5 files changed, 26 insertions, 26 deletions

diff --git a/arch/m68k/atari/ataints.c b/arch/m68k/atari/ataints.c
index dba4afabb44..39478dd08e6 100644
--- a/arch/m68k/atari/ataints.c
+++ b/arch/m68k/atari/ataints.c
@@ -187,8 +187,8 @@ __asm__ (__ALIGN_STR "\n"						   \
 "	jbra	ret_from_interrupt\n"					   \
 	 : : "i" (&kstat_cpu(0).irqs[n+8]), "i" (&irq_handler[n+8]),	   \
 	     "n" (PT_OFF_SR), "n" (n),					   \
-	     "i" (n & 8 ? (n & 16 ? &tt_mfp.int_mk_a : &mfp.int_mk_a)	   \
-		        : (n & 16 ? &tt_mfp.int_mk_b : &mfp.int_mk_b)),	   \
+	     "i" (n & 8 ? (n & 16 ? &tt_mfp.int_mk_a : &st_mfp.int_mk_a)   \
+		        : (n & 16 ? &tt_mfp.int_mk_b : &st_mfp.int_mk_b)), \
 	     "m" (preempt_count()), "di" (HARDIRQ_OFFSET)		   \
 );									   \
 	for (;;);			/* fake noreturn */		   \
@@ -366,14 +366,14 @@ void __init atari_init_IRQ(void)
 	/* Initialize the MFP(s) */
 
 #ifdef ATARI_USE_SOFTWARE_EOI
-	mfp.vec_adr  = 0x48;	/* Software EOI-Mode */
+	st_mfp.vec_adr  = 0x48;	/* Software EOI-Mode */
 #else
-	mfp.vec_adr  = 0x40;	/* Automatic EOI-Mode */
+	st_mfp.vec_adr  = 0x40;	/* Automatic EOI-Mode */
 #endif
-	mfp.int_en_a = 0x00;	/* turn off MFP-Ints */
-	mfp.int_en_b = 0x00;
-	mfp.int_mk_a = 0xff;	/* no Masking */
-	mfp.int_mk_b = 0xff;
+	st_mfp.int_en_a = 0x00;	/* turn off MFP-Ints */
+	st_mfp.int_en_b = 0x00;
+	st_mfp.int_mk_a = 0xff;	/* no Masking */
+	st_mfp.int_mk_b = 0xff;
 
 	if (ATARIHW_PRESENT(TT_MFP)) {
 #ifdef ATARI_USE_SOFTWARE_EOI
diff --git a/arch/m68k/atari/atakeyb.c b/arch/m68k/atari/atakeyb.c
index a5f33c05997..4add96d13b1 100644
--- a/arch/m68k/atari/atakeyb.c
+++ b/arch/m68k/atari/atakeyb.c
@@ -609,10 +609,10 @@ int atari_keyb_init(void)
 				 ACIA_RHTID : 0);
 
 	/* make sure the interrupt line is up */
-	} while ((mfp.par_dt_reg & 0x10) == 0);
+	} while ((st_mfp.par_dt_reg & 0x10) == 0);
 
 	/* enable ACIA Interrupts */
-	mfp.active_edge &= ~0x10;
+	st_mfp.active_edge &= ~0x10;
 	atari_turnon_irq(IRQ_MFP_ACIA);
 
 	ikbd_self_test = 1;
diff --git a/arch/m68k/atari/config.c b/arch/m68k/atari/config.c
index 49c28cdbea5..ae2d96e5d61 100644
--- a/arch/m68k/atari/config.c
+++ b/arch/m68k/atari/config.c
@@ -258,7 +258,7 @@ void __init config_atari(void)
 			printk("STND_SHIFTER ");
 		}
 	}
-	if (hwreg_present(&mfp.par_dt_reg)) {
+	if (hwreg_present(&st_mfp.par_dt_reg)) {
 		ATARIHW_SET(ST_MFP);
 		printk("ST_MFP ");
 	}
diff --git a/arch/m68k/atari/debug.c b/arch/m68k/atari/debug.c
index 702b15ccfab..28efdc33c1a 100644
--- a/arch/m68k/atari/debug.c
+++ b/arch/m68k/atari/debug.c
@@ -34,9 +34,9 @@ static struct console atari_console_driver = {
 
 static inline void ata_mfp_out(char c)
 {
-	while (!(mfp.trn_stat & 0x80))	/* wait for tx buf empty */
+	while (!(st_mfp.trn_stat & 0x80))	/* wait for tx buf empty */
 		barrier();
-	mfp.usart_dta = c;
+	st_mfp.usart_dta = c;
 }
 
 static void atari_mfp_console_write(struct console *co, const char *str,
@@ -91,7 +91,7 @@ static int ata_par_out(char c)
 	/* This a some-seconds timeout in case no printer is connected */
 	unsigned long i = loops_per_jiffy > 1 ? loops_per_jiffy : 10000000/HZ;
 
-	while ((mfp.par_dt_reg & 1) && --i) /* wait for BUSY == L */
+	while ((st_mfp.par_dt_reg & 1) && --i) /* wait for BUSY == L */
 		;
 	if (!i)
 		return 0;
@@ -131,9 +131,9 @@ static void atari_par_console_write(struct console *co, const char *str,
 #if 0
 int atari_mfp_console_wait_key(struct console *co)
 {
-	while (!(mfp.rcv_stat & 0x80))	/* wait for rx buf filled */
+	while (!(st_mfp.rcv_stat & 0x80))	/* wait for rx buf filled */
 		barrier();
-	return mfp.usart_dta;
+	return st_mfp.usart_dta;
 }
 
 int atari_scc_console_wait_key(struct console *co)
@@ -175,12 +175,12 @@ static void __init atari_init_mfp_port(int cflag)
 		baud = B9600;		/* use default 9600bps for non-implemented rates */
 	baud -= B1200;			/* baud_table[] starts at 1200bps */
 
-	mfp.trn_stat &= ~0x01;		/* disable TX */
-	mfp.usart_ctr = parity | csize | 0x88; /* 1:16 clk mode, 1 stop bit */
-	mfp.tim_ct_cd &= 0x70;		/* stop timer D */
-	mfp.tim_dt_d = baud_table[baud];
-	mfp.tim_ct_cd |= 0x01;		/* start timer D, 1:4 */
-	mfp.trn_stat |= 0x01;		/* enable TX */
+	st_mfp.trn_stat &= ~0x01;	/* disable TX */
+	st_mfp.usart_ctr = parity | csize | 0x88; /* 1:16 clk mode, 1 stop bit */
+	st_mfp.tim_ct_cd &= 0x70;	/* stop timer D */
+	st_mfp.tim_dt_d = baud_table[baud];
+	st_mfp.tim_ct_cd |= 0x01;	/* start timer D, 1:4 */
+	st_mfp.trn_stat |= 0x01;	/* enable TX */
 }
 
 #define SCC_WRITE(reg, val)				\
diff --git a/arch/m68k/atari/time.c b/arch/m68k/atari/time.c
index d076ff8d1b3..a0531f34c61 100644
--- a/arch/m68k/atari/time.c
+++ b/arch/m68k/atari/time.c
@@ -27,9 +27,9 @@ void __init
 atari_sched_init(irq_handler_t timer_routine)
 {
     /* set Timer C data Register */
-    mfp.tim_dt_c = INT_TICKS;
+    st_mfp.tim_dt_c = INT_TICKS;
     /* start timer C, div = 1:100 */
-    mfp.tim_ct_cd = (mfp.tim_ct_cd & 15) | 0x60;
+    st_mfp.tim_ct_cd = (st_mfp.tim_ct_cd & 15) | 0x60;
     /* install interrupt service routine for MFP Timer C */
     if (request_irq(IRQ_MFP_TIMC, timer_routine, IRQ_TYPE_SLOW,
 		    "timer", timer_routine))
@@ -46,11 +46,11 @@ unsigned long atari_gettimeoffset (void)
   unsigned long ticks, offset = 0;
 
   /* read MFP timer C current value */
-  ticks = mfp.tim_dt_c;
+  ticks = st_mfp.tim_dt_c;
   /* The probability of underflow is less than 2% */
   if (ticks > INT_TICKS - INT_TICKS / 50)
     /* Check for pending timer interrupt */
-    if (mfp.int_pn_b & (1 << 5))
+    if (st_mfp.int_pn_b & (1 << 5))
       offset = TICK_SIZE;
 
   ticks = INT_TICKS - ticks;