diff options
Diffstat (limited to 'arch/h8300')
-rw-r--r-- | arch/h8300/Kconfig | 8 | ||||
-rw-r--r-- | arch/h8300/Makefile | 2 | ||||
-rw-r--r-- | arch/h8300/boot/Makefile | 12 | ||||
-rw-r--r-- | arch/h8300/boot/compressed/Makefile | 37 | ||||
-rw-r--r-- | arch/h8300/boot/compressed/head.S | 47 | ||||
-rw-r--r-- | arch/h8300/boot/compressed/misc.c | 219 | ||||
-rw-r--r-- | arch/h8300/kernel/Makefile | 6 | ||||
-rw-r--r-- | arch/h8300/kernel/irq.c | 211 | ||||
-rw-r--r-- | arch/h8300/kernel/ptrace.c | 1 | ||||
-rw-r--r-- | arch/h8300/kernel/setup.c | 3 | ||||
-rw-r--r-- | arch/h8300/kernel/sys_h8300.c | 1 | ||||
-rw-r--r-- | arch/h8300/kernel/time.c | 54 | ||||
-rw-r--r-- | arch/h8300/mm/kmap.c | 4 | ||||
-rw-r--r-- | arch/h8300/platform/h8300h/Makefile | 2 | ||||
-rw-r--r-- | arch/h8300/platform/h8300h/entry.S | 4 | ||||
-rw-r--r-- | arch/h8300/platform/h8300h/generic/Makefile | 2 | ||||
-rw-r--r-- | arch/h8300/platform/h8300h/ints_h8300h.c | 85 | ||||
-rw-r--r-- | arch/h8300/platform/h8s/entry.S | 17 |
18 files changed, 553 insertions, 162 deletions
diff --git a/arch/h8300/Kconfig b/arch/h8300/Kconfig index 1734d96422c..618dbad696f 100644 --- a/arch/h8300/Kconfig +++ b/arch/h8300/Kconfig @@ -49,10 +49,18 @@ config GENERIC_HWEIGHT bool default y +config GENERIC_HARDIRQS + bool + default y + config GENERIC_CALIBRATE_DELAY bool default y +config GENERIC_TIME + bool + default y + config TIME_LOW_RES bool default y diff --git a/arch/h8300/Makefile b/arch/h8300/Makefile index 40b3f56f366..b2d896a7e59 100644 --- a/arch/h8300/Makefile +++ b/arch/h8300/Makefile @@ -41,7 +41,7 @@ LDFLAGS += $(ldflags-y) CROSS_COMPILE = h8300-elf- LIBGCC := $(shell $(CROSS-COMPILE)$(CC) $(CFLAGS) -print-libgcc-file-name) -head-y := arch/$(ARCH)/platform/$(platform-y)/$(board-y)/crt0_$(model-y).o +head-y := arch/$(ARCH)/platform/$(PLATFORM)/$(BOARD)/crt0_$(MODEL).o core-y += arch/$(ARCH)/kernel/ \ arch/$(ARCH)/mm/ diff --git a/arch/h8300/boot/Makefile b/arch/h8300/boot/Makefile index 65086d925ca..0bb62e064ee 100644 --- a/arch/h8300/boot/Makefile +++ b/arch/h8300/boot/Makefile @@ -1,12 +1,22 @@ # arch/h8300/boot/Makefile -targets := vmlinux.srec vmlinux.bin +targets := vmlinux.srec vmlinux.bin zImage +subdir- := compressed OBJCOPYFLAGS_vmlinux.srec := -Osrec OBJCOPYFLAGS_vmlinux.bin := -Obinary +OBJCOPYFLAGS_zImage := -O binary -R .note -R .comment -R .stab -R .stabstr -S $(obj)/vmlinux.srec $(obj)/vmlinux.bin: vmlinux FORCE $(call if_changed,objcopy) @echo ' Kernel: $@ is ready' +$(obj)/zImage: $(obj)/compressed/vmlinux FORCE + $(call if_changed,objcopy) + @echo 'Kernel: $@ is ready' + +$(obj)/compressed/vmlinux: FORCE + $(Q)$(MAKE) $(build)=$(obj)/compressed $@ + CLEAN_FILES += arch/$(ARCH)/vmlinux.bin arch/$(ARCH)/vmlinux.srec + diff --git a/arch/h8300/boot/compressed/Makefile b/arch/h8300/boot/compressed/Makefile new file mode 100644 index 00000000000..71aac82a8ae --- /dev/null +++ b/arch/h8300/boot/compressed/Makefile @@ -0,0 +1,37 @@ +# +# linux/arch/sh/boot/compressed/Makefile +# +# create a compressed vmlinux image from the original vmlinux +# + +targets := vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o piggy.o +EXTRA_AFLAGS := -traditional + +OBJECTS = $(obj)/head.o $(obj)/misc.o + +# +# IMAGE_OFFSET is the load offset of the compression loader +# Assign dummy values if these 2 variables are not defined, +# in order to suppress error message. +# +CONFIG_MEMORY_START ?= 0x00400000 +CONFIG_BOOT_LINK_OFFSET ?= 0x00400000 +IMAGE_OFFSET := $(shell printf "0x%08x" $$[$(CONFIG_MEMORY_START)+$(CONFIG_BOOT_LINK_OFFSET)]) + +LDFLAGS_vmlinux := -T $(obj)/vmlinux.lds + +$(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o FORCE + $(call if_changed,ld) + @: + +$(obj)/vmlinux.bin: vmlinux FORCE + $(call if_changed,objcopy) + +$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE + $(call if_changed,gzip) + +LDFLAGS_piggy.o := -r --format binary --oformat elf32-h8300 -T +OBJCOPYFLAGS := -O binary + +$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE + $(call if_changed,ld) diff --git a/arch/h8300/boot/compressed/head.S b/arch/h8300/boot/compressed/head.S new file mode 100644 index 00000000000..b8e90d12d19 --- /dev/null +++ b/arch/h8300/boot/compressed/head.S @@ -0,0 +1,47 @@ +/* + * linux/arch/h8300/boot/compressed/head.S + * + * Copyright (C) 2006 Yoshinori Sato + */ + +.h8300h +#include <linux/linkage.h> + +#define SRAM_START 0xff4000 + + .section .text.startup + .global startup +startup: + mov.l #SRAM_START+0x8000, sp + mov.l #__sbss, er0 + mov.l #__ebss, er1 + sub.l er0, er1 + shlr er1 + shlr er1 + sub.l er2, er2 +1: + mov.l er2, @er0 + adds #4, er0 + dec.l #1, er1 + bne 1b + jsr @_decompress_kernel + jmp @0x400000 + + .align 9 +fake_headers_as_bzImage: + .word 0 + .ascii "HdrS" ; header signature + .word 0x0202 ; header version number (>= 0x0105) + ; or else old loadlin-1.5 will fail) + .word 0 ; default_switch + .word 0 ; SETUPSEG + .word 0x1000 + .word 0 ; pointing to kernel version string + .byte 0 ; = 0, old one (LILO, Loadlin, + ; 0xTV: T=0 for LILO + ; V = version + .byte 1 ; Load flags bzImage=1 + .word 0x8000 ; size to move, when setup is not + .long 0x100000 ; 0x100000 = default for big kernel + .long 0 ; address of loaded ramdisk image + .long 0 ; its size in bytes diff --git a/arch/h8300/boot/compressed/misc.c b/arch/h8300/boot/compressed/misc.c new file mode 100644 index 00000000000..845074588af --- /dev/null +++ b/arch/h8300/boot/compressed/misc.c @@ -0,0 +1,219 @@ +/* + * arch/h8300/boot/compressed/misc.c + * + * This is a collection of several routines from gzip-1.0.3 + * adapted for Linux. + * + * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994 + * + * Adapted for h8300 by Yoshinori Sato 2006 + */ + +#include <asm/uaccess.h> + +/* + * gzip declarations + */ + +#define OF(args) args +#define STATIC static + +#undef memset +#undef memcpy +#define memzero(s, n) memset ((s), 0, (n)) + +typedef unsigned char uch; +typedef unsigned short ush; +typedef unsigned long ulg; + +#define WSIZE 0x8000 /* Window size must be at least 32k, */ + /* and a power of two */ + +static uch *inbuf; /* input buffer */ +static uch window[WSIZE]; /* Sliding window buffer */ + +static unsigned insize = 0; /* valid bytes in inbuf */ +static unsigned inptr = 0; /* index of next byte to be processed in inbuf */ +static unsigned outcnt = 0; /* bytes in output buffer */ + +/* gzip flag byte */ +#define ASCII_FLAG 0x01 /* bit 0 set: file probably ASCII text */ +#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */ +#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */ +#define ORIG_NAME 0x08 /* bit 3 set: original file name present */ +#define COMMENT 0x10 /* bit 4 set: file comment present */ +#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */ +#define RESERVED 0xC0 /* bit 6,7: reserved */ + +#define get_byte() (inptr < insize ? inbuf[inptr++] : fill_inbuf()) + +/* Diagnostic functions */ +#ifdef DEBUG +# define Assert(cond,msg) {if(!(cond)) error(msg);} +# define Trace(x) fprintf x +# define Tracev(x) {if (verbose) fprintf x ;} +# define Tracevv(x) {if (verbose>1) fprintf x ;} +# define Tracec(c,x) {if (verbose && (c)) fprintf x ;} +# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;} +#else +# define Assert(cond,msg) +# define Trace(x) +# define Tracev(x) +# define Tracevv(x) +# define Tracec(c,x) +# define Tracecv(c,x) +#endif + +static int fill_inbuf(void); +static void flush_window(void); +static void error(char *m); +static void gzip_mark(void **); +static void gzip_release(void **); + +extern char input_data[]; +extern int input_len; + +static long bytes_out = 0; +static uch *output_data; +static unsigned long output_ptr = 0; + +static void *malloc(int size); +static void free(void *where); +static void error(char *m); +static void gzip_mark(void **); +static void gzip_release(void **); + +int puts(const char *); + +extern int _text; /* Defined in vmlinux.lds.S */ +extern int _end; +static unsigned long free_mem_ptr; +static unsigned long free_mem_end_ptr; + +#define HEAP_SIZE 0x10000 + +#include "../../../../lib/inflate.c" + +#define SCR *((volatile unsigned char *)0xffff8a) +#define TDR *((volatile unsigned char *)0xffff8b) +#define SSR *((volatile unsigned char *)0xffff8c) + +static void *malloc(int size) +{ + void *p; + + if (size <0) error("Malloc error"); + if (free_mem_ptr == 0) error("Memory error"); + + free_mem_ptr = (free_mem_ptr + 3) & ~3; /* Align */ + + p = (void *)free_mem_ptr; + free_mem_ptr += size; + + if (free_mem_ptr >= free_mem_end_ptr) + error("Out of memory"); + + return p; +} + +static void free(void *where) +{ /* Don't care */ +} + +static void gzip_mark(void **ptr) +{ + *ptr = (void *) free_mem_ptr; +} + +static void gzip_release(void **ptr) +{ + free_mem_ptr = (long) *ptr; +} + +int puts(const char *s) +{ + return 0; +} + +void* memset(void* s, int c, size_t n) +{ + int i; + char *ss = (char*)s; + + for (i=0;i<n;i++) ss[i] = c; + return s; +} + +void* memcpy(void* __dest, __const void* __src, + size_t __n) +{ + int i; + char *d = (char *)__dest, *s = (char *)__src; + + for (i=0;i<__n;i++) d[i] = s[i]; + return __dest; +} + +/* =========================================================================== + * Fill the input buffer. This is called only when the buffer is empty + * and at least one byte is really needed. + */ +static int fill_inbuf(void) +{ + if (insize != 0) { + error("ran out of input data"); + } + + inbuf = input_data; + insize = input_len; + inptr = 1; + return inbuf[0]; +} + +/* =========================================================================== + * Write the output window window[0..outcnt-1] and update crc and bytes_out. + * (Used for the decompressed data only.) + */ +static void flush_window(void) +{ + ulg c = crc; /* temporary variable */ + unsigned n; + uch *in, *out, ch; + + in = window; + out = &output_data[output_ptr]; + for (n = 0; n < outcnt; n++) { + ch = *out++ = *in++; + c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8); + } + crc = c; + bytes_out += (ulg)outcnt; + output_ptr += (ulg)outcnt; + outcnt = 0; +} + +static void error(char *x) +{ + puts("\n\n"); + puts(x); + puts("\n\n -- System halted"); + + while(1); /* Halt */ +} + +#define STACK_SIZE (4096) +long user_stack [STACK_SIZE]; +long* stack_start = &user_stack[STACK_SIZE]; + +void decompress_kernel(void) +{ + output_data = 0; + output_ptr = (unsigned long)0x400000; + free_mem_ptr = (unsigned long)&_end; + free_mem_end_ptr = free_mem_ptr + HEAP_SIZE; + + makecrc(); + puts("Uncompressing Linux... "); + gunzip(); + puts("Ok, booting the kernel.\n"); +} diff --git a/arch/h8300/kernel/Makefile b/arch/h8300/kernel/Makefile index 4edbc2ef6ca..ccc1a7fbf94 100644 --- a/arch/h8300/kernel/Makefile +++ b/arch/h8300/kernel/Makefile @@ -4,10 +4,8 @@ extra-y := vmlinux.lds -obj-y := process.o traps.o ptrace.o ints.o \ +obj-y := process.o traps.o ptrace.o irq.o \ sys_h8300.o time.o semaphore.o signal.o \ - setup.o gpio.o init_task.o syscalls.o devres.o - -devres-y = ../../../kernel/irq/devres.o + setup.o gpio.o init_task.o syscalls.o obj-$(CONFIG_MODULES) += module.o h8300_ksyms.o diff --git a/arch/h8300/kernel/irq.c b/arch/h8300/kernel/irq.c new file mode 100644 index 00000000000..43d21e93f41 --- /dev/null +++ b/arch/h8300/kernel/irq.c @@ -0,0 +1,211 @@ +/* + * linux/arch/h8300/kernel/irq.c + * + * Copyright 2007 Yoshinori Sato <ysato@users.sourceforge.jp> + */ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/kernel_stat.h> +#include <linux/seq_file.h> +#include <linux/init.h> +#include <linux/random.h> +#include <linux/bootmem.h> +#include <linux/irq.h> + +#include <asm/system.h> +#include <asm/traps.h> +#include <asm/io.h> +#include <asm/setup.h> +#include <asm/errno.h> + +/*#define DEBUG*/ + +extern unsigned long *interrupt_redirect_table; +extern const int h8300_saved_vectors[]; +extern const unsigned long h8300_trap_table[]; +int h8300_enable_irq_pin(unsigned int irq); +void h8300_disable_irq_pin(unsigned int irq); + +#define CPU_VECTOR ((unsigned long *)0x000000) +#define ADDR_MASK (0xffffff) + +static inline int is_ext_irq(unsigned int irq) +{ + return (irq >= EXT_IRQ0 && irq <= (EXT_IRQ0 + EXT_IRQS)); +} + +static void h8300_enable_irq(unsigned int irq) +{ + if (is_ext_irq(irq)) + IER_REGS |= 1 << (irq - EXT_IRQ0); +} + +static void h8300_disable_irq(unsigned int irq) +{ + if (is_ext_irq(irq)) + IER_REGS &= ~(1 << (irq - EXT_IRQ0)); +} + +static void h8300_end_irq(unsigned int irq) +{ +} + +static unsigned int h8300_startup_irq(unsigned int irq) +{ + if (is_ext_irq(irq)) + return h8300_enable_irq_pin(irq); + else + return 0; +} + +static void h8300_shutdown_irq(unsigned int irq) +{ + if (is_ext_irq(irq)) + h8300_disable_irq_pin(irq); +} + +/* + * h8300 interrupt controler implementation + */ +struct irq_chip h8300irq_chip = { + .name = "H8300-INTC", + .startup = h8300_startup_irq, + .shutdown = h8300_shutdown_irq, + .enable = h8300_enable_irq, + .disable = h8300_disable_irq, + .ack = NULL, + .end = h8300_end_irq, +}; + +void ack_bad_irq(unsigned int irq) +{ + printk("unexpected IRQ trap at vector %02x\n", irq); +} + +#if defined(CONFIG_RAMKERNEL) +static unsigned long __init *get_vector_address(void) +{ + unsigned long *rom_vector = CPU_VECTOR; + unsigned long base,tmp; + int vec_no; + + base = rom_vector[EXT_IRQ0] & ADDR_MASK; + + /* check romvector format */ + for (vec_no = EXT_IRQ1; vec_no <= EXT_IRQ0+EXT_IRQS; vec_no++) { + if ((base+(vec_no - EXT_IRQ0)*4) != (rom_vector[vec_no] & ADDR_MASK)) + return NULL; + } + + /* ramvector base address */ + base -= EXT_IRQ0*4; + + /* writerble check */ + tmp = ~(*(volatile unsigned long *)base); + (*(volatile unsigned long *)base) = tmp; + if ((*(volatile unsigned long *)base) != tmp) + return NULL; + return (unsigned long *)base; +} + +static void __init setup_vector(void) +{ + int i; + unsigned long *ramvec,*ramvec_p; + const unsigned long *trap_entry; + const int *saved_vector; + + ramvec = get_vector_address(); + if (ramvec == NULL) + panic("interrupt vector serup failed."); + else + printk(KERN_INFO "virtual vector at 0x%08lx\n",(unsigned long)ramvec); + + /* create redirect table */ + ramvec_p = ramvec; + trap_entry = h8300_trap_table; + saved_vector = h8300_saved_vectors; + for ( i = 0; i < NR_IRQS; i++) { + if (i == *saved_vector) { + ramvec_p++; + saved_vector++; + } else { + if ( i < NR_TRAPS ) { + if (*trap_entry) + *ramvec_p = VECTOR(*trap_entry); + ramvec_p++; + trap_entry++; + } else + *ramvec_p++ = REDIRECT(interrupt_entry); + } + } + interrupt_redirect_table = ramvec; +#ifdef DEBUG + ramvec_p = ramvec; + for (i = 0; i < NR_IRQS; i++) { + if ((i % 8) == 0) + printk(KERN_DEBUG "\n%p: ",ramvec_p); + printk(KERN_DEBUG "%p ",*ramvec_p); + ramvec_p++; + } + printk(KERN_DEBUG "\n"); +#endif +} +#else +#define setup_vector() do { } while(0) +#endif + +void __init init_IRQ(void) +{ + int c; + + setup_vector(); + + for (c = 0; c < NR_IRQS; c++) { + irq_desc[c].status = IRQ_DISABLED; + irq_desc[c].action = NULL; + irq_desc[c].depth = 1; + irq_desc[c].chip = &h8300irq_chip; + } +} + +asmlinkage void do_IRQ(int irq) +{ + irq_enter(); + __do_IRQ(irq); + irq_exit(); +} + +#if defined(CONFIG_PROC_FS) +int show_interrupts(struct seq_file *p, void *v) +{ + int i = *(loff_t *) v, j; + struct irqaction * action; + unsigned long flags; + + if (i == 0) + seq_puts(p, " CPU0"); + + if (i < NR_IRQS) { + spin_lock_irqsave(&irq_desc[i].lock, flags); + action = irq_desc[i].action; + if (!action) + goto unlock; + seq_printf(p, "%3d: ",i); + seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]); + seq_printf(p, " %14s", irq_desc[i].chip->name); + seq_printf(p, "-%-8s", irq_desc[i].name); + seq_printf(p, " %s", action->name); + + for (action=action->next; action; action = action->next) + seq_printf(p, ", %s", action->name); + seq_putc(p, '\n'); +unlock: + spin_unlock_irqrestore(&irq_desc[i].lock, flags); + } + return 0; +} +#endif diff --git a/arch/h8300/kernel/ptrace.c b/arch/h8300/kernel/ptrace.c index f6031373dc2..8f2411db7ea 100644 --- a/arch/h8300/kernel/ptrace.c +++ b/arch/h8300/kernel/ptrace.c @@ -19,7 +19,6 @@ #include <linux/sched.h> #include <linux/mm.h> #include <linux/smp.h> -#include <linux/smp_lock.h> #include <linux/errno.h> #include <linux/ptrace.h> #include <linux/user.h> diff --git a/arch/h8300/kernel/setup.c b/arch/h8300/kernel/setup.c index 313cd808104..b2e86d0255e 100644 --- a/arch/h8300/kernel/setup.c +++ b/arch/h8300/kernel/setup.c @@ -33,10 +33,7 @@ #include <asm/setup.h> #include <asm/irq.h> - -#ifdef CONFIG_BLK_DEV_INITRD #include <asm/pgtable.h> -#endif #if defined(__H8300H__) #define CPU "H8/300H" diff --git a/arch/h8300/kernel/sys_h8300.c b/arch/h8300/kernel/sys_h8300.c index 302a2dfe634..11ba75a0522 100644 --- a/arch/h8300/kernel/sys_h8300.c +++ b/arch/h8300/kernel/sys_h8300.c @@ -10,7 +10,6 @@ #include <linux/sched.h> #include <linux/mm.h> #include <linux/smp.h> -#include <linux/smp_lock.h> #include <linux/sem.h> #include <linux/msg.h> #include <linux/shm.h> diff --git a/arch/h8300/kernel/time.c b/arch/h8300/kernel/time.c index d1ef615ba89..330638220a2 100644 --- a/arch/h8300/kernel/time.c +++ b/arch/h8300/kernel/time.c @@ -44,7 +44,7 @@ static void timer_interrupt(int irq, void *dummy, struct pt_regs * regs) #ifndef CONFIG_SMP update_process_times(user_mode(regs)); #endif - profile_tick(CPU_PROFILING, regs); + profile_tick(CPU_PROFILING); } void time_init(void) @@ -66,55 +66,3 @@ void time_init(void) platform_timer_setup(timer_interrupt); } - -/* - * This version of gettimeofday has near microsecond resolution. - */ -void do_gettimeofday(struct timeval *tv) -{ - unsigned long flags; - unsigned long usec, sec; - - read_lock_irqsave(&xtime_lock, flags); - usec = 0; - sec = xtime.tv_sec; - usec += (xtime.tv_nsec / 1000); - read_unlock_irqrestore(&xtime_lock, flags); - - while (usec >= 1000000) { - usec -= 1000000; - sec++; - } - - tv->tv_sec = sec; - tv->tv_usec = usec; -} - -EXPORT_SYMBOL(do_gettimeofday); - -int do_settimeofday(struct timespec *tv) -{ - if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC) - return -EINVAL; - - write_lock_irq(&xtime_lock); - /* This is revolting. We need to set the xtime.tv_usec - * correctly. However, the value in this location is - * is value at the last tick. - * Discover what correction gettimeofday - * would have done, and then undo it! - */ - while (tv->tv_nsec < 0) { - tv->tv_nsec += NSEC_PER_SEC; - tv->tv_sec--; - } - - xtime.tv_sec = tv->tv_sec; - xtime.tv_nsec = tv->tv_nsec; - ntp_clear(); - write_sequnlock_irq(&xtime_lock); - clock_was_set(); - return 0; -} - -EXPORT_SYMBOL(do_settimeofday); diff --git a/arch/h8300/mm/kmap.c b/arch/h8300/mm/kmap.c index 26ab17286a5..5c7af09ae8d 100644 --- a/arch/h8300/mm/kmap.c +++ b/arch/h8300/mm/kmap.c @@ -24,12 +24,14 @@ #undef DEBUG +#define VIRT_OFFSET (0x01000000) + /* * Map some physical address range into the kernel address space. */ void *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag) { - return (void *)physaddr; + return (void *)(physaddr + VIRT_OFFSET); } /* diff --git a/arch/h8300/platform/h8300h/Makefile b/arch/h8300/platform/h8300h/Makefile index 5d42c772f75..b24ea08aa0a 100644 --- a/arch/h8300/platform/h8300h/Makefile +++ b/arch/h8300/platform/h8300h/Makefile @@ -4,4 +4,4 @@ # Reuse any files we can from the H8/300H # -obj-y := entry.o ints_h8300h.o ptrace_h8300h.o +obj-y := entry.o irq_pin.o ptrace_h8300h.o diff --git a/arch/h8300/platform/h8300h/entry.S b/arch/h8300/platform/h8300h/entry.S index d2dea2432fb..f86ac3b5d4d 100644 --- a/arch/h8300/platform/h8300h/entry.S +++ b/arch/h8300/platform/h8300h/entry.S @@ -30,12 +30,12 @@ mov.l er0,@-sp stc ccr,r0l /* check kernel mode */ - orc #0x10,ccr btst #4,r0l bne 5f mov.l sp,@SYMBOL_NAME(sw_usp) /* user mode */ mov.l @sp,er0 + orc #0x10,ccr mov.l @SYMBOL_NAME(sw_ksp),sp sub.l #(LRET-LORIG),sp /* allocate LORIG - LRET */ mov.l er0,@-sp @@ -165,7 +165,7 @@ SYMBOL_NAME_LABEL(interrupt_entry) dec.l #1,er0 mov.l sp,er1 subs #4,er1 /* adjust ret_pc */ - jsr @SYMBOL_NAME(process_int) + jsr @SYMBOL_NAME(do_IRQ) mov.l @SYMBOL_NAME(irq_stat)+CPUSTAT_SOFTIRQ_PENDING,er0 beq 1f jsr @SYMBOL_NAME(do_softirq) diff --git a/arch/h8300/platform/h8300h/generic/Makefile b/arch/h8300/platform/h8300h/generic/Makefile index b6ea7688a61..32b964a9010 100644 --- a/arch/h8300/platform/h8300h/generic/Makefile +++ b/arch/h8300/platform/h8300h/generic/Makefile @@ -2,5 +2,5 @@ # Makefile for the linux kernel. # +extra-y := crt0_$(MODEL).o obj-y := timer.o -extra-y = crt0_$(MODEL).o diff --git a/arch/h8300/platform/h8300h/ints_h8300h.c b/arch/h8300/platform/h8300h/ints_h8300h.c deleted file mode 100644 index f1777119b87..00000000000 --- a/arch/h8300/platform/h8300h/ints_h8300h.c +++ /dev/null @@ -1,85 +0,0 @@ -/* - * linux/arch/h8300/platform/h8300h/ints_h8300h.c - * Interrupt handling CPU variants - * - * Yoshinori Sato <ysato@users.sourceforge.jp> - * - */ - -#include <linux/init.h> -#include <linux/errno.h> - -#include <asm/ptrace.h> -#include <asm/traps.h> -#include <asm/irq.h> -#include <asm/io.h> -#include <asm/gpio.h> -#include <asm/regs306x.h> - -/* saved vector list */ -const int __initdata h8300_saved_vectors[]={ -#if defined(CONFIG_GDB_DEBUG) - TRAP3_VEC, -#endif - -1 -}; - -/* trap entry table */ -const unsigned long __initdata h8300_trap_table[NR_TRAPS]={ - 0,0,0,0,0,0,0,0, - (unsigned long)system_call, /* TRAPA #0 */ - 0,0, - (unsigned long)trace_break, /* TRAPA #3 */ -}; - -int h8300_enable_irq_pin(unsigned int irq) -{ - int bitmask; - if (irq < EXT_IRQ0 || irq > EXT_IRQ5) - return 0; - - /* initialize IRQ pin */ - bitmask = 1 << (irq - EXT_IRQ0); - switch(irq) { - case EXT_IRQ0: - case EXT_IRQ1: - case EXT_IRQ2: - case EXT_IRQ3: - if (H8300_GPIO_RESERVE(H8300_GPIO_P8, bitmask) == 0) - return -EBUSY; - H8300_GPIO_DDR(H8300_GPIO_P8, bitmask, H8300_GPIO_INPUT); - break; - case EXT_IRQ4: - case EXT_IRQ5: - if (H8300_GPIO_RESERVE(H8300_GPIO_P9, bitmask) == 0) - return -EBUSY; - H8300_GPIO_DDR(H8300_GPIO_P9, bitmask, H8300_GPIO_INPUT); - break; - } - - return 0; -} - -void h8300_disable_irq_pin(unsigned int irq) -{ - int bitmask; - if (irq < EXT_IRQ0 || irq > EXT_IRQ5) - return; - - /* disable interrupt & release IRQ pin */ - bitmask = 1 << (irq - EXT_IRQ0); - switch(irq) { - case EXT_IRQ0: - case EXT_IRQ1: - case EXT_IRQ2: - case EXT_IRQ3: - *(volatile unsigned char *)IER &= ~bitmask; - H8300_GPIO_FREE(H8300_GPIO_P8, bitmask); - break ; - case EXT_IRQ4: - case EXT_IRQ5: - *(volatile unsigned char *)IER &= ~bitmask; - H8300_GPIO_FREE(H8300_GPIO_P9, bitmask); - break; - } -} diff --git a/arch/h8300/platform/h8s/entry.S b/arch/h8300/platform/h8s/entry.S index aeb2e9faa9b..f3d6b8e8f95 100644 --- a/arch/h8300/platform/h8s/entry.S +++ b/arch/h8300/platform/h8s/entry.S @@ -31,12 +31,13 @@ mov.l er0,@-sp stc ccr,r0l /* check kernel mode */ - orc #0x10,ccr btst #4,r0l bne 5f - mov.l sp,@SYMBOL_NAME(sw_usp) /* user mode */ - mov.l @sp,er0 + /* user mode */ + mov.l sp,@SYMBOL_NAME(sw_usp) + mov.l @sp,er0 /* restore saved er0 */ + orc #0x10,ccr /* switch kernel stack */ mov.l @SYMBOL_NAME(sw_ksp),sp sub.l #(LRET-LORIG),sp /* allocate LORIG - LRET */ stm.l er0-er3,@-sp @@ -55,8 +56,9 @@ mov.l er0,@(LER0-LER3:16,sp) /* copy ER0 */ bra 6f 5: - mov.l @sp,er0 /* kernel mode */ - subs #2,sp /* dummy ccr */ + /* kernel mode */ + mov.l @sp,er0 /* restore saved er0 */ + subs #2,sp /* set dummy ccr */ stm.l er0-er3,@-sp mov.w @(LRET-LER3:16,sp),r1 /* copy old ccr */ mov.b r1h,r1l @@ -94,6 +96,7 @@ mov.l @sp+,er1 add.l #(LRET-LER1),sp /* remove LORIG - LRET */ mov.l sp,@SYMBOL_NAME(sw_ksp) + andc #0xef,ccr /* switch to user mode */ mov.l er0,sp bra 8f 7: @@ -173,9 +176,6 @@ SYMBOL_NAME_LABEL(interrupt_entry) SYMBOL_NAME_LABEL(system_call) subs #4,sp /* dummy LVEC */ SAVE_ALL - mov.w @(LCCR:16,sp),r1 - bset #4,r1l - ldc r1l,ccr /* restore ccr */ mov.l er0,er4 mov.l #-ENOSYS,er0 mov.l er0,@(LER0:16,sp) @@ -198,6 +198,7 @@ SYMBOL_NAME_LABEL(system_call) mov.l @(LER1:16,sp),er0 mov.l @(LER2:16,sp),er1 mov.l @(LER3:16,sp),er2 + andc #0x7f,ccr jsr @er4 mov.l er0,@(LER0:16,sp) /* save the return value */ #if defined(CONFIG_SYSCALL_PRINT) |