3 files changed, 65 insertions, 18 deletions

diff --git a/arch/i386/kernel/cpu/mcheck/Makefile b/arch/i386/kernel/cpu/mcheck/Makefile
index 30808f3d671..f1ebe1c1c17 100644
--- a/arch/i386/kernel/cpu/mcheck/Makefile
+++ b/arch/i386/kernel/cpu/mcheck/Makefile
@@ -1,2 +1,2 @@
-obj-y	=	mce.o k7.o p4.o p5.o p6.o winchip.o
+obj-y	=	mce.o k7.o p4.o p5.o p6.o winchip.o therm_throt.o
 obj-$(CONFIG_X86_MCE_NONFATAL)	+=	non-fatal.o
diff --git a/arch/i386/kernel/cpu/mcheck/p4.c b/arch/i386/kernel/cpu/mcheck/p4.c
index b95f1b3d53a..d83a669d376 100644
--- a/arch/i386/kernel/cpu/mcheck/p4.c
+++ b/arch/i386/kernel/cpu/mcheck/p4.c
@@ -13,6 +13,8 @@
 #include <asm/msr.h>
 #include <asm/apic.h>
 
+#include <asm/therm_throt.h>
+
 #include "mce.h"
 
 /* as supported by the P4/Xeon family */
@@ -44,25 +46,12 @@ static void unexpected_thermal_interrupt(struct pt_regs *regs)
 /* P4/Xeon Thermal transition interrupt handler */
 static void intel_thermal_interrupt(struct pt_regs *regs)
 {
-	u32 l, h;
-	unsigned int cpu = smp_processor_id();
-	static unsigned long next[NR_CPUS];
+	__u64 msr_val;
 
 	ack_APIC_irq();
 
-	if (time_after(next[cpu], jiffies))
-		return;
-
-	next[cpu] = jiffies + HZ*5;
-	rdmsr(MSR_IA32_THERM_STATUS, l, h);
-	if (l & 0x1) {
-		printk(KERN_EMERG "CPU%d: Temperature above threshold\n", cpu);
-		printk(KERN_EMERG "CPU%d: Running in modulated clock mode\n",
-				cpu);
-		add_taint(TAINT_MACHINE_CHECK);
-	} else {
-		printk(KERN_INFO "CPU%d: Temperature/speed normal\n", cpu);
-	}
+	rdmsrl(MSR_IA32_THERM_STATUS, msr_val);
+	therm_throt_process(msr_val & 0x1);
 }
 
 /* Thermal interrupt handler for this CPU setup */
@@ -122,7 +111,7 @@ static void intel_init_thermal(struct cpuinfo_x86 *c)
 	
 	rdmsr (MSR_IA32_MISC_ENABLE, l, h);
 	wrmsr (MSR_IA32_MISC_ENABLE, l | (1<<3), h);
-	
+
 	l = apic_read (APIC_LVTTHMR);
 	apic_write_around (APIC_LVTTHMR, l & ~APIC_LVT_MASKED);
 	printk (KERN_INFO "CPU%d: Thermal monitoring enabled\n", cpu);
diff --git a/arch/i386/kernel/cpu/mcheck/therm_throt.c b/arch/i386/kernel/cpu/mcheck/therm_throt.c
new file mode 100644
index 00000000000..85eba00d680
--- /dev/null
+++ b/arch/i386/kernel/cpu/mcheck/therm_throt.c
@@ -0,0 +1,58 @@
+/*
+ * linux/arch/i386/kerne/cpu/mcheck/therm_throt.c
+ *
+ * Thermal throttle event support code.
+ *
+ * Author: Dmitriy Zavin (dmitriyz@google.com)
+ *
+ * Credits: Adapted from Zwane Mwaikambo's original code in mce_intel.c.
+ *
+ */
+
+#include <linux/percpu.h>
+#include <linux/cpu.h>
+#include <asm/cpu.h>
+#include <linux/notifier.h>
+#include <asm/therm_throt.h>
+
+/* How long to wait between reporting thermal events */
+#define CHECK_INTERVAL              (300 * HZ)
+
+static DEFINE_PER_CPU(unsigned long, next_check);
+
+/***
+ * therm_throt_process - Process thermal throttling event
+ * @curr: Whether the condition is current or not (boolean), since the
+ *        thermal interrupt normally gets called both when the thermal
+ *        event begins and once the event has ended.
+ *
+ * This function is normally called by the thermal interrupt after the
+ * IRQ has been acknowledged.
+ *
+ * It will take care of rate limiting and printing messages to the syslog.
+ *
+ * Returns: 0 : Event should NOT be further logged, i.e. still in
+ *              "timeout" from previous log message.
+ *          1 : Event should be logged further, and a message has been
+ *              printed to the syslog.
+ */
+int therm_throt_process(int curr)
+{
+	unsigned int cpu = smp_processor_id();
+
+	if (time_before(jiffies, __get_cpu_var(next_check)))
+		return 0;
+
+	__get_cpu_var(next_check) = jiffies + CHECK_INTERVAL;
+
+	/* if we just entered the thermal event */
+	if (curr) {
+		printk(KERN_CRIT "CPU%d: Temperature above threshold, "
+		       "cpu clock throttled\n", cpu);
+		add_taint(TAINT_MACHINE_CHECK);
+	} else {
+		printk(KERN_CRIT "CPU%d: Temperature/speed normal\n", cpu);
+	}
+
+	return 1;
+}