summaryrefslogtreecommitdiffstats
path: root/arch/i386/pci/mmconfig.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/i386/pci/mmconfig.c')
-rw-r--r--arch/i386/pci/mmconfig.c41
1 files changed, 39 insertions, 2 deletions
diff --git a/arch/i386/pci/mmconfig.c b/arch/i386/pci/mmconfig.c
index 972180f738d..05be8db58a8 100644
--- a/arch/i386/pci/mmconfig.c
+++ b/arch/i386/pci/mmconfig.c
@@ -151,6 +151,38 @@ static struct pci_raw_ops pci_mmcfg = {
.write = pci_mmcfg_write,
};
+
+static __init void pci_mmcfg_insert_resources(void)
+{
+#define PCI_MMCFG_RESOURCE_NAME_LEN 19
+ int i;
+ struct resource *res;
+ char *names;
+ unsigned num_buses;
+
+ res = kcalloc(PCI_MMCFG_RESOURCE_NAME_LEN + sizeof(*res),
+ pci_mmcfg_config_num, GFP_KERNEL);
+
+ if (!res) {
+ printk(KERN_ERR "PCI: Unable to allocate MMCONFIG resources\n");
+ return;
+ }
+
+ names = (void *)&res[pci_mmcfg_config_num];
+ for (i = 0; i < pci_mmcfg_config_num; i++, res++) {
+ num_buses = pci_mmcfg_config[i].end_bus_number -
+ pci_mmcfg_config[i].start_bus_number + 1;
+ res->name = names;
+ snprintf(names, PCI_MMCFG_RESOURCE_NAME_LEN, "PCI MMCONFIG %u",
+ pci_mmcfg_config[i].pci_segment_group_number);
+ res->start = pci_mmcfg_config[i].base_address;
+ res->end = res->start + (num_buses << 20) - 1;
+ res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+ insert_resource(&iomem_resource, res);
+ names += PCI_MMCFG_RESOURCE_NAME_LEN;
+ }
+}
+
/* K8 systems have some devices (typically in the builtin northbridge)
that are only accessible using type1
Normally this can be expressed in the MCFG by not listing them
@@ -187,7 +219,9 @@ static __init void unreachable_devices(void)
}
}
-void __init pci_mmcfg_init(void)
+
+
+void __init pci_mmcfg_init(int type)
{
if ((pci_probe & PCI_PROBE_MMCONF) == 0)
return;
@@ -198,7 +232,9 @@ void __init pci_mmcfg_init(void)
(pci_mmcfg_config[0].base_address == 0))
return;
- if (!e820_all_mapped(pci_mmcfg_config[0].base_address,
+ /* Only do this check when type 1 works. If it doesn't work
+ assume we run on a Mac and always use MCFG */
+ if (type == 1 && !e820_all_mapped(pci_mmcfg_config[0].base_address,
pci_mmcfg_config[0].base_address + MMCONFIG_APER_MIN,
E820_RESERVED)) {
printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %x is not E820-reserved\n",
@@ -212,4 +248,5 @@ void __init pci_mmcfg_init(void)
pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF;
unreachable_devices();
+ pci_mmcfg_insert_resources();
}