSR_CD_on_PB"
+
+config ETRAX_SER3_DTR_RI_DSR_CD_MIXED
+ bool "DTR_RI_DSR_CD_mixed_on_PA_and_PB"
+
+endchoice
+
+config ETRAX_SER3_DTR_ON_PA_BIT
+ int "Ser3 DTR on PA bit (-1 = not used)" if ETRAX_SER3_DTR_RI_DSR_CD_ON_PA || ETRAX_SER3_DTR_RI_DSR_CD_MIXED
+ depends on ETRAX_SERIAL_PORT3
+ default "-1"
+
+config ETRAX_SER3_RI_ON_PA_BIT
+ int "Ser3 RI on PA bit (-1 = not used)" if ETRAX_SER3_DTR_RI_DSR_CD_ON_PA || ETRAX_SER3_DTR_RI_DSR_CD_MIXED
+ depends on ETRAX_SERIAL_PORT3
+ default "-1"
+
+config ETRAX_SER3_DSR_ON_PA_BIT
+ int "Ser3 DSR on PA bit (-1 = not used)" if ETRAX_SER3_DTR_RI_DSR_CD_ON_PA || ETRAX_SER3_DTR_RI_DSR_CD_MIXED
+ depends on ETRAX_SERIAL_PORT3
+ default "-1"
+
+config ETRAX_SER3_CD_ON_PA_BIT
+ int "Ser3 CD on PA bit (-1 = not used)" if ETRAX_SER3_DTR_RI_DSR_CD_ON_PA || ETRAX_SER3_DTR_RI_DSR_CD_MIXED
+ depends on ETRAX_SERIAL_PORT3
+ default "-1"
+
+config ETRAX_SER3_DTR_ON_PB_BIT
+ int "Ser3 DTR on PB bit (-1 = not used)" if ETRAX_SER3_DTR_RI_DSR_CD_ON_PB || ETRAX_SER3_DTR_RI_DSR_CD_MIXED
+ depends on ETRAX_SERIAL_PORT3
+ default "-1"
+
+config ETRAX_SER3_RI_ON_PB_BIT
+ int "Ser3 RI on PB bit (-1 = not used)" if ETRAX_SER3_DTR_RI_DSR_CD_ON_PB || ETRAX_SER3_DTR_RI_DSR_CD_MIXED
+ depends on ETRAX_SERIAL_PORT3
+ default "-1"
+
+config ETRAX_SER3_DSR_ON_PB_BIT
+ int "Ser3 DSR on PB bit (-1 = not used)" if ETRAX_SER3_DTR_RI_DSR_CD_ON_PB || ETRAX_SER3_DTR_RI_DSR_CD_MIXED
+ depends on ETRAX_SERIAL_PORT3
+ default "-1"
+
+config ETRAX_SER3_CD_ON_PB_BIT
+ int "Ser3 CD on PB bit (-1 = not used)" if ETRAX_SER3_DTR_RI_DSR_CD_ON_PB || ETRAX_SER3_DTR_RI_DSR_CD_MIXED
+ depends on ETRAX_SERIAL_PORT3
+ default "-1"
+
+config ETRAX_RS485
+ bool "RS-485 support"
+ depends on ETRAX_SERIAL
+ help
+ Enables support for RS-485 serial communication. For a primer on
+ RS-485, see <http://www.hw.cz/english/docs/rs485/rs485.html>.
+
+config ETRAX_RS485_ON_PA
+ bool "RS-485 mode on PA"
+ depends on ETRAX_RS485
+ help
+ Control Driver Output Enable on RS485 transceiver using a pin on PA
+ port:
+ Axis 2400/2401 uses PA 3.
+
+config ETRAX_RS485_ON_PA_BIT
+ int "RS-485 mode on PA bit"
+ depends on ETRAX_RS485_ON_PA
+ default "3"
+ help
+ Control Driver Output Enable on RS485 transceiver using a this bit
+ on PA port.
+
+config ETRAX_RS485_DISABLE_RECEIVER
+ bool "Disable serial receiver"
+ depends on ETRAX_RS485
+ help
+ It's necessary to disable the serial receiver to avoid serial
+ loopback. Not all products are able to do this in software only.
+ Axis 2400/2401 must disable receiver.
+
+config ETRAX_IDE
+ bool "ATA/IDE support"
+ select IDE
+ select BLK_DEV_IDE
+ select BLK_DEV_IDEDISK
+ select BLK_DEV_IDECD
+ select BLK_DEV_IDEDMA
+ select DMA_NONPCI
+ help
+ Enable this to get support for ATA/IDE.
+ You can't use paralell ports or SCSI ports
+ at the same time.
+
+
+config ETRAX_IDE_DELAY
+ int "Delay for drives to regain consciousness"
+ depends on ETRAX_IDE
+ default 15
+ help
+ Number of seconds to wait for IDE drives to spin up after an IDE
+ reset.
+choice
+ prompt "IDE reset pin"
+ depends on ETRAX_IDE
+ default ETRAX_IDE_PB7_RESET
+
+config ETRAX_IDE_PB7_RESET
+ bool "Port_PB_Bit_7"
+ help
+ IDE reset on pin 7 on port B
+
+config ETRAX_IDE_G27_RESET
+ bool "Port_G_Bit_27"
+ help
+ IDE reset on pin 27 on port G
+
+endchoice
+
+
+config ETRAX_USB_HOST
+ bool "USB host"
+ help
+ This option enables the host functionality of the ETRAX 100LX
+ built-in USB controller. In host mode the controller is designed
+ for CTRL and BULK traffic only, INTR traffic may work as well
+ however (depending on the requirements of timeliness).
+
+config USB
+ tristate
+ depends on ETRAX_USB_HOST
+ default y
+
+config ETRAX_USB_HOST_PORT1
+ bool " USB port 1 enabled"
+ depends on ETRAX_USB_HOST
+ default n
+
+config ETRAX_USB_HOST_PORT2
+ bool " USB port 2 enabled"
+ depends on ETRAX_USB_HOST
+ default n
+
+config ETRAX_AXISFLASHMAP
+ bool "Axis flash-map support"
+ depends on ETRAX_ARCH_V10
+ help
+ This option enables MTD mapping of flash devices. Needed to use
+ flash memories. If unsure, say Y.
+
+config ETRAX_PTABLE_SECTOR
+ int "Byte-offset of partition table sector"
+ depends on ETRAX_AXISFLASHMAP
+ default "65536"
+ help
+ Byte-offset of the partition table in the first flash chip.
+ The default value is 64kB and should not be changed unless
+ you know exactly what you are doing. The only valid reason
+ for changing this is when the flash block size is bigger
+ than 64kB (e.g. when using two parallel 16 bit flashes).
+
+# here we define the CONFIG_'s necessary to enable MTD support
+# for the flash
+config MTD
+ tristate
+ depends on ETRAX_AXISFLASHMAP
+ default y
+ help
+ Memory Technology Devices are flash, RAM and similar chips, often
+ used for solid state file systems on embedded devices. This option
+ will provide the generic support for MTD drivers to register
+ themselves with the kernel and for potential users of MTD devices
+ to enumerate the devices which are present and obtain a handle on
+ them. It will also allow you to select individual drivers for
+ particular hardware and users of MTD devices. If unsure, say N.
+
+config MTD_CFI
+ tristate
+ depends on ETRAX_AXISFLASHMAP
+ default y
+ help
+ The Common Flash Interface specification was developed by Intel,
+ AMD and other flash manufactures that provides a universal method
+ for probing the capabilities of flash devices. If you wish to
+ support any device that is CFI-compliant, you need to enable this
+ option. Visit <http://www.amd.com/products/nvd/overview/cfi.html>
+ for more information on CFI.
+
+config MTD_CFI_AMDSTD
+ tristate
+ depends on ETRAX_AXISFLASHMAP
+ default y
+ help
+ The Common Flash Interface defines a number of different command
+ sets which a CFI-compliant chip may claim to implement. This code
+ provides support for one of those command sets, used on chips
+ chips including the AMD Am29LV320.
+
+config MTD_OBSOLETE_CHIPS
+ bool
+ depends on ETRAX_AXISFLASHMAP
+ default y
+ help
+ This option does not enable any code directly, but will allow you to
+ select some other chip drivers which are now considered obsolete,
+ because the generic CONFIG_JEDEC_PROBE code above should now detect
+ the chips which are supported by these drivers, and allow the generic
+ CFI-compatible drivers to drive the chips. Say 'N' here unless you have
+ already tried the CONFIG_JEDEC_PROBE method and reported its failure
+ to the MTD mailing list at <linux-mtd@lists.infradead.org>
+
+config MTD_AMDSTD
+ tristate
+ depends on ETRAX_AXISFLASHMAP
+ default y
+ help
+ This option enables support for flash chips using AMD-compatible
+ commands, including some which are not CFI-compatible and hence
+ cannot be used with the CONFIG_MTD_CFI_AMDSTD option.
+
+ It also works on AMD compatible chips that do conform to CFI.
+
+config MTD_CHAR
+ tristate
+ depends on ETRAX_AXISFLASHMAP
+ default y
+ help
+ This provides a character device for each MTD device present in
+ the system, allowing the user to read and write directly to the
+ memory chips, and also use ioctl() to obtain information about
+ the device, or to erase parts of it.
+
+config MTD_BLOCK
+ tristate
+ depends on ETRAX_AXISFLASHMAP
+ default y
+ ---help---
+ Although most flash chips have an erase size too large to be useful
+ as block devices, it is possible to use MTD devices which are based
+ on RAM chips in this manner. This block device is a user of MTD
+ devices performing that function.
+
+ At the moment, it is also required for the Journalling Flash File
+ System(s) to obtain a handle on the MTD device when it's mounted
+ (although JFFS and JFFS2 don't actually use any of the functionality
+ of the mtdblock device).
+
+ Later, it may be extended to perform read/erase/modify/write cycles
+ on flash chips to emulate a smaller block size. Needless to say,
+ this is very unsafe, but could be useful for file systems which are
+ almost never written to.
+
+ You do not need this option for use with the DiskOnChip devices. For
+ those, enable NFTL support (CONFIG_NFTL) instead.
+
+config MTD_PARTITIONS
+ tristate
+ depends on ETRAX_AXISFLASHMAP
+ default y
+ help
+ If you have a device which needs to divide its flash chip(s) up
+ into multiple 'partitions', each of which appears to the user as
+ a separate MTD device, you require this option to be enabled. If
+ unsure, say 'Y'.
+
+ Note, however, that you don't need this option for the DiskOnChip
+ devices. Partitioning on NFTL 'devices' is a different - that's the
+ 'normal' form of partitioning used on a block device.
+
+config MTD_CONCAT
+ tristate
+ depends on ETRAX_AXISFLASHMAP
+ default y
+
+config ETRAX_I2C
+ bool "I2C support"
+ depends on ETRAX_ARCH_V10
+ help
+ Enables an I2C driver on ETRAX100.
+ EXAMPLE usage:
+ i2c_arg = I2C_WRITEARG(STA013_WRITE_ADDR, reg, val);
+ ioctl(fd, _IO(ETRAXI2C_IOCTYPE, I2C_WRITEREG), i2c_arg);
+ i2c_arg = I2C_READARG(STA013_READ_ADDR, reg);
+ val = ioctl(fd, _IO(ETRAXI2C_IOCTYPE, I2C_READREG), i2c_arg);
+
+# this is true for most products since PB-I2C seems to be somewhat
+# flawed..
+config ETRAX_I2C_USES_PB_NOT_PB_I2C
+ bool "I2C uses PB not PB-I2C"
+ depends on ETRAX_I2C
+ help
+ Select whether to use the special I2C mode in the PB I/O register or
+ not. This option needs to be selected in order to use some drivers
+ that access the I2C I/O pins directly instead of going through the
+ I2C driver, like the DS1302 realtime-clock driver. If you are
+ uncertain, choose Y here.
+
+config ETRAX_I2C_DATA_PORT
+ int "I2C SDA bit number"
+ depends on ETRAX_I2C_USES_PB_NOT_PB_I2C
+ default "0"
+ help
+ Selects the pin on Port B where the data pin is connected
+
+config ETRAX_I2C_CLK_PORT
+ int "I2C SCL bit number"
+ depends on ETRAX_I2C_USES_PB_NOT_PB_I2C
+ default "1"
+ help
+ Select the pin on Port B where the clock pin is connected
+
+config ETRAX_I2C_EEPROM
+ bool "I2C EEPROM (non-volatile RAM) support"
+ depends on ETRAX_I2C
+ help
+ Enables I2C EEPROM (non-volatile RAM) on PB0 and PB1 using the I2C
+ driver. Select size option: Probed, 2k, 8k, 16k.
+ (Probing works for 2k and 8k but not that well for 16k)
+
+choice
+ prompt "EEPROM size"
+ depends on ETRAX_I2C_EEPROM
+ default ETRAX_I2C_EEPROM_PROBE
+
+config ETRAX_I2C_EEPROM_PROBE
+ bool "Probed"
+ help
+ Specifies size or auto probe of the EEPROM size.
+ Options: Probed, 2k, 8k, 16k.
+ (Probing works for 2k and 8k but not that well for 16k)
+
+config ETRAX_I2C_EEPROM_2KB
+ bool "2kB"
+ help
+ Use a 2kB EEPROM.
+
+config ETRAX_I2C_EEPROM_8KB
+ bool "8kB"
+ help
+ Use a 8kB EEPROM.
+
+config ETRAX_I2C_EEPROM_16KB
+ bool "16kB"
+ help
+ Use a 16kB EEPROM.
+
+endchoice
+
+config ETRAX_GPIO
+ bool "GPIO support"
+ depends on ETRAX_ARCH_V10
+ ---help---
+ Enables the ETRAX general port device (major 120, minors 0 and 1).
+ You can use this driver to access the general port bits. It supports
+ these ioctl's:
+ #include <linux/etraxgpio.h>
+ fd = open("/dev/gpioa", O_RDWR); // or /dev/gpiob
+ ioctl(fd, _IO(ETRAXGPIO_IOCTYPE, IO_SETBITS), bits_to_set);
+ ioctl(fd, _IO(ETRAXGPIO_IOCTYPE, IO_CLRBITS), bits_to_clear);
+ val = ioctl(fd, _IO(ETRAXGPIO_IOCTYPE, IO_READBITS), NULL);
+ Remember that you need to setup the port directions appropriately in
+ the General configuration.
+
+config ETRAX_PA_BUTTON_BITMASK
+ hex "PA-buttons bitmask"
+ depends on ETRAX_GPIO
+ default "02"
+ help
+ This is a bitmask with information about what bits on PA that
+ are used for buttons.
+ Most products has a so called TEST button on PA1, if that's true
+ use 02 here.
+ Use 00 if there are no buttons on PA.
+ If the bitmask is <> 00 a button driver will be included in the gpio
+ driver. ETRAX general I/O support must be enabled.
+
+config ETRAX_PA_CHANGEABLE_DIR
+ hex "PA user changeable dir mask"
+ depends on ETRAX_GPIO
+ default "00"
+ help
+ This is a bitmask with information of what bits in PA that a user
+ can change direction on using ioctl's.
+ Bit set = changeable.
+ You probably want 00 here.
+
+config ETRAX_PA_CHANGEABLE_BITS
+ hex "PA user changeable bits mask"
+ depends on ETRAX_GPIO
+ default "FF"
+ help
+ This is a bitmask with information of what bits in PA that a user
+ can change change the value on using ioctl's.
+ Bit set = changeable.
+ You probably want 00 here.
+
+config ETRAX_PB_CHANGEABLE_DIR
+ hex "PB user changeable dir mask"
+ depends on ETRAX_GPIO
+ default "00"
+ help
+ This is a bitmask with information of what bits in PB that a user
+ can change direction on using ioctl's.
+ Bit set = changeable.
+ You probably want 00 here.
+
+config ETRAX_PB_CHANGEABLE_BITS
+ hex "PB user changeable bits mask"
+ depends on ETRAX_GPIO
+ default "FF"
+ help
+ This is a bitmask with information of what bits in PB that a user
+ can change the value on using ioctl's.
+ Bit set = changeable.
+ You probably want 00 here.
+
+config ETRAX_RTC
+ bool "Real Time Clock support"
+ depends on ETRAX_ARCH_V10
+ help
+ Enables drivers for the Real-Time Clock battery-backed chips on
+ some products. The kernel reads the time when booting, and
+ the date can be set using ioctl(fd, RTC_SET_TIME, &rt) with rt a
+ rtc_time struct (see <file:include/asm-cris/rtc.h>) on the /dev/rtc
+ device, major 121. You can check the time with cat /proc/rtc, but
+ normal time reading should be done using libc function time and
+ friends.
+
+choice
+ prompt "RTC chip"
+ depends on ETRAX_RTC
+ default ETRAX_DS1302
+
+config ETRAX_DS1302
+ bool "DS1302"
+ help
+ Enables the driver for the DS1302 Real-Time Clock battery-backed
+ chip on some products.
+
+config ETRAX_PCF8563
+ bool "PCF8563"
+ help
+ Enables the driver for the PCF8563 Real-Time Clock battery-backed
+ chip on some products.
+
+endchoice
+
+config ETRAX_DS1302_RST_ON_GENERIC_PORT
+ bool "DS1302 RST on Generic Port"
+ depends on ETRAX_DS1302
+ help
+ If your product has the RST signal line for the DS1302 RTC on the
+ Generic Port then say Y here, otherwise leave it as N in which
+ case the RST signal line is assumed to be connected to Port PB
+ (just like the SCL and SDA lines).
+
+config ETRAX_DS1302_RSTBIT
+ int "DS1302 RST bit number"
+ depends on ETRAX_DS1302
+ default "2"
+ help
+ This is the bit number for the RST signal line of the DS1302 RTC on
+ the selected port. If you have selected the generic port then it
+ should be bit 27, otherwise your best bet is bit 5.
+
+config ETRAX_DS1302_SCLBIT
+ int "DS1302 SCL bit number"
+ depends on ETRAX_DS1302
+ default "1"
+ help
+ This is the bit number for the SCL signal line of the DS1302 RTC on
+ Port PB. This is probably best left at 3.
+
+config ETRAX_DS1302_SDABIT
+ int "DS1302 SDA bit number"
+ depends on ETRAX_DS1302
+ default "0"
+ help
+ This is the bit number for the SDA signal line of the DS1302 RTC on
+ Port PB. This is probably best left at 2.
+
+config ETRAX_DS1302_TRICKLE_CHARGE
+ int "DS1302 Trickle charger value"
+ depends on ETRAX_DS1302
+ default "0"
+ help
+ This controls the initial value of the trickle charge register.
+ 0 = disabled (use this if you are unsure or have a non rechargable battery)
+ Otherwise the following values can be OR:ed together to control the
+ charge current:
+ 1 = 2kohm, 2 = 4kohm, 3 = 4kohm
+ 4 = 1 diode, 8 = 2 diodes
+ Allowed values are (increasing current): 0, 11, 10, 9, 7, 6, 5
+
+
diff --git a/arch/cris/arch-v10/drivers/Makefile b/arch/cris/arch-v10/drivers/Makefile
new file mode 100644
index 00000000000..20258e36f38
--- /dev/null
+++ b/arch/cris/arch-v10/drivers/Makefile
@@ -0,0 +1,12 @@
+#
+# Makefile for Etrax-specific drivers
+#
+
+obj-$(CONFIG_ETRAX_AXISFLASHMAP) += axisflashmap.o
+obj-$(CONFIG_ETRAX_I2C) += i2c.o
+obj-$(CONFIG_ETRAX_I2C_EEPROM) += eeprom.o
+obj-$(CONFIG_ETRAX_GPIO) += gpio.o
+obj-$(CONFIG_ETRAX_DS1302) += ds1302.o
+obj-$(CONFIG_ETRAX_PCF8563) += pcf8563.o
+
+
diff --git a/arch/cris/arch-v10/drivers/axisflashmap.c b/arch/cris/arch-v10/drivers/axisflashmap.c
new file mode 100644
index 00000000000..fb7d4855ea6
--- /dev/null
+++ b/arch/cris/arch-v10/drivers/axisflashmap.c
@@ -0,0 +1,541 @@
+/*
+ * Physical mapping layer for MTD using the Axis partitiontable format
+ *
+ * Copyright (c) 2001, 2002 Axis Communications AB
+ *
+ * This file is under the GPL.
+ *
+ * First partition is always sector 0 regardless of if we find a partitiontable
+ * or not. In the start of the next sector, there can be a partitiontable that
+ * tells us what other partitions to define. If there isn't, we use a default
+ * partition split defined below.
+ *
+ * $Log: axisflashmap.c,v $
+ * Revision 1.10 2004/08/16 12:37:22 starvik
+ * Merge of Linux 2.6.8
+ *
+ * Revision 1.8 2004/05/14 07:58:03 starvik
+ * Merge of changes from 2.4
+ *
+ * Revision 1.6 2003/07/04 08:27:37 starvik
+ * Merge of Linux 2.5.74
+ *
+ * Revision 1.5 2002/12/11 13:13:57 starvik
+ * Added arch/ to v10 specific includes
+ * Added fix from Linux 2.4 in serial.c (flush_to_flip_buffer)
+ *
+ * Revision 1.4 2002/11/20 11:56:10 starvik
+ * Merge of Linux 2.5.48
+ *
+ * Revision 1.3 2002/11/13 14:54:13 starvik
+ * Copied from linux 2.4
+ *
+ * Revision 1.28 2002/10/01 08:08:43 jonashg
+ * The first partition ends at the start of the partition table.
+ *
+ * Revision 1.27 2002/08/21 09:23:13 jonashg
+ * Speling.
+ *
+ * Revision 1.26 2002/08/21 08:35:20 jonashg
+ * Cosmetic change to printouts.
+ *
+ * Revision 1.25 2002/08/21 08:15:42 jonashg
+ * Made it compile even without CONFIG_MTD_CONCAT defined.
+ *
+ * Revision 1.24 2002/08/20 13:12:35 jonashg
+ * * New approach to probing. Probe cse0 and cse1 separately and (mtd)concat
+ * the results.
+ * * Removed compile time tests concerning how the mtdram driver has been
+ * configured. The user will know about the misconfiguration at runtime
+ * instead. (The old approach made it impossible to use mtdram for anything
+ * else than RAM boot).
+ *
+ * Revision 1.23 2002/05/13 12:12:28 johana
+ * Allow compile without CONFIG_MTD_MTDRAM but warn at compiletime and
+ * be informative at runtime.
+ *
+ * Revision 1.22 2002/05/13 10:24:44 johana
+ * Added #if checks on MTDRAM CONFIG
+ *
+ * Revision 1.21 2002/05/06 16:05:20 johana
+ * Removed debug printout.
+ *
+ * Revision 1.20 2002/05/06 16:03:00 johana
+ * No more cramfs as root hack in generic code.
+ * It's handled by axisflashmap using mtdram.
+ *
+ * Revision 1.19 2002/03/15 17:10:28 bjornw
+ * Changed comment about cached access since we changed this before
+ *
+ * Revision 1.18 2002/03/05 17:06:15 jonashg
+ * Try amd_flash probe before cfi_probe since amd_flash driver can handle two
+ * (or more) flash chips of different model and the cfi driver cannot.
+ *
+ * Revision 1.17 2001/11/12 19:42:38 pkj
+ * Fixed compiler warnings.
+ *
+ * Revision 1.16 2001/11/08 11:18:58 jonashg
+ * Always read from uncached address to avoid problems with flushing
+ * cachelines after write and MTD-erase. No performance loss have been
+ * seen yet.
+ *
+ * Revision 1.15 2001/10/19 12:41:04 jonashg
+ * Name of probe has changed in MTD.
+ *
+ * Revision 1.14 2001/09/21 07:14:10 jonashg
+ * Made root filesystem (cramfs) use mtdblock driver when booting from flash.
+ *
+ * Revision 1.13 2001/08/15 13:57:35 jonashg
+ * Entire MTD updated to the linux 2.4.7 version.
+ *
+ * Revision 1.12 2001/06/11 09:50:30 jonashg
+ * Oops, 2MB is 0x200000 bytes.
+ *
+ * Revision 1.11 2001/06/08 11:39:44 jonashg
+ * Changed sizes and offsets in axis_default_partitions to use
+ * CONFIG_ETRAX_PTABLE_SECTOR.
+ *
+ * Revision 1.10 2001/05/29 09:42:03 jonashg
+ * Use macro for end marker length instead of sizeof.
+ *
+ * Revision 1.9 2001/05/29 08:52:52 jonashg
+ * Gave names to the magic fours (size of the ptable end marker).
+ *
+ * Revision 1.8 2001/05/28 15:36:20 jonashg
+ * * Removed old comment about ptable location in flash (it's a CONFIG_ option).
+ * * Variable ptable was initialized twice to the same value.
+ *
+ * Revision 1.7 2001/04/05 13:41:46 markusl
+ * Updated according to review remarks
+ *
+ * Revision 1.6 2001/03/07 09:21:21 bjornw
+ * No need to waste .data
+ *
+ * Revision 1.5 2001/03/06 16:27:01 jonashg
+ * Probe the entire flash area for flash devices.
+ *
+ * Revision 1.4 2001/02/23 12:47:15 bjornw
+ * Uncached flash in LOW_MAP moved from 0xe to 0x8
+ *
+ * Revision 1.3 2001/02/16 12:11:45 jonashg
+ * MTD driver amd_flash is now included in MTD CVS repository.
+ * (It's now in drivers/mtd).
+ *
+ * Revision 1.2 2001/02/09 11:12:22 jonashg
+ * Support for AMD compatible non-CFI flash chips.
+ * Only tested with Toshiba TC58FVT160 so far.
+ *
+ * Revision 1.1 2001/01/12 17:01:18 bjornw
+ * * Added axisflashmap.c, a physical mapping for MTD that reads and understands
+ * Axis partition-table format.
+ *
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/config.h>
+#include <linux/init.h>
+
+#include <linux/mtd/concat.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/mtdram.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/axisflashmap.h>
+#include <asm/mmu.h>
+#include <asm/arch/sv_addr_ag.h>
+
+#ifdef CONFIG_CRIS_LOW_MAP
+#define FLASH_UNCACHED_ADDR KSEG_8
+#define FLASH_CACHED_ADDR KSEG_5
+#else
+#define FLASH_UNCACHED_ADDR KSEG_E
+#define FLASH_CACHED_ADDR KSEG_F
+#endif
+
+#if CONFIG_ETRAX_FLASH_BUSWIDTH==1
+#define flash_data __u8
+#elif CONFIG_ETRAX_FLASH_BUSWIDTH==2
+#define flash_data __u16
+#elif CONFIG_ETRAX_FLASH_BUSWIDTH==4
+#define flash_data __u16
+#endif
+
+/* From head.S */
+extern unsigned long romfs_start, romfs_length, romfs_in_flash;
+
+/* The master mtd for the entire flash. */
+struct mtd_info* axisflash_mtd = NULL;
+
+/* Map driver functions. */
+
+static map_word flash_read(struct map_info *map, unsigned long ofs)
+{
+ map_word tmp;
+ tmp.x[0] = *(flash_data *)(map->map_priv_1 + ofs);
+ return tmp;
+}
+
+static void flash_copy_from(struct map_info *map, void *to,
+ unsigned long from, ssize_t len)
+{
+ memcpy(to, (void *)(map->map_priv_1 + from), len);
+}
+
+static void flash_write(struct map_info *map, map_word d, unsigned long adr)
+{
+ *(flash_data *)(map->map_priv_1 + adr) = (flash_data)d.x[0];
+}
+
+/*
+ * The map for chip select e0.
+ *
+ * We run into tricky coherence situations if we mix cached with uncached
+ * accesses to we only use the uncached version here.
+ *
+ * The size field is the total size where the flash chips may be mapped on the
+ * chip select. MTD probes should find all devices there and it does not matter
+ * if there are unmapped gaps or aliases (mirrors of flash devices). The MTD
+ * probes will ignore them.
+ *
+ * The start address in map_priv_1 is in virtual memory so we cannot use
+ * MEM_CSE0_START but must rely on that FLASH_UNCACHED_ADDR is the start
+ * address of cse0.
+ */
+static struct map_info map_cse0 = {
+ .name = "cse0",
+ .size = MEM_CSE0_SIZE,
+ .bankwidth = CONFIG_ETRAX_FLASH_BUSWIDTH,
+ .read = flash_read,
+ .copy_from = flash_copy_from,
+ .write = flash_write,
+ .map_priv_1 = FLASH_UNCACHED_ADDR
+};
+
+/*
+ * The map for chip select e1.
+ *
+ * If there was a gap between cse0 and cse1, map_priv_1 would get the wrong
+ * address, but there isn't.
+ */
+static struct map_info map_cse1 = {
+ .name = "cse1",
+ .size = MEM_CSE1_SIZE,
+ .bankwidth = CONFIG_ETRAX_FLASH_BUSWIDTH,
+ .read = flash_read,
+ .copy_from = flash_copy_from,
+ .write = flash_write,
+ .map_priv_1 = FLASH_UNCACHED_ADDR + MEM_CSE0_SIZE
+};
+
+/* If no partition-table was found, we use this default-set. */
+#define MAX_PARTITIONS 7
+#define NUM_DEFAULT_PARTITIONS 3
+
+/*
+ * Default flash size is 2MB. CONFIG_ETRAX_PTABLE_SECTOR is most likely the
+ * size of one flash block and "filesystem"-partition needs 5 blocks to be able
+ * to use JFFS.
+ */
+static struct mtd_partition axis_default_partitions[NUM_DEFAULT_PARTITIONS] = {
+ {
+ .name = "boot firmware",
+ .size = CONFIG_ETRAX_PTABLE_SECTOR,
+ .offset = 0
+ },
+ {
+ .name = "kernel",
+ .size = 0x200000 - (6 * CONFIG_ETRAX_PTABLE_SECTOR),
+ .offset = CONFIG_ETRAX_PTABLE_SECTOR
+ },
+ {
+ .name = "filesystem",
+ .size = 5 * CONFIG_ETRAX_PTABLE_SECTOR,
+ .offset = 0x200000 - (5 * CONFIG_ETRAX_PTABLE_SECTOR)
+ }
+};
+
+/* Initialize the ones normally used. */
+static struct mtd_partition axis_partitions[MAX_PARTITIONS] = {
+ {
+ .name = "part0",
+ .size = CONFIG_ETRAX_PTABLE_SECTOR,
+ .offset = 0
+ },
+ {
+ .name = "part1",
+ .size = 0,
+ .offset = 0
+ },
+ {
+ .name = "part2",
+ .size = 0,
+ .offset = 0
+ },
+ {
+ .name = "part3",
+ .size = 0,
+ .offset = 0
+ },
+ {
+ .name = "part4",
+ .size = 0,
+ .offset = 0
+ },
+ {
+ .name = "part5",
+ .size = 0,
+ .offset = 0
+ },
+ {
+ .name = "part6",
+ .size = 0,
+ .offset = 0
+ },
+};
+
+/*
+ * Probe a chip select for AMD-compatible (JEDEC) or CFI-compatible flash
+ * chips in that order (because the amd_flash-driver is faster).
+ */
+static struct mtd_info *probe_cs(struct map_info *map_cs)
+{
+ struct mtd_info *mtd_cs = NULL;
+
+ printk(KERN_INFO
+ "%s: Probing a 0x%08lx bytes large window at 0x%08lx.\n",
+ map_cs->name, map_cs->size, map_cs->map_priv_1);
+
+#ifdef CONFIG_MTD_AMDSTD
+ mtd_cs = do_map_probe("amd_flash", map_cs);
+#endif
+#ifdef CONFIG_MTD_CFI
+ if (!mtd_cs) {
+ mtd_cs = do_map_probe("cfi_probe", map_cs);
+ }
+#endif
+
+ return mtd_cs;
+}
+
+/*
+ * Probe each chip select individually for flash chips. If there are chips on
+ * both cse0 and cse1, the mtd_info structs will be concatenated to one struct
+ * so that MTD partitions can cross chip boundries.
+ *
+ * The only known restriction to how you can mount your chips is that each
+ * chip select must hold similar flash chips. But you need external hardware
+ * to do that anyway and you can put totally different chips on cse0 and cse1
+ * so it isn't really much of a restriction.
+ */
+static struct mtd_info *flash_probe(void)
+{
+ struct mtd_info *mtd_cse0;
+ struct mtd_info *mtd_cse1;
+ struct mtd_info *mtd_cse;
+
+ mtd_cse0 = probe_cs(&map_cse0);
+ mtd_cse1 = probe_cs(&map_cse1);
+
+ if (!mtd_cse0 && !mtd_cse1) {
+ /* No chip found. */
+ return NULL;
+ }
+
+ if (mtd_cse0 && mtd_cse1) {
+#ifdef CONFIG_MTD_CONCAT
+ struct mtd_info *mtds[] = { mtd_cse0, mtd_cse1 };
+
+ /* Since the concatenation layer adds a small overhead we
+ * could try to figure out if the chips in cse0 and cse1 are
+ * identical and reprobe the whole cse0+cse1 window. But since
+ * flash chips are slow, the overhead is relatively small.
+ * So we use the MTD concatenation layer instead of further
+ * complicating the probing procedure.
+ */
+ mtd_cse = mtd_concat_create(mtds,
+ sizeof(mtds) / sizeof(mtds[0]),
+ "cse0+cse1");
+#else
+ printk(KERN_ERR "%s and %s: Cannot concatenate due to kernel "
+ "(mis)configuration!\n", map_cse0.name, map_cse1.name);
+ mtd_cse = NULL;
+#endif
+ if (!mtd_cse) {
+ printk(KERN_ERR "%s and %s: Concatenation failed!\n",
+ map_cse0.name, map_cse1.name);
+
+ /* The best we can do now is to only use what we found
+ * at cse0.
+ */
+ mtd_cse = mtd_cse0;
+ map_destroy(mtd_cse1);
+ }
+ } else {
+ mtd_cse = mtd_cse0? mtd_cse0 : mtd_cse1;
+ }
+
+ return mtd_cse;
+}
+
+/*
+ * Probe the flash chip(s) and, if it succeeds, read the partition-table
+ * and register the partitions with MTD.
+ */
+static int __init init_axis_flash(void)
+{
+ struct mtd_info *mymtd;
+ int err = 0;
+ int pidx = 0;
+ struct partitiontable_head *ptable_head = NULL;
+ struct partitiontable_entry *ptable;
+ int use_default_ptable = 1; /* Until proven otherwise. */
+ const char *pmsg = " /dev/flash%d at 0x%08x, size 0x%08x\n";
+
+ if (!(mymtd = flash_probe())) {
+ /* There's no reason to use this module if no flash chip can
+ * be identified. Make sure that's understood.
+ */
+ printk(KERN_INFO "axisflashmap: Found no flash chip.\n");
+ } else {
+ printk(KERN_INFO "%s: 0x%08x bytes of flash memory.\n",
+ mymtd->name, mymtd->size);
+ axisflash_mtd = mymtd;
+ }
+
+ if (mymtd) {
+ mymtd->owner = THIS_MODULE;
+ ptable_head = (struct partitiontable_head *)(FLASH_CACHED_ADDR +
+ CONFIG_ETRAX_PTABLE_SECTOR +
+ PARTITION_TABLE_OFFSET);
+ }
+ pidx++; /* First partition is always set to the default. */
+
+ if (ptable_head && (ptable_head->magic == PARTITION_TABLE_MAGIC)
+ && (ptable_head->size <
+ (MAX_PARTITIONS * sizeof(struct partitiontable_entry) +
+ PARTITIONTABLE_END_MARKER_SIZE))
+ && (*(unsigned long*)((void*)ptable_head + sizeof(*ptable_head) +
+ ptable_head->size -
+ PARTITIONTABLE_END_MARKER_SIZE)
+ == PARTITIONTABLE_END_MARKER)) {
+ /* Looks like a start, sane length and end of a
+ * partition table, lets check csum etc.
+ */
+ int ptable_ok = 0;
+ struct partitiontable_entry *max_addr =
+ (struct partitiontable_entry *)
+ ((unsigned long)ptable_head + sizeof(*ptable_head) +
+ ptable_head->size);
+ unsigned long offset = CONFIG_ETRAX_PTABLE_SECTOR;
+ unsigned char *p;
+ unsigned long csum = 0;
+
+ ptable = (struct partitiontable_entry *)
+ ((unsigned long)ptable_head + sizeof(*ptable_head));
+
+ /* Lets be PARANOID, and check the checksum. */
+ p = (unsigned char*) ptable;
+
+ while (p <= (unsigned char*)max_addr) {
+ csum += *p++;
+ csum += *p++;
+ csum += *p++;
+ csum += *p++;
+ }
+ ptable_ok = (csum == ptable_head->checksum);
+
+ /* Read the entries and use/show the info. */
+ printk(KERN_INFO " Found a%s partition table at 0x%p-0x%p.\n",
+ (ptable_ok ? " valid" : "n invalid"), ptable_head,
+ max_addr);
+
+ /* We have found a working bootblock. Now read the
+ * partition table. Scan the table. It ends when
+ * there is 0xffffffff, that is, empty flash.
+ */
+ while (ptable_ok
+ && ptable->offset != 0xffffffff
+ && ptable < max_addr
+ && pidx < MAX_PARTITIONS) {
+
+ axis_partitions[pidx].offset = offset + ptable->offset;
+ axis_partitions[pidx].size = ptable->size;
+
+ printk(pmsg, pidx, axis_partitions[pidx].offset,
+ axis_partitions[pidx].size);
+ pidx++;
+ ptable++;
+ }
+ use_default_ptable = !ptable_ok;
+ }
+
+ if (romfs_in_flash) {
+ /* Add an overlapping device for the root partition (romfs). */
+
+ axis_partitions[pidx].name = "romfs";
+ axis_partitions[pidx].size = romfs_length;
+ axis_partitions[pidx].offset = romfs_start - FLASH_CACHED_ADDR;
+ axis_partitions[pidx].mask_flags |= MTD_WRITEABLE;
+
+ printk(KERN_INFO
+ " Adding readonly flash partition for romfs image:\n");
+ printk(pmsg, pidx, axis_partitions[pidx].offset,
+ axis_partitions[pidx].size);
+ pidx++;
+ }
+
+ if (mymtd) {
+ if (use_default_ptable) {
+ printk(KERN_INFO " Using default partition table.\n");
+ err = add_mtd_partitions(mymtd, axis_default_partitions,
+ NUM_DEFAULT_PARTITIONS);
+ } else {
+ err = add_mtd_partitions(mymtd, axis_partitions, pidx);
+ }
+
+ if (err) {
+ panic("axisflashmap could not add MTD partitions!\n");
+ }
+ }
+
+ if (!romfs_in_flash) {
+ /* Create an RAM device for the root partition (romfs). */
+
+#if !defined(CONFIG_MTD_MTDRAM) || (CONFIG_MTDRAM_TOTAL_SIZE != 0) || (CONFIG_MTDRAM_ABS_POS != 0)
+ /* No use trying to boot this kernel from RAM. Panic! */
+ printk(KERN_EMERG "axisflashmap: Cannot create an MTD RAM "
+ "device due to kernel (mis)configuration!\n");
+ panic("This kernel cannot boot from RAM!\n");
+#else
+ struct mtd_info *mtd_ram;
+
+ mtd_ram = (struct mtd_info *)kmalloc(sizeof(struct mtd_info),
+ GFP_KERNEL);
+ if (!mtd_ram) {
+ panic("axisflashmap couldn't allocate memory for "
+ "mtd_info!\n");
+ }
+
+ printk(KERN_INFO " Adding RAM partition for romfs image:\n");
+ printk(pmsg, pidx, romfs_start, romfs_length);
+
+ err = mtdram_init_device(mtd_ram, (void*)romfs_start,
+ romfs_length, "romfs");
+ if (err) {
+ panic("axisflashmap could not initialize MTD RAM "
+ "device!\n");
+ }
+#endif
+ }
+
+ return err;
+}
+
+/* This adds the above to the kernels init-call chain. */
+module_init(init_axis_flash);
+
+EXPORT_SYMBOL(axisflash_mtd);
diff --git a/arch/cris/arch-v10/drivers/ds1302.c b/arch/cris/arch-v10/drivers/ds1302.c
new file mode 100644
index 00000000000..fba530fcfae
--- /dev/null
+++ b/arch/cris/arch-v10/drivers/ds1302.c
@@ -0,0 +1,602 @@
+/*!***************************************************************************
+*!
+*! FILE NAME : ds1302.c
+*!
+*! DESCRIPTION: Implements an interface for the DS1302 RTC through Etrax I/O
+*!
+*! Functions exported: ds1302_readreg, ds1302_writereg, ds1302_init
+*!
+*! $Log: ds1302.c,v $
+*! Revision 1.14 2004/08/24 06:48:43 starvik
+*! Whitespace cleanup
+*!
+*! Revision 1.13 2004/05/28 09:26:59 starvik
+*! Modified I2C initialization to work in 2.6.
+*!
+*! Revision 1.12 2004/05/14 07:58:03 starvik
+*! Merge of changes from 2.4
+*!
+*! Revision 1.10 2004/02/04 09:25:12 starvik
+*! Merge of Linux 2.6.2
+*!
+*! Revision 1.9 2003/07/04 08:27:37 starvik
+*! Merge of Linux 2.5.74
+*!
+*! Revision 1.8 2003/04/09 05:20:47 starvik
+*! Merge of Linux 2.5.67
+*!
+*! Revision 1.6 2003/01/09 14:42:51 starvik
+*! Merge of Linux 2.5.55
+*!
+*! Revision 1.4 2002/12/11 13:13:57 starvik
+*! Added arch/ to v10 specific includes
+*! Added fix from Linux 2.4 in serial.c (flush_to_flip_buffer)
+*!
+*! Revision 1.3 2002/11/20 11:56:10 starvik
+*! Merge of Linux 2.5.48
+*!
+*! Revision 1.2 2002/11/18 13:16:06 starvik
+*! Linux 2.5 port of latest 2.4 drivers
+*!
+*! Revision 1.15 2002/10/11 16:14:33 johana
+*! Added CONFIG_ETRAX_DS1302_TRICKLE_CHARGE and initial setting of the
+*! trcklecharge register.
+*!
+*! Revision 1.14 2002/10/10 12:15:38 magnusmn
+*! Added support for having the RST signal on bit g0
+*!
+*! Revision 1.13 2002/05/29 15:16:08 johana
+*! Removed unused variables.
+*!
+*! Revision 1.12 2002/04/10 15:35:25 johana
+*! Moved probe function closer to init function and marked it __init.
+*!
+*! Revision 1.11 2001/06/14 12:35:52 jonashg
+*! The ATA hack is back. It is unfortunately the only way to set g27 to output.
+*!
+*! Revision 1.9 2001/06/14 10:00:14 jonashg
+*! No need for tempudelay to be inline anymore (had to adjust the usec to
+*! loops conversion because of this to make it slow enough to be a udelay).
+*!
+*! Revision 1.8 2001/06/14 08:06:32 jonashg
+*! Made tempudelay delay usecs (well, just a tad more).
+*!
+*! Revision 1.7 2001/06/13 14:18:11 jonashg
+*! Only allow processes with SYS_TIME capability to set time and charge.
+*!
+*! Revision 1.6 2001/06/12 15:22:07 jonashg
+*! * Made init function __init.
+*! * Parameter to out_byte() is unsigned char.
+*! * The magic number 42 has got a name.
+*! * Removed comment about /proc (nothing is exported there).
+*!
+*! Revision 1.5 2001/06/12 14:35:13 jonashg
+*! Gave the module a name and added it to printk's.
+*!
+*! Revision 1.4 2001/05/31 14:53:40 jonashg
+*! Made tempudelay() inline so that the watchdog doesn't reset (see
+*! function comment).
+*!
+*! Revision 1.3 2001/03/26 16:03:06 bjornw
+*! Needs linux/config.h
+*!
+*! Revision 1.2 2001/03/20 19:42:00 bjornw
+*! Use the ETRAX prefix on the DS1302 options
+*!
+*! Revision 1.1 2001/03/20 09:13:50 magnusmn
+*! Linux 2.4 port
+*!
+*! Revision 1.10 2000/07/05 15:38:23 bjornw
+*! Dont update kernel time when a RTC_SET_TIME is done
+*!
+*! Revision 1.9 2000/03/02 15:42:59 macce
+*! * Hack to make RTC work on all 2100/2400
+*!
+*! Revision 1.8 2000/02/23 16:59:18 torbjore
+*! added setup of R_GEN_CONFIG when RTC is connected to the generic port.
+*!
+*! Revision 1.7 2000/01/17 15:51:43 johana
+*! Added RTC_SET_CHARGE ioctl to enable trickle charger.
+*!
+*! Revision 1.6 1999/10/27 13:19:47 bjornw
+*! Added update_xtime_from_cmos which reads back the updated RTC into the kernel.
+*! /dev/rtc calls it now.
+*!
+*! Revision 1.5 1999/10/27 12:39:37 bjornw
+*! Disabled superuser check. Anyone can now set the time.
+*!
+*! Revision 1.4 1999/09/02 13:27:46 pkj
+*! Added shadow for R_PORT_PB_CONFIG.
+*! Renamed port_g_shadow to port_g_data_shadow.
+*!
+*! Revision 1.3 1999/09/02 08:28:06 pkj
+*! Made it possible to select either port PB or the generic port for the RST
+*! signal line to the DS1302 RTC.
+*! Also make sure the RST bit is configured as output on Port PB (if used).
+*!
+*! Revision 1.2 1999/09/01 14:47:20 bjornw
+*! Added support for /dev/rtc operations with ioctl RD_TIME and SET_TIME to read
+*! and set the date. Register as major 121.
+*!
+*! Revision 1.1 1999/09/01 09:45:29 bjornw
+*! Implemented a DS1302 RTC driver.
+*!
+*!
+*! ---------------------------------------------------------------------------
+*!
+*! (C) Copyright 1999, 2000, 2001 Axis Communications AB, LUND, SWEDEN
+*!
+*! $Id: ds1302.c,v 1.14 2004/08/24 06:48:43 starvik Exp $
+*!
+*!***************************************************************************/
+
+#include <linux/config.h>
+
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/miscdevice.h>
+#include <linux/delay.h>
+#include <linux/bcd.h>
+
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <asm/arch/svinto.h>
+#include <asm/io.h>
+#include <asm/rtc.h>
+
+#define RTC_MAJOR_NR 121 /* local major, change later */
+
+static const char ds1302_name[] = "ds1302";
+
+/* The DS1302 might be connected to different bits on different products.
+ * It has three signals - SDA, SCL and RST. RST and SCL are always outputs,
+ * but SDA can have a selected direction.
+ * For now, only PORT_PB is hardcoded.
+ */
+
+/* The RST bit may be on either the Generic Port or Port PB. */
+#ifdef CONFIG_ETRAX_DS1302_RST_ON_GENERIC_PORT
+#define TK_RST_OUT(x) REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow, CONFIG_ETRAX_DS1302_RSTBIT, x)
+#define TK_RST_DIR(x)
+#else
+#define TK_RST_OUT(x) REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, CONFIG_ETRAX_DS1302_RSTBIT, x)
+#define TK_RST_DIR(x) REG_SHADOW_SET(R_PORT_PB_DIR, port_pb_dir_shadow, CONFIG_ETRAX_DS1302_RSTBIT, x)
+#endif
+
+
+#define TK_SDA_OUT(x) REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, CONFIG_ETRAX_DS1302_SDABIT, x)
+#define TK_SCL_OUT(x) REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, CONFIG_ETRAX_DS1302_SCLBIT, x)
+
+#define TK_SDA_IN() ((*R_PORT_PB_READ >> CONFIG_ETRAX_DS1302_SDABIT) & 1)
+/* 1 is out, 0 is in */
+#define TK_SDA_DIR(x) REG_SHADOW_SET(R_PORT_PB_DIR, port_pb_dir_shadow, CONFIG_ETRAX_DS1302_SDABIT, x)
+#define TK_SCL_DIR(x) REG_SHADOW_SET(R_PORT_PB_DIR, port_pb_dir_shadow, CONFIG_ETRAX_DS1302_SCLBIT, x)
+
+
+/*
+ * The reason for tempudelay and not udelay is that loops_per_usec
+ * (used in udelay) is not set when functions here are called from time.c
+ */
+
+static void tempudelay(int usecs)
+{
+ volatile int loops;
+
+ for(loops = usecs * 12; loops > 0; loops--)
+ /* nothing */;
+}
+
+
+/* Send 8 bits. */
+static void
+out_byte(unsigned char x)
+{
+ int i;
+ TK_SDA_DIR(1);
+ for (i = 8; i--;) {
+ /* The chip latches incoming bits on the rising edge of SCL. */
+ TK_SCL_OUT(0);
+ TK_SDA_OUT(x & 1);
+ tempudelay(1);
+ TK_SCL_OUT(1);
+ tempudelay(1);
+ x >>= 1;
+ }
+ TK_SDA_DIR(0);
+}
+
+static unsigned char
+in_byte(void)
+{
+ unsigned char x = 0;
+ int i;
+
+ /* Read byte. Bits come LSB first, on the falling edge of SCL.
+ * Assume SDA is in input direction already.
+ */
+ TK_SDA_DIR(0);
+
+ for (i = 8; i--;) {
+ TK_SCL_OUT(0);
+ tempudelay(1);
+ x >>= 1;
+ x |= (TK_SDA_IN() << 7);
+ TK_SCL_OUT(1);
+ tempudelay(1);
+ }
+
+ return x;
+}
+
+/* Prepares for a transaction by de-activating RST (active-low). */
+
+static void
+start(void)
+{
+ TK_SCL_OUT(0);
+ tempudelay(1);
+ TK_RST_OUT(0);
+ tempudelay(5);
+ TK_RST_OUT(1);
+}
+
+/* Ends a transaction by taking RST active again. */
+
+static void
+stop(void)
+{
+ tempudelay(2);
+ TK_RST_OUT(0);
+}
+
+/* Enable writing. */
+
+static void
+ds1302_wenable(void)
+{
+ start();
+ out_byte(0x8e); /* Write control register */
+ out_byte(0x00); /* Disable write protect bit 7 = 0 */
+ stop();
+}
+
+/* Disable writing. */
+
+static void
+ds1302_wdisable(void)
+{
+ start();
+ out_byte(0x8e); /* Write control register */
+ out_byte(0x80); /* Disable write protect bit 7 = 0 */
+ stop();
+}
+
+
+
+/* Read a byte from the selected register in the DS1302. */
+
+unsigned char
+ds1302_readreg(int reg)
+{
+ unsigned char x;
+
+ start();
+ out_byte(0x81 | (reg << 1)); /* read register */
+ x = in_byte();
+ stop();
+
+ return x;
+}
+
+/* Write a byte to the selected register. */
+
+void
+ds1302_writereg(int reg, unsigned char val)
+{
+#ifndef CONFIG_ETRAX_RTC_READONLY
+ int do_writereg = 1;
+#else
+ int do_writereg = 0;
+
+ if (reg == RTC_TRICKLECHARGER)
+ do_writereg = 1;
+#endif
+
+ if (do_writereg) {
+ ds1302_wenable();
+ start();
+ out_byte(0x80 | (reg << 1)); /* write register */
+ out_byte(val);
+ stop();
+ ds1302_wdisable();
+ }
+}
+
+void
+get_rtc_time(struct rtc_time *rtc_tm)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ local_irq_disable();
+
+ rtc_tm->tm_sec = CMOS_READ(RTC_SECONDS);
+ rtc_tm->tm_min = CMOS_READ(RTC_MINUTES);
+ rtc_tm->tm_hour = CMOS_READ(RTC_HOURS);
+ rtc_tm->tm_mday = CMOS_READ(RTC_DAY_OF_MONTH);
+ rtc_tm->tm_mon = CMOS_READ(RTC_MONTH);
+ rtc_tm->tm_year = CMOS_READ(RTC_YEAR);
+
+ local_irq_restore(flags);
+
+ BCD_TO_BIN(rtc_tm->tm_sec);
+ BCD_TO_BIN(rtc_tm->tm_min);
+ BCD_TO_BIN(rtc_tm->tm_hour);
+ BCD_TO_BIN(rtc_tm->tm_mday);
+ BCD_TO_BIN(rtc_tm->tm_mon);
+ BCD_TO_BIN(rtc_tm->tm_year);
+
+ /*
+ * Account for differences between how the RTC uses the values
+ * and how they are defined in a struct rtc_time;
+ */
+
+ if (rtc_tm->tm_year <= 69)
+ rtc_tm->tm_year += 100;
+
+ rtc_tm->tm_mon--;
+}
+
+static unsigned char days_in_mo[] =
+ {0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31};
+
+/* ioctl that supports RTC_RD_TIME and RTC_SET_TIME (read and set time/date). */
+
+static int
+rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
+ unsigned long arg)
+{
+ unsigned long flags;
+
+ switch(cmd) {
+ case RTC_RD_TIME: /* read the time/date from RTC */
+ {
+ struct rtc_time rtc_tm;
+
+ memset(&rtc_tm, 0, sizeof (struct rtc_time));
+ get_rtc_time(&rtc_tm);
+ if (copy_to_user((struct rtc_time*)arg, &rtc_tm, sizeof(struct rtc_time)))
+ return -EFAULT;
+ return 0;
+ }
+
+ case RTC_SET_TIME: /* set the RTC */
+ {
+ struct rtc_time rtc_tm;
+ unsigned char mon, day, hrs, min, sec, leap_yr;
+ unsigned int yrs;
+
+ if (!capable(CAP_SYS_TIME))
+ return -EPERM;
+
+ if (copy_from_user(&rtc_tm, (struct rtc_time*)arg, sizeof(struct rtc_time)))
+ return -EFAULT;
+
+ yrs = rtc_tm.tm_year + 1900;
+ mon = rtc_tm.tm_mon + 1; /* tm_mon starts at zero */
+ day = rtc_tm.tm_mday;
+ hrs = rtc_tm.tm_hour;
+ min = rtc_tm.tm_min;
+ sec = rtc_tm.tm_sec;
+
+
+ if ((yrs < 1970) || (yrs > 2069))
+ return -EINVAL;
+
+ leap_yr = ((!(yrs % 4) && (yrs % 100)) || !(yrs % 400));
+
+ if ((mon > 12) || (day == 0))
+ return -EINVAL;
+
+ if (day > (days_in_mo[mon] + ((mon == 2) && leap_yr)))
+ return -EINVAL;
+
+ if ((hrs >= 24) || (min >= 60) || (sec >= 60))
+ return -EINVAL;
+
+ if (yrs >= 2000)
+ yrs -= 2000; /* RTC (0, 1, ... 69) */
+ else
+ yrs -= 1900; /* RTC (70, 71, ... 99) */
+
+ BIN_TO_BCD(sec);
+ BIN_TO_BCD(min);
+ BIN_TO_BCD(hrs);
+ BIN_TO_BCD(day);
+ BIN_TO_BCD(mon);
+ BIN_TO_BCD(yrs);
+
+ local_irq_save(flags);
+ local_irq_disable();
+ CMOS_WRITE(yrs, RTC_YEAR);
+ CMOS_WRITE(mon, RTC_MONTH);
+ CMOS_WRITE(day, RTC_DAY_OF_MONTH);
+ CMOS_WRITE(hrs, RTC_HOURS);
+ CMOS_WRITE(min, RTC_MINUTES);
+ CMOS_WRITE(sec, RTC_SECONDS);
+ local_irq_restore(flags);
+
+ /* Notice that at this point, the RTC is updated but
+ * the kernel is still running with the old time.
+ * You need to set that separately with settimeofday
+ * or adjtimex.
+ */
+ return 0;
+ }
+
+ case RTC_SET_CHARGE: /* set the RTC TRICKLE CHARGE register */
+ {
+ int tcs_val;
+
+ if (!capable(CAP_SYS_TIME))
+ return -EPERM;
+
+ if(copy_from_user(&tcs_val, (int*)arg, sizeof(int)))
+ return -EFAULT;
+
+ tcs_val = RTC_TCR_PATTERN | (tcs_val & 0x0F);
+ ds1302_writereg(RTC_TRICKLECHARGER, tcs_val);
+ return 0;
+ }
+ case RTC_VLOW_RD:
+ {
+ /* TODO:
+ * Implement voltage low detection support
+ */
+ printk(KERN_WARNING "DS1302: RTC Voltage Low detection"
+ " is not supported\n");
+ return 0;
+ }
+ case RTC_VLOW_SET:
+ {
+ /* TODO:
+ * Nothing to do since Voltage Low detection is not supported
+ */
+ return 0;
+ }
+ default:
+ return -ENOIOCTLCMD;
+ }
+}
+
+static void
+print_rtc_status(void)
+{
+ struct rtc_time tm;
+
+ get_rtc_time(&tm);
+
+ /*
+ * There is no way to tell if the luser has the RTC set for local
+ * time or for Universal Standard Time (GMT). Probably local though.
+ */
+
+ printk(KERN_INFO "rtc_time\t: %02d:%02d:%02d\n",
+ tm.tm_hour, tm.tm_min, tm.tm_sec);
+ printk(KERN_INFO "rtc_date\t: %04d-%02d-%02d\n",
+ tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday);
+}
+
+/* The various file operations we support. */
+
+static struct file_operations rtc_fops = {
+ .owner = THIS_MODULE,
+ .ioctl = rtc_ioctl,
+};
+
+/* Probe for the chip by writing something to its RAM and try reading it back. */
+
+#define MAGIC_PATTERN 0x42
+
+static int __init
+ds1302_probe(void)
+{
+ int retval, res;
+
+ TK_RST_DIR(1);
+ TK_SCL_DIR(1);
+ TK_SDA_DIR(0);
+
+ /* Try to talk to timekeeper. */
+
+ ds1302_wenable();
+ start();
+ out_byte(0xc0); /* write RAM byte 0 */
+ out_byte(MAGIC_PATTERN); /* write something magic */
+ start();
+ out_byte(0xc1); /* read RAM byte 0 */
+
+ if((res = in_byte()) == MAGIC_PATTERN) {
+ stop();
+ ds1302_wdisable();
+ printk(KERN_INFO "%s: RTC found.\n", ds1302_name);
+ printk(KERN_INFO "%s: SDA, SCL, RST on PB%i, PB%i, %s%i\n",
+ ds1302_name,
+ CONFIG_ETRAX_DS1302_SDABIT,
+ CONFIG_ETRAX_DS1302_SCLBIT,
+#ifdef CONFIG_ETRAX_DS1302_RST_ON_GENERIC_PORT
+ "GENIO",
+#else
+ "PB",
+#endif
+ CONFIG_ETRAX_DS1302_RSTBIT);
+ print_rtc_status();
+ retval = 1;
+ } else {
+ stop();
+ retval = 0;
+ }
+
+ return retval;
+}
+
+
+/* Just probe for the RTC and register the device to handle the ioctl needed. */
+
+int __init
+ds1302_init(void)
+{
+ i2c_init();
+
+ if (!ds1302_probe()) {
+#ifdef CONFIG_ETRAX_DS1302_RST_ON_GENERIC_PORT
+#if CONFIG_ETRAX_DS1302_RSTBIT == 27
+ /*
+ * The only way to set g27 to output is to enable ATA.
+ *
+ * Make sure that R_GEN_CONFIG is setup correct.
+ */
+ genconfig_shadow = ((genconfig_shadow &
+ ~IO_MASK(R_GEN_CONFIG, ata)) |
+ (IO_STATE(R_GEN_CONFIG, ata, select)));
+ *R_GEN_CONFIG = genconfig_shadow;
+#elif CONFIG_ETRAX_DS1302_RSTBIT == 0
+
+ /* Set the direction of this bit to out. */
+ genconfig_shadow = ((genconfig_shadow &
+ ~IO_MASK(R_GEN_CONFIG, g0dir)) |
+ (IO_STATE(R_GEN_CONFIG, g0dir, out)));
+ *R_GEN_CONFIG = genconfig_shadow;
+#endif
+ if (!ds1302_probe()) {
+ printk(KERN_WARNING "%s: RTC not found.\n", ds1302_name);
+ return -1;
+ }
+#else
+ printk(KERN_WARNING "%s: RTC not found.\n", ds1302_name);
+ return -1;
+#endif
+ }
+ /* Initialise trickle charger */
+ ds1302_writereg(RTC_TRICKLECHARGER,
+ RTC_TCR_PATTERN |(CONFIG_ETRAX_DS1302_TRICKLE_CHARGE & 0x0F));
+ /* Start clock by resetting CLOCK_HALT */
+ ds1302_writereg(RTC_SECONDS, (ds1302_readreg(RTC_SECONDS) & 0x7F));
+ return 0;
+}
+
+static int __init ds1302_register(void)
+{
+ ds1302_init();
+ if (register_chrdev(RTC_MAJOR_NR, ds1302_name, &rtc_fops)) {
+ printk(KERN_INFO "%s: unable to get major %d for rtc\n",
+ ds1302_name, RTC_MAJOR_NR);
+ return -1;
+ }
+ return 0;
+
+}
+
+module_init(ds1302_register);
diff --git a/arch/cris/arch-v10/drivers/eeprom.c b/arch/cris/arch-v10/drivers/eeprom.c
new file mode 100644
index 00000000000..316ca15d680
--- /dev/null
+++ b/arch/cris/arch-v10/drivers/eeprom.c
@@ -0,0 +1,945 @@
+/*!*****************************************************************************
+*!
+*! Implements an interface for i2c compatible eeproms to run under linux.
+*! Supports 2k, 8k(?) and 16k. Uses adaptive timing adjustents by
+*! Johan.Adolfsson@axis.com
+*!
+*! Probing results:
+*! 8k or not is detected (the assumes 2k or 16k)
+*! 2k or 16k detected using test reads and writes.
+*!
+*!------------------------------------------------------------------------
+*! HISTORY
+*!
+*! DATE NAME CHANGES
+*! ---- ---- -------
+*! Aug 28 1999 Edgar Iglesias Initial Version
+*! Aug 31 1999 Edgar Iglesias Allow simultaneous users.
+*! Sep 03 1999 Edgar Iglesias Updated probe.
+*! Sep 03 1999 Edgar Iglesias Added bail-out stuff if we get interrupted
+*! in the spin-lock.
+*!
+*! $Log: eeprom.c,v $
+*! Revision 1.10 2003/09/11 07:29:48 starvik
+*! Merge of Linux 2.6.0-test5
+*!
+*! Revision 1.9 2003/07/04 08:27:37 starvik
+*! Merge of Linux 2.5.74
+*!
+*! Revision 1.8 2003/04/09 05:20:47 starvik
+*! Merge of Linux 2.5.67
+*!
+*! Revision 1.6 2003/02/10 07:19:28 starvik
+*! Removed misplaced ;
+*!
+*! Revision 1.5 2002/12/11 13:13:57 starvik
+*! Added arch/ to v10 specific includes
+*! Added fix from Linux 2.4 in serial.c (flush_to_flip_buffer)
+*!
+*! Revision 1.4 2002/11/20 11:56:10 starvik
+*! Merge of Linux 2.5.48
+*!
+*! Revision 1.3 2002/11/18 13:16:06 starvik
+*! Linux 2.5 port of latest 2.4 drivers
+*!
+*! Revision 1.8 2001/06/15 13:24:29 jonashg
+*! * Added verification of pointers from userspace in read and write.
+*! * Made busy counter volatile.
+*! * Added define for inital write delay.
+*! * Removed warnings by using loff_t instead of unsigned long.
+*!
+*! Revision 1.7 2001/06/14 15:26:54 jonashg
+*! Removed test because condition is always true.
+*!
+*! Revision 1.6 2001/06/14 15:18:20 jonashg
+*! Kb -> kB (makes quite a difference if you don't know if you have 2k or 16k).
+*!
+*! Revision 1.5 2001/06/14 14:39:51 jonashg
+*! Forgot to use name when registering the driver.
+*!
+*! Revision 1.4 2001/06/14 14:35:47 jonashg
+*! * Gave driver a name and used it in printk's.
+*! * Cleanup.
+*!
+*! Revision 1.3 2001/03/19 16:04:46 markusl
+*! Fixed init of fops struct
+*!
+*! Revision 1.2 2001/03/19 10:35:07 markusl
+*! 2.4 port of eeprom driver
+*!
+*! Revision 1.8 2000/05/18 10:42:25 edgar
+*! Make sure to end write cycle on _every_ write
+*!
+*! Revision 1.7 2000/01/17 17:41:01 johana
+*! Adjusted probing and return -ENOSPC when writing outside EEPROM
+*!
+*! Revision 1.6 2000/01/17 15:50:36 johana
+*! Added adaptive timing adjustments and fixed autoprobing for 2k and 16k(?)
+*! EEPROMs
+*!
+*! Revision 1.5 1999/09/03 15:07:37 edgar
+*! Added bail-out check to the spinlock
+*!
+*! Revision 1.4 1999/09/03 12:11:17 bjornw
+*! Proper atomicity (need to use spinlocks, not if's). users -> busy.
+*!
+*!
+*! (c) 1999 Axis Communications AB, Lund, Sweden
+*!*****************************************************************************/
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <asm/uaccess.h>
+#include "i2c.h"
+
+#define D(x)
+
+/* If we should use adaptive timing or not: */
+//#define EEPROM_ADAPTIVE_TIMING
+
+#define EEPROM_MAJOR_NR 122 /* use a LOCAL/EXPERIMENTAL major for now */
+#define EEPROM_MINOR_NR 0
+
+/* Empirical sane initial value of the delay, the value will be adapted to
+ * what the chip needs when using EEPROM_ADAPTIVE_TIMING.
+ */
+#define INITIAL_WRITEDELAY_US 4000
+#define MAX_WRITEDELAY_US 10000 /* 10 ms according to spec for 2KB EEPROM */
+
+/* This one defines how many times to try when eeprom fails. */
+#define EEPROM_RETRIES 10
+
+#define EEPROM_2KB (2 * 1024)
+/*#define EEPROM_4KB (4 * 1024)*/ /* Exists but not used in Axis products */
+#define EEPROM_8KB (8 * 1024 - 1 ) /* Last byte has write protection bit */
+#define EEPROM_16KB (16 * 1024)
+
+#define i2c_delay(x) udelay(x)
+
+/*
+ * This structure describes the attached eeprom chip.
+ * The values are probed for.
+ */
+
+struct eeprom_type
+{
+ unsigned long size;
+ unsigned long sequential_write_pagesize;
+ unsigned char select_cmd;
+ unsigned long usec_delay_writecycles; /* Min time between write cycles
+ (up to 10ms for some models) */
+ unsigned long usec_delay_step; /* For adaptive algorithm */
+ int adapt_state; /* 1 = To high , 0 = Even, -1 = To low */
+
+ /* this one is to keep the read/write operations atomic */
+ wait_queue_head_t wait_q;
+ volatile int busy;
+ int retry_cnt_addr; /* Used to keep track of number of retries for
+ adaptive timing adjustments */
+ int retry_cnt_read;
+};
+
+static int eeprom_open(struct inode * inode, struct file * file);
+static loff_t eeprom_lseek(struct file * file, loff_t offset, int orig);
+static ssize_t eeprom_read(struct file * file, char * buf, size_t count,
+ loff_t *off);
+static ssize_t eeprom_write(struct file * file, const char * buf, size_t count,
+ loff_t *off);
+static int eeprom_close(struct inode * inode, struct file * file);
+
+static int eeprom_address(unsigned long addr);
+static int read_from_eeprom(char * buf, int count);
+static int eeprom_write_buf(loff_t addr, const char * buf, int count);
+static int eeprom_read_buf(loff_t addr, char * buf, int count);
+
+static void eeprom_disable_write_protect(void);
+
+
+static const char eeprom_name[] = "eeprom";
+
+/* chip description */
+static struct eeprom_type eeprom;
+
+/* This is the exported file-operations structure for this device. */
+struct file_operations eeprom_fops =
+{
+ .llseek = eeprom_lseek,
+ .read = eeprom_read,
+ .write = eeprom_write,
+ .open = eeprom_open,
+ .release = eeprom_close
+};
+
+/* eeprom init call. Probes for different eeprom models. */
+
+int __init eeprom_init(void)
+{
+ init_waitqueue_head(&eeprom.wait_q);
+ eeprom.busy = 0;
+
+#ifdef CONFIG_ETRAX_I2C_EEPROM_PROBE
+#define EETEXT "Found"
+#else
+#define EETEXT "Assuming"
+#endif
+ if (register_chrdev(EEPROM_MAJOR_NR, eeprom_name, &eeprom_fops))
+ {
+ printk(KERN_INFO "%s: unable to get major %d for eeprom device\n",
+ eeprom_name, EEPROM_MAJOR_NR);
+ return -1;
+ }
+
+ printk("EEPROM char device v0.3, (c) 2000 Axis Communications AB\n");
+
+ /*
+ * Note: Most of this probing method was taken from the printserver (5470e)
+ * codebase. It did not contain a way of finding the 16kB chips
+ * (M24128 or variants). The method used here might not work
+ * for all models. If you encounter problems the easiest way
+ * is probably to define your model within #ifdef's, and hard-
+ * code it.
+ */
+
+ eeprom.size = 0;
+ eeprom.usec_delay_writecycles = INITIAL_WRITEDELAY_US;
+ eeprom.usec_delay_step = 128;
+ eeprom.adapt_state = 0;
+
+#ifdef CONFIG_ETRAX_I2C_EEPROM_PROBE
+ i2c_start();
+ i2c_outbyte(0x80);
+ if(!i2c_getack())
+ {
+ /* It's not 8k.. */
+ int success = 0;
+ unsigned char buf_2k_start[16];
+
+ /* Im not sure this will work... :) */
+ /* assume 2kB, if failure go for 16kB */
+ /* Test with 16kB settings.. */
+ /* If it's a 2kB EEPROM and we address it outside it's range
+ * it will mirror the address space:
+ * 1. We read two locations (that are mirrored),
+ * if the content differs * it's a 16kB EEPROM.
+ * 2. if it doesn't differ - write different value to one of the locations,
+ * check the other - if content still is the same it's a 2k EEPROM,
+ * restore original data.
+ */
+#define LOC1 8
+#define LOC2 (0x1fb) /*1fb, 3ed, 5df, 7d1 */
+
+ /* 2k settings */
+ i2c_stop();
+ eeprom.size = EEPROM_2KB;
+ eeprom.select_cmd = 0xA0;
+ eeprom.sequential_write_pagesize = 16;
+ if( eeprom_read_buf( 0, buf_2k_start, 16 ) == 16 )
+ {
+ D(printk("2k start: '%16.16s'\n", buf_2k_start));
+ }
+ else
+ {
+ printk(KERN_INFO "%s: Failed to read in 2k mode!\n", eeprom_name);
+ }
+
+ /* 16k settings */
+ eeprom.size = EEPROM_16KB;
+ eeprom.select_cmd = 0xA0;
+ eeprom.sequential_write_pagesize = 64;
+
+ {
+ unsigned char loc1[4], loc2[4], tmp[4];
+ if( eeprom_read_buf(LOC2, loc2, 4) == 4)
+ {
+ if( eeprom_read_buf(LOC1, loc1, 4) == 4)
+ {
+ D(printk("0 loc1: (%i) '%4.4s' loc2 (%i) '%4.4s'\n",
+ LOC1, loc1, LOC2, loc2));
+#if 0
+ if (memcmp(loc1, loc2, 4) != 0 )
+ {
+ /* It's 16k */
+ printk(KERN_INFO "%s: 16k detected in step 1\n", eeprom_name);
+ eeprom.size = EEPROM_16KB;
+ success = 1;
+ }
+ else
+#endif
+ {
+ /* Do step 2 check */
+ /* Invert value */
+ loc1[0] = ~loc1[0];
+ if (eeprom_write_buf(LOC1, loc1, 1) == 1)
+ {
+ /* If 2k EEPROM this write will actually write 10 bytes
+ * from pos 0
+ */
+ D(printk("1 loc1: (%i) '%4.4s' loc2 (%i) '%4.4s'\n",
+ LOC1, loc1, LOC2, loc2));
+ if( eeprom_read_buf(LOC1, tmp, 4) == 4)
+ {
+ D(printk("2 loc1: (%i) '%4.4s' tmp '%4.4s'\n",
+ LOC1, loc1, tmp));
+ if (memcmp(loc1, tmp, 4) != 0 )
+ {
+ printk(KERN_INFO "%s: read and write differs! Not 16kB\n",
+ eeprom_name);
+ loc1[0] = ~loc1[0];
+
+ if (eeprom_write_buf(LOC1, loc1, 1) == 1)
+ {
+ success = 1;
+ }
+ else
+ {
+ printk(KERN_INFO "%s: Restore 2k failed during probe,"
+ " EEPROM might be corrupt!\n", eeprom_name);
+
+ }
+ i2c_stop();
+ /* Go to 2k mode and write original data */
+ eeprom.size = EEPROM_2KB;
+ eeprom.select_cmd = 0xA0;
+ eeprom.sequential_write_pagesize = 16;
+ if( eeprom_write_buf(0, buf_2k_start, 16) == 16)
+ {
+ }
+ else
+ {
+ printk(KERN_INFO "%s: Failed to write back 2k start!\n",
+ eeprom_name);
+ }
+
+ eeprom.size = EEPROM_2KB;
+ }
+ }
+
+ if(!success)
+ {
+ if( eeprom_read_buf(LOC2, loc2, 1) == 1)
+ {
+ D(printk("0 loc1: (%i) '%4.4s' loc2 (%i) '%4.4s'\n",
+ LOC1, loc1, LOC2, loc2));
+ if (memcmp(loc1, loc2, 4) == 0 )
+ {
+ /* Data the same, must be mirrored -> 2k */
+ /* Restore data */
+ printk(KERN_INFO "%s: 2k detected in step 2\n", eeprom_name);
+ loc1[0] = ~loc1[0];
+ if (eeprom_write_buf(LOC1, loc1, 1) == 1)
+ {
+ success = 1;
+ }
+ else
+ {
+ printk(KERN_INFO "%s: Restore 2k failed during probe,"
+ " EEPROM might be corrupt!\n", eeprom_name);
+
+ }
+
+ eeprom.size = EEPROM_2KB;
+ }
+ else
+ {
+ printk(KERN_INFO "%s: 16k detected in step 2\n",
+ eeprom_name);
+ loc1[0] = ~loc1[0];
+ /* Data differs, assume 16k */
+ /* Restore data */
+ if (eeprom_write_buf(LOC1, loc1, 1) == 1)
+ {
+ success = 1;
+ }
+ else
+ {
+ printk(KERN_INFO "%s: Restore 16k failed during probe,"
+ " EEPROM might be corrupt!\n", eeprom_name);
+ }
+
+ eeprom.size = EEPROM_16KB;
+ }
+ }
+ }
+ }
+ } /* read LOC1 */
+ } /* address LOC1 */
+ if (!success)
+ {
+ printk(KERN_INFO "%s: Probing failed!, using 2KB!\n", eeprom_name);
+ eeprom.size = EEPROM_2KB;
+ }
+ } /* read */
+ }
+ }
+ else
+ {
+ i2c_outbyte(0x00);
+ if(!i2c_getack())
+ {
+ /* No 8k */
+ eeprom.size = EEPROM_2KB;
+ }
+ else
+ {
+ i2c_start();
+ i2c_outbyte(0x81);
+ if (!i2c_getack())
+ {
+ eeprom.size = EEPROM_2KB;
+ }
+ else
+ {
+ /* It's a 8kB */
+ i2c_inbyte();
+ eeprom.size = EEPROM_8KB;
+ }
+ }
+ }
+ i2c_stop();
+#elif defined(CONFIG_ETRAX_I2C_EEPROM_16KB)
+ eeprom.size = EEPROM_16KB;
+#elif defined(CONFIG_ETRAX_I2C_EEPROM_8KB)
+ eeprom.size = EEPROM_8KB;
+#elif defined(CONFIG_ETRAX_I2C_EEPROM_2KB)
+ eeprom.size = EEPROM_2KB;
+#endif
+
+ switch(eeprom.size)
+ {
+ case (EEPROM_2KB):
+ printk("%s: " EETEXT " i2c compatible 2kB eeprom.\n", eeprom_name);
+ eeprom.sequential_write_pagesize = 16;
+ eeprom.select_cmd = 0xA0;
+ break;
+ case (EEPROM_8KB):
+ printk("%s: " EETEXT " i2c compatible 8kB eeprom.\n", eeprom_name);
+ eeprom.sequential_write_pagesize = 16;
+ eeprom.select_cmd = 0x80;
+ break;
+ case (EEPROM_16KB):
+ printk("%s: " EETEXT " i2c compatible 16kB eeprom.\n", eeprom_name);
+ eeprom.sequential_write_pagesize = 64;
+ eeprom.select_cmd = 0xA0;
+ break;
+ default:
+ eeprom.size = 0;
+ printk("%s: Did not find a supported eeprom\n", eeprom_name);
+ break;
+ }
+
+
+
+ eeprom_disable_write_protect();
+
+ return 0;
+}
+
+/* Opens the device. */
+
+static int eeprom_open(struct inode * inode, struct file * file)
+{
+
+ if(MINOR(inode->i_rdev) != EEPROM_MINOR_NR)
+ return -ENXIO;
+ if(MAJOR(inode->i_rdev) != EEPROM_MAJOR_NR)
+ return -ENXIO;
+
+ if( eeprom.size > 0 )
+ {
+ /* OK */
+ return 0;
+ }
+
+ /* No EEprom found */
+ return -EFAULT;
+}
+
+/* Changes the current file position. */
+
+static loff_t eeprom_lseek(struct file * file, loff_t offset, int orig)
+{
+/*
+ * orig 0: position from begning of eeprom
+ * orig 1: relative from current position
+ * orig 2: position from last eeprom address
+ */
+
+ switch (orig)
+ {
+ case 0:
+ file->f_pos = offset;
+ break;
+ case 1:
+ file->f_pos += offset;
+ break;
+ case 2:
+ file->f_pos = eeprom.size - offset;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* truncate position */
+ if (file->f_pos < 0)
+ {
+ file->f_pos = 0;
+ return(-EOVERFLOW);
+ }
+
+ if (file->f_pos >= eeprom.size)
+ {
+ file->f_pos = eeprom.size - 1;
+ return(-EOVERFLOW);
+ }
+
+ return ( file->f_pos );
+}
+
+/* Reads data from eeprom. */
+
+static int eeprom_read_buf(loff_t addr, char * buf, int count)
+{
+ struct file f;
+
+ f.f_pos = addr;
+ return eeprom_read(&f, buf, count, &addr);
+}
+
+
+
+/* Reads data from eeprom. */
+
+static ssize_t eeprom_read(struct file * file, char * buf, size_t count, loff_t *off)
+{
+ int read=0;
+ unsigned long p = file->f_pos;
+
+ unsigned char page;
+
+ if(p >= eeprom.size) /* Address i 0 - (size-1) */
+ {
+ return -EFAULT;
+ }
+
+ while(eeprom.busy)
+ {
+ interruptible_sleep_on(&eeprom.wait_q);
+
+ /* bail out if we get interrupted */
+ if (signal_pending(current))
+ return -EINTR;
+
+ }
+ eeprom.busy++;
+
+ page = (unsigned char) (p >> 8);
+
+ if(!eeprom_address(p))
+ {
+ printk(KERN_INFO "%s: Read failed to address the eeprom: "
+ "0x%08X (%i) page: %i\n", eeprom_name, (int)p, (int)p, page);
+ i2c_stop();
+
+ /* don't forget to wake them up */
+ eeprom.busy--;
+ wake_up_interruptible(&eeprom.wait_q);
+ return -EFAULT;
+ }
+
+ if( (p + count) > eeprom.size)
+ {
+ /* truncate count */
+ count = eeprom.size - p;
+ }
+
+ /* stop dummy write op and initiate the read op */
+ i2c_start();
+
+ /* special case for small eeproms */
+ if(eeprom.size < EEPROM_16KB)
+ {
+ i2c_outbyte( eeprom.select_cmd | 1 | (page << 1) );
+ }
+
+ /* go on with the actual read */
+ read = read_from_eeprom( buf, count);
+
+ if(read > 0)
+ {
+ file->f_pos += read;
+ }
+
+ eeprom.busy--;
+ wake_up_interruptible(&eeprom.wait_q);
+ return read;
+}
+
+/* Writes data to eeprom. */
+
+static int eeprom_write_buf(loff_t addr, const char * buf, int count)
+{
+ struct file f;
+
+ f.f_pos = addr;
+
+ return eeprom_write(&f, buf, count, &addr);
+}
+
+
+/* Writes data to eeprom. */
+
+static ssize_t eeprom_write(struct file * file, const char * buf, size_t count,
+ loff_t *off)
+{
+ int i, written, restart=1;
+ unsigned long p;
+
+ if (!access_ok(VERIFY_READ, buf, count))
+ {
+ return -EFAULT;
+ }
+
+ while(eeprom.busy)
+ {
+ interruptible_sleep_on(&eeprom.wait_q);
+ /* bail out if we get interrupted */
+ if (signal_pending(current))
+ return -EINTR;
+ }
+ eeprom.busy++;
+ for(i = 0; (i < EEPROM_RETRIES) && (restart > 0); i++)
+ {
+ restart = 0;
+ written = 0;
+ p = file->f_pos;
+
+
+ while( (written < count) && (p < eeprom.size))
+ {
+ /* address the eeprom */
+ if(!eeprom_address(p))
+ {
+ printk(KERN_INFO "%s: Write failed to address the eeprom: "
+ "0x%08X (%i) \n", eeprom_name, (int)p, (int)p);
+ i2c_stop();
+
+ /* don't forget to wake them up */
+ eeprom.busy--;
+ wake_up_interruptible(&eeprom.wait_q);
+ return -EFAULT;
+ }
+#ifdef EEPROM_ADAPTIVE_TIMING
+ /* Adaptive algorithm to adjust timing */
+ if (eeprom.retry_cnt_addr > 0)
+ {
+ /* To Low now */
+ D(printk(">D=%i d=%i\n",
+ eeprom.usec_delay_writecycles, eeprom.usec_delay_step));
+
+ if (eeprom.usec_delay_step < 4)
+ {
+ eeprom.usec_delay_step++;
+ eeprom.usec_delay_writecycles += eeprom.usec_delay_step;
+ }
+ else
+ {
+
+ if (eeprom.adapt_state > 0)
+ {
+ /* To Low before */
+ eeprom.usec_delay_step *= 2;
+ if (eeprom.usec_delay_step > 2)
+ {
+ eeprom.usec_delay_step--;
+ }
+ eeprom.usec_delay_writecycles += eeprom.usec_delay_step;
+ }
+ else if (eeprom.adapt_state < 0)
+ {
+ /* To High before (toggle dir) */
+ eeprom.usec_delay_writecycles += eeprom.usec_delay_step;
+ if (eeprom.usec_delay_step > 1)
+ {
+ eeprom.usec_delay_step /= 2;
+ eeprom.usec_delay_step--;
+ }
+ }
+ }
+
+ eeprom.adapt_state = 1;
+ }
+ else
+ {
+ /* To High (or good) now */
+ D(printk("<D=%i d=%i\n",
+ eeprom.usec_delay_writecycles, eeprom.usec_delay_step));
+
+ if (eeprom.adapt_state < 0)
+ {
+ /* To High before */
+ if (eeprom.usec_delay_step > 1)
+ {
+ eeprom.usec_delay_step *= 2;
+ eeprom.usec_delay_step--;
+
+ if (eeprom.usec_delay_writecycles > eeprom.usec_delay_step)
+ {
+ eeprom.usec_delay_writecycles -= eeprom.usec_delay_step;
+ }
+ }
+ }
+ else if (eeprom.adapt_state > 0)
+ {
+ /* To Low before (toggle dir) */
+ if (eeprom.usec_delay_writecycles > eeprom.usec_delay_step)
+ {
+ eeprom.usec_delay_writecycles -= eeprom.usec_delay_step;
+ }
+ if (eeprom.usec_delay_step > 1)
+ {
+ eeprom.usec_delay_step /= 2;
+ eeprom.usec_delay_step--;
+ }
+
+ eeprom.adapt_state = -1;
+ }
+
+ if (eeprom.adapt_state > -100)
+ {
+ eeprom.adapt_state--;
+ }
+ else
+ {
+ /* Restart adaption */
+ D(printk("#Restart\n"));
+ eeprom.usec_delay_step++;
+ }
+ }
+#endif /* EEPROM_ADAPTIVE_TIMING */
+ /* write until we hit a page boundary or count */
+ do
+ {
+ i2c_outbyte(buf[written]);
+ if(!i2c_getack())
+ {
+ restart=1;
+ printk(KERN_INFO "%s: write error, retrying. %d\n", eeprom_name, i);
+ i2c_stop();
+ break;
+ }
+ written++;
+ p++;
+ } while( written < count && ( p % eeprom.sequential_write_pagesize ));
+
+ /* end write cycle */
+ i2c_stop();
+ i2c_delay(eeprom.usec_delay_writecycles);
+ } /* while */
+ } /* for */
+
+ eeprom.busy--;
+ wake_up_interruptible(&eeprom.wait_q);
+ if (written == 0 && file->f_pos >= eeprom.size){
+ return -ENOSPC;
+ }
+ file->f_pos += written;
+ return written;
+}
+
+/* Closes the device. */
+
+static int eeprom_close(struct inode * inode, struct file * file)
+{
+ /* do nothing for now */
+ return 0;
+}
+
+/* Sets the current address of the eeprom. */
+
+static int eeprom_address(unsigned long addr)
+{
+ int i;
+ unsigned char page, offset;
+
+ page = (unsigned char) (addr >> 8);
+ offset = (unsigned char) addr;
+
+ for(i = 0; i < EEPROM_RETRIES; i++)
+ {
+ /* start a dummy write for addressing */
+ i2c_start();
+
+ if(eeprom.size == EEPROM_16KB)
+ {
+ i2c_outbyte( eeprom.select_cmd );
+ i2c_getack();
+ i2c_outbyte(page);
+ }
+ else
+ {
+ i2c_outbyte( eeprom.select_cmd | (page << 1) );
+ }
+ if(!i2c_getack())
+ {
+ /* retry */
+ i2c_stop();
+ /* Must have a delay here.. 500 works, >50, 100->works 5th time*/
+ i2c_delay(MAX_WRITEDELAY_US / EEPROM_RETRIES * i);
+ /* The chip needs up to 10 ms from write stop to next start */
+
+ }
+ else
+ {
+ i2c_outbyte(offset);
+
+ if(!i2c_getack())
+ {
+ /* retry */
+ i2c_stop();
+ }
+ else
+ break;
+ }
+ }
+
+
+ eeprom.retry_cnt_addr = i;
+ D(printk("%i\n", eeprom.retry_cnt_addr));
+ if(eeprom.retry_cnt_addr == EEPROM_RETRIES)
+ {
+ /* failed */
+ return 0;
+ }
+ return 1;
+}
+
+/* Reads from current address. */
+
+static int read_from_eeprom(char * buf, int count)
+{
+ int i, read=0;
+
+ for(i = 0; i < EEPROM_RETRIES; i++)
+ {
+ if(eeprom.size == EEPROM_16KB)
+ {
+ i2c_outbyte( eeprom.select_cmd | 1 );
+ }
+
+ if(i2c_getack())
+ {
+ break;
+ }
+ }
+
+ if(i == EEPROM_RETRIES)
+ {
+ printk(KERN_INFO "%s: failed to read from eeprom\n", eeprom_name);
+ i2c_stop();
+
+ return -EFAULT;
+ }
+
+ while( (read < count))
+ {
+ if (put_user(i2c_inbyte(), &buf[read++]))
+ {
+ i2c_stop();
+
+ return -EFAULT;
+ }
+
+ /*
+ * make sure we don't ack last byte or you will get very strange
+ * results!
+ */
+ if(read < count)
+ {
+ i2c_sendack();
+ }
+ }
+
+ /* stop the operation */
+ i2c_stop();
+
+ return read;
+}
+
+/* Disables write protection if applicable. */
+
+#define DBP_SAVE(x)
+#define ax_printf printk
+static void eeprom_disable_write_protect(void)
+{
+ /* Disable write protect */
+ if (eeprom.size == EEPROM_8KB)
+ {
+ /* Step 1 Set WEL = 1 (write 00000010 to address 1FFFh */
+ i2c_start();
+ i2c_outbyte(0xbe);
+ if(!i2c_getack())
+ {
+ DBP_SAVE(ax_printf("Get ack returns false\n"));
+ }
+ i2c_outbyte(0xFF);
+ if(!i2c_getack())
+ {
+ DBP_SAVE(ax_printf("Get ack returns false 2\n"));
+ }
+ i2c_outbyte(0x02);
+ if(!i2c_getack())
+ {
+ DBP_SAVE(ax_printf("Get ack returns false 3\n"));
+ }
+ i2c_stop();
+
+ i2c_delay(1000);
+
+ /* Step 2 Set RWEL = 1 (write 00000110 to address 1FFFh */
+ i2c_start();
+ i2c_outbyte(0xbe);
+ if(!i2c_getack())
+ {
+ DBP_SAVE(ax_printf("Get ack returns false 55\n"));
+ }
+ i2c_outbyte(0xFF);
+ if(!i2c_getack())
+ {
+ DBP_SAVE(ax_printf("Get ack returns false 52\n"));
+ }
+ i2c_outbyte(0x06);
+ if(!i2c_getack())
+ {
+ DBP_SAVE(ax_printf("Get ack returns false 53\n"));
+ }
+ i2c_stop();
+
+ /* Step 3 Set BP1, BP0, and/or WPEN bits (write 00000110 to address 1FFFh */
+ i2c_start();
+ i2c_outbyte(0xbe);
+ if(!i2c_getack())
+ {
+ DBP_SAVE(ax_printf("Get ack returns false 56\n"));
+ }
+ i2c_outbyte(0xFF);
+ if(!i2c_getack())
+ {
+ DBP_SAVE(ax_printf("Get ack returns false 57\n"));
+ }
+ i2c_outbyte(0x06);
+ if(!i2c_getack())
+ {
+ DBP_SAVE(ax_printf("Get ack returns false 58\n"));
+ }
+ i2c_stop();
+
+ /* Write protect disabled */
+ }
+}
+
+module_init(eeprom_init);
diff --git a/arch/cris/arch-v10/drivers/gpio.c b/arch/cris/arch-v10/drivers/gpio.c
new file mode 100644
index 00000000000..c095de82a0d
--- /dev/null
+++ b/arch/cris/arch-v10/drivers/gpio.c
@@ -0,0 +1,944 @@
+/* $Id: gpio.c,v 1.12 2004/08/24 07:19:59 starvik Exp $
+ *
+ * Etrax general port I/O device
+ *
+ * Copyright (c) 1999, 2000, 2001, 2002 Axis Communications AB
+ *
+ * Authors: Bjorn Wesen (initial version)
+ * Ola Knutsson (LED handling)
+ * Johan Adolfsson (read/set directions, write, port G)
+ *
+ * $Log: gpio.c,v $
+ * Revision 1.12 2004/08/24 07:19:59 starvik
+ * Whitespace cleanup
+ *
+ * Revision 1.11 2004/05/14 07:58:03 starvik
+ * Merge of changes from 2.4
+ *
+ * Revision 1.9 2003/09/11 07:29:48 starvik
+ * Merge of Linux 2.6.0-test5
+ *
+ * Revision 1.8 2003/07/04 08:27:37 starvik
+ * Merge of Linux 2.5.74
+ *
+ * Revision 1.7 2003/01/10 07:44:07 starvik
+ * init_ioremap is now called by kernel before drivers are initialized
+ *
+ * Revision 1.6 2002/12/11 13:13:57 starvik
+ * Added arch/ to v10 specific includes
+ * Added fix from Linux 2.4 in serial.c (flush_to_flip_buffer)
+ *
+ * Revision 1.5 2002/11/20 11:56:11 starvik
+ * Merge of Linux 2.5.48
+ *
+ * Revision 1.4 2002/11/18 10:10:05 starvik
+ * Linux 2.5 port of latest gpio.c from Linux 2.4
+ *
+ * Revision 1.20 2002/10/16 21:16:24 johana
+ * Added support for PA high level interrupt.
+ * That gives 2ms response time with iodtest for high levels and 2-12 ms
+ * response time on low levels if the check is not made in
+ * process.c:cpu_idle() as well.
+ *
+ * Revision 1.19 2002/10/14 18:27:33 johana
+ * Implemented alarm handling so select() now works.
+ * Latency is around 6-9 ms with a etrax_gpio_wake_up_check() in
+ * cpu_idle().
+ * Otherwise I get 15-18 ms (same as doing the poll in userspace -
+ * but less overhead).
+ * TODO? Perhaps we should add the check in IMMEDIATE_BH (or whatever it
+ * is in 2.4) as well?
+ * TODO? Perhaps call request_irq()/free_irq() only when needed?
+ * Increased version to 2.5
+ *
+ * Revision 1.18 2002/10/11 15:02:00 johana
+ * Mask inverted 8 bit value in setget_input().
+ *
+ * Revision 1.17 2002/06/17 15:53:01 johana
+ * Added IO_READ_INBITS, IO_READ_OUTBITS, IO_SETGET_INPUT and IO_SETGET_OUTPUT
+ * that take a pointer as argument and thus can handle 32 bit ports (G)
+ * correctly.
+ * These should be used instead of IO_READBITS, IO_SETINPUT and IO_SETOUTPUT.
+ * (especially if Port G bit 31 is used)
+ *
+ * Revision 1.16 2002/06/17 09:59:51 johana
+ * Returning 32 bit values in the ioctl return value doesn't work if bit
+ * 31 is set (could happen for port G), so mask it of with 0x7FFFFFFF.
+ * A new set of ioctl's will be added.
+ *
+ * Revision 1.15 2002/05/06 13:19:13 johana
+ * IO_SETINPUT returns mask with bit set = inputs for PA and PB as well.
+ *
+ * Revision 1.14 2002/04/12 12:01:53 johana
+ * Use global r_port_g_data_shadow.
+ * Moved gpio_init_port_g() closer to gpio_init() and marked it __init.
+ *
+ * Revision 1.13 2002/04/10 12:03:55 johana
+ * Added support for port G /dev/gpiog (minor 3).
+ * Changed indentation on switch cases.
+ * Fixed other spaces to tabs.
+ *
+ * Revision 1.12 2001/11/12 19:42:15 pkj
+ * * Corrected return values from gpio_leds_ioctl().
+ * * Fixed compiler warnings.
+ *
+ * Revision 1.11 2001/10/30 14:39:12 johana
+ * Added D() around gpio_write printk.
+ *
+ * Revision 1.10 2001/10/25 10:24:42 johana
+ * Added IO_CFG_WRITE_MODE ioctl and write method that can do fast
+ * bittoggling in the kernel. (This speeds up programming an FPGA with 450kB
+ * from ~60 seconds to 4 seconds).
+ * Added save_flags/cli/restore_flags in ioctl.
+ *
+ * Revision 1.9 2001/05/04 14:16:07 matsfg
+ * Corrected spelling error
+ *
+ * Revision 1.8 2001/04/27 13:55:26 matsfg
+ * Moved initioremap.
+ * Turns off all LEDS on init.
+ * Added support for shutdown and powerbutton.
+ *
+ * Revision 1.7 2001/04/04 13:30:08 matsfg
+ * Added bitset and bitclear for leds. Calls init_ioremap to set up memmapping
+ *
+ * Revision 1.6 2001/03/26 16:03:06 bjornw
+ * Needs linux/config.h
+ *
+ * Revision 1.5 2001/03/26 14:22:03 bjornw
+ * Namechange of some config options
+ *
+ * Revision 1.4 2001/02/27 13:52:48 bjornw
+ * malloc.h -> slab.h
+ *
+ * Revision 1.3 2001/01/24 15:06:48 bjornw
+ * gpio_wq correct type
+ *
+ * Revision 1.2 2001/01/18 16:07:30 bjornw
+ * 2.4 port
+ *
+ * Revision 1.1 2001/01/18 15:55:16 bjornw
+ * Verbatim copy of etraxgpio.c from elinux 2.0 added
+ *
+ *
+ */
+
+#include <linux/config.h>
+
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/ioport.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/poll.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+
+#include <asm/etraxgpio.h>
+#include <asm/arch/svinto.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/irq.h>
+
+#define GPIO_MAJOR 120 /* experimental MAJOR number */
+
+#define D(x)
+
+#if 0
+static int dp_cnt;
+#define DP(x) do { dp_cnt++; if (dp_cnt % 1000 == 0) x; }while(0)
+#else
+#define DP(x)
+#endif
+
+static char gpio_name[] = "etrax gpio";
+
+#if 0
+static wait_queue_head_t *gpio_wq;
+#endif
+
+static int gpio_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg);
+static ssize_t gpio_write(struct file * file, const char * buf, size_t count,
+ loff_t *off);
+static int gpio_open(struct inode *inode, struct file *filp);
+static int gpio_release(struct inode *inode, struct file *filp);
+static unsigned int gpio_poll(struct file *filp, struct poll_table_struct *wait);
+
+/* private data per open() of this driver */
+
+struct gpio_private {
+ struct gpio_private *next;
+ /* These fields are for PA and PB only */
+ volatile unsigned char *port, *shadow;
+ volatile unsigned char *dir, *dir_shadow;
+ unsigned char changeable_dir;
+ unsigned char changeable_bits;
+ unsigned char clk_mask;
+ unsigned char data_mask;
+ unsigned char write_msb;
+ unsigned char pad1, pad2, pad3;
+ /* These fields are generic */
+ unsigned long highalarm, lowalarm;
+ wait_queue_head_t alarm_wq;
+ int minor;
+};
+
+/* linked list of alarms to check for */
+
+static struct gpio_private *alarmlist = 0;
+
+static int gpio_some_alarms = 0; /* Set if someone uses alarm */
+static unsigned long gpio_pa_irq_enabled_mask = 0;
+
+/* Port A and B use 8 bit access, but Port G is 32 bit */
+#define NUM_PORTS (GPIO_MINOR_B+1)
+
+static volatile unsigned char *ports[NUM_PORTS] = {
+ R_PORT_PA_DATA,
+ R_PORT_PB_DATA,
+};
+static volatile unsigned char *shads[NUM_PORTS] = {
+ &port_pa_data_shadow,
+ &port_pb_data_shadow
+};
+
+/* What direction bits that are user changeable 1=changeable*/
+#ifndef CONFIG_ETRAX_PA_CHANGEABLE_DIR
+#define CONFIG_ETRAX_PA_CHANGEABLE_DIR 0x00
+#endif
+#ifndef CONFIG_ETRAX_PB_CHANGEABLE_DIR
+#define CONFIG_ETRAX_PB_CHANGEABLE_DIR 0x00
+#endif
+
+#ifndef CONFIG_ETRAX_PA_CHANGEABLE_BITS
+#define CONFIG_ETRAX_PA_CHANGEABLE_BITS 0xFF
+#endif
+#ifndef CONFIG_ETRAX_PB_CHANGEABLE_BITS
+#define CONFIG_ETRAX_PB_CHANGEABLE_BITS 0xFF
+#endif
+
+
+static unsigned char changeable_dir[NUM_PORTS] = {
+ CONFIG_ETRAX_PA_CHANGEABLE_DIR,
+ CONFIG_ETRAX_PB_CHANGEABLE_DIR
+};
+static unsigned char changeable_bits[NUM_PORTS] = {
+ CONFIG_ETRAX_PA_CHANGEABLE_BITS,
+ CONFIG_ETRAX_PB_CHANGEABLE_BITS
+};
+
+static volatile unsigned char *dir[NUM_PORTS] = {
+ R_PORT_PA_DIR,
+ R_PORT_PB_DIR
+};
+
+static volatile unsigned char *dir_shadow[NUM_PORTS] = {
+ &port_pa_dir_shadow,
+ &port_pb_dir_shadow
+};
+
+/* Port G is 32 bit, handle it special, some bits are both inputs
+ and outputs at the same time, only some of the bits can change direction
+ and some of them in groups of 8 bit. */
+static unsigned long changeable_dir_g;
+static unsigned long dir_g_in_bits;
+static unsigned long dir_g_out_bits;
+static unsigned long dir_g_shadow; /* 1=output */
+
+#define USE_PORTS(priv) ((priv)->minor <= GPIO_MINOR_B)
+
+
+
+static unsigned int
+gpio_poll(struct file *file,
+ poll_table *wait)
+{
+ unsigned int mask = 0;
+ struct gpio_private *priv = (struct gpio_private *)file->private_data;
+ unsigned long data;
+ poll_wait(file, &priv->alarm_wq, wait);
+ if (priv->minor == GPIO_MINOR_A) {
+ unsigned long flags;
+ unsigned long tmp;
+ data = *R_PORT_PA_DATA;
+ /* PA has support for high level interrupt -
+ * lets activate for those low and with highalarm set
+ */
+ tmp = ~data & priv->highalarm & 0xFF;
+ tmp = (tmp << R_IRQ_MASK1_SET__pa0__BITNR);
+ save_flags(flags); cli();
+ gpio_pa_irq_enabled_mask |= tmp;
+ *R_IRQ_MASK1_SET = tmp;
+ restore_flags(flags);
+
+ } else if (priv->minor == GPIO_MINOR_B)
+ data = *R_PORT_PB_DATA;
+ else if (priv->minor == GPIO_MINOR_G)
+ data = *R_PORT_G_DATA;
+ else
+ return 0;
+
+ if ((data & priv->highalarm) ||
+ (~data & priv->lowalarm)) {
+ mask = POLLIN|POLLRDNORM;
+ }
+
+ DP(printk("gpio_poll ready: mask 0x%08X\n", mask));
+ return mask;
+}
+
+int etrax_gpio_wake_up_check(void)
+{
+ struct gpio_private *priv = alarmlist;
+ unsigned long data = 0;
+ int ret = 0;
+ while (priv) {
+ if (USE_PORTS(priv)) {
+ data = *priv->port;
+ } else if (priv->minor == GPIO_MINOR_G) {
+ data = *R_PORT_G_DATA;
+ }
+ if ((data & priv->highalarm) ||
+ (~data & priv->lowalarm)) {
+ DP(printk("etrax_gpio_wake_up_check %i\n",priv->minor));
+ wake_up_interruptible(&priv->alarm_wq);
+ ret = 1;
+ }
+ priv = priv->next;
+ }
+ return ret;
+}
+
+static irqreturn_t
+gpio_poll_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ if (gpio_some_alarms) {
+ etrax_gpio_wake_up_check();
+ return IRQ_HANDLED;
+ }
+ return IRQ_NONE;
+}
+
+static irqreturn_t
+gpio_pa_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ unsigned long tmp;
+ /* Find what PA interrupts are active */
+ tmp = (*R_IRQ_READ1);
+
+ /* Find those that we have enabled */
+ tmp &= gpio_pa_irq_enabled_mask;
+
+ /* Clear them.. */
+ *R_IRQ_MASK1_CLR = tmp;
+ gpio_pa_irq_enabled_mask &= ~tmp;
+
+ if (gpio_some_alarms) {
+ return IRQ_RETVAL(etrax_gpio_wake_up_check());
+ }
+ return IRQ_NONE;
+}
+
+
+static ssize_t gpio_write(struct file * file, const char * buf, size_t count,
+ loff_t *off)
+{
+ struct gpio_private *priv = (struct gpio_private *)file->private_data;
+ unsigned char data, clk_mask, data_mask, write_msb;
+ unsigned long flags;
+ ssize_t retval = count;
+ if (priv->minor !=GPIO_MINOR_A && priv->minor != GPIO_MINOR_B) {
+ return -EFAULT;
+ }
+
+ if (!access_ok(VERIFY_READ, buf, count)) {
+ return -EFAULT;
+ }
+ clk_mask = priv->clk_mask;
+ data_mask = priv->data_mask;
+ /* It must have been configured using the IO_CFG_WRITE_MODE */
+ /* Perhaps a better error code? */
+ if (clk_mask == 0 || data_mask == 0) {
+ return -EPERM;
+ }
+ write_msb = priv->write_msb;
+ D(printk("gpio_write: %lu to data 0x%02X clk 0x%02X msb: %i\n",count, data_mask, clk_mask, write_msb));
+ while (count--) {
+ int i;
+ data = *buf++;
+ if (priv->write_msb) {
+ for (i = 7; i >= 0;i--) {
+ local_irq_save(flags); local_irq_disable();
+ *priv->port = *priv->shadow &= ~clk_mask;
+ if (data & 1<<i)
+ *priv->port = *priv->shadow |= data_mask;
+ else
+ *priv->port = *priv->shadow &= ~data_mask;
+ /* For FPGA: min 5.0ns (DCC) before CCLK high */
+ *priv->port = *priv->shadow |= clk_mask;
+ local_irq_restore(flags);
+ }
+ } else {
+ for (i = 0; i <= 7;i++) {
+ local_irq_save(flags); local_irq_disable();
+ *priv->port = *priv->shadow &= ~clk_mask;
+ if (data & 1<<i)
+ *priv->port = *priv->shadow |= data_mask;
+ else
+ *priv->port = *priv->shadow &= ~data_mask;
+ /* For FPGA: min 5.0ns (DCC) before CCLK high */
+ *priv->port = *priv->shadow |= clk_mask;
+ local_irq_restore(flags);
+ }
+ }
+ }
+ return retval;
+}
+
+
+
+static int
+gpio_open(struct inode *inode, struct file *filp)
+{
+ struct gpio_private *priv;
+ int p = MINOR(inode->i_rdev);
+
+ if (p > GPIO_MINOR_LAST)
+ return -EINVAL;
+
+ priv = (struct gpio_private *)kmalloc(sizeof(struct gpio_private),
+ GFP_KERNEL);
+
+ if (!priv)
+ return -ENOMEM;
+
+ priv->minor = p;
+
+ /* initialize the io/alarm struct and link it into our alarmlist */
+
+ priv->next = alarmlist;
+ alarmlist = priv;
+ if (USE_PORTS(priv)) { /* A and B */
+ priv->port = ports[p];
+ priv->shadow = shads[p];
+ priv->dir = dir[p];
+ priv->dir_shadow = dir_shadow[p];
+ priv->changeable_dir = changeable_dir[p];
+ priv->changeable_bits = changeable_bits[p];
+ } else {
+ priv->port = NULL;
+ priv->shadow = NULL;
+ priv->dir = NULL;
+ priv->dir_shadow = NULL;
+ priv->changeable_dir = 0;
+ priv->changeable_bits = 0;
+ }
+
+ priv->highalarm = 0;
+ priv->lowalarm = 0;
+ priv->clk_mask = 0;
+ priv->data_mask = 0;
+ init_waitqueue_head(&priv->alarm_wq);
+
+ filp->private_data = (void *)priv;
+
+ return 0;
+}
+
+static int
+gpio_release(struct inode *inode, struct file *filp)
+{
+ struct gpio_private *p = alarmlist;
+ struct gpio_private *todel = (struct gpio_private *)filp->private_data;
+
+ /* unlink from alarmlist and free the private structure */
+
+ if (p == todel) {
+ alarmlist = todel->next;
+ } else {
+ while (p->next != todel)
+ p = p->next;
+ p->next = todel->next;
+ }
+
+ kfree(todel);
+ /* Check if there are still any alarms set */
+ p = alarmlist;
+ while (p) {
+ if (p->highalarm | p->lowalarm) {
+ gpio_some_alarms = 1;
+ return 0;
+ }
+ p = p->next;
+ }
+ gpio_some_alarms = 0;
+
+ return 0;
+}
+
+/* Main device API. ioctl's to read/set/clear bits, as well as to
+ * set alarms to wait for using a subsequent select().
+ */
+
+unsigned long inline setget_input(struct gpio_private *priv, unsigned long arg)
+{
+ /* Set direction 0=unchanged 1=input,
+ * return mask with 1=input
+ */
+ unsigned long flags;
+ if (USE_PORTS(priv)) {
+ local_irq_save(flags); local_irq_disable();
+ *priv->dir = *priv->dir_shadow &=
+ ~((unsigned char)arg & priv->changeable_dir);
+ local_irq_restore(flags);
+ return ~(*priv->dir_shadow) & 0xFF; /* Only 8 bits */
+ } else if (priv->minor == GPIO_MINOR_G) {
+ /* We must fiddle with R_GEN_CONFIG to change dir */
+ save_flags(flags); cli();
+ if (((arg & dir_g_in_bits) != arg) &&
+ (arg & changeable_dir_g)) {
+ arg &= changeable_dir_g;
+ /* Clear bits in genconfig to set to input */
+ if (arg & (1<<0)) {
+ genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG,g0dir);
+ dir_g_in_bits |= (1<<0);
+ dir_g_out_bits &= ~(1<<0);
+ }
+ if ((arg & 0x0000FF00) == 0x0000FF00) {
+ genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG,g8_15dir);
+ dir_g_in_bits |= 0x0000FF00;
+ dir_g_out_bits &= ~0x0000FF00;
+ }
+ if ((arg & 0x00FF0000) == 0x00FF0000) {
+ genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG,g16_23dir);
+ dir_g_in_bits |= 0x00FF0000;
+ dir_g_out_bits &= ~0x00FF0000;
+ }
+ if (arg & (1<<24)) {
+ genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG,g24dir);
+ dir_g_in_bits |= (1<<24);
+ dir_g_out_bits &= ~(1<<24);
+ }
+ D(printk(KERN_INFO "gpio: SETINPUT on port G set "
+ "genconfig to 0x%08lX "
+ "in_bits: 0x%08lX "
+ "out_bits: 0x%08lX\n",
+ (unsigned long)genconfig_shadow,
+ dir_g_in_bits, dir_g_out_bits));
+ *R_GEN_CONFIG = genconfig_shadow;
+ /* Must be a >120 ns delay before writing this again */
+
+ }
+ restore_flags(flags);
+ return dir_g_in_bits;
+ }
+ return 0;
+} /* setget_input */
+
+unsigned long inline setget_output(struct gpio_private *priv, unsigned long arg)
+{
+ unsigned long flags;
+ if (USE_PORTS(priv)) {
+ local_irq_save(flags); local_irq_disable();
+ *priv->dir = *priv->dir_shadow |=
+ ((unsigned char)arg & priv->changeable_dir);
+ local_irq_restore(flags);
+ return *priv->dir_shadow;
+ } else if (priv->minor == GPIO_MINOR_G) {
+ /* We must fiddle with R_GEN_CONFIG to change dir */
+ save_flags(flags); cli();
+ if (((arg & dir_g_out_bits) != arg) &&
+ (arg & changeable_dir_g)) {
+ /* Set bits in genconfig to set to output */
+ if (arg & (1<<0)) {
+ genconfig_shadow |= IO_MASK(R_GEN_CONFIG,g0dir);
+ dir_g_out_bits |= (1<<0);
+ dir_g_in_bits &= ~(1<<0);
+ }
+ if ((arg & 0x0000FF00) == 0x0000FF00) {
+ genconfig_shadow |= IO_MASK(R_GEN_CONFIG,g8_15dir);
+ dir_g_out_bits |= 0x0000FF00;
+ dir_g_in_bits &= ~0x0000FF00;
+ }
+ if ((arg & 0x00FF0000) == 0x00FF0000) {
+ genconfig_shadow |= IO_MASK(R_GEN_CONFIG,g16_23dir);
+ dir_g_out_bits |= 0x00FF0000;
+ dir_g_in_bits &= ~0x00FF0000;
+ }
+ if (arg & (1<<24)) {
+ genconfig_shadow |= IO_MASK(R_GEN_CONFIG,g24dir);
+ dir_g_out_bits |= (1<<24);
+ dir_g_in_bits &= ~(1<<24);
+ }
+ D(printk(KERN_INFO "gpio: SETOUTPUT on port G set "
+ "genconfig to 0x%08lX "
+ "in_bits: 0x%08lX "
+ "out_bits: 0x%08lX\n",
+ (unsigned long)genconfig_shadow,
+ dir_g_in_bits, dir_g_out_bits));
+ *R_GEN_CONFIG = genconfig_shadow;
+ /* Must be a >120 ns delay before writing this again */
+ }
+ restore_flags(flags);
+ return dir_g_out_bits & 0x7FFFFFFF;
+ }
+ return 0;
+} /* setget_output */
+
+static int
+gpio_leds_ioctl(unsigned int cmd, unsigned long arg);
+
+static int
+gpio_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ unsigned long flags;
+ unsigned long val;
+ struct gpio_private *priv = (struct gpio_private *)file->private_data;
+ if (_IOC_TYPE(cmd) != ETRAXGPIO_IOCTYPE) {
+ return -EINVAL;
+ }
+
+ switch (_IOC_NR(cmd)) {
+ case IO_READBITS: /* Use IO_READ_INBITS and IO_READ_OUTBITS instead */
+ // read the port
+ if (USE_PORTS(priv)) {
+ return *priv->port;
+ } else if (priv->minor == GPIO_MINOR_G) {
+ return (*R_PORT_G_DATA) & 0x7FFFFFFF;
+ }
+ break;
+ case IO_SETBITS:
+ local_irq_save(flags); local_irq_disable();
+ // set changeable bits with a 1 in arg
+ if (USE_PORTS(priv)) {
+ *priv->port = *priv->shadow |=
+ ((unsigned char)arg & priv->changeable_bits);
+ } else if (priv->minor == GPIO_MINOR_G) {
+ *R_PORT_G_DATA = port_g_data_shadow |= (arg & dir_g_out_bits);
+ }
+ local_irq_restore(flags);
+ break;
+ case IO_CLRBITS:
+ local_irq_save(flags); local_irq_disable();
+ // clear changeable bits with a 1 in arg
+ if (USE_PORTS(priv)) {
+ *priv->port = *priv->shadow &=
+ ~((unsigned char)arg & priv->changeable_bits);
+ } else if (priv->minor == GPIO_MINOR_G) {
+ *R_PORT_G_DATA = port_g_data_shadow &= ~((unsigned long)arg & dir_g_out_bits);
+ }
+ local_irq_restore(flags);
+ break;
+ case IO_HIGHALARM:
+ // set alarm when bits with 1 in arg go high
+ priv->highalarm |= arg;
+ gpio_some_alarms = 1;
+ break;
+ case IO_LOWALARM:
+ // set alarm when bits with 1 in arg go low
+ priv->lowalarm |= arg;
+ gpio_some_alarms = 1;
+ break;
+ case IO_CLRALARM:
+ // clear alarm for bits with 1 in arg
+ priv->highalarm &= ~arg;
+ priv->lowalarm &= ~arg;
+ {
+ /* Must update gpio_some_alarms */
+ struct gpio_private *p = alarmlist;
+ int some_alarms;
+ some_alarms = 0;
+ while (p) {
+ if (p->highalarm | p->lowalarm) {
+ some_alarms = 1;
+ break;
+ }
+ p = p->next;
+ }
+ gpio_some_alarms = some_alarms;
+ }
+ break;
+ case IO_READDIR: /* Use IO_SETGET_INPUT/OUTPUT instead! */
+ /* Read direction 0=input 1=output */
+ if (USE_PORTS(priv)) {
+ return *priv->dir_shadow;
+ } else if (priv->minor == GPIO_MINOR_G) {
+ /* Note: Some bits are both in and out,
+ * Those that are dual is set here as well.
+ */
+ return (dir_g_shadow | dir_g_out_bits) & 0x7FFFFFFF;
+ }
+ case IO_SETINPUT: /* Use IO_SETGET_INPUT instead! */
+ /* Set direction 0=unchanged 1=input,
+ * return mask with 1=input
+ */
+ return setget_input(priv, arg) & 0x7FFFFFFF;
+ break;
+ case IO_SETOUTPUT: /* Use IO_SETGET_OUTPUT instead! */
+ /* Set direction 0=unchanged 1=output,
+ * return mask with 1=output
+ */
+ return setget_output(priv, arg) & 0x7FFFFFFF;
+
+ case IO_SHUTDOWN:
+ SOFT_SHUTDOWN();
+ break;
+ case IO_GET_PWR_BT:
+#if defined (CONFIG_ETRAX_SOFT_SHUTDOWN)
+ return (*R_PORT_G_DATA & ( 1 << CONFIG_ETRAX_POWERBUTTON_BIT));
+#else
+ return 0;
+#endif
+ break;
+ case IO_CFG_WRITE_MODE:
+ priv->clk_mask = arg & 0xFF;
+ priv->data_mask = (arg >> 8) & 0xFF;
+ priv->write_msb = (arg >> 16) & 0x01;
+ /* Check if we're allowed to change the bits and
+ * the direction is correct
+ */
+ if (!((priv->clk_mask & priv->changeable_bits) &&
+ (priv->data_mask & priv->changeable_bits) &&
+ (priv->clk_mask & *priv->dir_shadow) &&
+ (priv->data_mask & *priv->dir_shadow)))
+ {
+ priv->clk_mask = 0;
+ priv->data_mask = 0;
+ return -EPERM;
+ }
+ break;
+ case IO_READ_INBITS:
+ /* *arg is result of reading the input pins */
+ if (USE_PORTS(priv)) {
+ val = *priv->port;
+ } else if (priv->minor == GPIO_MINOR_G) {
+ val = *R_PORT_G_DATA;
+ }
+ if (copy_to_user((unsigned long*)arg, &val, sizeof(val)))
+ return -EFAULT;
+ return 0;
+ break;
+ case IO_READ_OUTBITS:
+ /* *arg is result of reading the output shadow */
+ if (USE_PORTS(priv)) {
+ val = *priv->shadow;
+ } else if (priv->minor == GPIO_MINOR_G) {
+ val = port_g_data_shadow;
+ }
+ if (copy_to_user((unsigned long*)arg, &val, sizeof(val)))
+ return -EFAULT;
+ break;
+ case IO_SETGET_INPUT:
+ /* bits set in *arg is set to input,
+ * *arg updated with current input pins.
+ */
+ if (copy_from_user(&val, (unsigned long*)arg, sizeof(val)))
+ return -EFAULT;
+ val = setget_input(priv, val);
+ if (copy_to_user((unsigned long*)arg, &val, sizeof(val)))
+ return -EFAULT;
+ break;
+ case IO_SETGET_OUTPUT:
+ /* bits set in *arg is set to output,
+ * *arg updated with current output pins.
+ */
+ if (copy_from_user(&val, (unsigned long*)arg, sizeof(val)))
+ return -EFAULT;
+ val = setget_output(priv, val);
+ if (copy_to_user((unsigned long*)arg, &val, sizeof(val)))
+ return -EFAULT;
+ break;
+ default:
+ if (priv->minor == GPIO_MINOR_LEDS)
+ return gpio_leds_ioctl(cmd, arg);
+ else
+ return -EINVAL;
+ } /* switch */
+
+ return 0;
+}
+
+static int
+gpio_leds_ioctl(unsigned int cmd, unsigned long arg)
+{
+ unsigned char green;
+ unsigned char red;
+
+ switch (_IOC_NR(cmd)) {
+ case IO_LEDACTIVE_SET:
+ green = ((unsigned char) arg) & 1;
+ red = (((unsigned char) arg) >> 1) & 1;
+ LED_ACTIVE_SET_G(green);
+ LED_ACTIVE_SET_R(red);
+ break;
+
+ case IO_LED_SETBIT:
+ LED_BIT_SET(arg);
+ break;
+
+ case IO_LED_CLRBIT:
+ LED_BIT_CLR(arg);
+ break;
+
+ default:
+ return -EINVAL;
+ } /* switch */
+
+ return 0;
+}
+
+struct file_operations gpio_fops = {
+ .owner = THIS_MODULE,
+ .poll = gpio_poll,
+ .ioctl = gpio_ioctl,
+ .write = gpio_write,
+ .open = gpio_open,
+ .release = gpio_release,
+};
+
+
+static void __init gpio_init_port_g(void)
+{
+#define GROUPA (0x0000FF3F)
+#define GROUPB (1<<6 | 1<<7)
+#define GROUPC (1<<30 | 1<<31)
+#define GROUPD (0x3FFF0000)
+#define GROUPD_LOW (0x00FF0000)
+ unsigned long used_in_bits = 0;
+ unsigned long used_out_bits = 0;
+ if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, scsi0, select)){
+ used_in_bits |= GROUPA | GROUPB | 0 | 0;
+ used_out_bits |= GROUPA | GROUPB | 0 | 0;
+ }
+ if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, ata, select)) {
+ used_in_bits |= GROUPA | GROUPB | GROUPC | (GROUPD & ~(1<<25|1<<26));
+ used_out_bits |= GROUPA | GROUPB | GROUPC | GROUPD;
+ }
+
+ if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, par0, select)) {
+ used_in_bits |= (GROUPA & ~(1<<0)) | 0 | 0 | 0;
+ used_out_bits |= (GROUPA & ~(1<<0)) | 0 | 0 | 0;
+ }
+ if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, ser2, select)) {
+ used_in_bits |= 0 | GROUPB | 0 | 0;
+ used_out_bits |= 0 | GROUPB | 0 | 0;
+ }
+ /* mio same as shared RAM ? */
+ if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, mio, select)) {
+ used_in_bits |= (GROUPA & ~(1<<0)) | 0 |0 |GROUPD_LOW;
+ used_out_bits |= (GROUPA & ~(1<<0|1<<1|1<<2)) | 0 |0 |GROUPD_LOW;
+ }
+ if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, scsi1, select)) {
+ used_in_bits |= 0 | 0 | GROUPC | GROUPD;
+ used_out_bits |= 0 | 0 | GROUPC | GROUPD;
+ }
+ if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, scsi0w, select)) {
+ used_in_bits |= GROUPA | GROUPB | 0 | (GROUPD_LOW | 1<<24);
+ used_out_bits |= GROUPA | GROUPB | 0 | (GROUPD_LOW | 1<<24 | 1<<25|1<<26);
+ }
+
+ if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, par1, select)) {
+ used_in_bits |= 0 | 0 | 0 | (GROUPD & ~(1<<24));
+ used_out_bits |= 0 | 0 | 0 | (GROUPD & ~(1<<24));
+ }
+ if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, ser3, select)) {
+ used_in_bits |= 0 | 0 | GROUPC | 0;
+ used_out_bits |= 0 | 0 | GROUPC | 0;
+ }
+ /* mio same as shared RAM-W? */
+ if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, mio_w, select)) {
+ used_in_bits |= (GROUPA & ~(1<<0)) | 0 | 0 |GROUPD_LOW;
+ used_out_bits |= (GROUPA & ~(1<<0|1<<1|1<<2)) | 0 | 0 |GROUPD_LOW;
+ }
+ /* TODO: USB p2, parw, sync ser3? */
+
+ /* Initialise the dir_g_shadow etc. depending on genconfig */
+ /* 0=input 1=output */
+ if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, g0dir, out))
+ dir_g_shadow |= (1 << 0);
+ if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, g8_15dir, out))
+ dir_g_shadow |= 0x0000FF00;
+ if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, g16_23dir, out))
+ dir_g_shadow |= 0x00FF0000;
+ if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, g24dir, out))
+ dir_g_shadow |= (1 << 24);
+
+ dir_g_in_bits = ~used_in_bits;
+ dir_g_out_bits = ~used_out_bits;
+
+ changeable_dir_g = 0x01FFFF01; /* all that can change dir */
+ changeable_dir_g &= dir_g_out_bits;
+ changeable_dir_g &= dir_g_in_bits;
+ /* Correct the bits that can change direction */
+ dir_g_out_bits &= ~changeable_dir_g;
+ dir_g_out_bits |= dir_g_shadow;
+ dir_g_in_bits &= ~changeable_dir_g;
+ dir_g_in_bits |= (~dir_g_shadow & changeable_dir_g);
+
+
+ printk(KERN_INFO "GPIO port G: in_bits: 0x%08lX out_bits: 0x%08lX val: %08lX\n",
+ dir_g_in_bits, dir_g_out_bits, (unsigned long)*R_PORT_G_DATA);
+ printk(KERN_INFO "GPIO port G: dir: %08lX changeable: %08lX\n",
+ dir_g_shadow, changeable_dir_g);
+}
+
+/* main driver initialization routine, called from mem.c */
+
+static __init int
+gpio_init(void)
+{
+ int res;
+#if defined (CONFIG_ETRAX_CSP0_LEDS)
+ int i;
+#endif
+
+ /* do the formalities */
+
+ res = register_chrdev(GPIO_MAJOR, gpio_name, &gpio_fops);
+ if (res < 0) {
+ printk(KERN_ERR "gpio: couldn't get a major number.\n");
+ return res;
+ }
+
+ /* Clear all leds */
+#if defined (CONFIG_ETRAX_CSP0_LEDS) || defined (CONFIG_ETRAX_PA_LEDS) || defined (CONFIG_ETRAX_PB_LEDS)
+ LED_NETWORK_SET(0);
+ LED_ACTIVE_SET(0);
+ LED_DISK_READ(0);
+ LED_DISK_WRITE(0);
+
+#if defined (CONFIG_ETRAX_CSP0_LEDS)
+ for (i = 0; i < 32; i++) {
+ LED_BIT_SET(i);
+ }
+#endif
+
+#endif
+ gpio_init_port_g();
+ printk(KERN_INFO "ETRAX 100LX GPIO driver v2.5, (c) 2001, 2002 Axis Communications AB\n");
+ /* We call etrax_gpio_wake_up_check() from timer interrupt and
+ * from cpu_idle() in kernel/process.c
+ * The check in cpu_idle() reduces latency from ~15 ms to ~6 ms
+ * in some tests.
+ */
+ if (request_irq(TIMER0_IRQ_NBR, gpio_poll_timer_interrupt,
+ SA_SHIRQ | SA_INTERRUPT,"gpio poll", NULL)) {
+ printk(KERN_CRIT "err: timer0 irq for gpio\n");
+ }
+ if (request_irq(PA_IRQ_NBR, gpio_pa_interrupt,
+ SA_SHIRQ | SA_INTERRUPT,"gpio PA", NULL)) {
+ printk(KERN_CRIT "err: PA irq for gpio\n");
+ }
+
+
+ return res;
+}
+
+/* this makes sure that gpio_init is called during kernel boot */
+
+module_init(gpio_init);
diff --git a/arch/cris/arch-v10/drivers/i2c.c b/arch/cris/arch-v10/drivers/i2c.c
new file mode 100644
index 00000000000..8bbe233ba7b
--- /dev/null
+++ b/arch/cris/arch-v10/drivers/i2c.c
@@ -0,0 +1,730 @@
+/*!***************************************************************************
+*!
+*! FILE NAME : i2c.c
+*!
+*! DESCRIPTION: implements an interface for IIC/I2C, both directly from other
+*! kernel modules (i2c_writereg/readreg) and from userspace using
+*! ioctl()'s
+*!
+*! Nov 30 1998 Torbjorn Eliasson Initial version.
+*! Bjorn Wesen Elinux kernel version.
+*! Jan 14 2000 Johan Adolfsson Fixed PB shadow register stuff -
+*! don't use PB_I2C if DS1302 uses same bits,
+*! use PB.
+*! $Log: i2c.c,v $
+*! Revision 1.9 2004/08/24 06:49:14 starvik
+*! Whitespace cleanup
+*!
+*! Revision 1.8 2004/06/08 08:48:26 starvik
+*! Removed unused code
+*!
+*! Revision 1.7 2004/05/28 09:26:59 starvik
+*! Modified I2C initialization to work in 2.6.
+*!
+*! Revision 1.6 2004/05/14 07:58:03 starvik
+*! Merge of changes from 2.4
+*!
+*! Revision 1.4 2002/12/11 13:13:57 starvik
+*! Added arch/ to v10 specific includes
+*! Added fix from Linux 2.4 in serial.c (flush_to_flip_buffer)
+*!
+*! Revision 1.3 2002/11/20 11:56:11 starvik
+*! Merge of Linux 2.5.48
+*!
+*! Revision 1.2 2002/11/18 13:16:06 starvik
+*! Linux 2.5 port of latest 2.4 drivers
+*!
+*! Revision 1.9 2002/10/31 15:32:26 starvik
+*! Update Port B register and shadow even when running with hardware support
+*! to avoid glitches when reading bits
+*! Never set direction to out in i2c_inbyte
+*! Removed incorrect clock togling at end of i2c_inbyte
+*!
+*! Revision 1.8 2002/08/13 06:31:53 starvik
+*! Made SDA and SCL line configurable
+*! Modified i2c_inbyte to work with PCF8563
+*!
+*! Revision 1.7 2001/04/04 13:11:36 markusl
+*! Updated according to review remarks
+*!
+*! Revision 1.6 2001/03/19 12:43:00 markusl
+*! Made some symbols unstatic (used by the eeprom driver)
+*!
+*! Revision 1.5 2001/02/27 13:52:48 bjornw
+*! malloc.h -> slab.h
+*!
+*! Revision 1.4 2001/02/15 07:17:40 starvik
+*! Corrected usage if port_pb_i2c_shadow
+*!
+*! Revision 1.3 2001/01/26 17:55:13 bjornw
+*! * Made I2C_USES_PB_NOT_PB_I2C a CONFIG option instead of assigning it
+*! magically. Config.in needs to set it for the options that need it, like
+*! Dallas 1302 support. Actually, it should be default since it screws up
+*! the PB bits even if you don't use I2C..
+*! * Include linux/config.h to get the above
+*!
+*! Revision 1.2 2001/01/18 15:49:30 bjornw
+*! 2.4 port of I2C including some cleanups (untested of course)
+*!
+*! Revision 1.1 2001/01/18 15:35:25 bjornw
+*! Verbatim copy of the Etrax i2c driver, 2.0 elinux version
+*!
+*!
+*! ---------------------------------------------------------------------------
+*!
+*! (C) Copyright 1999-2002 Axis Communications AB, LUND, SWEDEN
+*!
+*!***************************************************************************/
+/* $Id: i2c.c,v 1.9 2004/08/24 06:49:14 starvik Exp $ */
+
+/****************** INCLUDE FILES SECTION ***********************************/
+
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/config.h>
+
+#include <asm/etraxi2c.h>
+
+#include <asm/system.h>
+#include <asm/arch/svinto.h>
+#include <asm/io.h>
+#include <asm/delay.h>
+
+#include "i2c.h"
+
+/****************** I2C DEFINITION SECTION *************************/
+
+#define D(x)
+
+#define I2C_MAJOR 123 /* LOCAL/EXPERIMENTAL */
+static const char i2c_name[] = "i2c";
+
+#define CLOCK_LOW_TIME 8
+#define CLOCK_HIGH_TIME 8
+#define START_CONDITION_HOLD_TIME 8
+#define STOP_CONDITION_HOLD_TIME 8
+#define ENABLE_OUTPUT 0x01
+#define ENABLE_INPUT 0x00
+#define I2C_CLOCK_HIGH 1
+#define I2C_CLOCK_LOW 0
+#define I2C_DATA_HIGH 1
+#define I2C_DATA_LOW 0
+
+#ifdef CONFIG_ETRAX_I2C_USES_PB_NOT_PB_I2C
+/* Use PB and not PB_I2C */
+#ifndef CONFIG_ETRAX_I2C_DATA_PORT
+#define CONFIG_ETRAX_I2C_DATA_PORT 0
+#endif
+#ifndef CONFIG_ETRAX_I2C_CLK_PORT
+#define CONFIG_ETRAX_I2C_CLK_PORT 1
+#endif
+
+#define SDABIT CONFIG_ETRAX_I2C_DATA_PORT
+#define SCLBIT CONFIG_ETRAX_I2C_CLK_PORT
+#define i2c_enable()
+#define i2c_disable()
+
+/* enable or disable output-enable, to select output or input on the i2c bus */
+
+#define i2c_dir_out() \
+ REG_SHADOW_SET(R_PORT_PB_DIR, port_pb_dir_shadow, SDABIT, 1)
+#define i2c_dir_in() \
+ REG_SHADOW_SET(R_PORT_PB_DIR, port_pb_dir_shadow, SDABIT, 0)
+
+/* control the i2c clock and data signals */
+
+#define i2c_clk(x) \
+ REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, SCLBIT, x)
+#define i2c_data(x) \
+ REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, SDABIT, x)
+
+/* read a bit from the i2c interface */
+
+#define i2c_getbit() (((*R_PORT_PB_READ & (1 << SDABIT))) >> SDABIT)
+
+#else
+/* enable or disable the i2c interface */
+
+#define i2c_enable() *R_PORT_PB_I2C = (port_pb_i2c_shadow |= IO_MASK(R_PORT_PB_I2C, i2c_en))
+#define i2c_disable() *R_PORT_PB_I2C = (port_pb_i2c_shadow &= ~IO_MASK(R_PORT_PB_I2C, i2c_en))
+
+/* enable or disable output-enable, to select output or input on the i2c bus */
+
+#define i2c_dir_out() \
+ *R_PORT_PB_I2C = (port_pb_i2c_shadow &= ~IO_MASK(R_PORT_PB_I2C, i2c_oe_)); \
+ REG_SHADOW_SET(R_PORT_PB_DIR, port_pb_dir_shadow, 0, 1);
+#define i2c_dir_in() \
+ *R_PORT_PB_I2C = (port_pb_i2c_shadow |= IO_MASK(R_PORT_PB_I2C, i2c_oe_)); \
+ REG_SHADOW_SET(R_PORT_PB_DIR, port_pb_dir_shadow, 0, 0);
+
+/* control the i2c clock and data signals */
+
+#define i2c_clk(x) \
+ *R_PORT_PB_I2C = (port_pb_i2c_shadow = (port_pb_i2c_shadow & \
+ ~IO_MASK(R_PORT_PB_I2C, i2c_clk)) | IO_FIELD(R_PORT_PB_I2C, i2c_clk, (x))); \
+ REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, 1, x);
+
+#define i2c_data(x) \
+ *R_PORT_PB_I2C = (port_pb_i2c_shadow = (port_pb_i2c_shadow & \
+ ~IO_MASK(R_PORT_PB_I2C, i2c_d)) | IO_FIELD(R_PORT_PB_I2C, i2c_d, (x))); \
+ REG_SHADOW_SET(R_PORT_PB_DATA, port_pb_data_shadow, 0, x);
+
+/* read a bit from the i2c interface */
+
+#define i2c_getbit() (*R_PORT_PB_READ & 0x1)
+#endif
+
+/* use the kernels delay routine */
+
+#define i2c_delay(usecs) udelay(usecs)
+
+
+/****************** FUNCTION DEFINITION SECTION *************************/
+
+
+/* generate i2c start condition */
+
+void
+i2c_start(void)
+{
+ /*
+ * SCL=1 SDA=1
+ */
+ i2c_dir_out();
+ i2c_delay(CLOCK_HIGH_TIME/6);
+ i2c_data(I2C_DATA_HIGH);
+ i2c_clk(I2C_CLOCK_HIGH);
+ i2c_delay(CLOCK_HIGH_TIME);
+ /*
+ * SCL=1 SDA=0
+ */
+ i2c_data(I2C_DATA_LOW);
+ i2c_delay(START_CONDITION_HOLD_TIME);
+ /*
+ * SCL=0 SDA=0
+ */
+ i2c_clk(I2C_CLOCK_LOW);
+ i2c_delay(CLOCK_LOW_TIME);
+}
+
+/* generate i2c stop condition */
+
+void
+i2c_stop(void)
+{
+ i2c_dir_out();
+
+ /*
+ * SCL=0 SDA=0
+ */
+ i2c_clk(I2C_CLOCK_LOW);
+ i2c_data(I2C_DATA_LOW);
+ i2c_delay(CLOCK_LOW_TIME*2);
+ /*
+ * SCL=1 SDA=0
+ */
+ i2c_clk(I2C_CLOCK_HIGH);
+ i2c_delay(CLOCK_HIGH_TIME*2);
+ /*
+ * SCL=1 SDA=1
+ */
+ i2c_data(I2C_DATA_HIGH);
+ i2c_delay(STOP_CONDITION_HOLD_TIME);
+
+ i2c_dir_in();
+}
+
+/* write a byte to the i2c interface */
+
+void
+i2c_outbyte(unsigned char x)
+{
+ int i;
+
+ i2c_dir_out();
+
+ for (i = 0; i < 8; i++) {
+ if (x & 0x80) {
+ i2c_data(I2C_DATA_HIGH);
+ } else {
+ i2c_data(I2C_DATA_LOW);
+ }
+
+ i2c_delay(CLOCK_LOW_TIME/2);
+ i2c_clk(I2C_CLOCK_HIGH);
+ i2c_delay(CLOCK_HIGH_TIME);
+ i2c_clk(I2C_CLOCK_LOW);
+ i2c_delay(CLOCK_LOW_TIME/2);
+ x <<= 1;
+ }
+ i2c_data(I2C_DATA_LOW);
+ i2c_delay(CLOCK_LOW_TIME/2);
+
+ /*
+ * enable input
+ */
+ i2c_dir_in();
+}
+
+/* read a byte from the i2c interface */
+
+unsigned char
+i2c_inbyte(void)
+{
+ unsigned char aBitByte = 0;
+ int i;
+
+ /* Switch off I2C to get bit */
+ i2c_disable();
+ i2c_dir_in();
+ i2c_delay(CLOCK_HIGH_TIME/2);
+
+ /* Get bit */
+ aBitByte |= i2c_getbit();
+
+ /* Enable I2C */
+ i2c_enable();
+ i2c_delay(CLOCK_LOW_TIME/2);
+
+ for (i = 1; i < 8; i++) {
+ aBitByte <<= 1;
+ /* Clock pulse */
+ i2c_clk(I2C_CLOCK_HIGH);
+ i2c_delay(CLOCK_HIGH_TIME);
+ i2c_clk(I2C_CLOCK_LOW);
+ i2c_delay(CLOCK_LOW_TIME);
+
+ /* Switch off I2C to get bit */
+ i2c_disable();
+ i2c_dir_in();
+ i2c_delay(CLOCK_HIGH_TIME/2);
+
+ /* Get bit */
+ aBitByte |= i2c_getbit();
+
+ /* Enable I2C */
+ i2c_enable();
+ i2c_delay(CLOCK_LOW_TIME/2);
+ }
+ i2c_clk(I2C_CLOCK_HIGH);
+ i2c_delay(CLOCK_HIGH_TIME);
+
+ /*
+ * we leave the clock low, getbyte is usually followed
+ * by sendack/nack, they assume the clock to be low
+ */
+ i2c_clk(I2C_CLOCK_LOW);
+ return aBitByte;
+}
+
+/*#---------------------------------------------------------------------------
+*#
+*# FUNCTION NAME: i2c_getack
+*#
+*# DESCRIPTION : checks if ack was received from ic2
+*#
+*#--------------------------------------------------------------------------*/
+
+int
+i2c_getack(void)
+{
+ int ack = 1;
+ /*
+ * enable output
+ */
+ i2c_dir_out();
+ /*
+ * Release data bus by setting
+ * data high
+ */
+ i2c_data(I2C_DATA_HIGH);
+ /*
+ * enable input
+ */
+ i2c_dir_in();
+ i2c_delay(CLOCK_HIGH_TIME/4);
+ /*
+ * generate ACK clock pulse
+ */
+ i2c_clk(I2C_CLOCK_HIGH);
+ /*
+ * Use PORT PB instead of I2C
+ * for input. (I2C not working)
+ */
+ i2c_clk(1);
+ i2c_data(1);
+ /*
+ * switch off I2C
+ */
+ i2c_data(1);
+ i2c_disable();
+ i2c_dir_in();
+ /*
+ * now wait for ack
+ */
+ i2c_delay(CLOCK_HIGH_TIME/2);
+ /*
+ * check for ack
+ */
+ if(i2c_getbit())
+ ack = 0;
+ i2c_delay(CLOCK_HIGH_TIME/2);
+ if(!ack){
+ if(!i2c_getbit()) /* receiver pulld SDA low */
+ ack = 1;
+ i2c_delay(CLOCK_HIGH_TIME/2);
+ }
+
+ /*
+ * our clock is high now, make sure data is low
+ * before we enable our output. If we keep data high
+ * and enable output, we would generate a stop condition.
+ */
+ i2c_data(I2C_DATA_LOW);
+
+ /*
+ * end clock pulse
+ */
+ i2c_enable();
+ i2c_dir_out();
+ i2c_clk(I2C_CLOCK_LOW);
+ i2c_delay(CLOCK_HIGH_TIME/4);
+ /*
+ * enable output
+ */
+ i2c_dir_out();
+ /*
+ * remove ACK clock pulse
+ */
+ i2c_data(I2C_DATA_HIGH);
+ i2c_delay(CLOCK_LOW_TIME/2);
+ return ack;
+}
+
+/*#---------------------------------------------------------------------------
+*#
+*# FUNCTION NAME: I2C::sendAck
+*#
+*# DESCRIPTION : Send ACK on received data
+*#
+*#--------------------------------------------------------------------------*/
+void
+i2c_sendack(void)
+{
+ /*
+ * enable output
+ */
+ i2c_delay(CLOCK_LOW_TIME);
+ i2c_dir_out();
+ /*
+ * set ack pulse high
+ */
+ i2c_data(I2C_DATA_LOW);
+ /*
+ * generate clock pulse
+ */
+ i2c_delay(CLOCK_HIGH_TIME/6);
+ i2c_clk(I2C_CLOCK_HIGH);
+ i2c_delay(CLOCK_HIGH_TIME);
+ i2c_clk(I2C_CLOCK_LOW);
+ i2c_delay(CLOCK_LOW_TIME/6);
+ /*
+ * reset data out
+ */
+ i2c_data(I2C_DATA_HIGH);
+ i2c_delay(CLOCK_LOW_TIME);
+
+ i2c_dir_in();
+}
+
+/*#---------------------------------------------------------------------------
+*#
+*# FUNCTION NAME: i2c_sendnack
+*#
+*# DESCRIPTION : Sends NACK on received data
+*#
+*#--------------------------------------------------------------------------*/
+void
+i2c_sendnack(void)
+{
+ /*
+ * enable output
+ */
+ i2c_delay(CLOCK_LOW_TIME);
+ i2c_dir_out();
+ /*
+ * set data high
+ */
+ i2c_data(I2C_DATA_HIGH);
+ /*
+ * generate clock pulse
+ */
+ i2c_delay(CLOCK_HIGH_TIME/6);
+ i2c_clk(I2C_CLOCK_HIGH);
+ i2c_delay(CLOCK_HIGH_TIME);
+ i2c_clk(I2C_CLOCK_LOW);
+ i2c_delay(CLOCK_LOW_TIME);
+
+ i2c_dir_in();
+}
+
+/*#---------------------------------------------------------------------------
+*#
+*# FUNCTION NAME: i2c_writereg
+*#
+*# DESCRIPTION : Writes a value to an I2C device
+*#
+*#--------------------------------------------------------------------------*/
+int
+i2c_writereg(unsigned char theSlave, unsigned char theReg,
+ unsigned char theValue)
+{
+ int error, cntr = 3;
+ unsigned long flags;
+
+ do {
+ error = 0;
+ /*
+ * we don't like to be interrupted
+ */
+ local_irq_save(flags);
+ local_irq_disable();
+
+ i2c_start();
+ /*
+ * send slave address
+ */
+ i2c_outbyte((theSlave & 0xfe));
+ /*
+ * wait for ack
+ */
+ if(!i2c_getack())
+ error = 1;
+ /*
+ * now select register
+ */
+ i2c_dir_out();
+ i2c_outbyte(theReg);
+ /*
+ * now it's time to wait for ack
+ */
+ if(!i2c_getack())
+ error |= 2;
+ /*
+ * send register register data
+ */
+ i2c_outbyte(theValue);
+ /*
+ * now it's time to wait for ack
+ */
+ if(!i2c_getack())
+ error |= 4;
+ /*
+ * end byte stream
+ */
+ i2c_stop();
+ /*
+ * enable interrupt again
+ */
+ local_irq_restore(flags);
+
+ } while(error && cntr--);
+
+ i2c_delay(CLOCK_LOW_TIME);
+
+ return -error;
+}
+
+/*#---------------------------------------------------------------------------
+*#
+*# FUNCTION NAME: i2c_readreg
+*#
+*# DESCRIPTION : Reads a value from the decoder registers.
+*#
+*#--------------------------------------------------------------------------*/
+unsigned char
+i2c_readreg(unsigned char theSlave, unsigned char theReg)
+{
+ unsigned char b = 0;
+ int error, cntr = 3;
+ unsigned long flags;
+
+ do {
+ error = 0;
+ /*
+ * we don't like to be interrupted
+ */
+ local_irq_save(flags);
+ local_irq_disable();
+ /*
+ * generate start condition
+ */
+ i2c_start();
+
+ /*
+ * send slave address
+ */
+ i2c_outbyte((theSlave & 0xfe));
+ /*
+ * wait for ack
+ */
+ if(!i2c_getack())
+ error = 1;
+ /*
+ * now select register
+ */
+ i2c_dir_out();
+ i2c_outbyte(theReg);
+ /*
+ * now it's time to wait for ack
+ */
+ if(!i2c_getack())
+ error = 1;
+ /*
+ * repeat start condition
+ */
+ i2c_delay(CLOCK_LOW_TIME);
+ i2c_start();
+ /*
+ * send slave address
+ */
+ i2c_outbyte(theSlave | 0x01);
+ /*
+ * wait for ack
+ */
+ if(!i2c_getack())
+ error = 1;
+ /*
+ * fetch register
+ */
+ b = i2c_inbyte();
+ /*
+ * last received byte needs to be nacked
+ * instead of acked
+ */
+ i2c_sendack();
+ /*
+ * end sequence
+ */
+ i2c_stop();
+ /*
+ * enable interrupt again
+ */
+ local_irq_restore(flags);
+
+ } while(error && cntr--);
+
+ return b;
+}
+
+static int
+i2c_open(struct inode *inode, struct file *filp)
+{
+ return 0;
+}
+
+static int
+i2c_release(struct inode *inode, struct file *filp)
+{
+ return 0;
+}
+
+/* Main device API. ioctl's to write or read to/from i2c registers.
+ */
+
+static int
+i2c_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ if(_IOC_TYPE(cmd) != ETRAXI2C_IOCTYPE) {
+ return -EINVAL;
+ }
+
+ switch (_IOC_NR(cmd)) {
+ case I2C_WRITEREG:
+ /* write to an i2c slave */
+ D(printk("i2cw %d %d %d\n",
+ I2C_ARGSLAVE(arg),
+ I2C_ARGREG(arg),
+ I2C_ARGVALUE(arg)));
+
+ return i2c_writereg(I2C_ARGSLAVE(arg),
+ I2C_ARGREG(arg),
+ I2C_ARGVALUE(arg));
+ case I2C_READREG:
+ {
+ unsigned char val;
+ /* read from an i2c slave */
+ D(printk("i2cr %d %d ",
+ I2C_ARGSLAVE(arg),
+ I2C_ARGREG(arg)));
+ val = i2c_readreg(I2C_ARGSLAVE(arg), I2C_ARGREG(arg));
+ D(printk("= %d\n", val));
+ return val;
+ }
+ default:
+ return -EINVAL;
+
+ }
+
+ return 0;
+}
+
+static struct file_operations i2c_fops = {
+ .owner = THIS_MODULE,
+ .ioctl = i2c_ioctl,
+ .open = i2c_open,
+ .release = i2c_release,
+};
+
+int __init
+i2c_init(void)
+{
+ /* Setup and enable the Port B I2C interface */
+
+#ifndef CONFIG_ETRAX_I2C_USES_PB_NOT_PB_I2C
+ *R_PORT_PB_I2C = port_pb_i2c_shadow |=
+ IO_STATE(R_PORT_PB_I2C, i2c_en, on) |
+ IO_FIELD(R_PORT_PB_I2C, i2c_d, 1) |
+ IO_FIELD(R_PORT_PB_I2C, i2c_clk, 1) |
+ IO_STATE(R_PORT_PB_I2C, i2c_oe_, enable);
+#endif
+
+ port_pb_dir_shadow &= ~IO_MASK(R_PORT_PB_DIR, dir0);
+ port_pb_dir_shadow &= ~IO_MASK(R_PORT_PB_DIR, dir1);
+
+ *R_PORT_PB_DIR = (port_pb_dir_shadow |=
+ IO_STATE(R_PORT_PB_DIR, dir0, input) |
+ IO_STATE(R_PORT_PB_DIR, dir1, output));
+
+ return 0;
+}
+
+static int __init
+i2c_register(void)
+{
+ int res;
+
+ i2c_init();
+ res = register_chrdev(I2C_MAJOR, i2c_name, &i2c_fops);
+ if(res < 0) {
+ printk(KERN_ERR "i2c: couldn't get a major number.\n");
+ return res;
+ }
+
+ printk(KERN_INFO "I2C driver v2.2, (c) 1999-2001 Axis Communications AB\n");
+
+ return 0;
+}
+
+/* this makes sure that i2c_register is called during boot */
+
+module_init(i2c_register);
+
+/****************** END OF FILE i2c.c ********************************/
diff --git a/arch/cris/arch-v10/drivers/i2c.h b/arch/cris/arch-v10/drivers/i2c.h
new file mode 100644
index 00000000000..4ee91426bd4
--- /dev/null
+++ b/arch/cris/arch-v10/drivers/i2c.h
@@ -0,0 +1,18 @@
+/* $Id: i2c.h,v 1.3 2004/05/28 09:26:59 starvik Exp $ */
+
+int i2c_init(void);
+
+/* High level I2C actions */
+int i2c_writereg(unsigned char theSlave, unsigned char theReg, unsigned char theValue);
+unsigned char i2c_readreg(unsigned char theSlave, unsigned char theReg);
+
+/* Low level I2C */
+void i2c_start(void);
+void i2c_stop(void);
+void i2c_outbyte(unsigned char x);
+unsigned char i2c_inbyte(void);
+int i2c_getack(void);
+void i2c_sendack(void);
+
+
+
diff --git a/arch/cris/arch-v10/drivers/pcf8563.c b/arch/cris/arch-v10/drivers/pcf8563.c
new file mode 100644
index 00000000000..b3dfdf7b8fc
--- /dev/null
+++ b/arch/cris/arch-v10/drivers/pcf8563.c
@@ -0,0 +1,313 @@
+/*
+ * PCF8563 RTC
+ *
+ * From Phillips' datasheet:
+ *
+ * The PCF8563 is a CMOS real-time clock/calendar optimized for low power
+ * consumption. A programmable clock output, interupt output and voltage
+ * low detector are also provided. All address and data are transferred
+ * serially via two-line bidirectional I2C-bus. Maximum bus speed is
+ * 400 kbits/s. The built-in word address register is incremented
+ * automatically after each written or read bute.
+ *
+ * Copyright (c) 2002, Axis Communications AB
+ * All rights reserved.
+ *
+ * Author: Tobias Anderberg <tobiasa@axis.com>.
+ *
+ * $Id: pcf8563.c,v 1.8 2004/08/24 06:42:51 starvik Exp $
+ */
+
+#include <linux/config.h>
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/ioctl.h>
+#include <linux/delay.h>
+#include <linux/bcd.h>
+
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/arch/svinto.h>
+#include <asm/rtc.h>
+#include "i2c.h"
+
+#define PCF8563_MAJOR 121 /* Local major number. */
+#define DEVICE_NAME "rtc" /* Name which is registered in /proc/devices. */
+#define PCF8563_NAME "PCF8563"
+#define DRIVER_VERSION "$Revision: 1.8 $"
+
+/* I2C bus slave registers. */
+#define RTC_I2C_READ 0xa3
+#define RTC_I2C_WRITE 0xa2
+
+/* Two simple wrapper macros, saves a few keystrokes. */
+#define rtc_read(x) i2c_readreg(RTC_I2C_READ, x)
+#define rtc_write(x,y) i2c_writereg(RTC_I2C_WRITE, x, y)
+
+static const unsigned char days_in_month[] =
+ { 0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 };
+
+int pcf8563_ioctl(struct inode *, struct file *, unsigned int, unsigned long);
+
+static struct file_operations pcf8563_fops = {
+ .owner = THIS_MODULE,
+ .ioctl = pcf8563_ioctl,
+};
+
+unsigned char
+pcf8563_readreg(int reg)
+{
+ unsigned char res = i2c_readreg(RTC_I2C_READ, reg);
+
+ /* The PCF8563 does not return 0 for unimplemented bits */
+ switch(reg)
+ {
+ case RTC_SECONDS:
+ case RTC_MINUTES:
+ res &= 0x7f;
+ break;
+ case RTC_HOURS:
+ case RTC_DAY_OF_MONTH:
+ res &= 0x3f;
+ break;
+ case RTC_MONTH:
+ res = (res & 0x1f) - 1; /* PCF8563 returns month in range 1-12 */
+ break;
+ }
+ return res;
+}
+
+void
+pcf8563_writereg(int reg, unsigned char val)
+{
+#ifdef CONFIG_ETRAX_RTC_READONLY
+ if (reg == RTC_CONTROL1 || (reg >= RTC_SECONDS && reg <= RTC_YEAR))
+ return;
+#endif
+
+ rtc_write(reg, val);
+}
+
+void
+get_rtc_time(struct rtc_time *tm)
+{
+ tm->tm_sec = rtc_read(RTC_SECONDS);
+ tm->tm_min = rtc_read(RTC_MINUTES);
+ tm->tm_hour = rtc_read(RTC_HOURS);
+ tm->tm_mday = rtc_read(RTC_DAY_OF_MONTH);
+ tm->tm_mon = rtc_read(RTC_MONTH);
+ tm->tm_year = rtc_read(RTC_YEAR);
+
+ if (tm->tm_sec & 0x80)
+ printk(KERN_WARNING "%s: RTC Low Voltage - date/time is not reliable!\n", PCF8563_NAME);
+
+ tm->tm_year = BCD_TO_BIN(tm->tm_year) + ((tm->tm_mon & 0x80) ? 100 : 0);
+ tm->tm_sec &= 0x7f;
+ tm->tm_min &= 0x7f;
+ tm->tm_hour &= 0x3f;
+ tm->tm_mday &= 0x3f;
+ tm->tm_mon &= 0x1f;
+
+ BCD_TO_BIN(tm->tm_sec);
+ BCD_TO_BIN(tm->tm_min);
+ BCD_TO_BIN(tm->tm_hour);
+ BCD_TO_BIN(tm->tm_mday);
+ BCD_TO_BIN(tm->tm_mon);
+ tm->tm_mon--; /* Month is 1..12 in RTC but 0..11 in linux */
+}
+
+int __init
+pcf8563_init(void)
+{
+ unsigned char ret;
+
+ i2c_init();
+
+ /*
+ * First of all we need to reset the chip. This is done by
+ * clearing control1, control2 and clk freq, clear the
+ * Voltage Low bit, and resetting all alarms.
+ */
+ if (rtc_write(RTC_CONTROL1, 0x00) < 0)
+ goto err;
+
+ if (rtc_write(RTC_CONTROL2, 0x00) < 0)
+ goto err;
+
+ if (rtc_write(RTC_CLOCKOUT_FREQ, 0x00) < 0)
+ goto err;
+
+ /* Clear the VL bit in the seconds register. */
+ ret = rtc_read(RTC_SECONDS);
+
+ if (rtc_write(RTC_SECONDS, (ret & 0x7f)) < 0)
+ goto err;
+
+ /* Reset the alarms. */
+ if (rtc_write(RTC_MINUTE_ALARM, 0x00) < 0)
+ goto err;
+
+ if (rtc_write(RTC_HOUR_ALARM, 0x00) < 0)
+ goto err;
+
+ if (rtc_write(RTC_DAY_ALARM, 0x00) < 0)
+ goto err;
+
+ if (rtc_write(RTC_WEEKDAY_ALARM, 0x00) < 0)
+ goto err;
+
+ /* Check for low voltage, and warn about it.. */
+ if (rtc_read(RTC_SECONDS) & 0x80)
+ printk(KERN_WARNING "%s: RTC Low Voltage - date/time is not reliable!\n", PCF8563_NAME);
+
+ return 0;
+
+err:
+ printk(KERN_INFO "%s: Error initializing chip.\n", PCF8563_NAME);
+ return -1;
+}
+
+void __exit
+pcf8563_exit(void)
+{
+ if (unregister_chrdev(PCF8563_MAJOR, DEVICE_NAME) < 0) {
+ printk(KERN_INFO "%s: Unable to unregister device.\n", PCF8563_NAME);
+ }
+}
+
+/*
+ * ioctl calls for this driver. Why return -ENOTTY upon error? Because
+ * POSIX says so!
+ */
+int
+pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned long arg)
+{
+ /* Some sanity checks. */
+ if (_IOC_TYPE(cmd) != RTC_MAGIC)
+ return -ENOTTY;
+
+ if (_IOC_NR(cmd) > RTC_MAX_IOCTL)
+ return -ENOTTY;
+
+ switch (cmd) {
+ case RTC_RD_TIME:
+ {
+ struct rtc_time tm;
+
+ get_rtc_time(&tm);
+
+ if (copy_to_user((struct rtc_time *) arg, &tm, sizeof(struct rtc_time))) {
+ return -EFAULT;
+ }
+
+ return 0;
+ }
+ break;
+ case RTC_SET_TIME:
+ {
+#ifdef CONFIG_ETRAX_RTC_READONLY
+ return -EPERM;
+#else
+ int leap;
+ int century;
+ struct rtc_time tm;
+
+ memset(&tm, 0, sizeof (struct rtc_time));
+ if (!capable(CAP_SYS_TIME))
+ return -EPERM;
+
+ if (copy_from_user(&tm, (struct rtc_time *) arg, sizeof(struct rtc_time)))
+ return -EFAULT;
+
+ /* Convert from struct tm to struct rtc_time. */
+ tm.tm_year += 1900;
+ tm.tm_mon += 1;
+
+ leap = ((tm.tm_mon == 2) && ((tm.tm_year % 4) == 0)) ? 1 : 0;
+
+ /* Perform some sanity checks. */
+ if ((tm.tm_year < 1970) ||
+ (tm.tm_mon > 12) ||
+ (tm.tm_mday == 0) ||
+ (tm.tm_mday > days_in_month[tm.tm_mon] + leap) ||
+ (tm.tm_hour >= 24) ||
+ (tm.tm_min >= 60) ||
+ (tm.tm_sec >= 60))
+ return -EINVAL;
+
+ century = (tm.tm_year >= 2000) ? 0x80 : 0;
+ tm.tm_year = tm.tm_year % 100;
+
+ BIN_TO_BCD(tm.tm_year);
+ BIN_TO_BCD(tm.tm_mday);
+ BIN_TO_BCD(tm.tm_hour);
+ BIN_TO_BCD(tm.tm_min);
+ BIN_TO_BCD(tm.tm_sec);
+ tm.tm_mon |= century;
+
+ rtc_write(RTC_YEAR, tm.tm_year);
+ rtc_write(RTC_MONTH, tm.tm_mon);
+ rtc_write(RTC_DAY_OF_MONTH, tm.tm_mday);
+ rtc_write(RTC_HOURS, tm.tm_hour);
+ rtc_write(RTC_MINUTES, tm.tm_min);
+ rtc_write(RTC_SECONDS, tm.tm_sec);
+
+ return 0;
+#endif /* !CONFIG_ETRAX_RTC_READONLY */
+ }
+
+ case RTC_VLOW_RD:
+ {
+ int vl_bit = 0;
+
+ if (rtc_read(RTC_SECONDS) & 0x80) {
+ vl_bit = 1;
+ printk(KERN_WARNING "%s: RTC Voltage Low - reliable "
+ "date/time information is no longer guaranteed!\n",
+ PCF8563_NAME);
+ }
+ if (copy_to_user((int *) arg, &vl_bit, sizeof(int)))
+ return -EFAULT;
+
+ return 0;
+ }
+
+ case RTC_VLOW_SET:
+ {
+ /* Clear the VL bit in the seconds register */
+ int ret = rtc_read(RTC_SECONDS);
+
+ rtc_write(RTC_SECONDS, (ret & 0x7F));
+
+ return 0;
+ }
+
+ default:
+ return -ENOTTY;
+ }
+
+ return 0;
+}
+
+static int __init
+pcf8563_register(void)
+{
+ pcf8563_init();
+ if (register_chrdev(PCF8563_MAJOR, DEVICE_NAME, &pcf8563_fops) < 0) {
+ printk(KERN_INFO "%s: Unable to get major numer %d for RTC device.\n",
+ PCF8563_NAME, PCF8563_MAJOR);
+ return -1;
+ }
+
+ printk(KERN_INFO "%s Real-Time Clock Driver, %s\n", PCF8563_NAME, DRIVER_VERSION);
+ return 0;
+}
+
+module_init(pcf8563_register);
+module_exit(pcf8563_exit);
diff --git a/arch/cris/arch-v10/kernel/Makefile b/arch/cris/arch-v10/kernel/Makefile
new file mode 100644
index 00000000000..52761603b6a
--- /dev/null
+++ b/arch/cris/arch-v10/kernel/Makefile
@@ -0,0 +1,17 @@
+# $Id: Makefile,v 1.5 2004/06/02 08:24:38 starvik Exp $
+#
+# Makefile for the linux kernel.
+#
+
+extra-y := head.o
+
+
+obj-y := entry.o traps.o shadows.o debugport.o irq.o \
+ process.o setup.o signal.o traps.o time.o ptrace.o
+
+obj-$(CONFIG_ETRAX_KGDB) += kgdb.o
+obj-$(CONFIG_ETRAX_FAST_TIMER) += fasttimer.o
+obj-$(CONFIG_MODULES) += crisksyms.o
+
+clean:
+
diff --git a/arch/cris/arch-v10/kernel/asm-offsets.c b/arch/cris/arch-v10/kernel/asm-offsets.c
new file mode 100644
index 00000000000..1aa3cc4e710
--- /dev/null
+++ b/arch/cris/arch-v10/kernel/asm-offsets.c
@@ -0,0 +1,47 @@
+#include <linux/sched.h>
+#include <asm/thread_info.h>
+
+/*
+ * Generate definitions needed by assembly language modules.
+ * This code generates raw asm output which is post-processed to extract
+ * and format the required data.
+ */
+
+#define DEFINE(sym, val) \
+ asm volatile("\n->" #sym " %0 " #val : : "i" (val))
+
+#define BLANK() asm volatile("\n->" : : )
+
+int main(void)
+{
+#define ENTRY(entry) DEFINE(PT_ ## entry, offsetof(struct pt_regs, entry))
+ ENTRY(orig_r10);
+ ENTRY(r13);
+ ENTRY(r12);
+ ENTRY(r11);
+ ENTRY(r10);
+ ENTRY(r9);
+ ENTRY(mof);
+ ENTRY(dccr);
+ ENTRY(srp);
+ BLANK();
+#undef ENTRY
+#define ENTRY(entry) DEFINE(TI_ ## entry, offsetof(struct thread_info, entry))
+ ENTRY(task);
+ ENTRY(flags);
+ ENTRY(preempt_count);
+ BLANK();
+#undef ENTRY
+#define ENTRY(entry) DEFINE(THREAD_ ## entry, offsetof(struct thread_struct, entry))
+ ENTRY(ksp);
+ ENTRY(usp);
+ ENTRY(dccr);
+ BLANK();
+#undef ENTRY
+#define ENTRY(entry) DEFINE(TASK_ ## entry, offsetof(struct task_struct, entry))
+ ENTRY(pid);
+ BLANK();
+ DEFINE(LCLONE_VM, CLONE_VM);
+ DEFINE(LCLONE_UNTRACED, CLONE_UNTRACED);
+ return 0;
+}
diff --git a/arch/cris/arch-v10/kernel/crisksyms.c b/arch/cris/arch-v10/kernel/crisksyms.c
new file mode 100644
index 00000000000..b332bf9b312
--- /dev/null
+++ b/arch/cris/arch-v10/kernel/crisksyms.c
@@ -0,0 +1,17 @@
+#include <linux/config.h>
+#include <linux/module.h>
+#include <asm/io.h>
+#include <asm/arch/svinto.h>
+
+/* Export shadow registers for the CPU I/O pins */
+EXPORT_SYMBOL(genconfig_shadow);
+EXPORT_SYMBOL(port_pa_data_shadow);
+EXPORT_SYMBOL(port_pa_dir_shadow);
+EXPORT_SYMBOL(port_pb_data_shadow);
+EXPORT_SYMBOL(port_pb_dir_shadow);
+EXPORT_SYMBOL(port_pb_config_shadow);
+EXPORT_SYMBOL(port_g_data_shadow);
+
+/* Cache flush functions */
+EXPORT_SYMBOL(flush_etrax_cache);
+EXPORT_SYMBOL(prepare_rx_descriptor);
diff --git a/arch/cris/arch-v10/kernel/debugport.c b/arch/cris/arch-v10/kernel/debugport.c
new file mode 100644
index 00000000000..6cf069e5e7b
--- /dev/null
+++ b/arch/cris/arch-v10/kernel/debugport.c
@@ -0,0 +1,531 @@
+/* Serialport functions for debugging
+ *
+ * Copyright (c) 2000 Axis Communications AB
+ *
+ * Authors: Bjorn Wesen
+ *
+ * Exports:
+ * console_print_etrax(char *buf)
+ * int getDebugChar()
+ * putDebugChar(int)
+ * enableDebugIRQ()
+ * init_etrax_debug()
+ *
+ * $Log: debugport.c,v $
+ * Revision 1.19 2004/10/21 07:26:16 starvik
+ * Made it possible to specify console settings on kernel command line.
+ *
+ * Revision 1.18 2004/10/19 13:07:37 starvik
+ * Merge of Linux 2.6.9
+ *
+ * Revision 1.17 2004/09/29 10:33:46 starvik
+ * Resolved a dealock when printing debug from kernel.
+ *
+ * Revision 1.16 2004/08/24 06:12:19 starvik
+ * Whitespace cleanup
+ *
+ * Revision 1.15 2004/08/16 12:37:19 starvik
+ * Merge of Linux 2.6.8
+ *
+ * Revision 1.14 2004/05/17 13:11:29 starvik
+ * Disable DMA until real serial driver is up
+ *
+ * Revision 1.13 2004/05/14 07:58:01 starvik
+ * Merge of changes from 2.4
+ *
+ * Revision 1.12 2003/09/11 07:29:49 starvik
+ * Merge of Linux 2.6.0-test5
+ *
+ * Revision 1.11 2003/07/07 09:53:36 starvik
+ * Revert all the 2.5.74 merge changes to make the console work again
+ *
+ * Revision 1.9 2003/02/17 17:07:23 starvik
+ * Solved the problem with corrupted debug output (from Linux 2.4)
+ * * Wait until DMA, FIFO and pipe is empty before and after transmissions
+ * * Buffer data until a FIFO flush can be triggered.
+ *
+ * Revision 1.8 2003/01/22 06:48:36 starvik
+ * Fixed warnings issued by GCC 3.2.1
+ *
+ * Revision 1.7 2002/12/12 08:26:32 starvik
+ * Don't use C-comments inside CVS comments
+ *
+ * Revision 1.6 2002/12/11 15:42:02 starvik
+ * Extracted v10 (ETRAX 100LX) specific stuff from arch/cris/kernel/
+ *
+ * Revision 1.5 2002/11/20 06:58:03 starvik
+ * Compiles with kgdb
+ *
+ * Revision 1.4 2002/11/19 14:35:24 starvik
+ * Changes from linux 2.4
+ * Changed struct initializer syntax to the currently prefered notation
+ *
+ * Revision 1.3 2002/11/06 09:47:03 starvik
+ * Modified for new interrupt macros
+ *
+ * Revision 1.2 2002/01/21 15:21:50 bjornw
+ * Update for kdev_t changes
+ *
+ * Revision 1.6 2001/04/17 13:58:39 orjanf
+ * * Renamed CONFIG_KGDB to CONFIG_ETRAX_KGDB.
+ *
+ * Revision 1.5 2001/03/26 14:22:05 bjornw
+ * Namechange of some config options
+ *
+ * Revision 1.4 2000/10/06 12:37:26 bjornw
+ * Use physical addresses when talking to DMA
+ *
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/major.h>
+#include <linux/delay.h>
+#include <linux/tty.h>
+#include <asm/system.h>
+#include <asm/arch/svinto.h>
+#include <asm/io.h> /* Get SIMCOUT. */
+
+struct dbg_port
+{
+ unsigned int index;
+ const volatile unsigned* read;
+ volatile char* write;
+ volatile unsigned* xoff;
+ volatile char* baud;
+ volatile char* tr_ctrl;
+ volatile char* rec_ctrl;
+ unsigned long irq;
+ unsigned int started;
+ unsigned long baudrate;
+ unsigned char parity;
+ unsigned int bits;
+};
+
+struct dbg_port ports[]=
+{
+ {
+ 0,
+ R_SERIAL0_READ,
+ R_SERIAL0_TR_DATA,
+ R_SERIAL0_XOFF,
+ R_SERIAL0_BAUD,
+ R_SERIAL0_TR_CTRL,
+ R_SERIAL0_REC_CTRL,
+ IO_STATE(R_IRQ_MASK1_SET, ser0_data, set)
+ },
+ {
+ 1,
+ R_SERIAL1_READ,
+ R_SERIAL1_TR_DATA,
+ R_SERIAL1_XOFF,
+ R_SERIAL1_BAUD,
+ R_SERIAL1_TR_CTRL,
+ R_SERIAL1_REC_CTRL,
+ IO_STATE(R_IRQ_MASK1_SET, ser1_data, set)
+ },
+ {
+ 2,
+ R_SERIAL2_READ,
+ R_SERIAL2_TR_DATA,
+ R_SERIAL2_XOFF,
+ R_SERIAL2_BAUD,
+ R_SERIAL2_TR_CTRL,
+ R_SERIAL2_REC_CTRL,
+ IO_STATE(R_IRQ_MASK1_SET, ser2_data, set)
+ },
+ {
+ 3,
+ R_SERIAL3_READ,
+ R_SERIAL3_TR_DATA,
+ R_SERIAL3_XOFF,
+ R_SERIAL3_BAUD,
+ R_SERIAL3_TR_CTRL,
+ R_SERIAL3_REC_CTRL,
+ IO_STATE(R_IRQ_MASK1_SET, ser3_data, set)
+ }
+};
+
+static struct tty_driver *serial_driver;
+
+struct dbg_port* port =
+#if defined(CONFIG_ETRAX_DEBUG_PORT0)
+ &ports[0];
+#elif defined(CONFIG_ETRAX_DEBUG_PORT1)
+ &ports[1];
+#elif defined(CONFIG_ETRAX_DEBUG_PORT2)
+ &ports[2];
+#elif defined(CONFIG_ETRAX_DEBUG_PORT3)
+ &ports[3];
+#else
+ NULL;
+#endif
+/* Used by serial.c to register a debug_write_function so that the normal
+ * serial driver is used for kernel debug output
+ */
+typedef int (*debugport_write_function)(int i, const char *buf, unsigned int len);
+
+debugport_write_function debug_write_function = NULL;
+
+static void
+start_port(void)
+{
+ unsigned long rec_ctrl = 0;
+ unsigned long tr_ctrl = 0;
+
+ if (!port)
+ return;
+
+ if (port->started)
+ return;
+ port->started = 1;
+
+ if (port->index == 0)
+ {
+ genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma6);
+ genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma6, unused);
+ }
+ else if (port->index == 1)
+ {
+ genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma8);
+ genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma8, usb);
+ }
+ else if (port->index == 2)
+ {
+ genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma2);
+ genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma2, par0);
+ genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma3);
+ genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma3, par0);
+ genconfig_shadow |= IO_STATE(R_GEN_CONFIG, ser2, select);
+ }
+ else
+ {
+ genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma4);
+ genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma4, par1);
+ genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma5);
+ genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma5, par1);
+ genconfig_shadow |= IO_STATE(R_GEN_CONFIG, ser3, select);
+ }
+
+ *R_GEN_CONFIG = genconfig_shadow;
+
+ *port->xoff =
+ IO_STATE(R_SERIAL0_XOFF, tx_stop, enable) |
+ IO_STATE(R_SERIAL0_XOFF, auto_xoff, disable) |
+ IO_FIELD(R_SERIAL0_XOFF, xoff_char, 0);
+
+ switch (port->baudrate)
+ {
+ case 0:
+ case 115200:
+ *port->baud =
+ IO_STATE(R_SERIAL0_BAUD, tr_baud, c115k2Hz) |
+ IO_STATE(R_SERIAL0_BAUD, rec_baud, c115k2Hz);
+ break;
+ case 1200:
+ *port->baud =
+ IO_STATE(R_SERIAL0_BAUD, tr_baud, c1200Hz) |
+ IO_STATE(R_SERIAL0_BAUD, rec_baud, c1200Hz);
+ break;
+ case 2400:
+ *port->baud =
+ IO_STATE(R_SERIAL0_BAUD, tr_baud, c2400Hz) |
+ IO_STATE(R_SERIAL0_BAUD, rec_baud, c2400Hz);
+ break;
+ case 4800:
+ *port->baud =
+ IO_STATE(R_SERIAL0_BAUD, tr_baud, c4800Hz) |
+ IO_STATE(R_SERIAL0_BAUD, rec_baud, c4800Hz);
+ break;
+ case 9600:
+ *port->baud =
+ IO_STATE(R_SERIAL0_BAUD, tr_baud, c9600Hz) |
+ IO_STATE(R_SERIAL0_BAUD, rec_baud, c9600Hz);
+ break;
+ case 19200:
+ *port->baud =
+ IO_STATE(R_SERIAL0_BAUD, tr_baud, c19k2Hz) |
+ IO_STATE(R_SERIAL0_BAUD, rec_baud, c19k2Hz);
+ break;
+ case 38400:
+ *port->baud =
+ IO_STATE(R_SERIAL0_BAUD, tr_baud, c38k4Hz) |
+ IO_STATE(R_SERIAL0_BAUD, rec_baud, c38k4Hz);
+ break;
+ case 57600:
+ *port->baud =
+ IO_STATE(R_SERIAL0_BAUD, tr_baud, c57k6Hz) |
+ IO_STATE(R_SERIAL0_BAUD, rec_baud, c57k6Hz);
+ break;
+ default:
+ *port->baud =
+ IO_STATE(R_SERIAL0_BAUD, tr_baud, c115k2Hz) |
+ IO_STATE(R_SERIAL0_BAUD, rec_baud, c115k2Hz);
+ break;
+ }
+
+ if (port->parity == 'E') {
+ rec_ctrl =
+ IO_STATE(R_SERIAL0_REC_CTRL, rec_par, even) |
+ IO_STATE(R_SERIAL0_REC_CTRL, rec_par_en, enable);
+ tr_ctrl =
+ IO_STATE(R_SERIAL0_TR_CTRL, tr_par, even) |
+ IO_STATE(R_SERIAL0_TR_CTRL, tr_par_en, enable);
+ } else if (port->parity == 'O') {
+ rec_ctrl =
+ IO_STATE(R_SERIAL0_REC_CTRL, rec_par, odd) |
+ IO_STATE(R_SERIAL0_REC_CTRL, rec_par_en, enable);
+ tr_ctrl =
+ IO_STATE(R_SERIAL0_TR_CTRL, tr_par, odd) |
+ IO_STATE(R_SERIAL0_TR_CTRL, tr_par_en, enable);
+ } else {
+ rec_ctrl =
+ IO_STATE(R_SERIAL0_REC_CTRL, rec_par, even) |
+ IO_STATE(R_SERIAL0_REC_CTRL, rec_par_en, disable);
+ tr_ctrl =
+ IO_STATE(R_SERIAL0_TR_CTRL, tr_par, even) |
+ IO_STATE(R_SERIAL0_TR_CTRL, tr_par_en, disable);
+ }
+
+ if (port->bits == 7)
+ {
+ rec_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_bitnr, rec_7bit);
+ tr_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_bitnr, tr_7bit);
+ }
+ else
+ {
+ rec_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_bitnr, rec_8bit);
+ tr_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_bitnr, tr_8bit);
+ }
+
+ *port->rec_ctrl =
+ IO_STATE(R_SERIAL0_REC_CTRL, dma_err, stop) |
+ IO_STATE(R_SERIAL0_REC_CTRL, rec_enable, enable) |
+ IO_STATE(R_SERIAL0_REC_CTRL, rts_, active) |
+ IO_STATE(R_SERIAL0_REC_CTRL, sampling, middle) |
+ IO_STATE(R_SERIAL0_REC_CTRL, rec_stick_par, normal) |
+ rec_ctrl;
+
+ *port->tr_ctrl =
+ IO_FIELD(R_SERIAL0_TR_CTRL, txd, 0) |
+ IO_STATE(R_SERIAL0_TR_CTRL, tr_enable, enable) |
+ IO_STATE(R_SERIAL0_TR_CTRL, auto_cts, disabled) |
+ IO_STATE(R_SERIAL0_TR_CTRL, stop_bits, one_bit) |
+ IO_STATE(R_SERIAL0_TR_CTRL, tr_stick_par, normal) |
+ tr_ctrl;
+}
+
+static void
+console_write_direct(struct console *co, const char *buf, unsigned int len)
+{
+ int i;
+ unsigned long flags;
+ local_irq_save(flags);
+ /* Send data */
+ for (i = 0; i < len; i++) {
+ /* Wait until transmitter is ready and send.*/
+ while (!(*port->read & IO_MASK(R_SERIAL0_READ, tr_ready)))
+ ;
+ *port->write = buf[i];
+ }
+ local_irq_restore(flags);
+}
+
+static void
+console_write(struct console *co, const char *buf, unsigned int len)
+{
+ if (!port)
+ return;
+
+#ifdef CONFIG_SVINTO_SIM
+ /* no use to simulate the serial debug output */
+ SIMCOUT(buf, len);
+ return;
+#endif
+
+ start_port();
+
+#ifdef CONFIG_ETRAX_KGDB
+ /* kgdb needs to output debug info using the gdb protocol */
+ putDebugString(buf, len);
+ return;
+#endif
+
+ if (debug_write_function)
+ debug_write_function(co->index, buf, len);
+ else
+ console_write_direct(co, buf, len);
+}
+
+/* legacy function */
+
+void
+console_print_etrax(const char *buf)
+{
+ console_write(NULL, buf, strlen(buf));
+}
+
+/* Use polling to get a single character FROM the debug port */
+
+int
+getDebugChar(void)
+{
+ unsigned long readval;
+
+ do {
+ readval = *port->read;
+ } while (!(readval & IO_MASK(R_SERIAL0_READ, data_avail)));
+
+ return (readval & IO_MASK(R_SERIAL0_READ, data_in));
+}
+
+/* Use polling to put a single character to the debug port */
+
+void
+putDebugChar(int val)
+{
+ while (!(*port->read & IO_MASK(R_SERIAL0_READ, tr_ready)))
+ ;
+ *port->write = val;
+}
+
+/* Enable irq for receiving chars on the debug port, used by kgdb */
+
+void
+enableDebugIRQ(void)
+{
+ *R_IRQ_MASK1_SET = port->irq;
+ /* use R_VECT_MASK directly, since we really bypass Linux normal
+ * IRQ handling in kgdb anyway, we don't need to use enable_irq
+ */
+ *R_VECT_MASK_SET = IO_STATE(R_VECT_MASK_SET, serial, set);
+
+ *port->rec_ctrl = IO_STATE(R_SERIAL0_REC_CTRL, rec_enable, enable);
+}
+
+static struct tty_driver*
+etrax_console_device(struct console* co, int *index)
+{
+ return serial_driver;
+}
+
+static int __init
+console_setup(struct console *co, char *options)
+{
+ char* s;
+
+ if (options) {
+ port = &ports[co->index];
+ port->baudrate = 115200;
+ port->parity = 'N';
+ port->bits = 8;
+ port->baudrate = simple_strtoul(options, NULL, 10);
+ s = options;
+ while(*s >= '0' && *s <= '9')
+ s++;
+ if (*s) port->parity = *s++;
+ if (*s) port->bits = *s++ - '0';
+ port->started = 0;
+ start_port();
+ }
+ return 0;
+}
+
+static struct console sercons = {
+ name : "ttyS",
+ write: console_write,
+ read : NULL,
+ device : etrax_console_device,
+ unblank : NULL,
+ setup : console_setup,
+ flags : CON_PRINTBUFFER,
+ index : -1,
+ cflag : 0,
+ next : NULL
+};
+static struct console sercons0 = {
+ name : "ttyS",
+ write: console_write,
+ read : NULL,
+ device : etrax_console_device,
+ unblank : NULL,
+ setup : console_setup,
+ flags : CON_PRINTBUFFER,
+ index : 0,
+ cflag : 0,
+ next : NULL
+};
+
+static struct console sercons1 = {
+ name : "ttyS",
+ write: console_write,
+ read : NULL,
+ device : etrax_console_device,
+ unblank : NULL,
+ setup : console_setup,
+ flags : CON_PRINTBUFFER,
+ index : 1,
+ cflag : 0,
+ next : NULL
+};
+static struct console sercons2 = {
+ name : "ttyS",
+ write: console_write,
+ read : NULL,
+ device : etrax_console_device,
+ unblank : NULL,
+ setup : console_setup,
+ flags : CON_PRINTBUFFER,
+ index : 2,
+ cflag : 0,
+ next : NULL
+};
+static struct console sercons3 = {
+ name : "ttyS",
+ write: console_write,
+ read : NULL,
+ device : etrax_console_device,
+ unblank : NULL,
+ setup : console_setup,
+ flags : CON_PRINTBUFFER,
+ index : 3,
+ cflag : 0,
+ next : NULL
+};
+/*
+ * Register console (for printk's etc)
+ */
+
+int __init
+init_etrax_debug(void)
+{
+ static int first = 1;
+
+ if (!first) {
+ if (!port) {
+ register_console(&sercons0);
+ register_console(&sercons1);
+ register_console(&sercons2);
+ register_console(&sercons3);
+ unregister_console(&sercons);
+ }
+ return 0;
+ }
+ first = 0;
+ if (port)
+ register_console(&sercons);
+ return 0;
+}
+
+int __init
+init_console(void)
+{
+ serial_driver = alloc_tty_driver(1);
+ if (!serial_driver)
+ return -ENOMEM;
+ return 0;
+}
+
+__initcall(init_etrax_debug);
diff --git a/arch/cris/arch-v10/kernel/entry.S b/arch/cris/arch-v10/kernel/entry.S
new file mode 100644
index 00000000000..1bc44f481c3
--- /dev/null
+++ b/arch/cris/arch-v10/kernel/entry.S
@@ -0,0 +1,1132 @@
+/* $Id: entry.S,v 1.23 2004/10/19 13:07:37 starvik Exp $
+ *
+ * linux/arch/cris/entry.S
+ *
+ * Copyright (C) 2000, 2001, 2002 Axis Communications AB
+ *
+ * Authors: Bjorn Wesen (bjornw@axis.com)
+ *
+ * $Log: entry.S,v $
+ * Revision 1.23 2004/10/19 13:07:37 starvik
+ * Merge of Linux 2.6.9
+ *
+ * Revision 1.22 2004/06/21 10:29:55 starvik
+ * Merge of Linux 2.6.7
+ *
+ * Revision 1.21 2004/06/09 05:30:27 starvik
+ * Clean up multiple interrupt handling.
+ * Prevent interrupts from interrupting each other.
+ * Handle all active interrupts.
+ *
+ * Revision 1.20 2004/06/08 08:55:32 starvik
+ * Removed unused code
+ *
+ * Revision 1.19 2004/06/04 11:56:15 starvik
+ * Implemented page table lookup for refills in assembler for improved performance.
+ *
+ * Revision 1.18 2004/05/11 12:28:25 starvik
+ * Merge of Linux 2.6.6
+ *
+ * Revision 1.17 2003/09/11 07:29:49 starvik
+ * Merge of Linux 2.6.0-test5
+ *
+ * Revision 1.16 2003/07/04 08:27:41 starvik
+ * Merge of Linux 2.5.74
+ *
+ * Revision 1.15 2003/04/09 07:32:55 starvik
+ * resume should return task_struct, not thread_info
+ *
+ * Revision 1.14 2003/04/09 05:20:44 starvik
+ * Merge of Linux 2.5.67
+ *
+ * Revision 1.13 2002/12/11 15:42:02 starvik
+ * Extracted v10 (ETRAX 100LX) specific stuff from arch/cris/kernel/*.c
+ *
+ * Revision 1.12 2002/12/10 09:00:10 starvik
+ * Merge of Linux 2.5.51
+ *
+ * Revision 1.11 2002/12/05 07:53:10 starvik
+ * Corrected constants used with btstq
+ *
+ * Revision 1.10 2002/11/27 08:45:10 starvik
+ * pid is in task_struct, not thread_info
+ *
+ * Revision 1.9 2002/11/26 09:52:05 starvik
+ * Added preemptive kernel scheduling (if CONFIG_PREEMPT)
+ *
+ * Revision 1.8 2002/11/20 11:56:11 starvik
+ * Merge of Linux 2.5.48
+ *
+ * Revision 1.7 2002/11/18 13:02:42 starvik
+ * Added fourth parameter to do_notify_resume
+ * Minor cleanup
+ *
+ * Revision 1.6 2002/11/11 10:37:50 starvik
+ * Use new asm-offset defines
+ * Modified for new location of current->work etc
+ * Removed SYMBOL_NAME from syscalls
+ * Added some new syscalls
+ *
+ * Revision 1.5 2002/11/05 06:45:11 starvik
+ * Merge of Linux 2.5.45
+ *
+ * Revision 1.4 2002/02/05 15:41:31 bjornw
+ * Rewritten to conform better to current 2.5 code (similar to arch/i386)
+ *
+ * Revision 1.3 2002/01/21 15:22:20 bjornw
+ * NICE_DOGGY fix from 2.4 arch/cris
+ *
+ * Revision 1.37 2001/12/07 17:03:55 bjornw
+ * Call a c-hook called watchdog_bite_hook instead of show_registers directly
+ *
+ * Revision 1.36 2001/11/22 13:36:36 bjornw
+ * * In ret_from_intr, check regs->dccr for usermode reentrance instead of
+ * DCCR explicitely (because the latter might not reflect current reality)
+ * * In mmu_bus_fault, set $r9 _after_ calling the C-code instead of before
+ * since $r9 is call-clobbered and is potentially needed afterwards
+ *
+ * Revision 1.35 2001/10/30 17:10:15 bjornw
+ * Add some syscalls
+ *
+ * Revision 1.34 2001/10/01 14:45:03 bjornw
+ * Removed underscores and added register prefixes
+ *
+ * Revision 1.33 2001/08/21 13:48:01 jonashg
+ * Added fix by HP to avoid oops when doing a hard_reset_now.
+ *
+ * Revision 1.32 2001/08/14 04:32:02 hp
+ * In _resume, add comment why R9 is saved; don't sound like it's call-saved.
+ *
+ * Revision 1.31 2001/07/25 16:07:42 bjornw
+ * softirq_active/mask -> softirq_pending only
+ *
+ * Revision 1.30 2001/07/05 01:03:32 hp
+ * - include asm/errno.h to get ENOSYS.
+ * - Use ENOSYS, not local constant LENOSYS; tweak comments.
+ * - Explain why .include, not #include is used.
+ * - Make oops-register-dump if watchdog bits and it's not expected.
+ * - Don't jsr, use jump _hard_reset_now, and skip spurious nop.
+ * - Use correct section attribute for section .rodata.
+ * - Adjust sys_ni_syscall fill number.
+ *
+ * Revision 1.29 2001/06/25 14:07:00 hp
+ * Fix review comment.
+ * * head.S: Use IO_STATE, IO_FIELD and IO_MASK constructs instead of
+ * magic numbers. Add comment that -traditional must not be used.
+ * * entry.S (SYMBOL_NAME): Change redefinition to use ## concatenation.
+ * Correct and update comment.
+ * * Makefile (.S.o): Don't use -traditional. Add comment why the
+ * toplevel rule can't be used (now that there's a reason).
+ *
+ * Revision 1.28 2001/06/21 02:00:40 hp
+ * * entry.S: Include asm/unistd.h.
+ * (_sys_call_table): Use section .rodata, not .data.
+ * (_kernel_thread): Move from...
+ * * process.c: ... here.
+ * * entryoffsets.c (VAL): Break out from...
+ * (OF): Use VAL.
+ * (LCLONE_VM): New asmified value from CLONE_VM.
+ *
+ * Revision 1.27 2001/05/29 11:25:27 markusl
+ * In case of "spurious_interrupt", do hard_reset instead of hanging system in a loop...
+ *
+ * Revision 1.26 2001/05/15 15:46:03 bjornw
+ * Include config.h now that we use some CONFIG_ options
+ *
+ * Revision 1.25 2001/05/15 05:38:47 hp
+ * Tweaked code in _ret_from_sys_call
+ *
+ * Revision 1.24 2001/05/15 05:27:49 hp
+ * Save r9 in r1 over function call rather than on stack.
+ *
+ * Revision 1.23 2001/05/15 05:10:00 hp
+ * Generate entry.S structure offsets from C
+ *
+ * Revision 1.22 2001/04/17 13:58:39 orjanf
+ * * Renamed CONFIG_KGDB to CONFIG_ETRAX_KGDB.
+ *
+ * Revision 1.21 2001/04/17 11:33:29 orjanf
+ * Updated according to review:
+ * * Included asm/sv_addr_ag.h to get macro for internal register.
+ * * Corrected comment regarding system call argument passing.
+ * * Removed comment about instruction being in a delay slot.
+ * * Added comment about SYMBOL_NAME macro.
+ *
+ * Revision 1.20 2001/04/12 08:51:07 hp
+ * - Add entry for sys_fcntl64. In fact copy last piece from i386 including ...
+ * - .rept to fill table to safe state with sys_ni_syscall.
+ *
+ * Revision 1.19 2001/04/04 09:43:32 orjanf
+ * * Moved do_sigtrap from traps.c to entry.S.
+ * * LTASK_PID need not be global anymore.
+ *
+ * Revision 1.18 2001/03/26 09:25:02 markusl
+ * Updated after review, should now handle USB interrupts correctly.
+ *
+ * Revision 1.17 2001/03/21 16:12:55 bjornw
+ * * Always make room for the cpu status record in the frame, in order to
+ * use the same framelength and layout for both mmu busfaults and normal
+ * irqs. No need to check for the explicit CRIS_FRAME_FIXUP type anymore.
+ * * Fixed bug with using addq for popping the stack in the epilogue - it
+ * destroyed the flag register. Use instructions that don't affect the
+ * flag register instead.
+ * * Removed write to R_PORT_PA_DATA during spurious_interrupt
+ *
+ * Revision 1.16 2001/03/20 19:43:02 bjornw
+ * * Get rid of esp0 setting
+ * * Give a 7th argument to a systemcall - the stackframe
+ *
+ * Revision 1.15 2001/03/05 13:14:30 bjornw
+ * Spelling fix
+ *
+ * Revision 1.14 2001/02/23 08:36:36 perf
+ * New ABI; syscallnr=r9, arg5=mof, arg6=srp.
+ * Corrected tracesys call check.
+ *
+ * Revision 1.13 2001/02/15 08:40:55 perf
+ * H-P by way of perf;
+ * - (_system_call): Don't read system call function address into r1.
+ * - (RBFExit): There is no such thing as a null pop. Adjust sp by addq.
+ * - (_system_call): Don't use r10 and don't save and restore it.
+ * - (THREAD_ESP0): New constant.
+ * - (_system_call): Inline set_esp0.
+ *
+ * Revision 1.12 2001/01/31 17:56:25 orjanf
+ * Added definition of LTASK_PID and made it global.
+ *
+ * Revision 1.11 2001/01/10 21:13:29 bjornw
+ * SYMBOL_NAME is defined incorrectly for the compiler options we currently use
+ *
+ * Revision 1.10 2000/12/18 23:47:56 bjornw
+ * * Added syscall trace support (ptrace), completely untested of course
+ * * Removed redundant check for NULL entries in syscall_table
+ *
+ * Revision 1.9 2000/11/21 16:40:51 bjornw
+ * * New frame type used when an SBFS frame needs to be popped without
+ * actually restarting the instruction
+ * * Enable interrupts in signal_return (they did so in x86, I hope it's a good
+ * idea)
+ *
+ * Revision 1.8 2000/11/17 16:53:35 bjornw
+ * Added detection of frame-type in Rexit, so that mmu_bus_fault can
+ * use ret_from_intr in the return-path to check for signals (like SEGV)
+ * and other foul things that might have occurred during the fault.
+ *
+ * Revision 1.7 2000/10/06 15:04:28 bjornw
+ * Include mof in register savings
+ *
+ * Revision 1.6 2000/09/12 16:02:44 bjornw
+ * Linux-2.4.0-test7 derived updates
+ *
+ * Revision 1.5 2000/08/17 15:35:15 bjornw
+ * 2.4.0-test6 changed local_irq_count and friends API
+ *
+ * Revision 1.4 2000/08/02 13:59:30 bjornw
+ * Removed olduname and uname from the syscall list
+ *
+ * Revision 1.3 2000/07/31 13:32:58 bjornw
+ * * Export ret_from_intr
+ * * _resume updated (prev/last tjohejsan)
+ * * timer_interrupt obsolete
+ * * SIGSEGV detection in mmu_bus_fault temporarily disabled
+ *
+ *
+ */
+
+/*
+ * entry.S contains the system-call and fault low-level handling routines.
+ *
+ * NOTE: This code handles signal-recognition, which happens every time
+ * after a timer-interrupt and after each system call.
+ *
+ * Stack layout in 'ret_from_system_call':
+ * ptrace needs to have all regs on the stack.
+ * if the order here is changed, it needs to be
+ * updated in fork.c:copy_process, signal.c:do_signal,
+ * ptrace.c and ptrace.h
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/linkage.h>
+#include <linux/sys.h>
+#include <asm/unistd.h>
+#include <asm/arch/sv_addr_ag.h>
+#include <asm/errno.h>
+#include <asm/thread_info.h>
+#include <asm/arch/offset.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+
+ ;; functions exported from this file
+
+ .globl system_call
+ .globl ret_from_intr
+ .globl ret_from_fork
+ .globl resume
+ .globl multiple_interrupt
+ .globl hwbreakpoint
+ .globl IRQ1_interrupt
+ .globl spurious_interrupt
+ .globl hw_bp_trigs
+ .globl mmu_bus_fault
+ .globl do_sigtrap
+ .globl gdb_handle_breakpoint
+ .globl sys_call_table
+
+ ;; below are various parts of system_call which are not in the fast-path
+
+#ifdef CONFIG_PREEMPT
+ ; Check if preemptive kernel scheduling should be done
+_resume_kernel:
+ ; Load current task struct
+ movs.w -8192, $r0 ; THREAD_SIZE = 8192
+ and.d $sp, $r0
+ move.d [$r0+TI_preempt_count], $r10 ; Preemption disabled?
+ bne _Rexit
+ nop
+_need_resched:
+ move.d [$r0+TI_flags], $r10
+ btstq TIF_NEED_RESCHED, $r10 ; Check if need_resched is set
+ bpl _Rexit
+ nop
+ ; Ok, lets's do some preemptive kernel scheduling
+ move.d PREEMPT_ACTIVE, $r10
+ move.d $r10, [$r0+TI_preempt_count] ; Mark as active
+ ei
+ jsr schedule
+ clear.d [$r0+TI_preempt_count] ; Mark as inactive
+ di
+ ; Load new task struct
+ movs.w -8192, $r0 ; THREAD_SIZE = 8192
+ and.d $sp, $r0
+ ; One more time (with new task)
+ ba _need_resched
+ nop
+#else
+#define _resume_kernel _Rexit
+#endif
+
+ ; Called at exit from fork. schedule_tail must be called to drop
+ ; spinlock if CONFIG_PREEMPT
+ret_from_fork:
+ jsr schedule_tail
+ ba ret_from_sys_call
+ nop
+
+ret_from_intr:
+ ;; check for resched if preemptive kernel or if we're going back to user-mode
+ ;; this test matches the user_regs(regs) macro
+ ;; we cannot simply test $dccr, because that does not necessarily
+ ;; reflect what mode we'll return into.
+
+ move.d [$sp + PT_dccr], $r0; regs->dccr
+ btstq 8, $r0 ; U-flag
+ bpl _resume_kernel
+ ; Note that di below is in delay slot
+
+_resume_userspace:
+ di ; so need_resched and sigpending don't change
+
+ movs.w -8192, $r0 ; THREAD_SIZE == 8192
+ and.d $sp, $r0
+
+ move.d [$r0+TI_flags], $r10 ; current->work
+ and.d _TIF_WORK_MASK, $r10 ; is there any work to be done on return
+ bne _work_pending
+ nop
+ ba _Rexit
+ nop
+
+ ;; The system_call is called by a BREAK instruction, which works like
+ ;; an interrupt call but it stores the return PC in BRP instead of IRP.
+ ;; Since we dont really want to have two epilogues (one for system calls
+ ;; and one for interrupts) we push the contents of BRP instead of IRP in the
+ ;; system call prologue, to make it look like an ordinary interrupt on the
+ ;; stackframe.
+ ;;
+ ;; Since we can't have system calls inside interrupts, it should not matter
+ ;; that we don't stack IRP.
+ ;;
+ ;; In r9 we have the wanted syscall number. Arguments come in r10,r11,r12,r13,mof,srp
+ ;;
+ ;; This function looks on the _surface_ like spaghetti programming, but it's
+ ;; really designed so that the fast-path does not force cache-loading of non-used
+ ;; instructions. Only the non-common cases cause the outlined code to run..
+
+system_call:
+ ;; stack-frame similar to the irq heads, which is reversed in ret_from_sys_call
+ move $brp,[$sp=$sp-16]; instruction pointer and room for a fake SBFS frame
+ push $srp
+ push $dccr
+ push $mof
+ subq 14*4, $sp ; make room for r0-r13
+ movem $r13, [$sp] ; push r0-r13
+ push $r10 ; push orig_r10
+ clear.d [$sp=$sp-4] ; frametype == 0, normal stackframe
+
+ movs.w -ENOSYS, $r0
+ move.d $r0, [$sp+PT_r10] ; put the default return value in r10 in the frame
+
+ ;; check if this process is syscall-traced
+
+ movs.w -8192, $r0 ; THREAD_SIZE == 8192
+ and.d $sp, $r0
+
+ move.d [$r0+TI_flags], $r0
+ btstq TIF_SYSCALL_TRACE, $r0
+ bmi _syscall_trace_entry
+ nop
+
+_syscall_traced:
+
+ ;; check for sanity in the requested syscall number
+
+ cmpu.w NR_syscalls, $r9
+ bcc ret_from_sys_call
+ lslq 2, $r9 ; multiply by 4, in the delay slot
+
+ ;; as a bonus 7th parameter, we give the location on the stack
+ ;; of the register structure itself. some syscalls need this.
+
+ push $sp
+
+ ;; the parameter carrying registers r10, r11, r12 and 13 are intact.
+ ;; the fifth and sixth parameters (if any) was in mof and srp
+ ;; respectively, and we need to put them on the stack.
+
+ push $srp
+ push $mof
+
+ jsr [$r9+sys_call_table] ; actually do the system call
+ addq 3*4, $sp ; pop the mof, srp and regs parameters
+ move.d $r10, [$sp+PT_r10] ; save the return value
+
+ moveq 1, $r9 ; "parameter" to ret_from_sys_call to show it was a sys call
+
+ ;; fall through into ret_from_sys_call to return
+
+ret_from_sys_call:
+ ;; r9 is a parameter - if >=1 we came from a syscall, if 0, from an irq
+
+ ;; get the current task-struct pointer (see top for defs)
+
+ movs.w -8192, $r0 ; THREAD_SIZE == 8192
+ and.d $sp, $r0
+
+ di ; make sure need_resched and sigpending don't change
+ move.d [$r0+TI_flags],$r1
+ and.d _TIF_ALLWORK_MASK, $r1
+ bne _syscall_exit_work
+ nop
+
+_Rexit:
+ ;; this epilogue MUST match the prologues in multiple_interrupt, irq.h and ptregs.h
+ pop $r10 ; frametype
+ bne _RBFexit ; was not CRIS_FRAME_NORMAL, handle otherwise
+ addq 4, $sp ; skip orig_r10, in delayslot
+ movem [$sp+], $r13 ; registers r0-r13
+ pop $mof ; multiply overflow register
+ pop $dccr ; condition codes
+ pop $srp ; subroutine return pointer
+ ;; now we have a 4-word SBFS frame which we do not want to restore
+ ;; using RBF since it was not stacked with SBFS. instead we would like to
+ ;; just get the PC value to restart it with, and skip the rest of
+ ;; the frame.
+ ;; Also notice that it's important to use instructions here that
+ ;; keep the interrupts disabled (since we've already popped DCCR)
+ move [$sp=$sp+16], $p8; pop the SBFS frame from the sp
+ jmpu [$sp-16] ; return through the irp field in the sbfs frame
+
+_RBFexit:
+ movem [$sp+], $r13 ; registers r0-r13, in delay slot
+ pop $mof ; multiply overflow register
+ pop $dccr ; condition codes
+ pop $srp ; subroutine return pointer
+ rbf [$sp+] ; return by popping the CPU status
+
+ ;; We get here after doing a syscall if extra work might need to be done
+ ;; perform syscall exit tracing if needed
+
+_syscall_exit_work:
+ ;; $r0 contains current at this point and irq's are disabled
+
+ move.d [$r0+TI_flags], $r1
+ btstq TIF_SYSCALL_TRACE, $r1
+ bpl _work_pending
+ nop
+
+ ei
+
+ move.d $r9, $r1 ; preserve r9
+ jsr do_syscall_trace
+ move.d $r1, $r9
+
+ ba _resume_userspace
+ nop
+
+_work_pending:
+ move.d [$r0+TI_flags], $r1
+ btstq TIF_NEED_RESCHED, $r1
+ bpl _work_notifysig ; was neither trace nor sched, must be signal/notify
+ nop
+
+_work_resched:
+ move.d $r9, $r1 ; preserve r9
+ jsr schedule
+ move.d $r1, $r9
+ di
+
+ move.d [$r0+TI_flags], $r1
+ and.d _TIF_WORK_MASK, $r1; ignore the syscall trace counter
+ beq _Rexit
+ nop
+ btstq TIF_NEED_RESCHED, $r1
+ bmi _work_resched ; current->work.need_resched
+ nop
+
+_work_notifysig:
+ ;; deal with pending signals and notify-resume requests
+
+ move.d $r9, $r10 ; do_notify_resume syscall/irq param
+ moveq 0, $r11 ; oldset param - 0 in this case
+ move.d $sp, $r12 ; the regs param
+ move.d $r1, $r13 ; the thread_info_flags parameter
+ jsr do_notify_resume
+
+ ba _Rexit
+ nop
+
+ ;; We get here as a sidetrack when we've entered a syscall with the
+ ;; trace-bit set. We need to call do_syscall_trace and then continue
+ ;; with the call.
+
+_syscall_trace_entry:
+ ;; PT_r10 in the frame contains -ENOSYS as required, at this point
+
+ jsr do_syscall_trace
+
+ ;; now re-enter the syscall code to do the syscall itself
+ ;; we need to restore $r9 here to contain the wanted syscall, and
+ ;; the other parameter-bearing registers
+
+ move.d [$sp+PT_r9], $r9
+ move.d [$sp+PT_orig_r10], $r10 ; PT_r10 is already filled with -ENOSYS.
+ move.d [$sp+PT_r11], $r11
+ move.d [$sp+PT_r12], $r12
+ move.d [$sp+PT_r13], $r13
+ move [$sp+PT_mof], $mof
+ move [$sp+PT_srp], $srp
+
+ ba _syscall_traced
+ nop
+
+ ;; resume performs the actual task-switching, by switching stack pointers
+ ;; input arguments: r10 = prev, r11 = next, r12 = thread offset in task struct
+ ;; returns old current in r10
+ ;;
+ ;; TODO: see the i386 version. The switch_to which calls resume in our version
+ ;; could really be an inline asm of this.
+
+resume:
+ push $srp ; we keep the old/new PC on the stack
+ add.d $r12, $r10 ; r10 = current tasks tss
+ move $dccr, [$r10+THREAD_dccr]; save irq enable state
+ di
+
+ move $usp, [$r10+ THREAD_usp] ; save user-mode stackpointer
+
+ ;; See copy_thread for the reason why register R9 is saved.
+ subq 10*4, $sp
+ movem $r9, [$sp] ; save non-scratch registers and R9.
+
+ move.d $sp, [$r10+THREAD_ksp] ; save the kernel stack pointer for the old task
+ move.d $sp, $r10 ; return last running task in r10
+ and.d -8192, $r10 ; get thread_info from stackpointer
+ move.d [$r10+TI_task], $r10 ; get task
+ add.d $r12, $r11 ; find the new tasks tss
+ move.d [$r11+THREAD_ksp], $sp ; switch into the new stackframe by restoring kernel sp
+
+ movem [$sp+], $r9 ; restore non-scratch registers and R9.
+
+ move [$r11+THREAD_usp], $usp ; restore user-mode stackpointer
+
+ move [$r11+THREAD_dccr], $dccr ; restore irq enable status
+ jump [$sp+] ; restore PC
+
+ ;; This is the MMU bus fault handler.
+ ;; It needs to stack the CPU status and overall is different
+ ;; from the other interrupt handlers.
+
+mmu_bus_fault:
+ ;; For refills we try to do a quick page table lookup. If it is
+ ;; a real fault we let the mm subsystem handle it.
+
+ ;; the first longword in the sbfs frame was the interrupted PC
+ ;; which fits nicely with the "IRP" slot in pt_regs normally used to
+ ;; contain the return address. used by Oops to print kernel errors.
+ sbfs [$sp=$sp-16] ; push the internal CPU status
+ push $dccr
+ di
+ subq 2*4, $sp
+ movem $r1, [$sp]
+ move.d [R_MMU_CAUSE], $r1
+ ;; ETRAX 100LX TR89 bugfix: if the second half of an unaligned
+ ;; write causes a MMU-fault, it will not be restarted correctly.
+ ;; This could happen if a write crosses a page-boundary and the
+ ;; second page is not yet COW'ed or even loaded. The workaround
+ ;; is to clear the unaligned bit in the CPU status record, so
+ ;; that the CPU will rerun both the first and second halves of
+ ;; the instruction. This will not have any sideeffects unless
+ ;; the first half goes to any device or memory that can't be
+ ;; written twice, and which is mapped through the MMU.
+ ;;
+ ;; We only need to do this for writes.
+ btstq 8, $r1 ; Write access?
+ bpl 1f
+ nop
+ move.d [$sp+16], $r0 ; Clear unaligned bit in csrinstr
+ and.d ~(1<<5), $r0
+ move.d $r0, [$sp+16]
+1: btstq 12, $r1 ; Refill?
+ bpl 2f
+ lsrq PMD_SHIFT, $r1 ; Get PMD index into PGD (bit 24-31)
+ move.d [current_pgd], $r0 ; PGD for the current process
+ move.d [$r0+$r1.d], $r0 ; Get PMD
+ beq 2f
+ nop
+ and.w PAGE_MASK, $r0 ; Remove PMD flags
+ move.d [R_MMU_CAUSE], $r1
+ lsrq PAGE_SHIFT, $r1
+ and.d 0x7ff, $r1 ; Get PTE index into PMD (bit 13-24)
+ move.d [$r0+$r1.d], $r1 ; Get PTE
+ beq 2f
+ nop
+ ;; Store in TLB
+ move.d $r1, [R_TLB_LO]
+ ;; Return
+ movem [$sp+], $r1
+ pop $dccr
+ rbf [$sp+] ; return by popping the CPU status
+
+2: ; PMD or PTE missing, let the mm subsystem fix it up.
+ movem [$sp+], $r1
+ pop $dccr
+
+ ; Ok, not that easy, pass it on to the mm subsystem
+ ; The MMU status record is now on the stack
+ push $srp ; make a stackframe similar to pt_regs
+ push $dccr
+ push $mof
+ di
+ subq 14*4, $sp
+ movem $r13, [$sp]
+ push $r10 ; dummy orig_r10
+ moveq 1, $r10
+ push $r10 ; frametype == 1, BUSFAULT frame type
+
+ move.d $sp, $r10 ; pt_regs argument to handle_mmu_bus_fault
+
+ jsr handle_mmu_bus_fault ; in arch/cris/arch-v10/mm/fault.c
+
+ ;; now we need to return through the normal path, we cannot just
+ ;; do the RBFexit since we might have killed off the running
+ ;; process due to a SEGV, scheduled due to a page blocking or
+ ;; whatever.
+
+ moveq 0, $r9 ; busfault is equivalent to an irq
+
+ ba ret_from_intr
+ nop
+
+ ;; special handlers for breakpoint and NMI
+hwbreakpoint:
+ push $dccr
+ di
+ push $r10
+ push $r11
+ move.d [hw_bp_trig_ptr],$r10
+ move $brp,$r11
+ move.d $r11,[$r10+]
+ move.d $r10,[hw_bp_trig_ptr]
+1: pop $r11
+ pop $r10
+ pop $dccr
+ retb
+ nop
+
+IRQ1_interrupt:
+
+#if defined(CONFIG_ETRAX_WATCHDOG) && !defined(CONFIG_SVINTO_SIM)
+;; If we receive a watchdog interrupt while it is not expected, then set
+;; up a canonical frame and dump register contents before dying.
+
+ ;; this prologue MUST match the one in irq.h and the struct in ptregs.h!!!
+ move $brp,[$sp=$sp-16]; instruction pointer and room for a fake SBFS frame
+ push $srp
+ push $dccr
+ push $mof
+ di
+ subq 14*4, $sp
+ movem $r13, [$sp]
+ push $r10 ; push orig_r10
+ clear.d [$sp=$sp-4] ; frametype == 0, normal frame
+
+;; We don't check that we actually were bit by the watchdog as opposed to
+;; an external NMI, since there is currently no handler for external NMI.
+
+;; Check if we're waiting for reset to happen, as signalled by
+;; hard_reset_now setting cause_of_death to a magic value. If so, just
+;; get stuck until reset happens.
+ .comm cause_of_death, 4 ;; Don't declare this anywhere.
+ move.d [cause_of_death], $r10
+ cmp.d 0xbedead, $r10
+_killed_by_death:
+ beq _killed_by_death
+ nop
+
+;; We'll see this in ksymoops dumps.
+Watchdog_bite:
+
+#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY
+ ;; We just restart the watchdog here to be sure we dont get
+ ;; hit while printing the watchdogmsg below
+ ;; This restart is compatible with the rest of the C-code, so
+ ;; the C-code can keep restarting the watchdog after this point.
+ ;; The non-NICE_DOGGY code below though, disables the possibility
+ ;; to restart since it changes the watchdog key, to avoid any
+ ;; buggy loops etc. keeping the watchdog alive after this.
+ jsr reset_watchdog
+#else
+
+;; We need to extend the 3.3ms after the NMI at watchdog bite, so we have
+;; time for an oops-dump over a 115k2 serial wire. Another 100ms should do.
+
+;; Change the watchdog key to an arbitrary 3-bit value and restart the
+;; watchdog.
+#define WD_INIT 2
+ moveq IO_FIELD (R_WATCHDOG, key, WD_INIT), $r10
+ move.d R_WATCHDOG, $r11
+
+ move.d $r10, [$r11]
+ moveq IO_FIELD (R_WATCHDOG, key, \
+ IO_EXTRACT (R_WATCHDOG, key, \
+ IO_MASK (R_WATCHDOG, key)) \
+ ^ WD_INIT) \
+ | IO_STATE (R_WATCHDOG, enable, start), $r10
+ move.d $r10, [$r11]
+
+#endif
+
+;; Note that we don't do "setf m" here (or after two necessary NOPs),
+;; since *not* doing that saves us from re-entrancy checks. We don't want
+;; to get here again due to possible subsequent NMIs; we want the watchdog
+;; to reset us.
+
+ move.d _watchdogmsg,$r10
+ jsr printk
+
+ move.d $sp, $r10
+ jsr watchdog_bite_hook
+
+;; This nop is here so we see the "Watchdog_bite" label in ksymoops dumps
+;; rather than "spurious_interrupt".
+ nop
+;; At this point we drop down into spurious_interrupt, which will do a
+;; hard reset.
+
+ .section .rodata,"a"
+_watchdogmsg:
+ .ascii "Oops: bitten by watchdog\n\0"
+ .previous
+
+#endif /* CONFIG_ETRAX_WATCHDOG and not CONFIG_SVINTO_SIM */
+
+spurious_interrupt:
+ di
+ jump hard_reset_now
+
+ ;; this handles the case when multiple interrupts arrive at the same time
+ ;; we jump to the first set interrupt bit in a priority fashion
+ ;; the hardware will call the unserved interrupts after the handler finishes
+
+multiple_interrupt:
+ ;; this prologue MUST match the one in irq.h and the struct in ptregs.h!!!
+ move $irp,[$sp=$sp-16]; instruction pointer and room for a fake SBFS frame
+ push $srp
+ push $dccr
+ push $mof
+ di
+ subq 14*4, $sp
+ movem $r13, [$sp]
+ push $r10 ; push orig_r10
+ clear.d [$sp=$sp-4] ; frametype == 0, normal frame
+
+ moveq 2, $r2 ; first bit we care about is the timer0 irq
+ move.d [R_VECT_MASK_RD], $r0; read the irq bits that triggered the multiple irq
+ move.d $r0, [R_VECT_MASK_CLR] ; Block all active IRQs
+1:
+ btst $r2, $r0 ; check for the irq given by bit r2
+ bpl 2f
+ move.d $r2, $r10 ; First argument to do_IRQ
+ move.d $sp, $r11 ; second argument to do_IRQ
+ jsr do_IRQ
+2:
+ addq 1, $r2 ; next vector bit
+ cmp.b 32, $r2
+ bne 1b ; process all irq's up to and including number 31
+ moveq 0, $r9 ; make ret_from_intr realise we came from an ir
+
+ move.d $r0, [R_VECT_MASK_SET] ; Unblock all the IRQs
+ jump ret_from_intr
+
+do_sigtrap:
+ ;;
+ ;; SIGTRAP the process that executed the break instruction.
+ ;; Make a frame that Rexit in entry.S expects.
+ ;;
+ move $brp, [$sp=$sp-16] ; Push BRP while faking a cpu status record.
+ push $srp ; Push subroutine return pointer.
+ push $dccr ; Push condition codes.
+ push $mof ; Push multiply overflow reg.
+ di ; Need to disable irq's at this point.
+ subq 14*4, $sp ; Make room for r0-r13.
+ movem $r13, [$sp] ; Push the r0-r13 registers.
+ push $r10 ; Push orig_r10.
+ clear.d [$sp=$sp-4] ; Frametype - this is a normal stackframe.
+
+ movs.w -8192,$r9 ; THREAD_SIZE == 8192
+ and.d $sp, $r9
+ move.d [$r9+TI_task], $r10
+ move.d [$r10+TASK_pid], $r10 ; current->pid as arg1.
+ moveq 5, $r11 ; SIGTRAP as arg2.
+ jsr sys_kill
+ jump ret_from_intr ; Use the return routine for interrupts.
+
+gdb_handle_breakpoint:
+ push $dccr
+ push $r0
+#ifdef CONFIG_ETRAX_KGDB
+ move $dccr, $r0 ; U-flag not affected by previous insns.
+ btstq 8, $r0 ; Test the U-flag.
+ bmi _ugdb_handle_breakpoint ; Go to user mode debugging.
+ nop ; Empty delay slot (cannot pop r0 here).
+ pop $r0 ; Restore r0.
+ ba kgdb_handle_breakpoint ; Go to kernel debugging.
+ pop $dccr ; Restore dccr in delay slot.
+#endif
+
+_ugdb_handle_breakpoint:
+ move $brp, $r0 ; Use r0 temporarily for calculation.
+ subq 2, $r0 ; Set to address of previous instruction.
+ move $r0, $brp
+ pop $r0 ; Restore r0.
+ ba do_sigtrap ; SIGTRAP the offending process.
+ pop $dccr ; Restore dccr in delay slot.
+
+ .data
+
+hw_bp_trigs:
+ .space 64*4
+hw_bp_trig_ptr:
+ .dword hw_bp_trigs
+
+ .section .rodata,"a"
+sys_call_table:
+ .long sys_restart_syscall /* 0 - old "setup()" system call, used for restarting */
+ .long sys_exit
+ .long sys_fork
+ .long sys_read
+ .long sys_write
+ .long sys_open /* 5 */
+ .long sys_close
+ .long sys_waitpid
+ .long sys_creat
+ .long sys_link
+ .long sys_unlink /* 10 */
+ .long sys_execve
+ .long sys_chdir
+ .long sys_time
+ .long sys_mknod
+ .long sys_chmod /* 15 */
+ .long sys_lchown16
+ .long sys_ni_syscall /* old break syscall holder */
+ .long sys_stat
+ .long sys_lseek
+ .long sys_getpid /* 20 */
+ .long sys_mount
+ .long sys_oldumount
+ .long sys_setuid16
+ .long sys_getuid16
+ .long sys_stime /* 25 */
+ .long sys_ptrace
+ .long sys_alarm
+ .long sys_fstat
+ .long sys_pause
+ .long sys_utime /* 30 */
+ .long sys_ni_syscall /* old stty syscall holder */
+ .long sys_ni_syscall /* old gtty syscall holder */
+ .long sys_access
+ .long sys_nice
+ .long sys_ni_syscall /* 35 old ftime syscall holder */
+ .long sys_sync
+ .long sys_kill
+ .long sys_rename
+ .long sys_mkdir
+ .long sys_rmdir /* 40 */
+ .long sys_dup
+ .long sys_pipe
+ .long sys_times
+ .long sys_ni_syscall /* old prof syscall holder */
+ .long sys_brk /* 45 */
+ .long sys_setgid16
+ .long sys_getgid16
+ .long sys_signal
+ .long sys_geteuid16
+ .long sys_getegid16 /* 50 */
+ .long sys_acct
+ .long sys_umount /* recycled never used phys( */
+ .long sys_ni_syscall /* old lock syscall holder */
+ .long sys_ioctl
+ .long sys_fcntl /* 55 */
+ .long sys_ni_syscall /* old mpx syscall holder */
+ .long sys_setpgid
+ .long sys_ni_syscall /* old ulimit syscall holder */
+ .long sys_ni_syscall /* old sys_olduname holder */
+ .long sys_umask /* 60 */
+ .long sys_chroot
+ .long sys_ustat
+ .long sys_dup2
+ .long sys_getppid
+ .long sys_getpgrp /* 65 */
+ .long sys_setsid
+ .long sys_sigaction
+ .long sys_sgetmask
+ .long sys_ssetmask
+ .long sys_setreuid16 /* 70 */
+ .long sys_setregid16
+ .long sys_sigsuspend
+ .long sys_sigpending
+ .long sys_sethostname
+ .long sys_setrlimit /* 75 */
+ .long sys_old_getrlimit
+ .long sys_getrusage
+ .long sys_gettimeofday
+ .long sys_settimeofday
+ .long sys_getgroups16 /* 80 */
+ .long sys_setgroups16
+ .long sys_select /* was old_select in Linux/E100 */
+ .long sys_symlink
+ .long sys_lstat
+ .long sys_readlink /* 85 */
+ .long sys_uselib
+ .long sys_swapon
+ .long sys_reboot
+ .long old_readdir
+ .long old_mmap /* 90 */
+ .long sys_munmap
+ .long sys_truncate
+ .long sys_ftruncate
+ .long sys_fchmod
+ .long sys_fchown16 /* 95 */
+ .long sys_getpriority
+ .long sys_setpriority
+ .long sys_ni_syscall /* old profil syscall holder */
+ .long sys_statfs
+ .long sys_fstatfs /* 100 */
+ .long sys_ni_syscall /* sys_ioperm in i386 */
+ .long sys_socketcall
+ .long sys_syslog
+ .long sys_setitimer
+ .long sys_getitimer /* 105 */
+ .long sys_newstat
+ .long sys_newlstat
+ .long sys_newfstat
+ .long sys_ni_syscall /* old sys_uname holder */
+ .long sys_ni_syscall /* sys_iopl in i386 */
+ .long sys_vhangup
+ .long sys_ni_syscall /* old "idle" system call */
+ .long sys_ni_syscall /* vm86old in i386 */
+ .long sys_wait4
+ .long sys_swapoff /* 115 */
+ .long sys_sysinfo
+ .long sys_ipc
+ .long sys_fsync
+ .long sys_sigreturn
+ .long sys_clone /* 120 */
+ .long sys_setdomainname
+ .long sys_newuname
+ .long sys_ni_syscall /* sys_modify_ldt */
+ .long sys_adjtimex
+ .long sys_mprotect /* 125 */
+ .long sys_sigprocmask
+ .long sys_ni_syscall /* old "create_module" */
+ .long sys_init_module
+ .long sys_delete_module
+ .long sys_ni_syscall /* 130: old "get_kernel_syms" */
+ .long sys_quotactl
+ .long sys_getpgid
+ .long sys_fchdir
+ .long sys_bdflush
+ .long sys_sysfs /* 135 */
+ .long sys_personality
+ .long sys_ni_syscall /* for afs_syscall */
+ .long sys_setfsuid16
+ .long sys_setfsgid16
+ .long sys_llseek /* 140 */
+ .long sys_getdents
+ .long sys_select
+ .long sys_flock
+ .long sys_msync
+ .long sys_readv /* 145 */
+ .long sys_writev
+ .long sys_getsid
+ .long sys_fdatasync
+ .long sys_sysctl
+ .long sys_mlock /* 150 */
+ .long sys_munlock
+ .long sys_mlockall
+ .long sys_munlockall
+ .long sys_sched_setparam
+ .long sys_sched_getparam /* 155 */
+ .long sys_sched_setscheduler
+ .long sys_sched_getscheduler
+ .long sys_sched_yield
+ .long sys_sched_get_priority_max
+ .long sys_sched_get_priority_min /* 160 */
+ .long sys_sched_rr_get_interval
+ .long sys_nanosleep
+ .long sys_mremap
+ .long sys_setresuid16
+ .long sys_getresuid16 /* 165 */
+ .long sys_ni_syscall /* sys_vm86 */
+ .long sys_ni_syscall /* Old sys_query_module */
+ .long sys_poll
+ .long sys_nfsservctl
+ .long sys_setresgid16 /* 170 */
+ .long sys_getresgid16
+ .long sys_prctl
+ .long sys_rt_sigreturn
+ .long sys_rt_sigaction
+ .long sys_rt_sigprocmask /* 175 */
+ .long sys_rt_sigpending
+ .long sys_rt_sigtimedwait
+ .long sys_rt_sigqueueinfo
+ .long sys_rt_sigsuspend
+ .long sys_pread64 /* 180 */
+ .long sys_pwrite64
+ .long sys_chown16
+ .long sys_getcwd
+ .long sys_capget
+ .long sys_capset /* 185 */
+ .long sys_sigaltstack
+ .long sys_sendfile
+ .long sys_ni_syscall /* streams1 */
+ .long sys_ni_syscall /* streams2 */
+ .long sys_vfork /* 190 */
+ .long sys_getrlimit
+ .long sys_mmap2
+ .long sys_truncate64
+ .long sys_ftruncate64
+ .long sys_stat64 /* 195 */
+ .long sys_lstat64
+ .long sys_fstat64
+ .long sys_lchown
+ .long sys_getuid
+ .long sys_getgid /* 200 */
+ .long sys_geteuid
+ .long sys_getegid
+ .long sys_setreuid
+ .long sys_setregid
+ .long sys_getgroups /* 205 */
+ .long sys_setgroups
+ .long sys_fchown
+ .long sys_setresuid
+ .long sys_getresuid
+ .long sys_setresgid /* 210 */
+ .long sys_getresgid
+ .long sys_chown
+ .long sys_setuid
+ .long sys_setgid
+ .long sys_setfsuid /* 215 */
+ .long sys_setfsgid
+ .long sys_pivot_root
+ .long sys_mincore
+ .long sys_madvise
+ .long sys_getdents64 /* 220 */
+ .long sys_fcntl64
+ .long sys_ni_syscall /* reserved for TUX */
+ .long sys_ni_syscall
+ .long sys_gettid
+ .long sys_readahead /* 225 */
+ .long sys_setxattr
+ .long sys_lsetxattr
+ .long sys_fsetxattr
+ .long sys_getxattr
+ .long sys_lgetxattr /* 230 */
+ .long sys_fgetxattr
+ .long sys_listxattr
+ .long sys_llistxattr
+ .long sys_flistxattr
+ .long sys_removexattr /* 235 */
+ .long sys_lremovexattr
+ .long sys_fremovexattr
+ .long sys_tkill
+ .long sys_sendfile64
+ .long sys_futex /* 240 */
+ .long sys_sched_setaffinity
+ .long sys_sched_getaffinity
+ .long sys_ni_syscall /* sys_set_thread_area */
+ .long sys_ni_syscall /* sys_get_thread_area */
+ .long sys_io_setup /* 245 */
+ .long sys_io_destroy
+ .long sys_io_getevents
+ .long sys_io_submit
+ .long sys_io_cancel
+ .long sys_fadvise64 /* 250 */
+ .long sys_ni_syscall
+ .long sys_exit_group
+ .long sys_lookup_dcookie
+ .long sys_epoll_create
+ .long sys_epoll_ctl /* 255 */
+ .long sys_epoll_wait
+ .long sys_remap_file_pages
+ .long sys_set_tid_address
+ .long sys_timer_create
+ .long sys_timer_settime /* 260 */
+ .long sys_timer_gettime
+ .long sys_timer_getoverrun
+ .long sys_timer_delete
+ .long sys_clock_settime
+ .long sys_clock_gettime /* 265 */
+ .long sys_clock_getres
+ .long sys_clock_nanosleep
+ .long sys_statfs64
+ .long sys_fstatfs64
+ .long sys_tgkill /* 270 */
+ .long sys_utimes
+ .long sys_fadvise64_64
+ .long sys_ni_syscall /* sys_vserver */
+ .long sys_ni_syscall /* sys_mbind */
+ .long sys_ni_syscall /* 275 sys_get_mempolicy */
+ .long sys_ni_syscall /* sys_set_mempolicy */
+ .long sys_mq_open
+ .long sys_mq_unlink
+ .long sys_mq_timedsend
+ .long sys_mq_timedreceive /* 280 */
+ .long sys_mq_notify
+ .long sys_mq_getsetattr
+ .long sys_ni_syscall /* reserved for kexec */
+ .long sys_waitid
+
+ /*
+ * NOTE!! This doesn't have to be exact - we just have
+ * to make sure we have _enough_ of the "sys_ni_syscall"
+ * entries. Don't panic if you notice that this hasn't
+ * been shrunk every time we add a new system call.
+ */
+
+ .rept NR_syscalls-(.-sys_call_table)/4
+ .long sys_ni_syscall
+ .endr
+
diff --git a/arch/cris/arch-v10/kernel/fasttimer.c b/arch/cris/arch-v10/kernel/fasttimer.c
new file mode 100644
index 00000000000..4717f7ae8e5
--- /dev/null
+++ b/arch/cris/arch-v10/kernel/fasttimer.c
@@ -0,0 +1,977 @@
+/* $Id: fasttimer.c,v 1.6 2004/05/14 10:18:39 starvik Exp $
+ * linux/arch/cris/kernel/fasttimer.c
+ *
+ * Fast timers for ETRAX100/ETRAX100LX
+ * This may be useful in other OS than Linux so use 2 space indentation...
+ *
+ * $Log: fasttimer.c,v $
+ * Revision 1.6 2004/05/14 10:18:39 starvik
+ * Export fast_timer_list
+ *
+ * Revision 1.5 2004/05/14 07:58:01 starvik
+ * Merge of changes from 2.4
+ *
+ * Revision 1.4 2003/07/04 08:27:41 starvik
+ * Merge of Linux 2.5.74
+ *
+ * Revision 1.3 2002/12/12 08:26:32 starvik
+ * Don't use C-comments inside CVS comments
+ *
+ * Revision 1.2 2002/12/11 15:42:02 starvik
+ * Extracted v10 (ETRAX 100LX) specific stuff from arch/cris/kernel/
+ *
+ * Revision 1.1 2002/11/18 07:58:06 starvik
+ * Fast timers (from Linux 2.4)
+ *
+ * Revision 1.5 2002/10/15 06:21:39 starvik
+ * Added call to init_waitqueue_head
+ *
+ * Revision 1.4 2002/05/28 17:47:59 johana
+ * Added del_fast_timer()
+ *
+ * Revision 1.3 2002/05/28 16:16:07 johana
+ * Handle empty fast_timer_list
+ *
+ * Revision 1.2 2002/05/27 15:38:42 johana
+ * Made it compile without warnings on Linux 2.4.
+ * (includes, wait_queue, PROC_FS and snprintf)
+ *
+ * Revision 1.1 2002/05/27 15:32:25 johana
+ * arch/etrax100/kernel/fasttimer.c v1.8 from the elinux tree.
+ *
+ * Revision 1.8 2001/11/27 13:50:40 pkj
+ * Disable interrupts while stopping the timer and while modifying the
+ * list of active timers in timer1_handler() as it may be interrupted
+ * by other interrupts (e.g., the serial interrupt) which may add fast
+ * timers.
+ *
+ * Revision 1.7 2001/11/22 11:50:32 pkj
+ * * Only store information about the last 16 timers.
+ * * proc_fasttimer_read() now uses an allocated buffer, since it
+ * requires more space than just a page even for only writing the
+ * last 16 timers. The buffer is only allocated on request, so
+ * unless /proc/fasttimer is read, it is never allocated.
+ * * Renamed fast_timer_started to fast_timers_started to match
+ * fast_timers_added and fast_timers_expired.
+ * * Some clean-up.
+ *
+ * Revision 1.6 2000/12/13 14:02:08 johana
+ * Removed volatile for fast_timer_list
+ *
+ * Revision 1.5 2000/12/13 13:55:35 johana
+ * Added DEBUG_LOG, added som cli() and cleanup
+ *
+ * Revision 1.4 2000/12/05 13:48:50 johana
+ * Added range check when writing proc file, modified timer int handling
+ *
+ * Revision 1.3 2000/11/23 10:10:20 johana
+ * More debug/logging possibilities.
+ * Moved GET_JIFFIES_USEC() to timex.h and time.c
+ *
+ * Revision 1.2 2000/11/01 13:41:04 johana
+ * Clean up and bugfixes.
+ * Created new do_gettimeofday_fast() that gets a timeval struct
+ * with time based on jiffies and *R_TIMER0_DATA, uses a table
+ * for fast conversion of timer value to microseconds.
+ * (Much faster the standard do_gettimeofday() and we don't really
+ * wan't to use the true time - we wan't the "uptime" so timers don't screw up
+ * when we change the time.
+ * TODO: Add efficient support for continuous timers as well.
+ *
+ * Revision 1.1 2000/10/26 15:49:16 johana
+ * Added fasttimer, highresolution timers.
+ *
+ * Copyright (C) 2000,2001 2002 Axis Communications AB, Lund, Sweden
+ */
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/vmalloc.h>
+#include <linux/interrupt.h>
+#include <linux/time.h>
+#include <linux/delay.h>
+
+#include <asm/segment.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/delay.h>
+#include <asm/rtc.h>
+
+#include <linux/config.h>
+#include <linux/version.h>
+
+#include <asm/arch/svinto.h>
+#include <asm/fasttimer.h>
+#include <linux/proc_fs.h>
+
+
+#define DEBUG_LOG_INCLUDED
+#define FAST_TIMER_LOG
+//#define FAST_TIMER_TEST
+
+#define FAST_TIMER_SANITY_CHECKS
+
+#ifdef FAST_TIMER_SANITY_CHECKS
+#define SANITYCHECK(x) x
+static int sanity_failed = 0;
+#else
+#define SANITYCHECK(x)
+#endif
+
+#define D1(x)
+#define D2(x)
+#define DP(x)
+
+#define __INLINE__ inline
+
+static int fast_timer_running = 0;
+static int fast_timers_added = 0;
+static int fast_timers_started = 0;
+static int fast_timers_expired = 0;
+static int fast_timers_deleted = 0;
+static int fast_timer_is_init = 0;
+static int fast_timer_ints = 0;
+
+struct fast_timer *fast_timer_list = NULL;
+
+#ifdef DEBUG_LOG_INCLUDED
+#define DEBUG_LOG_MAX 128
+static const char * debug_log_string[DEBUG_LOG_MAX];
+static unsigned long debug_log_value[DEBUG_LOG_MAX];
+static int debug_log_cnt = 0;
+static int debug_log_cnt_wrapped = 0;
+
+#define DEBUG_LOG(string, value) \
+{ \
+ unsigned long log_flags; \
+ save_flags(log_flags); \
+ cli(); \
+ debug_log_string[debug_log_cnt] = (string); \
+ debug_log_value[debug_log_cnt] = (unsigned long)(value); \
+ if (++debug_log_cnt >= DEBUG_LOG_MAX) \
+ { \
+ debug_log_cnt = debug_log_cnt % DEBUG_LOG_MAX; \
+ debug_log_cnt_wrapped = 1; \
+ } \
+ restore_flags(log_flags); \
+}
+#else
+#define DEBUG_LOG(string, value)
+#endif
+
+
+/* The frequencies for index = clkselx number in R_TIMER_CTRL */
+#define NUM_TIMER_FREQ 15
+#define MAX_USABLE_TIMER_FREQ 7
+#define MAX_DELAY_US 853333L
+const unsigned long timer_freq_100[NUM_TIMER_FREQ] =
+{
+ 3, /* 0 3333 - 853333 us */
+ 6, /* 1 1666 - 426666 us */
+ 12, /* 2 833 - 213333 us */
+ 24, /* 3 416 - 106666 us */
+ 48, /* 4 208 - 53333 us */
+ 96, /* 5 104 - 26666 us */
+ 192, /* 6 52 - 13333 us */
+ 384, /* 7 26 - 6666 us */
+ 576,
+ 1152,
+ 2304,
+ 4608,
+ 9216,
+ 18432,
+ 62500,
+ /* 15 = cascade */
+};
+#define NUM_TIMER_STATS 16
+#ifdef FAST_TIMER_LOG
+struct fast_timer timer_added_log[NUM_TIMER_STATS];
+struct fast_timer timer_started_log[NUM_TIMER_STATS];
+struct fast_timer timer_expired_log[NUM_TIMER_STATS];
+#endif
+
+int timer_div_settings[NUM_TIMER_STATS];
+int timer_freq_settings[NUM_TIMER_STATS];
+int timer_delay_settings[NUM_TIMER_STATS];
+
+/* Not true gettimeofday, only checks the jiffies (uptime) + useconds */
+void __INLINE__ do_gettimeofday_fast(struct timeval *tv)
+{
+ unsigned long sec = jiffies;
+ unsigned long usec = GET_JIFFIES_USEC();
+
+ usec += (sec % HZ) * (1000000 / HZ);
+ sec = sec / HZ;
+
+ if (usec > 1000000)
+ {
+ usec -= 1000000;
+ sec++;
+ }
+ tv->tv_sec = sec;
+ tv->tv_usec = usec;
+}
+
+int __INLINE__ timeval_cmp(struct timeval *t0, struct timeval *t1)
+{
+ if (t0->tv_sec < t1->tv_sec)
+ {
+ return -1;
+ }
+ else if (t0->tv_sec > t1->tv_sec)
+ {
+ return 1;
+ }
+ if (t0->tv_usec < t1->tv_usec)
+ {
+ return -1;
+ }
+ else if (t0->tv_usec > t1->tv_usec)
+ {
+ return 1;
+ }
+ return 0;
+}
+
+void __INLINE__ start_timer1(unsigned long delay_us)
+{
+ int freq_index = 0; /* This is the lowest resolution */
+ unsigned long upper_limit = MAX_DELAY_US;
+
+ unsigned long div;
+ /* Start/Restart the timer to the new shorter value */
+ /* t = 1/freq = 1/19200 = 53us
+ * T=div*t, div = T/t = delay_us*freq/1000000
+ */
+#if 1 /* Adaptive timer settings */
+ while (delay_us < upper_limit && freq_index < MAX_USABLE_TIMER_FREQ)
+ {
+ freq_index++;
+ upper_limit >>= 1; /* Divide by 2 using shift */
+ }
+ if (freq_index > 0)
+ {
+ freq_index--;
+ }
+#else
+ freq_index = 6;
+#endif
+ div = delay_us * timer_freq_100[freq_index]/10000;
+ if (div < 2)
+ {
+ /* Maybe increase timer freq? */
+ div = 2;
+ }
+ if (div > 255)
+ {
+ div = 0; /* This means 256, the max the timer takes */
+ /* If a longer timeout than the timer can handle is used,
+ * then we must restart it when it goes off.
+ */
+ }
+
+ timer_div_settings[fast_timers_started % NUM_TIMER_STATS] = div;
+ timer_freq_settings[fast_timers_started % NUM_TIMER_STATS] = freq_index;
+ timer_delay_settings[fast_timers_started % NUM_TIMER_STATS] = delay_us;
+
+ D1(printk("start_timer1 : %d us freq: %i div: %i\n",
+ delay_us, freq_index, div));
+ /* Clear timer1 irq */
+ *R_IRQ_MASK0_CLR = IO_STATE(R_IRQ_MASK0_CLR, timer1, clr);
+
+ /* Set timer values */
+ *R_TIMER_CTRL = r_timer_ctrl_shadow =
+ (r_timer_ctrl_shadow &
+ ~IO_MASK(R_TIMER_CTRL, timerdiv1) &
+ ~IO_MASK(R_TIMER_CTRL, tm1) &
+ ~IO_MASK(R_TIMER_CTRL, clksel1)) |
+ IO_FIELD(R_TIMER_CTRL, timerdiv1, div) |
+ IO_STATE(R_TIMER_CTRL, tm1, stop_ld) |
+ IO_FIELD(R_TIMER_CTRL, clksel1, freq_index ); /* 6=c19k2Hz */
+
+ /* Ack interrupt */
+ *R_TIMER_CTRL = r_timer_ctrl_shadow |
+ IO_STATE(R_TIMER_CTRL, i1, clr);
+
+ /* Start timer */
+ *R_TIMER_CTRL = r_timer_ctrl_shadow =
+ (r_timer_ctrl_shadow & ~IO_MASK(R_TIMER_CTRL, tm1)) |
+ IO_STATE(R_TIMER_CTRL, tm1, run);
+
+ /* Enable timer1 irq */
+ *R_IRQ_MASK0_SET = IO_STATE(R_IRQ_MASK0_SET, timer1, set);
+ fast_timers_started++;
+ fast_timer_running = 1;
+}
+
+/* In version 1.4 this function takes 27 - 50 us */
+void start_one_shot_timer(struct fast_timer *t,
+ fast_timer_function_type *function,
+ unsigned long data,
+ unsigned long delay_us,
+ const char *name)
+{
+ unsigned long flags;
+ struct fast_timer *tmp;
+
+ D1(printk("sft %s %d us\n", name, delay_us));
+
+ save_flags(flags);
+ cli();
+
+ do_gettimeofday_fast(&t->tv_set);
+ tmp = fast_timer_list;
+
+ SANITYCHECK({ /* Check so this is not in the list already... */
+ while (tmp != NULL)
+ {
+ if (tmp == t)
+ {
+ printk(KERN_WARNING
+ "timer name: %s data: 0x%08lX already in list!\n", name, data);
+ sanity_failed++;
+ return;
+ }
+ else
+ {
+ tmp = tmp->next;
+ }
+ }
+ tmp = fast_timer_list;
+ });
+
+ t->delay_us = delay_us;
+ t->function = function;
+ t->data = data;
+ t->name = name;
+
+ t->tv_expires.tv_usec = t->tv_set.tv_usec + delay_us % 1000000;
+ t->tv_expires.tv_sec = t->tv_set.tv_sec + delay_us / 1000000;
+ if (t->tv_expires.tv_usec > 1000000)
+ {
+ t->tv_expires.tv_usec -= 1000000;
+ t->tv_expires.tv_sec++;
+ }
+#ifdef FAST_TIMER_LOG
+ timer_added_log[fast_timers_added % NUM_TIMER_STATS] = *t;
+#endif
+ fast_timers_added++;
+
+ /* Check if this should timeout before anything else */
+ if (tmp == NULL || timeval_cmp(&t->tv_expires, &tmp->tv_expires) < 0)
+ {
+ /* Put first in list and modify the timer value */
+ t->prev = NULL;
+ t->next = fast_timer_list;
+ if (fast_timer_list)
+ {
+ fast_timer_list->prev = t;
+ }
+ fast_timer_list = t;
+#ifdef FAST_TIMER_LOG
+ timer_started_log[fast_timers_started % NUM_TIMER_STATS] = *t;
+#endif
+ start_timer1(delay_us);
+ } else {
+ /* Put in correct place in list */
+ while (tmp->next &&
+ timeval_cmp(&t->tv_expires, &tmp->next->tv_expires) > 0)
+ {
+ tmp = tmp->next;
+ }
+ /* Insert t after tmp */
+ t->prev = tmp;
+ t->next = tmp->next;
+ if (tmp->next)
+ {
+ tmp->next->prev = t;
+ }
+ tmp->next = t;
+ }
+
+ D2(printk("start_one_shot_timer: %d us done\n", delay_us));
+
+ restore_flags(flags);
+} /* start_one_shot_timer */
+
+static inline int fast_timer_pending (const struct fast_timer * t)
+{
+ return (t->next != NULL) || (t->prev != NULL) || (t == fast_timer_list);
+}
+
+static inline int detach_fast_timer (struct fast_timer *t)
+{
+ struct fast_timer *next, *prev;
+ if (!fast_timer_pending(t))
+ return 0;
+ next = t->next;
+ prev = t->prev;
+ if (next)
+ next->prev = prev;
+ if (prev)
+ prev->next = next;
+ else
+ fast_timer_list = next;
+ fast_timers_deleted++;
+ return 1;
+}
+
+int del_fast_timer(struct fast_timer * t)
+{
+ unsigned long flags;
+ int ret;
+
+ save_flags(flags);
+ cli();
+ ret = detach_fast_timer(t);
+ t->next = t->prev = NULL;
+ restore_flags(flags);
+ return ret;
+} /* del_fast_timer */
+
+
+/* Interrupt routines or functions called in interrupt context */
+
+/* Timer 1 interrupt handler */
+
+static irqreturn_t
+timer1_handler(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct fast_timer *t;
+ unsigned long flags;
+
+ save_flags(flags);
+ cli();
+
+ /* Clear timer1 irq */
+ *R_IRQ_MASK0_CLR = IO_STATE(R_IRQ_MASK0_CLR, timer1, clr);
+
+ /* First stop timer, then ack interrupt */
+ /* Stop timer */
+ *R_TIMER_CTRL = r_timer_ctrl_shadow =
+ (r_timer_ctrl_shadow & ~IO_MASK(R_TIMER_CTRL, tm1)) |
+ IO_STATE(R_TIMER_CTRL, tm1, stop_ld);
+
+ /* Ack interrupt */
+ *R_TIMER_CTRL = r_timer_ctrl_shadow | IO_STATE(R_TIMER_CTRL, i1, clr);
+
+ fast_timer_running = 0;
+ fast_timer_ints++;
+
+ restore_flags(flags);
+
+ t = fast_timer_list;
+ while (t)
+ {
+ struct timeval tv;
+
+ /* Has it really expired? */
+ do_gettimeofday_fast(&tv);
+ D1(printk("t: %is %06ius\n", tv.tv_sec, tv.tv_usec));
+
+ if (timeval_cmp(&t->tv_expires, &tv) <= 0)
+ {
+ /* Yes it has expired */
+#ifdef FAST_TIMER_LOG
+ timer_expired_log[fast_timers_expired % NUM_TIMER_STATS] = *t;
+#endif
+ fast_timers_expired++;
+
+ /* Remove this timer before call, since it may reuse the timer */
+ save_flags(flags);
+ cli();
+ if (t->prev)
+ {
+ t->prev->next = t->next;
+ }
+ else
+ {
+ fast_timer_list = t->next;
+ }
+ if (t->next)
+ {
+ t->next->prev = t->prev;
+ }
+ t->prev = NULL;
+ t->next = NULL;
+ restore_flags(flags);
+
+ if (t->function != NULL)
+ {
+ t->function(t->data);
+ }
+ else
+ {
+ DEBUG_LOG("!timer1 %i function==NULL!\n", fast_timer_ints);
+ }
+ }
+ else
+ {
+ /* Timer is to early, let's set it again using the normal routines */
+ D1(printk(".\n"));
+ }
+
+ save_flags(flags);
+ cli();
+ if ((t = fast_timer_list) != NULL)
+ {
+ /* Start next timer.. */
+ long us;
+ struct timeval tv;
+
+ do_gettimeofday_fast(&tv);
+ us = ((t->tv_expires.tv_sec - tv.tv_sec) * 1000000 +
+ t->tv_expires.tv_usec - tv.tv_usec);
+ if (us > 0)
+ {
+ if (!fast_timer_running)
+ {
+#ifdef FAST_TIMER_LOG
+ timer_started_log[fast_timers_started % NUM_TIMER_STATS] = *t;
+#endif
+ start_timer1(us);
+ }
+ restore_flags(flags);
+ break;
+ }
+ else
+ {
+ /* Timer already expired, let's handle it better late than never.
+ * The normal loop handles it
+ */
+ D1(printk("e! %d\n", us));
+ }
+ }
+ restore_flags(flags);
+ }
+
+ if (!t)
+ {
+ D1(printk("t1 stop!\n"));
+ }
+
+ return IRQ_HANDLED;
+}
+
+static void wake_up_func(unsigned long data)
+{
+#ifdef DECLARE_WAITQUEUE
+ wait_queue_head_t *sleep_wait_p = (wait_queue_head_t*)data;
+#else
+ struct wait_queue **sleep_wait_p = (struct wait_queue **)data;
+#endif
+ wake_up(sleep_wait_p);
+}
+
+
+/* Useful API */
+
+void schedule_usleep(unsigned long us)
+{
+ struct fast_timer t;
+#ifdef DECLARE_WAITQUEUE
+ wait_queue_head_t sleep_wait;
+ init_waitqueue_head(&sleep_wait);
+ {
+ DECLARE_WAITQUEUE(wait, current);
+#else
+ struct wait_queue *sleep_wait = NULL;
+ struct wait_queue wait = { current, NULL };
+#endif
+
+ D1(printk("schedule_usleep(%d)\n", us));
+ add_wait_queue(&sleep_wait, &wait);
+ set_current_state(TASK_INTERRUPTIBLE);
+ start_one_shot_timer(&t, wake_up_func, (unsigned long)&sleep_wait, us,
+ "usleep");
+ schedule();
+ set_current_state(TASK_RUNNING);
+ remove_wait_queue(&sleep_wait, &wait);
+ D1(printk("done schedule_usleep(%d)\n", us));
+#ifdef DECLARE_WAITQUEUE
+ }
+#endif
+}
+
+#ifdef CONFIG_PROC_FS
+static int proc_fasttimer_read(char *buf, char **start, off_t offset, int len
+ ,int *eof, void *data_unused);
+static struct proc_dir_entry *fasttimer_proc_entry;
+#endif /* CONFIG_PROC_FS */
+
+#ifdef CONFIG_PROC_FS
+
+/* This value is very much based on testing */
+#define BIG_BUF_SIZE (500 + NUM_TIMER_STATS * 300)
+
+static int proc_fasttimer_read(char *buf, char **start, off_t offset, int len
+ ,int *eof, void *data_unused)
+{
+ unsigned long flags;
+ int i = 0;
+ int num_to_show;
+ struct timeval tv;
+ struct fast_timer *t, *nextt;
+ static char *bigbuf = NULL;
+ static unsigned long used;
+
+ if (!bigbuf && !(bigbuf = vmalloc(BIG_BUF_SIZE)))
+ {
+ used = 0;
+ bigbuf[0] = '\0';
+ return 0;
+ }
+
+ if (!offset || !used)
+ {
+ do_gettimeofday_fast(&tv);
+
+ used = 0;
+ used += sprintf(bigbuf + used, "Fast timers added: %i\n",
+ fast_timers_added);
+ used += sprintf(bigbuf + used, "Fast timers started: %i\n",
+ fast_timers_started);
+ used += sprintf(bigbuf + used, "Fast timer interrupts: %i\n",
+ fast_timer_ints);
+ used += sprintf(bigbuf + used, "Fast timers expired: %i\n",
+ fast_timers_expired);
+ used += sprintf(bigbuf + used, "Fast timers deleted: %i\n",
+ fast_timers_deleted);
+ used += sprintf(bigbuf + used, "Fast timer running: %s\n",
+ fast_timer_running ? "yes" : "no");
+ used += sprintf(bigbuf + used, "Current time: %lu.%06lu\n",
+ (unsigned long)tv.tv_sec,
+ (unsigned long)tv.tv_usec);
+#ifdef FAST_TIMER_SANITY_CHECKS
+ used += sprintf(bigbuf + used, "Sanity failed: %i\n",
+ sanity_failed);
+#endif
+ used += sprintf(bigbuf + used, "\n");
+
+#ifdef DEBUG_LOG_INCLUDED
+ {
+ int end_i = debug_log_cnt;
+ i = 0;
+
+ if (debug_log_cnt_wrapped)
+ {
+ i = debug_log_cnt;
+ }
+
+ while ((i != end_i || (debug_log_cnt_wrapped && !used)) &&
+ used+100 < BIG_BUF_SIZE)
+ {
+ used += sprintf(bigbuf + used, debug_log_string[i],
+ debug_log_value[i]);
+ i = (i+1) % DEBUG_LOG_MAX;
+ }
+ }
+ used += sprintf(bigbuf + used, "\n");
+#endif
+
+ num_to_show = (fast_timers_started < NUM_TIMER_STATS ? fast_timers_started:
+ NUM_TIMER_STATS);
+ used += sprintf(bigbuf + used, "Timers started: %i\n", fast_timers_started);
+ for (i = 0; i < num_to_show && (used+100 < BIG_BUF_SIZE) ; i++)
+ {
+ int cur = (fast_timers_started - i - 1) % NUM_TIMER_STATS;
+
+#if 1 //ndef FAST_TIMER_LOG
+ used += sprintf(bigbuf + used, "div: %i freq: %i delay: %i"
+ "\n",
+ timer_div_settings[cur],
+ timer_freq_settings[cur],
+ timer_delay_settings[cur]
+ );
+#endif
+#ifdef FAST_TIMER_LOG
+ t = &timer_started_log[cur];
+ used += sprintf(bigbuf + used, "%-14s s: %6lu.%06lu e: %6lu.%06lu "
+ "d: %6li us data: 0x%08lX"
+ "\n",
+ t->name,
+ (unsigned long)t->tv_set.tv_sec,
+ (unsigned long)t->tv_set.tv_usec,
+ (unsigned long)t->tv_expires.tv_sec,
+ (unsigned long)t->tv_expires.tv_usec,
+ t->delay_us,
+ t->data
+ );
+#endif
+ }
+ used += sprintf(bigbuf + used, "\n");
+
+#ifdef FAST_TIMER_LOG
+ num_to_show = (fast_timers_added < NUM_TIMER_STATS ? fast_timers_added:
+ NUM_TIMER_STATS);
+ used += sprintf(bigbuf + used, "Timers added: %i\n", fast_timers_added);
+ for (i = 0; i < num_to_show && (used+100 < BIG_BUF_SIZE); i++)
+ {
+ t = &timer_added_log[(fast_timers_added - i - 1) % NUM_TIMER_STATS];
+ used += sprintf(bigbuf + used, "%-14s s: %6lu.%06lu e: %6lu.%06lu "
+ "d: %6li us data: 0x%08lX"
+ "\n",
+ t->name,
+ (unsigned long)t->tv_set.tv_sec,
+ (unsigned long)t->tv_set.tv_usec,
+ (unsigned long)t->tv_expires.tv_sec,
+ (unsigned long)t->tv_expires.tv_usec,
+ t->delay_us,
+ t->data
+ );
+ }
+ used += sprintf(bigbuf + used, "\n");
+
+ num_to_show = (fast_timers_expired < NUM_TIMER_STATS ? fast_timers_expired:
+ NUM_TIMER_STATS);
+ used += sprintf(bigbuf + used, "Timers expired: %i\n", fast_timers_expired);
+ for (i = 0; i < num_to_show && (used+100 < BIG_BUF_SIZE); i++)
+ {
+ t = &timer_expired_log[(fast_timers_expired - i - 1) % NUM_TIMER_STATS];
+ used += sprintf(bigbuf + used, "%-14s s: %6lu.%06lu e: %6lu.%06lu "
+ "d: %6li us data: 0x%08lX"
+ "\n",
+ t->name,
+ (unsigned long)t->tv_set.tv_sec,
+ (unsigned long)t->tv_set.tv_usec,
+ (unsigned long)t->tv_expires.tv_sec,
+ (unsigned long)t->tv_expires.tv_usec,
+ t->delay_us,
+ t->data
+ );
+ }
+ used += sprintf(bigbuf + used, "\n");
+#endif
+
+ used += sprintf(bigbuf + used, "Active timers:\n");
+ save_flags(flags);
+ cli();
+ t = fast_timer_list;
+ while (t != NULL && (used+100 < BIG_BUF_SIZE))
+ {
+ nextt = t->next;
+ restore_flags(flags);
+ used += sprintf(bigbuf + used, "%-14s s: %6lu.%06lu e: %6lu.%06lu "
+ "d: %6li us data: 0x%08lX"
+/* " func: 0x%08lX" */
+ "\n",
+ t->name,
+ (unsigned long)t->tv_set.tv_sec,
+ (unsigned long)t->tv_set.tv_usec,
+ (unsigned long)t->tv_expires.tv_sec,
+ (unsigned long)t->tv_expires.tv_usec,
+ t->delay_us,
+ t->data
+/* , t->function */
+ );
+ cli();
+ if (t->next != nextt)
+ {
+ printk(KERN_WARNING "timer removed!\n");
+ }
+ t = nextt;
+ }
+ restore_flags(flags);
+ }
+
+ if (used - offset < len)
+ {
+ len = used - offset;
+ }
+
+ memcpy(buf, bigbuf + offset, len);
+ *start = buf;
+ *eof = 1;
+
+ return len;
+}
+#endif /* PROC_FS */
+
+#ifdef FAST_TIMER_TEST
+static volatile unsigned long i = 0;
+static volatile int num_test_timeout = 0;
+static struct fast_timer tr[10];
+static int exp_num[10];
+
+static struct timeval tv_exp[100];
+
+static void test_timeout(unsigned long data)
+{
+ do_gettimeofday_fast(&tv_exp[data]);
+ exp_num[data] = num_test_timeout;
+
+ num_test_timeout++;
+}
+
+static void test_timeout1(unsigned long data)
+{
+ do_gettimeofday_fast(&tv_exp[data]);
+ exp_num[data] = num_test_timeout;
+ if (data < 7)
+ {
+ start_one_shot_timer(&tr[i], test_timeout1, i, 1000, "timeout1");
+ i++;
+ }
+ num_test_timeout++;
+}
+
+DP(
+static char buf0[2000];
+static char buf1[2000];
+static char buf2[2000];
+static char buf3[2000];
+static char buf4[2000];
+);
+
+static char buf5[6000];
+static int j_u[1000];
+
+static void fast_timer_test(void)
+{
+ int prev_num;
+ int j;
+
+ struct timeval tv, tv0, tv1, tv2;
+
+ printk("fast_timer_test() start\n");
+ do_gettimeofday_fast(&tv);
+
+ for (j = 0; j < 1000; j++)
+ {
+ j_u[j] = GET_JIFFIES_USEC();
+ }
+ for (j = 0; j < 100; j++)
+ {
+ do_gettimeofday_fast(&tv_exp[j]);
+ }
+ printk("fast_timer_test() %is %06i\n", tv.tv_sec, tv.tv_usec);
+
+ for (j = 0; j < 1000; j++)
+ {
+ printk("%i %i %i %i %i\n",j_u[j], j_u[j+1], j_u[j+2], j_u[j+3], j_u[j+4]);
+ j += 4;
+ }
+ for (j = 0; j < 100; j++)
+ {
+ printk("%i.%i %i.%i %i.%i %i.%i %i.%i\n",
+ tv_exp[j].tv_sec,tv_exp[j].tv_usec,
+ tv_exp[j+1].tv_sec,tv_exp[j+1].tv_usec,
+ tv_exp[j+2].tv_sec,tv_exp[j+2].tv_usec,
+ tv_exp[j+3].tv_sec,tv_exp[j+3].tv_usec,
+ tv_exp[j+4].tv_sec,tv_exp[j+4].tv_usec);
+ j += 4;
+ }
+ do_gettimeofday_fast(&tv0);
+ start_one_shot_timer(&tr[i], test_timeout, i, 50000, "test0");
+ DP(proc_fasttimer_read(buf0, NULL, 0, 0, 0));
+ i++;
+ start_one_shot_timer(&tr[i], test_timeout, i, 70000, "test1");
+ DP(proc_fasttimer_read(buf1, NULL, 0, 0, 0));
+ i++;
+ start_one_shot_timer(&tr[i], test_timeout, i, 40000, "test2");
+ DP(proc_fasttimer_read(buf2, NULL, 0, 0, 0));
+ i++;
+ start_one_shot_timer(&tr[i], test_timeout, i, 60000, "test3");
+ DP(proc_fasttimer_read(buf3, NULL, 0, 0, 0));
+ i++;
+ start_one_shot_timer(&tr[i], test_timeout1, i, 55000, "test4xx");
+ DP(proc_fasttimer_read(buf4, NULL, 0, 0, 0));
+ i++;
+ do_gettimeofday_fast(&tv1);
+
+ proc_fasttimer_read(buf5, NULL, 0, 0, 0);
+
+ prev_num = num_test_timeout;
+ while (num_test_timeout < i)
+ {
+ if (num_test_timeout != prev_num)
+ {
+ prev_num = num_test_timeout;
+ }
+ }
+ do_gettimeofday_fast(&tv2);
+ printk("Timers started %is %06i\n", tv0.tv_sec, tv0.tv_usec);
+ printk("Timers started at %is %06i\n", tv1.tv_sec, tv1.tv_usec);
+ printk("Timers done %is %06i\n", tv2.tv_sec, tv2.tv_usec);
+ DP(printk("buf0:\n");
+ printk(buf0);
+ printk("buf1:\n");
+ printk(buf1);
+ printk("buf2:\n");
+ printk(buf2);
+ printk("buf3:\n");
+ printk(buf3);
+ printk("buf4:\n");
+ printk(buf4);
+ );
+ printk("buf5:\n");
+ printk(buf5);
+
+ printk("timers set:\n");
+ for(j = 0; j<i; j++)
+ {
+ struct fast_timer *t = &tr[j];
+ printk("%-10s set: %6is %06ius exp: %6is %06ius "
+ "data: 0x%08X func: 0x%08X\n",
+ t->name,
+ t->tv_set.tv_sec,
+ t->tv_set.tv_usec,
+ t->tv_expires.tv_sec,
+ t->tv_expires.tv_usec,
+ t->data,
+ t->function
+ );
+
+ printk(" del: %6ius did exp: %6is %06ius as #%i error: %6li\n",
+ t->delay_us,
+ tv_exp[j].tv_sec,
+ tv_exp[j].tv_usec,
+ exp_num[j],
+ (tv_exp[j].tv_sec - t->tv_expires.tv_sec)*1000000 + tv_exp[j].tv_usec - t->tv_expires.tv_usec);
+ }
+ proc_fasttimer_read(buf5, NULL, 0, 0, 0);
+ printk("buf5 after all done:\n");
+ printk(buf5);
+ printk("fast_timer_test() done\n");
+}
+#endif
+
+
+void fast_timer_init(void)
+{
+ /* For some reason, request_irq() hangs when called froom time_init() */
+ if (!fast_timer_is_init)
+ {
+#if 0 && defined(FAST_TIMER_TEST)
+ int i;
+#endif
+
+ printk(KERN_INFO "fast_timer_init()\n");
+
+#if 0 && defined(FAST_TIMER_TEST)
+ for (i = 0; i <= TIMER0_DIV; i++)
+ {
+ /* We must be careful not to get overflow... */
+ printk("%3i %6u\n", i, timer0_value_us[i]);
+ }
+#endif
+#ifdef CONFIG_PROC_FS
+ if ((fasttimer_proc_entry = create_proc_entry( "fasttimer", 0, 0 )))
+ fasttimer_proc_entry->read_proc = proc_fasttimer_read;
+#endif /* PROC_FS */
+ if(request_irq(TIMER1_IRQ_NBR, timer1_handler, SA_SHIRQ,
+ "fast timer int", NULL))
+ {
+ printk("err: timer1 irq\n");
+ }
+ fast_timer_is_init = 1;
+#ifdef FAST_TIMER_TEST
+ printk("do test\n");
+ fast_timer_test();
+#endif
+ }
+}
diff --git a/arch/cris/arch-v10/kernel/head.S b/arch/cris/arch-v10/kernel/head.S
new file mode 100644
index 00000000000..2c1dd1184a8
--- /dev/null
+++ b/arch/cris/arch-v10/kernel/head.S
@@ -0,0 +1,882 @@
+/* $Id: head.S,v 1.7 2004/05/14 07:58:01 starvik Exp $
+ *
+ * Head of the kernel - alter with care
+ *
+ * Copyright (C) 2000, 2001 Axis Communications AB
+ *
+ * Authors: Bjorn Wesen (bjornw@axis.com)
+ *
+ * $Log: head.S,v $
+ * Revision 1.7 2004/05/14 07:58:01 starvik
+ * Merge of changes from 2.4
+ *
+ * Revision 1.6 2003/04/28 05:31:46 starvik
+ * Added section attributes
+ *
+ * Revision 1.5 2002/12/11 15:42:02 starvik
+ * Extracted v10 (ETRAX 100LX) specific stuff from arch/cris/kernel/*.c
+ *
+ * Revision 1.4 2002/11/07 09:00:44 starvik
+ * Names changed for init sections
+ * init_task_union -> init_thread_union
+ *
+ * Revision 1.3 2002/02/05 15:38:23 bjornw
+ * Oops.. non-CRAMFS_MAGIC should jump over the copying, not into it...
+ *
+ * Revision 1.2 2001/12/18 13:35:19 bjornw
+ * Applied the 2.4.13->2.4.16 CRIS patch to 2.5.1 (is a copy of 2.4.15).
+ *
+ * Revision 1.43 2001/11/08 15:09:43 starvik
+ * Only start MII clock if Ethernet is configured
+ *
+ * Revision 1.42 2001/11/08 14:37:34 starvik
+ * Start MII clock early to make sure that it is running at tranceiver reset
+ *
+ * Revision 1.41 2001/10/29 14:55:58 pkj
+ * Corrected pa$r0 to par0.
+ *
+ * Revision 1.40 2001/10/03 14:59:57 pkj
+ * Added support for resetting the Bluetooth hardware.
+ *
+ * Revision 1.39 2001/10/01 14:45:03 bjornw
+ * Removed underscores and added register prefixes
+ *
+ * Revision 1.38 2001/09/21 07:14:11 jonashg
+ * Made root filesystem (cramfs) use mtdblock driver when booting from flash.
+ *
+ * Revision 1.37 2001/09/11 13:44:29 orjanf
+ * Decouple usage of serial ports for debug and kgdb.
+ *
+ * Revision 1.36 2001/06/29 12:39:31 pkj
+ * Added support for mirroring the first flash to just below the
+ * second one, to make them look consecutive to cramfs.
+ *
+ * Revision 1.35 2001/06/25 14:07:00 hp
+ * Fix review comment.
+ * * head.S: Use IO_STATE, IO_FIELD and IO_MASK constructs instead of
+ * magic numbers. Add comment that -traditional must not be used.
+ * * entry.S (SYMBOL_NAME): Change redefinition to use ## concatenation.
+ * Correct and update comment.
+ * * Makefile (.S.o): Don't use -traditional. Add comment why the
+ * toplevel rule can't be used (now that there's a reason).
+ *
+ * Revision 1.34 2001/05/15 07:08:14 hp
+ * Tweak "notice" to reflect that both r8 r9 are used
+ *
+ * Revision 1.33 2001/05/15 06:40:05 hp
+ * Put bulk of code in .text.init, data in .data.init
+ *
+ * Revision 1.32 2001/05/15 06:18:56 hp
+ * Execute review comment: s/bcc/bhs/g; s/bcs/blo/g
+ *
+ * Revision 1.31 2001/05/15 06:08:40 hp
+ * Add sentence about autodetecting the bit31-MMU-bug
+ *
+ * Revision 1.30 2001/05/15 06:00:05 hp
+ * Update comment: LOW_MAP is not forced on xsim anymore.
+ *
+ * Revision 1.29 2001/04/18 12:51:59 orjanf
+ * * Reverted review change regarding the use of bcs/bcc.
+ * * Removed non-working LED-clearing code.
+ *
+ * Revision 1.28 2001/04/17 13:58:39 orjanf
+ * * Renamed CONFIG_KGDB to CONFIG_ETRAX_KGDB.
+ *
+ * Revision 1.27 2001/04/17 11:42:35 orjanf
+ * Changed according to review:
+ * * Added comment explaining memory map bug.
+ * * Changed bcs and bcc to blo and bhs, respectively.
+ * * Removed mentioning of Stallone and Olga boards.
+ *
+ * Revision 1.26 2001/04/06 12:31:07 jonashg
+ * Check for cramfs in flash before RAM instead of RAM before flash.
+ *
+ * Revision 1.25 2001/04/04 06:23:53 starvik
+ * Initialize DRAM if not already initialized
+ *
+ * Revision 1.24 2001/04/03 11:12:00 starvik
+ * Removed dram init (done by rescue or etrax100boot
+ * Corrected include
+ *
+ * Revision 1.23 2001/04/03 09:53:03 starvik
+ * Include hw_settings.S
+ *
+ * Revision 1.22 2001/03/26 14:23:26 bjornw
+ * Namechange of some config options
+ *
+ * Revision 1.21 2001/03/08 12:14:41 bjornw
+ * * Config name for ETRAX IDE was renamed
+ * * Removed G27 auto-setting when JULIETTE is chosen (need to make this
+ * a new config option later)
+ *
+ * Revision 1.20 2001/02/23 12:47:56 bjornw
+ * MMU regs during LOW_MAP updated to reflect a newer reality
+ *
+ * Revision 1.19 2001/02/19 11:12:07 bjornw
+ * Changed comment header format
+ *
+ * Revision 1.18 2001/02/15 07:25:38 starvik
+ * Added support for synchronous serial ports
+ *
+ * Revision 1.17 2001/02/08 15:53:13 starvik
+ * Last commit removed some important ifdefs
+ *
+ * Revision 1.16 2001/02/08 15:20:38 starvik
+ * Include dram_init.S as inline
+ *
+ * Revision 1.15 2001/01/29 18:12:01 bjornw
+ * Corrected some comments
+ *
+ * Revision 1.14 2001/01/29 13:11:29 starvik
+ * Include dram_init.S (with DRAM/SDRAM initialization)
+ *
+ * Revision 1.13 2001/01/23 14:54:57 markusl
+ * Updated for USB
+ * i.e. added r_gen_config settings
+ *
+ * Revision 1.12 2001/01/19 16:16:29 perf
+ * Added temporary mapping of 0x0c->0x0c to avoid flash loading confusion.
+ * Renamed serial options from ETRAX100 to ETRAX.
+ *
+ * Revision 1.11 2001/01/16 16:31:38 bjornw
+ * * Changed name and semantics of running_from_flash to romfs_in_flash,
+ * set by head.S to indicate to setup.c whether there is a cramfs image
+ * after the kernels BSS or not. Should work for all three boot-cases
+ * (DRAM with cramfs in DRAM, DRAM with cramfs in flash (compressed boot),
+ * and flash with cramfs in flash)
+ *
+ * Revision 1.10 2001/01/16 14:12:21 bjornw
+ * * Check for cramfs start passed in r9 from the decompressor, if all other
+ * cramfs options fail (if we boot from DRAM but don't find a cramfs image
+ * after the kernel in DRAM, it is probably still in the flash)
+ * * Check magic in cramfs detection when booting from flash directly
+ *
+ * Revision 1.9 2001/01/15 17:17:02 bjornw
+ * * Corrected the code that detects the cramfs lengths
+ * * Added a comment saying that the above does not work due to other
+ * reasons..
+ *
+ * Revision 1.8 2001/01/15 16:27:51 jonashg
+ * Made boot after flashing work.
+ * * end destination is __vmlinux_end in RAM.
+ * * _romfs_start moved because of virtual memory.
+ *
+ * Revision 1.7 2000/11/21 13:55:29 bjornw
+ * Use CONFIG_CRIS_LOW_MAP for the low VM map instead of explicit CPU type
+ *
+ * Revision 1.6 2000/10/06 12:36:55 bjornw
+ * Forgot swapper_pg_dir when changing memory map..
+ *
+ * Revision 1.5 2000/10/04 16:49:30 bjornw
+ * * Fixed memory mapping in LX
+ * * Check for cramfs instead of romfs
+ *
+ */
+
+#include <linux/config.h>
+#define ASSEMBLER_MACROS_ONLY
+/* The IO_* macros use the ## token concatenation operator, so
+ -traditional must not be used when assembling this file. */
+#include <asm/arch/sv_addr_ag.h>
+
+#define CRAMFS_MAGIC 0x28cd3d45
+#define RAM_INIT_MAGIC 0x56902387
+
+#define START_ETHERNET_CLOCK IO_STATE(R_NETWORK_GEN_CONFIG, enable, on) |\
+ IO_STATE(R_NETWORK_GEN_CONFIG, phy, mii_clk)
+
+ ;; exported symbols
+
+ .globl etrax_irv
+ .globl romfs_start
+ .globl romfs_length
+ .globl romfs_in_flash
+ .globl swapper_pg_dir
+
+ .text
+
+ ;; This is the entry point of the kernel. We are in supervisor mode.
+ ;; 0x00000000 if Flash, 0x40004000 if DRAM
+ ;; since etrax actually starts at address 2 when booting from flash, we
+ ;; put a nop (2 bytes) here first so we dont accidentally skip the di
+ ;;
+ ;; NOTICE! The registers r8 and r9 are used as parameters carrying
+ ;; information from the decompressor (if the kernel was compressed).
+ ;; They should not be used in the code below until read.
+
+ nop
+ di
+
+ ;; First setup the kseg_c mapping from where the kernel is linked
+ ;; to 0x40000000 (where the actual DRAM resides) otherwise
+ ;; we cannot do very much! See arch/cris/README.mm
+ ;;
+ ;; Notice that since we're potentially running at 0x00 or 0x40 right now,
+ ;; we will get a fault as soon as we enable the MMU if we dont
+ ;; temporarily map those segments linearily.
+ ;;
+ ;; Due to a bug in Etrax-100 LX version 1 we need to map the memory
+ ;; slightly different. The bug is that you can't remap bit 31 of
+ ;; an address. Though we can check the version register for
+ ;; whether the bug is present, some constants would then have to
+ ;; be variables, so we don't. The drawback is that you can "only" map
+ ;; 1G per process with CONFIG_CRIS_LOW_MAP.
+
+#ifdef CONFIG_CRIS_LOW_MAP
+ ; kseg mappings, temporary map of 0xc0->0x40
+ move.d IO_FIELD (R_MMU_KBASE_HI, base_c, 4) \
+ | IO_FIELD (R_MMU_KBASE_HI, base_b, 0xb) \
+ | IO_FIELD (R_MMU_KBASE_HI, base_9, 9) \
+ | IO_FIELD (R_MMU_KBASE_HI, base_8, 8), $r0
+ move.d $r0, [R_MMU_KBASE_HI]
+
+ ; temporary map of 0x40->0x40 and 0x60->0x40
+ move.d IO_FIELD (R_MMU_KBASE_LO, base_6, 4) \
+ | IO_FIELD (R_MMU_KBASE_LO, base_4, 4), $r0
+ move.d $r0, [R_MMU_KBASE_LO]
+
+ ; mmu enable, segs e,c,b,a,6,5,4,0 segment mapped
+ move.d IO_STATE (R_MMU_CONFIG, mmu_enable, enable) \
+ | IO_STATE (R_MMU_CONFIG, inv_excp, enable) \
+ | IO_STATE (R_MMU_CONFIG, acc_excp, enable) \
+ | IO_STATE (R_MMU_CONFIG, we_excp, enable) \
+ | IO_STATE (R_MMU_CONFIG, seg_f, page) \
+ | IO_STATE (R_MMU_CONFIG, seg_e, seg) \
+ | IO_STATE (R_MMU_CONFIG, seg_d, page) \
+ | IO_STATE (R_MMU_CONFIG, seg_c, seg) \
+ | IO_STATE (R_MMU_CONFIG, seg_b, seg) \
+ | IO_STATE (R_MMU_CONFIG, seg_a, seg) \
+ | IO_STATE (R_MMU_CONFIG, seg_9, page) \
+ | IO_STATE (R_MMU_CONFIG, seg_8, page) \
+ | IO_STATE (R_MMU_CONFIG, seg_7, page) \
+ | IO_STATE (R_MMU_CONFIG, seg_6, seg) \
+ | IO_STATE (R_MMU_CONFIG, seg_5, seg) \
+ | IO_STATE (R_MMU_CONFIG, seg_4, seg) \
+ | IO_STATE (R_MMU_CONFIG, seg_3, page) \
+ | IO_STATE (R_MMU_CONFIG, seg_2, page) \
+ | IO_STATE (R_MMU_CONFIG, seg_1, page) \
+ | IO_STATE (R_MMU_CONFIG, seg_0, seg), $r0
+ move.d $r0, [R_MMU_CONFIG]
+#else
+ ; kseg mappings
+ move.d IO_FIELD (R_MMU_KBASE_HI, base_e, 8) \
+ | IO_FIELD (R_MMU_KBASE_HI, base_c, 4) \
+ | IO_FIELD (R_MMU_KBASE_HI, base_b, 0xb), $r0
+ move.d $r0, [R_MMU_KBASE_HI]
+
+ ; temporary map of 0x40->0x40 and 0x00->0x00
+ move.d IO_FIELD (R_MMU_KBASE_LO, base_4, 4), $r0
+ move.d $r0, [R_MMU_KBASE_LO]
+
+ ; mmu enable, segs f,e,c,b,4,0 segment mapped
+ move.d IO_STATE (R_MMU_CONFIG, mmu_enable, enable) \
+ | IO_STATE (R_MMU_CONFIG, inv_excp, enable) \
+ | IO_STATE (R_MMU_CONFIG, acc_excp, enable) \
+ | IO_STATE (R_MMU_CONFIG, we_excp, enable) \
+ | IO_STATE (R_MMU_CONFIG, seg_f, seg) \
+ | IO_STATE (R_MMU_CONFIG, seg_e, seg) \
+ | IO_STATE (R_MMU_CONFIG, seg_d, page) \
+ | IO_STATE (R_MMU_CONFIG, seg_c, seg) \
+ | IO_STATE (R_MMU_CONFIG, seg_b, seg) \
+ | IO_STATE (R_MMU_CONFIG, seg_a, page) \
+ | IO_STATE (R_MMU_CONFIG, seg_9, page) \
+ | IO_STATE (R_MMU_CONFIG, seg_8, page) \
+ | IO_STATE (R_MMU_CONFIG, seg_7, page) \
+ | IO_STATE (R_MMU_CONFIG, seg_6, page) \
+ | IO_STATE (R_MMU_CONFIG, seg_5, page) \
+ | IO_STATE (R_MMU_CONFIG, seg_4, seg) \
+ | IO_STATE (R_MMU_CONFIG, seg_3, page) \
+ | IO_STATE (R_MMU_CONFIG, seg_2, page) \
+ | IO_STATE (R_MMU_CONFIG, seg_1, page) \
+ | IO_STATE (R_MMU_CONFIG, seg_0, seg), $r0
+ move.d $r0, [R_MMU_CONFIG]
+#endif
+
+ ;; Now we need to sort out the segments and their locations in RAM or
+ ;; Flash. The image in the Flash (or in DRAM) consists of 3 pieces:
+ ;; 1) kernel text, 2) kernel data, 3) ROM filesystem image
+ ;; But the linker has linked the kernel to expect this layout in
+ ;; DRAM memory:
+ ;; 1) kernel text, 2) kernel data, 3) kernel BSS
+ ;; (the location of the ROM filesystem is determined by the krom driver)
+ ;; If we boot this from Flash, we want to keep the ROM filesystem in
+ ;; the flash, we want to copy the text and need to copy the data to DRAM.
+ ;; But if we boot from DRAM, we need to move the ROMFS image
+ ;; from its position after kernel data, to after kernel BSS, BEFORE the
+ ;; kernel starts using the BSS area (since its "overlayed" with the ROMFS)
+ ;;
+ ;; In both cases, we start in un-cached mode, and need to jump into a
+ ;; cached PC after we're done fiddling around with the segments.
+ ;;
+ ;; arch/etrax100/etrax100.ld sets some symbols that define the start
+ ;; and end of each segment.
+
+ ;; Check if we start from DRAM or FLASH by testing PC
+
+ move.d $pc,$r0
+ and.d 0x7fffffff,$r0 ; get rid of the non-cache bit
+ cmp.d 0x10000,$r0 ; arbitrary... just something above this code
+ blo _inflash0
+ nop
+
+ jump _inram ; enter cached ram
+
+ ;; Jumpgate for branches.
+_inflash0:
+ jump _inflash
+
+ ;; Put this in a suitable section where we can reclaim storage
+ ;; after init.
+ .section ".init.text", "ax"
+_inflash:
+#ifdef CONFIG_ETRAX_ETHERNET
+ ;; Start MII clock to make sure it is running when tranceiver is reset
+ move.d START_ETHERNET_CLOCK, $r0
+ move.d $r0, [R_NETWORK_GEN_CONFIG]
+#endif
+
+ ;; Set up waitstates etc according to kernel configuration.
+#ifndef CONFIG_SVINTO_SIM
+ move.d CONFIG_ETRAX_DEF_R_WAITSTATES, $r0
+ move.d $r0, [R_WAITSTATES]
+
+ move.d CONFIG_ETRAX_DEF_R_BUS_CONFIG, $r0
+ move.d $r0, [R_BUS_CONFIG]
+#endif
+
+ ;; We need to initialze DRAM registers before we start using the DRAM
+
+ cmp.d RAM_INIT_MAGIC, $r8 ; Already initialized?
+ beq _dram_init_finished
+ nop
+
+#include "../lib/dram_init.S"
+
+_dram_init_finished:
+ ;; Copy text+data to DRAM
+ ;; This is fragile - the calculation of r4 as the image size depends
+ ;; on that the labels below actually are the first and last positions
+ ;; in the linker-script.
+ ;;
+ ;; Then the locating of the cramfs image depends on the aforementioned
+ ;; image being located in the flash at 0. This is most often not true,
+ ;; thus the following does not work (normally there is a rescue-block
+ ;; between the physical start of the flash and the flash-image start,
+ ;; and when run with compression, the kernel is actually unpacked to
+ ;; DRAM and we never get here in the first place :))
+
+ moveq 0, $r0 ; source
+ move.d text_start, $r1 ; destination
+ move.d __vmlinux_end, $r2 ; end destination
+ move.d $r2, $r4
+ sub.d $r1, $r4 ; r4=__vmlinux_end in flash, used below
+1: move.w [$r0+], $r3
+ move.w $r3, [$r1+]
+ cmp.d $r2, $r1
+ blo 1b
+ nop
+
+ ;; We keep the cramfs in the flash.
+ ;; There might be none, but that does not matter because
+ ;; we don't do anything than read some bytes here.
+
+ moveq 0, $r0
+ move.d $r0, [romfs_length] ; default if there is no cramfs
+
+ move.d [$r4], $r0 ; cramfs_super.magic
+ cmp.d CRAMFS_MAGIC, $r0
+ bne 1f
+ nop
+ move.d [$r4 + 4], $r0 ; cramfs_super.size
+ move.d $r0, [romfs_length]
+#ifdef CONFIG_CRIS_LOW_MAP
+ add.d 0x50000000, $r4 ; add flash start in virtual memory (cached)
+#else
+ add.d 0xf0000000, $r4 ; add flash start in virtual memory (cached)
+#endif
+ move.d $r4, [romfs_start]
+1:
+ moveq 1, $r0
+ move.d $r0, [romfs_in_flash]
+
+ jump _start_it ; enter code, cached this time
+
+_inram:
+ ;; Move the ROM fs to after BSS end. This assumes that the cramfs
+ ;; second longword contains the length of the cramfs
+
+ moveq 0, $r0
+ move.d $r0, [romfs_length] ; default if there is no cramfs
+
+ ;; The kernel could have been unpacked to DRAM by the loader, but
+ ;; the cramfs image could still be in the Flash directly after the
+ ;; compressed kernel image. The loader passes the address of the
+ ;; byte succeeding the last compressed byte in the flash in the
+ ;; register r9 when starting the kernel. Check if r9 points to a
+ ;; decent cramfs image!
+ ;; (Notice that if this is not booted from the loader, r9 will be
+ ;; garbage but we do sanity checks on it, the chance that it points
+ ;; to a cramfs magic is small.. )
+
+ cmp.d 0x0ffffff8, $r9
+ bhs _no_romfs_in_flash ; r9 points outside the flash area
+ nop
+ move.d [$r9], $r0 ; cramfs_super.magic
+ cmp.d CRAMFS_MAGIC, $r0
+ bne _no_romfs_in_flash
+ nop
+ move.d [$r9+4], $r0 ; cramfs_super.length
+ move.d $r0, [romfs_length]
+#ifdef CONFIG_CRIS_LOW_MAP
+ add.d 0x50000000, $r9 ; add flash start in virtual memory (cached)
+#else
+ add.d 0xf0000000, $r9 ; add flash start in virtual memory (cached)
+#endif
+ move.d $r9, [romfs_start]
+
+ moveq 1, $r0
+ move.d $r0, [romfs_in_flash]
+
+ jump _start_it ; enter code, cached this time
+
+_no_romfs_in_flash:
+
+ ;; Check if there is a cramfs (magic value).
+ ;; Notice that we check for cramfs magic value - which is
+ ;; the "rom fs" we'll possibly use in 2.4 if not JFFS (which does
+ ;; not need this mechanism anyway)
+
+ move.d __vmlinux_end, $r0; the image will be after the vmlinux end address
+ move.d [$r0], $r1 ; cramfs assumes same endian on host/target
+ cmp.d CRAMFS_MAGIC, $r1; magic value in cramfs superblock
+ bne 2f
+ nop
+
+ ;; Ok. What is its size ?
+
+ move.d [$r0 + 4], $r2 ; cramfs_super.size (again, no need to swapwb)
+
+ ;; We want to copy it to the end of the BSS
+
+ move.d _end, $r1
+
+ ;; Remember values so cramfs and setup can find this info
+
+ move.d $r1, [romfs_start] ; new romfs location
+ move.d $r2, [romfs_length]
+
+ ;; We need to copy it backwards, since they can be overlapping
+
+ add.d $r2, $r0
+ add.d $r2, $r1
+
+ ;; Go ahead. Make my loop.
+
+ lsrq 1, $r2 ; size is in bytes, we copy words
+
+1: move.w [$r0=$r0-2],$r3
+ move.w $r3,[$r1=$r1-2]
+ subq 1, $r2
+ bne 1b
+ nop
+
+2:
+ ;; Dont worry that the BSS is tainted. It will be cleared later.
+
+ moveq 0, $r0
+ move.d $r0, [romfs_in_flash]
+
+ jump _start_it ; better skip the additional cramfs check below
+
+_start_it:
+
+ ;; the kernel stack is overlayed with the task structure for each
+ ;; task. thus the initial kernel stack is in the same page as the
+ ;; init_task (but starts in the top of the page, size 8192)
+ move.d init_thread_union + 8192, $sp
+ move.d ibr_start,$r0 ; this symbol is set by the linker script
+ move $r0,$ibr
+ move.d $r0,[etrax_irv] ; set the interrupt base register and pointer
+
+ ;; Clear BSS region, from _bss_start to _end
+
+ move.d __bss_start, $r0
+ move.d _end, $r1
+1: clear.d [$r0+]
+ cmp.d $r1, $r0
+ blo 1b
+ nop
+
+#ifdef CONFIG_BLK_DEV_ETRAXIDE
+ ;; disable ATA before enabling it in genconfig below
+ moveq 0,$r0
+ move.d $r0,[R_ATA_CTRL_DATA]
+ move.d $r0,[R_ATA_TRANSFER_CNT]
+ move.d $r0,[R_ATA_CONFIG]
+#if 0
+ move.d R_PORT_G_DATA, $r1
+ move.d $r0, [$r1]; assert ATA bus-reset
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ move.d 0x08000000,$r0
+ move.d $r0,[$r1]
+#endif
+#endif
+
+#ifdef CONFIG_JULIETTE
+ ;; configure external DMA channel 0 before enabling it in genconfig
+
+ moveq 0,$r0
+ move.d $r0,[R_EXT_DMA_0_ADDR]
+ ; cnt enable, word size, output, stop, size 0
+ move.d IO_STATE (R_EXT_DMA_0_CMD, cnt, enable) \
+ | IO_STATE (R_EXT_DMA_0_CMD, rqpol, ahigh) \
+ | IO_STATE (R_EXT_DMA_0_CMD, apol, ahigh) \
+ | IO_STATE (R_EXT_DMA_0_CMD, rq_ack, burst) \
+ | IO_STATE (R_EXT_DMA_0_CMD, wid, word) \
+ | IO_STATE (R_EXT_DMA_0_CMD, dir, output) \
+ | IO_STATE (R_EXT_DMA_0_CMD, run, stop) \
+ | IO_FIELD (R_EXT_DMA_0_CMD, trf_count, 0),$r0
+ move.d $r0,[R_EXT_DMA_0_CMD]
+
+ ;; reset dma4 and wait for completion
+
+ moveq IO_STATE (R_DMA_CH4_CMD, cmd, reset),$r0
+ move.b $r0,[R_DMA_CH4_CMD]
+1: move.b [R_DMA_CH4_CMD],$r0
+ and.b IO_MASK (R_DMA_CH4_CMD, cmd),$r0
+ cmp.b IO_STATE (R_DMA_CH4_CMD, cmd, reset),$r0
+ beq 1b
+ nop
+
+ ;; reset dma5 and wait for completion
+
+ moveq IO_STATE (R_DMA_CH5_CMD, cmd, reset),$r0
+ move.b $r0,[R_DMA_CH5_CMD]
+1: move.b [R_DMA_CH5_CMD],$r0
+ and.b IO_MASK (R_DMA_CH5_CMD, cmd),$r0
+ cmp.b IO_STATE (R_DMA_CH5_CMD, cmd, reset),$r0
+ beq 1b
+ nop
+#endif
+
+ ;; Etrax product HW genconfig setup
+
+ moveq 0,$r0
+#if (!defined(CONFIG_ETRAX_KGDB) || !defined(CONFIG_ETRAX_DEBUG_PORT0)) \
+ && !defined(CONFIG_DMA_MEMCPY)
+ ; DMA channels 6 and 7 to ser0, kgdb doesnt want DMA
+ or.d IO_STATE (R_GEN_CONFIG, dma7, serial0) \
+ | IO_STATE (R_GEN_CONFIG, dma6, serial0),$r0
+#endif
+#if !defined(CONFIG_ETRAX_KGDB) || !defined(CONFIG_ETRAX_DEBUG_PORT1)
+ ; DMA channels 8 and 9 to ser1, kgdb doesnt want DMA
+ or.d IO_STATE (R_GEN_CONFIG, dma9, serial1) \
+ | IO_STATE (R_GEN_CONFIG, dma8, serial1),$r0
+#endif
+#ifdef CONFIG_DMA_MEMCPY
+ ; 6/7 memory-memory DMA
+ or.d IO_STATE (R_GEN_CONFIG, dma7, intdma6) \
+ | IO_STATE (R_GEN_CONFIG, dma6, intdma7),$r0
+#endif
+#ifdef CONFIG_ETRAX_SERIAL_PORT2
+ ; Enable serial port 2
+ or.w IO_STATE (R_GEN_CONFIG, ser2, select),$r0
+#if !defined(CONFIG_ETRAX_KGDB) || !defined(CONFIG_ETRAX_DEBUG_PORT2)
+ ; DMA channels 2 and 3 to ser2, kgdb doesnt want DMA
+ or.d IO_STATE (R_GEN_CONFIG, dma3, serial2) \
+ | IO_STATE (R_GEN_CONFIG, dma2, serial2),$r0
+#endif
+#endif
+#if defined(CONFIG_ETRAX_SERIAL_PORT3) || defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1)
+ ; Enable serial port 3
+ or.w IO_STATE (R_GEN_CONFIG, ser3, select),$r0
+#if !defined(CONFIG_ETRAX_KGDB) || !defined(CONFIG_ETRAX_DEBUG_PORT3)
+ ; DMA channels 4 and 5 to ser3, kgdb doesnt want DMA
+ or.d IO_STATE (R_GEN_CONFIG, dma5, serial3) \
+ | IO_STATE (R_GEN_CONFIG, dma4, serial3),$r0
+#endif
+#endif
+#if defined(CONFIG_ETRAX_PARALLEL_PORT0) || defined(CONFIG_ETRAX_ETHERNET_LPSLAVE)
+ ; parport 0 enabled using DMA 2/3
+ or.w IO_STATE (R_GEN_CONFIG, par0, select),$r0
+#endif
+#if defined(CONFIG_ETRAX_PARALLEL_PORT1) || defined(CONFIG_ETRAX_ETHERNET_LPSLAVE)
+ ; parport 1 enabled using DMA 4/5
+ or.w IO_STATE (R_GEN_CONFIG, par1, select),$r0
+#endif
+#ifdef CONFIG_ETRAX_IDE
+ ; DMA channels 2 and 3 to ATA, ATA enabled
+ or.d IO_STATE (R_GEN_CONFIG, dma3, ata) \
+ | IO_STATE (R_GEN_CONFIG, dma2, ata) \
+ | IO_STATE (R_GEN_CONFIG, ata, select),$r0
+#endif
+
+#ifdef CONFIG_ETRAX_USB_HOST_PORT1
+ ; Set the USB port 1 enable bit
+ or.d IO_STATE (R_GEN_CONFIG, usb1, select),$r0
+#endif
+#ifdef CONFIG_ETRAX_USB_HOST_PORT2
+ ; Set the USB port 2 enable bit
+ or.d IO_STATE (R_GEN_CONFIG, usb2, select),$r0
+#endif
+#ifdef CONFIG_ETRAX_USB_HOST
+ ; Connect DMA channels 8 and 9 to USB
+ and.d (~(IO_MASK (R_GEN_CONFIG, dma9) \
+ | IO_MASK (R_GEN_CONFIG, dma8))) \
+ | IO_STATE (R_GEN_CONFIG, dma9, usb) \
+ | IO_STATE (R_GEN_CONFIG, dma8, usb),$r0
+#endif
+
+#ifdef CONFIG_JULIETTE
+ ; DMA channels 4 and 5 to EXTDMA0, for Juliette
+ or.d IO_STATE (R_GEN_CONFIG, dma5, extdma0) \
+ | IO_STATE (R_GEN_CONFIG, dma4, extdma0),$r0
+#endif
+
+#if defined(CONFIG_ETRAX_DEF_R_PORT_G0_DIR_OUT)
+ or.d IO_STATE (R_GEN_CONFIG, g0dir, out),$r0
+#endif
+
+#if defined(CONFIG_ETRAX_DEF_R_PORT_G8_15_DIR_OUT)
+ or.d IO_STATE (R_GEN_CONFIG, g8_15dir, out),$r0
+#endif
+#if defined(CONFIG_ETRAX_DEF_R_PORT_G16_23_DIR_OUT)
+ or.d IO_STATE (R_GEN_CONFIG, g16_23dir, out),$r0
+#endif
+
+#if defined(CONFIG_ETRAX_DEF_R_PORT_G24_DIR_OUT)
+ or.d IO_STATE (R_GEN_CONFIG, g24dir, out),$r0
+#endif
+
+ move.d $r0,[genconfig_shadow] ; init a shadow register of R_GEN_CONFIG
+
+#ifndef CONFIG_SVINTO_SIM
+ move.d $r0,[R_GEN_CONFIG]
+
+#if 0
+ moveq 4,$r0
+ move.b $r0,[R_DMA_CH6_CMD] ; reset (ser0 dma out)
+ move.b $r0,[R_DMA_CH7_CMD] ; reset (ser0 dma in)
+1: move.b [R_DMA_CH6_CMD],$r0 ; wait for reset cycle to finish
+ and.b 7,$r0
+ cmp.b 4,$r0
+ beq 1b
+ nop
+1: move.b [R_DMA_CH7_CMD],$r0 ; wait for reset cycle to finish
+ and.b 7,$r0
+ cmp.b 4,$r0
+ beq 1b
+ nop
+#endif
+
+ moveq IO_STATE (R_DMA_CH8_CMD, cmd, reset),$r0
+ move.b $r0,[R_DMA_CH8_CMD] ; reset (ser1 dma out)
+ move.b $r0,[R_DMA_CH9_CMD] ; reset (ser1 dma in)
+1: move.b [R_DMA_CH8_CMD],$r0 ; wait for reset cycle to finish
+ andq IO_MASK (R_DMA_CH8_CMD, cmd),$r0
+ cmpq IO_STATE (R_DMA_CH8_CMD, cmd, reset),$r0
+ beq 1b
+ nop
+1: move.b [R_DMA_CH9_CMD],$r0 ; wait for reset cycle to finish
+ andq IO_MASK (R_DMA_CH9_CMD, cmd),$r0
+ cmpq IO_STATE (R_DMA_CH9_CMD, cmd, reset),$r0
+ beq 1b
+ nop
+
+ ;; setup port PA and PB default initial directions and data
+ ;; including their shadow registers
+
+ move.b CONFIG_ETRAX_DEF_R_PORT_PA_DIR,$r0
+#if defined(CONFIG_BLUETOOTH) && defined(CONFIG_BLUETOOTH_RESET_PA7)
+ or.b IO_STATE (R_PORT_PA_DIR, dir7, output),$r0
+#endif
+ move.b $r0,[port_pa_dir_shadow]
+ move.b $r0,[R_PORT_PA_DIR]
+ move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA,$r0
+#if defined(CONFIG_BLUETOOTH) && defined(CONFIG_BLUETOOTH_RESET_PA7)
+#if defined(CONFIG_BLUETOOTH_RESET_ACTIVE_HIGH)
+ and.b ~(1 << 7),$r0
+#else
+ or.b (1 << 7),$r0
+#endif
+#endif
+ move.b $r0,[port_pa_data_shadow]
+ move.b $r0,[R_PORT_PA_DATA]
+
+ move.b CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG,$r0
+ move.b $r0,[port_pb_config_shadow]
+ move.b $r0,[R_PORT_PB_CONFIG]
+ move.b CONFIG_ETRAX_DEF_R_PORT_PB_DIR,$r0
+#if defined(CONFIG_BLUETOOTH) && defined(CONFIG_BLUETOOTH_RESET_PB5)
+ or.b IO_STATE (R_PORT_PB_DIR, dir5, output),$r0
+#endif
+ move.b $r0,[port_pb_dir_shadow]
+ move.b $r0,[R_PORT_PB_DIR]
+ move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA,$r0
+#if defined(CONFIG_BLUETOOTH) && defined(CONFIG_BLUETOOTH_RESET_PB5)
+#if defined(CONFIG_BLUETOOTH_RESET_ACTIVE_HIGH)
+ and.b ~(1 << 5),$r0
+#else
+ or.b (1 << 5),$r0
+#endif
+#endif
+ move.b $r0,[port_pb_data_shadow]
+ move.b $r0,[R_PORT_PB_DATA]
+
+ moveq 0, $r0
+ move.d $r0,[port_pb_i2c_shadow]
+ move.d $r0, [R_PORT_PB_I2C]
+
+ moveq 0,$r0
+#if defined(CONFIG_BLUETOOTH) && defined(CONFIG_BLUETOOTH_RESET_G10)
+#if defined(CONFIG_BLUETOOTH_RESET_ACTIVE_HIGH)
+ and.d ~(1 << 10),$r0
+#else
+ or.d (1 << 10),$r0
+#endif
+#endif
+#if defined(CONFIG_BLUETOOTH) && defined(CONFIG_BLUETOOTH_RESET_G11)
+#if defined(CONFIG_BLUETOOTH_RESET_ACTIVE_HIGH)
+ and.d ~(1 << 11),$r0
+#else
+ or.d (1 << 11),$r0
+#endif
+#endif
+ move.d $r0,[port_g_data_shadow]
+ move.d $r0,[R_PORT_G_DATA]
+
+ ;; setup the serial port 0 at 115200 baud for debug purposes
+
+ moveq IO_STATE (R_SERIAL0_XOFF, tx_stop, enable) \
+ | IO_STATE (R_SERIAL0_XOFF, auto_xoff, disable) \
+ | IO_FIELD (R_SERIAL0_XOFF, xoff_char, 0),$r0
+ move.d $r0,[R_SERIAL0_XOFF]
+
+ ; 115.2kbaud for both transmit and receive
+ move.b IO_STATE (R_SERIAL0_BAUD, tr_baud, c115k2Hz) \
+ | IO_STATE (R_SERIAL0_BAUD, rec_baud, c115k2Hz),$r0
+ move.b $r0,[R_SERIAL0_BAUD]
+
+ ; Set up and enable the serial0 receiver.
+ move.b IO_STATE (R_SERIAL0_REC_CTRL, dma_err, stop) \
+ | IO_STATE (R_SERIAL0_REC_CTRL, rec_enable, enable) \
+ | IO_STATE (R_SERIAL0_REC_CTRL, rts_, active) \
+ | IO_STATE (R_SERIAL0_REC_CTRL, sampling, middle) \
+ | IO_STATE (R_SERIAL0_REC_CTRL, rec_stick_par, normal) \
+ | IO_STATE (R_SERIAL0_REC_CTRL, rec_par, even) \
+ | IO_STATE (R_SERIAL0_REC_CTRL, rec_par_en, disable) \
+ | IO_STATE (R_SERIAL0_REC_CTRL, rec_bitnr, rec_8bit),$r0
+ move.b $r0,[R_SERIAL0_REC_CTRL]
+
+ ; Set up and enable the serial0 transmitter.
+ move.b IO_FIELD (R_SERIAL0_TR_CTRL, txd, 0) \
+ | IO_STATE (R_SERIAL0_TR_CTRL, tr_enable, enable) \
+ | IO_STATE (R_SERIAL0_TR_CTRL, auto_cts, disabled) \
+ | IO_STATE (R_SERIAL0_TR_CTRL, stop_bits, one_bit) \
+ | IO_STATE (R_SERIAL0_TR_CTRL, tr_stick_par, normal) \
+ | IO_STATE (R_SERIAL0_TR_CTRL, tr_par, even) \
+ | IO_STATE (R_SERIAL0_TR_CTRL, tr_par_en, disable) \
+ | IO_STATE (R_SERIAL0_TR_CTRL, tr_bitnr, tr_8bit),$r0
+ move.b $r0,[R_SERIAL0_TR_CTRL]
+
+ ;; setup the serial port 1 at 115200 baud for debug purposes
+
+ moveq IO_STATE (R_SERIAL1_XOFF, tx_stop, enable) \
+ | IO_STATE (R_SERIAL1_XOFF, auto_xoff, disable) \
+ | IO_FIELD (R_SERIAL1_XOFF, xoff_char, 0),$r0
+ move.d $r0,[R_SERIAL1_XOFF]
+
+ ; 115.2kbaud for both transmit and receive
+ move.b IO_STATE (R_SERIAL1_BAUD, tr_baud, c115k2Hz) \
+ | IO_STATE (R_SERIAL1_BAUD, rec_baud, c115k2Hz),$r0
+ move.b $r0,[R_SERIAL1_BAUD]
+
+ ; Set up and enable the serial1 receiver.
+ move.b IO_STATE (R_SERIAL1_REC_CTRL, dma_err, stop) \
+ | IO_STATE (R_SERIAL1_REC_CTRL, rec_enable, enable) \
+ | IO_STATE (R_SERIAL1_REC_CTRL, rts_, active) \
+ | IO_STATE (R_SERIAL1_REC_CTRL, sampling, middle) \
+ | IO_STATE (R_SERIAL1_REC_CTRL, rec_stick_par, normal) \
+ | IO_STATE (R_SERIAL1_REC_CTRL, rec_par, even) \
+ | IO_STATE (R_SERIAL1_REC_CTRL, rec_par_en, disable) \
+ | IO_STATE (R_SERIAL1_REC_CTRL, rec_bitnr, rec_8bit),$r0
+ move.b $r0,[R_SERIAL1_REC_CTRL]
+
+ ; Set up and enable the serial1 transmitter.
+ move.b IO_FIELD (R_SERIAL1_TR_CTRL, txd, 0) \
+ | IO_STATE (R_SERIAL1_TR_CTRL, tr_enable, enable) \
+ | IO_STATE (R_SERIAL1_TR_CTRL, auto_cts, disabled) \
+ | IO_STATE (R_SERIAL1_TR_CTRL, stop_bits, one_bit) \
+ | IO_STATE (R_SERIAL1_TR_CTRL, tr_stick_par, normal) \
+ | IO_STATE (R_SERIAL1_TR_CTRL, tr_par, even) \
+ | IO_STATE (R_SERIAL1_TR_CTRL, tr_par_en, disable) \
+ | IO_STATE (R_SERIAL1_TR_CTRL, tr_bitnr, tr_8bit),$r0
+ move.b $r0,[R_SERIAL1_TR_CTRL]
+
+
+#ifdef CONFIG_ETRAX_SERIAL_PORT3
+ ;; setup the serial port 3 at 115200 baud for debug purposes
+
+ moveq IO_STATE (R_SERIAL3_XOFF, tx_stop, enable) \
+ | IO_STATE (R_SERIAL3_XOFF, auto_xoff, disable) \
+ | IO_FIELD (R_SERIAL3_XOFF, xoff_char, 0),$r0
+ move.d $r0,[R_SERIAL3_XOFF]
+
+ ; 115.2kbaud for both transmit and receive
+ move.b IO_STATE (R_SERIAL3_BAUD, tr_baud, c115k2Hz) \
+ | IO_STATE (R_SERIAL3_BAUD, rec_baud, c115k2Hz),$r0
+ move.b $r0,[R_SERIAL3_BAUD]
+
+ ; Set up and enable the serial3 receiver.
+ move.b IO_STATE (R_SERIAL3_REC_CTRL, dma_err, stop) \
+ | IO_STATE (R_SERIAL3_REC_CTRL, rec_enable, enable) \
+ | IO_STATE (R_SERIAL3_REC_CTRL, rts_, active) \
+ | IO_STATE (R_SERIAL3_REC_CTRL, sampling, middle) \
+ | IO_STATE (R_SERIAL3_REC_CTRL, rec_stick_par, normal) \
+ | IO_STATE (R_SERIAL3_REC_CTRL, rec_par, even) \
+ | IO_STATE (R_SERIAL3_REC_CTRL, rec_par_en, disable) \
+ | IO_STATE (R_SERIAL3_REC_CTRL, rec_bitnr, rec_8bit),$r0
+ move.b $r0,[R_SERIAL3_REC_CTRL]
+
+ ; Set up and enable the serial3 transmitter.
+ move.b IO_FIELD (R_SERIAL3_TR_CTRL, txd, 0) \
+ | IO_STATE (R_SERIAL3_TR_CTRL, tr_enable, enable) \
+ | IO_STATE (R_SERIAL3_TR_CTRL, auto_cts, disabled) \
+ | IO_STATE (R_SERIAL3_TR_CTRL, stop_bits, one_bit) \
+ | IO_STATE (R_SERIAL3_TR_CTRL, tr_stick_par, normal) \
+ | IO_STATE (R_SERIAL3_TR_CTRL, tr_par, even) \
+ | IO_STATE (R_SERIAL3_TR_CTRL, tr_par_en, disable) \
+ | IO_STATE (R_SERIAL3_TR_CTRL, tr_bitnr, tr_8bit),$r0
+ move.b $r0,[R_SERIAL3_TR_CTRL]
+#endif
+
+#endif /* CONFIG_SVINTO_SIM */
+
+ jump start_kernel ; jump into the C-function start_kernel in init/main.c
+
+ .data
+etrax_irv:
+ .dword 0
+romfs_start:
+ .dword 0
+romfs_length:
+ .dword 0
+romfs_in_flash:
+ .dword 0
+
+ ;; put some special pages at the beginning of the kernel aligned
+ ;; to page boundaries - the kernel cannot start until after this
+
+#ifdef CONFIG_CRIS_LOW_MAP
+swapper_pg_dir = 0x60002000
+#else
+swapper_pg_dir = 0xc0002000
+#endif
+
+ .section ".init.data", "aw"
+#include "../lib/hw_settings.S"
diff --git a/arch/cris/arch-v10/kernel/irq.c b/arch/cris/arch-v10/kernel/irq.c
new file mode 100644
index 00000000000..b2f16d6fc87
--- /dev/null
+++ b/arch/cris/arch-v10/kernel/irq.c
@@ -0,0 +1,204 @@
+/* $Id: irq.c,v 1.2 2004/06/09 05:30:27 starvik Exp $
+ *
+ * linux/arch/cris/kernel/irq.c
+ *
+ * Copyright (c) 2000-2002 Axis Communications AB
+ *
+ * Authors: Bjorn Wesen (bjornw@axis.com)
+ *
+ * This file contains the interrupt vectors and some
+ * helper functions
+ *
+ */
+
+#include <asm/irq.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/config.h>
+
+irqvectptr irq_shortcuts[NR_IRQS]; /* vector of shortcut jumps after the irq prologue */
+
+/* don't use set_int_vector, it bypasses the linux interrupt handlers. it is
+ * global just so that the kernel gdb can use it.
+ */
+
+void
+set_int_vector(int n, irqvectptr addr)
+{
+ etrax_irv->v[n + 0x20] = (irqvectptr)addr;
+}
+
+/* the breakpoint vector is obviously not made just like the normal irq handlers
+ * but needs to contain _code_ to jump to addr.
+ *
+ * the BREAK n instruction jumps to IBR + n * 8
+ */
+
+void
+set_break_vector(int n, irqvectptr addr)
+{
+ unsigned short *jinstr = (unsigned short *)&etrax_irv->v[n*2];
+ unsigned long *jaddr = (unsigned long *)(jinstr + 1);
+
+ /* if you don't know what this does, do not touch it! */
+
+ *jinstr = 0x0d3f;
+ *jaddr = (unsigned long)addr;
+
+ /* 00000026 <clrlop+1a> 3f0d82000000 jump 0x82 */
+}
+
+/*
+ * This builds up the IRQ handler stubs using some ugly macros in irq.h
+ *
+ * These macros create the low-level assembly IRQ routines that do all
+ * the operations that are needed. They are also written to be fast - and to
+ * disable interrupts as little as humanly possible.
+ *
+ */
+
+/* IRQ0 and 1 are special traps */
+void hwbreakpoint(void);
+void IRQ1_interrupt(void);
+BUILD_TIMER_IRQ(2, 0x04) /* the timer interrupt is somewhat special */
+BUILD_IRQ(3, 0x08)
+BUILD_IRQ(4, 0x10)
+BUILD_IRQ(5, 0x20)
+BUILD_IRQ(6, 0x40)
+BUILD_IRQ(7, 0x80)
+BUILD_IRQ(8, 0x100)
+BUILD_IRQ(9, 0x200)
+BUILD_IRQ(10, 0x400)
+BUILD_IRQ(11, 0x800)
+BUILD_IRQ(12, 0x1000)
+BUILD_IRQ(13, 0x2000)
+void mmu_bus_fault(void); /* IRQ 14 is the bus fault interrupt */
+void multiple_interrupt(void); /* IRQ 15 is the multiple IRQ interrupt */
+BUILD_IRQ(16, 0x10000)
+BUILD_IRQ(17, 0x20000)
+BUILD_IRQ(18, 0x40000)
+BUILD_IRQ(19, 0x80000)
+BUILD_IRQ(20, 0x100000)
+BUILD_IRQ(21, 0x200000)
+BUILD_IRQ(22, 0x400000)
+BUILD_IRQ(23, 0x800000)
+BUILD_IRQ(24, 0x1000000)
+BUILD_IRQ(25, 0x2000000)
+/* IRQ 26-30 are reserved */
+BUILD_IRQ(31, 0x80000000)
+
+/*
+ * Pointers to the low-level handlers
+ */
+
+static void (*interrupt[NR_IRQS])(void) = {
+ NULL, NULL, IRQ2_interrupt, IRQ3_interrupt,
+ IRQ4_interrupt, IRQ5_interrupt, IRQ6_interrupt, IRQ7_interrupt,
+ IRQ8_interrupt, IRQ9_interrupt, IRQ10_interrupt, IRQ11_interrupt,
+ IRQ12_interrupt, IRQ13_interrupt, NULL, NULL,
+ IRQ16_interrupt, IRQ17_interrupt, IRQ18_interrupt, IRQ19_interrupt,
+ IRQ20_interrupt, IRQ21_interrupt, IRQ22_interrupt, IRQ23_interrupt,
+ IRQ24_interrupt, IRQ25_interrupt, NULL, NULL, NULL, NULL, NULL,
+ IRQ31_interrupt
+};
+
+static void (*bad_interrupt[NR_IRQS])(void) = {
+ NULL, NULL,
+ NULL, bad_IRQ3_interrupt,
+ bad_IRQ4_interrupt, bad_IRQ5_interrupt,
+ bad_IRQ6_interrupt, bad_IRQ7_interrupt,
+ bad_IRQ8_interrupt, bad_IRQ9_interrupt,
+ bad_IRQ10_interrupt, bad_IRQ11_interrupt,
+ bad_IRQ12_interrupt, bad_IRQ13_interrupt,
+ NULL, NULL,
+ bad_IRQ16_interrupt, bad_IRQ17_interrupt,
+ bad_IRQ18_interrupt, bad_IRQ19_interrupt,
+ bad_IRQ20_interrupt, bad_IRQ21_interrupt,
+ bad_IRQ22_interrupt, bad_IRQ23_interrupt,
+ bad_IRQ24_interrupt, bad_IRQ25_interrupt,
+ NULL, NULL, NULL, NULL, NULL,
+ bad_IRQ31_interrupt
+};
+
+void arch_setup_irq(int irq)
+{
+ set_int_vector(irq, interrupt[irq]);
+}
+
+void arch_free_irq(int irq)
+{
+ set_int_vector(irq, bad_interrupt[irq]);
+}
+
+void weird_irq(void);
+void system_call(void); /* from entry.S */
+void do_sigtrap(void); /* from entry.S */
+void gdb_handle_breakpoint(void); /* from entry.S */
+
+/* init_IRQ() is called by start_kernel and is responsible for fixing IRQ masks and
+ setting the irq vector table to point to bad_interrupt ptrs.
+*/
+
+void __init
+init_IRQ(void)
+{
+ int i;
+
+ /* clear all interrupt masks */
+
+#ifndef CONFIG_SVINTO_SIM
+ *R_IRQ_MASK0_CLR = 0xffffffff;
+ *R_IRQ_MASK1_CLR = 0xffffffff;
+ *R_IRQ_MASK2_CLR = 0xffffffff;
+#endif
+
+ *R_VECT_MASK_CLR = 0xffffffff;
+
+ /* clear the shortcut entry points */
+
+ for(i = 0; i < NR_IRQS; i++)
+ irq_shortcuts[i] = NULL;
+
+ for (i = 0; i < 256; i++)
+ etrax_irv->v[i] = weird_irq;
+
+ /* the entries in the break vector contain actual code to be
+ executed by the associated break handler, rather than just a jump
+ address. therefore we need to setup a default breakpoint handler
+ for all breakpoints */
+
+ for (i = 0; i < 16; i++)
+ set_break_vector(i, do_sigtrap);
+
+ /* set all etrax irq's to the bad handlers */
+ for (i = 2; i < NR_IRQS; i++)
+ set_int_vector(i, bad_interrupt[i]);
+
+ /* except IRQ 15 which is the multiple-IRQ handler on Etrax100 */
+
+ set_int_vector(15, multiple_interrupt);
+
+ /* 0 and 1 which are special breakpoint/NMI traps */
+
+ set_int_vector(0, hwbreakpoint);
+ set_int_vector(1, IRQ1_interrupt);
+
+ /* and irq 14 which is the mmu bus fault handler */
+
+ set_int_vector(14, mmu_bus_fault);
+
+ /* setup the system-call trap, which is reached by BREAK 13 */
+
+ set_break_vector(13, system_call);
+
+ /* setup a breakpoint handler for debugging used for both user and
+ kernel mode debugging (which is why it is not inside an ifdef
+ CONFIG_ETRAX_KGDB) */
+ set_break_vector(8, gdb_handle_breakpoint);
+
+#ifdef CONFIG_ETRAX_KGDB
+ /* setup kgdb if its enabled, and break into the debugger */
+ kgdb_init();
+ breakpoint();
+#endif
+}
diff --git a/arch/cris/arch-v10/kernel/kgdb.c b/arch/cris/arch-v10/kernel/kgdb.c
new file mode 100644
index 00000000000..7d368c877ee
--- /dev/null
+++ b/arch/cris/arch-v10/kernel/kgdb.c
@@ -0,0 +1,1568 @@
+/*!**************************************************************************
+*!
+*! FILE NAME : kgdb.c
+*!
+*! DESCRIPTION: Implementation of the gdb stub with respect to ETRAX 100.
+*! It is a mix of arch/m68k/kernel/kgdb.c and cris_stub.c.
+*!
+*!---------------------------------------------------------------------------
+*! HISTORY
+*!
+*! DATE NAME CHANGES
+*! ---- ---- -------
+*! Apr 26 1999 Hendrik Ruijter Initial version.
+*! May 6 1999 Hendrik Ruijter Removed call to strlen in libc and removed
+*! struct assignment as it generates calls to
+*! memcpy in libc.
+*! Jun 17 1999 Hendrik Ruijter Added gdb 4.18 support. 'X', 'qC' and 'qL'.
+*! Jul 21 1999 Bjorn Wesen eLinux port
+*!
+*! $Log: kgdb.c,v $
+*! Revision 1.5 2004/10/07 13:59:08 starvik
+*! Corrected call to set_int_vector
+*!
+*! Revision 1.4 2003/04/09 05:20:44 starvik
+*! Merge of Linux 2.5.67
+*!
+*! Revision 1.3 2003/01/21 19:11:08 starvik
+*! Modified include path for new dir layout
+*!
+*! Revision 1.2 2002/11/19 14:35:24 starvik
+*! Changes from linux 2.4
+*! Changed struct initializer syntax to the currently prefered notation
+*!
+*! Revision 1.1 2001/12/17 13:59:27 bjornw
+*! Initial revision
+*!
+*! Revision 1.6 2001/10/09 13:10:03 matsfg
+*! Added $ on registers and removed some underscores
+*!
+*! Revision 1.5 2001/04/17 13:58:39 orjanf
+*! * Renamed CONFIG_KGDB to CONFIG_ETRAX_KGDB.
+*!
+*! Revision 1.4 2001/02/23 13:45:19 bjornw
+*! config.h check
+*!
+*! Revision 1.3 2001/01/31 18:08:23 orjanf
+*! Removed kgdb_handle_breakpoint from being the break 8 handler.
+*!
+*! Revision 1.2 2001/01/12 14:22:25 orjanf
+*! Updated kernel debugging support to work with ETRAX 100LX.
+*!
+*! Revision 1.1 2000/07/10 16:25:21 bjornw
+*! Initial revision
+*!
+*! Revision 1.1.1.1 1999/12/03 14:57:31 bjornw
+*! * Initial version of arch/cris, the latest CRIS architecture with an MMU.
+*! Mostly copied from arch/etrax100 with appropriate renames of files.
+*! The mm/ subdir is copied from arch/i386.
+*! This does not compile yet at all.
+*!
+*!
+*! Revision 1.4 1999/07/22 17:25:25 bjornw
+*! Dont wait for + in putpacket if we havent hit the initial breakpoint yet. Added a kgdb_init function which sets up the break and irq vectors.
+*!
+*! Revision 1.3 1999/07/21 19:51:18 bjornw
+*! Check if the interrupting char is a ctrl-C, ignore otherwise.
+*!
+*! Revision 1.2 1999/07/21 18:09:39 bjornw
+*! Ported to eLinux architecture, and added some kgdb documentation.
+*!
+*!
+*!---------------------------------------------------------------------------
+*!
+*! $Id: kgdb.c,v 1.5 2004/10/07 13:59:08 starvik Exp $
+*!
+*! (C) Copyright 1999, Axis Communications AB, LUND, SWEDEN
+*!
+*!**************************************************************************/
+/* @(#) cris_stub.c 1.3 06/17/99 */
+
+/*
+ * kgdb usage notes:
+ * -----------------
+ *
+ * If you select CONFIG_ETRAX_KGDB in the configuration, the kernel will be
+ * built with different gcc flags: "-g" is added to get debug infos, and
+ * "-fomit-frame-pointer" is omitted to make debugging easier. Since the
+ * resulting kernel will be quite big (approx. > 7 MB), it will be stripped
+ * before compresion. Such a kernel will behave just as usually, except if
+ * given a "debug=<device>" command line option. (Only serial devices are
+ * allowed for <device>, i.e. no printers or the like; possible values are
+ * machine depedend and are the same as for the usual debug device, the one
+ * for logging kernel messages.) If that option is given and the device can be
+ * initialized, the kernel will connect to the remote gdb in trap_init(). The
+ * serial parameters are fixed to 8N1 and 115200 bps, for easyness of
+ * implementation.
+ *
+ * To start a debugging session, start that gdb with the debugging kernel
+ * image (the one with the symbols, vmlinux.debug) named on the command line.
+ * This file will be used by gdb to get symbol and debugging infos about the
+ * kernel. Next, select remote debug mode by
+ * target remote <device>
+ * where <device> is the name of the serial device over which the debugged
+ * machine is connected. Maybe you have to adjust the baud rate by
+ * set remotebaud <rate>
+ * or also other parameters with stty:
+ * shell stty ... </dev/...
+ * If the kernel to debug has already booted, it waited for gdb and now
+ * connects, and you'll see a breakpoint being reported. If the kernel isn't
+ * running yet, start it now. The order of gdb and the kernel doesn't matter.
+ * Another thing worth knowing about in the getting-started phase is how to
+ * debug the remote protocol itself. This is activated with
+ * set remotedebug 1
+ * gdb will then print out each packet sent or received. You'll also get some
+ * messages about the gdb stub on the console of the debugged machine.
+ *
+ * If all that works, you can use lots of the usual debugging techniques on
+ * the kernel, e.g. inspecting and changing variables/memory, setting
+ * breakpoints, single stepping and so on. It's also possible to interrupt the
+ * debugged kernel by pressing C-c in gdb. Have fun! :-)
+ *
+ * The gdb stub is entered (and thus the remote gdb gets control) in the
+ * following situations:
+ *
+ * - If breakpoint() is called. This is just after kgdb initialization, or if
+ * a breakpoint() call has been put somewhere into the kernel source.
+ * (Breakpoints can of course also be set the usual way in gdb.)
+ * In eLinux, we call breakpoint() in init/main.c after IRQ initialization.
+ *
+ * - If there is a kernel exception, i.e. bad_super_trap() or die_if_kernel()
+ * are entered. All the CPU exceptions are mapped to (more or less..., see
+ * the hard_trap_info array below) appropriate signal, which are reported
+ * to gdb. die_if_kernel() is usually called after some kind of access
+ * error and thus is reported as SIGSEGV.
+ *
+ * - When panic() is called. This is reported as SIGABRT.
+ *
+ * - If C-c is received over the serial line, which is treated as
+ * SIGINT.
+ *
+ * Of course, all these signals are just faked for gdb, since there is no
+ * signal concept as such for the kernel. It also isn't possible --obviously--
+ * to set signal handlers from inside gdb, or restart the kernel with a
+ * signal.
+ *
+ * Current limitations:
+ *
+ * - While the kernel is stopped, interrupts are disabled for safety reasons
+ * (i.e., variables not changing magically or the like). But this also
+ * means that the clock isn't running anymore, and that interrupts from the
+ * hardware may get lost/not be served in time. This can cause some device
+ * errors...
+ *
+ * - When single-stepping, only one instruction of the current thread is
+ * executed, but interrupts are allowed for that time and will be serviced
+ * if pending. Be prepared for that.
+ *
+ * - All debugging happens in kernel virtual address space. There's no way to
+ * access physical memory not mapped in kernel space, or to access user
+ * space. A way to work around this is using get_user_long & Co. in gdb
+ * expressions, but only for the current process.
+ *
+ * - Interrupting the kernel only works if interrupts are currently allowed,
+ * and the interrupt of the serial line isn't blocked by some other means
+ * (IPL too high, disabled, ...)
+ *
+ * - The gdb stub is currently not reentrant, i.e. errors that happen therein
+ * (e.g. accessing invalid memory) may not be caught correctly. This could
+ * be removed in future by introducing a stack of struct registers.
+ *
+ */
+
+/*
+ * To enable debugger support, two things need to happen. One, a
+ * call to kgdb_init() is necessary in order to allow any breakpoints
+ * or error conditions to be properly intercepted and reported to gdb.
+ * Two, a breakpoint needs to be generated to begin communication. This
+ * is most easily accomplished by a call to breakpoint().
+ *
+ * The following gdb commands are supported:
+ *
+ * command function Return value
+ *
+ * g return the value of the CPU registers hex data or ENN
+ * G set the value of the CPU registers OK or ENN
+ *
+ * mAA..AA,LLLL Read LLLL bytes at address AA..AA hex data or ENN
+ * MAA..AA,LLLL: Write LLLL bytes at address AA.AA OK or ENN
+ *
+ * c Resume at current address SNN ( signal NN)
+ * cAA..AA Continue at address AA..AA SNN
+ *
+ * s Step one instruction SNN
+ * sAA..AA Step one instruction from AA..AA SNN
+ *
+ * k kill
+ *
+ * ? What was the last sigval ? SNN (signal NN)
+ *
+ * bBB..BB Set baud rate to BB..BB OK or BNN, then sets
+ * baud rate
+ *
+ * All commands and responses are sent with a packet which includes a
+ * checksum. A packet consists of
+ *
+ * $<packet info>#<checksum>.
+ *
+ * where
+ * <packet info> :: <characters representing the command or response>
+ * <checksum> :: < two hex digits computed as modulo 256 sum of <packetinfo>>
+ *
+ * When a packet is received, it is first acknowledged with either '+' or '-'.
+ * '+' indicates a successful transfer. '-' indicates a failed transfer.
+ *
+ * Example:
+ *
+ * Host: Reply:
+ * $m0,10#2a +$00010203040506070809101112131415#42
+ *
+ */
+
+
+#include <linux/string.h>
+#include <linux/signal.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/linkage.h>
+
+#include <asm/setup.h>
+#include <asm/ptrace.h>
+
+#include <asm/arch/svinto.h>
+#include <asm/irq.h>
+
+static int kgdb_started = 0;
+
+/********************************* Register image ****************************/
+/* Use the order of registers as defined in "AXIS ETRAX CRIS Programmer's
+ Reference", p. 1-1, with the additional register definitions of the
+ ETRAX 100LX in cris-opc.h.
+ There are 16 general 32-bit registers, R0-R15, where R14 is the stack
+ pointer, SP, and R15 is the program counter, PC.
+ There are 16 special registers, P0-P15, where three of the unimplemented
+ registers, P0, P4 and P8, are reserved as zero-registers. A read from
+ any of these registers returns zero and a write has no effect. */
+
+typedef
+struct register_image
+{
+ /* Offset */
+ unsigned int r0; /* 0x00 */
+ unsigned int r1; /* 0x04 */
+ unsigned int r2; /* 0x08 */
+ unsigned int r3; /* 0x0C */
+ unsigned int r4; /* 0x10 */
+ unsigned int r5; /* 0x14 */
+ unsigned int r6; /* 0x18 */
+ unsigned int r7; /* 0x1C */
+ unsigned int r8; /* 0x20 Frame pointer */
+ unsigned int r9; /* 0x24 */
+ unsigned int r10; /* 0x28 */
+ unsigned int r11; /* 0x2C */
+ unsigned int r12; /* 0x30 */
+ unsigned int r13; /* 0x34 */
+ unsigned int sp; /* 0x38 Stack pointer */
+ unsigned int pc; /* 0x3C Program counter */
+
+ unsigned char p0; /* 0x40 8-bit zero-register */
+ unsigned char vr; /* 0x41 Version register */
+
+ unsigned short p4; /* 0x42 16-bit zero-register */
+ unsigned short ccr; /* 0x44 Condition code register */
+
+ unsigned int mof; /* 0x46 Multiply overflow register */
+
+ unsigned int p8; /* 0x4A 32-bit zero-register */
+ unsigned int ibr; /* 0x4E Interrupt base register */
+ unsigned int irp; /* 0x52 Interrupt return pointer */
+ unsigned int srp; /* 0x56 Subroutine return pointer */
+ unsigned int bar; /* 0x5A Breakpoint address register */
+ unsigned int dccr; /* 0x5E Double condition code register */
+ unsigned int brp; /* 0x62 Breakpoint return pointer (pc in caller) */
+ unsigned int usp; /* 0x66 User mode stack pointer */
+} registers;
+
+/************** Prototypes for local library functions ***********************/
+
+/* Copy of strcpy from libc. */
+static char *gdb_cris_strcpy (char *s1, const char *s2);
+
+/* Copy of strlen from libc. */
+static int gdb_cris_strlen (const char *s);
+
+/* Copy of memchr from libc. */
+static void *gdb_cris_memchr (const void *s, int c, int n);
+
+/* Copy of strtol from libc. Does only support base 16. */
+static int gdb_cris_strtol (const char *s, char **endptr, int base);
+
+/********************** Prototypes for local functions. **********************/
+/* Copy the content of a register image into another. The size n is
+ the size of the register image. Due to struct assignment generation of
+ memcpy in libc. */
+static void copy_registers (registers *dptr, registers *sptr, int n);
+
+/* Copy the stored registers from the stack. Put the register contents
+ of thread thread_id in the struct reg. */
+static void copy_registers_from_stack (int thread_id, registers *reg);
+
+/* Copy the registers to the stack. Put the register contents of thread
+ thread_id from struct reg to the stack. */
+static void copy_registers_to_stack (int thread_id, registers *reg);
+
+/* Write a value to a specified register regno in the register image
+ of the current thread. */
+static int write_register (int regno, char *val);
+
+/* Write a value to a specified register in the stack of a thread other
+ than the current thread. */
+static write_stack_register (int thread_id, int regno, char *valptr);
+
+/* Read a value from a specified register in the register image. Returns the
+ status of the read operation. The register value is returned in valptr. */
+static int read_register (char regno, unsigned int *valptr);
+
+/* Serial port, reads one character. ETRAX 100 specific. from debugport.c */
+int getDebugChar (void);
+
+/* Serial port, writes one character. ETRAX 100 specific. from debugport.c */
+void putDebugChar (int val);
+
+void enableDebugIRQ (void);
+
+/* Returns the character equivalent of a nibble, bit 7, 6, 5, and 4 of a byte,
+ represented by int x. */
+static char highhex (int x);
+
+/* Returns the character equivalent of a nibble, bit 3, 2, 1, and 0 of a byte,
+ represented by int x. */
+static char lowhex (int x);
+
+/* Returns the integer equivalent of a hexadecimal character. */
+static int hex (char ch);
+
+/* Convert the memory, pointed to by mem into hexadecimal representation.
+ Put the result in buf, and return a pointer to the last character
+ in buf (null). */
+static char *mem2hex (char *buf, unsigned char *mem, int count);
+
+/* Convert the array, in hexadecimal representation, pointed to by buf into
+ binary representation. Put the result in mem, and return a pointer to
+ the character after the last byte written. */
+static unsigned char *hex2mem (unsigned char *mem, char *buf, int count);
+
+/* Put the content of the array, in binary representation, pointed to by buf
+ into memory pointed to by mem, and return a pointer to
+ the character after the last byte written. */
+static unsigned char *bin2mem (unsigned char *mem, unsigned char *buf, int count);
+
+/* Await the sequence $<data>#<checksum> and store <data> in the array buffer
+ returned. */
+static void getpacket (char *buffer);
+
+/* Send $<data>#<checksum> from the <data> in the array buffer. */
+static void putpacket (char *buffer);
+
+/* Build and send a response packet in order to inform the host the
+ stub is stopped. */
+static void stub_is_stopped (int sigval);
+
+/* All expected commands are sent from remote.c. Send a response according
+ to the description in remote.c. */
+static void handle_exception (int sigval);
+
+/* Performs a complete re-start from scratch. ETRAX specific. */
+static void kill_restart (void);
+
+/******************** Prototypes for global functions. ***********************/
+
+/* The string str is prepended with the GDB printout token and sent. */
+void putDebugString (const unsigned char *str, int length); /* used by etrax100ser.c */
+
+/* The hook for both static (compiled) and dynamic breakpoints set by GDB.
+ ETRAX 100 specific. */
+void handle_breakpoint (void); /* used by irq.c */
+
+/* The hook for an interrupt generated by GDB. ETRAX 100 specific. */
+void handle_interrupt (void); /* used by irq.c */
+
+/* A static breakpoint to be used at startup. */
+void breakpoint (void); /* called by init/main.c */
+
+/* From osys_int.c, executing_task contains the number of the current
+ executing task in osys. Does not know of object-oriented threads. */
+extern unsigned char executing_task;
+
+/* The number of characters used for a 64 bit thread identifier. */
+#define HEXCHARS_IN_THREAD_ID 16
+
+/* Avoid warning as the internal_stack is not used in the C-code. */
+#define USEDVAR(name) { if (name) { ; } }
+#define USEDFUN(name) { void (*pf)(void) = (void *)name; USEDVAR(pf) }
+
+/********************************** Packet I/O ******************************/
+/* BUFMAX defines the maximum number of characters in
+ inbound/outbound buffers */
+#define BUFMAX 512
+
+/* Run-length encoding maximum length. Send 64 at most. */
+#define RUNLENMAX 64
+
+/* Definition of all valid hexadecimal characters */
+static const char hexchars[] = "0123456789abcdef";
+
+/* The inbound/outbound buffers used in packet I/O */
+static char remcomInBuffer[BUFMAX];
+static char remcomOutBuffer[BUFMAX];
+
+/* Error and warning messages. */
+enum error_type
+{
+ SUCCESS, E01, E02, E03, E04, E05, E06, E07
+};
+static char *error_message[] =
+{
+ "",
+ "E01 Set current or general thread - H[c,g] - internal error.",
+ "E02 Change register content - P - cannot change read-only register.",
+ "E03 Thread is not alive.", /* T, not used. */
+ "E04 The command is not supported - [s,C,S,!,R,d,r] - internal error.",
+ "E05 Change register content - P - the register is not implemented..",
+ "E06 Change memory content - M - internal error.",
+ "E07 Change register content - P - the register is not stored on the stack"
+};
+/********************************* Register image ****************************/
+/* Use the order of registers as defined in "AXIS ETRAX CRIS Programmer's
+ Reference", p. 1-1, with the additional register definitions of the
+ ETRAX 100LX in cris-opc.h.
+ There are 16 general 32-bit registers, R0-R15, where R14 is the stack
+ pointer, SP, and R15 is the program counter, PC.
+ There are 16 special registers, P0-P15, where three of the unimplemented
+ registers, P0, P4 and P8, are reserved as zero-registers. A read from
+ any of these registers returns zero and a write has no effect. */
+enum register_name
+{
+ R0, R1, R2, R3,
+ R4, R5, R6, R7,
+ R8, R9, R10, R11,
+ R12, R13, SP, PC,
+ P0, VR, P2, P3,
+ P4, CCR, P6, MOF,
+ P8, IBR, IRP, SRP,
+ BAR, DCCR, BRP, USP
+};
+
+/* The register sizes of the registers in register_name. An unimplemented register
+ is designated by size 0 in this array. */
+static int register_size[] =
+{
+ 4, 4, 4, 4,
+ 4, 4, 4, 4,
+ 4, 4, 4, 4,
+ 4, 4, 4, 4,
+ 1, 1, 0, 0,
+ 2, 2, 0, 4,
+ 4, 4, 4, 4,
+ 4, 4, 4, 4
+};
+
+/* Contains the register image of the executing thread in the assembler
+ part of the code in order to avoid horrible addressing modes. */
+static registers reg;
+
+/* FIXME: Should this be used? Delete otherwise. */
+/* Contains the assumed consistency state of the register image. Uses the
+ enum error_type for state information. */
+static int consistency_status = SUCCESS;
+
+/********************************** Handle exceptions ************************/
+/* The variable reg contains the register image associated with the
+ current_thread_c variable. It is a complete register image created at
+ entry. The reg_g contains a register image of a task where the general
+ registers are taken from the stack and all special registers are taken
+ from the executing task. It is associated with current_thread_g and used
+ in order to provide access mainly for 'g', 'G' and 'P'.
+*/
+
+/* Need two task id pointers in order to handle Hct and Hgt commands. */
+static int current_thread_c = 0;
+static int current_thread_g = 0;
+
+/* Need two register images in order to handle Hct and Hgt commands. The
+ variable reg_g is in addition to reg above. */
+static registers reg_g;
+
+/********************************** Breakpoint *******************************/
+/* Use an internal stack in the breakpoint and interrupt response routines */
+#define INTERNAL_STACK_SIZE 1024
+static char internal_stack[INTERNAL_STACK_SIZE];
+
+/* Due to the breakpoint return pointer, a state variable is needed to keep
+ track of whether it is a static (compiled) or dynamic (gdb-invoked)
+ breakpoint to be handled. A static breakpoint uses the content of register
+ BRP as it is whereas a dynamic breakpoint requires subtraction with 2
+ in order to execute the instruction. The first breakpoint is static. */
+static unsigned char is_dyn_brkp = 0;
+
+/********************************* String library ****************************/
+/* Single-step over library functions creates trap loops. */
+
+/* Copy char s2[] to s1[]. */
+static char*
+gdb_cris_strcpy (char *s1, const char *s2)
+{
+ char *s = s1;
+
+ for (s = s1; (*s++ = *s2++) != '\0'; )
+ ;
+ return (s1);
+}
+
+/* Find length of s[]. */
+static int
+gdb_cris_strlen (const char *s)
+{
+ const char *sc;
+
+ for (sc = s; *sc != '\0'; sc++)
+ ;
+ return (sc - s);
+}
+
+/* Find first occurrence of c in s[n]. */
+static void*
+gdb_cris_memchr (const void *s, int c, int n)
+{
+ const unsigned char uc = c;
+ const unsigned char *su;
+
+ for (su = s; 0 < n; ++su, --n)
+ if (*su == uc)
+ return ((void *)su);
+ return (NULL);
+}
+/******************************* Standard library ****************************/
+/* Single-step over library functions creates trap loops. */
+/* Convert string to long. */
+static int
+gdb_cris_strtol (const char *s, char **endptr, int base)
+{
+ char *s1;
+ char *sd;
+ int x = 0;
+
+ for (s1 = (char*)s; (sd = gdb_cris_memchr(hexchars, *s1, base)) != NULL; ++s1)
+ x = x * base + (sd - hexchars);
+
+ if (endptr)
+ {
+ /* Unconverted suffix is stored in endptr unless endptr is NULL. */
+ *endptr = s1;
+ }
+
+ return x;
+}
+
+int
+double_this(int x)
+{
+ return 2 * x;
+}
+
+/********************************* Register image ****************************/
+/* Copy the content of a register image into another. The size n is
+ the size of the register image. Due to struct assignment generation of
+ memcpy in libc. */
+static void
+copy_registers (registers *dptr, registers *sptr, int n)
+{
+ unsigned char *dreg;
+ unsigned char *sreg;
+
+ for (dreg = (unsigned char*)dptr, sreg = (unsigned char*)sptr; n > 0; n--)
+ *dreg++ = *sreg++;
+}
+
+#ifdef PROCESS_SUPPORT
+/* Copy the stored registers from the stack. Put the register contents
+ of thread thread_id in the struct reg. */
+static void
+copy_registers_from_stack (int thread_id, registers *regptr)
+{
+ int j;
+ stack_registers *s = (stack_registers *)stack_list[thread_id];
+ unsigned int *d = (unsigned int *)regptr;
+
+ for (j = 13; j >= 0; j--)
+ *d++ = s->r[j];
+ regptr->sp = (unsigned int)stack_list[thread_id];
+ regptr->pc = s->pc;
+ regptr->dccr = s->dccr;
+ regptr->srp = s->srp;
+}
+
+/* Copy the registers to the stack. Put the register contents of thread
+ thread_id from struct reg to the stack. */
+static void
+copy_registers_to_stack (int thread_id, registers *regptr)
+{
+ int i;
+ stack_registers *d = (stack_registers *)stack_list[thread_id];
+ unsigned int *s = (unsigned int *)regptr;
+
+ for (i = 0; i < 14; i++) {
+ d->r[i] = *s++;
+ }
+ d->pc = regptr->pc;
+ d->dccr = regptr->dccr;
+ d->srp = regptr->srp;
+}
+#endif
+
+/* Write a value to a specified register in the register image of the current
+ thread. Returns status code SUCCESS, E02 or E05. */
+static int
+write_register (int regno, char *val)
+{
+ int status = SUCCESS;
+ registers *current_reg = &reg;
+
+ if (regno >= R0 && regno <= PC) {
+ /* 32-bit register with simple offset. */
+ hex2mem ((unsigned char *)current_reg + regno * sizeof(unsigned int),
+ val, sizeof(unsigned int));
+ }
+ else if (regno == P0 || regno == VR || regno == P4 || regno == P8) {
+ /* Do not support read-only registers. */
+ status = E02;
+ }
+ else if (regno == CCR) {
+ /* 16 bit register with complex offset. (P4 is read-only, P6 is not implemented,
+ and P7 (MOF) is 32 bits in ETRAX 100LX. */
+ hex2mem ((unsigned char *)&(current_reg->ccr) + (regno-CCR) * sizeof(unsigned short),
+ val, sizeof(unsigned short));
+ }
+ else if (regno >= MOF && regno <= USP) {
+ /* 32 bit register with complex offset. (P8 has been taken care of.) */
+ hex2mem ((unsigned char *)&(current_reg->ibr) + (regno-IBR) * sizeof(unsigned int),
+ val, sizeof(unsigned int));
+ }
+ else {
+ /* Do not support nonexisting or unimplemented registers (P2, P3, and P6). */
+ status = E05;
+ }
+ return status;
+}
+
+#ifdef PROCESS_SUPPORT
+/* Write a value to a specified register in the stack of a thread other
+ than the current thread. Returns status code SUCCESS or E07. */
+static int
+write_stack_register (int thread_id, int regno, char *valptr)
+{
+ int status = SUCCESS;
+ stack_registers *d = (stack_registers *)stack_list[thread_id];
+ unsigned int val;
+
+ hex2mem ((unsigned char *)&val, valptr, sizeof(unsigned int));
+ if (regno >= R0 && regno < SP) {
+ d->r[regno] = val;
+ }
+ else if (regno == SP) {
+ stack_list[thread_id] = val;
+ }
+ else if (regno == PC) {
+ d->pc = val;
+ }
+ else if (regno == SRP) {
+ d->srp = val;
+ }
+ else if (regno == DCCR) {
+ d->dccr = val;
+ }
+ else {
+ /* Do not support registers in the current thread. */
+ status = E07;
+ }
+ return status;
+}
+#endif
+
+/* Read a value from a specified register in the register image. Returns the
+ value in the register or -1 for non-implemented registers.
+ Should check consistency_status after a call which may be E05 after changes
+ in the implementation. */
+static int
+read_register (char regno, unsigned int *valptr)
+{
+ registers *current_reg = &reg;
+
+ if (regno >= R0 && regno <= PC) {
+ /* 32-bit register with simple offset. */
+ *valptr = *(unsigned int *)((char *)current_reg + regno * sizeof(unsigned int));
+ return SUCCESS;
+ }
+ else if (regno == P0 || regno == VR) {
+ /* 8 bit register with complex offset. */
+ *valptr = (unsigned int)(*(unsigned char *)
+ ((char *)&(current_reg->p0) + (regno-P0) * sizeof(char)));
+ return SUCCESS;
+ }
+ else if (regno == P4 || regno == CCR) {
+ /* 16 bit register with complex offset. */
+ *valptr = (unsigned int)(*(unsigned short *)
+ ((char *)&(current_reg->p4) + (regno-P4) * sizeof(unsigned short)));
+ return SUCCESS;
+ }
+ else if (regno >= MOF && regno <= USP) {
+ /* 32 bit register with complex offset. */
+ *valptr = *(unsigned int *)((char *)&(current_reg->p8)
+ + (regno-P8) * sizeof(unsigned int));
+ return SUCCESS;
+ }
+ else {
+ /* Do not support nonexisting or unimplemented registers (P2, P3, and P6). */
+ consistency_status = E05;
+ return E05;
+ }
+}
+
+/********************************** Packet I/O ******************************/
+/* Returns the character equivalent of a nibble, bit 7, 6, 5, and 4 of a byte,
+ represented by int x. */
+static inline char
+highhex(int x)
+{
+ return hexchars[(x >> 4) & 0xf];
+}
+
+/* Returns the character equivalent of a nibble, bit 3, 2, 1, and 0 of a byte,
+ represented by int x. */
+static inline char
+lowhex(int x)
+{
+ return hexchars[x & 0xf];
+}
+
+/* Returns the integer equivalent of a hexadecimal character. */
+static int
+hex (char ch)
+{
+ if ((ch >= 'a') && (ch <= 'f'))
+ return (ch - 'a' + 10);
+ if ((ch >= '0') && (ch <= '9'))
+ return (ch - '0');
+ if ((ch >= 'A') && (ch <= 'F'))
+ return (ch - 'A' + 10);
+ return (-1);
+}
+
+/* Convert the memory, pointed to by mem into hexadecimal representation.
+ Put the result in buf, and return a pointer to the last character
+ in buf (null). */
+
+static int do_printk = 0;
+
+static char *
+mem2hex(char *buf, unsigned char *mem, int count)
+{
+ int i;
+ int ch;
+
+ if (mem == NULL) {
+ /* Bogus read from m0. FIXME: What constitutes a valid address? */
+ for (i = 0; i < count; i++) {
+ *buf++ = '0';
+ *buf++ = '0';
+ }
+ } else {
+ /* Valid mem address. */
+ for (i = 0; i < count; i++) {
+ ch = *mem++;
+ *buf++ = highhex (ch);
+ *buf++ = lowhex (ch);
+ }
+ }
+
+ /* Terminate properly. */
+ *buf = '\0';
+ return (buf);
+}
+
+/* Convert the array, in hexadecimal representation, pointed to by buf into
+ binary representation. Put the result in mem, and return a pointer to
+ the character after the last byte written. */
+static unsigned char*
+hex2mem (unsigned char *mem, char *buf, int count)
+{
+ int i;
+ unsigned char ch;
+ for (i = 0; i < count; i++) {
+ ch = hex (*buf++) << 4;
+ ch = ch + hex (*buf++);
+ *mem++ = ch;
+ }
+ return (mem);
+}
+
+/* Put the content of the array, in binary representation, pointed to by buf
+ into memory pointed to by mem, and return a pointer to the character after
+ the last byte written.
+ Gdb will escape $, #, and the escape char (0x7d). */
+static unsigned char*
+bin2mem (unsigned char *mem, unsigned char *buf, int count)
+{
+ int i;
+ unsigned char *next;
+ for (i = 0; i < count; i++) {
+ /* Check for any escaped characters. Be paranoid and
+ only unescape chars that should be escaped. */
+ if (*buf == 0x7d) {
+ next = buf + 1;
+ if (*next == 0x3 || *next == 0x4 || *next == 0x5D) /* #, $, ESC */
+ {
+ buf++;
+ *buf += 0x20;
+ }
+ }
+ *mem++ = *buf++;
+ }
+ return (mem);
+}
+
+/* Await the sequence $<data>#<checksum> and store <data> in the array buffer
+ returned. */
+static void
+getpacket (char *buffer)
+{
+ unsigned char checksum;
+ unsigned char xmitcsum;
+ int i;
+ int count;
+ char ch;
+ do {
+ while ((ch = getDebugChar ()) != '$')
+ /* Wait for the start character $ and ignore all other characters */;
+ checksum = 0;
+ xmitcsum = -1;
+ count = 0;
+ /* Read until a # or the end of the buffer is reached */
+ while (count < BUFMAX) {
+ ch = getDebugChar ();
+ if (ch == '#')
+ break;
+ checksum = checksum + ch;
+ buffer[count] = ch;
+ count = count + 1;
+ }
+ buffer[count] = '\0';
+
+ if (ch == '#') {
+ xmitcsum = hex (getDebugChar ()) << 4;
+ xmitcsum += hex (getDebugChar ());
+ if (checksum != xmitcsum) {
+ /* Wrong checksum */
+ putDebugChar ('-');
+ }
+ else {
+ /* Correct checksum */
+ putDebugChar ('+');
+ /* If sequence characters are received, reply with them */
+ if (buffer[2] == ':') {
+ putDebugChar (buffer[0]);
+ putDebugChar (buffer[1]);
+ /* Remove the sequence characters from the buffer */
+ count = gdb_cris_strlen (buffer);
+ for (i = 3; i <= count; i++)
+ buffer[i - 3] = buffer[i];
+ }
+ }
+ }
+ } while (checksum != xmitcsum);
+}
+
+/* Send $<data>#<checksum> from the <data> in the array buffer. */
+
+static void
+putpacket(char *buffer)
+{
+ int checksum;
+ int runlen;
+ int encode;
+
+ do {
+ char *src = buffer;
+ putDebugChar ('$');
+ checksum = 0;
+ while (*src) {
+ /* Do run length encoding */
+ putDebugChar (*src);
+ checksum += *src;
+ runlen = 0;
+ while (runlen < RUNLENMAX && *src == src[runlen]) {
+ runlen++;
+ }
+ if (runlen > 3) {
+ /* Got a useful amount */
+ putDebugChar ('*');
+ checksum += '*';
+ encode = runlen + ' ' - 4;
+ putDebugChar (encode);
+ checksum += encode;
+ src += runlen;
+ }
+ else {
+ src++;
+ }
+ }
+ putDebugChar ('#');
+ putDebugChar (highhex (checksum));
+ putDebugChar (lowhex (checksum));
+ } while(kgdb_started && (getDebugChar() != '+'));
+}
+
+/* The string str is prepended with the GDB printout token and sent. Required
+ in traditional implementations. */
+void
+putDebugString (const unsigned char *str, int length)
+{
+ remcomOutBuffer[0] = 'O';
+ mem2hex(&remcomOutBuffer[1], (unsigned char *)str, length);
+ putpacket(remcomOutBuffer);
+}
+
+/********************************** Handle exceptions ************************/
+/* Build and send a response packet in order to inform the host the
+ stub is stopped. TAAn...:r...;n...:r...;n...:r...;
+ AA = signal number
+ n... = register number (hex)
+ r... = register contents
+ n... = `thread'
+ r... = thread process ID. This is a hex integer.
+ n... = other string not starting with valid hex digit.
+ gdb should ignore this n,r pair and go on to the next.
+ This way we can extend the protocol. */
+static void
+stub_is_stopped(int sigval)
+{
+ char *ptr = remcomOutBuffer;
+ int regno;
+
+ unsigned int reg_cont;
+ int status;
+
+ /* Send trap type (converted to signal) */
+
+ *ptr++ = 'T';
+ *ptr++ = highhex (sigval);
+ *ptr++ = lowhex (sigval);
+
+ /* Send register contents. We probably only need to send the
+ * PC, frame pointer and stack pointer here. Other registers will be
+ * explicitely asked for. But for now, send all.
+ */
+
+ for (regno = R0; regno <= USP; regno++) {
+ /* Store n...:r...; for the registers in the buffer. */
+
+ status = read_register (regno, &reg_cont);
+
+ if (status == SUCCESS) {
+
+ *ptr++ = highhex (regno);
+ *ptr++ = lowhex (regno);
+ *ptr++ = ':';
+
+ ptr = mem2hex(ptr, (unsigned char *)&reg_cont,
+ register_size[regno]);
+ *ptr++ = ';';
+ }
+
+ }
+
+#ifdef PROCESS_SUPPORT
+ /* Store the registers of the executing thread. Assume that both step,
+ continue, and register content requests are with respect to this
+ thread. The executing task is from the operating system scheduler. */
+
+ current_thread_c = executing_task;
+ current_thread_g = executing_task;
+
+ /* A struct assignment translates into a libc memcpy call. Avoid
+ all libc functions in order to prevent recursive break points. */
+ copy_registers (&reg_g, &reg, sizeof(registers));
+
+ /* Store thread:r...; with the executing task TID. */
+ gdb_cris_strcpy (&remcomOutBuffer[pos], "thread:");
+ pos += gdb_cris_strlen ("thread:");
+ remcomOutBuffer[pos++] = highhex (executing_task);
+ remcomOutBuffer[pos++] = lowhex (executing_task);
+ gdb_cris_strcpy (&remcomOutBuffer[pos], ";");
+#endif
+
+ /* null-terminate and send it off */
+
+ *ptr = 0;
+
+ putpacket (remcomOutBuffer);
+}
+
+/* All expected commands are sent from remote.c. Send a response according
+ to the description in remote.c. */
+static void
+handle_exception (int sigval)
+{
+ /* Avoid warning of not used. */
+
+ USEDFUN(handle_exception);
+ USEDVAR(internal_stack[0]);
+
+ /* Send response. */
+
+ stub_is_stopped (sigval);
+
+ for (;;) {
+ remcomOutBuffer[0] = '\0';
+ getpacket (remcomInBuffer);
+ switch (remcomInBuffer[0]) {
+ case 'g':
+ /* Read registers: g
+ Success: Each byte of register data is described by two hex digits.
+ Registers are in the internal order for GDB, and the bytes
+ in a register are in the same order the machine uses.
+ Failure: void. */
+
+ {
+#ifdef PROCESS_SUPPORT
+ /* Use the special register content in the executing thread. */
+ copy_registers (&reg_g, &reg, sizeof(registers));
+ /* Replace the content available on the stack. */
+ if (current_thread_g != executing_task) {
+ copy_registers_from_stack (current_thread_g, &reg_g);
+ }
+ mem2hex ((unsigned char *)remcomOutBuffer, (unsigned char *)&reg_g, sizeof(registers));
+#else
+ mem2hex(remcomOutBuffer, (char *)&reg, sizeof(registers));
+#endif
+ }
+ break;
+
+ case 'G':
+ /* Write registers. GXX..XX
+ Each byte of register data is described by two hex digits.
+ Success: OK
+ Failure: void. */
+#ifdef PROCESS_SUPPORT
+ hex2mem ((unsigned char *)&reg_g, &remcomInBuffer[1], sizeof(registers));
+ if (current_thread_g == executing_task) {
+ copy_registers (&reg, &reg_g, sizeof(registers));
+ }
+ else {
+ copy_registers_to_stack(current_thread_g, &reg_g);
+ }
+#else
+ hex2mem((char *)&reg, &remcomInBuffer[1], sizeof(registers));
+#endif
+ gdb_cris_strcpy (remcomOutBuffer, "OK");
+ break;
+
+ case 'P':
+ /* Write register. Pn...=r...
+ Write register n..., hex value without 0x, with value r...,
+ which contains a hex value without 0x and two hex digits
+ for each byte in the register (target byte order). P1f=11223344 means
+ set register 31 to 44332211.
+ Success: OK
+ Failure: E02, E05 */
+ {
+ char *suffix;
+ int regno = gdb_cris_strtol (&remcomInBuffer[1], &suffix, 16);
+ int status;
+#ifdef PROCESS_SUPPORT
+ if (current_thread_g != executing_task)
+ status = write_stack_register (current_thread_g, regno, suffix+1);
+ else
+#endif
+ status = write_register (regno, suffix+1);
+
+ switch (status) {
+ case E02:
+ /* Do not support read-only registers. */
+ gdb_cris_strcpy (remcomOutBuffer, error_message[E02]);
+ break;
+ case E05:
+ /* Do not support non-existing registers. */
+ gdb_cris_strcpy (remcomOutBuffer, error_message[E05]);
+ break;
+ case E07:
+ /* Do not support non-existing registers on the stack. */
+ gdb_cris_strcpy (remcomOutBuffer, error_message[E07]);
+ break;
+ default:
+ /* Valid register number. */
+ gdb_cris_strcpy (remcomOutBuffer, "OK");
+ break;
+ }
+ }
+ break;
+
+ case 'm':
+ /* Read from memory. mAA..AA,LLLL
+ AA..AA is the address and LLLL is the length.
+ Success: XX..XX is the memory content. Can be fewer bytes than
+ requested if only part of the data may be read. m6000120a,6c means
+ retrieve 108 byte from base address 6000120a.
+ Failure: void. */
+ {
+ char *suffix;
+ unsigned char *addr = (unsigned char *)gdb_cris_strtol(&remcomInBuffer[1],
+ &suffix, 16); int length = gdb_cris_strtol(suffix+1, 0, 16);
+
+ mem2hex(remcomOutBuffer, addr, length);
+ }
+ break;
+
+ case 'X':
+ /* Write to memory. XAA..AA,LLLL:XX..XX
+ AA..AA is the start address, LLLL is the number of bytes, and
+ XX..XX is the binary data.
+ Success: OK
+ Failure: void. */
+ case 'M':
+ /* Write to memory. MAA..AA,LLLL:XX..XX
+ AA..AA is the start address, LLLL is the number of bytes, and
+ XX..XX is the hexadecimal data.
+ Success: OK
+ Failure: void. */
+ {
+ char *lenptr;
+ char *dataptr;
+ unsigned char *addr = (unsigned char *)gdb_cris_strtol(&remcomInBuffer[1],
+ &lenptr, 16);
+ int length = gdb_cris_strtol(lenptr+1, &dataptr, 16);
+ if (*lenptr == ',' && *dataptr == ':') {
+ if (remcomInBuffer[0] == 'M') {
+ hex2mem(addr, dataptr + 1, length);
+ }
+ else /* X */ {
+ bin2mem(addr, dataptr + 1, length);
+ }
+ gdb_cris_strcpy (remcomOutBuffer, "OK");
+ }
+ else {
+ gdb_cris_strcpy (remcomOutBuffer, error_message[E06]);
+ }
+ }
+ break;
+
+ case 'c':
+ /* Continue execution. cAA..AA
+ AA..AA is the address where execution is resumed. If AA..AA is
+ omitted, resume at the present address.
+ Success: return to the executing thread.
+ Failure: will never know. */
+ if (remcomInBuffer[1] != '\0') {
+ reg.pc = gdb_cris_strtol (&remcomInBuffer[1], 0, 16);
+ }
+ enableDebugIRQ();
+ return;
+
+ case 's':
+ /* Step. sAA..AA
+ AA..AA is the address where execution is resumed. If AA..AA is
+ omitted, resume at the present address. Success: return to the
+ executing thread. Failure: will never know.
+
+ Should never be invoked. The single-step is implemented on
+ the host side. If ever invoked, it is an internal error E04. */
+ gdb_cris_strcpy (remcomOutBuffer, error_message[E04]);
+ putpacket (remcomOutBuffer);
+ return;
+
+ case '?':
+ /* The last signal which caused a stop. ?
+ Success: SAA, where AA is the signal number.
+ Failure: void. */
+ remcomOutBuffer[0] = 'S';
+ remcomOutBuffer[1] = highhex (sigval);
+ remcomOutBuffer[2] = lowhex (sigval);
+ remcomOutBuffer[3] = 0;
+ break;
+
+ case 'D':
+ /* Detach from host. D
+ Success: OK, and return to the executing thread.
+ Failure: will never know */
+ putpacket ("OK");
+ return;
+
+ case 'k':
+ case 'r':
+ /* kill request or reset request.
+ Success: restart of target.
+ Failure: will never know. */
+ kill_restart ();
+ break;
+
+ case 'C':
+ case 'S':
+ case '!':
+ case 'R':
+ case 'd':
+ /* Continue with signal sig. Csig;AA..AA
+ Step with signal sig. Ssig;AA..AA
+ Use the extended remote protocol. !
+ Restart the target system. R0
+ Toggle debug flag. d
+ Search backwards. tAA:PP,MM
+ Not supported: E04 */
+ gdb_cris_strcpy (remcomOutBuffer, error_message[E04]);
+ break;
+#ifdef PROCESS_SUPPORT
+
+ case 'T':
+ /* Thread alive. TXX
+ Is thread XX alive?
+ Success: OK, thread XX is alive.
+ Failure: E03, thread XX is dead. */
+ {
+ int thread_id = (int)gdb_cris_strtol (&remcomInBuffer[1], 0, 16);
+ /* Cannot tell whether it is alive or not. */
+ if (thread_id >= 0 && thread_id < number_of_tasks)
+ gdb_cris_strcpy (remcomOutBuffer, "OK");
+ }
+ break;
+
+ case 'H':
+ /* Set thread for subsequent operations: Hct
+ c = 'c' for thread used in step and continue;
+ t can be -1 for all threads.
+ c = 'g' for thread used in other operations.
+ t = 0 means pick any thread.
+ Success: OK
+ Failure: E01 */
+ {
+ int thread_id = gdb_cris_strtol (&remcomInBuffer[2], 0, 16);
+ if (remcomInBuffer[1] == 'c') {
+ /* c = 'c' for thread used in step and continue */
+ /* Do not change current_thread_c here. It would create a mess in
+ the scheduler. */
+ gdb_cris_strcpy (remcomOutBuffer, "OK");
+ }
+ else if (remcomInBuffer[1] == 'g') {
+ /* c = 'g' for thread used in other operations.
+ t = 0 means pick any thread. Impossible since the scheduler does
+ not allow that. */
+ if (thread_id >= 0 && thread_id < number_of_tasks) {
+ current_thread_g = thread_id;
+ gdb_cris_strcpy (remcomOutBuffer, "OK");
+ }
+ else {
+ /* Not expected - send an error message. */
+ gdb_cris_strcpy (remcomOutBuffer, error_message[E01]);
+ }
+ }
+ else {
+ /* Not expected - send an error message. */
+ gdb_cris_strcpy (remcomOutBuffer, error_message[E01]);
+ }
+ }
+ break;
+
+ case 'q':
+ case 'Q':
+ /* Query of general interest. qXXXX
+ Set general value XXXX. QXXXX=yyyy */
+ {
+ int pos;
+ int nextpos;
+ int thread_id;
+
+ switch (remcomInBuffer[1]) {
+ case 'C':
+ /* Identify the remote current thread. */
+ gdb_cris_strcpy (&remcomOutBuffer[0], "QC");
+ remcomOutBuffer[2] = highhex (current_thread_c);
+ remcomOutBuffer[3] = lowhex (current_thread_c);
+ remcomOutBuffer[4] = '\0';
+ break;
+ case 'L':
+ gdb_cris_strcpy (&remcomOutBuffer[0], "QM");
+ /* Reply with number of threads. */
+ if (os_is_started()) {
+ remcomOutBuffer[2] = highhex (number_of_tasks);
+ remcomOutBuffer[3] = lowhex (number_of_tasks);
+ }
+ else {
+ remcomOutBuffer[2] = highhex (0);
+ remcomOutBuffer[3] = lowhex (1);
+ }
+ /* Done with the reply. */
+ remcomOutBuffer[4] = lowhex (1);
+ pos = 5;
+ /* Expects the argument thread id. */
+ for (; pos < (5 + HEXCHARS_IN_THREAD_ID); pos++)
+ remcomOutBuffer[pos] = remcomInBuffer[pos];
+ /* Reply with the thread identifiers. */
+ if (os_is_started()) {
+ /* Store the thread identifiers of all tasks. */
+ for (thread_id = 0; thread_id < number_of_tasks; thread_id++) {
+ nextpos = pos + HEXCHARS_IN_THREAD_ID - 1;
+ for (; pos < nextpos; pos ++)
+ remcomOutBuffer[pos] = lowhex (0);
+ remcomOutBuffer[pos++] = lowhex (thread_id);
+ }
+ }
+ else {
+ /* Store the thread identifier of the boot task. */
+ nextpos = pos + HEXCHARS_IN_THREAD_ID - 1;
+ for (; pos < nextpos; pos ++)
+ remcomOutBuffer[pos] = lowhex (0);
+ remcomOutBuffer[pos++] = lowhex (current_thread_c);
+ }
+ remcomOutBuffer[pos] = '\0';
+ break;
+ default:
+ /* Not supported: "" */
+ /* Request information about section offsets: qOffsets. */
+ remcomOutBuffer[0] = 0;
+ break;
+ }
+ }
+ break;
+#endif /* PROCESS_SUPPORT */
+
+ default:
+ /* The stub should ignore other request and send an empty
+ response ($#<checksum>). This way we can extend the protocol and GDB
+ can tell whether the stub it is talking to uses the old or the new. */
+ remcomOutBuffer[0] = 0;
+ break;
+ }
+ putpacket(remcomOutBuffer);
+ }
+}
+
+/* The jump is to the address 0x00000002. Performs a complete re-start
+ from scratch. */
+static void
+kill_restart ()
+{
+ __asm__ volatile ("jump 2");
+}
+
+/********************************** Breakpoint *******************************/
+/* The hook for both a static (compiled) and a dynamic breakpoint set by GDB.
+ An internal stack is used by the stub. The register image of the caller is
+ stored in the structure register_image.
+ Interactive communication with the host is handled by handle_exception and
+ finally the register image is restored. */
+
+void kgdb_handle_breakpoint(void);
+
+asm ("
+ .global kgdb_handle_breakpoint
+kgdb_handle_breakpoint:
+;;
+;; Response to the break-instruction
+;;
+;; Create a register image of the caller
+;;
+ move $dccr,[reg+0x5E] ; Save the flags in DCCR before disable interrupts
+ di ; Disable interrupts
+ move.d $r0,[reg] ; Save R0
+ move.d $r1,[reg+0x04] ; Save R1
+ move.d $r2,[reg+0x08] ; Save R2
+ move.d $r3,[reg+0x0C] ; Save R3
+ move.d $r4,[reg+0x10] ; Save R4
+ move.d $r5,[reg+0x14] ; Save R5
+ move.d $r6,[reg+0x18] ; Save R6
+ move.d $r7,[reg+0x1C] ; Save R7
+ move.d $r8,[reg+0x20] ; Save R8
+ move.d $r9,[reg+0x24] ; Save R9
+ move.d $r10,[reg+0x28] ; Save R10
+ move.d $r11,[reg+0x2C] ; Save R11
+ move.d $r12,[reg+0x30] ; Save R12
+ move.d $r13,[reg+0x34] ; Save R13
+ move.d $sp,[reg+0x38] ; Save SP (R14)
+;; Due to the old assembler-versions BRP might not be recognized
+ .word 0xE670 ; move brp,$r0
+ subq 2,$r0 ; Set to address of previous instruction.
+ move.d $r0,[reg+0x3c] ; Save the address in PC (R15)
+ clear.b [reg+0x40] ; Clear P0
+ move $vr,[reg+0x41] ; Save special register P1
+ clear.w [reg+0x42] ; Clear P4
+ move $ccr,[reg+0x44] ; Save special register CCR
+ move $mof,[reg+0x46] ; P7
+ clear.d [reg+0x4A] ; Clear P8
+ move $ibr,[reg+0x4E] ; P9,
+ move $irp,[reg+0x52] ; P10,
+ move $srp,[reg+0x56] ; P11,
+ move $dtp0,[reg+0x5A] ; P12, register BAR, assembler might not know BAR
+ ; P13, register DCCR already saved
+;; Due to the old assembler-versions BRP might not be recognized
+ .word 0xE670 ; move brp,r0
+;; Static (compiled) breakpoints must return to the next instruction in order
+;; to avoid infinite loops. Dynamic (gdb-invoked) must restore the instruction
+;; in order to execute it when execution is continued.
+ test.b [is_dyn_brkp] ; Is this a dynamic breakpoint?
+ beq is_static ; No, a static breakpoint
+ nop
+ subq 2,$r0 ; rerun the instruction the break replaced
+is_static:
+ moveq 1,$r1
+ move.b $r1,[is_dyn_brkp] ; Set the state variable to dynamic breakpoint
+ move.d $r0,[reg+0x62] ; Save the return address in BRP
+ move $usp,[reg+0x66] ; USP
+;;
+;; Handle the communication
+;;
+ move.d internal_stack+1020,$sp ; Use the internal stack which grows upward
+ moveq 5,$r10 ; SIGTRAP
+ jsr handle_exception ; Interactive routine
+;;
+;; Return to the caller
+;;
+ move.d [reg],$r0 ; Restore R0
+ move.d [reg+0x04],$r1 ; Restore R1
+ move.d [reg+0x08],$r2 ; Restore R2
+ move.d [reg+0x0C],$r3 ; Restore R3
+ move.d [reg+0x10],$r4 ; Restore R4
+ move.d [reg+0x14],$r5 ; Restore R5
+ move.d [reg+0x18],$r6 ; Restore R6
+ move.d [reg+0x1C],$r7 ; Restore R7
+ move.d [reg+0x20],$r8 ; Restore R8
+ move.d [reg+0x24],$r9 ; Restore R9
+ move.d [reg+0x28],$r10 ; Restore R10
+ move.d [reg+0x2C],$r11 ; Restore R11
+ move.d [reg+0x30],$r12 ; Restore R12
+ move.d [reg+0x34],$r13 ; Restore R13
+;;
+;; FIXME: Which registers should be restored?
+;;
+ move.d [reg+0x38],$sp ; Restore SP (R14)
+ move [reg+0x56],$srp ; Restore the subroutine return pointer.
+ move [reg+0x5E],$dccr ; Restore DCCR
+ move [reg+0x66],$usp ; Restore USP
+ jump [reg+0x62] ; A jump to the content in register BRP works.
+ nop ;
+");
+
+/* The hook for an interrupt generated by GDB. An internal stack is used
+ by the stub. The register image of the caller is stored in the structure
+ register_image. Interactive communication with the host is handled by
+ handle_exception and finally the register image is restored. Due to the
+ old assembler which does not recognise the break instruction and the
+ breakpoint return pointer hex-code is used. */
+
+void kgdb_handle_serial(void);
+
+asm ("
+ .global kgdb_handle_serial
+kgdb_handle_serial:
+;;
+;; Response to a serial interrupt
+;;
+
+ move $dccr,[reg+0x5E] ; Save the flags in DCCR
+ di ; Disable interrupts
+ move.d $r0,[reg] ; Save R0
+ move.d $r1,[reg+0x04] ; Save R1
+ move.d $r2,[reg+0x08] ; Save R2
+ move.d $r3,[reg+0x0C] ; Save R3
+ move.d $r4,[reg+0x10] ; Save R4
+ move.d $r5,[reg+0x14] ; Save R5
+ move.d $r6,[reg+0x18] ; Save R6
+ move.d $r7,[reg+0x1C] ; Save R7
+ move.d $r8,[reg+0x20] ; Save R8
+ move.d $r9,[reg+0x24] ; Save R9
+ move.d $r10,[reg+0x28] ; Save R10
+ move.d $r11,[reg+0x2C] ; Save R11
+ move.d $r12,[reg+0x30] ; Save R12
+ move.d $r13,[reg+0x34] ; Save R13
+ move.d $sp,[reg+0x38] ; Save SP (R14)
+ move $irp,[reg+0x3c] ; Save the address in PC (R15)
+ clear.b [reg+0x40] ; Clear P0
+ move $vr,[reg+0x41] ; Save special register P1,
+ clear.w [reg+0x42] ; Clear P4
+ move $ccr,[reg+0x44] ; Save special register CCR
+ move $mof,[reg+0x46] ; P7
+ clear.d [reg+0x4A] ; Clear P8
+ move $ibr,[reg+0x4E] ; P9,
+ move $irp,[reg+0x52] ; P10,
+ move $srp,[reg+0x56] ; P11,
+ move $dtp0,[reg+0x5A] ; P12, register BAR, assembler might not know BAR
+ ; P13, register DCCR already saved
+;; Due to the old assembler-versions BRP might not be recognized
+ .word 0xE670 ; move brp,r0
+ move.d $r0,[reg+0x62] ; Save the return address in BRP
+ move $usp,[reg+0x66] ; USP
+
+;; get the serial character (from debugport.c) and check if it is a ctrl-c
+
+ jsr getDebugChar
+ cmp.b 3, $r10
+ bne goback
+ nop
+
+;;
+;; Handle the communication
+;;
+ move.d internal_stack+1020,$sp ; Use the internal stack
+ moveq 2,$r10 ; SIGINT
+ jsr handle_exception ; Interactive routine
+
+goback:
+;;
+;; Return to the caller
+;;
+ move.d [reg],$r0 ; Restore R0
+ move.d [reg+0x04],$r1 ; Restore R1
+ move.d [reg+0x08],$r2 ; Restore R2
+ move.d [reg+0x0C],$r3 ; Restore R3
+ move.d [reg+0x10],$r4 ; Restore R4
+ move.d [reg+0x14],$r5 ; Restore R5
+ move.d [reg+0x18],$r6 ; Restore R6
+ move.d [reg+0x1C],$r7 ; Restore R7
+ move.d [reg+0x20],$r8 ; Restore R8
+ move.d [reg+0x24],$r9 ; Restore R9
+ move.d [reg+0x28],$r10 ; Restore R10
+ move.d [reg+0x2C],$r11 ; Restore R11
+ move.d [reg+0x30],$r12 ; Restore R12
+ move.d [reg+0x34],$r13 ; Restore R13
+;;
+;; FIXME: Which registers should be restored?
+;;
+ move.d [reg+0x38],$sp ; Restore SP (R14)
+ move [reg+0x56],$srp ; Restore the subroutine return pointer.
+ move [reg+0x5E],$dccr ; Restore DCCR
+ move [reg+0x66],$usp ; Restore USP
+ reti ; Return from the interrupt routine
+ nop
+");
+
+/* Use this static breakpoint in the start-up only. */
+
+void
+breakpoint(void)
+{
+ kgdb_started = 1;
+ is_dyn_brkp = 0; /* This is a static, not a dynamic breakpoint. */
+ __asm__ volatile ("break 8"); /* Jump to handle_breakpoint. */
+}
+
+/* initialize kgdb. doesn't break into the debugger, but sets up irq and ports */
+
+void
+kgdb_init(void)
+{
+ /* could initialize debug port as well but it's done in head.S already... */
+
+ /* breakpoint handler is now set in irq.c */
+ set_int_vector(8, kgdb_handle_serial);
+
+ enableDebugIRQ();
+}
+
+/****************************** End of file **********************************/
diff --git a/arch/cris/arch-v10/kernel/process.c b/arch/cris/arch-v10/kernel/process.c
new file mode 100644
index 00000000000..87ff3779082
--- /dev/null
+++ b/arch/cris/arch-v10/kernel/process.c
@@ -0,0 +1,270 @@
+/* $Id: process.c,v 1.9 2004/10/19 13:07:37 starvik Exp $
+ *
+ * linux/arch/cris/kernel/process.c
+ *
+ * Copyright (C) 1995 Linus Torvalds
+ * Copyright (C) 2000-2002 Axis Communications AB
+ *
+ * Authors: Bjorn Wesen (bjornw@axis.com)
+ * Mikael Starvik (starvik@axis.com)
+ *
+ * This file handles the architecture-dependent parts of process handling..
+ */
+
+#include <linux/config.h>
+#include <linux/sched.h>
+#include <linux/err.h>
+#include <linux/fs.h>
+#include <linux/slab.h>
+#include <asm/arch/svinto.h>
+#include <linux/init.h>
+
+#ifdef CONFIG_ETRAX_GPIO
+void etrax_gpio_wake_up_check(void); /* drivers/gpio.c */
+#endif
+
+/*
+ * We use this if we don't have any better
+ * idle routine..
+ */
+void default_idle(void)
+{
+#ifdef CONFIG_ETRAX_GPIO
+ etrax_gpio_wake_up_check();
+#endif
+}
+
+/*
+ * Free current thread data structures etc..
+ */
+
+void exit_thread(void)
+{
+ /* Nothing needs to be done. */
+}
+
+/* if the watchdog is enabled, we can simply disable interrupts and go
+ * into an eternal loop, and the watchdog will reset the CPU after 0.1s
+ * if on the other hand the watchdog wasn't enabled, we just enable it and wait
+ */
+
+void hard_reset_now (void)
+{
+ /*
+ * Don't declare this variable elsewhere. We don't want any other
+ * code to know about it than the watchdog handler in entry.S and
+ * this code, implementing hard reset through the watchdog.
+ */
+#if defined(CONFIG_ETRAX_WATCHDOG) && !defined(CONFIG_SVINTO_SIM)
+ extern int cause_of_death;
+#endif
+
+ printk("*** HARD RESET ***\n");
+ local_irq_disable();
+
+#if defined(CONFIG_ETRAX_WATCHDOG) && !defined(CONFIG_SVINTO_SIM)
+ cause_of_death = 0xbedead;
+#else
+ /* Since we dont plan to keep on reseting the watchdog,
+ the key can be arbitrary hence three */
+ *R_WATCHDOG = IO_FIELD(R_WATCHDOG, key, 3) |
+ IO_STATE(R_WATCHDOG, enable, start);
+#endif
+
+ while(1) /* waiting for RETRIBUTION! */ ;
+}
+
+/*
+ * Return saved PC of a blocked thread.
+ */
+unsigned long thread_saved_pc(struct task_struct *t)
+{
+ return (unsigned long)user_regs(t->thread_info)->irp;
+}
+
+static void kernel_thread_helper(void* dummy, int (*fn)(void *), void * arg)
+{
+ fn(arg);
+ do_exit(-1); /* Should never be called, return bad exit value */
+}
+
+/*
+ * Create a kernel thread
+ */
+int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags)
+{
+ struct pt_regs regs;
+
+ memset(&regs, 0, sizeof(regs));
+
+ /* Don't use r10 since that is set to 0 in copy_thread */
+ regs.r11 = (unsigned long)fn;
+ regs.r12 = (unsigned long)arg;
+ regs.irp = (unsigned long)kernel_thread_helper;
+
+ /* Ok, create the new process.. */
+ return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, &regs, 0, NULL, NULL);
+}
+
+/* setup the child's kernel stack with a pt_regs and switch_stack on it.
+ * it will be un-nested during _resume and _ret_from_sys_call when the
+ * new thread is scheduled.
+ *
+ * also setup the thread switching structure which is used to keep
+ * thread-specific data during _resumes.
+ *
+ */
+asmlinkage void ret_from_fork(void);
+
+int copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
+ unsigned long unused,
+ struct task_struct *p, struct pt_regs *regs)
+{
+ struct pt_regs * childregs;
+ struct switch_stack *swstack;
+
+ /* put the pt_regs structure at the end of the new kernel stack page and fix it up
+ * remember that the task_struct doubles as the kernel stack for the task
+ */
+
+ childregs = user_regs(p->thread_info);
+
+ *childregs = *regs; /* struct copy of pt_regs */
+
+ p->set_child_tid = p->clear_child_tid = NULL;
+
+ childregs->r10 = 0; /* child returns 0 after a fork/clone */
+
+ /* put the switch stack right below the pt_regs */
+
+ swstack = ((struct switch_stack *)childregs) - 1;
+
+ swstack->r9 = 0; /* parameter to ret_from_sys_call, 0 == dont restart the syscall */
+
+ /* we want to return into ret_from_sys_call after the _resume */
+
+ swstack->return_ip = (unsigned long) ret_from_fork; /* Will call ret_from_sys_call */
+
+ /* fix the user-mode stackpointer */
+
+ p->thread.usp = usp;
+
+ /* and the kernel-mode one */
+
+ p->thread.ksp = (unsigned long) swstack;
+
+#ifdef DEBUG
+ printk("copy_thread: new regs at 0x%p, as shown below:\n", childregs);
+ show_registers(childregs);
+#endif
+
+ return 0;
+}
+
+/*
+ * Be aware of the "magic" 7th argument in the four system-calls below.
+ * They need the latest stackframe, which is put as the 7th argument by
+ * entry.S. The previous arguments are dummies or actually used, but need
+ * to be defined to reach the 7th argument.
+ *
+ * N.B.: Another method to get the stackframe is to use current_regs(). But
+ * it returns the latest stack-frame stacked when going from _user mode_ and
+ * some of these (at least sys_clone) are called from kernel-mode sometimes
+ * (for example during kernel_thread, above) and thus cannot use it. Thus,
+ * to be sure not to get any surprises, we use the method for the other calls
+ * as well.
+ */
+
+asmlinkage int sys_fork(long r10, long r11, long r12, long r13, long mof, long srp,
+ struct pt_regs *regs)
+{
+ return do_fork(SIGCHLD, rdusp(), regs, 0, NULL, NULL);
+}
+
+/* if newusp is 0, we just grab the old usp */
+/* FIXME: Is parent_tid/child_tid really third/fourth argument? Update lib? */
+asmlinkage int sys_clone(unsigned long newusp, unsigned long flags,
+ int* parent_tid, int* child_tid, long mof, long srp,
+ struct pt_regs *regs)
+{
+ if (!newusp)
+ newusp = rdusp();
+ return do_fork(flags, newusp, regs, 0, parent_tid, child_tid);
+}
+
+/* vfork is a system call in i386 because of register-pressure - maybe
+ * we can remove it and handle it in libc but we put it here until then.
+ */
+
+asmlinkage int sys_vfork(long r10, long r11, long r12, long r13, long mof, long srp,
+ struct pt_regs *regs)
+{
+ return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, rdusp(), regs, 0, NULL, NULL);
+}
+
+/*
+ * sys_execve() executes a new program.
+ */
+asmlinkage int sys_execve(const char *fname, char **argv, char **envp,
+ long r13, long mof, long srp,
+ struct pt_regs *regs)
+{
+ int error;
+ char *filename;
+
+ filename = getname(fname);
+ error = PTR_ERR(filename);
+
+ if (IS_ERR(filename))
+ goto out;
+ error = do_execve(filename, argv, envp, regs);
+ putname(filename);
+ out:
+ return error;
+}
+
+unsigned long get_wchan(struct task_struct *p)
+{
+#if 0
+ /* YURGH. TODO. */
+
+ unsigned long ebp, esp, eip;
+ unsigned long stack_page;
+ int count = 0;
+ if (!p || p == current || p->state == TASK_RUNNING)
+ return 0;
+ stack_page = (unsigned long)p;
+ esp = p->thread.esp;
+ if (!stack_page || esp < stack_page || esp > 8188+stack_page)
+ return 0;
+ /* include/asm-i386/system.h:switch_to() pushes ebp last. */
+ ebp = *(unsigned long *) esp;
+ do {
+ if (ebp < stack_page || ebp > 8184+stack_page)
+ return 0;
+ eip = *(unsigned long *) (ebp+4);
+ if (!in_sched_functions(eip))
+ return eip;
+ ebp = *(unsigned long *) ebp;
+ } while (count++ < 16);
+#endif
+ return 0;
+}
+#undef last_sched
+#undef first_sched
+
+void show_regs(struct pt_regs * regs)
+{
+ unsigned long usp = rdusp();
+ printk("IRP: %08lx SRP: %08lx DCCR: %08lx USP: %08lx MOF: %08lx\n",
+ regs->irp, regs->srp, regs->dccr, usp, regs->mof );
+ printk(" r0: %08lx r1: %08lx r2: %08lx r3: %08lx\n",
+ regs->r0, regs->r1, regs->r2, regs->r3);
+ printk(" r4: %08lx r5: %08lx r6: %08lx r7: %08lx\n",
+ regs->r4, regs->r5, regs->r6, regs->r7);
+ printk(" r8: %08lx r9: %08lx r10: %08lx r11: %08lx\n",
+ regs->r8, regs->r9, regs->r10, regs->r11);
+ printk("r12: %08lx r13: %08lx oR10: %08lx\n",
+ regs->r12, regs->r13, regs->orig_r10);
+}
+
diff --git a/arch/cris/arch-v10/kernel/ptrace.c b/arch/cris/arch-v10/kernel/ptrace.c
new file mode 100644
index 00000000000..da15db8ae48
--- /dev/null
+++ b/arch/cris/arch-v10/kernel/ptrace.c
@@ -0,0 +1,314 @@
+/*
+ * Copyright (C) 2000-2003, Axis Communications AB.
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/user.h>
+
+#include <asm/uaccess.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/processor.h>
+
+/*
+ * Determines which bits in DCCR the user has access to.
+ * 1 = access, 0 = no access.
+ */
+#define DCCR_MASK 0x0000001f /* XNZVC */
+
+/*
+ * Get contents of register REGNO in task TASK.
+ */
+inline long get_reg(struct task_struct *task, unsigned int regno)
+{
+ /* USP is a special case, it's not in the pt_regs struct but
+ * in the tasks thread struct
+ */
+
+ if (regno == PT_USP)
+ return task->thread.usp;
+ else if (regno < PT_MAX)
+ return ((unsigned long *)user_regs(task->thread_info))[regno];
+ else
+ return 0;
+}
+
+/*
+ * Write contents of register REGNO in task TASK.
+ */
+inline int put_reg(struct task_struct *task, unsigned int regno,
+ unsigned long data)
+{
+ if (regno == PT_USP)
+ task->thread.usp = data;
+ else if (regno < PT_MAX)
+ ((unsigned long *)user_regs(task->thread_info))[regno] = data;
+ else
+ return -1;
+ return 0;
+}
+
+/*
+ * Called by kernel/ptrace.c when detaching.
+ *
+ * Make sure the single step bit is not set.
+ */
+void
+ptrace_disable(struct task_struct *child)
+{
+ /* Todo - pending singlesteps? */
+}
+
+/*
+ * Note that this implementation of ptrace behaves differently from vanilla
+ * ptrace. Contrary to what the man page says, in the PTRACE_PEEKTEXT,
+ * PTRACE_PEEKDATA, and PTRACE_PEEKUSER requests the data variable is not
+ * ignored. Instead, the data variable is expected to point at a location
+ * (in user space) where the result of the ptrace call is written (instead of
+ * being returned).
+ */
+asmlinkage int
+sys_ptrace(long request, long pid, long addr, long data)
+{
+ struct task_struct *child;
+ int ret;
+ unsigned long __user *datap = (unsigned long __user *)data;
+
+ lock_kernel();
+ ret = -EPERM;
+
+ if (request == PTRACE_TRACEME) {
+ if (current->ptrace & PT_PTRACED)
+ goto out;
+
+ current->ptrace |= PT_PTRACED;
+ ret = 0;
+ goto out;
+ }
+
+ ret = -ESRCH;
+ read_lock(&tasklist_lock);
+ child = find_task_by_pid(pid);
+
+ if (child)
+ get_task_struct(child);
+
+ read_unlock(&tasklist_lock);
+
+ if (!child)
+ goto out;
+
+ ret = -EPERM;
+
+ if (pid == 1) /* Leave the init process alone! */
+ goto out_tsk;
+
+ if (request == PTRACE_ATTACH) {
+ ret = ptrace_attach(child);
+ goto out_tsk;
+ }
+
+ ret = ptrace_check_attach(child, request == PTRACE_KILL);
+ if (ret < 0)
+ goto out_tsk;
+
+ switch (request) {
+ /* Read word at location address. */
+ case PTRACE_PEEKTEXT:
+ case PTRACE_PEEKDATA: {
+ unsigned long tmp;
+ int copied;
+
+ copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0);
+ ret = -EIO;
+
+ if (copied != sizeof(tmp))
+ break;
+
+ ret = put_user(tmp,datap);
+ break;
+ }
+
+ /* Read the word at location address in the USER area. */
+ case PTRACE_PEEKUSR: {
+ unsigned long tmp;
+
+ ret = -EIO;
+ if ((addr & 3) || addr < 0 || addr > PT_MAX << 2)
+ break;
+
+ tmp = get_reg(child, addr >> 2);
+ ret = put_user(tmp, datap);
+ break;
+ }
+
+ /* Write the word at location address. */
+ case PTRACE_POKETEXT:
+ case PTRACE_POKEDATA:
+ ret = 0;
+
+ if (access_process_vm(child, addr, &data, sizeof(data), 1) == sizeof(data))
+ break;
+
+ ret = -EIO;
+ break;
+
+ /* Write the word at location address in the USER area. */
+ case PTRACE_POKEUSR:
+ ret = -EIO;
+ if ((addr & 3) || addr < 0 || addr > PT_MAX << 2)
+ break;
+
+ addr >>= 2;
+
+ if (addr == PT_DCCR) {
+ /* don't allow the tracing process to change stuff like
+ * interrupt enable, kernel/user bit, dma enables etc.
+ */
+ data &= DCCR_MASK;
+ data |= get_reg(child, PT_DCCR) & ~DCCR_MASK;
+ }
+ if (put_reg(child, addr, data))
+ break;
+ ret = 0;
+ break;
+
+ case PTRACE_SYSCALL:
+ case PTRACE_CONT:
+ ret = -EIO;
+
+ if ((unsigned long) data > _NSIG)
+ break;
+
+ if (request == PTRACE_SYSCALL) {
+ set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+ }
+ else {
+ clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+ }
+
+ child->exit_code = data;
+
+ /* TODO: make sure any pending breakpoint is killed */
+ wake_up_process(child);
+ ret = 0;
+
+ break;
+
+ /* Make the child exit by sending it a sigkill. */
+ case PTRACE_KILL:
+ ret = 0;
+
+ if (child->state == TASK_ZOMBIE)
+ break;
+
+ child->exit_code = SIGKILL;
+
+ /* TODO: make sure any pending breakpoint is killed */
+ wake_up_process(child);
+ break;
+
+ /* Set the trap flag. */
+ case PTRACE_SINGLESTEP:
+ ret = -EIO;
+
+ if ((unsigned long) data > _NSIG)
+ break;
+
+ clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+
+ /* TODO: set some clever breakpoint mechanism... */
+
+ child->exit_code = data;
+ wake_up_process(child);
+ ret = 0;
+ break;
+
+ case PTRACE_DETACH:
+ ret = ptrace_detach(child, data);
+ break;
+
+ /* Get all GP registers from the child. */
+ case PTRACE_GETREGS: {
+ int i;
+ unsigned long tmp;
+
+ for (i = 0; i <= PT_MAX; i++) {
+ tmp = get_reg(child, i);
+
+ if (put_user(tmp, datap)) {
+ ret = -EFAULT;
+ goto out_tsk;
+ }
+
+ data += sizeof(long);
+ }
+
+ ret = 0;
+ break;
+ }
+
+ /* Set all GP registers in the child. */
+ case PTRACE_SETREGS: {
+ int i;
+ unsigned long tmp;
+
+ for (i = 0; i <= PT_MAX; i++) {
+ if (get_user(tmp, datap)) {
+ ret = -EFAULT;
+ goto out_tsk;
+ }
+
+ if (i == PT_DCCR) {
+ tmp &= DCCR_MASK;
+ tmp |= get_reg(child, PT_DCCR) & ~DCCR_MASK;
+ }
+
+ put_reg(child, i, tmp);
+ data += sizeof(long);
+ }
+
+ ret = 0;
+ break;
+ }
+
+ default:
+ ret = ptrace_request(child, request, addr, data);
+ break;
+ }
+out_tsk:
+ put_task_struct(child);
+out:
+ unlock_kernel();
+ return ret;
+}
+
+void do_syscall_trace(void)
+{
+ if (!test_thread_flag(TIF_SYSCALL_TRACE))
+ return;
+
+ if (!(current->ptrace & PT_PTRACED))
+ return;
+
+ /* the 0x80 provides a way for the tracing parent to distinguish
+ between a syscall stop and SIGTRAP delivery */
+ ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
+ ? 0x80 : 0));
+
+ /*
+ * This isn't the same as continuing with a signal, but it will do for
+ * normal use.
+ */
+ if (current->exit_code) {
+ send_sig(current->exit_code, current, 1);
+ current->exit_code = 0;
+ }
+}
diff --git a/arch/cris/arch-v10/kernel/setup.c b/arch/cris/arch-v10/kernel/setup.c
new file mode 100644
index 00000000000..b668d7fb68e
--- /dev/null
+++ b/arch/cris/arch-v10/kernel/setup.c
@@ -0,0 +1,103 @@
+/*
+ *
+ * linux/arch/cris/arch-v10/kernel/setup.c
+ *
+ * Copyright (C) 1995 Linus Torvalds
+ * Copyright (c) 2001-2002 Axis Communications AB
+ */
+
+/*
+ * This file handles the architecture-dependent parts of initialization
+ */
+
+#include <linux/config.h>
+#include <linux/seq_file.h>
+#include <linux/proc_fs.h>
+#include <linux/delay.h>
+
+#ifdef CONFIG_PROC_FS
+#define HAS_FPU 0x0001
+#define HAS_MMU 0x0002
+#define HAS_ETHERNET100 0x0004
+#define HAS_TOKENRING 0x0008
+#define HAS_SCSI 0x0010
+#define HAS_ATA 0x0020
+#define HAS_USB 0x0040
+#define HAS_IRQ_BUG 0x0080
+#define HAS_MMU_BUG 0x0100
+
+static struct cpu_info {
+ char *model;
+ unsigned short cache;
+ unsigned short flags;
+} cpu_info[] = {
+ /* The first four models will never ever run this code and are
+ only here for display. */
+ { "ETRAX 1", 0, 0 },
+ { "ETRAX 2", 0, 0 },
+ { "ETRAX 3", 0, HAS_TOKENRING },
+ { "ETRAX 4", 0, HAS_TOKENRING | HAS_SCSI },
+ { "Unknown", 0, 0 },
+ { "Unknown", 0, 0 },
+ { "Unknown", 0, 0 },
+ { "Simulator", 8, HAS_ETHERNET100 | HAS_SCSI | HAS_ATA },
+ { "ETRAX 100", 8, HAS_ETHERNET100 | HAS_SCSI | HAS_ATA | HAS_IRQ_BUG },
+ { "ETRAX 100", 8, HAS_ETHERNET100 | HAS_SCSI | HAS_ATA },
+ { "ETRAX 100LX", 8, HAS_ETHERNET100 | HAS_SCSI | HAS_ATA | HAS_USB | HAS_MMU | HAS_MMU_BUG },
+ { "ETRAX 100LX v2", 8, HAS_ETHERNET100 | HAS_SCSI | HAS_ATA | HAS_USB | HAS_MMU },
+ { "Unknown", 0, 0 } /* This entry MUST be the last */
+};
+
+int show_cpuinfo(struct seq_file *m, void *v)
+{
+ unsigned long revision;
+ struct cpu_info *info;
+
+ /* read the version register in the CPU and print some stuff */
+
+ revision = rdvr();
+
+ if (revision >= sizeof cpu_info/sizeof *cpu_info)
+ info = &cpu_info[sizeof cpu_info/sizeof *cpu_info - 1];
+ else
+ info = &cpu_info[revision];
+
+ return seq_printf(m,
+ "processor\t: 0\n"
+ "cpu\t\t: CRIS\n"
+ "cpu revision\t: %lu\n"
+ "cpu model\t: %s\n"
+ "cache size\t: %d kB\n"
+ "fpu\t\t: %s\n"
+ "mmu\t\t: %s\n"
+ "mmu DMA bug\t: %s\n"
+ "ethernet\t: %s Mbps\n"
+ "token ring\t: %s\n"
+ "scsi\t\t: %s\n"
+ "ata\t\t: %s\n"
+ "usb\t\t: %s\n"
+ "bogomips\t: %lu.%02lu\n",
+
+ revision,
+ info->model,
+ info->cache,
+ info->flags & HAS_FPU ? "yes" : "no",
+ info->flags & HAS_MMU ? "yes" : "no",
+ info->flags & HAS_MMU_BUG ? "yes" : "no",
+ info->flags & HAS_ETHERNET100 ? "10/100" : "10",
+ info->flags & HAS_TOKENRING ? "4/16 Mbps" : "no",
+ info->flags & HAS_SCSI ? "yes" : "no",
+ info->flags & HAS_ATA ? "yes" : "no",
+ info->flags & HAS_USB ? "yes" : "no",
+ (loops_per_jiffy * HZ + 500) / 500000,
+ ((loops_per_jiffy * HZ + 500) / 5000) % 100);
+}
+
+#endif /* CONFIG_PROC_FS */
+
+void
+show_etrax_copyright(void)
+{
+ printk(KERN_INFO
+ "Linux/CRIS port on ETRAX 100LX (c) 2001 Axis Communications AB\n");
+}
diff --git a/arch/cris/arch-v10/kernel/shadows.c b/arch/cris/arch-v10/kernel/shadows.c
new file mode 100644
index 00000000000..561a890a8e4
--- /dev/null
+++ b/arch/cris/arch-v10/kernel/shadows.c
@@ -0,0 +1,36 @@
+/* $Id: shadows.c,v 1.1 2001/12/17 13:59:27 bjornw Exp $
+ *
+ * Various shadow registers. Defines for these are in include/asm-etrax100/io.h
+ */
+
+/* Shadows for internal Etrax-registers */
+
+unsigned long genconfig_shadow;
+unsigned long port_g_data_shadow;
+unsigned char port_pa_dir_shadow;
+unsigned char port_pa_data_shadow;
+unsigned char port_pb_i2c_shadow;
+unsigned char port_pb_config_shadow;
+unsigned char port_pb_dir_shadow;
+unsigned char port_pb_data_shadow;
+unsigned long r_timer_ctrl_shadow;
+
+/* Shadows for external I/O port registers.
+ * These are only usable if there actually IS a latch connected
+ * to the corresponding external chip-select pin.
+ *
+ * A common usage is that CSP0 controls LED's and CSP4 video chips.
+ */
+
+unsigned long port_cse1_shadow;
+unsigned long port_csp0_shadow;
+unsigned long port_csp4_shadow;
+
+/* Corresponding addresses for the ports.
+ * These are initialized in arch/cris/mm/init.c using ioremap.
+ */
+
+volatile unsigned long *port_cse1_addr;
+volatile unsigned long *port_csp0_addr;
+volatile unsigned long *port_csp4_addr;
+
diff --git a/arch/cris/arch-v10/kernel/signal.c b/arch/cris/arch-v10/kernel/signal.c
new file mode 100644
index 00000000000..85e0032e664
--- /dev/null
+++ b/arch/cris/arch-v10/kernel/signal.c
@@ -0,0 +1,580 @@
+/*
+ * linux/arch/cris/kernel/signal.c
+ *
+ * Based on arch/i386/kernel/signal.c by
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ * 1997-11-28 Modified for POSIX.1b signals by Richard Henderson *
+ *
+ * Ideas also taken from arch/arm.
+ *
+ * Copyright (C) 2000, 2001 Axis Communications AB
+ *
+ * Authors: Bjorn Wesen (bjornw@axis.com)
+ *
+ */
+
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/errno.h>
+#include <linux/wait.h>
+#include <linux/ptrace.h>
+#include <linux/unistd.h>
+#include <linux/stddef.h>
+
+#include <asm/processor.h>
+#include <asm/ucontext.h>
+#include <asm/uaccess.h>
+
+#define DEBUG_SIG 0
+
+#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
+
+/* a syscall in Linux/CRIS is a break 13 instruction which is 2 bytes */
+/* manipulate regs so that upon return, it will be re-executed */
+
+/* We rely on that pc points to the instruction after "break 13", so the
+ * library must never do strange things like putting it in a delay slot.
+ */
+#define RESTART_CRIS_SYS(regs) regs->r10 = regs->orig_r10; regs->irp -= 2;
+
+int do_signal(int canrestart, sigset_t *oldset, struct pt_regs *regs);
+
+/*
+ * Atomically swap in the new signal mask, and wait for a signal. Define
+ * dummy arguments to be able to reach the regs argument. (Note that this
+ * arrangement relies on old_sigset_t occupying one register.)
+ */
+int
+sys_sigsuspend(old_sigset_t mask, long r11, long r12, long r13, long mof,
+ long srp, struct pt_regs *regs)
+{
+ sigset_t saveset;
+
+ mask &= _BLOCKABLE;
+ spin_lock_irq(&current->sighand->siglock);
+ saveset = current->blocked;
+ siginitset(&current->blocked, mask);
+ recalc_sigpending();
+ spin_unlock_irq(&current->sighand->siglock);
+
+ regs->r10 = -EINTR;
+ while (1) {
+ current->state = TASK_INTERRUPTIBLE;
+ schedule();
+ if (do_signal(0, &saveset, regs))
+ /* We will get here twice: once to call the signal
+ handler, then again to return from the
+ sigsuspend system call. When calling the
+ signal handler, R10 holds the signal number as
+ set through do_signal. The sigsuspend call
+ will return with the restored value set above;
+ always -EINTR. */
+ return regs->r10;
+ }
+}
+
+/* Define dummy arguments to be able to reach the regs argument. (Note that
+ * this arrangement relies on size_t occupying one register.)
+ */
+int
+sys_rt_sigsuspend(sigset_t *unewset, size_t sigsetsize, long r12, long r13,
+ long mof, long srp, struct pt_regs *regs)
+{
+ sigset_t saveset, newset;
+
+ /* XXX: Don't preclude handling different sized sigset_t's. */
+ if (sigsetsize != sizeof(sigset_t))
+ return -EINVAL;
+
+ if (copy_from_user(&newset, unewset, sizeof(newset)))
+ return -EFAULT;
+ sigdelsetmask(&newset, ~_BLOCKABLE);
+
+ spin_lock_irq(&current->sighand->siglock);
+ saveset = current->blocked;
+ current->blocked = newset;
+ recalc_sigpending();
+ spin_unlock_irq(&current->sighand->siglock);
+
+ regs->r10 = -EINTR;
+ while (1) {
+ current->state = TASK_INTERRUPTIBLE;
+ schedule();
+ if (do_signal(0, &saveset, regs))
+ /* We will get here twice: once to call the signal
+ handler, then again to return from the
+ sigsuspend system call. When calling the
+ signal handler, R10 holds the signal number as
+ set through do_signal. The sigsuspend call
+ will return with the restored value set above;
+ always -EINTR. */
+ return regs->r10;
+ }
+}
+
+int
+sys_sigaction(int sig, const struct old_sigaction __user *act,
+ struct old_sigaction *oact)
+{
+ struct k_sigaction new_ka, old_ka;
+ int ret;
+
+ if (act) {
+ old_sigset_t mask;
+ if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
+ __get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
+ __get_user(new_ka.sa.sa_restorer, &act->sa_restorer))
+ return -EFAULT;
+ __get_user(new_ka.sa.sa_flags, &act->sa_flags);
+ __get_user(mask, &act->sa_mask);
+ siginitset(&new_ka.sa.sa_mask, mask);
+ }
+
+ ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
+
+ if (!ret && oact) {
+ if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
+ __put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
+ __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer))
+ return -EFAULT;
+ __put_user(old_ka.sa.sa_flags, &oact->sa_flags);
+ __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask);
+ }
+
+ return ret;
+}
+
+int
+sys_sigaltstack(const stack_t *uss, stack_t __user *uoss)
+{
+ return do_sigaltstack(uss, uoss, rdusp());
+}
+
+
+/*
+ * Do a signal return; undo the signal stack.
+ */
+
+struct sigframe {
+ struct sigcontext sc;
+ unsigned long extramask[_NSIG_WORDS-1];
+ unsigned char retcode[8]; /* trampoline code */
+};
+
+struct rt_sigframe {
+ struct siginfo *pinfo;
+ void *puc;
+ struct siginfo info;
+ struct ucontext uc;
+ unsigned char retcode[8]; /* trampoline code */
+};
+
+
+static int
+restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
+{
+ unsigned int err = 0;
+ unsigned long old_usp;
+
+ /* Always make any pending restarted system calls return -EINTR */
+ current_thread_info()->restart_block.fn = do_no_restart_syscall;
+
+ /* restore the regs from &sc->regs (same as sc, since regs is first)
+ * (sc is already checked for VERIFY_READ since the sigframe was
+ * checked in sys_sigreturn previously)
+ */
+
+ if (__copy_from_user(regs, sc, sizeof(struct pt_regs)))
+ goto badframe;
+
+ /* make sure the U-flag is set so user-mode cannot fool us */
+
+ regs->dccr |= 1 << 8;
+
+ /* restore the old USP as it was before we stacked the sc etc.
+ * (we cannot just pop the sigcontext since we aligned the sp and
+ * stuff after pushing it)
+ */
+
+ err |= __get_user(old_usp, &sc->usp);
+
+ wrusp(old_usp);
+
+ /* TODO: the other ports use regs->orig_XX to disable syscall checks
+ * after this completes, but we don't use that mechanism. maybe we can
+ * use it now ?
+ */
+
+ return err;
+
+badframe:
+ return 1;
+}
+
+/* Define dummy arguments to be able to reach the regs argument. */
+
+asmlinkage int sys_sigreturn(long r10, long r11, long r12, long r13, long mof,
+ long srp, struct pt_regs *regs)
+{
+ struct sigframe __user *frame = (struct sigframe *)rdusp();
+ sigset_t set;
+
+ /*
+ * Since we stacked the signal on a dword boundary,
+ * then frame should be dword aligned here. If it's
+ * not, then the user is trying to mess with us.
+ */
+ if (((long)frame) & 3)
+ goto badframe;
+
+ if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
+ goto badframe;
+ if (__get_user(set.sig[0], &frame->sc.oldmask)
+ || (_NSIG_WORDS > 1
+ && __copy_from_user(&set.sig[1], frame->extramask,
+ sizeof(frame->extramask))))
+ goto badframe;
+
+ sigdelsetmask(&set, ~_BLOCKABLE);
+ spin_lock_irq(&current->sighand->siglock);
+ current->blocked = set;
+ recalc_sigpending();
+ spin_unlock_irq(&current->sighand->siglock);
+
+ if (restore_sigcontext(regs, &frame->sc))
+ goto badframe;
+
+ /* TODO: SIGTRAP when single-stepping as in arm ? */
+
+ return regs->r10;
+
+badframe:
+ force_sig(SIGSEGV, current);
+ return 0;
+}
+
+/* Define dummy arguments to be able to reach the regs argument. */
+
+asmlinkage int sys_rt_sigreturn(long r10, long r11, long r12, long r13,
+ long mof, long srp, struct pt_regs *regs)
+{
+ struct rt_sigframe __user *frame = (struct rt_sigframe *)rdusp();
+ sigset_t set;
+
+ /*
+ * Since we stacked the signal on a dword boundary,
+ * then frame should be dword aligned here. If it's
+ * not, then the user is trying to mess with us.
+ */
+ if (((long)frame) & 3)
+ goto badframe;
+
+ if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
+ goto badframe;
+ if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
+ goto badframe;
+
+ sigdelsetmask(&set, ~_BLOCKABLE);
+ spin_lock_irq(&current->sighand->siglock);
+ current->blocked = set;
+ recalc_sigpending();
+ spin_unlock_irq(&current->sighand->siglock);
+
+ if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
+ goto badframe;
+
+ if (do_sigaltstack(&frame->uc.uc_stack, NULL, rdusp()) == -EFAULT)
+ goto badframe;
+
+ return regs->r10;
+
+badframe:
+ force_sig(SIGSEGV, current);
+ return 0;
+}
+
+/*
+ * Set up a signal frame.
+ */
+
+static int
+setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, unsigned long mask)
+{
+ int err = 0;
+ unsigned long usp = rdusp();
+
+ /* copy the regs. they are first in sc so we can use sc directly */
+
+ err |= __copy_to_user(sc, regs, sizeof(struct pt_regs));
+
+ /* Set the frametype to CRIS_FRAME_NORMAL for the execution of
+ the signal handler. The frametype will be restored to its previous
+ value in restore_sigcontext. */
+ regs->frametype = CRIS_FRAME_NORMAL;
+
+ /* then some other stuff */
+
+ err |= __put_user(mask, &sc->oldmask);
+
+ err |= __put_user(usp, &sc->usp);
+
+ return err;
+}
+
+/* figure out where we want to put the new signal frame - usually on the stack */
+
+static inline void __user *
+get_sigframe(struct k_sigaction *ka, struct pt_regs * regs, size_t frame_size)
+{
+ unsigned long sp = rdusp();
+
+ /* This is the X/Open sanctioned signal stack switching. */
+ if (ka->sa.sa_flags & SA_ONSTACK) {
+ if (! on_sig_stack(sp))
+ sp = current->sas_ss_sp + current->sas_ss_size;
+ }
+
+ /* make sure the frame is dword-aligned */
+
+ sp &= ~3;
+
+ return (void __user*)(sp - frame_size);
+}
+
+/* grab and setup a signal frame.
+ *
+ * basically we stack a lot of state info, and arrange for the
+ * user-mode program to return to the kernel using either a
+ * trampoline which performs the syscall sigreturn, or a provided
+ * user-mode trampoline.
+ */
+
+static void setup_frame(int sig, struct k_sigaction *ka,
+ sigset_t *set, struct pt_regs * regs)
+{
+ struct sigframe __user *frame;
+ unsigned long return_ip;
+ int err = 0;
+
+ frame = get_sigframe(ka, regs, sizeof(*frame));
+
+ if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
+ goto give_sigsegv;
+
+ err |= setup_sigcontext(&frame->sc, regs, set->sig[0]);
+ if (err)
+ goto give_sigsegv;
+
+ if (_NSIG_WORDS > 1) {
+ err |= __copy_to_user(frame->extramask, &set->sig[1],
+ sizeof(frame->extramask));
+ }
+ if (err)
+ goto give_sigsegv;
+
+ /* Set up to return from userspace. If provided, use a stub
+ already in userspace. */
+ if (ka->sa.sa_flags & SA_RESTORER) {
+ return_ip = (unsigned long)ka->sa.sa_restorer;
+ } else {
+ /* trampoline - the desired return ip is the retcode itself */
+ return_ip = (unsigned long)&frame->retcode;
+ /* This is movu.w __NR_sigreturn, r9; break 13; */
+ err |= __put_user(0x9c5f, (short __user*)(frame->retcode+0));
+ err |= __put_user(__NR_sigreturn, (short __user*)(frame->retcode+2));
+ err |= __put_user(0xe93d, (short __user*)(frame->retcode+4));
+ }
+
+ if (err)
+ goto give_sigsegv;
+
+ /* Set up registers for signal handler */
+
+ regs->irp = (unsigned long) ka->sa.sa_handler; /* what we enter NOW */
+ regs->srp = return_ip; /* what we enter LATER */
+ regs->r10 = sig; /* first argument is signo */
+
+ /* actually move the usp to reflect the stacked frame */
+
+ wrusp((unsigned long)frame);
+
+ return;
+
+give_sigsegv:
+ force_sigsegv(sig, current);
+}
+
+static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
+ sigset_t *set, struct pt_regs * regs)
+{
+ struct rt_sigframe __user *frame;
+ unsigned long return_ip;
+ int err = 0;
+
+ frame = get_sigframe(ka, regs, sizeof(*frame));
+
+ if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
+ goto give_sigsegv;
+
+ err |= __put_user(&frame->info, &frame->pinfo);
+ err |= __put_user(&frame->uc, &frame->puc);
+ err |= copy_siginfo_to_user(&frame->info, info);
+ if (err)
+ goto give_sigsegv;
+
+ /* Clear all the bits of the ucontext we don't use. */
+ err |= __clear_user(&frame->uc, offsetof(struct ucontext, uc_mcontext));
+
+ err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, set->sig[0]);
+
+ err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
+
+ if (err)
+ goto give_sigsegv;
+
+ /* Set up to return from userspace. If provided, use a stub
+ already in userspace. */
+ if (ka->sa.sa_flags & SA_RESTORER) {
+ return_ip = (unsigned long)ka->sa.sa_restorer;
+ } else {
+ /* trampoline - the desired return ip is the retcode itself */
+ return_ip = (unsigned long)&frame->retcode;
+ /* This is movu.w __NR_rt_sigreturn, r9; break 13; */
+ err |= __put_user(0x9c5f, (short __user*)(frame->retcode+0));
+ err |= __put_user(__NR_rt_sigreturn, (short __user*)(frame->retcode+2));
+ err |= __put_user(0xe93d, (short __user*)(frame->retcode+4));
+ }
+
+ if (err)
+ goto give_sigsegv;
+
+ /* TODO what is the current->exec_domain stuff and invmap ? */
+
+ /* Set up registers for signal handler */
+
+ regs->irp = (unsigned long) ka->sa.sa_handler; /* what we enter NOW */
+ regs->srp = return_ip; /* what we enter LATER */
+ regs->r10 = sig; /* first argument is signo */
+ regs->r11 = (unsigned long) &frame->info; /* second argument is (siginfo_t *) */
+ regs->r12 = 0; /* third argument is unused */
+
+ /* actually move the usp to reflect the stacked frame */
+
+ wrusp((unsigned long)frame);
+
+ return;
+
+give_sigsegv:
+ force_sigsegv(sig, current);
+}
+
+/*
+ * OK, we're invoking a handler
+ */
+
+extern inline void
+handle_signal(int canrestart, unsigned long sig,
+ siginfo_t *info, struct k_sigaction *ka,
+ sigset_t *oldset, struct pt_regs * regs)
+{
+ /* Are we from a system call? */
+ if (canrestart) {
+ /* If so, check system call restarting.. */
+ switch (regs->r10) {
+ case -ERESTART_RESTARTBLOCK:
+ case -ERESTARTNOHAND:
+ /* ERESTARTNOHAND means that the syscall should only be
+ restarted if there was no handler for the signal, and since
+ we only get here if there is a handler, we don't restart */
+ regs->r10 = -EINTR;
+ break;
+
+ case -ERESTARTSYS:
+ /* ERESTARTSYS means to restart the syscall if there is no
+ handler or the handler was registered with SA_RESTART */
+ if (!(ka->sa.sa_flags & SA_RESTART)) {
+ regs->r10 = -EINTR;
+ break;
+ }
+ /* fallthrough */
+ case -ERESTARTNOINTR:
+ /* ERESTARTNOINTR means that the syscall should be called again
+ after the signal handler returns. */
+ RESTART_CRIS_SYS(regs);
+ }
+ }
+
+ /* Set up the stack frame */
+ if (ka->sa.sa_flags & SA_SIGINFO)
+ setup_rt_frame(sig, ka, info, oldset, regs);
+ else
+ setup_frame(sig, ka, oldset, regs);
+
+ if (ka->sa.sa_flags & SA_ONESHOT)
+ ka->sa.sa_handler = SIG_DFL;
+
+ if (!(ka->sa.sa_flags & SA_NODEFER)) {
+ spin_lock_irq(&current->sighand->siglock);
+ sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
+ sigaddset(&current->blocked,sig);
+ recalc_sigpending();
+ spin_unlock_irq(&current->sighand->siglock);
+ }
+}
+
+/*
+ * Note that 'init' is a special process: it doesn't get signals it doesn't
+ * want to handle. Thus you cannot kill init even with a SIGKILL even by
+ * mistake.
+ *
+ * Also note that the regs structure given here as an argument, is the latest
+ * pushed pt_regs. It may or may not be the same as the first pushed registers
+ * when the initial usermode->kernelmode transition took place. Therefore
+ * we can use user_mode(regs) to see if we came directly from kernel or user
+ * mode below.
+ */
+
+int do_signal(int canrestart, sigset_t *oldset, struct pt_regs *regs)
+{
+ siginfo_t info;
+ int signr;
+ struct k_sigaction ka;
+
+ /*
+ * We want the common case to go fast, which
+ * is why we may in certain cases get here from
+ * kernel mode. Just return without doing anything
+ * if so.
+ */
+ if (!user_mode(regs))
+ return 1;
+
+ if (!oldset)
+ oldset = &current->blocked;
+
+ signr = get_signal_to_deliver(&info, &ka, regs, NULL);
+ if (signr > 0) {
+ /* Whee! Actually deliver the signal. */
+ handle_signal(canrestart, signr, &info, &ka, oldset, regs);
+ return 1;
+ }
+
+ /* Did we come from a system call? */
+ if (canrestart) {
+ /* Restart the system call - no handlers present */
+ if (regs->r10 == -ERESTARTNOHAND ||
+ regs->r10 == -ERESTARTSYS ||
+ regs->r10 == -ERESTARTNOINTR) {
+ RESTART_CRIS_SYS(regs);
+ }
+ if (regs->r10 == -ERESTART_RESTARTBLOCK){
+ regs->r10 = __NR_restart_syscall;
+ regs->irp -= 2;
+ }
+ }
+ return 0;
+}
diff --git a/arch/cris/arch-v10/kernel/time.c b/arch/cris/arch-v10/kernel/time.c
new file mode 100644
index 00000000000..6b7b4e0802e
--- /dev/null
+++ b/arch/cris/arch-v10/kernel/time.c
@@ -0,0 +1,369 @@
+/* $Id: time.c,v 1.5 2004/09/29 06:12:46 starvik Exp $
+ *
+ * linux/arch/cris/arch-v10/kernel/time.c
+ *
+ * Copyright (C) 1991, 1992, 1995 Linus Torvalds
+ * Copyright (C) 1999-2002 Axis Communications AB
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/timex.h>
+#include <linux/time.h>
+#include <linux/jiffies.h>
+#include <linux/interrupt.h>
+#include <linux/swap.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <asm/arch/svinto.h>
+#include <asm/types.h>
+#include <asm/signal.h>
+#include <asm/io.h>
+#include <asm/delay.h>
+#include <asm/rtc.h>
+
+/* define this if you need to use print_timestamp */
+/* it will make jiffies at 96 hz instead of 100 hz though */
+#undef USE_CASCADE_TIMERS
+
+extern void update_xtime_from_cmos(void);
+extern int set_rtc_mmss(unsigned long nowtime);
+extern int setup_irq(int, struct irqaction *);
+extern int have_rtc;
+
+unsigned long get_ns_in_jiffie(void)
+{
+ unsigned char timer_count, t1;
+ unsigned short presc_count;
+ unsigned long ns;
+ unsigned long flags;
+
+ local_irq_save(flags);
+ local_irq_disable();
+ timer_count = *R_TIMER0_DATA;
+ presc_count = *R_TIM_PRESC_STATUS;
+ /* presc_count might be wrapped */
+ t1 = *R_TIMER0_DATA;
+
+ if (timer_count != t1){
+ /* it wrapped, read prescaler again... */
+ presc_count = *R_TIM_PRESC_STATUS;
+ timer_count = t1;
+ }
+ local_irq_restore(flags);
+ if (presc_count >= PRESCALE_VALUE/2 ){
+ presc_count = PRESCALE_VALUE - presc_count + PRESCALE_VALUE/2;
+ } else {
+ presc_count = PRESCALE_VALUE - presc_count - PRESCALE_VALUE/2;
+ }
+
+ ns = ( (TIMER0_DIV - timer_count) * ((1000000000/HZ)/TIMER0_DIV )) +
+ ( (presc_count) * (1000000000/PRESCALE_FREQ));
+ return ns;
+}
+
+unsigned long do_slow_gettimeoffset(void)
+{
+ unsigned long count, t1;
+ unsigned long usec_count = 0;
+ unsigned short presc_count;
+
+ static unsigned long count_p = TIMER0_DIV;/* for the first call after boot */
+ static unsigned long jiffies_p = 0;
+
+ /*
+ * cache volatile jiffies temporarily; we have IRQs turned off.
+ */
+ unsigned long jiffies_t;
+
+ /* The timer interrupt comes from Etrax timer 0. In order to get
+ * better precision, we check the current value. It might have
+ * underflowed already though.
+ */
+
+#ifndef CONFIG_SVINTO_SIM
+ /* Not available in the xsim simulator. */
+ count = *R_TIMER0_DATA;
+ presc_count = *R_TIM_PRESC_STATUS;
+ /* presc_count might be wrapped */
+ t1 = *R_TIMER0_DATA;
+ if (count != t1){
+ /* it wrapped, read prescaler again... */
+ presc_count = *R_TIM_PRESC_STATUS;
+ count = t1;
+ }
+#else
+ count = 0;
+ presc_count = 0;
+#endif
+
+ jiffies_t = jiffies;
+
+ /*
+ * avoiding timer inconsistencies (they are rare, but they happen)...
+ * there are one problem that must be avoided here:
+ * 1. the timer counter underflows
+ */
+ if( jiffies_t == jiffies_p ) {
+ if( count > count_p ) {
+ /* Timer wrapped, use new count and prescale
+ * increase the time corresponding to one jiffie
+ */
+ usec_count = 1000000/HZ;
+ }
+ } else
+ jiffies_p = jiffies_t;
+ count_p = count;
+ if (presc_count >= PRESCALE_VALUE/2 ){
+ presc_count = PRESCALE_VALUE - presc_count + PRESCALE_VALUE/2;
+ } else {
+ presc_count = PRESCALE_VALUE - presc_count - PRESCALE_VALUE/2;
+ }
+ /* Convert timer value to usec */
+ usec_count += ( (TIMER0_DIV - count) * (1000000/HZ)/TIMER0_DIV ) +
+ (( (presc_count) * (1000000000/PRESCALE_FREQ))/1000);
+
+ return usec_count;
+}
+
+/* Excerpt from the Etrax100 HSDD about the built-in watchdog:
+ *
+ * 3.10.4 Watchdog timer
+
+ * When the watchdog timer is started, it generates an NMI if the watchdog
+ * isn't restarted or stopped within 0.1 s. If it still isn't restarted or
+ * stopped after an additional 3.3 ms, the watchdog resets the chip.
+ * The watchdog timer is stopped after reset. The watchdog timer is controlled
+ * by the R_WATCHDOG register. The R_WATCHDOG register contains an enable bit
+ * and a 3-bit key value. The effect of writing to the R_WATCHDOG register is
+ * described in the table below:
+ *
+ * Watchdog Value written:
+ * state: To enable: To key: Operation:
+ * -------- ---------- ------- ----------
+ * stopped 0 X No effect.
+ * stopped 1 key_val Start watchdog with key = key_val.
+ * started 0 ~key Stop watchdog
+ * started 1 ~key Restart watchdog with key = ~key.
+ * started X new_key_val Change key to new_key_val.
+ *
+ * Note: '~' is the bitwise NOT operator.
+ *
+ */
+
+/* right now, starting the watchdog is the same as resetting it */
+#define start_watchdog reset_watchdog
+
+#if defined(CONFIG_ETRAX_WATCHDOG) && !defined(CONFIG_SVINTO_SIM)
+static int watchdog_key = 0; /* arbitrary number */
+#endif
+
+/* number of pages to consider "out of memory". it is normal that the memory
+ * is used though, so put this really low.
+ */
+
+#define WATCHDOG_MIN_FREE_PAGES 8
+
+void
+reset_watchdog(void)
+{
+#if defined(CONFIG_ETRAX_WATCHDOG) && !defined(CONFIG_SVINTO_SIM)
+ /* only keep watchdog happy as long as we have memory left! */
+ if(nr_free_pages() > WATCHDOG_MIN_FREE_PAGES) {
+ /* reset the watchdog with the inverse of the old key */
+ watchdog_key ^= 0x7; /* invert key, which is 3 bits */
+ *R_WATCHDOG = IO_FIELD(R_WATCHDOG, key, watchdog_key) |
+ IO_STATE(R_WATCHDOG, enable, start);
+ }
+#endif
+}
+
+/* stop the watchdog - we still need the correct key */
+
+void
+stop_watchdog(void)
+{
+#if defined(CONFIG_ETRAX_WATCHDOG) && !defined(CONFIG_SVINTO_SIM)
+ watchdog_key ^= 0x7; /* invert key, which is 3 bits */
+ *R_WATCHDOG = IO_FIELD(R_WATCHDOG, key, watchdog_key) |
+ IO_STATE(R_WATCHDOG, enable, stop);
+#endif
+}
+
+/* last time the cmos clock got updated */
+static long last_rtc_update = 0;
+
+/*
+ * timer_interrupt() needs to keep up the real-time clock,
+ * as well as call the "do_timer()" routine every clocktick
+ */
+
+//static unsigned short myjiff; /* used by our debug routine print_timestamp */
+
+extern void cris_do_profile(struct pt_regs *regs);
+
+static inline irqreturn_t
+timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ /* acknowledge the timer irq */
+
+#ifdef USE_CASCADE_TIMERS
+ *R_TIMER_CTRL =
+ IO_FIELD( R_TIMER_CTRL, timerdiv1, 0) |
+ IO_FIELD( R_TIMER_CTRL, timerdiv0, 0) |
+ IO_STATE( R_TIMER_CTRL, i1, clr) |
+ IO_STATE( R_TIMER_CTRL, tm1, run) |
+ IO_STATE( R_TIMER_CTRL, clksel1, cascade0) |
+ IO_STATE( R_TIMER_CTRL, i0, clr) |
+ IO_STATE( R_TIMER_CTRL, tm0, run) |
+ IO_STATE( R_TIMER_CTRL, clksel0, c6250kHz);
+#else
+ *R_TIMER_CTRL = r_timer_ctrl_shadow |
+ IO_STATE(R_TIMER_CTRL, i0, clr);
+#endif
+
+ /* reset watchdog otherwise it resets us! */
+
+ reset_watchdog();
+
+ /* call the real timer interrupt handler */
+
+ do_timer(regs);
+
+ cris_do_profile(regs); /* Save profiling information */
+
+ /*
+ * If we have an externally synchronized Linux clock, then update
+ * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
+ * called as close as possible to 500 ms before the new second starts.
+ *
+ * The division here is not time critical since it will run once in
+ * 11 minutes
+ */
+ if ((time_status & STA_UNSYNC) == 0 &&
+ xtime.tv_sec > last_rtc_update + 660 &&
+ (xtime.tv_nsec / 1000) >= 500000 - (tick_nsec / 1000) / 2 &&
+ (xtime.tv_nsec / 1000) <= 500000 + (tick_nsec / 1000) / 2) {
+ if (set_rtc_mmss(xtime.tv_sec) == 0)
+ last_rtc_update = xtime.tv_sec;
+ else
+ last_rtc_update = xtime.tv_sec - 600; /* do it again in 60 s */
+ }
+ return IRQ_HANDLED;
+}
+
+/* timer is SA_SHIRQ so drivers can add stuff to the timer irq chain
+ * it needs to be SA_INTERRUPT to make the jiffies update work properly
+ */
+
+static struct irqaction irq2 = { timer_interrupt, SA_SHIRQ | SA_INTERRUPT,
+ CPU_MASK_NONE, "timer", NULL, NULL};
+
+void __init
+time_init(void)
+{
+ /* probe for the RTC and read it if it exists
+ * Before the RTC can be probed the loops_per_usec variable needs
+ * to be initialized to make usleep work. A better value for
+ * loops_per_usec is calculated by the kernel later once the
+ * clock has started.
+ */
+ loops_per_usec = 50;
+
+ if(RTC_INIT() < 0) {
+ /* no RTC, start at 1980 */
+ xtime.tv_sec = 0;
+ xtime.tv_nsec = 0;
+ have_rtc = 0;
+ } else {
+ /* get the current time */
+ have_rtc = 1;
+ update_xtime_from_cmos();
+ }
+
+ /*
+ * Initialize wall_to_monotonic such that adding it to xtime will yield zero, the
+ * tv_nsec field must be normalized (i.e., 0 <= nsec < NSEC_PER_SEC).
+ */
+ set_normalized_timespec(&wall_to_monotonic, -xtime.tv_sec, -xtime.tv_nsec);
+
+ /* Setup the etrax timers
+ * Base frequency is 25000 hz, divider 250 -> 100 HZ
+ * In normal mode, we use timer0, so timer1 is free. In cascade
+ * mode (which we sometimes use for debugging) both timers are used.
+ * Remember that linux/timex.h contains #defines that rely on the
+ * timer settings below (hz and divide factor) !!!
+ */
+
+#ifdef USE_CASCADE_TIMERS
+ *R_TIMER_CTRL =
+ IO_FIELD( R_TIMER_CTRL, timerdiv1, 0) |
+ IO_FIELD( R_TIMER_CTRL, timerdiv0, 0) |
+ IO_STATE( R_TIMER_CTRL, i1, nop) |
+ IO_STATE( R_TIMER_CTRL, tm1, stop_ld) |
+ IO_STATE( R_TIMER_CTRL, clksel1, cascade0) |
+ IO_STATE( R_TIMER_CTRL, i0, nop) |
+ IO_STATE( R_TIMER_CTRL, tm0, stop_ld) |
+ IO_STATE( R_TIMER_CTRL, clksel0, c6250kHz);
+
+ *R_TIMER_CTRL = r_timer_ctrl_shadow =
+ IO_FIELD( R_TIMER_CTRL, timerdiv1, 0) |
+ IO_FIELD( R_TIMER_CTRL, timerdiv0, 0) |
+ IO_STATE( R_TIMER_CTRL, i1, nop) |
+ IO_STATE( R_TIMER_CTRL, tm1, run) |
+ IO_STATE( R_TIMER_CTRL, clksel1, cascade0) |
+ IO_STATE( R_TIMER_CTRL, i0, nop) |
+ IO_STATE( R_TIMER_CTRL, tm0, run) |
+ IO_STATE( R_TIMER_CTRL, clksel0, c6250kHz);
+#else
+ *R_TIMER_CTRL =
+ IO_FIELD(R_TIMER_CTRL, timerdiv1, 192) |
+ IO_FIELD(R_TIMER_CTRL, timerdiv0, TIMER0_DIV) |
+ IO_STATE(R_TIMER_CTRL, i1, nop) |
+ IO_STATE(R_TIMER_CTRL, tm1, stop_ld) |
+ IO_STATE(R_TIMER_CTRL, clksel1, c19k2Hz) |
+ IO_STATE(R_TIMER_CTRL, i0, nop) |
+ IO_STATE(R_TIMER_CTRL, tm0, stop_ld) |
+ IO_STATE(R_TIMER_CTRL, clksel0, flexible);
+
+ *R_TIMER_CTRL = r_timer_ctrl_shadow =
+ IO_FIELD(R_TIMER_CTRL, timerdiv1, 192) |
+ IO_FIELD(R_TIMER_CTRL, timerdiv0, TIMER0_DIV) |
+ IO_STATE(R_TIMER_CTRL, i1, nop) |
+ IO_STATE(R_TIMER_CTRL, tm1, run) |
+ IO_STATE(R_TIMER_CTRL, clksel1, c19k2Hz) |
+ IO_STATE(R_TIMER_CTRL, i0, nop) |
+ IO_STATE(R_TIMER_CTRL, tm0, run) |
+ IO_STATE(R_TIMER_CTRL, clksel0, flexible);
+
+ *R_TIMER_PRESCALE = PRESCALE_VALUE;
+#endif
+
+ *R_IRQ_MASK0_SET =
+ IO_STATE(R_IRQ_MASK0_SET, timer0, set); /* unmask the timer irq */
+
+ /* now actually register the timer irq handler that calls timer_interrupt() */
+
+ setup_irq(2, &irq2); /* irq 2 is the timer0 irq in etrax */
+
+ /* enable watchdog if we should use one */
+
+#if defined(CONFIG_ETRAX_WATCHDOG) && !defined(CONFIG_SVINTO_SIM)
+ printk("Enabling watchdog...\n");
+ start_watchdog();
+
+ /* If we use the hardware watchdog, we want to trap it as an NMI
+ and dump registers before it resets us. For this to happen, we
+ must set the "m" NMI enable flag (which once set, is unset only
+ when an NMI is taken).
+
+ The same goes for the external NMI, but that doesn't have any
+ driver or infrastructure support yet. */
+ asm ("setf m");
+
+ *R_IRQ_MASK0_SET =
+ IO_STATE(R_IRQ_MASK0_SET, watchdog_nmi, set);
+ *R_VECT_MASK_SET =
+ IO_STATE(R_VECT_MASK_SET, nmi, set);
+#endif
+}
diff --git a/arch/cris/arch-v10/kernel/traps.c b/arch/cris/arch-v10/kernel/traps.c
new file mode 100644
index 00000000000..da491f438a6
--- /dev/null
+++ b/arch/cris/arch-v10/kernel/traps.c
@@ -0,0 +1,132 @@
+/* $Id: traps.c,v 1.2 2003/07/04 08:27:41 starvik Exp $
+ *
+ * linux/arch/cris/arch-v10/traps.c
+ *
+ * Heler functions for trap handlers
+ *
+ * Copyright (C) 2000-2002 Axis Communications AB
+ *
+ * Authors: Bjorn Wesen
+ * Hans-Peter Nilsson
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/ptrace.h>
+#include <asm/uaccess.h>
+#include <asm/arch/sv_addr_ag.h>
+
+void
+show_registers(struct pt_regs * regs)
+{
+ /* We either use rdusp() - the USP register, which might not
+ correspond to the current process for all cases we're called,
+ or we use the current->thread.usp, which is not up to date for
+ the current process. Experience shows we want the USP
+ register. */
+ unsigned long usp = rdusp();
+
+ printk("IRP: %08lx SRP: %08lx DCCR: %08lx USP: %08lx MOF: %08lx\n",
+ regs->irp, regs->srp, regs->dccr, usp, regs->mof );
+ printk(" r0: %08lx r1: %08lx r2: %08lx r3: %08lx\n",
+ regs->r0, regs->r1, regs->r2, regs->r3);
+ printk(" r4: %08lx r5: %08lx r6: %08lx r7: %08lx\n",
+ regs->r4, regs->r5, regs->r6, regs->r7);
+ printk(" r8: %08lx r9: %08lx r10: %08lx r11: %08lx\n",
+ regs->r8, regs->r9, regs->r10, regs->r11);
+ printk("r12: %08lx r13: %08lx oR10: %08lx\n",
+ regs->r12, regs->r13, regs->orig_r10);
+ printk("R_MMU_CAUSE: %08lx\n", (unsigned long)*R_MMU_CAUSE);
+ printk("Process %s (pid: %d, stackpage=%08lx)\n",
+ current->comm, current->pid, (unsigned long)current);
+
+ /*
+ * When in-kernel, we also print out the stack and code at the
+ * time of the fault..
+ */
+ if (! user_mode(regs)) {
+ int i;
+
+ show_stack(NULL, (unsigned long*)usp);
+
+ /* Dump kernel stack if the previous dump wasn't one. */
+ if (usp != 0)
+ show_stack (NULL, NULL);
+
+ printk("\nCode: ");
+ if(regs->irp < PAGE_OFFSET)
+ goto bad;
+
+ /* Often enough the value at regs->irp does not point to
+ the interesting instruction, which is most often the
+ _previous_ instruction. So we dump at an offset large
+ enough that instruction decoding should be in sync at
+ the interesting point, but small enough to fit on a row
+ (sort of). We point out the regs->irp location in a
+ ksymoops-friendly way by wrapping the byte for that
+ address in parentheses. */
+ for(i = -12; i < 12; i++)
+ {
+ unsigned char c;
+ if(__get_user(c, &((unsigned char*)regs->irp)[i])) {
+bad:
+ printk(" Bad IP value.");
+ break;
+ }
+
+ if (i == 0)
+ printk("(%02x) ", c);
+ else
+ printk("%02x ", c);
+ }
+ printk("\n");
+ }
+}
+
+/* Called from entry.S when the watchdog has bitten
+ * We print out something resembling an oops dump, and if
+ * we have the nice doggy development flag set, we halt here
+ * instead of rebooting.
+ */
+
+extern void reset_watchdog(void);
+extern void stop_watchdog(void);
+
+
+void
+watchdog_bite_hook(struct pt_regs *regs)
+{
+#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY
+ local_irq_disable();
+ stop_watchdog();
+ show_registers(regs);
+ while(1) /* nothing */;
+#else
+ show_registers(regs);
+#endif
+}
+
+/* This is normally the 'Oops' routine */
+void
+die_if_kernel(const char * str, struct pt_regs * regs, long err)
+{
+ if(user_mode(regs))
+ return;
+
+#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY
+ /* This printout might take too long and trigger the
+ * watchdog normally. If we're in the nice doggy
+ * development mode, stop the watchdog during printout.
+ */
+ stop_watchdog();
+#endif
+
+ printk("%s: %04lx\n", str, err & 0xffff);
+
+ show_registers(regs);
+
+#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY
+ reset_watchdog();
+#endif
+ do_exit(SIGSEGV);
+}
diff --git a/arch/cris/arch-v10/lib/Makefile b/arch/cris/arch-v10/lib/Makefile
new file mode 100644
index 00000000000..36e9a9c5239
--- /dev/null
+++ b/arch/cris/arch-v10/lib/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for Etrax-specific library files..
+#
+
+
+EXTRA_AFLAGS := -traditional
+
+lib-y = checksum.o checksumcopy.o string.o usercopy.o memset.o csumcpfruser.o
+
diff --git a/arch/cris/arch-v10/lib/checksum.S b/arch/cris/arch-v10/lib/checksum.S
new file mode 100644
index 00000000000..85c48f0a9ec
--- /dev/null
+++ b/arch/cris/arch-v10/lib/checksum.S
@@ -0,0 +1,124 @@
+/* $Id: checksum.S,v 1.1 2001/12/17 13:59:27 bjornw Exp $
+ * A fast checksum routine using movem
+ * Copyright (c) 1998-2001 Axis Communications AB
+ *
+ * csum_partial(const unsigned char * buff, int len, unsigned int sum)
+ */
+
+ .globl csum_partial
+csum_partial:
+
+ ;; r10 - src
+ ;; r11 - length
+ ;; r12 - checksum
+
+ ;; check for breakeven length between movem and normal word looping versions
+ ;; we also do _NOT_ want to compute a checksum over more than the
+ ;; actual length when length < 40
+
+ cmpu.w 80,$r11
+ blo _word_loop
+ nop
+
+ ;; need to save the registers we use below in the movem loop
+ ;; this overhead is why we have a check above for breakeven length
+ ;; only r0 - r8 have to be saved, the other ones are clobber-able
+ ;; according to the ABI
+
+ subq 9*4,$sp
+ movem $r8,[$sp]
+
+ ;; do a movem checksum
+
+ subq 10*4,$r11 ; update length for the first loop
+
+_mloop: movem [$r10+],$r9 ; read 10 longwords
+
+ ;; perform dword checksumming on the 10 longwords
+
+ add.d $r0,$r12
+ ax
+ add.d $r1,$r12
+ ax
+ add.d $r2,$r12
+ ax
+ add.d $r3,$r12
+ ax
+ add.d $r4,$r12
+ ax
+ add.d $r5,$r12
+ ax
+ add.d $r6,$r12
+ ax
+ add.d $r7,$r12
+ ax
+ add.d $r8,$r12
+ ax
+ add.d $r9,$r12
+
+ ;; fold the carry into the checksum, to avoid having to loop the carry
+ ;; back into the top
+
+ ax
+ addq 0,$r12
+ ax ; do it again, since we might have generated a carry
+ addq 0,$r12
+
+ subq 10*4,$r11
+ bge _mloop
+ nop
+
+ addq 10*4,$r11 ; compensate for last loop underflowing length
+
+ movem [$sp+],$r8 ; restore regs
+
+_word_loop:
+ ;; only fold if there is anything to fold.
+
+ cmpq 0,$r12
+ beq _no_fold
+
+ ;; fold 32-bit checksum into a 16-bit checksum, to avoid carries below.
+ ;; r9 and r13 can be used as temporaries.
+
+ moveq -1,$r9 ; put 0xffff in r9, faster than move.d 0xffff,r9
+ lsrq 16,$r9
+
+ move.d $r12,$r13
+ lsrq 16,$r13 ; r13 = checksum >> 16
+ and.d $r9,$r12 ; checksum = checksum & 0xffff
+ add.d $r13,$r12 ; checksum += r13
+ move.d $r12,$r13 ; do the same again, maybe we got a carry last add
+ lsrq 16,$r13
+ and.d $r9,$r12
+ add.d $r13,$r12
+
+_no_fold:
+ cmpq 2,$r11
+ blt _no_words
+ nop
+
+ ;; checksum the rest of the words
+
+ subq 2,$r11
+
+_wloop: subq 2,$r11
+ bge _wloop
+ addu.w [$r10+],$r12
+
+ addq 2,$r11
+
+_no_words:
+ ;; see if we have one odd byte more
+ cmpq 1,$r11
+ beq _do_byte
+ nop
+ ret
+ move.d $r12, $r10
+
+_do_byte:
+ ;; copy and checksum the last byte
+ addu.b [$r10],$r12
+ ret
+ move.d $r12, $r10
+
diff --git a/arch/cris/arch-v10/lib/checksumcopy.S b/arch/cris/arch-v10/lib/checksumcopy.S
new file mode 100644
index 00000000000..35cbffb306f
--- /dev/null
+++ b/arch/cris/arch-v10/lib/checksumcopy.S
@@ -0,0 +1,132 @@
+/* $Id: checksumcopy.S,v 1.1 2001/12/17 13:59:27 bjornw Exp $
+ * A fast checksum+copy routine using movem
+ * Copyright (c) 1998, 2001 Axis Communications AB
+ *
+ * Authors: Bjorn Wesen
+ *
+ * csum_partial_copy_nocheck(const char *src, char *dst,
+ * int len, unsigned int sum)
+ */
+
+ .globl csum_partial_copy_nocheck
+csum_partial_copy_nocheck:
+
+ ;; r10 - src
+ ;; r11 - dst
+ ;; r12 - length
+ ;; r13 - checksum
+
+ ;; check for breakeven length between movem and normal word looping versions
+ ;; we also do _NOT_ want to compute a checksum over more than the
+ ;; actual length when length < 40
+
+ cmpu.w 80, $r12
+ blo _word_loop
+ nop
+
+ ;; need to save the registers we use below in the movem loop
+ ;; this overhead is why we have a check above for breakeven length
+ ;; only r0 - r8 have to be saved, the other ones are clobber-able
+ ;; according to the ABI
+
+ subq 9*4, $sp
+ movem $r8, [$sp]
+
+ ;; do a movem copy and checksum
+
+ subq 10*4, $r12 ; update length for the first loop
+
+_mloop: movem [$r10+],$r9 ; read 10 longwords
+1: ;; A failing userspace access will have this as PC.
+ movem $r9,[$r11+] ; write 10 longwords
+
+ ;; perform dword checksumming on the 10 longwords
+
+ add.d $r0,$r13
+ ax
+ add.d $r1,$r13
+ ax
+ add.d $r2,$r13
+ ax
+ add.d $r3,$r13
+ ax
+ add.d $r4,$r13
+ ax
+ add.d $r5,$r13
+ ax
+ add.d $r6,$r13
+ ax
+ add.d $r7,$r13
+ ax
+ add.d $r8,$r13
+ ax
+ add.d $r9,$r13
+
+ ;; fold the carry into the checksum, to avoid having to loop the carry
+ ;; back into the top
+
+ ax
+ addq 0,$r13
+ ax ; do it again, since we might have generated a carry
+ addq 0,$r13
+
+ subq 10*4,$r12
+ bge _mloop
+ nop
+
+ addq 10*4,$r12 ; compensate for last loop underflowing length
+
+ movem [$sp+],$r8 ; restore regs
+
+_word_loop:
+ ;; only fold if there is anything to fold.
+
+ cmpq 0,$r13
+ beq _no_fold
+
+ ;; fold 32-bit checksum into a 16-bit checksum, to avoid carries below
+ ;; r9 can be used as temporary.
+
+ move.d $r13,$r9
+ lsrq 16,$r9 ; r0 = checksum >> 16
+ and.d 0xffff,$r13 ; checksum = checksum & 0xffff
+ add.d $r9,$r13 ; checksum += r0
+ move.d $r13,$r9 ; do the same again, maybe we got a carry last add
+ lsrq 16,$r9
+ and.d 0xffff,$r13
+ add.d $r9,$r13
+
+_no_fold:
+ cmpq 2,$r12
+ blt _no_words
+ nop
+
+ ;; copy and checksum the rest of the words
+
+ subq 2,$r12
+
+_wloop: move.w [$r10+],$r9
+2: ;; A failing userspace access will have this as PC.
+ addu.w $r9,$r13
+ subq 2,$r12
+ bge _wloop
+ move.w $r9,[$r11+]
+
+ addq 2,$r12
+
+_no_words:
+ ;; see if we have one odd byte more
+ cmpq 1,$r12
+ beq _do_byte
+ nop
+ ret
+ move.d $r13, $r10
+
+_do_byte:
+ ;; copy and checksum the last byte
+ move.b [$r10],$r9
+3: ;; A failing userspace access will have this as PC.
+ addu.b $r9,$r13
+ move.b $r9,[$r11]
+ ret
+ move.d $r13, $r10
diff --git a/arch/cris/arch-v10/lib/csumcpfruser.S b/arch/cris/arch-v10/lib/csumcpfruser.S
new file mode 100644
index 00000000000..5f41ccd6275
--- /dev/null
+++ b/arch/cris/arch-v10/lib/csumcpfruser.S
@@ -0,0 +1,64 @@
+/*
+ * Add-on to transform csum_partial_copy_nocheck in checksumcopy.S into
+ * csum_partial_copy_from_user by adding exception records.
+ *
+ * Copyright (C) 2001 Axis Communications AB.
+ *
+ * Author: Hans-Peter Nilsson.
+ */
+
+#include <asm/errno.h>
+
+/* Same function body, but a different name. If we just added exception
+ records to _csum_partial_copy_nocheck and made it generic, we wouldn't
+ know a user fault from a kernel fault and we would have overhead in
+ each kernel caller for the error-pointer argument.
+
+ unsigned int csum_partial_copy_from_user
+ (const char *src, char *dst, int len, unsigned int sum, int *errptr);
+
+ Note that the errptr argument is only set if we encounter an error.
+ It is conveniently located on the stack, so the normal function body
+ does not have to handle it. */
+
+#define csum_partial_copy_nocheck csum_partial_copy_from_user
+
+/* There are local labels numbered 1, 2 and 3 present to mark the
+ different from-user accesses. */
+#include "checksumcopy.S"
+
+ .section .fixup,"ax"
+
+;; Here from the movem loop; restore stack.
+4:
+ movem [$sp+],$r8
+;; r12 is already decremented. Add back chunk_size-2.
+ addq 40-2,$r12
+
+;; Here from the word loop; r12 is off by 2; add it back.
+5:
+ addq 2,$r12
+
+;; Here from a failing single byte.
+6:
+
+;; Signal in *errptr that we had a failing access.
+ moveq -EFAULT,$r9
+ move.d $r9,[[$sp]]
+
+;; Clear the rest of the destination area using memset. Preserve the
+;; checksum for the readable bytes.
+ push $srp
+ push $r13
+ move.d $r11,$r10
+ clear.d $r11
+ jsr memset
+ pop $r10
+ jump [$sp+]
+
+ .previous
+ .section __ex_table,"a"
+ .dword 1b,4b
+ .dword 2b,5b
+ .dword 3b,6b
+ .previous
diff --git a/arch/cris/arch-v10/lib/dmacopy.c b/arch/cris/arch-v10/lib/dmacopy.c
new file mode 100644
index 00000000000..e5fb44f505c
--- /dev/null
+++ b/arch/cris/arch-v10/lib/dmacopy.c
@@ -0,0 +1,43 @@
+/* $Id: dmacopy.c,v 1.1 2001/12/17 13:59:27 bjornw Exp $
+ *
+ * memcpy for large blocks, using memory-memory DMA channels 6 and 7 in Etrax
+ */
+
+#include <asm/svinto.h>
+#include <asm/io.h>
+
+#define D(x)
+
+void *dma_memcpy(void *pdst,
+ const void *psrc,
+ unsigned int pn)
+{
+ static etrax_dma_descr indma, outdma;
+
+ D(printk("dma_memcpy %d bytes... ", pn));
+
+#if 0
+ *R_GEN_CONFIG = genconfig_shadow =
+ (genconfig_shadow & ~0x3c0000) |
+ IO_STATE(R_GEN_CONFIG, dma6, intdma7) |
+ IO_STATE(R_GEN_CONFIG, dma7, intdma6);
+#endif
+ indma.sw_len = outdma.sw_len = pn;
+ indma.ctrl = d_eol | d_eop;
+ outdma.ctrl = d_eol;
+ indma.buf = psrc;
+ outdma.buf = pdst;
+
+ *R_DMA_CH6_FIRST = &indma;
+ *R_DMA_CH7_FIRST = &outdma;
+ *R_DMA_CH6_CMD = IO_STATE(R_DMA_CH6_CMD, cmd, start);
+ *R_DMA_CH7_CMD = IO_STATE(R_DMA_CH7_CMD, cmd, start);
+
+ while(*R_DMA_CH7_CMD == 1) /* wait for completion */ ;
+
+ D(printk("done\n"));
+
+}
+
+
+
diff --git a/arch/cris/arch-v10/lib/dram_init.S b/arch/cris/arch-v10/lib/dram_init.S
new file mode 100644
index 00000000000..2ef4ad5706e
--- /dev/null
+++ b/arch/cris/arch-v10/lib/dram_init.S
@@ -0,0 +1,205 @@
+/* $Id: dram_init.S,v 1.4 2003/09/22 09:21:59 starvik Exp $
+ *
+ * DRAM/SDRAM initialization - alter with care
+ * This file is intended to be included from other assembler files
+ *
+ * Note: This file may not modify r9 because r9 is used to carry
+ * information from the decompresser to the kernel
+ *
+ * Copyright (C) 2000, 2001 Axis Communications AB
+ *
+ * Authors: Mikael Starvik (starvik@axis.com)
+ *
+ * $Log: dram_init.S,v $
+ * Revision 1.4 2003/09/22 09:21:59 starvik
+ * Decompresser is linked to 0x407xxxxx and sdram commands are at 0x000xxxxx
+ * so we need to mask off 12 bits.
+ *
+ * Revision 1.3 2003/03/31 09:38:37 starvik
+ * Corrected calculation of end of sdram init commands
+ *
+ * Revision 1.2 2002/11/19 13:33:29 starvik
+ * Changes from Linux 2.4
+ *
+ * Revision 1.13 2002/10/30 07:42:28 starvik
+ * Always read SDRAM command sequence from flash
+ *
+ * Revision 1.12 2002/08/09 11:37:37 orjanf
+ * Added double initialization work-around for Samsung SDRAMs.
+ *
+ * Revision 1.11 2002/06/04 11:43:21 starvik
+ * Check if mrs_data is specified in kernelconfig (necessary for MCM)
+ *
+ * Revision 1.10 2001/10/04 12:00:21 martinnn
+ * Added missing underscores.
+ *
+ * Revision 1.9 2001/10/01 14:47:35 bjornw
+ * Added register prefixes and removed underscores
+ *
+ * Revision 1.8 2001/05/15 07:12:45 hp
+ * Copy warning from head.S about r8 and r9
+ *
+ * Revision 1.7 2001/04/18 12:05:39 bjornw
+ * Fixed comments, and explicitely include config.h to be sure its there
+ *
+ * Revision 1.6 2001/04/10 06:20:16 starvik
+ * Delay should be 200us, not 200ns
+ *
+ * Revision 1.5 2001/04/09 06:01:13 starvik
+ * Added support for 100 MHz SDRAMs
+ *
+ * Revision 1.4 2001/03/26 14:24:01 bjornw
+ * Namechange of some config options
+ *
+ * Revision 1.3 2001/03/23 08:29:41 starvik
+ * Corrected calculation of mrs_data
+ *
+ * Revision 1.2 2001/02/08 15:20:00 starvik
+ * Corrected SDRAM initialization
+ * Should now be included as inline
+ *
+ * Revision 1.1 2001/01/29 13:08:02 starvik
+ * Initial version
+ * This file should be included from all assembler files that needs to
+ * initialize DRAM/SDRAM.
+ *
+ */
+
+/* Just to be certain the config file is included, we include it here
+ * explicitely instead of depending on it being included in the file that
+ * uses this code.
+ */
+
+#include <linux/config.h>
+
+ ;; WARNING! The registers r8 and r9 are used as parameters carrying
+ ;; information from the decompressor (if the kernel was compressed).
+ ;; They should not be used in the code below.
+
+#ifndef CONFIG_SVINTO_SIM
+ move.d CONFIG_ETRAX_DEF_R_WAITSTATES, $r0
+ move.d $r0, [R_WAITSTATES]
+
+ move.d CONFIG_ETRAX_DEF_R_BUS_CONFIG, $r0
+ move.d $r0, [R_BUS_CONFIG]
+
+#ifndef CONFIG_ETRAX_SDRAM
+ move.d CONFIG_ETRAX_DEF_R_DRAM_CONFIG, $r0
+ move.d $r0, [R_DRAM_CONFIG]
+
+ move.d CONFIG_ETRAX_DEF_R_DRAM_TIMING, $r0
+ move.d $r0, [R_DRAM_TIMING]
+#else
+ ;; Samsung SDRAMs seem to require to be initialized twice to work properly.
+ moveq 2, $r6
+_sdram_init:
+
+ ; Refer to ETRAX 100LX Designers Reference for a description of SDRAM initialization
+
+ ; Bank configuration
+ move.d CONFIG_ETRAX_DEF_R_SDRAM_CONFIG, $r0
+ move.d $r0, [R_SDRAM_CONFIG]
+
+ ; Calculate value of mrs_data
+ ; CAS latency = 2 && bus_width = 32 => 0x40
+ ; CAS latency = 3 && bus_width = 32 => 0x60
+ ; CAS latency = 2 && bus_width = 16 => 0x20
+ ; CAS latency = 3 && bus_width = 16 => 0x30
+
+ ; Check if value is already supplied in kernel config
+ move.d CONFIG_ETRAX_DEF_R_SDRAM_TIMING, $r2
+ and.d 0x00ff0000, $r2
+ bne _set_timing
+ lsrq 16, $r2
+
+ move.d 0x40, $r2 ; Assume 32 bits and CAS latency = 2
+ move.d CONFIG_ETRAX_DEF_R_SDRAM_TIMING, $r1
+ move.d $r1, $r3
+ and.d 0x03, $r1 ; Get CAS latency
+ and.d 0x1000, $r3 ; 50 or 100 MHz?
+ beq _speed_50
+ nop
+_speed_100:
+ cmp.d 0x00, $r1 ; CAS latency = 2?
+ beq _bw_check
+ nop
+ or.d 0x20, $r2 ; CAS latency = 3
+ ba _bw_check
+ nop
+_speed_50:
+ cmp.d 0x01, $r1 ; CAS latency = 2?
+ beq _bw_check
+ nop
+ or.d 0x20, $r2 ; CAS latency = 3
+_bw_check:
+ move.d CONFIG_ETRAX_DEF_R_SDRAM_CONFIG, $r1
+ and.d 0x800000, $r1 ; DRAM width is bit 23
+ bne _set_timing
+ nop
+ lsrq 1, $r2 ; 16 bits. Shift down value.
+
+ ; Set timing parameters. Starts master clock
+_set_timing:
+ move.d CONFIG_ETRAX_DEF_R_SDRAM_TIMING, $r1
+ and.d 0x8000f9ff, $r1 ; Make sure mrs data and command is 0
+ or.d 0x80000000, $r1 ; Make sure sdram enable bit is set
+ move.d $r1, $r5
+ or.d 0x0000c000, $r1 ; ref = disable
+ lslq 16, $r2 ; mrs data starts at bit 16
+ or.d $r2, $r1
+ move.d $r1, [R_SDRAM_TIMING]
+
+ ; Wait 200us
+ move.d 10000, $r2
+1: bne 1b
+ subq 1, $r2
+
+ ; Issue initialization command sequence
+ move.d _sdram_commands_start, $r2
+ and.d 0x000fffff, $r2 ; Make sure commands are read from flash
+ move.d _sdram_commands_end, $r3
+ and.d 0x000fffff, $r3
+1: clear.d $r4
+ move.b [$r2+], $r4
+ lslq 9, $r4 ; Command starts at bit 9
+ or.d $r1, $r4
+ move.d $r4, [R_SDRAM_TIMING]
+ nop ; Wait five nop cycles between each command
+ nop
+ nop
+ nop
+ nop
+ cmp.d $r2, $r3
+ bne 1b
+ nop
+ move.d $r5, [R_SDRAM_TIMING]
+ subq 1, $r6
+ bne _sdram_init
+ nop
+ ba _sdram_commands_end
+ nop
+
+_sdram_commands_start:
+ .byte 3 ; Precharge
+ .byte 0 ; nop
+ .byte 2 ; refresh
+ .byte 0 ; nop
+ .byte 2 ; refresh
+ .byte 0 ; nop
+ .byte 2 ; refresh
+ .byte 0 ; nop
+ .byte 2 ; refresh
+ .byte 0 ; nop
+ .byte 2 ; refresh
+ .byte 0 ; nop
+ .byte 2 ; refresh
+ .byte 0 ; nop
+ .byte 2 ; refresh
+ .byte 0 ; nop
+ .byte 2 ; refresh
+ .byte 0 ; nop
+ .byte 1 ; mrs
+ .byte 0 ; nop
+_sdram_commands_end:
+#endif
+#endif
diff --git a/arch/cris/arch-v10/lib/hw_settings.S b/arch/cris/arch-v10/lib/hw_settings.S
new file mode 100644
index 00000000000..56905aaa7b6
--- /dev/null
+++ b/arch/cris/arch-v10/lib/hw_settings.S
@@ -0,0 +1,62 @@
+/*
+ * $Id: hw_settings.S,v 1.1 2001/12/17 13:59:27 bjornw Exp $
+ *
+ * This table is used by some tools to extract hardware parameters.
+ * The table should be included in the kernel and the decompressor.
+ * Don't forget to update the tools if you change this table.
+ *
+ * Copyright (C) 2001 Axis Communications AB
+ *
+ * Authors: Mikael Starvik (starvik@axis.com)
+ */
+
+#define PA_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PA_DIR << 8) | \
+ (CONFIG_ETRAX_DEF_R_PORT_PA_DATA))
+#define PB_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG << 16) | \
+ (CONFIG_ETRAX_DEF_R_PORT_PB_DIR << 8) | \
+ (CONFIG_ETRAX_DEF_R_PORT_PB_DATA))
+
+ .ascii "HW_PARAM_MAGIC" ; Magic number
+ .dword 0xc0004000 ; Kernel start address
+
+ ; Debug port
+#ifdef CONFIG_ETRAX_DEBUG_PORT0
+ .dword 0
+#elif defined(CONFIG_ETRAX_DEBUG_PORT1)
+ .dword 1
+#elif defined(CONFIG_ETRAX_DEBUG_PORT2)
+ .dword 2
+#elif defined(CONFIG_ETRAX_DEBUG_PORT3)
+ .dword 3
+#else
+ .dword 4 ; No debug
+#endif
+
+ ; SDRAM or EDO DRAM?
+#ifdef CONFIG_ETRAX_SDRAM
+ .dword 1
+#else
+ .dword 0
+#endif
+
+ ; Register values
+ .dword R_WAITSTATES
+ .dword CONFIG_ETRAX_DEF_R_WAITSTATES
+ .dword R_BUS_CONFIG
+ .dword CONFIG_ETRAX_DEF_R_BUS_CONFIG
+#ifdef CONFIG_ETRAX_SDRAM
+ .dword R_SDRAM_CONFIG
+ .dword CONFIG_ETRAX_DEF_R_SDRAM_CONFIG
+ .dword R_SDRAM_TIMING
+ .dword CONFIG_ETRAX_DEF_R_SDRAM_TIMING
+#else
+ .dword R_DRAM_CONFIG
+ .dword CONFIG_ETRAX_DEF_R_DRAM_CONFIG
+ .dword R_DRAM_TIMING
+ .dword CONFIG_ETRAX_DEF_R_DRAM_TIMING
+#endif
+ .dword R_PORT_PA_SET
+ .dword PA_SET_VALUE
+ .dword R_PORT_PB_SET
+ .dword PB_SET_VALUE
+ .dword 0 ; No more register values
diff --git a/arch/cris/arch-v10/lib/memset.c b/arch/cris/arch-v10/lib/memset.c
new file mode 100644
index 00000000000..82bb6683917
--- /dev/null
+++ b/arch/cris/arch-v10/lib/memset.c
@@ -0,0 +1,252 @@
+/*#************************************************************************#*/
+/*#-------------------------------------------------------------------------*/
+/*# */
+/*# FUNCTION NAME: memset() */
+/*# */
+/*# PARAMETERS: void* dst; Destination address. */
+/*# int c; Value of byte to write. */
+/*# int len; Number of bytes to write. */
+/*# */
+/*# RETURNS: dst. */
+/*# */
+/*# DESCRIPTION: Sets the memory dst of length len bytes to c, as standard. */
+/*# Framework taken from memcpy. This routine is */
+/*# very sensitive to compiler changes in register allocation. */
+/*# Should really be rewritten to avoid this problem. */
+/*# */
+/*#-------------------------------------------------------------------------*/
+/*# */
+/*# HISTORY */
+/*# */
+/*# DATE NAME CHANGES */
+/*# ---- ---- ------- */
+/*# 990713 HP Tired of watching this function (or */
+/*# really, the nonoptimized generic */
+/*# implementation) take up 90% of simulator */
+/*# output. Measurements needed. */
+/*# */
+/*#-------------------------------------------------------------------------*/
+
+#include <linux/types.h>
+
+/* No, there's no macro saying 12*4, since it is "hard" to get it into
+ the asm in a good way. Thus better to expose the problem everywhere.
+ */
+
+/* Assuming 1 cycle per dword written or read (ok, not really true), and
+ one per instruction, then 43+3*(n/48-1) <= 24+24*(n/48-1)
+ so n >= 45.7; n >= 0.9; we win on the first full 48-byte block to set. */
+
+#define ZERO_BLOCK_SIZE (1*12*4)
+
+void *memset(void *pdst,
+ int c,
+ size_t plen)
+{
+ /* Ok. Now we want the parameters put in special registers.
+ Make sure the compiler is able to make something useful of this. */
+
+ register char *return_dst __asm__ ("r10") = pdst;
+ register int n __asm__ ("r12") = plen;
+ register int lc __asm__ ("r11") = c;
+
+ /* Most apps use memset sanely. Only those memsetting about 3..4
+ bytes or less get penalized compared to the generic implementation
+ - and that's not really sane use. */
+
+ /* Ugh. This is fragile at best. Check with newer GCC releases, if
+ they compile cascaded "x |= x << 8" sanely! */
+ __asm__("movu.b %0,$r13\n\t"
+ "lslq 8,$r13\n\t"
+ "move.b %0,$r13\n\t"
+ "move.d $r13,%0\n\t"
+ "lslq 16,$r13\n\t"
+ "or.d $r13,%0"
+ : "=r" (lc) : "0" (lc) : "r13");
+
+ {
+ register char *dst __asm__ ("r13") = pdst;
+
+ /* This is NONPORTABLE, but since this whole routine is */
+ /* grossly nonportable that doesn't matter. */
+
+ if (((unsigned long) pdst & 3) != 0
+ /* Oops! n=0 must be a legal call, regardless of alignment. */
+ && n >= 3)
+ {
+ if ((unsigned long)dst & 1)
+ {
+ *dst = (char) lc;
+ n--;
+ dst++;
+ }
+
+ if ((unsigned long)dst & 2)
+ {
+ *(short *)dst = lc;
+ n -= 2;
+ dst += 2;
+ }
+ }
+
+ /* Now the fun part. For the threshold value of this, check the equation
+ above. */
+ /* Decide which copying method to use. */
+ if (n >= ZERO_BLOCK_SIZE)
+ {
+ /* For large copies we use 'movem' */
+
+ /* It is not optimal to tell the compiler about clobbering any
+ registers; that will move the saving/restoring of those registers
+ to the function prologue/epilogue, and make non-movem sizes
+ suboptimal.
+
+ This method is not foolproof; it assumes that the "asm reg"
+ declarations at the beginning of the function really are used
+ here (beware: they may be moved to temporary registers).
+ This way, we do not have to save/move the registers around into
+ temporaries; we can safely use them straight away.
+
+ If you want to check that the allocation was right; then
+ check the equalities in the first comment. It should say
+ "r13=r13, r12=r12, r11=r11" */
+ __asm__ volatile ("
+ ;; Check that the following is true (same register names on
+ ;; both sides of equal sign, as in r8=r8):
+ ;; %0=r13, %1=r12, %4=r11
+ ;;
+ ;; Save the registers we'll clobber in the movem process
+ ;; on the stack. Don't mention them to gcc, it will only be
+ ;; upset.
+ subq 11*4,$sp
+ movem $r10,[$sp]
+
+ move.d $r11,$r0
+ move.d $r11,$r1
+ move.d $r11,$r2
+ move.d $r11,$r3
+ move.d $r11,$r4
+ move.d $r11,$r5
+ move.d $r11,$r6
+ move.d $r11,$r7
+ move.d $r11,$r8
+ move.d $r11,$r9
+ move.d $r11,$r10
+
+ ;; Now we've got this:
+ ;; r13 - dst
+ ;; r12 - n
+
+ ;; Update n for the first loop
+ subq 12*4,$r12
+0:
+ subq 12*4,$r12
+ bge 0b
+ movem $r11,[$r13+]
+
+ addq 12*4,$r12 ;; compensate for last loop underflowing n
+
+ ;; Restore registers from stack
+ movem [$sp+],$r10"
+
+ /* Outputs */ : "=r" (dst), "=r" (n)
+ /* Inputs */ : "0" (dst), "1" (n), "r" (lc));
+
+ }
+
+ /* Either we directly starts copying, using dword copying
+ in a loop, or we copy as much as possible with 'movem'
+ and then the last block (<44 bytes) is copied here.
+ This will work since 'movem' will have updated src,dst,n. */
+
+ while ( n >= 16 )
+ {
+ *((long*)dst)++ = lc;
+ *((long*)dst)++ = lc;
+ *((long*)dst)++ = lc;
+ *((long*)dst)++ = lc;
+ n -= 16;
+ }
+
+ /* A switch() is definitely the fastest although it takes a LOT of code.
+ * Particularly if you inline code this.
+ */
+ switch (n)
+ {
+ case 0:
+ break;
+ case 1:
+ *(char*)dst = (char) lc;
+ break;
+ case 2:
+ *(short*)dst = (short) lc;
+ break;
+ case 3:
+ *((short*)dst)++ = (short) lc;
+ *(char*)dst = (char) lc;
+ break;
+ case 4:
+ *((long*)dst)++ = lc;
+ break;
+ case 5:
+ *((long*)dst)++ = lc;
+ *(char*)dst = (char) lc;
+ break;
+ case 6:
+ *((long*)dst)++ = lc;
+ *(short*)dst = (short) lc;
+ break;
+ case 7:
+ *((long*)dst)++ = lc;
+ *((short*)dst)++ = (short) lc;
+ *(char*)dst = (char) lc;
+ break;
+ case 8:
+ *((long*)dst)++ = lc;
+ *((long*)dst)++ = lc;
+ break;
+ case 9:
+ *((long*)dst)++ = lc;
+ *((long*)dst)++ = lc;
+ *(char*)dst = (char) lc;
+ break;
+ case 10:
+ *((long*)dst)++ = lc;
+ *((long*)dst)++ = lc;
+ *(short*)dst = (short) lc;
+ break;
+ case 11:
+ *((long*)dst)++ = lc;
+ *((long*)dst)++ = lc;
+ *((short*)dst)++ = (short) lc;
+ *(char*)dst = (char) lc;
+ break;
+ case 12:
+ *((long*)dst)++ = lc;
+ *((long*)dst)++ = lc;
+ *((long*)dst)++ = lc;
+ break;
+ case 13:
+ *((long*)dst)++ = lc;
+ *((long*)dst)++ = lc;
+ *((long*)dst)++ = lc;
+ *(char*)dst = (char) lc;
+ break;
+ case 14:
+ *((long*)dst)++ = lc;
+ *((long*)dst)++ = lc;
+ *((long*)dst)++ = lc;
+ *(short*)dst = (short) lc;
+ break;
+ case 15:
+ *((long*)dst)++ = lc;
+ *((long*)dst)++ = lc;
+ *((long*)dst)++ = lc;
+ *((short*)dst)++ = (short) lc;
+ *(char*)dst = (char) lc;
+ break;
+ }
+ }
+
+ return return_dst; /* destination pointer. */
+} /* memset() */
diff --git a/arch/cris/arch-v10/lib/old_checksum.c b/arch/cris/arch-v10/lib/old_checksum.c
new file mode 100644
index 00000000000..22a6f0aa9ce
--- /dev/null
+++ b/arch/cris/arch-v10/lib/old_checksum.c
@@ -0,0 +1,85 @@
+/* $Id: old_checksum.c,v 1.3 2003/10/27 08:04:32 starvik Exp $
+ *
+ * INET An implementation of the TCP/IP protocol suite for the LINUX
+ * operating system. INET is implemented using the BSD Socket
+ * interface as the means of communication with the user level.
+ *
+ * IP/TCP/UDP checksumming routines
+ *
+ * Authors: Jorge Cwik, <jorge@laser.satlink.net>
+ * Arnt Gulbrandsen, <agulbra@nvg.unit.no>
+ * Tom May, <ftom@netcom.com>
+ * Lots of code moved from tcp.c and ip.c; see those files
+ * for more names.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <net/checksum.h>
+#include <net/module.h>
+
+#undef PROFILE_CHECKSUM
+
+#ifdef PROFILE_CHECKSUM
+/* these are just for profiling the checksum code with an oscillioscope.. uh */
+#if 0
+#define BITOFF *((unsigned char *)0xb0000030) = 0xff
+#define BITON *((unsigned char *)0xb0000030) = 0x0
+#endif
+#include <asm/io.h>
+#define CBITON LED_ACTIVE_SET(1)
+#define CBITOFF LED_ACTIVE_SET(0)
+#define BITOFF
+#define BITON
+#else
+#define BITOFF
+#define BITON
+#define CBITOFF
+#define CBITON
+#endif
+
+/*
+ * computes a partial checksum, e.g. for TCP/UDP fragments
+ */
+
+#include <asm/delay.h>
+
+unsigned int csum_partial(const unsigned char * buff, int len, unsigned int sum)
+{
+ /*
+ * Experiments with ethernet and slip connections show that buff
+ * is aligned on either a 2-byte or 4-byte boundary.
+ */
+ const unsigned char *endMarker = buff + len;
+ const unsigned char *marker = endMarker - (len % 16);
+#if 0
+ if((int)buff & 0x3)
+ printk("unaligned buff %p\n", buff);
+ __delay(900); /* extra delay of 90 us to test performance hit */
+#endif
+ BITON;
+ while (buff < marker) {
+ sum += *((unsigned short *)buff)++;
+ sum += *((unsigned short *)buff)++;
+ sum += *((unsigned short *)buff)++;
+ sum += *((unsigned short *)buff)++;
+ sum += *((unsigned short *)buff)++;
+ sum += *((unsigned short *)buff)++;
+ sum += *((unsigned short *)buff)++;
+ sum += *((unsigned short *)buff)++;
+ }
+ marker = endMarker - (len % 2);
+ while(buff < marker) {
+ sum += *((unsigned short *)buff)++;
+ }
+ if(endMarker - buff > 0) {
+ sum += *buff; /* add extra byte seperately */
+ }
+ BITOFF;
+ return(sum);
+}
+
+EXPORT_SYMBOL(csum_partial);
diff --git a/arch/cris/arch-v10/lib/string.c b/arch/cris/arch-v10/lib/string.c
new file mode 100644
index 00000000000..8ffde4901b5
--- /dev/null
+++ b/arch/cris/arch-v10/lib/string.c
@@ -0,0 +1,225 @@
+/*#************************************************************************#*/
+/*#-------------------------------------------------------------------------*/
+/*# */
+/*# FUNCTION NAME: memcpy() */
+/*# */
+/*# PARAMETERS: void* dst; Destination address. */
+/*# void* src; Source address. */
+/*# int len; Number of bytes to copy. */
+/*# */
+/*# RETURNS: dst. */
+/*# */
+/*# DESCRIPTION: Copies len bytes of memory from src to dst. No guarantees */
+/*# about copying of overlapping memory areas. This routine is */
+/*# very sensitive to compiler changes in register allocation. */
+/*# Should really be rewritten to avoid this problem. */
+/*# */
+/*#-------------------------------------------------------------------------*/
+/*# */
+/*# HISTORY */
+/*# */
+/*# DATE NAME CHANGES */
+/*# ---- ---- ------- */
+/*# 941007 Kenny R Creation */
+/*# 941011 Kenny R Lots of optimizations and inlining. */
+/*# 941129 Ulf A Adapted for use in libc. */
+/*# 950216 HP N==0 forgotten if non-aligned src/dst. */
+/*# Added some optimizations. */
+/*# 001025 HP Make src and dst char *. Align dst to */
+/*# dword, not just word-if-both-src-and-dst- */
+/*# are-misaligned. */
+/*# */
+/*#-------------------------------------------------------------------------*/
+
+#include <linux/types.h>
+
+void *memcpy(void *pdst,
+ const void *psrc,
+ size_t pn)
+{
+ /* Ok. Now we want the parameters put in special registers.
+ Make sure the compiler is able to make something useful of this.
+ As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop).
+
+ If gcc was allright, it really would need no temporaries, and no
+ stack space to save stuff on. */
+
+ register void *return_dst __asm__ ("r10") = pdst;
+ register char *dst __asm__ ("r13") = pdst;
+ register const char *src __asm__ ("r11") = psrc;
+ register int n __asm__ ("r12") = pn;
+
+
+ /* When src is aligned but not dst, this makes a few extra needless
+ cycles. I believe it would take as many to check that the
+ re-alignment was unnecessary. */
+ if (((unsigned long) dst & 3) != 0
+ /* Don't align if we wouldn't copy more than a few bytes; so we
+ don't have to check further for overflows. */
+ && n >= 3)
+ {
+ if ((unsigned long) dst & 1)
+ {
+ n--;
+ *(char*)dst = *(char*)src;
+ src++;
+ dst++;
+ }
+
+ if ((unsigned long) dst & 2)
+ {
+ n -= 2;
+ *(short*)dst = *(short*)src;
+ src += 2;
+ dst += 2;
+ }
+ }
+
+ /* Decide which copying method to use. */
+ if (n >= 44*2) /* Break even between movem and
+ move16 is at 38.7*2, but modulo 44. */
+ {
+ /* For large copies we use 'movem' */
+
+ /* It is not optimal to tell the compiler about clobbering any
+ registers; that will move the saving/restoring of those registers
+ to the function prologue/epilogue, and make non-movem sizes
+ suboptimal.
+
+ This method is not foolproof; it assumes that the "asm reg"
+ declarations at the beginning of the function really are used
+ here (beware: they may be moved to temporary registers).
+ This way, we do not have to save/move the registers around into
+ temporaries; we can safely use them straight away.
+
+ If you want to check that the allocation was right; then
+ check the equalities in the first comment. It should say
+ "r13=r13, r11=r11, r12=r12" */
+ __asm__ volatile ("
+ ;; Check that the following is true (same register names on
+ ;; both sides of equal sign, as in r8=r8):
+ ;; %0=r13, %1=r11, %2=r12
+ ;;
+ ;; Save the registers we'll use in the movem process
+ ;; on the stack.
+ subq 11*4,$sp
+ movem $r10,[$sp]
+
+ ;; Now we've got this:
+ ;; r11 - src
+ ;; r13 - dst
+ ;; r12 - n
+
+ ;; Update n for the first loop
+ subq 44,$r12
+0:
+ movem [$r11+],$r10
+ subq 44,$r12
+ bge 0b
+ movem $r10,[$r13+]
+
+ addq 44,$r12 ;; compensate for last loop underflowing n
+
+ ;; Restore registers from stack
+ movem [$sp+],$r10"
+
+ /* Outputs */ : "=r" (dst), "=r" (src), "=r" (n)
+ /* Inputs */ : "0" (dst), "1" (src), "2" (n));
+
+ }
+
+ /* Either we directly starts copying, using dword copying
+ in a loop, or we copy as much as possible with 'movem'
+ and then the last block (<44 bytes) is copied here.
+ This will work since 'movem' will have updated src,dst,n. */
+
+ while ( n >= 16 )
+ {
+ *((long*)dst)++ = *((long*)src)++;
+ *((long*)dst)++ = *((long*)src)++;
+ *((long*)dst)++ = *((long*)src)++;
+ *((long*)dst)++ = *((long*)src)++;
+ n -= 16;
+ }
+
+ /* A switch() is definitely the fastest although it takes a LOT of code.
+ * Particularly if you inline code this.
+ */
+ switch (n)
+ {
+ case 0:
+ break;
+ case 1:
+ *(char*)dst = *(char*)src;
+ break;
+ case 2:
+ *(short*)dst = *(short*)src;
+ break;
+ case 3:
+ *((short*)dst)++ = *((short*)src)++;
+ *(char*)dst = *(char*)src;
+ break;
+ case 4:
+ *((long*)dst)++ = *((long*)src)++;
+ break;
+ case 5:
+ *((long*)dst)++ = *((long*)src)++;
+ *(char*)dst = *(char*)src;
+ break;
+ case 6:
+ *((long*)dst)++ = *((long*)src)++;
+ *(short*)dst = *(short*)src;
+ break;
+ case 7:
+ *((long*)dst)++ = *((long*)src)++;
+ *((short*)dst)++ = *((short*)src)++;
+ *(char*)dst = *(char*)src;
+ break;
+ case 8:
+ *((long*)dst)++ = *((long*)src)++;
+ *((long*)dst)++ = *((long*)src)++;
+ break;
+ case 9:
+ *((long*)dst)++ = *((long*)src)++;
+ *((long*)dst)++ = *((long*)src)++;
+ *(char*)dst = *(char*)src;
+ break;
+ case 10:
+ *((long*)dst)++ = *((long*)src)++;
+ *((long*)dst)++ = *((long*)src)++;
+ *(short*)dst = *(short*)src;
+ break;
+ case 11:
+ *((long*)dst)++ = *((long*)src)++;
+ *((long*)dst)++ = *((long*)src)++;
+ *((short*)dst)++ = *((short*)src)++;
+ *(char*)dst = *(char*)src;
+ break;
+ case 12:
+ *((long*)dst)++ = *((long*)src)++;
+ *((long*)dst)++ = *((long*)src)++;
+ *((long*)dst)++ = *((long*)src)++;
+ break;
+ case 13:
+ *((long*)dst)++ = *((long*)src)++;
+ *((long*)dst)++ = *((long*)src)++;
+ *((long*)dst)++ = *((long*)src)++;
+ *(char*)dst = *(char*)src;
+ break;
+ case 14:
+ *((long*)dst)++ = *((long*)src)++;
+ *((long*)dst)++ = *((long*)src)++;
+ *((long*)dst)++ = *((long*)src)++;
+ *(short*)dst = *(short*)src;
+ break;
+ case 15:
+ *((long*)dst)++ = *((long*)src)++;
+ *((long*)dst)++ = *((long*)src)++;
+ *((long*)dst)++ = *((long*)src)++;
+ *((short*)dst)++ = *((short*)src)++;
+ *(char*)dst = *(char*)src;
+ break;
+ }
+
+ return return_dst; /* destination pointer. */
+} /* memcpy() */
diff --git a/arch/cris/arch-v10/lib/usercopy.c b/arch/cris/arch-v10/lib/usercopy.c
new file mode 100644
index 00000000000..43778d53c25
--- /dev/null
+++ b/arch/cris/arch-v10/lib/usercopy.c
@@ -0,0 +1,523 @@
+/*
+ * User address space access functions.
+ * The non-inlined parts of asm-cris/uaccess.h are here.
+ *
+ * Copyright (C) 2000, Axis Communications AB.
+ *
+ * Written by Hans-Peter Nilsson.
+ * Pieces used from memcpy, originally by Kenny Ranerup long time ago.
+ */
+
+#include <asm/uaccess.h>
+
+/* Asm:s have been tweaked (within the domain of correctness) to give
+ satisfactory results for "gcc version 2.96 20000427 (experimental)".
+
+ Check regularly...
+
+ Note that the PC saved at a bus-fault is the address *after* the
+ faulting instruction, which means the branch-target for instructions in
+ delay-slots for taken branches. Note also that the postincrement in
+ the instruction is performed regardless of bus-fault; the register is
+ seen updated in fault handlers.
+
+ Oh, and on the code formatting issue, to whomever feels like "fixing
+ it" to Conformity: I'm too "lazy", but why don't you go ahead and "fix"
+ string.c too. I just don't think too many people will hack this file
+ for the code format to be an issue. */
+
+
+/* Copy to userspace. This is based on the memcpy used for
+ kernel-to-kernel copying; see "string.c". */
+
+unsigned long
+__copy_user (void __user *pdst, const void *psrc, unsigned long pn)
+{
+ /* We want the parameters put in special registers.
+ Make sure the compiler is able to make something useful of this.
+ As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop).
+
+ FIXME: Comment for old gcc version. Check.
+ If gcc was allright, it really would need no temporaries, and no
+ stack space to save stuff on. */
+
+ register char *dst __asm__ ("r13") = pdst;
+ register const char *src __asm__ ("r11") = psrc;
+ register int n __asm__ ("r12") = pn;
+ register int retn __asm__ ("r10") = 0;
+
+
+ /* When src is aligned but not dst, this makes a few extra needless
+ cycles. I believe it would take as many to check that the
+ re-alignment was unnecessary. */
+ if (((unsigned long) dst & 3) != 0
+ /* Don't align if we wouldn't copy more than a few bytes; so we
+ don't have to check further for overflows. */
+ && n >= 3)
+ {
+ if ((unsigned long) dst & 1)
+ {
+ __asm_copy_to_user_1 (dst, src, retn);
+ n--;
+ }
+
+ if ((unsigned long) dst & 2)
+ {
+ __asm_copy_to_user_2 (dst, src, retn);
+ n -= 2;
+ }
+ }
+
+ /* Decide which copying method to use. */
+ if (n >= 44*2) /* Break even between movem and
+ move16 is at 38.7*2, but modulo 44. */
+ {
+ /* For large copies we use 'movem'. */
+
+ /* It is not optimal to tell the compiler about clobbering any
+ registers; that will move the saving/restoring of those registers
+ to the function prologue/epilogue, and make non-movem sizes
+ suboptimal.
+
+ This method is not foolproof; it assumes that the "asm reg"
+ declarations at the beginning of the function really are used
+ here (beware: they may be moved to temporary registers).
+ This way, we do not have to save/move the registers around into
+ temporaries; we can safely use them straight away.
+
+ If you want to check that the allocation was right; then
+ check the equalities in the first comment. It should say
+ "r13=r13, r11=r11, r12=r12". */
+ __asm__ volatile ("\
+ .ifnc %0%1%2%3,$r13$r11$r12$r10 \n\
+ .err \n\
+ .endif \n\
+
+ ;; Save the registers we'll use in the movem process
+ ;; on the stack.
+ subq 11*4,$sp
+ movem $r10,[$sp]
+
+ ;; Now we've got this:
+ ;; r11 - src
+ ;; r13 - dst
+ ;; r12 - n
+
+ ;; Update n for the first loop
+ subq 44,$r12
+
+; Since the noted PC of a faulting instruction in a delay-slot of a taken
+; branch, is that of the branch target, we actually point at the from-movem
+; for this case. There is no ambiguity here; if there was a fault in that
+; instruction (meaning a kernel oops), the faulted PC would be the address
+; after *that* movem.
+
+0:
+ movem [$r11+],$r10
+ subq 44,$r12
+ bge 0b
+ movem $r10,[$r13+]
+1:
+ addq 44,$r12 ;; compensate for last loop underflowing n
+
+ ;; Restore registers from stack
+ movem [$sp+],$r10
+2:
+ .section .fixup,\"ax\"
+
+; To provide a correct count in r10 of bytes that failed to be copied,
+; we jump back into the loop if the loop-branch was taken. There is no
+; performance penalty for sany use; the program will segfault soon enough.
+
+3:
+ move.d [$sp],$r10
+ addq 44,$r10
+ move.d $r10,[$sp]
+ jump 0b
+4:
+ movem [$sp+],$r10
+ addq 44,$r10
+ addq 44,$r12
+ jump 2b
+
+ .previous
+ .section __ex_table,\"a\"
+ .dword 0b,3b
+ .dword 1b,4b
+ .previous"
+
+ /* Outputs */ : "=r" (dst), "=r" (src), "=r" (n), "=r" (retn)
+ /* Inputs */ : "0" (dst), "1" (src), "2" (n), "3" (retn));
+
+ }
+
+ /* Either we directly start copying, using dword copying in a loop, or
+ we copy as much as possible with 'movem' and then the last block (<44
+ bytes) is copied here. This will work since 'movem' will have
+ updated SRC, DST and N. */
+
+ while (n >= 16)
+ {
+ __asm_copy_to_user_16 (dst, src, retn);
+ n -= 16;
+ }
+
+ /* Having a separate by-four loops cuts down on cache footprint.
+ FIXME: Test with and without; increasing switch to be 0..15. */
+ while (n >= 4)
+ {
+ __asm_copy_to_user_4 (dst, src, retn);
+ n -= 4;
+ }
+
+ switch (n)
+ {
+ case 0:
+ break;
+ case 1:
+ __asm_copy_to_user_1 (dst, src, retn);
+ break;
+ case 2:
+ __asm_copy_to_user_2 (dst, src, retn);
+ break;
+ case 3:
+ __asm_copy_to_user_3 (dst, src, retn);
+ break;
+ }
+
+ return retn;
+}
+
+/* Copy from user to kernel, zeroing the bytes that were inaccessible in
+ userland. The return-value is the number of bytes that were
+ inaccessible. */
+
+unsigned long
+__copy_user_zeroing (void __user *pdst, const void *psrc, unsigned long pn)
+{
+ /* We want the parameters put in special registers.
+ Make sure the compiler is able to make something useful of this.
+ As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop).
+
+ FIXME: Comment for old gcc version. Check.
+ If gcc was allright, it really would need no temporaries, and no
+ stack space to save stuff on. */
+
+ register char *dst __asm__ ("r13") = pdst;
+ register const char *src __asm__ ("r11") = psrc;
+ register int n __asm__ ("r12") = pn;
+ register int retn __asm__ ("r10") = 0;
+
+ /* The best reason to align src is that we then know that a read-fault
+ was for aligned bytes; there's no 1..3 remaining good bytes to
+ pickle. */
+ if (((unsigned long) src & 3) != 0)
+ {
+ if (((unsigned long) src & 1) && n != 0)
+ {
+ __asm_copy_from_user_1 (dst, src, retn);
+ n--;
+ }
+
+ if (((unsigned long) src & 2) && n >= 2)
+ {
+ __asm_copy_from_user_2 (dst, src, retn);
+ n -= 2;
+ }
+
+ /* We only need one check after the unalignment-adjustments, because
+ if both adjustments were done, either both or neither reference
+ had an exception. */
+ if (retn != 0)
+ goto copy_exception_bytes;
+ }
+
+ /* Decide which copying method to use. */
+ if (n >= 44*2) /* Break even between movem and
+ move16 is at 38.7*2, but modulo 44.
+ FIXME: We use move4 now. */
+ {
+ /* For large copies we use 'movem' */
+
+ /* It is not optimal to tell the compiler about clobbering any
+ registers; that will move the saving/restoring of those registers
+ to the function prologue/epilogue, and make non-movem sizes
+ suboptimal.
+
+ This method is not foolproof; it assumes that the "asm reg"
+ declarations at the beginning of the function really are used
+ here (beware: they may be moved to temporary registers).
+ This way, we do not have to save/move the registers around into
+ temporaries; we can safely use them straight away.
+
+ If you want to check that the allocation was right; then
+ check the equalities in the first comment. It should say
+ "r13=r13, r11=r11, r12=r12" */
+ __asm__ volatile ("
+ .ifnc %0%1%2%3,$r13$r11$r12$r10 \n\
+ .err \n\
+ .endif \n\
+
+ ;; Save the registers we'll use in the movem process
+ ;; on the stack.
+ subq 11*4,$sp
+ movem $r10,[$sp]
+
+ ;; Now we've got this:
+ ;; r11 - src
+ ;; r13 - dst
+ ;; r12 - n
+
+ ;; Update n for the first loop
+ subq 44,$r12
+0:
+ movem [$r11+],$r10
+1:
+ subq 44,$r12
+ bge 0b
+ movem $r10,[$r13+]
+
+ addq 44,$r12 ;; compensate for last loop underflowing n
+
+ ;; Restore registers from stack
+ movem [$sp+],$r10
+4:
+ .section .fixup,\"ax\"
+
+;; Do not jump back into the loop if we fail. For some uses, we get a
+;; page fault somewhere on the line. Without checking for page limits,
+;; we don't know where, but we need to copy accurately and keep an
+;; accurate count; not just clear the whole line. To do that, we fall
+;; down in the code below, proceeding with smaller amounts. It should
+;; be kept in mind that we have to cater to code like what at one time
+;; was in fs/super.c:
+;; i = size - copy_from_user((void *)page, data, size);
+;; which would cause repeated faults while clearing the remainder of
+;; the SIZE bytes at PAGE after the first fault.
+;; A caveat here is that we must not fall through from a failing page
+;; to a valid page.
+
+3:
+ movem [$sp+],$r10
+ addq 44,$r12 ;; Get back count before faulting point.
+ subq 44,$r11 ;; Get back pointer to faulting movem-line.
+ jump 4b ;; Fall through, pretending the fault didn't happen.
+
+ .previous
+ .section __ex_table,\"a\"
+ .dword 1b,3b
+ .previous"
+
+ /* Outputs */ : "=r" (dst), "=r" (src), "=r" (n), "=r" (retn)
+ /* Inputs */ : "0" (dst), "1" (src), "2" (n), "3" (retn));
+
+ }
+
+ /* Either we directly start copying here, using dword copying in a loop,
+ or we copy as much as possible with 'movem' and then the last block
+ (<44 bytes) is copied here. This will work since 'movem' will have
+ updated src, dst and n. (Except with failing src.)
+
+ Since we want to keep src accurate, we can't use
+ __asm_copy_from_user_N with N != (1, 2, 4); it updates dst and
+ retn, but not src (by design; it's value is ignored elsewhere). */
+
+ while (n >= 4)
+ {
+ __asm_copy_from_user_4 (dst, src, retn);
+ n -= 4;
+
+ if (retn)
+ goto copy_exception_bytes;
+ }
+
+ /* If we get here, there were no memory read faults. */
+ switch (n)
+ {
+ /* These copies are at least "naturally aligned" (so we don't have
+ to check each byte), due to the src alignment code before the
+ movem loop. The *_3 case *will* get the correct count for retn. */
+ case 0:
+ /* This case deliberately left in (if you have doubts check the
+ generated assembly code). */
+ break;
+ case 1:
+ __asm_copy_from_user_1 (dst, src, retn);
+ break;
+ case 2:
+ __asm_copy_from_user_2 (dst, src, retn);
+ break;
+ case 3:
+ __asm_copy_from_user_3 (dst, src, retn);
+ break;
+ }
+
+ /* If we get here, retn correctly reflects the number of failing
+ bytes. */
+ return retn;
+
+copy_exception_bytes:
+ /* We already have "retn" bytes cleared, and need to clear the
+ remaining "n" bytes. A non-optimized simple byte-for-byte in-line
+ memset is preferred here, since this isn't speed-critical code and
+ we'd rather have this a leaf-function than calling memset. */
+ {
+ char *endp;
+ for (endp = dst + n; dst < endp; dst++)
+ *dst = 0;
+ }
+
+ return retn + n;
+}
+
+/* Zero userspace. */
+
+unsigned long
+__do_clear_user (void __user *pto, unsigned long pn)
+{
+ /* We want the parameters put in special registers.
+ Make sure the compiler is able to make something useful of this.
+ As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop).
+
+ FIXME: Comment for old gcc version. Check.
+ If gcc was allright, it really would need no temporaries, and no
+ stack space to save stuff on. */
+
+ register char *dst __asm__ ("r13") = pto;
+ register int n __asm__ ("r12") = pn;
+ register int retn __asm__ ("r10") = 0;
+
+
+ if (((unsigned long) dst & 3) != 0
+ /* Don't align if we wouldn't copy more than a few bytes. */
+ && n >= 3)
+ {
+ if ((unsigned long) dst & 1)
+ {
+ __asm_clear_1 (dst, retn);
+ n--;
+ }
+
+ if ((unsigned long) dst & 2)
+ {
+ __asm_clear_2 (dst, retn);
+ n -= 2;
+ }
+ }
+
+ /* Decide which copying method to use.
+ FIXME: This number is from the "ordinary" kernel memset. */
+ if (n >= (1*48))
+ {
+ /* For large clears we use 'movem' */
+
+ /* It is not optimal to tell the compiler about clobbering any
+ call-saved registers; that will move the saving/restoring of
+ those registers to the function prologue/epilogue, and make
+ non-movem sizes suboptimal.
+
+ This method is not foolproof; it assumes that the "asm reg"
+ declarations at the beginning of the function really are used
+ here (beware: they may be moved to temporary registers).
+ This way, we do not have to save/move the registers around into
+ temporaries; we can safely use them straight away.
+
+ If you want to check that the allocation was right; then
+ check the equalities in the first comment. It should say
+ something like "r13=r13, r11=r11, r12=r12". */
+ __asm__ volatile ("
+ .ifnc %0%1%2,$r13$r12$r10 \n\
+ .err \n\
+ .endif \n\
+
+ ;; Save the registers we'll clobber in the movem process
+ ;; on the stack. Don't mention them to gcc, it will only be
+ ;; upset.
+ subq 11*4,$sp
+ movem $r10,[$sp]
+
+ clear.d $r0
+ clear.d $r1
+ clear.d $r2
+ clear.d $r3
+ clear.d $r4
+ clear.d $r5
+ clear.d $r6
+ clear.d $r7
+ clear.d $r8
+ clear.d $r9
+ clear.d $r10
+ clear.d $r11
+
+ ;; Now we've got this:
+ ;; r13 - dst
+ ;; r12 - n
+
+ ;; Update n for the first loop
+ subq 12*4,$r12
+0:
+ subq 12*4,$r12
+ bge 0b
+ movem $r11,[$r13+]
+1:
+ addq 12*4,$r12 ;; compensate for last loop underflowing n
+
+ ;; Restore registers from stack
+ movem [$sp+],$r10
+2:
+ .section .fixup,\"ax\"
+3:
+ move.d [$sp],$r10
+ addq 12*4,$r10
+ move.d $r10,[$sp]
+ clear.d $r10
+ jump 0b
+
+4:
+ movem [$sp+],$r10
+ addq 12*4,$r10
+ addq 12*4,$r12
+ jump 2b
+
+ .previous
+ .section __ex_table,\"a\"
+ .dword 0b,3b
+ .dword 1b,4b
+ .previous"
+
+ /* Outputs */ : "=r" (dst), "=r" (n), "=r" (retn)
+ /* Inputs */ : "0" (dst), "1" (n), "2" (retn)
+ /* Clobber */ : "r11");
+ }
+
+ while (n >= 16)
+ {
+ __asm_clear_16 (dst, retn);
+ n -= 16;
+ }
+
+ /* Having a separate by-four loops cuts down on cache footprint.
+ FIXME: Test with and without; increasing switch to be 0..15. */
+ while (n >= 4)
+ {
+ __asm_clear_4 (dst, retn);
+ n -= 4;
+ }
+
+ switch (n)
+ {
+ case 0:
+ break;
+ case 1:
+ __asm_clear_1 (dst, retn);
+ break;
+ case 2:
+ __asm_clear_2 (dst, retn);
+ break;
+ case 3:
+ __asm_clear_3 (dst, retn);
+ break;
+ }
+
+ return retn;
+}
diff --git a/arch/cris/arch-v10/mm/Makefile b/arch/cris/arch-v10/mm/Makefile
new file mode 100644
index 00000000000..588b4baee85
--- /dev/null
+++ b/arch/cris/arch-v10/mm/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the linux cris-specific parts of the memory manager.
+#
+
+obj-y := fault.o init.o tlb.o
+
diff --git a/arch/cris/arch-v10/mm/fault.c b/arch/cris/arch-v10/mm/fault.c
new file mode 100644
index 00000000000..6805cdb25a5
--- /dev/null
+++ b/arch/cris/arch-v10/mm/fault.c
@@ -0,0 +1,117 @@
+/*
+ * linux/arch/cris/mm/fault.c
+ *
+ * Low level bus fault handler
+ *
+ *
+ * Copyright (C) 2000, 2001 Axis Communications AB
+ *
+ * Authors: Bjorn Wesen
+ *
+ */
+
+#include <linux/mm.h>
+#include <asm/uaccess.h>
+#include <asm/pgtable.h>
+#include <asm/arch/svinto.h>
+
+/* debug of low-level TLB reload */
+#undef DEBUG
+
+#ifdef DEBUG
+#define D(x) x
+#else
+#define D(x)
+#endif
+
+extern volatile pgd_t *current_pgd;
+
+extern const struct exception_table_entry
+ *search_exception_tables(unsigned long addr);
+
+asmlinkage void do_page_fault(unsigned long address, struct pt_regs *regs,
+ int protection, int writeaccess);
+
+/* fast TLB-fill fault handler
+ * this is called from entry.S with interrupts disabled
+ */
+
+void
+handle_mmu_bus_fault(struct pt_regs *regs)
+{
+ int cause;
+ int select;
+#ifdef DEBUG
+ int index;
+ int page_id;
+ int acc, inv;
+#endif
+ pgd_t* pgd = (pgd_t*)current_pgd;
+ pmd_t *pmd;
+ pte_t pte;
+ int miss, we, writeac;
+ unsigned long address;
+ unsigned long flags;
+
+ cause = *R_MMU_CAUSE;
+
+ address = cause & PAGE_MASK; /* get faulting address */
+ select = *R_TLB_SELECT;
+
+#ifdef DEBUG
+ page_id = IO_EXTRACT(R_MMU_CAUSE, page_id, cause);
+ acc = IO_EXTRACT(R_MMU_CAUSE, acc_excp, cause);
+ inv = IO_EXTRACT(R_MMU_CAUSE, inv_excp, cause);
+ index = IO_EXTRACT(R_TLB_SELECT, index, select);
+#endif
+ miss = IO_EXTRACT(R_MMU_CAUSE, miss_excp, cause);
+ we = IO_EXTRACT(R_MMU_CAUSE, we_excp, cause);
+ writeac = IO_EXTRACT(R_MMU_CAUSE, wr_rd, cause);
+
+ D(printk("bus_fault from IRP 0x%lx: addr 0x%lx, miss %d, inv %d, we %d, acc %d, dx %d pid %d\n",
+ regs->irp, address, miss, inv, we, acc, index, page_id));
+
+ /* leave it to the MM system fault handler */
+ if (miss)
+ do_page_fault(address, regs, 0, writeac);
+ else
+ do_page_fault(address, regs, 1, we);
+
+ /* Reload TLB with new entry to avoid an extra miss exception.
+ * do_page_fault may have flushed the TLB so we have to restore
+ * the MMU registers.
+ */
+ local_save_flags(flags);
+ local_irq_disable();
+ pmd = (pmd_t *)(pgd + pgd_index(address));
+ if (pmd_none(*pmd))
+ return;
+ pte = *pte_offset_kernel(pmd, address);
+ if (!pte_present(pte))
+ return;
+ *R_TLB_SELECT = select;
+ *R_TLB_HI = cause;
+ *R_TLB_LO = pte_val(pte);
+ local_irq_restore(flags);
+}
+
+/* Called from arch/cris/mm/fault.c to find fixup code. */
+int
+find_fixup_code(struct pt_regs *regs)
+{
+ const struct exception_table_entry *fixup;
+
+ if ((fixup = search_exception_tables(regs->irp)) != 0) {
+ /* Adjust the instruction pointer in the stackframe. */
+ regs->irp = fixup->fixup;
+
+ /*
+ * Don't return by restoring the CPU state, so switch
+ * frame-type.
+ */
+ regs->frametype = CRIS_FRAME_NORMAL;
+ return 1;
+ }
+
+ return 0;
+}
diff --git a/arch/cris/arch-v10/mm/init.c b/arch/cris/arch-v10/mm/init.c
new file mode 100644
index 00000000000..a9f975a9cfb
--- /dev/null
+++ b/arch/cris/arch-v10/mm/init.c
@@ -0,0 +1,264 @@
+/*
+ * linux/arch/cris/arch-v10/mm/init.c
+ *
+ */
+#include <linux/config.h>
+#include <linux/mmzone.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/mm.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/types.h>
+#include <asm/mmu.h>
+#include <asm/io.h>
+#include <asm/mmu_context.h>
+#include <asm/arch/svinto.h>
+
+extern void tlb_init(void);
+
+/*
+ * The kernel is already mapped with a kernel segment at kseg_c so
+ * we don't need to map it with a page table. However head.S also
+ * temporarily mapped it at kseg_4 so we should set up the ksegs again,
+ * clear the TLB and do some other paging setup stuff.
+ */
+
+void __init
+paging_init(void)
+{
+ int i;
+ unsigned long zones_size[MAX_NR_ZONES];
+
+ printk("Setting up paging and the MMU.\n");
+
+ /* clear out the init_mm.pgd that will contain the kernel's mappings */
+
+ for(i = 0; i < PTRS_PER_PGD; i++)
+ swapper_pg_dir[i] = __pgd(0);
+
+ /* make sure the current pgd table points to something sane
+ * (even if it is most probably not used until the next
+ * switch_mm)
+ */
+
+ current_pgd = init_mm.pgd;
+
+ /* initialise the TLB (tlb.c) */
+
+ tlb_init();
+
+ /* see README.mm for details on the KSEG setup */
+
+#ifdef CONFIG_CRIS_LOW_MAP
+ /* Etrax-100 LX version 1 has a bug so that we cannot map anything
+ * across the 0x80000000 boundary, so we need to shrink the user-virtual
+ * area to 0x50000000 instead of 0xb0000000 and map things slightly
+ * different. The unused areas are marked as paged so that we can catch
+ * freak kernel accesses there.
+ *
+ * The ARTPEC chip is mapped at 0xa so we pass that segment straight
+ * through. We cannot vremap it because the vmalloc area is below 0x8
+ * and Juliette needs an uncached area above 0x8.
+ *
+ * Same thing with 0xc and 0x9, which is memory-mapped I/O on some boards.
+ * We map them straight over in LOW_MAP, but use vremap in LX version 2.
+ */
+
+#define CACHED_BOOTROM (KSEG_F | 0x08000000UL)
+
+ *R_MMU_KSEG = ( IO_STATE(R_MMU_KSEG, seg_f, seg ) | /* bootrom */
+ IO_STATE(R_MMU_KSEG, seg_e, page ) |
+ IO_STATE(R_MMU_KSEG, seg_d, page ) |
+ IO_STATE(R_MMU_KSEG, seg_c, page ) |
+ IO_STATE(R_MMU_KSEG, seg_b, seg ) | /* kernel reg area */
+#ifdef CONFIG_JULIETTE
+ IO_STATE(R_MMU_KSEG, seg_a, seg ) | /* ARTPEC etc. */
+#else
+ IO_STATE(R_MMU_KSEG, seg_a, page ) |
+#endif
+ IO_STATE(R_MMU_KSEG, seg_9, seg ) | /* LED's on some boards */
+ IO_STATE(R_MMU_KSEG, seg_8, seg ) | /* CSE0/1, flash and I/O */
+ IO_STATE(R_MMU_KSEG, seg_7, page ) | /* kernel vmalloc area */
+ IO_STATE(R_MMU_KSEG, seg_6, seg ) | /* kernel DRAM area */
+ IO_STATE(R_MMU_KSEG, seg_5, seg ) | /* cached flash */
+ IO_STATE(R_MMU_KSEG, seg_4, page ) | /* user area */
+ IO_STATE(R_MMU_KSEG, seg_3, page ) | /* user area */
+ IO_STATE(R_MMU_KSEG, seg_2, page ) | /* user area */
+ IO_STATE(R_MMU_KSEG, seg_1, page ) | /* user area */
+ IO_STATE(R_MMU_KSEG, seg_0, page ) ); /* user area */
+
+ *R_MMU_KBASE_HI = ( IO_FIELD(R_MMU_KBASE_HI, base_f, 0x3 ) |
+ IO_FIELD(R_MMU_KBASE_HI, base_e, 0x0 ) |
+ IO_FIELD(R_MMU_KBASE_HI, base_d, 0x0 ) |
+ IO_FIELD(R_MMU_KBASE_HI, base_c, 0x0 ) |
+ IO_FIELD(R_MMU_KBASE_HI, base_b, 0xb ) |
+#ifdef CONFIG_JULIETTE
+ IO_FIELD(R_MMU_KBASE_HI, base_a, 0xa ) |
+#else
+ IO_FIELD(R_MMU_KBASE_HI, base_a, 0x0 ) |
+#endif
+ IO_FIELD(R_MMU_KBASE_HI, base_9, 0x9 ) |
+ IO_FIELD(R_MMU_KBASE_HI, base_8, 0x8 ) );
+
+ *R_MMU_KBASE_LO = ( IO_FIELD(R_MMU_KBASE_LO, base_7, 0x0 ) |
+ IO_FIELD(R_MMU_KBASE_LO, base_6, 0x4 ) |
+ IO_FIELD(R_MMU_KBASE_LO, base_5, 0x0 ) |
+ IO_FIELD(R_MMU_KBASE_LO, base_4, 0x0 ) |
+ IO_FIELD(R_MMU_KBASE_LO, base_3, 0x0 ) |
+ IO_FIELD(R_MMU_KBASE_LO, base_2, 0x0 ) |
+ IO_FIELD(R_MMU_KBASE_LO, base_1, 0x0 ) |
+ IO_FIELD(R_MMU_KBASE_LO, base_0, 0x0 ) );
+#else
+ /* This code is for the corrected Etrax-100 LX version 2... */
+
+#define CACHED_BOOTROM (KSEG_A | 0x08000000UL)
+
+ *R_MMU_KSEG = ( IO_STATE(R_MMU_KSEG, seg_f, seg ) | /* cached flash */
+ IO_STATE(R_MMU_KSEG, seg_e, seg ) | /* uncached flash */
+ IO_STATE(R_MMU_KSEG, seg_d, page ) | /* vmalloc area */
+ IO_STATE(R_MMU_KSEG, seg_c, seg ) | /* kernel area */
+ IO_STATE(R_MMU_KSEG, seg_b, seg ) | /* kernel reg area */
+ IO_STATE(R_MMU_KSEG, seg_a, seg ) | /* bootrom */
+ IO_STATE(R_MMU_KSEG, seg_9, page ) | /* user area */
+ IO_STATE(R_MMU_KSEG, seg_8, page ) |
+ IO_STATE(R_MMU_KSEG, seg_7, page ) |
+ IO_STATE(R_MMU_KSEG, seg_6, page ) |
+ IO_STATE(R_MMU_KSEG, seg_5, page ) |
+ IO_STATE(R_MMU_KSEG, seg_4, page ) |
+ IO_STATE(R_MMU_KSEG, seg_3, page ) |
+ IO_STATE(R_MMU_KSEG, seg_2, page ) |
+ IO_STATE(R_MMU_KSEG, seg_1, page ) |
+ IO_STATE(R_MMU_KSEG, seg_0, page ) );
+
+ *R_MMU_KBASE_HI = ( IO_FIELD(R_MMU_KBASE_HI, base_f, 0x0 ) |
+ IO_FIELD(R_MMU_KBASE_HI, base_e, 0x8 ) |
+ IO_FIELD(R_MMU_KBASE_HI, base_d, 0x0 ) |
+ IO_FIELD(R_MMU_KBASE_HI, base_c, 0x4 ) |
+ IO_FIELD(R_MMU_KBASE_HI, base_b, 0xb ) |
+ IO_FIELD(R_MMU_KBASE_HI, base_a, 0x3 ) |
+ IO_FIELD(R_MMU_KBASE_HI, base_9, 0x0 ) |
+ IO_FIELD(R_MMU_KBASE_HI, base_8, 0x0 ) );
+
+ *R_MMU_KBASE_LO = ( IO_FIELD(R_MMU_KBASE_LO, base_7, 0x0 ) |
+ IO_FIELD(R_MMU_KBASE_LO, base_6, 0x0 ) |
+ IO_FIELD(R_MMU_KBASE_LO, base_5, 0x0 ) |
+ IO_FIELD(R_MMU_KBASE_LO, base_4, 0x0 ) |
+ IO_FIELD(R_MMU_KBASE_LO, base_3, 0x0 ) |
+ IO_FIELD(R_MMU_KBASE_LO, base_2, 0x0 ) |
+ IO_FIELD(R_MMU_KBASE_LO, base_1, 0x0 ) |
+ IO_FIELD(R_MMU_KBASE_LO, base_0, 0x0 ) );
+#endif
+
+ *R_MMU_CONTEXT = ( IO_FIELD(R_MMU_CONTEXT, page_id, 0 ) );
+
+ /* The MMU has been enabled ever since head.S but just to make
+ * it totally obvious we do it here as well.
+ */
+
+ *R_MMU_CTRL = ( IO_STATE(R_MMU_CTRL, inv_excp, enable ) |
+ IO_STATE(R_MMU_CTRL, acc_excp, enable ) |
+ IO_STATE(R_MMU_CTRL, we_excp, enable ) );
+
+ *R_MMU_ENABLE = IO_STATE(R_MMU_ENABLE, mmu_enable, enable);
+
+ /*
+ * initialize the bad page table and bad page to point
+ * to a couple of allocated pages
+ */
+
+ empty_zero_page = (unsigned long)alloc_bootmem_pages(PAGE_SIZE);
+ memset((void *)empty_zero_page, 0, PAGE_SIZE);
+
+ /* All pages are DMA'able in Etrax, so put all in the DMA'able zone */
+
+ zones_size[0] = ((unsigned long)high_memory - PAGE_OFFSET) >> PAGE_SHIFT;
+
+ for (i = 1; i < MAX_NR_ZONES; i++)
+ zones_size[i] = 0;
+
+ /* Use free_area_init_node instead of free_area_init, because the former
+ * is designed for systems where the DRAM starts at an address substantially
+ * higher than 0, like us (we start at PAGE_OFFSET). This saves space in the
+ * mem_map page array.
+ */
+
+ free_area_init_node(0, &contig_page_data, zones_size, PAGE_OFFSET >> PAGE_SHIFT, 0);
+}
+
+/* Initialize remaps of some I/O-ports. It is important that this
+ * is called before any driver is initialized.
+ */
+
+static int
+__init init_ioremap(void)
+{
+
+ /* Give the external I/O-port addresses their values */
+
+#ifdef CONFIG_CRIS_LOW_MAP
+ /* Simply a linear map (see the KSEG map above in paging_init) */
+ port_cse1_addr = (volatile unsigned long *)(MEM_CSE1_START |
+ MEM_NON_CACHEABLE);
+ port_csp0_addr = (volatile unsigned long *)(MEM_CSP0_START |
+ MEM_NON_CACHEABLE);
+ port_csp4_addr = (volatile unsigned long *)(MEM_CSP4_START |
+ MEM_NON_CACHEABLE);
+#else
+ /* Note that nothing blows up just because we do this remapping
+ * it's ok even if the ports are not used or connected
+ * to anything (or connected to a non-I/O thing) */
+ port_cse1_addr = (volatile unsigned long *)
+ ioremap((unsigned long)(MEM_CSE1_START | MEM_NON_CACHEABLE), 16);
+ port_csp0_addr = (volatile unsigned long *)
+ ioremap((unsigned long)(MEM_CSP0_START | MEM_NON_CACHEABLE), 16);
+ port_csp4_addr = (volatile unsigned long *)
+ ioremap((unsigned long)(MEM_CSP4_START | MEM_NON_CACHEABLE), 16);
+#endif
+ return 0;
+}
+
+__initcall(init_ioremap);
+
+/* Helper function for the two below */
+
+static inline void
+flush_etrax_cacherange(void *startadr, int length)
+{
+ /* CACHED_BOOTROM is mapped to the boot-rom area (cached) which
+ * we can use to get fast dummy-reads of cachelines
+ */
+
+ volatile short *flushadr = (volatile short *)(((unsigned long)startadr & ~PAGE_MASK) |
+ CACHED_BOOTROM);
+
+ length = length > 8192 ? 8192 : length; /* No need to flush more than cache size */
+
+ while(length > 0) {
+ *flushadr; /* dummy read to flush */
+ flushadr += (32/sizeof(short)); /* a cacheline is 32 bytes */
+ length -= 32;
+ }
+}
+
+/* Due to a bug in Etrax100(LX) all versions, receiving DMA buffers
+ * will occationally corrupt certain CPU writes if the DMA buffers
+ * happen to be hot in the cache.
+ *
+ * As a workaround, we have to flush the relevant parts of the cache
+ * before (re) inserting any receiving descriptor into the DMA HW.
+ */
+
+void
+prepare_rx_descriptor(struct etrax_dma_descr *desc)
+{
+ flush_etrax_cacherange((void *)desc->buf, desc->sw_len ? desc->sw_len : 65536);
+}
+
+/* Do the same thing but flush the entire cache */
+
+void
+flush_etrax_cache(void)
+{
+ flush_etrax_cacherange(0, 8192);
+}
diff --git a/arch/cris/arch-v10/mm/tlb.c b/arch/cris/arch-v10/mm/tlb.c
new file mode 100644
index 00000000000..9d06125ff5a
--- /dev/null
+++ b/arch/cris/arch-v10/mm/tlb.c
@@ -0,0 +1,248 @@
+/*
+ * linux/arch/cris/arch-v10/mm/tlb.c
+ *
+ * Low level TLB handling
+ *
+ *
+ * Copyright (C) 2000-2002 Axis Communications AB
+ *
+ * Authors: Bjorn Wesen (bjornw@axis.com)
+ *
+ */
+
+#include <asm/tlb.h>
+#include <asm/mmu_context.h>
+#include <asm/arch/svinto.h>
+
+#define D(x)
+
+/* The TLB can host up to 64 different mm contexts at the same time.
+ * The running context is R_MMU_CONTEXT, and each TLB entry contains a
+ * page_id that has to match to give a hit. In page_id_map, we keep track
+ * of which mm's we have assigned which page_id's, so that we know when
+ * to invalidate TLB entries.
+ *
+ * The last page_id is never running - it is used as an invalid page_id
+ * so we can make TLB entries that will never match.
+ *
+ * Notice that we need to make the flushes atomic, otherwise an interrupt
+ * handler that uses vmalloced memory might cause a TLB load in the middle
+ * of a flush causing.
+ */
+
+/* invalidate all TLB entries */
+
+void
+flush_tlb_all(void)
+{
+ int i;
+ unsigned long flags;
+
+ /* the vpn of i & 0xf is so we dont write similar TLB entries
+ * in the same 4-way entry group. details..
+ */
+
+ local_save_flags(flags);
+ local_irq_disable();
+ for(i = 0; i < NUM_TLB_ENTRIES; i++) {
+ *R_TLB_SELECT = ( IO_FIELD(R_TLB_SELECT, index, i) );
+ *R_TLB_HI = ( IO_FIELD(R_TLB_HI, page_id, INVALID_PAGEID ) |
+ IO_FIELD(R_TLB_HI, vpn, i & 0xf ) );
+
+ *R_TLB_LO = ( IO_STATE(R_TLB_LO, global,no ) |
+ IO_STATE(R_TLB_LO, valid, no ) |
+ IO_STATE(R_TLB_LO, kernel,no ) |
+ IO_STATE(R_TLB_LO, we, no ) |
+ IO_FIELD(R_TLB_LO, pfn, 0 ) );
+ }
+ local_irq_restore(flags);
+ D(printk("tlb: flushed all\n"));
+}
+
+/* invalidate the selected mm context only */
+
+void
+flush_tlb_mm(struct mm_struct *mm)
+{
+ int i;
+ int page_id = mm->context.page_id;
+ unsigned long flags;
+
+ D(printk("tlb: flush mm context %d (%p)\n", page_id, mm));
+
+ if(page_id == NO_CONTEXT)
+ return;
+
+ /* mark the TLB entries that match the page_id as invalid.
+ * here we could also check the _PAGE_GLOBAL bit and NOT flush
+ * global pages. is it worth the extra I/O ?
+ */
+
+ local_save_flags(flags);
+ local_irq_disable();
+ for(i = 0; i < NUM_TLB_ENTRIES; i++) {
+ *R_TLB_SELECT = IO_FIELD(R_TLB_SELECT, index, i);
+ if (IO_EXTRACT(R_TLB_HI, page_id, *R_TLB_HI) == page_id) {
+ *R_TLB_HI = ( IO_FIELD(R_TLB_HI, page_id, INVALID_PAGEID ) |
+ IO_FIELD(R_TLB_HI, vpn, i & 0xf ) );
+
+ *R_TLB_LO = ( IO_STATE(R_TLB_LO, global,no ) |
+ IO_STATE(R_TLB_LO, valid, no ) |
+ IO_STATE(R_TLB_LO, kernel,no ) |
+ IO_STATE(R_TLB_LO, we, no ) |
+ IO_FIELD(R_TLB_LO, pfn, 0 ) );
+ }
+ }
+ local_irq_restore(flags);
+}
+
+/* invalidate a single page */
+
+void
+flush_tlb_page(struct vm_area_struct *vma,
+ unsigned long addr)
+{
+ struct mm_struct *mm = vma->vm_mm;
+ int page_id = mm->context.page_id;
+ int i;
+ unsigned long flags;
+
+ D(printk("tlb: flush page %p in context %d (%p)\n", addr, page_id, mm));
+
+ if(page_id == NO_CONTEXT)
+ return;
+
+ addr &= PAGE_MASK; /* perhaps not necessary */
+
+ /* invalidate those TLB entries that match both the mm context
+ * and the virtual address requested
+ */
+
+ local_save_flags(flags);
+ local_irq_disable();
+ for(i = 0; i < NUM_TLB_ENTRIES; i++) {
+ unsigned long tlb_hi;
+ *R_TLB_SELECT = IO_FIELD(R_TLB_SELECT, index, i);
+ tlb_hi = *R_TLB_HI;
+ if (IO_EXTRACT(R_TLB_HI, page_id, tlb_hi) == page_id &&
+ (tlb_hi & PAGE_MASK) == addr) {
+ *R_TLB_HI = IO_FIELD(R_TLB_HI, page_id, INVALID_PAGEID ) |
+ addr; /* same addr as before works. */
+
+ *R_TLB_LO = ( IO_STATE(R_TLB_LO, global,no ) |
+ IO_STATE(R_TLB_LO, valid, no ) |
+ IO_STATE(R_TLB_LO, kernel,no ) |
+ IO_STATE(R_TLB_LO, we, no ) |
+ IO_FIELD(R_TLB_LO, pfn, 0 ) );
+ }
+ }
+ local_irq_restore(flags);
+}
+
+/* invalidate a page range */
+
+void
+flush_tlb_range(struct vm_area_struct *vma,
+ unsigned long start,
+ unsigned long end)
+{
+ struct mm_struct *mm = vma->vm_mm;
+ int page_id = mm->context.page_id;
+ int i;
+ unsigned long flags;
+
+ D(printk("tlb: flush range %p<->%p in context %d (%p)\n",
+ start, end, page_id, mm));
+
+ if(page_id == NO_CONTEXT)
+ return;
+
+ start &= PAGE_MASK; /* probably not necessary */
+ end &= PAGE_MASK; /* dito */
+
+ /* invalidate those TLB entries that match both the mm context
+ * and the virtual address range
+ */
+
+ local_save_flags(flags);
+ local_irq_disable();
+ for(i = 0; i < NUM_TLB_ENTRIES; i++) {
+ unsigned long tlb_hi, vpn;
+ *R_TLB_SELECT = IO_FIELD(R_TLB_SELECT, index, i);
+ tlb_hi = *R_TLB_HI;
+ vpn = tlb_hi & PAGE_MASK;
+ if (IO_EXTRACT(R_TLB_HI, page_id, tlb_hi) == page_id &&
+ vpn >= start && vpn < end) {
+ *R_TLB_HI = ( IO_FIELD(R_TLB_HI, page_id, INVALID_PAGEID ) |
+ IO_FIELD(R_TLB_HI, vpn, i & 0xf ) );
+
+ *R_TLB_LO = ( IO_STATE(R_TLB_LO, global,no ) |
+ IO_STATE(R_TLB_LO, valid, no ) |
+ IO_STATE(R_TLB_LO, kernel,no ) |
+ IO_STATE(R_TLB_LO, we, no ) |
+ IO_FIELD(R_TLB_LO, pfn, 0 ) );
+ }
+ }
+ local_irq_restore(flags);
+}
+
+/* dump the entire TLB for debug purposes */
+
+#if 0
+void
+dump_tlb_all(void)
+{
+ int i;
+ unsigned long flags;
+
+ printk("TLB dump. LO is: pfn | reserved | global | valid | kernel | we |\n");
+
+ local_save_flags(flags);
+ local_irq_disable();
+ for(i = 0; i < NUM_TLB_ENTRIES; i++) {
+ *R_TLB_SELECT = ( IO_FIELD(R_TLB_SELECT, index, i) );
+ printk("Entry %d: HI 0x%08lx, LO 0x%08lx\n",
+ i, *R_TLB_HI, *R_TLB_LO);
+ }
+ local_irq_restore(flags);
+}
+#endif
+
+/*
+ * Initialize the context related info for a new mm_struct
+ * instance.
+ */
+
+int
+init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+ mm->context.page_id = NO_CONTEXT;
+ return 0;
+}
+
+/* called in schedule() just before actually doing the switch_to */
+
+void
+switch_mm(struct mm_struct *prev, struct mm_struct *next,
+ struct task_struct *tsk)
+{
+ /* make sure we have a context */
+
+ get_mmu_context(next);
+
+ /* remember the pgd for the fault handlers
+ * this is similar to the pgd register in some other CPU's.
+ * we need our own copy of it because current and active_mm
+ * might be invalid at points where we still need to derefer
+ * the pgd.
+ */
+
+ current_pgd = next->pgd;
+
+ /* switch context in the MMU */
+
+ D(printk("switching mmu_context to %d (%p)\n", next->context, next));
+
+ *R_MMU_CONTEXT = IO_FIELD(R_MMU_CONTEXT, page_id, next->context.page_id);
+}
+
diff --git a/arch/cris/arch-v10/output_arch.ld b/arch/cris/arch-v10/output_arch.ld
new file mode 100644
index 00000000000..2f328800699
--- /dev/null
+++ b/arch/cris/arch-v10/output_arch.ld
@@ -0,0 +1,2 @@
+/* At the time of this writing, there's no equivalent ld option. */
+OUTPUT_ARCH (cris)
diff --git a/arch/cris/arch-v10/vmlinux.lds.S b/arch/cris/arch-v10/vmlinux.lds.S
new file mode 100644
index 00000000000..71ba736be8f
--- /dev/null
+++ b/arch/cris/arch-v10/vmlinux.lds.S
@@ -0,0 +1,120 @@
+/* ld script to make the Linux/CRIS kernel
+ * Authors: Bjorn Wesen (bjornw@axis.com)
+ *
+ * It is VERY DANGEROUS to fiddle around with the symbols in this
+ * script. It is for example quite vital that all generated sections
+ * that are used are actually named here, otherwise the linker will
+ * put them at the end, where the init stuff is which is FREED after
+ * the kernel has booted.
+ */
+
+#include <linux/config.h>
+#include <asm-generic/vmlinux.lds.h>
+
+jiffies = jiffies_64;
+SECTIONS
+{
+ . = DRAM_VIRTUAL_BASE;
+ dram_start = .;
+ ibr_start = .;
+ . = . + 0x4000; /* see head.S and pages reserved at the start */
+
+ _text = .; /* Text and read-only data */
+ text_start = .; /* lots of aliases */
+ _stext = .;
+ __stext = .;
+ .text : {
+ *(.text)
+ SCHED_TEXT
+ LOCK_TEXT
+ *(.fixup)
+ *(.text.__*)
+ }
+
+ _etext = . ; /* End of text section */
+ __etext = .;
+
+ . = ALIGN(4); /* Exception table */
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ RODATA
+
+ . = ALIGN (4);
+ ___data_start = . ;
+ __Sdata = . ;
+ .data : { /* Data */
+ *(.data)
+ }
+ __edata = . ; /* End of data section */
+ _edata = . ;
+
+ . = ALIGN(8192); /* init_task and stack, must be aligned */
+ .data.init_task : { *(.data.init_task) }
+
+ . = ALIGN(8192); /* Init code and data */
+ __init_begin = .;
+ .init.text : {
+ _sinittext = .;
+ *(.init.text)
+ _einittext = .;
+ }
+ .init.data : { *(.init.data) }
+ . = ALIGN(16);
+ __setup_start = .;
+ .init.setup : { *(.init.setup) }
+ __setup_end = .;
+ .initcall.init : {
+ __initcall_start = .;
+ *(.initcall1.init);
+ *(.initcall2.init);
+ *(.initcall3.init);
+ *(.initcall4.init);
+ *(.initcall5.init);
+ *(.initcall6.init);
+ *(.initcall7.init);
+ __initcall_end = .;
+ }
+
+ .con_initcall.init : {
+ __con_initcall_start = .;
+ *(.con_initcall.init)
+ __con_initcall_end = .;
+ }
+ SECURITY_INIT
+
+ .init.ramfs : {
+ __initramfs_start = .;
+ *(.init.ramfs)
+ __initramfs_end = .;
+ /* We fill to the next page, so we can discard all init
+ pages without needing to consider what payload might be
+ appended to the kernel image. */
+ FILL (0);
+ . = ALIGN (8192);
+ }
+
+ __vmlinux_end = .; /* last address of the physical file */
+ __init_end = .;
+
+ __data_end = . ; /* Move to _edata ? */
+ __bss_start = .; /* BSS */
+ .bss : {
+ *(COMMON)
+ *(.bss)
+ }
+
+ . = ALIGN (0x20);
+ _end = .;
+ __end = .;
+
+ /* Sections to be discarded */
+ /DISCARD/ : {
+ *(.text.exit)
+ *(.data.exit)
+ *(.exitcall.exit)
+ }
+
+ dram_end = dram_start + CONFIG_ETRAX_DRAM_SIZE*1024*1024;
+}
diff --git a/arch/cris/defconfig b/arch/cris/defconfig
new file mode 100644
index 00000000000..32c9c987dba
--- /dev/null
+++ b/arch/cris/defconfig
@@ -0,0 +1,591 @@
+#
+# Automatically generated make config: don't edit
+#
+CONFIG_MMU=y
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_STANDALONE=y
+CONFIG_BROKEN_ON_SMP=y
+
+#
+# General setup
+#
+CONFIG_SWAP=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_HOTPLUG is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_EMBEDDED=y
+# CONFIG_KALLSYMS is not set
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# General setup
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_ETRAX_CMDLINE="root=/dev/mtdblock3 init=/linuxrc"
+CONFIG_ETRAX_WATCHDOG=y
+CONFIG_ETRAX_WATCHDOG_NICE_DOGGY=y
+CONFIG_ETRAX_FAST_TIMER=y
+# CONFIG_PREEMPT is not set
+
+#
+# Hardware setup
+#
+CONFIG_ETRAX100LX=y
+# CONFIG_ETRAX100LX_V2 is not set
+# CONFIG_SVINTO_SIM is not set
+CONFIG_ETRAX_ARCH_V10=y
+CONFIG_ETRAX_DRAM_SIZE=16
+CONFIG_ETRAX_FLASH_BUSWIDTH=2
+CONFIG_CRIS_LOW_MAP=y
+CONFIG_ETRAX_DRAM_VIRTUAL_BASE=60000000
+CONFIG_ETRAX_PA_LEDS=y
+# CONFIG_ETRAX_PB_LEDS is not set
+# CONFIG_ETRAX_CSP0_LEDS is not set
+# CONFIG_ETRAX_NO_LEDS is not set
+CONFIG_ETRAX_LED1G=2
+CONFIG_ETRAX_LED1R=2
+CONFIG_ETRAX_LED2G=3
+CONFIG_ETRAX_LED2R=3
+CONFIG_ETRAX_LED3G=2
+CONFIG_ETRAX_LED3R=2
+CONFIG_ETRAX_DEBUG_PORT0=y
+# CONFIG_ETRAX_DEBUG_PORT1 is not set
+# CONFIG_ETRAX_DEBUG_PORT2 is not set
+# CONFIG_ETRAX_DEBUG_PORT3 is not set
+# CONFIG_ETRAX_DEBUG_PORT_NULL is not set
+CONFIG_ETRAX_RESCUE_SER0=y
+# CONFIG_ETRAX_RESCUE_SER1 is not set
+# CONFIG_ETRAX_RESCUE_SER2 is not set
+# CONFIG_ETRAX_RESCUE_SER3 is not set
+CONFIG_ETRAX_DEF_R_WAITSTATES=0x95f8
+CONFIG_ETRAX_DEF_R_BUS_CONFIG=0x104
+CONFIG_ETRAX_SDRAM=y
+CONFIG_ETRAX_DEF_R_SDRAM_CONFIG=0x00e03636
+CONFIG_ETRAX_DEF_R_SDRAM_TIMING=0x80008002
+CONFIG_ETRAX_DEF_R_PORT_PA_DIR=0x1d
+CONFIG_ETRAX_DEF_R_PORT_PA_DATA=0xf0
+CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG=0x00
+CONFIG_ETRAX_DEF_R_PORT_PB_DIR=0x1e
+CONFIG_ETRAX_DEF_R_PORT_PB_DATA=0xf3
+# CONFIG_ETRAX_SOFT_SHUTDOWN is not set
+
+#
+# Drivers for built-in interfaces
+#
+CONFIG_ETRAX_ETHERNET=y
+CONFIG_NET_ETHERNET=y
+# CONFIG_ETRAX_NETWORK_LED_ON_WHEN_LINK is not set
+CONFIG_ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY=y
+CONFIG_ETRAX_SERIAL=y
+CONFIG_ETRAX_SERIAL_FAST_TIMER=y
+CONFIG_ETRAX_SERIAL_PORT0=y
+# CONFIG_CONFIG_ETRAX_SERIAL_PORT0_NO_DMA_OUT is not set
+CONFIG_CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT=y
+# CONFIG_CONFIG_ETRAX_SERIAL_PORT0_NO_DMA_IN is not set
+CONFIG_CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN=y
+CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_ON_NONE=y
+# CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_ON_PA is not set
+# CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_ON_PB is not set
+# CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED is not set
+CONFIG_ETRAX_SER0_DTR_ON_PA_BIT=-1
+CONFIG_ETRAX_SER0_RI_ON_PA_BIT=-1
+CONFIG_ETRAX_SER0_DSR_ON_PA_BIT=-1
+CONFIG_ETRAX_SER0_CD_ON_PA_BIT=-1
+CONFIG_ETRAX_SER0_DTR_ON_PB_BIT=-1
+CONFIG_ETRAX_SER0_RI_ON_PB_BIT=-1
+CONFIG_ETRAX_SER0_DSR_ON_PB_BIT=-1
+CONFIG_ETRAX_SER0_CD_ON_PB_BIT=-1
+# CONFIG_ETRAX_SERIAL_PORT1 is not set
+CONFIG_ETRAX_SERIAL_PORT2=y
+# CONFIG_CONFIG_ETRAX_SERIAL_PORT2_NO_DMA_OUT is not set
+CONFIG_CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT=y
+# CONFIG_CONFIG_ETRAX_SERIAL_PORT2_NO_DMA_IN is not set
+CONFIG_CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN=y
+CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_ON_NONE=y
+# CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_ON_PA is not set
+# CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_ON_PB is not set
+# CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED is not set
+CONFIG_ETRAX_SER2_DTR_ON_PA_BIT=-1
+CONFIG_ETRAX_SER2_RI_ON_PA_BIT=-1
+CONFIG_ETRAX_SER2_DSR_ON_PA_BIT=-1
+CONFIG_ETRAX_SER2_CD_ON_PA_BIT=-1
+CONFIG_ETRAX_SER2_DTR_ON_PB_BIT=-1
+CONFIG_ETRAX_SER2_RI_ON_PB_BIT=-1
+CONFIG_ETRAX_SER2_DSR_ON_PB_BIT=-1
+CONFIG_ETRAX_SER2_CD_ON_PB_BIT=-1
+# CONFIG_ETRAX_SERIAL_PORT3 is not set
+# CONFIG_ETRAX_RS485 is not set
+# CONFIG_ETRAX_IDE is not set
+# CONFIG_IDE is not set
+# CONFIG_ETRAX_USB_HOST is not set
+CONFIG_ETRAX_AXISFLASHMAP=y
+CONFIG_ETRAX_PTABLE_SECTOR=65536
+CONFIG_MTD=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_OBSOLETE_CHIPS=y
+CONFIG_MTD_AMDSTD=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CONCAT=y
+# CONFIG_ETRAX_I2C is not set
+CONFIG_ETRAX_GPIO=y
+CONFIG_ETRAX_PA_BUTTON_BITMASK=0x02
+CONFIG_ETRAX_PA_CHANGEABLE_DIR=0x00
+CONFIG_ETRAX_PA_CHANGEABLE_BITS=0xFF
+CONFIG_ETRAX_PB_CHANGEABLE_DIR=0x00
+CONFIG_ETRAX_PB_CHANGEABLE_BITS=0xFF
+# CONFIG_ETRAX_RTC is not set
+
+#
+# Generic Driver Options
+#
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_SHARP is not set
+# CONFIG_MTD_JEDEC is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_PHYSMAP is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+CONFIG_MTD_MTDRAM=y
+CONFIG_MTDRAM_TOTAL_SIZE=0
+CONFIG_MTDRAM_ERASE_SIZE=64
+CONFIG_MTDRAM_ABS_POS=0x0
+# CONFIG_MTD_BLKMTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_INITRD is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+
+#
+# SCSI device support
+#
+# CONFIG_SCSI is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+
+#
+# Networking support
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+# CONFIG_NETLINK_DEV is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_CONNTRACK is not set
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
+# CONFIG_IP_NF_COMPAT_IPFWADM is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_HW_FLOWCONTROL is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+# CONFIG_MII is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Userland interfaces
+#
+
+#
+# Input I/O drivers
+#
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_CT82C710 is not set
+
+#
+# Input Device Drivers
+#
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_QIC02_TAPE is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_FTAPE is not set
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_FAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+# CONFIG_DEVFS_FS is not set
+# CONFIG_DEVPTS_FS_XATTR is not set
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS_FS=y
+CONFIG_JFFS_FS_VERBOSE=0
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+# CONFIG_EXPORTFS is not set
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_INTERMEZZO_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PROFILE is not set
+# CONFIG_ETRAX_KGDB is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_FRAME_POINTER is not set
+
+#
+# Security options
+#
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+# CONFIG_CRC32 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
diff --git a/arch/cris/kernel/Makefile b/arch/cris/kernel/Makefile
new file mode 100644
index 00000000000..1546a0e7404
--- /dev/null
+++ b/arch/cris/kernel/Makefile
@@ -0,0 +1,15 @@
+# $Id: Makefile,v 1.10 2004/05/14 10:18:12 starvik Exp $
+#
+# Makefile for the linux kernel.
+#
+
+extra-y := vmlinux.lds
+
+obj-y := process.o traps.o irq.o ptrace.o setup.o \
+ time.o sys_cris.o semaphore.o
+
+obj-$(CONFIG_MODULES) += crisksyms.o
+obj-$(CONFIG_MODULES) += module.o
+
+clean:
+
diff --git a/arch/cris/kernel/crisksyms.c b/arch/cris/kernel/crisksyms.c
new file mode 100644
index 00000000000..7141bbecd7e
--- /dev/null
+++ b/arch/cris/kernel/crisksyms.c
@@ -0,0 +1,103 @@
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/user.h>
+#include <linux/elfcore.h>
+#include <linux/sched.h>
+#include <linux/in6.h>
+#include <linux/interrupt.h>
+#include <linux/smp_lock.h>
+#include <linux/pm.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/tty.h>
+
+#include <asm/semaphore.h>
+#include <asm/processor.h>
+#include <asm/uaccess.h>
+#include <asm/checksum.h>
+#include <asm/io.h>
+#include <asm/delay.h>
+#include <asm/irq.h>
+#include <asm/pgtable.h>
+#include <asm/fasttimer.h>
+
+extern void dump_thread(struct pt_regs *, struct user *);
+extern unsigned long get_cmos_time(void);
+extern void __Udiv(void);
+extern void __Umod(void);
+extern void __Div(void);
+extern void __Mod(void);
+extern void __ashrdi3(void);
+extern void iounmap(void *addr);
+
+/* Platform dependent support */
+EXPORT_SYMBOL(dump_thread);
+EXPORT_SYMBOL(enable_irq);
+EXPORT_SYMBOL(disable_irq);
+EXPORT_SYMBOL(kernel_thread);
+EXPORT_SYMBOL(get_cmos_time);
+EXPORT_SYMBOL(loops_per_usec);
+
+/* String functions */
+EXPORT_SYMBOL(memcmp);
+EXPORT_SYMBOL(memmove);
+EXPORT_SYMBOL(strpbrk);
+EXPORT_SYMBOL(strstr);
+EXPORT_SYMBOL(strcpy);
+EXPORT_SYMBOL(strchr);
+EXPORT_SYMBOL(strcmp);
+EXPORT_SYMBOL(strlen);
+EXPORT_SYMBOL(strcat);
+EXPORT_SYMBOL(strncat);
+EXPORT_SYMBOL(strncmp);
+EXPORT_SYMBOL(strncpy);
+
+/* Math functions */
+EXPORT_SYMBOL(__Udiv);
+EXPORT_SYMBOL(__Umod);
+EXPORT_SYMBOL(__Div);
+EXPORT_SYMBOL(__Mod);
+EXPORT_SYMBOL(__ashrdi3);
+
+/* Memory functions */
+EXPORT_SYMBOL(__ioremap);
+EXPORT_SYMBOL(iounmap);
+
+/* Semaphore functions */
+EXPORT_SYMBOL(__up);
+EXPORT_SYMBOL(__down);
+EXPORT_SYMBOL(__down_interruptible);
+EXPORT_SYMBOL(__down_trylock);
+
+/* Export shadow registers for the CPU I/O pins */
+EXPORT_SYMBOL(genconfig_shadow);
+EXPORT_SYMBOL(port_pa_data_shadow);
+EXPORT_SYMBOL(port_pa_dir_shadow);
+EXPORT_SYMBOL(port_pb_data_shadow);
+EXPORT_SYMBOL(port_pb_dir_shadow);
+EXPORT_SYMBOL(port_pb_config_shadow);
+EXPORT_SYMBOL(port_g_data_shadow);
+
+/* Userspace access functions */
+EXPORT_SYMBOL(__copy_user_zeroing);
+EXPORT_SYMBOL(__copy_user);
+
+/* Cache flush functions */
+EXPORT_SYMBOL(flush_etrax_cache);
+EXPORT_SYMBOL(prepare_rx_descriptor);
+
+#undef memcpy
+#undef memset
+extern void * memset(void *, int, __kernel_size_t);
+extern void * memcpy(void *, const void *, __kernel_size_t);
+EXPORT_SYMBOL(memcpy);
+EXPORT_SYMBOL(memset);
+
+#ifdef CONFIG_ETRAX_FAST_TIMER
+/* Fast timer functions */
+EXPORT_SYMBOL(fast_timer_list);
+EXPORT_SYMBOL(start_one_shot_timer);
+EXPORT_SYMBOL(del_fast_timer);
+EXPORT_SYMBOL(schedule_usleep);
+#endif
+
diff --git a/arch/cris/kernel/irq.c b/arch/cris/kernel/irq.c
new file mode 100644
index 00000000000..d848b940745
--- /dev/null
+++ b/arch/cris/kernel/irq.c
@@ -0,0 +1,297 @@
+/*
+ *
+ * linux/arch/cris/kernel/irq.c
+ *
+ * Copyright (c) 2000,2001 Axis Communications AB
+ *
+ * Authors: Bjorn Wesen (bjornw@axis.com)
+ *
+ * This file contains the code used by various IRQ handling routines:
+ * asking for different IRQ's should be done through these routines
+ * instead of just grabbing them. Thus setups with different IRQ numbers
+ * shouldn't result in any weird surprises, and installing new handlers
+ * should be easier.
+ *
+ * Notice Linux/CRIS: these routines do not care about SMP
+ *
+ */
+
+/*
+ * IRQ's are in fact implemented a bit like signal handlers for the kernel.
+ * Naturally it's not a 1:1 relation, but there are similarities.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/ptrace.h>
+
+#include <linux/kernel_stat.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/timex.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/init.h>
+#include <linux/seq_file.h>
+#include <linux/errno.h>
+#include <linux/bitops.h>
+
+#include <asm/io.h>
+
+/* Defined in arch specific irq.c */
+extern void arch_setup_irq(int irq);
+extern void arch_free_irq(int irq);
+
+void
+disable_irq(unsigned int irq_nr)
+{
+ unsigned long flags;
+
+ local_save_flags(flags);
+ local_irq_disable();
+ mask_irq(irq_nr);
+ local_irq_restore(flags);
+}
+
+void
+enable_irq(unsigned int irq_nr)
+{
+ unsigned long flags;
+ local_save_flags(flags);
+ local_irq_disable();
+ unmask_irq(irq_nr);
+ local_irq_restore(flags);
+}
+
+unsigned long
+probe_irq_on()
+{
+ return 0;
+}
+
+EXPORT_SYMBOL(probe_irq_on);
+
+int
+probe_irq_off(unsigned long x)
+{
+ return 0;
+}
+
+EXPORT_SYMBOL(probe_irq_off);
+
+/*
+ * Initial irq handlers.
+ */
+
+static struct irqaction *irq_action[NR_IRQS];
+
+int show_interrupts(struct seq_file *p, void *v)
+{
+ int i = *(loff_t *) v;
+ struct irqaction * action;
+ unsigned long flags;
+
+ if (i < NR_IRQS) {
+ local_irq_save(flags);
+ action = irq_action[i];
+ if (!action)
+ goto skip;
+ seq_printf(p, "%2d: %10u %c %s",
+ i, kstat_this_cpu.irqs[i],
+ (action->flags & SA_INTERRUPT) ? '+' : ' ',
+ action->name);
+ for (action = action->next; action; action = action->next) {
+ seq_printf(p, ",%s %s",
+ (action->flags & SA_INTERRUPT) ? " +" : "",
+ action->name);
+ }
+ seq_putc(p, '\n');
+skip:
+ local_irq_restore(flags);
+ }
+ return 0;
+}
+
+/* called by the assembler IRQ entry functions defined in irq.h
+ * to dispatch the interrupts to registred handlers
+ * interrupts are disabled upon entry - depending on if the
+ * interrupt was registred with SA_INTERRUPT or not, interrupts
+ * are re-enabled or not.
+ */
+
+asmlinkage void do_IRQ(int irq, struct pt_regs * regs)
+{
+ struct irqaction *action;
+ int do_random, cpu;
+ int ret, retval = 0;
+
+ cpu = smp_processor_id();
+ irq_enter();
+ kstat_cpu(cpu).irqs[irq - FIRST_IRQ]++;
+ action = irq_action[irq - FIRST_IRQ];
+
+ if (action) {
+ if (!(action->flags & SA_INTERRUPT))
+ local_irq_enable();
+ do_random = 0;
+ do {
+ ret = action->handler(irq, action->dev_id, regs);
+ if (ret == IRQ_HANDLED)
+ do_random |= action->flags;
+ retval |= ret;
+ action = action->next;
+ } while (action);
+
+ if (retval != 1) {
+ if (retval) {
+ printk("irq event %d: bogus retval mask %x\n",
+ irq, retval);
+ } else {
+ printk("irq %d: nobody cared\n", irq);
+ }
+ }
+
+ if (do_random & SA_SAMPLE_RANDOM)
+ add_interrupt_randomness(irq);
+ local_irq_disable();
+ }
+ irq_exit();
+}
+
+/* this function links in a handler into the chain of handlers for the
+ given irq, and if the irq has never been registred, the appropriate
+ handler is entered into the interrupt vector
+*/
+
+int setup_irq(int irq, struct irqaction * new)
+{
+ int shared = 0;
+ struct irqaction *old, **p;
+ unsigned long flags;
+
+ p = irq_action + irq - FIRST_IRQ;
+ if ((old = *p) != NULL) {
+ /* Can't share interrupts unless both agree to */
+ if (!(old->flags & new->flags & SA_SHIRQ))
+ return -EBUSY;
+
+ /* Can't share interrupts unless both are same type */
+ if ((old->flags ^ new->flags) & SA_INTERRUPT)
+ return -EBUSY;
+
+ /* add new interrupt at end of irq queue */
+ do {
+ p = &old->next;
+ old = *p;
+ } while (old);
+ shared = 1;
+ }
+
+ if (new->flags & SA_SAMPLE_RANDOM)
+ rand_initialize_irq(irq);
+
+ local_save_flags(flags);
+ local_irq_disable();
+ *p = new;
+
+ if (!shared) {
+ /* if the irq wasn't registred before, enter it into the vector table
+ and unmask it physically
+ */
+ arch_setup_irq(irq);
+ unmask_irq(irq);
+ }
+
+ local_irq_restore(flags);
+ return 0;
+}
+
+/* this function is called by a driver to register an irq handler
+ Valid flags:
+ SA_INTERRUPT -> it's a fast interrupt, handler called with irq disabled and
+ no signal checking etc is performed upon exit
+ SA_SHIRQ -> the interrupt can be shared between different handlers, the handler
+ is required to check if the irq was "aimed" at it explicitely
+ SA_RANDOM -> the interrupt will add to the random generators entropy
+*/
+
+int request_irq(unsigned int irq,
+ irqreturn_t (*handler)(int, void *, struct pt_regs *),
+ unsigned long irqflags,
+ const char * devname,
+ void *dev_id)
+{
+ int retval;
+ struct irqaction * action;
+
+ if(!handler)
+ return -EINVAL;
+
+ /* allocate and fill in a handler structure and setup the irq */
+
+ action = (struct irqaction *)kmalloc(sizeof(struct irqaction), GFP_KERNEL);
+ if (!action)
+ return -ENOMEM;
+
+ action->handler = handler;
+ action->flags = irqflags;
+ cpus_clear(action->mask);
+ action->name = devname;
+ action->next = NULL;
+ action->dev_id = dev_id;
+
+ retval = setup_irq(irq, action);
+
+ if (retval)
+ kfree(action);
+ return retval;
+}
+
+EXPORT_SYMBOL(request_irq);
+
+void free_irq(unsigned int irq, void *dev_id)
+{
+ struct irqaction * action, **p;
+ unsigned long flags;
+
+ if (irq >= NR_IRQS) {
+ printk("Trying to free IRQ%d\n",irq);
+ return;
+ }
+ for (p = irq - FIRST_IRQ + irq_action; (action = *p) != NULL; p = &action->next) {
+ if (action->dev_id != dev_id)
+ continue;
+
+ /* Found it - now free it */
+ local_save_flags(flags);
+ local_irq_disable();
+ *p = action->next;
+ if (!irq_action[irq - FIRST_IRQ]) {
+ mask_irq(irq);
+ arch_free_irq(irq);
+ }
+ local_irq_restore(flags);
+ kfree(action);
+ return;
+ }
+ printk("Trying to free free IRQ%d\n",irq);
+}
+
+EXPORT_SYMBOL(free_irq);
+
+void weird_irq(void)
+{
+ local_irq_disable();
+ printk("weird irq\n");
+ while(1);
+}
+
+#if defined(CONFIG_PROC_FS) && defined(CONFIG_SYSCTL)
+/* Used by other archs to show/control IRQ steering during SMP */
+void __init
+init_irq_proc(void)
+{
+}
+#endif
diff --git a/arch/cris/kernel/module.c b/arch/cris/kernel/module.c
new file mode 100644
index 00000000000..f1d3e784f30
--- /dev/null
+++ b/arch/cris/kernel/module.c
@@ -0,0 +1,121 @@
+/* Kernel module help for i386.
+ Copyright (C) 2001 Rusty Russell.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+#include <linux/moduleloader.h>
+#include <linux/elf.h>
+#include <linux/vmalloc.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+
+#if 0
+#define DEBUGP printk
+#else
+#define DEBUGP(fmt , ...)
+#endif
+
+void *module_alloc(unsigned long size)
+{
+ if (size == 0)
+ return NULL;
+ return vmalloc(size);
+}
+
+
+/* Free memory returned from module_alloc */
+void module_free(struct module *mod, void *module_region)
+{
+ vfree(module_region);
+ /* FIXME: If module_region == mod->init_region, trim exception
+ table entries. */
+}
+
+/* We don't need anything special. */
+int module_frob_arch_sections(Elf_Ehdr *hdr,
+ Elf_Shdr *sechdrs,
+ char *secstrings,
+ struct module *mod)
+{
+ return 0;
+}
+
+int apply_relocate(Elf32_Shdr *sechdrs,
+ const char *strtab,
+ unsigned int symindex,
+ unsigned int relsec,
+ struct module *me)
+{
+ unsigned int i;
+ Elf32_Rel *rel = (void *)sechdrs[relsec].sh_addr;
+ Elf32_Sym *sym;
+ uint32_t *location;
+
+ DEBUGP("Applying relocate section %u to %u\n", relsec,
+ sechdrs[relsec].sh_info);
+ for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
+ /* This is where to make the change */
+ location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_offset
+ + rel[i].r_offset;
+ /* This is the symbol it is referring to. Note that all
+ undefined symbols have been resolved. */
+ sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
+ + ELF32_R_SYM(rel[i].r_info);
+
+ /* We add the value into the location given */
+ *location += sym->st_value;
+ }
+ return 0;
+}
+
+int apply_relocate_add(Elf32_Shdr *sechdrs,
+ const char *strtab,
+ unsigned int symindex,
+ unsigned int relsec,
+ struct module *me)
+{
+ unsigned int i;
+ Elf32_Rela *rela = (void *)sechdrs[relsec].sh_addr;
+
+ DEBUGP ("Applying relocate section %u to %u\n", relsec,
+ sechdrs[relsec].sh_info);
+
+ for (i = 0; i < sechdrs[relsec].sh_size / sizeof (*rela); i++) {
+ /* This is where to make the change */
+ uint32_t *loc
+ = ((void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
+ + rela[i].r_offset);
+ /* This is the symbol it is referring to. Note that all
+ undefined symbols have been resolved. */
+ Elf32_Sym *sym
+ = ((Elf32_Sym *)sechdrs[symindex].sh_addr
+ + ELF32_R_SYM (rela[i].r_info));
+ *loc = sym->st_value + rela[i].r_addend;
+ }
+
+ return 0;
+}
+
+int module_finalize(const Elf_Ehdr *hdr,
+ const Elf_Shdr *sechdrs,
+ struct module *me)
+{
+ return 0;
+}
+
+void module_arch_cleanup(struct module *mod)
+{
+}
diff --git a/arch/cris/kernel/process.c b/arch/cris/kernel/process.c
new file mode 100644
index 00000000000..9f7cad7c784
--- /dev/null
+++ b/arch/cris/kernel/process.c
@@ -0,0 +1,280 @@
+/* $Id: process.c,v 1.17 2004/04/05 13:53:48 starvik Exp $
+ *
+ * linux/arch/cris/kernel/process.c
+ *
+ * Copyright (C) 1995 Linus Torvalds
+ * Copyright (C) 2000-2002 Axis Communications AB
+ *
+ * Authors: Bjorn Wesen (bjornw@axis.com)
+ *
+ * $Log: process.c,v $
+ * Revision 1.17 2004/04/05 13:53:48 starvik
+ * Merge of Linux 2.6.5
+ *
+ * Revision 1.16 2003/10/27 08:04:33 starvik
+ * Merge of Linux 2.6.0-test9
+ *
+ * Revision 1.15 2003/09/11 07:29:52 starvik
+ * Merge of Linux 2.6.0-test5
+ *
+ * Revision 1.14 2003/06/10 10:21:12 johana
+ * Moved thread_saved_pc() from arch/cris/kernel/process.c to
+ * subarch specific process.c. arch-v32 has an erp, no irp.
+ *
+ * Revision 1.13 2003/04/09 05:20:47 starvik
+ * Merge of Linux 2.5.67
+ *
+ * Revision 1.12 2002/12/11 15:41:11 starvik
+ * Extracted v10 (ETRAX 100LX) specific stuff to arch/cris/arch-v10/kernel
+ *
+ * Revision 1.11 2002/12/10 09:00:10 starvik
+ * Merge of Linux 2.5.51
+ *
+ * Revision 1.10 2002/11/27 08:42:34 starvik
+ * Argument to user_regs() is thread_info*
+ *
+ * Revision 1.9 2002/11/26 09:44:21 starvik
+ * New threads exits through ret_from_fork (necessary for preemptive scheduling)
+ *
+ * Revision 1.8 2002/11/19 14:35:24 starvik
+ * Changes from linux 2.4
+ * Changed struct initializer syntax to the currently prefered notation
+ *
+ * Revision 1.7 2002/11/18 07:39:42 starvik
+ * thread_saved_pc moved here from processor.h
+ *
+ * Revision 1.6 2002/11/14 06:51:27 starvik
+ * Made cpu_idle more similar with other archs
+ * init_task_union -> init_thread_union
+ * Updated for new interrupt macros
+ * sys_clone and do_fork have a new argument, user_tid
+ *
+ * Revision 1.5 2002/11/05 06:45:11 starvik
+ * Merge of Linux 2.5.45
+ *
+ * Revision 1.4 2002/02/05 15:37:44 bjornw
+ * Need init_task.h
+ *
+ * Revision 1.3 2002/01/21 15:22:49 bjornw
+ * current->counter is gone
+ *
+ * Revision 1.22 2001/11/13 09:40:43 orjanf
+ * Added dump_fpu (needed for core dumps).
+ *
+ * Revision 1.21 2001/11/12 18:26:21 pkj
+ * Fixed compiler warnings.
+ *
+ * Revision 1.20 2001/10/03 08:21:39 jonashg
+ * cause_of_death does not exist if CONFIG_SVINTO_SIM is defined.
+ *
+ * Revision 1.19 2001/09/26 11:52:54 bjornw
+ * INIT_MMAP is gone in 2.4.10
+ *
+ * Revision 1.18 2001/08/21 21:43:51 hp
+ * Move last watchdog fix inside #ifdef CONFIG_ETRAX_WATCHDOG
+ *
+ * Revision 1.17 2001/08/21 13:48:01 jonashg
+ * Added fix by HP to avoid oops when doing a hard_reset_now.
+ *
+ * Revision 1.16 2001/06/21 02:00:40 hp
+ * * entry.S: Include asm/unistd.h.
+ * (_sys_call_table): Use section .rodata, not .data.
+ * (_kernel_thread): Move from...
+ * * process.c: ... here.
+ * * entryoffsets.c (VAL): Break out from...
+ * (OF): Use VAL.
+ * (LCLONE_VM): New asmified value from CLONE_VM.
+ *
+ * Revision 1.15 2001/06/20 16:31:57 hp
+ * Add comments to describe empty functions according to review.
+ *
+ * Revision 1.14 2001/05/29 11:27:59 markusl
+ * Fixed so that hard_reset_now will do reset even if watchdog wasn't enabled
+ *
+ * Revision 1.13 2001/03/20 19:44:06 bjornw
+ * Use the 7th syscall argument for regs instead of current_regs
+ *
+ */
+
+/*
+ * This file handles the architecture-dependent parts of process handling..
+ */
+
+#include <asm/atomic.h>
+#include <asm/pgtable.h>
+#include <asm/uaccess.h>
+#include <asm/irq.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/fs_struct.h>
+#include <linux/init_task.h>
+#include <linux/sched.h>
+#include <linux/fs.h>
+#include <linux/user.h>
+#include <linux/elfcore.h>
+#include <linux/mqueue.h>
+
+//#define DEBUG
+
+/*
+ * Initial task structure. Make this a per-architecture thing,
+ * because different architectures tend to have different
+ * alignment requirements and potentially different initial
+ * setup.
+ */
+
+static struct fs_struct init_fs = INIT_FS;
+static struct files_struct init_files = INIT_FILES;
+static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
+static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
+struct mm_struct init_mm = INIT_MM(init_mm);
+
+EXPORT_SYMBOL(init_mm);
+
+/*
+ * Initial thread structure.
+ *
+ * We need to make sure that this is 8192-byte aligned due to the
+ * way process stacks are handled. This is done by having a special
+ * "init_task" linker map entry..
+ */
+union thread_union init_thread_union
+ __attribute__((__section__(".data.init_task"))) =
+ { INIT_THREAD_INFO(init_task) };
+
+/*
+ * Initial task structure.
+ *
+ * All other task structs will be allocated on slabs in fork.c
+ */
+struct task_struct init_task = INIT_TASK(init_task);
+
+EXPORT_SYMBOL(init_task);
+
+/*
+ * The hlt_counter, disable_hlt and enable_hlt is just here as a hook if
+ * there would ever be a halt sequence (for power save when idle) with
+ * some largish delay when halting or resuming *and* a driver that can't
+ * afford that delay. The hlt_counter would then be checked before
+ * executing the halt sequence, and the driver marks the unhaltable
+ * region by enable_hlt/disable_hlt.
+ */
+
+static int hlt_counter=0;
+
+void disable_hlt(void)
+{
+ hlt_counter++;
+}
+
+EXPORT_SYMBOL(disable_hlt);
+
+void enable_hlt(void)
+{
+ hlt_counter--;
+}
+
+EXPORT_SYMBOL(enable_hlt);
+
+/*
+ * The following aren't currently used.
+ */
+void (*pm_idle)(void);
+
+extern void default_idle(void);
+
+/*
+ * The idle thread. There's no useful work to be
+ * done, so just try to conserve power and have a
+ * low exit latency (ie sit in a loop waiting for
+ * somebody to say that they'd like to reschedule)
+ */
+void cpu_idle (void)
+{
+ /* endless idle loop with no priority at all */
+ while (1) {
+ while (!need_resched()) {
+ void (*idle)(void) = pm_idle;
+
+ if (!idle)
+ idle = default_idle;
+
+ idle();
+ }
+ schedule();
+ }
+
+}
+
+void hard_reset_now (void);
+
+void machine_restart(void)
+{
+ hard_reset_now();
+}
+
+EXPORT_SYMBOL(machine_restart);
+
+/*
+ * Similar to machine_power_off, but don't shut off power. Add code
+ * here to freeze the system for e.g. post-mortem debug purpose when
+ * possible. This halt has nothing to do with the idle halt.
+ */
+
+void machine_halt(void)
+{
+}
+
+EXPORT_SYMBOL(machine_halt);
+
+/* If or when software power-off is implemented, add code here. */
+
+void machine_power_off(void)
+{
+}
+
+EXPORT_SYMBOL(machine_power_off);
+
+/*
+ * When a process does an "exec", machine state like FPU and debug
+ * registers need to be reset. This is a hook function for that.
+ * Currently we don't have any such state to reset, so this is empty.
+ */
+
+void flush_thread(void)
+{
+}
+
+/*
+ * fill in the user structure for a core dump..
+ */
+void dump_thread(struct pt_regs * regs, struct user * dump)
+{
+#if 0
+ int i;
+
+ /* changed the size calculations - should hopefully work better. lbt */
+ dump->magic = CMAGIC;
+ dump->start_code = 0;
+ dump->start_stack = regs->esp & ~(PAGE_SIZE - 1);
+ dump->u_tsize = ((unsigned long) current->mm->end_code) >> PAGE_SHIFT;
+ dump->u_dsize = ((unsigned long) (current->mm->brk + (PAGE_SIZE-1))) >> PAGE_SHIFT;
+ dump->u_dsize -= dump->u_tsize;
+ dump->u_ssize = 0;
+ for (i = 0; i < 8; i++)
+ dump->u_debugreg[i] = current->debugreg[i];
+
+ if (dump->start_stack < TASK_SIZE)
+ dump->u_ssize = ((unsigned long) (TASK_SIZE - dump->start_stack)) >> PAGE_SHIFT;
+
+ dump->regs = *regs;
+
+ dump->u_fpvalid = dump_fpu (regs, &dump->i387);
+#endif
+}
+
+/* Fill in the fpu structure for a core dump. */
+int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpu)
+{
+ return 0;
+}
diff --git a/arch/cris/kernel/ptrace.c b/arch/cris/kernel/ptrace.c
new file mode 100644
index 00000000000..e85a2fdd9ac
--- /dev/null
+++ b/arch/cris/kernel/ptrace.c
@@ -0,0 +1,119 @@
+/*
+ * linux/arch/cris/kernel/ptrace.c
+ *
+ * Parts taken from the m68k port.
+ *
+ * Copyright (c) 2000, 2001, 2002 Axis Communications AB
+ *
+ * Authors: Bjorn Wesen
+ *
+ * $Log: ptrace.c,v $
+ * Revision 1.9 2003/07/04 12:56:11 tobiasa
+ * Moved arch-specific code to arch-specific files.
+ *
+ * Revision 1.8 2003/04/09 05:20:47 starvik
+ * Merge of Linux 2.5.67
+ *
+ * Revision 1.7 2002/11/27 08:42:34 starvik
+ * Argument to user_regs() is thread_info*
+ *
+ * Revision 1.6 2002/11/20 11:56:11 starvik
+ * Merge of Linux 2.5.48
+ *
+ * Revision 1.5 2002/11/18 07:41:19 starvik
+ * Removed warning
+ *
+ * Revision 1.4 2002/11/11 12:47:28 starvik
+ * SYSCALL_TRACE has been moved to thread flags
+ *
+ * Revision 1.3 2002/02/05 15:37:18 bjornw
+ * * Add do_notify_resume (replaces do_signal in the callchain)
+ * * syscall_trace is now do_syscall_trace
+ * * current->ptrace flag PT_TRACESYS -> PT_SYSCALLTRACE
+ * * Keep track of the current->work.syscall_trace counter
+ *
+ * Revision 1.2 2001/12/18 13:35:20 bjornw
+ * Applied the 2.4.13->2.4.16 CRIS patch to 2.5.1 (is a copy of 2.4.15).
+ *
+ * Revision 1.8 2001/11/12 18:26:21 pkj
+ * Fixed compiler warnings.
+ *
+ * Revision 1.7 2001/09/26 11:53:49 bjornw
+ * PTRACE_DETACH works more simple in 2.4.10
+ *
+ * Revision 1.6 2001/07/25 16:08:47 bjornw
+ * PTRACE_ATTACH bulk moved into arch-independent code in 2.4.7
+ *
+ * Revision 1.5 2001/03/26 14:24:28 orjanf
+ * * Changed loop condition.
+ * * Added comment documenting non-standard ptrace behaviour.
+ *
+ * Revision 1.4 2001/03/20 19:44:41 bjornw
+ * Use the user_regs macro instead of thread.esp0
+ *
+ * Revision 1.3 2000/12/18 23:45:25 bjornw
+ * Linux/CRIS first version
+ *
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/user.h>
+
+#include <asm/uaccess.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/processor.h>
+
+/*
+ * Get contents of register REGNO in task TASK.
+ */
+inline long get_reg(struct task_struct *task, unsigned int regno)
+{
+ /* USP is a special case, it's not in the pt_regs struct but
+ * in the tasks thread struct
+ */
+
+ if (regno == PT_USP)
+ return task->thread.usp;
+ else if (regno < PT_MAX)
+ return ((unsigned long *)user_regs(task->thread_info))[regno];
+ else
+ return 0;
+}
+
+/*
+ * Write contents of register REGNO in task TASK.
+ */
+inline int put_reg(struct task_struct *task, unsigned int regno,
+ unsigned long data)
+{
+ if (regno == PT_USP)
+ task->thread.usp = data;
+ else if (regno < PT_MAX)
+ ((unsigned long *)user_regs(task->thread_info))[regno] = data;
+ else
+ return -1;
+ return 0;
+}
+
+/* notification of userspace execution resumption
+ * - triggered by current->work.notify_resume
+ */
+extern int do_signal(int canrestart, sigset_t *oldset, struct pt_regs *regs);
+
+
+void do_notify_resume(int canrestart, sigset_t *oldset, struct pt_regs *regs,
+ __u32 thread_info_flags )
+{
+ /* deal with pending signal delivery */
+ if (thread_info_flags & _TIF_SIGPENDING)
+ do_signal(canrestart,oldset,regs);
+}
diff --git a/arch/cris/kernel/semaphore.c b/arch/cris/kernel/semaphore.c
new file mode 100644
index 00000000000..b884263d3cd
--- /dev/null
+++ b/arch/cris/kernel/semaphore.c
@@ -0,0 +1,130 @@
+/*
+ * Generic semaphore code. Buyer beware. Do your own
+ * specific changes in <asm/semaphore-helper.h>
+ */
+
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <asm/semaphore-helper.h>
+
+/*
+ * Semaphores are implemented using a two-way counter:
+ * The "count" variable is decremented for each process
+ * that tries to sleep, while the "waking" variable is
+ * incremented when the "up()" code goes to wake up waiting
+ * processes.
+ *
+ * Notably, the inline "up()" and "down()" functions can
+ * efficiently test if they need to do any extra work (up
+ * needs to do something only if count was negative before
+ * the increment operation.
+ *
+ * waking_non_zero() (from asm/semaphore.h) must execute
+ * atomically.
+ *
+ * When __up() is called, the count was negative before
+ * incrementing it, and we need to wake up somebody.
+ *
+ * This routine adds one to the count of processes that need to
+ * wake up and exit. ALL waiting processes actually wake up but
+ * only the one that gets to the "waking" field first will gate
+ * through and acquire the semaphore. The others will go back
+ * to sleep.
+ *
+ * Note that these functions are only called when there is
+ * contention on the lock, and as such all this is the
+ * "non-critical" part of the whole semaphore business. The
+ * critical part is the inline stuff in <asm/semaphore.h>
+ * where we want to avoid any extra jumps and calls.
+ */
+void __up(struct semaphore *sem)
+{
+ wake_one_more(sem);
+ wake_up(&sem->wait);
+}
+
+/*
+ * Perform the "down" function. Return zero for semaphore acquired,
+ * return negative for signalled out of the function.
+ *
+ * If called from __down, the return is ignored and the wait loop is
+ * not interruptible. This means that a task waiting on a semaphore
+ * using "down()" cannot be killed until someone does an "up()" on
+ * the semaphore.
+ *
+ * If called from __down_interruptible, the return value gets checked
+ * upon return. If the return value is negative then the task continues
+ * with the negative value in the return register (it can be tested by
+ * the caller).
+ *
+ * Either form may be used in conjunction with "up()".
+ *
+ */
+
+#define DOWN_VAR \
+ struct task_struct *tsk = current; \
+ wait_queue_t wait; \
+ init_waitqueue_entry(&wait, tsk);
+
+#define DOWN_HEAD(task_state) \
+ \
+ \
+ tsk->state = (task_state); \
+ add_wait_queue(&sem->wait, &wait); \
+ \
+ /* \
+ * Ok, we're set up. sem->count is known to be less than zero \
+ * so we must wait. \
+ * \
+ * We can let go the lock for purposes of waiting. \
+ * We re-acquire it after awaking so as to protect \
+ * all semaphore operations. \
+ * \
+ * If "up()" is called before we call waking_non_zero() then \
+ * we will catch it right away. If it is called later then \
+ * we will have to go through a wakeup cycle to catch it. \
+ * \
+ * Multiple waiters contend for the semaphore lock to see \
+ * who gets to gate through and who has to wait some more. \
+ */ \
+ for (;;) {
+
+#define DOWN_TAIL(task_state) \
+ tsk->state = (task_state); \
+ } \
+ tsk->state = TASK_RUNNING; \
+ remove_wait_queue(&sem->wait, &wait);
+
+void __sched __down(struct semaphore * sem)
+{
+ DOWN_VAR
+ DOWN_HEAD(TASK_UNINTERRUPTIBLE)
+ if (waking_non_zero(sem))
+ break;
+ schedule();
+ DOWN_TAIL(TASK_UNINTERRUPTIBLE)
+}
+
+int __sched __down_interruptible(struct semaphore * sem)
+{
+ int ret = 0;
+ DOWN_VAR
+ DOWN_HEAD(TASK_INTERRUPTIBLE)
+
+ ret = waking_non_zero_interruptible(sem, tsk);
+ if (ret)
+ {
+ if (ret == 1)
+ /* ret != 0 only if we get interrupted -arca */
+ ret = 0;
+ break;
+ }
+ schedule();
+ DOWN_TAIL(TASK_INTERRUPTIBLE)
+ return ret;
+}
+
+int __down_trylock(struct semaphore * sem)
+{
+ return waking_non_zero_trylock(sem);
+}
diff --git a/arch/cris/kernel/setup.c b/arch/cris/kernel/setup.c
new file mode 100644
index 00000000000..6ec2671078b
--- /dev/null
+++ b/arch/cris/kernel/setup.c
@@ -0,0 +1,193 @@
+/*
+ *
+ * linux/arch/cris/kernel/setup.c
+ *
+ * Copyright (C) 1995 Linus Torvalds
+ * Copyright (c) 2001 Axis Communications AB
+ */
+
+/*
+ * This file handles the architecture-dependent parts of initialization
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/bootmem.h>
+#include <asm/pgtable.h>
+#include <linux/seq_file.h>
+#include <linux/tty.h>
+
+#include <asm/setup.h>
+
+/*
+ * Setup options
+ */
+struct drive_info_struct { char dummy[32]; } drive_info;
+struct screen_info screen_info;
+
+extern int root_mountflags;
+extern char _etext, _edata, _end;
+
+static char command_line[COMMAND_LINE_SIZE] = { 0, };
+
+extern const unsigned long text_start, edata; /* set by the linker script */
+extern unsigned long dram_start, dram_end;
+
+extern unsigned long romfs_start, romfs_length, romfs_in_flash; /* from head.S */
+
+extern void show_etrax_copyright(void); /* arch-vX/kernel/setup.c */
+
+/* This mainly sets up the memory area, and can be really confusing.
+ *
+ * The physical DRAM is virtually mapped into dram_start to dram_end
+ * (usually c0000000 to c0000000 + DRAM size). The physical address is
+ * given by the macro __pa().
+ *
+ * In this DRAM, the kernel code and data is loaded, in the beginning.
+ * It really starts at c0004000 to make room for some special pages -
+ * the start address is text_start. The kernel data ends at _end. After
+ * this the ROM filesystem is appended (if there is any).
+ *
+ * Between this address and dram_end, we have RAM pages usable to the
+ * boot code and the system.
+ *
+ */
+
+void __init
+setup_arch(char **cmdline_p)
+{
+ extern void init_etrax_debug(void);
+ unsigned long bootmap_size;
+ unsigned long start_pfn, max_pfn;
+ unsigned long memory_start;
+
+ /* register an initial console printing routine for printk's */
+
+ init_etrax_debug();
+
+ /* we should really poll for DRAM size! */
+
+ high_memory = &dram_end;
+
+ if(romfs_in_flash || !romfs_length) {
+ /* if we have the romfs in flash, or if there is no rom filesystem,
+ * our free area starts directly after the BSS
+ */
+ memory_start = (unsigned long) &_end;
+ } else {
+ /* otherwise the free area starts after the ROM filesystem */
+ printk("ROM fs in RAM, size %lu bytes\n", romfs_length);
+ memory_start = romfs_start + romfs_length;
+ }
+
+ /* process 1's initial memory region is the kernel code/data */
+
+ init_mm.start_code = (unsigned long) &text_start;
+ init_mm.end_code = (unsigned long) &_etext;
+ init_mm.end_data = (unsigned long) &_edata;
+ init_mm.brk = (unsigned long) &_end;
+
+#define PFN_UP(x) (((x) + PAGE_SIZE-1) >> PAGE_SHIFT)
+#define PFN_DOWN(x) ((x) >> PAGE_SHIFT)
+#define PFN_PHYS(x) ((x) << PAGE_SHIFT)
+
+ /* min_low_pfn points to the start of DRAM, start_pfn points
+ * to the first DRAM pages after the kernel, and max_low_pfn
+ * to the end of DRAM.
+ */
+
+ /*
+ * partially used pages are not usable - thus
+ * we are rounding upwards:
+ */
+
+ start_pfn = PFN_UP(memory_start); /* usually c0000000 + kernel + romfs */
+ max_pfn = PFN_DOWN((unsigned long)high_memory); /* usually c0000000 + dram size */
+
+ /*
+ * Initialize the boot-time allocator (start, end)
+ *
+ * We give it access to all our DRAM, but we could as well just have
+ * given it a small slice. No point in doing that though, unless we
+ * have non-contiguous memory and want the boot-stuff to be in, say,
+ * the smallest area.
+ *
+ * It will put a bitmap of the allocated pages in the beginning
+ * of the range we give it, but it won't mark the bitmaps pages
+ * as reserved. We have to do that ourselves below.
+ *
+ * We need to use init_bootmem_node instead of init_bootmem
+ * because our map starts at a quite high address (min_low_pfn).
+ */
+
+ max_low_pfn = max_pfn;
+ min_low_pfn = PAGE_OFFSET >> PAGE_SHIFT;
+
+ bootmap_size = init_bootmem_node(NODE_DATA(0), start_pfn,
+ min_low_pfn,
+ max_low_pfn);
+
+ /* And free all memory not belonging to the kernel (addr, size) */
+
+ free_bootmem(PFN_PHYS(start_pfn), PFN_PHYS(max_pfn - start_pfn));
+
+ /*
+ * Reserve the bootmem bitmap itself as well. We do this in two
+ * steps (first step was init_bootmem()) because this catches
+ * the (very unlikely) case of us accidentally initializing the
+ * bootmem allocator with an invalid RAM area.
+ *
+ * Arguments are start, size
+ */
+
+ reserve_bootmem(PFN_PHYS(start_pfn), bootmap_size);
+
+ /* paging_init() sets up the MMU and marks all pages as reserved */
+
+ paging_init();
+
+ /* We don't use a command line yet, so just re-initialize it without
+ saving anything that might be there. */
+
+ *cmdline_p = command_line;
+
+#ifdef CONFIG_ETRAX_CMDLINE
+ strlcpy(command_line, CONFIG_ETRAX_CMDLINE, COMMAND_LINE_SIZE);
+ command_line[COMMAND_LINE_SIZE - 1] = '\0';
+
+ /* Save command line for future references. */
+ memcpy(saved_command_line, command_line, COMMAND_LINE_SIZE);
+ saved_command_line[COMMAND_LINE_SIZE - 1] = '\0';
+#endif
+
+ /* give credit for the CRIS port */
+ show_etrax_copyright();
+}
+
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+ /* We only got one CPU... */
+ return *pos < 1 ? (void *)1 : NULL;
+}
+
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+ ++*pos;
+ return NULL;
+}
+
+static void c_stop(struct seq_file *m, void *v)
+{
+}
+
+extern int show_cpuinfo(struct seq_file *m, void *v);
+
+struct seq_operations cpuinfo_op = {
+ .start = c_start,
+ .next = c_next,
+ .stop = c_stop,
+ .show = show_cpuinfo,
+};
+
+
diff --git a/arch/cris/kernel/sys_cris.c b/arch/cris/kernel/sys_cris.c
new file mode 100644
index 00000000000..0aa0e0ebb3a
--- /dev/null
+++ b/arch/cris/kernel/sys_cris.c
@@ -0,0 +1,174 @@
+/* $Id: sys_cris.c,v 1.6 2004/03/11 11:38:40 starvik Exp $
+ *
+ * linux/arch/cris/kernel/sys_cris.c
+ *
+ * This file contains various random system calls that
+ * have a non-standard calling sequence on some platforms.
+ * Since we don't have to do any backwards compatibility, our
+ * versions are done in the most "normal" way possible.
+ *
+ */
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/syscalls.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/sem.h>
+#include <linux/msg.h>
+#include <linux/shm.h>
+#include <linux/stat.h>
+#include <linux/mman.h>
+#include <linux/file.h>
+
+#include <asm/uaccess.h>
+#include <asm/ipc.h>
+#include <asm/segment.h>
+
+/*
+ * sys_pipe() is the normal C calling standard for creating
+ * a pipe. It's not the way Unix traditionally does this, though.
+ */
+asmlinkage int sys_pipe(unsigned long __user * fildes)
+{
+ int fd[2];
+ int error;
+
+ lock_kernel();
+ error = do_pipe(fd);
+ unlock_kernel();
+ if (!error) {
+ if (copy_to_user(fildes, fd, 2*sizeof(int)))
+ error = -EFAULT;
+ }
+ return error;
+}
+
+/* common code for old and new mmaps */
+static inline long
+do_mmap2(unsigned long addr, unsigned long len, unsigned long prot,
+ unsigned long flags, unsigned long fd, unsigned long pgoff)
+{
+ int error = -EBADF;
+ struct file * file = NULL;
+
+ flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
+ if (!(flags & MAP_ANONYMOUS)) {
+ file = fget(fd);
+ if (!file)
+ goto out;
+ }
+
+ down_write(&current->mm->mmap_sem);
+ error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
+ up_write(&current->mm->mmap_sem);
+
+ if (file)
+ fput(file);
+out:
+ return error;
+}
+
+asmlinkage unsigned long old_mmap(unsigned long __user *args)
+{
+ unsigned long buffer[6];
+ int err = -EFAULT;
+
+ if (copy_from_user(&buffer, args, sizeof(buffer)))
+ goto out;
+
+ err = -EINVAL;
+ if (buffer[5] & ~PAGE_MASK) /* verify that offset is on page boundary */
+ goto out;
+
+ err = do_mmap2(buffer[0], buffer[1], buffer[2], buffer[3],
+ buffer[4], buffer[5] >> PAGE_SHIFT);
+out:
+ return err;
+}
+
+asmlinkage long
+sys_mmap2(unsigned long addr, unsigned long len, unsigned long prot,
+ unsigned long flags, unsigned long fd, unsigned long pgoff)
+{
+ return do_mmap2(addr, len, prot, flags, fd, pgoff);
+}
+
+/*
+ * sys_ipc() is the de-multiplexer for the SysV IPC calls..
+ *
+ * This is really horribly ugly. (same as arch/i386)
+ */
+
+asmlinkage int sys_ipc (uint call, int first, int second,
+ int third, void __user *ptr, long fifth)
+{
+ int version, ret;
+
+ version = call >> 16; /* hack for backward compatibility */
+ call &= 0xffff;
+
+ switch (call) {
+ case SEMOP:
+ return sys_semtimedop (first, (struct sembuf __user *)ptr, second, NULL);
+ case SEMTIMEDOP:
+ return sys_semtimedop(first, (struct sembuf __user *)ptr, second,
+ (const struct timespec __user *)fifth);
+
+ case SEMGET:
+ return sys_semget (first, second, third);
+ case SEMCTL: {
+ union semun fourth;
+ if (!ptr)
+ return -EINVAL;
+ if (get_user(fourth.__pad, (void * __user *) ptr))
+ return -EFAULT;
+ return sys_semctl (first, second, third, fourth);
+ }
+
+ case MSGSND:
+ return sys_msgsnd (first, (struct msgbuf __user *) ptr,
+ second, third);
+ case MSGRCV:
+ switch (version) {
+ case 0: {
+ struct ipc_kludge tmp;
+ if (!ptr)
+ return -EINVAL;
+
+ if (copy_from_user(&tmp,
+ (struct ipc_kludge __user *) ptr,
+ sizeof (tmp)))
+ return -EFAULT;
+ return sys_msgrcv (first, tmp.msgp, second,
+ tmp.msgtyp, third);
+ }
+ default:
+ return sys_msgrcv (first,
+ (struct msgbuf __user *) ptr,
+ second, fifth, third);
+ }
+ case MSGGET:
+ return sys_msgget ((key_t) first, second);
+ case MSGCTL:
+ return sys_msgctl (first, second, (struct msqid_ds __user *) ptr);
+
+ case SHMAT: {
+ ulong raddr;
+ ret = do_shmat (first, (char __user *) ptr, second, &raddr);
+ if (ret)
+ return ret;
+ return put_user (raddr, (ulong __user *) third);
+ }
+ case SHMDT:
+ return sys_shmdt ((char __user *)ptr);
+ case SHMGET:
+ return sys_shmget (first, second, third);
+ case SHMCTL:
+ return sys_shmctl (first, second,
+ (struct shmid_ds __user *) ptr);
+ default:
+ return -ENOSYS;
+ }
+}
diff --git a/arch/cris/kernel/time.c b/arch/cris/kernel/time.c
new file mode 100644
index 00000000000..6c28b0e7f7b
--- /dev/null
+++ b/arch/cris/kernel/time.c
@@ -0,0 +1,232 @@
+/* $Id: time.c,v 1.14 2004/06/01 05:38:11 starvik Exp $
+ *
+ * linux/arch/cris/kernel/time.c
+ *
+ * Copyright (C) 1991, 1992, 1995 Linus Torvalds
+ * Copyright (C) 1999, 2000, 2001 Axis Communications AB
+ *
+ * 1994-07-02 Alan Modra
+ * fixed set_rtc_mmss, fixed time.year for >= 2000, new mktime
+ * 1995-03-26 Markus Kuhn
+ * fixed 500 ms bug at call to set_rtc_mmss, fixed DS12887
+ * precision CMOS clock update
+ * 1996-05-03 Ingo Molnar
+ * fixed time warps in do_[slow|fast]_gettimeoffset()
+ * 1997-09-10 Updated NTP code according to technical memorandum Jan '96
+ * "A Kernel Model for Precision Timekeeping" by Dave Mills
+ *
+ * Linux/CRIS specific code:
+ *
+ * Authors: Bjorn Wesen
+ * Johan Adolfsson
+ *
+ */
+
+#include <asm/rtc.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/param.h>
+#include <linux/jiffies.h>
+#include <linux/bcd.h>
+#include <linux/timex.h>
+#include <linux/init.h>
+
+u64 jiffies_64 = INITIAL_JIFFIES;
+
+EXPORT_SYMBOL(jiffies_64);
+
+int have_rtc; /* used to remember if we have an RTC or not */;
+
+#define TICK_SIZE tick
+
+extern unsigned long wall_jiffies;
+extern unsigned long loops_per_jiffy; /* init/main.c */
+unsigned long loops_per_usec;
+
+extern unsigned long do_slow_gettimeoffset(void);
+static unsigned long (*do_gettimeoffset)(void) = do_slow_gettimeoffset;
+
+/*
+ * This version of gettimeofday has near microsecond resolution.
+ *
+ * Note: Division is quite slow on CRIS and do_gettimeofday is called
+ * rather often. Maybe we should do some kind of approximation here
+ * (a naive approximation would be to divide by 1024).
+ */
+void do_gettimeofday(struct timeval *tv)
+{
+ unsigned long flags;
+ signed long usec, sec;
+ local_irq_save(flags);
+ local_irq_disable();
+ usec = do_gettimeoffset();
+ {
+ unsigned long lost = jiffies - wall_jiffies;
+ if (lost)
+ usec += lost * (1000000 / HZ);
+ }
+
+ /*
+ * If time_adjust is negative then NTP is slowing the clock
+ * so make sure not to go into next possible interval.
+ * Better to lose some accuracy than have time go backwards..
+ */
+ if (unlikely(time_adjust < 0) && usec > tickadj)
+ usec = tickadj;
+
+ sec = xtime.tv_sec;
+ usec += xtime.tv_nsec / 1000;
+ local_irq_restore(flags);
+
+ while (usec >= 1000000) {
+ usec -= 1000000;
+ sec++;
+ }
+
+ tv->tv_sec = sec;
+ tv->tv_usec = usec;
+}
+
+EXPORT_SYMBOL(do_gettimeofday);
+
+int do_settimeofday(struct timespec *tv)
+{
+ time_t wtm_sec, sec = tv->tv_sec;
+ long wtm_nsec, nsec = tv->tv_nsec;
+
+ if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
+ return -EINVAL;
+
+ write_seqlock_irq(&xtime_lock);
+ /*
+ * This is revolting. We need to set "xtime" correctly. However, the
+ * value in this location is the value at the most recent update of
+ * wall time. Discover what correction gettimeofday() would have
+ * made, and then undo it!
+ */
+ nsec -= do_gettimeoffset() * NSEC_PER_USEC;
+ nsec -= (jiffies - wall_jiffies) * TICK_NSEC;
+
+ wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
+ wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
+
+ set_normalized_timespec(&xtime, sec, nsec);
+ set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
+
+ time_adjust = 0; /* stop active adjtime() */
+ time_status |= STA_UNSYNC;
+ time_maxerror = NTP_PHASE_LIMIT;
+ time_esterror = NTP_PHASE_LIMIT;
+ write_sequnlock_irq(&xtime_lock);
+ clock_was_set();
+ return 0;
+}
+
+EXPORT_SYMBOL(do_settimeofday);
+
+
+/*
+ * BUG: This routine does not handle hour overflow properly; it just
+ * sets the minutes. Usually you'll only notice that after reboot!
+ */
+
+int set_rtc_mmss(unsigned long nowtime)
+{
+ int retval = 0;
+ int real_seconds, real_minutes, cmos_minutes;
+
+ printk(KERN_DEBUG "set_rtc_mmss(%lu)\n", nowtime);
+
+ if(!have_rtc)
+ return 0;
+
+ cmos_minutes = CMOS_READ(RTC_MINUTES);
+ BCD_TO_BIN(cmos_minutes);
+
+ /*
+ * since we're only adjusting minutes and seconds,
+ * don't interfere with hour overflow. This avoids
+ * messing with unknown time zones but requires your
+ * RTC not to be off by more than 15 minutes
+ */
+ real_seconds = nowtime % 60;
+ real_minutes = nowtime / 60;
+ if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
+ real_minutes += 30; /* correct for half hour time zone */
+ real_minutes %= 60;
+
+ if (abs(real_minutes - cmos_minutes) < 30) {
+ BIN_TO_BCD(real_seconds);
+ BIN_TO_BCD(real_minutes);
+ CMOS_WRITE(real_seconds,RTC_SECONDS);
+ CMOS_WRITE(real_minutes,RTC_MINUTES);
+ } else {
+ printk(KERN_WARNING
+ "set_rtc_mmss: can't update from %d to %d\n",
+ cmos_minutes, real_minutes);
+ retval = -1;
+ }
+
+ return retval;
+}
+
+/* grab the time from the RTC chip */
+
+unsigned long
+get_cmos_time(void)
+{
+ unsigned int year, mon, day, hour, min, sec;
+
+ sec = CMOS_READ(RTC_SECONDS);
+ min = CMOS_READ(RTC_MINUTES);
+ hour = CMOS_READ(RTC_HOURS);
+ day = CMOS_READ(RTC_DAY_OF_MONTH);
+ mon = CMOS_READ(RTC_MONTH);
+ year = CMOS_READ(RTC_YEAR);
+
+ printk(KERN_DEBUG
+ "rtc: sec 0x%x min 0x%x hour 0x%x day 0x%x mon 0x%x year 0x%x\n",
+ sec, min, hour, day, mon, year);
+
+ BCD_TO_BIN(sec);
+ BCD_TO_BIN(min);
+ BCD_TO_BIN(hour);
+ BCD_TO_BIN(day);
+ BCD_TO_BIN(mon);
+ BCD_TO_BIN(year);
+
+ if ((year += 1900) < 1970)
+ year += 100;
+
+ return mktime(year, mon, day, hour, min, sec);
+}
+
+/* update xtime from the CMOS settings. used when /dev/rtc gets a SET_TIME.
+ * TODO: this doesn't reset the fancy NTP phase stuff as do_settimeofday does.
+ */
+
+void
+update_xtime_from_cmos(void)
+{
+ if(have_rtc) {
+ xtime.tv_sec = get_cmos_time();
+ xtime.tv_nsec = 0;
+ }
+}
+
+/*
+ * Scheduler clock - returns current time in nanosec units.
+ */
+unsigned long long sched_clock(void)
+{
+ return (unsigned long long)jiffies * (1000000000 / HZ);
+}
+
+static int
+__init init_udelay(void)
+{
+ loops_per_usec = (loops_per_jiffy * HZ) / 1000000;
+ return 0;
+}
+
+__initcall(init_udelay);
diff --git a/arch/cris/kernel/traps.c b/arch/cris/kernel/traps.c
new file mode 100644
index 00000000000..d4dfa050e3a
--- /dev/null
+++ b/arch/cris/kernel/traps.c
@@ -0,0 +1,144 @@
+/* $Id: traps.c,v 1.9 2004/05/11 12:28:26 starvik Exp $
+ *
+ * linux/arch/cris/traps.c
+ *
+ * Here we handle the break vectors not used by the system call
+ * mechanism, as well as some general stack/register dumping
+ * things.
+ *
+ * Copyright (C) 2000-2002 Axis Communications AB
+ *
+ * Authors: Bjorn Wesen
+ * Hans-Peter Nilsson
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <asm/pgtable.h>
+#include <asm/uaccess.h>
+
+static int kstack_depth_to_print = 24;
+
+void show_trace(unsigned long * stack)
+{
+ unsigned long addr, module_start, module_end;
+ extern char _stext, _etext;
+ int i;
+
+ printk("\nCall Trace: ");
+
+ i = 1;
+ module_start = VMALLOC_START;
+ module_end = VMALLOC_END;
+
+ while (((long) stack & (THREAD_SIZE-1)) != 0) {
+ if (__get_user (addr, stack)) {
+ /* This message matches "failing address" marked
+ s390 in ksymoops, so lines containing it will
+ not be filtered out by ksymoops. */
+ printk ("Failing address 0x%lx\n", (unsigned long)stack);
+ break;
+ }
+ stack++;
+
+ /*
+ * If the address is either in the text segment of the
+ * kernel, or in the region which contains vmalloc'ed
+ * memory, it *may* be the address of a calling
+ * routine; if so, print it so that someone tracing
+ * down the cause of the crash will be able to figure
+ * out the call path that was taken.
+ */
+ if (((addr >= (unsigned long) &_stext) &&
+ (addr <= (unsigned long) &_etext)) ||
+ ((addr >= module_start) && (addr <= module_end))) {
+ if (i && ((i % 8) == 0))
+ printk("\n ");
+ printk("[<%08lx>] ", addr);
+ i++;
+ }
+ }
+}
+
+/*
+ * These constants are for searching for possible module text
+ * segments. MODULE_RANGE is a guess of how much space is likely
+ * to be vmalloced.
+ */
+
+#define MODULE_RANGE (8*1024*1024)
+
+/*
+ * The output (format, strings and order) is adjusted to be usable with
+ * ksymoops-2.4.1 with some necessary CRIS-specific patches. Please don't
+ * change it unless you're serious about adjusting ksymoops and syncing
+ * with the ksymoops maintainer.
+ */
+
+void
+show_stack(struct task_struct *task, unsigned long *sp)
+{
+ unsigned long *stack, addr;
+ int i;
+
+ /*
+ * debugging aid: "show_stack(NULL);" prints a
+ * back trace.
+ */
+
+ if(sp == NULL) {
+ if (task)
+ sp = (unsigned long*)task->thread.ksp;
+ else
+ sp = (unsigned long*)rdsp();
+ }
+
+ stack = sp;
+
+ printk("\nStack from %08lx:\n ", (unsigned long)stack);
+ for(i = 0; i < kstack_depth_to_print; i++) {
+ if (((long) stack & (THREAD_SIZE-1)) == 0)
+ break;
+ if (i && ((i % 8) == 0))
+ printk("\n ");
+ if (__get_user (addr, stack)) {
+ /* This message matches "failing address" marked
+ s390 in ksymoops, so lines containing it will
+ not be filtered out by ksymoops. */
+ printk ("Failing address 0x%lx\n", (unsigned long)stack);
+ break;
+ }
+ stack++;
+ printk("%08lx ", addr);
+ }
+ show_trace(sp);
+}
+
+#if 0
+/* displays a short stack trace */
+
+int
+show_stack()
+{
+ unsigned long *sp = (unsigned long *)rdusp();
+ int i;
+ printk("Stack dump [0x%08lx]:\n", (unsigned long)sp);
+ for(i = 0; i < 16; i++)
+ printk("sp + %d: 0x%08lx\n", i*4, sp[i]);
+ return 0;
+}
+#endif
+
+void dump_stack(void)
+{
+ show_stack(NULL, NULL);
+}
+
+EXPORT_SYMBOL(dump_stack);
+
+void __init
+trap_init(void)
+{
+ /* Nothing needs to be done */
+}
diff --git a/arch/cris/mm/Makefile b/arch/cris/mm/Makefile
new file mode 100644
index 00000000000..d3ae08c90b4
--- /dev/null
+++ b/arch/cris/mm/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the linux cris-specific parts of the memory manager.
+#
+
+obj-y := init.o fault.o tlb.o ioremap.o
+
diff --git a/arch/cris/mm/fault.c b/arch/cris/mm/fault.c
new file mode 100644
index 00000000000..03254b9eded
--- /dev/null
+++ b/arch/cris/mm/fault.c
@@ -0,0 +1,387 @@
+/*
+ * linux/arch/cris/mm/fault.c
+ *
+ * Copyright (C) 2000, 2001 Axis Communications AB
+ *
+ * Authors: Bjorn Wesen
+ *
+ * $Log: fault.c,v $
+ * Revision 1.11 2004/05/14 07:58:05 starvik
+ * Merge of changes from 2.4
+ *
+ * Revision 1.10 2003/10/27 14:51:24 starvik
+ * Removed debugcode
+ *
+ * Revision 1.9 2003/10/27 14:50:42 starvik
+ * Changed do_page_fault signature
+ *
+ * Revision 1.8 2003/07/04 13:02:48 tobiasa
+ * Moved code snippet from arch/cris/mm/fault.c that searches for fixup code
+ * to seperate function in arch-specific files.
+ *
+ * Revision 1.7 2003/01/22 06:48:38 starvik
+ * Fixed warnings issued by GCC 3.2.1
+ *
+ * Revision 1.6 2003/01/09 14:42:52 starvik
+ * Merge of Linux 2.5.55
+ *
+ * Revision 1.5 2002/12/11 14:44:48 starvik
+ * Extracted v10 (ETRAX 100LX) specific stuff to arch/cris/arch-v10/mm
+ *
+ * Revision 1.4 2002/11/13 15:10:28 starvik
+ * pte_offset has been renamed to pte_offset_kernel
+ *
+ * Revision 1.3 2002/11/05 06:45:13 starvik
+ * Merge of Linux 2.5.45
+ *
+ * Revision 1.2 2001/12/18 13:35:22 bjornw
+ * Applied the 2.4.13->2.4.16 CRIS patch to 2.5.1 (is a copy of 2.4.15).
+ *
+ * Revision 1.20 2001/11/22 13:34:06 bjornw
+ * * Bug workaround (LX TR89): force a rerun of the whole of an interrupted
+ * unaligned write, because the second half of the write will be corrupted
+ * otherwise. Affected unaligned writes spanning not-yet mapped pages.
+ * * Optimization: use the wr_rd bit in R_MMU_CAUSE to know whether a miss
+ * was due to a read or a write (before we didn't know this until the next
+ * restart of the interrupted instruction, thus wasting one fault-irq)
+ *
+ * Revision 1.19 2001/11/12 19:02:10 pkj
+ * Fixed compiler warnings.
+ *
+ * Revision 1.18 2001/07/18 22:14:32 bjornw
+ * Enable interrupts in the bulk of do_page_fault
+ *
+ * Revision 1.17 2001/07/18 13:07:23 bjornw
+ * * Detect non-existant PTE's in vmalloc pmd synchronization
+ * * Remove comment about fast-paths for VMALLOC_START etc, because all that
+ * was totally bogus anyway it turned out :)
+ * * Fix detection of vmalloc-area synchronization
+ * * Add some comments
+ *
+ * Revision 1.16 2001/06/13 00:06:08 bjornw
+ * current_pgd should be volatile
+ *
+ * Revision 1.15 2001/06/13 00:02:23 bjornw
+ * Use a separate variable to store the current pgd to avoid races in schedule
+ *
+ * Revision 1.14 2001/05/16 17:41:07 hp
+ * Last comment tweak further tweaked.
+ *
+ * Revision 1.13 2001/05/15 00:58:44 hp
+ * Expand a bit on the comment why we compare address >= TASK_SIZE rather
+ * than >= VMALLOC_START.
+ *
+ * Revision 1.12 2001/04/04 10:51:14 bjornw
+ * mmap_sem is grabbed for reading
+ *
+ * Revision 1.11 2001/03/23 07:36:07 starvik
+ * Corrected according to review remarks
+ *
+ * Revision 1.10 2001/03/21 16:10:11 bjornw
+ * CRIS_FRAME_FIXUP not needed anymore, use FRAME_NORMAL
+ *
+ * Revision 1.9 2001/03/05 13:22:20 bjornw
+ * Spell-fix and fix in vmalloc_fault handling
+ *
+ * Revision 1.8 2000/11/22 14:45:31 bjornw
+ * * 2.4.0-test10 removed the set_pgdir instantaneous kernel global mapping
+ * into all processes. Instead we fill in the missing PTE entries on demand.
+ *
+ * Revision 1.7 2000/11/21 16:39:09 bjornw
+ * fixup switches frametype
+ *
+ * Revision 1.6 2000/11/17 16:54:08 bjornw
+ * More detailed siginfo reporting
+ *
+ *
+ */
+
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <asm/uaccess.h>
+
+extern int find_fixup_code(struct pt_regs *);
+extern void die_if_kernel(const char *, struct pt_regs *, long);
+
+/* debug of low-level TLB reload */
+#undef DEBUG
+
+#ifdef DEBUG
+#define D(x) x
+#else
+#define D(x)
+#endif
+
+/* debug of higher-level faults */
+#define DPG(x)
+
+/* current active page directory */
+
+volatile pgd_t *current_pgd;
+
+/*
+ * This routine handles page faults. It determines the address,
+ * and the problem, and then passes it off to one of the appropriate
+ * routines.
+ *
+ * Notice that the address we're given is aligned to the page the fault
+ * occurred in, since we only get the PFN in R_MMU_CAUSE not the complete
+ * address.
+ *
+ * error_code:
+ * bit 0 == 0 means no page found, 1 means protection fault
+ * bit 1 == 0 means read, 1 means write
+ *
+ * If this routine detects a bad access, it returns 1, otherwise it
+ * returns 0.
+ */
+
+asmlinkage void
+do_page_fault(unsigned long address, struct pt_regs *regs,
+ int protection, int writeaccess)
+{
+ struct task_struct *tsk;
+ struct mm_struct *mm;
+ struct vm_area_struct * vma;
+ siginfo_t info;
+
+ D(printk("Page fault for %X at %X, prot %d write %d\n",
+ address, regs->erp, protection, writeaccess));
+
+ tsk = current;
+
+ /*
+ * We fault-in kernel-space virtual memory on-demand. The
+ * 'reference' page table is init_mm.pgd.
+ *
+ * NOTE! We MUST NOT take any locks for this case. We may
+ * be in an interrupt or a critical region, and should
+ * only copy the information from the master page table,
+ * nothing more.
+ *
+ * NOTE2: This is done so that, when updating the vmalloc
+ * mappings we don't have to walk all processes pgdirs and
+ * add the high mappings all at once. Instead we do it as they
+ * are used. However vmalloc'ed page entries have the PAGE_GLOBAL
+ * bit set so sometimes the TLB can use a lingering entry.
+ *
+ * This verifies that the fault happens in kernel space
+ * and that the fault was not a protection error (error_code & 1).
+ */
+
+ if (address >= VMALLOC_START &&
+ !protection &&
+ !user_mode(regs))
+ goto vmalloc_fault;
+
+ /* we can and should enable interrupts at this point */
+ sti();
+
+ mm = tsk->mm;
+ info.si_code = SEGV_MAPERR;
+
+ /*
+ * If we're in an interrupt or have no user
+ * context, we must not take the fault..
+ */
+
+ if (in_interrupt() || !mm)
+ goto no_context;
+
+ down_read(&mm->mmap_sem);
+ vma = find_vma(mm, address);
+ if (!vma)
+ goto bad_area;
+ if (vma->vm_start <= address)
+ goto good_area;
+ if (!(vma->vm_flags & VM_GROWSDOWN))
+ goto bad_area;
+ if (user_mode(regs)) {
+ /*
+ * accessing the stack below usp is always a bug.
+ * we get page-aligned addresses so we can only check
+ * if we're within a page from usp, but that might be
+ * enough to catch brutal errors at least.
+ */
+ if (address + PAGE_SIZE < rdusp())
+ goto bad_area;
+ }
+ if (expand_stack(vma, address))
+ goto bad_area;
+
+ /*
+ * Ok, we have a good vm_area for this memory access, so
+ * we can handle it..
+ */
+
+ good_area:
+ info.si_code = SEGV_ACCERR;
+
+ /* first do some preliminary protection checks */
+
+ if (writeaccess) {
+ if (!(vma->vm_flags & VM_WRITE))
+ goto bad_area;
+ } else {
+ if (!(vma->vm_flags & (VM_READ | VM_EXEC)))
+ goto bad_area;
+ }
+
+ /*
+ * If for any reason at all we couldn't handle the fault,
+ * make sure we exit gracefully rather than endlessly redo
+ * the fault.
+ */
+
+ switch (handle_mm_fault(mm, vma, address, writeaccess)) {
+ case 1:
+ tsk->min_flt++;
+ break;
+ case 2:
+ tsk->maj_flt++;
+ break;
+ case 0:
+ goto do_sigbus;
+ default:
+ goto out_of_memory;
+ }
+
+ up_read(&mm->mmap_sem);
+ return;
+
+ /*
+ * Something tried to access memory that isn't in our memory map..
+ * Fix it, but check if it's kernel or user first..
+ */
+
+ bad_area:
+ up_read(&mm->mmap_sem);
+
+ bad_area_nosemaphore:
+ DPG(show_registers(regs));
+
+ /* User mode accesses just cause a SIGSEGV */
+
+ if (user_mode(regs)) {
+ info.si_signo = SIGSEGV;
+ info.si_errno = 0;
+ /* info.si_code has been set above */
+ info.si_addr = (void *)address;
+ force_sig_info(SIGSEGV, &info, tsk);
+ return;
+ }
+
+ no_context:
+
+ /* Are we prepared to handle this kernel fault?
+ *
+ * (The kernel has valid exception-points in the source
+ * when it acesses user-memory. When it fails in one
+ * of those points, we find it in a table and do a jump
+ * to some fixup code that loads an appropriate error
+ * code)
+ */
+
+ if (find_fixup_code(regs))
+ return;
+
+ /*
+ * Oops. The kernel tried to access some bad page. We'll have to
+ * terminate things with extreme prejudice.
+ */
+
+ if ((unsigned long) (address) < PAGE_SIZE)
+ printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference");
+ else
+ printk(KERN_ALERT "Unable to handle kernel access");
+ printk(" at virtual address %08lx\n",address);
+
+ die_if_kernel("Oops", regs, (writeaccess << 1) | protection);
+
+ do_exit(SIGKILL);
+
+ /*
+ * We ran out of memory, or some other thing happened to us that made
+ * us unable to handle the page fault gracefully.
+ */
+
+ out_of_memory:
+ up_read(&mm->mmap_sem);
+ printk("VM: killing process %s\n", tsk->comm);
+ if (user_mode(regs))
+ do_exit(SIGKILL);
+ goto no_context;
+
+ do_sigbus:
+ up_read(&mm->mmap_sem);
+
+ /*
+ * Send a sigbus, regardless of whether we were in kernel
+ * or user mode.
+ */
+ info.si_signo = SIGBUS;
+ info.si_errno = 0;
+ info.si_code = BUS_ADRERR;
+ info.si_addr = (void *)address;
+ force_sig_info(SIGBUS, &info, tsk);
+
+ /* Kernel mode? Handle exceptions or die */
+ if (!user_mode(regs))
+ goto no_context;
+ return;
+
+vmalloc_fault:
+ {
+ /*
+ * Synchronize this task's top level page-table
+ * with the 'reference' page table.
+ *
+ * Use current_pgd instead of tsk->active_mm->pgd
+ * since the latter might be unavailable if this
+ * code is executed in a misfortunately run irq
+ * (like inside schedule() between switch_mm and
+ * switch_to...).
+ */
+
+ int offset = pgd_index(address);
+ pgd_t *pgd, *pgd_k;
+ pmd_t *pmd, *pmd_k;
+ pte_t *pte_k;
+
+ pgd = (pgd_t *)current_pgd + offset;
+ pgd_k = init_mm.pgd + offset;
+
+ /* Since we're two-level, we don't need to do both
+ * set_pgd and set_pmd (they do the same thing). If
+ * we go three-level at some point, do the right thing
+ * with pgd_present and set_pgd here.
+ *
+ * Also, since the vmalloc area is global, we don't
+ * need to copy individual PTE's, it is enough to
+ * copy the pgd pointer into the pte page of the
+ * root task. If that is there, we'll find our pte if
+ * it exists.
+ */
+
+ pmd = pmd_offset(pgd, address);
+ pmd_k = pmd_offset(pgd_k, address);
+
+ if (!pmd_present(*pmd_k))
+ goto bad_area_nosemaphore;
+
+ set_pmd(pmd, *pmd_k);
+
+ /* Make sure the actual PTE exists as well to
+ * catch kernel vmalloc-area accesses to non-mapped
+ * addresses. If we don't do this, this will just
+ * silently loop forever.
+ */
+
+ pte_k = pte_offset_kernel(pmd_k, address);
+ if (!pte_present(*pte_k))
+ goto no_context;
+
+ return;
+ }
+}
diff --git a/arch/cris/mm/init.c b/arch/cris/mm/init.c
new file mode 100644
index 00000000000..31a0018b525
--- /dev/null
+++ b/arch/cris/mm/init.c
@@ -0,0 +1,225 @@
+/*
+ * linux/arch/cris/mm/init.c
+ *
+ * Copyright (C) 1995 Linus Torvalds
+ * Copyright (C) 2000,2001 Axis Communications AB
+ *
+ * Authors: Bjorn Wesen (bjornw@axis.com)
+ *
+ * $Log: init.c,v $
+ * Revision 1.11 2004/05/28 09:28:56 starvik
+ * Calculation of loops_per_usec moved because initalization order has changed
+ * in Linux 2.6.
+ *
+ * Revision 1.10 2004/05/14 07:58:05 starvik
+ * Merge of changes from 2.4
+ *
+ * Revision 1.9 2003/07/04 08:27:54 starvik
+ * Merge of Linux 2.5.74
+ *
+ * Revision 1.8 2003/04/09 05:20:48 starvik
+ * Merge of Linux 2.5.67
+ *
+ * Revision 1.7 2003/01/22 06:48:38 starvik
+ * Fixed warnings issued by GCC 3.2.1
+ *
+ * Revision 1.6 2002/12/11 14:44:48 starvik
+ * Extracted v10 (ETRAX 100LX) specific stuff to arch/cris/arch-v10/mm
+ *
+ * Revision 1.5 2002/11/18 07:37:37 starvik
+ * Added cache bug workaround (from Linux 2.4)
+ *
+ * Revision 1.4 2002/11/13 15:40:24 starvik
+ * Removed the page table cache stuff (as done in other archs)
+ *
+ * Revision 1.3 2002/11/05 06:45:13 starvik
+ * Merge of Linux 2.5.45
+ *
+ * Revision 1.2 2001/12/18 13:35:22 bjornw
+ * Applied the 2.4.13->2.4.16 CRIS patch to 2.5.1 (is a copy of 2.4.15).
+ *
+ * Revision 1.31 2001/11/13 16:22:00 bjornw
+ * Skip calculating totalram and sharedram in si_meminfo
+ *
+ * Revision 1.30 2001/11/12 19:02:10 pkj
+ * Fixed compiler warnings.
+ *
+ * Revision 1.29 2001/07/25 16:09:50 bjornw
+ * val->sharedram will stay 0
+ *
+ * Revision 1.28 2001/06/28 16:30:17 bjornw
+ * Oops. This needs to wait until 2.4.6 is merged
+ *
+ * Revision 1.27 2001/06/28 14:04:07 bjornw
+ * Fill in sharedram
+ *
+ * Revision 1.26 2001/06/18 06:36:02 hp
+ * Enable free_initmem of __init-type pages
+ *
+ * Revision 1.25 2001/06/13 00:02:23 bjornw
+ * Use a separate variable to store the current pgd to avoid races in schedule
+ *
+ * Revision 1.24 2001/05/15 00:52:20 hp
+ * Only map segment 0xa as seg if CONFIG_JULIETTE
+ *
+ * Revision 1.23 2001/04/04 14:35:40 bjornw
+ * * Removed get_pte_slow and friends (2.4.3 change)
+ * * Removed bad_pmd handling (2.4.3 change)
+ *
+ * Revision 1.22 2001/04/04 13:38:04 matsfg
+ * Moved ioremap to a separate function instead
+ *
+ * Revision 1.21 2001/03/27 09:28:33 bjornw
+ * ioremap used too early - lets try it in mem_init instead
+ *
+ * Revision 1.20 2001/03/23 07:39:21 starvik
+ * Corrected according to review remarks
+ *
+ * Revision 1.19 2001/03/15 14:25:17 bjornw
+ * More general shadow registers and ioremaped addresses for external I/O
+ *
+ * Revision 1.18 2001/02/23 12:46:44 bjornw
+ * * 0xc was not CSE1; 0x8 is, same as uncached flash, so we move the uncached
+ * flash during CRIS_LOW_MAP from 0xe to 0x8 so both the flash and the I/O
+ * is mapped straight over (for !CRIS_LOW_MAP the uncached flash is still 0xe)
+ *
+ * Revision 1.17 2001/02/22 15:05:21 bjornw
+ * Map 0x9 straight over during LOW_MAP to allow for memory mapped LEDs
+ *
+ * Revision 1.16 2001/02/22 15:02:35 bjornw
+ * Map 0xc straight over during LOW_MAP to allow for memory mapped I/O
+ *
+ * Revision 1.15 2001/01/10 21:12:10 bjornw
+ * loops_per_sec -> loops_per_jiffy
+ *
+ * Revision 1.14 2000/11/22 16:23:20 bjornw
+ * Initialize totalhigh counters to 0 to make /proc/meminfo look nice.
+ *
+ * Revision 1.13 2000/11/21 16:37:51 bjornw
+ * Temporarily disable initmem freeing
+ *
+ * Revision 1.12 2000/11/21 13:55:07 bjornw
+ * Use CONFIG_CRIS_LOW_MAP for the low VM map instead of explicit CPU type
+ *
+ * Revision 1.11 2000/10/06 12:38:22 bjornw
+ * Cast empty_bad_page correctly (should really be of * type from the start..
+ *
+ * Revision 1.10 2000/10/04 16:53:57 bjornw
+ * Fix memory-map due to LX features
+ *
+ * Revision 1.9 2000/09/13 15:47:49 bjornw
+ * Wrong count in reserved-pages loop
+ *
+ * Revision 1.8 2000/09/13 14:35:10 bjornw
+ * 2.4.0-test8 added a new arg to free_area_init_node
+ *
+ * Revision 1.7 2000/08/17 15:35:55 bjornw
+ * 2.4.0-test6 removed MAP_NR and inserted virt_to_page
+ *
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <asm/tlb.h>
+
+DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
+
+unsigned long empty_zero_page;
+
+extern char _stext, _edata, _etext; /* From linkerscript */
+extern char __init_begin, __init_end;
+
+void
+show_mem(void)
+{
+ int i,free = 0,total = 0,cached = 0, reserved = 0, nonshared = 0;
+ int shared = 0;
+
+ printk("\nMem-info:\n");
+ show_free_areas();
+ printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
+ i = max_mapnr;
+ while (i-- > 0) {
+ total++;
+ if (PageReserved(mem_map+i))
+ reserved++;
+ else if (PageSwapCache(mem_map+i))
+ cached++;
+ else if (!page_count(mem_map+i))
+ free++;
+ else if (page_count(mem_map+i) == 1)
+ nonshared++;
+ else
+ shared += page_count(mem_map+i) - 1;
+ }
+ printk("%d pages of RAM\n",total);
+ printk("%d free pages\n",free);
+ printk("%d reserved pages\n",reserved);
+ printk("%d pages nonshared\n",nonshared);
+ printk("%d pages shared\n",shared);
+ printk("%d pages swap cached\n",cached);
+}
+
+void __init
+mem_init(void)
+{
+ int codesize, reservedpages, datasize, initsize;
+ unsigned long tmp;
+
+ if(!mem_map)
+ BUG();
+
+ /* max/min_low_pfn was set by setup.c
+ * now we just copy it to some other necessary places...
+ *
+ * high_memory was also set in setup.c
+ */
+
+ max_mapnr = num_physpages = max_low_pfn - min_low_pfn;
+
+ /* this will put all memory onto the freelists */
+ totalram_pages = free_all_bootmem();
+
+ reservedpages = 0;
+ for (tmp = 0; tmp < max_mapnr; tmp++) {
+ /*
+ * Only count reserved RAM pages
+ */
+ if (PageReserved(mem_map + tmp))
+ reservedpages++;
+ }
+
+ codesize = (unsigned long) &_etext - (unsigned long) &_stext;
+ datasize = (unsigned long) &_edata - (unsigned long) &_etext;
+ initsize = (unsigned long) &__init_end - (unsigned long) &__init_begin;
+
+ printk(KERN_INFO
+ "Memory: %luk/%luk available (%dk kernel code, %dk reserved, %dk data, "
+ "%dk init)\n" ,
+ (unsigned long) nr_free_pages() << (PAGE_SHIFT-10),
+ max_mapnr << (PAGE_SHIFT-10),
+ codesize >> 10,
+ reservedpages << (PAGE_SHIFT-10),
+ datasize >> 10,
+ initsize >> 10
+ );
+}
+
+/* free the pages occupied by initialization code */
+
+void
+free_initmem(void)
+{
+ unsigned long addr;
+
+ addr = (unsigned long)(&__init_begin);
+ for (; addr < (unsigned long)(&__init_end); addr += PAGE_SIZE) {
+ ClearPageReserved(virt_to_page(addr));
+ set_page_count(virt_to_page(addr), 1);
+ free_page(addr);
+ totalram_pages++;
+ }
+ printk (KERN_INFO "Freeing unused kernel memory: %luk freed\n",
+ (unsigned long)((&__init_end - &__init_begin) >> 10));
+}
diff --git a/arch/cris/mm/ioremap.c b/arch/cris/mm/ioremap.c
new file mode 100644
index 00000000000..6b9130bfb6c
--- /dev/null
+++ b/arch/cris/mm/ioremap.c
@@ -0,0 +1,146 @@
+/*
+ * arch/cris/mm/ioremap.c
+ *
+ * Re-map IO memory to kernel address space so that we can access it.
+ * Needed for memory-mapped I/O devices mapped outside our normal DRAM
+ * window (that is, all memory-mapped I/O devices).
+ *
+ * (C) Copyright 1995 1996 Linus Torvalds
+ * CRIS-port by Axis Communications AB
+ */
+
+#include <linux/vmalloc.h>
+#include <asm/io.h>
+#include <asm/pgalloc.h>
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+
+extern inline void remap_area_pte(pte_t * pte, unsigned long address, unsigned long size,
+ unsigned long phys_addr, unsigned long flags)
+{
+ unsigned long end;
+
+ address &= ~PMD_MASK;
+ end = address + size;
+ if (end > PMD_SIZE)
+ end = PMD_SIZE;
+ if (address >= end)
+ BUG();
+ do {
+ if (!pte_none(*pte)) {
+ printk("remap_area_pte: page already exists\n");
+ BUG();
+ }
+ set_pte(pte, mk_pte_phys(phys_addr, __pgprot(_PAGE_PRESENT | __READABLE |
+ __WRITEABLE | _PAGE_GLOBAL |
+ _PAGE_KERNEL | flags)));
+ address += PAGE_SIZE;
+ phys_addr += PAGE_SIZE;
+ pte++;
+ } while (address && (address < end));
+}
+
+static inline int remap_area_pmd(pmd_t * pmd, unsigned long address, unsigned long size,
+ unsigned long phys_addr, unsigned long flags)
+{
+ unsigned long end;
+
+ address &= ~PGDIR_MASK;
+ end = address + size;
+ if (end > PGDIR_SIZE)
+ end = PGDIR_SIZE;
+ phys_addr -= address;
+ if (address >= end)
+ BUG();
+ do {
+ pte_t * pte = pte_alloc_kernel(&init_mm, pmd, address);
+ if (!pte)
+ return -ENOMEM;
+ remap_area_pte(pte, address, end - address, address + phys_addr, flags);
+ address = (address + PMD_SIZE) & PMD_MASK;
+ pmd++;
+ } while (address && (address < end));
+ return 0;
+}
+
+static int remap_area_pages(unsigned long address, unsigned long phys_addr,
+ unsigned long size, unsigned long flags)
+{
+ int error;
+ pgd_t * dir;
+ unsigned long end = address + size;
+
+ phys_addr -= address;
+ dir = pgd_offset(&init_mm, address);
+ flush_cache_all();
+ if (address >= end)
+ BUG();
+ spin_lock(&init_mm.page_table_lock);
+ do {
+ pmd_t *pmd;
+ pmd = pmd_alloc(&init_mm, dir, address);
+ error = -ENOMEM;
+ if (!pmd)
+ break;
+ if (remap_area_pmd(pmd, address, end - address,
+ phys_addr + address, flags))
+ break;
+ error = 0;
+ address = (address + PGDIR_SIZE) & PGDIR_MASK;
+ dir++;
+ } while (address && (address < end));
+ spin_unlock(&init_mm.page_table_lock);
+ flush_tlb_all();
+ return error;
+}
+
+/*
+ * Generic mapping function (not visible outside):
+ */
+
+/*
+ * Remap an arbitrary physical address space into the kernel virtual
+ * address space. Needed when the kernel wants to access high addresses
+ * directly.
+ *
+ * NOTE! We need to allow non-page-aligned mappings too: we will obviously
+ * have to convert them into an offset in a page-aligned mapping, but the
+ * caller shouldn't need to know that small detail.
+ */
+void * __ioremap(unsigned long phys_addr, unsigned long size, unsigned long flags)
+{
+ void * addr;
+ struct vm_struct * area;
+ unsigned long offset, last_addr;
+
+ /* Don't allow wraparound or zero size */
+ last_addr = phys_addr + size - 1;
+ if (!size || last_addr < phys_addr)
+ return NULL;
+
+ /*
+ * Mappings have to be page-aligned
+ */
+ offset = phys_addr & ~PAGE_MASK;
+ phys_addr &= PAGE_MASK;
+ size = PAGE_ALIGN(last_addr+1) - phys_addr;
+
+ /*
+ * Ok, go for it..
+ */
+ area = get_vm_area(size, VM_IOREMAP);
+ if (!area)
+ return NULL;
+ addr = area->addr;
+ if (remap_area_pages((unsigned long) addr, phys_addr, size, flags)) {
+ vfree(addr);
+ return NULL;
+ }
+ return (void *) (offset + (char *)addr);
+}
+
+void iounmap(void *addr)
+{
+ if (addr > high_memory)
+ return vfree((void *) (PAGE_MASK & (unsigned long) addr));
+}
diff --git a/arch/cris/mm/tlb.c b/arch/cris/mm/tlb.c
new file mode 100644
index 00000000000..23eca5ad738
--- /dev/null
+++ b/arch/cris/mm/tlb.c
@@ -0,0 +1,126 @@
+/*
+ * linux/arch/cris/mm/tlb.c
+ *
+ * Copyright (C) 2000, 2001 Axis Communications AB
+ *
+ * Authors: Bjorn Wesen (bjornw@axis.com)
+ *
+ */
+
+#include <linux/init.h>
+#include <asm/tlb.h>
+
+#define D(x)
+
+/* The TLB can host up to 64 different mm contexts at the same time.
+ * The running context is R_MMU_CONTEXT, and each TLB entry contains a
+ * page_id that has to match to give a hit. In page_id_map, we keep track
+ * of which mm's we have assigned which page_id's, so that we know when
+ * to invalidate TLB entries.
+ *
+ * The last page_id is never running - it is used as an invalid page_id
+ * so we can make TLB entries that will never match.
+ *
+ * Notice that we need to make the flushes atomic, otherwise an interrupt
+ * handler that uses vmalloced memory might cause a TLB load in the middle
+ * of a flush causing.
+ */
+
+struct mm_struct *page_id_map[NUM_PAGEID];
+static int map_replace_ptr = 1; /* which page_id_map entry to replace next */
+
+/*
+ * Initialize the context related info for a new mm_struct
+ * instance.
+ */
+
+int
+init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+ mm->context = NO_CONTEXT;
+ return 0;
+}
+
+/* the following functions are similar to those used in the PPC port */
+
+static inline void
+alloc_context(struct mm_struct *mm)
+{
+ struct mm_struct *old_mm;
+
+ D(printk("tlb: alloc context %d (%p)\n", map_replace_ptr, mm));
+
+ /* did we replace an mm ? */
+
+ old_mm = page_id_map[map_replace_ptr];
+
+ if(old_mm) {
+ /* throw out any TLB entries belonging to the mm we replace
+ * in the map
+ */
+ flush_tlb_mm(old_mm);
+
+ old_mm->context = NO_CONTEXT;
+ }
+
+ /* insert it into the page_id_map */
+
+ mm->context = map_replace_ptr;
+ page_id_map[map_replace_ptr] = mm;
+
+ map_replace_ptr++;
+
+ if(map_replace_ptr == INVALID_PAGEID)
+ map_replace_ptr = 0; /* wrap around */
+}
+
+/*
+ * if needed, get a new MMU context for the mm. otherwise nothing is done.
+ */
+
+void
+get_mmu_context(struct mm_struct *mm)
+{
+ if(mm->context == NO_CONTEXT)
+ alloc_context(mm);
+}
+
+/* called by __exit_mm to destroy the used MMU context if any before
+ * destroying the mm itself. this is only called when the last user of the mm
+ * drops it.
+ *
+ * the only thing we really need to do here is mark the used PID slot
+ * as empty.
+ */
+
+void
+destroy_context(struct mm_struct *mm)
+{
+ if(mm->context != NO_CONTEXT) {
+ D(printk("destroy_context %d (%p)\n", mm->context, mm));
+ flush_tlb_mm(mm); /* TODO this might be redundant ? */
+ page_id_map[mm->context] = NULL;
+ /* mm->context = NO_CONTEXT; redundant.. mm will be freed */
+ }
+}
+
+/* called once during VM initialization, from init.c */
+
+void __init
+tlb_init(void)
+{
+ int i;
+
+ /* clear the page_id map */
+
+ for (i = 1; i < sizeof (page_id_map) / sizeof (page_id_map[0]); i++)
+ page_id_map[i] = NULL;
+
+ /* invalidate the entire TLB */
+
+ flush_tlb_all();
+
+ /* the init_mm has context 0 from the boot */
+
+ page_id_map[0] = &init_mm;
+}