diff options
Diffstat (limited to 'arch/m68k/platform/coldfire/m520x.c')
| -rw-r--r-- | arch/m68k/platform/coldfire/m520x.c | 103 |
1 files changed, 103 insertions, 0 deletions
diff --git a/arch/m68k/platform/coldfire/m520x.c b/arch/m68k/platform/coldfire/m520x.c new file mode 100644 index 00000000000..3264b8883d5 --- /dev/null +++ b/arch/m68k/platform/coldfire/m520x.c @@ -0,0 +1,103 @@ +/***************************************************************************/ + +/* + * linux/arch/m68knommu/platform/520x/config.c + * + * Copyright (C) 2005, Freescale (www.freescale.com) + * Copyright (C) 2005, Intec Automation (mike@steroidmicros.com) + * Copyright (C) 1999-2007, Greg Ungerer (gerg@snapgear.com) + * Copyright (C) 2001-2003, SnapGear Inc. (www.snapgear.com) + */ + +/***************************************************************************/ + +#include <linux/kernel.h> +#include <linux/param.h> +#include <linux/init.h> +#include <linux/io.h> +#include <asm/machdep.h> +#include <asm/coldfire.h> +#include <asm/mcfsim.h> +#include <asm/mcfuart.h> +#include <asm/mcfgpio.h> + +/***************************************************************************/ + +struct mcf_gpio_chip mcf_gpio_chips[] = { + MCFGPS(PIRQ, 0, 8, MCFEPORT_EPDDR, MCFEPORT_EPDR, MCFEPORT_EPPDR), + MCFGPF(CS, 9, 3), + MCFGPF(FECI2C, 16, 4), + MCFGPF(QSPI, 24, 4), + MCFGPF(TIMER, 32, 4), + MCFGPF(UART, 40, 8), + MCFGPF(FECH, 48, 8), + MCFGPF(FECL, 56, 8), +}; + +unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips); + +/***************************************************************************/ + +#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) + +static void __init m520x_qspi_init(void) +{ + u16 par; + /* setup Port QS for QSPI with gpio CS control */ + writeb(0x3f, MCF_GPIO_PAR_QSPI); + /* make U1CTS and U2RTS gpio for cs_control */ + par = readw(MCF_GPIO_PAR_UART); + par &= 0x00ff; + writew(par, MCF_GPIO_PAR_UART); +} + +#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */ + +/***************************************************************************/ + +static void __init m520x_uarts_init(void) +{ + u16 par; + u8 par2; + + /* UART0 and UART1 GPIO pin setup */ + par = readw(MCF_GPIO_PAR_UART); + par |= MCF_GPIO_PAR_UART_PAR_UTXD0 | MCF_GPIO_PAR_UART_PAR_URXD0; + par |= MCF_GPIO_PAR_UART_PAR_UTXD1 | MCF_GPIO_PAR_UART_PAR_URXD1; + writew(par, MCF_GPIO_PAR_UART); + + /* UART1 GPIO pin setup */ + par2 = readb(MCF_GPIO_PAR_FECI2C); + par2 &= ~0x0F; + par2 |= MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 | + MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2; + writeb(par2, MCF_GPIO_PAR_FECI2C); +} + +/***************************************************************************/ + +static void __init m520x_fec_init(void) +{ + u8 v; + + /* Set multi-function pins to ethernet mode */ + v = readb(MCF_GPIO_PAR_FEC); + writeb(v | 0xf0, MCF_GPIO_PAR_FEC); + + v = readb(MCF_GPIO_PAR_FECI2C); + writeb(v | 0x0f, MCF_GPIO_PAR_FECI2C); +} + +/***************************************************************************/ + +void __init config_BSP(char *commandp, int size) +{ + mach_sched_init = hw_timer_init; + m520x_uarts_init(); + m520x_fec_init(); +#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) + m520x_qspi_init(); +#endif +} + +/***************************************************************************/ |