diff options
Diffstat (limited to 'arch/m68k/platform/coldfire/device.c')
| -rw-r--r-- | arch/m68k/platform/coldfire/device.c | 162 |
1 files changed, 161 insertions, 1 deletions
diff --git a/arch/m68k/platform/coldfire/device.c b/arch/m68k/platform/coldfire/device.c index 24b0d5e5350..fa50c48292f 100644 --- a/arch/m68k/platform/coldfire/device.c +++ b/arch/m68k/platform/coldfire/device.c @@ -11,10 +11,13 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/io.h> +#include <linux/spi/spi.h> +#include <linux/gpio.h> #include <asm/traps.h> #include <asm/coldfire.h> #include <asm/mcfsim.h> #include <asm/mcfuart.h> +#include <asm/mcfqspi.h> /* * All current ColdFire parts contain from 2, 3 or 4 UARTS. @@ -118,6 +121,161 @@ static struct platform_device mcf_fec1 = { #endif /* MCFFEC_BASE1 */ #endif /* CONFIG_FEC */ +#ifdef CONFIG_SPI_COLDFIRE_QSPI +/* + * The ColdFire QSPI module is an SPI protocol hardware block used + * on a number of different ColdFire CPUs. + */ +static struct resource mcf_qspi_resources[] = { + { + .start = MCFQSPI_BASE, + .end = MCFQSPI_BASE + MCFQSPI_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = MCF_IRQ_QSPI, + .end = MCF_IRQ_QSPI, + .flags = IORESOURCE_IRQ, + }, +}; + +static int mcf_cs_setup(struct mcfqspi_cs_control *cs_control) +{ + int status; + + status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0"); + if (status) { + pr_debug("gpio_request for MCFQSPI_CS0 failed\n"); + goto fail0; + } + status = gpio_direction_output(MCFQSPI_CS0, 1); + if (status) { + pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n"); + goto fail1; + } + + status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1"); + if (status) { + pr_debug("gpio_request for MCFQSPI_CS1 failed\n"); + goto fail1; + } + status = gpio_direction_output(MCFQSPI_CS1, 1); + if (status) { + pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n"); + goto fail2; + } + + status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2"); + if (status) { + pr_debug("gpio_request for MCFQSPI_CS2 failed\n"); + goto fail2; + } + status = gpio_direction_output(MCFQSPI_CS2, 1); + if (status) { + pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n"); + goto fail3; + } + +#ifdef MCFQSPI_CS3 + status = gpio_request(MCFQSPI_CS3, "MCFQSPI_CS3"); + if (status) { + pr_debug("gpio_request for MCFQSPI_CS3 failed\n"); + goto fail3; + } + status = gpio_direction_output(MCFQSPI_CS3, 1); + if (status) { + pr_debug("gpio_direction_output for MCFQSPI_CS3 failed\n"); + gpio_free(MCFQSPI_CS3); + goto fail3; + } +#endif + + return 0; + +fail3: + gpio_free(MCFQSPI_CS2); +fail2: + gpio_free(MCFQSPI_CS1); +fail1: + gpio_free(MCFQSPI_CS0); +fail0: + return status; +} + +static void mcf_cs_teardown(struct mcfqspi_cs_control *cs_control) +{ +#ifdef MCFQSPI_CS3 + gpio_free(MCFQSPI_CS3); +#endif + gpio_free(MCFQSPI_CS2); + gpio_free(MCFQSPI_CS1); + gpio_free(MCFQSPI_CS0); +} + +static void mcf_cs_select(struct mcfqspi_cs_control *cs_control, + u8 chip_select, bool cs_high) +{ + switch (chip_select) { + case 0: + gpio_set_value(MCFQSPI_CS0, cs_high); + break; + case 1: + gpio_set_value(MCFQSPI_CS1, cs_high); + break; + case 2: + gpio_set_value(MCFQSPI_CS2, cs_high); + break; +#ifdef MCFQSPI_CS3 + case 3: + gpio_set_value(MCFQSPI_CS3, cs_high); + break; +#endif + } +} + +static void mcf_cs_deselect(struct mcfqspi_cs_control *cs_control, + u8 chip_select, bool cs_high) +{ + switch (chip_select) { + case 0: + gpio_set_value(MCFQSPI_CS0, !cs_high); + break; + case 1: + gpio_set_value(MCFQSPI_CS1, !cs_high); + break; + case 2: + gpio_set_value(MCFQSPI_CS2, !cs_high); + break; +#ifdef MCFQSPI_CS3 + case 3: + gpio_set_value(MCFQSPI_CS3, !cs_high); + break; +#endif + } +} + +static struct mcfqspi_cs_control mcf_cs_control = { + .setup = mcf_cs_setup, + .teardown = mcf_cs_teardown, + .select = mcf_cs_select, + .deselect = mcf_cs_deselect, +}; + +static struct mcfqspi_platform_data mcf_qspi_data = { + .bus_num = 0, + .num_chipselect = 4, + .cs_control = &mcf_cs_control, +}; + +static struct platform_device mcf_qspi = { + .name = "mcfqspi", + .id = 0, + .num_resources = ARRAY_SIZE(mcf_qspi_resources), + .resource = mcf_qspi_resources, + .dev.platform_data = &mcf_qspi_data, +}; +#endif /* CONFIG_SPI_COLDFIRE_QSPI */ + static struct platform_device *mcf_devices[] __initdata = { &mcf_uart, #ifdef CONFIG_FEC @@ -126,9 +284,11 @@ static struct platform_device *mcf_devices[] __initdata = { &mcf_fec1, #endif #endif +#ifdef CONFIG_SPI_COLDFIRE_QSPI + &mcf_qspi, +#endif }; - /* * Some ColdFire UARTs let you set the IRQ line to use. */ |