summaryrefslogtreecommitdiffstats
path: root/arch/i386/kernel/acpi/boot.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/i386/kernel/acpi/boot.c')
-rw-r--r--arch/i386/kernel/acpi/boot.c908
1 files changed, 908 insertions, 0 deletions
diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c
new file mode 100644
index 00000000000..9ba0b957d11
--- /dev/null
+++ b/arch/i386/kernel/acpi/boot.c
@@ -0,0 +1,908 @@
+/*
+ * boot.c - Architecture-Specific Low-Level ACPI Boot Support
+ *
+ * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
+ * Copyright (C) 2001 Jun Nakajima <jun.nakajima@intel.com>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#include <linux/init.h>
+#include <linux/config.h>
+#include <linux/acpi.h>
+#include <linux/efi.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+
+#include <asm/pgtable.h>
+#include <asm/io_apic.h>
+#include <asm/apic.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mpspec.h>
+
+#ifdef CONFIG_X86_64
+
+static inline void acpi_madt_oem_check(char *oem_id, char *oem_table_id) { }
+extern void __init clustered_apic_check(void);
+static inline int ioapic_setup_disabled(void) { return 0; }
+#include <asm/proto.h>
+
+#else /* X86 */
+
+#ifdef CONFIG_X86_LOCAL_APIC
+#include <mach_apic.h>
+#include <mach_mpparse.h>
+#endif /* CONFIG_X86_LOCAL_APIC */
+
+#endif /* X86 */
+
+#define BAD_MADT_ENTRY(entry, end) ( \
+ (!entry) || (unsigned long)entry + sizeof(*entry) > end || \
+ ((acpi_table_entry_header *)entry)->length != sizeof(*entry))
+
+#define PREFIX "ACPI: "
+
+#ifdef CONFIG_ACPI_PCI
+int acpi_noirq __initdata; /* skip ACPI IRQ initialization */
+int acpi_pci_disabled __initdata; /* skip ACPI PCI scan and IRQ initialization */
+#else
+int acpi_noirq __initdata = 1;
+int acpi_pci_disabled __initdata = 1;
+#endif
+int acpi_ht __initdata = 1; /* enable HT */
+
+int acpi_lapic;
+int acpi_ioapic;
+int acpi_strict;
+EXPORT_SYMBOL(acpi_strict);
+
+acpi_interrupt_flags acpi_sci_flags __initdata;
+int acpi_sci_override_gsi __initdata;
+int acpi_skip_timer_override __initdata;
+
+#ifdef CONFIG_X86_LOCAL_APIC
+static u64 acpi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE;
+#endif
+
+#ifndef __HAVE_ARCH_CMPXCHG
+#warning ACPI uses CMPXCHG, i486 and later hardware
+#endif
+
+#define MAX_MADT_ENTRIES 256
+u8 x86_acpiid_to_apicid[MAX_MADT_ENTRIES] =
+ { [0 ... MAX_MADT_ENTRIES-1] = 0xff };
+EXPORT_SYMBOL(x86_acpiid_to_apicid);
+
+/* --------------------------------------------------------------------------
+ Boot-time Configuration
+ -------------------------------------------------------------------------- */
+
+/*
+ * The default interrupt routing model is PIC (8259). This gets
+ * overriden if IOAPICs are enumerated (below).
+ */
+enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_PIC;
+
+#ifdef CONFIG_X86_64
+
+/* rely on all ACPI tables being in the direct mapping */
+char *__acpi_map_table(unsigned long phys_addr, unsigned long size)
+{
+ if (!phys_addr || !size)
+ return NULL;
+
+ if (phys_addr < (end_pfn_map << PAGE_SHIFT))
+ return __va(phys_addr);
+
+ return NULL;
+}
+
+#else
+
+/*
+ * Temporarily use the virtual area starting from FIX_IO_APIC_BASE_END,
+ * to map the target physical address. The problem is that set_fixmap()
+ * provides a single page, and it is possible that the page is not
+ * sufficient.
+ * By using this area, we can map up to MAX_IO_APICS pages temporarily,
+ * i.e. until the next __va_range() call.
+ *
+ * Important Safety Note: The fixed I/O APIC page numbers are *subtracted*
+ * from the fixed base. That's why we start at FIX_IO_APIC_BASE_END and
+ * count idx down while incrementing the phys address.
+ */
+char *__acpi_map_table(unsigned long phys, unsigned long size)
+{
+ unsigned long base, offset, mapped_size;
+ int idx;
+
+ if (phys + size < 8*1024*1024)
+ return __va(phys);
+
+ offset = phys & (PAGE_SIZE - 1);
+ mapped_size = PAGE_SIZE - offset;
+ set_fixmap(FIX_ACPI_END, phys);
+ base = fix_to_virt(FIX_ACPI_END);
+
+ /*
+ * Most cases can be covered by the below.
+ */
+ idx = FIX_ACPI_END;
+ while (mapped_size < size) {
+ if (--idx < FIX_ACPI_BEGIN)
+ return NULL; /* cannot handle this */
+ phys += PAGE_SIZE;
+ set_fixmap(idx, phys);
+ mapped_size += PAGE_SIZE;
+ }
+
+ return ((unsigned char *) base + offset);
+}
+#endif
+
+#ifdef CONFIG_PCI_MMCONFIG
+static int __init acpi_parse_mcfg(unsigned long phys_addr, unsigned long size)
+{
+ struct acpi_table_mcfg *mcfg;
+
+ if (!phys_addr || !size)
+ return -EINVAL;
+
+ mcfg = (struct acpi_table_mcfg *) __acpi_map_table(phys_addr, size);
+ if (!mcfg) {
+ printk(KERN_WARNING PREFIX "Unable to map MCFG\n");
+ return -ENODEV;
+ }
+
+ if (mcfg->base_reserved) {
+ printk(KERN_ERR PREFIX "MMCONFIG not in low 4GB of memory\n");
+ return -ENODEV;
+ }
+
+ pci_mmcfg_base_addr = mcfg->base_address;
+
+ return 0;
+}
+#else
+#define acpi_parse_mcfg NULL
+#endif /* !CONFIG_PCI_MMCONFIG */
+
+#ifdef CONFIG_X86_LOCAL_APIC
+static int __init
+acpi_parse_madt (
+ unsigned long phys_addr,
+ unsigned long size)
+{
+ struct acpi_table_madt *madt = NULL;
+
+ if (!phys_addr || !size)
+ return -EINVAL;
+
+ madt = (struct acpi_table_madt *) __acpi_map_table(phys_addr, size);
+ if (!madt) {
+ printk(KERN_WARNING PREFIX "Unable to map MADT\n");
+ return -ENODEV;
+ }
+
+ if (madt->lapic_address) {
+ acpi_lapic_addr = (u64) madt->lapic_address;
+
+ printk(KERN_DEBUG PREFIX "Local APIC address 0x%08x\n",
+ madt->lapic_address);
+ }
+
+ acpi_madt_oem_check(madt->header.oem_id, madt->header.oem_table_id);
+
+ return 0;
+}
+
+
+static int __init
+acpi_parse_lapic (
+ acpi_table_entry_header *header, const unsigned long end)
+{
+ struct acpi_table_lapic *processor = NULL;
+
+ processor = (struct acpi_table_lapic*) header;
+
+ if (BAD_MADT_ENTRY(processor, end))
+ return -EINVAL;
+
+ acpi_table_print_madt_entry(header);
+
+ /* no utility in registering a disabled processor */
+ if (processor->flags.enabled == 0)
+ return 0;
+
+ x86_acpiid_to_apicid[processor->acpi_id] = processor->id;
+
+ mp_register_lapic (
+ processor->id, /* APIC ID */
+ processor->flags.enabled); /* Enabled? */
+
+ return 0;
+}
+
+static int __init
+acpi_parse_lapic_addr_ovr (
+ acpi_table_entry_header *header, const unsigned long end)
+{
+ struct acpi_table_lapic_addr_ovr *lapic_addr_ovr = NULL;
+
+ lapic_addr_ovr = (struct acpi_table_lapic_addr_ovr*) header;
+
+ if (BAD_MADT_ENTRY(lapic_addr_ovr, end))
+ return -EINVAL;
+
+ acpi_lapic_addr = lapic_addr_ovr->address;
+
+ return 0;
+}
+
+static int __init
+acpi_parse_lapic_nmi (
+ acpi_table_entry_header *header, const unsigned long end)
+{
+ struct acpi_table_lapic_nmi *lapic_nmi = NULL;
+
+ lapic_nmi = (struct acpi_table_lapic_nmi*) header;
+
+ if (BAD_MADT_ENTRY(lapic_nmi, end))
+ return -EINVAL;
+
+ acpi_table_print_madt_entry(header);
+
+ if (lapic_nmi->lint != 1)
+ printk(KERN_WARNING PREFIX "NMI not connected to LINT 1!\n");
+
+ return 0;
+}
+
+
+#endif /*CONFIG_X86_LOCAL_APIC*/
+
+#if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_ACPI_INTERPRETER)
+
+static int __init
+acpi_parse_ioapic (
+ acpi_table_entry_header *header, const unsigned long end)
+{
+ struct acpi_table_ioapic *ioapic = NULL;
+
+ ioapic = (struct acpi_table_ioapic*) header;
+
+ if (BAD_MADT_ENTRY(ioapic, end))
+ return -EINVAL;
+
+ acpi_table_print_madt_entry(header);
+
+ mp_register_ioapic (
+ ioapic->id,
+ ioapic->address,
+ ioapic->global_irq_base);
+
+ return 0;
+}
+
+/*
+ * Parse Interrupt Source Override for the ACPI SCI
+ */
+static void
+acpi_sci_ioapic_setup(u32 gsi, u16 polarity, u16 trigger)
+{
+ if (trigger == 0) /* compatible SCI trigger is level */
+ trigger = 3;
+
+ if (polarity == 0) /* compatible SCI polarity is low */
+ polarity = 3;
+
+ /* Command-line over-ride via acpi_sci= */
+ if (acpi_sci_flags.trigger)
+ trigger = acpi_sci_flags.trigger;
+
+ if (acpi_sci_flags.polarity)
+ polarity = acpi_sci_flags.polarity;
+
+ /*
+ * mp_config_acpi_legacy_irqs() already setup IRQs < 16
+ * If GSI is < 16, this will update its flags,
+ * else it will create a new mp_irqs[] entry.
+ */
+ mp_override_legacy_irq(gsi, polarity, trigger, gsi);
+
+ /*
+ * stash over-ride to indicate we've been here
+ * and for later update of acpi_fadt
+ */
+ acpi_sci_override_gsi = gsi;
+ return;
+}
+
+static int __init
+acpi_parse_int_src_ovr (
+ acpi_table_entry_header *header, const unsigned long end)
+{
+ struct acpi_table_int_src_ovr *intsrc = NULL;
+
+ intsrc = (struct acpi_table_int_src_ovr*) header;
+
+ if (BAD_MADT_ENTRY(intsrc, end))
+ return -EINVAL;
+
+ acpi_table_print_madt_entry(header);
+
+ if (intsrc->bus_irq == acpi_fadt.sci_int) {
+ acpi_sci_ioapic_setup(intsrc->global_irq,
+ intsrc->flags.polarity, intsrc->flags.trigger);
+ return 0;
+ }
+
+ if (acpi_skip_timer_override &&
+ intsrc->bus_irq == 0 && intsrc->global_irq == 2) {
+ printk(PREFIX "BIOS IRQ0 pin2 override ignored.\n");
+ return 0;
+ }
+
+ mp_override_legacy_irq (
+ intsrc->bus_irq,
+ intsrc->flags.polarity,
+ intsrc->flags.trigger,
+ intsrc->global_irq);
+
+ return 0;
+}
+
+
+static int __init
+acpi_parse_nmi_src (
+ acpi_table_entry_header *header, const unsigned long end)
+{
+ struct acpi_table_nmi_src *nmi_src = NULL;
+
+ nmi_src = (struct acpi_table_nmi_src*) header;
+
+ if (BAD_MADT_ENTRY(nmi_src, end))
+ return -EINVAL;
+
+ acpi_table_print_madt_entry(header);
+
+ /* TBD: Support nimsrc entries? */
+
+ return 0;
+}
+
+#endif /* CONFIG_X86_IO_APIC */
+
+#ifdef CONFIG_ACPI_BUS
+
+/*
+ * acpi_pic_sci_set_trigger()
+ *
+ * use ELCR to set PIC-mode trigger type for SCI
+ *
+ * If a PIC-mode SCI is not recognized or gives spurious IRQ7's
+ * it may require Edge Trigger -- use "acpi_sci=edge"
+ *
+ * Port 0x4d0-4d1 are ECLR1 and ECLR2, the Edge/Level Control Registers
+ * for the 8259 PIC. bit[n] = 1 means irq[n] is Level, otherwise Edge.
+ * ECLR1 is IRQ's 0-7 (IRQ 0, 1, 2 must be 0)
+ * ECLR2 is IRQ's 8-15 (IRQ 8, 13 must be 0)
+ */
+
+void __init
+acpi_pic_sci_set_trigger(unsigned int irq, u16 trigger)
+{
+ unsigned int mask = 1 << irq;
+ unsigned int old, new;
+
+ /* Real old ELCR mask */
+ old = inb(0x4d0) | (inb(0x4d1) << 8);
+
+ /*
+ * If we use ACPI to set PCI irq's, then we should clear ELCR
+ * since we will set it correctly as we enable the PCI irq
+ * routing.
+ */
+ new = acpi_noirq ? old : 0;
+
+ /*
+ * Update SCI information in the ELCR, it isn't in the PCI
+ * routing tables..
+ */
+ switch (trigger) {
+ case 1: /* Edge - clear */
+ new &= ~mask;
+ break;
+ case 3: /* Level - set */
+ new |= mask;
+ break;
+ }
+
+ if (old == new)
+ return;
+
+ printk(PREFIX "setting ELCR to %04x (from %04x)\n", new, old);
+ outb(new, 0x4d0);
+ outb(new >> 8, 0x4d1);
+}
+
+
+#endif /* CONFIG_ACPI_BUS */
+
+int acpi_gsi_to_irq(u32 gsi, unsigned int *irq)
+{
+#ifdef CONFIG_X86_IO_APIC
+ if (use_pci_vector() && !platform_legacy_irq(gsi))
+ *irq = IO_APIC_VECTOR(gsi);
+ else
+#endif
+ *irq = gsi;
+ return 0;
+}
+
+unsigned int acpi_register_gsi(u32 gsi, int edge_level, int active_high_low)
+{
+ unsigned int irq;
+ unsigned int plat_gsi = gsi;
+
+#ifdef CONFIG_PCI
+ /*
+ * Make sure all (legacy) PCI IRQs are set as level-triggered.
+ */
+ if (acpi_irq_model == ACPI_IRQ_MODEL_PIC) {
+ extern void eisa_set_level_irq(unsigned int irq);
+
+ if (edge_level == ACPI_LEVEL_SENSITIVE)
+ eisa_set_level_irq(gsi);
+ }
+#endif
+
+#ifdef CONFIG_X86_IO_APIC
+ if (acpi_irq_model == ACPI_IRQ_MODEL_IOAPIC) {
+ plat_gsi = mp_register_gsi(gsi, edge_level, active_high_low);
+ }
+#endif
+ acpi_gsi_to_irq(plat_gsi, &irq);
+ return irq;
+}
+EXPORT_SYMBOL(acpi_register_gsi);
+
+/*
+ * ACPI based hotplug support for CPU
+ */
+#ifdef CONFIG_ACPI_HOTPLUG_CPU
+int
+acpi_map_lsapic(acpi_handle handle, int *pcpu)
+{
+ /* TBD */
+ return -EINVAL;
+}
+EXPORT_SYMBOL(acpi_map_lsapic);
+
+
+int
+acpi_unmap_lsapic(int cpu)
+{
+ /* TBD */
+ return -EINVAL;
+}
+EXPORT_SYMBOL(acpi_unmap_lsapic);
+#endif /* CONFIG_ACPI_HOTPLUG_CPU */
+
+static unsigned long __init
+acpi_scan_rsdp (
+ unsigned long start,
+ unsigned long length)
+{
+ unsigned long offset = 0;
+ unsigned long sig_len = sizeof("RSD PTR ") - 1;
+
+ /*
+ * Scan all 16-byte boundaries of the physical memory region for the
+ * RSDP signature.
+ */
+ for (offset = 0; offset < length; offset += 16) {
+ if (strncmp((char *) (start + offset), "RSD PTR ", sig_len))
+ continue;
+ return (start + offset);
+ }
+
+ return 0;
+}
+
+static int __init acpi_parse_sbf(unsigned long phys_addr, unsigned long size)
+{
+ struct acpi_table_sbf *sb;
+
+ if (!phys_addr || !size)
+ return -EINVAL;
+
+ sb = (struct acpi_table_sbf *) __acpi_map_table(phys_addr, size);
+ if (!sb) {
+ printk(KERN_WARNING PREFIX "Unable to map SBF\n");
+ return -ENODEV;
+ }
+
+ sbf_port = sb->sbf_cmos; /* Save CMOS port */
+
+ return 0;
+}
+
+
+#ifdef CONFIG_HPET_TIMER
+
+static int __init acpi_parse_hpet(unsigned long phys, unsigned long size)
+{
+ struct acpi_table_hpet *hpet_tbl;
+
+ if (!phys || !size)
+ return -EINVAL;
+
+ hpet_tbl = (struct acpi_table_hpet *) __acpi_map_table(phys, size);
+ if (!hpet_tbl) {
+ printk(KERN_WARNING PREFIX "Unable to map HPET\n");
+ return -ENODEV;
+ }
+
+ if (hpet_tbl->addr.space_id != ACPI_SPACE_MEM) {
+ printk(KERN_WARNING PREFIX "HPET timers must be located in "
+ "memory.\n");
+ return -1;
+ }
+
+#ifdef CONFIG_X86_64
+ vxtime.hpet_address = hpet_tbl->addr.addrl |
+ ((long) hpet_tbl->addr.addrh << 32);
+
+ printk(KERN_INFO PREFIX "HPET id: %#x base: %#lx\n",
+ hpet_tbl->id, vxtime.hpet_address);
+#else /* X86 */
+ {
+ extern unsigned long hpet_address;
+
+ hpet_address = hpet_tbl->addr.addrl;
+ printk(KERN_INFO PREFIX "HPET id: %#x base: %#lx\n",
+ hpet_tbl->id, hpet_address);
+ }
+#endif /* X86 */
+
+ return 0;
+}
+#else
+#define acpi_parse_hpet NULL
+#endif
+
+#ifdef CONFIG_X86_PM_TIMER
+extern u32 pmtmr_ioport;
+#endif
+
+static int __init acpi_parse_fadt(unsigned long phys, unsigned long size)
+{
+ struct fadt_descriptor_rev2 *fadt = NULL;
+
+ fadt = (struct fadt_descriptor_rev2*) __acpi_map_table(phys,size);
+ if(!fadt) {
+ printk(KERN_WARNING PREFIX "Unable to map FADT\n");
+ return 0;
+ }
+
+#ifdef CONFIG_ACPI_INTERPRETER
+ /* initialize sci_int early for INT_SRC_OVR MADT parsing */
+ acpi_fadt.sci_int = fadt->sci_int;
+#endif
+
+#ifdef CONFIG_X86_PM_TIMER
+ /* detect the location of the ACPI PM Timer */
+ if (fadt->revision >= FADT2_REVISION_ID) {
+ /* FADT rev. 2 */
+ if (fadt->xpm_tmr_blk.address_space_id != ACPI_ADR_SPACE_SYSTEM_IO)
+ return 0;
+
+ pmtmr_ioport = fadt->xpm_tmr_blk.address;
+ } else {
+ /* FADT rev. 1 */
+ pmtmr_ioport = fadt->V1_pm_tmr_blk;
+ }
+ if (pmtmr_ioport)
+ printk(KERN_INFO PREFIX "PM-Timer IO Port: %#x\n", pmtmr_ioport);
+#endif
+ return 0;
+}
+
+
+unsigned long __init
+acpi_find_rsdp (void)
+{
+ unsigned long rsdp_phys = 0;
+
+ if (efi_enabled) {
+ if (efi.acpi20)
+ return __pa(efi.acpi20);
+ else if (efi.acpi)
+ return __pa(efi.acpi);
+ }
+ /*
+ * Scan memory looking for the RSDP signature. First search EBDA (low
+ * memory) paragraphs and then search upper memory (E0000-FFFFF).
+ */
+ rsdp_phys = acpi_scan_rsdp (0, 0x400);
+ if (!rsdp_phys)
+ rsdp_phys = acpi_scan_rsdp (0xE0000, 0xFFFFF);
+
+ return rsdp_phys;
+}
+
+#ifdef CONFIG_X86_LOCAL_APIC
+/*
+ * Parse LAPIC entries in MADT
+ * returns 0 on success, < 0 on error
+ */
+static int __init
+acpi_parse_madt_lapic_entries(void)
+{
+ int count;
+
+ /*
+ * Note that the LAPIC address is obtained from the MADT (32-bit value)
+ * and (optionally) overriden by a LAPIC_ADDR_OVR entry (64-bit value).
+ */
+
+ count = acpi_table_parse_madt(ACPI_MADT_LAPIC_ADDR_OVR, acpi_parse_lapic_addr_ovr, 0);
+ if (count < 0) {
+ printk(KERN_ERR PREFIX "Error parsing LAPIC address override entry\n");
+ return count;
+ }
+
+ mp_register_lapic_address(acpi_lapic_addr);
+
+ count = acpi_table_parse_madt(ACPI_MADT_LAPIC, acpi_parse_lapic,
+ MAX_APICS);
+ if (!count) {
+ printk(KERN_ERR PREFIX "No LAPIC entries present\n");
+ /* TBD: Cleanup to allow fallback to MPS */
+ return -ENODEV;
+ }
+ else if (count < 0) {
+ printk(KERN_ERR PREFIX "Error parsing LAPIC entry\n");
+ /* TBD: Cleanup to allow fallback to MPS */
+ return count;
+ }
+
+ count = acpi_table_parse_madt(ACPI_MADT_LAPIC_NMI, acpi_parse_lapic_nmi, 0);
+ if (count < 0) {
+ printk(KERN_ERR PREFIX "Error parsing LAPIC NMI entry\n");
+ /* TBD: Cleanup to allow fallback to MPS */
+ return count;
+ }
+ return 0;
+}
+#endif /* CONFIG_X86_LOCAL_APIC */
+
+#if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_ACPI_INTERPRETER)
+/*
+ * Parse IOAPIC related entries in MADT
+ * returns 0 on success, < 0 on error
+ */
+static int __init
+acpi_parse_madt_ioapic_entries(void)
+{
+ int count;
+
+ /*
+ * ACPI interpreter is required to complete interrupt setup,
+ * so if it is off, don't enumerate the io-apics with ACPI.
+ * If MPS is present, it will handle them,
+ * otherwise the system will stay in PIC mode
+ */
+ if (acpi_disabled || acpi_noirq) {
+ return -ENODEV;
+ }
+
+ /*
+ * if "noapic" boot option, don't look for IO-APICs
+ */
+ if (skip_ioapic_setup) {
+ printk(KERN_INFO PREFIX "Skipping IOAPIC probe "
+ "due to 'noapic' option.\n");
+ return -ENODEV;
+ }
+
+ count = acpi_table_parse_madt(ACPI_MADT_IOAPIC, acpi_parse_ioapic, MAX_IO_APICS);
+ if (!count) {
+ printk(KERN_ERR PREFIX "No IOAPIC entries present\n");
+ return -ENODEV;
+ }
+ else if (count < 0) {
+ printk(KERN_ERR PREFIX "Error parsing IOAPIC entry\n");
+ return count;
+ }
+
+ count = acpi_table_parse_madt(ACPI_MADT_INT_SRC_OVR, acpi_parse_int_src_ovr, NR_IRQ_VECTORS);
+ if (count < 0) {
+ printk(KERN_ERR PREFIX "Error parsing interrupt source overrides entry\n");
+ /* TBD: Cleanup to allow fallback to MPS */
+ return count;
+ }
+
+ /*
+ * If BIOS did not supply an INT_SRC_OVR for the SCI
+ * pretend we got one so we can set the SCI flags.
+ */
+ if (!acpi_sci_override_gsi)
+ acpi_sci_ioapic_setup(acpi_fadt.sci_int, 0, 0);
+
+ /* Fill in identity legacy mapings where no override */
+ mp_config_acpi_legacy_irqs();
+
+ count = acpi_table_parse_madt(ACPI_MADT_NMI_SRC, acpi_parse_nmi_src, NR_IRQ_VECTORS);
+ if (count < 0) {
+ printk(KERN_ERR PREFIX "Error parsing NMI SRC entry\n");
+ /* TBD: Cleanup to allow fallback to MPS */
+ return count;
+ }
+
+ return 0;
+}
+#else
+static inline int acpi_parse_madt_ioapic_entries(void)
+{
+ return -1;
+}
+#endif /* !(CONFIG_X86_IO_APIC && CONFIG_ACPI_INTERPRETER) */
+
+
+static void __init
+acpi_process_madt(void)
+{
+#ifdef CONFIG_X86_LOCAL_APIC
+ int count, error;
+
+ count = acpi_table_parse(ACPI_APIC, acpi_parse_madt);
+ if (count >= 1) {
+
+ /*
+ * Parse MADT LAPIC entries
+ */
+ error = acpi_parse_madt_lapic_entries();
+ if (!error) {
+ acpi_lapic = 1;
+
+ /*
+ * Parse MADT IO-APIC entries
+ */
+ error = acpi_parse_madt_ioapic_entries();
+ if (!error) {
+ acpi_irq_model = ACPI_IRQ_MODEL_IOAPIC;
+ acpi_irq_balance_set(NULL);
+ acpi_ioapic = 1;
+
+ smp_found_config = 1;
+ clustered_apic_check();
+ }
+ }
+ if (error == -EINVAL) {
+ /*
+ * Dell Precision Workstation 410, 610 come here.
+ */
+ printk(KERN_ERR PREFIX "Invalid BIOS MADT, disabling ACPI\n");
+ disable_acpi();
+ }
+ }
+#endif
+ return;
+}
+
+/*
+ * acpi_boot_table_init() and acpi_boot_init()
+ * called from setup_arch(), always.
+ * 1. checksums all tables
+ * 2. enumerates lapics
+ * 3. enumerates io-apics
+ *
+ * acpi_table_init() is separate to allow reading SRAT without
+ * other side effects.
+ *
+ * side effects of acpi_boot_init:
+ * acpi_lapic = 1 if LAPIC found
+ * acpi_ioapic = 1 if IOAPIC found
+ * if (acpi_lapic && acpi_ioapic) smp_found_config = 1;
+ * if acpi_blacklisted() acpi_disabled = 1;
+ * acpi_irq_model=...
+ * ...
+ *
+ * return value: (currently ignored)
+ * 0: success
+ * !0: failure
+ */
+
+int __init
+acpi_boot_table_init(void)
+{
+ int error;
+
+ /*
+ * If acpi_disabled, bail out
+ * One exception: acpi=ht continues far enough to enumerate LAPICs
+ */
+ if (acpi_disabled && !acpi_ht)
+ return 1;
+
+ /*
+ * Initialize the ACPI boot-time table parser.
+ */
+ error = acpi_table_init();
+ if (error) {
+ disable_acpi();
+ return error;
+ }
+
+#ifdef __i386__
+ check_acpi_pci();
+#endif
+
+ acpi_table_parse(ACPI_BOOT, acpi_parse_sbf);
+
+ /*
+ * blacklist may disable ACPI entirely
+ */
+ error = acpi_blacklisted();
+ if (error) {
+ extern int acpi_force;
+
+ if (acpi_force) {
+ printk(KERN_WARNING PREFIX "acpi=force override\n");
+ } else {
+ printk(KERN_WARNING PREFIX "Disabling ACPI support\n");
+ disable_acpi();
+ return error;
+ }
+ }
+
+ return 0;
+}
+
+
+int __init acpi_boot_init(void)
+{
+ /*
+ * If acpi_disabled, bail out
+ * One exception: acpi=ht continues far enough to enumerate LAPICs
+ */
+ if (acpi_disabled && !acpi_ht)
+ return 1;
+
+ acpi_table_parse(ACPI_BOOT, acpi_parse_sbf);
+
+ /*
+ * set sci_int and PM timer address
+ */
+ acpi_table_parse(ACPI_FADT, acpi_parse_fadt);
+
+ /*
+ * Process the Multiple APIC Description Table (MADT), if present
+ */
+ acpi_process_madt();
+
+ acpi_table_parse(ACPI_HPET, acpi_parse_hpet);
+ acpi_table_parse(ACPI_MCFG, acpi_parse_mcfg);
+
+ return 0;
+}
+