diff options
Diffstat (limited to 'arch/m68k/platform/5249/config.c')
-rw-r--r-- | arch/m68k/platform/5249/config.c | 330 |
1 files changed, 330 insertions, 0 deletions
diff --git a/arch/m68k/platform/5249/config.c b/arch/m68k/platform/5249/config.c new file mode 100644 index 00000000000..ceb31e5744a --- /dev/null +++ b/arch/m68k/platform/5249/config.c @@ -0,0 +1,330 @@ +/***************************************************************************/ + +/* + * linux/arch/m68knommu/platform/5249/config.c + * + * Copyright (C) 2002, Greg Ungerer (gerg@snapgear.com) + */ + +/***************************************************************************/ + +#include <linux/kernel.h> +#include <linux/param.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/spi/spi.h> +#include <linux/gpio.h> +#include <asm/machdep.h> +#include <asm/coldfire.h> +#include <asm/mcfsim.h> +#include <asm/mcfuart.h> +#include <asm/mcfqspi.h> + +/***************************************************************************/ + +static struct mcf_platform_uart m5249_uart_platform[] = { + { + .mapbase = MCF_MBAR + MCFUART_BASE1, + .irq = 73, + }, + { + .mapbase = MCF_MBAR + MCFUART_BASE2, + .irq = 74, + }, + { }, +}; + +static struct platform_device m5249_uart = { + .name = "mcfuart", + .id = 0, + .dev.platform_data = m5249_uart_platform, +}; + +#ifdef CONFIG_M5249C3 + +static struct resource m5249_smc91x_resources[] = { + { + .start = 0xe0000300, + .end = 0xe0000300 + 0x100, + .flags = IORESOURCE_MEM, + }, + { + .start = MCFINTC2_GPIOIRQ6, + .end = MCFINTC2_GPIOIRQ6, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device m5249_smc91x = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(m5249_smc91x_resources), + .resource = m5249_smc91x_resources, +}; + +#endif /* CONFIG_M5249C3 */ + +#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) +static struct resource m5249_qspi_resources[] = { + { + .start = MCFQSPI_IOBASE, + .end = MCFQSPI_IOBASE + MCFQSPI_IOSIZE - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = MCF_IRQ_QSPI, + .end = MCF_IRQ_QSPI, + .flags = IORESOURCE_IRQ, + }, +}; + +#define MCFQSPI_CS0 29 +#define MCFQSPI_CS1 24 +#define MCFQSPI_CS2 21 +#define MCFQSPI_CS3 22 + +static int m5249_cs_setup(struct mcfqspi_cs_control *cs_control) +{ + int status; + + status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0"); + if (status) { + pr_debug("gpio_request for MCFQSPI_CS0 failed\n"); + goto fail0; + } + status = gpio_direction_output(MCFQSPI_CS0, 1); + if (status) { + pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n"); + goto fail1; + } + + status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1"); + if (status) { + pr_debug("gpio_request for MCFQSPI_CS1 failed\n"); + goto fail1; + } + status = gpio_direction_output(MCFQSPI_CS1, 1); + if (status) { + pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n"); + goto fail2; + } + + status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2"); + if (status) { + pr_debug("gpio_request for MCFQSPI_CS2 failed\n"); + goto fail2; + } + status = gpio_direction_output(MCFQSPI_CS2, 1); + if (status) { + pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n"); + goto fail3; + } + + status = gpio_request(MCFQSPI_CS3, "MCFQSPI_CS3"); + if (status) { + pr_debug("gpio_request for MCFQSPI_CS3 failed\n"); + goto fail3; + } + status = gpio_direction_output(MCFQSPI_CS3, 1); + if (status) { + pr_debug("gpio_direction_output for MCFQSPI_CS3 failed\n"); + goto fail4; + } + + return 0; + +fail4: + gpio_free(MCFQSPI_CS3); +fail3: + gpio_free(MCFQSPI_CS2); +fail2: + gpio_free(MCFQSPI_CS1); +fail1: + gpio_free(MCFQSPI_CS0); +fail0: + return status; +} + +static void m5249_cs_teardown(struct mcfqspi_cs_control *cs_control) +{ + gpio_free(MCFQSPI_CS3); + gpio_free(MCFQSPI_CS2); + gpio_free(MCFQSPI_CS1); + gpio_free(MCFQSPI_CS0); +} + +static void m5249_cs_select(struct mcfqspi_cs_control *cs_control, + u8 chip_select, bool cs_high) +{ + switch (chip_select) { + case 0: + gpio_set_value(MCFQSPI_CS0, cs_high); + break; + case 1: + gpio_set_value(MCFQSPI_CS1, cs_high); + break; + case 2: + gpio_set_value(MCFQSPI_CS2, cs_high); + break; + case 3: + gpio_set_value(MCFQSPI_CS3, cs_high); + break; + } +} + +static void m5249_cs_deselect(struct mcfqspi_cs_control *cs_control, + u8 chip_select, bool cs_high) +{ + switch (chip_select) { + case 0: + gpio_set_value(MCFQSPI_CS0, !cs_high); + break; + case 1: + gpio_set_value(MCFQSPI_CS1, !cs_high); + break; + case 2: + gpio_set_value(MCFQSPI_CS2, !cs_high); + break; + case 3: + gpio_set_value(MCFQSPI_CS3, !cs_high); + break; + } +} + +static struct mcfqspi_cs_control m5249_cs_control = { + .setup = m5249_cs_setup, + .teardown = m5249_cs_teardown, + .select = m5249_cs_select, + .deselect = m5249_cs_deselect, +}; + +static struct mcfqspi_platform_data m5249_qspi_data = { + .bus_num = 0, + .num_chipselect = 4, + .cs_control = &m5249_cs_control, +}; + +static struct platform_device m5249_qspi = { + .name = "mcfqspi", + .id = 0, + .num_resources = ARRAY_SIZE(m5249_qspi_resources), + .resource = m5249_qspi_resources, + .dev.platform_data = &m5249_qspi_data, +}; + +static void __init m5249_qspi_init(void) +{ + /* QSPI irq setup */ + writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI0, + MCF_MBAR + MCFSIM_QSPIICR); + mcf_mapirq2imr(MCF_IRQ_QSPI, MCFINTC_QSPI); +} +#endif /* defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) */ + + +static struct platform_device *m5249_devices[] __initdata = { + &m5249_uart, +#ifdef CONFIG_M5249C3 + &m5249_smc91x, +#endif +#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) + &m5249_qspi, +#endif +}; + +/***************************************************************************/ + +static void __init m5249_uart_init_line(int line, int irq) +{ + if (line == 0) { + writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR); + writeb(irq, MCF_MBAR + MCFUART_BASE1 + MCFUART_UIVR); + mcf_mapirq2imr(irq, MCFINTC_UART0); + } else if (line == 1) { + writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR); + writeb(irq, MCF_MBAR + MCFUART_BASE2 + MCFUART_UIVR); + mcf_mapirq2imr(irq, MCFINTC_UART1); + } +} + +static void __init m5249_uarts_init(void) +{ + const int nrlines = ARRAY_SIZE(m5249_uart_platform); + int line; + + for (line = 0; (line < nrlines); line++) + m5249_uart_init_line(line, m5249_uart_platform[line].irq); +} + +/***************************************************************************/ + +#ifdef CONFIG_M5249C3 + +static void __init m5249_smc91x_init(void) +{ + u32 gpio; + + /* Set the GPIO line as interrupt source for smc91x device */ + gpio = readl(MCF_MBAR2 + MCFSIM2_GPIOINTENABLE); + writel(gpio | 0x40, MCF_MBAR2 + MCFSIM2_GPIOINTENABLE); + + gpio = readl(MCF_MBAR2 + MCFSIM2_INTLEVEL5); + writel(gpio | 0x04000000, MCF_MBAR2 + MCFSIM2_INTLEVEL5); +} + +#endif /* CONFIG_M5249C3 */ + +/***************************************************************************/ + +static void __init m5249_timers_init(void) +{ + /* Timer1 is always used as system timer */ + writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3, + MCF_MBAR + MCFSIM_TIMER1ICR); + mcf_mapirq2imr(MCF_IRQ_TIMER, MCFINTC_TIMER1); + +#ifdef CONFIG_HIGHPROFILE + /* Timer2 is to be used as a high speed profile timer */ + writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3, + MCF_MBAR + MCFSIM_TIMER2ICR); + mcf_mapirq2imr(MCF_IRQ_PROFILER, MCFINTC_TIMER2); +#endif +} + +/***************************************************************************/ + +void m5249_cpu_reset(void) +{ + local_irq_disable(); + /* Set watchdog to soft reset, and enabled */ + __raw_writeb(0xc0, MCF_MBAR + MCFSIM_SYPCR); + for (;;) + /* wait for watchdog to timeout */; +} + +/***************************************************************************/ + +void __init config_BSP(char *commandp, int size) +{ + mach_reset = m5249_cpu_reset; + m5249_timers_init(); + m5249_uarts_init(); +#ifdef CONFIG_M5249C3 + m5249_smc91x_init(); +#endif +#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) + m5249_qspi_init(); +#endif +} + +/***************************************************************************/ + +static int __init init_BSP(void) +{ + platform_add_devices(m5249_devices, ARRAY_SIZE(m5249_devices)); + return 0; +} + +arch_initcall(init_BSP); + +/***************************************************************************/ |