diff options
Diffstat (limited to 'arch/m68k')
26 files changed, 216 insertions, 352 deletions
diff --git a/arch/m68k/amiga/Makefile b/arch/m68k/amiga/Makefile index 6a0d7650f98..11dd30b16b3 100644 --- a/arch/m68k/amiga/Makefile +++ b/arch/m68k/amiga/Makefile @@ -2,6 +2,6 @@ # Makefile for Linux arch/m68k/amiga source directory # -obj-y := config.o amiints.o cia.o chipram.o amisound.o +obj-y := config.o amiints.o cia.o chipram.o amisound.o platform.o obj-$(CONFIG_AMIGA_PCMCIA) += pcmcia.o diff --git a/arch/m68k/amiga/platform.c b/arch/m68k/amiga/platform.c new file mode 100644 index 00000000000..38f18bf1473 --- /dev/null +++ b/arch/m68k/amiga/platform.c @@ -0,0 +1,83 @@ +/* + * Copyright (C) 2007-2009 Geert Uytterhoeven + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/zorro.h> + +#include <asm/amigahw.h> + + +#ifdef CONFIG_ZORRO + +static const struct resource zorro_resources[] __initconst = { + /* Zorro II regions (on Zorro II/III) */ + { + .name = "Zorro II exp", + .start = 0x00e80000, + .end = 0x00efffff, + .flags = IORESOURCE_MEM, + }, { + .name = "Zorro II mem", + .start = 0x00200000, + .end = 0x009fffff, + .flags = IORESOURCE_MEM, + }, + /* Zorro III regions (on Zorro III only) */ + { + .name = "Zorro III exp", + .start = 0xff000000, + .end = 0xffffffff, + .flags = IORESOURCE_MEM, + }, { + .name = "Zorro III cfg", + .start = 0x40000000, + .end = 0x7fffffff, + .flags = IORESOURCE_MEM, + } +}; + + +static int __init amiga_init_bus(void) +{ + if (!MACH_IS_AMIGA || !AMIGAHW_PRESENT(ZORRO)) + return -ENODEV; + + platform_device_register_simple("amiga-zorro", -1, zorro_resources, + AMIGAHW_PRESENT(ZORRO3) ? 4 : 2); + return 0; +} + +subsys_initcall(amiga_init_bus); + +#endif /* CONFIG_ZORRO */ + + +static int __init amiga_init_devices(void) +{ + if (!MACH_IS_AMIGA) + return -ENODEV; + + /* video hardware */ + if (AMIGAHW_PRESENT(AMI_VIDEO)) + platform_device_register_simple("amiga-video", -1, NULL, 0); + + + /* sound hardware */ + if (AMIGAHW_PRESENT(AMI_AUDIO)) + platform_device_register_simple("amiga-audio", -1, NULL, 0); + + + /* storage interfaces */ + if (AMIGAHW_PRESENT(AMI_FLOPPY)) + platform_device_register_simple("amiga-floppy", -1, NULL, 0); + + return 0; +} + +device_initcall(amiga_init_devices); diff --git a/arch/m68k/bvme6000/rtc.c b/arch/m68k/bvme6000/rtc.c index b46ea1714a8..cb8617bb194 100644 --- a/arch/m68k/bvme6000/rtc.c +++ b/arch/m68k/bvme6000/rtc.c @@ -9,7 +9,6 @@ #include <linux/types.h> #include <linux/errno.h> #include <linux/miscdevice.h> -#include <linux/smp_lock.h> #include <linux/ioport.h> #include <linux/capability.h> #include <linux/fcntl.h> @@ -35,10 +34,9 @@ static unsigned char days_in_mo[] = {0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31}; -static char rtc_status; +static atomic_t rtc_status = ATOMIC_INIT(1); -static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) +static long rtc_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { volatile RtcPtr_t rtc = (RtcPtr_t)BVME_RTC_BASE; unsigned char msr; @@ -132,29 +130,20 @@ static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd, } /* - * We enforce only one user at a time here with the open/close. - * Also clear the previous interrupt data on an open, and clean - * up things on a close. + * We enforce only one user at a time here with the open/close. */ - static int rtc_open(struct inode *inode, struct file *file) { - lock_kernel(); - if(rtc_status) { - unlock_kernel(); + if (!atomic_dec_and_test(&rtc_status)) { + atomic_inc(&rtc_status); return -EBUSY; } - - rtc_status = 1; - unlock_kernel(); return 0; } static int rtc_release(struct inode *inode, struct file *file) { - lock_kernel(); - rtc_status = 0; - unlock_kernel(); + atomic_inc(&rtc_status); return 0; } @@ -163,9 +152,9 @@ static int rtc_release(struct inode *inode, struct file *file) */ static const struct file_operations rtc_fops = { - .ioctl = rtc_ioctl, - .open = rtc_open, - .release = rtc_release, + .unlocked_ioctl = rtc_ioctl, + .open = rtc_open, + .release = rtc_release, }; static struct miscdevice rtc_dev = { diff --git a/arch/m68k/hp300/time.h b/arch/m68k/hp300/time.h index f5b3d098b0f..7b98242960d 100644 --- a/arch/m68k/hp300/time.h +++ b/arch/m68k/hp300/time.h @@ -1,4 +1,2 @@ extern void hp300_sched_init(irq_handler_t vector); -extern unsigned long hp300_gettimeoffset (void); - - +extern unsigned long hp300_gettimeoffset(void); diff --git a/arch/m68k/include/asm/atomic_mm.h b/arch/m68k/include/asm/atomic_mm.h index d9d2ed64743..6a223b3f7e7 100644 --- a/arch/m68k/include/asm/atomic_mm.h +++ b/arch/m68k/include/asm/atomic_mm.h @@ -15,7 +15,7 @@ #define ATOMIC_INIT(i) { (i) } -#define atomic_read(v) ((v)->counter) +#define atomic_read(v) (*(volatile int *)&(v)->counter) #define atomic_set(v, i) (((v)->counter) = i) static inline void atomic_add(int i, atomic_t *v) diff --git a/arch/m68k/include/asm/atomic_no.h b/arch/m68k/include/asm/atomic_no.h index 5674cb9449b..289310c63a8 100644 --- a/arch/m68k/include/asm/atomic_no.h +++ b/arch/m68k/include/asm/atomic_no.h @@ -15,7 +15,7 @@ #define ATOMIC_INIT(i) { (i) } -#define atomic_read(v) ((v)->counter) +#define atomic_read(v) (*(volatile int *)&(v)->counter) #define atomic_set(v, i) (((v)->counter) = i) static __inline__ void atomic_add(int i, atomic_t *v) diff --git a/arch/m68k/include/asm/bitops_mm.h b/arch/m68k/include/asm/bitops_mm.h index 9bde784e7ba..b4ecdaada52 100644 --- a/arch/m68k/include/asm/bitops_mm.h +++ b/arch/m68k/include/asm/bitops_mm.h @@ -365,6 +365,10 @@ static inline int minix_test_bit(int nr, const void *vaddr) #define ext2_set_bit_atomic(lock, nr, addr) test_and_set_bit((nr) ^ 24, (unsigned long *)(addr)) #define ext2_clear_bit(nr, addr) __test_and_clear_bit((nr) ^ 24, (unsigned long *)(addr)) #define ext2_clear_bit_atomic(lock, nr, addr) test_and_clear_bit((nr) ^ 24, (unsigned long *)(addr)) +#define ext2_find_next_zero_bit(addr, size, offset) \ + generic_find_next_zero_le_bit((unsigned long *)addr, size, offset) +#define ext2_find_next_bit(addr, size, offset) \ + generic_find_next_le_bit((unsigned long *)addr, size, offset) static inline int ext2_test_bit(int nr, const void *vaddr) { @@ -394,10 +398,9 @@ static inline int ext2_find_first_zero_bit(const void *vaddr, unsigned size) return (p - addr) * 32 + res; } -static inline int ext2_find_next_zero_bit(const void *vaddr, unsigned size, - unsigned offset) +static inline unsigned long generic_find_next_zero_le_bit(const unsigned long *addr, + unsigned long size, unsigned long offset) { - const unsigned long *addr = vaddr; const unsigned long *p = addr + (offset >> 5); int bit = offset & 31UL, res; @@ -437,10 +440,9 @@ static inline int ext2_find_first_bit(const void *vaddr, unsigned size) return (p - addr) * 32 + res; } -static inline int ext2_find_next_bit(const void *vaddr, unsigned size, - unsigned offset) +static inline unsigned long generic_find_next_le_bit(const unsigned long *addr, + unsigned long size, unsigned long offset) { - const unsigned long *addr = vaddr; const unsigned long *p = addr + (offset >> 5); int bit = offset & 31UL, res; diff --git a/arch/m68k/include/asm/m520xsim.h b/arch/m68k/include/asm/m520xsim.h index ed2b69b9680..db824a4b136 100644 --- a/arch/m68k/include/asm/m520xsim.h +++ b/arch/m68k/include/asm/m520xsim.h @@ -113,6 +113,7 @@ #define MCF_GPIO_PAR_UART (0xA4036) #define MCF_GPIO_PAR_FECI2C (0xA4033) +#define MCF_GPIO_PAR_QSPI (0xA4034) #define MCF_GPIO_PAR_FEC (0xA4038) #define MCF_GPIO_PAR_UART_PAR_URXD0 (0x0001) diff --git a/arch/m68k/include/asm/m523xsim.h b/arch/m68k/include/asm/m523xsim.h index a34894cf8e6..e8d06b24a48 100644 --- a/arch/m68k/include/asm/m523xsim.h +++ b/arch/m68k/include/asm/m523xsim.h @@ -127,5 +127,10 @@ #define MCFGPIO_IRQ_MAX 8 #define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE +/* + * Pin Assignment +*/ +#define MCFGPIO_PAR_QSPI (MCF_IPSBAR + 0x10004A) +#define MCFGPIO_PAR_TIMER (MCF_IPSBAR + 0x10004C) /****************************************************************************/ #endif /* m523xsim_h */ diff --git a/arch/m68k/include/asm/m5249sim.h b/arch/m68k/include/asm/m5249sim.h index 14bce877ed8..79b7b402f3c 100644 --- a/arch/m68k/include/asm/m5249sim.h +++ b/arch/m68k/include/asm/m5249sim.h @@ -69,10 +69,12 @@ #define MCFSIM_DMA1ICR MCFSIM_ICR7 /* DMA 1 ICR */ #define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */ #define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */ +#define MCFSIM_QSPIICR MCFSIM_ICR10 /* QSPI ICR */ /* * Define system peripheral IRQ usage. */ +#define MCF_IRQ_QSPI 28 /* QSPI, Level 4 */ #define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */ #define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */ diff --git a/arch/m68k/include/asm/m527xsim.h b/arch/m68k/include/asm/m527xsim.h index 453356d72d8..1feb46f108c 100644 --- a/arch/m68k/include/asm/m527xsim.h +++ b/arch/m68k/include/asm/m527xsim.h @@ -31,6 +31,7 @@ #define MCFINT_UART0 13 /* Interrupt number for UART0 */ #define MCFINT_UART1 14 /* Interrupt number for UART1 */ #define MCFINT_UART2 15 /* Interrupt number for UART2 */ +#define MCFINT_QSPI 18 /* Interrupt number for QSPI */ #define MCFINT_PIT1 36 /* Interrupt number for PIT1 */ /* @@ -120,6 +121,9 @@ #define MCFGPIO_PIN_MAX 100 #define MCFGPIO_IRQ_MAX 8 #define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE + +#define MCFGPIO_PAR_QSPI (MCF_IPSBAR + 0x10004A) +#define MCFGPIO_PAR_TIMER (MCF_IPSBAR + 0x10004C) #endif #ifdef CONFIG_M5275 @@ -212,6 +216,8 @@ #define MCFGPIO_PIN_MAX 148 #define MCFGPIO_IRQ_MAX 8 #define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE + +#define MCFGPIO_PAR_QSPI (MCF_IPSBAR + 0x10007E) #endif /* @@ -223,6 +229,7 @@ #define MCFEPORT_EPPDR (MCF_IPSBAR + 0x130005) + /* * GPIO pins setups to enable the UARTs. */ diff --git a/arch/m68k/include/asm/m528xsim.h b/arch/m68k/include/asm/m528xsim.h index e2ad1f42b65..891cbedad97 100644 --- a/arch/m68k/include/asm/m528xsim.h +++ b/arch/m68k/include/asm/m528xsim.h @@ -29,6 +29,7 @@ #define MCFINT_VECBASE 64 /* Vector base number */ #define MCFINT_UART0 13 /* Interrupt number for UART0 */ +#define MCFINT_QSPI 18 /* Interrupt number for QSPI */ #define MCFINT_PIT1 55 /* Interrupt number for PIT1 */ /* @@ -249,70 +250,4 @@ #define MCF5282_I2C_I2SR_RXAK (0x01) // received acknowledge - -/********************************************************************* -* -* Queued Serial Peripheral Interface (QSPI) Module -* -*********************************************************************/ -/* Derek - 21 Feb 2005 */ -/* change to the format used in I2C */ -/* Read/Write access macros for general use */ -#define MCF5282_QSPI_QMR MCF_IPSBAR + 0x0340 -#define MCF5282_QSPI_QDLYR MCF_IPSBAR + 0x0344 -#define MCF5282_QSPI_QWR MCF_IPSBAR + 0x0348 -#define MCF5282_QSPI_QIR MCF_IPSBAR + 0x034C -#define MCF5282_QSPI_QAR MCF_IPSBAR + 0x0350 -#define MCF5282_QSPI_QDR MCF_IPSBAR + 0x0354 -#define MCF5282_QSPI_QCR MCF_IPSBAR + 0x0354 - -/* Bit level definitions and macros */ -#define MCF5282_QSPI_QMR_MSTR (0x8000) -#define MCF5282_QSPI_QMR_DOHIE (0x4000) -#define MCF5282_QSPI_QMR_BITS_16 (0x0000) -#define MCF5282_QSPI_QMR_BITS_8 (0x2000) -#define MCF5282_QSPI_QMR_BITS_9 (0x2400) -#define MCF5282_QSPI_QMR_BITS_10 (0x2800) -#define MCF5282_QSPI_QMR_BITS_11 (0x2C00) -#define MCF5282_QSPI_QMR_BITS_12 (0x3000) -#define MCF5282_QSPI_QMR_BITS_13 (0x3400) -#define MCF5282_QSPI_QMR_BITS_14 (0x3800) -#define MCF5282_QSPI_QMR_BITS_15 (0x3C00) -#define MCF5282_QSPI_QMR_CPOL (0x0200) -#define MCF5282_QSPI_QMR_CPHA (0x0100) -#define MCF5282_QSPI_QMR_BAUD(x) (((x)&0x00FF)) - -#define MCF5282_QSPI_QDLYR_SPE (0x80) -#define MCF5282_QSPI_QDLYR_QCD(x) (((x)&0x007F)<<8) -#define MCF5282_QSPI_QDLYR_DTL(x) (((x)&0x00FF)) - -#define MCF5282_QSPI_QWR_HALT (0x8000) -#define MCF5282_QSPI_QWR_WREN (0x4000) -#define MCF5282_QSPI_QWR_WRTO (0x2000) -#define MCF5282_QSPI_QWR_CSIV (0x1000) -#define MCF5282_QSPI_QWR_ENDQP(x) (((x)&0x000F)<<8) -#define MCF5282_QSPI_QWR_CPTQP(x) (((x)&0x000F)<<4) -#define MCF5282_QSPI_QWR_NEWQP(x) (((x)&0x000F)) - -#define MCF5282_QSPI_QIR_WCEFB (0x8000) -#define MCF5282_QSPI_QIR_ABRTB (0x4000) -#define MCF5282_QSPI_QIR_ABRTL (0x1000) -#define MCF5282_QSPI_QIR_WCEFE (0x0800) -#define MCF5282_QSPI_QIR_ABRTE (0x0400) -#define MCF5282_QSPI_QIR_SPIFE (0x0100) -#define MCF5282_QSPI_QIR_WCEF (0x0008) -#define MCF5282_QSPI_QIR_ABRT (0x0004) -#define MCF5282_QSPI_QIR_SPIF (0x0001) - -#define MCF5282_QSPI_QAR_ADDR(x) (((x)&0x003F)) - -#define MCF5282_QSPI_QDR_COMMAND(x) (((x)&0xFF00)) -#define MCF5282_QSPI_QCR_DATA(x) (((x)&0x00FF)<<8) -#define MCF5282_QSPI_QCR_CONT (0x8000) -#define MCF5282_QSPI_QCR_BITSE (0x4000) -#define MCF5282_QSPI_QCR_DT (0x2000) -#define MCF5282_QSPI_QCR_DSCK (0x1000) -#define MCF5282_QSPI_QCR_CS (((x)&0x000F)<<8) - -/****************************************************************************/ #endif /* m528xsim_h */ diff --git a/arch/m68k/include/asm/m532xsim.h b/arch/m68k/include/asm/m532xsim.h index 36bf15aec9a..c4bf1c81e3c 100644 --- a/arch/m68k/include/asm/m532xsim.h +++ b/arch/m68k/include/asm/m532xsim.h @@ -17,6 +17,7 @@ #define MCFINT_UART0 26 /* Interrupt number for UART0 */ #define MCFINT_UART1 27 /* Interrupt number for UART1 */ #define MCFINT_UART2 28 /* Interrupt number for UART2 */ +#define MCFINT_QSPI 31 /* Interrupt number for QSPI */ #define MCF_WTM_WCR MCF_REG16(0xFC098000) diff --git a/arch/m68k/include/asm/mcfqspi.h b/arch/m68k/include/asm/mcfqspi.h new file mode 100644 index 00000000000..39d90d51111 --- /dev/null +++ b/arch/m68k/include/asm/mcfqspi.h @@ -0,0 +1,64 @@ +/* + * Definitions for Freescale Coldfire QSPI module + * + * Copyright 2010 Steven King <sfking@fdwdc.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + * +*/ + +#ifndef mcfqspi_h +#define mcfqspi_h + +#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) +#define MCFQSPI_IOBASE (MCF_IPSBAR + 0x340) +#elif defined(CONFIG_M5249) +#define MCFQSPI_IOBASE (MCF_MBAR + 0x300) +#elif defined(CONFIG_M520x) || defined(CONFIG_M532x) +#define MCFQSPI_IOBASE 0xFC058000 +#endif +#define MCFQSPI_IOSIZE 0x40 + +/** + * struct mcfqspi_cs_control - chip select control for the coldfire qspi driver + * @setup: setup the control; allocate gpio's, etc. May be NULL. + * @teardown: finish with the control; free gpio's, etc. May be NULL. + * @select: output the signals to select the device. Can not be NULL. + * @deselect: output the signals to deselect the device. Can not be NULL. + * + * The QSPI module has 4 hardware chip selects. We don't use them. Instead + * platforms are required to supply a mcfqspi_cs_control as a part of the + * platform data for each QSPI master controller. Only the select and + * deselect functions are required. +*/ +struct mcfqspi_cs_control { + int (*setup)(struct mcfqspi_cs_control *); + void (*teardown)(struct mcfqspi_cs_control *); + void (*select)(struct mcfqspi_cs_control *, u8, bool); + void (*deselect)(struct mcfqspi_cs_control *, u8, bool); +}; + +/** + * struct mcfqspi_platform_data - platform data for the coldfire qspi driver + * @bus_num: board specific identifier for this qspi driver. + * @num_chipselects: number of chip selects supported by this qspi driver. + * @cs_control: platform dependent chip select control. +*/ +struct mcfqspi_platform_data { + s16 bus_num; + u16 num_chipselect; + struct mcfqspi_cs_control *cs_control; +}; + +#endif /* mcfqspi_h */ diff --git a/arch/m68k/include/asm/mcfsmc.h b/arch/m68k/include/asm/mcfsmc.h deleted file mode 100644 index 527bea5d678..00000000000 --- a/arch/m68k/include/asm/mcfsmc.h +++ /dev/null @@ -1,187 +0,0 @@ -/****************************************************************************/ - -/* - * mcfsmc.h -- SMC ethernet support for ColdFire environments. - * - * (C) Copyright 1999-2002, Greg Ungerer (gerg@snapgear.com) - * (C) Copyright 2000, Lineo Inc. (www.lineo.com) - */ - -/****************************************************************************/ -#ifndef mcfsmc_h -#define mcfsmc_h -/****************************************************************************/ - -/* - * None of the current ColdFire targets that use the SMC91x111 - * allow 8 bit accesses. So this code is 16bit access only. - */ - - -#undef outb -#undef inb -#undef outw -#undef outwd -#undef inw -#undef outl -#undef inl - -#undef outsb -#undef outsw -#undef outsl -#undef insb -#undef insw -#undef insl - -/* - * Re-defines for ColdFire environment... The SMC part is - * mapped into memory space, so remap the PC-style in/out - * routines to handle that. - */ -#define outb smc_outb -#define inb smc_inb -#define outw smc_outw -#define outwd smc_outwd -#define inw smc_inw -#define outl smc_outl -#define inl smc_inl - -#define outsb smc_outsb -#define outsw smc_outsw -#define outsl smc_outsl -#define insb smc_insb -#define insw smc_insw -#define insl smc_insl - - -static inline int smc_inb(unsigned int addr) -{ - register unsigned short w; - w = *((volatile unsigned short *) (addr & ~0x1)); - return(((addr & 0x1) ? w : (w >> 8)) & 0xff); -} - -static inline void smc_outw(unsigned int val, unsigned int addr) -{ - *((volatile unsigned short *) addr) = (val << 8) | (val >> 8); -} - -static inline int smc_inw(unsigned int addr) -{ - register unsigned short w; - w = *((volatile unsigned short *) addr); - return(((w << 8) | (w >> 8)) & 0xffff); -} - -static inline void smc_outl(unsigned long val, unsigned int addr) -{ - *((volatile unsigned long *) addr) = - ((val << 8) & 0xff000000) | ((val >> 8) & 0x00ff0000) | - ((val << 8) & 0x0000ff00) | ((val >> 8) & 0x000000ff); -} - -static inline void smc_outwd(unsigned int val, unsigned int addr) -{ - *((volatile unsigned short *) addr) = val; -} - - -/* - * The rep* functions are used to feed the data port with - * raw data. So we do not byte swap them when copying. - */ - -static inline void smc_insb(unsigned int addr, void *vbuf, int unsigned long len) -{ - volatile unsigned short *rp; - unsigned short *buf, *ebuf; - - buf = (unsigned short *) vbuf; - rp = (volatile unsigned short *) addr; - - /* Copy as words for as long as possible */ - for (ebuf = buf + (len >> 1); (buf < ebuf); ) - *buf++ = *rp; - - /* Lastly, handle left over byte */ - if (len & 0x1) - *((unsigned char *) buf) = (*rp >> 8) & 0xff; -} - -static inline void smc_insw(unsigned int addr, void *vbuf, unsigned long len) -{ - volatile unsigned short *rp; - unsigned short *buf, *ebuf; - - buf = (unsigned short *) vbuf; - rp = (volatile unsigned short *) addr; - for (ebuf = buf + len; (buf < ebuf); ) - *buf++ = *rp; -} - -static inline void smc_insl(unsigned int addr, void *vbuf, unsigned long len) -{ - volatile unsigned long *rp; - unsigned long *buf, *ebuf; - - buf = (unsigned long *) vbuf; - rp = (volatile unsigned long *) addr; - for (ebuf = buf + len; (buf < ebuf); ) - *buf++ = *rp; -} - -static inline void smc_outsw(unsigned int addr, const void *vbuf, unsigned long len) -{ - volatile unsigned short *rp; - unsigned short *buf, *ebuf; - - buf = (unsigned short *) vbuf; - rp = (volatile unsigned short *) addr; - for (ebuf = buf + len; (buf < ebuf); ) - *rp = *buf++; -} - -static inline void smc_outsl(unsigned int addr, void *vbuf, unsigned long len) -{ - volatile unsigned long *rp; - unsigned long *buf, *ebuf; - - buf = (unsigned long *) vbuf; - rp = (volatile unsigned long *) addr; - for (ebuf = buf + len; (buf < ebuf); ) - *rp = *buf++; -} - - -#ifdef CONFIG_NETtel -/* - * Re-map the address space of at least one of the SMC ethernet - * parts. Both parts power up decoding the same address, so we - * need to move one of them first, before doing enything else. - * - * We also increase the number of wait states for this part by one. - */ - -void smc_remap(unsigned int ioaddr) -{ - static int once = 0; - extern unsigned short ppdata; - if (once++ == 0) { - *((volatile unsigned short *)MCFSIM_PADDR) = 0x00ec; - ppdata |= 0x0080; - *((volatile unsigned short *)MCFSIM_PADAT) = ppdata; - outw(0x0001, ioaddr + BANK_SELECT); - outw(0x0001, ioaddr + BANK_SELECT); - outw(0x0067, ioaddr + BASE); - - ppdata &= ~0x0080; - *((volatile unsigned short *)MCFSIM_PADAT) = ppdata; - } - - *((volatile unsigned short *)(MCF_MBAR+MCFSIM_CSCR3)) = 0x1180; -} - -#endif - -/****************************************************************************/ -#endif /* mcfsmc_h */ diff --git a/arch/m68k/include/asm/param.h b/arch/m68k/include/asm/param.h index 85c41b75aa7..36265ccf5c7 100644 --- a/arch/m68k/include/asm/param.h +++ b/arch/m68k/include/asm/param.h @@ -1,26 +1,12 @@ #ifndef _M68K_PARAM_H #define _M68K_PARAM_H -#ifdef __KERNEL__ -# define HZ CONFIG_HZ /* Internal kernel timer frequency */ -# define USER_HZ 100 /* .. some user interfaces are in "ticks" */ -# define CLOCKS_PER_SEC (USER_HZ) /* like times() */ -#endif - -#ifndef HZ -#define HZ 100 -#endif - #ifdef __uClinux__ #define EXEC_PAGESIZE 4096 #else #define EXEC_PAGESIZE 8192 #endif -#ifndef NOGROUP -#define NOGROUP (-1) -#endif - -#define MAXHOSTNAMELEN 64 /* max length of hostname */ +#include <asm-generic/param.h> #endif /* _M68K_PARAM_H */ diff --git a/arch/m68k/include/asm/processor.h b/arch/m68k/include/asm/processor.h index cbd3d4751dd..7a6a7590cc0 100644 --- a/arch/m68k/include/asm/processor.h +++ b/arch/m68k/include/asm/processor.h @@ -44,11 +44,15 @@ static inline void wrusp(unsigned long usp) * User space process size: 3.75GB. This is hardcoded into a few places, * so don't change it unless you know what you are doing. */ +#ifdef CONFIG_MMU #ifndef CONFIG_SUN3 #define TASK_SIZE (0xF0000000UL) #else #define TASK_SIZE (0x0E000000UL) #endif +#else +#define TASK_SIZE (0xFFFFFFFFUL) +#endif #ifdef __KERNEL__ #define STACK_TOP TASK_SIZE diff --git a/arch/m68k/include/asm/scatterlist.h b/arch/m68k/include/asm/scatterlist.h index e27ad902b1c..175da06c6b9 100644 --- a/arch/m68k/include/asm/scatterlist.h +++ b/arch/m68k/include/asm/scatterlist.h @@ -1,23 +1,9 @@ #ifndef _M68K_SCATTERLIST_H #define _M68K_SCATTERLIST_H -#include <linux/types.h> - -struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif - unsigned long page_link; - unsigned int offset; - unsigned int length; - - dma_addr_t dma_address; /* A place to hang host-specific addresses at. */ -}; +#include <asm-generic/scatterlist.h> /* This is bogus and should go away. */ #define ISA_DMA_THRESHOLD (0x00ffffff) -#define sg_dma_address(sg) ((sg)->dma_address) -#define sg_dma_len(sg) ((sg)->length) - #endif /* !(_M68K_SCATTERLIST_H) */ diff --git a/arch/m68k/include/asm/thread_info_mm.h b/arch/m68k/include/asm/thread_info_mm.h index 67266c68345..3bf31dc51b1 100644 --- a/arch/m68k/include/asm/thread_info_mm.h +++ b/arch/m68k/include/asm/thread_info_mm.h @@ -65,7 +65,7 @@ struct thread_info { #define TIF_NEED_RESCHED 7 /* rescheduling necessary */ #define TIF_DELAYED_TRACE 14 /* single step a syscall */ #define TIF_SYSCALL_TRACE 15 /* syscall trace active */ -#define TIF_MEMDIE 16 +#define TIF_MEMDIE 16 /* is terminating due to OOM killer */ #define TIF_FREEZE 17 /* thread is freezing for suspend */ #endif /* _ASM_M68K_THREAD_INFO_H */ diff --git a/arch/m68k/include/asm/thread_info_no.h b/arch/m68k/include/asm/thread_info_no.h index 884776f686c..51f354b672e 100644 --- a/arch/m68k/include/asm/thread_info_no.h +++ b/arch/m68k/include/asm/thread_info_no.h @@ -85,7 +85,7 @@ static inline struct thread_info *current_thread_info(void) #define TIF_NEED_RESCHED 2 /* rescheduling necessary */ #define TIF_POLLING_NRFLAG 3 /* true if poll_idle() is polling TIF_NEED_RESCHED */ -#define TIF_MEMDIE 4 +#define TIF_MEMDIE 4 /* is terminating due to OOM killer */ #define TIF_FREEZE 16 /* is freezing for suspend */ /* as above, but as bit values */ diff --git a/arch/m68k/kernel/time.c b/arch/m68k/kernel/time.c index 17dc2a31a7c..4926b3856c1 100644 --- a/arch/m68k/kernel/time.c +++ b/arch/m68k/kernel/time.c @@ -73,21 +73,24 @@ static irqreturn_t timer_interrupt(int irq, void *dummy) return IRQ_HANDLED; } -void __init time_init(void) +void read_persistent_clock(struct timespec *ts) { struct rtc_time time; + ts->tv_sec = 0; + ts->tv_nsec = 0; if (mach_hwclk) { mach_hwclk(0, &time); if ((time.tm_year += 1900) < 1970) time.tm_year += 100; - xtime.tv_sec = mktime(time.tm_year, time.tm_mon, time.tm_mday, + ts->tv_sec = mktime(time.tm_year, time.tm_mon, time.tm_mday, time.tm_hour, time.tm_min, time.tm_sec); - xtime.tv_nsec = 0; } - wall_to_monotonic.tv_sec = -xtime.tv_sec; +} +void __init time_init(void) +{ mach_sched_init(timer_interrupt); } diff --git a/arch/m68k/kernel/traps.c b/arch/m68k/kernel/traps.c index aacd6d17b83..ada4f4cca81 100644 --- a/arch/m68k/kernel/traps.c +++ b/arch/m68k/kernel/traps.c @@ -455,7 +455,7 @@ static inline void access_error040(struct frame *fp) if (do_page_fault(&fp->ptregs, addr, errorcode)) { #ifdef DEBUG - printk("do_page_fault() !=0 \n"); + printk("do_page_fault() !=0\n"); #endif if (user_mode(&fp->ptregs)){ /* delay writebacks after signal delivery */ diff --git a/arch/m68k/mac/config.c b/arch/m68k/mac/config.c index 0356da9bf76..1c16b1baf8d 100644 --- a/arch/m68k/mac/config.c +++ b/arch/m68k/mac/config.c @@ -148,7 +148,7 @@ static void mac_cache_card_flush(int writeback) void __init config_mac(void) { if (!MACH_IS_MAC) - printk(KERN_ERR "ERROR: no Mac, but config_mac() called!! \n"); + printk(KERN_ERR "ERROR: no Mac, but config_mac() called!!\n"); mach_sched_init = mac_sched_init; mach_init_IRQ = mac_init_IRQ; @@ -867,7 +867,7 @@ static void __init mac_identify(void) */ iop_preinit(); - printk(KERN_INFO "Detected Macintosh model: %d \n", model); + printk(KERN_INFO "Detected Macintosh model: %d\n", model); /* * Report booter data: @@ -878,12 +878,12 @@ static void __init mac_identify(void) mac_bi_data.videoaddr, mac_bi_data.videorow, mac_bi_data.videodepth, mac_bi_data.dimensions & 0xFFFF, mac_bi_data.dimensions >> 16); - printk(KERN_DEBUG " Videological 0x%lx phys. 0x%lx, SCC at 0x%lx \n", + printk(KERN_DEBUG " Videological 0x%lx phys. 0x%lx, SCC at 0x%lx\n", mac_bi_data.videological, mac_orig_videoaddr, mac_bi_data.sccbase); - printk(KERN_DEBUG " Boottime: 0x%lx GMTBias: 0x%lx \n", + printk(KERN_DEBUG " Boottime: 0x%lx GMTBias: 0x%lx\n", mac_bi_data.boottime, mac_bi_data.gmtbias); - printk(KERN_DEBUG " Machine ID: %ld CPUid: 0x%lx memory size: 0x%lx \n", + printk(KERN_DEBUG " Machine ID: %ld CPUid: 0x%lx memory size: 0x%lx\n", mac_bi_data.id, mac_bi_data.cpuid, mac_bi_data.memsize); iop_init(); diff --git a/arch/m68k/mm/fault.c b/arch/m68k/mm/fault.c index d0e35cf99fc..a96394a0333 100644 --- a/arch/m68k/mm/fault.c +++ b/arch/m68k/mm/fault.c @@ -154,7 +154,6 @@ good_area: * the fault. */ - survive: fault = handle_mm_fault(mm, vma, address, write ? FAULT_FLAG_WRITE : 0); #ifdef DEBUG printk("handle_mm_fault returns %d\n",fault); @@ -180,15 +179,10 @@ good_area: */ out_of_memory: up_read(&mm->mmap_sem); - if (is_global_init(current)) { - yield(); - down_read(&mm->mmap_sem); - goto survive; - } - - printk("VM: killing process %s\n", current->comm); - if (user_mode(regs)) - do_group_exit(SIGKILL); + if (!user_mode(regs)) + goto no_context; + pagefault_out_of_memory(); + return 0; no_context: current->thread.signo = SIGBUS; diff --git a/arch/m68k/mvme16x/rtc.c b/arch/m68k/mvme16x/rtc.c index 8da9c250d3e..11ac6f63967 100644 --- a/arch/m68k/mvme16x/rtc.c +++ b/arch/m68k/mvme16x/rtc.c @@ -9,7 +9,6 @@ #include <linux/types.h> #include <linux/errno.h> #include <linux/miscdevice.h> -#include <linux/smp_lock.h> #include <linux/ioport.h> #include <linux/capability.h> #include <linux/fcntl.h> @@ -36,8 +35,7 @@ static const unsigned char days_in_mo[] = static atomic_t rtc_ready = ATOMIC_INIT(1); -static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) +static long rtc_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { volatile MK48T08ptr_t rtc = (MK48T08ptr_t)MVME_RTC_BASE; unsigned long flags; @@ -120,22 +118,15 @@ static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd, } /* - * We enforce only one user at a time here with the open/close. - * Also clear the previous interrupt data on an open, and clean - * up things on a close. + * We enforce only one user at a time here with the open/close. */ - static int rtc_open(struct inode *inode, struct file *file) { - lock_kernel(); if( !atomic_dec_and_test(&rtc_ready) ) { atomic_inc( &rtc_ready ); - unlock_kernel(); return -EBUSY; } - unlock_kernel(); - return 0; } @@ -150,9 +141,9 @@ static int rtc_release(struct inode *inode, struct file *file) */ static const struct file_operations rtc_fops = { - .ioctl = rtc_ioctl, - .open = rtc_open, - .release = rtc_release, + .unlocked_ioctl = rtc_ioctl, + .open = rtc_open, + .release = rtc_release, }; static struct miscdevice rtc_dev= diff --git a/arch/m68k/q40/config.c b/arch/m68k/q40/config.c index 31ab3f08bbd..ad10fecec2f 100644 --- a/arch/m68k/q40/config.c +++ b/arch/m68k/q40/config.c @@ -126,7 +126,7 @@ static void q40_reset(void) { halted = 1; printk("\n\n*******************************************\n" - "Called q40_reset : press the RESET button!! \n" + "Called q40_reset : press the RESET button!!\n" "*******************************************\n"); Q40_LED_ON(); while (1) |