diff options
Diffstat (limited to 'arch/i386/kernel')
47 files changed, 1647 insertions, 2333 deletions
diff --git a/arch/i386/kernel/Makefile b/arch/i386/kernel/Makefile index 96fb8a020af..5e70c2fb273 100644 --- a/arch/i386/kernel/Makefile +++ b/arch/i386/kernel/Makefile @@ -7,10 +7,9 @@ extra-y := head.o init_task.o vmlinux.lds obj-y := process.o semaphore.o signal.o entry.o traps.o irq.o \ ptrace.o time.o ioport.o ldt.o setup.o i8259.o sys_i386.o \ pci-dma.o i386_ksyms.o i387.o bootflag.o \ - quirks.o i8237.o topology.o alternative.o + quirks.o i8237.o topology.o alternative.o i8253.o tsc.o obj-y += cpu/ -obj-y += timers/ obj-y += acpi/ obj-$(CONFIG_X86_BIOS_REBOOT) += reboot.o obj-$(CONFIG_MCA) += mca.o @@ -37,6 +36,8 @@ obj-$(CONFIG_EFI) += efi.o efi_stub.o obj-$(CONFIG_DOUBLEFAULT) += doublefault.o obj-$(CONFIG_VM86) += vm86.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o +obj-$(CONFIG_HPET_TIMER) += hpet.o +obj-$(CONFIG_K8_NB) += k8.o EXTRA_AFLAGS := -traditional @@ -76,3 +77,6 @@ SYSCFLAGS_vsyscall-syms.o = -r $(obj)/vsyscall-syms.o: $(src)/vsyscall.lds \ $(obj)/vsyscall-sysenter.o $(obj)/vsyscall-note.o FORCE $(call if_changed,syscall) + +k8-y += ../../x86_64/kernel/k8.o + diff --git a/arch/i386/kernel/alternative.c b/arch/i386/kernel/alternative.c index 5cbd6f99fb2..50eb0e03777 100644 --- a/arch/i386/kernel/alternative.c +++ b/arch/i386/kernel/alternative.c @@ -4,27 +4,41 @@ #include <asm/alternative.h> #include <asm/sections.h> -#define DEBUG 0 -#if DEBUG -# define DPRINTK(fmt, args...) printk(fmt, args) -#else -# define DPRINTK(fmt, args...) -#endif +static int no_replacement = 0; +static int smp_alt_once = 0; +static int debug_alternative = 0; + +static int __init noreplacement_setup(char *s) +{ + no_replacement = 1; + return 1; +} +static int __init bootonly(char *str) +{ + smp_alt_once = 1; + return 1; +} +static int __init debug_alt(char *str) +{ + debug_alternative = 1; + return 1; +} +__setup("noreplacement", noreplacement_setup); +__setup("smp-alt-boot", bootonly); +__setup("debug-alternative", debug_alt); + +#define DPRINTK(fmt, args...) if (debug_alternative) \ + printk(KERN_DEBUG fmt, args) + +#ifdef GENERIC_NOP1 /* Use inline assembly to define this because the nops are defined as inline assembly strings in the include files and we cannot get them easily into strings. */ asm("\t.data\nintelnops: " GENERIC_NOP1 GENERIC_NOP2 GENERIC_NOP3 GENERIC_NOP4 GENERIC_NOP5 GENERIC_NOP6 GENERIC_NOP7 GENERIC_NOP8); -asm("\t.data\nk8nops: " - K8_NOP1 K8_NOP2 K8_NOP3 K8_NOP4 K8_NOP5 K8_NOP6 - K8_NOP7 K8_NOP8); -asm("\t.data\nk7nops: " - K7_NOP1 K7_NOP2 K7_NOP3 K7_NOP4 K7_NOP5 K7_NOP6 - K7_NOP7 K7_NOP8); - -extern unsigned char intelnops[], k8nops[], k7nops[]; +extern unsigned char intelnops[]; static unsigned char *intel_nops[ASM_NOP_MAX+1] = { NULL, intelnops, @@ -36,6 +50,13 @@ static unsigned char *intel_nops[ASM_NOP_MAX+1] = { intelnops + 1 + 2 + 3 + 4 + 5 + 6, intelnops + 1 + 2 + 3 + 4 + 5 + 6 + 7, }; +#endif + +#ifdef K8_NOP1 +asm("\t.data\nk8nops: " + K8_NOP1 K8_NOP2 K8_NOP3 K8_NOP4 K8_NOP5 K8_NOP6 + K8_NOP7 K8_NOP8); +extern unsigned char k8nops[]; static unsigned char *k8_nops[ASM_NOP_MAX+1] = { NULL, k8nops, @@ -47,6 +68,13 @@ static unsigned char *k8_nops[ASM_NOP_MAX+1] = { k8nops + 1 + 2 + 3 + 4 + 5 + 6, k8nops + 1 + 2 + 3 + 4 + 5 + 6 + 7, }; +#endif + +#ifdef K7_NOP1 +asm("\t.data\nk7nops: " + K7_NOP1 K7_NOP2 K7_NOP3 K7_NOP4 K7_NOP5 K7_NOP6 + K7_NOP7 K7_NOP8); +extern unsigned char k7nops[]; static unsigned char *k7_nops[ASM_NOP_MAX+1] = { NULL, k7nops, @@ -58,6 +86,18 @@ static unsigned char *k7_nops[ASM_NOP_MAX+1] = { k7nops + 1 + 2 + 3 + 4 + 5 + 6, k7nops + 1 + 2 + 3 + 4 + 5 + 6 + 7, }; +#endif + +#ifdef CONFIG_X86_64 + +extern char __vsyscall_0; +static inline unsigned char** find_nop_table(void) +{ + return k8_nops; +} + +#else /* CONFIG_X86_64 */ + static struct nop { int cpuid; unsigned char **noptable; @@ -67,14 +107,6 @@ static struct nop { { -1, NULL } }; - -extern struct alt_instr __alt_instructions[], __alt_instructions_end[]; -extern struct alt_instr __smp_alt_instructions[], __smp_alt_instructions_end[]; -extern u8 *__smp_locks[], *__smp_locks_end[]; - -extern u8 __smp_alt_begin[], __smp_alt_end[]; - - static unsigned char** find_nop_table(void) { unsigned char **noptable = intel_nops; @@ -89,6 +121,14 @@ static unsigned char** find_nop_table(void) return noptable; } +#endif /* CONFIG_X86_64 */ + +extern struct alt_instr __alt_instructions[], __alt_instructions_end[]; +extern struct alt_instr __smp_alt_instructions[], __smp_alt_instructions_end[]; +extern u8 *__smp_locks[], *__smp_locks_end[]; + +extern u8 __smp_alt_begin[], __smp_alt_end[]; + /* Replace instructions with better alternatives for this CPU type. This runs before SMP is initialized to avoid SMP problems with self modifying code. This implies that assymetric systems where @@ -99,6 +139,7 @@ void apply_alternatives(struct alt_instr *start, struct alt_instr *end) { unsigned char **noptable = find_nop_table(); struct alt_instr *a; + u8 *instr; int diff, i, k; DPRINTK("%s: alt table %p -> %p\n", __FUNCTION__, start, end); @@ -106,7 +147,16 @@ void apply_alternatives(struct alt_instr *start, struct alt_instr *end) BUG_ON(a->replacementlen > a->instrlen); if (!boot_cpu_has(a->cpuid)) continue; - memcpy(a->instr, a->replacement, a->replacementlen); + instr = a->instr; +#ifdef CONFIG_X86_64 + /* vsyscall code is not mapped yet. resolve it manually. */ + if (instr >= (u8 *)VSYSCALL_START && instr < (u8*)VSYSCALL_END) { + instr = __va(instr - (u8*)VSYSCALL_START + (u8*)__pa_symbol(&__vsyscall_0)); + DPRINTK("%s: vsyscall fixup: %p => %p\n", + __FUNCTION__, a->instr, instr); + } +#endif + memcpy(instr, a->replacement, a->replacementlen); diff = a->instrlen - a->replacementlen; /* Pad the rest with nops */ for (i = a->replacementlen; diff > 0; diff -= k, i += k) { @@ -186,14 +236,6 @@ struct smp_alt_module { static LIST_HEAD(smp_alt_modules); static DEFINE_SPINLOCK(smp_alt); -static int smp_alt_once = 0; -static int __init bootonly(char *str) -{ - smp_alt_once = 1; - return 1; -} -__setup("smp-alt-boot", bootonly); - void alternatives_smp_module_add(struct module *mod, char *name, void *locks, void *locks_end, void *text, void *text_end) @@ -201,6 +243,9 @@ void alternatives_smp_module_add(struct module *mod, char *name, struct smp_alt_module *smp; unsigned long flags; + if (no_replacement) + return; + if (smp_alt_once) { if (boot_cpu_has(X86_FEATURE_UP)) alternatives_smp_unlock(locks, locks_end, @@ -235,7 +280,7 @@ void alternatives_smp_module_del(struct module *mod) struct smp_alt_module *item; unsigned long flags; - if (smp_alt_once) + if (no_replacement || smp_alt_once) return; spin_lock_irqsave(&smp_alt, flags); @@ -256,7 +301,7 @@ void alternatives_smp_switch(int smp) struct smp_alt_module *mod; unsigned long flags; - if (smp_alt_once) + if (no_replacement || smp_alt_once) return; BUG_ON(!smp && (num_online_cpus() > 1)); @@ -285,6 +330,13 @@ void alternatives_smp_switch(int smp) void __init alternative_instructions(void) { + if (no_replacement) { + printk(KERN_INFO "(SMP-)alternatives turned off\n"); + free_init_pages("SMP alternatives", + (unsigned long)__smp_alt_begin, + (unsigned long)__smp_alt_end); + return; + } apply_alternatives(__alt_instructions, __alt_instructions_end); /* switch to patch-once-at-boottime-only mode and free the diff --git a/arch/i386/kernel/apic.c b/arch/i386/kernel/apic.c index 5ab59c12335..7ce09492fc0 100644 --- a/arch/i386/kernel/apic.c +++ b/arch/i386/kernel/apic.c @@ -36,6 +36,7 @@ #include <asm/arch_hooks.h> #include <asm/hpet.h> #include <asm/i8253.h> +#include <asm/nmi.h> #include <mach_apic.h> #include <mach_apicdef.h> @@ -156,7 +157,7 @@ void clear_local_APIC(void) maxlvt = get_maxlvt(); /* - * Masking an LVT entry on a P6 can trigger a local APIC error + * Masking an LVT entry can trigger a local APIC error * if the vector is zero. Mask LVTERR first to prevent this. */ if (maxlvt >= 3) { @@ -1117,7 +1118,18 @@ void disable_APIC_timer(void) unsigned long v; v = apic_read(APIC_LVTT); - apic_write_around(APIC_LVTT, v | APIC_LVT_MASKED); + /* + * When an illegal vector value (0-15) is written to an LVT + * entry and delivery mode is Fixed, the APIC may signal an + * illegal vector error, with out regard to whether the mask + * bit is set or whether an interrupt is actually seen on input. + * + * Boot sequence might call this function when the LVTT has + * '0' vector value. So make sure vector field is set to + * valid value. + */ + v |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR); + apic_write_around(APIC_LVTT, v); } } diff --git a/arch/i386/kernel/apm.c b/arch/i386/kernel/apm.c index 9e819eb6822..7c5729d1fd0 100644 --- a/arch/i386/kernel/apm.c +++ b/arch/i386/kernel/apm.c @@ -764,9 +764,9 @@ static int apm_do_idle(void) int idled = 0; int polling; - polling = test_thread_flag(TIF_POLLING_NRFLAG); + polling = !!(current_thread_info()->status & TS_POLLING); if (polling) { - clear_thread_flag(TIF_POLLING_NRFLAG); + current_thread_info()->status &= ~TS_POLLING; smp_mb__after_clear_bit(); } if (!need_resched()) { @@ -774,7 +774,7 @@ static int apm_do_idle(void) ret = apm_bios_call_simple(APM_FUNC_IDLE, 0, 0, &eax); } if (polling) - set_thread_flag(TIF_POLLING_NRFLAG); + current_thread_info()->status |= TS_POLLING; if (!idled) return 0; diff --git a/arch/i386/kernel/asm-offsets.c b/arch/i386/kernel/asm-offsets.c index 36d66e2077d..c80271f8f08 100644 --- a/arch/i386/kernel/asm-offsets.c +++ b/arch/i386/kernel/asm-offsets.c @@ -4,6 +4,7 @@ * to extract and format the required data. */ +#include <linux/crypto.h> #include <linux/sched.h> #include <linux/signal.h> #include <linux/personality.h> @@ -13,6 +14,7 @@ #include <asm/fixmap.h> #include <asm/processor.h> #include <asm/thread_info.h> +#include <asm/elf.h> #define DEFINE(sym, val) \ asm volatile("\n->" #sym " %0 " #val : : "i" (val)) @@ -53,6 +55,7 @@ void foo(void) OFFSET(TI_preempt_count, thread_info, preempt_count); OFFSET(TI_addr_limit, thread_info, addr_limit); OFFSET(TI_restart_block, thread_info, restart_block); + OFFSET(TI_sysenter_return, thread_info, sysenter_return); BLANK(); OFFSET(EXEC_DOMAIN_handler, exec_domain, handler); @@ -68,5 +71,7 @@ void foo(void) sizeof(struct tss_struct)); DEFINE(PAGE_SIZE_asm, PAGE_SIZE); - DEFINE(VSYSCALL_BASE, __fix_to_virt(FIX_VSYSCALL)); + DEFINE(VDSO_PRELINK, VDSO_PRELINK); + + OFFSET(crypto_tfm_ctx_offset, crypto_tfm, __crt_ctx); } diff --git a/arch/i386/kernel/cpu/amd.c b/arch/i386/kernel/cpu/amd.c index 786d1a57048..e6a2d6b80cd 100644 --- a/arch/i386/kernel/cpu/amd.c +++ b/arch/i386/kernel/cpu/amd.c @@ -224,22 +224,26 @@ static void __init init_amd(struct cpuinfo_x86 *c) #ifdef CONFIG_X86_HT /* - * On a AMD dual core setup the lower bits of the APIC id - * distingush the cores. Assumes number of cores is a power - * of two. + * On a AMD multi core setup the lower bits of the APIC id + * distingush the cores. */ if (c->x86_max_cores > 1) { int cpu = smp_processor_id(); - unsigned bits = 0; - while ((1 << bits) < c->x86_max_cores) - bits++; - cpu_core_id[cpu] = phys_proc_id[cpu] & ((1<<bits)-1); - phys_proc_id[cpu] >>= bits; + unsigned bits = (cpuid_ecx(0x80000008) >> 12) & 0xf; + + if (bits == 0) { + while ((1 << bits) < c->x86_max_cores) + bits++; + } + c->cpu_core_id = c->phys_proc_id & ((1<<bits)-1); + c->phys_proc_id >>= bits; printk(KERN_INFO "CPU %d(%d) -> Core %d\n", - cpu, c->x86_max_cores, cpu_core_id[cpu]); + cpu, c->x86_max_cores, c->cpu_core_id); } #endif + if (cpuid_eax(0x80000000) >= 0x80000006) + num_cache_leaves = 3; } static unsigned int amd_size_cache(struct cpuinfo_x86 * c, unsigned int size) diff --git a/arch/i386/kernel/cpu/common.c b/arch/i386/kernel/cpu/common.c index 44f2c5f2dda..70c87de582c 100644 --- a/arch/i386/kernel/cpu/common.c +++ b/arch/i386/kernel/cpu/common.c @@ -294,7 +294,7 @@ void __cpuinit generic_identify(struct cpuinfo_x86 * c) if (c->x86 >= 0x6) c->x86_model += ((tfms >> 16) & 0xF) << 4; c->x86_mask = tfms & 15; -#ifdef CONFIG_SMP +#ifdef CONFIG_X86_HT c->apicid = phys_pkg_id((ebx >> 24) & 0xFF, 0); #else c->apicid = (ebx >> 24) & 0xFF; @@ -319,7 +319,7 @@ void __cpuinit generic_identify(struct cpuinfo_x86 * c) early_intel_workaround(c); #ifdef CONFIG_X86_HT - phys_proc_id[smp_processor_id()] = (cpuid_ebx(1) >> 24) & 0xff; + c->phys_proc_id = (cpuid_ebx(1) >> 24) & 0xff; #endif } @@ -477,11 +477,9 @@ void __cpuinit detect_ht(struct cpuinfo_x86 *c) { u32 eax, ebx, ecx, edx; int index_msb, core_bits; - int cpu = smp_processor_id(); cpuid(1, &eax, &ebx, &ecx, &edx); - if (!cpu_has(c, X86_FEATURE_HT) || cpu_has(c, X86_FEATURE_CMP_LEGACY)) return; @@ -492,16 +490,17 @@ void __cpuinit detect_ht(struct cpuinfo_x86 *c) } else if (smp_num_siblings > 1 ) { if (smp_num_siblings > NR_CPUS) { - printk(KERN_WARNING "CPU: Unsupported number of the siblings %d", smp_num_siblings); + printk(KERN_WARNING "CPU: Unsupported number of the " + "siblings %d", smp_num_siblings); smp_num_siblings = 1; return; } index_msb = get_count_order(smp_num_siblings); - phys_proc_id[cpu] = phys_pkg_id((ebx >> 24) & 0xFF, index_msb); + c->phys_proc_id = phys_pkg_id((ebx >> 24) & 0xFF, index_msb); printk(KERN_INFO "CPU: Physical Processor ID: %d\n", - phys_proc_id[cpu]); + c->phys_proc_id); smp_num_siblings = smp_num_siblings / c->x86_max_cores; @@ -509,12 +508,12 @@ void __cpuinit detect_ht(struct cpuinfo_x86 *c) core_bits = get_count_order(c->x86_max_cores); - cpu_core_id[cpu] = phys_pkg_id((ebx >> 24) & 0xFF, index_msb) & + c->cpu_core_id = phys_pkg_id((ebx >> 24) & 0xFF, index_msb) & ((1 << core_bits) - 1); if (c->x86_max_cores > 1) printk(KERN_INFO "CPU: Processor Core ID: %d\n", - cpu_core_id[cpu]); + c->cpu_core_id); } } #endif @@ -613,6 +612,12 @@ void __cpuinit cpu_init(void) set_in_cr4(X86_CR4_TSD); } + /* The CPU hotplug case */ + if (cpu_gdt_descr->address) { + gdt = (struct desc_struct *)cpu_gdt_descr->address; + memset(gdt, 0, PAGE_SIZE); + goto old_gdt; + } /* * This is a horrible hack to allocate the GDT. The problem * is that cpu_init() is called really early for the boot CPU @@ -631,7 +636,7 @@ void __cpuinit cpu_init(void) local_irq_enable(); } } - +old_gdt: /* * Initialize the per-CPU GDT with the boot GDT, * and set up the GDT descriptor: diff --git a/arch/i386/kernel/cpu/cyrix.c b/arch/i386/kernel/cpu/cyrix.c index fc32c8028e2..f03b7f94c30 100644 --- a/arch/i386/kernel/cpu/cyrix.c +++ b/arch/i386/kernel/cpu/cyrix.c @@ -354,7 +354,7 @@ static void __init init_nsc(struct cpuinfo_x86 *c) * This function only handles the GX processor, and kicks every * thing else to the Cyrix init function above - that should * cover any processors that might have been branded differently - * after NSC aquired Cyrix. + * after NSC acquired Cyrix. * * If this breaks your GX1 horribly, please e-mail * info-linux@ldcmail.amd.com to tell us. diff --git a/arch/i386/kernel/cpu/intel.c b/arch/i386/kernel/cpu/intel.c index 5386b29bb5a..10afc645c54 100644 --- a/arch/i386/kernel/cpu/intel.c +++ b/arch/i386/kernel/cpu/intel.c @@ -122,6 +122,12 @@ static void __cpuinit init_intel(struct cpuinfo_x86 *c) select_idle_routine(c); l2 = init_intel_cacheinfo(c); + if (c->cpuid_level > 9 ) { + unsigned eax = cpuid_eax(10); + /* Check for version and the number of counters */ + if ((eax & 0xff) && (((eax>>8) & 0xff) > 1)) + set_bit(X86_FEATURE_ARCH_PERFMON, c->x86_capability); + } /* SEP CPUID bug: Pentium Pro reports SEP but doesn't have it until model 3 mask 3 */ if ((c->x86<<8 | c->x86_model<<4 | c->x86_mask) < 0x633) diff --git a/arch/i386/kernel/cpu/intel_cacheinfo.c b/arch/i386/kernel/cpu/intel_cacheinfo.c index c8547a6fa7e..e9f0b928b0a 100644 --- a/arch/i386/kernel/cpu/intel_cacheinfo.c +++ b/arch/i386/kernel/cpu/intel_cacheinfo.c @@ -4,6 +4,7 @@ * Changes: * Venkatesh Pallipadi : Adding cache identification through cpuid(4) * Ashok Raj <ashok.raj@intel.com>: Work with CPU hotplug infrastructure. + * Andi Kleen : CPUID4 emulation on AMD. */ #include <linux/init.h> @@ -130,25 +131,111 @@ struct _cpuid4_info { cpumask_t shared_cpu_map; }; -static unsigned short num_cache_leaves; +unsigned short num_cache_leaves; + +/* AMD doesn't have CPUID4. Emulate it here to report the same + information to the user. This makes some assumptions about the machine: + No L3, L2 not shared, no SMT etc. that is currently true on AMD CPUs. + + In theory the TLBs could be reported as fake type (they are in "dummy"). + Maybe later */ +union l1_cache { + struct { + unsigned line_size : 8; + unsigned lines_per_tag : 8; + unsigned assoc : 8; + unsigned size_in_kb : 8; + }; + unsigned val; +}; + +union l2_cache { + struct { + unsigned line_size : 8; + unsigned lines_per_tag : 4; + unsigned assoc : 4; + unsigned size_in_kb : 16; + }; + unsigned val; +}; + +static const unsigned short assocs[] = { + [1] = 1, [2] = 2, [4] = 4, [6] = 8, + [8] = 16, + [0xf] = 0xffff // ?? + }; +static const unsigned char levels[] = { 1, 1, 2 }; +static const unsigned char types[] = { 1, 2, 3 }; + +static void __cpuinit amd_cpuid4(int leaf, union _cpuid4_leaf_eax *eax, + union _cpuid4_leaf_ebx *ebx, + union _cpuid4_leaf_ecx *ecx) +{ + unsigned dummy; + unsigned line_size, lines_per_tag, assoc, size_in_kb; + union l1_cache l1i, l1d; + union l2_cache l2; + + eax->full = 0; + ebx->full = 0; + ecx->full = 0; + + cpuid(0x80000005, &dummy, &dummy, &l1d.val, &l1i.val); + cpuid(0x80000006, &dummy, &dummy, &l2.val, &dummy); + + if (leaf > 2 || !l1d.val || !l1i.val || !l2.val) + return; + + eax->split.is_self_initializing = 1; + eax->split.type = types[leaf]; + eax->split.level = levels[leaf]; + eax->split.num_threads_sharing = 0; + eax->split.num_cores_on_die = current_cpu_data.x86_max_cores - 1; + + if (leaf <= 1) { + union l1_cache *l1 = leaf == 0 ? &l1d : &l1i; + assoc = l1->assoc; + line_size = l1->line_size; + lines_per_tag = l1->lines_per_tag; + size_in_kb = l1->size_in_kb; + } else { + assoc = l2.assoc; + line_size = l2.line_size; + lines_per_tag = l2.lines_per_tag; + /* cpu_data has errata corrections for K7 applied */ + size_in_kb = current_cpu_data.x86_cache_size; + } + + if (assoc == 0xf) + eax->split.is_fully_associative = 1; + ebx->split.coherency_line_size = line_size - 1; + ebx->split.ways_of_associativity = assocs[assoc] - 1; + ebx->split.physical_line_partition = lines_per_tag - 1; + ecx->split.number_of_sets = (size_in_kb * 1024) / line_size / + (ebx->split.ways_of_associativity + 1) - 1; +} static int __cpuinit cpuid4_cache_lookup(int index, struct _cpuid4_info *this_leaf) { - unsigned int eax, ebx, ecx, edx; - union _cpuid4_leaf_eax cache_eax; + union _cpuid4_leaf_eax eax; + union _cpuid4_leaf_ebx ebx; + union _cpuid4_leaf_ecx ecx; + unsigned edx; - cpuid_count(4, index, &eax, &ebx, &ecx, &edx); - cache_eax.full = eax; - if (cache_eax.split.type == CACHE_TYPE_NULL) + if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD) + amd_cpuid4(index, &eax, &ebx, &ecx); + else + cpuid_count(4, index, &eax.full, &ebx.full, &ecx.full, &edx); + if (eax.split.type == CACHE_TYPE_NULL) return -EIO; /* better error ? */ - this_leaf->eax.full = eax; - this_leaf->ebx.full = ebx; - this_leaf->ecx.full = ecx; - this_leaf->size = (this_leaf->ecx.split.number_of_sets + 1) * - (this_leaf->ebx.split.coherency_line_size + 1) * - (this_leaf->ebx.split.physical_line_partition + 1) * - (this_leaf->ebx.split.ways_of_associativity + 1); + this_leaf->eax = eax; + this_leaf->ebx = ebx; + this_leaf->ecx = ecx; + this_leaf->size = (ecx.split.number_of_sets + 1) * + (ebx.split.coherency_line_size + 1) * + (ebx.split.physical_line_partition + 1) * + (ebx.split.ways_of_associativity + 1); return 0; } @@ -174,7 +261,7 @@ unsigned int __cpuinit init_intel_cacheinfo(struct cpuinfo_x86 *c) unsigned int new_l1d = 0, new_l1i = 0; /* Cache sizes from cpuid(4) */ unsigned int new_l2 = 0, new_l3 = 0, i; /* Cache sizes from cpuid(4) */ unsigned int l2_id = 0, l3_id = 0, num_threads_sharing, index_msb; -#ifdef CONFIG_SMP +#ifdef CONFIG_X86_HT unsigned int cpu = (c == &boot_cpu_data) ? 0 : (c - cpu_data); #endif @@ -296,14 +383,14 @@ unsigned int __cpuinit init_intel_cacheinfo(struct cpuinfo_x86 *c) if (new_l2) { l2 = new_l2; -#ifdef CONFIG_SMP +#ifdef CONFIG_X86_HT cpu_llc_id[cpu] = l2_id; #endif } if (new_l3) { l3 = new_l3; -#ifdef CONFIG_SMP +#ifdef CONFIG_X86_HT cpu_llc_id[cpu] = l3_id; #endif } @@ -642,7 +729,7 @@ static void __cpuexit cache_remove_dev(struct sys_device * sys_dev) return; } -static int cacheinfo_cpu_callback(struct notifier_block *nfb, +static int __cpuinit cacheinfo_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu) { unsigned int cpu = (unsigned long)hcpu; @@ -660,7 +747,7 @@ static int cacheinfo_cpu_callback(struct notifier_block *nfb, return NOTIFY_OK; } -static struct notifier_block cacheinfo_cpu_notifier = +static struct notifier_block __cpuinitdata cacheinfo_cpu_notifier = { .notifier_call = cacheinfo_cpu_callback, }; diff --git a/arch/i386/kernel/cpu/proc.c b/arch/i386/kernel/cpu/proc.c index a19fcb262db..f54a15268ed 100644 --- a/arch/i386/kernel/cpu/proc.c +++ b/arch/i386/kernel/cpu/proc.c @@ -18,7 +18,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) * applications want to get the raw CPUID data, they should access * /dev/cpu/<cpu_nr>/cpuid instead. */ - static char *x86_cap_flags[] = { + static const char * const x86_cap_flags[] = { /* Intel-defined */ "fpu", "vme", "de", "pse", "tsc", "msr", "pae", "mce", "cx8", "apic", NULL, "sep", "mtrr", "pge", "mca", "cmov", @@ -62,7 +62,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, }; - static char *x86_power_flags[] = { + static const char * const x86_power_flags[] = { "ts", /* temperature sensor */ "fid", /* frequency id control */ "vid", /* voltage id control */ @@ -109,9 +109,9 @@ static int show_cpuinfo(struct seq_file *m, void *v) seq_printf(m, "cache size\t: %d KB\n", c->x86_cache_size); #ifdef CONFIG_X86_HT if (c->x86_max_cores * smp_num_siblings > 1) { - seq_printf(m, "physical id\t: %d\n", phys_proc_id[n]); + seq_printf(m, "physical id\t: %d\n", c->phys_proc_id); seq_printf(m, "siblings\t: %d\n", cpus_weight(cpu_core_map[n])); - seq_printf(m, "core id\t\t: %d\n", cpu_core_id[n]); + seq_printf(m, "core id\t\t: %d\n", c->cpu_core_id); seq_printf(m, "cpu cores\t: %d\n", c->booted_cores); } #endif diff --git a/arch/i386/kernel/cpuid.c b/arch/i386/kernel/cpuid.c index 1d9a4abcdfc..f6dfa9fb675 100644 --- a/arch/i386/kernel/cpuid.c +++ b/arch/i386/kernel/cpuid.c @@ -183,7 +183,7 @@ static int cpuid_class_cpu_callback(struct notifier_block *nfb, unsigned long ac return NOTIFY_OK; } -static struct notifier_block cpuid_class_cpu_notifier = +static struct notifier_block __cpuinitdata cpuid_class_cpu_notifier = { .notifier_call = cpuid_class_cpu_callback, }; diff --git a/arch/i386/kernel/crash.c b/arch/i386/kernel/crash.c index 21dc1bbb806..48f0f62f781 100644 --- a/arch/i386/kernel/crash.c +++ b/arch/i386/kernel/crash.c @@ -120,14 +120,9 @@ static int crash_nmi_callback(struct pt_regs *regs, int cpu) return 1; } -/* - * By using the NMI code instead of a vector we just sneak thru the - * word generator coming out with just what we want. AND it does - * not matter if clustered_apic_mode is set or not. - */ static void smp_send_nmi_allbutself(void) { - send_IPI_allbutself(APIC_DM_NMI); + send_IPI_allbutself(NMI_VECTOR); } static void nmi_shootdown_cpus(void) @@ -163,7 +158,7 @@ static void nmi_shootdown_cpus(void) void machine_crash_shutdown(struct pt_regs *regs) { /* This function is only called after the system - * has paniced or is otherwise in a critical state. + * has panicked or is otherwise in a critical state. * The minimum amount of code to allow a kexec'd kernel * to run successfully needs to happen here. * diff --git a/arch/i386/kernel/entry.S b/arch/i386/kernel/entry.S index cfc683f153b..fbdb933251b 100644 --- a/arch/i386/kernel/entry.S +++ b/arch/i386/kernel/entry.S @@ -48,6 +48,7 @@ #include <asm/smp.h> #include <asm/page.h> #include <asm/desc.h> +#include <asm/dwarf2.h> #include "irq_vectors.h" #define nr_syscalls ((syscall_table_size)/4) @@ -82,34 +83,76 @@ VM_MASK = 0x00020000 #define resume_kernel restore_nocheck #endif +#ifdef CONFIG_VM86 +#define resume_userspace_sig check_userspace +#else +#define resume_userspace_sig resume_userspace +#endif + #define SAVE_ALL \ cld; \ pushl %es; \ + CFI_ADJUST_CFA_OFFSET 4;\ + /*CFI_REL_OFFSET es, 0;*/\ pushl %ds; \ + CFI_ADJUST_CFA_OFFSET 4;\ + /*CFI_REL_OFFSET ds, 0;*/\ pushl %eax; \ + CFI_ADJUST_CFA_OFFSET 4;\ + CFI_REL_OFFSET eax, 0;\ pushl %ebp; \ + CFI_ADJUST_CFA_OFFSET 4;\ + CFI_REL_OFFSET ebp, 0;\ pushl %edi; \ + CFI_ADJUST_CFA_OFFSET 4;\ + CFI_REL_OFFSET edi, 0;\ pushl %esi; \ + CFI_ADJUST_CFA_OFFSET 4;\ + CFI_REL_OFFSET esi, 0;\ pushl %edx; \ + CFI_ADJUST_CFA_OFFSET 4;\ + CFI_REL_OFFSET edx, 0;\ pushl %ecx; \ + CFI_ADJUST_CFA_OFFSET 4;\ + CFI_REL_OFFSET ecx, 0;\ pushl %ebx; \ + CFI_ADJUST_CFA_OFFSET 4;\ + CFI_REL_OFFSET ebx, 0;\ movl $(__USER_DS), %edx; \ movl %edx, %ds; \ movl %edx, %es; #define RESTORE_INT_REGS \ popl %ebx; \ + CFI_ADJUST_CFA_OFFSET -4;\ + CFI_RESTORE ebx;\ popl %ecx; \ + CFI_ADJUST_CFA_OFFSET -4;\ + CFI_RESTORE ecx;\ popl %edx; \ + CFI_ADJUST_CFA_OFFSET -4;\ + CFI_RESTORE edx;\ popl %esi; \ + CFI_ADJUST_CFA_OFFSET -4;\ + CFI_RESTORE esi;\ popl %edi; \ + CFI_ADJUST_CFA_OFFSET -4;\ + CFI_RESTORE edi;\ popl %ebp; \ - popl %eax + CFI_ADJUST_CFA_OFFSET -4;\ + CFI_RESTORE ebp;\ + popl %eax; \ + CFI_ADJUST_CFA_OFFSET -4;\ + CFI_RESTORE eax #define RESTORE_REGS \ RESTORE_INT_REGS; \ 1: popl %ds; \ + CFI_ADJUST_CFA_OFFSET -4;\ + /*CFI_RESTORE ds;*/\ 2: popl %es; \ + CFI_ADJUST_CFA_OFFSET -4;\ + /*CFI_RESTORE es;*/\ .section .fixup,"ax"; \ 3: movl $0,(%esp); \ jmp 1b; \ @@ -122,13 +165,43 @@ VM_MASK = 0x00020000 .long 2b,4b; \ .previous +#define RING0_INT_FRAME \ + CFI_STARTPROC simple;\ + CFI_DEF_CFA esp, 3*4;\ + /*CFI_OFFSET cs, -2*4;*/\ + CFI_OFFSET eip, -3*4 + +#define RING0_EC_FRAME \ + CFI_STARTPROC simple;\ + CFI_DEF_CFA esp, 4*4;\ + /*CFI_OFFSET cs, -2*4;*/\ + CFI_OFFSET eip, -3*4 + +#define RING0_PTREGS_FRAME \ + CFI_STARTPROC simple;\ + CFI_DEF_CFA esp, OLDESP-EBX;\ + /*CFI_OFFSET cs, CS-OLDESP;*/\ + CFI_OFFSET eip, EIP-OLDESP;\ + /*CFI_OFFSET es, ES-OLDESP;*/\ + /*CFI_OFFSET ds, DS-OLDESP;*/\ + CFI_OFFSET eax, EAX-OLDESP;\ + CFI_OFFSET ebp, EBP-OLDESP;\ + CFI_OFFSET edi, EDI-OLDESP;\ + CFI_OFFSET esi, ESI-OLDESP;\ + CFI_OFFSET edx, EDX-OLDESP;\ + CFI_OFFSET ecx, ECX-OLDESP;\ + CFI_OFFSET ebx, EBX-OLDESP ENTRY(ret_from_fork) + CFI_STARTPROC pushl %eax + CFI_ADJUST_CFA_OFFSET -4 call schedule_tail GET_THREAD_INFO(%ebp) popl %eax + CFI_ADJUST_CFA_OFFSET -4 jmp syscall_exit + CFI_ENDPROC /* * Return to user mode is not as complex as all this looks, @@ -139,10 +212,12 @@ ENTRY(ret_from_fork) # userspace resumption stub bypassing syscall exit tracing ALIGN + RING0_PTREGS_FRAME ret_from_exception: preempt_stop ret_from_intr: GET_THREAD_INFO(%ebp) +check_userspace: movl EFLAGS(%esp), %eax # mix EFLAGS and CS movb CS(%esp), %al testl $(VM_MASK | 3), %eax @@ -171,20 +246,38 @@ need_resched: call preempt_schedule_irq jmp need_resched #endif + CFI_ENDPROC /* SYSENTER_RETURN points to after the "sysenter" instruction in the vsyscall page. See vsyscall-sysentry.S, which defines the symbol. */ # sysenter call handler stub ENTRY(sysenter_entry) + CFI_STARTPROC simple + CFI_DEF_CFA esp, 0 + CFI_REGISTER esp, ebp movl TSS_sysenter_esp0(%esp),%esp sysenter_past_esp: sti pushl $(__USER_DS) + CFI_ADJUST_CFA_OFFSET 4 + /*CFI_REL_OFFSET ss, 0*/ pushl %ebp + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET esp, 0 pushfl + CFI_ADJUST_CFA_OFFSET 4 pushl $(__USER_CS) - pushl $SYSENTER_RETURN + CFI_ADJUST_CFA_OFFSET 4 + /*CFI_REL_OFFSET cs, 0*/ + /* + * Push current_thread_info()->sysenter_return to the stack. + * A tiny bit of offset fixup is necessary - 4*4 means the 4 words + * pushed above; +8 corresponds to copy_thread's esp0 setting. + */ + pushl (TI_sysenter_return-THREAD_SIZE+8+4*4)(%esp) + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET eip, 0 /* * Load the potential sixth argument from user stack. @@ -199,6 +292,7 @@ sysenter_past_esp: .previous pushl %eax + CFI_ADJUST_CFA_OFFSET 4 SAVE_ALL GET_THREAD_INFO(%ebp) @@ -219,11 +313,14 @@ sysenter_past_esp: xorl %ebp,%ebp sti sysexit + CFI_ENDPROC # system call handler stub ENTRY(system_call) + RING0_INT_FRAME # can't unwind into user space anyway pushl %eax # save orig_eax + CFI_ADJUST_CFA_OFFSET 4 SAVE_ALL GET_THREAD_INFO(%ebp) testl $TF_MASK,EFLAGS(%esp) @@ -256,10 +353,12 @@ restore_all: movb CS(%esp), %al andl $(VM_MASK | (4 << 8) | 3), %eax cmpl $((4 << 8) | 3), %eax + CFI_REMEMBER_STATE je ldt_ss # returning to user-space with LDT SS restore_nocheck: RESTORE_REGS addl $4, %esp + CFI_ADJUST_CFA_OFFSET -4 1: iret .section .fixup,"ax" iret_exc: @@ -273,6 +372,7 @@ iret_exc: .long 1b,iret_exc .previous + CFI_RESTORE_STATE ldt_ss: larl OLDSS(%esp), %eax jnz restore_nocheck @@ -285,11 +385,13 @@ ldt_ss: * CPUs, which we can try to work around to make * dosemu and wine happy. */ subl $8, %esp # reserve space for switch16 pointer + CFI_ADJUST_CFA_OFFSET 8 cli movl %esp, %eax /* Set up the 16bit stack frame with switch32 pointer on top, * and a switch16 pointer on top of the current frame. */ call setup_x86_bogus_stack + CFI_ADJUST_CFA_OFFSET -8 # frame has moved RESTORE_REGS lss 20+4(%esp), %esp # switch to 16bit stack 1: iret @@ -297,9 +399,11 @@ ldt_ss: .align 4 .long 1b,iret_exc .previous + CFI_ENDPROC # perform work that needs to be done immediately before resumption ALIGN + RING0_PTREGS_FRAME # can't unwind into user space anyway work_pending: testb $_TIF_NEED_RESCHED, %cl jz work_notifysig @@ -323,18 +427,20 @@ work_notifysig: # deal with pending signals and # vm86-space xorl %edx, %edx call do_notify_resume - jmp resume_userspace + jmp resume_userspace_sig ALIGN work_notifysig_v86: #ifdef CONFIG_VM86 pushl %ecx # save ti_flags for do_notify_resume + CFI_ADJUST_CFA_OFFSET 4 call save_v86_state # %eax contains pt_regs pointer popl %ecx + CFI_ADJUST_CFA_OFFSET -4 movl %eax, %esp xorl %edx, %edx call do_notify_resume - jmp resume_userspace + jmp resume_userspace_sig #endif # perform syscall exit tracing @@ -363,19 +469,21 @@ syscall_exit_work: movl $1, %edx call do_syscall_trace jmp resume_userspace + CFI_ENDPROC - ALIGN + RING0_INT_FRAME # can't unwind into user space anyway syscall_fault: pushl %eax # save orig_eax + CFI_ADJUST_CFA_OFFSET 4 SAVE_ALL GET_THREAD_INFO(%ebp) movl $-EFAULT,EAX(%esp) jmp resume_userspace - ALIGN syscall_badsys: movl $-ENOSYS,EAX(%esp) jmp resume_userspace + CFI_ENDPROC #define FIXUP_ESPFIX_STACK \ movl %esp, %eax; \ @@ -387,16 +495,21 @@ syscall_badsys: movl %eax, %esp; #define UNWIND_ESPFIX_STACK \ pushl %eax; \ + CFI_ADJUST_CFA_OFFSET 4; \ movl %ss, %eax; \ /* see if on 16bit stack */ \ cmpw $__ESPFIX_SS, %ax; \ - jne 28f; \ - movl $__KERNEL_DS, %edx; \ - movl %edx, %ds; \ - movl %edx, %es; \ + je 28f; \ +27: popl %eax; \ + CFI_ADJUST_CFA_OFFSET -4; \ +.section .fixup,"ax"; \ +28: movl $__KERNEL_DS, %eax; \ + movl %eax, %ds; \ + movl %eax, %es; \ /* switch to 32bit stack */ \ - FIXUP_ESPFIX_STACK \ -28: popl %eax; + FIXUP_ESPFIX_STACK; \ + jmp 27b; \ +.previous /* * Build the entry stubs and pointer table with @@ -408,9 +521,14 @@ ENTRY(interrupt) vector=0 ENTRY(irq_entries_start) + RING0_INT_FRAME .rept NR_IRQS ALIGN -1: pushl $vector-256 + .if vector + CFI_ADJUST_CFA_OFFSET -4 + .endif +1: pushl $~(vector) + CFI_ADJUST_CFA_OFFSET 4 jmp common_interrupt .data .long 1b @@ -424,60 +542,99 @@ common_interrupt: movl %esp,%eax call do_IRQ jmp ret_from_intr + CFI_ENDPROC #define BUILD_INTERRUPT(name, nr) \ ENTRY(name) \ - pushl $nr-256; \ - SAVE_ALL \ + RING0_INT_FRAME; \ + pushl $~(nr); \ + CFI_ADJUST_CFA_OFFSET 4; \ + SAVE_ALL; \ movl %esp,%eax; \ call smp_/**/name; \ - jmp ret_from_intr; + jmp ret_from_intr; \ + CFI_ENDPROC /* The include is where all of the SMP etc. interrupts come from */ #include "entry_arch.h" ENTRY(divide_error) + RING0_INT_FRAME pushl $0 # no error code + CFI_ADJUST_CFA_OFFSET 4 pushl $do_divide_error + CFI_ADJUST_CFA_OFFSET 4 ALIGN error_code: pushl %ds + CFI_ADJUST_CFA_OFFSET 4 + /*CFI_REL_OFFSET ds, 0*/ pushl %eax + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET eax, 0 xorl %eax, %eax pushl %ebp + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET ebp, 0 pushl %edi + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET edi, 0 pushl %esi + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET esi, 0 pushl %edx + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET edx, 0 decl %eax # eax = -1 pushl %ecx + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET ecx, 0 pushl %ebx + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET ebx, 0 cld pushl %es + CFI_ADJUST_CFA_OFFSET 4 + /*CFI_REL_OFFSET es, 0*/ UNWIND_ESPFIX_STACK popl %ecx + CFI_ADJUST_CFA_OFFSET -4 + /*CFI_REGISTER es, ecx*/ movl ES(%esp), %edi # get the function address movl ORIG_EAX(%esp), %edx # get the error code movl %eax, ORIG_EAX(%esp) movl %ecx, ES(%esp) + /*CFI_REL_OFFSET es, ES*/ movl $(__USER_DS), %ecx movl %ecx, %ds movl %ecx, %es movl %esp,%eax # pt_regs pointer call *%edi jmp ret_from_exception + CFI_ENDPROC ENTRY(coprocessor_error) + RING0_INT_FRAME pushl $0 + CFI_ADJUST_CFA_OFFSET 4 pushl $do_coprocessor_error + CFI_ADJUST_CFA_OFFSET 4 jmp error_code + CFI_ENDPROC ENTRY(simd_coprocessor_error) + RING0_INT_FRAME pushl $0 + CFI_ADJUST_CFA_OFFSET 4 pushl $do_simd_coprocessor_error + CFI_ADJUST_CFA_OFFSET 4 jmp error_code + CFI_ENDPROC ENTRY(device_not_available) + RING0_INT_FRAME pushl $-1 # mark this as an int + CFI_ADJUST_CFA_OFFSET 4 SAVE_ALL movl %cr0, %eax testl $0x4, %eax # EM (math emulation bit) @@ -487,9 +644,12 @@ ENTRY(device_not_available) jmp ret_from_exception device_not_available_emulate: pushl $0 # temporary storage for ORIG_EIP + CFI_ADJUST_CFA_OFFSET 4 call math_emulate addl $4, %esp + CFI_ADJUST_CFA_OFFSET -4 jmp ret_from_exception + CFI_ENDPROC /* * Debug traps and NMI can happen at the one SYSENTER instruction @@ -514,16 +674,19 @@ label: \ pushl $sysenter_past_esp KPROBE_ENTRY(debug) + RING0_INT_FRAME cmpl $sysenter_entry,(%esp) jne debug_stack_correct FIX_STACK(12, debug_stack_correct, debug_esp_fix_insn) debug_stack_correct: pushl $-1 # mark this as an int + CFI_ADJUST_CFA_OFFSET 4 SAVE_ALL xorl %edx,%edx # error code 0 movl %esp,%eax # pt_regs pointer call do_debug jmp ret_from_exception + CFI_ENDPROC .previous .text /* * NMI is doubly nasty. It can happen _while_ we're handling @@ -534,14 +697,18 @@ debug_stack_correct: * fault happened on the sysenter path. */ ENTRY(nmi) + RING0_INT_FRAME pushl %eax + CFI_ADJUST_CFA_OFFSET 4 movl %ss, %eax cmpw $__ESPFIX_SS, %ax popl %eax + CFI_ADJUST_CFA_OFFSET -4 je nmi_16bit_stack cmpl $sysenter_entry,(%esp) je nmi_stack_fixup pushl %eax + CFI_ADJUST_CFA_OFFSET 4 movl %esp,%eax /* Do not access memory above the end of our stack page, * it might not exist. @@ -549,16 +716,19 @@ ENTRY(nmi) andl $(THREAD_SIZE-1),%eax cmpl $(THREAD_SIZE-20),%eax popl %eax + CFI_ADJUST_CFA_OFFSET -4 jae nmi_stack_correct cmpl $sysenter_entry,12(%esp) je nmi_debug_stack_check nmi_stack_correct: pushl %eax + CFI_ADJUST_CFA_OFFSET 4 SAVE_ALL xorl %edx,%edx # zero error code movl %esp,%eax # pt_regs pointer call do_nmi jmp restore_all + CFI_ENDPROC nmi_stack_fixup: FIX_STACK(12,nmi_stack_correct, 1) @@ -574,94 +744,177 @@ nmi_debug_stack_check: jmp nmi_stack_correct nmi_16bit_stack: + RING0_INT_FRAME /* create the pointer to lss back */ pushl %ss + CFI_ADJUST_CFA_OFFSET 4 pushl %esp + CFI_ADJUST_CFA_OFFSET 4 movzwl %sp, %esp addw $4, (%esp) /* copy the iret frame of 12 bytes */ .rept 3 pushl 16(%esp) + CFI_ADJUST_CFA_OFFSET 4 .endr pushl %eax + CFI_ADJUST_CFA_OFFSET 4 SAVE_ALL FIXUP_ESPFIX_STACK # %eax == %esp + CFI_ADJUST_CFA_OFFSET -20 # the frame has now moved xorl %edx,%edx # zero error code call do_nmi RESTORE_REGS lss 12+4(%esp), %esp # back to 16bit stack 1: iret + CFI_ENDPROC .section __ex_table,"a" .align 4 .long 1b,iret_exc .previous KPROBE_ENTRY(int3) + RING0_INT_FRAME pushl $-1 # mark this as an int + CFI_ADJUST_CFA_OFFSET 4 SAVE_ALL xorl %edx,%edx # zero error code movl %esp,%eax # pt_regs pointer call do_int3 jmp ret_from_exception + CFI_ENDPROC .previous .text ENTRY(overflow) + RING0_INT_FRAME pushl $0 + CFI_ADJUST_CFA_OFFSET 4 pushl $do_overflow + CFI_ADJUST_CFA_OFFSET 4 jmp error_code + CFI_ENDPROC ENTRY(bounds) + RING0_INT_FRAME pushl $0 + CFI_ADJUST_CFA_OFFSET 4 pushl $do_bounds + CFI_ADJUST_CFA_OFFSET 4 jmp error_code + CFI_ENDPROC ENTRY(invalid_op) + RING0_INT_FRAME pushl $0 + CFI_ADJUST_CFA_OFFSET 4 pushl $do_invalid_op + CFI_ADJUST_CFA_OFFSET 4 jmp error_code + CFI_ENDPROC ENTRY(coprocessor_segment_overrun) + RING0_INT_FRAME pushl $0 + CFI_ADJUST_CFA_OFFSET 4 pushl $do_coprocessor_segment_overrun + CFI_ADJUST_CFA_OFFSET 4 jmp error_code + CFI_ENDPROC ENTRY(invalid_TSS) + RING0_EC_FRAME pushl $do_invalid_TSS + CFI_ADJUST_CFA_OFFSET 4 jmp error_code + CFI_ENDPROC ENTRY(segment_not_present) + RING0_EC_FRAME pushl $do_segment_not_present + CFI_ADJUST_CFA_OFFSET 4 jmp error_code + CFI_ENDPROC ENTRY(stack_segment) + RING0_EC_FRAME pushl $do_stack_segment + CFI_ADJUST_CFA_OFFSET 4 jmp error_code + CFI_ENDPROC KPROBE_ENTRY(general_protection) + RING0_EC_FRAME pushl $do_general_protection + CFI_ADJUST_CFA_OFFSET 4 jmp error_code + CFI_ENDPROC .previous .text ENTRY(alignment_check) + RING0_EC_FRAME pushl $do_alignment_check + CFI_ADJUST_CFA_OFFSET 4 jmp error_code + CFI_ENDPROC KPROBE_ENTRY(page_fault) + RING0_EC_FRAME pushl $do_page_fault + CFI_ADJUST_CFA_OFFSET 4 jmp error_code + CFI_ENDPROC .previous .text #ifdef CONFIG_X86_MCE ENTRY(machine_check) + RING0_INT_FRAME pushl $0 + CFI_ADJUST_CFA_OFFSET 4 pushl machine_check_vector + CFI_ADJUST_CFA_OFFSET 4 jmp error_code + CFI_ENDPROC #endif ENTRY(spurious_interrupt_bug) + RING0_INT_FRAME pushl $0 + CFI_ADJUST_CFA_OFFSET 4 pushl $do_spurious_interrupt_bug + CFI_ADJUST_CFA_OFFSET 4 jmp error_code + CFI_ENDPROC + +#ifdef CONFIG_STACK_UNWIND +ENTRY(arch_unwind_init_running) + CFI_STARTPROC + movl 4(%esp), %edx + movl (%esp), %ecx + leal 4(%esp), %eax + movl %ebx, EBX(%edx) + xorl %ebx, %ebx + movl %ebx, ECX(%edx) + movl %ebx, EDX(%edx) + movl %esi, ESI(%edx) + movl %edi, EDI(%edx) + movl %ebp, EBP(%edx) + movl %ebx, EAX(%edx) + movl $__USER_DS, DS(%edx) + movl $__USER_DS, ES(%edx) + movl %ebx, ORIG_EAX(%edx) + movl %ecx, EIP(%edx) + movl 12(%esp), %ecx + movl $__KERNEL_CS, CS(%edx) + movl %ebx, EFLAGS(%edx) + movl %eax, OLDESP(%edx) + movl 8(%esp), %eax + movl %ecx, 8(%esp) + movl EBX(%edx), %ebx + movl $__KERNEL_DS, OLDSS(%edx) + jmpl *%eax + CFI_ENDPROC +ENDPROC(arch_unwind_init_running) +#endif .section .rodata,"a" #include "syscall_table.S" diff --git a/arch/i386/kernel/hpet.c b/arch/i386/kernel/hpet.c new file mode 100644 index 00000000000..c6737c35815 --- /dev/null +++ b/arch/i386/kernel/hpet.c @@ -0,0 +1,67 @@ +#include <linux/clocksource.h> +#include <linux/errno.h> +#include <linux/hpet.h> +#include <linux/init.h> + +#include <asm/hpet.h> +#include <asm/io.h> + +#define HPET_MASK CLOCKSOURCE_MASK(32) +#define HPET_SHIFT 22 + +/* FSEC = 10^-15 NSEC = 10^-9 */ +#define FSEC_PER_NSEC 1000000 + +static void *hpet_ptr; + +static cycle_t read_hpet(void) +{ + return (cycle_t)readl(hpet_ptr); +} + +static struct clocksource clocksource_hpet = { + .name = "hpet", + .rating = 250, + .read = read_hpet, + .mask = HPET_MASK, + .mult = 0, /* set below */ + .shift = HPET_SHIFT, + .is_continuous = 1, +}; + +static int __init init_hpet_clocksource(void) +{ + unsigned long hpet_period; + void __iomem* hpet_base; + u64 tmp; + + if (!hpet_address) + return -ENODEV; + + /* calculate the hpet address: */ + hpet_base = + (void __iomem*)ioremap_nocache(hpet_address, HPET_MMAP_SIZE); + hpet_ptr = hpet_base + HPET_COUNTER; + + /* calculate the frequency: */ + hpet_period = readl(hpet_base + HPET_PERIOD); + + /* + * hpet period is in femto seconds per cycle + * so we need to convert this to ns/cyc units + * aproximated by mult/2^shift + * + * fsec/cyc * 1nsec/1000000fsec = nsec/cyc = mult/2^shift + * fsec/cyc * 1ns/1000000fsec * 2^shift = mult + * fsec/cyc * 2^shift * 1nsec/1000000fsec = mult + * (fsec/cyc << shift)/1000000 = mult + * (hpet_period << shift)/FSEC_PER_NSEC = mult + */ + tmp = (u64)hpet_period << HPET_SHIFT; + do_div(tmp, FSEC_PER_NSEC); + clocksource_hpet.mult = (u32)tmp; + + return clocksource_register(&clocksource_hpet); +} + +module_init(init_hpet_clocksource); diff --git a/arch/i386/kernel/i8253.c b/arch/i386/kernel/i8253.c new file mode 100644 index 00000000000..477b24daff5 --- /dev/null +++ b/arch/i386/kernel/i8253.c @@ -0,0 +1,118 @@ +/* + * i8253.c 8253/PIT functions + * + */ +#include <linux/clocksource.h> +#include <linux/spinlock.h> +#include <linux/jiffies.h> +#include <linux/sysdev.h> +#include <linux/module.h> +#include <linux/init.h> + +#include <asm/smp.h> +#include <asm/delay.h> +#include <asm/i8253.h> +#include <asm/io.h> + +#include "io_ports.h" + +DEFINE_SPINLOCK(i8253_lock); +EXPORT_SYMBOL(i8253_lock); + +void setup_pit_timer(void) +{ + unsigned long flags; + + spin_lock_irqsave(&i8253_lock, flags); + outb_p(0x34,PIT_MODE); /* binary, mode 2, LSB/MSB, ch 0 */ + udelay(10); + outb_p(LATCH & 0xff , PIT_CH0); /* LSB */ + udelay(10); + outb(LATCH >> 8 , PIT_CH0); /* MSB */ + spin_unlock_irqrestore(&i8253_lock, flags); +} + +/* + * Since the PIT overflows every tick, its not very useful + * to just read by itself. So use jiffies to emulate a free + * running counter: + */ +static cycle_t pit_read(void) +{ + unsigned long flags; + int count; + u32 jifs; + static int old_count; + static u32 old_jifs; + + spin_lock_irqsave(&i8253_lock, flags); + /* + * Although our caller may have the read side of xtime_lock, + * this is now a seqlock, and we are cheating in this routine + * by having side effects on state that we cannot undo if + * there is a collision on the seqlock and our caller has to + * retry. (Namely, old_jifs and old_count.) So we must treat + * jiffies as volatile despite the lock. We read jiffies + * before latching the timer count to guarantee that although + * the jiffies value might be older than the count (that is, + * the counter may underflow between the last point where + * jiffies was incremented and the point where we latch the + * count), it cannot be newer. + */ + jifs = jiffies; + outb_p(0x00, PIT_MODE); /* latch the count ASAP */ + count = inb_p(PIT_CH0); /* read the latched count */ + count |= inb_p(PIT_CH0) << 8; + + /* VIA686a test code... reset the latch if count > max + 1 */ + if (count > LATCH) { + outb_p(0x34, PIT_MODE); + outb_p(LATCH & 0xff, PIT_CH0); + outb(LATCH >> 8, PIT_CH0); + count = LATCH - 1; + } + + /* + * It's possible for count to appear to go the wrong way for a + * couple of reasons: + * + * 1. The timer counter underflows, but we haven't handled the + * resulting interrupt and incremented jiffies yet. + * 2. Hardware problem with the timer, not giving us continuous time, + * the counter does small "jumps" upwards on some Pentium systems, + * (see c't 95/10 page 335 for Neptun bug.) + * + * Previous attempts to handle these cases intelligently were + * buggy, so we just do the simple thing now. + */ + if (count > old_count && jifs == old_jifs) { + count = old_count; + } + old_count = count; + old_jifs = jifs; + + spin_unlock_irqrestore(&i8253_lock, flags); + + count = (LATCH - 1) - count; + + return (cycle_t)(jifs * LATCH) + count; +} + +static struct clocksource clocksource_pit = { + .name = "pit", + .rating = 110, + .read = pit_read, + .mask = CLOCKSOURCE_MASK(32), + .mult = 0, + .shift = 20, +}; + +static int __init init_pit_clocksource(void) +{ + if (num_possible_cpus() > 4) /* PIT does not scale! */ + return 0; + + clocksource_pit.mult = clocksource_hz2mult(CLOCK_TICK_RATE, 20); + return clocksource_register(&clocksource_pit); +} +module_init(init_pit_clocksource); diff --git a/arch/i386/kernel/i8259.c b/arch/i386/kernel/i8259.c index b7636b96e10..c1a42feba28 100644 --- a/arch/i386/kernel/i8259.c +++ b/arch/i386/kernel/i8259.c @@ -175,7 +175,7 @@ static void mask_and_ack_8259A(unsigned int irq) * Lightweight spurious IRQ detection. We do not want * to overdo spurious IRQ handling - it's usually a sign * of hardware problems, so we only do the checks we can - * do without slowing down good hardware unnecesserily. + * do without slowing down good hardware unnecessarily. * * Note that IRQ7 and IRQ15 (the two spurious IRQs * usually resulting from the 8259A-1|2 PICs) occur diff --git a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c index a62df3e764c..72ae414e4d4 100644 --- a/arch/i386/kernel/io_apic.c +++ b/arch/i386/kernel/io_apic.c @@ -38,6 +38,7 @@ #include <asm/desc.h> #include <asm/timer.h> #include <asm/i8259.h> +#include <asm/nmi.h> #include <mach_apic.h> @@ -50,6 +51,7 @@ atomic_t irq_mis_count; static struct { int pin, apic; } ioapic_i8259 = { -1, -1 }; static DEFINE_SPINLOCK(ioapic_lock); +static DEFINE_SPINLOCK(vector_lock); int timer_over_8254 __initdata = 1; @@ -1161,10 +1163,17 @@ u8 irq_vector[NR_IRQ_VECTORS] __read_mostly = { FIRST_DEVICE_VECTOR , 0 }; int assign_irq_vector(int irq) { static int current_vector = FIRST_DEVICE_VECTOR, offset = 0; + unsigned long flags; + int vector; + + BUG_ON(irq != AUTO_ASSIGN && (unsigned)irq >= NR_IRQ_VECTORS); - BUG_ON(irq >= NR_IRQ_VECTORS); - if (irq != AUTO_ASSIGN && IO_APIC_VECTOR(irq) > 0) + spin_lock_irqsave(&vector_lock, flags); + + if (irq != AUTO_ASSIGN && IO_APIC_VECTOR(irq) > 0) { + spin_unlock_irqrestore(&vector_lock, flags); return IO_APIC_VECTOR(irq); + } next: current_vector += 8; if (current_vector == SYSCALL_VECTOR) @@ -1172,16 +1181,21 @@ next: if (current_vector >= FIRST_SYSTEM_VECTOR) { offset++; - if (!(offset%8)) + if (!(offset%8)) { + spin_unlock_irqrestore(&vector_lock, flags); return -ENOSPC; + } current_vector = FIRST_DEVICE_VECTOR + offset; } - vector_irq[current_vector] = irq; + vector = current_vector; + vector_irq[vector] = irq; if (irq != AUTO_ASSIGN) - IO_APIC_VECTOR(irq) = current_vector; + IO_APIC_VECTOR(irq) = vector; - return current_vector; + spin_unlock_irqrestore(&vector_lock, flags); + + return vector; } static struct hw_interrupt_type ioapic_level_type; @@ -1193,21 +1207,14 @@ static struct hw_interrupt_type ioapic_edge_type; static inline void ioapic_register_intr(int irq, int vector, unsigned long trigger) { - if (use_pci_vector() && !platform_legacy_irq(irq)) { - if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) || - trigger == IOAPIC_LEVEL) - irq_desc[vector].handler = &ioapic_level_type; - else - irq_desc[vector].handler = &ioapic_edge_type; - set_intr_gate(vector, interrupt[vector]); - } else { - if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) || - trigger == IOAPIC_LEVEL) - irq_desc[irq].handler = &ioapic_level_type; - else - irq_desc[irq].handler = &ioapic_edge_type; - set_intr_gate(vector, interrupt[irq]); - } + unsigned idx = use_pci_vector() && !platform_legacy_irq(irq) ? vector : irq; + + if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) || + trigger == IOAPIC_LEVEL) + irq_desc[idx].handler = &ioapic_level_type; + else + irq_desc[idx].handler = &ioapic_edge_type; + set_intr_gate(vector, interrupt[idx]); } static void __init setup_IO_APIC_irqs(void) diff --git a/arch/i386/kernel/irq.c b/arch/i386/kernel/irq.c index 49ce4c31b71..c703bc7b088 100644 --- a/arch/i386/kernel/irq.c +++ b/arch/i386/kernel/irq.c @@ -53,8 +53,8 @@ static union irq_ctx *softirq_ctx[NR_CPUS] __read_mostly; */ fastcall unsigned int do_IRQ(struct pt_regs *regs) { - /* high bits used in ret_from_ code */ - int irq = regs->orig_eax & 0xff; + /* high bit used in ret_from_ code */ + int irq = ~regs->orig_eax; #ifdef CONFIG_4KSTACKS union irq_ctx *curctx, *irqctx; u32 *isp; @@ -100,8 +100,8 @@ fastcall unsigned int do_IRQ(struct pt_regs *regs) * softirq checks work in the hardirq context. */ irqctx->tinfo.preempt_count = - irqctx->tinfo.preempt_count & ~SOFTIRQ_MASK | - curctx->tinfo.preempt_count & SOFTIRQ_MASK; + (irqctx->tinfo.preempt_count & ~SOFTIRQ_MASK) | + (curctx->tinfo.preempt_count & SOFTIRQ_MASK); asm volatile( " xchgl %%ebx,%%esp \n" @@ -227,7 +227,7 @@ int show_interrupts(struct seq_file *p, void *v) if (i == 0) { seq_printf(p, " "); for_each_online_cpu(j) - seq_printf(p, "CPU%d ",j); + seq_printf(p, "CPU%-8d",j); seq_putc(p, '\n'); } diff --git a/arch/i386/kernel/kprobes.c b/arch/i386/kernel/kprobes.c index 395a9a6dff8..727e419ad78 100644 --- a/arch/i386/kernel/kprobes.c +++ b/arch/i386/kernel/kprobes.c @@ -57,34 +57,85 @@ static __always_inline void set_jmp_op(void *from, void *to) /* * returns non-zero if opcodes can be boosted. */ -static __always_inline int can_boost(kprobe_opcode_t opcode) +static __always_inline int can_boost(kprobe_opcode_t *opcodes) { - switch (opcode & 0xf0 ) { +#define W(row,b0,b1,b2,b3,b4,b5,b6,b7,b8,b9,ba,bb,bc,bd,be,bf) \ + (((b0##UL << 0x0)|(b1##UL << 0x1)|(b2##UL << 0x2)|(b3##UL << 0x3) | \ + (b4##UL << 0x4)|(b5##UL << 0x5)|(b6##UL << 0x6)|(b7##UL << 0x7) | \ + (b8##UL << 0x8)|(b9##UL << 0x9)|(ba##UL << 0xa)|(bb##UL << 0xb) | \ + (bc##UL << 0xc)|(bd##UL << 0xd)|(be##UL << 0xe)|(bf##UL << 0xf)) \ + << (row % 32)) + /* + * Undefined/reserved opcodes, conditional jump, Opcode Extension + * Groups, and some special opcodes can not be boost. + */ + static const unsigned long twobyte_is_boostable[256 / 32] = { + /* 0 1 2 3 4 5 6 7 8 9 a b c d e f */ + /* ------------------------------- */ + W(0x00, 0,0,1,1,0,0,1,0,1,1,0,0,0,0,0,0)| /* 00 */ + W(0x10, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0), /* 10 */ + W(0x20, 1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0)| /* 20 */ + W(0x30, 0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0), /* 30 */ + W(0x40, 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1)| /* 40 */ + W(0x50, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0), /* 50 */ + W(0x60, 1,1,1,1,1,1,1,1,1,1,1,1,0,0,1,1)| /* 60 */ + W(0x70, 0,0,0,0,1,1,1,1,0,0,0,0,0,0,1,1), /* 70 */ + W(0x80, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0)| /* 80 */ + W(0x90, 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1), /* 90 */ + W(0xa0, 1,1,0,1,1,1,0,0,1,1,0,1,1,1,0,1)| /* a0 */ + W(0xb0, 1,1,1,1,1,1,1,1,0,0,0,1,1,1,1,1), /* b0 */ + W(0xc0, 1,1,0,0,0,0,0,0,1,1,1,1,1,1,1,1)| /* c0 */ + W(0xd0, 0,1,1,1,0,1,0,0,1,1,0,1,1,1,0,1), /* d0 */ + W(0xe0, 0,1,1,0,0,1,0,0,1,1,0,1,1,1,0,1)| /* e0 */ + W(0xf0, 0,1,1,1,0,1,0,0,1,1,1,0,1,1,1,0) /* f0 */ + /* ------------------------------- */ + /* 0 1 2 3 4 5 6 7 8 9 a b c d e f */ + }; +#undef W + kprobe_opcode_t opcode; + kprobe_opcode_t *orig_opcodes = opcodes; +retry: + if (opcodes - orig_opcodes > MAX_INSN_SIZE - 1) + return 0; + opcode = *(opcodes++); + + /* 2nd-byte opcode */ + if (opcode == 0x0f) { + if (opcodes - orig_opcodes > MAX_INSN_SIZE - 1) + return 0; + return test_bit(*opcodes, twobyte_is_boostable); + } + + switch (opcode & 0xf0) { + case 0x60: + if (0x63 < opcode && opcode < 0x67) + goto retry; /* prefixes */ + /* can't boost Address-size override and bound */ + return (opcode != 0x62 && opcode != 0x67); case 0x70: return 0; /* can't boost conditional jump */ - case 0x90: - /* can't boost call and pushf */ - return opcode != 0x9a && opcode != 0x9c; case 0xc0: - /* can't boost undefined opcodes and soft-interruptions */ - return (0xc1 < opcode && opcode < 0xc6) || - (0xc7 < opcode && opcode < 0xcc) || opcode == 0xcf; + /* can't boost software-interruptions */ + return (0xc1 < opcode && opcode < 0xcc) || opcode == 0xcf; case 0xd0: /* can boost AA* and XLAT */ return (opcode == 0xd4 || opcode == 0xd5 || opcode == 0xd7); case 0xe0: - /* can boost in/out and (may be) jmps */ - return (0xe3 < opcode && opcode != 0xe8); + /* can boost in/out and absolute jmps */ + return ((opcode & 0x04) || opcode == 0xea); case 0xf0: + if ((opcode & 0x0c) == 0 && opcode != 0xf1) + goto retry; /* lock/rep(ne) prefix */ /* clear and set flags can be boost */ return (opcode == 0xf5 || (0xf7 < opcode && opcode < 0xfe)); default: - /* currently, can't boost 2 bytes opcodes */ - return opcode != 0x0f; + if (opcode == 0x26 || opcode == 0x36 || opcode == 0x3e) + goto retry; /* prefixes */ + /* can't boost CS override and call */ + return (opcode != 0x2e && opcode != 0x9a); } } - /* * returns non-zero if opcode modifies the interrupt flag. */ @@ -109,7 +160,7 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p) memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t)); p->opcode = *p->addr; - if (can_boost(p->opcode)) { + if (can_boost(p->addr)) { p->ainsn.boostable = 0; } else { p->ainsn.boostable = -1; @@ -208,7 +259,9 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) struct kprobe_ctlblk *kcb; #ifdef CONFIG_PREEMPT unsigned pre_preempt_count = preempt_count(); -#endif /* CONFIG_PREEMPT */ +#else + unsigned pre_preempt_count = 1; +#endif addr = (kprobe_opcode_t *)(regs->eip - sizeof(kprobe_opcode_t)); @@ -285,22 +338,14 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) /* handler has already set things up, so skip ss setup */ return 1; - if (p->ainsn.boostable == 1 && -#ifdef CONFIG_PREEMPT - !(pre_preempt_count) && /* - * This enables booster when the direct - * execution path aren't preempted. - */ -#endif /* CONFIG_PREEMPT */ - !p->post_handler && !p->break_handler ) { +ss_probe: + if (pre_preempt_count && p->ainsn.boostable == 1 && !p->post_handler){ /* Boost up -- we can execute copied instructions directly */ reset_current_kprobe(); regs->eip = (unsigned long)p->ainsn.insn; preempt_enable_no_resched(); return 1; } - -ss_probe: prepare_singlestep(p, regs); kcb->kprobe_status = KPROBE_HIT_SS; return 1; diff --git a/arch/i386/kernel/machine_kexec.c b/arch/i386/kernel/machine_kexec.c index f73d7374a2b..511abe52a94 100644 --- a/arch/i386/kernel/machine_kexec.c +++ b/arch/i386/kernel/machine_kexec.c @@ -133,9 +133,9 @@ typedef asmlinkage NORET_TYPE void (*relocate_new_kernel_t)( unsigned long start_address, unsigned int has_pae) ATTRIB_NORET; -const extern unsigned char relocate_new_kernel[]; +extern const unsigned char relocate_new_kernel[]; extern void relocate_new_kernel_end(void); -const extern unsigned int relocate_new_kernel_size; +extern const unsigned int relocate_new_kernel_size; /* * A architecture hook called to validate the diff --git a/arch/i386/kernel/msr.c b/arch/i386/kernel/msr.c index 7a328230e54..d022cb8fd72 100644 --- a/arch/i386/kernel/msr.c +++ b/arch/i386/kernel/msr.c @@ -266,7 +266,7 @@ static int msr_class_cpu_callback(struct notifier_block *nfb, unsigned long acti return NOTIFY_OK; } -static struct notifier_block msr_class_cpu_notifier = +static struct notifier_block __cpuinitdata msr_class_cpu_notifier = { .notifier_call = msr_class_cpu_callback, }; diff --git a/arch/i386/kernel/nmi.c b/arch/i386/kernel/nmi.c index d43b498ec74..a76e9314658 100644 --- a/arch/i386/kernel/nmi.c +++ b/arch/i386/kernel/nmi.c @@ -14,21 +14,17 @@ */ #include <linux/config.h> -#include <linux/mm.h> #include <linux/delay.h> -#include <linux/bootmem.h> -#include <linux/smp_lock.h> #include <linux/interrupt.h> -#include <linux/mc146818rtc.h> -#include <linux/kernel_stat.h> #include <linux/module.h> #include <linux/nmi.h> #include <linux/sysdev.h> #include <linux/sysctl.h> +#include <linux/percpu.h> #include <asm/smp.h> -#include <asm/div64.h> #include <asm/nmi.h> +#include <asm/intel_arch_perfmon.h> #include "mach_traps.h" @@ -100,6 +96,9 @@ int nmi_active; (P4_CCCR_OVF_PMI0|P4_CCCR_THRESHOLD(15)|P4_CCCR_COMPLEMENT| \ P4_CCCR_COMPARE|P4_CCCR_REQUIRED|P4_CCCR_ESCR_SELECT(4)|P4_CCCR_ENABLE) +#define ARCH_PERFMON_NMI_EVENT_SEL ARCH_PERFMON_UNHALTED_CORE_CYCLES_SEL +#define ARCH_PERFMON_NMI_EVENT_UMASK ARCH_PERFMON_UNHALTED_CORE_CYCLES_UMASK + #ifdef CONFIG_SMP /* The performance counters used by NMI_LOCAL_APIC don't trigger when * the CPU is idle. To make sure the NMI watchdog really ticks on all @@ -212,6 +211,8 @@ static int __init setup_nmi_watchdog(char *str) __setup("nmi_watchdog=", setup_nmi_watchdog); +static void disable_intel_arch_watchdog(void); + static void disable_lapic_nmi_watchdog(void) { if (nmi_active <= 0) @@ -221,6 +222,10 @@ static void disable_lapic_nmi_watchdog(void) wrmsr(MSR_K7_EVNTSEL0, 0, 0); break; case X86_VENDOR_INTEL: + if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) { + disable_intel_arch_watchdog(); + break; + } switch (boot_cpu_data.x86) { case 6: if (boot_cpu_data.x86_model > 0xd) @@ -449,6 +454,53 @@ static int setup_p4_watchdog(void) return 1; } +static void disable_intel_arch_watchdog(void) +{ + unsigned ebx; + + /* + * Check whether the Architectural PerfMon supports + * Unhalted Core Cycles Event or not. + * NOTE: Corresponding bit = 0 in ebp indicates event present. + */ + ebx = cpuid_ebx(10); + if (!(ebx & ARCH_PERFMON_UNHALTED_CORE_CYCLES_PRESENT)) + wrmsr(MSR_ARCH_PERFMON_EVENTSEL0, 0, 0); +} + +static int setup_intel_arch_watchdog(void) +{ + unsigned int evntsel; + unsigned ebx; + + /* + * Check whether the Architectural PerfMon supports + * Unhalted Core Cycles Event or not. + * NOTE: Corresponding bit = 0 in ebp indicates event present. + */ + ebx = cpuid_ebx(10); + if ((ebx & ARCH_PERFMON_UNHALTED_CORE_CYCLES_PRESENT)) + return 0; + + nmi_perfctr_msr = MSR_ARCH_PERFMON_PERFCTR0; + + clear_msr_range(MSR_ARCH_PERFMON_EVENTSEL0, 2); + clear_msr_range(MSR_ARCH_PERFMON_PERFCTR0, 2); + + evntsel = ARCH_PERFMON_EVENTSEL_INT + | ARCH_PERFMON_EVENTSEL_OS + | ARCH_PERFMON_EVENTSEL_USR + | ARCH_PERFMON_NMI_EVENT_SEL + | ARCH_PERFMON_NMI_EVENT_UMASK; + + wrmsr(MSR_ARCH_PERFMON_EVENTSEL0, evntsel, 0); + write_watchdog_counter("INTEL_ARCH_PERFCTR0"); + apic_write(APIC_LVTPC, APIC_DM_NMI); + evntsel |= ARCH_PERFMON_EVENTSEL0_ENABLE; + wrmsr(MSR_ARCH_PERFMON_EVENTSEL0, evntsel, 0); + return 1; +} + void setup_apic_nmi_watchdog (void) { switch (boot_cpu_data.x86_vendor) { @@ -458,6 +510,11 @@ void setup_apic_nmi_watchdog (void) setup_k7_watchdog(); break; case X86_VENDOR_INTEL: + if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) { + if (!setup_intel_arch_watchdog()) + return; + break; + } switch (boot_cpu_data.x86) { case 6: if (boot_cpu_data.x86_model > 0xd) @@ -561,7 +618,8 @@ void nmi_watchdog_tick (struct pt_regs * regs) wrmsr(MSR_P4_IQ_CCCR0, nmi_p4_cccr_val, 0); apic_write(APIC_LVTPC, APIC_DM_NMI); } - else if (nmi_perfctr_msr == MSR_P6_PERFCTR0) { + else if (nmi_perfctr_msr == MSR_P6_PERFCTR0 || + nmi_perfctr_msr == MSR_ARCH_PERFMON_PERFCTR0) { /* Only P6 based Pentium M need to re-unmask * the apic vector but it doesn't hurt * other P6 variant */ diff --git a/arch/i386/kernel/numaq.c b/arch/i386/kernel/numaq.c index 5f5b075f860..0caf14652ba 100644 --- a/arch/i386/kernel/numaq.c +++ b/arch/i386/kernel/numaq.c @@ -79,10 +79,12 @@ int __init get_memcfg_numaq(void) return 1; } -static int __init numaq_dsc_disable(void) +static int __init numaq_tsc_disable(void) { - printk(KERN_DEBUG "NUMAQ: disabling TSC\n"); - tsc_disable = 1; + if (num_online_nodes() > 1) { + printk(KERN_DEBUG "NUMAQ: disabling TSC\n"); + tsc_disable = 1; + } return 0; } -core_initcall(numaq_dsc_disable); +arch_initcall(numaq_tsc_disable); diff --git a/arch/i386/kernel/process.c b/arch/i386/kernel/process.c index 6259afea46d..6946b06e278 100644 --- a/arch/i386/kernel/process.c +++ b/arch/i386/kernel/process.c @@ -102,7 +102,7 @@ void default_idle(void) local_irq_enable(); if (!hlt_counter && boot_cpu_data.hlt_works_ok) { - clear_thread_flag(TIF_POLLING_NRFLAG); + current_thread_info()->status &= ~TS_POLLING; smp_mb__after_clear_bit(); while (!need_resched()) { local_irq_disable(); @@ -111,7 +111,7 @@ void default_idle(void) else local_irq_enable(); } - set_thread_flag(TIF_POLLING_NRFLAG); + current_thread_info()->status |= TS_POLLING; } else { while (!need_resched()) cpu_relax(); @@ -174,7 +174,7 @@ void cpu_idle(void) { int cpu = smp_processor_id(); - set_thread_flag(TIF_POLLING_NRFLAG); + current_thread_info()->status |= TS_POLLING; /* endless idle loop with no priority at all */ while (1) { @@ -312,7 +312,7 @@ void show_regs(struct pt_regs * regs) cr3 = read_cr3(); cr4 = read_cr4_safe(); printk("CR0: %08lx CR2: %08lx CR3: %08lx CR4: %08lx\n", cr0, cr2, cr3, cr4); - show_trace(NULL, ®s->esp); + show_trace(NULL, regs, ®s->esp); } /* diff --git a/arch/i386/kernel/scx200.c b/arch/i386/kernel/scx200.c index 321f5fd26e7..9bf590cefc7 100644 --- a/arch/i386/kernel/scx200.c +++ b/arch/i386/kernel/scx200.c @@ -9,6 +9,7 @@ #include <linux/errno.h> #include <linux/kernel.h> #include <linux/init.h> +#include <linux/mutex.h> #include <linux/pci.h> #include <linux/scx200.h> @@ -45,11 +46,19 @@ static struct pci_driver scx200_pci_driver = { .probe = scx200_probe, }; -static DEFINE_SPINLOCK(scx200_gpio_config_lock); +static DEFINE_MUTEX(scx200_gpio_config_lock); -static int __devinit scx200_probe(struct pci_dev *pdev, const struct pci_device_id *ent) +static void __devinit scx200_init_shadow(void) { int bank; + + /* read the current values driven on the GPIO signals */ + for (bank = 0; bank < 2; ++bank) + scx200_gpio_shadow[bank] = inl(scx200_gpio_base + 0x10 * bank); +} + +static int __devinit scx200_probe(struct pci_dev *pdev, const struct pci_device_id *ent) +{ unsigned base; if (pdev->device == PCI_DEVICE_ID_NS_SCx200_BRIDGE || @@ -63,10 +72,7 @@ static int __devinit scx200_probe(struct pci_dev *pdev, const struct pci_device_ } scx200_gpio_base = base; - - /* read the current values driven on the GPIO signals */ - for (bank = 0; bank < 2; ++bank) - scx200_gpio_shadow[bank] = inl(scx200_gpio_base + 0x10 * bank); + scx200_init_shadow(); } else { /* find the base of the Configuration Block */ @@ -87,12 +93,11 @@ static int __devinit scx200_probe(struct pci_dev *pdev, const struct pci_device_ return 0; } -u32 scx200_gpio_configure(int index, u32 mask, u32 bits) +u32 scx200_gpio_configure(unsigned index, u32 mask, u32 bits) { u32 config, new_config; - unsigned long flags; - spin_lock_irqsave(&scx200_gpio_config_lock, flags); + mutex_lock(&scx200_gpio_config_lock); outl(index, scx200_gpio_base + 0x20); config = inl(scx200_gpio_base + 0x24); @@ -100,45 +105,11 @@ u32 scx200_gpio_configure(int index, u32 mask, u32 bits) new_config = (config & mask) | bits; outl(new_config, scx200_gpio_base + 0x24); - spin_unlock_irqrestore(&scx200_gpio_config_lock, flags); + mutex_unlock(&scx200_gpio_config_lock); return config; } -#if 0 -void scx200_gpio_dump(unsigned index) -{ - u32 config = scx200_gpio_configure(index, ~0, 0); - printk(KERN_DEBUG "GPIO%02u: 0x%08lx", index, (unsigned long)config); - - if (config & 1) - printk(" OE"); /* output enabled */ - else - printk(" TS"); /* tristate */ - if (config & 2) - printk(" PP"); /* push pull */ - else - printk(" OD"); /* open drain */ - if (config & 4) - printk(" PUE"); /* pull up enabled */ - else - printk(" PUD"); /* pull up disabled */ - if (config & 8) - printk(" LOCKED"); /* locked */ - if (config & 16) - printk(" LEVEL"); /* level input */ - else - printk(" EDGE"); /* edge input */ - if (config & 32) - printk(" HI"); /* trigger on rising edge */ - else - printk(" LO"); /* trigger on falling edge */ - if (config & 64) - printk(" DEBOUNCE"); /* debounce */ - printk("\n"); -} -#endif /* 0 */ - static int __init scx200_init(void) { printk(KERN_INFO NAME ": NatSemi SCx200 Driver\n"); @@ -159,10 +130,3 @@ EXPORT_SYMBOL(scx200_gpio_base); EXPORT_SYMBOL(scx200_gpio_shadow); EXPORT_SYMBOL(scx200_gpio_configure); EXPORT_SYMBOL(scx200_cb_base); - -/* - Local variables: - compile-command: "make -k -C ../../.. SUBDIRS=arch/i386/kernel modules" - c-basic-offset: 8 - End: -*/ diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c index 6bef9273733..4a65040cc62 100644 --- a/arch/i386/kernel/setup.c +++ b/arch/i386/kernel/setup.c @@ -1575,6 +1575,7 @@ void __init setup_arch(char **cmdline_p) conswitchp = &dummy_con; #endif #endif + tsc_init(); } static __init int add_pcspkr(void) diff --git a/arch/i386/kernel/signal.c b/arch/i386/kernel/signal.c index 5c352c3a9e7..43002cfb40c 100644 --- a/arch/i386/kernel/signal.c +++ b/arch/i386/kernel/signal.c @@ -351,7 +351,7 @@ static int setup_frame(int sig, struct k_sigaction *ka, goto give_sigsegv; } - restorer = &__kernel_sigreturn; + restorer = (void *)VDSO_SYM(&__kernel_sigreturn); if (ka->sa.sa_flags & SA_RESTORER) restorer = ka->sa.sa_restorer; @@ -447,7 +447,7 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, goto give_sigsegv; /* Set up to return from userspace. */ - restorer = &__kernel_rt_sigreturn; + restorer = (void *)VDSO_SYM(&__kernel_rt_sigreturn); if (ka->sa.sa_flags & SA_RESTORER) restorer = ka->sa.sa_restorer; err |= __put_user(restorer, &frame->pretcode); diff --git a/arch/i386/kernel/smp.c b/arch/i386/kernel/smp.c index d134e9643a5..c10789d7a9d 100644 --- a/arch/i386/kernel/smp.c +++ b/arch/i386/kernel/smp.c @@ -114,7 +114,17 @@ DEFINE_PER_CPU(struct tlb_state, cpu_tlbstate) ____cacheline_aligned = { &init_m static inline int __prepare_ICR (unsigned int shortcut, int vector) { - return APIC_DM_FIXED | shortcut | vector | APIC_DEST_LOGICAL; + unsigned int icr = shortcut | APIC_DEST_LOGICAL; + + switch (vector) { + default: + icr |= APIC_DM_FIXED | vector; + break; + case NMI_VECTOR: + icr |= APIC_DM_NMI; + break; + } + return icr; } static inline int __prepare_ICR2 (unsigned int mask) diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c index bd0ca5c9f05..89e7315e539 100644 --- a/arch/i386/kernel/smpboot.c +++ b/arch/i386/kernel/smpboot.c @@ -52,6 +52,7 @@ #include <asm/tlbflush.h> #include <asm/desc.h> #include <asm/arch_hooks.h> +#include <asm/nmi.h> #include <mach_apic.h> #include <mach_wakecpu.h> @@ -66,12 +67,6 @@ int smp_num_siblings = 1; EXPORT_SYMBOL(smp_num_siblings); #endif -/* Package ID of each logical CPU */ -int phys_proc_id[NR_CPUS] __read_mostly = {[0 ... NR_CPUS-1] = BAD_APICID}; - -/* Core ID of each logical CPU */ -int cpu_core_id[NR_CPUS] __read_mostly = {[0 ... NR_CPUS-1] = BAD_APICID}; - /* Last level cache ID of each logical CPU */ int cpu_llc_id[NR_CPUS] __cpuinitdata = {[0 ... NR_CPUS-1] = BAD_APICID}; @@ -453,10 +448,12 @@ cpumask_t cpu_coregroup_map(int cpu) struct cpuinfo_x86 *c = cpu_data + cpu; /* * For perf, we return last level cache shared map. - * TBD: when power saving sched policy is added, we will return - * cpu_core_map when power saving policy is enabled + * And for power savings, we return cpu_core_map */ - return c->llc_shared_map; + if (sched_mc_power_savings || sched_smt_power_savings) + return cpu_core_map[cpu]; + else + return c->llc_shared_map; } /* representing cpus for which sibling maps can be computed */ @@ -472,8 +469,8 @@ set_cpu_sibling_map(int cpu) if (smp_num_siblings > 1) { for_each_cpu_mask(i, cpu_sibling_setup_map) { - if (phys_proc_id[cpu] == phys_proc_id[i] && - cpu_core_id[cpu] == cpu_core_id[i]) { + if (c[cpu].phys_proc_id == c[i].phys_proc_id && + c[cpu].cpu_core_id == c[i].cpu_core_id) { cpu_set(i, cpu_sibling_map[cpu]); cpu_set(cpu, cpu_sibling_map[i]); cpu_set(i, cpu_core_map[cpu]); @@ -500,7 +497,7 @@ set_cpu_sibling_map(int cpu) cpu_set(i, c[cpu].llc_shared_map); cpu_set(cpu, c[i].llc_shared_map); } - if (phys_proc_id[cpu] == phys_proc_id[i]) { + if (c[cpu].phys_proc_id == c[i].phys_proc_id) { cpu_set(i, cpu_core_map[cpu]); cpu_set(cpu, cpu_core_map[i]); /* @@ -1055,6 +1052,7 @@ static int __cpuinit __smp_prepare_cpu(int cpu) struct warm_boot_cpu_info info; struct work_struct task; int apicid, ret; + struct Xgt_desc_struct *cpu_gdt_descr = &per_cpu(cpu_gdt_descr, cpu); apicid = x86_cpu_to_apicid[cpu]; if (apicid == BAD_APICID) { @@ -1062,6 +1060,18 @@ static int __cpuinit __smp_prepare_cpu(int cpu) goto exit; } + /* + * the CPU isn't initialized at boot time, allocate gdt table here. + * cpu_init will initialize it + */ + if (!cpu_gdt_descr->address) { + cpu_gdt_descr->address = get_zeroed_page(GFP_KERNEL); + if (!cpu_gdt_descr->address) + printk(KERN_CRIT "CPU%d failed to allocate GDT\n", cpu); + ret = -ENOMEM; + goto exit; + } + info.complete = &done; info.apicid = apicid; info.cpu = cpu; @@ -1339,8 +1349,8 @@ remove_siblinginfo(int cpu) cpu_clear(cpu, cpu_sibling_map[sibling]); cpus_clear(cpu_sibling_map[cpu]); cpus_clear(cpu_core_map[cpu]); - phys_proc_id[cpu] = BAD_APICID; - cpu_core_id[cpu] = BAD_APICID; + c[cpu].phys_proc_id = 0; + c[cpu].cpu_core_id = 0; cpu_clear(cpu, cpu_sibling_setup_map); } diff --git a/arch/i386/kernel/sysenter.c b/arch/i386/kernel/sysenter.c index 0bada1870bd..c60419dee01 100644 --- a/arch/i386/kernel/sysenter.c +++ b/arch/i386/kernel/sysenter.c @@ -2,6 +2,8 @@ * linux/arch/i386/kernel/sysenter.c * * (C) Copyright 2002 Linus Torvalds + * Portions based on the vdso-randomization code from exec-shield: + * Copyright(C) 2005-2006, Red Hat, Inc., Ingo Molnar * * This file contains the needed initializations to support sysenter. */ @@ -13,12 +15,31 @@ #include <linux/gfp.h> #include <linux/string.h> #include <linux/elf.h> +#include <linux/mm.h> +#include <linux/module.h> #include <asm/cpufeature.h> #include <asm/msr.h> #include <asm/pgtable.h> #include <asm/unistd.h> +/* + * Should the kernel map a VDSO page into processes and pass its + * address down to glibc upon exec()? + */ +unsigned int __read_mostly vdso_enabled = 1; + +EXPORT_SYMBOL_GPL(vdso_enabled); + +static int __init vdso_setup(char *s) +{ + vdso_enabled = simple_strtoul(s, NULL, 0); + + return 1; +} + +__setup("vdso=", vdso_setup); + extern asmlinkage void sysenter_entry(void); void enable_sep_cpu(void) @@ -45,23 +66,122 @@ void enable_sep_cpu(void) */ extern const char vsyscall_int80_start, vsyscall_int80_end; extern const char vsyscall_sysenter_start, vsyscall_sysenter_end; +static void *syscall_page; int __init sysenter_setup(void) { - void *page = (void *)get_zeroed_page(GFP_ATOMIC); + syscall_page = (void *)get_zeroed_page(GFP_ATOMIC); - __set_fixmap(FIX_VSYSCALL, __pa(page), PAGE_READONLY_EXEC); +#ifdef CONFIG_COMPAT_VDSO + __set_fixmap(FIX_VDSO, __pa(syscall_page), PAGE_READONLY); + printk("Compat vDSO mapped to %08lx.\n", __fix_to_virt(FIX_VDSO)); +#else + /* + * In the non-compat case the ELF coredumping code needs the fixmap: + */ + __set_fixmap(FIX_VDSO, __pa(syscall_page), PAGE_KERNEL_RO); +#endif if (!boot_cpu_has(X86_FEATURE_SEP)) { - memcpy(page, + memcpy(syscall_page, &vsyscall_int80_start, &vsyscall_int80_end - &vsyscall_int80_start); return 0; } - memcpy(page, + memcpy(syscall_page, &vsyscall_sysenter_start, &vsyscall_sysenter_end - &vsyscall_sysenter_start); return 0; } + +static struct page *syscall_nopage(struct vm_area_struct *vma, + unsigned long adr, int *type) +{ + struct page *p = virt_to_page(adr - vma->vm_start + syscall_page); + get_page(p); + return p; +} + +/* Prevent VMA merging */ +static void syscall_vma_close(struct vm_area_struct *vma) +{ +} + +static struct vm_operations_struct syscall_vm_ops = { + .close = syscall_vma_close, + .nopage = syscall_nopage, +}; + +/* Defined in vsyscall-sysenter.S */ +extern void SYSENTER_RETURN; + +/* Setup a VMA at program startup for the vsyscall page */ +int arch_setup_additional_pages(struct linux_binprm *bprm, int exstack) +{ + struct vm_area_struct *vma; + struct mm_struct *mm = current->mm; + unsigned long addr; + int ret; + + down_write(&mm->mmap_sem); + addr = get_unmapped_area(NULL, 0, PAGE_SIZE, 0, 0); + if (IS_ERR_VALUE(addr)) { + ret = addr; + goto up_fail; + } + + vma = kmem_cache_zalloc(vm_area_cachep, SLAB_KERNEL); + if (!vma) { + ret = -ENOMEM; + goto up_fail; + } + + vma->vm_start = addr; + vma->vm_end = addr + PAGE_SIZE; + /* MAYWRITE to allow gdb to COW and set breakpoints */ + vma->vm_flags = VM_READ|VM_EXEC|VM_MAYREAD|VM_MAYEXEC|VM_MAYWRITE; + vma->vm_flags |= mm->def_flags; + vma->vm_page_prot = protection_map[vma->vm_flags & 7]; + vma->vm_ops = &syscall_vm_ops; + vma->vm_mm = mm; + + ret = insert_vm_struct(mm, vma); + if (ret) + goto free_vma; + + current->mm->context.vdso = (void *)addr; + current_thread_info()->sysenter_return = + (void *)VDSO_SYM(&SYSENTER_RETURN); + mm->total_vm++; +up_fail: + up_write(&mm->mmap_sem); + return ret; + +free_vma: + kmem_cache_free(vm_area_cachep, vma); + return ret; +} + +const char *arch_vma_name(struct vm_area_struct *vma) +{ + if (vma->vm_mm && vma->vm_start == (long)vma->vm_mm->context.vdso) + return "[vdso]"; + return NULL; +} + +struct vm_area_struct *get_gate_vma(struct task_struct *tsk) +{ + return NULL; +} + +int in_gate_area(struct task_struct *task, unsigned long addr) +{ + return 0; +} + +int in_gate_area_no_task(unsigned long addr) +{ + return 0; +} diff --git a/arch/i386/kernel/time.c b/arch/i386/kernel/time.c index 9d307475985..5f43d041012 100644 --- a/arch/i386/kernel/time.c +++ b/arch/i386/kernel/time.c @@ -82,13 +82,6 @@ extern unsigned long wall_jiffies; DEFINE_SPINLOCK(rtc_lock); EXPORT_SYMBOL(rtc_lock); -#include <asm/i8253.h> - -DEFINE_SPINLOCK(i8253_lock); -EXPORT_SYMBOL(i8253_lock); - -struct timer_opts *cur_timer __read_mostly = &timer_none; - /* * This is a special lock that is owned by the CPU and holds the index * register we are working with. It is required for NMI access to the @@ -118,99 +111,19 @@ void rtc_cmos_write(unsigned char val, unsigned char addr) } EXPORT_SYMBOL(rtc_cmos_write); -/* - * This version of gettimeofday has microsecond resolution - * and better than microsecond precision on fast x86 machines with TSC. - */ -void do_gettimeofday(struct timeval *tv) -{ - unsigned long seq; - unsigned long usec, sec; - unsigned long max_ntp_tick; - - do { - unsigned long lost; - - seq = read_seqbegin(&xtime_lock); - - usec = cur_timer->get_offset(); - lost = jiffies - wall_jiffies; - - /* - * If time_adjust is negative then NTP is slowing the clock - * so make sure not to go into next possible interval. - * Better to lose some accuracy than have time go backwards.. - */ - if (unlikely(time_adjust < 0)) { - max_ntp_tick = (USEC_PER_SEC / HZ) - tickadj; - usec = min(usec, max_ntp_tick); - - if (lost) - usec += lost * max_ntp_tick; - } - else if (unlikely(lost)) - usec += lost * (USEC_PER_SEC / HZ); - - sec = xtime.tv_sec; - usec += (xtime.tv_nsec / 1000); - } while (read_seqretry(&xtime_lock, seq)); - - while (usec >= 1000000) { - usec -= 1000000; - sec++; - } - - tv->tv_sec = sec; - tv->tv_usec = usec; -} - -EXPORT_SYMBOL(do_gettimeofday); - -int do_settimeofday(struct timespec *tv) -{ - time_t wtm_sec, sec = tv->tv_sec; - long wtm_nsec, nsec = tv->tv_nsec; - - if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC) - return -EINVAL; - - write_seqlock_irq(&xtime_lock); - /* - * This is revolting. We need to set "xtime" correctly. However, the - * value in this location is the value at the most recent update of - * wall time. Discover what correction gettimeofday() would have - * made, and then undo it! - */ - nsec -= cur_timer->get_offset() * NSEC_PER_USEC; - nsec -= (jiffies - wall_jiffies) * TICK_NSEC; - - wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec); - wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec); - - set_normalized_timespec(&xtime, sec, nsec); - set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - - ntp_clear(); - write_sequnlock_irq(&xtime_lock); - clock_was_set(); - return 0; -} - -EXPORT_SYMBOL(do_settimeofday); - static int set_rtc_mmss(unsigned long nowtime) { int retval; - - WARN_ON(irqs_disabled()); + unsigned long flags; /* gets recalled with irq locally disabled */ - spin_lock_irq(&rtc_lock); + /* XXX - does irqsave resolve this? -johnstul */ + spin_lock_irqsave(&rtc_lock, flags); if (efi_enabled) retval = efi_set_rtc_mmss(nowtime); else retval = mach_set_rtc_mmss(nowtime); - spin_unlock_irq(&rtc_lock); + spin_unlock_irqrestore(&rtc_lock, flags); return retval; } @@ -218,16 +131,6 @@ static int set_rtc_mmss(unsigned long nowtime) int timer_ack; -/* monotonic_clock(): returns # of nanoseconds passed since time_init() - * Note: This function is required to return accurate - * time even in the absence of multiple timer ticks. - */ -unsigned long long monotonic_clock(void) -{ - return cur_timer->monotonic_clock(); -} -EXPORT_SYMBOL(monotonic_clock); - #if defined(CONFIG_SMP) && defined(CONFIG_FRAME_POINTER) unsigned long profile_pc(struct pt_regs *regs) { @@ -242,11 +145,21 @@ EXPORT_SYMBOL(profile_pc); #endif /* - * timer_interrupt() needs to keep up the real-time clock, - * as well as call the "do_timer()" routine every clocktick + * This is the same as the above, except we _also_ save the current + * Time Stamp Counter value at the time of the timer interrupt, so that + * we later on can estimate the time of day more exactly. */ -static inline void do_timer_interrupt(int irq, struct pt_regs *regs) +irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) { + /* + * Here we are in the timer irq handler. We just have irqs locally + * disabled but we don't know if the timer_bh is running on the other + * CPU. We need to avoid to SMP race with it. NOTE: we don' t need + * the irq version of write_lock because as just said we have irq + * locally disabled. -arca + */ + write_seqlock(&xtime_lock); + #ifdef CONFIG_X86_IO_APIC if (timer_ack) { /* @@ -279,27 +192,6 @@ static inline void do_timer_interrupt(int irq, struct pt_regs *regs) irq = inb_p( 0x61 ); /* read the current state */ outb_p( irq|0x80, 0x61 ); /* reset the IRQ */ } -} - -/* - * This is the same as the above, except we _also_ save the current - * Time Stamp Counter value at the time of the timer interrupt, so that - * we later on can estimate the time of day more exactly. - */ -irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) -{ - /* - * Here we are in the timer irq handler. We just have irqs locally - * disabled but we don't know if the timer_bh is running on the other - * CPU. We need to avoid to SMP race with it. NOTE: we don' t need - * the irq version of write_lock because as just said we have irq - * locally disabled. -arca - */ - write_seqlock(&xtime_lock); - - cur_timer->mark_offset(); - - do_timer_interrupt(irq, regs); write_sequnlock(&xtime_lock); @@ -380,7 +272,6 @@ void notify_arch_cmos_timer(void) static long clock_cmos_diff, sleep_start; -static struct timer_opts *last_timer; static int timer_suspend(struct sys_device *dev, pm_message_t state) { /* @@ -389,10 +280,6 @@ static int timer_suspend(struct sys_device *dev, pm_message_t state) clock_cmos_diff = -get_cmos_time(); clock_cmos_diff += get_seconds(); sleep_start = get_cmos_time(); - last_timer = cur_timer; - cur_timer = &timer_none; - if (last_timer->suspend) - last_timer->suspend(state); return 0; } @@ -415,10 +302,6 @@ static int timer_resume(struct sys_device *dev) jiffies_64 += sleep_length; wall_jiffies += sleep_length; write_sequnlock_irqrestore(&xtime_lock, flags); - if (last_timer->resume) - last_timer->resume(); - cur_timer = last_timer; - last_timer = NULL; touch_softlockup_watchdog(); return 0; } @@ -460,9 +343,6 @@ static void __init hpet_time_init(void) printk("Using HPET for base-timer\n"); } - cur_timer = select_timer(); - printk(KERN_INFO "Using %s for high-res timesource\n",cur_timer->name); - time_init_hook(); } #endif @@ -484,8 +364,5 @@ void __init time_init(void) set_normalized_timespec(&wall_to_monotonic, -xtime.tv_sec, -xtime.tv_nsec); - cur_timer = select_timer(); - printk(KERN_INFO "Using %s for high-res timesource\n",cur_timer->name); - time_init_hook(); } diff --git a/arch/i386/kernel/timers/Makefile b/arch/i386/kernel/timers/Makefile deleted file mode 100644 index 8fa12be658d..00000000000 --- a/arch/i386/kernel/timers/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# Makefile for x86 timers -# - -obj-y := timer.o timer_none.o timer_tsc.o timer_pit.o common.o - -obj-$(CONFIG_X86_CYCLONE_TIMER) += timer_cyclone.o -obj-$(CONFIG_HPET_TIMER) += timer_hpet.o -obj-$(CONFIG_X86_PM_TIMER) += timer_pm.o diff --git a/arch/i386/kernel/timers/common.c b/arch/i386/kernel/timers/common.c deleted file mode 100644 index 8163fe0cf1f..00000000000 --- a/arch/i386/kernel/timers/common.c +++ /dev/null @@ -1,172 +0,0 @@ -/* - * Common functions used across the timers go here - */ - -#include <linux/init.h> -#include <linux/timex.h> -#include <linux/errno.h> -#include <linux/jiffies.h> -#include <linux/module.h> - -#include <asm/io.h> -#include <asm/timer.h> -#include <asm/hpet.h> - -#include "mach_timer.h" - -/* ------ Calibrate the TSC ------- - * Return 2^32 * (1 / (TSC clocks per usec)) for do_fast_gettimeoffset(). - * Too much 64-bit arithmetic here to do this cleanly in C, and for - * accuracy's sake we want to keep the overhead on the CTC speaker (channel 2) - * output busy loop as low as possible. We avoid reading the CTC registers - * directly because of the awkward 8-bit access mechanism of the 82C54 - * device. - */ - -#define CALIBRATE_TIME (5 * 1000020/HZ) - -unsigned long calibrate_tsc(void) -{ - mach_prepare_counter(); - - { - unsigned long startlow, starthigh; - unsigned long endlow, endhigh; - unsigned long count; - - rdtsc(startlow,starthigh); - mach_countup(&count); - rdtsc(endlow,endhigh); - - - /* Error: ECTCNEVERSET */ - if (count <= 1) - goto bad_ctc; - - /* 64-bit subtract - gcc just messes up with long longs */ - __asm__("subl %2,%0\n\t" - "sbbl %3,%1" - :"=a" (endlow), "=d" (endhigh) - :"g" (startlow), "g" (starthigh), - "0" (endlow), "1" (endhigh)); - - /* Error: ECPUTOOFAST */ - if (endhigh) - goto bad_ctc; - - /* Error: ECPUTOOSLOW */ - if (endlow <= CALIBRATE_TIME) - goto bad_ctc; - - __asm__("divl %2" - :"=a" (endlow), "=d" (endhigh) - :"r" (endlow), "0" (0), "1" (CALIBRATE_TIME)); - - return endlow; - } - - /* - * The CTC wasn't reliable: we got a hit on the very first read, - * or the CPU was so fast/slow that the quotient wouldn't fit in - * 32 bits.. - */ -bad_ctc: - return 0; -} - -#ifdef CONFIG_HPET_TIMER -/* ------ Calibrate the TSC using HPET ------- - * Return 2^32 * (1 / (TSC clocks per usec)) for getting the CPU freq. - * Second output is parameter 1 (when non NULL) - * Set 2^32 * (1 / (tsc per HPET clk)) for delay_hpet(). - * calibrate_tsc() calibrates the processor TSC by comparing - * it to the HPET timer of known frequency. - * Too much 64-bit arithmetic here to do this cleanly in C - */ -#define CALIBRATE_CNT_HPET (5 * hpet_tick) -#define CALIBRATE_TIME_HPET (5 * KERNEL_TICK_USEC) - -unsigned long __devinit calibrate_tsc_hpet(unsigned long *tsc_hpet_quotient_ptr) -{ - unsigned long tsc_startlow, tsc_starthigh; - unsigned long tsc_endlow, tsc_endhigh; - unsigned long hpet_start, hpet_end; - unsigned long result, remain; - - hpet_start = hpet_readl(HPET_COUNTER); - rdtsc(tsc_startlow, tsc_starthigh); - do { - hpet_end = hpet_readl(HPET_COUNTER); - } while ((hpet_end - hpet_start) < CALIBRATE_CNT_HPET); - rdtsc(tsc_endlow, tsc_endhigh); - - /* 64-bit subtract - gcc just messes up with long longs */ - __asm__("subl %2,%0\n\t" - "sbbl %3,%1" - :"=a" (tsc_endlow), "=d" (tsc_endhigh) - :"g" (tsc_startlow), "g" (tsc_starthigh), - "0" (tsc_endlow), "1" (tsc_endhigh)); - - /* Error: ECPUTOOFAST */ - if (tsc_endhigh) - goto bad_calibration; - - /* Error: ECPUTOOSLOW */ - if (tsc_endlow <= CALIBRATE_TIME_HPET) - goto bad_calibration; - - ASM_DIV64_REG(result, remain, tsc_endlow, 0, CALIBRATE_TIME_HPET); - if (remain > (tsc_endlow >> 1)) - result++; /* rounding the result */ - - if (tsc_hpet_quotient_ptr) { - unsigned long tsc_hpet_quotient; - - ASM_DIV64_REG(tsc_hpet_quotient, remain, tsc_endlow, 0, - CALIBRATE_CNT_HPET); - if (remain > (tsc_endlow >> 1)) - tsc_hpet_quotient++; /* rounding the result */ - *tsc_hpet_quotient_ptr = tsc_hpet_quotient; - } - - return result; -bad_calibration: - /* - * the CPU was so fast/slow that the quotient wouldn't fit in - * 32 bits.. - */ - return 0; -} -#endif - - -unsigned long read_timer_tsc(void) -{ - unsigned long retval; - rdtscl(retval); - return retval; -} - - -/* calculate cpu_khz */ -void init_cpu_khz(void) -{ - if (cpu_has_tsc) { - unsigned long tsc_quotient = calibrate_tsc(); - if (tsc_quotient) { - /* report CPU clock rate in Hz. - * The formula is (10^6 * 2^32) / (2^32 * 1 / (clocks/us)) = - * clock/second. Our precision is about 100 ppm. - */ - { unsigned long eax=0, edx=1000; - __asm__("divl %2" - :"=a" (cpu_khz), "=d" (edx) - :"r" (tsc_quotient), - "0" (eax), "1" (edx)); - printk("Detected %u.%03u MHz processor.\n", - cpu_khz / 1000, cpu_khz % 1000); - } - } - } -} - diff --git a/arch/i386/kernel/timers/timer.c b/arch/i386/kernel/timers/timer.c deleted file mode 100644 index 7e39ed8e33f..00000000000 --- a/arch/i386/kernel/timers/timer.c +++ /dev/null @@ -1,75 +0,0 @@ -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <asm/timer.h> - -#ifdef CONFIG_HPET_TIMER -/* - * HPET memory read is slower than tsc reads, but is more dependable as it - * always runs at constant frequency and reduces complexity due to - * cpufreq. So, we prefer HPET timer to tsc based one. Also, we cannot use - * timer_pit when HPET is active. So, we default to timer_tsc. - */ -#endif -/* list of timers, ordered by preference, NULL terminated */ -static struct init_timer_opts* __initdata timers[] = { -#ifdef CONFIG_X86_CYCLONE_TIMER - &timer_cyclone_init, -#endif -#ifdef CONFIG_HPET_TIMER - &timer_hpet_init, -#endif -#ifdef CONFIG_X86_PM_TIMER - &timer_pmtmr_init, -#endif - &timer_tsc_init, - &timer_pit_init, - NULL, -}; - -static char clock_override[10] __initdata; - -static int __init clock_setup(char* str) -{ - if (str) - strlcpy(clock_override, str, sizeof(clock_override)); - return 1; -} -__setup("clock=", clock_setup); - - -/* The chosen timesource has been found to be bad. - * Fall back to a known good timesource (the PIT) - */ -void clock_fallback(void) -{ - cur_timer = &timer_pit; -} - -/* iterates through the list of timers, returning the first - * one that initializes successfully. - */ -struct timer_opts* __init select_timer(void) -{ - int i = 0; - - /* find most preferred working timer */ - while (timers[i]) { - if (timers[i]->init) - if (timers[i]->init(clock_override) == 0) - return timers[i]->opts; - ++i; - } - - panic("select_timer: Cannot find a suitable timer\n"); - return NULL; -} - -int read_current_timer(unsigned long *timer_val) -{ - if (cur_timer->read_timer) { - *timer_val = cur_timer->read_timer(); - return 0; - } - return -1; -} diff --git a/arch/i386/kernel/timers/timer_cyclone.c b/arch/i386/kernel/timers/timer_cyclone.c deleted file mode 100644 index 13892a65c94..00000000000 --- a/arch/i386/kernel/timers/timer_cyclone.c +++ /dev/null @@ -1,259 +0,0 @@ -/* Cyclone-timer: - * This code implements timer_ops for the cyclone counter found - * on IBM x440, x360, and other Summit based systems. - * - * Copyright (C) 2002 IBM, John Stultz (johnstul@us.ibm.com) - */ - - -#include <linux/spinlock.h> -#include <linux/init.h> -#include <linux/timex.h> -#include <linux/errno.h> -#include <linux/string.h> -#include <linux/jiffies.h> - -#include <asm/timer.h> -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/fixmap.h> -#include <asm/i8253.h> - -#include "io_ports.h" - -/* Number of usecs that the last interrupt was delayed */ -static int delay_at_last_interrupt; - -#define CYCLONE_CBAR_ADDR 0xFEB00CD0 -#define CYCLONE_PMCC_OFFSET 0x51A0 -#define CYCLONE_MPMC_OFFSET 0x51D0 -#define CYCLONE_MPCS_OFFSET 0x51A8 -#define CYCLONE_TIMER_FREQ 100000000 -#define CYCLONE_TIMER_MASK (((u64)1<<40)-1) /* 40 bit mask */ -int use_cyclone = 0; - -static u32* volatile cyclone_timer; /* Cyclone MPMC0 register */ -static u32 last_cyclone_low; -static u32 last_cyclone_high; -static unsigned long long monotonic_base; -static seqlock_t monotonic_lock = SEQLOCK_UNLOCKED; - -/* helper macro to atomically read both cyclone counter registers */ -#define read_cyclone_counter(low,high) \ - do{ \ - high = cyclone_timer[1]; low = cyclone_timer[0]; \ - } while (high != cyclone_timer[1]); - - -static void mark_offset_cyclone(void) -{ - unsigned long lost, delay; - unsigned long delta = last_cyclone_low; - int count; - unsigned long long this_offset, last_offset; - - write_seqlock(&monotonic_lock); - last_offset = ((unsigned long long)last_cyclone_high<<32)|last_cyclone_low; - - spin_lock(&i8253_lock); - read_cyclone_counter(last_cyclone_low,last_cyclone_high); - - /* read values for delay_at_last_interrupt */ - outb_p(0x00, 0x43); /* latch the count ASAP */ - - count = inb_p(0x40); /* read the latched count */ - count |= inb(0x40) << 8; - - /* - * VIA686a test code... reset the latch if count > max + 1 - * from timer_pit.c - cjb - */ - if (count > LATCH) { - outb_p(0x34, PIT_MODE); - outb_p(LATCH & 0xff, PIT_CH0); - outb(LATCH >> 8, PIT_CH0); - count = LATCH - 1; - } - spin_unlock(&i8253_lock); - - /* lost tick compensation */ - delta = last_cyclone_low - delta; - delta /= (CYCLONE_TIMER_FREQ/1000000); - delta += delay_at_last_interrupt; - lost = delta/(1000000/HZ); - delay = delta%(1000000/HZ); - if (lost >= 2) - jiffies_64 += lost-1; - - /* update the monotonic base value */ - this_offset = ((unsigned long long)last_cyclone_high<<32)|last_cyclone_low; - monotonic_base += (this_offset - last_offset) & CYCLONE_TIMER_MASK; - write_sequnlock(&monotonic_lock); - - /* calculate delay_at_last_interrupt */ - count = ((LATCH-1) - count) * TICK_SIZE; - delay_at_last_interrupt = (count + LATCH/2) / LATCH; - - - /* catch corner case where tick rollover occured - * between cyclone and pit reads (as noted when - * usec delta is > 90% # of usecs/tick) - */ - if (lost && abs(delay - delay_at_last_interrupt) > (900000/HZ)) - jiffies_64++; -} - -static unsigned long get_offset_cyclone(void) -{ - u32 offset; - - if(!cyclone_timer) - return delay_at_last_interrupt; - - /* Read the cyclone timer */ - offset = cyclone_timer[0]; - - /* .. relative to previous jiffy */ - offset = offset - last_cyclone_low; - - /* convert cyclone ticks to microseconds */ - /* XXX slow, can we speed this up? */ - offset = offset/(CYCLONE_TIMER_FREQ/1000000); - - /* our adjusted time offset in microseconds */ - return delay_at_last_interrupt + offset; -} - -static unsigned long long monotonic_clock_cyclone(void) -{ - u32 now_low, now_high; - unsigned long long last_offset, this_offset, base; - unsigned long long ret; - unsigned seq; - - /* atomically read monotonic base & last_offset */ - do { - seq = read_seqbegin(&monotonic_lock); - last_offset = ((unsigned long long)last_cyclone_high<<32)|last_cyclone_low; - base = monotonic_base; - } while (read_seqretry(&monotonic_lock, seq)); - - - /* Read the cyclone counter */ - read_cyclone_counter(now_low,now_high); - this_offset = ((unsigned long long)now_high<<32)|now_low; - - /* convert to nanoseconds */ - ret = base + ((this_offset - last_offset)&CYCLONE_TIMER_MASK); - return ret * (1000000000 / CYCLONE_TIMER_FREQ); -} - -static int __init init_cyclone(char* override) -{ - u32* reg; - u32 base; /* saved cyclone base address */ - u32 pageaddr; /* page that contains cyclone_timer register */ - u32 offset; /* offset from pageaddr to cyclone_timer register */ - int i; - - /* check clock override */ - if (override[0] && strncmp(override,"cyclone",7)) - return -ENODEV; - - /*make sure we're on a summit box*/ - if(!use_cyclone) return -ENODEV; - - printk(KERN_INFO "Summit chipset: Starting Cyclone Counter.\n"); - - /* find base address */ - pageaddr = (CYCLONE_CBAR_ADDR)&PAGE_MASK; - offset = (CYCLONE_CBAR_ADDR)&(~PAGE_MASK); - set_fixmap_nocache(FIX_CYCLONE_TIMER, pageaddr); - reg = (u32*)(fix_to_virt(FIX_CYCLONE_TIMER) + offset); - if(!reg){ - printk(KERN_ERR "Summit chipset: Could not find valid CBAR register.\n"); - return -ENODEV; - } - base = *reg; - if(!base){ - printk(KERN_ERR "Summit chipset: Could not find valid CBAR value.\n"); - return -ENODEV; - } - - /* setup PMCC */ - pageaddr = (base + CYCLONE_PMCC_OFFSET)&PAGE_MASK; - offset = (base + CYCLONE_PMCC_OFFSET)&(~PAGE_MASK); - set_fixmap_nocache(FIX_CYCLONE_TIMER, pageaddr); - reg = (u32*)(fix_to_virt(FIX_CYCLONE_TIMER) + offset); - if(!reg){ - printk(KERN_ERR "Summit chipset: Could not find valid PMCC register.\n"); - return -ENODEV; - } - reg[0] = 0x00000001; - - /* setup MPCS */ - pageaddr = (base + CYCLONE_MPCS_OFFSET)&PAGE_MASK; - offset = (base + CYCLONE_MPCS_OFFSET)&(~PAGE_MASK); - set_fixmap_nocache(FIX_CYCLONE_TIMER, pageaddr); - reg = (u32*)(fix_to_virt(FIX_CYCLONE_TIMER) + offset); - if(!reg){ - printk(KERN_ERR "Summit chipset: Could not find valid MPCS register.\n"); - return -ENODEV; - } - reg[0] = 0x00000001; - - /* map in cyclone_timer */ - pageaddr = (base + CYCLONE_MPMC_OFFSET)&PAGE_MASK; - offset = (base + CYCLONE_MPMC_OFFSET)&(~PAGE_MASK); - set_fixmap_nocache(FIX_CYCLONE_TIMER, pageaddr); - cyclone_timer = (u32*)(fix_to_virt(FIX_CYCLONE_TIMER) + offset); - if(!cyclone_timer){ - printk(KERN_ERR "Summit chipset: Could not find valid MPMC register.\n"); - return -ENODEV; - } - - /*quick test to make sure its ticking*/ - for(i=0; i<3; i++){ - u32 old = cyclone_timer[0]; - int stall = 100; - while(stall--) barrier(); - if(cyclone_timer[0] == old){ - printk(KERN_ERR "Summit chipset: Counter not counting! DISABLED\n"); - cyclone_timer = 0; - return -ENODEV; - } - } - - init_cpu_khz(); - - /* Everything looks good! */ - return 0; -} - - -static void delay_cyclone(unsigned long loops) -{ - unsigned long bclock, now; - if(!cyclone_timer) - return; - bclock = cyclone_timer[0]; - do { - rep_nop(); - now = cyclone_timer[0]; - } while ((now-bclock) < loops); -} -/************************************************************/ - -/* cyclone timer_opts struct */ -static struct timer_opts timer_cyclone = { - .name = "cyclone", - .mark_offset = mark_offset_cyclone, - .get_offset = get_offset_cyclone, - .monotonic_clock = monotonic_clock_cyclone, - .delay = delay_cyclone, -}; - -struct init_timer_opts __initdata timer_cyclone_init = { - .init = init_cyclone, - .opts = &timer_cyclone, -}; diff --git a/arch/i386/kernel/timers/timer_hpet.c b/arch/i386/kernel/timers/timer_hpet.c deleted file mode 100644 index 17a6fe7166e..00000000000 --- a/arch/i386/kernel/timers/timer_hpet.c +++ /dev/null @@ -1,217 +0,0 @@ -/* - * This code largely moved from arch/i386/kernel/time.c. - * See comments there for proper credits. - */ - -#include <linux/spinlock.h> -#include <linux/init.h> -#include <linux/timex.h> -#include <linux/errno.h> -#include <linux/string.h> -#include <linux/jiffies.h> - -#include <asm/timer.h> -#include <asm/io.h> -#include <asm/processor.h> - -#include "io_ports.h" -#include "mach_timer.h" -#include <asm/hpet.h> - -static unsigned long hpet_usec_quotient __read_mostly; /* convert hpet clks to usec */ -static unsigned long tsc_hpet_quotient __read_mostly; /* convert tsc to hpet clks */ -static unsigned long hpet_last; /* hpet counter value at last tick*/ -static unsigned long last_tsc_low; /* lsb 32 bits of Time Stamp Counter */ -static unsigned long last_tsc_high; /* msb 32 bits of Time Stamp Counter */ -static unsigned long long monotonic_base; -static seqlock_t monotonic_lock = SEQLOCK_UNLOCKED; - -/* convert from cycles(64bits) => nanoseconds (64bits) - * basic equation: - * ns = cycles / (freq / ns_per_sec) - * ns = cycles * (ns_per_sec / freq) - * ns = cycles * (10^9 / (cpu_khz * 10^3)) - * ns = cycles * (10^6 / cpu_khz) - * - * Then we use scaling math (suggested by george@mvista.com) to get: - * ns = cycles * (10^6 * SC / cpu_khz) / SC - * ns = cycles * cyc2ns_scale / SC - * - * And since SC is a constant power of two, we can convert the div - * into a shift. - * - * We can use khz divisor instead of mhz to keep a better percision, since - * cyc2ns_scale is limited to 10^6 * 2^10, which fits in 32 bits. - * (mathieu.desnoyers@polymtl.ca) - * - * -johnstul@us.ibm.com "math is hard, lets go shopping!" - */ -static unsigned long cyc2ns_scale __read_mostly; -#define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */ - -static inline void set_cyc2ns_scale(unsigned long cpu_khz) -{ - cyc2ns_scale = (1000000 << CYC2NS_SCALE_FACTOR)/cpu_khz; -} - -static inline unsigned long long cycles_2_ns(unsigned long long cyc) -{ - return (cyc * cyc2ns_scale) >> CYC2NS_SCALE_FACTOR; -} - -static unsigned long long monotonic_clock_hpet(void) -{ - unsigned long long last_offset, this_offset, base; - unsigned seq; - - /* atomically read monotonic base & last_offset */ - do { - seq = read_seqbegin(&monotonic_lock); - last_offset = ((unsigned long long)last_tsc_high<<32)|last_tsc_low; - base = monotonic_base; - } while (read_seqretry(&monotonic_lock, seq)); - - /* Read the Time Stamp Counter */ - rdtscll(this_offset); - - /* return the value in ns */ - return base + cycles_2_ns(this_offset - last_offset); -} - -static unsigned long get_offset_hpet(void) -{ - register unsigned long eax, edx; - - eax = hpet_readl(HPET_COUNTER); - eax -= hpet_last; /* hpet delta */ - eax = min(hpet_tick, eax); - /* - * Time offset = (hpet delta) * ( usecs per HPET clock ) - * = (hpet delta) * ( usecs per tick / HPET clocks per tick) - * = (hpet delta) * ( hpet_usec_quotient ) / (2^32) - * - * Where, - * hpet_usec_quotient = (2^32 * usecs per tick)/HPET clocks per tick - * - * Using a mull instead of a divl saves some cycles in critical path. - */ - ASM_MUL64_REG(eax, edx, hpet_usec_quotient, eax); - - /* our adjusted time offset in microseconds */ - return edx; -} - -static void mark_offset_hpet(void) -{ - unsigned long long this_offset, last_offset; - unsigned long offset; - - write_seqlock(&monotonic_lock); - last_offset = ((unsigned long long)last_tsc_high<<32)|last_tsc_low; - rdtsc(last_tsc_low, last_tsc_high); - - if (hpet_use_timer) - offset = hpet_readl(HPET_T0_CMP) - hpet_tick; - else - offset = hpet_readl(HPET_COUNTER); - if (unlikely(((offset - hpet_last) >= (2*hpet_tick)) && (hpet_last != 0))) { - int lost_ticks = ((offset - hpet_last) / hpet_tick) - 1; - jiffies_64 += lost_ticks; - } - hpet_last = offset; - - /* update the monotonic base value */ - this_offset = ((unsigned long long)last_tsc_high<<32)|last_tsc_low; - monotonic_base += cycles_2_ns(this_offset - last_offset); - write_sequnlock(&monotonic_lock); -} - -static void delay_hpet(unsigned long loops) -{ - unsigned long hpet_start, hpet_end; - unsigned long eax; - - /* loops is the number of cpu cycles. Convert it to hpet clocks */ - ASM_MUL64_REG(eax, loops, tsc_hpet_quotient, loops); - - hpet_start = hpet_readl(HPET_COUNTER); - do { - rep_nop(); - hpet_end = hpet_readl(HPET_COUNTER); - } while ((hpet_end - hpet_start) < (loops)); -} - -static struct timer_opts timer_hpet; - -static int __init init_hpet(char* override) -{ - unsigned long result, remain; - - /* check clock override */ - if (override[0] && strncmp(override,"hpet",4)) - return -ENODEV; - - if (!is_hpet_enabled()) - return -ENODEV; - - printk("Using HPET for gettimeofday\n"); - if (cpu_has_tsc) { - unsigned long tsc_quotient = calibrate_tsc_hpet(&tsc_hpet_quotient); - if (tsc_quotient) { - /* report CPU clock rate in Hz. - * The formula is (10^6 * 2^32) / (2^32 * 1 / (clocks/us)) = - * clock/second. Our precision is about 100 ppm. - */ - { unsigned long eax=0, edx=1000; - ASM_DIV64_REG(cpu_khz, edx, tsc_quotient, - eax, edx); - printk("Detected %u.%03u MHz processor.\n", - cpu_khz / 1000, cpu_khz % 1000); - } - set_cyc2ns_scale(cpu_khz); - } - /* set this only when cpu_has_tsc */ - timer_hpet.read_timer = read_timer_tsc; - } - - /* - * Math to calculate hpet to usec multiplier - * Look for the comments at get_offset_hpet() - */ - ASM_DIV64_REG(result, remain, hpet_tick, 0, KERNEL_TICK_USEC); - if (remain > (hpet_tick >> 1)) - result++; /* rounding the result */ - hpet_usec_quotient = result; - - return 0; -} - -static int hpet_resume(void) -{ - write_seqlock(&monotonic_lock); - /* Assume this is the last mark offset time */ - rdtsc(last_tsc_low, last_tsc_high); - - if (hpet_use_timer) - hpet_last = hpet_readl(HPET_T0_CMP) - hpet_tick; - else - hpet_last = hpet_readl(HPET_COUNTER); - write_sequnlock(&monotonic_lock); - return 0; -} -/************************************************************/ - -/* tsc timer_opts struct */ -static struct timer_opts timer_hpet __read_mostly = { - .name = "hpet", - .mark_offset = mark_offset_hpet, - .get_offset = get_offset_hpet, - .monotonic_clock = monotonic_clock_hpet, - .delay = delay_hpet, - .resume = hpet_resume, -}; - -struct init_timer_opts __initdata timer_hpet_init = { - .init = init_hpet, - .opts = &timer_hpet, -}; diff --git a/arch/i386/kernel/timers/timer_none.c b/arch/i386/kernel/timers/timer_none.c deleted file mode 100644 index 4ea2f414dbb..00000000000 --- a/arch/i386/kernel/timers/timer_none.c +++ /dev/null @@ -1,39 +0,0 @@ -#include <linux/init.h> -#include <asm/timer.h> - -static void mark_offset_none(void) -{ - /* nothing needed */ -} - -static unsigned long get_offset_none(void) -{ - return 0; -} - -static unsigned long long monotonic_clock_none(void) -{ - return 0; -} - -static void delay_none(unsigned long loops) -{ - int d0; - __asm__ __volatile__( - "\tjmp 1f\n" - ".align 16\n" - "1:\tjmp 2f\n" - ".align 16\n" - "2:\tdecl %0\n\tjns 2b" - :"=&a" (d0) - :"0" (loops)); -} - -/* none timer_opts struct */ -struct timer_opts timer_none = { - .name = "none", - .mark_offset = mark_offset_none, - .get_offset = get_offset_none, - .monotonic_clock = monotonic_clock_none, - .delay = delay_none, -}; diff --git a/arch/i386/kernel/timers/timer_pit.c b/arch/i386/kernel/timers/timer_pit.c deleted file mode 100644 index b9b6bd56b9b..00000000000 --- a/arch/i386/kernel/timers/timer_pit.c +++ /dev/null @@ -1,177 +0,0 @@ -/* - * This code largely moved from arch/i386/kernel/time.c. - * See comments there for proper credits. - */ - -#include <linux/spinlock.h> -#include <linux/module.h> -#include <linux/device.h> -#include <linux/sysdev.h> -#include <linux/timex.h> -#include <asm/delay.h> -#include <asm/mpspec.h> -#include <asm/timer.h> -#include <asm/smp.h> -#include <asm/io.h> -#include <asm/arch_hooks.h> -#include <asm/i8253.h> - -#include "do_timer.h" -#include "io_ports.h" - -static int count_p; /* counter in get_offset_pit() */ - -static int __init init_pit(char* override) -{ - /* check clock override */ - if (override[0] && strncmp(override,"pit",3)) - printk(KERN_ERR "Warning: clock= override failed. Defaulting " - "to PIT\n"); - init_cpu_khz(); - count_p = LATCH; - return 0; -} - -static void mark_offset_pit(void) -{ - /* nothing needed */ -} - -static unsigned long long monotonic_clock_pit(void) -{ - return 0; -} - -static void delay_pit(unsigned long loops) -{ - int d0; - __asm__ __volatile__( - "\tjmp 1f\n" - ".align 16\n" - "1:\tjmp 2f\n" - ".align 16\n" - "2:\tdecl %0\n\tjns 2b" - :"=&a" (d0) - :"0" (loops)); -} - - -/* This function must be called with xtime_lock held. - * It was inspired by Steve McCanne's microtime-i386 for BSD. -- jrs - * - * However, the pc-audio speaker driver changes the divisor so that - * it gets interrupted rather more often - it loads 64 into the - * counter rather than 11932! This has an adverse impact on - * do_gettimeoffset() -- it stops working! What is also not - * good is that the interval that our timer function gets called - * is no longer 10.0002 ms, but 9.9767 ms. To get around this - * would require using a different timing source. Maybe someone - * could use the RTC - I know that this can interrupt at frequencies - * ranging from 8192Hz to 2Hz. If I had the energy, I'd somehow fix - * it so that at startup, the timer code in sched.c would select - * using either the RTC or the 8253 timer. The decision would be - * based on whether there was any other device around that needed - * to trample on the 8253. I'd set up the RTC to interrupt at 1024 Hz, - * and then do some jiggery to have a version of do_timer that - * advanced the clock by 1/1024 s. Every time that reached over 1/100 - * of a second, then do all the old code. If the time was kept correct - * then do_gettimeoffset could just return 0 - there is no low order - * divider that can be accessed. - * - * Ideally, you would be able to use the RTC for the speaker driver, - * but it appears that the speaker driver really needs interrupt more - * often than every 120 us or so. - * - * Anyway, this needs more thought.... pjsg (1993-08-28) - * - * If you are really that interested, you should be reading - * comp.protocols.time.ntp! - */ - -static unsigned long get_offset_pit(void) -{ - int count; - unsigned long flags; - static unsigned long jiffies_p = 0; - - /* - * cache volatile jiffies temporarily; we have xtime_lock. - */ - unsigned long jiffies_t; - - spin_lock_irqsave(&i8253_lock, flags); - /* timer count may underflow right here */ - outb_p(0x00, PIT_MODE); /* latch the count ASAP */ - - count = inb_p(PIT_CH0); /* read the latched count */ - - /* - * We do this guaranteed double memory access instead of a _p - * postfix in the previous port access. Wheee, hackady hack - */ - jiffies_t = jiffies; - - count |= inb_p(PIT_CH0) << 8; - - /* VIA686a test code... reset the latch if count > max + 1 */ - if (count > LATCH) { - outb_p(0x34, PIT_MODE); - outb_p(LATCH & 0xff, PIT_CH0); - outb(LATCH >> 8, PIT_CH0); - count = LATCH - 1; - } - - /* - * avoiding timer inconsistencies (they are rare, but they happen)... - * there are two kinds of problems that must be avoided here: - * 1. the timer counter underflows - * 2. hardware problem with the timer, not giving us continuous time, - * the counter does small "jumps" upwards on some Pentium systems, - * (see c't 95/10 page 335 for Neptun bug.) - */ - - if( jiffies_t == jiffies_p ) { - if( count > count_p ) { - /* the nutcase */ - count = do_timer_overflow(count); - } - } else - jiffies_p = jiffies_t; - - count_p = count; - - spin_unlock_irqrestore(&i8253_lock, flags); - - count = ((LATCH-1) - count) * TICK_SIZE; - count = (count + LATCH/2) / LATCH; - - return count; -} - - -/* tsc timer_opts struct */ -struct timer_opts timer_pit = { - .name = "pit", - .mark_offset = mark_offset_pit, - .get_offset = get_offset_pit, - .monotonic_clock = monotonic_clock_pit, - .delay = delay_pit, -}; - -struct init_timer_opts __initdata timer_pit_init = { - .init = init_pit, - .opts = &timer_pit, -}; - -void setup_pit_timer(void) -{ - unsigned long flags; - - spin_lock_irqsave(&i8253_lock, flags); - outb_p(0x34,PIT_MODE); /* binary, mode 2, LSB/MSB, ch 0 */ - udelay(10); - outb_p(LATCH & 0xff , PIT_CH0); /* LSB */ - udelay(10); - outb(LATCH >> 8 , PIT_CH0); /* MSB */ - spin_unlock_irqrestore(&i8253_lock, flags); -} diff --git a/arch/i386/kernel/timers/timer_pm.c b/arch/i386/kernel/timers/timer_pm.c deleted file mode 100644 index 144e94a0493..00000000000 --- a/arch/i386/kernel/timers/timer_pm.c +++ /dev/null @@ -1,342 +0,0 @@ -/* - * (C) Dominik Brodowski <linux@brodo.de> 2003 - * - * Driver to use the Power Management Timer (PMTMR) available in some - * southbridges as primary timing source for the Linux kernel. - * - * Based on parts of linux/drivers/acpi/hardware/hwtimer.c, timer_pit.c, - * timer_hpet.c, and on Arjan van de Ven's implementation for 2.4. - * - * This file is licensed under the GPL v2. - */ - - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/device.h> -#include <linux/init.h> -#include <linux/pci.h> -#include <asm/types.h> -#include <asm/timer.h> -#include <asm/smp.h> -#include <asm/io.h> -#include <asm/arch_hooks.h> - -#include <linux/timex.h> -#include "mach_timer.h" - -/* Number of PMTMR ticks expected during calibration run */ -#define PMTMR_TICKS_PER_SEC 3579545 -#define PMTMR_EXPECTED_RATE \ - ((CALIBRATE_LATCH * (PMTMR_TICKS_PER_SEC >> 10)) / (CLOCK_TICK_RATE>>10)) - - -/* The I/O port the PMTMR resides at. - * The location is detected during setup_arch(), - * in arch/i386/acpi/boot.c */ -u32 pmtmr_ioport = 0; - - -/* value of the Power timer at last timer interrupt */ -static u32 offset_tick; -static u32 offset_delay; - -static unsigned long long monotonic_base; -static seqlock_t monotonic_lock = SEQLOCK_UNLOCKED; - -#define ACPI_PM_MASK 0xFFFFFF /* limit it to 24 bits */ - -static int pmtmr_need_workaround __read_mostly = 1; - -/*helper function to safely read acpi pm timesource*/ -static inline u32 read_pmtmr(void) -{ - if (pmtmr_need_workaround) { - u32 v1, v2, v3; - - /* It has been reported that because of various broken - * chipsets (ICH4, PIIX4 and PIIX4E) where the ACPI PM time - * source is not latched, so you must read it multiple - * times to insure a safe value is read. - */ - do { - v1 = inl(pmtmr_ioport); - v2 = inl(pmtmr_ioport); - v3 = inl(pmtmr_ioport); - } while ((v1 > v2 && v1 < v3) || (v2 > v3 && v2 < v1) - || (v3 > v1 && v3 < v2)); - - /* mask the output to 24 bits */ - return v2 & ACPI_PM_MASK; - } - - return inl(pmtmr_ioport) & ACPI_PM_MASK; -} - - -/* - * Some boards have the PMTMR running way too fast. We check - * the PMTMR rate against PIT channel 2 to catch these cases. - */ -static int verify_pmtmr_rate(void) -{ - u32 value1, value2; - unsigned long count, delta; - - mach_prepare_counter(); - value1 = read_pmtmr(); - mach_countup(&count); - value2 = read_pmtmr(); - delta = (value2 - value1) & ACPI_PM_MASK; - - /* Check that the PMTMR delta is within 5% of what we expect */ - if (delta < (PMTMR_EXPECTED_RATE * 19) / 20 || - delta > (PMTMR_EXPECTED_RATE * 21) / 20) { - printk(KERN_INFO "PM-Timer running at invalid rate: %lu%% of normal - aborting.\n", 100UL * delta / PMTMR_EXPECTED_RATE); - return -1; - } - - return 0; -} - - -static int init_pmtmr(char* override) -{ - u32 value1, value2; - unsigned int i; - - if (override[0] && strncmp(override,"pmtmr",5)) - return -ENODEV; - - if (!pmtmr_ioport) - return -ENODEV; - - /* we use the TSC for delay_pmtmr, so make sure it exists */ - if (!cpu_has_tsc) - return -ENODEV; - - /* "verify" this timing source */ - value1 = read_pmtmr(); - for (i = 0; i < 10000; i++) { - value2 = read_pmtmr(); - if (value2 == value1) - continue; - if (value2 > value1) - goto pm_good; - if ((value2 < value1) && ((value2) < 0xFFF)) - goto pm_good; - printk(KERN_INFO "PM-Timer had inconsistent results: 0x%#x, 0x%#x - aborting.\n", value1, value2); - return -EINVAL; - } - printk(KERN_INFO "PM-Timer had no reasonable result: 0x%#x - aborting.\n", value1); - return -ENODEV; - -pm_good: - if (verify_pmtmr_rate() != 0) - return -ENODEV; - - init_cpu_khz(); - return 0; -} - -static inline u32 cyc2us(u32 cycles) -{ - /* The Power Management Timer ticks at 3.579545 ticks per microsecond. - * 1 / PM_TIMER_FREQUENCY == 0.27936511 =~ 286/1024 [error: 0.024%] - * - * Even with HZ = 100, delta is at maximum 35796 ticks, so it can - * easily be multiplied with 286 (=0x11E) without having to fear - * u32 overflows. - */ - cycles *= 286; - return (cycles >> 10); -} - -/* - * this gets called during each timer interrupt - * - Called while holding the writer xtime_lock - */ -static void mark_offset_pmtmr(void) -{ - u32 lost, delta, last_offset; - static int first_run = 1; - last_offset = offset_tick; - - write_seqlock(&monotonic_lock); - - offset_tick = read_pmtmr(); - - /* calculate tick interval */ - delta = (offset_tick - last_offset) & ACPI_PM_MASK; - - /* convert to usecs */ - delta = cyc2us(delta); - - /* update the monotonic base value */ - monotonic_base += delta * NSEC_PER_USEC; - write_sequnlock(&monotonic_lock); - - /* convert to ticks */ - delta += offset_delay; - lost = delta / (USEC_PER_SEC / HZ); - offset_delay = delta % (USEC_PER_SEC / HZ); - - - /* compensate for lost ticks */ - if (lost >= 2) - jiffies_64 += lost - 1; - - /* don't calculate delay for first run, - or if we've got less then a tick */ - if (first_run || (lost < 1)) { - first_run = 0; - offset_delay = 0; - } -} - -static int pmtmr_resume(void) -{ - write_seqlock(&monotonic_lock); - /* Assume this is the last mark offset time */ - offset_tick = read_pmtmr(); - write_sequnlock(&monotonic_lock); - return 0; -} - -static unsigned long long monotonic_clock_pmtmr(void) -{ - u32 last_offset, this_offset; - unsigned long long base, ret; - unsigned seq; - - - /* atomically read monotonic base & last_offset */ - do { - seq = read_seqbegin(&monotonic_lock); - last_offset = offset_tick; - base = monotonic_base; - } while (read_seqretry(&monotonic_lock, seq)); - - /* Read the pmtmr */ - this_offset = read_pmtmr(); - - /* convert to nanoseconds */ - ret = (this_offset - last_offset) & ACPI_PM_MASK; - ret = base + (cyc2us(ret) * NSEC_PER_USEC); - return ret; -} - -static void delay_pmtmr(unsigned long loops) -{ - unsigned long bclock, now; - - rdtscl(bclock); - do - { - rep_nop(); - rdtscl(now); - } while ((now-bclock) < loops); -} - - -/* - * get the offset (in microseconds) from the last call to mark_offset() - * - Called holding a reader xtime_lock - */ -static unsigned long get_offset_pmtmr(void) -{ - u32 now, offset, delta = 0; - - offset = offset_tick; - now = read_pmtmr(); - delta = (now - offset)&ACPI_PM_MASK; - - return (unsigned long) offset_delay + cyc2us(delta); -} - - -/* acpi timer_opts struct */ -static struct timer_opts timer_pmtmr = { - .name = "pmtmr", - .mark_offset = mark_offset_pmtmr, - .get_offset = get_offset_pmtmr, - .monotonic_clock = monotonic_clock_pmtmr, - .delay = delay_pmtmr, - .read_timer = read_timer_tsc, - .resume = pmtmr_resume, -}; - -struct init_timer_opts __initdata timer_pmtmr_init = { - .init = init_pmtmr, - .opts = &timer_pmtmr, -}; - -#ifdef CONFIG_PCI -/* - * PIIX4 Errata: - * - * The power management timer may return improper results when read. - * Although the timer value settles properly after incrementing, - * while incrementing there is a 3 ns window every 69.8 ns where the - * timer value is indeterminate (a 4.2% chance that the data will be - * incorrect when read). As a result, the ACPI free running count up - * timer specification is violated due to erroneous reads. - */ -static int __init pmtmr_bug_check(void) -{ - static struct pci_device_id gray_list[] __initdata = { - /* these chipsets may have bug. */ - { PCI_DEVICE(PCI_VENDOR_ID_INTEL, - PCI_DEVICE_ID_INTEL_82801DB_0) }, - { }, - }; - struct pci_dev *dev; - int pmtmr_has_bug = 0; - u8 rev; - - if (cur_timer != &timer_pmtmr || !pmtmr_need_workaround) - return 0; - - dev = pci_get_device(PCI_VENDOR_ID_INTEL, - PCI_DEVICE_ID_INTEL_82371AB_3, NULL); - if (dev) { - pci_read_config_byte(dev, PCI_REVISION_ID, &rev); - /* the bug has been fixed in PIIX4M */ - if (rev < 3) { - printk(KERN_WARNING "* Found PM-Timer Bug on this " - "chipset. Due to workarounds for a bug,\n" - "* this time source is slow. Consider trying " - "other time sources (clock=)\n"); - pmtmr_has_bug = 1; - } - pci_dev_put(dev); - } - - if (pci_dev_present(gray_list)) { - printk(KERN_WARNING "* This chipset may have PM-Timer Bug. Due" - " to workarounds for a bug,\n" - "* this time source is slow. If you are sure your timer" - " does not have\n" - "* this bug, please use \"pmtmr_good\" to disable the " - "workaround\n"); - pmtmr_has_bug = 1; - } - - if (!pmtmr_has_bug) - pmtmr_need_workaround = 0; - - return 0; -} -device_initcall(pmtmr_bug_check); -#endif - -static int __init pmtr_good_setup(char *__str) -{ - pmtmr_need_workaround = 0; - return 1; -} -__setup("pmtmr_good", pmtr_good_setup); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>"); -MODULE_DESCRIPTION("Power Management Timer (PMTMR) as primary timing source for x86"); diff --git a/arch/i386/kernel/timers/timer_tsc.c b/arch/i386/kernel/timers/timer_tsc.c deleted file mode 100644 index f1187ddb0d0..00000000000 --- a/arch/i386/kernel/timers/timer_tsc.c +++ /dev/null @@ -1,617 +0,0 @@ -/* - * This code largely moved from arch/i386/kernel/time.c. - * See comments there for proper credits. - * - * 2004-06-25 Jesper Juhl - * moved mark_offset_tsc below cpufreq_delayed_get to avoid gcc 3.4 - * failing to inline. - */ - -#include <linux/spinlock.h> -#include <linux/init.h> -#include <linux/timex.h> -#include <linux/errno.h> -#include <linux/cpufreq.h> -#include <linux/string.h> -#include <linux/jiffies.h> - -#include <asm/timer.h> -#include <asm/io.h> -/* processor.h for distable_tsc flag */ -#include <asm/processor.h> - -#include "io_ports.h" -#include "mach_timer.h" - -#include <asm/hpet.h> -#include <asm/i8253.h> - -#ifdef CONFIG_HPET_TIMER -static unsigned long hpet_usec_quotient; -static unsigned long hpet_last; -static struct timer_opts timer_tsc; -#endif - -static inline void cpufreq_delayed_get(void); - -int tsc_disable __devinitdata = 0; - -static int use_tsc; -/* Number of usecs that the last interrupt was delayed */ -static int delay_at_last_interrupt; - -static unsigned long last_tsc_low; /* lsb 32 bits of Time Stamp Counter */ -static unsigned long last_tsc_high; /* msb 32 bits of Time Stamp Counter */ -static unsigned long long monotonic_base; -static seqlock_t monotonic_lock = SEQLOCK_UNLOCKED; - -/* Avoid compensating for lost ticks before TSCs are synched */ -static int detect_lost_ticks; -static int __init start_lost_tick_compensation(void) -{ - detect_lost_ticks = 1; - return 0; -} -late_initcall(start_lost_tick_compensation); - -/* convert from cycles(64bits) => nanoseconds (64bits) - * basic equation: - * ns = cycles / (freq / ns_per_sec) - * ns = cycles * (ns_per_sec / freq) - * ns = cycles * (10^9 / (cpu_khz * 10^3)) - * ns = cycles * (10^6 / cpu_khz) - * - * Then we use scaling math (suggested by george@mvista.com) to get: - * ns = cycles * (10^6 * SC / cpu_khz) / SC - * ns = cycles * cyc2ns_scale / SC - * - * And since SC is a constant power of two, we can convert the div - * into a shift. - * - * We can use khz divisor instead of mhz to keep a better percision, since - * cyc2ns_scale is limited to 10^6 * 2^10, which fits in 32 bits. - * (mathieu.desnoyers@polymtl.ca) - * - * -johnstul@us.ibm.com "math is hard, lets go shopping!" - */ -static unsigned long cyc2ns_scale __read_mostly; -#define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */ - -static inline void set_cyc2ns_scale(unsigned long cpu_khz) -{ - cyc2ns_scale = (1000000 << CYC2NS_SCALE_FACTOR)/cpu_khz; -} - -static inline unsigned long long cycles_2_ns(unsigned long long cyc) -{ - return (cyc * cyc2ns_scale) >> CYC2NS_SCALE_FACTOR; -} - -static int count2; /* counter for mark_offset_tsc() */ - -/* Cached *multiplier* to convert TSC counts to microseconds. - * (see the equation below). - * Equal to 2^32 * (1 / (clocks per usec) ). - * Initialized in time_init. - */ -static unsigned long fast_gettimeoffset_quotient; - -static unsigned long get_offset_tsc(void) -{ - register unsigned long eax, edx; - - /* Read the Time Stamp Counter */ - - rdtsc(eax,edx); - - /* .. relative to previous jiffy (32 bits is enough) */ - eax -= last_tsc_low; /* tsc_low delta */ - - /* - * Time offset = (tsc_low delta) * fast_gettimeoffset_quotient - * = (tsc_low delta) * (usecs_per_clock) - * = (tsc_low delta) * (usecs_per_jiffy / clocks_per_jiffy) - * - * Using a mull instead of a divl saves up to 31 clock cycles - * in the critical path. - */ - - __asm__("mull %2" - :"=a" (eax), "=d" (edx) - :"rm" (fast_gettimeoffset_quotient), - "0" (eax)); - - /* our adjusted time offset in microseconds */ - return delay_at_last_interrupt + edx; -} - -static unsigned long long monotonic_clock_tsc(void) -{ - unsigned long long last_offset, this_offset, base; - unsigned seq; - - /* atomically read monotonic base & last_offset */ - do { - seq = read_seqbegin(&monotonic_lock); - last_offset = ((unsigned long long)last_tsc_high<<32)|last_tsc_low; - base = monotonic_base; - } while (read_seqretry(&monotonic_lock, seq)); - - /* Read the Time Stamp Counter */ - rdtscll(this_offset); - - /* return the value in ns */ - return base + cycles_2_ns(this_offset - last_offset); -} - -/* - * Scheduler clock - returns current time in nanosec units. - */ -unsigned long long sched_clock(void) -{ - unsigned long long this_offset; - - /* - * In the NUMA case we dont use the TSC as they are not - * synchronized across all CPUs. - */ -#ifndef CONFIG_NUMA - if (!use_tsc) -#endif - /* no locking but a rare wrong value is not a big deal */ - return jiffies_64 * (1000000000 / HZ); - - /* Read the Time Stamp Counter */ - rdtscll(this_offset); - - /* return the value in ns */ - return cycles_2_ns(this_offset); -} - -static void delay_tsc(unsigned long loops) -{ - unsigned long bclock, now; - - rdtscl(bclock); - do - { - rep_nop(); - rdtscl(now); - } while ((now-bclock) < loops); -} - -#ifdef CONFIG_HPET_TIMER -static void mark_offset_tsc_hpet(void) -{ - unsigned long long this_offset, last_offset; - unsigned long offset, temp, hpet_current; - - write_seqlock(&monotonic_lock); - last_offset = ((unsigned long long)last_tsc_high<<32)|last_tsc_low; - /* - * It is important that these two operations happen almost at - * the same time. We do the RDTSC stuff first, since it's - * faster. To avoid any inconsistencies, we need interrupts - * disabled locally. - */ - /* - * Interrupts are just disabled locally since the timer irq - * has the SA_INTERRUPT flag set. -arca - */ - /* read Pentium cycle counter */ - - hpet_current = hpet_readl(HPET_COUNTER); - rdtsc(last_tsc_low, last_tsc_high); - - /* lost tick compensation */ - offset = hpet_readl(HPET_T0_CMP) - hpet_tick; - if (unlikely(((offset - hpet_last) > hpet_tick) && (hpet_last != 0)) - && detect_lost_ticks) { - int lost_ticks = (offset - hpet_last) / hpet_tick; - jiffies_64 += lost_ticks; - } - hpet_last = hpet_current; - - /* update the monotonic base value */ - this_offset = ((unsigned long long)last_tsc_high<<32)|last_tsc_low; - monotonic_base += cycles_2_ns(this_offset - last_offset); - write_sequnlock(&monotonic_lock); - - /* calculate delay_at_last_interrupt */ - /* - * Time offset = (hpet delta) * ( usecs per HPET clock ) - * = (hpet delta) * ( usecs per tick / HPET clocks per tick) - * = (hpet delta) * ( hpet_usec_quotient ) / (2^32) - * Where, - * hpet_usec_quotient = (2^32 * usecs per tick)/HPET clocks per tick - */ - delay_at_last_interrupt = hpet_current - offset; - ASM_MUL64_REG(temp, delay_at_last_interrupt, - hpet_usec_quotient, delay_at_last_interrupt); -} -#endif - - -#ifdef CONFIG_CPU_FREQ -#include <linux/workqueue.h> - -static unsigned int cpufreq_delayed_issched = 0; -static unsigned int cpufreq_init = 0; -static struct work_struct cpufreq_delayed_get_work; - -static void handle_cpufreq_delayed_get(void *v) -{ - unsigned int cpu; - for_each_online_cpu(cpu) { - cpufreq_get(cpu); - } - cpufreq_delayed_issched = 0; -} - -/* if we notice lost ticks, schedule a call to cpufreq_get() as it tries - * to verify the CPU frequency the timing core thinks the CPU is running - * at is still correct. - */ -static inline void cpufreq_delayed_get(void) -{ - if (cpufreq_init && !cpufreq_delayed_issched) { - cpufreq_delayed_issched = 1; - printk(KERN_DEBUG "Losing some ticks... checking if CPU frequency changed.\n"); - schedule_work(&cpufreq_delayed_get_work); - } -} - -/* If the CPU frequency is scaled, TSC-based delays will need a different - * loops_per_jiffy value to function properly. - */ - -static unsigned int ref_freq = 0; -static unsigned long loops_per_jiffy_ref = 0; - -#ifndef CONFIG_SMP -static unsigned long fast_gettimeoffset_ref = 0; -static unsigned int cpu_khz_ref = 0; -#endif - -static int -time_cpufreq_notifier(struct notifier_block *nb, unsigned long val, - void *data) -{ - struct cpufreq_freqs *freq = data; - - if (val != CPUFREQ_RESUMECHANGE && val != CPUFREQ_SUSPENDCHANGE) - write_seqlock_irq(&xtime_lock); - if (!ref_freq) { - if (!freq->old){ - ref_freq = freq->new; - goto end; - } - ref_freq = freq->old; - loops_per_jiffy_ref = cpu_data[freq->cpu].loops_per_jiffy; -#ifndef CONFIG_SMP - fast_gettimeoffset_ref = fast_gettimeoffset_quotient; - cpu_khz_ref = cpu_khz; -#endif - } - - if ((val == CPUFREQ_PRECHANGE && freq->old < freq->new) || - (val == CPUFREQ_POSTCHANGE && freq->old > freq->new) || - (val == CPUFREQ_RESUMECHANGE)) { - if (!(freq->flags & CPUFREQ_CONST_LOOPS)) - cpu_data[freq->cpu].loops_per_jiffy = cpufreq_scale(loops_per_jiffy_ref, ref_freq, freq->new); -#ifndef CONFIG_SMP - if (cpu_khz) - cpu_khz = cpufreq_scale(cpu_khz_ref, ref_freq, freq->new); - if (use_tsc) { - if (!(freq->flags & CPUFREQ_CONST_LOOPS)) { - fast_gettimeoffset_quotient = cpufreq_scale(fast_gettimeoffset_ref, freq->new, ref_freq); - set_cyc2ns_scale(cpu_khz); - } - } -#endif - } - -end: - if (val != CPUFREQ_RESUMECHANGE && val != CPUFREQ_SUSPENDCHANGE) - write_sequnlock_irq(&xtime_lock); - - return 0; -} - -static struct notifier_block time_cpufreq_notifier_block = { - .notifier_call = time_cpufreq_notifier -}; - - -static int __init cpufreq_tsc(void) -{ - int ret; - INIT_WORK(&cpufreq_delayed_get_work, handle_cpufreq_delayed_get, NULL); - ret = cpufreq_register_notifier(&time_cpufreq_notifier_block, - CPUFREQ_TRANSITION_NOTIFIER); - if (!ret) - cpufreq_init = 1; - return ret; -} -core_initcall(cpufreq_tsc); - -#else /* CONFIG_CPU_FREQ */ -static inline void cpufreq_delayed_get(void) { return; } -#endif - -int recalibrate_cpu_khz(void) -{ -#ifndef CONFIG_SMP - unsigned int cpu_khz_old = cpu_khz; - - if (cpu_has_tsc) { - local_irq_disable(); - init_cpu_khz(); - local_irq_enable(); - cpu_data[0].loops_per_jiffy = - cpufreq_scale(cpu_data[0].loops_per_jiffy, - cpu_khz_old, - cpu_khz); - return 0; - } else - return -ENODEV; -#else - return -ENODEV; -#endif -} -EXPORT_SYMBOL(recalibrate_cpu_khz); - -static void mark_offset_tsc(void) -{ - unsigned long lost,delay; - unsigned long delta = last_tsc_low; - int count; - int countmp; - static int count1 = 0; - unsigned long long this_offset, last_offset; - static int lost_count = 0; - - write_seqlock(&monotonic_lock); - last_offset = ((unsigned long long)last_tsc_high<<32)|last_tsc_low; - /* - * It is important that these two operations happen almost at - * the same time. We do the RDTSC stuff first, since it's - * faster. To avoid any inconsistencies, we need interrupts - * disabled locally. - */ - - /* - * Interrupts are just disabled locally since the timer irq - * has the SA_INTERRUPT flag set. -arca - */ - - /* read Pentium cycle counter */ - - rdtsc(last_tsc_low, last_tsc_high); - - spin_lock(&i8253_lock); - outb_p(0x00, PIT_MODE); /* latch the count ASAP */ - - count = inb_p(PIT_CH0); /* read the latched count */ - count |= inb(PIT_CH0) << 8; - - /* - * VIA686a test code... reset the latch if count > max + 1 - * from timer_pit.c - cjb - */ - if (count > LATCH) { - outb_p(0x34, PIT_MODE); - outb_p(LATCH & 0xff, PIT_CH0); - outb(LATCH >> 8, PIT_CH0); - count = LATCH - 1; - } - - spin_unlock(&i8253_lock); - - if (pit_latch_buggy) { - /* get center value of last 3 time lutch */ - if ((count2 >= count && count >= count1) - || (count1 >= count && count >= count2)) { - count2 = count1; count1 = count; - } else if ((count1 >= count2 && count2 >= count) - || (count >= count2 && count2 >= count1)) { - countmp = count;count = count2; - count2 = count1;count1 = countmp; - } else { - count2 = count1; count1 = count; count = count1; - } - } - - /* lost tick compensation */ - delta = last_tsc_low - delta; - { - register unsigned long eax, edx; - eax = delta; - __asm__("mull %2" - :"=a" (eax), "=d" (edx) - :"rm" (fast_gettimeoffset_quotient), - "0" (eax)); - delta = edx; - } - delta += delay_at_last_interrupt; - lost = delta/(1000000/HZ); - delay = delta%(1000000/HZ); - if (lost >= 2 && detect_lost_ticks) { - jiffies_64 += lost-1; - - /* sanity check to ensure we're not always losing ticks */ - if (lost_count++ > 100) { - printk(KERN_WARNING "Losing too many ticks!\n"); - printk(KERN_WARNING "TSC cannot be used as a timesource. \n"); - printk(KERN_WARNING "Possible reasons for this are:\n"); - printk(KERN_WARNING " You're running with Speedstep,\n"); - printk(KERN_WARNING " You don't have DMA enabled for your hard disk (see hdparm),\n"); - printk(KERN_WARNING " Incorrect TSC synchronization on an SMP system (see dmesg).\n"); - printk(KERN_WARNING "Falling back to a sane timesource now.\n"); - - clock_fallback(); - } - /* ... but give the TSC a fair chance */ - if (lost_count > 25) - cpufreq_delayed_get(); - } else - lost_count = 0; - /* update the monotonic base value */ - this_offset = ((unsigned long long)last_tsc_high<<32)|last_tsc_low; - monotonic_base += cycles_2_ns(this_offset - last_offset); - write_sequnlock(&monotonic_lock); - - /* calculate delay_at_last_interrupt */ - count = ((LATCH-1) - count) * TICK_SIZE; - delay_at_last_interrupt = (count + LATCH/2) / LATCH; - - /* catch corner case where tick rollover occured - * between tsc and pit reads (as noted when - * usec delta is > 90% # of usecs/tick) - */ - if (lost && abs(delay - delay_at_last_interrupt) > (900000/HZ)) - jiffies_64++; -} - -static int __init init_tsc(char* override) -{ - - /* check clock override */ - if (override[0] && strncmp(override,"tsc",3)) { -#ifdef CONFIG_HPET_TIMER - if (is_hpet_enabled()) { - printk(KERN_ERR "Warning: clock= override failed. Defaulting to tsc\n"); - } else -#endif - { - return -ENODEV; - } - } - - /* - * If we have APM enabled or the CPU clock speed is variable - * (CPU stops clock on HLT or slows clock to save power) - * then the TSC timestamps may diverge by up to 1 jiffy from - * 'real time' but nothing will break. - * The most frequent case is that the CPU is "woken" from a halt - * state by the timer interrupt itself, so we get 0 error. In the - * rare cases where a driver would "wake" the CPU and request a - * timestamp, the maximum error is < 1 jiffy. But timestamps are - * still perfectly ordered. - * Note that the TSC counter will be reset if APM suspends - * to disk; this won't break the kernel, though, 'cuz we're - * smart. See arch/i386/kernel/apm.c. - */ - /* - * Firstly we have to do a CPU check for chips with - * a potentially buggy TSC. At this point we haven't run - * the ident/bugs checks so we must run this hook as it - * may turn off the TSC flag. - * - * NOTE: this doesn't yet handle SMP 486 machines where only - * some CPU's have a TSC. Thats never worked and nobody has - * moaned if you have the only one in the world - you fix it! - */ - - count2 = LATCH; /* initialize counter for mark_offset_tsc() */ - - if (cpu_has_tsc) { - unsigned long tsc_quotient; -#ifdef CONFIG_HPET_TIMER - if (is_hpet_enabled() && hpet_use_timer) { - unsigned long result, remain; - printk("Using TSC for gettimeofday\n"); - tsc_quotient = calibrate_tsc_hpet(NULL); - timer_tsc.mark_offset = &mark_offset_tsc_hpet; - /* - * Math to calculate hpet to usec multiplier - * Look for the comments at get_offset_tsc_hpet() - */ - ASM_DIV64_REG(result, remain, hpet_tick, - 0, KERNEL_TICK_USEC); - if (remain > (hpet_tick >> 1)) - result++; /* rounding the result */ - - hpet_usec_quotient = result; - } else -#endif - { - tsc_quotient = calibrate_tsc(); - } - - if (tsc_quotient) { - fast_gettimeoffset_quotient = tsc_quotient; - use_tsc = 1; - /* - * We could be more selective here I suspect - * and just enable this for the next intel chips ? - */ - /* report CPU clock rate in Hz. - * The formula is (10^6 * 2^32) / (2^32 * 1 / (clocks/us)) = - * clock/second. Our precision is about 100 ppm. - */ - { unsigned long eax=0, edx=1000; - __asm__("divl %2" - :"=a" (cpu_khz), "=d" (edx) - :"r" (tsc_quotient), - "0" (eax), "1" (edx)); - printk("Detected %u.%03u MHz processor.\n", - cpu_khz / 1000, cpu_khz % 1000); - } - set_cyc2ns_scale(cpu_khz); - return 0; - } - } - return -ENODEV; -} - -static int tsc_resume(void) -{ - write_seqlock(&monotonic_lock); - /* Assume this is the last mark offset time */ - rdtsc(last_tsc_low, last_tsc_high); -#ifdef CONFIG_HPET_TIMER - if (is_hpet_enabled() && hpet_use_timer) - hpet_last = hpet_readl(HPET_COUNTER); -#endif - write_sequnlock(&monotonic_lock); - return 0; -} - -#ifndef CONFIG_X86_TSC -/* disable flag for tsc. Takes effect by clearing the TSC cpu flag - * in cpu/common.c */ -static int __init tsc_setup(char *str) -{ - tsc_disable = 1; - return 1; -} -#else -static int __init tsc_setup(char *str) -{ - printk(KERN_WARNING "notsc: Kernel compiled with CONFIG_X86_TSC, " - "cannot disable TSC.\n"); - return 1; -} -#endif -__setup("notsc", tsc_setup); - - - -/************************************************************/ - -/* tsc timer_opts struct */ -static struct timer_opts timer_tsc = { - .name = "tsc", - .mark_offset = mark_offset_tsc, - .get_offset = get_offset_tsc, - .monotonic_clock = monotonic_clock_tsc, - .delay = delay_tsc, - .read_timer = read_timer_tsc, - .resume = tsc_resume, -}; - -struct init_timer_opts __initdata timer_tsc_init = { - .init = init_tsc, - .opts = &timer_tsc, -}; diff --git a/arch/i386/kernel/topology.c b/arch/i386/kernel/topology.c index 296355292c7..e2e281d4bcc 100644 --- a/arch/i386/kernel/topology.c +++ b/arch/i386/kernel/topology.c @@ -32,15 +32,8 @@ static struct i386_cpu cpu_devices[NR_CPUS]; -int arch_register_cpu(int num){ - struct node *parent = NULL; - -#ifdef CONFIG_NUMA - int node = cpu_to_node(num); - if (node_online(node)) - parent = &node_devices[node].node; -#endif /* CONFIG_NUMA */ - +int arch_register_cpu(int num) +{ /* * CPU0 cannot be offlined due to several * restrictions and assumptions in kernel. This basically @@ -50,21 +43,13 @@ int arch_register_cpu(int num){ if (!num) cpu_devices[num].cpu.no_control = 1; - return register_cpu(&cpu_devices[num].cpu, num, parent); + return register_cpu(&cpu_devices[num].cpu, num); } #ifdef CONFIG_HOTPLUG_CPU void arch_unregister_cpu(int num) { - struct node *parent = NULL; - -#ifdef CONFIG_NUMA - int node = cpu_to_node(num); - if (node_online(node)) - parent = &node_devices[node].node; -#endif /* CONFIG_NUMA */ - - return unregister_cpu(&cpu_devices[num].cpu, parent); + return unregister_cpu(&cpu_devices[num].cpu); } EXPORT_SYMBOL(arch_register_cpu); EXPORT_SYMBOL(arch_unregister_cpu); @@ -74,16 +59,13 @@ EXPORT_SYMBOL(arch_unregister_cpu); #ifdef CONFIG_NUMA #include <linux/mmzone.h> -#include <asm/node.h> - -struct i386_node node_devices[MAX_NUMNODES]; static int __init topology_init(void) { int i; for_each_online_node(i) - arch_register_node(i); + register_one_node(i); for_each_present_cpu(i) arch_register_cpu(i); diff --git a/arch/i386/kernel/traps.c b/arch/i386/kernel/traps.c index dcc14477af1..78464097470 100644 --- a/arch/i386/kernel/traps.c +++ b/arch/i386/kernel/traps.c @@ -28,6 +28,7 @@ #include <linux/utsname.h> #include <linux/kprobes.h> #include <linux/kexec.h> +#include <linux/unwind.h> #ifdef CONFIG_EISA #include <linux/ioport.h> @@ -47,7 +48,7 @@ #include <asm/desc.h> #include <asm/i387.h> #include <asm/nmi.h> - +#include <asm/unwind.h> #include <asm/smp.h> #include <asm/arch_hooks.h> #include <asm/kdebug.h> @@ -92,6 +93,7 @@ asmlinkage void spurious_interrupt_bug(void); asmlinkage void machine_check(void); static int kstack_depth_to_print = 24; +static int call_trace = 1; ATOMIC_NOTIFIER_HEAD(i386die_chain); int register_die_notifier(struct notifier_block *nb) @@ -170,7 +172,23 @@ static inline unsigned long print_context_stack(struct thread_info *tinfo, return ebp; } -static void show_trace_log_lvl(struct task_struct *task, +static asmlinkage int show_trace_unwind(struct unwind_frame_info *info, void *log_lvl) +{ + int n = 0; + int printed = 0; /* nr of entries already printed on current line */ + + while (unwind(info) == 0 && UNW_PC(info)) { + ++n; + printed = print_addr_and_symbol(UNW_PC(info), log_lvl, printed); + if (arch_unw_user_mode(info)) + break; + } + if (printed) + printk("\n"); + return n; +} + +static void show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs, unsigned long *stack, char *log_lvl) { unsigned long ebp; @@ -178,6 +196,26 @@ static void show_trace_log_lvl(struct task_struct *task, if (!task) task = current; + if (call_trace >= 0) { + int unw_ret = 0; + struct unwind_frame_info info; + + if (regs) { + if (unwind_init_frame_info(&info, task, regs) == 0) + unw_ret = show_trace_unwind(&info, log_lvl); + } else if (task == current) + unw_ret = unwind_init_running(&info, show_trace_unwind, log_lvl); + else { + if (unwind_init_blocked(&info, task) == 0) + unw_ret = show_trace_unwind(&info, log_lvl); + } + if (unw_ret > 0) { + if (call_trace > 0) + return; + printk("%sLegacy call trace:\n", log_lvl); + } + } + if (task == current) { /* Grab ebp right from our regs */ asm ("movl %%ebp, %0" : "=r" (ebp) : ); @@ -198,13 +236,13 @@ static void show_trace_log_lvl(struct task_struct *task, } } -void show_trace(struct task_struct *task, unsigned long * stack) +void show_trace(struct task_struct *task, struct pt_regs *regs, unsigned long * stack) { - show_trace_log_lvl(task, stack, ""); + show_trace_log_lvl(task, regs, stack, ""); } -static void show_stack_log_lvl(struct task_struct *task, unsigned long *esp, - char *log_lvl) +static void show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs, + unsigned long *esp, char *log_lvl) { unsigned long *stack; int i; @@ -225,13 +263,13 @@ static void show_stack_log_lvl(struct task_struct *task, unsigned long *esp, printk("%08lx ", *stack++); } printk("\n%sCall Trace:\n", log_lvl); - show_trace_log_lvl(task, esp, log_lvl); + show_trace_log_lvl(task, regs, esp, log_lvl); } void show_stack(struct task_struct *task, unsigned long *esp) { printk(" "); - show_stack_log_lvl(task, esp, ""); + show_stack_log_lvl(task, NULL, esp, ""); } /* @@ -241,7 +279,7 @@ void dump_stack(void) { unsigned long stack; - show_trace(current, &stack); + show_trace(current, NULL, &stack); } EXPORT_SYMBOL(dump_stack); @@ -285,7 +323,7 @@ void show_registers(struct pt_regs *regs) u8 __user *eip; printk("\n" KERN_EMERG "Stack: "); - show_stack_log_lvl(NULL, (unsigned long *)esp, KERN_EMERG); + show_stack_log_lvl(NULL, regs, (unsigned long *)esp, KERN_EMERG); printk(KERN_EMERG "Code: "); @@ -1215,3 +1253,15 @@ static int __init kstack_setup(char *s) return 1; } __setup("kstack=", kstack_setup); + +static int __init call_trace_setup(char *s) +{ + if (strcmp(s, "old") == 0) + call_trace = -1; + else if (strcmp(s, "both") == 0) + call_trace = 0; + else if (strcmp(s, "new") == 0) + call_trace = 1; + return 1; +} +__setup("call_trace=", call_trace_setup); diff --git a/arch/i386/kernel/tsc.c b/arch/i386/kernel/tsc.c new file mode 100644 index 00000000000..7e0d8dab207 --- /dev/null +++ b/arch/i386/kernel/tsc.c @@ -0,0 +1,478 @@ +/* + * This code largely moved from arch/i386/kernel/timer/timer_tsc.c + * which was originally moved from arch/i386/kernel/time.c. + * See comments there for proper credits. + */ + +#include <linux/clocksource.h> +#include <linux/workqueue.h> +#include <linux/cpufreq.h> +#include <linux/jiffies.h> +#include <linux/init.h> +#include <linux/dmi.h> + +#include <asm/delay.h> +#include <asm/tsc.h> +#include <asm/delay.h> +#include <asm/io.h> + +#include "mach_timer.h" + +/* + * On some systems the TSC frequency does not + * change with the cpu frequency. So we need + * an extra value to store the TSC freq + */ +unsigned int tsc_khz; + +int tsc_disable __cpuinitdata = 0; + +#ifdef CONFIG_X86_TSC +static int __init tsc_setup(char *str) +{ + printk(KERN_WARNING "notsc: Kernel compiled with CONFIG_X86_TSC, " + "cannot disable TSC.\n"); + return 1; +} +#else +/* + * disable flag for tsc. Takes effect by clearing the TSC cpu flag + * in cpu/common.c + */ +static int __init tsc_setup(char *str) +{ + tsc_disable = 1; + + return 1; +} +#endif + +__setup("notsc", tsc_setup); + +/* + * code to mark and check if the TSC is unstable + * due to cpufreq or due to unsynced TSCs + */ +static int tsc_unstable; + +static inline int check_tsc_unstable(void) +{ + return tsc_unstable; +} + +void mark_tsc_unstable(void) +{ + tsc_unstable = 1; +} +EXPORT_SYMBOL_GPL(mark_tsc_unstable); + +/* Accellerators for sched_clock() + * convert from cycles(64bits) => nanoseconds (64bits) + * basic equation: + * ns = cycles / (freq / ns_per_sec) + * ns = cycles * (ns_per_sec / freq) + * ns = cycles * (10^9 / (cpu_khz * 10^3)) + * ns = cycles * (10^6 / cpu_khz) + * + * Then we use scaling math (suggested by george@mvista.com) to get: + * ns = cycles * (10^6 * SC / cpu_khz) / SC + * ns = cycles * cyc2ns_scale / SC + * + * And since SC is a constant power of two, we can convert the div + * into a shift. + * + * We can use khz divisor instead of mhz to keep a better percision, since + * cyc2ns_scale is limited to 10^6 * 2^10, which fits in 32 bits. + * (mathieu.desnoyers@polymtl.ca) + * + * -johnstul@us.ibm.com "math is hard, lets go shopping!" + */ +static unsigned long cyc2ns_scale __read_mostly; + +#define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */ + +static inline void set_cyc2ns_scale(unsigned long cpu_khz) +{ + cyc2ns_scale = (1000000 << CYC2NS_SCALE_FACTOR)/cpu_khz; +} + +static inline unsigned long long cycles_2_ns(unsigned long long cyc) +{ + return (cyc * cyc2ns_scale) >> CYC2NS_SCALE_FACTOR; +} + +/* + * Scheduler clock - returns current time in nanosec units. + */ +unsigned long long sched_clock(void) +{ + unsigned long long this_offset; + + /* + * in the NUMA case we dont use the TSC as they are not + * synchronized across all CPUs. + */ +#ifndef CONFIG_NUMA + if (!cpu_khz || check_tsc_unstable()) +#endif + /* no locking but a rare wrong value is not a big deal */ + return (jiffies_64 - INITIAL_JIFFIES) * (1000000000 / HZ); + + /* read the Time Stamp Counter: */ + rdtscll(this_offset); + + /* return the value in ns */ + return cycles_2_ns(this_offset); +} + +static unsigned long calculate_cpu_khz(void) +{ + unsigned long long start, end; + unsigned long count; + u64 delta64; + int i; + unsigned long flags; + + local_irq_save(flags); + + /* run 3 times to ensure the cache is warm */ + for (i = 0; i < 3; i++) { + mach_prepare_counter(); + rdtscll(start); + mach_countup(&count); + rdtscll(end); + } + /* + * Error: ECTCNEVERSET + * The CTC wasn't reliable: we got a hit on the very first read, + * or the CPU was so fast/slow that the quotient wouldn't fit in + * 32 bits.. + */ + if (count <= 1) + goto err; + + delta64 = end - start; + + /* cpu freq too fast: */ + if (delta64 > (1ULL<<32)) + goto err; + + /* cpu freq too slow: */ + if (delta64 <= CALIBRATE_TIME_MSEC) + goto err; + + delta64 += CALIBRATE_TIME_MSEC/2; /* round for do_div */ + do_div(delta64,CALIBRATE_TIME_MSEC); + + local_irq_restore(flags); + return (unsigned long)delta64; +err: + local_irq_restore(flags); + return 0; +} + +int recalibrate_cpu_khz(void) +{ +#ifndef CONFIG_SMP + unsigned long cpu_khz_old = cpu_khz; + + if (cpu_has_tsc) { + cpu_khz = calculate_cpu_khz(); + tsc_khz = cpu_khz; + cpu_data[0].loops_per_jiffy = + cpufreq_scale(cpu_data[0].loops_per_jiffy, + cpu_khz_old, cpu_khz); + return 0; + } else + return -ENODEV; +#else + return -ENODEV; +#endif +} + +EXPORT_SYMBOL(recalibrate_cpu_khz); + +void tsc_init(void) +{ + if (!cpu_has_tsc || tsc_disable) + return; + + cpu_khz = calculate_cpu_khz(); + tsc_khz = cpu_khz; + + if (!cpu_khz) + return; + + printk("Detected %lu.%03lu MHz processor.\n", + (unsigned long)cpu_khz / 1000, + (unsigned long)cpu_khz % 1000); + + set_cyc2ns_scale(cpu_khz); + use_tsc_delay(); +} + +#ifdef CONFIG_CPU_FREQ + +static unsigned int cpufreq_delayed_issched = 0; +static unsigned int cpufreq_init = 0; +static struct work_struct cpufreq_delayed_get_work; + +static void handle_cpufreq_delayed_get(void *v) +{ + unsigned int cpu; + + for_each_online_cpu(cpu) + cpufreq_get(cpu); + + cpufreq_delayed_issched = 0; +} + +/* + * if we notice cpufreq oddness, schedule a call to cpufreq_get() as it tries + * to verify the CPU frequency the timing core thinks the CPU is running + * at is still correct. + */ +static inline void cpufreq_delayed_get(void) +{ + if (cpufreq_init && !cpufreq_delayed_issched) { + cpufreq_delayed_issched = 1; + printk(KERN_DEBUG "Checking if CPU frequency changed.\n"); + schedule_work(&cpufreq_delayed_get_work); + } +} + +/* + * if the CPU frequency is scaled, TSC-based delays will need a different + * loops_per_jiffy value to function properly. + */ +static unsigned int ref_freq = 0; +static unsigned long loops_per_jiffy_ref = 0; +static unsigned long cpu_khz_ref = 0; + +static int +time_cpufreq_notifier(struct notifier_block *nb, unsigned long val, void *data) +{ + struct cpufreq_freqs *freq = data; + + if (val != CPUFREQ_RESUMECHANGE && val != CPUFREQ_SUSPENDCHANGE) + write_seqlock_irq(&xtime_lock); + + if (!ref_freq) { + if (!freq->old){ + ref_freq = freq->new; + goto end; + } + ref_freq = freq->old; + loops_per_jiffy_ref = cpu_data[freq->cpu].loops_per_jiffy; + cpu_khz_ref = cpu_khz; + } + + if ((val == CPUFREQ_PRECHANGE && freq->old < freq->new) || + (val == CPUFREQ_POSTCHANGE && freq->old > freq->new) || + (val == CPUFREQ_RESUMECHANGE)) { + if (!(freq->flags & CPUFREQ_CONST_LOOPS)) + cpu_data[freq->cpu].loops_per_jiffy = + cpufreq_scale(loops_per_jiffy_ref, + ref_freq, freq->new); + + if (cpu_khz) { + + if (num_online_cpus() == 1) + cpu_khz = cpufreq_scale(cpu_khz_ref, + ref_freq, freq->new); + if (!(freq->flags & CPUFREQ_CONST_LOOPS)) { + tsc_khz = cpu_khz; + set_cyc2ns_scale(cpu_khz); + /* + * TSC based sched_clock turns + * to junk w/ cpufreq + */ + mark_tsc_unstable(); + } + } + } +end: + if (val != CPUFREQ_RESUMECHANGE && val != CPUFREQ_SUSPENDCHANGE) + write_sequnlock_irq(&xtime_lock); + + return 0; +} + +static struct notifier_block time_cpufreq_notifier_block = { + .notifier_call = time_cpufreq_notifier +}; + +static int __init cpufreq_tsc(void) +{ + int ret; + + INIT_WORK(&cpufreq_delayed_get_work, handle_cpufreq_delayed_get, NULL); + ret = cpufreq_register_notifier(&time_cpufreq_notifier_block, + CPUFREQ_TRANSITION_NOTIFIER); + if (!ret) + cpufreq_init = 1; + + return ret; +} + +core_initcall(cpufreq_tsc); + +#endif + +/* clock source code */ + +static unsigned long current_tsc_khz = 0; +static int tsc_update_callback(void); + +static cycle_t read_tsc(void) +{ + cycle_t ret; + + rdtscll(ret); + + return ret; +} + +static struct clocksource clocksource_tsc = { + .name = "tsc", + .rating = 300, + .read = read_tsc, + .mask = CLOCKSOURCE_MASK(64), + .mult = 0, /* to be set */ + .shift = 22, + .update_callback = tsc_update_callback, + .is_continuous = 1, +}; + +static int tsc_update_callback(void) +{ + int change = 0; + + /* check to see if we should switch to the safe clocksource: */ + if (clocksource_tsc.rating != 50 && check_tsc_unstable()) { + clocksource_tsc.rating = 50; + clocksource_reselect(); + change = 1; + } + + /* only update if tsc_khz has changed: */ + if (current_tsc_khz != tsc_khz) { + current_tsc_khz = tsc_khz; + clocksource_tsc.mult = clocksource_khz2mult(current_tsc_khz, + clocksource_tsc.shift); + change = 1; + } + + return change; +} + +static int __init dmi_mark_tsc_unstable(struct dmi_system_id *d) +{ + printk(KERN_NOTICE "%s detected: marking TSC unstable.\n", + d->ident); + mark_tsc_unstable(); + return 0; +} + +/* List of systems that have known TSC problems */ +static struct dmi_system_id __initdata bad_tsc_dmi_table[] = { + { + .callback = dmi_mark_tsc_unstable, + .ident = "IBM Thinkpad 380XD", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), + DMI_MATCH(DMI_BOARD_NAME, "2635FA0"), + }, + }, + {} +}; + +#define TSC_FREQ_CHECK_INTERVAL (10*MSEC_PER_SEC) /* 10sec in MS */ +static struct timer_list verify_tsc_freq_timer; + +/* XXX - Probably should add locking */ +static void verify_tsc_freq(unsigned long unused) +{ + static u64 last_tsc; + static unsigned long last_jiffies; + + u64 now_tsc, interval_tsc; + unsigned long now_jiffies, interval_jiffies; + + + if (check_tsc_unstable()) + return; + + rdtscll(now_tsc); + now_jiffies = jiffies; + + if (!last_jiffies) { + goto out; + } + + interval_jiffies = now_jiffies - last_jiffies; + interval_tsc = now_tsc - last_tsc; + interval_tsc *= HZ; + do_div(interval_tsc, cpu_khz*1000); + + if (interval_tsc < (interval_jiffies * 3 / 4)) { + printk("TSC appears to be running slowly. " + "Marking it as unstable\n"); + mark_tsc_unstable(); + return; + } + +out: + last_tsc = now_tsc; + last_jiffies = now_jiffies; + /* set us up to go off on the next interval: */ + mod_timer(&verify_tsc_freq_timer, + jiffies + msecs_to_jiffies(TSC_FREQ_CHECK_INTERVAL)); +} + +/* + * Make an educated guess if the TSC is trustworthy and synchronized + * over all CPUs. + */ +static __init int unsynchronized_tsc(void) +{ + /* + * Intel systems are normally all synchronized. + * Exceptions must mark TSC as unstable: + */ + if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) + return 0; + + /* assume multi socket systems are not synchronized: */ + return num_possible_cpus() > 1; +} + +static int __init init_tsc_clocksource(void) +{ + + if (cpu_has_tsc && tsc_khz && !tsc_disable) { + /* check blacklist */ + dmi_check_system(bad_tsc_dmi_table); + + if (unsynchronized_tsc()) /* mark unstable if unsynced */ + mark_tsc_unstable(); + current_tsc_khz = tsc_khz; + clocksource_tsc.mult = clocksource_khz2mult(current_tsc_khz, + clocksource_tsc.shift); + /* lower the rating if we already know its unstable: */ + if (check_tsc_unstable()) + clocksource_tsc.rating = 50; + + init_timer(&verify_tsc_freq_timer); + verify_tsc_freq_timer.function = verify_tsc_freq; + verify_tsc_freq_timer.expires = + jiffies + msecs_to_jiffies(TSC_FREQ_CHECK_INTERVAL); + add_timer(&verify_tsc_freq_timer); + + return clocksource_register(&clocksource_tsc); + } + + return 0; +} + +module_init(init_tsc_clocksource); diff --git a/arch/i386/kernel/vmlinux.lds.S b/arch/i386/kernel/vmlinux.lds.S index 7512f39c9f2..2d4f1386e2b 100644 --- a/arch/i386/kernel/vmlinux.lds.S +++ b/arch/i386/kernel/vmlinux.lds.S @@ -71,6 +71,15 @@ SECTIONS .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) { *(.data.read_mostly) } _edata = .; /* End of data section */ +#ifdef CONFIG_STACK_UNWIND + . = ALIGN(4); + .eh_frame : AT(ADDR(.eh_frame) - LOAD_OFFSET) { + __start_unwind = .; + *(.eh_frame) + __end_unwind = .; + } +#endif + . = ALIGN(THREAD_SIZE); /* init_task */ .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) { *(.data.init_task) diff --git a/arch/i386/kernel/vsyscall-sysenter.S b/arch/i386/kernel/vsyscall-sysenter.S index 3b62baa6a37..1a36d26e15e 100644 --- a/arch/i386/kernel/vsyscall-sysenter.S +++ b/arch/i386/kernel/vsyscall-sysenter.S @@ -42,10 +42,10 @@ __kernel_vsyscall: /* 7: align return point with nop's to make disassembly easier */ .space 7,0x90 - /* 14: System call restart point is here! (SYSENTER_RETURN - 2) */ + /* 14: System call restart point is here! (SYSENTER_RETURN-2) */ jmp .Lenter_kernel /* 16: System call normal return point is here! */ - .globl SYSENTER_RETURN /* Symbol used by entry.S. */ + .globl SYSENTER_RETURN /* Symbol used by sysenter.c */ SYSENTER_RETURN: pop %ebp .Lpop_ebp: diff --git a/arch/i386/kernel/vsyscall.lds.S b/arch/i386/kernel/vsyscall.lds.S index 98699ca6e52..e26975fc68b 100644 --- a/arch/i386/kernel/vsyscall.lds.S +++ b/arch/i386/kernel/vsyscall.lds.S @@ -7,7 +7,7 @@ SECTIONS { - . = VSYSCALL_BASE + SIZEOF_HEADERS; + . = VDSO_PRELINK + SIZEOF_HEADERS; .hash : { *(.hash) } :text .dynsym : { *(.dynsym) } @@ -20,7 +20,7 @@ SECTIONS For the layouts to match, we need to skip more than enough space for the dynamic symbol table et al. If this amount is insufficient, ld -shared will barf. Just increase it here. */ - . = VSYSCALL_BASE + 0x400; + . = VDSO_PRELINK + 0x400; .text : { *(.text) } :text =0x90909090 .note : { *(.note.*) } :text :note |