diff options
Diffstat (limited to 'arch/m68k/platform/528x/config.c')
| -rw-r--r-- | arch/m68k/platform/528x/config.c | 320 |
1 files changed, 320 insertions, 0 deletions
diff --git a/arch/m68k/platform/528x/config.c b/arch/m68k/platform/528x/config.c new file mode 100644 index 00000000000..7abe77a2f3e --- /dev/null +++ b/arch/m68k/platform/528x/config.c @@ -0,0 +1,320 @@ +/***************************************************************************/ + +/* + * linux/arch/m68knommu/platform/528x/config.c + * + * Sub-architcture dependent initialization code for the Freescale + * 5280, 5281 and 5282 CPUs. + * + * Copyright (C) 1999-2003, Greg Ungerer (gerg@snapgear.com) + * Copyright (C) 2001-2003, SnapGear Inc. (www.snapgear.com) + */ + +/***************************************************************************/ + +#include <linux/kernel.h> +#include <linux/param.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/spi/spi.h> +#include <linux/gpio.h> +#include <asm/machdep.h> +#include <asm/coldfire.h> +#include <asm/mcfsim.h> +#include <asm/mcfuart.h> +#include <asm/mcfqspi.h> + +/***************************************************************************/ + +static struct mcf_platform_uart m528x_uart_platform[] = { + { + .mapbase = MCFUART_BASE1, + .irq = MCFINT_VECBASE + MCFINT_UART0, + }, + { + .mapbase = MCFUART_BASE2, + .irq = MCFINT_VECBASE + MCFINT_UART0 + 1, + }, + { + .mapbase = MCFUART_BASE3, + .irq = MCFINT_VECBASE + MCFINT_UART0 + 2, + }, + { }, +}; + +static struct platform_device m528x_uart = { + .name = "mcfuart", + .id = 0, + .dev.platform_data = m528x_uart_platform, +}; + +static struct resource m528x_fec_resources[] = { + { + .start = MCFFEC_BASE, + .end = MCFFEC_BASE + MCFFEC_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = 64 + 23, + .end = 64 + 23, + .flags = IORESOURCE_IRQ, + }, + { + .start = 64 + 27, + .end = 64 + 27, + .flags = IORESOURCE_IRQ, + }, + { + .start = 64 + 29, + .end = 64 + 29, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device m528x_fec = { + .name = "fec", + .id = 0, + .num_resources = ARRAY_SIZE(m528x_fec_resources), + .resource = m528x_fec_resources, +}; + +#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) +static struct resource m528x_qspi_resources[] = { + { + .start = MCFQSPI_IOBASE, + .end = MCFQSPI_IOBASE + MCFQSPI_IOSIZE - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = MCFINT_VECBASE + MCFINT_QSPI, + .end = MCFINT_VECBASE + MCFINT_QSPI, + .flags = IORESOURCE_IRQ, + }, +}; + +#define MCFQSPI_CS0 147 +#define MCFQSPI_CS1 148 +#define MCFQSPI_CS2 149 +#define MCFQSPI_CS3 150 + +static int m528x_cs_setup(struct mcfqspi_cs_control *cs_control) +{ + int status; + + status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0"); + if (status) { + pr_debug("gpio_request for MCFQSPI_CS0 failed\n"); + goto fail0; + } + status = gpio_direction_output(MCFQSPI_CS0, 1); + if (status) { + pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n"); + goto fail1; + } + + status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1"); + if (status) { + pr_debug("gpio_request for MCFQSPI_CS1 failed\n"); + goto fail1; + } + status = gpio_direction_output(MCFQSPI_CS1, 1); + if (status) { + pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n"); + goto fail2; + } + + status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2"); + if (status) { + pr_debug("gpio_request for MCFQSPI_CS2 failed\n"); + goto fail2; + } + status = gpio_direction_output(MCFQSPI_CS2, 1); + if (status) { + pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n"); + goto fail3; + } + + status = gpio_request(MCFQSPI_CS3, "MCFQSPI_CS3"); + if (status) { + pr_debug("gpio_request for MCFQSPI_CS3 failed\n"); + goto fail3; + } + status = gpio_direction_output(MCFQSPI_CS3, 1); + if (status) { + pr_debug("gpio_direction_output for MCFQSPI_CS3 failed\n"); + goto fail4; + } + + return 0; + +fail4: + gpio_free(MCFQSPI_CS3); +fail3: + gpio_free(MCFQSPI_CS2); +fail2: + gpio_free(MCFQSPI_CS1); +fail1: + gpio_free(MCFQSPI_CS0); +fail0: + return status; +} + +static void m528x_cs_teardown(struct mcfqspi_cs_control *cs_control) +{ + gpio_free(MCFQSPI_CS3); + gpio_free(MCFQSPI_CS2); + gpio_free(MCFQSPI_CS1); + gpio_free(MCFQSPI_CS0); +} + +static void m528x_cs_select(struct mcfqspi_cs_control *cs_control, + u8 chip_select, bool cs_high) +{ + gpio_set_value(MCFQSPI_CS0 + chip_select, cs_high); +} + +static void m528x_cs_deselect(struct mcfqspi_cs_control *cs_control, + u8 chip_select, bool cs_high) +{ + gpio_set_value(MCFQSPI_CS0 + chip_select, !cs_high); +} + +static struct mcfqspi_cs_control m528x_cs_control = { + .setup = m528x_cs_setup, + .teardown = m528x_cs_teardown, + .select = m528x_cs_select, + .deselect = m528x_cs_deselect, +}; + +static struct mcfqspi_platform_data m528x_qspi_data = { + .bus_num = 0, + .num_chipselect = 4, + .cs_control = &m528x_cs_control, +}; + +static struct platform_device m528x_qspi = { + .name = "mcfqspi", + .id = 0, + .num_resources = ARRAY_SIZE(m528x_qspi_resources), + .resource = m528x_qspi_resources, + .dev.platform_data = &m528x_qspi_data, +}; + +static void __init m528x_qspi_init(void) +{ + /* setup Port QS for QSPI with gpio CS control */ + __raw_writeb(0x07, MCFGPIO_PQSPAR); +} +#endif /* defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) */ + +static struct platform_device *m528x_devices[] __initdata = { + &m528x_uart, + &m528x_fec, +#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) + &m528x_qspi, +#endif +}; + +/***************************************************************************/ + +static void __init m528x_uart_init_line(int line, int irq) +{ + u8 port; + + if ((line < 0) || (line > 2)) + return; + + /* make sure PUAPAR is set for UART0 and UART1 */ + if (line < 2) { + port = readb(MCF5282_GPIO_PUAPAR); + port |= (0x03 << (line * 2)); + writeb(port, MCF5282_GPIO_PUAPAR); + } +} + +static void __init m528x_uarts_init(void) +{ + const int nrlines = ARRAY_SIZE(m528x_uart_platform); + int line; + + for (line = 0; (line < nrlines); line++) + m528x_uart_init_line(line, m528x_uart_platform[line].irq); +} + +/***************************************************************************/ + +static void __init m528x_fec_init(void) +{ + u16 v16; + + /* Set multi-function pins to ethernet mode for fec0 */ + v16 = readw(MCF_IPSBAR + 0x100056); + writew(v16 | 0xf00, MCF_IPSBAR + 0x100056); + writeb(0xc0, MCF_IPSBAR + 0x100058); +} + +/***************************************************************************/ + +static void m528x_cpu_reset(void) +{ + local_irq_disable(); + __raw_writeb(MCF_RCR_SWRESET, MCF_IPSBAR + MCF_RCR); +} + +/***************************************************************************/ + +#ifdef CONFIG_WILDFIRE +void wildfire_halt(void) +{ + writeb(0, 0x30000007); + writeb(0x2, 0x30000007); +} +#endif + +#ifdef CONFIG_WILDFIREMOD +void wildfiremod_halt(void) +{ + printk(KERN_INFO "WildFireMod hibernating...\n"); + + /* Set portE.5 to Digital IO */ + MCF5282_GPIO_PEPAR &= ~(1 << (5 * 2)); + + /* Make portE.5 an output */ + MCF5282_GPIO_DDRE |= (1 << 5); + + /* Now toggle portE.5 from low to high */ + MCF5282_GPIO_PORTE &= ~(1 << 5); + MCF5282_GPIO_PORTE |= (1 << 5); + + printk(KERN_EMERG "Failed to hibernate. Halting!\n"); +} +#endif + +void __init config_BSP(char *commandp, int size) +{ +#ifdef CONFIG_WILDFIRE + mach_halt = wildfire_halt; +#endif +#ifdef CONFIG_WILDFIREMOD + mach_halt = wildfiremod_halt; +#endif +} + +/***************************************************************************/ + +static int __init init_BSP(void) +{ + mach_reset = m528x_cpu_reset; + m528x_uarts_init(); + m528x_fec_init(); +#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) + m528x_qspi_init(); +#endif + platform_add_devices(m528x_devices, ARRAY_SIZE(m528x_devices)); + return 0; +} + +arch_initcall(init_BSP); + +/***************************************************************************/ |