summaryrefslogtreecommitdiffstats
path: root/arch/m68k
diff options
context:
space:
mode:
Diffstat (limited to 'arch/m68k')
-rw-r--r--arch/m68k/include/asm/m520xsim.h1
-rw-r--r--arch/m68k/include/asm/m523xsim.h5
-rw-r--r--arch/m68k/include/asm/m5249sim.h2
-rw-r--r--arch/m68k/include/asm/m527xsim.h7
-rw-r--r--arch/m68k/include/asm/m528xsim.h67
-rw-r--r--arch/m68k/include/asm/m532xsim.h1
-rw-r--r--arch/m68k/include/asm/mcfqspi.h64
-rw-r--r--arch/m68k/include/asm/mcfsmc.h187
-rw-r--r--arch/m68k/include/asm/processor.h4
9 files changed, 85 insertions, 253 deletions
diff --git a/arch/m68k/include/asm/m520xsim.h b/arch/m68k/include/asm/m520xsim.h
index ed2b69b9680..db824a4b136 100644
--- a/arch/m68k/include/asm/m520xsim.h
+++ b/arch/m68k/include/asm/m520xsim.h
@@ -113,6 +113,7 @@
#define MCF_GPIO_PAR_UART (0xA4036)
#define MCF_GPIO_PAR_FECI2C (0xA4033)
+#define MCF_GPIO_PAR_QSPI (0xA4034)
#define MCF_GPIO_PAR_FEC (0xA4038)
#define MCF_GPIO_PAR_UART_PAR_URXD0 (0x0001)
diff --git a/arch/m68k/include/asm/m523xsim.h b/arch/m68k/include/asm/m523xsim.h
index a34894cf8e6..e8d06b24a48 100644
--- a/arch/m68k/include/asm/m523xsim.h
+++ b/arch/m68k/include/asm/m523xsim.h
@@ -127,5 +127,10 @@
#define MCFGPIO_IRQ_MAX 8
#define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE
+/*
+ * Pin Assignment
+*/
+#define MCFGPIO_PAR_QSPI (MCF_IPSBAR + 0x10004A)
+#define MCFGPIO_PAR_TIMER (MCF_IPSBAR + 0x10004C)
/****************************************************************************/
#endif /* m523xsim_h */
diff --git a/arch/m68k/include/asm/m5249sim.h b/arch/m68k/include/asm/m5249sim.h
index 14bce877ed8..79b7b402f3c 100644
--- a/arch/m68k/include/asm/m5249sim.h
+++ b/arch/m68k/include/asm/m5249sim.h
@@ -69,10 +69,12 @@
#define MCFSIM_DMA1ICR MCFSIM_ICR7 /* DMA 1 ICR */
#define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */
#define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */
+#define MCFSIM_QSPIICR MCFSIM_ICR10 /* QSPI ICR */
/*
* Define system peripheral IRQ usage.
*/
+#define MCF_IRQ_QSPI 28 /* QSPI, Level 4 */
#define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */
#define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */
diff --git a/arch/m68k/include/asm/m527xsim.h b/arch/m68k/include/asm/m527xsim.h
index 453356d72d8..1feb46f108c 100644
--- a/arch/m68k/include/asm/m527xsim.h
+++ b/arch/m68k/include/asm/m527xsim.h
@@ -31,6 +31,7 @@
#define MCFINT_UART0 13 /* Interrupt number for UART0 */
#define MCFINT_UART1 14 /* Interrupt number for UART1 */
#define MCFINT_UART2 15 /* Interrupt number for UART2 */
+#define MCFINT_QSPI 18 /* Interrupt number for QSPI */
#define MCFINT_PIT1 36 /* Interrupt number for PIT1 */
/*
@@ -120,6 +121,9 @@
#define MCFGPIO_PIN_MAX 100
#define MCFGPIO_IRQ_MAX 8
#define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE
+
+#define MCFGPIO_PAR_QSPI (MCF_IPSBAR + 0x10004A)
+#define MCFGPIO_PAR_TIMER (MCF_IPSBAR + 0x10004C)
#endif
#ifdef CONFIG_M5275
@@ -212,6 +216,8 @@
#define MCFGPIO_PIN_MAX 148
#define MCFGPIO_IRQ_MAX 8
#define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE
+
+#define MCFGPIO_PAR_QSPI (MCF_IPSBAR + 0x10007E)
#endif
/*
@@ -223,6 +229,7 @@
#define MCFEPORT_EPPDR (MCF_IPSBAR + 0x130005)
+
/*
* GPIO pins setups to enable the UARTs.
*/
diff --git a/arch/m68k/include/asm/m528xsim.h b/arch/m68k/include/asm/m528xsim.h
index e2ad1f42b65..891cbedad97 100644
--- a/arch/m68k/include/asm/m528xsim.h
+++ b/arch/m68k/include/asm/m528xsim.h
@@ -29,6 +29,7 @@
#define MCFINT_VECBASE 64 /* Vector base number */
#define MCFINT_UART0 13 /* Interrupt number for UART0 */
+#define MCFINT_QSPI 18 /* Interrupt number for QSPI */
#define MCFINT_PIT1 55 /* Interrupt number for PIT1 */
/*
@@ -249,70 +250,4 @@
#define MCF5282_I2C_I2SR_RXAK (0x01) // received acknowledge
-
-/*********************************************************************
-*
-* Queued Serial Peripheral Interface (QSPI) Module
-*
-*********************************************************************/
-/* Derek - 21 Feb 2005 */
-/* change to the format used in I2C */
-/* Read/Write access macros for general use */
-#define MCF5282_QSPI_QMR MCF_IPSBAR + 0x0340
-#define MCF5282_QSPI_QDLYR MCF_IPSBAR + 0x0344
-#define MCF5282_QSPI_QWR MCF_IPSBAR + 0x0348
-#define MCF5282_QSPI_QIR MCF_IPSBAR + 0x034C
-#define MCF5282_QSPI_QAR MCF_IPSBAR + 0x0350
-#define MCF5282_QSPI_QDR MCF_IPSBAR + 0x0354
-#define MCF5282_QSPI_QCR MCF_IPSBAR + 0x0354
-
-/* Bit level definitions and macros */
-#define MCF5282_QSPI_QMR_MSTR (0x8000)
-#define MCF5282_QSPI_QMR_DOHIE (0x4000)
-#define MCF5282_QSPI_QMR_BITS_16 (0x0000)
-#define MCF5282_QSPI_QMR_BITS_8 (0x2000)
-#define MCF5282_QSPI_QMR_BITS_9 (0x2400)
-#define MCF5282_QSPI_QMR_BITS_10 (0x2800)
-#define MCF5282_QSPI_QMR_BITS_11 (0x2C00)
-#define MCF5282_QSPI_QMR_BITS_12 (0x3000)
-#define MCF5282_QSPI_QMR_BITS_13 (0x3400)
-#define MCF5282_QSPI_QMR_BITS_14 (0x3800)
-#define MCF5282_QSPI_QMR_BITS_15 (0x3C00)
-#define MCF5282_QSPI_QMR_CPOL (0x0200)
-#define MCF5282_QSPI_QMR_CPHA (0x0100)
-#define MCF5282_QSPI_QMR_BAUD(x) (((x)&0x00FF))
-
-#define MCF5282_QSPI_QDLYR_SPE (0x80)
-#define MCF5282_QSPI_QDLYR_QCD(x) (((x)&0x007F)<<8)
-#define MCF5282_QSPI_QDLYR_DTL(x) (((x)&0x00FF))
-
-#define MCF5282_QSPI_QWR_HALT (0x8000)
-#define MCF5282_QSPI_QWR_WREN (0x4000)
-#define MCF5282_QSPI_QWR_WRTO (0x2000)
-#define MCF5282_QSPI_QWR_CSIV (0x1000)
-#define MCF5282_QSPI_QWR_ENDQP(x) (((x)&0x000F)<<8)
-#define MCF5282_QSPI_QWR_CPTQP(x) (((x)&0x000F)<<4)
-#define MCF5282_QSPI_QWR_NEWQP(x) (((x)&0x000F))
-
-#define MCF5282_QSPI_QIR_WCEFB (0x8000)
-#define MCF5282_QSPI_QIR_ABRTB (0x4000)
-#define MCF5282_QSPI_QIR_ABRTL (0x1000)
-#define MCF5282_QSPI_QIR_WCEFE (0x0800)
-#define MCF5282_QSPI_QIR_ABRTE (0x0400)
-#define MCF5282_QSPI_QIR_SPIFE (0x0100)
-#define MCF5282_QSPI_QIR_WCEF (0x0008)
-#define MCF5282_QSPI_QIR_ABRT (0x0004)
-#define MCF5282_QSPI_QIR_SPIF (0x0001)
-
-#define MCF5282_QSPI_QAR_ADDR(x) (((x)&0x003F))
-
-#define MCF5282_QSPI_QDR_COMMAND(x) (((x)&0xFF00))
-#define MCF5282_QSPI_QCR_DATA(x) (((x)&0x00FF)<<8)
-#define MCF5282_QSPI_QCR_CONT (0x8000)
-#define MCF5282_QSPI_QCR_BITSE (0x4000)
-#define MCF5282_QSPI_QCR_DT (0x2000)
-#define MCF5282_QSPI_QCR_DSCK (0x1000)
-#define MCF5282_QSPI_QCR_CS (((x)&0x000F)<<8)
-
-/****************************************************************************/
#endif /* m528xsim_h */
diff --git a/arch/m68k/include/asm/m532xsim.h b/arch/m68k/include/asm/m532xsim.h
index 36bf15aec9a..c4bf1c81e3c 100644
--- a/arch/m68k/include/asm/m532xsim.h
+++ b/arch/m68k/include/asm/m532xsim.h
@@ -17,6 +17,7 @@
#define MCFINT_UART0 26 /* Interrupt number for UART0 */
#define MCFINT_UART1 27 /* Interrupt number for UART1 */
#define MCFINT_UART2 28 /* Interrupt number for UART2 */
+#define MCFINT_QSPI 31 /* Interrupt number for QSPI */
#define MCF_WTM_WCR MCF_REG16(0xFC098000)
diff --git a/arch/m68k/include/asm/mcfqspi.h b/arch/m68k/include/asm/mcfqspi.h
new file mode 100644
index 00000000000..39d90d51111
--- /dev/null
+++ b/arch/m68k/include/asm/mcfqspi.h
@@ -0,0 +1,64 @@
+/*
+ * Definitions for Freescale Coldfire QSPI module
+ *
+ * Copyright 2010 Steven King <sfking@fdwdc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+*/
+
+#ifndef mcfqspi_h
+#define mcfqspi_h
+
+#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
+#define MCFQSPI_IOBASE (MCF_IPSBAR + 0x340)
+#elif defined(CONFIG_M5249)
+#define MCFQSPI_IOBASE (MCF_MBAR + 0x300)
+#elif defined(CONFIG_M520x) || defined(CONFIG_M532x)
+#define MCFQSPI_IOBASE 0xFC058000
+#endif
+#define MCFQSPI_IOSIZE 0x40
+
+/**
+ * struct mcfqspi_cs_control - chip select control for the coldfire qspi driver
+ * @setup: setup the control; allocate gpio's, etc. May be NULL.
+ * @teardown: finish with the control; free gpio's, etc. May be NULL.
+ * @select: output the signals to select the device. Can not be NULL.
+ * @deselect: output the signals to deselect the device. Can not be NULL.
+ *
+ * The QSPI module has 4 hardware chip selects. We don't use them. Instead
+ * platforms are required to supply a mcfqspi_cs_control as a part of the
+ * platform data for each QSPI master controller. Only the select and
+ * deselect functions are required.
+*/
+struct mcfqspi_cs_control {
+ int (*setup)(struct mcfqspi_cs_control *);
+ void (*teardown)(struct mcfqspi_cs_control *);
+ void (*select)(struct mcfqspi_cs_control *, u8, bool);
+ void (*deselect)(struct mcfqspi_cs_control *, u8, bool);
+};
+
+/**
+ * struct mcfqspi_platform_data - platform data for the coldfire qspi driver
+ * @bus_num: board specific identifier for this qspi driver.
+ * @num_chipselects: number of chip selects supported by this qspi driver.
+ * @cs_control: platform dependent chip select control.
+*/
+struct mcfqspi_platform_data {
+ s16 bus_num;
+ u16 num_chipselect;
+ struct mcfqspi_cs_control *cs_control;
+};
+
+#endif /* mcfqspi_h */
diff --git a/arch/m68k/include/asm/mcfsmc.h b/arch/m68k/include/asm/mcfsmc.h
deleted file mode 100644
index 527bea5d678..00000000000
--- a/arch/m68k/include/asm/mcfsmc.h
+++ /dev/null
@@ -1,187 +0,0 @@
-/****************************************************************************/
-
-/*
- * mcfsmc.h -- SMC ethernet support for ColdFire environments.
- *
- * (C) Copyright 1999-2002, Greg Ungerer (gerg@snapgear.com)
- * (C) Copyright 2000, Lineo Inc. (www.lineo.com)
- */
-
-/****************************************************************************/
-#ifndef mcfsmc_h
-#define mcfsmc_h
-/****************************************************************************/
-
-/*
- * None of the current ColdFire targets that use the SMC91x111
- * allow 8 bit accesses. So this code is 16bit access only.
- */
-
-
-#undef outb
-#undef inb
-#undef outw
-#undef outwd
-#undef inw
-#undef outl
-#undef inl
-
-#undef outsb
-#undef outsw
-#undef outsl
-#undef insb
-#undef insw
-#undef insl
-
-/*
- * Re-defines for ColdFire environment... The SMC part is
- * mapped into memory space, so remap the PC-style in/out
- * routines to handle that.
- */
-#define outb smc_outb
-#define inb smc_inb
-#define outw smc_outw
-#define outwd smc_outwd
-#define inw smc_inw
-#define outl smc_outl
-#define inl smc_inl
-
-#define outsb smc_outsb
-#define outsw smc_outsw
-#define outsl smc_outsl
-#define insb smc_insb
-#define insw smc_insw
-#define insl smc_insl
-
-
-static inline int smc_inb(unsigned int addr)
-{
- register unsigned short w;
- w = *((volatile unsigned short *) (addr & ~0x1));
- return(((addr & 0x1) ? w : (w >> 8)) & 0xff);
-}
-
-static inline void smc_outw(unsigned int val, unsigned int addr)
-{
- *((volatile unsigned short *) addr) = (val << 8) | (val >> 8);
-}
-
-static inline int smc_inw(unsigned int addr)
-{
- register unsigned short w;
- w = *((volatile unsigned short *) addr);
- return(((w << 8) | (w >> 8)) & 0xffff);
-}
-
-static inline void smc_outl(unsigned long val, unsigned int addr)
-{
- *((volatile unsigned long *) addr) =
- ((val << 8) & 0xff000000) | ((val >> 8) & 0x00ff0000) |
- ((val << 8) & 0x0000ff00) | ((val >> 8) & 0x000000ff);
-}
-
-static inline void smc_outwd(unsigned int val, unsigned int addr)
-{
- *((volatile unsigned short *) addr) = val;
-}
-
-
-/*
- * The rep* functions are used to feed the data port with
- * raw data. So we do not byte swap them when copying.
- */
-
-static inline void smc_insb(unsigned int addr, void *vbuf, int unsigned long len)
-{
- volatile unsigned short *rp;
- unsigned short *buf, *ebuf;
-
- buf = (unsigned short *) vbuf;
- rp = (volatile unsigned short *) addr;
-
- /* Copy as words for as long as possible */
- for (ebuf = buf + (len >> 1); (buf < ebuf); )
- *buf++ = *rp;
-
- /* Lastly, handle left over byte */
- if (len & 0x1)
- *((unsigned char *) buf) = (*rp >> 8) & 0xff;
-}
-
-static inline void smc_insw(unsigned int addr, void *vbuf, unsigned long len)
-{
- volatile unsigned short *rp;
- unsigned short *buf, *ebuf;
-
- buf = (unsigned short *) vbuf;
- rp = (volatile unsigned short *) addr;
- for (ebuf = buf + len; (buf < ebuf); )
- *buf++ = *rp;
-}
-
-static inline void smc_insl(unsigned int addr, void *vbuf, unsigned long len)
-{
- volatile unsigned long *rp;
- unsigned long *buf, *ebuf;
-
- buf = (unsigned long *) vbuf;
- rp = (volatile unsigned long *) addr;
- for (ebuf = buf + len; (buf < ebuf); )
- *buf++ = *rp;
-}
-
-static inline void smc_outsw(unsigned int addr, const void *vbuf, unsigned long len)
-{
- volatile unsigned short *rp;
- unsigned short *buf, *ebuf;
-
- buf = (unsigned short *) vbuf;
- rp = (volatile unsigned short *) addr;
- for (ebuf = buf + len; (buf < ebuf); )
- *rp = *buf++;
-}
-
-static inline void smc_outsl(unsigned int addr, void *vbuf, unsigned long len)
-{
- volatile unsigned long *rp;
- unsigned long *buf, *ebuf;
-
- buf = (unsigned long *) vbuf;
- rp = (volatile unsigned long *) addr;
- for (ebuf = buf + len; (buf < ebuf); )
- *rp = *buf++;
-}
-
-
-#ifdef CONFIG_NETtel
-/*
- * Re-map the address space of at least one of the SMC ethernet
- * parts. Both parts power up decoding the same address, so we
- * need to move one of them first, before doing enything else.
- *
- * We also increase the number of wait states for this part by one.
- */
-
-void smc_remap(unsigned int ioaddr)
-{
- static int once = 0;
- extern unsigned short ppdata;
- if (once++ == 0) {
- *((volatile unsigned short *)MCFSIM_PADDR) = 0x00ec;
- ppdata |= 0x0080;
- *((volatile unsigned short *)MCFSIM_PADAT) = ppdata;
- outw(0x0001, ioaddr + BANK_SELECT);
- outw(0x0001, ioaddr + BANK_SELECT);
- outw(0x0067, ioaddr + BASE);
-
- ppdata &= ~0x0080;
- *((volatile unsigned short *)MCFSIM_PADAT) = ppdata;
- }
-
- *((volatile unsigned short *)(MCF_MBAR+MCFSIM_CSCR3)) = 0x1180;
-}
-
-#endif
-
-/****************************************************************************/
-#endif /* mcfsmc_h */
diff --git a/arch/m68k/include/asm/processor.h b/arch/m68k/include/asm/processor.h
index cbd3d4751dd..7a6a7590cc0 100644
--- a/arch/m68k/include/asm/processor.h
+++ b/arch/m68k/include/asm/processor.h
@@ -44,11 +44,15 @@ static inline void wrusp(unsigned long usp)
* User space process size: 3.75GB. This is hardcoded into a few places,
* so don't change it unless you know what you are doing.
*/
+#ifdef CONFIG_MMU
#ifndef CONFIG_SUN3
#define TASK_SIZE (0xF0000000UL)
#else
#define TASK_SIZE (0x0E000000UL)
#endif
+#else
+#define TASK_SIZE (0xFFFFFFFFUL)
+#endif
#ifdef __KERNEL__
#define STACK_TOP TASK_SIZE
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-30 10:57:53 +0000