diff options
Diffstat (limited to 'arch/m68knommu/Kconfig')
| -rw-r--r-- | arch/m68knommu/Kconfig | 844 |
1 files changed, 0 insertions, 844 deletions
diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig deleted file mode 100644 index b5424cf948e..00000000000 --- a/arch/m68knommu/Kconfig +++ /dev/null @@ -1,844 +0,0 @@ -config M68K - bool - default y - select HAVE_IDE - select HAVE_GENERIC_HARDIRQS - select GENERIC_HARDIRQS_NO_DEPRECATED - -config MMU - bool - default n - -config NO_DMA - bool - depends on !COLDFIRE - default y - -config FPU - bool - default n - -config ZONE_DMA - bool - default y - -config RWSEM_GENERIC_SPINLOCK - bool - default y - -config RWSEM_XCHGADD_ALGORITHM - bool - default n - -config ARCH_HAS_ILOG2_U32 - bool - default n - -config ARCH_HAS_ILOG2_U64 - bool - default n - -config GENERIC_FIND_NEXT_BIT - bool - default y - -config GENERIC_GPIO - bool - default n - -config GENERIC_HWEIGHT - bool - default y - -config GENERIC_CALIBRATE_DELAY - bool - default y - -config GENERIC_CMOS_UPDATE - bool - default y - -config TIME_LOW_RES - bool - default y - -config GENERIC_CLOCKEVENTS - bool - default n - -config NO_IOPORT - def_bool y - -config COLDFIRE_SW_A7 - bool - default n - -config HAVE_CACHE_SPLIT - bool - -config HAVE_CACHE_CB - bool - -config HAVE_MBAR - bool - -config HAVE_IPSBAR - bool - -source "init/Kconfig" - -source "kernel/Kconfig.freezer" - -menu "Processor type and features" - -choice - prompt "CPU" - default M68EZ328 - -config M68328 - bool "MC68328" - help - Motorola 68328 processor support. - -config M68EZ328 - bool "MC68EZ328" - help - Motorola 68EX328 processor support. - -config M68VZ328 - bool "MC68VZ328" - help - Motorola 68VZ328 processor support. - -config M68360 - bool "MC68360" - help - Motorola 68360 processor support. - -config M5206 - bool "MCF5206" - select COLDFIRE_SW_A7 - select HAVE_MBAR - help - Motorola ColdFire 5206 processor support. - -config M5206e - bool "MCF5206e" - select COLDFIRE_SW_A7 - select HAVE_MBAR - help - Motorola ColdFire 5206e processor support. - -config M520x - bool "MCF520x" - select GENERIC_CLOCKEVENTS - select HAVE_CACHE_SPLIT - help - Freescale Coldfire 5207/5208 processor support. - -config M523x - bool "MCF523x" - select GENERIC_CLOCKEVENTS - select HAVE_CACHE_SPLIT - select HAVE_IPSBAR - help - Freescale Coldfire 5230/1/2/4/5 processor support - -config M5249 - bool "MCF5249" - select COLDFIRE_SW_A7 - select HAVE_MBAR - help - Motorola ColdFire 5249 processor support. - -config M5271 - bool "MCF5271" - select HAVE_CACHE_SPLIT - select HAVE_IPSBAR - help - Freescale (Motorola) ColdFire 5270/5271 processor support. - -config M5272 - bool "MCF5272" - select COLDFIRE_SW_A7 - select HAVE_MBAR - help - Motorola ColdFire 5272 processor support. - -config M5275 - bool "MCF5275" - select HAVE_CACHE_SPLIT - select HAVE_IPSBAR - help - Freescale (Motorola) ColdFire 5274/5275 processor support. - -config M528x - bool "MCF528x" - select GENERIC_CLOCKEVENTS - select HAVE_CACHE_SPLIT - select HAVE_IPSBAR - help - Motorola ColdFire 5280/5282 processor support. - -config M5307 - bool "MCF5307" - select COLDFIRE_SW_A7 - select HAVE_CACHE_CB - select HAVE_MBAR - help - Motorola ColdFire 5307 processor support. - -config M532x - bool "MCF532x" - select HAVE_CACHE_CB - help - Freescale (Motorola) ColdFire 532x processor support. - -config M5407 - bool "MCF5407" - select COLDFIRE_SW_A7 - select HAVE_CACHE_CB - select HAVE_MBAR - help - Motorola ColdFire 5407 processor support. - -config M547x - bool "MCF547x" - select HAVE_CACHE_CB - select HAVE_MBAR - help - Freescale ColdFire 5470/5471/5472/5473/5474/5475 processor support. - -config M548x - bool "MCF548x" - select HAVE_CACHE_CB - select HAVE_MBAR - help - Freescale ColdFire 5480/5481/5482/5483/5484/5485 processor support. - -endchoice - -config M527x - bool - depends on (M5271 || M5275) - select GENERIC_CLOCKEVENTS - default y - -config M54xx - bool - depends on (M548x || M547x) - default y - -config COLDFIRE - bool - depends on (M5206 || M5206e || M520x || M523x || M5249 || M527x || M5272 || M528x || M5307 || M532x || M5407 || M54xx) - select GENERIC_GPIO - select ARCH_REQUIRE_GPIOLIB - default y - -config CLOCK_SET - bool "Enable setting the CPU clock frequency" - default n - help - On some CPU's you do not need to know what the core CPU clock - frequency is. On these you can disable clock setting. On some - traditional 68K parts, and on all ColdFire parts you need to set - the appropriate CPU clock frequency. On these devices many of the - onboard peripherals derive their timing from the master CPU clock - frequency. - -config CLOCK_FREQ - int "Set the core clock frequency" - default "66666666" - depends on CLOCK_SET - help - Define the CPU clock frequency in use. This is the core clock - frequency, it may or may not be the same as the external clock - crystal fitted to your board. Some processors have an internal - PLL and can have their frequency programmed at run time, others - use internal dividers. In general the kernel won't setup a PLL - if it is fitted (there are some exceptions). This value will be - specific to the exact CPU that you are using. - -config OLDMASK - bool "Old mask 5307 (1H55J) silicon" - depends on M5307 - help - Build support for the older revision ColdFire 5307 silicon. - Specifically this is the 1H55J mask revision. - -if HAVE_CACHE_SPLIT -choice - prompt "Split Cache Configuration" - default CACHE_I - -config CACHE_I - bool "Instruction" - help - Use all of the ColdFire CPU cache memory as an instruction cache. - -config CACHE_D - bool "Data" - help - Use all of the ColdFire CPU cache memory as a data cache. - -config CACHE_BOTH - bool "Both" - help - Split the ColdFire CPU cache, and use half as an instruction cache - and half as a data cache. -endchoice -endif - -if HAVE_CACHE_CB -choice - prompt "Data cache mode" - default CACHE_WRITETHRU - -config CACHE_WRITETHRU - bool "Write-through" - help - The ColdFire CPU cache is set into Write-through mode. - -config CACHE_COPYBACK - bool "Copy-back" - help - The ColdFire CPU cache is set into Copy-back mode. -endchoice -endif - -comment "Platform" - -config PILOT3 - bool "Pilot 1000/5000, PalmPilot Personal/Pro, or PalmIII support" - depends on M68328 - help - Support for the Palm Pilot 1000/5000, Personal/Pro and PalmIII. - -config XCOPILOT_BUGS - bool "(X)Copilot support" - depends on PILOT3 - help - Support the bugs of Xcopilot. - -config UC5272 - bool 'Arcturus Networks uC5272 dimm board support' - depends on M5272 - help - Support for the Arcturus Networks uC5272 dimm board. - -config UC5282 - bool "Arcturus Networks uC5282 board support" - depends on M528x - help - Support for the Arcturus Networks uC5282 dimm board. - -config UCSIMM - bool "uCsimm module support" - depends on M68EZ328 - help - Support for the Arcturus Networks uCsimm module. - -config UCDIMM - bool "uDsimm module support" - depends on M68VZ328 - help - Support for the Arcturus Networks uDsimm module. - -config DRAGEN2 - bool "DragenEngine II board support" - depends on M68VZ328 - help - Support for the DragenEngine II board. - -config DIRECT_IO_ACCESS - bool "Allow user to access IO directly" - depends on (UCSIMM || UCDIMM || DRAGEN2) - help - Disable the CPU internal registers protection in user mode, - to allow a user application to read/write them. - -config INIT_LCD - bool "Initialize LCD" - depends on (UCSIMM || UCDIMM || DRAGEN2) - help - Initialize the LCD controller of the 68x328 processor. - -config MEMORY_RESERVE - int "Memory reservation (MiB)" - depends on (UCSIMM || UCDIMM) - help - Reserve certain memory regions on 68x328 based boards. - -config UCQUICC - bool "Lineo uCquicc board support" - depends on M68360 - help - Support for the Lineo uCquicc board. - -config ARN5206 - bool "Arnewsh 5206 board support" - depends on M5206 - help - Support for the Arnewsh 5206 board. - -config M5206eC3 - bool "Motorola M5206eC3 board support" - depends on M5206e - help - Support for the Motorola M5206eC3 board. - -config ELITE - bool "Motorola M5206eLITE board support" - depends on M5206e - help - Support for the Motorola M5206eLITE board. - -config M5208EVB - bool "Freescale M5208EVB board support" - depends on M520x - help - Support for the Freescale Coldfire M5208EVB. - -config M5235EVB - bool "Freescale M5235EVB support" - depends on M523x - help - Support for the Freescale M5235EVB board. - -config M5249C3 - bool "Motorola M5249C3 board support" - depends on M5249 - help - Support for the Motorola M5249C3 board. - -config M5271EVB - bool "Freescale (Motorola) M5271EVB board support" - depends on M5271 - help - Support for the Freescale (Motorola) M5271EVB board. - -config M5275EVB - bool "Freescale (Motorola) M5275EVB board support" - depends on M5275 - help - Support for the Freescale (Motorola) M5275EVB board. - -config M5272C3 - bool "Motorola M5272C3 board support" - depends on M5272 - help - Support for the Motorola M5272C3 board. - -config COBRA5272 - bool "senTec COBRA5272 board support" - depends on M5272 - help - Support for the senTec COBRA5272 board. - -config AVNET5282 - bool "Avnet 5282 board support" - depends on M528x - help - Support for the Avnet 5282 board. - -config M5282EVB - bool "Motorola M5282EVB board support" - depends on M528x - help - Support for the Motorola M5282EVB board. - -config COBRA5282 - bool "senTec COBRA5282 board support" - depends on M528x - help - Support for the senTec COBRA5282 board. - -config SOM5282EM - bool "EMAC.Inc SOM5282EM board support" - depends on M528x - help - Support for the EMAC.Inc SOM5282EM module. - -config WILDFIRE - bool "Intec Automation Inc. WildFire board support" - depends on M528x - help - Support for the Intec Automation Inc. WildFire. - -config WILDFIREMOD - bool "Intec Automation Inc. WildFire module support" - depends on M528x - help - Support for the Intec Automation Inc. WildFire module. - -config ARN5307 - bool "Arnewsh 5307 board support" - depends on M5307 - help - Support for the Arnewsh 5307 board. - -config M5307C3 - bool "Motorola M5307C3 board support" - depends on M5307 - help - Support for the Motorola M5307C3 board. - -config SECUREEDGEMP3 - bool "SnapGear SecureEdge/MP3 platform support" - depends on M5307 - help - Support for the SnapGear SecureEdge/MP3 platform. - -config M5329EVB - bool "Freescale (Motorola) M5329EVB board support" - depends on M532x - help - Support for the Freescale (Motorola) M5329EVB board. - -config COBRA5329 - bool "senTec COBRA5329 board support" - depends on M532x - help - Support for the senTec COBRA5329 board. - -config M5407C3 - bool "Motorola M5407C3 board support" - depends on M5407 - help - Support for the Motorola M5407C3 board. - -config FIREBEE - bool "FireBee board support" - depends on M547x - help - Support for the FireBee ColdFire 5475 based board. - -config CLEOPATRA - bool "Feith CLEOPATRA board support" - depends on (M5307 || M5407) - help - Support for the Feith Cleopatra boards. - -config CANCam - bool "Feith CANCam board support" - depends on M5272 - help - Support for the Feith CANCam board. - -config SCALES - bool "Feith SCALES board support" - depends on M5272 - help - Support for the Feith SCALES board. - -config NETtel - bool "SecureEdge/NETtel board support" - depends on (M5206e || M5272 || M5307) - help - Support for the SnapGear NETtel/SecureEdge/SnapGear boards. - -config SNAPGEAR - bool "SnapGear router board support" - depends on NETtel - help - Special additional support for SnapGear router boards. - -config CPU16B - bool "Sneha Technologies S.L. Sarasvati board support" - depends on M5272 - help - Support for the SNEHA CPU16B board. - -config MOD5272 - bool "Netburner MOD-5272 board support" - depends on M5272 - help - Support for the Netburner MOD-5272 board. - -config SAVANTrosie1 - bool "Savant Rosie1 board support" - depends on M523x - help - Support for the Savant Rosie1 board. - -config ROMFS_FROM_ROM - bool "ROMFS image not RAM resident" - depends on (NETtel || SNAPGEAR) - help - The ROMfs filesystem will stay resident in the FLASH/ROM, not be - moved into RAM. - -config PILOT - bool - default y - depends on (PILOT3 || PILOT5) - -config ARNEWSH - bool - default y - depends on (ARN5206 || ARN5307) - -config FREESCALE - bool - default y - depends on (M5206eC3 || M5208EVB || M5235EVB || M5249C3 || M5271EVB || M5272C3 || M5275EVB || M5282EVB || M5307C3 || M5329EVB || M5407C3) - -config HW_FEITH - bool - default y - depends on (CLEOPATRA || CANCam || SCALES) - -config senTec - bool - default y - depends on (COBRA5272 || COBRA5282) - -config EMAC_INC - bool - default y - depends on (SOM5282EM) - -config SNEHA - bool - default y - depends on CPU16B - -config SAVANT - bool - default y - depends on SAVANTrosie1 - -config AVNET - bool - default y - depends on (AVNET5282) - -config UBOOT - bool "Support for U-Boot command line parameters" - help - If you say Y here kernel will try to collect command - line parameters from the initial u-boot stack. - default n - -config 4KSTACKS - bool "Use 4Kb for kernel stacks instead of 8Kb" - default y - help - If you say Y here the kernel will use a 4Kb stacksize for the - kernel stack attached to each process/thread. This facilitates - running more threads on a system and also reduces the pressure - on the VM subsystem for higher order allocations. - -config HZ - int - default 1000 if CLEOPATRA - default 100 - -comment "RAM configuration" - -config RAMBASE - hex "Address of the base of RAM" - default "0" - help - Define the address that RAM starts at. On many platforms this is - 0, the base of the address space. And this is the default. Some - platforms choose to setup their RAM at other addresses within the - processor address space. - -config RAMSIZE - hex "Size of RAM (in bytes), or 0 for automatic" - default "0x400000" - help - Define the size of the system RAM. If you select 0 then the - kernel will try to probe the RAM size at runtime. This is not - supported on all CPU types. - -config VECTORBASE - hex "Address of the base of system vectors" - default "0" - help - Define the address of the system vectors. Commonly this is - put at the start of RAM, but it doesn't have to be. On ColdFire - platforms this address is programmed into the VBR register, thus - actually setting the address to use. - -config MBAR - hex "Address of the MBAR (internal peripherals)" - default "0x10000000" - depends on HAVE_MBAR - help - Define the address of the internal system peripherals. This value - is set in the processors MBAR register. This is generally setup by - the boot loader, and will not be written by the kernel. By far most - ColdFire boards use the default 0x10000000 value, so if unsure then - use this. - -config IPSBAR - hex "Address of the IPSBAR (internal peripherals)" - default "0x40000000" - depends on HAVE_IPSBAR - help - Define the address of the internal system peripherals. This value - is set in the processors IPSBAR register. This is generally setup by - the boot loader, and will not be written by the kernel. By far most - ColdFire boards use the default 0x40000000 value, so if unsure then - use this. - -config KERNELBASE - hex "Address of the base of kernel code" - default "0x400" - help - Typically on m68k systems the kernel will not start at the base - of RAM, but usually some small offset from it. Define the start - address of the kernel here. The most common setup will have the - processor vectors at the base of RAM and then the start of the - kernel. On some platforms some RAM is reserved for boot loaders - and the kernel starts after that. The 0x400 default was based on - a system with the RAM based at address 0, and leaving enough room - for the theoretical maximum number of 256 vectors. - -choice - prompt "RAM bus width" - default RAMAUTOBIT - -config RAMAUTOBIT - bool "AUTO" - help - Select the physical RAM data bus size. Not needed on most platforms, - so you can generally choose AUTO. - -config RAM8BIT - bool "8bit" - help - Configure RAM bus to be 8 bits wide. - -config RAM16BIT - bool "16bit" - help - Configure RAM bus to be 16 bits wide. - -config RAM32BIT - bool "32bit" - help - Configure RAM bus to be 32 bits wide. - -endchoice - -comment "ROM configuration" - -config ROM - bool "Specify ROM linker regions" - default n - help - Define a ROM region for the linker script. This creates a kernel - that can be stored in flash, with possibly the text, and data - regions being copied out to RAM at startup. - -config ROMBASE - hex "Address of the base of ROM device" - default "0" - depends on ROM - help - Define the address that the ROM region starts at. Some platforms - use this to set their chip select region accordingly for the boot - device. - -config ROMVEC - hex "Address of the base of the ROM vectors" - default "0" - depends on ROM - help - This is almost always the same as the base of the ROM. Since on all - 68000 type variants the vectors are at the base of the boot device - on system startup. - -config ROMVECSIZE - hex "Size of ROM vector region (in bytes)" - default "0x400" - depends on ROM - help - Define the size of the vector region in ROM. For most 68000 - variants this would be 0x400 bytes in size. Set to 0 if you do - not want a vector region at the start of the ROM. - -config ROMSTART - hex "Address of the base of system image in ROM" - default "0x400" - depends on ROM - help - Define the start address of the system image in ROM. Commonly this - is strait after the ROM vectors. - -config ROMSIZE - hex "Size of the ROM device" - default "0x100000" - depends on ROM - help - Size of the ROM device. On some platforms this is used to setup - the chip select that controls the boot ROM device. - -choice - prompt "Kernel executes from" - ---help--- - Choose the memory type that the kernel will be running in. - -config RAMKERNEL - bool "RAM" - help - The kernel will be resident in RAM when running. - -config ROMKERNEL - bool "ROM" - help - The kernel will be resident in FLASH/ROM when running. This is - often referred to as Execute-in-Place (XIP), since the kernel - code executes from the position it is stored in the FLASH/ROM. - -endchoice - -if COLDFIRE -source "kernel/Kconfig.preempt" -endif - -source "kernel/time/Kconfig" - -source "mm/Kconfig" - -endmenu - -config ISA_DMA_API - bool - depends on !M5272 - default y - -source "drivers/pcmcia/Kconfig" - -menu "Executable file formats" - -source "fs/Kconfig.binfmt" - -endmenu - -menu "Power management options" - -config PM - bool "Power Management support" - help - Support processor power management modes - -endmenu - -source "net/Kconfig" - -source "drivers/Kconfig" - -source "fs/Kconfig" - -source "arch/m68knommu/Kconfig.debug" - -source "security/Kconfig" - -source "crypto/Kconfig" - -source "lib/Kconfig" |