diff options
Diffstat (limited to 'arch/i386')
36 files changed, 825 insertions, 591 deletions
diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig index d2703cda61e..bac0da731ee 100644 --- a/arch/i386/Kconfig +++ b/arch/i386/Kconfig @@ -5,7 +5,7 @@ mainmenu "Linux Kernel Configuration" -config X86 +config X86_32 bool default y help @@ -18,6 +18,10 @@ config SEMAPHORE_SLEEPERS bool default y +config X86 + bool + default y + config MMU bool default y @@ -151,304 +155,7 @@ config ES7000_CLUSTERED_APIC default y depends on SMP && X86_ES7000 && MPENTIUMIII -if !X86_ELAN - -choice - prompt "Processor family" - default M686 - -config M386 - bool "386" - ---help--- - This is the processor type of your CPU. This information is used for - optimizing purposes. In order to compile a kernel that can run on - all x86 CPU types (albeit not optimally fast), you can specify - "386" here. - - The kernel will not necessarily run on earlier architectures than - the one you have chosen, e.g. a Pentium optimized kernel will run on - a PPro, but not necessarily on a i486. - - Here are the settings recommended for greatest speed: - - "386" for the AMD/Cyrix/Intel 386DX/DXL/SL/SLC/SX, Cyrix/TI - 486DLC/DLC2, UMC 486SX-S and NexGen Nx586. Only "386" kernels - will run on a 386 class machine. - - "486" for the AMD/Cyrix/IBM/Intel 486DX/DX2/DX4 or - SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or U5S. - - "586" for generic Pentium CPUs lacking the TSC - (time stamp counter) register. - - "Pentium-Classic" for the Intel Pentium. - - "Pentium-MMX" for the Intel Pentium MMX. - - "Pentium-Pro" for the Intel Pentium Pro. - - "Pentium-II" for the Intel Pentium II or pre-Coppermine Celeron. - - "Pentium-III" for the Intel Pentium III or Coppermine Celeron. - - "Pentium-4" for the Intel Pentium 4 or P4-based Celeron. - - "K6" for the AMD K6, K6-II and K6-III (aka K6-3D). - - "Athlon" for the AMD K7 family (Athlon/Duron/Thunderbird). - - "Crusoe" for the Transmeta Crusoe series. - - "Efficeon" for the Transmeta Efficeon series. - - "Winchip-C6" for original IDT Winchip. - - "Winchip-2" for IDT Winchip 2. - - "Winchip-2A" for IDT Winchips with 3dNow! capabilities. - - "GeodeGX1" for Geode GX1 (Cyrix MediaGX). - - "CyrixIII/VIA C3" for VIA Cyrix III or VIA C3. - - "VIA C3-2 for VIA C3-2 "Nehemiah" (model 9 and above). - - If you don't know what to do, choose "386". - -config M486 - bool "486" - help - Select this for a 486 series processor, either Intel or one of the - compatible processors from AMD, Cyrix, IBM, or Intel. Includes DX, - DX2, and DX4 variants; also SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or - U5S. - -config M586 - bool "586/K5/5x86/6x86/6x86MX" - help - Select this for an 586 or 686 series processor such as the AMD K5, - the Cyrix 5x86, 6x86 and 6x86MX. This choice does not - assume the RDTSC (Read Time Stamp Counter) instruction. - -config M586TSC - bool "Pentium-Classic" - help - Select this for a Pentium Classic processor with the RDTSC (Read - Time Stamp Counter) instruction for benchmarking. - -config M586MMX - bool "Pentium-MMX" - help - Select this for a Pentium with the MMX graphics/multimedia - extended instructions. - -config M686 - bool "Pentium-Pro" - help - Select this for Intel Pentium Pro chips. This enables the use of - Pentium Pro extended instructions, and disables the init-time guard - against the f00f bug found in earlier Pentiums. - -config MPENTIUMII - bool "Pentium-II/Celeron(pre-Coppermine)" - help - Select this for Intel chips based on the Pentium-II and - pre-Coppermine Celeron core. This option enables an unaligned - copy optimization, compiles the kernel with optimization flags - tailored for the chip, and applies any applicable Pentium Pro - optimizations. - -config MPENTIUMIII - bool "Pentium-III/Celeron(Coppermine)/Pentium-III Xeon" - help - Select this for Intel chips based on the Pentium-III and - Celeron-Coppermine core. This option enables use of some - extended prefetch instructions in addition to the Pentium II - extensions. - -config MPENTIUMM - bool "Pentium M" - help - Select this for Intel Pentium M (not Pentium-4 M) - notebook chips. - -config MPENTIUM4 - bool "Pentium-4/Celeron(P4-based)/Pentium-4 M/Xeon" - help - Select this for Intel Pentium 4 chips. This includes the - Pentium 4, P4-based Celeron and Xeon, and Pentium-4 M - (not Pentium M) chips. This option enables compile flags - optimized for the chip, uses the correct cache shift, and - applies any applicable Pentium III optimizations. - -config MK6 - bool "K6/K6-II/K6-III" - help - Select this for an AMD K6-family processor. Enables use of - some extended instructions, and passes appropriate optimization - flags to GCC. - -config MK7 - bool "Athlon/Duron/K7" - help - Select this for an AMD Athlon K7-family processor. Enables use of - some extended instructions, and passes appropriate optimization - flags to GCC. - -config MK8 - bool "Opteron/Athlon64/Hammer/K8" - help - Select this for an AMD Opteron or Athlon64 Hammer-family processor. Enables - use of some extended instructions, and passes appropriate optimization - flags to GCC. - -config MCRUSOE - bool "Crusoe" - help - Select this for a Transmeta Crusoe processor. Treats the processor - like a 586 with TSC, and sets some GCC optimization flags (like a - Pentium Pro with no alignment requirements). - -config MEFFICEON - bool "Efficeon" - help - Select this for a Transmeta Efficeon processor. - -config MWINCHIPC6 - bool "Winchip-C6" - help - Select this for an IDT Winchip C6 chip. Linux and GCC - treat this chip as a 586TSC with some extended instructions - and alignment requirements. - -config MWINCHIP2 - bool "Winchip-2" - help - Select this for an IDT Winchip-2. Linux and GCC - treat this chip as a 586TSC with some extended instructions - and alignment requirements. - -config MWINCHIP3D - bool "Winchip-2A/Winchip-3" - help - Select this for an IDT Winchip-2A or 3. Linux and GCC - treat this chip as a 586TSC with some extended instructions - and alignment reqirements. Also enable out of order memory - stores for this CPU, which can increase performance of some - operations. - -config MGEODEGX1 - bool "GeodeGX1" - help - Select this for a Geode GX1 (Cyrix MediaGX) chip. - -config MCYRIXIII - bool "CyrixIII/VIA-C3" - help - Select this for a Cyrix III or C3 chip. Presently Linux and GCC - treat this chip as a generic 586. Whilst the CPU is 686 class, - it lacks the cmov extension which gcc assumes is present when - generating 686 code. - Note that Nehemiah (Model 9) and above will not boot with this - kernel due to them lacking the 3DNow! instructions used in earlier - incarnations of the CPU. - -config MVIAC3_2 - bool "VIA C3-2 (Nehemiah)" - help - Select this for a VIA C3 "Nehemiah". Selecting this enables usage - of SSE and tells gcc to treat the CPU as a 686. - Note, this kernel will not boot on older (pre model 9) C3s. - -endchoice - -config X86_GENERIC - bool "Generic x86 support" - help - Instead of just including optimizations for the selected - x86 variant (e.g. PII, Crusoe or Athlon), include some more - generic optimizations as well. This will make the kernel - perform better on x86 CPUs other than that selected. - - This is really intended for distributors who need more - generic optimizations. - -endif - -# -# Define implied options from the CPU selection here -# -config X86_CMPXCHG - bool - depends on !M386 - default y - -config X86_XADD - bool - depends on !M386 - default y - -config X86_L1_CACHE_SHIFT - int - default "7" if MPENTIUM4 || X86_GENERIC - default "4" if X86_ELAN || M486 || M386 - default "5" if MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCRUSOE || MEFFICEON || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || M586 || MVIAC3_2 || MGEODEGX1 - default "6" if MK7 || MK8 || MPENTIUMM - -config RWSEM_GENERIC_SPINLOCK - bool - depends on M386 - default y - -config RWSEM_XCHGADD_ALGORITHM - bool - depends on !M386 - default y - -config GENERIC_CALIBRATE_DELAY - bool - default y - -config X86_PPRO_FENCE - bool - depends on M686 || M586MMX || M586TSC || M586 || M486 || M386 || MGEODEGX1 - default y - -config X86_F00F_BUG - bool - depends on M586MMX || M586TSC || M586 || M486 || M386 - default y - -config X86_WP_WORKS_OK - bool - depends on !M386 - default y - -config X86_INVLPG - bool - depends on !M386 - default y - -config X86_BSWAP - bool - depends on !M386 - default y - -config X86_POPAD_OK - bool - depends on !M386 - default y - -config X86_ALIGNMENT_16 - bool - depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || X86_ELAN || MK6 || M586MMX || M586TSC || M586 || M486 || MVIAC3_2 || MGEODEGX1 - default y - -config X86_GOOD_APIC - bool - depends on MK7 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || MK8 || MEFFICEON - default y - -config X86_INTEL_USERCOPY - bool - depends on MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M586MMX || X86_GENERIC || MK8 || MK7 || MEFFICEON - default y - -config X86_USE_PPRO_CHECKSUM - bool - depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MK8 || MVIAC3_2 || MEFFICEON - default y - -config X86_USE_3DNOW - bool - depends on MCYRIXIII || MK7 - default y - -config X86_OOSTORE - bool - depends on (MWINCHIP3D || MWINCHIP2 || MWINCHIPC6) && MTRR - default y +source "arch/i386/Kconfig.cpu" config HPET_TIMER bool "HPET Timer Support" @@ -561,11 +268,6 @@ config X86_VISWS_APIC depends on X86_VISWS default y -config X86_TSC - bool - depends on (MWINCHIP3D || MWINCHIP2 || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MGEODEGX1) && !X86_NUMAQ - default y - config X86_MCE bool "Machine Check Exception" depends on !X86_VOYAGER @@ -1340,8 +1042,3 @@ config X86_TRAMPOLINE bool depends on X86_SMP || (X86_VOYAGER && SMP) default y - -config PC - bool - depends on X86 && !EMBEDDED - default y diff --git a/arch/i386/Kconfig.cpu b/arch/i386/Kconfig.cpu new file mode 100644 index 00000000000..53bbb3c008e --- /dev/null +++ b/arch/i386/Kconfig.cpu @@ -0,0 +1,309 @@ +# Put here option for CPU selection and depending optimization +if !X86_ELAN + +choice + prompt "Processor family" + default M686 + +config M386 + bool "386" + ---help--- + This is the processor type of your CPU. This information is used for + optimizing purposes. In order to compile a kernel that can run on + all x86 CPU types (albeit not optimally fast), you can specify + "386" here. + + The kernel will not necessarily run on earlier architectures than + the one you have chosen, e.g. a Pentium optimized kernel will run on + a PPro, but not necessarily on a i486. + + Here are the settings recommended for greatest speed: + - "386" for the AMD/Cyrix/Intel 386DX/DXL/SL/SLC/SX, Cyrix/TI + 486DLC/DLC2, UMC 486SX-S and NexGen Nx586. Only "386" kernels + will run on a 386 class machine. + - "486" for the AMD/Cyrix/IBM/Intel 486DX/DX2/DX4 or + SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or U5S. + - "586" for generic Pentium CPUs lacking the TSC + (time stamp counter) register. + - "Pentium-Classic" for the Intel Pentium. + - "Pentium-MMX" for the Intel Pentium MMX. + - "Pentium-Pro" for the Intel Pentium Pro. + - "Pentium-II" for the Intel Pentium II or pre-Coppermine Celeron. + - "Pentium-III" for the Intel Pentium III or Coppermine Celeron. + - "Pentium-4" for the Intel Pentium 4 or P4-based Celeron. + - "K6" for the AMD K6, K6-II and K6-III (aka K6-3D). + - "Athlon" for the AMD K7 family (Athlon/Duron/Thunderbird). + - "Crusoe" for the Transmeta Crusoe series. + - "Efficeon" for the Transmeta Efficeon series. + - "Winchip-C6" for original IDT Winchip. + - "Winchip-2" for IDT Winchip 2. + - "Winchip-2A" for IDT Winchips with 3dNow! capabilities. + - "GeodeGX1" for Geode GX1 (Cyrix MediaGX). + - "CyrixIII/VIA C3" for VIA Cyrix III or VIA C3. + - "VIA C3-2 for VIA C3-2 "Nehemiah" (model 9 and above). + + If you don't know what to do, choose "386". + +config M486 + bool "486" + help + Select this for a 486 series processor, either Intel or one of the + compatible processors from AMD, Cyrix, IBM, or Intel. Includes DX, + DX2, and DX4 variants; also SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or + U5S. + +config M586 + bool "586/K5/5x86/6x86/6x86MX" + help + Select this for an 586 or 686 series processor such as the AMD K5, + the Cyrix 5x86, 6x86 and 6x86MX. This choice does not + assume the RDTSC (Read Time Stamp Counter) instruction. + +config M586TSC + bool "Pentium-Classic" + help + Select this for a Pentium Classic processor with the RDTSC (Read + Time Stamp Counter) instruction for benchmarking. + +config M586MMX + bool "Pentium-MMX" + help + Select this for a Pentium with the MMX graphics/multimedia + extended instructions. + +config M686 + bool "Pentium-Pro" + help + Select this for Intel Pentium Pro chips. This enables the use of + Pentium Pro extended instructions, and disables the init-time guard + against the f00f bug found in earlier Pentiums. + +config MPENTIUMII + bool "Pentium-II/Celeron(pre-Coppermine)" + help + Select this for Intel chips based on the Pentium-II and + pre-Coppermine Celeron core. This option enables an unaligned + copy optimization, compiles the kernel with optimization flags + tailored for the chip, and applies any applicable Pentium Pro + optimizations. + +config MPENTIUMIII + bool "Pentium-III/Celeron(Coppermine)/Pentium-III Xeon" + help + Select this for Intel chips based on the Pentium-III and + Celeron-Coppermine core. This option enables use of some + extended prefetch instructions in addition to the Pentium II + extensions. + +config MPENTIUMM + bool "Pentium M" + help + Select this for Intel Pentium M (not Pentium-4 M) + notebook chips. + +config MPENTIUM4 + bool "Pentium-4/Celeron(P4-based)/Pentium-4 M/Xeon" + help + Select this for Intel Pentium 4 chips. This includes the + Pentium 4, P4-based Celeron and Xeon, and Pentium-4 M + (not Pentium M) chips. This option enables compile flags + optimized for the chip, uses the correct cache shift, and + applies any applicable Pentium III optimizations. + +config MK6 + bool "K6/K6-II/K6-III" + help + Select this for an AMD K6-family processor. Enables use of + some extended instructions, and passes appropriate optimization + flags to GCC. + +config MK7 + bool "Athlon/Duron/K7" + help + Select this for an AMD Athlon K7-family processor. Enables use of + some extended instructions, and passes appropriate optimization + flags to GCC. + +config MK8 + bool "Opteron/Athlon64/Hammer/K8" + help + Select this for an AMD Opteron or Athlon64 Hammer-family processor. Enables + use of some extended instructions, and passes appropriate optimization + flags to GCC. + +config MCRUSOE + bool "Crusoe" + help + Select this for a Transmeta Crusoe processor. Treats the processor + like a 586 with TSC, and sets some GCC optimization flags (like a + Pentium Pro with no alignment requirements). + +config MEFFICEON + bool "Efficeon" + help + Select this for a Transmeta Efficeon processor. + +config MWINCHIPC6 + bool "Winchip-C6" + help + Select this for an IDT Winchip C6 chip. Linux and GCC + treat this chip as a 586TSC with some extended instructions + and alignment requirements. + +config MWINCHIP2 + bool "Winchip-2" + help + Select this for an IDT Winchip-2. Linux and GCC + treat this chip as a 586TSC with some extended instructions + and alignment requirements. + +config MWINCHIP3D + bool "Winchip-2A/Winchip-3" + help + Select this for an IDT Winchip-2A or 3. Linux and GCC + treat this chip as a 586TSC with some extended instructions + and alignment reqirements. Also enable out of order memory + stores for this CPU, which can increase performance of some + operations. + +config MGEODEGX1 + bool "GeodeGX1" + help + Select this for a Geode GX1 (Cyrix MediaGX) chip. + +config MCYRIXIII + bool "CyrixIII/VIA-C3" + help + Select this for a Cyrix III or C3 chip. Presently Linux and GCC + treat this chip as a generic 586. Whilst the CPU is 686 class, + it lacks the cmov extension which gcc assumes is present when + generating 686 code. + Note that Nehemiah (Model 9) and above will not boot with this + kernel due to them lacking the 3DNow! instructions used in earlier + incarnations of the CPU. + +config MVIAC3_2 + bool "VIA C3-2 (Nehemiah)" + help + Select this for a VIA C3 "Nehemiah". Selecting this enables usage + of SSE and tells gcc to treat the CPU as a 686. + Note, this kernel will not boot on older (pre model 9) C3s. + +endchoice + +config X86_GENERIC + bool "Generic x86 support" + help + Instead of just including optimizations for the selected + x86 variant (e.g. PII, Crusoe or Athlon), include some more + generic optimizations as well. This will make the kernel + perform better on x86 CPUs other than that selected. + + This is really intended for distributors who need more + generic optimizations. + +endif + +# +# Define implied options from the CPU selection here +# +config X86_CMPXCHG + bool + depends on !M386 + default y + +config X86_XADD + bool + depends on !M386 + default y + +config X86_L1_CACHE_SHIFT + int + default "7" if MPENTIUM4 || X86_GENERIC + default "4" if X86_ELAN || M486 || M386 + default "5" if MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCRUSOE || MEFFICEON || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || M586 || MVIAC3_2 || MGEODEGX1 + default "6" if MK7 || MK8 || MPENTIUMM + +config RWSEM_GENERIC_SPINLOCK + bool + depends on M386 + default y + +config RWSEM_XCHGADD_ALGORITHM + bool + depends on !M386 + default y + +config GENERIC_CALIBRATE_DELAY + bool + default y + +config X86_PPRO_FENCE + bool + depends on M686 || M586MMX || M586TSC || M586 || M486 || M386 || MGEODEGX1 + default y + +config X86_F00F_BUG + bool + depends on M586MMX || M586TSC || M586 || M486 || M386 + default y + +config X86_WP_WORKS_OK + bool + depends on !M386 + default y + +config X86_INVLPG + bool + depends on !M386 + default y + +config X86_BSWAP + bool + depends on !M386 + default y + +config X86_POPAD_OK + bool + depends on !M386 + default y + +config X86_CMPXCHG64 + bool + depends on !M386 && !M486 + default y + +config X86_ALIGNMENT_16 + bool + depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || X86_ELAN || MK6 || M586MMX || M586TSC || M586 || M486 || MVIAC3_2 || MGEODEGX1 + default y + +config X86_GOOD_APIC + bool + depends on MK7 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || MK8 || MEFFICEON + default y + +config X86_INTEL_USERCOPY + bool + depends on MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M586MMX || X86_GENERIC || MK8 || MK7 || MEFFICEON + default y + +config X86_USE_PPRO_CHECKSUM + bool + depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MK8 || MVIAC3_2 || MEFFICEON + default y + +config X86_USE_3DNOW + bool + depends on MCYRIXIII || MK7 + default y + +config X86_OOSTORE + bool + depends on (MWINCHIP3D || MWINCHIP2 || MWINCHIPC6) && MTRR + default y + +config X86_TSC + bool + depends on (MWINCHIP3D || MWINCHIP2 || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MGEODEGX1) && !X86_NUMAQ + default y diff --git a/arch/i386/Makefile b/arch/i386/Makefile index 09951990a62..d121ea18460 100644 --- a/arch/i386/Makefile +++ b/arch/i386/Makefile @@ -34,35 +34,8 @@ CFLAGS += -pipe -msoft-float # prevent gcc from keeping the stack 16 byte aligned CFLAGS += $(call cc-option,-mpreferred-stack-boundary=2) -align := $(cc-option-align) -cflags-$(CONFIG_M386) += -march=i386 -cflags-$(CONFIG_M486) += -march=i486 -cflags-$(CONFIG_M586) += -march=i586 -cflags-$(CONFIG_M586TSC) += -march=i586 -cflags-$(CONFIG_M586MMX) += $(call cc-option,-march=pentium-mmx,-march=i586) -cflags-$(CONFIG_M686) += -march=i686 -cflags-$(CONFIG_MPENTIUMII) += -march=i686 $(call cc-option,-mtune=pentium2) -cflags-$(CONFIG_MPENTIUMIII) += -march=i686 $(call cc-option,-mtune=pentium3) -cflags-$(CONFIG_MPENTIUMM) += -march=i686 $(call cc-option,-mtune=pentium3) -cflags-$(CONFIG_MPENTIUM4) += -march=i686 $(call cc-option,-mtune=pentium4) -cflags-$(CONFIG_MK6) += -march=k6 -# Please note, that patches that add -march=athlon-xp and friends are pointless. -# They make zero difference whatsosever to performance at this time. -cflags-$(CONFIG_MK7) += $(call cc-option,-march=athlon,-march=i686 $(align)-functions=4) -cflags-$(CONFIG_MK8) += $(call cc-option,-march=k8,$(call cc-option,-march=athlon,-march=i686 $(align)-functions=4)) -cflags-$(CONFIG_MCRUSOE) += -march=i686 $(align)-functions=0 $(align)-jumps=0 $(align)-loops=0 -cflags-$(CONFIG_MEFFICEON) += -march=i686 $(call cc-option,-mtune=pentium3) $(align)-functions=0 $(align)-jumps=0 $(align)-loops=0 -cflags-$(CONFIG_MWINCHIPC6) += $(call cc-option,-march=winchip-c6,-march=i586) -cflags-$(CONFIG_MWINCHIP2) += $(call cc-option,-march=winchip2,-march=i586) -cflags-$(CONFIG_MWINCHIP3D) += $(call cc-option,-march=winchip2,-march=i586) -cflags-$(CONFIG_MCYRIXIII) += $(call cc-option,-march=c3,-march=i486) $(align)-functions=0 $(align)-jumps=0 $(align)-loops=0 -cflags-$(CONFIG_MVIAC3_2) += $(call cc-option,-march=c3-2,-march=i686) - -# AMD Elan support -cflags-$(CONFIG_X86_ELAN) += -march=i486 - -# Geode GX1 support -cflags-$(CONFIG_MGEODEGX1) += $(call cc-option,-march=pentium-mmx,-march=i486) +# CPU-specific tuning. Anything which can be shared with UML should go here. +include $(srctree)/arch/i386/Makefile.cpu # -mregparm=3 works ok on gcc-3.0 and later # diff --git a/arch/i386/Makefile.cpu b/arch/i386/Makefile.cpu new file mode 100644 index 00000000000..8e51456df23 --- /dev/null +++ b/arch/i386/Makefile.cpu @@ -0,0 +1,41 @@ +# CPU tuning section - shared with UML. +# Must change only cflags-y (or [yn]), not CFLAGS! That makes a difference for UML. + +#-mtune exists since gcc 3.4, and some -mcpu flavors didn't exist in gcc 2.95. +HAS_MTUNE := $(call cc-option-yn, -mtune=i386) +ifeq ($(HAS_MTUNE),y) +tune = $(call cc-option,-mtune=$(1),) +else +tune = $(call cc-option,-mcpu=$(1),) +endif + +align := $(cc-option-align) +cflags-$(CONFIG_M386) += -march=i386 +cflags-$(CONFIG_M486) += -march=i486 +cflags-$(CONFIG_M586) += -march=i586 +cflags-$(CONFIG_M586TSC) += -march=i586 +cflags-$(CONFIG_M586MMX) += $(call cc-option,-march=pentium-mmx,-march=i586) +cflags-$(CONFIG_M686) += -march=i686 +cflags-$(CONFIG_MPENTIUMII) += -march=i686 $(call tune,pentium2) +cflags-$(CONFIG_MPENTIUMIII) += -march=i686 $(call tune,pentium3) +cflags-$(CONFIG_MPENTIUMM) += -march=i686 $(call tune,pentium3) +cflags-$(CONFIG_MPENTIUM4) += -march=i686 $(call tune,pentium4) +cflags-$(CONFIG_MK6) += -march=k6 +# Please note, that patches that add -march=athlon-xp and friends are pointless. +# They make zero difference whatsosever to performance at this time. +cflags-$(CONFIG_MK7) += $(call cc-option,-march=athlon,-march=i686 $(align)-functions=4) +cflags-$(CONFIG_MK8) += $(call cc-option,-march=k8,$(call cc-option,-march=athlon,-march=i686 $(align)-functions=4)) +cflags-$(CONFIG_MCRUSOE) += -march=i686 $(align)-functions=0 $(align)-jumps=0 $(align)-loops=0 +cflags-$(CONFIG_MEFFICEON) += -march=i686 $(call tune,pentium3) $(align)-functions=0 $(align)-jumps=0 $(align)-loops=0 +cflags-$(CONFIG_MWINCHIPC6) += $(call cc-option,-march=winchip-c6,-march=i586) +cflags-$(CONFIG_MWINCHIP2) += $(call cc-option,-march=winchip2,-march=i586) +cflags-$(CONFIG_MWINCHIP3D) += $(call cc-option,-march=winchip2,-march=i586) +cflags-$(CONFIG_MCYRIXIII) += $(call cc-option,-march=c3,-march=i486) $(align)-functions=0 $(align)-jumps=0 $(align)-loops=0 +cflags-$(CONFIG_MVIAC3_2) += $(call cc-option,-march=c3-2,-march=i686) + +# AMD Elan support +cflags-$(CONFIG_X86_ELAN) += -march=i486 + +# Geode GX1 support +cflags-$(CONFIG_MGEODEGX1) += $(call cc-option,-march=pentium-mmx,-march=i486) + diff --git a/arch/i386/kernel/apic.c b/arch/i386/kernel/apic.c index 5546ddebec3..7c724ffa08b 100644 --- a/arch/i386/kernel/apic.c +++ b/arch/i386/kernel/apic.c @@ -1046,10 +1046,11 @@ static unsigned int calibration_result; void __init setup_boot_APIC_clock(void) { + unsigned long flags; apic_printk(APIC_VERBOSE, "Using local APIC timer interrupts.\n"); using_apic_timer = 1; - local_irq_disable(); + local_irq_save(flags); calibration_result = calibrate_APIC_clock(); /* @@ -1057,7 +1058,7 @@ void __init setup_boot_APIC_clock(void) */ setup_APIC_timer(calibration_result); - local_irq_enable(); + local_irq_restore(flags); } void __devinit setup_secondary_APIC_clock(void) diff --git a/arch/i386/kernel/apm.c b/arch/i386/kernel/apm.c index d7811c4e8b5..d2ef0c2aa93 100644 --- a/arch/i386/kernel/apm.c +++ b/arch/i386/kernel/apm.c @@ -597,12 +597,14 @@ static u8 apm_bios_call(u32 func, u32 ebx_in, u32 ecx_in, cpumask_t cpus; int cpu; struct desc_struct save_desc_40; + struct desc_struct *gdt; cpus = apm_save_cpus(); cpu = get_cpu(); - save_desc_40 = per_cpu(cpu_gdt_table, cpu)[0x40 / 8]; - per_cpu(cpu_gdt_table, cpu)[0x40 / 8] = bad_bios_desc; + gdt = get_cpu_gdt_table(cpu); + save_desc_40 = gdt[0x40 / 8]; + gdt[0x40 / 8] = bad_bios_desc; local_save_flags(flags); APM_DO_CLI; @@ -610,7 +612,7 @@ static u8 apm_bios_call(u32 func, u32 ebx_in, u32 ecx_in, apm_bios_call_asm(func, ebx_in, ecx_in, eax, ebx, ecx, edx, esi); APM_DO_RESTORE_SEGS; local_irq_restore(flags); - per_cpu(cpu_gdt_table, cpu)[0x40 / 8] = save_desc_40; + gdt[0x40 / 8] = save_desc_40; put_cpu(); apm_restore_cpus(cpus); @@ -639,13 +641,14 @@ static u8 apm_bios_call_simple(u32 func, u32 ebx_in, u32 ecx_in, u32 *eax) cpumask_t cpus; int cpu; struct desc_struct save_desc_40; - + struct desc_struct *gdt; cpus = apm_save_cpus(); cpu = get_cpu(); - save_desc_40 = per_cpu(cpu_gdt_table, cpu)[0x40 / 8]; - per_cpu(cpu_gdt_table, cpu)[0x40 / 8] = bad_bios_desc; + gdt = get_cpu_gdt_table(cpu); + save_desc_40 = gdt[0x40 / 8]; + gdt[0x40 / 8] = bad_bios_desc; local_save_flags(flags); APM_DO_CLI; @@ -653,7 +656,7 @@ static u8 apm_bios_call_simple(u32 func, u32 ebx_in, u32 ecx_in, u32 *eax) error = apm_bios_call_simple_asm(func, ebx_in, ecx_in, eax); APM_DO_RESTORE_SEGS; local_irq_restore(flags); - __get_cpu_var(cpu_gdt_table)[0x40 / 8] = save_desc_40; + gdt[0x40 / 8] = save_desc_40; put_cpu(); apm_restore_cpus(cpus); return error; @@ -2295,35 +2298,36 @@ static int __init apm_init(void) apm_bios_entry.segment = APM_CS; for (i = 0; i < NR_CPUS; i++) { - set_base(per_cpu(cpu_gdt_table, i)[APM_CS >> 3], + struct desc_struct *gdt = get_cpu_gdt_table(i); + set_base(gdt[APM_CS >> 3], __va((unsigned long)apm_info.bios.cseg << 4)); - set_base(per_cpu(cpu_gdt_table, i)[APM_CS_16 >> 3], + set_base(gdt[APM_CS_16 >> 3], __va((unsigned long)apm_info.bios.cseg_16 << 4)); - set_base(per_cpu(cpu_gdt_table, i)[APM_DS >> 3], + set_base(gdt[APM_DS >> 3], __va((unsigned long)apm_info.bios.dseg << 4)); #ifndef APM_RELAX_SEGMENTS if (apm_info.bios.version == 0x100) { #endif /* For ASUS motherboard, Award BIOS rev 110 (and others?) */ - _set_limit((char *)&per_cpu(cpu_gdt_table, i)[APM_CS >> 3], 64 * 1024 - 1); + _set_limit((char *)&gdt[APM_CS >> 3], 64 * 1024 - 1); /* For some unknown machine. */ - _set_limit((char *)&per_cpu(cpu_gdt_table, i)[APM_CS_16 >> 3], 64 * 1024 - 1); + _set_limit((char *)&gdt[APM_CS_16 >> 3], 64 * 1024 - 1); /* For the DEC Hinote Ultra CT475 (and others?) */ - _set_limit((char *)&per_cpu(cpu_gdt_table, i)[APM_DS >> 3], 64 * 1024 - 1); + _set_limit((char *)&gdt[APM_DS >> 3], 64 * 1024 - 1); #ifndef APM_RELAX_SEGMENTS } else { - _set_limit((char *)&per_cpu(cpu_gdt_table, i)[APM_CS >> 3], + _set_limit((char *)&gdt[APM_CS >> 3], (apm_info.bios.cseg_len - 1) & 0xffff); - _set_limit((char *)&per_cpu(cpu_gdt_table, i)[APM_CS_16 >> 3], + _set_limit((char *)&gdt[APM_CS_16 >> 3], (apm_info.bios.cseg_16_len - 1) & 0xffff); - _set_limit((char *)&per_cpu(cpu_gdt_table, i)[APM_DS >> 3], + _set_limit((char *)&gdt[APM_DS >> 3], (apm_info.bios.dseg_len - 1) & 0xffff); /* workaround for broken BIOSes */ if (apm_info.bios.cseg_len <= apm_info.bios.offset) - _set_limit((char *)&per_cpu(cpu_gdt_table, i)[APM_CS >> 3], 64 * 1024 -1); + _set_limit((char *)&gdt[APM_CS >> 3], 64 * 1024 -1); if (apm_info.bios.dseg_len <= 0x40) { /* 0x40 * 4kB == 64kB */ /* for the BIOS that assumes granularity = 1 */ - per_cpu(cpu_gdt_table, i)[APM_DS >> 3].b |= 0x800000; + gdt[APM_DS >> 3].b |= 0x800000; printk(KERN_NOTICE "apm: we set the granularity of dseg.\n"); } } diff --git a/arch/i386/kernel/cpu/common.c b/arch/i386/kernel/cpu/common.c index 9ad43be9a01..74145a33cb0 100644 --- a/arch/i386/kernel/cpu/common.c +++ b/arch/i386/kernel/cpu/common.c @@ -573,6 +573,7 @@ void __devinit cpu_init(void) int cpu = smp_processor_id(); struct tss_struct * t = &per_cpu(init_tss, cpu); struct thread_struct *thread = ¤t->thread; + struct desc_struct *gdt = get_cpu_gdt_table(cpu); __u32 stk16_off = (__u32)&per_cpu(cpu_16bit_stack, cpu); if (cpu_test_and_set(cpu, cpu_initialized)) { @@ -594,24 +595,16 @@ void __devinit cpu_init(void) * Initialize the per-CPU GDT with the boot GDT, * and set up the GDT descriptor: */ - memcpy(&per_cpu(cpu_gdt_table, cpu), cpu_gdt_table, - GDT_SIZE); + memcpy(gdt, cpu_gdt_table, GDT_SIZE); /* Set up GDT entry for 16bit stack */ - *(__u64 *)&(per_cpu(cpu_gdt_table, cpu)[GDT_ENTRY_ESPFIX_SS]) |= + *(__u64 *)(&gdt[GDT_ENTRY_ESPFIX_SS]) |= ((((__u64)stk16_off) << 16) & 0x000000ffffff0000ULL) | ((((__u64)stk16_off) << 32) & 0xff00000000000000ULL) | (CPU_16BIT_STACK_SIZE - 1); cpu_gdt_descr[cpu].size = GDT_SIZE - 1; - cpu_gdt_descr[cpu].address = - (unsigned long)&per_cpu(cpu_gdt_table, cpu); - - /* - * Set up the per-thread TLS descriptor cache: - */ - memcpy(thread->tls_array, &per_cpu(cpu_gdt_table, cpu), - GDT_ENTRY_TLS_ENTRIES * 8); + cpu_gdt_descr[cpu].address = (unsigned long)gdt; load_gdt(&cpu_gdt_descr[cpu]); load_idt(&idt_descr); diff --git a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c index 822c8ce9d1f..caa9f771134 100644 --- a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -32,6 +32,7 @@ #include <linux/proc_fs.h> #include <linux/seq_file.h> #include <linux/compiler.h> +#include <linux/sched.h> /* current */ #include <asm/io.h> #include <asm/delay.h> #include <asm/uaccess.h> diff --git a/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c b/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c index aa622d52c6e..270f2188d68 100644 --- a/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c +++ b/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c @@ -28,6 +28,7 @@ #include <linux/cpufreq.h> #include <linux/slab.h> #include <linux/cpumask.h> +#include <linux/sched.h> /* current / set_cpus_allowed() */ #include <asm/processor.h> #include <asm/msr.h> diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c index 58ca98fdc2c..2d5c9adba0c 100644 --- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c @@ -32,6 +32,7 @@ #include <linux/slab.h> #include <linux/string.h> #include <linux/cpumask.h> +#include <linux/sched.h> /* for current / set_cpus_allowed() */ #include <asm/msr.h> #include <asm/io.h> diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c index c397b622043..1465974256c 100644 --- a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c +++ b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c @@ -22,6 +22,7 @@ #include <linux/init.h> #include <linux/cpufreq.h> #include <linux/config.h> +#include <linux/sched.h> /* current */ #include <linux/delay.h> #include <linux/compiler.h> diff --git a/arch/i386/kernel/cpu/intel_cacheinfo.c b/arch/i386/kernel/cpu/intel_cacheinfo.c index 9e0d5f83cb9..4dc42a189ae 100644 --- a/arch/i386/kernel/cpu/intel_cacheinfo.c +++ b/arch/i386/kernel/cpu/intel_cacheinfo.c @@ -3,6 +3,7 @@ * * Changes: * Venkatesh Pallipadi : Adding cache identification through cpuid(4) + * Ashok Raj <ashok.raj@intel.com>: Work with CPU hotplug infrastructure. */ #include <linux/init.h> @@ -10,6 +11,7 @@ #include <linux/device.h> #include <linux/compiler.h> #include <linux/cpu.h> +#include <linux/sched.h> #include <asm/processor.h> #include <asm/smp.h> @@ -28,7 +30,7 @@ struct _cache_table }; /* all the cache descriptor types we care about (no TLB or trace cache entries) */ -static struct _cache_table cache_table[] __devinitdata = +static struct _cache_table cache_table[] __cpuinitdata = { { 0x06, LVL_1_INST, 8 }, /* 4-way set assoc, 32 byte line size */ { 0x08, LVL_1_INST, 16 }, /* 4-way set assoc, 32 byte line size */ @@ -117,10 +119,9 @@ struct _cpuid4_info { cpumask_t shared_cpu_map; }; -#define MAX_CACHE_LEAVES 4 static unsigned short num_cache_leaves; -static int __devinit cpuid4_cache_lookup(int index, struct _cpuid4_info *this_leaf) +static int __cpuinit cpuid4_cache_lookup(int index, struct _cpuid4_info *this_leaf) { unsigned int eax, ebx, ecx, edx; union _cpuid4_leaf_eax cache_eax; @@ -144,23 +145,18 @@ static int __init find_num_cache_leaves(void) { unsigned int eax, ebx, ecx, edx; union _cpuid4_leaf_eax cache_eax; - int i; - int retval; + int i = -1; - retval = MAX_CACHE_LEAVES; - /* Do cpuid(4) loop to find out num_cache_leaves */ - for (i = 0; i < MAX_CACHE_LEAVES; i++) { + do { + ++i; + /* Do cpuid(4) loop to find out num_cache_leaves */ cpuid_count(4, i, &eax, &ebx, &ecx, &edx); cache_eax.full = eax; - if (cache_eax.split.type == CACHE_TYPE_NULL) { - retval = i; - break; - } - } - return retval; + } while (cache_eax.split.type != CACHE_TYPE_NULL); + return i; } -unsigned int __devinit init_intel_cacheinfo(struct cpuinfo_x86 *c) +unsigned int __cpuinit init_intel_cacheinfo(struct cpuinfo_x86 *c) { unsigned int trace = 0, l1i = 0, l1d = 0, l2 = 0, l3 = 0; /* Cache sizes */ unsigned int new_l1d = 0, new_l1i = 0; /* Cache sizes from cpuid(4) */ @@ -284,13 +280,7 @@ unsigned int __devinit init_intel_cacheinfo(struct cpuinfo_x86 *c) if ( l3 ) printk(KERN_INFO "CPU: L3 cache: %dK\n", l3); - /* - * This assumes the L3 cache is shared; it typically lives in - * the northbridge. The L1 caches are included by the L2 - * cache, and so should not be included for the purpose of - * SMP switching weights. - */ - c->x86_cache_size = l2 ? l2 : (l1i+l1d); + c->x86_cache_size = l3 ? l3 : (l2 ? l2 : (l1i+l1d)); } return l2; @@ -301,7 +291,7 @@ static struct _cpuid4_info *cpuid4_info[NR_CPUS]; #define CPUID4_INFO_IDX(x,y) (&((cpuid4_info[x])[y])) #ifdef CONFIG_SMP -static void __devinit cache_shared_cpu_map_setup(unsigned int cpu, int index) +static void __cpuinit cache_shared_cpu_map_setup(unsigned int cpu, int index) { struct _cpuid4_info *this_leaf; unsigned long num_threads_sharing; @@ -334,7 +324,7 @@ static void free_cache_attributes(unsigned int cpu) cpuid4_info[cpu] = NULL; } -static int __devinit detect_cache_attributes(unsigned int cpu) +static int __cpuinit detect_cache_attributes(unsigned int cpu) { struct _cpuid4_info *this_leaf; unsigned long j; @@ -511,7 +501,7 @@ static void cpuid4_cache_sysfs_exit(unsigned int cpu) free_cache_attributes(cpu); } -static int __devinit cpuid4_cache_sysfs_init(unsigned int cpu) +static int __cpuinit cpuid4_cache_sysfs_init(unsigned int cpu) { if (num_cache_leaves == 0) @@ -542,7 +532,7 @@ err_out: } /* Add/Remove cache interface for CPU device */ -static int __devinit cache_add_dev(struct sys_device * sys_dev) +static int __cpuinit cache_add_dev(struct sys_device * sys_dev) { unsigned int cpu = sys_dev->id; unsigned long i, j; @@ -579,7 +569,7 @@ static int __devinit cache_add_dev(struct sys_device * sys_dev) return retval; } -static int __devexit cache_remove_dev(struct sys_device * sys_dev) +static void __cpuexit cache_remove_dev(struct sys_device * sys_dev) { unsigned int cpu = sys_dev->id; unsigned long i; @@ -588,24 +578,49 @@ static int __devexit cache_remove_dev(struct sys_device * sys_dev) kobject_unregister(&(INDEX_KOBJECT_PTR(cpu,i)->kobj)); kobject_unregister(cache_kobject[cpu]); cpuid4_cache_sysfs_exit(cpu); - return 0; + return; +} + +static int __cpuinit cacheinfo_cpu_callback(struct notifier_block *nfb, + unsigned long action, void *hcpu) +{ + unsigned int cpu = (unsigned long)hcpu; + struct sys_device *sys_dev; + + sys_dev = get_cpu_sysdev(cpu); + switch (action) { + case CPU_ONLINE: + cache_add_dev(sys_dev); + break; + case CPU_DEAD: + cache_remove_dev(sys_dev); + break; + } + return NOTIFY_OK; } -static struct sysdev_driver cache_sysdev_driver = { - .add = cache_add_dev, - .remove = __devexit_p(cache_remove_dev), +static struct notifier_block cacheinfo_cpu_notifier = +{ + .notifier_call = cacheinfo_cpu_callback, }; -/* Register/Unregister the cpu_cache driver */ -static int __devinit cache_register_driver(void) +static int __cpuinit cache_sysfs_init(void) { + int i; + if (num_cache_leaves == 0) return 0; - return sysdev_driver_register(&cpu_sysdev_class,&cache_sysdev_driver); + register_cpu_notifier(&cacheinfo_cpu_notifier); + + for_each_online_cpu(i) { + cacheinfo_cpu_callback(&cacheinfo_cpu_notifier, CPU_ONLINE, + (void *)(long)i); + } + + return 0; } -device_initcall(cache_register_driver); +device_initcall(cache_sysfs_init); #endif - diff --git a/arch/i386/kernel/cpu/mcheck/p6.c b/arch/i386/kernel/cpu/mcheck/p6.c index 3c035b8fa3d..979b18bc95c 100644 --- a/arch/i386/kernel/cpu/mcheck/p6.c +++ b/arch/i386/kernel/cpu/mcheck/p6.c @@ -102,11 +102,16 @@ void __devinit intel_p6_mcheck_init(struct cpuinfo_x86 *c) wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff); nr_mce_banks = l & 0xff; - /* Don't enable bank 0 on intel P6 cores, it goes bang quickly. */ - for (i=1; i<nr_mce_banks; i++) { + /* + * Following the example in IA-32 SDM Vol 3: + * - MC0_CTL should not be written + * - Status registers on all banks should be cleared on reset + */ + for (i=1; i<nr_mce_banks; i++) wrmsr (MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff); + + for (i=0; i<nr_mce_banks; i++) wrmsr (MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0); - } set_in_cr4 (X86_CR4_MCE); printk (KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n", diff --git a/arch/i386/kernel/cpu/mtrr/if.c b/arch/i386/kernel/cpu/mtrr/if.c index 1923e0aed26..cf39e205d33 100644 --- a/arch/i386/kernel/cpu/mtrr/if.c +++ b/arch/i386/kernel/cpu/mtrr/if.c @@ -149,60 +149,89 @@ mtrr_write(struct file *file, const char __user *buf, size_t len, loff_t * ppos) return -EINVAL; } -static int -mtrr_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long __arg) +static long +mtrr_ioctl(struct file *file, unsigned int cmd, unsigned long __arg) { - int err; + int err = 0; mtrr_type type; struct mtrr_sentry sentry; struct mtrr_gentry gentry; void __user *arg = (void __user *) __arg; switch (cmd) { + case MTRRIOC_ADD_ENTRY: + case MTRRIOC_SET_ENTRY: + case MTRRIOC_DEL_ENTRY: + case MTRRIOC_KILL_ENTRY: + case MTRRIOC_ADD_PAGE_ENTRY: + case MTRRIOC_SET_PAGE_ENTRY: + case MTRRIOC_DEL_PAGE_ENTRY: + case MTRRIOC_KILL_PAGE_ENTRY: + if (copy_from_user(&sentry, arg, sizeof sentry)) + return -EFAULT; + break; + case MTRRIOC_GET_ENTRY: + case MTRRIOC_GET_PAGE_ENTRY: + if (copy_from_user(&gentry, arg, sizeof gentry)) + return -EFAULT; + break; +#ifdef CONFIG_COMPAT + case MTRRIOC32_ADD_ENTRY: + case MTRRIOC32_SET_ENTRY: + case MTRRIOC32_DEL_ENTRY: + case MTRRIOC32_KILL_ENTRY: + case MTRRIOC32_ADD_PAGE_ENTRY: + case MTRRIOC32_SET_PAGE_ENTRY: + case MTRRIOC32_DEL_PAGE_ENTRY: + case MTRRIOC32_KILL_PAGE_ENTRY: { + struct mtrr_sentry32 __user *s32 = (struct mtrr_sentry32 __user *)__arg; + err = get_user(sentry.base, &s32->base); + err |= get_user(sentry.size, &s32->size); + err |= get_user(sentry.type, &s32->type); + if (err) + return err; + break; + } + case MTRRIOC32_GET_ENTRY: + case MTRRIOC32_GET_PAGE_ENTRY: { + struct mtrr_gentry32 __user *g32 = (struct mtrr_gentry32 __user *)__arg; + err = get_user(gentry.regnum, &g32->regnum); + err |= get_user(gentry.base, &g32->base); + err |= get_user(gentry.size, &g32->size); + err |= get_user(gentry.type, &g32->type); + if (err) + return err; + break; + } +#endif + } + + switch (cmd) { default: return -ENOTTY; case MTRRIOC_ADD_ENTRY: if (!capable(CAP_SYS_ADMIN)) return -EPERM; - if (copy_from_user(&sentry, arg, sizeof sentry)) - return -EFAULT; err = mtrr_file_add(sentry.base, sentry.size, sentry.type, 1, file, 0); - if (err < 0) - return err; break; case MTRRIOC_SET_ENTRY: if (!capable(CAP_SYS_ADMIN)) return -EPERM; - if (copy_from_user(&sentry, arg, sizeof sentry)) - return -EFAULT; err = mtrr_add(sentry.base, sentry.size, sentry.type, 0); - if (err < 0) - return err; break; case MTRRIOC_DEL_ENTRY: if (!capable(CAP_SYS_ADMIN)) return -EPERM; - if (copy_from_user(&sentry, arg, sizeof sentry)) - return -EFAULT; err = mtrr_file_del(sentry.base, sentry.size, file, 0); - if (err < 0) - return err; break; case MTRRIOC_KILL_ENTRY: if (!capable(CAP_SYS_ADMIN)) return -EPERM; - if (copy_from_user(&sentry, arg, sizeof sentry)) - return -EFAULT; err = mtrr_del(-1, sentry.base, sentry.size); - if (err < 0) - return err; break; case MTRRIOC_GET_ENTRY: - if (copy_from_user(&gentry, arg, sizeof gentry)) - return -EFAULT; if (gentry.regnum >= num_var_ranges) return -EINVAL; mtrr_if->get(gentry.regnum, &gentry.base, &gentry.size, &type); @@ -217,60 +246,59 @@ mtrr_ioctl(struct inode *inode, struct file *file, gentry.type = type; } - if (copy_to_user(arg, &gentry, sizeof gentry)) - return -EFAULT; break; case MTRRIOC_ADD_PAGE_ENTRY: if (!capable(CAP_SYS_ADMIN)) return -EPERM; - if (copy_from_user(&sentry, arg, sizeof sentry)) - return -EFAULT; err = mtrr_file_add(sentry.base, sentry.size, sentry.type, 1, file, 1); - if (err < 0) - return err; break; case MTRRIOC_SET_PAGE_ENTRY: if (!capable(CAP_SYS_ADMIN)) return -EPERM; - if (copy_from_user(&sentry, arg, sizeof sentry)) - return -EFAULT; err = mtrr_add_page(sentry.base, sentry.size, sentry.type, 0); - if (err < 0) - return err; break; case MTRRIOC_DEL_PAGE_ENTRY: if (!capable(CAP_SYS_ADMIN)) return -EPERM; - if (copy_from_user(&sentry, arg, sizeof sentry)) - return -EFAULT; err = mtrr_file_del(sentry.base, sentry.size, file, 1); - if (err < 0) - return err; break; case MTRRIOC_KILL_PAGE_ENTRY: if (!capable(CAP_SYS_ADMIN)) return -EPERM; - if (copy_from_user(&sentry, arg, sizeof sentry)) - return -EFAULT; err = mtrr_del_page(-1, sentry.base, sentry.size); - if (err < 0) - return err; break; case MTRRIOC_GET_PAGE_ENTRY: - if (copy_from_user(&gentry, arg, sizeof gentry)) - return -EFAULT; if (gentry.regnum >= num_var_ranges) return -EINVAL; mtrr_if->get(gentry.regnum, &gentry.base, &gentry.size, &type); gentry.type = type; + break; + } + + if (err) + return err; + switch(cmd) { + case MTRRIOC_GET_ENTRY: + case MTRRIOC_GET_PAGE_ENTRY: if (copy_to_user(arg, &gentry, sizeof gentry)) - return -EFAULT; + err = -EFAULT; + break; +#ifdef CONFIG_COMPAT + case MTRRIOC32_GET_ENTRY: + case MTRRIOC32_GET_PAGE_ENTRY: { + struct mtrr_gentry32 __user *g32 = (struct mtrr_gentry32 __user *)__arg; + err = put_user(gentry.base, &g32->base); + err |= put_user(gentry.size, &g32->size); + err |= put_user(gentry.regnum, &g32->regnum); + err |= put_user(gentry.type, &g32->type); break; } - return 0; +#endif + } + return err; } static int @@ -310,7 +338,8 @@ static struct file_operations mtrr_fops = { .read = seq_read, .llseek = seq_lseek, .write = mtrr_write, - .ioctl = mtrr_ioctl, + .unlocked_ioctl = mtrr_ioctl, + .compat_ioctl = mtrr_ioctl, .release = mtrr_close, }; diff --git a/arch/i386/kernel/cpu/proc.c b/arch/i386/kernel/cpu/proc.c index 8bd77d948a8..41b871ecf4b 100644 --- a/arch/i386/kernel/cpu/proc.c +++ b/arch/i386/kernel/cpu/proc.c @@ -44,7 +44,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, /* Intel-defined (#2) */ - "pni", NULL, NULL, "monitor", "ds_cpl", NULL, NULL, "est", + "pni", NULL, NULL, "monitor", "ds_cpl", "vmx", NULL, "est", "tm2", NULL, "cid", NULL, NULL, "cx16", "xtpr", NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, diff --git a/arch/i386/kernel/crash.c b/arch/i386/kernel/crash.c index 0248e084017..af809ccf5fb 100644 --- a/arch/i386/kernel/crash.c +++ b/arch/i386/kernel/crash.c @@ -21,7 +21,6 @@ #include <asm/hardirq.h> #include <asm/nmi.h> #include <asm/hw_irq.h> -#include <asm/apic.h> #include <mach_ipi.h> @@ -148,7 +147,6 @@ static int crash_nmi_callback(struct pt_regs *regs, int cpu) regs = &fixed_regs; } crash_save_this_cpu(regs, cpu); - disable_local_APIC(); atomic_dec(&waiting_for_crash_ipi); /* Assume hlt works */ halt(); @@ -188,7 +186,6 @@ static void nmi_shootdown_cpus(void) } /* Leave the nmi callback set */ - disable_local_APIC(); } #else static void nmi_shootdown_cpus(void) @@ -213,9 +210,5 @@ void machine_crash_shutdown(struct pt_regs *regs) /* Make a note of crashing cpu. Will be used in NMI callback.*/ crashing_cpu = smp_processor_id(); nmi_shootdown_cpus(); - lapic_shutdown(); -#if defined(CONFIG_X86_IO_APIC) - disable_IO_APIC(); -#endif crash_save_self(regs); } diff --git a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c index fb3991e8229..cc5d7ac5b2e 100644 --- a/arch/i386/kernel/io_apic.c +++ b/arch/i386/kernel/io_apic.c @@ -46,6 +46,9 @@ int (*ioapic_renumber_irq)(int ioapic, int irq); atomic_t irq_mis_count; +/* Where if anywhere is the i8259 connect in external int mode */ +static struct { int pin, apic; } ioapic_i8259 = { -1, -1 }; + static DEFINE_SPINLOCK(ioapic_lock); /* @@ -738,7 +741,7 @@ static int find_irq_entry(int apic, int pin, int type) /* * Find the pin to which IRQ[irq] (ISA) is connected */ -static int find_isa_irq_pin(int irq, int type) +static int __init find_isa_irq_pin(int irq, int type) { int i; @@ -758,6 +761,33 @@ static int find_isa_irq_pin(int irq, int type) return -1; } +static int __init find_isa_irq_apic(int irq, int type) +{ + int i; + + for (i = 0; i < mp_irq_entries; i++) { + int lbus = mp_irqs[i].mpc_srcbus; + + if ((mp_bus_id_to_type[lbus] == MP_BUS_ISA || + mp_bus_id_to_type[lbus] == MP_BUS_EISA || + mp_bus_id_to_type[lbus] == MP_BUS_MCA || + mp_bus_id_to_type[lbus] == MP_BUS_NEC98 + ) && + (mp_irqs[i].mpc_irqtype == type) && + (mp_irqs[i].mpc_srcbusirq == irq)) + break; + } + if (i < mp_irq_entries) { + int apic; + for(apic = 0; apic < nr_ioapics; apic++) { + if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic) + return apic; + } + } + + return -1; +} + /* * Find a specific PCI IRQ entry. * Not an __init, possibly needed by modules @@ -1253,7 +1283,7 @@ static void __init setup_IO_APIC_irqs(void) /* * Set up the 8259A-master output pin: */ -static void __init setup_ExtINT_IRQ0_pin(unsigned int pin, int vector) +static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, int vector) { struct IO_APIC_route_entry entry; unsigned long flags; @@ -1287,8 +1317,8 @@ static void __init setup_ExtINT_IRQ0_pin(unsigned int pin, int vector) * Add it to the IO-APIC irq-routing table: */ spin_lock_irqsave(&ioapic_lock, flags); - io_apic_write(0, 0x11+2*pin, *(((int *)&entry)+1)); - io_apic_write(0, 0x10+2*pin, *(((int *)&entry)+0)); + io_apic_write(apic, 0x11+2*pin, *(((int *)&entry)+1)); + io_apic_write(apic, 0x10+2*pin, *(((int *)&entry)+0)); spin_unlock_irqrestore(&ioapic_lock, flags); enable_8259A_irq(0); @@ -1595,7 +1625,8 @@ void /*__init*/ print_PIC(void) static void __init enable_IO_APIC(void) { union IO_APIC_reg_01 reg_01; - int i; + int i8259_apic, i8259_pin; + int i, apic; unsigned long flags; for (i = 0; i < PIN_MAP_SIZE; i++) { @@ -1609,11 +1640,52 @@ static void __init enable_IO_APIC(void) /* * The number of IO-APIC IRQ registers (== #pins): */ - for (i = 0; i < nr_ioapics; i++) { + for (apic = 0; apic < nr_ioapics; apic++) { spin_lock_irqsave(&ioapic_lock, flags); - reg_01.raw = io_apic_read(i, 1); + reg_01.raw = io_apic_read(apic, 1); spin_unlock_irqrestore(&ioapic_lock, flags); - nr_ioapic_registers[i] = reg_01.bits.entries+1; + nr_ioapic_registers[apic] = reg_01.bits.entries+1; + } + for(apic = 0; apic < nr_ioapics; apic++) { + int pin; + /* See if any of the pins is in ExtINT mode */ + for(pin = 0; pin < nr_ioapic_registers[i]; pin++) { + struct IO_APIC_route_entry entry; + spin_lock_irqsave(&ioapic_lock, flags); + *(((int *)&entry) + 0) = io_apic_read(apic, 0x10 + 2 * pin); + *(((int *)&entry) + 1) = io_apic_read(apic, 0x11 + 2 * pin); + spin_unlock_irqrestore(&ioapic_lock, flags); + + + /* If the interrupt line is enabled and in ExtInt mode + * I have found the pin where the i8259 is connected. + */ + if ((entry.mask == 0) && (entry.delivery_mode == dest_ExtINT)) { + ioapic_i8259.apic = apic; + ioapic_i8259.pin = pin; + goto found_i8259; + } + } + } + found_i8259: + /* Look to see what if the MP table has reported the ExtINT */ + /* If we could not find the appropriate pin by looking at the ioapic + * the i8259 probably is not connected the ioapic but give the + * mptable a chance anyway. + */ + i8259_pin = find_isa_irq_pin(0, mp_ExtINT); + i8259_apic = find_isa_irq_apic(0, mp_ExtINT); + /* Trust the MP table if nothing is setup in the hardware */ + if ((ioapic_i8259.pin == -1) && (i8259_pin >= 0)) { + printk(KERN_WARNING "ExtINT not setup in hardware but reported by MP table\n"); + ioapic_i8259.pin = i8259_pin; + ioapic_i8259.apic = i8259_apic; + } + /* Complain if the MP table and the hardware disagree */ + if (((ioapic_i8259.apic != i8259_apic) || (ioapic_i8259.pin != i8259_pin)) && + (i8259_pin >= 0) && (ioapic_i8259.pin >= 0)) + { + printk(KERN_WARNING "ExtINT in hardware and MP table differ\n"); } /* @@ -1627,7 +1699,6 @@ static void __init enable_IO_APIC(void) */ void disable_IO_APIC(void) { - int pin; /* * Clear the IO-APIC before rebooting: */ @@ -1638,8 +1709,7 @@ void disable_IO_APIC(void) * Put that IOAPIC in virtual wire mode * so legacy interrupts can be delivered. */ - pin = find_isa_irq_pin(0, mp_ExtINT); - if (pin != -1) { + if (ioapic_i8259.pin != -1) { struct IO_APIC_route_entry entry; unsigned long flags; @@ -1650,7 +1720,7 @@ void disable_IO_APIC(void) entry.polarity = 0; /* High */ entry.delivery_status = 0; entry.dest_mode = 0; /* Physical */ - entry.delivery_mode = 7; /* ExtInt */ + entry.delivery_mode = dest_ExtINT; /* ExtInt */ entry.vector = 0; entry.dest.physical.physical_dest = 0; @@ -1659,11 +1729,13 @@ void disable_IO_APIC(void) * Add it to the IO-APIC irq-routing table: */ spin_lock_irqsave(&ioapic_lock, flags); - io_apic_write(0, 0x11+2*pin, *(((int *)&entry)+1)); - io_apic_write(0, 0x10+2*pin, *(((int *)&entry)+0)); + io_apic_write(ioapic_i8259.apic, 0x11+2*ioapic_i8259.pin, + *(((int *)&entry)+1)); + io_apic_write(ioapic_i8259.apic, 0x10+2*ioapic_i8259.pin, + *(((int *)&entry)+0)); spin_unlock_irqrestore(&ioapic_lock, flags); } - disconnect_bsp_APIC(pin != -1); + disconnect_bsp_APIC(ioapic_i8259.pin != -1); } /* @@ -2113,20 +2185,21 @@ static void setup_nmi (void) */ static inline void unlock_ExtINT_logic(void) { - int pin, i; + int apic, pin, i; struct IO_APIC_route_entry entry0, entry1; unsigned char save_control, save_freq_select; unsigned long flags; - pin = find_isa_irq_pin(8, mp_INT); + pin = find_isa_irq_pin(8, mp_INT); + apic = find_isa_irq_apic(8, mp_INT); if (pin == -1) return; spin_lock_irqsave(&ioapic_lock, flags); - *(((int *)&entry0) + 1) = io_apic_read(0, 0x11 + 2 * pin); - *(((int *)&entry0) + 0) = io_apic_read(0, 0x10 + 2 * pin); + *(((int *)&entry0) + 1) = io_apic_read(apic, 0x11 + 2 * pin); + *(((int *)&entry0) + 0) = io_apic_read(apic, 0x10 + 2 * pin); spin_unlock_irqrestore(&ioapic_lock, flags); - clear_IO_APIC_pin(0, pin); + clear_IO_APIC_pin(apic, pin); memset(&entry1, 0, sizeof(entry1)); @@ -2139,8 +2212,8 @@ static inline void unlock_ExtINT_logic(void) entry1.vector = 0; spin_lock_irqsave(&ioapic_lock, flags); - io_apic_write(0, 0x11 + 2 * pin, *(((int *)&entry1) + 1)); - io_apic_write(0, 0x10 + 2 * pin, *(((int *)&entry1) + 0)); + io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry1) + 1)); + io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry1) + 0)); spin_unlock_irqrestore(&ioapic_lock, flags); save_control = CMOS_READ(RTC_CONTROL); @@ -2158,11 +2231,11 @@ static inline void unlock_ExtINT_logic(void) CMOS_WRITE(save_control, RTC_CONTROL); CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT); - clear_IO_APIC_pin(0, pin); + clear_IO_APIC_pin(apic, pin); spin_lock_irqsave(&ioapic_lock, flags); - io_apic_write(0, 0x11 + 2 * pin, *(((int *)&entry0) + 1)); - io_apic_write(0, 0x10 + 2 * pin, *(((int *)&entry0) + 0)); + io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry0) + 1)); + io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry0) + 0)); spin_unlock_irqrestore(&ioapic_lock, flags); } @@ -2174,7 +2247,7 @@ static inline void unlock_ExtINT_logic(void) */ static inline void check_timer(void) { - int pin1, pin2; + int apic1, pin1, apic2, pin2; int vector; /* @@ -2196,10 +2269,13 @@ static inline void check_timer(void) timer_ack = 1; enable_8259A_irq(0); - pin1 = find_isa_irq_pin(0, mp_INT); - pin2 = find_isa_irq_pin(0, mp_ExtINT); + pin1 = find_isa_irq_pin(0, mp_INT); + apic1 = find_isa_irq_apic(0, mp_INT); + pin2 = ioapic_i8259.pin; + apic2 = ioapic_i8259.apic; - printk(KERN_INFO "..TIMER: vector=0x%02X pin1=%d pin2=%d\n", vector, pin1, pin2); + printk(KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n", + vector, apic1, pin1, apic2, pin2); if (pin1 != -1) { /* @@ -2216,8 +2292,9 @@ static inline void check_timer(void) clear_IO_APIC_pin(0, pin1); return; } - clear_IO_APIC_pin(0, pin1); - printk(KERN_ERR "..MP-BIOS bug: 8254 timer not connected to IO-APIC\n"); + clear_IO_APIC_pin(apic1, pin1); + printk(KERN_ERR "..MP-BIOS bug: 8254 timer not connected to " + "IO-APIC\n"); } printk(KERN_INFO "...trying to set up timer (IRQ0) through the 8259A ... "); @@ -2226,13 +2303,13 @@ static inline void check_timer(void) /* * legacy devices should be connected to IO APIC #0 */ - setup_ExtINT_IRQ0_pin(pin2, vector); + setup_ExtINT_IRQ0_pin(apic2, pin2, vector); if (timer_irq_works()) { printk("works.\n"); if (pin1 != -1) - replace_pin_at_irq(0, 0, pin1, 0, pin2); + replace_pin_at_irq(0, apic1, pin1, apic2, pin2); else - add_pin_to_irq(0, 0, pin2); + add_pin_to_irq(0, apic2, pin2); if (nmi_watchdog == NMI_IO_APIC) { setup_nmi(); } @@ -2241,7 +2318,7 @@ static inline void check_timer(void) /* * Cleanup, just in case ... */ - clear_IO_APIC_pin(0, pin2); + clear_IO_APIC_pin(apic2, pin2); } printk(" failed.\n"); diff --git a/arch/i386/kernel/irq.c b/arch/i386/kernel/irq.c index ce66dcc26d9..1a201a93286 100644 --- a/arch/i386/kernel/irq.c +++ b/arch/i386/kernel/irq.c @@ -218,7 +218,7 @@ int show_interrupts(struct seq_file *p, void *v) if (i == 0) { seq_printf(p, " "); - for_each_cpu(j) + for_each_online_cpu(j) seq_printf(p, "CPU%d ",j); seq_putc(p, '\n'); } @@ -232,7 +232,7 @@ int show_interrupts(struct seq_file *p, void *v) #ifndef CONFIG_SMP seq_printf(p, "%10u ", kstat_irqs(i)); #else - for_each_cpu(j) + for_each_online_cpu(j) seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]); #endif seq_printf(p, " %14s", irq_desc[i].handler->typename); @@ -246,12 +246,12 @@ skip: spin_unlock_irqrestore(&irq_desc[i].lock, flags); } else if (i == NR_IRQS) { seq_printf(p, "NMI: "); - for_each_cpu(j) + for_each_online_cpu(j) seq_printf(p, "%10u ", nmi_count(j)); seq_putc(p, '\n'); #ifdef CONFIG_X86_LOCAL_APIC seq_printf(p, "LOC: "); - for_each_cpu(j) + for_each_online_cpu(j) seq_printf(p, "%10u ", per_cpu(irq_stat,j).apic_timer_irqs); seq_putc(p, '\n'); diff --git a/arch/i386/kernel/mpparse.c b/arch/i386/kernel/mpparse.c index 27aabfceb67..8f767d9aa45 100644 --- a/arch/i386/kernel/mpparse.c +++ b/arch/i386/kernel/mpparse.c @@ -69,7 +69,7 @@ unsigned int def_to_bigsmp = 0; /* Processor that is doing the boot up */ unsigned int boot_cpu_physical_apicid = -1U; /* Internal processor count */ -static unsigned int __initdata num_processors; +static unsigned int __devinitdata num_processors; /* Bitmask of physically existing CPUs */ physid_mask_t phys_cpu_present_map; @@ -119,7 +119,7 @@ static int MP_valid_apicid(int apicid, int version) } #endif -static void __init MP_processor_info (struct mpc_config_processor *m) +static void __devinit MP_processor_info (struct mpc_config_processor *m) { int ver, apicid; physid_mask_t phys_cpu; @@ -182,17 +182,6 @@ static void __init MP_processor_info (struct mpc_config_processor *m) boot_cpu_physical_apicid = m->mpc_apicid; } - if (num_processors >= NR_CPUS) { - printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached." - " Processor ignored.\n", NR_CPUS); - return; - } - - if (num_processors >= maxcpus) { - printk(KERN_WARNING "WARNING: maxcpus limit of %i reached." - " Processor ignored.\n", maxcpus); - return; - } ver = m->mpc_apicver; if (!MP_valid_apicid(apicid, ver)) { @@ -201,11 +190,6 @@ static void __init MP_processor_info (struct mpc_config_processor *m) return; } - cpu_set(num_processors, cpu_possible_map); - num_processors++; - phys_cpu = apicid_to_cpu_present(apicid); - physids_or(phys_cpu_present_map, phys_cpu_present_map, phys_cpu); - /* * Validate version */ @@ -216,6 +200,25 @@ static void __init MP_processor_info (struct mpc_config_processor *m) ver = 0x10; } apic_version[m->mpc_apicid] = ver; + + phys_cpu = apicid_to_cpu_present(apicid); + physids_or(phys_cpu_present_map, phys_cpu_present_map, phys_cpu); + + if (num_processors >= NR_CPUS) { + printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached." + " Processor ignored.\n", NR_CPUS); + return; + } + + if (num_processors >= maxcpus) { + printk(KERN_WARNING "WARNING: maxcpus limit of %i reached." + " Processor ignored.\n", maxcpus); + return; + } + + cpu_set(num_processors, cpu_possible_map); + num_processors++; + if ((num_processors > 8) && APIC_XAPIC(ver) && (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL)) @@ -834,7 +837,7 @@ void __init mp_register_lapic_address ( } -void __init mp_register_lapic ( +void __devinit mp_register_lapic ( u8 id, u8 enabled) { diff --git a/arch/i386/kernel/nmi.c b/arch/i386/kernel/nmi.c index 72515b8a1b1..d661703ac1c 100644 --- a/arch/i386/kernel/nmi.c +++ b/arch/i386/kernel/nmi.c @@ -100,16 +100,44 @@ int nmi_active; (P4_CCCR_OVF_PMI0|P4_CCCR_THRESHOLD(15)|P4_CCCR_COMPLEMENT| \ P4_CCCR_COMPARE|P4_CCCR_REQUIRED|P4_CCCR_ESCR_SELECT(4)|P4_CCCR_ENABLE) +#ifdef CONFIG_SMP +/* The performance counters used by NMI_LOCAL_APIC don't trigger when + * the CPU is idle. To make sure the NMI watchdog really ticks on all + * CPUs during the test make them busy. + */ +static __init void nmi_cpu_busy(void *data) +{ + volatile int *endflag = data; + local_irq_enable(); + /* Intentionally don't use cpu_relax here. This is + to make sure that the performance counter really ticks, + even if there is a simulator or similar that catches the + pause instruction. On a real HT machine this is fine because + all other CPUs are busy with "useless" delay loops and don't + care if they get somewhat less cycles. */ + while (*endflag == 0) + barrier(); +} +#endif + static int __init check_nmi_watchdog(void) { - unsigned int prev_nmi_count[NR_CPUS]; + volatile int endflag = 0; + unsigned int *prev_nmi_count; int cpu; if (nmi_watchdog == NMI_NONE) return 0; + prev_nmi_count = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL); + if (!prev_nmi_count) + return -1; + printk(KERN_INFO "Testing NMI watchdog ... "); + if (nmi_watchdog == NMI_LOCAL_APIC) + smp_call_function(nmi_cpu_busy, (void *)&endflag, 0, 0); + for (cpu = 0; cpu < NR_CPUS; cpu++) prev_nmi_count[cpu] = per_cpu(irq_stat, cpu).__nmi_count; local_irq_enable(); @@ -123,12 +151,18 @@ static int __init check_nmi_watchdog(void) continue; #endif if (nmi_count(cpu) - prev_nmi_count[cpu] <= 5) { - printk("CPU#%d: NMI appears to be stuck!\n", cpu); + endflag = 1; + printk("CPU#%d: NMI appears to be stuck (%d->%d)!\n", + cpu, + prev_nmi_count[cpu], + nmi_count(cpu)); nmi_active = 0; lapic_nmi_owner &= ~LAPIC_NMI_WATCHDOG; + kfree(prev_nmi_count); return -1; } } + endflag = 1; printk("OK.\n"); /* now that we know it works we can reduce NMI frequency to @@ -136,6 +170,7 @@ static int __init check_nmi_watchdog(void) if (nmi_watchdog == NMI_LOCAL_APIC) nmi_hz = 1; + kfree(prev_nmi_count); return 0; } /* This needs to happen later in boot so counters are working */ diff --git a/arch/i386/kernel/ptrace.c b/arch/i386/kernel/ptrace.c index 7b6368bf897..efd11f09c99 100644 --- a/arch/i386/kernel/ptrace.c +++ b/arch/i386/kernel/ptrace.c @@ -354,7 +354,7 @@ ptrace_set_thread_area(struct task_struct *child, return 0; } -asmlinkage int sys_ptrace(long request, long pid, long addr, long data) +asmlinkage long sys_ptrace(long request, long pid, long addr, long data) { struct task_struct *child; struct user * dummy = NULL; diff --git a/arch/i386/kernel/reboot_fixups.c b/arch/i386/kernel/reboot_fixups.c index 1b183b378c2..c9b87330aee 100644 --- a/arch/i386/kernel/reboot_fixups.c +++ b/arch/i386/kernel/reboot_fixups.c @@ -44,7 +44,7 @@ void mach_reboot_fixups(void) for (i=0; i < (sizeof(fixups_table)/sizeof(fixups_table[0])); i++) { cur = &(fixups_table[i]); - dev = pci_get_device(cur->vendor, cur->device, 0); + dev = pci_get_device(cur->vendor, cur->device, NULL); if (!dev) continue; diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c index 9b8c8a19824..b48ac635f3c 100644 --- a/arch/i386/kernel/setup.c +++ b/arch/i386/kernel/setup.c @@ -389,14 +389,24 @@ static void __init limit_regions(unsigned long long size) } } for (i = 0; i < e820.nr_map; i++) { - if (e820.map[i].type == E820_RAM) { - current_addr = e820.map[i].addr + e820.map[i].size; - if (current_addr >= size) { - e820.map[i].size -= current_addr-size; - e820.nr_map = i + 1; - return; - } + current_addr = e820.map[i].addr + e820.map[i].size; + if (current_addr < size) + continue; + + if (e820.map[i].type != E820_RAM) + continue; + + if (e820.map[i].addr >= size) { + /* + * This region starts past the end of the + * requested size, skip it completely. + */ + e820.nr_map = i; + } else { + e820.nr_map = i + 1; + e820.map[i].size -= current_addr - size; } + return; } } diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c index 1fb26d0e30b..01b618e73ec 100644 --- a/arch/i386/kernel/smpboot.c +++ b/arch/i386/kernel/smpboot.c @@ -87,7 +87,11 @@ EXPORT_SYMBOL(cpu_online_map); cpumask_t cpu_callin_map; cpumask_t cpu_callout_map; EXPORT_SYMBOL(cpu_callout_map); +#ifdef CONFIG_HOTPLUG_CPU +cpumask_t cpu_possible_map = CPU_MASK_ALL; +#else cpumask_t cpu_possible_map; +#endif EXPORT_SYMBOL(cpu_possible_map); static cpumask_t smp_commenced_mask; diff --git a/arch/i386/kernel/srat.c b/arch/i386/kernel/srat.c index 516bf5653b0..8de658db814 100644 --- a/arch/i386/kernel/srat.c +++ b/arch/i386/kernel/srat.c @@ -327,7 +327,12 @@ int __init get_memcfg_from_srat(void) int tables = 0; int i = 0; - acpi_find_root_pointer(ACPI_PHYSICAL_ADDRESSING, rsdp_address); + if (ACPI_FAILURE(acpi_find_root_pointer(ACPI_PHYSICAL_ADDRESSING, + rsdp_address))) { + printk("%s: System description tables not found\n", + __FUNCTION__); + goto out_err; + } if (rsdp_address->pointer_type == ACPI_PHYSICAL_POINTER) { printk("%s: assigning address to rsdp\n", __FUNCTION__); diff --git a/arch/i386/kernel/time.c b/arch/i386/kernel/time.c index 2883a4d4f01..41c5b2dc620 100644 --- a/arch/i386/kernel/time.c +++ b/arch/i386/kernel/time.c @@ -74,10 +74,6 @@ int pit_latch_buggy; /* extern */ #include "do_timer.h" -u64 jiffies_64 = INITIAL_JIFFIES; - -EXPORT_SYMBOL(jiffies_64); - unsigned int cpu_khz; /* Detected as we calibrate the TSC */ EXPORT_SYMBOL(cpu_khz); diff --git a/arch/i386/kernel/time_hpet.c b/arch/i386/kernel/time_hpet.c index 658c0629ba6..9caeaa315cd 100644 --- a/arch/i386/kernel/time_hpet.c +++ b/arch/i386/kernel/time_hpet.c @@ -275,6 +275,7 @@ static unsigned long PIE_freq = DEFAULT_RTC_INT_FREQ; static unsigned long PIE_count; static unsigned long hpet_rtc_int_freq; /* RTC interrupt frequency */ +static unsigned int hpet_t1_cmp; /* cached comparator register */ /* * Timer 1 for RTC, we do not use periodic interrupt feature, @@ -306,10 +307,12 @@ int hpet_rtc_timer_init(void) cnt = hpet_readl(HPET_COUNTER); cnt += ((hpet_tick*HZ)/hpet_rtc_int_freq); hpet_writel(cnt, HPET_T1_CMP); + hpet_t1_cmp = cnt; local_irq_restore(flags); cfg = hpet_readl(HPET_T1_CFG); - cfg |= HPET_TN_ENABLE | HPET_TN_SETVAL | HPET_TN_32BIT; + cfg &= ~HPET_TN_PERIODIC; + cfg |= HPET_TN_ENABLE | HPET_TN_32BIT; hpet_writel(cfg, HPET_T1_CFG); return 1; @@ -319,8 +322,12 @@ static void hpet_rtc_timer_reinit(void) { unsigned int cfg, cnt; - if (!(PIE_on | AIE_on | UIE_on)) + if (unlikely(!(PIE_on | AIE_on | UIE_on))) { + cfg = hpet_readl(HPET_T1_CFG); + cfg &= ~HPET_TN_ENABLE; + hpet_writel(cfg, HPET_T1_CFG); return; + } if (PIE_on && (PIE_freq > DEFAULT_RTC_INT_FREQ)) hpet_rtc_int_freq = PIE_freq; @@ -328,15 +335,10 @@ static void hpet_rtc_timer_reinit(void) hpet_rtc_int_freq = DEFAULT_RTC_INT_FREQ; /* It is more accurate to use the comparator value than current count.*/ - cnt = hpet_readl(HPET_T1_CMP); + cnt = hpet_t1_cmp; cnt += hpet_tick*HZ/hpet_rtc_int_freq; hpet_writel(cnt, HPET_T1_CMP); - - cfg = hpet_readl(HPET_T1_CFG); - cfg |= HPET_TN_ENABLE | HPET_TN_SETVAL | HPET_TN_32BIT; - hpet_writel(cfg, HPET_T1_CFG); - - return; + hpet_t1_cmp = cnt; } /* diff --git a/arch/i386/kernel/timers/timer_hpet.c b/arch/i386/kernel/timers/timer_hpet.c index d973a8b681f..be242723c33 100644 --- a/arch/i386/kernel/timers/timer_hpet.c +++ b/arch/i386/kernel/timers/timer_hpet.c @@ -30,23 +30,28 @@ static seqlock_t monotonic_lock = SEQLOCK_UNLOCKED; * basic equation: * ns = cycles / (freq / ns_per_sec) * ns = cycles * (ns_per_sec / freq) - * ns = cycles * (10^9 / (cpu_mhz * 10^6)) - * ns = cycles * (10^3 / cpu_mhz) + * ns = cycles * (10^9 / (cpu_khz * 10^3)) + * ns = cycles * (10^6 / cpu_khz) * * Then we use scaling math (suggested by george@mvista.com) to get: - * ns = cycles * (10^3 * SC / cpu_mhz) / SC + * ns = cycles * (10^6 * SC / cpu_khz) / SC * ns = cycles * cyc2ns_scale / SC * * And since SC is a constant power of two, we can convert the div * into a shift. + * + * We can use khz divisor instead of mhz to keep a better percision, since + * cyc2ns_scale is limited to 10^6 * 2^10, which fits in 32 bits. + * (mathieu.desnoyers@polymtl.ca) + * * -johnstul@us.ibm.com "math is hard, lets go shopping!" */ static unsigned long cyc2ns_scale; #define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */ -static inline void set_cyc2ns_scale(unsigned long cpu_mhz) +static inline void set_cyc2ns_scale(unsigned long cpu_khz) { - cyc2ns_scale = (1000 << CYC2NS_SCALE_FACTOR)/cpu_mhz; + cyc2ns_scale = (1000000 << CYC2NS_SCALE_FACTOR)/cpu_khz; } static inline unsigned long long cycles_2_ns(unsigned long long cyc) @@ -163,7 +168,7 @@ static int __init init_hpet(char* override) printk("Detected %u.%03u MHz processor.\n", cpu_khz / 1000, cpu_khz % 1000); } - set_cyc2ns_scale(cpu_khz/1000); + set_cyc2ns_scale(cpu_khz); } /* set this only when cpu_has_tsc */ timer_hpet.read_timer = read_timer_tsc; diff --git a/arch/i386/kernel/timers/timer_tsc.c b/arch/i386/kernel/timers/timer_tsc.c index 6dd470cc9f7..d395e3b4248 100644 --- a/arch/i386/kernel/timers/timer_tsc.c +++ b/arch/i386/kernel/timers/timer_tsc.c @@ -49,23 +49,28 @@ static seqlock_t monotonic_lock = SEQLOCK_UNLOCKED; * basic equation: * ns = cycles / (freq / ns_per_sec) * ns = cycles * (ns_per_sec / freq) - * ns = cycles * (10^9 / (cpu_mhz * 10^6)) - * ns = cycles * (10^3 / cpu_mhz) + * ns = cycles * (10^9 / (cpu_khz * 10^3)) + * ns = cycles * (10^6 / cpu_khz) * * Then we use scaling math (suggested by george@mvista.com) to get: - * ns = cycles * (10^3 * SC / cpu_mhz) / SC + * ns = cycles * (10^6 * SC / cpu_khz) / SC * ns = cycles * cyc2ns_scale / SC * * And since SC is a constant power of two, we can convert the div - * into a shift. + * into a shift. + * + * We can use khz divisor instead of mhz to keep a better percision, since + * cyc2ns_scale is limited to 10^6 * 2^10, which fits in 32 bits. + * (mathieu.desnoyers@polymtl.ca) + * * -johnstul@us.ibm.com "math is hard, lets go shopping!" */ static unsigned long cyc2ns_scale; #define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */ -static inline void set_cyc2ns_scale(unsigned long cpu_mhz) +static inline void set_cyc2ns_scale(unsigned long cpu_khz) { - cyc2ns_scale = (1000 << CYC2NS_SCALE_FACTOR)/cpu_mhz; + cyc2ns_scale = (1000000 << CYC2NS_SCALE_FACTOR)/cpu_khz; } static inline unsigned long long cycles_2_ns(unsigned long long cyc) @@ -286,7 +291,7 @@ time_cpufreq_notifier(struct notifier_block *nb, unsigned long val, if (use_tsc) { if (!(freq->flags & CPUFREQ_CONST_LOOPS)) { fast_gettimeoffset_quotient = cpufreq_scale(fast_gettimeoffset_ref, freq->new, ref_freq); - set_cyc2ns_scale(cpu_khz/1000); + set_cyc2ns_scale(cpu_khz); } } #endif @@ -536,7 +541,7 @@ static int __init init_tsc(char* override) printk("Detected %u.%03u MHz processor.\n", cpu_khz / 1000, cpu_khz % 1000); } - set_cyc2ns_scale(cpu_khz/1000); + set_cyc2ns_scale(cpu_khz); return 0; } } diff --git a/arch/i386/kernel/traps.c b/arch/i386/kernel/traps.c index 19e90bdd84e..c34d1bfc516 100644 --- a/arch/i386/kernel/traps.c +++ b/arch/i386/kernel/traps.c @@ -488,6 +488,7 @@ fastcall void __kprobes do_general_protection(struct pt_regs * regs, tss->io_bitmap_max - thread->io_bitmap_max); tss->io_bitmap_max = thread->io_bitmap_max; tss->io_bitmap_base = IO_BITMAP_OFFSET; + tss->io_bitmap_owner = thread; put_cpu(); return; } diff --git a/arch/i386/mach-es7000/es7000.h b/arch/i386/mach-es7000/es7000.h index 898ed905e11..f1e3204f5de 100644 --- a/arch/i386/mach-es7000/es7000.h +++ b/arch/i386/mach-es7000/es7000.h @@ -24,6 +24,15 @@ * http://www.unisys.com */ +/* + * ES7000 chipsets + */ + +#define NON_UNISYS 0 +#define ES7000_CLASSIC 1 +#define ES7000_ZORRO 2 + + #define MIP_REG 1 #define MIP_PSAI_REG 4 @@ -106,6 +115,6 @@ struct mip_reg { extern int parse_unisys_oem (char *oemptr); extern int find_unisys_acpi_oem_table(unsigned long *oem_addr); -extern void setup_unisys (); +extern void setup_unisys(void); extern int es7000_start_cpu(int cpu, unsigned long eip); extern void es7000_sw_apic(void); diff --git a/arch/i386/mach-es7000/es7000plat.c b/arch/i386/mach-es7000/es7000plat.c index dc6660511b0..a9ab0644f40 100644 --- a/arch/i386/mach-es7000/es7000plat.c +++ b/arch/i386/mach-es7000/es7000plat.c @@ -62,6 +62,9 @@ static unsigned int base; static int es7000_rename_gsi(int ioapic, int gsi) { + if (es7000_plat == ES7000_ZORRO) + return gsi; + if (!base) { int i; for (i = 0; i < nr_ioapics; i++) @@ -76,7 +79,7 @@ es7000_rename_gsi(int ioapic, int gsi) #endif /* (CONFIG_X86_IO_APIC) && (CONFIG_ACPI) */ void __init -setup_unisys () +setup_unisys(void) { /* * Determine the generation of the ES7000 currently running. @@ -86,9 +89,9 @@ setup_unisys () * */ if (!(boot_cpu_data.x86 <= 15 && boot_cpu_data.x86_model <= 2)) - es7000_plat = 2; + es7000_plat = ES7000_ZORRO; else - es7000_plat = 1; + es7000_plat = ES7000_CLASSIC; ioapic_renumber_irq = es7000_rename_gsi; } @@ -151,7 +154,7 @@ parse_unisys_oem (char *oemptr) } if (success < 2) { - es7000_plat = 0; + es7000_plat = NON_UNISYS; } else setup_unisys(); return es7000_plat; diff --git a/arch/i386/mm/fault.c b/arch/i386/mm/fault.c index 9edd4485b91..cf572d9a3b6 100644 --- a/arch/i386/mm/fault.c +++ b/arch/i386/mm/fault.c @@ -108,7 +108,7 @@ static inline unsigned long get_segment_eip(struct pt_regs *regs, desc = (void *)desc + (seg & ~7); } else { /* Must disable preemption while reading the GDT. */ - desc = (u32 *)&per_cpu(cpu_gdt_table, get_cpu()); + desc = (u32 *)get_cpu_gdt_table(get_cpu()); desc = (void *)desc + (seg & ~7); } diff --git a/arch/i386/pci/fixup.c b/arch/i386/pci/fixup.c index 330fd2b6807..3984226a8b9 100644 --- a/arch/i386/pci/fixup.c +++ b/arch/i386/pci/fixup.c @@ -398,7 +398,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_video); */ static u16 toshiba_line_size; -static struct dmi_system_id __devinit toshiba_ohci1394_dmi_table[] = { +static struct dmi_system_id __devinitdata toshiba_ohci1394_dmi_table[] = { { .ident = "Toshiba PS5 based laptop", .matches = { diff --git a/arch/i386/pci/irq.c b/arch/i386/pci/irq.c index cddafe33ff7..19e6f4871d1 100644 --- a/arch/i386/pci/irq.c +++ b/arch/i386/pci/irq.c @@ -547,31 +547,48 @@ static __init int intel_router_probe(struct irq_router *r, struct pci_dev *route return 0; } -static __init int via_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) +static __init int via_router_probe(struct irq_router *r, + struct pci_dev *router, u16 device) { /* FIXME: We should move some of the quirk fixup stuff here */ - if (router->device == PCI_DEVICE_ID_VIA_82C686 && - device == PCI_DEVICE_ID_VIA_82C586_0) { - /* Asus k7m bios wrongly reports 82C686A as 586-compatible */ - device = PCI_DEVICE_ID_VIA_82C686; + /* + * work arounds for some buggy BIOSes + */ + if (device == PCI_DEVICE_ID_VIA_82C586_0) { + switch(router->device) { + case PCI_DEVICE_ID_VIA_82C686: + /* + * Asus k7m bios wrongly reports 82C686A + * as 586-compatible + */ + device = PCI_DEVICE_ID_VIA_82C686; + break; + case PCI_DEVICE_ID_VIA_8235: + /** + * Asus a7v-x bios wrongly reports 8235 + * as 586-compatible + */ + device = PCI_DEVICE_ID_VIA_8235; + break; + } } - switch(device) - { - case PCI_DEVICE_ID_VIA_82C586_0: - r->name = "VIA"; - r->get = pirq_via586_get; - r->set = pirq_via586_set; - return 1; - case PCI_DEVICE_ID_VIA_82C596: - case PCI_DEVICE_ID_VIA_82C686: - case PCI_DEVICE_ID_VIA_8231: + switch(device) { + case PCI_DEVICE_ID_VIA_82C586_0: + r->name = "VIA"; + r->get = pirq_via586_get; + r->set = pirq_via586_set; + return 1; + case PCI_DEVICE_ID_VIA_82C596: + case PCI_DEVICE_ID_VIA_82C686: + case PCI_DEVICE_ID_VIA_8231: + case PCI_DEVICE_ID_VIA_8235: /* FIXME: add new ones for 8233/5 */ - r->name = "VIA"; - r->get = pirq_via_get; - r->set = pirq_via_set; - return 1; + r->name = "VIA"; + r->get = pirq_via_get; + r->set = pirq_via_set; + return 1; } return 0; } diff --git a/arch/i386/power/cpu.c b/arch/i386/power/cpu.c index b27c5acc79d..1f1572692e0 100644 --- a/arch/i386/power/cpu.c +++ b/arch/i386/power/cpu.c @@ -51,16 +51,14 @@ void save_processor_state(void) __save_processor_state(&saved_context); } -static void -do_fpu_end(void) +static void do_fpu_end(void) { - /* restore FPU regs if necessary */ - /* Do it out of line so that gcc does not move cr0 load to some stupid place */ - kernel_fpu_end(); - mxcsr_feature_mask_init(); + /* + * Restore FPU regs if necessary. + */ + kernel_fpu_end(); } - static void fix_processor_context(void) { int cpu = smp_processor_id(); |