summaryrefslogtreecommitdiffstats
path: root/arch/i386/kernel/timers/timer_pm.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/i386/kernel/timers/timer_pm.c')
-rw-r--r--arch/i386/kernel/timers/timer_pm.c258
1 files changed, 258 insertions, 0 deletions
diff --git a/arch/i386/kernel/timers/timer_pm.c b/arch/i386/kernel/timers/timer_pm.c
new file mode 100644
index 00000000000..d77f22030fe
--- /dev/null
+++ b/arch/i386/kernel/timers/timer_pm.c
@@ -0,0 +1,258 @@
+/*
+ * (C) Dominik Brodowski <linux@brodo.de> 2003
+ *
+ * Driver to use the Power Management Timer (PMTMR) available in some
+ * southbridges as primary timing source for the Linux kernel.
+ *
+ * Based on parts of linux/drivers/acpi/hardware/hwtimer.c, timer_pit.c,
+ * timer_hpet.c, and on Arjan van de Ven's implementation for 2.4.
+ *
+ * This file is licensed under the GPL v2.
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <asm/types.h>
+#include <asm/timer.h>
+#include <asm/smp.h>
+#include <asm/io.h>
+#include <asm/arch_hooks.h>
+
+#include <linux/timex.h>
+#include "mach_timer.h"
+
+/* Number of PMTMR ticks expected during calibration run */
+#define PMTMR_TICKS_PER_SEC 3579545
+#define PMTMR_EXPECTED_RATE \
+ ((CALIBRATE_LATCH * (PMTMR_TICKS_PER_SEC >> 10)) / (CLOCK_TICK_RATE>>10))
+
+
+/* The I/O port the PMTMR resides at.
+ * The location is detected during setup_arch(),
+ * in arch/i386/acpi/boot.c */
+u32 pmtmr_ioport = 0;
+
+
+/* value of the Power timer at last timer interrupt */
+static u32 offset_tick;
+static u32 offset_delay;
+
+static unsigned long long monotonic_base;
+static seqlock_t monotonic_lock = SEQLOCK_UNLOCKED;
+
+#define ACPI_PM_MASK 0xFFFFFF /* limit it to 24 bits */
+
+/*helper function to safely read acpi pm timesource*/
+static inline u32 read_pmtmr(void)
+{
+ u32 v1=0,v2=0,v3=0;
+ /* It has been reported that because of various broken
+ * chipsets (ICH4, PIIX4 and PIIX4E) where the ACPI PM time
+ * source is not latched, so you must read it multiple
+ * times to insure a safe value is read.
+ */
+ do {
+ v1 = inl(pmtmr_ioport);
+ v2 = inl(pmtmr_ioport);
+ v3 = inl(pmtmr_ioport);
+ } while ((v1 > v2 && v1 < v3) || (v2 > v3 && v2 < v1)
+ || (v3 > v1 && v3 < v2));
+
+ /* mask the output to 24 bits */
+ return v2 & ACPI_PM_MASK;
+}
+
+
+/*
+ * Some boards have the PMTMR running way too fast. We check
+ * the PMTMR rate against PIT channel 2 to catch these cases.
+ */
+static int verify_pmtmr_rate(void)
+{
+ u32 value1, value2;
+ unsigned long count, delta;
+
+ mach_prepare_counter();
+ value1 = read_pmtmr();
+ mach_countup(&count);
+ value2 = read_pmtmr();
+ delta = (value2 - value1) & ACPI_PM_MASK;
+
+ /* Check that the PMTMR delta is within 5% of what we expect */
+ if (delta < (PMTMR_EXPECTED_RATE * 19) / 20 ||
+ delta > (PMTMR_EXPECTED_RATE * 21) / 20) {
+ printk(KERN_INFO "PM-Timer running at invalid rate: %lu%% of normal - aborting.\n", 100UL * delta / PMTMR_EXPECTED_RATE);
+ return -1;
+ }
+
+ return 0;
+}
+
+
+static int init_pmtmr(char* override)
+{
+ u32 value1, value2;
+ unsigned int i;
+
+ if (override[0] && strncmp(override,"pmtmr",5))
+ return -ENODEV;
+
+ if (!pmtmr_ioport)
+ return -ENODEV;
+
+ /* we use the TSC for delay_pmtmr, so make sure it exists */
+ if (!cpu_has_tsc)
+ return -ENODEV;
+
+ /* "verify" this timing source */
+ value1 = read_pmtmr();
+ for (i = 0; i < 10000; i++) {
+ value2 = read_pmtmr();
+ if (value2 == value1)
+ continue;
+ if (value2 > value1)
+ goto pm_good;
+ if ((value2 < value1) && ((value2) < 0xFFF))
+ goto pm_good;
+ printk(KERN_INFO "PM-Timer had inconsistent results: 0x%#x, 0x%#x - aborting.\n", value1, value2);
+ return -EINVAL;
+ }
+ printk(KERN_INFO "PM-Timer had no reasonable result: 0x%#x - aborting.\n", value1);
+ return -ENODEV;
+
+pm_good:
+ if (verify_pmtmr_rate() != 0)
+ return -ENODEV;
+
+ init_cpu_khz();
+ return 0;
+}
+
+static inline u32 cyc2us(u32 cycles)
+{
+ /* The Power Management Timer ticks at 3.579545 ticks per microsecond.
+ * 1 / PM_TIMER_FREQUENCY == 0.27936511 =~ 286/1024 [error: 0.024%]
+ *
+ * Even with HZ = 100, delta is at maximum 35796 ticks, so it can
+ * easily be multiplied with 286 (=0x11E) without having to fear
+ * u32 overflows.
+ */
+ cycles *= 286;
+ return (cycles >> 10);
+}
+
+/*
+ * this gets called during each timer interrupt
+ * - Called while holding the writer xtime_lock
+ */
+static void mark_offset_pmtmr(void)
+{
+ u32 lost, delta, last_offset;
+ static int first_run = 1;
+ last_offset = offset_tick;
+
+ write_seqlock(&monotonic_lock);
+
+ offset_tick = read_pmtmr();
+
+ /* calculate tick interval */
+ delta = (offset_tick - last_offset) & ACPI_PM_MASK;
+
+ /* convert to usecs */
+ delta = cyc2us(delta);
+
+ /* update the monotonic base value */
+ monotonic_base += delta * NSEC_PER_USEC;
+ write_sequnlock(&monotonic_lock);
+
+ /* convert to ticks */
+ delta += offset_delay;
+ lost = delta / (USEC_PER_SEC / HZ);
+ offset_delay = delta % (USEC_PER_SEC / HZ);
+
+
+ /* compensate for lost ticks */
+ if (lost >= 2)
+ jiffies_64 += lost - 1;
+
+ /* don't calculate delay for first run,
+ or if we've got less then a tick */
+ if (first_run || (lost < 1)) {
+ first_run = 0;
+ offset_delay = 0;
+ }
+}
+
+
+static unsigned long long monotonic_clock_pmtmr(void)
+{
+ u32 last_offset, this_offset;
+ unsigned long long base, ret;
+ unsigned seq;
+
+
+ /* atomically read monotonic base & last_offset */
+ do {
+ seq = read_seqbegin(&monotonic_lock);
+ last_offset = offset_tick;
+ base = monotonic_base;
+ } while (read_seqretry(&monotonic_lock, seq));
+
+ /* Read the pmtmr */
+ this_offset = read_pmtmr();
+
+ /* convert to nanoseconds */
+ ret = (this_offset - last_offset) & ACPI_PM_MASK;
+ ret = base + (cyc2us(ret) * NSEC_PER_USEC);
+ return ret;
+}
+
+static void delay_pmtmr(unsigned long loops)
+{
+ unsigned long bclock, now;
+
+ rdtscl(bclock);
+ do
+ {
+ rep_nop();
+ rdtscl(now);
+ } while ((now-bclock) < loops);
+}
+
+
+/*
+ * get the offset (in microseconds) from the last call to mark_offset()
+ * - Called holding a reader xtime_lock
+ */
+static unsigned long get_offset_pmtmr(void)
+{
+ u32 now, offset, delta = 0;
+
+ offset = offset_tick;
+ now = read_pmtmr();
+ delta = (now - offset)&ACPI_PM_MASK;
+
+ return (unsigned long) offset_delay + cyc2us(delta);
+}
+
+
+/* acpi timer_opts struct */
+static struct timer_opts timer_pmtmr = {
+ .name = "pmtmr",
+ .mark_offset = mark_offset_pmtmr,
+ .get_offset = get_offset_pmtmr,
+ .monotonic_clock = monotonic_clock_pmtmr,
+ .delay = delay_pmtmr,
+};
+
+struct init_timer_opts __initdata timer_pmtmr_init = {
+ .init = init_pmtmr,
+ .opts = &timer_pmtmr,
+};
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>");
+MODULE_DESCRIPTION("Power Management Timer (PMTMR) as primary timing source for x86");