summaryrefslogtreecommitdiffstats
path: root/arch/i386/kernel/apm.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/i386/kernel/apm.c')
-rw-r--r--arch/i386/kernel/apm.c2428
1 files changed, 2428 insertions, 0 deletions
diff --git a/arch/i386/kernel/apm.c b/arch/i386/kernel/apm.c
new file mode 100644
index 00000000000..45641a87255
--- /dev/null
+++ b/arch/i386/kernel/apm.c
@@ -0,0 +1,2428 @@
+/* -*- linux-c -*-
+ * APM BIOS driver for Linux
+ * Copyright 1994-2001 Stephen Rothwell (sfr@canb.auug.org.au)
+ *
+ * Initial development of this driver was funded by NEC Australia P/L
+ * and NEC Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * October 1995, Rik Faith (faith@cs.unc.edu):
+ * Minor enhancements and updates (to the patch set) for 1.3.x
+ * Documentation
+ * January 1996, Rik Faith (faith@cs.unc.edu):
+ * Make /proc/apm easy to format (bump driver version)
+ * March 1996, Rik Faith (faith@cs.unc.edu):
+ * Prohibit APM BIOS calls unless apm_enabled.
+ * (Thanks to Ulrich Windl <Ulrich.Windl@rz.uni-regensburg.de>)
+ * April 1996, Stephen Rothwell (sfr@canb.auug.org.au)
+ * Version 1.0 and 1.1
+ * May 1996, Version 1.2
+ * Feb 1998, Version 1.3
+ * Feb 1998, Version 1.4
+ * Aug 1998, Version 1.5
+ * Sep 1998, Version 1.6
+ * Nov 1998, Version 1.7
+ * Jan 1999, Version 1.8
+ * Jan 1999, Version 1.9
+ * Oct 1999, Version 1.10
+ * Nov 1999, Version 1.11
+ * Jan 2000, Version 1.12
+ * Feb 2000, Version 1.13
+ * Nov 2000, Version 1.14
+ * Oct 2001, Version 1.15
+ * Jan 2002, Version 1.16
+ * Oct 2002, Version 1.16ac
+ *
+ * History:
+ * 0.6b: first version in official kernel, Linux 1.3.46
+ * 0.7: changed /proc/apm format, Linux 1.3.58
+ * 0.8: fixed gcc 2.7.[12] compilation problems, Linux 1.3.59
+ * 0.9: only call bios if bios is present, Linux 1.3.72
+ * 1.0: use fixed device number, consolidate /proc/apm into this file,
+ * Linux 1.3.85
+ * 1.1: support user-space standby and suspend, power off after system
+ * halted, Linux 1.3.98
+ * 1.2: When resetting RTC after resume, take care so that the time
+ * is only incorrect by 30-60mS (vs. 1S previously) (Gabor J. Toth
+ * <jtoth@princeton.edu>); improve interaction between
+ * screen-blanking and gpm (Stephen Rothwell); Linux 1.99.4
+ * 1.2a:Simple change to stop mysterious bug reports with SMP also added
+ * levels to the printk calls. APM is not defined for SMP machines.
+ * The new replacment for it is, but Linux doesn't yet support this.
+ * Alan Cox Linux 2.1.55
+ * 1.3: Set up a valid data descriptor 0x40 for buggy BIOS's
+ * 1.4: Upgraded to support APM 1.2. Integrated ThinkPad suspend patch by
+ * Dean Gaudet <dgaudet@arctic.org>.
+ * C. Scott Ananian <cananian@alumni.princeton.edu> Linux 2.1.87
+ * 1.5: Fix segment register reloading (in case of bad segments saved
+ * across BIOS call).
+ * Stephen Rothwell
+ * 1.6: Cope with complier/assembler differences.
+ * Only try to turn off the first display device.
+ * Fix OOPS at power off with no APM BIOS by Jan Echternach
+ * <echter@informatik.uni-rostock.de>
+ * Stephen Rothwell
+ * 1.7: Modify driver's cached copy of the disabled/disengaged flags
+ * to reflect current state of APM BIOS.
+ * Chris Rankin <rankinc@bellsouth.net>
+ * Reset interrupt 0 timer to 100Hz after suspend
+ * Chad Miller <cmiller@surfsouth.com>
+ * Add CONFIG_APM_IGNORE_SUSPEND_BOUNCE
+ * Richard Gooch <rgooch@atnf.csiro.au>
+ * Allow boot time disabling of APM
+ * Make boot messages far less verbose by default
+ * Make asm safer
+ * Stephen Rothwell
+ * 1.8: Add CONFIG_APM_RTC_IS_GMT
+ * Richard Gooch <rgooch@atnf.csiro.au>
+ * change APM_NOINTS to CONFIG_APM_ALLOW_INTS
+ * remove dependency on CONFIG_PROC_FS
+ * Stephen Rothwell
+ * 1.9: Fix small typo. <laslo@wodip.opole.pl>
+ * Try to cope with BIOS's that need to have all display
+ * devices blanked and not just the first one.
+ * Ross Paterson <ross@soi.city.ac.uk>
+ * Fix segment limit setting it has always been wrong as
+ * the segments needed to have byte granularity.
+ * Mark a few things __init.
+ * Add hack to allow power off of SMP systems by popular request.
+ * Use CONFIG_SMP instead of __SMP__
+ * Ignore BOUNCES for three seconds.
+ * Stephen Rothwell
+ * 1.10: Fix for Thinkpad return code.
+ * Merge 2.2 and 2.3 drivers.
+ * Remove APM dependencies in arch/i386/kernel/process.c
+ * Remove APM dependencies in drivers/char/sysrq.c
+ * Reset time across standby.
+ * Allow more inititialisation on SMP.
+ * Remove CONFIG_APM_POWER_OFF and make it boot time
+ * configurable (default on).
+ * Make debug only a boot time parameter (remove APM_DEBUG).
+ * Try to blank all devices on any error.
+ * 1.11: Remove APM dependencies in drivers/char/console.c
+ * Check nr_running to detect if we are idle (from
+ * Borislav Deianov <borislav@lix.polytechnique.fr>)
+ * Fix for bioses that don't zero the top part of the
+ * entrypoint offset (Mario Sitta <sitta@al.unipmn.it>)
+ * (reported by Panos Katsaloulis <teras@writeme.com>).
+ * Real mode power off patch (Walter Hofmann
+ * <Walter.Hofmann@physik.stud.uni-erlangen.de>).
+ * 1.12: Remove CONFIG_SMP as the compiler will optimize
+ * the code away anyway (smp_num_cpus == 1 in UP)
+ * noted by Artur Skawina <skawina@geocities.com>.
+ * Make power off under SMP work again.
+ * Fix thinko with initial engaging of BIOS.
+ * Make sure power off only happens on CPU 0
+ * (Paul "Rusty" Russell <rusty@rustcorp.com.au>).
+ * Do error notification to user mode if BIOS calls fail.
+ * Move entrypoint offset fix to ...boot/setup.S
+ * where it belongs (Cosmos <gis88564@cis.nctu.edu.tw>).
+ * Remove smp-power-off. SMP users must now specify
+ * "apm=power-off" on the kernel command line. Suggested
+ * by Jim Avera <jima@hal.com>, modified by Alan Cox
+ * <alan@lxorguk.ukuu.org.uk>.
+ * Register the /proc/apm entry even on SMP so that
+ * scripts that check for it before doing power off
+ * work (Jim Avera <jima@hal.com>).
+ * 1.13: Changes for new pm_ interfaces (Andy Henroid
+ * <andy_henroid@yahoo.com>).
+ * Modularize the code.
+ * Fix the Thinkpad (again) :-( (CONFIG_APM_IGNORE_MULTIPLE_SUSPENDS
+ * is now the way life works).
+ * Fix thinko in suspend() (wrong return).
+ * Notify drivers on critical suspend.
+ * Make kapmd absorb more idle time (Pavel Machek <pavel@suse.cz>
+ * modified by sfr).
+ * Disable interrupts while we are suspended (Andy Henroid
+ * <andy_henroid@yahoo.com> fixed by sfr).
+ * Make power off work on SMP again (Tony Hoyle
+ * <tmh@magenta-logic.com> and <zlatko@iskon.hr>) modified by sfr.
+ * Remove CONFIG_APM_SUSPEND_BOUNCE. The bounce ignore
+ * interval is now configurable.
+ * 1.14: Make connection version persist across module unload/load.
+ * Enable and engage power management earlier.
+ * Disengage power management on module unload.
+ * Changed to use the sysrq-register hack for registering the
+ * power off function called by magic sysrq based upon discussions
+ * in irc://irc.openprojects.net/#kernelnewbies
+ * (Crutcher Dunnavant <crutcher+kernel@datastacks.com>).
+ * Make CONFIG_APM_REAL_MODE_POWER_OFF run time configurable.
+ * (Arjan van de Ven <arjanv@redhat.com>) modified by sfr.
+ * Work around byte swap bug in one of the Vaio's BIOS's
+ * (Marc Boucher <marc@mbsi.ca>).
+ * Exposed the disable flag to dmi so that we can handle known
+ * broken APM (Alan Cox <alan@redhat.com>).
+ * 1.14ac: If the BIOS says "I slowed the CPU down" then don't spin
+ * calling it - instead idle. (Alan Cox <alan@redhat.com>)
+ * If an APM idle fails log it and idle sensibly
+ * 1.15: Don't queue events to clients who open the device O_WRONLY.
+ * Don't expect replies from clients who open the device O_RDONLY.
+ * (Idea from Thomas Hood)
+ * Minor waitqueue cleanups. (John Fremlin <chief@bandits.org>)
+ * 1.16: Fix idle calling. (Andreas Steinmetz <ast@domdv.de> et al.)
+ * Notify listeners of standby or suspend events before notifying
+ * drivers. Return EBUSY to ioctl() if suspend is rejected.
+ * (Russell King <rmk@arm.linux.org.uk> and Thomas Hood)
+ * Ignore first resume after we generate our own resume event
+ * after a suspend (Thomas Hood)
+ * Daemonize now gets rid of our controlling terminal (sfr).
+ * CONFIG_APM_CPU_IDLE now just affects the default value of
+ * idle_threshold (sfr).
+ * Change name of kernel apm daemon (as it no longer idles) (sfr).
+ * 1.16ac: Fix up SMP support somewhat. You can now force SMP on and we
+ * make _all_ APM calls on the CPU#0. Fix unsafe sign bug.
+ * TODO: determine if its "boot CPU" or "CPU0" we want to lock to.
+ *
+ * APM 1.1 Reference:
+ *
+ * Intel Corporation, Microsoft Corporation. Advanced Power Management
+ * (APM) BIOS Interface Specification, Revision 1.1, September 1993.
+ * Intel Order Number 241704-001. Microsoft Part Number 781-110-X01.
+ *
+ * [This document is available free from Intel by calling 800.628.8686 (fax
+ * 916.356.6100) or 800.548.4725; or via anonymous ftp from
+ * ftp://ftp.intel.com/pub/IAL/software_specs/apmv11.doc. It is also
+ * available from Microsoft by calling 206.882.8080.]
+ *
+ * APM 1.2 Reference:
+ * Intel Corporation, Microsoft Corporation. Advanced Power Management
+ * (APM) BIOS Interface Specification, Revision 1.2, February 1996.
+ *
+ * [This document is available from Microsoft at:
+ * http://www.microsoft.com/hwdev/busbios/amp_12.htm]
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+
+#include <linux/poll.h>
+#include <linux/types.h>
+#include <linux/stddef.h>
+#include <linux/timer.h>
+#include <linux/fcntl.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
+#include <linux/proc_fs.h>
+#include <linux/miscdevice.h>
+#include <linux/apm_bios.h>
+#include <linux/init.h>
+#include <linux/time.h>
+#include <linux/sched.h>
+#include <linux/pm.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/dmi.h>
+#include <linux/suspend.h>
+
+#include <asm/system.h>
+#include <asm/uaccess.h>
+#include <asm/desc.h>
+
+#include "io_ports.h"
+
+extern spinlock_t i8253_lock;
+extern unsigned long get_cmos_time(void);
+extern void machine_real_restart(unsigned char *, int);
+
+#if defined(CONFIG_APM_DISPLAY_BLANK) && defined(CONFIG_VT)
+extern int (*console_blank_hook)(int);
+#endif
+
+/*
+ * The apm_bios device is one of the misc char devices.
+ * This is its minor number.
+ */
+#define APM_MINOR_DEV 134
+
+/*
+ * See Documentation/Config.help for the configuration options.
+ *
+ * Various options can be changed at boot time as follows:
+ * (We allow underscores for compatibility with the modules code)
+ * apm=on/off enable/disable APM
+ * [no-]allow[-_]ints allow interrupts during BIOS calls
+ * [no-]broken[-_]psr BIOS has a broken GetPowerStatus call
+ * [no-]realmode[-_]power[-_]off switch to real mode before
+ * powering off
+ * [no-]debug log some debugging messages
+ * [no-]power[-_]off power off on shutdown
+ * [no-]smp Use apm even on an SMP box
+ * bounce[-_]interval=<n> number of ticks to ignore suspend
+ * bounces
+ * idle[-_]threshold=<n> System idle percentage above which to
+ * make APM BIOS idle calls. Set it to
+ * 100 to disable.
+ * idle[-_]period=<n> Period (in 1/100s of a second) over
+ * which the idle percentage is
+ * calculated.
+ */
+
+/* KNOWN PROBLEM MACHINES:
+ *
+ * U: TI 4000M TravelMate: BIOS is *NOT* APM compliant
+ * [Confirmed by TI representative]
+ * ?: ACER 486DX4/75: uses dseg 0040, in violation of APM specification
+ * [Confirmed by BIOS disassembly]
+ * [This may work now ...]
+ * P: Toshiba 1950S: battery life information only gets updated after resume
+ * P: Midwest Micro Soundbook Elite DX2/66 monochrome: screen blanking
+ * broken in BIOS [Reported by Garst R. Reese <reese@isn.net>]
+ * ?: AcerNote-950: oops on reading /proc/apm - workaround is a WIP
+ * Neale Banks <neale@lowendale.com.au> December 2000
+ *
+ * Legend: U = unusable with APM patches
+ * P = partially usable with APM patches
+ */
+
+/*
+ * Define as 1 to make the driver always call the APM BIOS busy
+ * routine even if the clock was not reported as slowed by the
+ * idle routine. Otherwise, define as 0.
+ */
+#define ALWAYS_CALL_BUSY 1
+
+/*
+ * Define to make the APM BIOS calls zero all data segment registers (so
+ * that an incorrect BIOS implementation will cause a kernel panic if it
+ * tries to write to arbitrary memory).
+ */
+#define APM_ZERO_SEGS
+
+#include "apm.h"
+
+/*
+ * Define to make all _set_limit calls use 64k limits. The APM 1.1 BIOS is
+ * supposed to provide limit information that it recognizes. Many machines
+ * do this correctly, but many others do not restrict themselves to their
+ * claimed limit. When this happens, they will cause a segmentation
+ * violation in the kernel at boot time. Most BIOS's, however, will
+ * respect a 64k limit, so we use that. If you want to be pedantic and
+ * hold your BIOS to its claims, then undefine this.
+ */
+#define APM_RELAX_SEGMENTS
+
+/*
+ * Define to re-initialize the interrupt 0 timer to 100 Hz after a suspend.
+ * This patched by Chad Miller <cmiller@surfsouth.com>, original code by
+ * David Chen <chen@ctpa04.mit.edu>
+ */
+#undef INIT_TIMER_AFTER_SUSPEND
+
+#ifdef INIT_TIMER_AFTER_SUSPEND
+#include <linux/timex.h>
+#include <asm/io.h>
+#include <linux/delay.h>
+#endif
+
+/*
+ * Need to poll the APM BIOS every second
+ */
+#define APM_CHECK_TIMEOUT (HZ)
+
+/*
+ * Ignore suspend events for this amount of time after a resume
+ */
+#define DEFAULT_BOUNCE_INTERVAL (3 * HZ)
+
+/*
+ * Maximum number of events stored
+ */
+#define APM_MAX_EVENTS 20
+
+/*
+ * The per-file APM data
+ */
+struct apm_user {
+ int magic;
+ struct apm_user * next;
+ int suser: 1;
+ int writer: 1;
+ int reader: 1;
+ int suspend_wait: 1;
+ int suspend_result;
+ int suspends_pending;
+ int standbys_pending;
+ int suspends_read;
+ int standbys_read;
+ int event_head;
+ int event_tail;
+ apm_event_t events[APM_MAX_EVENTS];
+};
+
+/*
+ * The magic number in apm_user
+ */
+#define APM_BIOS_MAGIC 0x4101
+
+/*
+ * idle percentage above which bios idle calls are done
+ */
+#ifdef CONFIG_APM_CPU_IDLE
+#define DEFAULT_IDLE_THRESHOLD 95
+#else
+#define DEFAULT_IDLE_THRESHOLD 100
+#endif
+#define DEFAULT_IDLE_PERIOD (100 / 3)
+
+/*
+ * Local variables
+ */
+static struct {
+ unsigned long offset;
+ unsigned short segment;
+} apm_bios_entry;
+static int clock_slowed;
+static int idle_threshold = DEFAULT_IDLE_THRESHOLD;
+static int idle_period = DEFAULT_IDLE_PERIOD;
+static int set_pm_idle;
+static int suspends_pending;
+static int standbys_pending;
+static int ignore_sys_suspend;
+static int ignore_normal_resume;
+static int bounce_interval = DEFAULT_BOUNCE_INTERVAL;
+
+#ifdef CONFIG_APM_RTC_IS_GMT
+# define clock_cmos_diff 0
+# define got_clock_diff 1
+#else
+static long clock_cmos_diff;
+static int got_clock_diff;
+#endif
+static int debug;
+static int smp;
+static int apm_disabled = -1;
+#ifdef CONFIG_SMP
+static int power_off;
+#else
+static int power_off = 1;
+#endif
+#ifdef CONFIG_APM_REAL_MODE_POWER_OFF
+static int realmode_power_off = 1;
+#else
+static int realmode_power_off;
+#endif
+static int exit_kapmd;
+static int kapmd_running;
+#ifdef CONFIG_APM_ALLOW_INTS
+static int allow_ints = 1;
+#else
+static int allow_ints;
+#endif
+static int broken_psr;
+
+static DECLARE_WAIT_QUEUE_HEAD(apm_waitqueue);
+static DECLARE_WAIT_QUEUE_HEAD(apm_suspend_waitqueue);
+static struct apm_user * user_list;
+static DEFINE_SPINLOCK(user_list_lock);
+static struct desc_struct bad_bios_desc = { 0, 0x00409200 };
+
+static char driver_version[] = "1.16ac"; /* no spaces */
+
+/*
+ * APM event names taken from the APM 1.2 specification. These are
+ * the message codes that the BIOS uses to tell us about events
+ */
+static char * apm_event_name[] = {
+ "system standby",
+ "system suspend",
+ "normal resume",
+ "critical resume",
+ "low battery",
+ "power status change",
+ "update time",
+ "critical suspend",
+ "user standby",
+ "user suspend",
+ "system standby resume",
+ "capabilities change"
+};
+#define NR_APM_EVENT_NAME \
+ (sizeof(apm_event_name) / sizeof(apm_event_name[0]))
+
+typedef struct lookup_t {
+ int key;
+ char * msg;
+} lookup_t;
+
+/*
+ * The BIOS returns a set of standard error codes in AX when the
+ * carry flag is set.
+ */
+
+static const lookup_t error_table[] = {
+/* N/A { APM_SUCCESS, "Operation succeeded" }, */
+ { APM_DISABLED, "Power management disabled" },
+ { APM_CONNECTED, "Real mode interface already connected" },
+ { APM_NOT_CONNECTED, "Interface not connected" },
+ { APM_16_CONNECTED, "16 bit interface already connected" },
+/* N/A { APM_16_UNSUPPORTED, "16 bit interface not supported" }, */
+ { APM_32_CONNECTED, "32 bit interface already connected" },
+ { APM_32_UNSUPPORTED, "32 bit interface not supported" },
+ { APM_BAD_DEVICE, "Unrecognized device ID" },
+ { APM_BAD_PARAM, "Parameter out of range" },
+ { APM_NOT_ENGAGED, "Interface not engaged" },
+ { APM_BAD_FUNCTION, "Function not supported" },
+ { APM_RESUME_DISABLED, "Resume timer disabled" },
+ { APM_BAD_STATE, "Unable to enter requested state" },
+/* N/A { APM_NO_EVENTS, "No events pending" }, */
+ { APM_NO_ERROR, "BIOS did not set a return code" },
+ { APM_NOT_PRESENT, "No APM present" }
+};
+#define ERROR_COUNT (sizeof(error_table)/sizeof(lookup_t))
+
+/**
+ * apm_error - display an APM error
+ * @str: information string
+ * @err: APM BIOS return code
+ *
+ * Write a meaningful log entry to the kernel log in the event of
+ * an APM error.
+ */
+
+static void apm_error(char *str, int err)
+{
+ int i;
+
+ for (i = 0; i < ERROR_COUNT; i++)
+ if (error_table[i].key == err) break;
+ if (i < ERROR_COUNT)
+ printk(KERN_NOTICE "apm: %s: %s\n", str, error_table[i].msg);
+ else
+ printk(KERN_NOTICE "apm: %s: unknown error code %#2.2x\n",
+ str, err);
+}
+
+/*
+ * Lock APM functionality to physical CPU 0
+ */
+
+#ifdef CONFIG_SMP
+
+static cpumask_t apm_save_cpus(void)
+{
+ cpumask_t x = current->cpus_allowed;
+ /* Some bioses don't like being called from CPU != 0 */
+ set_cpus_allowed(current, cpumask_of_cpu(0));
+ BUG_ON(smp_processor_id() != 0);
+ return x;
+}
+
+static inline void apm_restore_cpus(cpumask_t mask)
+{
+ set_cpus_allowed(current, mask);
+}
+
+#else
+
+/*
+ * No CPU lockdown needed on a uniprocessor
+ */
+
+#define apm_save_cpus() (current->cpus_allowed)
+#define apm_restore_cpus(x) (void)(x)
+
+#endif
+
+/*
+ * These are the actual BIOS calls. Depending on APM_ZERO_SEGS and
+ * apm_info.allow_ints, we are being really paranoid here! Not only
+ * are interrupts disabled, but all the segment registers (except SS)
+ * are saved and zeroed this means that if the BIOS tries to reference
+ * any data without explicitly loading the segment registers, the kernel
+ * will fault immediately rather than have some unforeseen circumstances
+ * for the rest of the kernel. And it will be very obvious! :-) Doing
+ * this depends on CS referring to the same physical memory as DS so that
+ * DS can be zeroed before the call. Unfortunately, we can't do anything
+ * about the stack segment/pointer. Also, we tell the compiler that
+ * everything could change.
+ *
+ * Also, we KNOW that for the non error case of apm_bios_call, there
+ * is no useful data returned in the low order 8 bits of eax.
+ */
+#define APM_DO_CLI \
+ if (apm_info.allow_ints) \
+ local_irq_enable(); \
+ else \
+ local_irq_disable();
+
+#ifdef APM_ZERO_SEGS
+# define APM_DECL_SEGS \
+ unsigned int saved_fs; unsigned int saved_gs;
+# define APM_DO_SAVE_SEGS \
+ savesegment(fs, saved_fs); savesegment(gs, saved_gs)
+# define APM_DO_RESTORE_SEGS \
+ loadsegment(fs, saved_fs); loadsegment(gs, saved_gs)
+#else
+# define APM_DECL_SEGS
+# define APM_DO_SAVE_SEGS
+# define APM_DO_RESTORE_SEGS
+#endif
+
+/**
+ * apm_bios_call - Make an APM BIOS 32bit call
+ * @func: APM function to execute
+ * @ebx_in: EBX register for call entry
+ * @ecx_in: ECX register for call entry
+ * @eax: EAX register return
+ * @ebx: EBX register return
+ * @ecx: ECX register return
+ * @edx: EDX register return
+ * @esi: ESI register return
+ *
+ * Make an APM call using the 32bit protected mode interface. The
+ * caller is responsible for knowing if APM BIOS is configured and
+ * enabled. This call can disable interrupts for a long period of
+ * time on some laptops. The return value is in AH and the carry
+ * flag is loaded into AL. If there is an error, then the error
+ * code is returned in AH (bits 8-15 of eax) and this function
+ * returns non-zero.
+ */
+
+static u8 apm_bios_call(u32 func, u32 ebx_in, u32 ecx_in,
+ u32 *eax, u32 *ebx, u32 *ecx, u32 *edx, u32 *esi)
+{
+ APM_DECL_SEGS
+ unsigned long flags;
+ cpumask_t cpus;
+ int cpu;
+ struct desc_struct save_desc_40;
+
+ cpus = apm_save_cpus();
+
+ cpu = get_cpu();
+ save_desc_40 = per_cpu(cpu_gdt_table, cpu)[0x40 / 8];
+ per_cpu(cpu_gdt_table, cpu)[0x40 / 8] = bad_bios_desc;
+
+ local_save_flags(flags);
+ APM_DO_CLI;
+ APM_DO_SAVE_SEGS;
+ apm_bios_call_asm(func, ebx_in, ecx_in, eax, ebx, ecx, edx, esi);
+ APM_DO_RESTORE_SEGS;
+ local_irq_restore(flags);
+ per_cpu(cpu_gdt_table, cpu)[0x40 / 8] = save_desc_40;
+ put_cpu();
+ apm_restore_cpus(cpus);
+
+ return *eax & 0xff;
+}
+
+/**
+ * apm_bios_call_simple - make a simple APM BIOS 32bit call
+ * @func: APM function to invoke
+ * @ebx_in: EBX register value for BIOS call
+ * @ecx_in: ECX register value for BIOS call
+ * @eax: EAX register on return from the BIOS call
+ *
+ * Make a BIOS call that does only returns one value, or just status.
+ * If there is an error, then the error code is returned in AH
+ * (bits 8-15 of eax) and this function returns non-zero. This is
+ * used for simpler BIOS operations. This call may hold interrupts
+ * off for a long time on some laptops.
+ */
+
+static u8 apm_bios_call_simple(u32 func, u32 ebx_in, u32 ecx_in, u32 *eax)
+{
+ u8 error;
+ APM_DECL_SEGS
+ unsigned long flags;
+ cpumask_t cpus;
+ int cpu;
+ struct desc_struct save_desc_40;
+
+
+ cpus = apm_save_cpus();
+
+ cpu = get_cpu();
+ save_desc_40 = per_cpu(cpu_gdt_table, cpu)[0x40 / 8];
+ per_cpu(cpu_gdt_table, cpu)[0x40 / 8] = bad_bios_desc;
+
+ local_save_flags(flags);
+ APM_DO_CLI;
+ APM_DO_SAVE_SEGS;
+ error = apm_bios_call_simple_asm(func, ebx_in, ecx_in, eax);
+ APM_DO_RESTORE_SEGS;
+ local_irq_restore(flags);
+ __get_cpu_var(cpu_gdt_table)[0x40 / 8] = save_desc_40;
+ put_cpu();
+ apm_restore_cpus(cpus);
+ return error;
+}
+
+/**
+ * apm_driver_version - APM driver version
+ * @val: loaded with the APM version on return
+ *
+ * Retrieve the APM version supported by the BIOS. This is only
+ * supported for APM 1.1 or higher. An error indicates APM 1.0 is
+ * probably present.
+ *
+ * On entry val should point to a value indicating the APM driver
+ * version with the high byte being the major and the low byte the
+ * minor number both in BCD
+ *
+ * On return it will hold the BIOS revision supported in the
+ * same format.
+ */
+
+static int apm_driver_version(u_short *val)
+{
+ u32 eax;
+
+ if (apm_bios_call_simple(APM_FUNC_VERSION, 0, *val, &eax))
+ return (eax >> 8) & 0xff;
+ *val = eax;
+ return APM_SUCCESS;
+}
+
+/**
+ * apm_get_event - get an APM event from the BIOS
+ * @event: pointer to the event
+ * @info: point to the event information
+ *
+ * The APM BIOS provides a polled information for event
+ * reporting. The BIOS expects to be polled at least every second
+ * when events are pending. When a message is found the caller should
+ * poll until no more messages are present. However, this causes
+ * problems on some laptops where a suspend event notification is
+ * not cleared until it is acknowledged.
+ *
+ * Additional information is returned in the info pointer, providing
+ * that APM 1.2 is in use. If no messges are pending the value 0x80
+ * is returned (No power management events pending).
+ */
+
+static int apm_get_event(apm_event_t *event, apm_eventinfo_t *info)
+{
+ u32 eax;
+ u32 ebx;
+ u32 ecx;
+ u32 dummy;
+
+ if (apm_bios_call(APM_FUNC_GET_EVENT, 0, 0, &eax, &ebx, &ecx,
+ &dummy, &dummy))
+ return (eax >> 8) & 0xff;
+ *event = ebx;
+ if (apm_info.connection_version < 0x0102)
+ *info = ~0; /* indicate info not valid */
+ else
+ *info = ecx;
+ return APM_SUCCESS;
+}
+
+/**
+ * set_power_state - set the power management state
+ * @what: which items to transition
+ * @state: state to transition to
+ *
+ * Request an APM change of state for one or more system devices. The
+ * processor state must be transitioned last of all. what holds the
+ * class of device in the upper byte and the device number (0xFF for
+ * all) for the object to be transitioned.
+ *
+ * The state holds the state to transition to, which may in fact
+ * be an acceptance of a BIOS requested state change.
+ */
+
+static int set_power_state(u_short what, u_short state)
+{
+ u32 eax;
+
+ if (apm_bios_call_simple(APM_FUNC_SET_STATE, what, state, &eax))
+ return (eax >> 8) & 0xff;
+ return APM_SUCCESS;
+}
+
+/**
+ * set_system_power_state - set system wide power state
+ * @state: which state to enter
+ *
+ * Transition the entire system into a new APM power state.
+ */
+
+static int set_system_power_state(u_short state)
+{
+ return set_power_state(APM_DEVICE_ALL, state);
+}
+
+/**
+ * apm_do_idle - perform power saving
+ *
+ * This function notifies the BIOS that the processor is (in the view
+ * of the OS) idle. It returns -1 in the event that the BIOS refuses
+ * to handle the idle request. On a success the function returns 1
+ * if the BIOS did clock slowing or 0 otherwise.
+ */
+
+static int apm_do_idle(void)
+{
+ u32 eax;
+
+ if (apm_bios_call_simple(APM_FUNC_IDLE, 0, 0, &eax)) {
+ static unsigned long t;
+
+ /* This always fails on some SMP boards running UP kernels.
+ * Only report the failure the first 5 times.
+ */
+ if (++t < 5)
+ {
+ printk(KERN_DEBUG "apm_do_idle failed (%d)\n",
+ (eax >> 8) & 0xff);
+ t = jiffies;
+ }
+ return -1;
+ }
+ clock_slowed = (apm_info.bios.flags & APM_IDLE_SLOWS_CLOCK) != 0;
+ return clock_slowed;
+}
+
+/**
+ * apm_do_busy - inform the BIOS the CPU is busy
+ *
+ * Request that the BIOS brings the CPU back to full performance.
+ */
+
+static void apm_do_busy(void)
+{
+ u32 dummy;
+
+ if (clock_slowed || ALWAYS_CALL_BUSY) {
+ (void) apm_bios_call_simple(APM_FUNC_BUSY, 0, 0, &dummy);
+ clock_slowed = 0;
+ }
+}
+
+/*
+ * If no process has really been interested in
+ * the CPU for some time, we want to call BIOS
+ * power management - we probably want
+ * to conserve power.
+ */
+#define IDLE_CALC_LIMIT (HZ * 100)
+#define IDLE_LEAKY_MAX 16
+
+static void (*original_pm_idle)(void);
+
+extern void default_idle(void);
+
+/**
+ * apm_cpu_idle - cpu idling for APM capable Linux
+ *
+ * This is the idling function the kernel executes when APM is available. It
+ * tries to do BIOS powermanagement based on the average system idle time.
+ * Furthermore it calls the system default idle routine.
+ */
+
+static void apm_cpu_idle(void)
+{
+ static int use_apm_idle; /* = 0 */
+ static unsigned int last_jiffies; /* = 0 */
+ static unsigned int last_stime; /* = 0 */
+
+ int apm_idle_done = 0;
+ unsigned int jiffies_since_last_check = jiffies - last_jiffies;
+ unsigned int bucket;
+
+recalc:
+ if (jiffies_since_last_check > IDLE_CALC_LIMIT) {
+ use_apm_idle = 0;
+ last_jiffies = jiffies;
+ last_stime = current->stime;
+ } else if (jiffies_since_last_check > idle_period) {
+ unsigned int idle_percentage;
+
+ idle_percentage = current->stime - last_stime;
+ idle_percentage *= 100;
+ idle_percentage /= jiffies_since_last_check;
+ use_apm_idle = (idle_percentage > idle_threshold);
+ if (apm_info.forbid_idle)
+ use_apm_idle = 0;
+ last_jiffies = jiffies;
+ last_stime = current->stime;
+ }
+
+ bucket = IDLE_LEAKY_MAX;
+
+ while (!need_resched()) {
+ if (use_apm_idle) {
+ unsigned int t;
+
+ t = jiffies;
+ switch (apm_do_idle()) {
+ case 0: apm_idle_done = 1;
+ if (t != jiffies) {
+ if (bucket) {
+ bucket = IDLE_LEAKY_MAX;
+ continue;
+ }
+ } else if (bucket) {
+ bucket--;
+ continue;
+ }
+ break;
+ case 1: apm_idle_done = 1;
+ break;
+ default: /* BIOS refused */
+ break;
+ }
+ }
+ if (original_pm_idle)
+ original_pm_idle();
+ else
+ default_idle();
+ jiffies_since_last_check = jiffies - last_jiffies;
+ if (jiffies_since_last_check > idle_period)
+ goto recalc;
+ }
+
+ if (apm_idle_done)
+ apm_do_busy();
+}
+
+/**
+ * apm_power_off - ask the BIOS to power off
+ *
+ * Handle the power off sequence. This is the one piece of code we
+ * will execute even on SMP machines. In order to deal with BIOS
+ * bugs we support real mode APM BIOS power off calls. We also make
+ * the SMP call on CPU0 as some systems will only honour this call
+ * on their first cpu.
+ */
+
+static void apm_power_off(void)
+{
+ unsigned char po_bios_call[] = {
+ 0xb8, 0x00, 0x10, /* movw $0x1000,ax */
+ 0x8e, 0xd0, /* movw ax,ss */
+ 0xbc, 0x00, 0xf0, /* movw $0xf000,sp */
+ 0xb8, 0x07, 0x53, /* movw $0x5307,ax */
+ 0xbb, 0x01, 0x00, /* movw $0x0001,bx */
+ 0xb9, 0x03, 0x00, /* movw $0x0003,cx */
+ 0xcd, 0x15 /* int $0x15 */
+ };
+
+ /*
+ * This may be called on an SMP machine.
+ */
+#ifdef CONFIG_SMP
+ /* Some bioses don't like being called from CPU != 0 */
+ set_cpus_allowed(current, cpumask_of_cpu(0));
+ BUG_ON(smp_processor_id() != 0);
+#endif
+ if (apm_info.realmode_power_off)
+ {
+ (void)apm_save_cpus();
+ machine_real_restart(po_bios_call, sizeof(po_bios_call));
+ }
+ else
+ (void) set_system_power_state(APM_STATE_OFF);
+}
+
+#ifdef CONFIG_APM_DO_ENABLE
+
+/**
+ * apm_enable_power_management - enable BIOS APM power management
+ * @enable: enable yes/no
+ *
+ * Enable or disable the APM BIOS power services.
+ */
+
+static int apm_enable_power_management(int enable)
+{
+ u32 eax;
+
+ if ((enable == 0) && (apm_info.bios.flags & APM_BIOS_DISENGAGED))
+ return APM_NOT_ENGAGED;
+ if (apm_bios_call_simple(APM_FUNC_ENABLE_PM, APM_DEVICE_BALL,
+ enable, &eax))
+ return (eax >> 8) & 0xff;
+ if (enable)
+ apm_info.bios.flags &= ~APM_BIOS_DISABLED;
+ else
+ apm_info.bios.flags |= APM_BIOS_DISABLED;
+ return APM_SUCCESS;
+}
+#endif
+
+/**
+ * apm_get_power_status - get current power state
+ * @status: returned status
+ * @bat: battery info
+ * @life: estimated life
+ *
+ * Obtain the current power status from the APM BIOS. We return a
+ * status which gives the rough battery status, and current power
+ * source. The bat value returned give an estimate as a percentage
+ * of life and a status value for the battery. The estimated life
+ * if reported is a lifetime in secodnds/minutes at current powwer
+ * consumption.
+ */
+
+static int apm_get_power_status(u_short *status, u_short *bat, u_short *life)
+{
+ u32 eax;
+ u32 ebx;
+ u32 ecx;
+ u32 edx;
+ u32 dummy;
+
+ if (apm_info.get_power_status_broken)
+ return APM_32_UNSUPPORTED;
+ if (apm_bios_call(APM_FUNC_GET_STATUS, APM_DEVICE_ALL, 0,
+ &eax, &ebx, &ecx, &edx, &dummy))
+ return (eax >> 8) & 0xff;
+ *status = ebx;
+ *bat = ecx;
+ if (apm_info.get_power_status_swabinminutes) {
+ *life = swab16((u16)edx);
+ *life |= 0x8000;
+ } else
+ *life = edx;
+ return APM_SUCCESS;
+}
+
+#if 0
+static int apm_get_battery_status(u_short which, u_short *status,
+ u_short *bat, u_short *life, u_short *nbat)
+{
+ u32 eax;
+ u32 ebx;
+ u32 ecx;
+ u32 edx;
+ u32 esi;
+
+ if (apm_info.connection_version < 0x0102) {
+ /* pretend we only have one battery. */
+ if (which != 1)
+ return APM_BAD_DEVICE;
+ *nbat = 1;
+ return apm_get_power_status(status, bat, life);
+ }
+
+ if (apm_bios_call(APM_FUNC_GET_STATUS, (0x8000 | (which)), 0, &eax,
+ &ebx, &ecx, &edx, &esi))
+ return (eax >> 8) & 0xff;
+ *status = ebx;
+ *bat = ecx;
+ *life = edx;
+ *nbat = esi;
+ return APM_SUCCESS;
+}
+#endif
+
+/**
+ * apm_engage_power_management - enable PM on a device
+ * @device: identity of device
+ * @enable: on/off
+ *
+ * Activate or deactive power management on either a specific device
+ * or the entire system (%APM_DEVICE_ALL).
+ */
+
+static int apm_engage_power_management(u_short device, int enable)
+{
+ u32 eax;
+
+ if ((enable == 0) && (device == APM_DEVICE_ALL)
+ && (apm_info.bios.flags & APM_BIOS_DISABLED))
+ return APM_DISABLED;
+ if (apm_bios_call_simple(APM_FUNC_ENGAGE_PM, device, enable, &eax))
+ return (eax >> 8) & 0xff;
+ if (device == APM_DEVICE_ALL) {
+ if (enable)
+ apm_info.bios.flags &= ~APM_BIOS_DISENGAGED;
+ else
+ apm_info.bios.flags |= APM_BIOS_DISENGAGED;
+ }
+ return APM_SUCCESS;
+}
+
+#if defined(CONFIG_APM_DISPLAY_BLANK) && defined(CONFIG_VT)
+
+/**
+ * apm_console_blank - blank the display
+ * @blank: on/off
+ *
+ * Attempt to blank the console, firstly by blanking just video device
+ * zero, and if that fails (some BIOSes don't support it) then it blanks
+ * all video devices. Typically the BIOS will do laptop backlight and
+ * monitor powerdown for us.
+ */
+
+static int apm_console_blank(int blank)
+{
+ int error;
+ u_short state;
+
+ state = blank ? APM_STATE_STANDBY : APM_STATE_READY;
+ /* Blank the first display device */
+ error = set_power_state(0x100, state);
+ if ((error != APM_SUCCESS) && (error != APM_NO_ERROR)) {
+ /* try to blank them all instead */
+ error = set_power_state(0x1ff, state);
+ if ((error != APM_SUCCESS) && (error != APM_NO_ERROR))
+ /* try to blank device one instead */
+ error = set_power_state(0x101, state);
+ }
+ if ((error == APM_SUCCESS) || (error == APM_NO_ERROR))
+ return 1;
+ if (error == APM_NOT_ENGAGED) {
+ static int tried;
+ int eng_error;
+ if (tried++ == 0) {
+ eng_error = apm_engage_power_management(APM_DEVICE_ALL, 1);
+ if (eng_error) {
+ apm_error("set display", error);
+ apm_error("engage interface", eng_error);
+ return 0;
+ } else
+ return apm_console_blank(blank);
+ }
+ }
+ apm_error("set display", error);
+ return 0;
+}
+#endif
+
+static int queue_empty(struct apm_user *as)
+{
+ return as->event_head == as->event_tail;
+}
+
+static apm_event_t get_queued_event(struct apm_user *as)
+{
+ as->event_tail = (as->event_tail + 1) % APM_MAX_EVENTS;
+ return as->events[as->event_tail];
+}
+
+static void queue_event(apm_event_t event, struct apm_user *sender)
+{
+ struct apm_user * as;
+
+ spin_lock(&user_list_lock);
+ if (user_list == NULL)
+ goto out;
+ for (as = user_list; as != NULL; as = as->next) {
+ if ((as == sender) || (!as->reader))
+ continue;
+ as->event_head = (as->event_head + 1) % APM_MAX_EVENTS;
+ if (as->event_head == as->event_tail) {
+ static int notified;
+
+ if (notified++ == 0)
+ printk(KERN_ERR "apm: an event queue overflowed\n");
+ as->event_tail = (as->event_tail + 1) % APM_MAX_EVENTS;
+ }
+ as->events[as->event_head] = event;
+ if ((!as->suser) || (!as->writer))
+ continue;
+ switch (event) {
+ case APM_SYS_SUSPEND:
+ case APM_USER_SUSPEND:
+ as->suspends_pending++;
+ suspends_pending++;
+ break;
+
+ case APM_SYS_STANDBY:
+ case APM_USER_STANDBY:
+ as->standbys_pending++;
+ standbys_pending++;
+ break;
+ }
+ }
+ wake_up_interruptible(&apm_waitqueue);
+out:
+ spin_unlock(&user_list_lock);
+}
+
+static void set_time(void)
+{
+ if (got_clock_diff) { /* Must know time zone in order to set clock */
+ xtime.tv_sec = get_cmos_time() + clock_cmos_diff;
+ xtime.tv_nsec = 0;
+ }
+}
+
+static void get_time_diff(void)
+{
+#ifndef CONFIG_APM_RTC_IS_GMT
+ /*
+ * Estimate time zone so that set_time can update the clock
+ */
+ clock_cmos_diff = -get_cmos_time();
+ clock_cmos_diff += get_seconds();
+ got_clock_diff = 1;
+#endif
+}
+
+static void reinit_timer(void)
+{
+#ifdef INIT_TIMER_AFTER_SUSPEND
+ unsigned long flags;
+ extern spinlock_t i8253_lock;
+
+ spin_lock_irqsave(&i8253_lock, flags);
+ /* set the clock to 100 Hz */
+ outb_p(0x34, PIT_MODE); /* binary, mode 2, LSB/MSB, ch 0 */
+ udelay(10);
+ outb_p(LATCH & 0xff, PIT_CH0); /* LSB */
+ udelay(10);
+ outb(LATCH >> 8, PIT_CH0); /* MSB */
+ udelay(10);
+ spin_unlock_irqrestore(&i8253_lock, flags);
+#endif
+}
+
+static int suspend(int vetoable)
+{
+ int err;
+ struct apm_user *as;
+
+ if (pm_send_all(PM_SUSPEND, (void *)3)) {
+ /* Vetoed */
+ if (vetoable) {
+ if (apm_info.connection_version > 0x100)
+ set_system_power_state(APM_STATE_REJECT);
+ err = -EBUSY;
+ ignore_sys_suspend = 0;
+ printk(KERN_WARNING "apm: suspend was vetoed.\n");
+ goto out;
+ }
+ printk(KERN_CRIT "apm: suspend was vetoed, but suspending anyway.\n");
+ }
+
+ device_suspend(PMSG_SUSPEND);
+ local_irq_disable();
+ device_power_down(PMSG_SUSPEND);
+
+ /* serialize with the timer interrupt */
+ write_seqlock(&xtime_lock);
+
+ /* protect against access to timer chip registers */
+ spin_lock(&i8253_lock);
+
+ get_time_diff();
+ /*
+ * Irq spinlock must be dropped around set_system_power_state.
+ * We'll undo any timer changes due to interrupts below.
+ */
+ spin_unlock(&i8253_lock);
+ write_sequnlock(&xtime_lock);
+ local_irq_enable();
+
+ save_processor_state();
+ err = set_system_power_state(APM_STATE_SUSPEND);
+ restore_processor_state();
+
+ local_irq_disable();
+ write_seqlock(&xtime_lock);
+ spin_lock(&i8253_lock);
+ reinit_timer();
+ set_time();
+ ignore_normal_resume = 1;
+
+ spin_unlock(&i8253_lock);
+ write_sequnlock(&xtime_lock);
+
+ if (err == APM_NO_ERROR)
+ err = APM_SUCCESS;
+ if (err != APM_SUCCESS)
+ apm_error("suspend", err);
+ err = (err == APM_SUCCESS) ? 0 : -EIO;
+ device_power_up();
+ local_irq_enable();
+ device_resume();
+ pm_send_all(PM_RESUME, (void *)0);
+ queue_event(APM_NORMAL_RESUME, NULL);
+ out:
+ spin_lock(&user_list_lock);
+ for (as = user_list; as != NULL; as = as->next) {
+ as->suspend_wait = 0;
+ as->suspend_result = err;
+ }
+ spin_unlock(&user_list_lock);
+ wake_up_interruptible(&apm_suspend_waitqueue);
+ return err;
+}
+
+static void standby(void)
+{
+ int err;
+
+ local_irq_disable();
+ device_power_down(PMSG_SUSPEND);
+ /* serialize with the timer interrupt */
+ write_seqlock(&xtime_lock);
+ /* If needed, notify drivers here */
+ get_time_diff();
+ write_sequnlock(&xtime_lock);
+ local_irq_enable();
+
+ err = set_system_power_state(APM_STATE_STANDBY);
+ if ((err != APM_SUCCESS) && (err != APM_NO_ERROR))
+ apm_error("standby", err);
+
+ local_irq_disable();
+ device_power_up();
+ local_irq_enable();
+}
+
+static apm_event_t get_event(void)
+{
+ int error;
+ apm_event_t event;
+ apm_eventinfo_t info;
+
+ static int notified;
+
+ /* we don't use the eventinfo */
+ error = apm_get_event(&event, &info);
+ if (error == APM_SUCCESS)
+ return event;
+
+ if ((error != APM_NO_EVENTS) && (notified++ == 0))
+ apm_error("get_event", error);
+
+ return 0;
+}
+
+static void check_events(void)
+{
+ apm_event_t event;
+ static unsigned long last_resume;
+ static int ignore_bounce;
+
+ while ((event = get_event()) != 0) {
+ if (debug) {
+ if (event <= NR_APM_EVENT_NAME)
+ printk(KERN_DEBUG "apm: received %s notify\n",
+ apm_event_name[event - 1]);
+ else
+ printk(KERN_DEBUG "apm: received unknown "
+ "event 0x%02x\n", event);
+ }
+ if (ignore_bounce
+ && ((jiffies - last_resume) > bounce_interval))
+ ignore_bounce = 0;
+
+ switch (event) {
+ case APM_SYS_STANDBY:
+ case APM_USER_STANDBY:
+ queue_event(event, NULL);
+ if (standbys_pending <= 0)
+ standby();
+ break;
+
+ case APM_USER_SUSPEND:
+#ifdef CONFIG_APM_IGNORE_USER_SUSPEND
+ if (apm_info.connection_version > 0x100)
+ set_system_power_state(APM_STATE_REJECT);
+ break;
+#endif
+ case APM_SYS_SUSPEND:
+ if (ignore_bounce) {
+ if (apm_info.connection_version > 0x100)
+ set_system_power_state(APM_STATE_REJECT);
+ break;
+ }
+ /*
+ * If we are already processing a SUSPEND,
+ * then further SUSPEND events from the BIOS
+ * will be ignored. We also return here to
+ * cope with the fact that the Thinkpads keep
+ * sending a SUSPEND event until something else
+ * happens!
+ */
+ if (ignore_sys_suspend)
+ return;
+ ignore_sys_suspend = 1;
+ queue_event(event, NULL);
+ if (suspends_pending <= 0)
+ (void) suspend(1);
+ break;
+
+ case APM_NORMAL_RESUME:
+ case APM_CRITICAL_RESUME:
+ case APM_STANDBY_RESUME:
+ ignore_sys_suspend = 0;
+ last_resume = jiffies;
+ ignore_bounce = 1;
+ if ((event != APM_NORMAL_RESUME)
+ || (ignore_normal_resume == 0)) {
+ write_seqlock_irq(&xtime_lock);
+ set_time();
+ write_sequnlock_irq(&xtime_lock);
+ device_resume();
+ pm_send_all(PM_RESUME, (void *)0);
+ queue_event(event, NULL);
+ }
+ ignore_normal_resume = 0;
+ break;
+
+ case APM_CAPABILITY_CHANGE:
+ case APM_LOW_BATTERY:
+ case APM_POWER_STATUS_CHANGE:
+ queue_event(event, NULL);
+ /* If needed, notify drivers here */
+ break;
+
+ case APM_UPDATE_TIME:
+ write_seqlock_irq(&xtime_lock);
+ set_time();
+ write_sequnlock_irq(&xtime_lock);
+ break;
+
+ case APM_CRITICAL_SUSPEND:
+ /*
+ * We are not allowed to reject a critical suspend.
+ */
+ (void) suspend(0);
+ break;
+ }
+ }
+}
+
+static void apm_event_handler(void)
+{
+ static int pending_count = 4;
+ int err;
+
+ if ((standbys_pending > 0) || (suspends_pending > 0)) {
+ if ((apm_info.connection_version > 0x100) &&
+ (pending_count-- <= 0)) {
+ pending_count = 4;
+ if (debug)
+ printk(KERN_DEBUG "apm: setting state busy\n");
+ err = set_system_power_state(APM_STATE_BUSY);
+ if (err)
+ apm_error("busy", err);
+ }
+ } else
+ pending_count = 4;
+ check_events();
+}
+
+/*
+ * This is the APM thread main loop.
+ */
+
+static void apm_mainloop(void)
+{
+ DECLARE_WAITQUEUE(wait, current);
+
+ add_wait_queue(&apm_waitqueue, &wait);
+ set_current_state(TASK_INTERRUPTIBLE);
+ for (;;) {
+ schedule_timeout(APM_CHECK_TIMEOUT);
+ if (exit_kapmd)
+ break;
+ /*
+ * Ok, check all events, check for idle (and mark us sleeping
+ * so as not to count towards the load average)..
+ */
+ set_current_state(TASK_INTERRUPTIBLE);
+ apm_event_handler();
+ }
+ remove_wait_queue(&apm_waitqueue, &wait);
+}
+
+static int check_apm_user(struct apm_user *as, const char *func)
+{
+ if ((as == NULL) || (as->magic != APM_BIOS_MAGIC)) {
+ printk(KERN_ERR "apm: %s passed bad filp\n", func);
+ return 1;
+ }
+ return 0;
+}
+
+static ssize_t do_read(struct file *fp, char __user *buf, size_t count, loff_t *ppos)
+{
+ struct apm_user * as;
+ int i;
+ apm_event_t event;
+
+ as = fp->private_data;
+ if (check_apm_user(as, "read"))
+ return -EIO;
+ if ((int)count < sizeof(apm_event_t))
+ return -EINVAL;
+ if ((queue_empty(as)) && (fp->f_flags & O_NONBLOCK))
+ return -EAGAIN;
+ wait_event_interruptible(apm_waitqueue, !queue_empty(as));
+ i = count;
+ while ((i >= sizeof(event)) && !queue_empty(as)) {
+ event = get_queued_event(as);
+ if (copy_to_user(buf, &event, sizeof(event))) {
+ if (i < count)
+ break;
+ return -EFAULT;
+ }
+ switch (event) {
+ case APM_SYS_SUSPEND:
+ case APM_USER_SUSPEND:
+ as->suspends_read++;
+ break;
+
+ case APM_SYS_STANDBY:
+ case APM_USER_STANDBY:
+ as->standbys_read++;
+ break;
+ }
+ buf += sizeof(event);
+ i -= sizeof(event);
+ }
+ if (i < count)
+ return count - i;
+ if (signal_pending(current))
+ return -ERESTARTSYS;
+ return 0;
+}
+
+static unsigned int do_poll(struct file *fp, poll_table * wait)
+{
+ struct apm_user * as;
+
+ as = fp->private_data;
+ if (check_apm_user(as, "poll"))
+ return 0;
+ poll_wait(fp, &apm_waitqueue, wait);
+ if (!queue_empty(as))
+ return POLLIN | POLLRDNORM;
+ return 0;
+}
+
+static int do_ioctl(struct inode * inode, struct file *filp,
+ u_int cmd, u_long arg)
+{
+ struct apm_user * as;
+
+ as = filp->private_data;
+ if (check_apm_user(as, "ioctl"))
+ return -EIO;
+ if ((!as->suser) || (!as->writer))
+ return -EPERM;
+ switch (cmd) {
+ case APM_IOC_STANDBY:
+ if (as->standbys_read > 0) {
+ as->standbys_read--;
+ as->standbys_pending--;
+ standbys_pending--;
+ } else
+ queue_event(APM_USER_STANDBY, as);
+ if (standbys_pending <= 0)
+ standby();
+ break;
+ case APM_IOC_SUSPEND:
+ if (as->suspends_read > 0) {
+ as->suspends_read--;
+ as->suspends_pending--;
+ suspends_pending--;
+ } else
+ queue_event(APM_USER_SUSPEND, as);
+ if (suspends_pending <= 0) {
+ return suspend(1);
+ } else {
+ as->suspend_wait = 1;
+ wait_event_interruptible(apm_suspend_waitqueue,
+ as->suspend_wait == 0);
+ return as->suspend_result;
+ }
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int do_release(struct inode * inode, struct file * filp)
+{
+ struct apm_user * as;
+
+ as = filp->private_data;
+ if (check_apm_user(as, "release"))
+ return 0;
+ filp->private_data = NULL;
+ if (as->standbys_pending > 0) {
+ standbys_pending -= as->standbys_pending;
+ if (standbys_pending <= 0)
+ standby();
+ }
+ if (as->suspends_pending > 0) {
+ suspends_pending -= as->suspends_pending;
+ if (suspends_pending <= 0)
+ (void) suspend(1);
+ }
+ spin_lock(&user_list_lock);
+ if (user_list == as)
+ user_list = as->next;
+ else {
+ struct apm_user * as1;
+
+ for (as1 = user_list;
+ (as1 != NULL) && (as1->next != as);
+ as1 = as1->next)
+ ;
+ if (as1 == NULL)
+ printk(KERN_ERR "apm: filp not in user list\n");
+ else
+ as1->next = as->next;
+ }
+ spin_unlock(&user_list_lock);
+ kfree(as);
+ return 0;
+}
+
+static int do_open(struct inode * inode, struct file * filp)
+{
+ struct apm_user * as;
+
+ as = (struct apm_user *)kmalloc(sizeof(*as), GFP_KERNEL);
+ if (as == NULL) {
+ printk(KERN_ERR "apm: cannot allocate struct of size %d bytes\n",
+ sizeof(*as));
+ return -ENOMEM;
+ }
+ as->magic = APM_BIOS_MAGIC;
+ as->event_tail = as->event_head = 0;
+ as->suspends_pending = as->standbys_pending = 0;
+ as->suspends_read = as->standbys_read = 0;
+ /*
+ * XXX - this is a tiny bit broken, when we consider BSD
+ * process accounting. If the device is opened by root, we
+ * instantly flag that we used superuser privs. Who knows,
+ * we might close the device immediately without doing a
+ * privileged operation -- cevans
+ */
+ as->suser = capable(CAP_SYS_ADMIN);
+ as->writer = (filp->f_mode & FMODE_WRITE) == FMODE_WRITE;
+ as->reader = (filp->f_mode & FMODE_READ) == FMODE_READ;
+ spin_lock(&user_list_lock);
+ as->next = user_list;
+ user_list = as;
+ spin_unlock(&user_list_lock);
+ filp->private_data = as;
+ return 0;
+}
+
+static int apm_get_info(char *buf, char **start, off_t fpos, int length)
+{
+ char * p;
+ unsigned short bx;
+ unsigned short cx;
+ unsigned short dx;
+ int error;
+ unsigned short ac_line_status = 0xff;
+ unsigned short battery_status = 0xff;
+ unsigned short battery_flag = 0xff;
+ int percentage = -1;
+ int time_units = -1;
+ char *units = "?";
+
+ p = buf;
+
+ if ((num_online_cpus() == 1) &&
+ !(error = apm_get_power_status(&bx, &cx, &dx))) {
+ ac_line_status = (bx >> 8) & 0xff;
+ battery_status = bx & 0xff;
+ if ((cx & 0xff) != 0xff)
+ percentage = cx & 0xff;
+
+ if (apm_info.connection_version > 0x100) {
+ battery_flag = (cx >> 8) & 0xff;
+ if (dx != 0xffff) {
+ units = (dx & 0x8000) ? "min" : "sec";
+ time_units = dx & 0x7fff;
+ }
+ }
+ }
+ /* Arguments, with symbols from linux/apm_bios.h. Information is
+ from the Get Power Status (0x0a) call unless otherwise noted.
+
+ 0) Linux driver version (this will change if format changes)
+ 1) APM BIOS Version. Usually 1.0, 1.1 or 1.2.
+ 2) APM flags from APM Installation Check (0x00):
+ bit 0: APM_16_BIT_SUPPORT
+ bit 1: APM_32_BIT_SUPPORT
+ bit 2: APM_IDLE_SLOWS_CLOCK
+ bit 3: APM_BIOS_DISABLED
+ bit 4: APM_BIOS_DISENGAGED
+ 3) AC line status
+ 0x00: Off-line
+ 0x01: On-line
+ 0x02: On backup power (BIOS >= 1.1 only)
+ 0xff: Unknown
+ 4) Battery status
+ 0x00: High
+ 0x01: Low
+ 0x02: Critical
+ 0x03: Charging
+ 0x04: Selected battery not present (BIOS >= 1.2 only)
+ 0xff: Unknown
+ 5) Battery flag
+ bit 0: High
+ bit 1: Low
+ bit 2: Critical
+ bit 3: Charging
+ bit 7: No system battery
+ 0xff: Unknown
+ 6) Remaining battery life (percentage of charge):
+ 0-100: valid
+ -1: Unknown
+ 7) Remaining battery life (time units):
+ Number of remaining minutes or seconds
+ -1: Unknown
+ 8) min = minutes; sec = seconds */
+
+ p += sprintf(p, "%s %d.%d 0x%02x 0x%02x 0x%02x 0x%02x %d%% %d %s\n",
+ driver_version,
+ (apm_info.bios.version >> 8) & 0xff,
+ apm_info.bios.version & 0xff,
+ apm_info.bios.flags,
+ ac_line_status,
+ battery_status,
+ battery_flag,
+ percentage,
+ time_units,
+ units);
+
+ return p - buf;
+}
+
+static int apm(void *unused)
+{
+ unsigned short bx;
+ unsigned short cx;
+ unsigned short dx;
+ int error;
+ char * power_stat;
+ char * bat_stat;
+
+ kapmd_running = 1;
+
+ daemonize("kapmd");
+
+ current->flags |= PF_NOFREEZE;
+
+#ifdef CONFIG_SMP
+ /* 2002/08/01 - WT
+ * This is to avoid random crashes at boot time during initialization
+ * on SMP systems in case of "apm=power-off" mode. Seen on ASUS A7M266D.
+ * Some bioses don't like being called from CPU != 0.
+ * Method suggested by Ingo Molnar.
+ */
+ set_cpus_allowed(current, cpumask_of_cpu(0));
+ BUG_ON(smp_processor_id() != 0);
+#endif
+
+ if (apm_info.connection_version == 0) {
+ apm_info.connection_version = apm_info.bios.version;
+ if (apm_info.connection_version > 0x100) {
+ /*
+ * We only support BIOSs up to version 1.2
+ */
+ if (apm_info.connection_version > 0x0102)
+ apm_info.connection_version = 0x0102;
+ error = apm_driver_version(&apm_info.connection_version);
+ if (error != APM_SUCCESS) {
+ apm_error("driver version", error);
+ /* Fall back to an APM 1.0 connection. */
+ apm_info.connection_version = 0x100;
+ }
+ }
+ }
+
+ if (debug)
+ printk(KERN_INFO "apm: Connection version %d.%d\n",
+ (apm_info.connection_version >> 8) & 0xff,
+ apm_info.connection_version & 0xff);
+
+#ifdef CONFIG_APM_DO_ENABLE
+ if (apm_info.bios.flags & APM_BIOS_DISABLED) {
+ /*
+ * This call causes my NEC UltraLite Versa 33/C to hang if it
+ * is booted with PM disabled but not in the docking station.
+ * Unfortunate ...
+ */
+ error = apm_enable_power_management(1);
+ if (error) {
+ apm_error("enable power management", error);
+ return -1;
+ }
+ }
+#endif
+
+ if ((apm_info.bios.flags & APM_BIOS_DISENGAGED)
+ && (apm_info.connection_version > 0x0100)) {
+ error = apm_engage_power_management(APM_DEVICE_ALL, 1);
+ if (error) {
+ apm_error("engage power management", error);
+ return -1;
+ }
+ }
+
+ if (debug && (num_online_cpus() == 1 || smp )) {
+ error = apm_get_power_status(&bx, &cx, &dx);
+ if (error)
+ printk(KERN_INFO "apm: power status not available\n");
+ else {
+ switch ((bx >> 8) & 0xff) {
+ case 0: power_stat = "off line"; break;
+ case 1: power_stat = "on line"; break;
+ case 2: power_stat = "on backup power"; break;
+ default: power_stat = "unknown"; break;
+ }
+ switch (bx & 0xff) {
+ case 0: bat_stat = "high"; break;
+ case 1: bat_stat = "low"; break;
+ case 2: bat_stat = "critical"; break;
+ case 3: bat_stat = "charging"; break;
+ default: bat_stat = "unknown"; break;
+ }
+ printk(KERN_INFO
+ "apm: AC %s, battery status %s, battery life ",
+ power_stat, bat_stat);
+ if ((cx & 0xff) == 0xff)
+ printk("unknown\n");
+ else
+ printk("%d%%\n", cx & 0xff);
+ if (apm_info.connection_version > 0x100) {
+ printk(KERN_INFO
+ "apm: battery flag 0x%02x, battery life ",
+ (cx >> 8) & 0xff);
+ if (dx == 0xffff)
+ printk("unknown\n");
+ else
+ printk("%d %s\n", dx & 0x7fff,
+ (dx & 0x8000) ?
+ "minutes" : "seconds");
+ }
+ }
+ }
+
+ /* Install our power off handler.. */
+ if (power_off)
+ pm_power_off = apm_power_off;
+
+ if (num_online_cpus() == 1 || smp) {
+#if defined(CONFIG_APM_DISPLAY_BLANK) && defined(CONFIG_VT)
+ console_blank_hook = apm_console_blank;
+#endif
+ apm_mainloop();
+#if defined(CONFIG_APM_DISPLAY_BLANK) && defined(CONFIG_VT)
+ console_blank_hook = NULL;
+#endif
+ }
+ kapmd_running = 0;
+
+ return 0;
+}
+
+#ifndef MODULE
+static int __init apm_setup(char *str)
+{
+ int invert;
+
+ while ((str != NULL) && (*str != '\0')) {
+ if (strncmp(str, "off", 3) == 0)
+ apm_disabled = 1;
+ if (strncmp(str, "on", 2) == 0)
+ apm_disabled = 0;
+ if ((strncmp(str, "bounce-interval=", 16) == 0) ||
+ (strncmp(str, "bounce_interval=", 16) == 0))
+ bounce_interval = simple_strtol(str + 16, NULL, 0);
+ if ((strncmp(str, "idle-threshold=", 15) == 0) ||
+ (strncmp(str, "idle_threshold=", 15) == 0))
+ idle_threshold = simple_strtol(str + 15, NULL, 0);
+ if ((strncmp(str, "idle-period=", 12) == 0) ||
+ (strncmp(str, "idle_period=", 12) == 0))
+ idle_period = simple_strtol(str + 12, NULL, 0);
+ invert = (strncmp(str, "no-", 3) == 0) ||
+ (strncmp(str, "no_", 3) == 0);
+ if (invert)
+ str += 3;
+ if (strncmp(str, "debug", 5) == 0)
+ debug = !invert;
+ if ((strncmp(str, "power-off", 9) == 0) ||
+ (strncmp(str, "power_off", 9) == 0))
+ power_off = !invert;
+ if (strncmp(str, "smp", 3) == 0)
+ {
+ smp = !invert;
+ idle_threshold = 100;
+ }
+ if ((strncmp(str, "allow-ints", 10) == 0) ||
+ (strncmp(str, "allow_ints", 10) == 0))
+ apm_info.allow_ints = !invert;
+ if ((strncmp(str, "broken-psr", 10) == 0) ||
+ (strncmp(str, "broken_psr", 10) == 0))
+ apm_info.get_power_status_broken = !invert;
+ if ((strncmp(str, "realmode-power-off", 18) == 0) ||
+ (strncmp(str, "realmode_power_off", 18) == 0))
+ apm_info.realmode_power_off = !invert;
+ str = strchr(str, ',');
+ if (str != NULL)
+ str += strspn(str, ", \t");
+ }
+ return 1;
+}
+
+__setup("apm=", apm_setup);
+#endif
+
+static struct file_operations apm_bios_fops = {
+ .owner = THIS_MODULE,
+ .read = do_read,
+ .poll = do_poll,
+ .ioctl = do_ioctl,
+ .open = do_open,
+ .release = do_release,
+};
+
+static struct miscdevice apm_device = {
+ APM_MINOR_DEV,
+ "apm_bios",
+ &apm_bios_fops
+};
+
+
+/* Simple "print if true" callback */
+static int __init print_if_true(struct dmi_system_id *d)
+{
+ printk("%s\n", d->ident);
+ return 0;
+}
+
+/*
+ * Some Bioses enable the PS/2 mouse (touchpad) at resume, even if it was
+ * disabled before the suspend. Linux used to get terribly confused by that.
+ */
+static int __init broken_ps2_resume(struct dmi_system_id *d)
+{
+ printk(KERN_INFO "%s machine detected. Mousepad Resume Bug workaround hopefully not needed.\n", d->ident);
+ return 0;
+}
+
+/* Some bioses have a broken protected mode poweroff and need to use realmode */
+static int __init set_realmode_power_off(struct dmi_system_id *d)
+{
+ if (apm_info.realmode_power_off == 0) {
+ apm_info.realmode_power_off = 1;
+ printk(KERN_INFO "%s bios detected. Using realmode poweroff only.\n", d->ident);
+ }
+ return 0;
+}
+
+/* Some laptops require interrupts to be enabled during APM calls */
+static int __init set_apm_ints(struct dmi_system_id *d)
+{
+ if (apm_info.allow_ints == 0) {
+ apm_info.allow_ints = 1;
+ printk(KERN_INFO "%s machine detected. Enabling interrupts during APM calls.\n", d->ident);
+ }
+ return 0;
+}
+
+/* Some APM bioses corrupt memory or just plain do not work */
+static int __init apm_is_horked(struct dmi_system_id *d)
+{
+ if (apm_info.disabled == 0) {
+ apm_info.disabled = 1;
+ printk(KERN_INFO "%s machine detected. Disabling APM.\n", d->ident);
+ }
+ return 0;
+}
+
+static int __init apm_is_horked_d850md(struct dmi_system_id *d)
+{
+ if (apm_info.disabled == 0) {
+ apm_info.disabled = 1;
+ printk(KERN_INFO "%s machine detected. Disabling APM.\n", d->ident);
+ printk(KERN_INFO "This bug is fixed in bios P15 which is available for \n");
+ printk(KERN_INFO "download from support.intel.com \n");
+ }
+ return 0;
+}
+
+/* Some APM bioses hang on APM idle calls */
+static int __init apm_likes_to_melt(struct dmi_system_id *d)
+{
+ if (apm_info.forbid_idle == 0) {
+ apm_info.forbid_idle = 1;
+ printk(KERN_INFO "%s machine detected. Disabling APM idle calls.\n", d->ident);
+ }
+ return 0;
+}
+
+/*
+ * Check for clue free BIOS implementations who use
+ * the following QA technique
+ *
+ * [ Write BIOS Code ]<------
+ * | ^
+ * < Does it Compile >----N--
+ * |Y ^
+ * < Does it Boot Win98 >-N--
+ * |Y
+ * [Ship It]
+ *
+ * Phoenix A04 08/24/2000 is known bad (Dell Inspiron 5000e)
+ * Phoenix A07 09/29/2000 is known good (Dell Inspiron 5000)
+ */
+static int __init broken_apm_power(struct dmi_system_id *d)
+{
+ apm_info.get_power_status_broken = 1;
+ printk(KERN_WARNING "BIOS strings suggest APM bugs, disabling power status reporting.\n");
+ return 0;
+}
+
+/*
+ * This bios swaps the APM minute reporting bytes over (Many sony laptops
+ * have this problem).
+ */
+static int __init swab_apm_power_in_minutes(struct dmi_system_id *d)
+{
+ apm_info.get_power_status_swabinminutes = 1;
+ printk(KERN_WARNING "BIOS strings suggest APM reports battery life in minutes and wrong byte order.\n");
+ return 0;
+}
+
+static struct dmi_system_id __initdata apm_dmi_table[] = {
+ {
+ print_if_true,
+ KERN_WARNING "IBM T23 - BIOS 1.03b+ and controller firmware 1.02+ may be needed for Linux APM.",
+ { DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
+ DMI_MATCH(DMI_BIOS_VERSION, "1AET38WW (1.01b)"), },
+ },
+ { /* Handle problems with APM on the C600 */
+ broken_ps2_resume, "Dell Latitude C600",
+ { DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Latitude C600"), },
+ },
+ { /* Allow interrupts during suspend on Dell Latitude laptops*/
+ set_apm_ints, "Dell Latitude",
+ { DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Latitude C510"), }
+ },
+ { /* APM crashes */
+ apm_is_horked, "Dell Inspiron 2500",
+ { DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 2500"),
+ DMI_MATCH(DMI_BIOS_VENDOR,"Phoenix Technologies LTD"),
+ DMI_MATCH(DMI_BIOS_VERSION,"A11"), },
+ },
+ { /* Allow interrupts during suspend on Dell Inspiron laptops*/
+ set_apm_ints, "Dell Inspiron", {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 4000"), },
+ },
+ { /* Handle problems with APM on Inspiron 5000e */
+ broken_apm_power, "Dell Inspiron 5000e",
+ { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
+ DMI_MATCH(DMI_BIOS_VERSION, "A04"),
+ DMI_MATCH(DMI_BIOS_DATE, "08/24/2000"), },
+ },
+ { /* Handle problems with APM on Inspiron 2500 */
+ broken_apm_power, "Dell Inspiron 2500",
+ { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
+ DMI_MATCH(DMI_BIOS_VERSION, "A12"),
+ DMI_MATCH(DMI_BIOS_DATE, "02/04/2002"), },
+ },
+ { /* APM crashes */
+ apm_is_horked, "Dell Dimension 4100",
+ { DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "XPS-Z"),
+ DMI_MATCH(DMI_BIOS_VENDOR,"Intel Corp."),
+ DMI_MATCH(DMI_BIOS_VERSION,"A11"), },
+ },
+ { /* Allow interrupts during suspend on Compaq Laptops*/
+ set_apm_ints, "Compaq 12XL125",
+ { DMI_MATCH(DMI_SYS_VENDOR, "Compaq"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Compaq PC"),
+ DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
+ DMI_MATCH(DMI_BIOS_VERSION,"4.06"), },
+ },
+ { /* Allow interrupts during APM or the clock goes slow */
+ set_apm_ints, "ASUSTeK",
+ { DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "L8400K series Notebook PC"), },
+ },
+ { /* APM blows on shutdown */
+ apm_is_horked, "ABIT KX7-333[R]",
+ { DMI_MATCH(DMI_BOARD_VENDOR, "ABIT"),
+ DMI_MATCH(DMI_BOARD_NAME, "VT8367-8233A (KX7-333[R])"), },
+ },
+ { /* APM crashes */
+ apm_is_horked, "Trigem Delhi3",
+ { DMI_MATCH(DMI_SYS_VENDOR, "TriGem Computer, Inc"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Delhi3"), },
+ },
+ { /* APM crashes */
+ apm_is_horked, "Fujitsu-Siemens",
+ { DMI_MATCH(DMI_BIOS_VENDOR, "hoenix/FUJITSU SIEMENS"),
+ DMI_MATCH(DMI_BIOS_VERSION, "Version1.01"), },
+ },
+ { /* APM crashes */
+ apm_is_horked_d850md, "Intel D850MD",
+ { DMI_MATCH(DMI_BIOS_VENDOR, "Intel Corp."),
+ DMI_MATCH(DMI_BIOS_VERSION, "MV85010A.86A.0016.P07.0201251536"), },
+ },
+ { /* APM crashes */
+ apm_is_horked, "Intel D810EMO",
+ { DMI_MATCH(DMI_BIOS_VENDOR, "Intel Corp."),
+ DMI_MATCH(DMI_BIOS_VERSION, "MO81010A.86A.0008.P04.0004170800"), },
+ },
+ { /* APM crashes */
+ apm_is_horked, "Dell XPS-Z",
+ { DMI_MATCH(DMI_BIOS_VENDOR, "Intel Corp."),
+ DMI_MATCH(DMI_BIOS_VERSION, "A11"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "XPS-Z"), },
+ },
+ { /* APM crashes */
+ apm_is_horked, "Sharp PC-PJ/AX",
+ { DMI_MATCH(DMI_SYS_VENDOR, "SHARP"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "PC-PJ/AX"),
+ DMI_MATCH(DMI_BIOS_VENDOR,"SystemSoft"),
+ DMI_MATCH(DMI_BIOS_VERSION,"Version R2.08"), },
+ },
+ { /* APM crashes */
+ apm_is_horked, "Dell Inspiron 2500",
+ { DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 2500"),
+ DMI_MATCH(DMI_BIOS_VENDOR,"Phoenix Technologies LTD"),
+ DMI_MATCH(DMI_BIOS_VERSION,"A11"), },
+ },
+ { /* APM idle hangs */
+ apm_likes_to_melt, "Jabil AMD",
+ { DMI_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."),
+ DMI_MATCH(DMI_BIOS_VERSION, "0AASNP06"), },
+ },
+ { /* APM idle hangs */
+ apm_likes_to_melt, "AMI Bios",
+ { DMI_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."),
+ DMI_MATCH(DMI_BIOS_VERSION, "0AASNP05"), },
+ },
+ { /* Handle problems with APM on Sony Vaio PCG-N505X(DE) */
+ swab_apm_power_in_minutes, "Sony VAIO",
+ { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
+ DMI_MATCH(DMI_BIOS_VERSION, "R0206H"),
+ DMI_MATCH(DMI_BIOS_DATE, "08/23/99"), },
+ },
+ { /* Handle problems with APM on Sony Vaio PCG-N505VX */
+ swab_apm_power_in_minutes, "Sony VAIO",
+ { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
+ DMI_MATCH(DMI_BIOS_VERSION, "W2K06H0"),
+ DMI_MATCH(DMI_BIOS_DATE, "02/03/00"), },
+ },
+ { /* Handle problems with APM on Sony Vaio PCG-XG29 */
+ swab_apm_power_in_minutes, "Sony VAIO",
+ { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
+ DMI_MATCH(DMI_BIOS_VERSION, "R0117A0"),
+ DMI_MATCH(DMI_BIOS_DATE, "04/25/00"), },
+ },
+ { /* Handle problems with APM on Sony Vaio PCG-Z600NE */
+ swab_apm_power_in_minutes, "Sony VAIO",
+ { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
+ DMI_MATCH(DMI_BIOS_VERSION, "R0121Z1"),
+ DMI_MATCH(DMI_BIOS_DATE, "05/11/00"), },
+ },
+ { /* Handle problems with APM on Sony Vaio PCG-Z600NE */
+ swab_apm_power_in_minutes, "Sony VAIO",
+ { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
+ DMI_MATCH(DMI_BIOS_VERSION, "WME01Z1"),
+ DMI_MATCH(DMI_BIOS_DATE, "08/11/00"), },
+ },
+ { /* Handle problems with APM on Sony Vaio PCG-Z600LEK(DE) */
+ swab_apm_power_in_minutes, "Sony VAIO",
+ { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
+ DMI_MATCH(DMI_BIOS_VERSION, "R0206Z3"),
+ DMI_MATCH(DMI_BIOS_DATE, "12/25/00"), },
+ },
+ { /* Handle problems with APM on Sony Vaio PCG-Z505LS */
+ swab_apm_power_in_minutes, "Sony VAIO",
+ { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
+ DMI_MATCH(DMI_BIOS_VERSION, "R0203D0"),
+ DMI_MATCH(DMI_BIOS_DATE, "05/12/00"), },
+ },
+ { /* Handle problems with APM on Sony Vaio PCG-Z505LS */
+ swab_apm_power_in_minutes, "Sony VAIO",
+ { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
+ DMI_MATCH(DMI_BIOS_VERSION, "R0203Z3"),
+ DMI_MATCH(DMI_BIOS_DATE, "08/25/00"), },
+ },
+ { /* Handle problems with APM on Sony Vaio PCG-Z505LS (with updated BIOS) */
+ swab_apm_power_in_minutes, "Sony VAIO",
+ { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
+ DMI_MATCH(DMI_BIOS_VERSION, "R0209Z3"),
+ DMI_MATCH(DMI_BIOS_DATE, "05/12/01"), },
+ },
+ { /* Handle problems with APM on Sony Vaio PCG-F104K */
+ swab_apm_power_in_minutes, "Sony VAIO",
+ { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
+ DMI_MATCH(DMI_BIOS_VERSION, "R0204K2"),
+ DMI_MATCH(DMI_BIOS_DATE, "08/28/00"), },
+ },
+
+ { /* Handle problems with APM on Sony Vaio PCG-C1VN/C1VE */
+ swab_apm_power_in_minutes, "Sony VAIO",
+ { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
+ DMI_MATCH(DMI_BIOS_VERSION, "R0208P1"),
+ DMI_MATCH(DMI_BIOS_DATE, "11/09/00"), },
+ },
+ { /* Handle problems with APM on Sony Vaio PCG-C1VE */
+ swab_apm_power_in_minutes, "Sony VAIO",
+ { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
+ DMI_MATCH(DMI_BIOS_VERSION, "R0204P1"),
+ DMI_MATCH(DMI_BIOS_DATE, "09/12/00"), },
+ },
+ { /* Handle problems with APM on Sony Vaio PCG-C1VE */
+ swab_apm_power_in_minutes, "Sony VAIO",
+ { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
+ DMI_MATCH(DMI_BIOS_VERSION, "WXPO1Z3"),
+ DMI_MATCH(DMI_BIOS_DATE, "10/26/01"), },
+ },
+ { /* broken PM poweroff bios */
+ set_realmode_power_off, "Award Software v4.60 PGMA",
+ { DMI_MATCH(DMI_BIOS_VENDOR, "Award Software International, Inc."),
+ DMI_MATCH(DMI_BIOS_VERSION, "4.60 PGMA"),
+ DMI_MATCH(DMI_BIOS_DATE, "134526184"), },
+ },
+
+ /* Generic per vendor APM settings */
+
+ { /* Allow interrupts during suspend on IBM laptops */
+ set_apm_ints, "IBM",
+ { DMI_MATCH(DMI_SYS_VENDOR, "IBM"), },
+ },
+
+ { }
+};
+
+/*
+ * Just start the APM thread. We do NOT want to do APM BIOS
+ * calls from anything but the APM thread, if for no other reason
+ * than the fact that we don't trust the APM BIOS. This way,
+ * most common APM BIOS problems that lead to protection errors
+ * etc will have at least some level of being contained...
+ *
+ * In short, if something bad happens, at least we have a choice
+ * of just killing the apm thread..
+ */
+static int __init apm_init(void)
+{
+ struct proc_dir_entry *apm_proc;
+ int ret;
+ int i;
+
+ dmi_check_system(apm_dmi_table);
+
+ if (apm_info.bios.version == 0) {
+ printk(KERN_INFO "apm: BIOS not found.\n");
+ return -ENODEV;
+ }
+ printk(KERN_INFO
+ "apm: BIOS version %d.%d Flags 0x%02x (Driver version %s)\n",
+ ((apm_info.bios.version >> 8) & 0xff),
+ (apm_info.bios.version & 0xff),
+ apm_info.bios.flags,
+ driver_version);
+ if ((apm_info.bios.flags & APM_32_BIT_SUPPORT) == 0) {
+ printk(KERN_INFO "apm: no 32 bit BIOS support\n");
+ return -ENODEV;
+ }
+
+ if (allow_ints)
+ apm_info.allow_ints = 1;
+ if (broken_psr)
+ apm_info.get_power_status_broken = 1;
+ if (realmode_power_off)
+ apm_info.realmode_power_off = 1;
+ /* User can override, but default is to trust DMI */
+ if (apm_disabled != -1)
+ apm_info.disabled = apm_disabled;
+
+ /*
+ * Fix for the Compaq Contura 3/25c which reports BIOS version 0.1
+ * but is reportedly a 1.0 BIOS.
+ */
+ if (apm_info.bios.version == 0x001)
+ apm_info.bios.version = 0x100;
+
+ /* BIOS < 1.2 doesn't set cseg_16_len */
+ if (apm_info.bios.version < 0x102)
+ apm_info.bios.cseg_16_len = 0; /* 64k */
+
+ if (debug) {
+ printk(KERN_INFO "apm: entry %x:%lx cseg16 %x dseg %x",
+ apm_info.bios.cseg, apm_info.bios.offset,
+ apm_info.bios.cseg_16, apm_info.bios.dseg);
+ if (apm_info.bios.version > 0x100)
+ printk(" cseg len %x, dseg len %x",
+ apm_info.bios.cseg_len,
+ apm_info.bios.dseg_len);
+ if (apm_info.bios.version > 0x101)
+ printk(" cseg16 len %x", apm_info.bios.cseg_16_len);
+ printk("\n");
+ }
+
+ if (apm_info.disabled) {
+ printk(KERN_NOTICE "apm: disabled on user request.\n");
+ return -ENODEV;
+ }
+ if ((num_online_cpus() > 1) && !power_off && !smp) {
+ printk(KERN_NOTICE "apm: disabled - APM is not SMP safe.\n");
+ apm_info.disabled = 1;
+ return -ENODEV;
+ }
+ if (PM_IS_ACTIVE()) {
+ printk(KERN_NOTICE "apm: overridden by ACPI.\n");
+ apm_info.disabled = 1;
+ return -ENODEV;
+ }
+ pm_active = 1;
+
+ /*
+ * Set up a segment that references the real mode segment 0x40
+ * that extends up to the end of page zero (that we have reserved).
+ * This is for buggy BIOS's that refer to (real mode) segment 0x40
+ * even though they are called in protected mode.
+ */
+ set_base(bad_bios_desc, __va((unsigned long)0x40 << 4));
+ _set_limit((char *)&bad_bios_desc, 4095 - (0x40 << 4));
+
+ apm_bios_entry.offset = apm_info.bios.offset;
+ apm_bios_entry.segment = APM_CS;
+
+ for (i = 0; i < NR_CPUS; i++) {
+ set_base(per_cpu(cpu_gdt_table, i)[APM_CS >> 3],
+ __va((unsigned long)apm_info.bios.cseg << 4));
+ set_base(per_cpu(cpu_gdt_table, i)[APM_CS_16 >> 3],
+ __va((unsigned long)apm_info.bios.cseg_16 << 4));
+ set_base(per_cpu(cpu_gdt_table, i)[APM_DS >> 3],
+ __va((unsigned long)apm_info.bios.dseg << 4));
+#ifndef APM_RELAX_SEGMENTS
+ if (apm_info.bios.version == 0x100) {
+#endif
+ /* For ASUS motherboard, Award BIOS rev 110 (and others?) */
+ _set_limit((char *)&per_cpu(cpu_gdt_table, i)[APM_CS >> 3], 64 * 1024 - 1);
+ /* For some unknown machine. */
+ _set_limit((char *)&per_cpu(cpu_gdt_table, i)[APM_CS_16 >> 3], 64 * 1024 - 1);
+ /* For the DEC Hinote Ultra CT475 (and others?) */
+ _set_limit((char *)&per_cpu(cpu_gdt_table, i)[APM_DS >> 3], 64 * 1024 - 1);
+#ifndef APM_RELAX_SEGMENTS
+ } else {
+ _set_limit((char *)&per_cpu(cpu_gdt_table, i)[APM_CS >> 3],
+ (apm_info.bios.cseg_len - 1) & 0xffff);
+ _set_limit((char *)&per_cpu(cpu_gdt_table, i)[APM_CS_16 >> 3],
+ (apm_info.bios.cseg_16_len - 1) & 0xffff);
+ _set_limit((char *)&per_cpu(cpu_gdt_table, i)[APM_DS >> 3],
+ (apm_info.bios.dseg_len - 1) & 0xffff);
+ /* workaround for broken BIOSes */
+ if (apm_info.bios.cseg_len <= apm_info.bios.offset)
+ _set_limit((char *)&per_cpu(cpu_gdt_table, i)[APM_CS >> 3], 64 * 1024 -1);
+ if (apm_info.bios.dseg_len <= 0x40) { /* 0x40 * 4kB == 64kB */
+ /* for the BIOS that assumes granularity = 1 */
+ per_cpu(cpu_gdt_table, i)[APM_DS >> 3].b |= 0x800000;
+ printk(KERN_NOTICE "apm: we set the granularity of dseg.\n");
+ }
+ }
+#endif
+ }
+
+ apm_proc = create_proc_info_entry("apm", 0, NULL, apm_get_info);
+ if (apm_proc)
+ apm_proc->owner = THIS_MODULE;
+
+ ret = kernel_thread(apm, NULL, CLONE_KERNEL | SIGCHLD);
+ if (ret < 0) {
+ printk(KERN_ERR "apm: disabled - Unable to start kernel thread.\n");
+ return -ENOMEM;
+ }
+
+ if (num_online_cpus() > 1 && !smp ) {
+ printk(KERN_NOTICE
+ "apm: disabled - APM is not SMP safe (power off active).\n");
+ return 0;
+ }
+
+ misc_register(&apm_device);
+
+ if (HZ != 100)
+ idle_period = (idle_period * HZ) / 100;
+ if (idle_threshold < 100) {
+ original_pm_idle = pm_idle;
+ pm_idle = apm_cpu_idle;
+ set_pm_idle = 1;
+ }
+
+ return 0;
+}
+
+static void __exit apm_exit(void)
+{
+ int error;
+
+ if (set_pm_idle) {
+ pm_idle = original_pm_idle;
+ /*
+ * We are about to unload the current idle thread pm callback
+ * (pm_idle), Wait for all processors to update cached/local
+ * copies of pm_idle before proceeding.
+ */
+ cpu_idle_wait();
+ }
+ if (((apm_info.bios.flags & APM_BIOS_DISENGAGED) == 0)
+ && (apm_info.connection_version > 0x0100)) {
+ error = apm_engage_power_management(APM_DEVICE_ALL, 0);
+ if (error)
+ apm_error("disengage power management", error);
+ }
+ misc_deregister(&apm_device);
+ remove_proc_entry("apm", NULL);
+ if (power_off)
+ pm_power_off = NULL;
+ exit_kapmd = 1;
+ while (kapmd_running)
+ schedule();
+ pm_active = 0;
+}
+
+module_init(apm_init);
+module_exit(apm_exit);
+
+MODULE_AUTHOR("Stephen Rothwell");
+MODULE_DESCRIPTION("Advanced Power Management");
+MODULE_LICENSE("GPL");
+module_param(debug, bool, 0644);
+MODULE_PARM_DESC(debug, "Enable debug mode");
+module_param(power_off, bool, 0444);
+MODULE_PARM_DESC(power_off, "Enable power off");
+module_param(bounce_interval, int, 0444);
+MODULE_PARM_DESC(bounce_interval,
+ "Set the number of ticks to ignore suspend bounces");
+module_param(allow_ints, bool, 0444);
+MODULE_PARM_DESC(allow_ints, "Allow interrupts during BIOS calls");
+module_param(broken_psr, bool, 0444);
+MODULE_PARM_DESC(broken_psr, "BIOS has a broken GetPowerStatus call");
+module_param(realmode_power_off, bool, 0444);
+MODULE_PARM_DESC(realmode_power_off,
+ "Switch to real mode before powering off");
+module_param(idle_threshold, int, 0444);
+MODULE_PARM_DESC(idle_threshold,
+ "System idle percentage above which to make APM BIOS idle calls");
+module_param(idle_period, int, 0444);
+MODULE_PARM_DESC(idle_period,
+ "Period (in sec/100) over which to caculate the idle percentage");
+module_param(smp, bool, 0444);
+MODULE_PARM_DESC(smp,
+ "Set this to enable APM use on an SMP platform. Use with caution on older systems");
+MODULE_ALIAS_MISCDEV(APM_MINOR_DEV);