diff options
Diffstat (limited to 'arch/m68k/mac/debug.c')
| -rw-r--r-- | arch/m68k/mac/debug.c | 365 |
1 files changed, 0 insertions, 365 deletions
diff --git a/arch/m68k/mac/debug.c b/arch/m68k/mac/debug.c deleted file mode 100644 index bce074ceb76..00000000000 --- a/arch/m68k/mac/debug.c +++ /dev/null @@ -1,365 +0,0 @@ -/* - * linux/arch/m68k/mac/debug.c - * - * Shamelessly stolen (SCC code and general framework) from: - * - * linux/arch/m68k/atari/debug.c - * - * Atari debugging and serial console stuff - * - * Assembled of parts of former atari/config.c 97-12-18 by Roman Hodek - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive - * for more details. - */ - -#include <linux/types.h> -#include <linux/sched.h> -#include <linux/tty.h> -#include <linux/console.h> -#include <linux/init.h> -#include <linux/delay.h> - -#define BOOTINFO_COMPAT_1_0 -#include <asm/setup.h> -#include <asm/bootinfo.h> -#include <asm/macints.h> - -extern unsigned long mac_videobase; -extern unsigned long mac_rowbytes; - -extern void mac_serial_print(const char *); - -#define DEBUG_HEADS -#undef DEBUG_SCREEN -#define DEBUG_SERIAL - -/* - * These two auxiliary debug functions should go away ASAP. Only usage: - * before the console output is up (after head.S come some other crucial - * setup routines :-) it permits writing 'data' to the screen as bit patterns - * (good luck reading those). Helped to figure that the bootinfo contained - * garbage data on the amount and size of memory chunks ... - * - * The 'pos' argument now simply means 'linefeed after print' ... - */ - -#ifdef DEBUG_SCREEN -static int peng, line; -#endif - -#if 0 - -void mac_debugging_short(int pos, short num) -{ -#ifdef DEBUG_SCREEN - unsigned char *pengoffset; - unsigned char *pptr; - int i; -#endif - -#ifdef DEBUG_SERIAL - printk("debug: %d !\n", num); -#endif - -#ifdef DEBUG_SCREEN - if (!MACH_IS_MAC) { - /* printk("debug: %d !\n", num); */ - return; - } - - /* calculate current offset */ - pengoffset = (unsigned char *)mac_videobase + - (150+line*2) * mac_rowbytes + 80 * peng; - - pptr = pengoffset; - - for (i = 0; i < 8 * sizeof(short); i++) { /* # of bits */ - /* value mask for bit i, reverse order */ - *pptr++ = (num & (1 << (8*sizeof(short)-i-1)) ? 0xFF : 0x00); - } - - peng++; - - if (pos) { - line++; - peng = 0; - } -#endif -} - -void mac_debugging_long(int pos, long addr) -{ -#ifdef DEBUG_SCREEN - unsigned char *pengoffset; - unsigned char *pptr; - int i; -#endif - -#ifdef DEBUG_SERIAL - printk("debug: #%ld !\n", addr); -#endif - -#ifdef DEBUG_SCREEN - if (!MACH_IS_MAC) { - /* printk("debug: #%ld !\n", addr); */ - return; - } - - pengoffset=(unsigned char *)(mac_videobase+(150+line*2)*mac_rowbytes) - +80*peng; - - pptr = pengoffset; - - for (i = 0; i < 8 * sizeof(long); i++) { /* # of bits */ - *pptr++ = (addr & (1 << (8*sizeof(long)-i-1)) ? 0xFF : 0x00); - } - - peng++; - - if (pos) { - line++; - peng = 0; - } -#endif -} - -#endif /* 0 */ - -#ifdef DEBUG_SERIAL -/* - * TODO: serial debug code - */ - -struct mac_SCC { - u_char cha_b_ctrl; - u_char char_dummy1; - u_char cha_a_ctrl; - u_char char_dummy2; - u_char cha_b_data; - u_char char_dummy3; - u_char cha_a_data; -}; - -# define scc (*((volatile struct mac_SCC*)mac_bi_data.sccbase)) - -static int scc_port = -1; - -static struct console mac_console_driver = { - .name = "debug", - .flags = CON_PRINTBUFFER, - .index = -1, -}; - -/* - * Crude hack to get console output to the screen before the framebuffer - * is initialized (happens a lot later in 2.1!). - * We just use the console routines declared in head.S, this will interfere - * with regular framebuffer console output and should be used exclusively - * to debug kernel problems manifesting before framebuffer init (aka WSOD) - * - * To keep this hack from interfering with the regular console driver, either - * deregister this driver before/on framebuffer console init, or silence this - * function after the fbcon driver is running (will lose console messages!?). - * To debug real early bugs, need to write a 'mac_register_console_hack()' - * that is called from start_kernel() before setup_arch() and just registers - * this driver if Mac. - */ - -static void mac_debug_console_write(struct console *co, const char *str, - unsigned int count) -{ - mac_serial_print(str); -} - - - -/* Mac: loops_per_jiffy min. 19000 ^= .5 us; MFPDELAY was 0.6 us*/ - -#define uSEC 1 - -static inline void mac_sccb_out(char c) -{ - int i; - - do { - for (i = uSEC; i > 0; --i) - barrier(); - } while (!(scc.cha_b_ctrl & 0x04)); /* wait for tx buf empty */ - for (i = uSEC; i > 0; --i) - barrier(); - scc.cha_b_data = c; -} - -static inline void mac_scca_out(char c) -{ - int i; - - do { - for (i = uSEC; i > 0; --i) - barrier(); - } while (!(scc.cha_a_ctrl & 0x04)); /* wait for tx buf empty */ - for (i = uSEC; i > 0; --i) - barrier(); - scc.cha_a_data = c; -} - -static void mac_sccb_console_write(struct console *co, const char *str, - unsigned int count) -{ - while (count--) { - if (*str == '\n') - mac_sccb_out('\r'); - mac_sccb_out(*str++); - } -} - -static void mac_scca_console_write(struct console *co, const char *str, - unsigned int count) -{ - while (count--) { - if (*str == '\n') - mac_scca_out('\r'); - mac_scca_out(*str++); - } -} - - -/* The following two functions do a quick'n'dirty initialization of the MFP or - * SCC serial ports. They're used by the debugging interface, kgdb, and the - * serial console code. */ -#define SCCB_WRITE(reg,val) \ - do { \ - int i; \ - scc.cha_b_ctrl = (reg); \ - for (i = uSEC; i > 0; --i) \ - barrier(); \ - scc.cha_b_ctrl = (val); \ - for (i = uSEC; i > 0; --i) \ - barrier(); \ - } while(0) - -#define SCCA_WRITE(reg,val) \ - do { \ - int i; \ - scc.cha_a_ctrl = (reg); \ - for (i = uSEC; i > 0; --i) \ - barrier(); \ - scc.cha_a_ctrl = (val); \ - for (i = uSEC; i > 0; --i) \ - barrier(); \ - } while(0) - -/* loops_per_jiffy isn't initialized yet, so we can't use udelay(). This does a - * delay of ~ 60us. */ -/* Mac: loops_per_jiffy min. 19000 ^= .5 us; MFPDELAY was 0.6 us*/ -#define LONG_DELAY() \ - do { \ - int i; \ - for (i = 60*uSEC; i > 0; --i) \ - barrier(); \ - } while(0) - -static void __init mac_init_scc_port(int cflag, int port) -{ - /* - * baud rates: 1200, 1800, 2400, 4800, 9600, 19.2k, 38.4k, 57.6k, 115.2k - */ - - static int clksrc_table[9] = - /* reg 11: 0x50 = BRG, 0x00 = RTxC, 0x28 = TRxC */ - { 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x00, 0x00 }; - static int clkmode_table[9] = - /* reg 4: 0x40 = x16, 0x80 = x32, 0xc0 = x64 */ - { 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0xc0, 0x80 }; - static int div_table[9] = - /* reg12 (BRG low) */ - { 94, 62, 46, 22, 10, 4, 1, 0, 0 }; - - int baud = cflag & CBAUD; - int clksrc, clkmode, div, reg3, reg5; - - if (cflag & CBAUDEX) - baud += B38400; - if (baud < B1200 || baud > B38400+2) - baud = B9600; /* use default 9600bps for non-implemented rates */ - baud -= B1200; /* tables starts at 1200bps */ - - clksrc = clksrc_table[baud]; - clkmode = clkmode_table[baud]; - div = div_table[baud]; - - reg3 = (((cflag & CSIZE) == CS8) ? 0xc0 : 0x40); - reg5 = (((cflag & CSIZE) == CS8) ? 0x60 : 0x20) | 0x82 /* assert DTR/RTS */; - - if (port == 1) { - (void)scc.cha_b_ctrl; /* reset reg pointer */ - SCCB_WRITE(9, 0xc0); /* reset */ - LONG_DELAY(); /* extra delay after WR9 access */ - SCCB_WRITE(4, (cflag & PARENB) ? ((cflag & PARODD) ? 0x01 : 0x03) : 0 | - 0x04 /* 1 stopbit */ | - clkmode); - SCCB_WRITE(3, reg3); - SCCB_WRITE(5, reg5); - SCCB_WRITE(9, 0); /* no interrupts */ - LONG_DELAY(); /* extra delay after WR9 access */ - SCCB_WRITE(10, 0); /* NRZ mode */ - SCCB_WRITE(11, clksrc); /* main clock source */ - SCCB_WRITE(12, div); /* BRG value */ - SCCB_WRITE(13, 0); /* BRG high byte */ - SCCB_WRITE(14, 1); - SCCB_WRITE(3, reg3 | 1); - SCCB_WRITE(5, reg5 | 8); - } else if (port == 0) { - (void)scc.cha_a_ctrl; /* reset reg pointer */ - SCCA_WRITE(9, 0xc0); /* reset */ - LONG_DELAY(); /* extra delay after WR9 access */ - SCCA_WRITE(4, (cflag & PARENB) ? ((cflag & PARODD) ? 0x01 : 0x03) : 0 | - 0x04 /* 1 stopbit */ | - clkmode); - SCCA_WRITE(3, reg3); - SCCA_WRITE(5, reg5); - SCCA_WRITE(9, 0); /* no interrupts */ - LONG_DELAY(); /* extra delay after WR9 access */ - SCCA_WRITE(10, 0); /* NRZ mode */ - SCCA_WRITE(11, clksrc); /* main clock source */ - SCCA_WRITE(12, div); /* BRG value */ - SCCA_WRITE(13, 0); /* BRG high byte */ - SCCA_WRITE(14, 1); - SCCA_WRITE(3, reg3 | 1); - SCCA_WRITE(5, reg5 | 8); - } -} -#endif /* DEBUG_SERIAL */ - -static int __init mac_debug_setup(char *arg) -{ - if (!MACH_IS_MAC) - return 0; - -#ifdef DEBUG_SERIAL - if (!strcmp(arg, "ser") || !strcmp(arg, "ser1")) { - /* Mac modem port */ - mac_init_scc_port(B9600|CS8, 0); - mac_console_driver.write = mac_scca_console_write; - scc_port = 0; - } else if (!strcmp(arg, "ser2")) { - /* Mac printer port */ - mac_init_scc_port(B9600|CS8, 1); - mac_console_driver.write = mac_sccb_console_write; - scc_port = 1; - } -#endif -#ifdef DEBUG_HEADS - if (!strcmp(arg, "scn") || !strcmp(arg, "con")) { - /* display, using head.S console routines */ - mac_console_driver.write = mac_debug_console_write; - } -#endif - if (mac_console_driver.write) - register_console(&mac_console_driver); - return 0; -} - -early_param("debug", mac_debug_setup); |