summaryrefslogtreecommitdiffstats
path: root/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/i386/kernel/cpu/cpufreq/speedstep-smi.c')
-rw-r--r--arch/i386/kernel/cpu/cpufreq/speedstep-smi.c53
1 files changed, 26 insertions, 27 deletions
diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c b/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c
index 28cc5d524af..c28333d5364 100644
--- a/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c
+++ b/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c
@@ -13,8 +13,8 @@
*********************************************************************/
#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/cpufreq.h>
#include <linux/pci.h>
@@ -28,21 +28,21 @@
*
* These parameters are got from IST-SMI BIOS call.
* If user gives it, these are used.
- *
+ *
*/
-static int smi_port = 0;
-static int smi_cmd = 0;
-static unsigned int smi_sig = 0;
+static int smi_port = 0;
+static int smi_cmd = 0;
+static unsigned int smi_sig = 0;
/* info about the processor */
-static unsigned int speedstep_processor = 0;
+static unsigned int speedstep_processor = 0;
-/*
- * There are only two frequency states for each processor. Values
+/*
+ * There are only two frequency states for each processor. Values
* are in kHz for the time being.
*/
static struct cpufreq_frequency_table speedstep_freqs[] = {
- {SPEEDSTEP_HIGH, 0},
+ {SPEEDSTEP_HIGH, 0},
{SPEEDSTEP_LOW, 0},
{0, CPUFREQ_TABLE_END},
};
@@ -75,7 +75,9 @@ static int speedstep_smi_ownership (void)
__asm__ __volatile__(
"out %%al, (%%dx)\n"
: "=D" (result)
- : "a" (command), "b" (function), "c" (0), "d" (smi_port), "D" (0), "S" (magic)
+ : "a" (command), "b" (function), "c" (0), "d" (smi_port),
+ "D" (0), "S" (magic)
+ : "memory"
);
dprintk("result is %x\n", result);
@@ -123,7 +125,7 @@ static int speedstep_smi_get_freqs (unsigned int *low, unsigned int *high)
*low = low_mhz * 1000;
return result;
-}
+}
/**
* speedstep_get_state - set the SpeedStep state
@@ -204,7 +206,7 @@ static void speedstep_set_state (unsigned int state)
* speedstep_target - set a new CPUFreq policy
* @policy: new policy
* @target_freq: new freq
- * @relation:
+ * @relation:
*
* Sets a new CPUFreq policy/freq.
*/
@@ -283,7 +285,7 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy)
state = speedstep_get_state();
speed = speedstep_freqs[state].frequency;
- dprintk("currently at %s speed setting - %i MHz\n",
+ dprintk("currently at %s speed setting - %i MHz\n",
(speed == speedstep_freqs[SPEEDSTEP_LOW].frequency) ? "low" : "high",
(speed / 1000));
@@ -296,7 +298,7 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy)
if (result)
return (result);
- cpufreq_frequency_table_get_attr(speedstep_freqs, policy->cpu);
+ cpufreq_frequency_table_get_attr(speedstep_freqs, policy->cpu);
return 0;
}
@@ -332,8 +334,8 @@ static struct freq_attr* speedstep_attr[] = {
static struct cpufreq_driver speedstep_driver = {
.name = "speedstep-smi",
- .verify = speedstep_verify,
- .target = speedstep_target,
+ .verify = speedstep_verify,
+ .target = speedstep_target,
.init = speedstep_cpu_init,
.exit = speedstep_cpu_exit,
.get = speedstep_get,
@@ -370,13 +372,12 @@ static int __init speedstep_init(void)
return -ENODEV;
}
- dprintk("signature:0x%.8lx, command:0x%.8lx, event:0x%.8lx, perf_level:0x%.8lx.\n",
+ dprintk("signature:0x%.8lx, command:0x%.8lx, event:0x%.8lx, perf_level:0x%.8lx.\n",
ist_info.signature, ist_info.command, ist_info.event, ist_info.perf_level);
-
- /* Error if no IST-SMI BIOS or no PARM
+ /* Error if no IST-SMI BIOS or no PARM
sig= 'ISGE' aka 'Intel Speedstep Gate E' */
- if ((ist_info.signature != 0x47534943) && (
+ if ((ist_info.signature != 0x47534943) && (
(smi_port == 0) || (smi_cmd == 0)))
return -ENODEV;
@@ -386,17 +387,15 @@ static int __init speedstep_init(void)
smi_sig = ist_info.signature;
/* setup smi_port from MODLULE_PARM or BIOS */
- if ((smi_port > 0xff) || (smi_port < 0)) {
+ if ((smi_port > 0xff) || (smi_port < 0))
return -EINVAL;
- } else if (smi_port == 0) {
+ else if (smi_port == 0)
smi_port = ist_info.command & 0xff;
- }
- if ((smi_cmd > 0xff) || (smi_cmd < 0)) {
+ if ((smi_cmd > 0xff) || (smi_cmd < 0))
return -EINVAL;
- } else if (smi_cmd == 0) {
+ else if (smi_cmd == 0)
smi_cmd = (ist_info.command >> 16) & 0xff;
- }
return cpufreq_register_driver(&speedstep_driver);
}