diff options
Diffstat (limited to 'arch/i386/kernel/smpboot.c')
-rw-r--r-- | arch/i386/kernel/smpboot.c | 146 |
1 files changed, 65 insertions, 81 deletions
diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c index 4ff55e67557..a4b7ad283f4 100644 --- a/arch/i386/kernel/smpboot.c +++ b/arch/i386/kernel/smpboot.c @@ -53,13 +53,12 @@ #include <asm/desc.h> #include <asm/arch_hooks.h> #include <asm/nmi.h> -#include <asm/pda.h> -#include <asm/genapic.h> #include <mach_apic.h> #include <mach_wakecpu.h> #include <smpboot_hooks.h> #include <asm/vmi.h> +#include <asm/mtrr.h> /* Set if we find a B stepping CPU */ static int __devinitdata smp_b_stepping; @@ -100,6 +99,9 @@ EXPORT_SYMBOL(x86_cpu_to_apicid); u8 apicid_2_node[MAX_APICID]; +DEFINE_PER_CPU(unsigned long, this_cpu_off); +EXPORT_PER_CPU_SYMBOL(this_cpu_off); + /* * Trampoline 80x86 program as an array. */ @@ -156,7 +158,7 @@ static void __cpuinit smp_store_cpu_info(int id) *c = boot_cpu_data; if (id!=0) - identify_cpu(c); + identify_secondary_cpu(c); /* * Mask B, Pentium, but not Pentium MMX */ @@ -379,14 +381,14 @@ set_cpu_sibling_map(int cpu) static void __cpuinit start_secondary(void *unused) { /* - * Don't put *anything* before secondary_cpu_init(), SMP - * booting is too fragile that we want to limit the - * things done here to the most necessary things. + * Don't put *anything* before cpu_init(), SMP booting is too + * fragile that we want to limit the things done here to the + * most necessary things. */ #ifdef CONFIG_VMI vmi_bringup(); #endif - secondary_cpu_init(); + cpu_init(); preempt_disable(); smp_callin(); while (!cpu_isset(smp_processor_id(), smp_commenced_mask)) @@ -441,12 +443,6 @@ static void __cpuinit start_secondary(void *unused) void __devinit initialize_secondary(void) { /* - * switch to the per CPU GDT we already set up - * in do_boot_cpu() - */ - cpu_set_gdt(current_thread_info()->cpu); - - /* * We don't actually need to load the full TSS, * basically just the stack pointer and the eip. */ @@ -463,7 +459,6 @@ extern struct { void * esp; unsigned short ss; } stack_start; -extern struct i386_pda *start_pda; #ifdef CONFIG_NUMA @@ -521,12 +516,12 @@ static void unmap_cpu_to_logical_apicid(int cpu) unmap_cpu_to_node(cpu); } -#if APIC_DEBUG static inline void __inquire_remote_apic(int apicid) { int i, regs[] = { APIC_ID >> 4, APIC_LVR >> 4, APIC_SPIV >> 4 }; char *names[] = { "ID", "VERSION", "SPIV" }; - int timeout, status; + int timeout; + unsigned long status; printk("Inquiring remote APIC #%d...\n", apicid); @@ -536,7 +531,9 @@ static inline void __inquire_remote_apic(int apicid) /* * Wait for idle. */ - apic_wait_icr_idle(); + status = safe_apic_wait_icr_idle(); + if (status) + printk("a previous APIC delivery may have failed\n"); apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(apicid)); apic_write_around(APIC_ICR, APIC_DM_REMRD | regs[i]); @@ -550,14 +547,13 @@ static inline void __inquire_remote_apic(int apicid) switch (status) { case APIC_ICR_RR_VALID: status = apic_read(APIC_RRR); - printk("%08x\n", status); + printk("%lx\n", status); break; default: printk("failed\n"); } } } -#endif #ifdef WAKE_SECONDARY_VIA_NMI /* @@ -568,8 +564,8 @@ static inline void __inquire_remote_apic(int apicid) static int __devinit wakeup_secondary_cpu(int logical_apicid, unsigned long start_eip) { - unsigned long send_status = 0, accept_status = 0; - int timeout, maxlvt; + unsigned long send_status, accept_status = 0; + int maxlvt; /* Target chip */ apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(logical_apicid)); @@ -579,12 +575,7 @@ wakeup_secondary_cpu(int logical_apicid, unsigned long start_eip) apic_write_around(APIC_ICR, APIC_DM_NMI | APIC_DEST_LOGICAL); Dprintk("Waiting for send to finish...\n"); - timeout = 0; - do { - Dprintk("+"); - udelay(100); - send_status = apic_read(APIC_ICR) & APIC_ICR_BUSY; - } while (send_status && (timeout++ < 1000)); + send_status = safe_apic_wait_icr_idle(); /* * Give the other CPU some time to accept the IPI. @@ -614,8 +605,8 @@ wakeup_secondary_cpu(int logical_apicid, unsigned long start_eip) static int __devinit wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip) { - unsigned long send_status = 0, accept_status = 0; - int maxlvt, timeout, num_starts, j; + unsigned long send_status, accept_status = 0; + int maxlvt, num_starts, j; /* * Be paranoid about clearing APIC errors. @@ -640,12 +631,7 @@ wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip) | APIC_DM_INIT); Dprintk("Waiting for send to finish...\n"); - timeout = 0; - do { - Dprintk("+"); - udelay(100); - send_status = apic_read(APIC_ICR) & APIC_ICR_BUSY; - } while (send_status && (timeout++ < 1000)); + send_status = safe_apic_wait_icr_idle(); mdelay(10); @@ -658,12 +644,7 @@ wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip) apic_write_around(APIC_ICR, APIC_INT_LEVELTRIG | APIC_DM_INIT); Dprintk("Waiting for send to finish...\n"); - timeout = 0; - do { - Dprintk("+"); - udelay(100); - send_status = apic_read(APIC_ICR) & APIC_ICR_BUSY; - } while (send_status && (timeout++ < 1000)); + send_status = safe_apic_wait_icr_idle(); atomic_set(&init_deasserted, 1); @@ -719,12 +700,7 @@ wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip) Dprintk("Startup point 1.\n"); Dprintk("Waiting for send to finish...\n"); - timeout = 0; - do { - Dprintk("+"); - udelay(100); - send_status = apic_read(APIC_ICR) & APIC_ICR_BUSY; - } while (send_status && (timeout++ < 1000)); + send_status = safe_apic_wait_icr_idle(); /* * Give the other CPU some time to accept the IPI. @@ -788,6 +764,25 @@ static inline struct task_struct * alloc_idle_task(int cpu) #define alloc_idle_task(cpu) fork_idle(cpu) #endif +/* Initialize the CPU's GDT. This is either the boot CPU doing itself + (still using the master per-cpu area), or a CPU doing it for a + secondary which will soon come up. */ +static __cpuinit void init_gdt(int cpu) +{ + struct desc_struct *gdt = get_cpu_gdt_table(cpu); + + pack_descriptor((u32 *)&gdt[GDT_ENTRY_PERCPU].a, + (u32 *)&gdt[GDT_ENTRY_PERCPU].b, + __per_cpu_offset[cpu], 0xFFFFF, + 0x80 | DESCTYPE_S | 0x2, 0x8); + + per_cpu(this_cpu_off, cpu) = __per_cpu_offset[cpu]; + per_cpu(cpu_number, cpu) = cpu; +} + +/* Defined in head.S */ +extern struct Xgt_desc_struct early_gdt_descr; + static int __cpuinit do_boot_cpu(int apicid, int cpu) /* * NOTE - on most systems this is a PHYSICAL apic ID, but on multiquad @@ -802,6 +797,12 @@ static int __cpuinit do_boot_cpu(int apicid, int cpu) unsigned short nmi_high = 0, nmi_low = 0; /* + * Save current MTRR state in case it was changed since early boot + * (e.g. by the ACPI SMI) to initialize new CPUs with MTRRs in sync: + */ + mtrr_save_state(); + + /* * We can't use kernel_thread since we must avoid to * reschedule the child. */ @@ -809,13 +810,9 @@ static int __cpuinit do_boot_cpu(int apicid, int cpu) if (IS_ERR(idle)) panic("failed fork for CPU %d", cpu); - /* Pre-allocate and initialize the CPU's GDT and PDA so it - doesn't have to do any memory allocation during the - delicate CPU-bringup phase. */ - if (!init_gdt(cpu, idle)) { - printk(KERN_INFO "Couldn't allocate GDT/PDA for CPU %d\n", cpu); - return -1; /* ? */ - } + init_gdt(cpu); + per_cpu(current_task, cpu) = idle; + early_gdt_descr.address = (unsigned long)get_cpu_gdt_table(cpu); idle->thread.eip = (unsigned long) start_secondary; /* start_eip had better be page-aligned! */ @@ -941,7 +938,6 @@ static int __cpuinit __smp_prepare_cpu(int cpu) DECLARE_COMPLETION_ONSTACK(done); struct warm_boot_cpu_info info; int apicid, ret; - struct Xgt_desc_struct *cpu_gdt_descr = &per_cpu(cpu_gdt_descr, cpu); apicid = x86_cpu_to_apicid[cpu]; if (apicid == BAD_APICID) { @@ -949,18 +945,6 @@ static int __cpuinit __smp_prepare_cpu(int cpu) goto exit; } - /* - * the CPU isn't initialized at boot time, allocate gdt table here. - * cpu_init will initialize it - */ - if (!cpu_gdt_descr->address) { - cpu_gdt_descr->address = get_zeroed_page(GFP_KERNEL); - if (!cpu_gdt_descr->address) - printk(KERN_CRIT "CPU%d failed to allocate GDT\n", cpu); - ret = -ENOMEM; - goto exit; - } - info.complete = &done; info.apicid = apicid; info.cpu = cpu; @@ -1173,7 +1157,7 @@ static void __init smp_boot_cpus(unsigned int max_cpus) /* These are wrappers to interface to the new boot process. Someone who understands all this stuff should rewrite it properly. --RR 15/Jul/02 */ -void __init smp_prepare_cpus(unsigned int max_cpus) +void __init native_smp_prepare_cpus(unsigned int max_cpus) { smp_commenced_mask = cpumask_of_cpu(0); cpu_callin_map = cpumask_of_cpu(0); @@ -1181,13 +1165,18 @@ void __init smp_prepare_cpus(unsigned int max_cpus) smp_boot_cpus(max_cpus); } -void __devinit smp_prepare_boot_cpu(void) +void __init native_smp_prepare_boot_cpu(void) { - cpu_set(smp_processor_id(), cpu_online_map); - cpu_set(smp_processor_id(), cpu_callout_map); - cpu_set(smp_processor_id(), cpu_present_map); - cpu_set(smp_processor_id(), cpu_possible_map); - per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE; + unsigned int cpu = smp_processor_id(); + + init_gdt(cpu); + switch_to_new_gdt(); + + cpu_set(cpu, cpu_online_map); + cpu_set(cpu, cpu_callout_map); + cpu_set(cpu, cpu_present_map); + cpu_set(cpu, cpu_possible_map); + __get_cpu_var(cpu_state) = CPU_ONLINE; } #ifdef CONFIG_HOTPLUG_CPU @@ -1277,7 +1266,7 @@ void __cpu_die(unsigned int cpu) } #endif /* CONFIG_HOTPLUG_CPU */ -int __cpuinit __cpu_up(unsigned int cpu) +int __cpuinit native_cpu_up(unsigned int cpu) { unsigned long flags; #ifdef CONFIG_HOTPLUG_CPU @@ -1319,15 +1308,10 @@ int __cpuinit __cpu_up(unsigned int cpu) touch_nmi_watchdog(); } -#ifdef CONFIG_X86_GENERICARCH - if (num_online_cpus() > 8 && genapic == &apic_default) - panic("Default flat APIC routing can't be used with > 8 cpus\n"); -#endif - return 0; } -void __init smp_cpus_done(unsigned int max_cpus) +void __init native_smp_cpus_done(unsigned int max_cpus) { #ifdef CONFIG_X86_IO_APIC setup_ioapic_dest(); |