diff options
Diffstat (limited to 'arch/m68knommu/include/asm')
139 files changed, 0 insertions, 15838 deletions
diff --git a/arch/m68knommu/include/asm/Kbuild b/arch/m68knommu/include/asm/Kbuild deleted file mode 100644 index 58c02a45413..00000000000 --- a/arch/m68knommu/include/asm/Kbuild +++ /dev/null @@ -1,3 +0,0 @@ -include include/asm-generic/Kbuild.asm - -unifdef-y += swab.h diff --git a/arch/m68knommu/include/asm/MC68328.h b/arch/m68knommu/include/asm/MC68328.h deleted file mode 100644 index a337e56d09b..00000000000 --- a/arch/m68knommu/include/asm/MC68328.h +++ /dev/null @@ -1,1266 +0,0 @@ - -/* include/asm-m68knommu/MC68328.h: '328 control registers - * - * Copyright (C) 1999 Vladimir Gurevich <vgurevic@cisco.com> - * Bear & Hare Software, Inc. - * - * Based on include/asm-m68knommu/MC68332.h - * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>, - * - */ - -#ifndef _MC68328_H_ -#define _MC68328_H_ - -#define BYTE_REF(addr) (*((volatile unsigned char*)addr)) -#define WORD_REF(addr) (*((volatile unsigned short*)addr)) -#define LONG_REF(addr) (*((volatile unsigned long*)addr)) - -#define PUT_FIELD(field, val) (((val) << field##_SHIFT) & field##_MASK) -#define GET_FIELD(reg, field) (((reg) & field##_MASK) >> field##_SHIFT) - -/********** - * - * 0xFFFFF0xx -- System Control - * - **********/ - -/* - * System Control Register (SCR) - */ -#define SCR_ADDR 0xfffff000 -#define SCR BYTE_REF(SCR_ADDR) - -#define SCR_WDTH8 0x01 /* 8-Bit Width Select */ -#define SCR_DMAP 0x04 /* Double Map */ -#define SCR_SO 0x08 /* Supervisor Only */ -#define SCR_BETEN 0x10 /* Bus-Error Time-Out Enable */ -#define SCR_PRV 0x20 /* Privilege Violation */ -#define SCR_WPV 0x40 /* Write Protect Violation */ -#define SCR_BETO 0x80 /* Bus-Error TimeOut */ - -/* - * Mask Revision Register - */ -#define MRR_ADDR 0xfffff004 -#define MRR LONG_REF(MRR_ADDR) - -/********** - * - * 0xFFFFF1xx -- Chip-Select logic - * - **********/ - -/********** - * - * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control - * - **********/ - -/* - * Group Base Address Registers - */ -#define GRPBASEA_ADDR 0xfffff100 -#define GRPBASEB_ADDR 0xfffff102 -#define GRPBASEC_ADDR 0xfffff104 -#define GRPBASED_ADDR 0xfffff106 - -#define GRPBASEA WORD_REF(GRPBASEA_ADDR) -#define GRPBASEB WORD_REF(GRPBASEB_ADDR) -#define GRPBASEC WORD_REF(GRPBASEC_ADDR) -#define GRPBASED WORD_REF(GRPBASED_ADDR) - -#define GRPBASE_V 0x0001 /* Valid */ -#define GRPBASE_GBA_MASK 0xfff0 /* Group Base Address (bits 31-20) */ - -/* - * Group Base Address Mask Registers - */ -#define GRPMASKA_ADDR 0xfffff108 -#define GRPMASKB_ADDR 0xfffff10a -#define GRPMASKC_ADDR 0xfffff10c -#define GRPMASKD_ADDR 0xfffff10e - -#define GRPMASKA WORD_REF(GRPMASKA_ADDR) -#define GRPMASKB WORD_REF(GRPMASKB_ADDR) -#define GRPMASKC WORD_REF(GRPMASKC_ADDR) -#define GRPMASKD WORD_REF(GRPMASKD_ADDR) - -#define GRMMASK_GMA_MASK 0xfffff0 /* Group Base Mask (bits 31-20) */ - -/* - * Chip-Select Option Registers (group A) - */ -#define CSA0_ADDR 0xfffff110 -#define CSA1_ADDR 0xfffff114 -#define CSA2_ADDR 0xfffff118 -#define CSA3_ADDR 0xfffff11c - -#define CSA0 LONG_REF(CSA0_ADDR) -#define CSA1 LONG_REF(CSA1_ADDR) -#define CSA2 LONG_REF(CSA2_ADDR) -#define CSA3 LONG_REF(CSA3_ADDR) - -#define CSA_WAIT_MASK 0x00000007 /* Wait State Selection */ -#define CSA_WAIT_SHIFT 0 -#define CSA_RO 0x00000008 /* Read-Only */ -#define CSA_AM_MASK 0x0000ff00 /* Address Mask (bits 23-16) */ -#define CSA_AM_SHIFT 8 -#define CSA_BUSW 0x00010000 /* Bus Width Select */ -#define CSA_AC_MASK 0xff000000 /* Address Compare (bits 23-16) */ -#define CSA_AC_SHIFT 24 - -/* - * Chip-Select Option Registers (group B) - */ -#define CSB0_ADDR 0xfffff120 -#define CSB1_ADDR 0xfffff124 -#define CSB2_ADDR 0xfffff128 -#define CSB3_ADDR 0xfffff12c - -#define CSB0 LONG_REF(CSB0_ADDR) -#define CSB1 LONG_REF(CSB1_ADDR) -#define CSB2 LONG_REF(CSB2_ADDR) -#define CSB3 LONG_REF(CSB3_ADDR) - -#define CSB_WAIT_MASK 0x00000007 /* Wait State Selection */ -#define CSB_WAIT_SHIFT 0 -#define CSB_RO 0x00000008 /* Read-Only */ -#define CSB_AM_MASK 0x0000ff00 /* Address Mask (bits 23-16) */ -#define CSB_AM_SHIFT 8 -#define CSB_BUSW 0x00010000 /* Bus Width Select */ -#define CSB_AC_MASK 0xff000000 /* Address Compare (bits 23-16) */ -#define CSB_AC_SHIFT 24 - -/* - * Chip-Select Option Registers (group C) - */ -#define CSC0_ADDR 0xfffff130 -#define CSC1_ADDR 0xfffff134 -#define CSC2_ADDR 0xfffff138 -#define CSC3_ADDR 0xfffff13c - -#define CSC0 LONG_REF(CSC0_ADDR) -#define CSC1 LONG_REF(CSC1_ADDR) -#define CSC2 LONG_REF(CSC2_ADDR) -#define CSC3 LONG_REF(CSC3_ADDR) - -#define CSC_WAIT_MASK 0x00000007 /* Wait State Selection */ -#define CSC_WAIT_SHIFT 0 -#define CSC_RO 0x00000008 /* Read-Only */ -#define CSC_AM_MASK 0x0000fff0 /* Address Mask (bits 23-12) */ -#define CSC_AM_SHIFT 4 -#define CSC_BUSW 0x00010000 /* Bus Width Select */ -#define CSC_AC_MASK 0xfff00000 /* Address Compare (bits 23-12) */ -#define CSC_AC_SHIFT 20 - -/* - * Chip-Select Option Registers (group D) - */ -#define CSD0_ADDR 0xfffff140 -#define CSD1_ADDR 0xfffff144 -#define CSD2_ADDR 0xfffff148 -#define CSD3_ADDR 0xfffff14c - -#define CSD0 LONG_REF(CSD0_ADDR) -#define CSD1 LONG_REF(CSD1_ADDR) -#define CSD2 LONG_REF(CSD2_ADDR) -#define CSD3 LONG_REF(CSD3_ADDR) - -#define CSD_WAIT_MASK 0x00000007 /* Wait State Selection */ -#define CSD_WAIT_SHIFT 0 -#define CSD_RO 0x00000008 /* Read-Only */ -#define CSD_AM_MASK 0x0000fff0 /* Address Mask (bits 23-12) */ -#define CSD_AM_SHIFT 4 -#define CSD_BUSW 0x00010000 /* Bus Width Select */ -#define CSD_AC_MASK 0xfff00000 /* Address Compare (bits 23-12) */ -#define CSD_AC_SHIFT 20 - -/********** - * - * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control - * - **********/ - -/* - * PLL Control Register - */ -#define PLLCR_ADDR 0xfffff200 -#define PLLCR WORD_REF(PLLCR_ADDR) - -#define PLLCR_DISPLL 0x0008 /* Disable PLL */ -#define PLLCR_CLKEN 0x0010 /* Clock (CLKO pin) enable */ -#define PLLCR_SYSCLK_SEL_MASK 0x0700 /* System Clock Selection */ -#define PLLCR_SYSCLK_SEL_SHIFT 8 -#define PLLCR_PIXCLK_SEL_MASK 0x3800 /* LCD Clock Selection */ -#define PLLCR_PIXCLK_SEL_SHIFT 11 - -/* 'EZ328-compatible definitions */ -#define PLLCR_LCDCLK_SEL_MASK PLLCR_PIXCLK_SEL_MASK -#define PLLCR_LCDCLK_SEL_SHIFT PLLCR_PIXCLK_SEL_SHIFT - -/* - * PLL Frequency Select Register - */ -#define PLLFSR_ADDR 0xfffff202 -#define PLLFSR WORD_REF(PLLFSR_ADDR) - -#define PLLFSR_PC_MASK 0x00ff /* P Count */ -#define PLLFSR_PC_SHIFT 0 -#define PLLFSR_QC_MASK 0x0f00 /* Q Count */ -#define PLLFSR_QC_SHIFT 8 -#define PLLFSR_PROT 0x4000 /* Protect P & Q */ -#define PLLFSR_CLK32 0x8000 /* Clock 32 (kHz) */ - -/* - * Power Control Register - */ -#define PCTRL_ADDR 0xfffff207 -#define PCTRL BYTE_REF(PCTRL_ADDR) - -#define PCTRL_WIDTH_MASK 0x1f /* CPU Clock bursts width */ -#define PCTRL_WIDTH_SHIFT 0 -#define PCTRL_STOP 0x40 /* Enter power-save mode immediately */ -#define PCTRL_PCEN 0x80 /* Power Control Enable */ - -/********** - * - * 0xFFFFF3xx -- Interrupt Controller - * - **********/ - -/* - * Interrupt Vector Register - */ -#define IVR_ADDR 0xfffff300 -#define IVR BYTE_REF(IVR_ADDR) - -#define IVR_VECTOR_MASK 0xF8 - -/* - * Interrupt control Register - */ -#define ICR_ADRR 0xfffff302 -#define ICR WORD_REF(ICR_ADDR) - -#define ICR_ET6 0x0100 /* Edge Trigger Select for IRQ6 */ -#define ICR_ET3 0x0200 /* Edge Trigger Select for IRQ3 */ -#define ICR_ET2 0x0400 /* Edge Trigger Select for IRQ2 */ -#define ICR_ET1 0x0800 /* Edge Trigger Select for IRQ1 */ -#define ICR_POL6 0x1000 /* Polarity Control for IRQ6 */ -#define ICR_POL3 0x2000 /* Polarity Control for IRQ3 */ -#define ICR_POL2 0x4000 /* Polarity Control for IRQ2 */ -#define ICR_POL1 0x8000 /* Polarity Control for IRQ1 */ - -/* - * Interrupt Mask Register - */ -#define IMR_ADDR 0xfffff304 -#define IMR LONG_REF(IMR_ADDR) - -/* - * Define the names for bit positions first. This is useful for - * request_irq - */ -#define SPIM_IRQ_NUM 0 /* SPI Master interrupt */ -#define TMR2_IRQ_NUM 1 /* Timer 2 interrupt */ -#define UART_IRQ_NUM 2 /* UART interrupt */ -#define WDT_IRQ_NUM 3 /* Watchdog Timer interrupt */ -#define RTC_IRQ_NUM 4 /* RTC interrupt */ -#define KB_IRQ_NUM 6 /* Keyboard Interrupt */ -#define PWM_IRQ_NUM 7 /* Pulse-Width Modulator int. */ -#define INT0_IRQ_NUM 8 /* External INT0 */ -#define INT1_IRQ_NUM 9 /* External INT1 */ -#define INT2_IRQ_NUM 10 /* External INT2 */ -#define INT3_IRQ_NUM 11 /* External INT3 */ -#define INT4_IRQ_NUM 12 /* External INT4 */ -#define INT5_IRQ_NUM 13 /* External INT5 */ -#define INT6_IRQ_NUM 14 /* External INT6 */ -#define INT7_IRQ_NUM 15 /* External INT7 */ -#define IRQ1_IRQ_NUM 16 /* IRQ1 */ -#define IRQ2_IRQ_NUM 17 /* IRQ2 */ -#define IRQ3_IRQ_NUM 18 /* IRQ3 */ -#define IRQ6_IRQ_NUM 19 /* IRQ6 */ -#define PEN_IRQ_NUM 20 /* Pen Interrupt */ -#define SPIS_IRQ_NUM 21 /* SPI Slave Interrupt */ -#define TMR1_IRQ_NUM 22 /* Timer 1 interrupt */ -#define IRQ7_IRQ_NUM 23 /* IRQ7 */ - -/* '328-compatible definitions */ -#define SPI_IRQ_NUM SPIM_IRQ_NUM -#define TMR_IRQ_NUM TMR1_IRQ_NUM - -/* - * Here go the bitmasks themselves - */ -#define IMR_MSPIM (1 << SPIM _IRQ_NUM) /* Mask SPI Master interrupt */ -#define IMR_MTMR2 (1 << TMR2_IRQ_NUM) /* Mask Timer 2 interrupt */ -#define IMR_MUART (1 << UART_IRQ_NUM) /* Mask UART interrupt */ -#define IMR_MWDT (1 << WDT_IRQ_NUM) /* Mask Watchdog Timer interrupt */ -#define IMR_MRTC (1 << RTC_IRQ_NUM) /* Mask RTC interrupt */ -#define IMR_MKB (1 << KB_IRQ_NUM) /* Mask Keyboard Interrupt */ -#define IMR_MPWM (1 << PWM_IRQ_NUM) /* Mask Pulse-Width Modulator int. */ -#define IMR_MINT0 (1 << INT0_IRQ_NUM) /* Mask External INT0 */ -#define IMR_MINT1 (1 << INT1_IRQ_NUM) /* Mask External INT1 */ -#define IMR_MINT2 (1 << INT2_IRQ_NUM) /* Mask External INT2 */ -#define IMR_MINT3 (1 << INT3_IRQ_NUM) /* Mask External INT3 */ -#define IMR_MINT4 (1 << INT4_IRQ_NUM) /* Mask External INT4 */ -#define IMR_MINT5 (1 << INT5_IRQ_NUM) /* Mask External INT5 */ -#define IMR_MINT6 (1 << INT6_IRQ_NUM) /* Mask External INT6 */ -#define IMR_MINT7 (1 << INT7_IRQ_NUM) /* Mask External INT7 */ -#define IMR_MIRQ1 (1 << IRQ1_IRQ_NUM) /* Mask IRQ1 */ -#define IMR_MIRQ2 (1 << IRQ2_IRQ_NUM) /* Mask IRQ2 */ -#define IMR_MIRQ3 (1 << IRQ3_IRQ_NUM) /* Mask IRQ3 */ -#define IMR_MIRQ6 (1 << IRQ6_IRQ_NUM) /* Mask IRQ6 */ -#define IMR_MPEN (1 << PEN_IRQ_NUM) /* Mask Pen Interrupt */ -#define IMR_MSPIS (1 << SPIS_IRQ_NUM) /* Mask SPI Slave Interrupt */ -#define IMR_MTMR1 (1 << TMR1_IRQ_NUM) /* Mask Timer 1 interrupt */ -#define IMR_MIRQ7 (1 << IRQ7_IRQ_NUM) /* Mask IRQ7 */ - -/* 'EZ328-compatible definitions */ -#define IMR_MSPI IMR_MSPIM -#define IMR_MTMR IMR_MTMR1 - -/* - * Interrupt Wake-Up Enable Register - */ -#define IWR_ADDR 0xfffff308 -#define IWR LONG_REF(IWR_ADDR) - -#define IWR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */ -#define IWR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */ -#define IWR_UART (1 << UART_IRQ_NUM) /* UART interrupt */ -#define IWR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */ -#define IWR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */ -#define IWR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */ -#define IWR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator int. */ -#define IWR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */ -#define IWR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */ -#define IWR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */ -#define IWR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */ -#define IWR_INT4 (1 << INT4_IRQ_NUM) /* External INT4 */ -#define IWR_INT5 (1 << INT5_IRQ_NUM) /* External INT5 */ -#define IWR_INT6 (1 << INT6_IRQ_NUM) /* External INT6 */ -#define IWR_INT7 (1 << INT7_IRQ_NUM) /* External INT7 */ -#define IWR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */ -#define IWR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */ -#define IWR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */ -#define IWR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */ -#define IWR_PEN (1 << PEN_IRQ_NUM) /* Pen Interrupt */ -#define IWR_SPIS (1 << SPIS_IRQ_NUM) /* SPI Slave Interrupt */ -#define IWR_TMR1 (1 << TMR1_IRQ_NUM) /* Timer 1 interrupt */ -#define IWR_IRQ7 (1 << IRQ7_IRQ_NUM) /* IRQ7 */ - -/* - * Interrupt Status Register - */ -#define ISR_ADDR 0xfffff30c -#define ISR LONG_REF(ISR_ADDR) - -#define ISR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */ -#define ISR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */ -#define ISR_UART (1 << UART_IRQ_NUM) /* UART interrupt */ -#define ISR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */ -#define ISR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */ -#define ISR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */ -#define ISR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator int. */ -#define ISR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */ -#define ISR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */ -#define ISR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */ -#define ISR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */ -#define ISR_INT4 (1 << INT4_IRQ_NUM) /* External INT4 */ -#define ISR_INT5 (1 << INT5_IRQ_NUM) /* External INT5 */ -#define ISR_INT6 (1 << INT6_IRQ_NUM) /* External INT6 */ -#define ISR_INT7 (1 << INT7_IRQ_NUM) /* External INT7 */ -#define ISR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */ -#define ISR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */ -#define ISR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */ -#define ISR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */ -#define ISR_PEN (1 << PEN_IRQ_NUM) /* Pen Interrupt */ -#define ISR_SPIS (1 << SPIS_IRQ_NUM) /* SPI Slave Interrupt */ -#define ISR_TMR1 (1 << TMR1_IRQ_NUM) /* Timer 1 interrupt */ -#define ISR_IRQ7 (1 << IRQ7_IRQ_NUM) /* IRQ7 */ - -/* 'EZ328-compatible definitions */ -#define ISR_SPI ISR_SPIM -#define ISR_TMR ISR_TMR1 - -/* - * Interrupt Pending Register - */ -#define IPR_ADDR 0xfffff310 -#define IPR LONG_REF(IPR_ADDR) - -#define IPR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */ -#define IPR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */ -#define IPR_UART (1 << UART_IRQ_NUM) /* UART interrupt */ -#define IPR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */ -#define IPR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */ -#define IPR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */ -#define IPR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator int. */ -#define IPR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */ -#define IPR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */ -#define IPR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */ -#define IPR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */ -#define IPR_INT4 (1 << INT4_IRQ_NUM) /* External INT4 */ -#define IPR_INT5 (1 << INT5_IRQ_NUM) /* External INT5 */ -#define IPR_INT6 (1 << INT6_IRQ_NUM) /* External INT6 */ -#define IPR_INT7 (1 << INT7_IRQ_NUM) /* External INT7 */ -#define IPR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */ -#define IPR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */ -#define IPR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */ -#define IPR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */ -#define IPR_PEN (1 << PEN_IRQ_NUM) /* Pen Interrupt */ -#define IPR_SPIS (1 << SPIS_IRQ_NUM) /* SPI Slave Interrupt */ -#define IPR_TMR1 (1 << TMR1_IRQ_NUM) /* Timer 1 interrupt */ -#define IPR_IRQ7 (1 << IRQ7_IRQ_NUM) /* IRQ7 */ - -/* 'EZ328-compatible definitions */ -#define IPR_SPI IPR_SPIM -#define IPR_TMR IPR_TMR1 - -/********** - * - * 0xFFFFF4xx -- Parallel Ports - * - **********/ - -/* - * Port A - */ -#define PADIR_ADDR 0xfffff400 /* Port A direction reg */ -#define PADATA_ADDR 0xfffff401 /* Port A data register */ -#define PASEL_ADDR 0xfffff403 /* Port A Select register */ - -#define PADIR BYTE_REF(PADIR_ADDR) -#define PADATA BYTE_REF(PADATA_ADDR) -#define PASEL BYTE_REF(PASEL_ADDR) - -#define PA(x) (1 << (x)) -#define PA_A(x) PA((x) - 16) /* This is specific to PA only! */ - -#define PA_A16 PA(0) /* Use A16 as PA(0) */ -#define PA_A17 PA(1) /* Use A17 as PA(1) */ -#define PA_A18 PA(2) /* Use A18 as PA(2) */ -#define PA_A19 PA(3) /* Use A19 as PA(3) */ -#define PA_A20 PA(4) /* Use A20 as PA(4) */ -#define PA_A21 PA(5) /* Use A21 as PA(5) */ -#define PA_A22 PA(6) /* Use A22 as PA(6) */ -#define PA_A23 PA(7) /* Use A23 as PA(7) */ - -/* - * Port B - */ -#define PBDIR_ADDR 0xfffff408 /* Port B direction reg */ -#define PBDATA_ADDR 0xfffff409 /* Port B data register */ -#define PBSEL_ADDR 0xfffff40b /* Port B Select Register */ - -#define PBDIR BYTE_REF(PBDIR_ADDR) -#define PBDATA BYTE_REF(PBDATA_ADDR) -#define PBSEL BYTE_REF(PBSEL_ADDR) - -#define PB(x) (1 << (x)) -#define PB_D(x) PB(x) /* This is specific to port B only */ - -#define PB_D0 PB(0) /* Use D0 as PB(0) */ -#define PB_D1 PB(1) /* Use D1 as PB(1) */ -#define PB_D2 PB(2) /* Use D2 as PB(2) */ -#define PB_D3 PB(3) /* Use D3 as PB(3) */ -#define PB_D4 PB(4) /* Use D4 as PB(4) */ -#define PB_D5 PB(5) /* Use D5 as PB(5) */ -#define PB_D6 PB(6) /* Use D6 as PB(6) */ -#define PB_D7 PB(7) /* Use D7 as PB(7) */ - -/* - * Port C - */ -#define PCDIR_ADDR 0xfffff410 /* Port C direction reg */ -#define PCDATA_ADDR 0xfffff411 /* Port C data register */ -#define PCSEL_ADDR 0xfffff413 /* Port C Select Register */ - -#define PCDIR BYTE_REF(PCDIR_ADDR) -#define PCDATA BYTE_REF(PCDATA_ADDR) -#define PCSEL BYTE_REF(PCSEL_ADDR) - -#define PC(x) (1 << (x)) - -#define PC_WE PC(6) /* Use WE as PC(6) */ -#define PC_DTACK PC(5) /* Use DTACK as PC(5) */ -#define PC_IRQ7 PC(4) /* Use IRQ7 as PC(4) */ -#define PC_LDS PC(2) /* Use LDS as PC(2) */ -#define PC_UDS PC(1) /* Use UDS as PC(1) */ -#define PC_MOCLK PC(0) /* Use MOCLK as PC(0) */ - -/* - * Port D - */ -#define PDDIR_ADDR 0xfffff418 /* Port D direction reg */ -#define PDDATA_ADDR 0xfffff419 /* Port D data register */ -#define PDPUEN_ADDR 0xfffff41a /* Port D Pull-Up enable reg */ -#define PDPOL_ADDR 0xfffff41c /* Port D Polarity Register */ -#define PDIRQEN_ADDR 0xfffff41d /* Port D IRQ enable register */ -#define PDIQEG_ADDR 0xfffff41f /* Port D IRQ Edge Register */ - -#define PDDIR BYTE_REF(PDDIR_ADDR) -#define PDDATA BYTE_REF(PDDATA_ADDR) -#define PDPUEN BYTE_REF(PDPUEN_ADDR) -#define PDPOL BYTE_REF(PDPOL_ADDR) -#define PDIRQEN BYTE_REF(PDIRQEN_ADDR) -#define PDIQEG BYTE_REF(PDIQEG_ADDR) - -#define PD(x) (1 << (x)) -#define PD_KB(x) PD(x) /* This is specific for Port D only */ - -#define PD_KB0 PD(0) /* Use KB0 as PD(0) */ -#define PD_KB1 PD(1) /* Use KB1 as PD(1) */ -#define PD_KB2 PD(2) /* Use KB2 as PD(2) */ -#define PD_KB3 PD(3) /* Use KB3 as PD(3) */ -#define PD_KB4 PD(4) /* Use KB4 as PD(4) */ -#define PD_KB5 PD(5) /* Use KB5 as PD(5) */ -#define PD_KB6 PD(6) /* Use KB6 as PD(6) */ -#define PD_KB7 PD(7) /* Use KB7 as PD(7) */ - -/* - * Port E - */ -#define PEDIR_ADDR 0xfffff420 /* Port E direction reg */ -#define PEDATA_ADDR 0xfffff421 /* Port E data register */ -#define PEPUEN_ADDR 0xfffff422 /* Port E Pull-Up enable reg */ -#define PESEL_ADDR 0xfffff423 /* Port E Select Register */ - -#define PEDIR BYTE_REF(PEDIR_ADDR) -#define PEDATA BYTE_REF(PEDATA_ADDR) -#define PEPUEN BYTE_REF(PEPUEN_ADDR) -#define PESEL BYTE_REF(PESEL_ADDR) - -#define PE(x) (1 << (x)) - -#define PE_CSA1 PE(1) /* Use CSA1 as PE(1) */ -#define PE_CSA2 PE(2) /* Use CSA2 as PE(2) */ -#define PE_CSA3 PE(3) /* Use CSA3 as PE(3) */ -#define PE_CSB0 PE(4) /* Use CSB0 as PE(4) */ -#define PE_CSB1 PE(5) /* Use CSB1 as PE(5) */ -#define PE_CSB2 PE(6) /* Use CSB2 as PE(6) */ -#define PE_CSB3 PE(7) /* Use CSB3 as PE(7) */ - -/* - * Port F - */ -#define PFDIR_ADDR 0xfffff428 /* Port F direction reg */ -#define PFDATA_ADDR 0xfffff429 /* Port F data register */ -#define PFPUEN_ADDR 0xfffff42a /* Port F Pull-Up enable reg */ -#define PFSEL_ADDR 0xfffff42b /* Port F Select Register */ - -#define PFDIR BYTE_REF(PFDIR_ADDR) -#define PFDATA BYTE_REF(PFDATA_ADDR) -#define PFPUEN BYTE_REF(PFPUEN_ADDR) -#define PFSEL BYTE_REF(PFSEL_ADDR) - -#define PF(x) (1 << (x)) -#define PF_A(x) PF((x) - 24) /* This is Port F specific only */ - -#define PF_A24 PF(0) /* Use A24 as PF(0) */ -#define PF_A25 PF(1) /* Use A25 as PF(1) */ -#define PF_A26 PF(2) /* Use A26 as PF(2) */ -#define PF_A27 PF(3) /* Use A27 as PF(3) */ -#define PF_A28 PF(4) /* Use A28 as PF(4) */ -#define PF_A29 PF(5) /* Use A29 as PF(5) */ -#define PF_A30 PF(6) /* Use A30 as PF(6) */ -#define PF_A31 PF(7) /* Use A31 as PF(7) */ - -/* - * Port G - */ -#define PGDIR_ADDR 0xfffff430 /* Port G direction reg */ -#define PGDATA_ADDR 0xfffff431 /* Port G data register */ -#define PGPUEN_ADDR 0xfffff432 /* Port G Pull-Up enable reg */ -#define PGSEL_ADDR 0xfffff433 /* Port G Select Register */ - -#define PGDIR BYTE_REF(PGDIR_ADDR) -#define PGDATA BYTE_REF(PGDATA_ADDR) -#define PGPUEN BYTE_REF(PGPUEN_ADDR) -#define PGSEL BYTE_REF(PGSEL_ADDR) - -#define PG(x) (1 << (x)) - -#define PG_UART_TXD PG(0) /* Use UART_TXD as PG(0) */ -#define PG_UART_RXD PG(1) /* Use UART_RXD as PG(1) */ -#define PG_PWMOUT PG(2) /* Use PWMOUT as PG(2) */ -#define PG_TOUT2 PG(3) /* Use TOUT2 as PG(3) */ -#define PG_TIN2 PG(4) /* Use TIN2 as PG(4) */ -#define PG_TOUT1 PG(5) /* Use TOUT1 as PG(5) */ -#define PG_TIN1 PG(6) /* Use TIN1 as PG(6) */ -#define PG_RTCOUT PG(7) /* Use RTCOUT as PG(7) */ - -/* - * Port J - */ -#define PJDIR_ADDR 0xfffff438 /* Port J direction reg */ -#define PJDATA_ADDR 0xfffff439 /* Port J data register */ -#define PJSEL_ADDR 0xfffff43b /* Port J Select Register */ - -#define PJDIR BYTE_REF(PJDIR_ADDR) -#define PJDATA BYTE_REF(PJDATA_ADDR) -#define PJSEL BYTE_REF(PJSEL_ADDR) - -#define PJ(x) (1 << (x)) - -#define PJ_CSD3 PJ(7) /* Use CSD3 as PJ(7) */ - -/* - * Port K - */ -#define PKDIR_ADDR 0xfffff440 /* Port K direction reg */ -#define PKDATA_ADDR 0xfffff441 /* Port K data register */ -#define PKPUEN_ADDR 0xfffff442 /* Port K Pull-Up enable reg */ -#define PKSEL_ADDR 0xfffff443 /* Port K Select Register */ - -#define PKDIR BYTE_REF(PKDIR_ADDR) -#define PKDATA BYTE_REF(PKDATA_ADDR) -#define PKPUEN BYTE_REF(PKPUEN_ADDR) -#define PKSEL BYTE_REF(PKSEL_ADDR) - -#define PK(x) (1 << (x)) - -/* - * Port M - */ -#define PMDIR_ADDR 0xfffff438 /* Port M direction reg */ -#define PMDATA_ADDR 0xfffff439 /* Port M data register */ -#define PMPUEN_ADDR 0xfffff43a /* Port M Pull-Up enable reg */ -#define PMSEL_ADDR 0xfffff43b /* Port M Select Register */ - -#define PMDIR BYTE_REF(PMDIR_ADDR) -#define PMDATA BYTE_REF(PMDATA_ADDR) -#define PMPUEN BYTE_REF(PMPUEN_ADDR) -#define PMSEL BYTE_REF(PMSEL_ADDR) - -#define PM(x) (1 << (x)) - -/********** - * - * 0xFFFFF5xx -- Pulse-Width Modulator (PWM) - * - **********/ - -/* - * PWM Control Register - */ -#define PWMC_ADDR 0xfffff500 -#define PWMC WORD_REF(PWMC_ADDR) - -#define PWMC_CLKSEL_MASK 0x0007 /* Clock Selection */ -#define PWMC_CLKSEL_SHIFT 0 -#define PWMC_PWMEN 0x0010 /* Enable PWM */ -#define PMNC_POL 0x0020 /* PWM Output Bit Polarity */ -#define PWMC_PIN 0x0080 /* Current PWM output pin status */ -#define PWMC_LOAD 0x0100 /* Force a new period */ -#define PWMC_IRQEN 0x4000 /* Interrupt Request Enable */ -#define PWMC_CLKSRC 0x8000 /* Clock Source Select */ - -/* 'EZ328-compatible definitions */ -#define PWMC_EN PWMC_PWMEN - -/* - * PWM Period Register - */ -#define PWMP_ADDR 0xfffff502 -#define PWMP WORD_REF(PWMP_ADDR) - -/* - * PWM Width Register - */ -#define PWMW_ADDR 0xfffff504 -#define PWMW WORD_REF(PWMW_ADDR) - -/* - * PWM Counter Register - */ -#define PWMCNT_ADDR 0xfffff506 -#define PWMCNT WORD_REF(PWMCNT_ADDR) - -/********** - * - * 0xFFFFF6xx -- General-Purpose Timers - * - **********/ - -/* - * Timer Unit 1 and 2 Control Registers - */ -#define TCTL1_ADDR 0xfffff600 -#define TCTL1 WORD_REF(TCTL1_ADDR) -#define TCTL2_ADDR 0xfffff60c -#define TCTL2 WORD_REF(TCTL2_ADDR) - -#define TCTL_TEN 0x0001 /* Timer Enable */ -#define TCTL_CLKSOURCE_MASK 0x000e /* Clock Source: */ -#define TCTL_CLKSOURCE_STOP 0x0000 /* Stop count (disabled) */ -#define TCTL_CLKSOURCE_SYSCLK 0x0002 /* SYSCLK to prescaler */ -#define TCTL_CLKSOURCE_SYSCLK_16 0x0004 /* SYSCLK/16 to prescaler */ -#define TCTL_CLKSOURCE_TIN 0x0006 /* TIN to prescaler */ -#define TCTL_CLKSOURCE_32KHZ 0x0008 /* 32kHz clock to prescaler */ -#define TCTL_IRQEN 0x0010 /* IRQ Enable */ -#define TCTL_OM 0x0020 /* Output Mode */ -#define TCTL_CAP_MASK 0x00c0 /* Capture Edge: */ -#define TCTL_CAP_RE 0x0040 /* Capture on rizing edge */ -#define TCTL_CAP_FE 0x0080 /* Capture on falling edge */ -#define TCTL_FRR 0x0010 /* Free-Run Mode */ - -/* 'EZ328-compatible definitions */ -#define TCTL_ADDR TCTL1_ADDR -#define TCTL TCTL1 - -/* - * Timer Unit 1 and 2 Prescaler Registers - */ -#define TPRER1_ADDR 0xfffff602 -#define TPRER1 WORD_REF(TPRER1_ADDR) -#define TPRER2_ADDR 0xfffff60e -#define TPRER2 WORD_REF(TPRER2_ADDR) - -/* 'EZ328-compatible definitions */ -#define TPRER_ADDR TPRER1_ADDR -#define TPRER TPRER1 - -/* - * Timer Unit 1 and 2 Compare Registers - */ -#define TCMP1_ADDR 0xfffff604 -#define TCMP1 WORD_REF(TCMP1_ADDR) -#define TCMP2_ADDR 0xfffff610 -#define TCMP2 WORD_REF(TCMP2_ADDR) - -/* 'EZ328-compatible definitions */ -#define TCMP_ADDR TCMP1_ADDR -#define TCMP TCMP1 - -/* - * Timer Unit 1 and 2 Capture Registers - */ -#define TCR1_ADDR 0xfffff606 -#define TCR1 WORD_REF(TCR1_ADDR) -#define TCR2_ADDR 0xfffff612 -#define TCR2 WORD_REF(TCR2_ADDR) - -/* 'EZ328-compatible definitions */ -#define TCR_ADDR TCR1_ADDR -#define TCR TCR1 - -/* - * Timer Unit 1 and 2 Counter Registers - */ -#define TCN1_ADDR 0xfffff608 -#define TCN1 WORD_REF(TCN1_ADDR) -#define TCN2_ADDR 0xfffff614 -#define TCN2 WORD_REF(TCN2_ADDR) - -/* 'EZ328-compatible definitions */ -#define TCN_ADDR TCN1_ADDR -#define TCN TCN - -/* - * Timer Unit 1 and 2 Status Registers - */ -#define TSTAT1_ADDR 0xfffff60a -#define TSTAT1 WORD_REF(TSTAT1_ADDR) -#define TSTAT2_ADDR 0xfffff616 -#define TSTAT2 WORD_REF(TSTAT2_ADDR) - -#define TSTAT_COMP 0x0001 /* Compare Event occurred */ -#define TSTAT_CAPT 0x0001 /* Capture Event occurred */ - -/* 'EZ328-compatible definitions */ -#define TSTAT_ADDR TSTAT1_ADDR -#define TSTAT TSTAT1 - -/* - * Watchdog Compare Register - */ -#define WRR_ADDR 0xfffff61a -#define WRR WORD_REF(WRR_ADDR) - -/* - * Watchdog Counter Register - */ -#define WCN_ADDR 0xfffff61c -#define WCN WORD_REF(WCN_ADDR) - -/* - * Watchdog Control and Status Register - */ -#define WCSR_ADDR 0xfffff618 -#define WCSR WORD_REF(WCSR_ADDR) - -#define WCSR_WDEN 0x0001 /* Watchdog Enable */ -#define WCSR_FI 0x0002 /* Forced Interrupt (instead of SW reset)*/ -#define WCSR_WRST 0x0004 /* Watchdog Reset */ - -/********** - * - * 0xFFFFF7xx -- Serial Periferial Interface Slave (SPIS) - * - **********/ - -/* - * SPI Slave Register - */ -#define SPISR_ADDR 0xfffff700 -#define SPISR WORD_REF(SPISR_ADDR) - -#define SPISR_DATA_ADDR 0xfffff701 -#define SPISR_DATA BYTE_REF(SPISR_DATA_ADDR) - -#define SPISR_DATA_MASK 0x00ff /* Shifted data from the external device */ -#define SPISR_DATA_SHIFT 0 -#define SPISR_SPISEN 0x0100 /* SPIS module enable */ -#define SPISR_POL 0x0200 /* SPSCLK polarity control */ -#define SPISR_PHA 0x0400 /* Phase relationship between SPSCLK & SPSRxD */ -#define SPISR_OVWR 0x0800 /* Data buffer has been overwritten */ -#define SPISR_DATARDY 0x1000 /* Data ready */ -#define SPISR_ENPOL 0x2000 /* Enable Polarity */ -#define SPISR_IRQEN 0x4000 /* SPIS IRQ Enable */ -#define SPISR_SPISIRQ 0x8000 /* SPIS IRQ posted */ - -/********** - * - * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM) - * - **********/ - -/* - * SPIM Data Register - */ -#define SPIMDATA_ADDR 0xfffff800 -#define SPIMDATA WORD_REF(SPIMDATA_ADDR) - -/* - * SPIM Control/Status Register - */ -#define SPIMCONT_ADDR 0xfffff802 -#define SPIMCONT WORD_REF(SPIMCONT_ADDR) - -#define SPIMCONT_BIT_COUNT_MASK 0x000f /* Transfer Length in Bytes */ -#define SPIMCONT_BIT_COUNT_SHIFT 0 -#define SPIMCONT_POL 0x0010 /* SPMCLK Signel Polarity */ -#define SPIMCONT_PHA 0x0020 /* Clock/Data phase relationship */ -#define SPIMCONT_IRQEN 0x0040 /* IRQ Enable */ -#define SPIMCONT_SPIMIRQ 0x0080 /* Interrupt Request */ -#define SPIMCONT_XCH 0x0100 /* Exchange */ -#define SPIMCONT_RSPIMEN 0x0200 /* Enable SPIM */ -#define SPIMCONT_DATA_RATE_MASK 0xe000 /* SPIM Data Rate */ -#define SPIMCONT_DATA_RATE_SHIFT 13 - -/* 'EZ328-compatible definitions */ -#define SPIMCONT_IRQ SPIMCONT_SPIMIRQ -#define SPIMCONT_ENABLE SPIMCONT_SPIMEN -/********** - * - * 0xFFFFF9xx -- UART - * - **********/ - -/* - * UART Status/Control Register - */ -#define USTCNT_ADDR 0xfffff900 -#define USTCNT WORD_REF(USTCNT_ADDR) - -#define USTCNT_TXAVAILEN 0x0001 /* Transmitter Available Int Enable */ -#define USTCNT_TXHALFEN 0x0002 /* Transmitter Half Empty Int Enable */ -#define USTCNT_TXEMPTYEN 0x0004 /* Transmitter Empty Int Enable */ -#define USTCNT_RXREADYEN 0x0008 /* Receiver Ready Interrupt Enable */ -#define USTCNT_RXHALFEN 0x0010 /* Receiver Half-Full Int Enable */ -#define USTCNT_RXFULLEN 0x0020 /* Receiver Full Interrupt Enable */ -#define USTCNT_CTSDELTAEN 0x0040 /* CTS Delta Interrupt Enable */ -#define USTCNT_GPIODELTAEN 0x0080 /* Old Data Interrupt Enable */ -#define USTCNT_8_7 0x0100 /* Eight or seven-bit transmission */ -#define USTCNT_STOP 0x0200 /* Stop bit transmission */ -#define USTCNT_ODD_EVEN 0x0400 /* Odd Parity */ -#define USTCNT_PARITYEN 0x0800 /* Parity Enable */ -#define USTCNT_CLKMODE 0x1000 /* Clock Mode Select */ -#define USTCNT_TXEN 0x2000 /* Transmitter Enable */ -#define USTCNT_RXEN 0x4000 /* Receiver Enable */ -#define USTCNT_UARTEN 0x8000 /* UART Enable */ - -/* 'EZ328-compatible definitions */ -#define USTCNT_TXAE USTCNT_TXAVAILEN -#define USTCNT_TXHE USTCNT_TXHALFEN -#define USTCNT_TXEE USTCNT_TXEMPTYEN -#define USTCNT_RXRE USTCNT_RXREADYEN -#define USTCNT_RXHE USTCNT_RXHALFEN -#define USTCNT_RXFE USTCNT_RXFULLEN -#define USTCNT_CTSD USTCNT_CTSDELTAEN -#define USTCNT_ODD USTCNT_ODD_EVEN -#define USTCNT_PEN USTCNT_PARITYEN -#define USTCNT_CLKM USTCNT_CLKMODE -#define USTCNT_UEN USTCNT_UARTEN - -/* - * UART Baud Control Register - */ -#define UBAUD_ADDR 0xfffff902 -#define UBAUD WORD_REF(UBAUD_ADDR) - -#define UBAUD_PRESCALER_MASK 0x003f /* Actual divisor is 65 - PRESCALER */ -#define UBAUD_PRESCALER_SHIFT 0 -#define UBAUD_DIVIDE_MASK 0x0700 /* Baud Rate freq. divizor */ -#define UBAUD_DIVIDE_SHIFT 8 -#define UBAUD_BAUD_SRC 0x0800 /* Baud Rate Source */ -#define UBAUD_GPIOSRC 0x1000 /* GPIO source */ -#define UBAUD_GPIODIR 0x2000 /* GPIO Direction */ -#define UBAUD_GPIO 0x4000 /* Current GPIO pin status */ -#define UBAUD_GPIODELTA 0x8000 /* GPIO pin value changed */ - -/* - * UART Receiver Register - */ -#define URX_ADDR 0xfffff904 -#define URX WORD_REF(URX_ADDR) - -#define URX_RXDATA_ADDR 0xfffff905 -#define URX_RXDATA BYTE_REF(URX_RXDATA_ADDR) - -#define URX_RXDATA_MASK 0x00ff /* Received data */ -#define URX_RXDATA_SHIFT 0 -#define URX_PARITY_ERROR 0x0100 /* Parity Error */ -#define URX_BREAK 0x0200 /* Break Detected */ -#define URX_FRAME_ERROR 0x0400 /* Framing Error */ -#define URX_OVRUN 0x0800 /* Serial Overrun */ -#define URX_DATA_READY 0x2000 /* Data Ready (FIFO not empty) */ -#define URX_FIFO_HALF 0x4000 /* FIFO is Half-Full */ -#define URX_FIFO_FULL 0x8000 /* FIFO is Full */ - -/* - * UART Transmitter Register - */ -#define UTX_ADDR 0xfffff906 -#define UTX WORD_REF(UTX_ADDR) - -#define UTX_TXDATA_ADDR 0xfffff907 -#define UTX_TXDATA BYTE_REF(UTX_TXDATA_ADDR) - -#define UTX_TXDATA_MASK 0x00ff /* Data to be transmitted */ -#define UTX_TXDATA_SHIFT 0 -#define UTX_CTS_DELTA 0x0100 /* CTS changed */ -#define UTX_CTS_STATUS 0x0200 /* CTS State */ -#define UTX_IGNORE_CTS 0x0800 /* Ignore CTS */ -#define UTX_SEND_BREAK 0x1000 /* Send a BREAK */ -#define UTX_TX_AVAIL 0x2000 /* Transmit FIFO has a slot available */ -#define UTX_FIFO_HALF 0x4000 /* Transmit FIFO is half empty */ -#define UTX_FIFO_EMPTY 0x8000 /* Transmit FIFO is empty */ - -/* 'EZ328-compatible definitions */ -#define UTX_CTS_STAT UTX_CTS_STATUS -#define UTX_NOCTS UTX_IGNORE_CTS - -/* - * UART Miscellaneous Register - */ -#define UMISC_ADDR 0xfffff908 -#define UMISC WORD_REF(UMISC_ADDR) - -#define UMISC_TX_POL 0x0004 /* Transmit Polarity */ -#define UMISC_RX_POL 0x0008 /* Receive Polarity */ -#define UMISC_IRDA_LOOP 0x0010 /* IrDA Loopback Enable */ -#define UMISC_IRDA_EN 0x0020 /* Infra-Red Enable */ -#define UMISC_RTS 0x0040 /* Set RTS status */ -#define UMISC_RTSCONT 0x0080 /* Choose RTS control */ -#define UMISC_LOOP 0x1000 /* Serial Loopback Enable */ -#define UMISC_FORCE_PERR 0x2000 /* Force Parity Error */ -#define UMISC_CLKSRC 0x4000 /* Clock Source */ - - -/* generalization of uart control registers to support multiple ports: */ -typedef volatile struct { - volatile unsigned short int ustcnt; - volatile unsigned short int ubaud; - union { - volatile unsigned short int w; - struct { - volatile unsigned char status; - volatile unsigned char rxdata; - } b; - } urx; - union { - volatile unsigned short int w; - struct { - volatile unsigned char status; - volatile unsigned char txdata; - } b; - } utx; - volatile unsigned short int umisc; - volatile unsigned short int pad1; - volatile unsigned short int pad2; - volatile unsigned short int pad3; -} __attribute__((packed)) m68328_uart; - - -/********** - * - * 0xFFFFFAxx -- LCD Controller - * - **********/ - -/* - * LCD Screen Starting Address Register - */ -#define LSSA_ADDR 0xfffffa00 -#define LSSA LONG_REF(LSSA_ADDR) - -#define LSSA_SSA_MASK 0xfffffffe /* Bit 0 is reserved */ - -/* - * LCD Virtual Page Width Register - */ -#define LVPW_ADDR 0xfffffa05 -#define LVPW BYTE_REF(LVPW_ADDR) - -/* - * LCD Screen Width Register (not compatible with 'EZ328 !!!) - */ -#define LXMAX_ADDR 0xfffffa08 -#define LXMAX WORD_REF(LXMAX_ADDR) - -#define LXMAX_XM_MASK 0x02ff /* Bits 0-3 are reserved */ - -/* - * LCD Screen Height Register - */ -#define LYMAX_ADDR 0xfffffa0a -#define LYMAX WORD_REF(LYMAX_ADDR) - -#define LYMAX_YM_MASK 0x02ff /* Bits 10-15 are reserved */ - -/* - * LCD Cursor X Position Register - */ -#define LCXP_ADDR 0xfffffa18 -#define LCXP WORD_REF(LCXP_ADDR) - -#define LCXP_CC_MASK 0xc000 /* Cursor Control */ -#define LCXP_CC_TRAMSPARENT 0x0000 -#define LCXP_CC_BLACK 0x4000 -#define LCXP_CC_REVERSED 0x8000 -#define LCXP_CC_WHITE 0xc000 -#define LCXP_CXP_MASK 0x02ff /* Cursor X position */ - -/* - * LCD Cursor Y Position Register - */ -#define LCYP_ADDR 0xfffffa1a -#define LCYP WORD_REF(LCYP_ADDR) - -#define LCYP_CYP_MASK 0x01ff /* Cursor Y Position */ - -/* - * LCD Cursor Width and Heigth Register - */ -#define LCWCH_ADDR 0xfffffa1c -#define LCWCH WORD_REF(LCWCH_ADDR) - -#define LCWCH_CH_MASK 0x001f /* Cursor Height */ -#define LCWCH_CH_SHIFT 0 -#define LCWCH_CW_MASK 0x1f00 /* Cursor Width */ -#define LCWCH_CW_SHIFT 8 - -/* - * LCD Blink Control Register - */ -#define LBLKC_ADDR 0xfffffa1f -#define LBLKC BYTE_REF(LBLKC_ADDR) - -#define LBLKC_BD_MASK 0x7f /* Blink Divisor */ -#define LBLKC_BD_SHIFT 0 -#define LBLKC_BKEN 0x80 /* Blink Enabled */ - -/* - * LCD Panel Interface Configuration Register - */ -#define LPICF_ADDR 0xfffffa20 -#define LPICF BYTE_REF(LPICF_ADDR) - -#define LPICF_GS_MASK 0x01 /* Gray-Scale Mode */ -#define LPICF_GS_BW 0x00 -#define LPICF_GS_GRAY_4 0x01 -#define LPICF_PBSIZ_MASK 0x06 /* Panel Bus Width */ -#define LPICF_PBSIZ_1 0x00 -#define LPICF_PBSIZ_2 0x02 -#define LPICF_PBSIZ_4 0x04 - -/* - * LCD Polarity Configuration Register - */ -#define LPOLCF_ADDR 0xfffffa21 -#define LPOLCF BYTE_REF(LPOLCF_ADDR) - -#define LPOLCF_PIXPOL 0x01 /* Pixel Polarity */ -#define LPOLCF_LPPOL 0x02 /* Line Pulse Polarity */ -#define LPOLCF_FLMPOL 0x04 /* Frame Marker Polarity */ -#define LPOLCF_LCKPOL 0x08 /* LCD Shift Lock Polarity */ - -/* - * LACD (LCD Alternate Crystal Direction) Rate Control Register - */ -#define LACDRC_ADDR 0xfffffa23 -#define LACDRC BYTE_REF(LACDRC_ADDR) - -#define LACDRC_ACD_MASK 0x0f /* Alternate Crystal Direction Control */ -#define LACDRC_ACD_SHIFT 0 - -/* - * LCD Pixel Clock Divider Register - */ -#define LPXCD_ADDR 0xfffffa25 -#define LPXCD BYTE_REF(LPXCD_ADDR) - -#define LPXCD_PCD_MASK 0x3f /* Pixel Clock Divider */ -#define LPXCD_PCD_SHIFT 0 - -/* - * LCD Clocking Control Register - */ -#define LCKCON_ADDR 0xfffffa27 -#define LCKCON BYTE_REF(LCKCON_ADDR) - -#define LCKCON_PCDS 0x01 /* Pixel Clock Divider Source Select */ -#define LCKCON_DWIDTH 0x02 /* Display Memory Width */ -#define LCKCON_DWS_MASK 0x3c /* Display Wait-State */ -#define LCKCON_DWS_SHIFT 2 -#define LCKCON_DMA16 0x40 /* DMA burst length */ -#define LCKCON_LCDON 0x80 /* Enable LCD Controller */ - -/* 'EZ328-compatible definitions */ -#define LCKCON_DW_MASK LCKCON_DWS_MASK -#define LCKCON_DW_SHIFT LCKCON_DWS_SHIFT - -/* - * LCD Last Buffer Address Register - */ -#define LLBAR_ADDR 0xfffffa29 -#define LLBAR BYTE_REF(LLBAR_ADDR) - -#define LLBAR_LBAR_MASK 0x7f /* Number of memory words to fill 1 line */ -#define LLBAR_LBAR_SHIFT 0 - -/* - * LCD Octet Terminal Count Register - */ -#define LOTCR_ADDR 0xfffffa2b -#define LOTCR BYTE_REF(LOTCR_ADDR) - -/* - * LCD Panning Offset Register - */ -#define LPOSR_ADDR 0xfffffa2d -#define LPOSR BYTE_REF(LPOSR_ADDR) - -#define LPOSR_BOS 0x08 /* Byte offset (for B/W mode only */ -#define LPOSR_POS_MASK 0x07 /* Pixel Offset Code */ -#define LPOSR_POS_SHIFT 0 - -/* - * LCD Frame Rate Control Modulation Register - */ -#define LFRCM_ADDR 0xfffffa31 -#define LFRCM BYTE_REF(LFRCM_ADDR) - -#define LFRCM_YMOD_MASK 0x0f /* Vertical Modulation */ -#define LFRCM_YMOD_SHIFT 0 -#define LFRCM_XMOD_MASK 0xf0 /* Horizontal Modulation */ -#define LFRCM_XMOD_SHIFT 4 - -/* - * LCD Gray Palette Mapping Register - */ -#define LGPMR_ADDR 0xfffffa32 -#define LGPMR WORD_REF(LGPMR_ADDR) - -#define LGPMR_GLEVEL3_MASK 0x000f -#define LGPMR_GLEVEL3_SHIFT 0 -#define LGPMR_GLEVEL2_MASK 0x00f0 -#define LGPMR_GLEVEL2_SHIFT 4 -#define LGPMR_GLEVEL0_MASK 0x0f00 -#define LGPMR_GLEVEL0_SHIFT 8 -#define LGPMR_GLEVEL1_MASK 0xf000 -#define LGPMR_GLEVEL1_SHIFT 12 - -/********** - * - * 0xFFFFFBxx -- Real-Time Clock (RTC) - * - **********/ - -/* - * RTC Hours Minutes and Seconds Register - */ -#define RTCTIME_ADDR 0xfffffb00 -#define RTCTIME LONG_REF(RTCTIME_ADDR) - -#define RTCTIME_SECONDS_MASK 0x0000003f /* Seconds */ -#define RTCTIME_SECONDS_SHIFT 0 -#define RTCTIME_MINUTES_MASK 0x003f0000 /* Minutes */ -#define RTCTIME_MINUTES_SHIFT 16 -#define RTCTIME_HOURS_MASK 0x1f000000 /* Hours */ -#define RTCTIME_HOURS_SHIFT 24 - -/* - * RTC Alarm Register - */ -#define RTCALRM_ADDR 0xfffffb04 -#define RTCALRM LONG_REF(RTCALRM_ADDR) - -#define RTCALRM_SECONDS_MASK 0x0000003f /* Seconds */ -#define RTCALRM_SECONDS_SHIFT 0 -#define RTCALRM_MINUTES_MASK 0x003f0000 /* Minutes */ -#define RTCALRM_MINUTES_SHIFT 16 -#define RTCALRM_HOURS_MASK 0x1f000000 /* Hours */ -#define RTCALRM_HOURS_SHIFT 24 - -/* - * RTC Control Register - */ -#define RTCCTL_ADDR 0xfffffb0c -#define RTCCTL WORD_REF(RTCCTL_ADDR) - -#define RTCCTL_384 0x0020 /* Crystal Selection */ -#define RTCCTL_ENABLE 0x0080 /* RTC Enable */ - -/* 'EZ328-compatible definitions */ -#define RTCCTL_XTL RTCCTL_384 -#define RTCCTL_EN RTCCTL_ENABLE - -/* - * RTC Interrupt Status Register - */ -#define RTCISR_ADDR 0xfffffb0e -#define RTCISR WORD_REF(RTCISR_ADDR) - -#define RTCISR_SW 0x0001 /* Stopwatch timed out */ -#define RTCISR_MIN 0x0002 /* 1-minute interrupt has occurred */ -#define RTCISR_ALM 0x0004 /* Alarm interrupt has occurred */ -#define RTCISR_DAY 0x0008 /* 24-hour rollover interrupt has occurred */ -#define RTCISR_1HZ 0x0010 /* 1Hz interrupt has occurred */ - -/* - * RTC Interrupt Enable Register - */ -#define RTCIENR_ADDR 0xfffffb10 -#define RTCIENR WORD_REF(RTCIENR_ADDR) - -#define RTCIENR_SW 0x0001 /* Stopwatch interrupt enable */ -#define RTCIENR_MIN 0x0002 /* 1-minute interrupt enable */ -#define RTCIENR_ALM 0x0004 /* Alarm interrupt enable */ -#define RTCIENR_DAY 0x0008 /* 24-hour rollover interrupt enable */ -#define RTCIENR_1HZ 0x0010 /* 1Hz interrupt enable */ - -/* - * Stopwatch Minutes Register - */ -#define STPWCH_ADDR 0xfffffb12 -#define STPWCH WORD_REF(STPWCH) - -#define STPWCH_CNT_MASK 0x00ff /* Stopwatch countdown value */ -#define SPTWCH_CNT_SHIFT 0 - -#endif /* _MC68328_H_ */ diff --git a/arch/m68knommu/include/asm/MC68332.h b/arch/m68knommu/include/asm/MC68332.h deleted file mode 100644 index 6bb8f02685a..00000000000 --- a/arch/m68knommu/include/asm/MC68332.h +++ /dev/null @@ -1,152 +0,0 @@ - -/* include/asm-m68knommu/MC68332.h: '332 control registers - * - * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>, - * - */ - -#ifndef _MC68332_H_ -#define _MC68332_H_ - -#define BYTE_REF(addr) (*((volatile unsigned char*)addr)) -#define WORD_REF(addr) (*((volatile unsigned short*)addr)) - -#define PORTE_ADDR 0xfffa11 -#define PORTE BYTE_REF(PORTE_ADDR) -#define DDRE_ADDR 0xfffa15 -#define DDRE BYTE_REF(DDRE_ADDR) -#define PEPAR_ADDR 0xfffa17 -#define PEPAR BYTE_REF(PEPAR_ADDR) - -#define PORTF_ADDR 0xfffa19 -#define PORTF BYTE_REF(PORTF_ADDR) -#define DDRF_ADDR 0xfffa1d -#define DDRF BYTE_REF(DDRF_ADDR) -#define PFPAR_ADDR 0xfffa1f -#define PFPAR BYTE_REF(PFPAR_ADDR) - -#define PORTQS_ADDR 0xfffc15 -#define PORTQS BYTE_REF(PORTQS_ADDR) -#define DDRQS_ADDR 0xfffc17 -#define DDRQS BYTE_REF(DDRQS_ADDR) -#define PQSPAR_ADDR 0xfffc16 -#define PQSPAR BYTE_REF(PQSPAR_ADDR) - -#define CSPAR0_ADDR 0xFFFA44 -#define CSPAR0 WORD_REF(CSPAR0_ADDR) -#define CSPAR1_ADDR 0xFFFA46 -#define CSPAR1 WORD_REF(CSPAR1_ADDR) -#define CSARBT_ADDR 0xFFFA48 -#define CSARBT WORD_REF(CSARBT_ADDR) -#define CSOPBT_ADDR 0xFFFA4A -#define CSOPBT WORD_REF(CSOPBT_ADDR) -#define CSBAR0_ADDR 0xFFFA4C -#define CSBAR0 WORD_REF(CSBAR0_ADDR) -#define CSOR0_ADDR 0xFFFA4E -#define CSOR0 WORD_REF(CSOR0_ADDR) -#define CSBAR1_ADDR 0xFFFA50 -#define CSBAR1 WORD_REF(CSBAR1_ADDR) -#define CSOR1_ADDR 0xFFFA52 -#define CSOR1 WORD_REF(CSOR1_ADDR) -#define CSBAR2_ADDR 0xFFFA54 -#define CSBAR2 WORD_REF(CSBAR2_ADDR) -#define CSOR2_ADDR 0xFFFA56 -#define CSOR2 WORD_REF(CSOR2_ADDR) -#define CSBAR3_ADDR 0xFFFA58 -#define CSBAR3 WORD_REF(CSBAR3_ADDR) -#define CSOR3_ADDR 0xFFFA5A -#define CSOR3 WORD_REF(CSOR3_ADDR) -#define CSBAR4_ADDR 0xFFFA5C -#define CSBAR4 WORD_REF(CSBAR4_ADDR) -#define CSOR4_ADDR 0xFFFA5E -#define CSOR4 WORD_REF(CSOR4_ADDR) -#define CSBAR5_ADDR 0xFFFA60 -#define CSBAR5 WORD_REF(CSBAR5_ADDR) -#define CSOR5_ADDR 0xFFFA62 -#define CSOR5 WORD_REF(CSOR5_ADDR) -#define CSBAR6_ADDR 0xFFFA64 -#define CSBAR6 WORD_REF(CSBAR6_ADDR) -#define CSOR6_ADDR 0xFFFA66 -#define CSOR6 WORD_REF(CSOR6_ADDR) -#define CSBAR7_ADDR 0xFFFA68 -#define CSBAR7 WORD_REF(CSBAR7_ADDR) -#define CSOR7_ADDR 0xFFFA6A -#define CSOR7 WORD_REF(CSOR7_ADDR) -#define CSBAR8_ADDR 0xFFFA6C -#define CSBAR8 WORD_REF(CSBAR8_ADDR) -#define CSOR8_ADDR 0xFFFA6E -#define CSOR8 WORD_REF(CSOR8_ADDR) -#define CSBAR9_ADDR 0xFFFA70 -#define CSBAR9 WORD_REF(CSBAR9_ADDR) -#define CSOR9_ADDR 0xFFFA72 -#define CSOR9 WORD_REF(CSOR9_ADDR) -#define CSBAR10_ADDR 0xFFFA74 -#define CSBAR10 WORD_REF(CSBAR10_ADDR) -#define CSOR10_ADDR 0xFFFA76 -#define CSOR10 WORD_REF(CSOR10_ADDR) - -#define CSOR_MODE_ASYNC 0x0000 -#define CSOR_MODE_SYNC 0x8000 -#define CSOR_MODE_MASK 0x8000 -#define CSOR_BYTE_DISABLE 0x0000 -#define CSOR_BYTE_UPPER 0x4000 -#define CSOR_BYTE_LOWER 0x2000 -#define CSOR_BYTE_BOTH 0x6000 -#define CSOR_BYTE_MASK 0x6000 -#define CSOR_RW_RSVD 0x0000 -#define CSOR_RW_READ 0x0800 -#define CSOR_RW_WRITE 0x1000 -#define CSOR_RW_BOTH 0x1800 -#define CSOR_RW_MASK 0x1800 -#define CSOR_STROBE_DS 0x0400 -#define CSOR_STROBE_AS 0x0000 -#define CSOR_STROBE_MASK 0x0400 -#define CSOR_DSACK_WAIT(x) (wait << 6) -#define CSOR_DSACK_FTERM (14 << 6) -#define CSOR_DSACK_EXTERNAL (15 << 6) -#define CSOR_DSACK_MASK 0x03c0 -#define CSOR_SPACE_CPU 0x0000 -#define CSOR_SPACE_USER 0x0010 -#define CSOR_SPACE_SU 0x0020 -#define CSOR_SPACE_BOTH 0x0030 -#define CSOR_SPACE_MASK 0x0030 -#define CSOR_IPL_ALL 0x0000 -#define CSOR_IPL_PRIORITY(x) (x << 1) -#define CSOR_IPL_MASK 0x000e -#define CSOR_AVEC_ON 0x0001 -#define CSOR_AVEC_OFF 0x0000 -#define CSOR_AVEC_MASK 0x0001 - -#define CSBAR_ADDR(x) ((addr >> 11) << 3) -#define CSBAR_ADDR_MASK 0xfff8 -#define CSBAR_BLKSIZE_2K 0x0000 -#define CSBAR_BLKSIZE_8K 0x0001 -#define CSBAR_BLKSIZE_16K 0x0002 -#define CSBAR_BLKSIZE_64K 0x0003 -#define CSBAR_BLKSIZE_128K 0x0004 -#define CSBAR_BLKSIZE_256K 0x0005 -#define CSBAR_BLKSIZE_512K 0x0006 -#define CSBAR_BLKSIZE_1M 0x0007 -#define CSBAR_BLKSIZE_MASK 0x0007 - -#define CSPAR_DISC 0 -#define CSPAR_ALT 1 -#define CSPAR_CS8 2 -#define CSPAR_CS16 3 -#define CSPAR_MASK 3 - -#define CSPAR0_CSBOOT(x) (x << 0) -#define CSPAR0_CS0(x) (x << 2) -#define CSPAR0_CS1(x) (x << 4) -#define CSPAR0_CS2(x) (x << 6) -#define CSPAR0_CS3(x) (x << 8) -#define CSPAR0_CS4(x) (x << 10) -#define CSPAR0_CS5(x) (x << 12) - -#define CSPAR1_CS6(x) (x << 0) -#define CSPAR1_CS7(x) (x << 2) -#define CSPAR1_CS8(x) (x << 4) -#define CSPAR1_CS9(x) (x << 6) -#define CSPAR1_CS10(x) (x << 8) - -#endif diff --git a/arch/m68knommu/include/asm/MC68EZ328.h b/arch/m68knommu/include/asm/MC68EZ328.h deleted file mode 100644 index 69b7f9139e5..00000000000 --- a/arch/m68knommu/include/asm/MC68EZ328.h +++ /dev/null @@ -1,1253 +0,0 @@ - -/* include/asm-m68knommu/MC68EZ328.h: 'EZ328 control registers - * - * Copyright (C) 1999 Vladimir Gurevich <vgurevic@cisco.com> - * Bear & Hare Software, Inc. - * - * Based on include/asm-m68knommu/MC68332.h - * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>, - * The Silver Hammer Group, Ltd. - * - */ - -#ifndef _MC68EZ328_H_ -#define _MC68EZ328_H_ - -#define BYTE_REF(addr) (*((volatile unsigned char*)addr)) -#define WORD_REF(addr) (*((volatile unsigned short*)addr)) -#define LONG_REF(addr) (*((volatile unsigned long*)addr)) - -#define PUT_FIELD(field, val) (((val) << field##_SHIFT) & field##_MASK) -#define GET_FIELD(reg, field) (((reg) & field##_MASK) >> field##_SHIFT) - -/********** - * - * 0xFFFFF0xx -- System Control - * - **********/ - -/* - * System Control Register (SCR) - */ -#define SCR_ADDR 0xfffff000 -#define SCR BYTE_REF(SCR_ADDR) - -#define SCR_WDTH8 0x01 /* 8-Bit Width Select */ -#define SCR_DMAP 0x04 /* Double Map */ -#define SCR_SO 0x08 /* Supervisor Only */ -#define SCR_BETEN 0x10 /* Bus-Error Time-Out Enable */ -#define SCR_PRV 0x20 /* Privilege Violation */ -#define SCR_WPV 0x40 /* Write Protect Violation */ -#define SCR_BETO 0x80 /* Bus-Error TimeOut */ - -/* - * Silicon ID Register (Mask Revision Register (MRR) for '328 Compatibility) - */ -#define MRR_ADDR 0xfffff004 -#define MRR LONG_REF(MRR_ADDR) - -/********** - * - * 0xFFFFF1xx -- Chip-Select logic - * - **********/ - -/* - * Chip Select Group Base Registers - */ -#define CSGBA_ADDR 0xfffff100 -#define CSGBB_ADDR 0xfffff102 - -#define CSGBC_ADDR 0xfffff104 -#define CSGBD_ADDR 0xfffff106 - -#define CSGBA WORD_REF(CSGBA_ADDR) -#define CSGBB WORD_REF(CSGBB_ADDR) -#define CSGBC WORD_REF(CSGBC_ADDR) -#define CSGBD WORD_REF(CSGBD_ADDR) - -/* - * Chip Select Registers - */ -#define CSA_ADDR 0xfffff110 -#define CSB_ADDR 0xfffff112 -#define CSC_ADDR 0xfffff114 -#define CSD_ADDR 0xfffff116 - -#define CSA WORD_REF(CSA_ADDR) -#define CSB WORD_REF(CSB_ADDR) -#define CSC WORD_REF(CSC_ADDR) -#define CSD WORD_REF(CSD_ADDR) - -#define CSA_EN 0x0001 /* Chip-Select Enable */ -#define CSA_SIZ_MASK 0x000e /* Chip-Select Size */ -#define CSA_SIZ_SHIFT 1 -#define CSA_WS_MASK 0x0070 /* Wait State */ -#define CSA_WS_SHIFT 4 -#define CSA_BSW 0x0080 /* Data Bus Width */ -#define CSA_FLASH 0x0100 /* FLASH Memory Support */ -#define CSA_RO 0x8000 /* Read-Only */ - -#define CSB_EN 0x0001 /* Chip-Select Enable */ -#define CSB_SIZ_MASK 0x000e /* Chip-Select Size */ -#define CSB_SIZ_SHIFT 1 -#define CSB_WS_MASK 0x0070 /* Wait State */ -#define CSB_WS_SHIFT 4 -#define CSB_BSW 0x0080 /* Data Bus Width */ -#define CSB_FLASH 0x0100 /* FLASH Memory Support */ -#define CSB_UPSIZ_MASK 0x1800 /* Unprotected memory block size */ -#define CSB_UPSIZ_SHIFT 11 -#define CSB_ROP 0x2000 /* Readonly if protected */ -#define CSB_SOP 0x4000 /* Supervisor only if protected */ -#define CSB_RO 0x8000 /* Read-Only */ - -#define CSC_EN 0x0001 /* Chip-Select Enable */ -#define CSC_SIZ_MASK 0x000e /* Chip-Select Size */ -#define CSC_SIZ_SHIFT 1 -#define CSC_WS_MASK 0x0070 /* Wait State */ -#define CSC_WS_SHIFT 4 -#define CSC_BSW 0x0080 /* Data Bus Width */ -#define CSC_FLASH 0x0100 /* FLASH Memory Support */ -#define CSC_UPSIZ_MASK 0x1800 /* Unprotected memory block size */ -#define CSC_UPSIZ_SHIFT 11 -#define CSC_ROP 0x2000 /* Readonly if protected */ -#define CSC_SOP 0x4000 /* Supervisor only if protected */ -#define CSC_RO 0x8000 /* Read-Only */ - -#define CSD_EN 0x0001 /* Chip-Select Enable */ -#define CSD_SIZ_MASK 0x000e /* Chip-Select Size */ -#define CSD_SIZ_SHIFT 1 -#define CSD_WS_MASK 0x0070 /* Wait State */ -#define CSD_WS_SHIFT 4 -#define CSD_BSW 0x0080 /* Data Bus Width */ -#define CSD_FLASH 0x0100 /* FLASH Memory Support */ -#define CSD_DRAM 0x0200 /* Dram Selection */ -#define CSD_COMB 0x0400 /* Combining */ -#define CSD_UPSIZ_MASK 0x1800 /* Unprotected memory block size */ -#define CSD_UPSIZ_SHIFT 11 -#define CSD_ROP 0x2000 /* Readonly if protected */ -#define CSD_SOP 0x4000 /* Supervisor only if protected */ -#define CSD_RO 0x8000 /* Read-Only */ - -/* - * Emulation Chip-Select Register - */ -#define EMUCS_ADDR 0xfffff118 -#define EMUCS WORD_REF(EMUCS_ADDR) - -#define EMUCS_WS_MASK 0x0070 -#define EMUCS_WS_SHIFT 4 - -/********** - * - * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control - * - **********/ - -/* - * PLL Control Register - */ -#define PLLCR_ADDR 0xfffff200 -#define PLLCR WORD_REF(PLLCR_ADDR) - -#define PLLCR_DISPLL 0x0008 /* Disable PLL */ -#define PLLCR_CLKEN 0x0010 /* Clock (CLKO pin) enable */ -#define PLLCR_PRESC 0x0020 /* VCO prescaler */ -#define PLLCR_SYSCLK_SEL_MASK 0x0700 /* System Clock Selection */ -#define PLLCR_SYSCLK_SEL_SHIFT 8 -#define PLLCR_LCDCLK_SEL_MASK 0x3800 /* LCD Clock Selection */ -#define PLLCR_LCDCLK_SEL_SHIFT 11 - -/* '328-compatible definitions */ -#define PLLCR_PIXCLK_SEL_MASK PLLCR_LCDCLK_SEL_MASK -#define PLLCR_PIXCLK_SEL_SHIFT PLLCR_LCDCLK_SEL_SHIFT - -/* - * PLL Frequency Select Register - */ -#define PLLFSR_ADDR 0xfffff202 -#define PLLFSR WORD_REF(PLLFSR_ADDR) - -#define PLLFSR_PC_MASK 0x00ff /* P Count */ -#define PLLFSR_PC_SHIFT 0 -#define PLLFSR_QC_MASK 0x0f00 /* Q Count */ -#define PLLFSR_QC_SHIFT 8 -#define PLLFSR_PROT 0x4000 /* Protect P & Q */ -#define PLLFSR_CLK32 0x8000 /* Clock 32 (kHz) */ - -/* - * Power Control Register - */ -#define PCTRL_ADDR 0xfffff207 -#define PCTRL BYTE_REF(PCTRL_ADDR) - -#define PCTRL_WIDTH_MASK 0x1f /* CPU Clock bursts width */ -#define PCTRL_WIDTH_SHIFT 0 -#define PCTRL_PCEN 0x80 /* Power Control Enable */ - -/********** - * - * 0xFFFFF3xx -- Interrupt Controller - * - **********/ - -/* - * Interrupt Vector Register - */ -#define IVR_ADDR 0xfffff300 -#define IVR BYTE_REF(IVR_ADDR) - -#define IVR_VECTOR_MASK 0xF8 - -/* - * Interrupt control Register - */ -#define ICR_ADDR 0xfffff302 -#define ICR WORD_REF(ICR_ADDR) - -#define ICR_POL5 0x0080 /* Polarity Control for IRQ5 */ -#define ICR_ET6 0x0100 /* Edge Trigger Select for IRQ6 */ -#define ICR_ET3 0x0200 /* Edge Trigger Select for IRQ3 */ -#define ICR_ET2 0x0400 /* Edge Trigger Select for IRQ2 */ -#define ICR_ET1 0x0800 /* Edge Trigger Select for IRQ1 */ -#define ICR_POL6 0x1000 /* Polarity Control for IRQ6 */ -#define ICR_POL3 0x2000 /* Polarity Control for IRQ3 */ -#define ICR_POL2 0x4000 /* Polarity Control for IRQ2 */ -#define ICR_POL1 0x8000 /* Polarity Control for IRQ1 */ - -/* - * Interrupt Mask Register - */ -#define IMR_ADDR 0xfffff304 -#define IMR LONG_REF(IMR_ADDR) - -/* - * Define the names for bit positions first. This is useful for - * request_irq - */ -#define SPI_IRQ_NUM 0 /* SPI interrupt */ -#define TMR_IRQ_NUM 1 /* Timer interrupt */ -#define UART_IRQ_NUM 2 /* UART interrupt */ -#define WDT_IRQ_NUM 3 /* Watchdog Timer interrupt */ -#define RTC_IRQ_NUM 4 /* RTC interrupt */ -#define KB_IRQ_NUM 6 /* Keyboard Interrupt */ -#define PWM_IRQ_NUM 7 /* Pulse-Width Modulator int. */ -#define INT0_IRQ_NUM 8 /* External INT0 */ -#define INT1_IRQ_NUM 9 /* External INT1 */ -#define INT2_IRQ_NUM 10 /* External INT2 */ -#define INT3_IRQ_NUM 11 /* External INT3 */ -#define IRQ1_IRQ_NUM 16 /* IRQ1 */ -#define IRQ2_IRQ_NUM 17 /* IRQ2 */ -#define IRQ3_IRQ_NUM 18 /* IRQ3 */ -#define IRQ6_IRQ_NUM 19 /* IRQ6 */ -#define IRQ5_IRQ_NUM 20 /* IRQ5 */ -#define SAM_IRQ_NUM 22 /* Sampling Timer for RTC */ -#define EMIQ_IRQ_NUM 23 /* Emulator Interrupt */ - -/* '328-compatible definitions */ -#define SPIM_IRQ_NUM SPI_IRQ_NUM -#define TMR1_IRQ_NUM TMR_IRQ_NUM - -/* - * Here go the bitmasks themselves - */ -#define IMR_MSPI (1 << SPI_IRQ_NUM) /* Mask SPI interrupt */ -#define IMR_MTMR (1 << TMR_IRQ_NUM) /* Mask Timer interrupt */ -#define IMR_MUART (1 << UART_IRQ_NUM) /* Mask UART interrupt */ -#define IMR_MWDT (1 << WDT_IRQ_NUM) /* Mask Watchdog Timer interrupt */ -#define IMR_MRTC (1 << RTC_IRQ_NUM) /* Mask RTC interrupt */ -#define IMR_MKB (1 << KB_IRQ_NUM) /* Mask Keyboard Interrupt */ -#define IMR_MPWM (1 << PWM_IRQ_NUM) /* Mask Pulse-Width Modulator int. */ -#define IMR_MINT0 (1 << INT0_IRQ_NUM) /* Mask External INT0 */ -#define IMR_MINT1 (1 << INT1_IRQ_NUM) /* Mask External INT1 */ -#define IMR_MINT2 (1 << INT2_IRQ_NUM) /* Mask External INT2 */ -#define IMR_MINT3 (1 << INT3_IRQ_NUM) /* Mask External INT3 */ -#define IMR_MIRQ1 (1 << IRQ1_IRQ_NUM) /* Mask IRQ1 */ -#define IMR_MIRQ2 (1 << IRQ2_IRQ_NUM) /* Mask IRQ2 */ -#define IMR_MIRQ3 (1 << IRQ3_IRQ_NUM) /* Mask IRQ3 */ -#define IMR_MIRQ6 (1 << IRQ6_IRQ_NUM) /* Mask IRQ6 */ -#define IMR_MIRQ5 (1 << IRQ5_IRQ_NUM) /* Mask IRQ5 */ -#define IMR_MSAM (1 << SAM_IRQ_NUM) /* Mask Sampling Timer for RTC */ -#define IMR_MEMIQ (1 << EMIQ_IRQ_NUM) /* Mask Emulator Interrupt */ - -/* '328-compatible definitions */ -#define IMR_MSPIM IMR_MSPI -#define IMR_MTMR1 IMR_MTMR - -/* - * Interrupt Status Register - */ -#define ISR_ADDR 0xfffff30c -#define ISR LONG_REF(ISR_ADDR) - -#define ISR_SPI (1 << SPI_IRQ_NUM) /* SPI interrupt */ -#define ISR_TMR (1 << TMR_IRQ_NUM) /* Timer interrupt */ -#define ISR_UART (1 << UART_IRQ_NUM) /* UART interrupt */ -#define ISR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */ -#define ISR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */ -#define ISR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */ -#define ISR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator interrupt */ -#define ISR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */ -#define ISR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */ -#define ISR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */ -#define ISR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */ -#define ISR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */ -#define ISR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */ -#define ISR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */ -#define ISR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */ -#define ISR_IRQ5 (1 << IRQ5_IRQ_NUM) /* IRQ5 */ -#define ISR_SAM (1 << SAM_IRQ_NUM) /* Sampling Timer for RTC */ -#define ISR_EMIQ (1 << EMIQ_IRQ_NUM) /* Emulator Interrupt */ - -/* '328-compatible definitions */ -#define ISR_SPIM ISR_SPI -#define ISR_TMR1 ISR_TMR - -/* - * Interrupt Pending Register - */ -#define IPR_ADDR 0xfffff30c -#define IPR LONG_REF(IPR_ADDR) - -#define IPR_SPI (1 << SPI_IRQ_NUM) /* SPI interrupt */ -#define IPR_TMR (1 << TMR_IRQ_NUM) /* Timer interrupt */ -#define IPR_UART (1 << UART_IRQ_NUM) /* UART interrupt */ -#define IPR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */ -#define IPR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */ -#define IPR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */ -#define IPR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator interrupt */ -#define IPR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */ -#define IPR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */ -#define IPR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */ -#define IPR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */ -#define IPR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */ -#define IPR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */ -#define IPR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */ -#define IPR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */ -#define IPR_IRQ5 (1 << IRQ5_IRQ_NUM) /* IRQ5 */ -#define IPR_SAM (1 << SAM_IRQ_NUM) /* Sampling Timer for RTC */ -#define IPR_EMIQ (1 << EMIQ_IRQ_NUM) /* Emulator Interrupt */ - -/* '328-compatible definitions */ -#define IPR_SPIM IPR_SPI -#define IPR_TMR1 IPR_TMR - -/********** - * - * 0xFFFFF4xx -- Parallel Ports - * - **********/ - -/* - * Port A - */ -#define PADIR_ADDR 0xfffff400 /* Port A direction reg */ -#define PADATA_ADDR 0xfffff401 /* Port A data register */ -#define PAPUEN_ADDR 0xfffff402 /* Port A Pull-Up enable reg */ - -#define PADIR BYTE_REF(PADIR_ADDR) -#define PADATA BYTE_REF(PADATA_ADDR) -#define PAPUEN BYTE_REF(PAPUEN_ADDR) - -#define PA(x) (1 << (x)) - -/* - * Port B - */ -#define PBDIR_ADDR 0xfffff408 /* Port B direction reg */ -#define PBDATA_ADDR 0xfffff409 /* Port B data register */ -#define PBPUEN_ADDR 0xfffff40a /* Port B Pull-Up enable reg */ -#define PBSEL_ADDR 0xfffff40b /* Port B Select Register */ - -#define PBDIR BYTE_REF(PBDIR_ADDR) -#define PBDATA BYTE_REF(PBDATA_ADDR) -#define PBPUEN BYTE_REF(PBPUEN_ADDR) -#define PBSEL BYTE_REF(PBSEL_ADDR) - -#define PB(x) (1 << (x)) - -#define PB_CSB0 0x01 /* Use CSB0 as PB[0] */ -#define PB_CSB1 0x02 /* Use CSB1 as PB[1] */ -#define PB_CSC0_RAS0 0x04 /* Use CSC0/RAS0 as PB[2] */ -#define PB_CSC1_RAS1 0x08 /* Use CSC1/RAS1 as PB[3] */ -#define PB_CSD0_CAS0 0x10 /* Use CSD0/CAS0 as PB[4] */ -#define PB_CSD1_CAS1 0x20 /* Use CSD1/CAS1 as PB[5] */ -#define PB_TIN_TOUT 0x40 /* Use TIN/TOUT as PB[6] */ -#define PB_PWMO 0x80 /* Use PWMO as PB[7] */ - -/* - * Port C - */ -#define PCDIR_ADDR 0xfffff410 /* Port C direction reg */ -#define PCDATA_ADDR 0xfffff411 /* Port C data register */ -#define PCPDEN_ADDR 0xfffff412 /* Port C Pull-Down enb. reg */ -#define PCSEL_ADDR 0xfffff413 /* Port C Select Register */ - -#define PCDIR BYTE_REF(PCDIR_ADDR) -#define PCDATA BYTE_REF(PCDATA_ADDR) -#define PCPDEN BYTE_REF(PCPDEN_ADDR) -#define PCSEL BYTE_REF(PCSEL_ADDR) - -#define PC(x) (1 << (x)) - -#define PC_LD0 0x01 /* Use LD0 as PC[0] */ -#define PC_LD1 0x02 /* Use LD1 as PC[1] */ -#define PC_LD2 0x04 /* Use LD2 as PC[2] */ -#define PC_LD3 0x08 /* Use LD3 as PC[3] */ -#define PC_LFLM 0x10 /* Use LFLM as PC[4] */ -#define PC_LLP 0x20 /* Use LLP as PC[5] */ -#define PC_LCLK 0x40 /* Use LCLK as PC[6] */ -#define PC_LACD 0x80 /* Use LACD as PC[7] */ - -/* - * Port D - */ -#define PDDIR_ADDR 0xfffff418 /* Port D direction reg */ -#define PDDATA_ADDR 0xfffff419 /* Port D data register */ -#define PDPUEN_ADDR 0xfffff41a /* Port D Pull-Up enable reg */ -#define PDSEL_ADDR 0xfffff41b /* Port D Select Register */ -#define PDPOL_ADDR 0xfffff41c /* Port D Polarity Register */ -#define PDIRQEN_ADDR 0xfffff41d /* Port D IRQ enable register */ -#define PDKBEN_ADDR 0xfffff41e /* Port D Keyboard Enable reg */ -#define PDIQEG_ADDR 0xfffff41f /* Port D IRQ Edge Register */ - -#define PDDIR BYTE_REF(PDDIR_ADDR) -#define PDDATA BYTE_REF(PDDATA_ADDR) -#define PDPUEN BYTE_REF(PDPUEN_ADDR) -#define PDSEL BYTE_REF(PDSEL_ADDR) -#define PDPOL BYTE_REF(PDPOL_ADDR) -#define PDIRQEN BYTE_REF(PDIRQEN_ADDR) -#define PDKBEN BYTE_REF(PDKBEN_ADDR) -#define PDIQEG BYTE_REF(PDIQEG_ADDR) - -#define PD(x) (1 << (x)) - -#define PD_INT0 0x01 /* Use INT0 as PD[0] */ -#define PD_INT1 0x02 /* Use INT1 as PD[1] */ -#define PD_INT2 0x04 /* Use INT2 as PD[2] */ -#define PD_INT3 0x08 /* Use INT3 as PD[3] */ -#define PD_IRQ1 0x10 /* Use IRQ1 as PD[4] */ -#define PD_IRQ2 0x20 /* Use IRQ2 as PD[5] */ -#define PD_IRQ3 0x40 /* Use IRQ3 as PD[6] */ -#define PD_IRQ6 0x80 /* Use IRQ6 as PD[7] */ - -/* - * Port E - */ -#define PEDIR_ADDR 0xfffff420 /* Port E direction reg */ -#define PEDATA_ADDR 0xfffff421 /* Port E data register */ -#define PEPUEN_ADDR 0xfffff422 /* Port E Pull-Up enable reg */ -#define PESEL_ADDR 0xfffff423 /* Port E Select Register */ - -#define PEDIR BYTE_REF(PEDIR_ADDR) -#define PEDATA BYTE_REF(PEDATA_ADDR) -#define PEPUEN BYTE_REF(PEPUEN_ADDR) -#define PESEL BYTE_REF(PESEL_ADDR) - -#define PE(x) (1 << (x)) - -#define PE_SPMTXD 0x01 /* Use SPMTXD as PE[0] */ -#define PE_SPMRXD 0x02 /* Use SPMRXD as PE[1] */ -#define PE_SPMCLK 0x04 /* Use SPMCLK as PE[2] */ -#define PE_DWE 0x08 /* Use DWE as PE[3] */ -#define PE_RXD 0x10 /* Use RXD as PE[4] */ -#define PE_TXD 0x20 /* Use TXD as PE[5] */ -#define PE_RTS 0x40 /* Use RTS as PE[6] */ -#define PE_CTS 0x80 /* Use CTS as PE[7] */ - -/* - * Port F - */ -#define PFDIR_ADDR 0xfffff428 /* Port F direction reg */ -#define PFDATA_ADDR 0xfffff429 /* Port F data register */ -#define PFPUEN_ADDR 0xfffff42a /* Port F Pull-Up enable reg */ -#define PFSEL_ADDR 0xfffff42b /* Port F Select Register */ - -#define PFDIR BYTE_REF(PFDIR_ADDR) -#define PFDATA BYTE_REF(PFDATA_ADDR) -#define PFPUEN BYTE_REF(PFPUEN_ADDR) -#define PFSEL BYTE_REF(PFSEL_ADDR) - -#define PF(x) (1 << (x)) - -#define PF_LCONTRAST 0x01 /* Use LCONTRAST as PF[0] */ -#define PF_IRQ5 0x02 /* Use IRQ5 as PF[1] */ -#define PF_CLKO 0x04 /* Use CLKO as PF[2] */ -#define PF_A20 0x08 /* Use A20 as PF[3] */ -#define PF_A21 0x10 /* Use A21 as PF[4] */ -#define PF_A22 0x20 /* Use A22 as PF[5] */ -#define PF_A23 0x40 /* Use A23 as PF[6] */ -#define PF_CSA1 0x80 /* Use CSA1 as PF[7] */ - -/* - * Port G - */ -#define PGDIR_ADDR 0xfffff430 /* Port G direction reg */ -#define PGDATA_ADDR 0xfffff431 /* Port G data register */ -#define PGPUEN_ADDR 0xfffff432 /* Port G Pull-Up enable reg */ -#define PGSEL_ADDR 0xfffff433 /* Port G Select Register */ - -#define PGDIR BYTE_REF(PGDIR_ADDR) -#define PGDATA BYTE_REF(PGDATA_ADDR) -#define PGPUEN BYTE_REF(PGPUEN_ADDR) -#define PGSEL BYTE_REF(PGSEL_ADDR) - -#define PG(x) (1 << (x)) - -#define PG_BUSW_DTACK 0x01 /* Use BUSW/DTACK as PG[0] */ -#define PG_A0 0x02 /* Use A0 as PG[1] */ -#define PG_EMUIRQ 0x04 /* Use EMUIRQ as PG[2] */ -#define PG_HIZ_P_D 0x08 /* Use HIZ/P/D as PG[3] */ -#define PG_EMUCS 0x10 /* Use EMUCS as PG[4] */ -#define PG_EMUBRK 0x20 /* Use EMUBRK as PG[5] */ - -/********** - * - * 0xFFFFF5xx -- Pulse-Width Modulator (PWM) - * - **********/ - -/* - * PWM Control Register - */ -#define PWMC_ADDR 0xfffff500 -#define PWMC WORD_REF(PWMC_ADDR) - -#define PWMC_CLKSEL_MASK 0x0003 /* Clock Selection */ -#define PWMC_CLKSEL_SHIFT 0 -#define PWMC_REPEAT_MASK 0x000c /* Sample Repeats */ -#define PWMC_REPEAT_SHIFT 2 -#define PWMC_EN 0x0010 /* Enable PWM */ -#define PMNC_FIFOAV 0x0020 /* FIFO Available */ -#define PWMC_IRQEN 0x0040 /* Interrupt Request Enable */ -#define PWMC_IRQ 0x0080 /* Interrupt Request (FIFO empty) */ -#define PWMC_PRESCALER_MASK 0x7f00 /* Incoming Clock prescaler */ -#define PWMC_PRESCALER_SHIFT 8 -#define PWMC_CLKSRC 0x8000 /* Clock Source Select */ - -/* '328-compatible definitions */ -#define PWMC_PWMEN PWMC_EN - -/* - * PWM Sample Register - */ -#define PWMS_ADDR 0xfffff502 -#define PWMS WORD_REF(PWMS_ADDR) - -/* - * PWM Period Register - */ -#define PWMP_ADDR 0xfffff504 -#define PWMP BYTE_REF(PWMP_ADDR) - -/* - * PWM Counter Register - */ -#define PWMCNT_ADDR 0xfffff505 -#define PWMCNT BYTE_REF(PWMCNT_ADDR) - -/********** - * - * 0xFFFFF6xx -- General-Purpose Timer - * - **********/ - -/* - * Timer Control register - */ -#define TCTL_ADDR 0xfffff600 -#define TCTL WORD_REF(TCTL_ADDR) - -#define TCTL_TEN 0x0001 /* Timer Enable */ -#define TCTL_CLKSOURCE_MASK 0x000e /* Clock Source: */ -#define TCTL_CLKSOURCE_STOP 0x0000 /* Stop count (disabled) */ -#define TCTL_CLKSOURCE_SYSCLK 0x0002 /* SYSCLK to prescaler */ -#define TCTL_CLKSOURCE_SYSCLK_16 0x0004 /* SYSCLK/16 to prescaler */ -#define TCTL_CLKSOURCE_TIN 0x0006 /* TIN to prescaler */ -#define TCTL_CLKSOURCE_32KHZ 0x0008 /* 32kHz clock to prescaler */ -#define TCTL_IRQEN 0x0010 /* IRQ Enable */ -#define TCTL_OM 0x0020 /* Output Mode */ -#define TCTL_CAP_MASK 0x00c0 /* Capture Edge: */ -#define TCTL_CAP_RE 0x0040 /* Capture on rizing edge */ -#define TCTL_CAP_FE 0x0080 /* Capture on falling edge */ -#define TCTL_FRR 0x0010 /* Free-Run Mode */ - -/* '328-compatible definitions */ -#define TCTL1_ADDR TCTL_ADDR -#define TCTL1 TCTL - -/* - * Timer Prescaler Register - */ -#define TPRER_ADDR 0xfffff602 -#define TPRER WORD_REF(TPRER_ADDR) - -/* '328-compatible definitions */ -#define TPRER1_ADDR TPRER_ADDR -#define TPRER1 TPRER - -/* - * Timer Compare Register - */ -#define TCMP_ADDR 0xfffff604 -#define TCMP WORD_REF(TCMP_ADDR) - -/* '328-compatible definitions */ -#define TCMP1_ADDR TCMP_ADDR -#define TCMP1 TCMP - -/* - * Timer Capture register - */ -#define TCR_ADDR 0xfffff606 -#define TCR WORD_REF(TCR_ADDR) - -/* '328-compatible definitions */ -#define TCR1_ADDR TCR_ADDR -#define TCR1 TCR - -/* - * Timer Counter Register - */ -#define TCN_ADDR 0xfffff608 -#define TCN WORD_REF(TCN_ADDR) - -/* '328-compatible definitions */ -#define TCN1_ADDR TCN_ADDR -#define TCN1 TCN - -/* - * Timer Status Register - */ -#define TSTAT_ADDR 0xfffff60a -#define TSTAT WORD_REF(TSTAT_ADDR) - -#define TSTAT_COMP 0x0001 /* Compare Event occurred */ -#define TSTAT_CAPT 0x0001 /* Capture Event occurred */ - -/* '328-compatible definitions */ -#define TSTAT1_ADDR TSTAT_ADDR -#define TSTAT1 TSTAT - -/********** - * - * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM) - * - **********/ - -/* - * SPIM Data Register - */ -#define SPIMDATA_ADDR 0xfffff800 -#define SPIMDATA WORD_REF(SPIMDATA_ADDR) - -/* - * SPIM Control/Status Register - */ -#define SPIMCONT_ADDR 0xfffff802 -#define SPIMCONT WORD_REF(SPIMCONT_ADDR) - -#define SPIMCONT_BIT_COUNT_MASK 0x000f /* Transfer Length in Bytes */ -#define SPIMCONT_BIT_COUNT_SHIFT 0 -#define SPIMCONT_POL 0x0010 /* SPMCLK Signel Polarity */ -#define SPIMCONT_PHA 0x0020 /* Clock/Data phase relationship */ -#define SPIMCONT_IRQEN 0x0040 /* IRQ Enable */ -#define SPIMCONT_IRQ 0x0080 /* Interrupt Request */ -#define SPIMCONT_XCH 0x0100 /* Exchange */ -#define SPIMCONT_ENABLE 0x0200 /* Enable SPIM */ -#define SPIMCONT_DATA_RATE_MASK 0xe000 /* SPIM Data Rate */ -#define SPIMCONT_DATA_RATE_SHIFT 13 - -/* '328-compatible definitions */ -#define SPIMCONT_SPIMIRQ SPIMCONT_IRQ -#define SPIMCONT_SPIMEN SPIMCONT_ENABLE - -/********** - * - * 0xFFFFF9xx -- UART - * - **********/ - -/* - * UART Status/Control Register - */ -#define USTCNT_ADDR 0xfffff900 -#define USTCNT WORD_REF(USTCNT_ADDR) - -#define USTCNT_TXAE 0x0001 /* Transmitter Available Interrupt Enable */ -#define USTCNT_TXHE 0x0002 /* Transmitter Half Empty Enable */ -#define USTCNT_TXEE 0x0004 /* Transmitter Empty Interrupt Enable */ -#define USTCNT_RXRE 0x0008 /* Receiver Ready Interrupt Enable */ -#define USTCNT_RXHE 0x0010 /* Receiver Half-Full Interrupt Enable */ -#define USTCNT_RXFE 0x0020 /* Receiver Full Interrupt Enable */ -#define USTCNT_CTSD 0x0040 /* CTS Delta Interrupt Enable */ -#define USTCNT_ODEN 0x0080 /* Old Data Interrupt Enable */ -#define USTCNT_8_7 0x0100 /* Eight or seven-bit transmission */ -#define USTCNT_STOP 0x0200 /* Stop bit transmission */ -#define USTCNT_ODD 0x0400 /* Odd Parity */ -#define USTCNT_PEN 0x0800 /* Parity Enable */ -#define USTCNT_CLKM 0x1000 /* Clock Mode Select */ -#define USTCNT_TXEN 0x2000 /* Transmitter Enable */ -#define USTCNT_RXEN 0x4000 /* Receiver Enable */ -#define USTCNT_UEN 0x8000 /* UART Enable */ - -/* '328-compatible definitions */ -#define USTCNT_TXAVAILEN USTCNT_TXAE -#define USTCNT_TXHALFEN USTCNT_TXHE -#define USTCNT_TXEMPTYEN USTCNT_TXEE -#define USTCNT_RXREADYEN USTCNT_RXRE -#define USTCNT_RXHALFEN USTCNT_RXHE -#define USTCNT_RXFULLEN USTCNT_RXFE -#define USTCNT_CTSDELTAEN USTCNT_CTSD -#define USTCNT_ODD_EVEN USTCNT_ODD -#define USTCNT_PARITYEN USTCNT_PEN -#define USTCNT_CLKMODE USTCNT_CLKM -#define USTCNT_UARTEN USTCNT_UEN - -/* - * UART Baud Control Register - */ -#define UBAUD_ADDR 0xfffff902 -#define UBAUD WORD_REF(UBAUD_ADDR) - -#define UBAUD_PRESCALER_MASK 0x003f /* Actual divisor is 65 - PRESCALER */ -#define UBAUD_PRESCALER_SHIFT 0 -#define UBAUD_DIVIDE_MASK 0x0700 /* Baud Rate freq. divizor */ -#define UBAUD_DIVIDE_SHIFT 8 -#define UBAUD_BAUD_SRC 0x0800 /* Baud Rate Source */ -#define UBAUD_UCLKDIR 0x2000 /* UCLK Direction */ - -/* - * UART Receiver Register - */ -#define URX_ADDR 0xfffff904 -#define URX WORD_REF(URX_ADDR) - -#define URX_RXDATA_ADDR 0xfffff905 -#define URX_RXDATA BYTE_REF(URX_RXDATA_ADDR) - -#define URX_RXDATA_MASK 0x00ff /* Received data */ -#define URX_RXDATA_SHIFT 0 -#define URX_PARITY_ERROR 0x0100 /* Parity Error */ -#define URX_BREAK 0x0200 /* Break Detected */ -#define URX_FRAME_ERROR 0x0400 /* Framing Error */ -#define URX_OVRUN 0x0800 /* Serial Overrun */ -#define URX_OLD_DATA 0x1000 /* Old data in FIFO */ -#define URX_DATA_READY 0x2000 /* Data Ready (FIFO not empty) */ -#define URX_FIFO_HALF 0x4000 /* FIFO is Half-Full */ -#define URX_FIFO_FULL 0x8000 /* FIFO is Full */ - -/* - * UART Transmitter Register - */ -#define UTX_ADDR 0xfffff906 -#define UTX WORD_REF(UTX_ADDR) - -#define UTX_TXDATA_ADDR 0xfffff907 -#define UTX_TXDATA BYTE_REF(UTX_TXDATA_ADDR) - -#define UTX_TXDATA_MASK 0x00ff /* Data to be transmitted */ -#define UTX_TXDATA_SHIFT 0 -#define UTX_CTS_DELTA 0x0100 /* CTS changed */ -#define UTX_CTS_STAT 0x0200 /* CTS State */ -#define UTX_BUSY 0x0400 /* FIFO is busy, sending a character */ -#define UTX_NOCTS 0x0800 /* Ignore CTS */ -#define UTX_SEND_BREAK 0x1000 /* Send a BREAK */ -#define UTX_TX_AVAIL 0x2000 /* Transmit FIFO has a slot available */ -#define UTX_FIFO_HALF 0x4000 /* Transmit FIFO is half empty */ -#define UTX_FIFO_EMPTY 0x8000 /* Transmit FIFO is empty */ - -/* '328-compatible definitions */ -#define UTX_CTS_STATUS UTX_CTS_STAT -#define UTX_IGNORE_CTS UTX_NOCTS - -/* - * UART Miscellaneous Register - */ -#define UMISC_ADDR 0xfffff908 -#define UMISC WORD_REF(UMISC_ADDR) - -#define UMISC_TX_POL 0x0004 /* Transmit Polarity */ -#define UMISC_RX_POL 0x0008 /* Receive Polarity */ -#define UMISC_IRDA_LOOP 0x0010 /* IrDA Loopback Enable */ -#define UMISC_IRDA_EN 0x0020 /* Infra-Red Enable */ -#define UMISC_RTS 0x0040 /* Set RTS status */ -#define UMISC_RTSCONT 0x0080 /* Choose RTS control */ -#define UMISC_IR_TEST 0x0400 /* IRDA Test Enable */ -#define UMISC_BAUD_RESET 0x0800 /* Reset Baud Rate Generation Counters */ -#define UMISC_LOOP 0x1000 /* Serial Loopback Enable */ -#define UMISC_FORCE_PERR 0x2000 /* Force Parity Error */ -#define UMISC_CLKSRC 0x4000 /* Clock Source */ -#define UMISC_BAUD_TEST 0x8000 /* Enable Baud Test Mode */ - -/* - * UART Non-integer Prescaler Register - */ -#define NIPR_ADDR 0xfffff90a -#define NIPR WORD_REF(NIPR_ADDR) - -#define NIPR_STEP_VALUE_MASK 0x00ff /* NI prescaler step value */ -#define NIPR_STEP_VALUE_SHIFT 0 -#define NIPR_SELECT_MASK 0x0700 /* Tap Selection */ -#define NIPR_SELECT_SHIFT 8 -#define NIPR_PRE_SEL 0x8000 /* Non-integer prescaler select */ - - -/* generalization of uart control registers to support multiple ports: */ -typedef volatile struct { - volatile unsigned short int ustcnt; - volatile unsigned short int ubaud; - union { - volatile unsigned short int w; - struct { - volatile unsigned char status; - volatile unsigned char rxdata; - } b; - } urx; - union { - volatile unsigned short int w; - struct { - volatile unsigned char status; - volatile unsigned char txdata; - } b; - } utx; - volatile unsigned short int umisc; - volatile unsigned short int nipr; - volatile unsigned short int pad1; - volatile unsigned short int pad2; -} __attribute__((packed)) m68328_uart; - - -/********** - * - * 0xFFFFFAxx -- LCD Controller - * - **********/ - -/* - * LCD Screen Starting Address Register - */ -#define LSSA_ADDR 0xfffffa00 -#define LSSA LONG_REF(LSSA_ADDR) - -#define LSSA_SSA_MASK 0x1ffffffe /* Bits 0 and 29-31 are reserved */ - -/* - * LCD Virtual Page Width Register - */ -#define LVPW_ADDR 0xfffffa05 -#define LVPW BYTE_REF(LVPW_ADDR) - -/* - * LCD Screen Width Register (not compatible with '328 !!!) - */ -#define LXMAX_ADDR 0xfffffa08 -#define LXMAX WORD_REF(LXMAX_ADDR) - -#define LXMAX_XM_MASK 0x02f0 /* Bits 0-3 and 10-15 are reserved */ - -/* - * LCD Screen Height Register - */ -#define LYMAX_ADDR 0xfffffa0a -#define LYMAX WORD_REF(LYMAX_ADDR) - -#define LYMAX_YM_MASK 0x01ff /* Bits 9-15 are reserved */ - -/* - * LCD Cursor X Position Register - */ -#define LCXP_ADDR 0xfffffa18 -#define LCXP WORD_REF(LCXP_ADDR) - -#define LCXP_CC_MASK 0xc000 /* Cursor Control */ -#define LCXP_CC_TRAMSPARENT 0x0000 -#define LCXP_CC_BLACK 0x4000 -#define LCXP_CC_REVERSED 0x8000 -#define LCXP_CC_WHITE 0xc000 -#define LCXP_CXP_MASK 0x02ff /* Cursor X position */ - -/* - * LCD Cursor Y Position Register - */ -#define LCYP_ADDR 0xfffffa1a -#define LCYP WORD_REF(LCYP_ADDR) - -#define LCYP_CYP_MASK 0x01ff /* Cursor Y Position */ - -/* - * LCD Cursor Width and Heigth Register - */ -#define LCWCH_ADDR 0xfffffa1c -#define LCWCH WORD_REF(LCWCH_ADDR) - -#define LCWCH_CH_MASK 0x001f /* Cursor Height */ -#define LCWCH_CH_SHIFT 0 -#define LCWCH_CW_MASK 0x1f00 /* Cursor Width */ -#define LCWCH_CW_SHIFT 8 - -/* - * LCD Blink Control Register - */ -#define LBLKC_ADDR 0xfffffa1f -#define LBLKC BYTE_REF(LBLKC_ADDR) - -#define LBLKC_BD_MASK 0x7f /* Blink Divisor */ -#define LBLKC_BD_SHIFT 0 -#define LBLKC_BKEN 0x80 /* Blink Enabled */ - -/* - * LCD Panel Interface Configuration Register - */ -#define LPICF_ADDR 0xfffffa20 -#define LPICF BYTE_REF(LPICF_ADDR) - -#define LPICF_GS_MASK 0x03 /* Gray-Scale Mode */ -#define LPICF_GS_BW 0x00 -#define LPICF_GS_GRAY_4 0x01 -#define LPICF_GS_GRAY_16 0x02 -#define LPICF_PBSIZ_MASK 0x0c /* Panel Bus Width */ -#define LPICF_PBSIZ_1 0x00 -#define LPICF_PBSIZ_2 0x04 -#define LPICF_PBSIZ_4 0x08 - -/* - * LCD Polarity Configuration Register - */ -#define LPOLCF_ADDR 0xfffffa21 -#define LPOLCF BYTE_REF(LPOLCF_ADDR) - -#define LPOLCF_PIXPOL 0x01 /* Pixel Polarity */ -#define LPOLCF_LPPOL 0x02 /* Line Pulse Polarity */ -#define LPOLCF_FLMPOL 0x04 /* Frame Marker Polarity */ -#define LPOLCF_LCKPOL 0x08 /* LCD Shift Lock Polarity */ - -/* - * LACD (LCD Alternate Crystal Direction) Rate Control Register - */ -#define LACDRC_ADDR 0xfffffa23 -#define LACDRC BYTE_REF(LACDRC_ADDR) - -#define LACDRC_ACDSLT 0x80 /* Signal Source Select */ -#define LACDRC_ACD_MASK 0x0f /* Alternate Crystal Direction Control */ -#define LACDRC_ACD_SHIFT 0 - -/* - * LCD Pixel Clock Divider Register - */ -#define LPXCD_ADDR 0xfffffa25 -#define LPXCD BYTE_REF(LPXCD_ADDR) - -#define LPXCD_PCD_MASK 0x3f /* Pixel Clock Divider */ -#define LPXCD_PCD_SHIFT 0 - -/* - * LCD Clocking Control Register - */ -#define LCKCON_ADDR 0xfffffa27 -#define LCKCON BYTE_REF(LCKCON_ADDR) - -#define LCKCON_DWS_MASK 0x0f /* Display Wait-State */ -#define LCKCON_DWS_SHIFT 0 -#define LCKCON_DWIDTH 0x40 /* Display Memory Width */ -#define LCKCON_LCDON 0x80 /* Enable LCD Controller */ - -/* '328-compatible definitions */ -#define LCKCON_DW_MASK LCKCON_DWS_MASK -#define LCKCON_DW_SHIFT LCKCON_DWS_SHIFT - -/* - * LCD Refresh Rate Adjustment Register - */ -#define LRRA_ADDR 0xfffffa29 -#define LRRA BYTE_REF(LRRA_ADDR) - -/* - * LCD Panning Offset Register - */ -#define LPOSR_ADDR 0xfffffa2d -#define LPOSR BYTE_REF(LPOSR_ADDR) - -#define LPOSR_POS_MASK 0x0f /* Pixel Offset Code */ -#define LPOSR_POS_SHIFT 0 - -/* - * LCD Frame Rate Control Modulation Register - */ -#define LFRCM_ADDR 0xfffffa31 -#define LFRCM BYTE_REF(LFRCM_ADDR) - -#define LFRCM_YMOD_MASK 0x0f /* Vertical Modulation */ -#define LFRCM_YMOD_SHIFT 0 -#define LFRCM_XMOD_MASK 0xf0 /* Horizontal Modulation */ -#define LFRCM_XMOD_SHIFT 4 - -/* - * LCD Gray Palette Mapping Register - */ -#define LGPMR_ADDR 0xfffffa33 -#define LGPMR BYTE_REF(LGPMR_ADDR) - -#define LGPMR_G1_MASK 0x0f -#define LGPMR_G1_SHIFT 0 -#define LGPMR_G2_MASK 0xf0 -#define LGPMR_G2_SHIFT 4 - -/* - * PWM Contrast Control Register - */ -#define PWMR_ADDR 0xfffffa36 -#define PWMR WORD_REF(PWMR_ADDR) - -#define PWMR_PW_MASK 0x00ff /* Pulse Width */ -#define PWMR_PW_SHIFT 0 -#define PWMR_CCPEN 0x0100 /* Contrast Control Enable */ -#define PWMR_SRC_MASK 0x0600 /* Input Clock Source */ -#define PWMR_SRC_LINE 0x0000 /* Line Pulse */ -#define PWMR_SRC_PIXEL 0x0200 /* Pixel Clock */ -#define PWMR_SRC_LCD 0x4000 /* LCD clock */ - -/********** - * - * 0xFFFFFBxx -- Real-Time Clock (RTC) - * - **********/ - -/* - * RTC Hours Minutes and Seconds Register - */ -#define RTCTIME_ADDR 0xfffffb00 -#define RTCTIME LONG_REF(RTCTIME_ADDR) - -#define RTCTIME_SECONDS_MASK 0x0000003f /* Seconds */ -#define RTCTIME_SECONDS_SHIFT 0 -#define RTCTIME_MINUTES_MASK 0x003f0000 /* Minutes */ -#define RTCTIME_MINUTES_SHIFT 16 -#define RTCTIME_HOURS_MASK 0x1f000000 /* Hours */ -#define RTCTIME_HOURS_SHIFT 24 - -/* - * RTC Alarm Register - */ -#define RTCALRM_ADDR 0xfffffb04 -#define RTCALRM LONG_REF(RTCALRM_ADDR) - -#define RTCALRM_SECONDS_MASK 0x0000003f /* Seconds */ -#define RTCALRM_SECONDS_SHIFT 0 -#define RTCALRM_MINUTES_MASK 0x003f0000 /* Minutes */ -#define RTCALRM_MINUTES_SHIFT 16 -#define RTCALRM_HOURS_MASK 0x1f000000 /* Hours */ -#define RTCALRM_HOURS_SHIFT 24 - -/* - * Watchdog Timer Register - */ -#define WATCHDOG_ADDR 0xfffffb0a -#define WATCHDOG WORD_REF(WATCHDOG_ADDR) - -#define WATCHDOG_EN 0x0001 /* Watchdog Enabled */ -#define WATCHDOG_ISEL 0x0002 /* Select the watchdog interrupt */ -#define WATCHDOG_INTF 0x0080 /* Watchdog interrupt occcured */ -#define WATCHDOG_CNT_MASK 0x0300 /* Watchdog Counter */ -#define WATCHDOG_CNT_SHIFT 8 - -/* - * RTC Control Register - */ -#define RTCCTL_ADDR 0xfffffb0c -#define RTCCTL WORD_REF(RTCCTL_ADDR) - -#define RTCCTL_XTL 0x0020 /* Crystal Selection */ -#define RTCCTL_EN 0x0080 /* RTC Enable */ - -/* '328-compatible definitions */ -#define RTCCTL_384 RTCCTL_XTL -#define RTCCTL_ENABLE RTCCTL_EN - -/* - * RTC Interrupt Status Register - */ -#define RTCISR_ADDR 0xfffffb0e -#define RTCISR WORD_REF(RTCISR_ADDR) - -#define RTCISR_SW 0x0001 /* Stopwatch timed out */ -#define RTCISR_MIN 0x0002 /* 1-minute interrupt has occurred */ -#define RTCISR_ALM 0x0004 /* Alarm interrupt has occurred */ -#define RTCISR_DAY 0x0008 /* 24-hour rollover interrupt has occurred */ -#define RTCISR_1HZ 0x0010 /* 1Hz interrupt has occurred */ -#define RTCISR_HR 0x0020 /* 1-hour interrupt has occurred */ -#define RTCISR_SAM0 0x0100 /* 4Hz / 4.6875Hz interrupt has occurred */ -#define RTCISR_SAM1 0x0200 /* 8Hz / 9.3750Hz interrupt has occurred */ -#define RTCISR_SAM2 0x0400 /* 16Hz / 18.7500Hz interrupt has occurred */ -#define RTCISR_SAM3 0x0800 /* 32Hz / 37.5000Hz interrupt has occurred */ -#define RTCISR_SAM4 0x1000 /* 64Hz / 75.0000Hz interrupt has occurred */ -#define RTCISR_SAM5 0x2000 /* 128Hz / 150.0000Hz interrupt has occurred */ -#define RTCISR_SAM6 0x4000 /* 256Hz / 300.0000Hz interrupt has occurred */ -#define RTCISR_SAM7 0x8000 /* 512Hz / 600.0000Hz interrupt has occurred */ - -/* - * RTC Interrupt Enable Register - */ -#define RTCIENR_ADDR 0xfffffb10 -#define RTCIENR WORD_REF(RTCIENR_ADDR) - -#define RTCIENR_SW 0x0001 /* Stopwatch interrupt enable */ -#define RTCIENR_MIN 0x0002 /* 1-minute interrupt enable */ -#define RTCIENR_ALM 0x0004 /* Alarm interrupt enable */ -#define RTCIENR_DAY 0x0008 /* 24-hour rollover interrupt enable */ -#define RTCIENR_1HZ 0x0010 /* 1Hz interrupt enable */ -#define RTCIENR_HR 0x0020 /* 1-hour interrupt enable */ -#define RTCIENR_SAM0 0x0100 /* 4Hz / 4.6875Hz interrupt enable */ -#define RTCIENR_SAM1 0x0200 /* 8Hz / 9.3750Hz interrupt enable */ -#define RTCIENR_SAM2 0x0400 /* 16Hz / 18.7500Hz interrupt enable */ -#define RTCIENR_SAM3 0x0800 /* 32Hz / 37.5000Hz interrupt enable */ -#define RTCIENR_SAM4 0x1000 /* 64Hz / 75.0000Hz interrupt enable */ -#define RTCIENR_SAM5 0x2000 /* 128Hz / 150.0000Hz interrupt enable */ -#define RTCIENR_SAM6 0x4000 /* 256Hz / 300.0000Hz interrupt enable */ -#define RTCIENR_SAM7 0x8000 /* 512Hz / 600.0000Hz interrupt enable */ - -/* - * Stopwatch Minutes Register - */ -#define STPWCH_ADDR 0xfffffb12 -#define STPWCH WORD_REF(STPWCH) - -#define STPWCH_CNT_MASK 0x003f /* Stopwatch countdown value */ -#define SPTWCH_CNT_SHIFT 0 - -/* - * RTC Day Count Register - */ -#define DAYR_ADDR 0xfffffb1a -#define DAYR WORD_REF(DAYR_ADDR) - -#define DAYR_DAYS_MASK 0x1ff /* Day Setting */ -#define DAYR_DAYS_SHIFT 0 - -/* - * RTC Day Alarm Register - */ -#define DAYALARM_ADDR 0xfffffb1c -#define DAYALARM WORD_REF(DAYALARM_ADDR) - -#define DAYALARM_DAYSAL_MASK 0x01ff /* Day Setting of the Alarm */ -#define DAYALARM_DAYSAL_SHIFT 0 - -/********** - * - * 0xFFFFFCxx -- DRAM Controller - * - **********/ - -/* - * DRAM Memory Configuration Register - */ -#define DRAMMC_ADDR 0xfffffc00 -#define DRAMMC WORD_REF(DRAMMC_ADDR) - -#define DRAMMC_ROW12_MASK 0xc000 /* Row address bit for MD12 */ -#define DRAMMC_ROW12_PA10 0x0000 -#define DRAMMC_ROW12_PA21 0x4000 -#define DRAMMC_ROW12_PA23 0x8000 -#define DRAMMC_ROW0_MASK 0x3000 /* Row address bit for MD0 */ -#define DRAMMC_ROW0_PA11 0x0000 -#define DRAMMC_ROW0_PA22 0x1000 -#define DRAMMC_ROW0_PA23 0x2000 -#define DRAMMC_ROW11 0x0800 /* Row address bit for MD11 PA20/PA22 */ -#define DRAMMC_ROW10 0x0400 /* Row address bit for MD10 PA19/PA21 */ -#define DRAMMC_ROW9 0x0200 /* Row address bit for MD9 PA9/PA19 */ -#define DRAMMC_ROW8 0x0100 /* Row address bit for MD8 PA10/PA20 */ -#define DRAMMC_COL10 0x0080 /* Col address bit for MD10 PA11/PA0 */ -#define DRAMMC_COL9 0x0040 /* Col address bit for MD9 PA10/PA0 */ -#define DRAMMC_COL8 0x0020 /* Col address bit for MD8 PA9/PA0 */ -#define DRAMMC_REF_MASK 0x001f /* Reresh Cycle */ -#define DRAMMC_REF_SHIFT 0 - -/* - * DRAM Control Register - */ -#define DRAMC_ADDR 0xfffffc02 -#define DRAMC WORD_REF(DRAMC_ADDR) - -#define DRAMC_DWE 0x0001 /* DRAM Write Enable */ -#define DRAMC_RST 0x0002 /* Reset Burst Refresh Enable */ -#define DRAMC_LPR 0x0004 /* Low-Power Refresh Enable */ -#define DRAMC_SLW 0x0008 /* Slow RAM */ -#define DRAMC_LSP 0x0010 /* Light Sleep */ -#define DRAMC_MSW 0x0020 /* Slow Multiplexing */ -#define DRAMC_WS_MASK 0x00c0 /* Wait-states */ -#define DRAMC_WS_SHIFT 6 -#define DRAMC_PGSZ_MASK 0x0300 /* Page Size for fast page mode */ -#define DRAMC_PGSZ_SHIFT 8 -#define DRAMC_PGSZ_256K 0x0000 -#define DRAMC_PGSZ_512K 0x0100 -#define DRAMC_PGSZ_1024K 0x0200 -#define DRAMC_PGSZ_2048K 0x0300 -#define DRAMC_EDO 0x0400 /* EDO DRAM */ -#define DRAMC_CLK 0x0800 /* Refresh Timer Clock source select */ -#define DRAMC_BC_MASK 0x3000 /* Page Access Clock Cycle (FP mode) */ -#define DRAMC_BC_SHIFT 12 -#define DRAMC_RM 0x4000 /* Refresh Mode */ -#define DRAMC_EN 0x8000 /* DRAM Controller enable */ - - -/********** - * - * 0xFFFFFDxx -- In-Circuit Emulation (ICE) - * - **********/ - -/* - * ICE Module Address Compare Register - */ -#define ICEMACR_ADDR 0xfffffd00 -#define ICEMACR LONG_REF(ICEMACR_ADDR) - -/* - * ICE Module Address Mask Register - */ -#define ICEMAMR_ADDR 0xfffffd04 -#define ICEMAMR LONG_REF(ICEMAMR_ADDR) - -/* - * ICE Module Control Compare Register - */ -#define ICEMCCR_ADDR 0xfffffd08 -#define ICEMCCR WORD_REF(ICEMCCR_ADDR) - -#define ICEMCCR_PD 0x0001 /* Program/Data Cycle Selection */ -#define ICEMCCR_RW 0x0002 /* Read/Write Cycle Selection */ - -/* - * ICE Module Control Mask Register - */ -#define ICEMCMR_ADDR 0xfffffd0a -#define ICEMCMR WORD_REF(ICEMCMR_ADDR) - -#define ICEMCMR_PDM 0x0001 /* Program/Data Cycle Mask */ -#define ICEMCMR_RWM 0x0002 /* Read/Write Cycle Mask */ - -/* - * ICE Module Control Register - */ -#define ICEMCR_ADDR 0xfffffd0c -#define ICEMCR WORD_REF(ICEMCR_ADDR) - -#define ICEMCR_CEN 0x0001 /* Compare Enable */ -#define ICEMCR_PBEN 0x0002 /* Program Break Enable */ -#define ICEMCR_SB 0x0004 /* Single Breakpoint */ -#define ICEMCR_HMDIS 0x0008 /* HardMap disable */ -#define ICEMCR_BBIEN 0x0010 /* Bus Break Interrupt Enable */ - -/* - * ICE Module Status Register - */ -#define ICEMSR_ADDR 0xfffffd0e -#define ICEMSR WORD_REF(ICEMSR_ADDR) - -#define ICEMSR_EMUEN 0x0001 /* Emulation Enable */ -#define ICEMSR_BRKIRQ 0x0002 /* A-Line Vector Fetch Detected */ -#define ICEMSR_BBIRQ 0x0004 /* Bus Break Interrupt Detected */ -#define ICEMSR_EMIRQ 0x0008 /* EMUIRQ Falling Edge Detected */ - -#endif /* _MC68EZ328_H_ */ diff --git a/arch/m68knommu/include/asm/MC68VZ328.h b/arch/m68knommu/include/asm/MC68VZ328.h deleted file mode 100644 index 2b9bf626a0a..00000000000 --- a/arch/m68knommu/include/asm/MC68VZ328.h +++ /dev/null @@ -1,1349 +0,0 @@ - -/* include/asm-m68knommu/MC68VZ328.h: 'VZ328 control registers - * - * Copyright (c) 2000-2001 Lineo Inc. <www.lineo.com> - * Copyright (c) 2000-2001 Lineo Canada Corp. <www.lineo.ca> - * Copyright (C) 1999 Vladimir Gurevich <vgurevic@cisco.com> - * Bare & Hare Software, Inc. - * Based on include/asm-m68knommu/MC68332.h - * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>, - * The Silver Hammer Group, Ltd. - * - * M68VZ328 fixes by Evan Stawnyczy <evan@lineo.com> - * vz multiport fixes by Michael Leslie <mleslie@lineo.com> - */ - -#ifndef _MC68VZ328_H_ -#define _MC68VZ328_H_ - -#define BYTE_REF(addr) (*((volatile unsigned char*)addr)) -#define WORD_REF(addr) (*((volatile unsigned short*)addr)) -#define LONG_REF(addr) (*((volatile unsigned long*)addr)) - -#define PUT_FIELD(field, val) (((val) << field##_SHIFT) & field##_MASK) -#define GET_FIELD(reg, field) (((reg) & field##_MASK) >> field##_SHIFT) - -/********** - * - * 0xFFFFF0xx -- System Control - * - **********/ - -/* - * System Control Register (SCR) - */ -#define SCR_ADDR 0xfffff000 -#define SCR BYTE_REF(SCR_ADDR) - -#define SCR_WDTH8 0x01 /* 8-Bit Width Select */ -#define SCR_DMAP 0x04 /* Double Map */ -#define SCR_SO 0x08 /* Supervisor Only */ -#define SCR_BETEN 0x10 /* Bus-Error Time-Out Enable */ -#define SCR_PRV 0x20 /* Privilege Violation */ -#define SCR_WPV 0x40 /* Write Protect Violation */ -#define SCR_BETO 0x80 /* Bus-Error TimeOut */ - -/* - * Silicon ID Register (Mask Revision Register (MRR) for '328 Compatibility) - */ -#define MRR_ADDR 0xfffff004 -#define MRR LONG_REF(MRR_ADDR) - -/********** - * - * 0xFFFFF1xx -- Chip-Select logic - * - **********/ - -/* - * Chip Select Group Base Registers - */ -#define CSGBA_ADDR 0xfffff100 -#define CSGBB_ADDR 0xfffff102 - -#define CSGBC_ADDR 0xfffff104 -#define CSGBD_ADDR 0xfffff106 - -#define CSGBA WORD_REF(CSGBA_ADDR) -#define CSGBB WORD_REF(CSGBB_ADDR) -#define CSGBC WORD_REF(CSGBC_ADDR) -#define CSGBD WORD_REF(CSGBD_ADDR) - -/* - * Chip Select Registers - */ -#define CSA_ADDR 0xfffff110 -#define CSB_ADDR 0xfffff112 -#define CSC_ADDR 0xfffff114 -#define CSD_ADDR 0xfffff116 - -#define CSA WORD_REF(CSA_ADDR) -#define CSB WORD_REF(CSB_ADDR) -#define CSC WORD_REF(CSC_ADDR) -#define CSD WORD_REF(CSD_ADDR) - -#define CSA_EN 0x0001 /* Chip-Select Enable */ -#define CSA_SIZ_MASK 0x000e /* Chip-Select Size */ -#define CSA_SIZ_SHIFT 1 -#define CSA_WS_MASK 0x0070 /* Wait State */ -#define CSA_WS_SHIFT 4 -#define CSA_BSW 0x0080 /* Data Bus Width */ -#define CSA_FLASH 0x0100 /* FLASH Memory Support */ -#define CSA_RO 0x8000 /* Read-Only */ - -#define CSB_EN 0x0001 /* Chip-Select Enable */ -#define CSB_SIZ_MASK 0x000e /* Chip-Select Size */ -#define CSB_SIZ_SHIFT 1 -#define CSB_WS_MASK 0x0070 /* Wait State */ -#define CSB_WS_SHIFT 4 -#define CSB_BSW 0x0080 /* Data Bus Width */ -#define CSB_FLASH 0x0100 /* FLASH Memory Support */ -#define CSB_UPSIZ_MASK 0x1800 /* Unprotected memory block size */ -#define CSB_UPSIZ_SHIFT 11 -#define CSB_ROP 0x2000 /* Readonly if protected */ -#define CSB_SOP 0x4000 /* Supervisor only if protected */ -#define CSB_RO 0x8000 /* Read-Only */ - -#define CSC_EN 0x0001 /* Chip-Select Enable */ -#define CSC_SIZ_MASK 0x000e /* Chip-Select Size */ -#define CSC_SIZ_SHIFT 1 -#define CSC_WS_MASK 0x0070 /* Wait State */ -#define CSC_WS_SHIFT 4 -#define CSC_BSW 0x0080 /* Data Bus Width */ -#define CSC_FLASH 0x0100 /* FLASH Memory Support */ -#define CSC_UPSIZ_MASK 0x1800 /* Unprotected memory block size */ -#define CSC_UPSIZ_SHIFT 11 -#define CSC_ROP 0x2000 /* Readonly if protected */ -#define CSC_SOP 0x4000 /* Supervisor only if protected */ -#define CSC_RO 0x8000 /* Read-Only */ - -#define CSD_EN 0x0001 /* Chip-Select Enable */ -#define CSD_SIZ_MASK 0x000e /* Chip-Select Size */ -#define CSD_SIZ_SHIFT 1 -#define CSD_WS_MASK 0x0070 /* Wait State */ -#define CSD_WS_SHIFT 4 -#define CSD_BSW 0x0080 /* Data Bus Width */ -#define CSD_FLASH 0x0100 /* FLASH Memory Support */ -#define CSD_DRAM 0x0200 /* Dram Selection */ -#define CSD_COMB 0x0400 /* Combining */ -#define CSD_UPSIZ_MASK 0x1800 /* Unprotected memory block size */ -#define CSD_UPSIZ_SHIFT 11 -#define CSD_ROP 0x2000 /* Readonly if protected */ -#define CSD_SOP 0x4000 /* Supervisor only if protected */ -#define CSD_RO 0x8000 /* Read-Only */ - -/* - * Emulation Chip-Select Register - */ -#define EMUCS_ADDR 0xfffff118 -#define EMUCS WORD_REF(EMUCS_ADDR) - -#define EMUCS_WS_MASK 0x0070 -#define EMUCS_WS_SHIFT 4 - -/********** - * - * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control - * - **********/ - -/* - * PLL Control Register - */ -#define PLLCR_ADDR 0xfffff200 -#define PLLCR WORD_REF(PLLCR_ADDR) - -#define PLLCR_DISPLL 0x0008 /* Disable PLL */ -#define PLLCR_CLKEN 0x0010 /* Clock (CLKO pin) enable */ -#define PLLCR_PRESC 0x0020 /* VCO prescaler */ -#define PLLCR_SYSCLK_SEL_MASK 0x0700 /* System Clock Selection */ -#define PLLCR_SYSCLK_SEL_SHIFT 8 -#define PLLCR_LCDCLK_SEL_MASK 0x3800 /* LCD Clock Selection */ -#define PLLCR_LCDCLK_SEL_SHIFT 11 - -/* '328-compatible definitions */ -#define PLLCR_PIXCLK_SEL_MASK PLLCR_LCDCLK_SEL_MASK -#define PLLCR_PIXCLK_SEL_SHIFT PLLCR_LCDCLK_SEL_SHIFT - -/* - * PLL Frequency Select Register - */ -#define PLLFSR_ADDR 0xfffff202 -#define PLLFSR WORD_REF(PLLFSR_ADDR) - -#define PLLFSR_PC_MASK 0x00ff /* P Count */ -#define PLLFSR_PC_SHIFT 0 -#define PLLFSR_QC_MASK 0x0f00 /* Q Count */ -#define PLLFSR_QC_SHIFT 8 -#define PLLFSR_PROT 0x4000 /* Protect P & Q */ -#define PLLFSR_CLK32 0x8000 /* Clock 32 (kHz) */ - -/* - * Power Control Register - */ -#define PCTRL_ADDR 0xfffff207 -#define PCTRL BYTE_REF(PCTRL_ADDR) - -#define PCTRL_WIDTH_MASK 0x1f /* CPU Clock bursts width */ -#define PCTRL_WIDTH_SHIFT 0 -#define PCTRL_PCEN 0x80 /* Power Control Enable */ - -/********** - * - * 0xFFFFF3xx -- Interrupt Controller - * - **********/ - -/* - * Interrupt Vector Register - */ -#define IVR_ADDR 0xfffff300 -#define IVR BYTE_REF(IVR_ADDR) - -#define IVR_VECTOR_MASK 0xF8 - -/* - * Interrupt control Register - */ -#define ICR_ADDR 0xfffff302 -#define ICR WORD_REF(ICR_ADDR) - -#define ICR_POL5 0x0080 /* Polarity Control for IRQ5 */ -#define ICR_ET6 0x0100 /* Edge Trigger Select for IRQ6 */ -#define ICR_ET3 0x0200 /* Edge Trigger Select for IRQ3 */ -#define ICR_ET2 0x0400 /* Edge Trigger Select for IRQ2 */ -#define ICR_ET1 0x0800 /* Edge Trigger Select for IRQ1 */ -#define ICR_POL6 0x1000 /* Polarity Control for IRQ6 */ -#define ICR_POL3 0x2000 /* Polarity Control for IRQ3 */ -#define ICR_POL2 0x4000 /* Polarity Control for IRQ2 */ -#define ICR_POL1 0x8000 /* Polarity Control for IRQ1 */ - -/* - * Interrupt Mask Register - */ -#define IMR_ADDR 0xfffff304 -#define IMR LONG_REF(IMR_ADDR) - -/* - * Define the names for bit positions first. This is useful for - * request_irq - */ -#define SPI2_IRQ_NUM 0 /* SPI 2 interrupt */ -#define TMR_IRQ_NUM 1 /* Timer 1 interrupt */ -#define UART1_IRQ_NUM 2 /* UART 1 interrupt */ -#define WDT_IRQ_NUM 3 /* Watchdog Timer interrupt */ -#define RTC_IRQ_NUM 4 /* RTC interrupt */ -#define TMR2_IRQ_NUM 5 /* Timer 2 interrupt */ -#define KB_IRQ_NUM 6 /* Keyboard Interrupt */ -#define PWM1_IRQ_NUM 7 /* Pulse-Width Modulator 1 int. */ -#define INT0_IRQ_NUM 8 /* External INT0 */ -#define INT1_IRQ_NUM 9 /* External INT1 */ -#define INT2_IRQ_NUM 10 /* External INT2 */ -#define INT3_IRQ_NUM 11 /* External INT3 */ -#define UART2_IRQ_NUM 12 /* UART 2 interrupt */ -#define PWM2_IRQ_NUM 13 /* Pulse-Width Modulator 1 int. */ -#define IRQ1_IRQ_NUM 16 /* IRQ1 */ -#define IRQ2_IRQ_NUM 17 /* IRQ2 */ -#define IRQ3_IRQ_NUM 18 /* IRQ3 */ -#define IRQ6_IRQ_NUM 19 /* IRQ6 */ -#define IRQ5_IRQ_NUM 20 /* IRQ5 */ -#define SPI1_IRQ_NUM 21 /* SPI 1 interrupt */ -#define SAM_IRQ_NUM 22 /* Sampling Timer for RTC */ -#define EMIQ_IRQ_NUM 23 /* Emulator Interrupt */ - -#define SPI_IRQ_NUM SPI2_IRQ_NUM - -/* '328-compatible definitions */ -#define SPIM_IRQ_NUM SPI_IRQ_NUM -#define TMR1_IRQ_NUM TMR_IRQ_NUM -#define UART_IRQ_NUM UART1_IRQ_NUM - -/* - * Here go the bitmasks themselves - */ -#define IMR_MSPI (1 << SPI_IRQ_NUM) /* Mask SPI interrupt */ -#define IMR_MTMR (1 << TMR_IRQ_NUM) /* Mask Timer interrupt */ -#define IMR_MUART (1 << UART_IRQ_NUM) /* Mask UART interrupt */ -#define IMR_MWDT (1 << WDT_IRQ_NUM) /* Mask Watchdog Timer interrupt */ -#define IMR_MRTC (1 << RTC_IRQ_NUM) /* Mask RTC interrupt */ -#define IMR_MKB (1 << KB_IRQ_NUM) /* Mask Keyboard Interrupt */ -#define IMR_MPWM (1 << PWM_IRQ_NUM) /* Mask Pulse-Width Modulator int. */ -#define IMR_MINT0 (1 << INT0_IRQ_NUM) /* Mask External INT0 */ -#define IMR_MINT1 (1 << INT1_IRQ_NUM) /* Mask External INT1 */ -#define IMR_MINT2 (1 << INT2_IRQ_NUM) /* Mask External INT2 */ -#define IMR_MINT3 (1 << INT3_IRQ_NUM) /* Mask External INT3 */ -#define IMR_MIRQ1 (1 << IRQ1_IRQ_NUM) /* Mask IRQ1 */ -#define IMR_MIRQ2 (1 << IRQ2_IRQ_NUM) /* Mask IRQ2 */ -#define IMR_MIRQ3 (1 << IRQ3_IRQ_NUM) /* Mask IRQ3 */ -#define IMR_MIRQ6 (1 << IRQ6_IRQ_NUM) /* Mask IRQ6 */ -#define IMR_MIRQ5 (1 << IRQ5_IRQ_NUM) /* Mask IRQ5 */ -#define IMR_MSAM (1 << SAM_IRQ_NUM) /* Mask Sampling Timer for RTC */ -#define IMR_MEMIQ (1 << EMIQ_IRQ_NUM) /* Mask Emulator Interrupt */ - -/* '328-compatible definitions */ -#define IMR_MSPIM IMR_MSPI -#define IMR_MTMR1 IMR_MTMR - -/* - * Interrupt Status Register - */ -#define ISR_ADDR 0xfffff30c -#define ISR LONG_REF(ISR_ADDR) - -#define ISR_SPI (1 << SPI_IRQ_NUM) /* SPI interrupt */ -#define ISR_TMR (1 << TMR_IRQ_NUM) /* Timer interrupt */ -#define ISR_UART (1 << UART_IRQ_NUM) /* UART interrupt */ -#define ISR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */ -#define ISR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */ -#define ISR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */ -#define ISR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator interrupt */ -#define ISR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */ -#define ISR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */ -#define ISR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */ -#define ISR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */ -#define ISR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */ -#define ISR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */ -#define ISR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */ -#define ISR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */ -#define ISR_IRQ5 (1 << IRQ5_IRQ_NUM) /* IRQ5 */ -#define ISR_SAM (1 << SAM_IRQ_NUM) /* Sampling Timer for RTC */ -#define ISR_EMIQ (1 << EMIQ_IRQ_NUM) /* Emulator Interrupt */ - -/* '328-compatible definitions */ -#define ISR_SPIM ISR_SPI -#define ISR_TMR1 ISR_TMR - -/* - * Interrupt Pending Register - */ -#define IPR_ADDR 0xfffff30c -#define IPR LONG_REF(IPR_ADDR) - -#define IPR_SPI (1 << SPI_IRQ_NUM) /* SPI interrupt */ -#define IPR_TMR (1 << TMR_IRQ_NUM) /* Timer interrupt */ -#define IPR_UART (1 << UART_IRQ_NUM) /* UART interrupt */ -#define IPR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */ -#define IPR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */ -#define IPR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */ -#define IPR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator interrupt */ -#define IPR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */ -#define IPR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */ -#define IPR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */ -#define IPR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */ -#define IPR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */ -#define IPR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */ -#define IPR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */ -#define IPR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */ -#define IPR_IRQ5 (1 << IRQ5_IRQ_NUM) /* IRQ5 */ -#define IPR_SAM (1 << SAM_IRQ_NUM) /* Sampling Timer for RTC */ -#define IPR_EMIQ (1 << EMIQ_IRQ_NUM) /* Emulator Interrupt */ - -/* '328-compatible definitions */ -#define IPR_SPIM IPR_SPI -#define IPR_TMR1 IPR_TMR - -/********** - * - * 0xFFFFF4xx -- Parallel Ports - * - **********/ - -/* - * Port A - */ -#define PADIR_ADDR 0xfffff400 /* Port A direction reg */ -#define PADATA_ADDR 0xfffff401 /* Port A data register */ -#define PAPUEN_ADDR 0xfffff402 /* Port A Pull-Up enable reg */ - -#define PADIR BYTE_REF(PADIR_ADDR) -#define PADATA BYTE_REF(PADATA_ADDR) -#define PAPUEN BYTE_REF(PAPUEN_ADDR) - -#define PA(x) (1 << (x)) - -/* - * Port B - */ -#define PBDIR_ADDR 0xfffff408 /* Port B direction reg */ -#define PBDATA_ADDR 0xfffff409 /* Port B data register */ -#define PBPUEN_ADDR 0xfffff40a /* Port B Pull-Up enable reg */ -#define PBSEL_ADDR 0xfffff40b /* Port B Select Register */ - -#define PBDIR BYTE_REF(PBDIR_ADDR) -#define PBDATA BYTE_REF(PBDATA_ADDR) -#define PBPUEN BYTE_REF(PBPUEN_ADDR) -#define PBSEL BYTE_REF(PBSEL_ADDR) - -#define PB(x) (1 << (x)) - -#define PB_CSB0 0x01 /* Use CSB0 as PB[0] */ -#define PB_CSB1 0x02 /* Use CSB1 as PB[1] */ -#define PB_CSC0_RAS0 0x04 /* Use CSC0/RAS0 as PB[2] */ -#define PB_CSC1_RAS1 0x08 /* Use CSC1/RAS1 as PB[3] */ -#define PB_CSD0_CAS0 0x10 /* Use CSD0/CAS0 as PB[4] */ -#define PB_CSD1_CAS1 0x20 /* Use CSD1/CAS1 as PB[5] */ -#define PB_TIN_TOUT 0x40 /* Use TIN/TOUT as PB[6] */ -#define PB_PWMO 0x80 /* Use PWMO as PB[7] */ - -/* - * Port C - */ -#define PCDIR_ADDR 0xfffff410 /* Port C direction reg */ -#define PCDATA_ADDR 0xfffff411 /* Port C data register */ -#define PCPDEN_ADDR 0xfffff412 /* Port C Pull-Down enb. reg */ -#define PCSEL_ADDR 0xfffff413 /* Port C Select Register */ - -#define PCDIR BYTE_REF(PCDIR_ADDR) -#define PCDATA BYTE_REF(PCDATA_ADDR) -#define PCPDEN BYTE_REF(PCPDEN_ADDR) -#define PCSEL BYTE_REF(PCSEL_ADDR) - -#define PC(x) (1 << (x)) - -#define PC_LD0 0x01 /* Use LD0 as PC[0] */ -#define PC_LD1 0x02 /* Use LD1 as PC[1] */ -#define PC_LD2 0x04 /* Use LD2 as PC[2] */ -#define PC_LD3 0x08 /* Use LD3 as PC[3] */ -#define PC_LFLM 0x10 /* Use LFLM as PC[4] */ -#define PC_LLP 0x20 /* Use LLP as PC[5] */ -#define PC_LCLK 0x40 /* Use LCLK as PC[6] */ -#define PC_LACD 0x80 /* Use LACD as PC[7] */ - -/* - * Port D - */ -#define PDDIR_ADDR 0xfffff418 /* Port D direction reg */ -#define PDDATA_ADDR 0xfffff419 /* Port D data register */ -#define PDPUEN_ADDR 0xfffff41a /* Port D Pull-Up enable reg */ -#define PDSEL_ADDR 0xfffff41b /* Port D Select Register */ -#define PDPOL_ADDR 0xfffff41c /* Port D Polarity Register */ -#define PDIRQEN_ADDR 0xfffff41d /* Port D IRQ enable register */ -#define PDKBEN_ADDR 0xfffff41e /* Port D Keyboard Enable reg */ -#define PDIQEG_ADDR 0xfffff41f /* Port D IRQ Edge Register */ - -#define PDDIR BYTE_REF(PDDIR_ADDR) -#define PDDATA BYTE_REF(PDDATA_ADDR) -#define PDPUEN BYTE_REF(PDPUEN_ADDR) -#define PDSEL BYTE_REF(PDSEL_ADDR) -#define PDPOL BYTE_REF(PDPOL_ADDR) -#define PDIRQEN BYTE_REF(PDIRQEN_ADDR) -#define PDKBEN BYTE_REF(PDKBEN_ADDR) -#define PDIQEG BYTE_REF(PDIQEG_ADDR) - -#define PD(x) (1 << (x)) - -#define PD_INT0 0x01 /* Use INT0 as PD[0] */ -#define PD_INT1 0x02 /* Use INT1 as PD[1] */ -#define PD_INT2 0x04 /* Use INT2 as PD[2] */ -#define PD_INT3 0x08 /* Use INT3 as PD[3] */ -#define PD_IRQ1 0x10 /* Use IRQ1 as PD[4] */ -#define PD_IRQ2 0x20 /* Use IRQ2 as PD[5] */ -#define PD_IRQ3 0x40 /* Use IRQ3 as PD[6] */ -#define PD_IRQ6 0x80 /* Use IRQ6 as PD[7] */ - -/* - * Port E - */ -#define PEDIR_ADDR 0xfffff420 /* Port E direction reg */ -#define PEDATA_ADDR 0xfffff421 /* Port E data register */ -#define PEPUEN_ADDR 0xfffff422 /* Port E Pull-Up enable reg */ -#define PESEL_ADDR 0xfffff423 /* Port E Select Register */ - -#define PEDIR BYTE_REF(PEDIR_ADDR) -#define PEDATA BYTE_REF(PEDATA_ADDR) -#define PEPUEN BYTE_REF(PEPUEN_ADDR) -#define PESEL BYTE_REF(PESEL_ADDR) - -#define PE(x) (1 << (x)) - -#define PE_SPMTXD 0x01 /* Use SPMTXD as PE[0] */ -#define PE_SPMRXD 0x02 /* Use SPMRXD as PE[1] */ -#define PE_SPMCLK 0x04 /* Use SPMCLK as PE[2] */ -#define PE_DWE 0x08 /* Use DWE as PE[3] */ -#define PE_RXD 0x10 /* Use RXD as PE[4] */ -#define PE_TXD 0x20 /* Use TXD as PE[5] */ -#define PE_RTS 0x40 /* Use RTS as PE[6] */ -#define PE_CTS 0x80 /* Use CTS as PE[7] */ - -/* - * Port F - */ -#define PFDIR_ADDR 0xfffff428 /* Port F direction reg */ -#define PFDATA_ADDR 0xfffff429 /* Port F data register */ -#define PFPUEN_ADDR 0xfffff42a /* Port F Pull-Up enable reg */ -#define PFSEL_ADDR 0xfffff42b /* Port F Select Register */ - -#define PFDIR BYTE_REF(PFDIR_ADDR) -#define PFDATA BYTE_REF(PFDATA_ADDR) -#define PFPUEN BYTE_REF(PFPUEN_ADDR) -#define PFSEL BYTE_REF(PFSEL_ADDR) - -#define PF(x) (1 << (x)) - -#define PF_LCONTRAST 0x01 /* Use LCONTRAST as PF[0] */ -#define PF_IRQ5 0x02 /* Use IRQ5 as PF[1] */ -#define PF_CLKO 0x04 /* Use CLKO as PF[2] */ -#define PF_A20 0x08 /* Use A20 as PF[3] */ -#define PF_A21 0x10 /* Use A21 as PF[4] */ -#define PF_A22 0x20 /* Use A22 as PF[5] */ -#define PF_A23 0x40 /* Use A23 as PF[6] */ -#define PF_CSA1 0x80 /* Use CSA1 as PF[7] */ - -/* - * Port G - */ -#define PGDIR_ADDR 0xfffff430 /* Port G direction reg */ -#define PGDATA_ADDR 0xfffff431 /* Port G data register */ -#define PGPUEN_ADDR 0xfffff432 /* Port G Pull-Up enable reg */ -#define PGSEL_ADDR 0xfffff433 /* Port G Select Register */ - -#define PGDIR BYTE_REF(PGDIR_ADDR) -#define PGDATA BYTE_REF(PGDATA_ADDR) -#define PGPUEN BYTE_REF(PGPUEN_ADDR) -#define PGSEL BYTE_REF(PGSEL_ADDR) - -#define PG(x) (1 << (x)) - -#define PG_BUSW_DTACK 0x01 /* Use BUSW/DTACK as PG[0] */ -#define PG_A0 0x02 /* Use A0 as PG[1] */ -#define PG_EMUIRQ 0x04 /* Use EMUIRQ as PG[2] */ -#define PG_HIZ_P_D 0x08 /* Use HIZ/P/D as PG[3] */ -#define PG_EMUCS 0x10 /* Use EMUCS as PG[4] */ -#define PG_EMUBRK 0x20 /* Use EMUBRK as PG[5] */ - -/* - * Port J - */ -#define PJDIR_ADDR 0xfffff438 /* Port J direction reg */ -#define PJDATA_ADDR 0xfffff439 /* Port J data register */ -#define PJPUEN_ADDR 0xfffff43A /* Port J Pull-Up enb. reg */ -#define PJSEL_ADDR 0xfffff43B /* Port J Select Register */ - -#define PJDIR BYTE_REF(PJDIR_ADDR) -#define PJDATA BYTE_REF(PJDATA_ADDR) -#define PJPUEN BYTE_REF(PJPUEN_ADDR) -#define PJSEL BYTE_REF(PJSEL_ADDR) - -#define PJ(x) (1 << (x)) - -/* - * Port K - */ -#define PKDIR_ADDR 0xfffff440 /* Port K direction reg */ -#define PKDATA_ADDR 0xfffff441 /* Port K data register */ -#define PKPUEN_ADDR 0xfffff442 /* Port K Pull-Up enb. reg */ -#define PKSEL_ADDR 0xfffff443 /* Port K Select Register */ - -#define PKDIR BYTE_REF(PKDIR_ADDR) -#define PKDATA BYTE_REF(PKDATA_ADDR) -#define PKPUEN BYTE_REF(PKPUEN_ADDR) -#define PKSEL BYTE_REF(PKSEL_ADDR) - -#define PK(x) (1 << (x)) - -#define PK_DATAREADY 0x01 /* Use ~DATA_READY as PK[0] */ -#define PK_PWM2 0x01 /* Use PWM2 as PK[0] */ -#define PK_R_W 0x02 /* Use R/W as PK[1] */ -#define PK_LDS 0x04 /* Use /LDS as PK[2] */ -#define PK_UDS 0x08 /* Use /UDS as PK[3] */ -#define PK_LD4 0x10 /* Use LD4 as PK[4] */ -#define PK_LD5 0x20 /* Use LD5 as PK[5] */ -#define PK_LD6 0x40 /* Use LD6 as PK[6] */ -#define PK_LD7 0x80 /* Use LD7 as PK[7] */ - -#define PJDIR_ADDR 0xfffff438 /* Port J direction reg */ -#define PJDATA_ADDR 0xfffff439 /* Port J data register */ -#define PJPUEN_ADDR 0xfffff43A /* Port J Pull-Up enable reg */ -#define PJSEL_ADDR 0xfffff43B /* Port J Select Register */ - -#define PJDIR BYTE_REF(PJDIR_ADDR) -#define PJDATA BYTE_REF(PJDATA_ADDR) -#define PJPUEN BYTE_REF(PJPUEN_ADDR) -#define PJSEL BYTE_REF(PJSEL_ADDR) - -#define PJ(x) (1 << (x)) - -#define PJ_MOSI 0x01 /* Use MOSI as PJ[0] */ -#define PJ_MISO 0x02 /* Use MISO as PJ[1] */ -#define PJ_SPICLK1 0x04 /* Use SPICLK1 as PJ[2] */ -#define PJ_SS 0x08 /* Use SS as PJ[3] */ -#define PJ_RXD2 0x10 /* Use RXD2 as PJ[4] */ -#define PJ_TXD2 0x20 /* Use TXD2 as PJ[5] */ -#define PJ_RTS2 0x40 /* Use RTS2 as PJ[5] */ -#define PJ_CTS2 0x80 /* Use CTS2 as PJ[5] */ - -/* - * Port M - */ -#define PMDIR_ADDR 0xfffff448 /* Port M direction reg */ -#define PMDATA_ADDR 0xfffff449 /* Port M data register */ -#define PMPUEN_ADDR 0xfffff44a /* Port M Pull-Up enable reg */ -#define PMSEL_ADDR 0xfffff44b /* Port M Select Register */ - -#define PMDIR BYTE_REF(PMDIR_ADDR) -#define PMDATA BYTE_REF(PMDATA_ADDR) -#define PMPUEN BYTE_REF(PMPUEN_ADDR) -#define PMSEL BYTE_REF(PMSEL_ADDR) - -#define PM(x) (1 << (x)) - -#define PM_SDCLK 0x01 /* Use SDCLK as PM[0] */ -#define PM_SDCE 0x02 /* Use SDCE as PM[1] */ -#define PM_DQMH 0x04 /* Use DQMH as PM[2] */ -#define PM_DQML 0x08 /* Use DQML as PM[3] */ -#define PM_SDA10 0x10 /* Use SDA10 as PM[4] */ -#define PM_DMOE 0x20 /* Use DMOE as PM[5] */ - -/********** - * - * 0xFFFFF5xx -- Pulse-Width Modulator (PWM) - * - **********/ - -/* - * PWM Control Register - */ -#define PWMC_ADDR 0xfffff500 -#define PWMC WORD_REF(PWMC_ADDR) - -#define PWMC_CLKSEL_MASK 0x0003 /* Clock Selection */ -#define PWMC_CLKSEL_SHIFT 0 -#define PWMC_REPEAT_MASK 0x000c /* Sample Repeats */ -#define PWMC_REPEAT_SHIFT 2 -#define PWMC_EN 0x0010 /* Enable PWM */ -#define PMNC_FIFOAV 0x0020 /* FIFO Available */ -#define PWMC_IRQEN 0x0040 /* Interrupt Request Enable */ -#define PWMC_IRQ 0x0080 /* Interrupt Request (FIFO empty) */ -#define PWMC_PRESCALER_MASK 0x7f00 /* Incoming Clock prescaler */ -#define PWMC_PRESCALER_SHIFT 8 -#define PWMC_CLKSRC 0x8000 /* Clock Source Select */ - -/* '328-compatible definitions */ -#define PWMC_PWMEN PWMC_EN - -/* - * PWM Sample Register - */ -#define PWMS_ADDR 0xfffff502 -#define PWMS WORD_REF(PWMS_ADDR) - -/* - * PWM Period Register - */ -#define PWMP_ADDR 0xfffff504 -#define PWMP BYTE_REF(PWMP_ADDR) - -/* - * PWM Counter Register - */ -#define PWMCNT_ADDR 0xfffff505 -#define PWMCNT BYTE_REF(PWMCNT_ADDR) - -/********** - * - * 0xFFFFF6xx -- General-Purpose Timer - * - **********/ - -/* - * Timer Control register - */ -#define TCTL_ADDR 0xfffff600 -#define TCTL WORD_REF(TCTL_ADDR) - -#define TCTL_TEN 0x0001 /* Timer Enable */ -#define TCTL_CLKSOURCE_MASK 0x000e /* Clock Source: */ -#define TCTL_CLKSOURCE_STOP 0x0000 /* Stop count (disabled) */ -#define TCTL_CLKSOURCE_SYSCLK 0x0002 /* SYSCLK to prescaler */ -#define TCTL_CLKSOURCE_SYSCLK_16 0x0004 /* SYSCLK/16 to prescaler */ -#define TCTL_CLKSOURCE_TIN 0x0006 /* TIN to prescaler */ -#define TCTL_CLKSOURCE_32KHZ 0x0008 /* 32kHz clock to prescaler */ -#define TCTL_IRQEN 0x0010 /* IRQ Enable */ -#define TCTL_OM 0x0020 /* Output Mode */ -#define TCTL_CAP_MASK 0x00c0 /* Capture Edge: */ -#define TCTL_CAP_RE 0x0040 /* Capture on rizing edge */ -#define TCTL_CAP_FE 0x0080 /* Capture on falling edge */ -#define TCTL_FRR 0x0010 /* Free-Run Mode */ - -/* '328-compatible definitions */ -#define TCTL1_ADDR TCTL_ADDR -#define TCTL1 TCTL - -/* - * Timer Prescaler Register - */ -#define TPRER_ADDR 0xfffff602 -#define TPRER WORD_REF(TPRER_ADDR) - -/* '328-compatible definitions */ -#define TPRER1_ADDR TPRER_ADDR -#define TPRER1 TPRER - -/* - * Timer Compare Register - */ -#define TCMP_ADDR 0xfffff604 -#define TCMP WORD_REF(TCMP_ADDR) - -/* '328-compatible definitions */ -#define TCMP1_ADDR TCMP_ADDR -#define TCMP1 TCMP - -/* - * Timer Capture register - */ -#define TCR_ADDR 0xfffff606 -#define TCR WORD_REF(TCR_ADDR) - -/* '328-compatible definitions */ -#define TCR1_ADDR TCR_ADDR -#define TCR1 TCR - -/* - * Timer Counter Register - */ -#define TCN_ADDR 0xfffff608 -#define TCN WORD_REF(TCN_ADDR) - -/* '328-compatible definitions */ -#define TCN1_ADDR TCN_ADDR -#define TCN1 TCN - -/* - * Timer Status Register - */ -#define TSTAT_ADDR 0xfffff60a -#define TSTAT WORD_REF(TSTAT_ADDR) - -#define TSTAT_COMP 0x0001 /* Compare Event occurred */ -#define TSTAT_CAPT 0x0001 /* Capture Event occurred */ - -/* '328-compatible definitions */ -#define TSTAT1_ADDR TSTAT_ADDR -#define TSTAT1 TSTAT - -/********** - * - * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM) - * - **********/ - -/* - * SPIM Data Register - */ -#define SPIMDATA_ADDR 0xfffff800 -#define SPIMDATA WORD_REF(SPIMDATA_ADDR) - -/* - * SPIM Control/Status Register - */ -#define SPIMCONT_ADDR 0xfffff802 -#define SPIMCONT WORD_REF(SPIMCONT_ADDR) - -#define SPIMCONT_BIT_COUNT_MASK 0x000f /* Transfer Length in Bytes */ -#define SPIMCONT_BIT_COUNT_SHIFT 0 -#define SPIMCONT_POL 0x0010 /* SPMCLK Signel Polarity */ -#define SPIMCONT_PHA 0x0020 /* Clock/Data phase relationship */ -#define SPIMCONT_IRQEN 0x0040 /* IRQ Enable */ -#define SPIMCONT_IRQ 0x0080 /* Interrupt Request */ -#define SPIMCONT_XCH 0x0100 /* Exchange */ -#define SPIMCONT_ENABLE 0x0200 /* Enable SPIM */ -#define SPIMCONT_DATA_RATE_MASK 0xe000 /* SPIM Data Rate */ -#define SPIMCONT_DATA_RATE_SHIFT 13 - -/* '328-compatible definitions */ -#define SPIMCONT_SPIMIRQ SPIMCONT_IRQ -#define SPIMCONT_SPIMEN SPIMCONT_ENABLE - -/********** - * - * 0xFFFFF9xx -- UART - * - **********/ - -/* - * UART Status/Control Register - */ - -#define USTCNT_ADDR 0xfffff900 -#define USTCNT WORD_REF(USTCNT_ADDR) - -#define USTCNT_TXAE 0x0001 /* Transmitter Available Interrupt Enable */ -#define USTCNT_TXHE 0x0002 /* Transmitter Half Empty Enable */ -#define USTCNT_TXEE 0x0004 /* Transmitter Empty Interrupt Enable */ -#define USTCNT_RXRE 0x0008 /* Receiver Ready Interrupt Enable */ -#define USTCNT_RXHE 0x0010 /* Receiver Half-Full Interrupt Enable */ -#define USTCNT_RXFE 0x0020 /* Receiver Full Interrupt Enable */ -#define USTCNT_CTSD 0x0040 /* CTS Delta Interrupt Enable */ -#define USTCNT_ODEN 0x0080 /* Old Data Interrupt Enable */ -#define USTCNT_8_7 0x0100 /* Eight or seven-bit transmission */ -#define USTCNT_STOP 0x0200 /* Stop bit transmission */ -#define USTCNT_ODD 0x0400 /* Odd Parity */ -#define USTCNT_PEN 0x0800 /* Parity Enable */ -#define USTCNT_CLKM 0x1000 /* Clock Mode Select */ -#define USTCNT_TXEN 0x2000 /* Transmitter Enable */ -#define USTCNT_RXEN 0x4000 /* Receiver Enable */ -#define USTCNT_UEN 0x8000 /* UART Enable */ - -/* '328-compatible definitions */ -#define USTCNT_TXAVAILEN USTCNT_TXAE -#define USTCNT_TXHALFEN USTCNT_TXHE -#define USTCNT_TXEMPTYEN USTCNT_TXEE -#define USTCNT_RXREADYEN USTCNT_RXRE -#define USTCNT_RXHALFEN USTCNT_RXHE -#define USTCNT_RXFULLEN USTCNT_RXFE -#define USTCNT_CTSDELTAEN USTCNT_CTSD -#define USTCNT_ODD_EVEN USTCNT_ODD -#define USTCNT_PARITYEN USTCNT_PEN -#define USTCNT_CLKMODE USTCNT_CLKM -#define USTCNT_UARTEN USTCNT_UEN - -/* - * UART Baud Control Register - */ -#define UBAUD_ADDR 0xfffff902 -#define UBAUD WORD_REF(UBAUD_ADDR) - -#define UBAUD_PRESCALER_MASK 0x003f /* Actual divisor is 65 - PRESCALER */ -#define UBAUD_PRESCALER_SHIFT 0 -#define UBAUD_DIVIDE_MASK 0x0700 /* Baud Rate freq. divizor */ -#define UBAUD_DIVIDE_SHIFT 8 -#define UBAUD_BAUD_SRC 0x0800 /* Baud Rate Source */ -#define UBAUD_UCLKDIR 0x2000 /* UCLK Direction */ - -/* - * UART Receiver Register - */ -#define URX_ADDR 0xfffff904 -#define URX WORD_REF(URX_ADDR) - -#define URX_RXDATA_ADDR 0xfffff905 -#define URX_RXDATA BYTE_REF(URX_RXDATA_ADDR) - -#define URX_RXDATA_MASK 0x00ff /* Received data */ -#define URX_RXDATA_SHIFT 0 -#define URX_PARITY_ERROR 0x0100 /* Parity Error */ -#define URX_BREAK 0x0200 /* Break Detected */ -#define URX_FRAME_ERROR 0x0400 /* Framing Error */ -#define URX_OVRUN 0x0800 /* Serial Overrun */ -#define URX_OLD_DATA 0x1000 /* Old data in FIFO */ -#define URX_DATA_READY 0x2000 /* Data Ready (FIFO not empty) */ -#define URX_FIFO_HALF 0x4000 /* FIFO is Half-Full */ -#define URX_FIFO_FULL 0x8000 /* FIFO is Full */ - -/* - * UART Transmitter Register - */ -#define UTX_ADDR 0xfffff906 -#define UTX WORD_REF(UTX_ADDR) - -#define UTX_TXDATA_ADDR 0xfffff907 -#define UTX_TXDATA BYTE_REF(UTX_TXDATA_ADDR) - -#define UTX_TXDATA_MASK 0x00ff /* Data to be transmitted */ -#define UTX_TXDATA_SHIFT 0 -#define UTX_CTS_DELTA 0x0100 /* CTS changed */ -#define UTX_CTS_STAT 0x0200 /* CTS State */ -#define UTX_BUSY 0x0400 /* FIFO is busy, sending a character */ -#define UTX_NOCTS 0x0800 /* Ignore CTS */ -#define UTX_SEND_BREAK 0x1000 /* Send a BREAK */ -#define UTX_TX_AVAIL 0x2000 /* Transmit FIFO has a slot available */ -#define UTX_FIFO_HALF 0x4000 /* Transmit FIFO is half empty */ -#define UTX_FIFO_EMPTY 0x8000 /* Transmit FIFO is empty */ - -/* '328-compatible definitions */ -#define UTX_CTS_STATUS UTX_CTS_STAT -#define UTX_IGNORE_CTS UTX_NOCTS - -/* - * UART Miscellaneous Register - */ -#define UMISC_ADDR 0xfffff908 -#define UMISC WORD_REF(UMISC_ADDR) - -#define UMISC_TX_POL 0x0004 /* Transmit Polarity */ -#define UMISC_RX_POL 0x0008 /* Receive Polarity */ -#define UMISC_IRDA_LOOP 0x0010 /* IrDA Loopback Enable */ -#define UMISC_IRDA_EN 0x0020 /* Infra-Red Enable */ -#define UMISC_RTS 0x0040 /* Set RTS status */ -#define UMISC_RTSCONT 0x0080 /* Choose RTS control */ -#define UMISC_IR_TEST 0x0400 /* IRDA Test Enable */ -#define UMISC_BAUD_RESET 0x0800 /* Reset Baud Rate Generation Counters */ -#define UMISC_LOOP 0x1000 /* Serial Loopback Enable */ -#define UMISC_FORCE_PERR 0x2000 /* Force Parity Error */ -#define UMISC_CLKSRC 0x4000 /* Clock Source */ -#define UMISC_BAUD_TEST 0x8000 /* Enable Baud Test Mode */ - -/* - * UART Non-integer Prescaler Register - */ -#define NIPR_ADDR 0xfffff90a -#define NIPR WORD_REF(NIPR_ADDR) - -#define NIPR_STEP_VALUE_MASK 0x00ff /* NI prescaler step value */ -#define NIPR_STEP_VALUE_SHIFT 0 -#define NIPR_SELECT_MASK 0x0700 /* Tap Selection */ -#define NIPR_SELECT_SHIFT 8 -#define NIPR_PRE_SEL 0x8000 /* Non-integer prescaler select */ - - -/* generalization of uart control registers to support multiple ports: */ -typedef struct { - volatile unsigned short int ustcnt; - volatile unsigned short int ubaud; - union { - volatile unsigned short int w; - struct { - volatile unsigned char status; - volatile unsigned char rxdata; - } b; - } urx; - union { - volatile unsigned short int w; - struct { - volatile unsigned char status; - volatile unsigned char txdata; - } b; - } utx; - volatile unsigned short int umisc; - volatile unsigned short int nipr; - volatile unsigned short int hmark; - volatile unsigned short int unused; -} __attribute__((packed)) m68328_uart; - - - - -/********** - * - * 0xFFFFFAxx -- LCD Controller - * - **********/ - -/* - * LCD Screen Starting Address Register - */ -#define LSSA_ADDR 0xfffffa00 -#define LSSA LONG_REF(LSSA_ADDR) - -#define LSSA_SSA_MASK 0x1ffffffe /* Bits 0 and 29-31 are reserved */ - -/* - * LCD Virtual Page Width Register - */ -#define LVPW_ADDR 0xfffffa05 -#define LVPW BYTE_REF(LVPW_ADDR) - -/* - * LCD Screen Width Register (not compatible with '328 !!!) - */ -#define LXMAX_ADDR 0xfffffa08 -#define LXMAX WORD_REF(LXMAX_ADDR) - -#define LXMAX_XM_MASK 0x02f0 /* Bits 0-3 and 10-15 are reserved */ - -/* - * LCD Screen Height Register - */ -#define LYMAX_ADDR 0xfffffa0a -#define LYMAX WORD_REF(LYMAX_ADDR) - -#define LYMAX_YM_MASK 0x01ff /* Bits 9-15 are reserved */ - -/* - * LCD Cursor X Position Register - */ -#define LCXP_ADDR 0xfffffa18 -#define LCXP WORD_REF(LCXP_ADDR) - -#define LCXP_CC_MASK 0xc000 /* Cursor Control */ -#define LCXP_CC_TRAMSPARENT 0x0000 -#define LCXP_CC_BLACK 0x4000 -#define LCXP_CC_REVERSED 0x8000 -#define LCXP_CC_WHITE 0xc000 -#define LCXP_CXP_MASK 0x02ff /* Cursor X position */ - -/* - * LCD Cursor Y Position Register - */ -#define LCYP_ADDR 0xfffffa1a -#define LCYP WORD_REF(LCYP_ADDR) - -#define LCYP_CYP_MASK 0x01ff /* Cursor Y Position */ - -/* - * LCD Cursor Width and Heigth Register - */ -#define LCWCH_ADDR 0xfffffa1c -#define LCWCH WORD_REF(LCWCH_ADDR) - -#define LCWCH_CH_MASK 0x001f /* Cursor Height */ -#define LCWCH_CH_SHIFT 0 -#define LCWCH_CW_MASK 0x1f00 /* Cursor Width */ -#define LCWCH_CW_SHIFT 8 - -/* - * LCD Blink Control Register - */ -#define LBLKC_ADDR 0xfffffa1f -#define LBLKC BYTE_REF(LBLKC_ADDR) - -#define LBLKC_BD_MASK 0x7f /* Blink Divisor */ -#define LBLKC_BD_SHIFT 0 -#define LBLKC_BKEN 0x80 /* Blink Enabled */ - -/* - * LCD Panel Interface Configuration Register - */ -#define LPICF_ADDR 0xfffffa20 -#define LPICF BYTE_REF(LPICF_ADDR) - -#define LPICF_GS_MASK 0x03 /* Gray-Scale Mode */ -#define LPICF_GS_BW 0x00 -#define LPICF_GS_GRAY_4 0x01 -#define LPICF_GS_GRAY_16 0x02 -#define LPICF_PBSIZ_MASK 0x0c /* Panel Bus Width */ -#define LPICF_PBSIZ_1 0x00 -#define LPICF_PBSIZ_2 0x04 -#define LPICF_PBSIZ_4 0x08 - -/* - * LCD Polarity Configuration Register - */ -#define LPOLCF_ADDR 0xfffffa21 -#define LPOLCF BYTE_REF(LPOLCF_ADDR) - -#define LPOLCF_PIXPOL 0x01 /* Pixel Polarity */ -#define LPOLCF_LPPOL 0x02 /* Line Pulse Polarity */ -#define LPOLCF_FLMPOL 0x04 /* Frame Marker Polarity */ -#define LPOLCF_LCKPOL 0x08 /* LCD Shift Lock Polarity */ - -/* - * LACD (LCD Alternate Crystal Direction) Rate Control Register - */ -#define LACDRC_ADDR 0xfffffa23 -#define LACDRC BYTE_REF(LACDRC_ADDR) - -#define LACDRC_ACDSLT 0x80 /* Signal Source Select */ -#define LACDRC_ACD_MASK 0x0f /* Alternate Crystal Direction Control */ -#define LACDRC_ACD_SHIFT 0 - -/* - * LCD Pixel Clock Divider Register - */ -#define LPXCD_ADDR 0xfffffa25 -#define LPXCD BYTE_REF(LPXCD_ADDR) - -#define LPXCD_PCD_MASK 0x3f /* Pixel Clock Divider */ -#define LPXCD_PCD_SHIFT 0 - -/* - * LCD Clocking Control Register - */ -#define LCKCON_ADDR 0xfffffa27 -#define LCKCON BYTE_REF(LCKCON_ADDR) - -#define LCKCON_DWS_MASK 0x0f /* Display Wait-State */ -#define LCKCON_DWS_SHIFT 0 -#define LCKCON_DWIDTH 0x40 /* Display Memory Width */ -#define LCKCON_LCDON 0x80 /* Enable LCD Controller */ - -/* '328-compatible definitions */ -#define LCKCON_DW_MASK LCKCON_DWS_MASK -#define LCKCON_DW_SHIFT LCKCON_DWS_SHIFT - -/* - * LCD Refresh Rate Adjustment Register - */ -#define LRRA_ADDR 0xfffffa29 -#define LRRA BYTE_REF(LRRA_ADDR) - -/* - * LCD Panning Offset Register - */ -#define LPOSR_ADDR 0xfffffa2d -#define LPOSR BYTE_REF(LPOSR_ADDR) - -#define LPOSR_POS_MASK 0x0f /* Pixel Offset Code */ -#define LPOSR_POS_SHIFT 0 - -/* - * LCD Frame Rate Control Modulation Register - */ -#define LFRCM_ADDR 0xfffffa31 -#define LFRCM BYTE_REF(LFRCM_ADDR) - -#define LFRCM_YMOD_MASK 0x0f /* Vertical Modulation */ -#define LFRCM_YMOD_SHIFT 0 -#define LFRCM_XMOD_MASK 0xf0 /* Horizontal Modulation */ -#define LFRCM_XMOD_SHIFT 4 - -/* - * LCD Gray Palette Mapping Register - */ -#define LGPMR_ADDR 0xfffffa33 -#define LGPMR BYTE_REF(LGPMR_ADDR) - -#define LGPMR_G1_MASK 0x0f -#define LGPMR_G1_SHIFT 0 -#define LGPMR_G2_MASK 0xf0 -#define LGPMR_G2_SHIFT 4 - -/* - * PWM Contrast Control Register - */ -#define PWMR_ADDR 0xfffffa36 -#define PWMR WORD_REF(PWMR_ADDR) - -#define PWMR_PW_MASK 0x00ff /* Pulse Width */ -#define PWMR_PW_SHIFT 0 -#define PWMR_CCPEN 0x0100 /* Contrast Control Enable */ -#define PWMR_SRC_MASK 0x0600 /* Input Clock Source */ -#define PWMR_SRC_LINE 0x0000 /* Line Pulse */ -#define PWMR_SRC_PIXEL 0x0200 /* Pixel Clock */ -#define PWMR_SRC_LCD 0x4000 /* LCD clock */ - -/********** - * - * 0xFFFFFBxx -- Real-Time Clock (RTC) - * - **********/ - -/* - * RTC Hours Minutes and Seconds Register - */ -#define RTCTIME_ADDR 0xfffffb00 -#define RTCTIME LONG_REF(RTCTIME_ADDR) - -#define RTCTIME_SECONDS_MASK 0x0000003f /* Seconds */ -#define RTCTIME_SECONDS_SHIFT 0 -#define RTCTIME_MINUTES_MASK 0x003f0000 /* Minutes */ -#define RTCTIME_MINUTES_SHIFT 16 -#define RTCTIME_HOURS_MASK 0x1f000000 /* Hours */ -#define RTCTIME_HOURS_SHIFT 24 - -/* - * RTC Alarm Register - */ -#define RTCALRM_ADDR 0xfffffb04 -#define RTCALRM LONG_REF(RTCALRM_ADDR) - -#define RTCALRM_SECONDS_MASK 0x0000003f /* Seconds */ -#define RTCALRM_SECONDS_SHIFT 0 -#define RTCALRM_MINUTES_MASK 0x003f0000 /* Minutes */ -#define RTCALRM_MINUTES_SHIFT 16 -#define RTCALRM_HOURS_MASK 0x1f000000 /* Hours */ -#define RTCALRM_HOURS_SHIFT 24 - -/* - * Watchdog Timer Register - */ -#define WATCHDOG_ADDR 0xfffffb0a -#define WATCHDOG WORD_REF(WATCHDOG_ADDR) - -#define WATCHDOG_EN 0x0001 /* Watchdog Enabled */ -#define WATCHDOG_ISEL 0x0002 /* Select the watchdog interrupt */ -#define WATCHDOG_INTF 0x0080 /* Watchdog interrupt occcured */ -#define WATCHDOG_CNT_MASK 0x0300 /* Watchdog Counter */ -#define WATCHDOG_CNT_SHIFT 8 - -/* - * RTC Control Register - */ -#define RTCCTL_ADDR 0xfffffb0c -#define RTCCTL WORD_REF(RTCCTL_ADDR) - -#define RTCCTL_XTL 0x0020 /* Crystal Selection */ -#define RTCCTL_EN 0x0080 /* RTC Enable */ - -/* '328-compatible definitions */ -#define RTCCTL_384 RTCCTL_XTL -#define RTCCTL_ENABLE RTCCTL_EN - -/* - * RTC Interrupt Status Register - */ -#define RTCISR_ADDR 0xfffffb0e -#define RTCISR WORD_REF(RTCISR_ADDR) - -#define RTCISR_SW 0x0001 /* Stopwatch timed out */ -#define RTCISR_MIN 0x0002 /* 1-minute interrupt has occurred */ -#define RTCISR_ALM 0x0004 /* Alarm interrupt has occurred */ -#define RTCISR_DAY 0x0008 /* 24-hour rollover interrupt has occurred */ -#define RTCISR_1HZ 0x0010 /* 1Hz interrupt has occurred */ -#define RTCISR_HR 0x0020 /* 1-hour interrupt has occurred */ -#define RTCISR_SAM0 0x0100 /* 4Hz / 4.6875Hz interrupt has occurred */ -#define RTCISR_SAM1 0x0200 /* 8Hz / 9.3750Hz interrupt has occurred */ -#define RTCISR_SAM2 0x0400 /* 16Hz / 18.7500Hz interrupt has occurred */ -#define RTCISR_SAM3 0x0800 /* 32Hz / 37.5000Hz interrupt has occurred */ -#define RTCISR_SAM4 0x1000 /* 64Hz / 75.0000Hz interrupt has occurred */ -#define RTCISR_SAM5 0x2000 /* 128Hz / 150.0000Hz interrupt has occurred */ -#define RTCISR_SAM6 0x4000 /* 256Hz / 300.0000Hz interrupt has occurred */ -#define RTCISR_SAM7 0x8000 /* 512Hz / 600.0000Hz interrupt has occurred */ - -/* - * RTC Interrupt Enable Register - */ -#define RTCIENR_ADDR 0xfffffb10 -#define RTCIENR WORD_REF(RTCIENR_ADDR) - -#define RTCIENR_SW 0x0001 /* Stopwatch interrupt enable */ -#define RTCIENR_MIN 0x0002 /* 1-minute interrupt enable */ -#define RTCIENR_ALM 0x0004 /* Alarm interrupt enable */ -#define RTCIENR_DAY 0x0008 /* 24-hour rollover interrupt enable */ -#define RTCIENR_1HZ 0x0010 /* 1Hz interrupt enable */ -#define RTCIENR_HR 0x0020 /* 1-hour interrupt enable */ -#define RTCIENR_SAM0 0x0100 /* 4Hz / 4.6875Hz interrupt enable */ -#define RTCIENR_SAM1 0x0200 /* 8Hz / 9.3750Hz interrupt enable */ -#define RTCIENR_SAM2 0x0400 /* 16Hz / 18.7500Hz interrupt enable */ -#define RTCIENR_SAM3 0x0800 /* 32Hz / 37.5000Hz interrupt enable */ -#define RTCIENR_SAM4 0x1000 /* 64Hz / 75.0000Hz interrupt enable */ -#define RTCIENR_SAM5 0x2000 /* 128Hz / 150.0000Hz interrupt enable */ -#define RTCIENR_SAM6 0x4000 /* 256Hz / 300.0000Hz interrupt enable */ -#define RTCIENR_SAM7 0x8000 /* 512Hz / 600.0000Hz interrupt enable */ - -/* - * Stopwatch Minutes Register - */ -#define STPWCH_ADDR 0xfffffb12 -#define STPWCH WORD_REF(STPWCH_ADDR) - -#define STPWCH_CNT_MASK 0x003f /* Stopwatch countdown value */ -#define SPTWCH_CNT_SHIFT 0 - -/* - * RTC Day Count Register - */ -#define DAYR_ADDR 0xfffffb1a -#define DAYR WORD_REF(DAYR_ADDR) - -#define DAYR_DAYS_MASK 0x1ff /* Day Setting */ -#define DAYR_DAYS_SHIFT 0 - -/* - * RTC Day Alarm Register - */ -#define DAYALARM_ADDR 0xfffffb1c -#define DAYALARM WORD_REF(DAYALARM_ADDR) - -#define DAYALARM_DAYSAL_MASK 0x01ff /* Day Setting of the Alarm */ -#define DAYALARM_DAYSAL_SHIFT 0 - -/********** - * - * 0xFFFFFCxx -- DRAM Controller - * - **********/ - -/* - * DRAM Memory Configuration Register - */ -#define DRAMMC_ADDR 0xfffffc00 -#define DRAMMC WORD_REF(DRAMMC_ADDR) - -#define DRAMMC_ROW12_MASK 0xc000 /* Row address bit for MD12 */ -#define DRAMMC_ROW12_PA10 0x0000 -#define DRAMMC_ROW12_PA21 0x4000 -#define DRAMMC_ROW12_PA23 0x8000 -#define DRAMMC_ROW0_MASK 0x3000 /* Row address bit for MD0 */ -#define DRAMMC_ROW0_PA11 0x0000 -#define DRAMMC_ROW0_PA22 0x1000 -#define DRAMMC_ROW0_PA23 0x2000 -#define DRAMMC_ROW11 0x0800 /* Row address bit for MD11 PA20/PA22 */ -#define DRAMMC_ROW10 0x0400 /* Row address bit for MD10 PA19/PA21 */ -#define DRAMMC_ROW9 0x0200 /* Row address bit for MD9 PA9/PA19 */ -#define DRAMMC_ROW8 0x0100 /* Row address bit for MD8 PA10/PA20 */ -#define DRAMMC_COL10 0x0080 /* Col address bit for MD10 PA11/PA0 */ -#define DRAMMC_COL9 0x0040 /* Col address bit for MD9 PA10/PA0 */ -#define DRAMMC_COL8 0x0020 /* Col address bit for MD8 PA9/PA0 */ -#define DRAMMC_REF_MASK 0x001f /* Reresh Cycle */ -#define DRAMMC_REF_SHIFT 0 - -/* - * DRAM Control Register - */ -#define DRAMC_ADDR 0xfffffc02 -#define DRAMC WORD_REF(DRAMC_ADDR) - -#define DRAMC_DWE 0x0001 /* DRAM Write Enable */ -#define DRAMC_RST 0x0002 /* Reset Burst Refresh Enable */ -#define DRAMC_LPR 0x0004 /* Low-Power Refresh Enable */ -#define DRAMC_SLW 0x0008 /* Slow RAM */ -#define DRAMC_LSP 0x0010 /* Light Sleep */ -#define DRAMC_MSW 0x0020 /* Slow Multiplexing */ -#define DRAMC_WS_MASK 0x00c0 /* Wait-states */ -#define DRAMC_WS_SHIFT 6 -#define DRAMC_PGSZ_MASK 0x0300 /* Page Size for fast page mode */ -#define DRAMC_PGSZ_SHIFT 8 -#define DRAMC_PGSZ_256K 0x0000 -#define DRAMC_PGSZ_512K 0x0100 -#define DRAMC_PGSZ_1024K 0x0200 -#define DRAMC_PGSZ_2048K 0x0300 -#define DRAMC_EDO 0x0400 /* EDO DRAM */ -#define DRAMC_CLK 0x0800 /* Refresh Timer Clock source select */ -#define DRAMC_BC_MASK 0x3000 /* Page Access Clock Cycle (FP mode) */ -#define DRAMC_BC_SHIFT 12 -#define DRAMC_RM 0x4000 /* Refresh Mode */ -#define DRAMC_EN 0x8000 /* DRAM Controller enable */ - - -/********** - * - * 0xFFFFFDxx -- In-Circuit Emulation (ICE) - * - **********/ - -/* - * ICE Module Address Compare Register - */ -#define ICEMACR_ADDR 0xfffffd00 -#define ICEMACR LONG_REF(ICEMACR_ADDR) - -/* - * ICE Module Address Mask Register - */ -#define ICEMAMR_ADDR 0xfffffd04 -#define ICEMAMR LONG_REF(ICEMAMR_ADDR) - -/* - * ICE Module Control Compare Register - */ -#define ICEMCCR_ADDR 0xfffffd08 -#define ICEMCCR WORD_REF(ICEMCCR_ADDR) - -#define ICEMCCR_PD 0x0001 /* Program/Data Cycle Selection */ -#define ICEMCCR_RW 0x0002 /* Read/Write Cycle Selection */ - -/* - * ICE Module Control Mask Register - */ -#define ICEMCMR_ADDR 0xfffffd0a -#define ICEMCMR WORD_REF(ICEMCMR_ADDR) - -#define ICEMCMR_PDM 0x0001 /* Program/Data Cycle Mask */ -#define ICEMCMR_RWM 0x0002 /* Read/Write Cycle Mask */ - -/* - * ICE Module Control Register - */ -#define ICEMCR_ADDR 0xfffffd0c -#define ICEMCR WORD_REF(ICEMCR_ADDR) - -#define ICEMCR_CEN 0x0001 /* Compare Enable */ -#define ICEMCR_PBEN 0x0002 /* Program Break Enable */ -#define ICEMCR_SB 0x0004 /* Single Breakpoint */ -#define ICEMCR_HMDIS 0x0008 /* HardMap disable */ -#define ICEMCR_BBIEN 0x0010 /* Bus Break Interrupt Enable */ - -/* - * ICE Module Status Register - */ -#define ICEMSR_ADDR 0xfffffd0e -#define ICEMSR WORD_REF(ICEMSR_ADDR) - -#define ICEMSR_EMUEN 0x0001 /* Emulation Enable */ -#define ICEMSR_BRKIRQ 0x0002 /* A-Line Vector Fetch Detected */ -#define ICEMSR_BBIRQ 0x0004 /* Bus Break Interrupt Detected */ -#define ICEMSR_EMIRQ 0x0008 /* EMUIRQ Falling Edge Detected */ - -#endif /* _MC68VZ328_H_ */ diff --git a/arch/m68knommu/include/asm/anchor.h b/arch/m68knommu/include/asm/anchor.h deleted file mode 100644 index 871c0d5cfc3..00000000000 --- a/arch/m68knommu/include/asm/anchor.h +++ /dev/null @@ -1,112 +0,0 @@ -/****************************************************************************/ - -/* - * anchor.h -- Anchor CO-MEM Lite PCI host bridge part. - * - * (C) Copyright 2000, Moreton Bay (www.moreton.com.au) - */ - -/****************************************************************************/ -#ifndef anchor_h -#define anchor_h -/****************************************************************************/ - -/* - * Define basic addressing info. - */ -#if defined(CONFIG_M5407C3) -#define COMEM_BASE 0xFFFF0000 /* Base of CO-MEM address space */ -#define COMEM_IRQ 25 /* IRQ of anchor part */ -#else -#define COMEM_BASE 0x80000000 /* Base of CO-MEM address space */ -#define COMEM_IRQ 25 /* IRQ of anchor part */ -#endif - -/****************************************************************************/ - -/* - * 4-byte registers of CO-MEM, so adjust register addresses for - * easy access. Handy macro for word access too. - */ -#define LREG(a) ((a) >> 2) -#define WREG(a) ((a) >> 1) - - -/* - * Define base addresses within CO-MEM Lite register address space. - */ -#define COMEM_I2O 0x0000 /* I2O registers */ -#define COMEM_OPREGS 0x0400 /* Operation registers */ -#define COMEM_PCIBUS 0x2000 /* Direct access to PCI bus */ -#define COMEM_SHMEM 0x4000 /* Shared memory region */ - -#define COMEM_SHMEMSIZE 0x4000 /* Size of shared memory */ - - -/* - * Define CO-MEM Registers. - */ -#define COMEM_I2OHISR 0x0030 /* I2O host interrupt status */ -#define COMEM_I2OHIMR 0x0034 /* I2O host interrupt mask */ -#define COMEM_I2OLISR 0x0038 /* I2O local interrupt status */ -#define COMEM_I2OLIMR 0x003c /* I2O local interrupt mask */ -#define COMEM_IBFPFIFO 0x0040 /* I2O inbound free/post FIFO */ -#define COMEM_OBPFFIFO 0x0044 /* I2O outbound post/free FIFO */ -#define COMEM_IBPFFIFO 0x0048 /* I2O inbound post/free FIFO */ -#define COMEM_OBFPFIFO 0x004c /* I2O outbound free/post FIFO */ - -#define COMEM_DAHBASE 0x0460 /* Direct access base address */ - -#define COMEM_NVCMD 0x04a0 /* I2C serial command */ -#define COMEM_NVREAD 0x04a4 /* I2C serial read */ -#define COMEM_NVSTAT 0x04a8 /* I2C status */ - -#define COMEM_DMALBASE 0x04b0 /* DMA local base address */ -#define COMEM_DMAHBASE 0x04b4 /* DMA host base address */ -#define COMEM_DMASIZE 0x04b8 /* DMA size */ -#define COMEM_DMACTL 0x04bc /* DMA control */ - -#define COMEM_HCTL 0x04e0 /* Host control */ -#define COMEM_HINT 0x04e4 /* Host interrupt control/status */ -#define COMEM_HLDATA 0x04e8 /* Host to local data mailbox */ -#define COMEM_LINT 0x04f4 /* Local interrupt contole status */ -#define COMEM_LHDATA 0x04f8 /* Local to host data mailbox */ - -#define COMEM_LBUSCFG 0x04fc /* Local bus configuration */ - - -/* - * Commands and flags for use with Direct Access Register. - */ -#define COMEM_DA_IACK 0x00000000 /* Interrupt acknowledge (read) */ -#define COMEM_DA_SPCL 0x00000010 /* Special cycle (write) */ -#define COMEM_DA_MEMRD 0x00000004 /* Memory read cycle */ -#define COMEM_DA_MEMWR 0x00000004 /* Memory write cycle */ -#define COMEM_DA_IORD 0x00000002 /* I/O read cycle */ -#define COMEM_DA_IOWR 0x00000002 /* I/O write cycle */ -#define COMEM_DA_CFGRD 0x00000006 /* Configuration read cycle */ -#define COMEM_DA_CFGWR 0x00000006 /* Configuration write cycle */ - -#define COMEM_DA_ADDR(a) ((a) & 0xffffe000) - -#define COMEM_DA_OFFSET(a) ((a) & 0x00001fff) - - -/* - * The PCI bus will be limited in what slots will actually be used. - * Define valid device numbers for different boards. - */ -#if defined(CONFIG_M5407C3) -#define COMEM_MINDEV 14 /* Minimum valid DEVICE */ -#define COMEM_MAXDEV 14 /* Maximum valid DEVICE */ -#define COMEM_BRIDGEDEV 15 /* Slot bridge is in */ -#else -#define COMEM_MINDEV 0 /* Minimum valid DEVICE */ -#define COMEM_MAXDEV 3 /* Maximum valid DEVICE */ -#endif - -#define COMEM_MAXPCI (COMEM_MAXDEV+1) /* Maximum PCI devices */ - - -/****************************************************************************/ -#endif /* anchor_h */ diff --git a/arch/m68knommu/include/asm/atomic.h b/arch/m68knommu/include/asm/atomic.h deleted file mode 100644 index 6bb674855a3..00000000000 --- a/arch/m68knommu/include/asm/atomic.h +++ /dev/null @@ -1,155 +0,0 @@ -#ifndef __ARCH_M68KNOMMU_ATOMIC__ -#define __ARCH_M68KNOMMU_ATOMIC__ - -#include <linux/types.h> -#include <asm/system.h> - -/* - * Atomic operations that C can't guarantee us. Useful for - * resource counting etc.. - */ - -/* - * We do not have SMP m68k systems, so we don't have to deal with that. - */ - -#define ATOMIC_INIT(i) { (i) } - -#define atomic_read(v) ((v)->counter) -#define atomic_set(v, i) (((v)->counter) = i) - -static __inline__ void atomic_add(int i, atomic_t *v) -{ -#ifdef CONFIG_COLDFIRE - __asm__ __volatile__("addl %1,%0" : "+m" (*v) : "d" (i)); -#else - __asm__ __volatile__("addl %1,%0" : "+m" (*v) : "di" (i)); -#endif -} - -static __inline__ void atomic_sub(int i, atomic_t *v) -{ -#ifdef CONFIG_COLDFIRE - __asm__ __volatile__("subl %1,%0" : "+m" (*v) : "d" (i)); -#else - __asm__ __volatile__("subl %1,%0" : "+m" (*v) : "di" (i)); -#endif -} - -static __inline__ int atomic_sub_and_test(int i, atomic_t * v) -{ - char c; -#ifdef CONFIG_COLDFIRE - __asm__ __volatile__("subl %2,%1; seq %0" - : "=d" (c), "+m" (*v) - : "d" (i)); -#else - __asm__ __volatile__("subl %2,%1; seq %0" - : "=d" (c), "+m" (*v) - : "di" (i)); -#endif - return c != 0; -} - -static __inline__ void atomic_inc(volatile atomic_t *v) -{ - __asm__ __volatile__("addql #1,%0" : "+m" (*v)); -} - -/* - * atomic_inc_and_test - increment and test - * @v: pointer of type atomic_t - * - * Atomically increments @v by 1 - * and returns true if the result is zero, or false for all - * other cases. - */ - -static __inline__ int atomic_inc_and_test(volatile atomic_t *v) -{ - char c; - __asm__ __volatile__("addql #1,%1; seq %0" : "=d" (c), "+m" (*v)); - return c != 0; -} - -static __inline__ void atomic_dec(volatile atomic_t *v) -{ - __asm__ __volatile__("subql #1,%0" : "+m" (*v)); -} - -static __inline__ int atomic_dec_and_test(volatile atomic_t *v) -{ - char c; - __asm__ __volatile__("subql #1,%1; seq %0" : "=d" (c), "+m" (*v)); - return c != 0; -} - -static __inline__ void atomic_clear_mask(unsigned long mask, unsigned long *v) -{ - __asm__ __volatile__("andl %1,%0" : "+m" (*v) : "id" (~(mask))); -} - -static __inline__ void atomic_set_mask(unsigned long mask, unsigned long *v) -{ - __asm__ __volatile__("orl %1,%0" : "+m" (*v) : "id" (mask)); -} - -/* Atomic operations are already serializing */ -#define smp_mb__before_atomic_dec() barrier() -#define smp_mb__after_atomic_dec() barrier() -#define smp_mb__before_atomic_inc() barrier() -#define smp_mb__after_atomic_inc() barrier() - -static inline int atomic_add_return(int i, atomic_t * v) -{ - unsigned long temp, flags; - - local_irq_save(flags); - temp = *(long *)v; - temp += i; - *(long *)v = temp; - local_irq_restore(flags); - - return temp; -} - -#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0) - -static inline int atomic_sub_return(int i, atomic_t * v) -{ - unsigned long temp, flags; - - local_irq_save(flags); - temp = *(long *)v; - temp -= i; - *(long *)v = temp; - local_irq_restore(flags); - - return temp; -} - -#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n))) -#define atomic_xchg(v, new) (xchg(&((v)->counter), new)) - -static __inline__ int atomic_add_unless(atomic_t *v, int a, int u) -{ - int c, old; - c = atomic_read(v); - for (;;) { - if (unlikely(c == (u))) - break; - old = atomic_cmpxchg((v), c, c + (a)); - if (likely(old == c)) - break; - c = old; - } - return c != (u); -} - -#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) - -#define atomic_dec_return(v) atomic_sub_return(1,(v)) -#define atomic_inc_return(v) atomic_add_return(1,(v)) - -#include <asm-generic/atomic.h> -#endif /* __ARCH_M68KNOMMU_ATOMIC __ */ diff --git a/arch/m68knommu/include/asm/auxvec.h b/arch/m68knommu/include/asm/auxvec.h deleted file mode 100644 index 844d6d52204..00000000000 --- a/arch/m68knommu/include/asm/auxvec.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef __ASMm68k_AUXVEC_H -#define __ASMm68k_AUXVEC_H - -#endif diff --git a/arch/m68knommu/include/asm/bitops.h b/arch/m68knommu/include/asm/bitops.h deleted file mode 100644 index 9d3cbe5fad1..00000000000 --- a/arch/m68knommu/include/asm/bitops.h +++ /dev/null @@ -1,337 +0,0 @@ -#ifndef _M68KNOMMU_BITOPS_H -#define _M68KNOMMU_BITOPS_H - -/* - * Copyright 1992, Linus Torvalds. - */ - -#include <linux/compiler.h> -#include <asm/byteorder.h> /* swab32 */ - -#ifdef __KERNEL__ - -#ifndef _LINUX_BITOPS_H -#error only <linux/bitops.h> can be included directly -#endif - -#if defined (__mcfisaaplus__) || defined (__mcfisac__) -static inline int ffs(unsigned int val) -{ - if (!val) - return 0; - - asm volatile( - "bitrev %0\n\t" - "ff1 %0\n\t" - : "=d" (val) - : "0" (val) - ); - val++; - return val; -} - -static inline int __ffs(unsigned int val) -{ - asm volatile( - "bitrev %0\n\t" - "ff1 %0\n\t" - : "=d" (val) - : "0" (val) - ); - return val; -} - -#else -#include <asm-generic/bitops/ffs.h> -#include <asm-generic/bitops/__ffs.h> -#endif - -#include <asm-generic/bitops/sched.h> -#include <asm-generic/bitops/ffz.h> - -static __inline__ void set_bit(int nr, volatile unsigned long * addr) -{ -#ifdef CONFIG_COLDFIRE - __asm__ __volatile__ ("lea %0,%%a0; bset %1,(%%a0)" - : "+m" (((volatile char *)addr)[(nr^31) >> 3]) - : "d" (nr) - : "%a0", "cc"); -#else - __asm__ __volatile__ ("bset %1,%0" - : "+m" (((volatile char *)addr)[(nr^31) >> 3]) - : "di" (nr) - : "cc"); -#endif -} - -#define __set_bit(nr, addr) set_bit(nr, addr) - -/* - * clear_bit() doesn't provide any barrier for the compiler. - */ -#define smp_mb__before_clear_bit() barrier() -#define smp_mb__after_clear_bit() barrier() - -static __inline__ void clear_bit(int nr, volatile unsigned long * addr) -{ -#ifdef CONFIG_COLDFIRE - __asm__ __volatile__ ("lea %0,%%a0; bclr %1,(%%a0)" - : "+m" (((volatile char *)addr)[(nr^31) >> 3]) - : "d" (nr) - : "%a0", "cc"); -#else - __asm__ __volatile__ ("bclr %1,%0" - : "+m" (((volatile char *)addr)[(nr^31) >> 3]) - : "di" (nr) - : "cc"); -#endif -} - -#define __clear_bit(nr, addr) clear_bit(nr, addr) - -static __inline__ void change_bit(int nr, volatile unsigned long * addr) -{ -#ifdef CONFIG_COLDFIRE - __asm__ __volatile__ ("lea %0,%%a0; bchg %1,(%%a0)" - : "+m" (((volatile char *)addr)[(nr^31) >> 3]) - : "d" (nr) - : "%a0", "cc"); -#else - __asm__ __volatile__ ("bchg %1,%0" - : "+m" (((volatile char *)addr)[(nr^31) >> 3]) - : "di" (nr) - : "cc"); -#endif -} - -#define __change_bit(nr, addr) change_bit(nr, addr) - -static __inline__ int test_and_set_bit(int nr, volatile unsigned long * addr) -{ - char retval; - -#ifdef CONFIG_COLDFIRE - __asm__ __volatile__ ("lea %1,%%a0; bset %2,(%%a0); sne %0" - : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3]) - : "d" (nr) - : "%a0"); -#else - __asm__ __volatile__ ("bset %2,%1; sne %0" - : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3]) - : "di" (nr) - /* No clobber */); -#endif - - return retval; -} - -#define __test_and_set_bit(nr, addr) test_and_set_bit(nr, addr) - -static __inline__ int test_and_clear_bit(int nr, volatile unsigned long * addr) -{ - char retval; - -#ifdef CONFIG_COLDFIRE - __asm__ __volatile__ ("lea %1,%%a0; bclr %2,(%%a0); sne %0" - : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3]) - : "d" (nr) - : "%a0"); -#else - __asm__ __volatile__ ("bclr %2,%1; sne %0" - : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3]) - : "di" (nr) - /* No clobber */); -#endif - - return retval; -} - -#define __test_and_clear_bit(nr, addr) test_and_clear_bit(nr, addr) - -static __inline__ int test_and_change_bit(int nr, volatile unsigned long * addr) -{ - char retval; - -#ifdef CONFIG_COLDFIRE - __asm__ __volatile__ ("lea %1,%%a0\n\tbchg %2,(%%a0)\n\tsne %0" - : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3]) - : "d" (nr) - : "%a0"); -#else - __asm__ __volatile__ ("bchg %2,%1; sne %0" - : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3]) - : "di" (nr) - /* No clobber */); -#endif - - return retval; -} - -#define __test_and_change_bit(nr, addr) test_and_change_bit(nr, addr) - -/* - * This routine doesn't need to be atomic. - */ -static __inline__ int __constant_test_bit(int nr, const volatile unsigned long * addr) -{ - return ((1UL << (nr & 31)) & (((const volatile unsigned int *) addr)[nr >> 5])) != 0; -} - -static __inline__ int __test_bit(int nr, const volatile unsigned long * addr) -{ - int * a = (int *) addr; - int mask; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - return ((mask & *a) != 0); -} - -#define test_bit(nr,addr) \ -(__builtin_constant_p(nr) ? \ - __constant_test_bit((nr),(addr)) : \ - __test_bit((nr),(addr))) - -#include <asm-generic/bitops/find.h> -#include <asm-generic/bitops/hweight.h> -#include <asm-generic/bitops/lock.h> - -static __inline__ int ext2_set_bit(int nr, volatile void * addr) -{ - char retval; - -#ifdef CONFIG_COLDFIRE - __asm__ __volatile__ ("lea %1,%%a0; bset %2,(%%a0); sne %0" - : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3]) - : "d" (nr) - : "%a0"); -#else - __asm__ __volatile__ ("bset %2,%1; sne %0" - : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3]) - : "di" (nr) - /* No clobber */); -#endif - - return retval; -} - -static __inline__ int ext2_clear_bit(int nr, volatile void * addr) -{ - char retval; - -#ifdef CONFIG_COLDFIRE - __asm__ __volatile__ ("lea %1,%%a0; bclr %2,(%%a0); sne %0" - : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3]) - : "d" (nr) - : "%a0"); -#else - __asm__ __volatile__ ("bclr %2,%1; sne %0" - : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3]) - : "di" (nr) - /* No clobber */); -#endif - - return retval; -} - -#define ext2_set_bit_atomic(lock, nr, addr) \ - ({ \ - int ret; \ - spin_lock(lock); \ - ret = ext2_set_bit((nr), (addr)); \ - spin_unlock(lock); \ - ret; \ - }) - -#define ext2_clear_bit_atomic(lock, nr, addr) \ - ({ \ - int ret; \ - spin_lock(lock); \ - ret = ext2_clear_bit((nr), (addr)); \ - spin_unlock(lock); \ - ret; \ - }) - -static __inline__ int ext2_test_bit(int nr, const volatile void * addr) -{ - char retval; - -#ifdef CONFIG_COLDFIRE - __asm__ __volatile__ ("lea %1,%%a0; btst %2,(%%a0); sne %0" - : "=d" (retval) - : "m" (((const volatile char *)addr)[nr >> 3]), "d" (nr) - : "%a0"); -#else - __asm__ __volatile__ ("btst %2,%1; sne %0" - : "=d" (retval) - : "m" (((const volatile char *)addr)[nr >> 3]), "di" (nr) - /* No clobber */); -#endif - - return retval; -} - -#define ext2_find_first_zero_bit(addr, size) \ - ext2_find_next_zero_bit((addr), (size), 0) - -static __inline__ unsigned long ext2_find_next_zero_bit(void *addr, unsigned long size, unsigned long offset) -{ - unsigned long *p = ((unsigned long *) addr) + (offset >> 5); - unsigned long result = offset & ~31UL; - unsigned long tmp; - - if (offset >= size) - return size; - size -= result; - offset &= 31UL; - if(offset) { - /* We hold the little endian value in tmp, but then the - * shift is illegal. So we could keep a big endian value - * in tmp, like this: - * - * tmp = __swab32(*(p++)); - * tmp |= ~0UL >> (32-offset); - * - * but this would decrease performance, so we change the - * shift: - */ - tmp = *(p++); - tmp |= __swab32(~0UL >> (32-offset)); - if(size < 32) - goto found_first; - if(~tmp) - goto found_middle; - size -= 32; - result += 32; - } - while(size & ~31UL) { - if(~(tmp = *(p++))) - goto found_middle; - result += 32; - size -= 32; - } - if(!size) - return result; - tmp = *p; - -found_first: - /* tmp is little endian, so we would have to swab the shift, - * see above. But then we have to swab tmp below for ffz, so - * we might as well do this here. - */ - return result + ffz(__swab32(tmp) | (~0UL << size)); -found_middle: - return result + ffz(__swab32(tmp)); -} - -#define ext2_find_next_bit(addr, size, off) \ - generic_find_next_le_bit((unsigned long *)(addr), (size), (off)) -#include <asm-generic/bitops/minix.h> - -#endif /* __KERNEL__ */ - -#include <asm-generic/bitops/fls.h> -#include <asm-generic/bitops/__fls.h> -#include <asm-generic/bitops/fls64.h> - -#endif /* _M68KNOMMU_BITOPS_H */ diff --git a/arch/m68knommu/include/asm/bootinfo.h b/arch/m68knommu/include/asm/bootinfo.h deleted file mode 100644 index c12e526f518..00000000000 --- a/arch/m68knommu/include/asm/bootinfo.h +++ /dev/null @@ -1,2 +0,0 @@ - -/* Nothing for m68knommu */ diff --git a/arch/m68knommu/include/asm/bootstd.h b/arch/m68knommu/include/asm/bootstd.h deleted file mode 100644 index bdc1a4ac4fe..00000000000 --- a/arch/m68knommu/include/asm/bootstd.h +++ /dev/null @@ -1,132 +0,0 @@ -/* bootstd.h: Bootloader system call interface - * - * (c) 1999, Rt-Control, Inc. - */ - -#ifndef __BOOTSTD_H__ -#define __BOOTSTD_H__ - -#define NR_BSC 21 /* last used bootloader system call */ - -#define __BN_reset 0 /* reset and start the bootloader */ -#define __BN_test 1 /* tests the system call interface */ -#define __BN_exec 2 /* executes a bootloader image */ -#define __BN_exit 3 /* terminates a bootloader image */ -#define __BN_program 4 /* program FLASH from a chain */ -#define __BN_erase 5 /* erase sector(s) of FLASH */ -#define __BN_open 6 -#define __BN_write 7 -#define __BN_read 8 -#define __BN_close 9 -#define __BN_mmap 10 /* map a file descriptor into memory */ -#define __BN_munmap 11 /* remove a file to memory mapping */ -#define __BN_gethwaddr 12 /* get the hardware address of my interfaces */ -#define __BN_getserialnum 13 /* get the serial number of this board */ -#define __BN_getbenv 14 /* get a bootloader envvar */ -#define __BN_setbenv 15 /* get a bootloader envvar */ -#define __BN_setpmask 16 /* set the protection mask */ -#define __BN_readenv 17 /* read environment variables */ -#define __BN_flash_chattr_range 18 -#define __BN_flash_erase_range 19 -#define __BN_flash_write_range 20 - -/* Calling conventions compatible to (uC)linux/68k - * We use simmilar macros to call into the bootloader as for uClinux - */ - -#define __bsc_return(type, res) \ -do { \ - if ((unsigned long)(res) >= (unsigned long)(-64)) { \ - /* let errno be a function, preserve res in %d0 */ \ - int __err = -(res); \ - errno = __err; \ - res = -1; \ - } \ - return (type)(res); \ -} while (0) - -#define _bsc0(type,name) \ -type name(void) \ -{ \ - register long __res __asm__ ("%d0") = __BN_##name; \ - __asm__ __volatile__ ("trap #2" \ - : "=g" (__res) \ - : "0" (__res) \ - ); \ - __bsc_return(type,__res); \ -} - -#define _bsc1(type,name,atype,a) \ -type name(atype a) \ -{ \ - register long __res __asm__ ("%d0") = __BN_##name; \ - register long __a __asm__ ("%d1") = (long)a; \ - __asm__ __volatile__ ("trap #2" \ - : "=g" (__res) \ - : "0" (__res), "d" (__a) \ - ); \ - __bsc_return(type,__res); \ -} - -#define _bsc2(type,name,atype,a,btype,b) \ -type name(atype a, btype b) \ -{ \ - register long __res __asm__ ("%d0") = __BN_##name; \ - register long __a __asm__ ("%d1") = (long)a; \ - register long __b __asm__ ("%d2") = (long)b; \ - __asm__ __volatile__ ("trap #2" \ - : "=g" (__res) \ - : "0" (__res), "d" (__a), "d" (__b) \ - ); \ - __bsc_return(type,__res); \ -} - -#define _bsc3(type,name,atype,a,btype,b,ctype,c) \ -type name(atype a, btype b, ctype c) \ -{ \ - register long __res __asm__ ("%d0") = __BN_##name; \ - register long __a __asm__ ("%d1") = (long)a; \ - register long __b __asm__ ("%d2") = (long)b; \ - register long __c __asm__ ("%d3") = (long)c; \ - __asm__ __volatile__ ("trap #2" \ - : "=g" (__res) \ - : "0" (__res), "d" (__a), "d" (__b), \ - "d" (__c) \ - ); \ - __bsc_return(type,__res); \ -} - -#define _bsc4(type,name,atype,a,btype,b,ctype,c,dtype,d) \ -type name(atype a, btype b, ctype c, dtype d) \ -{ \ - register long __res __asm__ ("%d0") = __BN_##name; \ - register long __a __asm__ ("%d1") = (long)a; \ - register long __b __asm__ ("%d2") = (long)b; \ - register long __c __asm__ ("%d3") = (long)c; \ - register long __d __asm__ ("%d4") = (long)d; \ - __asm__ __volatile__ ("trap #2" \ - : "=g" (__res) \ - : "0" (__res), "d" (__a), "d" (__b), \ - "d" (__c), "d" (__d) \ - ); \ - __bsc_return(type,__res); \ -} - -#define _bsc5(type,name,atype,a,btype,b,ctype,c,dtype,d,etype,e) \ -type name(atype a, btype b, ctype c, dtype d, etype e) \ -{ \ - register long __res __asm__ ("%d0") = __BN_##name; \ - register long __a __asm__ ("%d1") = (long)a; \ - register long __b __asm__ ("%d2") = (long)b; \ - register long __c __asm__ ("%d3") = (long)c; \ - register long __d __asm__ ("%d4") = (long)d; \ - register long __e __asm__ ("%d5") = (long)e; \ - __asm__ __volatile__ ("trap #2" \ - : "=g" (__res) \ - : "0" (__res), "d" (__a), "d" (__b), \ - "d" (__c), "d" (__d), "d" (__e) \ - ); \ - __bsc_return(type,__res); \ -} - -#endif /* __BOOTSTD_H__ */ diff --git a/arch/m68knommu/include/asm/bug.h b/arch/m68knommu/include/asm/bug.h deleted file mode 100644 index 70e7dc0af21..00000000000 --- a/arch/m68knommu/include/asm/bug.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef _M68KNOMMU_BUG_H -#define _M68KNOMMU_BUG_H -#include <asm-generic/bug.h> -#endif diff --git a/arch/m68knommu/include/asm/bugs.h b/arch/m68knommu/include/asm/bugs.h deleted file mode 100644 index 5f382dac3a6..00000000000 --- a/arch/m68knommu/include/asm/bugs.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-m68k/bugs.h - * - * Copyright (C) 1994 Linus Torvalds - */ - -/* - * This is included by init/main.c to check for architecture-dependent bugs. - * - * Needs: - * void check_bugs(void); - */ - -static void check_bugs(void) -{ -} diff --git a/arch/m68knommu/include/asm/byteorder.h b/arch/m68knommu/include/asm/byteorder.h deleted file mode 100644 index a6f0b8f7f62..00000000000 --- a/arch/m68knommu/include/asm/byteorder.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef _M68KNOMMU_BYTEORDER_H -#define _M68KNOMMU_BYTEORDER_H - -#include <asm/swab.h> -#include <linux/byteorder/big_endian.h> - -#endif /* _M68KNOMMU_BYTEORDER_H */ diff --git a/arch/m68knommu/include/asm/cache.h b/arch/m68knommu/include/asm/cache.h deleted file mode 100644 index 24e9eace5f8..00000000000 --- a/arch/m68knommu/include/asm/cache.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef __ARCH_M68KNOMMU_CACHE_H -#define __ARCH_M68KNOMMU_CACHE_H - -/* bytes per L1 cache line */ -#define L1_CACHE_BYTES 16 /* this need to be at least 1 */ - -/* m68k-elf-gcc 2.95.2 doesn't like these */ - -#define __cacheline_aligned -#define ____cacheline_aligned - -#endif diff --git a/arch/m68knommu/include/asm/cachectl.h b/arch/m68knommu/include/asm/cachectl.h deleted file mode 100644 index bcf5a6a9dd5..00000000000 --- a/arch/m68knommu/include/asm/cachectl.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/cachectl.h> diff --git a/arch/m68knommu/include/asm/cacheflush.h b/arch/m68knommu/include/asm/cacheflush.h deleted file mode 100644 index 87e5dc0413b..00000000000 --- a/arch/m68knommu/include/asm/cacheflush.h +++ /dev/null @@ -1,84 +0,0 @@ -#ifndef _M68KNOMMU_CACHEFLUSH_H -#define _M68KNOMMU_CACHEFLUSH_H - -/* - * (C) Copyright 2000-2004, Greg Ungerer <gerg@snapgear.com> - */ -#include <linux/mm.h> - -#define flush_cache_all() __flush_cache_all() -#define flush_cache_mm(mm) do { } while (0) -#define flush_cache_dup_mm(mm) do { } while (0) -#define flush_cache_range(vma, start, end) __flush_cache_all() -#define flush_cache_page(vma, vmaddr) do { } while (0) -#define flush_dcache_range(start,len) __flush_cache_all() -#define flush_dcache_page(page) do { } while (0) -#define flush_dcache_mmap_lock(mapping) do { } while (0) -#define flush_dcache_mmap_unlock(mapping) do { } while (0) -#define flush_icache_range(start,len) __flush_cache_all() -#define flush_icache_page(vma,pg) do { } while (0) -#define flush_icache_user_range(vma,pg,adr,len) do { } while (0) -#define flush_cache_vmap(start, end) do { } while (0) -#define flush_cache_vunmap(start, end) do { } while (0) - -#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ - memcpy(dst, src, len) -#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ - memcpy(dst, src, len) - -static inline void __flush_cache_all(void) -{ -#ifdef CONFIG_M5407 - /* - * Use cpushl to push and invalidate all cache lines. - * Gas doesn't seem to know how to generate the ColdFire - * cpushl instruction... Oh well, bit stuff it for now. - */ - __asm__ __volatile__ ( - "nop\n\t" - "clrl %%d0\n\t" - "1:\n\t" - "movel %%d0,%%a0\n\t" - "2:\n\t" - ".word 0xf468\n\t" - "addl #0x10,%%a0\n\t" - "cmpl #0x00000800,%%a0\n\t" - "blt 2b\n\t" - "addql #1,%%d0\n\t" - "cmpil #4,%%d0\n\t" - "bne 1b\n\t" - "movel #0xb6088500,%%d0\n\t" - "movec %%d0,%%CACR\n\t" - : : : "d0", "a0" ); -#endif /* CONFIG_M5407 */ -#if defined(CONFIG_M527x) || defined(CONFIG_M528x) - __asm__ __volatile__ ( - "movel #0x81000200, %%d0\n\t" - "movec %%d0, %%CACR\n\t" - "nop\n\t" - : : : "d0" ); -#endif /* CONFIG_M527x || CONFIG_M528x */ -#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || defined(CONFIG_M5272) - __asm__ __volatile__ ( - "movel #0x81000100, %%d0\n\t" - "movec %%d0, %%CACR\n\t" - "nop\n\t" - : : : "d0" ); -#endif /* CONFIG_M5206 || CONFIG_M5206e || CONFIG_M5272 */ -#ifdef CONFIG_M5249 - __asm__ __volatile__ ( - "movel #0xa1000200, %%d0\n\t" - "movec %%d0, %%CACR\n\t" - "nop\n\t" - : : : "d0" ); -#endif /* CONFIG_M5249 */ -#ifdef CONFIG_M532x - __asm__ __volatile__ ( - "movel #0x81000200, %%d0\n\t" - "movec %%d0, %%CACR\n\t" - "nop\n\t" - : : : "d0" ); -#endif /* CONFIG_M532x */ -} - -#endif /* _M68KNOMMU_CACHEFLUSH_H */ diff --git a/arch/m68knommu/include/asm/checksum.h b/arch/m68knommu/include/asm/checksum.h deleted file mode 100644 index 81883482ffb..00000000000 --- a/arch/m68knommu/include/asm/checksum.h +++ /dev/null @@ -1,132 +0,0 @@ -#ifndef _M68K_CHECKSUM_H -#define _M68K_CHECKSUM_H - -#include <linux/in6.h> - -/* - * computes the checksum of a memory block at buff, length len, - * and adds in "sum" (32-bit) - * - * returns a 32-bit number suitable for feeding into itself - * or csum_tcpudp_magic - * - * this function must be called with even lengths, except - * for the last fragment, which may be odd - * - * it's best to have buff aligned on a 32-bit boundary - */ -__wsum csum_partial(const void *buff, int len, __wsum sum); - -/* - * the same as csum_partial, but copies from src while it - * checksums - * - * here even more important to align src and dst on a 32-bit (or even - * better 64-bit) boundary - */ - -__wsum csum_partial_copy_nocheck(const void *src, void *dst, - int len, __wsum sum); - - -/* - * the same as csum_partial_copy, but copies from user space. - * - * here even more important to align src and dst on a 32-bit (or even - * better 64-bit) boundary - */ - -extern __wsum csum_partial_copy_from_user(const void __user *src, - void *dst, int len, __wsum sum, int *csum_err); - -__sum16 ip_fast_csum(const void *iph, unsigned int ihl); - -/* - * Fold a partial checksum - */ - -static inline __sum16 csum_fold(__wsum sum) -{ - unsigned int tmp = (__force u32)sum; -#ifdef CONFIG_COLDFIRE - tmp = (tmp & 0xffff) + (tmp >> 16); - tmp = (tmp & 0xffff) + (tmp >> 16); - return (__force __sum16)~tmp; -#else - __asm__("swap %1\n\t" - "addw %1, %0\n\t" - "clrw %1\n\t" - "addxw %1, %0" - : "=&d" (sum), "=&d" (tmp) - : "0" (sum), "1" (sum)); - return (__force __sum16)~sum; -#endif -} - - -/* - * computes the checksum of the TCP/UDP pseudo-header - * returns a 16-bit checksum, already complemented - */ - -static inline __wsum -csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len, - unsigned short proto, __wsum sum) -{ - __asm__ ("addl %1,%0\n\t" - "addxl %4,%0\n\t" - "addxl %5,%0\n\t" - "clrl %1\n\t" - "addxl %1,%0" - : "=&d" (sum), "=&d" (saddr) - : "0" (daddr), "1" (saddr), "d" (len + proto), - "d"(sum)); - return sum; -} - -static inline __sum16 -csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len, - unsigned short proto, __wsum sum) -{ - return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum)); -} - -/* - * this routine is used for miscellaneous IP-like checksums, mainly - * in icmp.c - */ - -extern __sum16 ip_compute_csum(const void *buff, int len); - -#define _HAVE_ARCH_IPV6_CSUM -static __inline__ __sum16 -csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr, - __u32 len, unsigned short proto, __wsum sum) -{ - register unsigned long tmp; - __asm__("addl %2@,%0\n\t" - "movel %2@(4),%1\n\t" - "addxl %1,%0\n\t" - "movel %2@(8),%1\n\t" - "addxl %1,%0\n\t" - "movel %2@(12),%1\n\t" - "addxl %1,%0\n\t" - "movel %3@,%1\n\t" - "addxl %1,%0\n\t" - "movel %3@(4),%1\n\t" - "addxl %1,%0\n\t" - "movel %3@(8),%1\n\t" - "addxl %1,%0\n\t" - "movel %3@(12),%1\n\t" - "addxl %1,%0\n\t" - "addxl %4,%0\n\t" - "clrl %1\n\t" - "addxl %1,%0" - : "=&d" (sum), "=&d" (tmp) - : "a" (saddr), "a" (daddr), "d" (len + proto), - "0" (sum)); - - return csum_fold(sum); -} - -#endif /* _M68K_CHECKSUM_H */ diff --git a/arch/m68knommu/include/asm/coldfire.h b/arch/m68knommu/include/asm/coldfire.h deleted file mode 100644 index 83a9fa4e618..00000000000 --- a/arch/m68knommu/include/asm/coldfire.h +++ /dev/null @@ -1,51 +0,0 @@ -/****************************************************************************/ - -/* - * coldfire.h -- Motorola ColdFire CPU sepecific defines - * - * (C) Copyright 1999-2006, Greg Ungerer (gerg@snapgear.com) - * (C) Copyright 2000, Lineo (www.lineo.com) - */ - -/****************************************************************************/ -#ifndef coldfire_h -#define coldfire_h -/****************************************************************************/ - - -/* - * Define master clock frequency. This is essentially done at config - * time now. No point enumerating dozens of possible clock options - * here. Also the peripheral clock (bus clock) divide ratio is set - * at config time too. - */ -#ifdef CONFIG_CLOCK_SET -#define MCF_CLK CONFIG_CLOCK_FREQ -#define MCF_BUSCLK (CONFIG_CLOCK_FREQ / CONFIG_CLOCK_DIV) -#else -#error "Don't know what your ColdFire CPU clock frequency is??" -#endif - -/* - * Define the processor support peripherals base address. - * This is generally setup by the boards start up code. - */ -#define MCF_MBAR 0x10000000 -#define MCF_MBAR2 0x80000000 -#if defined(CONFIG_M520x) -#define MCF_IPSBAR 0xFC000000 -#else -#define MCF_IPSBAR 0x40000000 -#endif - -#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \ - defined(CONFIG_M520x) -#undef MCF_MBAR -#define MCF_MBAR MCF_IPSBAR -#elif defined(CONFIG_M532x) -#undef MCF_MBAR -#define MCF_MBAR 0x00000000 -#endif - -/****************************************************************************/ -#endif /* coldfire_h */ diff --git a/arch/m68knommu/include/asm/commproc.h b/arch/m68knommu/include/asm/commproc.h deleted file mode 100644 index edf5eb6c08d..00000000000 --- a/arch/m68knommu/include/asm/commproc.h +++ /dev/null @@ -1,703 +0,0 @@ - -/* - * 68360 Communication Processor Module. - * Copyright (c) 2000 Michael Leslie <mleslie@lineo.com> (mc68360) after: - * Copyright (c) 1997 Dan Malek <dmalek@jlc.net> (mpc8xx) - * - * This file contains structures and information for the communication - * processor channels. Some CPM control and status is available - * through the 68360 internal memory map. See include/asm/360_immap.h for details. - * This file is not a complete map of all of the 360 QUICC's capabilities - * - * On the MBX board, EPPC-Bug loads CPM microcode into the first 512 - * bytes of the DP RAM and relocates the I2C parameter area to the - * IDMA1 space. The remaining DP RAM is available for buffer descriptors - * or other use. - */ -#ifndef __CPM_360__ -#define __CPM_360__ - - -/* CPM Command register masks: */ -#define CPM_CR_RST ((ushort)0x8000) -#define CPM_CR_OPCODE ((ushort)0x0f00) -#define CPM_CR_CHAN ((ushort)0x00f0) -#define CPM_CR_FLG ((ushort)0x0001) - -/* CPM Command set (opcodes): */ -#define CPM_CR_INIT_TRX ((ushort)0x0000) -#define CPM_CR_INIT_RX ((ushort)0x0001) -#define CPM_CR_INIT_TX ((ushort)0x0002) -#define CPM_CR_HUNT_MODE ((ushort)0x0003) -#define CPM_CR_STOP_TX ((ushort)0x0004) -#define CPM_CR_GRSTOP_TX ((ushort)0x0005) -#define CPM_CR_RESTART_TX ((ushort)0x0006) -#define CPM_CR_CLOSE_RXBD ((ushort)0x0007) -#define CPM_CR_SET_GADDR ((ushort)0x0008) -#define CPM_CR_GCI_TIMEOUT ((ushort)0x0009) -#define CPM_CR_GCI_ABORT ((ushort)0x000a) -#define CPM_CR_RESET_BCS ((ushort)0x000a) - -/* CPM Channel numbers. */ -#define CPM_CR_CH_SCC1 ((ushort)0x0000) -#define CPM_CR_CH_SCC2 ((ushort)0x0004) -#define CPM_CR_CH_SPI ((ushort)0x0005) /* SPI / Timers */ -#define CPM_CR_CH_TMR ((ushort)0x0005) -#define CPM_CR_CH_SCC3 ((ushort)0x0008) -#define CPM_CR_CH_SMC1 ((ushort)0x0009) /* SMC1 / IDMA1 */ -#define CPM_CR_CH_IDMA1 ((ushort)0x0009) -#define CPM_CR_CH_SCC4 ((ushort)0x000c) -#define CPM_CR_CH_SMC2 ((ushort)0x000d) /* SMC2 / IDMA2 */ -#define CPM_CR_CH_IDMA2 ((ushort)0x000d) - - -#define mk_cr_cmd(CH, CMD) ((CMD << 8) | (CH << 4)) - -#if 1 /* mleslie: I dinna think we have any such restrictions on - * DP RAM aboard the 360 board - see the MC68360UM p.3-3 */ - -/* The dual ported RAM is multi-functional. Some areas can be (and are - * being) used for microcode. There is an area that can only be used - * as data ram for buffer descriptors, which is all we use right now. - * Currently the first 512 and last 256 bytes are used for microcode. - */ -/* mleslie: The uCquicc board is using no extra microcode in DPRAM */ -#define CPM_DATAONLY_BASE ((uint)0x0000) -#define CPM_DATAONLY_SIZE ((uint)0x0800) -#define CPM_DP_NOSPACE ((uint)0x7fffffff) - -#endif - - -/* Export the base address of the communication processor registers - * and dual port ram. */ -/* extern cpm360_t *cpmp; */ /* Pointer to comm processor */ -extern QUICC *pquicc; -uint m360_cpm_dpalloc(uint size); -/* void *m360_cpm_hostalloc(uint size); */ -void m360_cpm_setbrg(uint brg, uint rate); - -#if 0 /* use QUICC_BD declared in include/asm/m68360_quicc.h */ -/* Buffer descriptors used by many of the CPM protocols. */ -typedef struct cpm_buf_desc { - ushort cbd_sc; /* Status and Control */ - ushort cbd_datlen; /* Data length in buffer */ - uint cbd_bufaddr; /* Buffer address in host memory */ -} cbd_t; -#endif - - -/* rx bd status/control bits */ -#define BD_SC_EMPTY ((ushort)0x8000) /* Recieve is empty */ -#define BD_SC_WRAP ((ushort)0x2000) /* Last buffer descriptor in table */ -#define BD_SC_INTRPT ((ushort)0x1000) /* Interrupt on change */ -#define BD_SC_LAST ((ushort)0x0800) /* Last buffer in frame OR control char */ - -#define BD_SC_FIRST ((ushort)0x0400) /* 1st buffer in an HDLC frame */ -#define BD_SC_ADDR ((ushort)0x0400) /* 1st byte is a multidrop address */ - -#define BD_SC_CM ((ushort)0x0200) /* Continous mode */ -#define BD_SC_ID ((ushort)0x0100) /* Received too many idles */ - -#define BD_SC_AM ((ushort)0x0080) /* Multidrop address match */ -#define BD_SC_DE ((ushort)0x0080) /* DPLL Error (HDLC) */ - -#define BD_SC_BR ((ushort)0x0020) /* Break received */ -#define BD_SC_LG ((ushort)0x0020) /* Frame length violation (HDLC) */ - -#define BD_SC_FR ((ushort)0x0010) /* Framing error */ -#define BD_SC_NO ((ushort)0x0010) /* Nonoctet aligned frame (HDLC) */ - -#define BD_SC_PR ((ushort)0x0008) /* Parity error */ -#define BD_SC_AB ((ushort)0x0008) /* Received abort Sequence (HDLC) */ - -#define BD_SC_OV ((ushort)0x0002) /* Overrun */ -#define BD_SC_CD ((ushort)0x0001) /* Carrier Detect lost */ - -/* tx bd status/control bits (as differ from rx bd) */ -#define BD_SC_READY ((ushort)0x8000) /* Transmit is ready */ -#define BD_SC_TC ((ushort)0x0400) /* Transmit CRC */ -#define BD_SC_P ((ushort)0x0100) /* xmt preamble */ -#define BD_SC_UN ((ushort)0x0002) /* Underrun */ - - - - -/* Parameter RAM offsets. */ - - - -/* In 2.4 ppc, the PROFF_S?C? are used as byte offsets into DPRAM. - * In 2.0, we use a more structured C struct map of DPRAM, and so - * instead, we need only a parameter ram `slot' */ - -#define PRSLOT_SCC1 0 -#define PRSLOT_SCC2 1 -#define PRSLOT_SCC3 2 -#define PRSLOT_SMC1 2 -#define PRSLOT_SCC4 3 -#define PRSLOT_SMC2 3 - - -/* #define PROFF_SCC1 ((uint)0x0000) */ -/* #define PROFF_SCC2 ((uint)0x0100) */ -/* #define PROFF_SCC3 ((uint)0x0200) */ -/* #define PROFF_SMC1 ((uint)0x0280) */ -/* #define PROFF_SCC4 ((uint)0x0300) */ -/* #define PROFF_SMC2 ((uint)0x0380) */ - - -/* Define enough so I can at least use the serial port as a UART. - * The MBX uses SMC1 as the host serial port. - */ -typedef struct smc_uart { - ushort smc_rbase; /* Rx Buffer descriptor base address */ - ushort smc_tbase; /* Tx Buffer descriptor base address */ - u_char smc_rfcr; /* Rx function code */ - u_char smc_tfcr; /* Tx function code */ - ushort smc_mrblr; /* Max receive buffer length */ - uint smc_rstate; /* Internal */ - uint smc_idp; /* Internal */ - ushort smc_rbptr; /* Internal */ - ushort smc_ibc; /* Internal */ - uint smc_rxtmp; /* Internal */ - uint smc_tstate; /* Internal */ - uint smc_tdp; /* Internal */ - ushort smc_tbptr; /* Internal */ - ushort smc_tbc; /* Internal */ - uint smc_txtmp; /* Internal */ - ushort smc_maxidl; /* Maximum idle characters */ - ushort smc_tmpidl; /* Temporary idle counter */ - ushort smc_brklen; /* Last received break length */ - ushort smc_brkec; /* rcv'd break condition counter */ - ushort smc_brkcr; /* xmt break count register */ - ushort smc_rmask; /* Temporary bit mask */ -} smc_uart_t; - -/* Function code bits. -*/ -#define SMC_EB ((u_char)0x10) /* Set big endian byte order */ - -/* SMC uart mode register. -*/ -#define SMCMR_REN ((ushort)0x0001) -#define SMCMR_TEN ((ushort)0x0002) -#define SMCMR_DM ((ushort)0x000c) -#define SMCMR_SM_GCI ((ushort)0x0000) -#define SMCMR_SM_UART ((ushort)0x0020) -#define SMCMR_SM_TRANS ((ushort)0x0030) -#define SMCMR_SM_MASK ((ushort)0x0030) -#define SMCMR_PM_EVEN ((ushort)0x0100) /* Even parity, else odd */ -#define SMCMR_REVD SMCMR_PM_EVEN -#define SMCMR_PEN ((ushort)0x0200) /* Parity enable */ -#define SMCMR_BS SMCMR_PEN -#define SMCMR_SL ((ushort)0x0400) /* Two stops, else one */ -#define SMCR_CLEN_MASK ((ushort)0x7800) /* Character length */ -#define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK) - -/* SMC2 as Centronics parallel printer. It is half duplex, in that - * it can only receive or transmit. The parameter ram values for - * each direction are either unique or properly overlap, so we can - * include them in one structure. - */ -typedef struct smc_centronics { - ushort scent_rbase; - ushort scent_tbase; - u_char scent_cfcr; - u_char scent_smask; - ushort scent_mrblr; - uint scent_rstate; - uint scent_r_ptr; - ushort scent_rbptr; - ushort scent_r_cnt; - uint scent_rtemp; - uint scent_tstate; - uint scent_t_ptr; - ushort scent_tbptr; - ushort scent_t_cnt; - uint scent_ttemp; - ushort scent_max_sl; - ushort scent_sl_cnt; - ushort scent_character1; - ushort scent_character2; - ushort scent_character3; - ushort scent_character4; - ushort scent_character5; - ushort scent_character6; - ushort scent_character7; - ushort scent_character8; - ushort scent_rccm; - ushort scent_rccr; -} smc_cent_t; - -/* Centronics Status Mask Register. -*/ -#define SMC_CENT_F ((u_char)0x08) -#define SMC_CENT_PE ((u_char)0x04) -#define SMC_CENT_S ((u_char)0x02) - -/* SMC Event and Mask register. -*/ -#define SMCM_BRKE ((unsigned char)0x40) /* When in UART Mode */ -#define SMCM_BRK ((unsigned char)0x10) /* When in UART Mode */ -#define SMCM_TXE ((unsigned char)0x10) /* When in Transparent Mode */ -#define SMCM_BSY ((unsigned char)0x04) -#define SMCM_TX ((unsigned char)0x02) -#define SMCM_RX ((unsigned char)0x01) - -/* Baud rate generators. -*/ -#define CPM_BRG_RST ((uint)0x00020000) -#define CPM_BRG_EN ((uint)0x00010000) -#define CPM_BRG_EXTC_INT ((uint)0x00000000) -#define CPM_BRG_EXTC_CLK2 ((uint)0x00004000) -#define CPM_BRG_EXTC_CLK6 ((uint)0x00008000) -#define CPM_BRG_ATB ((uint)0x00002000) -#define CPM_BRG_CD_MASK ((uint)0x00001ffe) -#define CPM_BRG_DIV16 ((uint)0x00000001) - -/* SCCs. -*/ -#define SCC_GSMRH_IRP ((uint)0x00040000) -#define SCC_GSMRH_GDE ((uint)0x00010000) -#define SCC_GSMRH_TCRC_CCITT ((uint)0x00008000) -#define SCC_GSMRH_TCRC_BISYNC ((uint)0x00004000) -#define SCC_GSMRH_TCRC_HDLC ((uint)0x00000000) -#define SCC_GSMRH_REVD ((uint)0x00002000) -#define SCC_GSMRH_TRX ((uint)0x00001000) -#define SCC_GSMRH_TTX ((uint)0x00000800) -#define SCC_GSMRH_CDP ((uint)0x00000400) -#define SCC_GSMRH_CTSP ((uint)0x00000200) -#define SCC_GSMRH_CDS ((uint)0x00000100) -#define SCC_GSMRH_CTSS ((uint)0x00000080) -#define SCC_GSMRH_TFL ((uint)0x00000040) -#define SCC_GSMRH_RFW ((uint)0x00000020) -#define SCC_GSMRH_TXSY ((uint)0x00000010) -#define SCC_GSMRH_SYNL16 ((uint)0x0000000c) -#define SCC_GSMRH_SYNL8 ((uint)0x00000008) -#define SCC_GSMRH_SYNL4 ((uint)0x00000004) -#define SCC_GSMRH_RTSM ((uint)0x00000002) -#define SCC_GSMRH_RSYN ((uint)0x00000001) - -#define SCC_GSMRL_SIR ((uint)0x80000000) /* SCC2 only */ -#define SCC_GSMRL_EDGE_NONE ((uint)0x60000000) -#define SCC_GSMRL_EDGE_NEG ((uint)0x40000000) -#define SCC_GSMRL_EDGE_POS ((uint)0x20000000) -#define SCC_GSMRL_EDGE_BOTH ((uint)0x00000000) -#define SCC_GSMRL_TCI ((uint)0x10000000) -#define SCC_GSMRL_TSNC_3 ((uint)0x0c000000) -#define SCC_GSMRL_TSNC_4 ((uint)0x08000000) -#define SCC_GSMRL_TSNC_14 ((uint)0x04000000) -#define SCC_GSMRL_TSNC_INF ((uint)0x00000000) -#define SCC_GSMRL_RINV ((uint)0x02000000) -#define SCC_GSMRL_TINV ((uint)0x01000000) -#define SCC_GSMRL_TPL_128 ((uint)0x00c00000) -#define SCC_GSMRL_TPL_64 ((uint)0x00a00000) -#define SCC_GSMRL_TPL_48 ((uint)0x00800000) -#define SCC_GSMRL_TPL_32 ((uint)0x00600000) -#define SCC_GSMRL_TPL_16 ((uint)0x00400000) -#define SCC_GSMRL_TPL_8 ((uint)0x00200000) -#define SCC_GSMRL_TPL_NONE ((uint)0x00000000) -#define SCC_GSMRL_TPP_ALL1 ((uint)0x00180000) -#define SCC_GSMRL_TPP_01 ((uint)0x00100000) -#define SCC_GSMRL_TPP_10 ((uint)0x00080000) -#define SCC_GSMRL_TPP_ZEROS ((uint)0x00000000) -#define SCC_GSMRL_TEND ((uint)0x00040000) -#define SCC_GSMRL_TDCR_32 ((uint)0x00030000) -#define SCC_GSMRL_TDCR_16 ((uint)0x00020000) -#define SCC_GSMRL_TDCR_8 ((uint)0x00010000) -#define SCC_GSMRL_TDCR_1 ((uint)0x00000000) -#define SCC_GSMRL_RDCR_32 ((uint)0x0000c000) -#define SCC_GSMRL_RDCR_16 ((uint)0x00008000) -#define SCC_GSMRL_RDCR_8 ((uint)0x00004000) -#define SCC_GSMRL_RDCR_1 ((uint)0x00000000) -#define SCC_GSMRL_RENC_DFMAN ((uint)0x00003000) -#define SCC_GSMRL_RENC_MANCH ((uint)0x00002000) -#define SCC_GSMRL_RENC_FM0 ((uint)0x00001000) -#define SCC_GSMRL_RENC_NRZI ((uint)0x00000800) -#define SCC_GSMRL_RENC_NRZ ((uint)0x00000000) -#define SCC_GSMRL_TENC_DFMAN ((uint)0x00000600) -#define SCC_GSMRL_TENC_MANCH ((uint)0x00000400) -#define SCC_GSMRL_TENC_FM0 ((uint)0x00000200) -#define SCC_GSMRL_TENC_NRZI ((uint)0x00000100) -#define SCC_GSMRL_TENC_NRZ ((uint)0x00000000) -#define SCC_GSMRL_DIAG_LE ((uint)0x000000c0) /* Loop and echo */ -#define SCC_GSMRL_DIAG_ECHO ((uint)0x00000080) -#define SCC_GSMRL_DIAG_LOOP ((uint)0x00000040) -#define SCC_GSMRL_DIAG_NORM ((uint)0x00000000) -#define SCC_GSMRL_ENR ((uint)0x00000020) -#define SCC_GSMRL_ENT ((uint)0x00000010) -#define SCC_GSMRL_MODE_ENET ((uint)0x0000000c) -#define SCC_GSMRL_MODE_DDCMP ((uint)0x00000009) -#define SCC_GSMRL_MODE_BISYNC ((uint)0x00000008) -#define SCC_GSMRL_MODE_V14 ((uint)0x00000007) -#define SCC_GSMRL_MODE_AHDLC ((uint)0x00000006) -#define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005) -#define SCC_GSMRL_MODE_UART ((uint)0x00000004) -#define SCC_GSMRL_MODE_SS7 ((uint)0x00000003) -#define SCC_GSMRL_MODE_ATALK ((uint)0x00000002) -#define SCC_GSMRL_MODE_HDLC ((uint)0x00000000) - -#define SCC_TODR_TOD ((ushort)0x8000) - -/* SCC Event and Mask register. -*/ -#define SCCM_TXE ((unsigned char)0x10) -#define SCCM_BSY ((unsigned char)0x04) -#define SCCM_TX ((unsigned char)0x02) -#define SCCM_RX ((unsigned char)0x01) - -typedef struct scc_param { - ushort scc_rbase; /* Rx Buffer descriptor base address */ - ushort scc_tbase; /* Tx Buffer descriptor base address */ - u_char scc_rfcr; /* Rx function code */ - u_char scc_tfcr; /* Tx function code */ - ushort scc_mrblr; /* Max receive buffer length */ - uint scc_rstate; /* Internal */ - uint scc_idp; /* Internal */ - ushort scc_rbptr; /* Internal */ - ushort scc_ibc; /* Internal */ - uint scc_rxtmp; /* Internal */ - uint scc_tstate; /* Internal */ - uint scc_tdp; /* Internal */ - ushort scc_tbptr; /* Internal */ - ushort scc_tbc; /* Internal */ - uint scc_txtmp; /* Internal */ - uint scc_rcrc; /* Internal */ - uint scc_tcrc; /* Internal */ -} sccp_t; - - -/* Function code bits. - */ -#define SCC_EB ((u_char)0x10) /* Set big endian byte order */ -#define SCC_FC_DMA ((u_char)0x08) /* Set SDMA */ - -/* CPM Ethernet through SCC1. - */ -typedef struct scc_enet { - sccp_t sen_genscc; - uint sen_cpres; /* Preset CRC */ - uint sen_cmask; /* Constant mask for CRC */ - uint sen_crcec; /* CRC Error counter */ - uint sen_alec; /* alignment error counter */ - uint sen_disfc; /* discard frame counter */ - ushort sen_pads; /* Tx short frame pad character */ - ushort sen_retlim; /* Retry limit threshold */ - ushort sen_retcnt; /* Retry limit counter */ - ushort sen_maxflr; /* maximum frame length register */ - ushort sen_minflr; /* minimum frame length register */ - ushort sen_maxd1; /* maximum DMA1 length */ - ushort sen_maxd2; /* maximum DMA2 length */ - ushort sen_maxd; /* Rx max DMA */ - ushort sen_dmacnt; /* Rx DMA counter */ - ushort sen_maxb; /* Max BD byte count */ - ushort sen_gaddr1; /* Group address filter */ - ushort sen_gaddr2; - ushort sen_gaddr3; - ushort sen_gaddr4; - uint sen_tbuf0data0; /* Save area 0 - current frame */ - uint sen_tbuf0data1; /* Save area 1 - current frame */ - uint sen_tbuf0rba; /* Internal */ - uint sen_tbuf0crc; /* Internal */ - ushort sen_tbuf0bcnt; /* Internal */ - ushort sen_paddrh; /* physical address (MSB) */ - ushort sen_paddrm; - ushort sen_paddrl; /* physical address (LSB) */ - ushort sen_pper; /* persistence */ - ushort sen_rfbdptr; /* Rx first BD pointer */ - ushort sen_tfbdptr; /* Tx first BD pointer */ - ushort sen_tlbdptr; /* Tx last BD pointer */ - uint sen_tbuf1data0; /* Save area 0 - current frame */ - uint sen_tbuf1data1; /* Save area 1 - current frame */ - uint sen_tbuf1rba; /* Internal */ - uint sen_tbuf1crc; /* Internal */ - ushort sen_tbuf1bcnt; /* Internal */ - ushort sen_txlen; /* Tx Frame length counter */ - ushort sen_iaddr1; /* Individual address filter */ - ushort sen_iaddr2; - ushort sen_iaddr3; - ushort sen_iaddr4; - ushort sen_boffcnt; /* Backoff counter */ - - /* NOTE: Some versions of the manual have the following items - * incorrectly documented. Below is the proper order. - */ - ushort sen_taddrh; /* temp address (MSB) */ - ushort sen_taddrm; - ushort sen_taddrl; /* temp address (LSB) */ -} scc_enet_t; - - - -#if defined (CONFIG_UCQUICC) -/* uCquicc has the following signals connected to Ethernet: - * 68360 - lxt905 - * PA0/RXD1 - rxd - * PA1/TXD1 - txd - * PA8/CLK1 - tclk - * PA9/CLK2 - rclk - * PC0/!RTS1 - t_en - * PC1/!CTS1 - col - * PC5/!CD1 - cd - */ -#define PA_ENET_RXD PA_RXD1 -#define PA_ENET_TXD PA_TXD1 -#define PA_ENET_TCLK PA_CLK1 -#define PA_ENET_RCLK PA_CLK2 -#define PC_ENET_TENA PC_RTS1 -#define PC_ENET_CLSN PC_CTS1 -#define PC_ENET_RENA PC_CD1 - -/* Control bits in the SICR to route TCLK (CLK1) and RCLK (CLK2) to - * SCC1. - */ -#define SICR_ENET_MASK ((uint)0x000000ff) -#define SICR_ENET_CLKRT ((uint)0x0000002c) - -#endif /* config_ucquicc */ - - -#ifdef MBX -/* Bits in parallel I/O port registers that have to be set/cleared - * to configure the pins for SCC1 use. The TCLK and RCLK seem unique - * to the MBX860 board. Any two of the four available clocks could be - * used, and the MPC860 cookbook manual has an example using different - * clock pins. - */ -#define PA_ENET_RXD ((ushort)0x0001) -#define PA_ENET_TXD ((ushort)0x0002) -#define PA_ENET_TCLK ((ushort)0x0200) -#define PA_ENET_RCLK ((ushort)0x0800) -#define PC_ENET_TENA ((ushort)0x0001) -#define PC_ENET_CLSN ((ushort)0x0010) -#define PC_ENET_RENA ((ushort)0x0020) - -/* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK4) to - * SCC1. Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero. - */ -#define SICR_ENET_MASK ((uint)0x000000ff) -#define SICR_ENET_CLKRT ((uint)0x0000003d) -#endif - -#ifdef CONFIG_RPXLITE -/* This ENET stuff is for the MPC850 with ethernet on SCC2. Some of - * this may be unique to the RPX-Lite configuration. - * Note TENA is on Port B. - */ -#define PA_ENET_RXD ((ushort)0x0004) -#define PA_ENET_TXD ((ushort)0x0008) -#define PA_ENET_TCLK ((ushort)0x0200) -#define PA_ENET_RCLK ((ushort)0x0800) -#define PB_ENET_TENA ((uint)0x00002000) -#define PC_ENET_CLSN ((ushort)0x0040) -#define PC_ENET_RENA ((ushort)0x0080) - -#define SICR_ENET_MASK ((uint)0x0000ff00) -#define SICR_ENET_CLKRT ((uint)0x00003d00) -#endif - -#ifdef CONFIG_BSEIP -/* This ENET stuff is for the MPC823 with ethernet on SCC2. - * This is unique to the BSE ip-Engine board. - */ -#define PA_ENET_RXD ((ushort)0x0004) -#define PA_ENET_TXD ((ushort)0x0008) -#define PA_ENET_TCLK ((ushort)0x0100) -#define PA_ENET_RCLK ((ushort)0x0200) -#define PB_ENET_TENA ((uint)0x00002000) -#define PC_ENET_CLSN ((ushort)0x0040) -#define PC_ENET_RENA ((ushort)0x0080) - -/* BSE uses port B and C bits for PHY control also. -*/ -#define PB_BSE_POWERUP ((uint)0x00000004) -#define PB_BSE_FDXDIS ((uint)0x00008000) -#define PC_BSE_LOOPBACK ((ushort)0x0800) - -#define SICR_ENET_MASK ((uint)0x0000ff00) -#define SICR_ENET_CLKRT ((uint)0x00002c00) -#endif - -/* SCC Event register as used by Ethernet. -*/ -#define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */ -#define SCCE_ENET_TXE ((ushort)0x0010) /* Transmit Error */ -#define SCCE_ENET_RXF ((ushort)0x0008) /* Full frame received */ -#define SCCE_ENET_BSY ((ushort)0x0004) /* All incoming buffers full */ -#define SCCE_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */ -#define SCCE_ENET_RXB ((ushort)0x0001) /* A buffer was received */ - -/* SCC Mode Register (PMSR) as used by Ethernet. -*/ -#define SCC_PMSR_HBC ((ushort)0x8000) /* Enable heartbeat */ -#define SCC_PMSR_FC ((ushort)0x4000) /* Force collision */ -#define SCC_PMSR_RSH ((ushort)0x2000) /* Receive short frames */ -#define SCC_PMSR_IAM ((ushort)0x1000) /* Check individual hash */ -#define SCC_PMSR_ENCRC ((ushort)0x0800) /* Ethernet CRC mode */ -#define SCC_PMSR_PRO ((ushort)0x0200) /* Promiscuous mode */ -#define SCC_PMSR_BRO ((ushort)0x0100) /* Catch broadcast pkts */ -#define SCC_PMSR_SBT ((ushort)0x0080) /* Special backoff timer */ -#define SCC_PMSR_LPB ((ushort)0x0040) /* Set Loopback mode */ -#define SCC_PMSR_SIP ((ushort)0x0020) /* Sample Input Pins */ -#define SCC_PMSR_LCW ((ushort)0x0010) /* Late collision window */ -#define SCC_PMSR_NIB22 ((ushort)0x000a) /* Start frame search */ -#define SCC_PMSR_FDE ((ushort)0x0001) /* Full duplex enable */ - -/* Buffer descriptor control/status used by Ethernet receive. -*/ -#define BD_ENET_RX_EMPTY ((ushort)0x8000) -#define BD_ENET_RX_WRAP ((ushort)0x2000) -#define BD_ENET_RX_INTR ((ushort)0x1000) -#define BD_ENET_RX_LAST ((ushort)0x0800) -#define BD_ENET_RX_FIRST ((ushort)0x0400) -#define BD_ENET_RX_MISS ((ushort)0x0100) -#define BD_ENET_RX_LG ((ushort)0x0020) -#define BD_ENET_RX_NO ((ushort)0x0010) -#define BD_ENET_RX_SH ((ushort)0x0008) -#define BD_ENET_RX_CR ((ushort)0x0004) -#define BD_ENET_RX_OV ((ushort)0x0002) -#define BD_ENET_RX_CL ((ushort)0x0001) -#define BD_ENET_RX_STATS ((ushort)0x013f) /* All status bits */ - -/* Buffer descriptor control/status used by Ethernet transmit. -*/ -#define BD_ENET_TX_READY ((ushort)0x8000) -#define BD_ENET_TX_PAD ((ushort)0x4000) -#define BD_ENET_TX_WRAP ((ushort)0x2000) -#define BD_ENET_TX_INTR ((ushort)0x1000) -#define BD_ENET_TX_LAST ((ushort)0x0800) -#define BD_ENET_TX_TC ((ushort)0x0400) -#define BD_ENET_TX_DEF ((ushort)0x0200) -#define BD_ENET_TX_HB ((ushort)0x0100) -#define BD_ENET_TX_LC ((ushort)0x0080) -#define BD_ENET_TX_RL ((ushort)0x0040) -#define BD_ENET_TX_RCMASK ((ushort)0x003c) -#define BD_ENET_TX_UN ((ushort)0x0002) -#define BD_ENET_TX_CSL ((ushort)0x0001) -#define BD_ENET_TX_STATS ((ushort)0x03ff) /* All status bits */ - -/* SCC as UART -*/ -typedef struct scc_uart { - sccp_t scc_genscc; - uint scc_res1; /* Reserved */ - uint scc_res2; /* Reserved */ - ushort scc_maxidl; /* Maximum idle chars */ - ushort scc_idlc; /* temp idle counter */ - ushort scc_brkcr; /* Break count register */ - ushort scc_parec; /* receive parity error counter */ - ushort scc_frmec; /* receive framing error counter */ - ushort scc_nosec; /* receive noise counter */ - ushort scc_brkec; /* receive break condition counter */ - ushort scc_brkln; /* last received break length */ - ushort scc_uaddr1; /* UART address character 1 */ - ushort scc_uaddr2; /* UART address character 2 */ - ushort scc_rtemp; /* Temp storage */ - ushort scc_toseq; /* Transmit out of sequence char */ - ushort scc_char1; /* control character 1 */ - ushort scc_char2; /* control character 2 */ - ushort scc_char3; /* control character 3 */ - ushort scc_char4; /* control character 4 */ - ushort scc_char5; /* control character 5 */ - ushort scc_char6; /* control character 6 */ - ushort scc_char7; /* control character 7 */ - ushort scc_char8; /* control character 8 */ - ushort scc_rccm; /* receive control character mask */ - ushort scc_rccr; /* receive control character register */ - ushort scc_rlbc; /* receive last break character */ -} scc_uart_t; - -/* SCC Event and Mask registers when it is used as a UART. -*/ -#define UART_SCCM_GLR ((ushort)0x1000) -#define UART_SCCM_GLT ((ushort)0x0800) -#define UART_SCCM_AB ((ushort)0x0200) -#define UART_SCCM_IDL ((ushort)0x0100) -#define UART_SCCM_GRA ((ushort)0x0080) -#define UART_SCCM_BRKE ((ushort)0x0040) -#define UART_SCCM_BRKS ((ushort)0x0020) -#define UART_SCCM_CCR ((ushort)0x0008) -#define UART_SCCM_BSY ((ushort)0x0004) -#define UART_SCCM_TX ((ushort)0x0002) -#define UART_SCCM_RX ((ushort)0x0001) - -/* The SCC PMSR when used as a UART. -*/ -#define SCU_PMSR_FLC ((ushort)0x8000) -#define SCU_PMSR_SL ((ushort)0x4000) -#define SCU_PMSR_CL ((ushort)0x3000) -#define SCU_PMSR_UM ((ushort)0x0c00) -#define SCU_PMSR_FRZ ((ushort)0x0200) -#define SCU_PMSR_RZS ((ushort)0x0100) -#define SCU_PMSR_SYN ((ushort)0x0080) -#define SCU_PMSR_DRT ((ushort)0x0040) -#define SCU_PMSR_PEN ((ushort)0x0010) -#define SCU_PMSR_RPM ((ushort)0x000c) -#define SCU_PMSR_REVP ((ushort)0x0008) -#define SCU_PMSR_TPM ((ushort)0x0003) -#define SCU_PMSR_TEVP ((ushort)0x0003) - -/* CPM Transparent mode SCC. - */ -typedef struct scc_trans { - sccp_t st_genscc; - uint st_cpres; /* Preset CRC */ - uint st_cmask; /* Constant mask for CRC */ -} scc_trans_t; - -#define BD_SCC_TX_LAST ((ushort)0x0800) - - - -/* CPM interrupts. There are nearly 32 interrupts generated by CPM - * channels or devices. All of these are presented to the PPC core - * as a single interrupt. The CPM interrupt handler dispatches its - * own handlers, in a similar fashion to the PPC core handler. We - * use the table as defined in the manuals (i.e. no special high - * priority and SCC1 == SCCa, etc...). - */ -/* #define CPMVEC_NR 32 */ -/* #define CPMVEC_PIO_PC15 ((ushort)0x1f) */ -/* #define CPMVEC_SCC1 ((ushort)0x1e) */ -/* #define CPMVEC_SCC2 ((ushort)0x1d) */ -/* #define CPMVEC_SCC3 ((ushort)0x1c) */ -/* #define CPMVEC_SCC4 ((ushort)0x1b) */ -/* #define CPMVEC_PIO_PC14 ((ushort)0x1a) */ -/* #define CPMVEC_TIMER1 ((ushort)0x19) */ -/* #define CPMVEC_PIO_PC13 ((ushort)0x18) */ -/* #define CPMVEC_PIO_PC12 ((ushort)0x17) */ -/* #define CPMVEC_SDMA_CB_ERR ((ushort)0x16) */ -/* #define CPMVEC_IDMA1 ((ushort)0x15) */ -/* #define CPMVEC_IDMA2 ((ushort)0x14) */ -/* #define CPMVEC_TIMER2 ((ushort)0x12) */ -/* #define CPMVEC_RISCTIMER ((ushort)0x11) */ -/* #define CPMVEC_I2C ((ushort)0x10) */ -/* #define CPMVEC_PIO_PC11 ((ushort)0x0f) */ -/* #define CPMVEC_PIO_PC10 ((ushort)0x0e) */ -/* #define CPMVEC_TIMER3 ((ushort)0x0c) */ -/* #define CPMVEC_PIO_PC9 ((ushort)0x0b) */ -/* #define CPMVEC_PIO_PC8 ((ushort)0x0a) */ -/* #define CPMVEC_PIO_PC7 ((ushort)0x09) */ -/* #define CPMVEC_TIMER4 ((ushort)0x07) */ -/* #define CPMVEC_PIO_PC6 ((ushort)0x06) */ -/* #define CPMVEC_SPI ((ushort)0x05) */ -/* #define CPMVEC_SMC1 ((ushort)0x04) */ -/* #define CPMVEC_SMC2 ((ushort)0x03) */ -/* #define CPMVEC_PIO_PC5 ((ushort)0x02) */ -/* #define CPMVEC_PIO_PC4 ((ushort)0x01) */ -/* #define CPMVEC_ERROR ((ushort)0x00) */ - -extern void cpm_install_handler(int vec, void (*handler)(void *), void *dev_id); - -/* CPM interrupt configuration vector. -*/ -#define CICR_SCD_SCC4 ((uint)0x00c00000) /* SCC4 @ SCCd */ -#define CICR_SCC_SCC3 ((uint)0x00200000) /* SCC3 @ SCCc */ -#define CICR_SCB_SCC2 ((uint)0x00040000) /* SCC2 @ SCCb */ -#define CICR_SCA_SCC1 ((uint)0x00000000) /* SCC1 @ SCCa */ -#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrupt */ -#define CICR_HP_MASK ((uint)0x00001f00) /* Hi-pri int. */ -#define CICR_IEN ((uint)0x00000080) /* Int. enable */ -#define CICR_SPS ((uint)0x00000001) /* SCC Spread */ -#endif /* __CPM_360__ */ diff --git a/arch/m68knommu/include/asm/cputime.h b/arch/m68knommu/include/asm/cputime.h deleted file mode 100644 index a0c4a660878..00000000000 --- a/arch/m68knommu/include/asm/cputime.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __M68KNOMMU_CPUTIME_H -#define __M68KNOMMU_CPUTIME_H - -#include <asm-generic/cputime.h> - -#endif /* __M68KNOMMU_CPUTIME_H */ diff --git a/arch/m68knommu/include/asm/current.h b/arch/m68knommu/include/asm/current.h deleted file mode 100644 index 53ee0f9f7ce..00000000000 --- a/arch/m68knommu/include/asm/current.h +++ /dev/null @@ -1,24 +0,0 @@ -#ifndef _M68KNOMMU_CURRENT_H -#define _M68KNOMMU_CURRENT_H -/* - * current.h - * (C) Copyright 2000, Lineo, David McCullough <davidm@uclinux.org> - * (C) Copyright 2002, Greg Ungerer (gerg@snapgear.com) - * - * rather than dedicate a register (as the m68k source does), we - * just keep a global, we should probably just change it all to be - * current and lose _current_task. - */ - -#include <linux/thread_info.h> - -struct task_struct; - -static inline struct task_struct *get_current(void) -{ - return(current_thread_info()->task); -} - -#define current get_current() - -#endif /* _M68KNOMMU_CURRENT_H */ diff --git a/arch/m68knommu/include/asm/dbg.h b/arch/m68knommu/include/asm/dbg.h deleted file mode 100644 index 27af3270f67..00000000000 --- a/arch/m68knommu/include/asm/dbg.h +++ /dev/null @@ -1,6 +0,0 @@ -#define DEBUG 1 -#ifdef CONFIG_COLDFIRE -#define BREAK asm volatile ("halt") -#else -#define BREAK *(volatile unsigned char *)0xdeadbee0 = 0 -#endif diff --git a/arch/m68knommu/include/asm/delay.h b/arch/m68knommu/include/asm/delay.h deleted file mode 100644 index 55cbd6294ab..00000000000 --- a/arch/m68knommu/include/asm/delay.h +++ /dev/null @@ -1,76 +0,0 @@ -#ifndef _M68KNOMMU_DELAY_H -#define _M68KNOMMU_DELAY_H - -/* - * Copyright (C) 1994 Hamish Macdonald - * Copyright (C) 2004 Greg Ungerer <gerg@snapgear.com> - */ - -#include <asm/param.h> - -static inline void __delay(unsigned long loops) -{ -#if defined(CONFIG_COLDFIRE) - /* The coldfire runs this loop at significantly different speeds - * depending upon long word alignment or not. We'll pad it to - * long word alignment which is the faster version. - * The 0x4a8e is of course a 'tstl %fp' instruction. This is better - * than using a NOP (0x4e71) instruction because it executes in one - * cycle not three and doesn't allow for an arbitary delay waiting - * for bus cycles to finish. Also fp/a6 isn't likely to cause a - * stall waiting for the register to become valid if such is added - * to the coldfire at some stage. - */ - __asm__ __volatile__ ( ".balignw 4, 0x4a8e\n\t" - "1: subql #1, %0\n\t" - "jcc 1b" - : "=d" (loops) : "0" (loops)); -#else - __asm__ __volatile__ ( "1: subql #1, %0\n\t" - "jcc 1b" - : "=d" (loops) : "0" (loops)); -#endif -} - -/* - * Ideally we use a 32*32->64 multiply to calculate the number of - * loop iterations, but the older standard 68k and ColdFire do not - * have this instruction. So for them we have a clsoe approximation - * loop using 32*32->32 multiplies only. This calculation based on - * the ARM version of delay. - * - * We want to implement: - * - * loops = (usecs * 0x10c6 * HZ * loops_per_jiffy) / 2^32 - */ - -#define HZSCALE (268435456 / (1000000/HZ)) - -extern unsigned long loops_per_jiffy; - -static inline void _udelay(unsigned long usecs) -{ -#if defined(CONFIG_M68328) || defined(CONFIG_M68EZ328) || \ - defined(CONFIG_M68VZ328) || defined(CONFIG_M68360) || \ - defined(CONFIG_COLDFIRE) - __delay((((usecs * HZSCALE) >> 11) * (loops_per_jiffy >> 11)) >> 6); -#else - unsigned long tmp; - - usecs *= 4295; /* 2**32 / 1000000 */ - __asm__ ("mulul %2,%0:%1" - : "=d" (usecs), "=d" (tmp) - : "d" (usecs), "1" (loops_per_jiffy*HZ)); - __delay(usecs); -#endif -} - -/* - * Moved the udelay() function into library code, no longer inlined. - * I had to change the algorithm because we are overflowing now on - * the faster ColdFire parts. The code is a little bigger, so it makes - * sense to library it. - */ -extern void udelay(unsigned long usecs); - -#endif /* defined(_M68KNOMMU_DELAY_H) */ diff --git a/arch/m68knommu/include/asm/device.h b/arch/m68knommu/include/asm/device.h deleted file mode 100644 index d8f9872b0e2..00000000000 --- a/arch/m68knommu/include/asm/device.h +++ /dev/null @@ -1,7 +0,0 @@ -/* - * Arch specific extensions to struct device - * - * This file is released under the GPLv2 - */ -#include <asm-generic/device.h> - diff --git a/arch/m68knommu/include/asm/div64.h b/arch/m68knommu/include/asm/div64.h deleted file mode 100644 index 6cd978cefb2..00000000000 --- a/arch/m68knommu/include/asm/div64.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/div64.h> diff --git a/arch/m68knommu/include/asm/dma-mapping.h b/arch/m68knommu/include/asm/dma-mapping.h deleted file mode 100644 index 6aeab18e58b..00000000000 --- a/arch/m68knommu/include/asm/dma-mapping.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef _M68KNOMMU_DMA_MAPPING_H -#define _M68KNOMMU_DMA_MAPPING_H - -#ifdef CONFIG_PCI -#include <asm-generic/dma-mapping.h> -#else -#include <asm-generic/dma-mapping-broken.h> -#endif - -#endif /* _M68KNOMMU_DMA_MAPPING_H */ diff --git a/arch/m68knommu/include/asm/dma.h b/arch/m68knommu/include/asm/dma.h deleted file mode 100644 index 939a0205621..00000000000 --- a/arch/m68knommu/include/asm/dma.h +++ /dev/null @@ -1,494 +0,0 @@ -#ifndef _M68K_DMA_H -#define _M68K_DMA_H 1 - -//#define DMA_DEBUG 1 - - -#ifdef CONFIG_COLDFIRE -/* - * ColdFire DMA Model: - * ColdFire DMA supports two forms of DMA: Single and Dual address. Single - * address mode emits a source address, and expects that the device will either - * pick up the data (DMA READ) or source data (DMA WRITE). This implies that - * the device will place data on the correct byte(s) of the data bus, as the - * memory transactions are always 32 bits. This implies that only 32 bit - * devices will find single mode transfers useful. Dual address DMA mode - * performs two cycles: source read and destination write. ColdFire will - * align the data so that the device will always get the correct bytes, thus - * is useful for 8 and 16 bit devices. This is the mode that is supported - * below. - * - * AUG/22/2000 : added support for 32-bit Dual-Address-Mode (K) 2000 - * Oliver Kamphenkel (O.Kamphenkel@tu-bs.de) - * - * AUG/25/2000 : addad support for 8, 16 and 32-bit Single-Address-Mode (K)2000 - * Oliver Kamphenkel (O.Kamphenkel@tu-bs.de) - * - * APR/18/2002 : added proper support for MCF5272 DMA controller. - * Arthur Shipkowski (art@videon-central.com) - */ - -#include <asm/coldfire.h> -#include <asm/mcfsim.h> -#include <asm/mcfdma.h> - -/* - * Set number of channels of DMA on ColdFire for different implementations. - */ -#if defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) || \ - defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) -#define MAX_M68K_DMA_CHANNELS 4 -#elif defined(CONFIG_M5272) -#define MAX_M68K_DMA_CHANNELS 1 -#elif defined(CONFIG_M532x) -#define MAX_M68K_DMA_CHANNELS 0 -#else -#define MAX_M68K_DMA_CHANNELS 2 -#endif - -extern unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS]; -extern unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS]; - -#if !defined(CONFIG_M5272) -#define DMA_MODE_WRITE_BIT 0x01 /* Memory/IO to IO/Memory select */ -#define DMA_MODE_WORD_BIT 0x02 /* 8 or 16 bit transfers */ -#define DMA_MODE_LONG_BIT 0x04 /* or 32 bit transfers */ -#define DMA_MODE_SINGLE_BIT 0x08 /* single-address-mode */ - -/* I/O to memory, 8 bits, mode */ -#define DMA_MODE_READ 0 -/* memory to I/O, 8 bits, mode */ -#define DMA_MODE_WRITE 1 -/* I/O to memory, 16 bits, mode */ -#define DMA_MODE_READ_WORD 2 -/* memory to I/O, 16 bits, mode */ -#define DMA_MODE_WRITE_WORD 3 -/* I/O to memory, 32 bits, mode */ -#define DMA_MODE_READ_LONG 4 -/* memory to I/O, 32 bits, mode */ -#define DMA_MODE_WRITE_LONG 5 -/* I/O to memory, 8 bits, single-address-mode */ -#define DMA_MODE_READ_SINGLE 8 -/* memory to I/O, 8 bits, single-address-mode */ -#define DMA_MODE_WRITE_SINGLE 9 -/* I/O to memory, 16 bits, single-address-mode */ -#define DMA_MODE_READ_WORD_SINGLE 10 -/* memory to I/O, 16 bits, single-address-mode */ -#define DMA_MODE_WRITE_WORD_SINGLE 11 -/* I/O to memory, 32 bits, single-address-mode */ -#define DMA_MODE_READ_LONG_SINGLE 12 -/* memory to I/O, 32 bits, single-address-mode */ -#define DMA_MODE_WRITE_LONG_SINGLE 13 - -#else /* CONFIG_M5272 is defined */ - -/* Source static-address mode */ -#define DMA_MODE_SRC_SA_BIT 0x01 -/* Two bits to select between all four modes */ -#define DMA_MODE_SSIZE_MASK 0x06 -/* Offset to shift bits in */ -#define DMA_MODE_SSIZE_OFF 0x01 -/* Destination static-address mode */ -#define DMA_MODE_DES_SA_BIT 0x10 -/* Two bits to select between all four modes */ -#define DMA_MODE_DSIZE_MASK 0x60 -/* Offset to shift bits in */ -#define DMA_MODE_DSIZE_OFF 0x05 -/* Size modifiers */ -#define DMA_MODE_SIZE_LONG 0x00 -#define DMA_MODE_SIZE_BYTE 0x01 -#define DMA_MODE_SIZE_WORD 0x02 -#define DMA_MODE_SIZE_LINE 0x03 - -/* - * Aliases to help speed quick ports; these may be suboptimal, however. They - * do not include the SINGLE mode modifiers since the MCF5272 does not have a - * mode where the device is in control of its addressing. - */ - -/* I/O to memory, 8 bits, mode */ -#define DMA_MODE_READ ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT) -/* memory to I/O, 8 bits, mode */ -#define DMA_MODE_WRITE ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT) -/* I/O to memory, 16 bits, mode */ -#define DMA_MODE_READ_WORD ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT) -/* memory to I/O, 16 bits, mode */ -#define DMA_MODE_WRITE_WORD ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT) -/* I/O to memory, 32 bits, mode */ -#define DMA_MODE_READ_LONG ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT) -/* memory to I/O, 32 bits, mode */ -#define DMA_MODE_WRITE_LONG ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT) - -#endif /* !defined(CONFIG_M5272) */ - -#if !defined(CONFIG_M5272) -/* enable/disable a specific DMA channel */ -static __inline__ void enable_dma(unsigned int dmanr) -{ - volatile unsigned short *dmawp; - -#ifdef DMA_DEBUG - printk("enable_dma(dmanr=%d)\n", dmanr); -#endif - - dmawp = (unsigned short *) dma_base_addr[dmanr]; - dmawp[MCFDMA_DCR] |= MCFDMA_DCR_EEXT; -} - -static __inline__ void disable_dma(unsigned int dmanr) -{ - volatile unsigned short *dmawp; - volatile unsigned char *dmapb; - -#ifdef DMA_DEBUG - printk("disable_dma(dmanr=%d)\n", dmanr); -#endif - - dmawp = (unsigned short *) dma_base_addr[dmanr]; - dmapb = (unsigned char *) dma_base_addr[dmanr]; - - /* Turn off external requests, and stop any DMA in progress */ - dmawp[MCFDMA_DCR] &= ~MCFDMA_DCR_EEXT; - dmapb[MCFDMA_DSR] = MCFDMA_DSR_DONE; -} - -/* - * Clear the 'DMA Pointer Flip Flop'. - * Write 0 for LSB/MSB, 1 for MSB/LSB access. - * Use this once to initialize the FF to a known state. - * After that, keep track of it. :-) - * --- In order to do that, the DMA routines below should --- - * --- only be used while interrupts are disabled! --- - * - * This is a NOP for ColdFire. Provide a stub for compatibility. - */ -static __inline__ void clear_dma_ff(unsigned int dmanr) -{ -} - -/* set mode (above) for a specific DMA channel */ -static __inline__ void set_dma_mode(unsigned int dmanr, char mode) -{ - - volatile unsigned char *dmabp; - volatile unsigned short *dmawp; - -#ifdef DMA_DEBUG - printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode); -#endif - - dmabp = (unsigned char *) dma_base_addr[dmanr]; - dmawp = (unsigned short *) dma_base_addr[dmanr]; - - // Clear config errors - dmabp[MCFDMA_DSR] = MCFDMA_DSR_DONE; - - // Set command register - dmawp[MCFDMA_DCR] = - MCFDMA_DCR_INT | // Enable completion irq - MCFDMA_DCR_CS | // Force one xfer per request - MCFDMA_DCR_AA | // Enable auto alignment - // single-address-mode - ((mode & DMA_MODE_SINGLE_BIT) ? MCFDMA_DCR_SAA : 0) | - // sets s_rw (-> r/w) high if Memory to I/0 - ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_S_RW : 0) | - // Memory to I/O or I/O to Memory - ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_SINC : MCFDMA_DCR_DINC) | - // 32 bit, 16 bit or 8 bit transfers - ((mode & DMA_MODE_WORD_BIT) ? MCFDMA_DCR_SSIZE_WORD : - ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_SSIZE_LONG : - MCFDMA_DCR_SSIZE_BYTE)) | - ((mode & DMA_MODE_WORD_BIT) ? MCFDMA_DCR_DSIZE_WORD : - ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_DSIZE_LONG : - MCFDMA_DCR_DSIZE_BYTE)); - -#ifdef DEBUG_DMA - printk("%s(%d): dmanr=%d DSR[%x]=%x DCR[%x]=%x\n", __FILE__, __LINE__, - dmanr, (int) &dmabp[MCFDMA_DSR], dmabp[MCFDMA_DSR], - (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR]); -#endif -} - -/* Set transfer address for specific DMA channel */ -static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a) -{ - volatile unsigned short *dmawp; - volatile unsigned int *dmalp; - -#ifdef DMA_DEBUG - printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a); -#endif - - dmawp = (unsigned short *) dma_base_addr[dmanr]; - dmalp = (unsigned int *) dma_base_addr[dmanr]; - - // Determine which address registers are used for memory/device accesses - if (dmawp[MCFDMA_DCR] & MCFDMA_DCR_SINC) { - // Source incrementing, must be memory - dmalp[MCFDMA_SAR] = a; - // Set dest address, must be device - dmalp[MCFDMA_DAR] = dma_device_address[dmanr]; - } else { - // Destination incrementing, must be memory - dmalp[MCFDMA_DAR] = a; - // Set source address, must be device - dmalp[MCFDMA_SAR] = dma_device_address[dmanr]; - } - -#ifdef DEBUG_DMA - printk("%s(%d): dmanr=%d DCR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n", - __FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR], - (int) &dmalp[MCFDMA_SAR], dmalp[MCFDMA_SAR], - (int) &dmalp[MCFDMA_DAR], dmalp[MCFDMA_DAR]); -#endif -} - -/* - * Specific for Coldfire - sets device address. - * Should be called after the mode set call, and before set DMA address. - */ -static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a) -{ -#ifdef DMA_DEBUG - printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a); -#endif - - dma_device_address[dmanr] = a; -} - -/* - * NOTE 2: "count" represents _bytes_. - */ -static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count) -{ - volatile unsigned short *dmawp; - -#ifdef DMA_DEBUG - printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count); -#endif - - dmawp = (unsigned short *) dma_base_addr[dmanr]; - dmawp[MCFDMA_BCR] = (unsigned short)count; -} - -/* - * Get DMA residue count. After a DMA transfer, this - * should return zero. Reading this while a DMA transfer is - * still in progress will return unpredictable results. - * Otherwise, it returns the number of _bytes_ left to transfer. - */ -static __inline__ int get_dma_residue(unsigned int dmanr) -{ - volatile unsigned short *dmawp; - unsigned short count; - -#ifdef DMA_DEBUG - printk("get_dma_residue(dmanr=%d)\n", dmanr); -#endif - - dmawp = (unsigned short *) dma_base_addr[dmanr]; - count = dmawp[MCFDMA_BCR]; - return((int) count); -} -#else /* CONFIG_M5272 is defined */ - -/* - * The MCF5272 DMA controller is very different than the controller defined above - * in terms of register mapping. For instance, with the exception of the 16-bit - * interrupt register (IRQ#85, for reference), all of the registers are 32-bit. - * - * The big difference, however, is the lack of device-requested DMA. All modes - * are dual address transfer, and there is no 'device' setup or direction bit. - * You can DMA between a device and memory, between memory and memory, or even between - * two devices directly, with any combination of incrementing and non-incrementing - * addresses you choose. This puts a crimp in distinguishing between the 'device - * address' set up by set_dma_device_addr. - * - * Therefore, there are two options. One is to use set_dma_addr and set_dma_device_addr, - * which will act exactly as above in -- it will look to see if the source is set to - * autoincrement, and if so it will make the source use the set_dma_addr value and the - * destination the set_dma_device_addr value. Otherwise the source will be set to the - * set_dma_device_addr value and the destination will get the set_dma_addr value. - * - * The other is to use the provided set_dma_src_addr and set_dma_dest_addr functions - * and make it explicit. Depending on what you're doing, one of these two should work - * for you, but don't mix them in the same transfer setup. - */ - -/* enable/disable a specific DMA channel */ -static __inline__ void enable_dma(unsigned int dmanr) -{ - volatile unsigned int *dmalp; - -#ifdef DMA_DEBUG - printk("enable_dma(dmanr=%d)\n", dmanr); -#endif - - dmalp = (unsigned int *) dma_base_addr[dmanr]; - dmalp[MCFDMA_DMR] |= MCFDMA_DMR_EN; -} - -static __inline__ void disable_dma(unsigned int dmanr) -{ - volatile unsigned int *dmalp; - -#ifdef DMA_DEBUG - printk("disable_dma(dmanr=%d)\n", dmanr); -#endif - - dmalp = (unsigned int *) dma_base_addr[dmanr]; - - /* Turn off external requests, and stop any DMA in progress */ - dmalp[MCFDMA_DMR] &= ~MCFDMA_DMR_EN; - dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET; -} - -/* - * Clear the 'DMA Pointer Flip Flop'. - * Write 0 for LSB/MSB, 1 for MSB/LSB access. - * Use this once to initialize the FF to a known state. - * After that, keep track of it. :-) - * --- In order to do that, the DMA routines below should --- - * --- only be used while interrupts are disabled! --- - * - * This is a NOP for ColdFire. Provide a stub for compatibility. - */ -static __inline__ void clear_dma_ff(unsigned int dmanr) -{ -} - -/* set mode (above) for a specific DMA channel */ -static __inline__ void set_dma_mode(unsigned int dmanr, char mode) -{ - - volatile unsigned int *dmalp; - volatile unsigned short *dmawp; - -#ifdef DMA_DEBUG - printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode); -#endif - dmalp = (unsigned int *) dma_base_addr[dmanr]; - dmawp = (unsigned short *) dma_base_addr[dmanr]; - - // Clear config errors - dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET; - - // Set command register - dmalp[MCFDMA_DMR] = - MCFDMA_DMR_RQM_DUAL | // Mandatory Request Mode setting - MCFDMA_DMR_DSTT_SD | // Set up addressing types; set to supervisor-data. - MCFDMA_DMR_SRCT_SD | // Set up addressing types; set to supervisor-data. - // source static-address-mode - ((mode & DMA_MODE_SRC_SA_BIT) ? MCFDMA_DMR_SRCM_SA : MCFDMA_DMR_SRCM_IA) | - // dest static-address-mode - ((mode & DMA_MODE_DES_SA_BIT) ? MCFDMA_DMR_DSTM_SA : MCFDMA_DMR_DSTM_IA) | - // burst, 32 bit, 16 bit or 8 bit transfers are separately configurable on the MCF5272 - (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_DSTS_OFF) | - (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_SRCS_OFF); - - dmawp[MCFDMA_DIR] |= MCFDMA_DIR_ASCEN; /* Enable completion interrupts */ - -#ifdef DEBUG_DMA - printk("%s(%d): dmanr=%d DMR[%x]=%x DIR[%x]=%x\n", __FILE__, __LINE__, - dmanr, (int) &dmalp[MCFDMA_DMR], dmabp[MCFDMA_DMR], - (int) &dmawp[MCFDMA_DIR], dmawp[MCFDMA_DIR]); -#endif -} - -/* Set transfer address for specific DMA channel */ -static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a) -{ - volatile unsigned int *dmalp; - -#ifdef DMA_DEBUG - printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a); -#endif - - dmalp = (unsigned int *) dma_base_addr[dmanr]; - - // Determine which address registers are used for memory/device accesses - if (dmalp[MCFDMA_DMR] & MCFDMA_DMR_SRCM) { - // Source incrementing, must be memory - dmalp[MCFDMA_DSAR] = a; - // Set dest address, must be device - dmalp[MCFDMA_DDAR] = dma_device_address[dmanr]; - } else { - // Destination incrementing, must be memory - dmalp[MCFDMA_DDAR] = a; - // Set source address, must be device - dmalp[MCFDMA_DSAR] = dma_device_address[dmanr]; - } - -#ifdef DEBUG_DMA - printk("%s(%d): dmanr=%d DMR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n", - __FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DMR], dmawp[MCFDMA_DMR], - (int) &dmalp[MCFDMA_DSAR], dmalp[MCFDMA_DSAR], - (int) &dmalp[MCFDMA_DDAR], dmalp[MCFDMA_DDAR]); -#endif -} - -/* - * Specific for Coldfire - sets device address. - * Should be called after the mode set call, and before set DMA address. - */ -static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a) -{ -#ifdef DMA_DEBUG - printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a); -#endif - - dma_device_address[dmanr] = a; -} - -/* - * NOTE 2: "count" represents _bytes_. - * - * NOTE 3: While a 32-bit register, "count" is only a maximum 24-bit value. - */ -static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count) -{ - volatile unsigned int *dmalp; - -#ifdef DMA_DEBUG - printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count); -#endif - - dmalp = (unsigned int *) dma_base_addr[dmanr]; - dmalp[MCFDMA_DBCR] = count; -} - -/* - * Get DMA residue count. After a DMA transfer, this - * should return zero. Reading this while a DMA transfer is - * still in progress will return unpredictable results. - * Otherwise, it returns the number of _bytes_ left to transfer. - */ -static __inline__ int get_dma_residue(unsigned int dmanr) -{ - volatile unsigned int *dmalp; - unsigned int count; - -#ifdef DMA_DEBUG - printk("get_dma_residue(dmanr=%d)\n", dmanr); -#endif - - dmalp = (unsigned int *) dma_base_addr[dmanr]; - count = dmalp[MCFDMA_DBCR]; - return(count); -} - -#endif /* !defined(CONFIG_M5272) */ -#endif /* CONFIG_COLDFIRE */ - -#define MAX_DMA_CHANNELS 8 - -/* Don't define MAX_DMA_ADDRESS; it's useless on the m68k/coldfire and any - occurrence should be flagged as an error. */ -/* under 2.4 it is actually needed by the new bootmem allocator */ -#define MAX_DMA_ADDRESS PAGE_OFFSET - -/* These are in kernel/dma.c: */ -extern int request_dma(unsigned int dmanr, const char *device_id); /* reserve a DMA channel */ -extern void free_dma(unsigned int dmanr); /* release it again */ - -#endif /* _M68K_DMA_H */ diff --git a/arch/m68knommu/include/asm/elf.h b/arch/m68knommu/include/asm/elf.h deleted file mode 100644 index b8046837f38..00000000000 --- a/arch/m68knommu/include/asm/elf.h +++ /dev/null @@ -1,110 +0,0 @@ -#ifndef __ASMm68k_ELF_H -#define __ASMm68k_ELF_H - -/* - * ELF register definitions.. - */ - -#include <asm/ptrace.h> -#include <asm/user.h> - -/* - * 68k ELF relocation types - */ -#define R_68K_NONE 0 -#define R_68K_32 1 -#define R_68K_16 2 -#define R_68K_8 3 -#define R_68K_PC32 4 -#define R_68K_PC16 5 -#define R_68K_PC8 6 -#define R_68K_GOT32 7 -#define R_68K_GOT16 8 -#define R_68K_GOT8 9 -#define R_68K_GOT32O 10 -#define R_68K_GOT16O 11 -#define R_68K_GOT8O 12 -#define R_68K_PLT32 13 -#define R_68K_PLT16 14 -#define R_68K_PLT8 15 -#define R_68K_PLT32O 16 -#define R_68K_PLT16O 17 -#define R_68K_PLT8O 18 -#define R_68K_COPY 19 -#define R_68K_GLOB_DAT 20 -#define R_68K_JMP_SLOT 21 -#define R_68K_RELATIVE 22 - -typedef unsigned long elf_greg_t; - -#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t)) -typedef elf_greg_t elf_gregset_t[ELF_NGREG]; - -typedef struct user_m68kfp_struct elf_fpregset_t; - -/* - * This is used to ensure we don't load something for the wrong architecture. - */ -#define elf_check_arch(x) ((x)->e_machine == EM_68K) - -/* - * These are used to set parameters in the core dumps. - */ -#define ELF_CLASS ELFCLASS32 -#define ELF_DATA ELFDATA2MSB -#define ELF_ARCH EM_68K - -/* For SVR4/m68k the function pointer to be registered with `atexit' is - passed in %a1. Although my copy of the ABI has no such statement, it - is actually used on ASV. */ -#define ELF_PLAT_INIT(_r, load_addr) _r->a1 = 0 - -#define USE_ELF_CORE_DUMP -#define ELF_EXEC_PAGESIZE 4096 - -/* This is the location that an ET_DYN program is loaded if exec'ed. Typical - use of this is to invoke "./ld.so someprog" to test out a new version of - the loader. We need to make sure that it is out of the way of the program - that it will "exec", and that there is sufficient room for the brk. */ - -#define ELF_ET_DYN_BASE 0xD0000000UL - -#define ELF_CORE_COPY_REGS(pr_reg, regs) \ - /* Bleech. */ \ - pr_reg[0] = regs->d1; \ - pr_reg[1] = regs->d2; \ - pr_reg[2] = regs->d3; \ - pr_reg[3] = regs->d4; \ - pr_reg[4] = regs->d5; \ - pr_reg[7] = regs->a0; \ - pr_reg[8] = regs->a1; \ - pr_reg[14] = regs->d0; \ - pr_reg[15] = rdusp(); \ - pr_reg[16] = 0 /* regs->orig_d0 */; \ - pr_reg[17] = regs->sr; \ - pr_reg[18] = regs->pc; \ - /* pr_reg[19] = (regs->format << 12) | regs->vector; */ \ - { \ - struct switch_stack *sw = ((struct switch_stack *)regs) - 1; \ - pr_reg[5] = sw->d6; \ - pr_reg[6] = sw->d7; \ - pr_reg[10] = sw->a3; \ - pr_reg[11] = sw->a4; \ - pr_reg[12] = sw->a5; \ - pr_reg[13] = sw->a6; \ - } - -/* This yields a mask that user programs can use to figure out what - instruction set this cpu supports. */ - -#define ELF_HWCAP (0) - -/* This yields a string that ld.so will use to load implementation - specific libraries for optimization. This is more specific in - intent than poking at uname or /proc/cpuinfo. */ - -#define ELF_PLATFORM (NULL) - -#define SET_PERSONALITY(ex) set_personality(PER_LINUX) - -#endif diff --git a/arch/m68knommu/include/asm/elia.h b/arch/m68knommu/include/asm/elia.h deleted file mode 100644 index e037d4e2de3..00000000000 --- a/arch/m68knommu/include/asm/elia.h +++ /dev/null @@ -1,41 +0,0 @@ -/****************************************************************************/ - -/* - * elia.h -- Lineo (formerly Moreton Bay) eLIA platform support. - * - * (C) Copyright 1999-2000, Moreton Bay (www.moreton.com.au) - * (C) Copyright 1999-2000, Lineo (www.lineo.com) - */ - -/****************************************************************************/ -#ifndef elia_h -#define elia_h -/****************************************************************************/ - -#include <asm/coldfire.h> - -#ifdef CONFIG_eLIA - -/* - * The serial port DTR and DCD lines are also on the Parallel I/O - * as well, so define those too. - */ - -#define eLIA_DCD1 0x0001 -#define eLIA_DCD0 0x0002 -#define eLIA_DTR1 0x0004 -#define eLIA_DTR0 0x0008 - -#define eLIA_PCIRESET 0x0020 - -/* - * Kernel macros to set and unset the LEDs. - */ -#ifndef __ASSEMBLY__ -extern unsigned short ppdata; -#endif /* __ASSEMBLY__ */ - -#endif /* CONFIG_eLIA */ - -/****************************************************************************/ -#endif /* elia_h */ diff --git a/arch/m68knommu/include/asm/emergency-restart.h b/arch/m68knommu/include/asm/emergency-restart.h deleted file mode 100644 index 108d8c48e42..00000000000 --- a/arch/m68knommu/include/asm/emergency-restart.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_EMERGENCY_RESTART_H -#define _ASM_EMERGENCY_RESTART_H - -#include <asm-generic/emergency-restart.h> - -#endif /* _ASM_EMERGENCY_RESTART_H */ diff --git a/arch/m68knommu/include/asm/entry.h b/arch/m68knommu/include/asm/entry.h deleted file mode 100644 index c2553d26273..00000000000 --- a/arch/m68knommu/include/asm/entry.h +++ /dev/null @@ -1,182 +0,0 @@ -#ifndef __M68KNOMMU_ENTRY_H -#define __M68KNOMMU_ENTRY_H - -#include <asm/setup.h> -#include <asm/page.h> - -/* - * Stack layout in 'ret_from_exception': - * - * This allows access to the syscall arguments in registers d1-d5 - * - * 0(sp) - d1 - * 4(sp) - d2 - * 8(sp) - d3 - * C(sp) - d4 - * 10(sp) - d5 - * 14(sp) - a0 - * 18(sp) - a1 - * 1C(sp) - a2 - * 20(sp) - d0 - * 24(sp) - orig_d0 - * 28(sp) - stack adjustment - * 2C(sp) - [ sr ] [ format & vector ] - * 2E(sp) - [ pc-hiword ] [ sr ] - * 30(sp) - [ pc-loword ] [ pc-hiword ] - * 32(sp) - [ format & vector ] [ pc-loword ] - * ^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^ - * M68K COLDFIRE - */ - -#define ALLOWINT 0xf8ff - -#ifdef __ASSEMBLY__ - -/* process bits for task_struct.flags */ -PF_TRACESYS_OFF = 3 -PF_TRACESYS_BIT = 5 -PF_PTRACED_OFF = 3 -PF_PTRACED_BIT = 4 -PF_DTRACE_OFF = 1 -PF_DTRACE_BIT = 5 - -LENOSYS = 38 - -#define SWITCH_STACK_SIZE (6*4+4) /* Includes return address */ - -/* - * This defines the normal kernel pt-regs layout. - * - * regs are a2-a6 and d6-d7 preserved by C code - * the kernel doesn't mess with usp unless it needs to - */ - -#ifdef CONFIG_COLDFIRE -/* - * This is made a little more tricky on the ColdFire. There is no - * separate kernel and user stack pointers. Need to artificially - * construct a usp in software... When doing this we need to disable - * interrupts, otherwise bad things could happen. - */ -.macro SAVE_ALL - move #0x2700,%sr /* disable intrs */ - btst #5,%sp@(2) /* from user? */ - bnes 6f /* no, skip */ - movel %sp,sw_usp /* save user sp */ - addql #8,sw_usp /* remove exception */ - movel sw_ksp,%sp /* kernel sp */ - subql #8,%sp /* room for exception */ - clrl %sp@- /* stkadj */ - movel %d0,%sp@- /* orig d0 */ - movel %d0,%sp@- /* d0 */ - lea %sp@(-32),%sp /* space for 8 regs */ - moveml %d1-%d5/%a0-%a2,%sp@ - movel sw_usp,%a0 /* get usp */ - movel %a0@-,%sp@(PT_PC) /* copy exception program counter */ - movel %a0@-,%sp@(PT_FORMATVEC)/* copy exception format/vector/sr */ - bra 7f - 6: - clrl %sp@- /* stkadj */ - movel %d0,%sp@- /* orig d0 */ - movel %d0,%sp@- /* d0 */ - lea %sp@(-32),%sp /* space for 8 regs */ - moveml %d1-%d5/%a0-%a2,%sp@ - 7: -.endm - -.macro RESTORE_ALL - btst #5,%sp@(PT_SR) /* going user? */ - bnes 8f /* no, skip */ - move #0x2700,%sr /* disable intrs */ - movel sw_usp,%a0 /* get usp */ - movel %sp@(PT_PC),%a0@- /* copy exception program counter */ - movel %sp@(PT_FORMATVEC),%a0@-/* copy exception format/vector/sr */ - moveml %sp@,%d1-%d5/%a0-%a2 - lea %sp@(32),%sp /* space for 8 regs */ - movel %sp@+,%d0 - addql #4,%sp /* orig d0 */ - addl %sp@+,%sp /* stkadj */ - addql #8,%sp /* remove exception */ - movel %sp,sw_ksp /* save ksp */ - subql #8,sw_usp /* set exception */ - movel sw_usp,%sp /* restore usp */ - rte - 8: - moveml %sp@,%d1-%d5/%a0-%a2 - lea %sp@(32),%sp /* space for 8 regs */ - movel %sp@+,%d0 - addql #4,%sp /* orig d0 */ - addl %sp@+,%sp /* stkadj */ - rte -.endm - -/* - * Quick exception save, use current stack only. - */ -.macro SAVE_LOCAL - move #0x2700,%sr /* disable intrs */ - clrl %sp@- /* stkadj */ - movel %d0,%sp@- /* orig d0 */ - movel %d0,%sp@- /* d0 */ - lea %sp@(-32),%sp /* space for 8 regs */ - moveml %d1-%d5/%a0-%a2,%sp@ -.endm - -.macro RESTORE_LOCAL - moveml %sp@,%d1-%d5/%a0-%a2 - lea %sp@(32),%sp /* space for 8 regs */ - movel %sp@+,%d0 - addql #4,%sp /* orig d0 */ - addl %sp@+,%sp /* stkadj */ - rte -.endm - -.macro SAVE_SWITCH_STACK - lea %sp@(-24),%sp /* 6 regs */ - moveml %a3-%a6/%d6-%d7,%sp@ -.endm - -.macro RESTORE_SWITCH_STACK - moveml %sp@,%a3-%a6/%d6-%d7 - lea %sp@(24),%sp /* 6 regs */ -.endm - -/* - * Software copy of the user and kernel stack pointers... Ugh... - * Need these to get around ColdFire not having separate kernel - * and user stack pointers. - */ -.globl sw_usp -.globl sw_ksp - -#else /* !CONFIG_COLDFIRE */ - -/* - * Standard 68k interrupt entry and exit macros. - */ -.macro SAVE_ALL - clrl %sp@- /* stkadj */ - movel %d0,%sp@- /* orig d0 */ - movel %d0,%sp@- /* d0 */ - moveml %d1-%d5/%a0-%a2,%sp@- -.endm - -.macro RESTORE_ALL - moveml %sp@+,%a0-%a2/%d1-%d5 - movel %sp@+,%d0 - addql #4,%sp /* orig d0 */ - addl %sp@+,%sp /* stkadj */ - rte -.endm - -.macro SAVE_SWITCH_STACK - moveml %a3-%a6/%d6-%d7,%sp@- -.endm - -.macro RESTORE_SWITCH_STACK - moveml %sp@+,%a3-%a6/%d6-%d7 -.endm - -#endif /* !CONFIG_COLDFIRE */ -#endif /* __ASSEMBLY__ */ -#endif /* __M68KNOMMU_ENTRY_H */ diff --git a/arch/m68knommu/include/asm/errno.h b/arch/m68knommu/include/asm/errno.h deleted file mode 100644 index 7e8c22b9a5e..00000000000 --- a/arch/m68knommu/include/asm/errno.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/errno.h> diff --git a/arch/m68knommu/include/asm/fb.h b/arch/m68knommu/include/asm/fb.h deleted file mode 100644 index c7df3803099..00000000000 --- a/arch/m68knommu/include/asm/fb.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef _ASM_FB_H_ -#define _ASM_FB_H_ -#include <linux/fb.h> - -#define fb_pgprotect(...) do {} while (0) - -static inline int fb_is_primary_device(struct fb_info *info) -{ - return 0; -} - -#endif /* _ASM_FB_H_ */ diff --git a/arch/m68knommu/include/asm/fcntl.h b/arch/m68knommu/include/asm/fcntl.h deleted file mode 100644 index f6a552cda4c..00000000000 --- a/arch/m68knommu/include/asm/fcntl.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/fcntl.h> diff --git a/arch/m68knommu/include/asm/flat.h b/arch/m68knommu/include/asm/flat.h deleted file mode 100644 index 814b5174a8e..00000000000 --- a/arch/m68knommu/include/asm/flat.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * include/asm-m68knommu/flat.h -- uClinux flat-format executables - */ - -#ifndef __M68KNOMMU_FLAT_H__ -#define __M68KNOMMU_FLAT_H__ - -#define flat_stack_align(sp) /* nothing needed */ -#define flat_argvp_envp_on_stack() 1 -#define flat_old_ram_flag(flags) (flags) -#define flat_reloc_valid(reloc, size) ((reloc) <= (size)) -#define flat_get_addr_from_rp(rp, relval, flags, p) get_unaligned(rp) -#define flat_put_addr_at_rp(rp, val, relval) put_unaligned(val,rp) -#define flat_get_relocate_addr(rel) (rel) -#define flat_set_persistent(relval, p) 0 - -#endif /* __M68KNOMMU_FLAT_H__ */ diff --git a/arch/m68knommu/include/asm/fpu.h b/arch/m68knommu/include/asm/fpu.h deleted file mode 100644 index b16b2e4fca2..00000000000 --- a/arch/m68knommu/include/asm/fpu.h +++ /dev/null @@ -1,21 +0,0 @@ -#ifndef __M68KNOMMU_FPU_H -#define __M68KNOMMU_FPU_H - - -/* - * MAX floating point unit state size (FSAVE/FRESTORE) - */ -#if defined(CONFIG_M68020) || defined(CONFIG_M68030) -#define FPSTATESIZE (216/sizeof(unsigned char)) -#elif defined(CONFIG_M68040) -#define FPSTATESIZE (96/sizeof(unsigned char)) -#elif defined(CONFIG_M68KFPU_EMU) -#define FPSTATESIZE (28/sizeof(unsigned char)) -#elif defined(CONFIG_M68060) -#define FPSTATESIZE (12/sizeof(unsigned char)) -#else -/* Assume no FP unit present then... */ -#define FPSTATESIZE (2) /* dummy size */ -#endif - -#endif /* __M68K_FPU_H */ diff --git a/arch/m68knommu/include/asm/futex.h b/arch/m68knommu/include/asm/futex.h deleted file mode 100644 index 6a332a9f099..00000000000 --- a/arch/m68knommu/include/asm/futex.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_FUTEX_H -#define _ASM_FUTEX_H - -#include <asm-generic/futex.h> - -#endif diff --git a/arch/m68knommu/include/asm/hardirq.h b/arch/m68knommu/include/asm/hardirq.h deleted file mode 100644 index bfad28149a4..00000000000 --- a/arch/m68knommu/include/asm/hardirq.h +++ /dev/null @@ -1,27 +0,0 @@ -#ifndef __M68K_HARDIRQ_H -#define __M68K_HARDIRQ_H - -#include <linux/cache.h> -#include <linux/threads.h> -#include <asm/irq.h> - -typedef struct { - unsigned int __softirq_pending; -} ____cacheline_aligned irq_cpustat_t; - -#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */ - -#define HARDIRQ_BITS 8 - -/* - * The hardirq mask has to be large enough to have - * space for potentially all IRQ sources in the system - * nesting on a single CPU: - */ -#if (1 << HARDIRQ_BITS) < NR_IRQS -# error HARDIRQ_BITS is too low! -#endif - -void ack_bad_irq(unsigned int irq); - -#endif /* __M68K_HARDIRQ_H */ diff --git a/arch/m68knommu/include/asm/hw_irq.h b/arch/m68knommu/include/asm/hw_irq.h deleted file mode 100644 index f3ec9e5ae04..00000000000 --- a/arch/m68knommu/include/asm/hw_irq.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef __M68KNOMMU_HW_IRQ_H__ -#define __M68KNOMMU_HW_IRQ_H__ - -#endif /* __M68KNOMMU_HW_IRQ_H__ */ diff --git a/arch/m68knommu/include/asm/hwtest.h b/arch/m68knommu/include/asm/hwtest.h deleted file mode 100644 index 700626a1b1b..00000000000 --- a/arch/m68knommu/include/asm/hwtest.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/hwtest.h> diff --git a/arch/m68knommu/include/asm/io.h b/arch/m68knommu/include/asm/io.h deleted file mode 100644 index 6adef1ee208..00000000000 --- a/arch/m68knommu/include/asm/io.h +++ /dev/null @@ -1,194 +0,0 @@ -#ifndef _M68KNOMMU_IO_H -#define _M68KNOMMU_IO_H - -#ifdef __KERNEL__ - - -/* - * These are for ISA/PCI shared memory _only_ and should never be used - * on any other type of memory, including Zorro memory. They are meant to - * access the bus in the bus byte order which is little-endian!. - * - * readX/writeX() are used to access memory mapped devices. On some - * architectures the memory mapped IO stuff needs to be accessed - * differently. On the m68k architecture, we just read/write the - * memory location directly. - */ -/* ++roman: The assignments to temp. vars avoid that gcc sometimes generates - * two accesses to memory, which may be undesireable for some devices. - */ - -/* - * swap functions are sometimes needed to interface little-endian hardware - */ -static inline unsigned short _swapw(volatile unsigned short v) -{ - return ((v << 8) | (v >> 8)); -} - -static inline unsigned int _swapl(volatile unsigned long v) -{ - return ((v << 24) | ((v & 0xff00) << 8) | ((v & 0xff0000) >> 8) | (v >> 24)); -} - -#define readb(addr) \ - ({ unsigned char __v = (*(volatile unsigned char *) (addr)); __v; }) -#define readw(addr) \ - ({ unsigned short __v = (*(volatile unsigned short *) (addr)); __v; }) -#define readl(addr) \ - ({ unsigned int __v = (*(volatile unsigned int *) (addr)); __v; }) - -#define readb_relaxed(addr) readb(addr) -#define readw_relaxed(addr) readw(addr) -#define readl_relaxed(addr) readl(addr) - -#define writeb(b,addr) (void)((*(volatile unsigned char *) (addr)) = (b)) -#define writew(b,addr) (void)((*(volatile unsigned short *) (addr)) = (b)) -#define writel(b,addr) (void)((*(volatile unsigned int *) (addr)) = (b)) - -#define __raw_readb readb -#define __raw_readw readw -#define __raw_readl readl -#define __raw_writeb writeb -#define __raw_writew writew -#define __raw_writel writel - -static inline void io_outsb(unsigned int addr, void *buf, int len) -{ - volatile unsigned char *ap = (volatile unsigned char *) addr; - unsigned char *bp = (unsigned char *) buf; - while (len--) - *ap = *bp++; -} - -static inline void io_outsw(unsigned int addr, void *buf, int len) -{ - volatile unsigned short *ap = (volatile unsigned short *) addr; - unsigned short *bp = (unsigned short *) buf; - while (len--) - *ap = _swapw(*bp++); -} - -static inline void io_outsl(unsigned int addr, void *buf, int len) -{ - volatile unsigned int *ap = (volatile unsigned int *) addr; - unsigned int *bp = (unsigned int *) buf; - while (len--) - *ap = _swapl(*bp++); -} - -static inline void io_insb(unsigned int addr, void *buf, int len) -{ - volatile unsigned char *ap = (volatile unsigned char *) addr; - unsigned char *bp = (unsigned char *) buf; - while (len--) - *bp++ = *ap; -} - -static inline void io_insw(unsigned int addr, void *buf, int len) -{ - volatile unsigned short *ap = (volatile unsigned short *) addr; - unsigned short *bp = (unsigned short *) buf; - while (len--) - *bp++ = _swapw(*ap); -} - -static inline void io_insl(unsigned int addr, void *buf, int len) -{ - volatile unsigned int *ap = (volatile unsigned int *) addr; - unsigned int *bp = (unsigned int *) buf; - while (len--) - *bp++ = _swapl(*ap); -} - -#define mmiowb() - -/* - * make the short names macros so specific devices - * can override them as required - */ - -#define memset_io(a,b,c) memset((void *)(a),(b),(c)) -#define memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c)) -#define memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c)) - -#define inb(addr) readb(addr) -#define inw(addr) readw(addr) -#define inl(addr) readl(addr) -#define outb(x,addr) ((void) writeb(x,addr)) -#define outw(x,addr) ((void) writew(x,addr)) -#define outl(x,addr) ((void) writel(x,addr)) - -#define inb_p(addr) inb(addr) -#define inw_p(addr) inw(addr) -#define inl_p(addr) inl(addr) -#define outb_p(x,addr) outb(x,addr) -#define outw_p(x,addr) outw(x,addr) -#define outl_p(x,addr) outl(x,addr) - -#define outsb(a,b,l) io_outsb(a,b,l) -#define outsw(a,b,l) io_outsw(a,b,l) -#define outsl(a,b,l) io_outsl(a,b,l) - -#define insb(a,b,l) io_insb(a,b,l) -#define insw(a,b,l) io_insw(a,b,l) -#define insl(a,b,l) io_insl(a,b,l) - -#define IO_SPACE_LIMIT 0xffff - - -/* Values for nocacheflag and cmode */ -#define IOMAP_FULL_CACHING 0 -#define IOMAP_NOCACHE_SER 1 -#define IOMAP_NOCACHE_NONSER 2 -#define IOMAP_WRITETHROUGH 3 - -extern void *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag); -extern void __iounmap(void *addr, unsigned long size); - -static inline void *ioremap(unsigned long physaddr, unsigned long size) -{ - return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); -} -static inline void *ioremap_nocache(unsigned long physaddr, unsigned long size) -{ - return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); -} -static inline void *ioremap_writethrough(unsigned long physaddr, unsigned long size) -{ - return __ioremap(physaddr, size, IOMAP_WRITETHROUGH); -} -static inline void *ioremap_fullcache(unsigned long physaddr, unsigned long size) -{ - return __ioremap(physaddr, size, IOMAP_FULL_CACHING); -} - -extern void iounmap(void *addr); - -/* Pages to physical address... */ -#define page_to_phys(page) ((page - mem_map) << PAGE_SHIFT) -#define page_to_bus(page) ((page - mem_map) << PAGE_SHIFT) - -/* - * Macros used for converting between virtual and physical mappings. - */ -#define phys_to_virt(vaddr) ((void *) (vaddr)) -#define virt_to_phys(vaddr) ((unsigned long) (vaddr)) - -#define virt_to_bus virt_to_phys -#define bus_to_virt phys_to_virt - -/* - * Convert a physical pointer to a virtual kernel pointer for /dev/mem - * access - */ -#define xlate_dev_mem_ptr(p) __va(p) - -/* - * Convert a virtual cached pointer to an uncached pointer - */ -#define xlate_dev_kmem_ptr(p) p - -#endif /* __KERNEL__ */ - -#endif /* _M68KNOMMU_IO_H */ diff --git a/arch/m68knommu/include/asm/ioctl.h b/arch/m68knommu/include/asm/ioctl.h deleted file mode 100644 index b279fe06dfe..00000000000 --- a/arch/m68knommu/include/asm/ioctl.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/ioctl.h> diff --git a/arch/m68knommu/include/asm/ioctls.h b/arch/m68knommu/include/asm/ioctls.h deleted file mode 100644 index 0b1eb4d8505..00000000000 --- a/arch/m68knommu/include/asm/ioctls.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/ioctls.h> diff --git a/arch/m68knommu/include/asm/ipcbuf.h b/arch/m68knommu/include/asm/ipcbuf.h deleted file mode 100644 index e4a7be6dd70..00000000000 --- a/arch/m68knommu/include/asm/ipcbuf.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/ipcbuf.h> diff --git a/arch/m68knommu/include/asm/irq.h b/arch/m68knommu/include/asm/irq.h deleted file mode 100644 index 9373c31ac87..00000000000 --- a/arch/m68knommu/include/asm/irq.h +++ /dev/null @@ -1,26 +0,0 @@ -#ifndef _M68KNOMMU_IRQ_H_ -#define _M68KNOMMU_IRQ_H_ - -#ifdef CONFIG_COLDFIRE -/* - * On the ColdFire we keep track of all vectors. That way drivers - * can register whatever vector number they wish, and we can deal - * with it. - */ -#define SYS_IRQS 256 -#define NR_IRQS SYS_IRQS - -#else - -/* - * # of m68k interrupts - */ -#define SYS_IRQS 8 -#define NR_IRQS (24 + SYS_IRQS) - -#endif /* CONFIG_COLDFIRE */ - - -#define irq_canonicalize(irq) (irq) - -#endif /* _M68KNOMMU_IRQ_H_ */ diff --git a/arch/m68knommu/include/asm/irq_regs.h b/arch/m68knommu/include/asm/irq_regs.h deleted file mode 100644 index 3dd9c0b7027..00000000000 --- a/arch/m68knommu/include/asm/irq_regs.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/irq_regs.h> diff --git a/arch/m68knommu/include/asm/kdebug.h b/arch/m68knommu/include/asm/kdebug.h deleted file mode 100644 index 6ece1b03766..00000000000 --- a/arch/m68knommu/include/asm/kdebug.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/kdebug.h> diff --git a/arch/m68knommu/include/asm/kmap_types.h b/arch/m68knommu/include/asm/kmap_types.h deleted file mode 100644 index bfb6707575d..00000000000 --- a/arch/m68knommu/include/asm/kmap_types.h +++ /dev/null @@ -1,21 +0,0 @@ -#ifndef __ASM_M68K_KMAP_TYPES_H -#define __ASM_M68K_KMAP_TYPES_H - -enum km_type { - KM_BOUNCE_READ, - KM_SKB_SUNRPC_DATA, - KM_SKB_DATA_SOFTIRQ, - KM_USER0, - KM_USER1, - KM_BIO_SRC_IRQ, - KM_BIO_DST_IRQ, - KM_PTE0, - KM_PTE1, - KM_IRQ0, - KM_IRQ1, - KM_SOFTIRQ0, - KM_SOFTIRQ1, - KM_TYPE_NR -}; - -#endif diff --git a/arch/m68knommu/include/asm/linkage.h b/arch/m68knommu/include/asm/linkage.h deleted file mode 100644 index c288a19ff48..00000000000 --- a/arch/m68knommu/include/asm/linkage.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/linkage.h> diff --git a/arch/m68knommu/include/asm/local.h b/arch/m68knommu/include/asm/local.h deleted file mode 100644 index 84a39c1b86f..00000000000 --- a/arch/m68knommu/include/asm/local.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __M68KNOMMU_LOCAL_H -#define __M68KNOMMU_LOCAL_H - -#include <asm-generic/local.h> - -#endif /* __M68KNOMMU_LOCAL_H */ diff --git a/arch/m68knommu/include/asm/m5206sim.h b/arch/m68knommu/include/asm/m5206sim.h deleted file mode 100644 index 7e3594dea88..00000000000 --- a/arch/m68knommu/include/asm/m5206sim.h +++ /dev/null @@ -1,131 +0,0 @@ -/****************************************************************************/ - -/* - * m5206sim.h -- ColdFire 5206 System Integration Module support. - * - * (C) Copyright 1999, Greg Ungerer (gerg@snapgear.com) - * (C) Copyright 2000, Lineo Inc. (www.lineo.com) - */ - -/****************************************************************************/ -#ifndef m5206sim_h -#define m5206sim_h -/****************************************************************************/ - - -/* - * Define the 5206 SIM register set addresses. - */ -#define MCFSIM_SIMR 0x03 /* SIM Config reg (r/w) */ -#define MCFSIM_ICR1 0x14 /* Intr Ctrl reg 1 (r/w) */ -#define MCFSIM_ICR2 0x15 /* Intr Ctrl reg 2 (r/w) */ -#define MCFSIM_ICR3 0x16 /* Intr Ctrl reg 3 (r/w) */ -#define MCFSIM_ICR4 0x17 /* Intr Ctrl reg 4 (r/w) */ -#define MCFSIM_ICR5 0x18 /* Intr Ctrl reg 5 (r/w) */ -#define MCFSIM_ICR6 0x19 /* Intr Ctrl reg 6 (r/w) */ -#define MCFSIM_ICR7 0x1a /* Intr Ctrl reg 7 (r/w) */ -#define MCFSIM_ICR8 0x1b /* Intr Ctrl reg 8 (r/w) */ -#define MCFSIM_ICR9 0x1c /* Intr Ctrl reg 9 (r/w) */ -#define MCFSIM_ICR10 0x1d /* Intr Ctrl reg 10 (r/w) */ -#define MCFSIM_ICR11 0x1e /* Intr Ctrl reg 11 (r/w) */ -#define MCFSIM_ICR12 0x1f /* Intr Ctrl reg 12 (r/w) */ -#define MCFSIM_ICR13 0x20 /* Intr Ctrl reg 13 (r/w) */ -#ifdef CONFIG_M5206e -#define MCFSIM_ICR14 0x21 /* Intr Ctrl reg 14 (r/w) */ -#define MCFSIM_ICR15 0x22 /* Intr Ctrl reg 15 (r/w) */ -#endif - -#define MCFSIM_IMR 0x36 /* Interrupt Mask reg (r/w) */ -#define MCFSIM_IPR 0x3a /* Interrupt Pend reg (r/w) */ - -#define MCFSIM_RSR 0x40 /* Reset Status reg (r/w) */ -#define MCFSIM_SYPCR 0x41 /* System Protection reg (r/w)*/ - -#define MCFSIM_SWIVR 0x42 /* SW Watchdog intr reg (r/w) */ -#define MCFSIM_SWSR 0x43 /* SW Watchdog service (r/w) */ - -#define MCFSIM_DCRR 0x46 /* DRAM Refresh reg (r/w) */ -#define MCFSIM_DCTR 0x4a /* DRAM Timing reg (r/w) */ -#define MCFSIM_DAR0 0x4c /* DRAM 0 Address reg(r/w) */ -#define MCFSIM_DMR0 0x50 /* DRAM 0 Mask reg (r/w) */ -#define MCFSIM_DCR0 0x57 /* DRAM 0 Control reg (r/w) */ -#define MCFSIM_DAR1 0x58 /* DRAM 1 Address reg (r/w) */ -#define MCFSIM_DMR1 0x5c /* DRAM 1 Mask reg (r/w) */ -#define MCFSIM_DCR1 0x63 /* DRAM 1 Control reg (r/w) */ - -#define MCFSIM_CSAR0 0x64 /* CS 0 Address 0 reg (r/w) */ -#define MCFSIM_CSMR0 0x68 /* CS 0 Mask 0 reg (r/w) */ -#define MCFSIM_CSCR0 0x6e /* CS 0 Control reg (r/w) */ -#define MCFSIM_CSAR1 0x70 /* CS 1 Address reg (r/w) */ -#define MCFSIM_CSMR1 0x74 /* CS 1 Mask reg (r/w) */ -#define MCFSIM_CSCR1 0x7a /* CS 1 Control reg (r/w) */ -#define MCFSIM_CSAR2 0x7c /* CS 2 Address reg (r/w) */ -#define MCFSIM_CSMR2 0x80 /* CS 2 Mask reg (r/w) */ -#define MCFSIM_CSCR2 0x86 /* CS 2 Control reg (r/w) */ -#define MCFSIM_CSAR3 0x88 /* CS 3 Address reg (r/w) */ -#define MCFSIM_CSMR3 0x8c /* CS 3 Mask reg (r/w) */ -#define MCFSIM_CSCR3 0x92 /* CS 3 Control reg (r/w) */ -#define MCFSIM_CSAR4 0x94 /* CS 4 Address reg (r/w) */ -#define MCFSIM_CSMR4 0x98 /* CS 4 Mask reg (r/w) */ -#define MCFSIM_CSCR4 0x9e /* CS 4 Control reg (r/w) */ -#define MCFSIM_CSAR5 0xa0 /* CS 5 Address reg (r/w) */ -#define MCFSIM_CSMR5 0xa4 /* CS 5 Mask reg (r/w) */ -#define MCFSIM_CSCR5 0xaa /* CS 5 Control reg (r/w) */ -#define MCFSIM_CSAR6 0xac /* CS 6 Address reg (r/w) */ -#define MCFSIM_CSMR6 0xb0 /* CS 6 Mask reg (r/w) */ -#define MCFSIM_CSCR6 0xb6 /* CS 6 Control reg (r/w) */ -#define MCFSIM_CSAR7 0xb8 /* CS 7 Address reg (r/w) */ -#define MCFSIM_CSMR7 0xbc /* CS 7 Mask reg (r/w) */ -#define MCFSIM_CSCR7 0xc2 /* CS 7 Control reg (r/w) */ -#define MCFSIM_DMCR 0xc6 /* Default control */ - -#ifdef CONFIG_M5206e -#define MCFSIM_PAR 0xca /* Pin Assignment reg (r/w) */ -#else -#define MCFSIM_PAR 0xcb /* Pin Assignment reg (r/w) */ -#endif - -#define MCFSIM_PADDR 0x1c5 /* Parallel Direction (r/w) */ -#define MCFSIM_PADAT 0x1c9 /* Parallel Port Value (r/w) */ - -/* - * Some symbol defines for the Parallel Port Pin Assignment Register - */ -#ifdef CONFIG_M5206e -#define MCFSIM_PAR_DREQ0 0x100 /* Set to select DREQ0 input */ - /* Clear to select T0 input */ -#define MCFSIM_PAR_DREQ1 0x200 /* Select DREQ1 input */ - /* Clear to select T0 output */ -#endif - -/* - * Some symbol defines for the Interrupt Control Register - */ -#define MCFSIM_SWDICR MCFSIM_ICR8 /* Watchdog timer ICR */ -#define MCFSIM_TIMER1ICR MCFSIM_ICR9 /* Timer 1 ICR */ -#define MCFSIM_TIMER2ICR MCFSIM_ICR10 /* Timer 2 ICR */ -#define MCFSIM_UART1ICR MCFSIM_ICR12 /* UART 1 ICR */ -#define MCFSIM_UART2ICR MCFSIM_ICR13 /* UART 2 ICR */ -#ifdef CONFIG_M5206e -#define MCFSIM_DMA1ICR MCFSIM_ICR14 /* DMA 1 ICR */ -#define MCFSIM_DMA2ICR MCFSIM_ICR15 /* DMA 2 ICR */ -#endif - -#if defined(CONFIG_M5206e) -#define MCFSIM_IMR_MASKALL 0xfffe /* All SIM intr sources */ -#endif - -/* - * Macro to get and set IMR register. It is 16 bits on the 5206. - */ -#define mcf_getimr() \ - *((volatile unsigned short *) (MCF_MBAR + MCFSIM_IMR)) - -#define mcf_setimr(imr) \ - *((volatile unsigned short *) (MCF_MBAR + MCFSIM_IMR)) = (imr) - -#define mcf_getipr() \ - *((volatile unsigned short *) (MCF_MBAR + MCFSIM_IPR)) - -/****************************************************************************/ -#endif /* m5206sim_h */ diff --git a/arch/m68knommu/include/asm/m520xsim.h b/arch/m68knommu/include/asm/m520xsim.h deleted file mode 100644 index 49d016e6391..00000000000 --- a/arch/m68knommu/include/asm/m520xsim.h +++ /dev/null @@ -1,63 +0,0 @@ -/****************************************************************************/ - -/* - * m520xsim.h -- ColdFire 5207/5208 System Integration Module support. - * - * (C) Copyright 2005, Intec Automation (mike@steroidmicros.com) - */ - -/****************************************************************************/ -#ifndef m520xsim_h -#define m520xsim_h -/****************************************************************************/ - - -/* - * Define the 5282 SIM register set addresses. - */ -#define MCFICM_INTC0 0x48000 /* Base for Interrupt Ctrl 0 */ -#define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */ -#define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */ -#define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */ -#define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */ -#define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */ -#define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */ -#define MCFINTC_ICR0 0x40 /* Base ICR register */ - -#define MCFINT_VECBASE 64 -#define MCFINT_UART0 26 /* Interrupt number for UART0 */ -#define MCFINT_UART1 27 /* Interrupt number for UART1 */ -#define MCFINT_UART2 28 /* Interrupt number for UART2 */ -#define MCFINT_QSPI 31 /* Interrupt number for QSPI */ -#define MCFINT_PIT1 4 /* Interrupt number for PIT1 (PIT0 in processor) */ - -/* - * SDRAM configuration registers. - */ -#define MCFSIM_SDMR 0x000a8000 /* SDRAM Mode/Extended Mode Register */ -#define MCFSIM_SDCR 0x000a8004 /* SDRAM Control Register */ -#define MCFSIM_SDCFG1 0x000a8008 /* SDRAM Configuration Register 1 */ -#define MCFSIM_SDCFG2 0x000a800c /* SDRAM Configuration Register 2 */ -#define MCFSIM_SDCS0 0x000a8110 /* SDRAM Chip Select 0 Configuration */ -#define MCFSIM_SDCS1 0x000a8114 /* SDRAM Chip Select 1 Configuration */ - - -#define MCF_GPIO_PAR_UART (0xA4036) -#define MCF_GPIO_PAR_FECI2C (0xA4033) -#define MCF_GPIO_PAR_FEC (0xA4038) - -#define MCF_GPIO_PAR_UART_PAR_URXD0 (0x0001) -#define MCF_GPIO_PAR_UART_PAR_UTXD0 (0x0002) - -#define MCF_GPIO_PAR_UART_PAR_URXD1 (0x0040) -#define MCF_GPIO_PAR_UART_PAR_UTXD1 (0x0080) - -#define MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2 (0x02) -#define MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 (0x04) - -#define ICR_INTRCONF 0x05 -#define MCFPIT_IMR MCFINTC_IMRL -#define MCFPIT_IMR_IBIT (1 << MCFINT_PIT1) - -/****************************************************************************/ -#endif /* m520xsim_h */ diff --git a/arch/m68knommu/include/asm/m523xsim.h b/arch/m68knommu/include/asm/m523xsim.h deleted file mode 100644 index bf397313e93..00000000000 --- a/arch/m68knommu/include/asm/m523xsim.h +++ /dev/null @@ -1,45 +0,0 @@ -/****************************************************************************/ - -/* - * m523xsim.h -- ColdFire 523x System Integration Module support. - * - * (C) Copyright 2003-2005, Greg Ungerer <gerg@snapgear.com> - */ - -/****************************************************************************/ -#ifndef m523xsim_h -#define m523xsim_h -/****************************************************************************/ - - -/* - * Define the 523x SIM register set addresses. - */ -#define MCFICM_INTC0 0x0c00 /* Base for Interrupt Ctrl 0 */ -#define MCFICM_INTC1 0x0d00 /* Base for Interrupt Ctrl 0 */ -#define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */ -#define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */ -#define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */ -#define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */ -#define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */ -#define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */ -#define MCFINTC_IRLR 0x18 /* */ -#define MCFINTC_IACKL 0x19 /* */ -#define MCFINTC_ICR0 0x40 /* Base ICR register */ - -#define MCFINT_VECBASE 64 /* Vector base number */ -#define MCFINT_UART0 13 /* Interrupt number for UART0 */ -#define MCFINT_PIT1 36 /* Interrupt number for PIT1 */ -#define MCFINT_QSPI 18 /* Interrupt number for QSPI */ - -/* - * SDRAM configuration registers. - */ -#define MCFSIM_DCR 0x44 /* SDRAM control */ -#define MCFSIM_DACR0 0x48 /* SDRAM base address 0 */ -#define MCFSIM_DMR0 0x4c /* SDRAM address mask 0 */ -#define MCFSIM_DACR1 0x50 /* SDRAM base address 1 */ -#define MCFSIM_DMR1 0x54 /* SDRAM address mask 1 */ - -/****************************************************************************/ -#endif /* m523xsim_h */ diff --git a/arch/m68knommu/include/asm/m5249sim.h b/arch/m68knommu/include/asm/m5249sim.h deleted file mode 100644 index 366eb8602d2..00000000000 --- a/arch/m68knommu/include/asm/m5249sim.h +++ /dev/null @@ -1,209 +0,0 @@ -/****************************************************************************/ - -/* - * m5249sim.h -- ColdFire 5249 System Integration Module support. - * - * (C) Copyright 2002, Greg Ungerer (gerg@snapgear.com) - */ - -/****************************************************************************/ -#ifndef m5249sim_h -#define m5249sim_h -/****************************************************************************/ - -/* - * Define the 5249 SIM register set addresses. - */ -#define MCFSIM_RSR 0x00 /* Reset Status reg (r/w) */ -#define MCFSIM_SYPCR 0x01 /* System Protection reg (r/w)*/ -#define MCFSIM_SWIVR 0x02 /* SW Watchdog intr reg (r/w) */ -#define MCFSIM_SWSR 0x03 /* SW Watchdog service (r/w) */ -#define MCFSIM_PAR 0x04 /* Pin Assignment reg (r/w) */ -#define MCFSIM_IRQPAR 0x06 /* Interrupt Assignment reg (r/w) */ -#define MCFSIM_MPARK 0x0C /* BUS Master Control Reg*/ -#define MCFSIM_IPR 0x40 /* Interrupt Pend reg (r/w) */ -#define MCFSIM_IMR 0x44 /* Interrupt Mask reg (r/w) */ -#define MCFSIM_AVR 0x4b /* Autovector Ctrl reg (r/w) */ -#define MCFSIM_ICR0 0x4c /* Intr Ctrl reg 0 (r/w) */ -#define MCFSIM_ICR1 0x4d /* Intr Ctrl reg 1 (r/w) */ -#define MCFSIM_ICR2 0x4e /* Intr Ctrl reg 2 (r/w) */ -#define MCFSIM_ICR3 0x4f /* Intr Ctrl reg 3 (r/w) */ -#define MCFSIM_ICR4 0x50 /* Intr Ctrl reg 4 (r/w) */ -#define MCFSIM_ICR5 0x51 /* Intr Ctrl reg 5 (r/w) */ -#define MCFSIM_ICR6 0x52 /* Intr Ctrl reg 6 (r/w) */ -#define MCFSIM_ICR7 0x53 /* Intr Ctrl reg 7 (r/w) */ -#define MCFSIM_ICR8 0x54 /* Intr Ctrl reg 8 (r/w) */ -#define MCFSIM_ICR9 0x55 /* Intr Ctrl reg 9 (r/w) */ -#define MCFSIM_ICR10 0x56 /* Intr Ctrl reg 10 (r/w) */ -#define MCFSIM_ICR11 0x57 /* Intr Ctrl reg 11 (r/w) */ - -#define MCFSIM_CSAR0 0x80 /* CS 0 Address 0 reg (r/w) */ -#define MCFSIM_CSMR0 0x84 /* CS 0 Mask 0 reg (r/w) */ -#define MCFSIM_CSCR0 0x8a /* CS 0 Control reg (r/w) */ -#define MCFSIM_CSAR1 0x8c /* CS 1 Address reg (r/w) */ -#define MCFSIM_CSMR1 0x90 /* CS 1 Mask reg (r/w) */ -#define MCFSIM_CSCR1 0x96 /* CS 1 Control reg (r/w) */ -#define MCFSIM_CSAR2 0x98 /* CS 2 Address reg (r/w) */ -#define MCFSIM_CSMR2 0x9c /* CS 2 Mask reg (r/w) */ -#define MCFSIM_CSCR2 0xa2 /* CS 2 Control reg (r/w) */ -#define MCFSIM_CSAR3 0xa4 /* CS 3 Address reg (r/w) */ -#define MCFSIM_CSMR3 0xa8 /* CS 3 Mask reg (r/w) */ -#define MCFSIM_CSCR3 0xae /* CS 3 Control reg (r/w) */ - -#define MCFSIM_DCR 0x100 /* DRAM Control reg (r/w) */ -#define MCFSIM_DACR0 0x108 /* DRAM 0 Addr and Ctrl (r/w) */ -#define MCFSIM_DMR0 0x10c /* DRAM 0 Mask reg (r/w) */ -#define MCFSIM_DACR1 0x110 /* DRAM 1 Addr and Ctrl (r/w) */ -#define MCFSIM_DMR1 0x114 /* DRAM 1 Mask reg (r/w) */ - - -/* - * Some symbol defines for the above... - */ -#define MCFSIM_SWDICR MCFSIM_ICR0 /* Watchdog timer ICR */ -#define MCFSIM_TIMER1ICR MCFSIM_ICR1 /* Timer 1 ICR */ -#define MCFSIM_TIMER2ICR MCFSIM_ICR2 /* Timer 2 ICR */ -#define MCFSIM_UART1ICR MCFSIM_ICR4 /* UART 1 ICR */ -#define MCFSIM_UART2ICR MCFSIM_ICR5 /* UART 2 ICR */ -#define MCFSIM_DMA0ICR MCFSIM_ICR6 /* DMA 0 ICR */ -#define MCFSIM_DMA1ICR MCFSIM_ICR7 /* DMA 1 ICR */ -#define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */ -#define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */ - -/* - * General purpose IO registers (in MBAR2). - */ -#define MCFSIM2_GPIOREAD 0x0 /* GPIO read values */ -#define MCFSIM2_GPIOWRITE 0x4 /* GPIO write values */ -#define MCFSIM2_GPIOENABLE 0x8 /* GPIO enabled */ -#define MCFSIM2_GPIOFUNC 0xc /* GPIO function */ -#define MCFSIM2_GPIO1READ 0xb0 /* GPIO1 read values */ -#define MCFSIM2_GPIO1WRITE 0xb4 /* GPIO1 write values */ -#define MCFSIM2_GPIO1ENABLE 0xb8 /* GPIO1 enabled */ -#define MCFSIM2_GPIO1FUNC 0xbc /* GPIO1 function */ - -#define MCFSIM2_GPIOINTSTAT 0xc0 /* GPIO interrupt status */ -#define MCFSIM2_GPIOINTCLEAR 0xc0 /* GPIO interrupt clear */ -#define MCFSIM2_GPIOINTENABLE 0xc4 /* GPIO interrupt enable */ - -#define MCFSIM2_INTLEVEL1 0x140 /* Interrupt level reg 1 */ -#define MCFSIM2_INTLEVEL2 0x144 /* Interrupt level reg 2 */ -#define MCFSIM2_INTLEVEL3 0x148 /* Interrupt level reg 3 */ -#define MCFSIM2_INTLEVEL4 0x14c /* Interrupt level reg 4 */ -#define MCFSIM2_INTLEVEL5 0x150 /* Interrupt level reg 5 */ -#define MCFSIM2_INTLEVEL6 0x154 /* Interrupt level reg 6 */ -#define MCFSIM2_INTLEVEL7 0x158 /* Interrupt level reg 7 */ -#define MCFSIM2_INTLEVEL8 0x15c /* Interrupt level reg 8 */ - -#define MCFSIM2_DMAROUTE 0x188 /* DMA routing */ - -#define MCFSIM2_IDECONFIG1 0x18c /* IDEconfig1 */ -#define MCFSIM2_IDECONFIG2 0x190 /* IDEconfig2 */ - - -/* - * Macro to set IMR register. It is 32 bits on the 5249. - */ -#define MCFSIM_IMR_MASKALL 0x7fffe /* All SIM intr sources */ - -#define mcf_getimr() \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) - -#define mcf_setimr(imr) \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr); - -#define mcf_getipr() \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR)) - -/****************************************************************************/ - -#ifdef __ASSEMBLER__ - -/* - * The M5249C3 board needs a little help getting all its SIM devices - * initialized at kernel start time. dBUG doesn't set much up, so - * we need to do it manually. - */ -.macro m5249c3_setup - /* - * Set MBAR1 and MBAR2, just incase they are not set. - */ - movel #0x10000001,%a0 - movec %a0,%MBAR /* map MBAR region */ - subql #1,%a0 /* get MBAR address in a0 */ - - movel #0x80000001,%a1 - movec %a1,#3086 /* map MBAR2 region */ - subql #1,%a1 /* get MBAR2 address in a1 */ - - /* - * Move secondary interrupts to base at 128. - */ - moveb #0x80,%d0 - moveb %d0,0x16b(%a1) /* interrupt base register */ - - /* - * Work around broken CSMR0/DRAM vector problem. - */ - movel #0x001F0021,%d0 /* disable C/I bit */ - movel %d0,0x84(%a0) /* set CSMR0 */ - - /* - * Disable the PLL firstly. (Who knows what state it is - * in here!). - */ - movel 0x180(%a1),%d0 /* get current PLL value */ - andl #0xfffffffe,%d0 /* PLL bypass first */ - movel %d0,0x180(%a1) /* set PLL register */ - nop - -#if CONFIG_CLOCK_FREQ == 140000000 - /* - * Set initial clock frequency. This assumes M5249C3 board - * is fitted with 11.2896MHz crystal. It will program the - * PLL for 140MHz. Lets go fast :-) - */ - movel #0x125a40f0,%d0 /* set for 140MHz */ - movel %d0,0x180(%a1) /* set PLL register */ - orl #0x1,%d0 - movel %d0,0x180(%a1) /* set PLL register */ -#endif - - /* - * Setup CS1 for ethernet controller. - * (Setup as per M5249C3 doco). - */ - movel #0xe0000000,%d0 /* CS1 mapped at 0xe0000000 */ - movel %d0,0x8c(%a0) - movel #0x001f0021,%d0 /* CS1 size of 1Mb */ - movel %d0,0x90(%a0) - movew #0x0080,%d0 /* CS1 = 16bit port, AA */ - movew %d0,0x96(%a0) - - /* - * Setup CS2 for IDE interface. - */ - movel #0x50000000,%d0 /* CS2 mapped at 0x50000000 */ - movel %d0,0x98(%a0) - movel #0x001f0001,%d0 /* CS2 size of 1MB */ - movel %d0,0x9c(%a0) - movew #0x0080,%d0 /* CS2 = 16bit, TA */ - movew %d0,0xa2(%a0) - - movel #0x00107000,%d0 /* IDEconfig1 */ - movel %d0,0x18c(%a1) - movel #0x000c0400,%d0 /* IDEconfig2 */ - movel %d0,0x190(%a1) - - movel #0x00080000,%d0 /* GPIO19, IDE reset bit */ - orl %d0,0xc(%a1) /* function GPIO19 */ - orl %d0,0x8(%a1) /* enable GPIO19 as output */ - orl %d0,0x4(%a1) /* de-assert IDE reset */ -.endm - -#define PLATFORM_SETUP m5249c3_setup - -#endif /* __ASSEMBLER__ */ - -/****************************************************************************/ -#endif /* m5249sim_h */ diff --git a/arch/m68knommu/include/asm/m5272sim.h b/arch/m68knommu/include/asm/m5272sim.h deleted file mode 100644 index 6217edc2113..00000000000 --- a/arch/m68knommu/include/asm/m5272sim.h +++ /dev/null @@ -1,78 +0,0 @@ -/****************************************************************************/ - -/* - * m5272sim.h -- ColdFire 5272 System Integration Module support. - * - * (C) Copyright 1999, Greg Ungerer (gerg@snapgear.com) - * (C) Copyright 2000, Lineo Inc. (www.lineo.com) - */ - -/****************************************************************************/ -#ifndef m5272sim_h -#define m5272sim_h -/****************************************************************************/ - - -/* - * Define the 5272 SIM register set addresses. - */ -#define MCFSIM_SCR 0x04 /* SIM Config reg (r/w) */ -#define MCFSIM_SPR 0x06 /* System Protection reg (r/w)*/ -#define MCFSIM_PMR 0x08 /* Power Management reg (r/w) */ -#define MCFSIM_APMR 0x0e /* Active Low Power reg (r/w) */ -#define MCFSIM_DIR 0x10 /* Device Identity reg (r/w) */ - -#define MCFSIM_ICR1 0x20 /* Intr Ctrl reg 1 (r/w) */ -#define MCFSIM_ICR2 0x24 /* Intr Ctrl reg 2 (r/w) */ -#define MCFSIM_ICR3 0x28 /* Intr Ctrl reg 3 (r/w) */ -#define MCFSIM_ICR4 0x2c /* Intr Ctrl reg 4 (r/w) */ - -#define MCFSIM_ISR 0x30 /* Interrupt Source reg (r/w) */ -#define MCFSIM_PITR 0x34 /* Interrupt Transition (r/w) */ -#define MCFSIM_PIWR 0x38 /* Interrupt Wakeup reg (r/w) */ -#define MCFSIM_PIVR 0x3f /* Interrupt Vector reg (r/w( */ - -#define MCFSIM_WRRR 0x280 /* Watchdog reference (r/w) */ -#define MCFSIM_WIRR 0x284 /* Watchdog interrupt (r/w) */ -#define MCFSIM_WCR 0x288 /* Watchdog counter (r/w) */ -#define MCFSIM_WER 0x28c /* Watchdog event (r/w) */ - -#define MCFSIM_CSBR0 0x40 /* CS0 Base Address (r/w) */ -#define MCFSIM_CSOR0 0x44 /* CS0 Option (r/w) */ -#define MCFSIM_CSBR1 0x48 /* CS1 Base Address (r/w) */ -#define MCFSIM_CSOR1 0x4c /* CS1 Option (r/w) */ -#define MCFSIM_CSBR2 0x50 /* CS2 Base Address (r/w) */ -#define MCFSIM_CSOR2 0x54 /* CS2 Option (r/w) */ -#define MCFSIM_CSBR3 0x58 /* CS3 Base Address (r/w) */ -#define MCFSIM_CSOR3 0x5c /* CS3 Option (r/w) */ -#define MCFSIM_CSBR4 0x60 /* CS4 Base Address (r/w) */ -#define MCFSIM_CSOR4 0x64 /* CS4 Option (r/w) */ -#define MCFSIM_CSBR5 0x68 /* CS5 Base Address (r/w) */ -#define MCFSIM_CSOR5 0x6c /* CS5 Option (r/w) */ -#define MCFSIM_CSBR6 0x70 /* CS6 Base Address (r/w) */ -#define MCFSIM_CSOR6 0x74 /* CS6 Option (r/w) */ -#define MCFSIM_CSBR7 0x78 /* CS7 Base Address (r/w) */ -#define MCFSIM_CSOR7 0x7c /* CS7 Option (r/w) */ - -#define MCFSIM_SDCR 0x180 /* SDRAM Configuration (r/w) */ -#define MCFSIM_SDTR 0x184 /* SDRAM Timing (r/w) */ -#define MCFSIM_DCAR0 0x4c /* DRAM 0 Address reg(r/w) */ -#define MCFSIM_DCMR0 0x50 /* DRAM 0 Mask reg (r/w) */ -#define MCFSIM_DCCR0 0x57 /* DRAM 0 Control reg (r/w) */ -#define MCFSIM_DCAR1 0x58 /* DRAM 1 Address reg (r/w) */ -#define MCFSIM_DCMR1 0x5c /* DRAM 1 Mask reg (r/w) */ -#define MCFSIM_DCCR1 0x63 /* DRAM 1 Control reg (r/w) */ - -#define MCFSIM_PACNT 0x80 /* Port A Control (r/w) */ -#define MCFSIM_PADDR 0x84 /* Port A Direction (r/w) */ -#define MCFSIM_PADAT 0x86 /* Port A Data (r/w) */ -#define MCFSIM_PBCNT 0x88 /* Port B Control (r/w) */ -#define MCFSIM_PBDDR 0x8c /* Port B Direction (r/w) */ -#define MCFSIM_PBDAT 0x8e /* Port B Data (r/w) */ -#define MCFSIM_PCDDR 0x94 /* Port C Direction (r/w) */ -#define MCFSIM_PCDAT 0x96 /* Port C Data (r/w) */ -#define MCFSIM_PDCNT 0x98 /* Port D Control (r/w) */ - - -/****************************************************************************/ -#endif /* m5272sim_h */ diff --git a/arch/m68knommu/include/asm/m527xsim.h b/arch/m68knommu/include/asm/m527xsim.h deleted file mode 100644 index 1f63ab3fb3e..00000000000 --- a/arch/m68knommu/include/asm/m527xsim.h +++ /dev/null @@ -1,74 +0,0 @@ -/****************************************************************************/ - -/* - * m527xsim.h -- ColdFire 5270/5271 System Integration Module support. - * - * (C) Copyright 2004, Greg Ungerer (gerg@snapgear.com) - */ - -/****************************************************************************/ -#ifndef m527xsim_h -#define m527xsim_h -/****************************************************************************/ - - -/* - * Define the 5270/5271 SIM register set addresses. - */ -#define MCFICM_INTC0 0x0c00 /* Base for Interrupt Ctrl 0 */ -#define MCFICM_INTC1 0x0d00 /* Base for Interrupt Ctrl 1 */ -#define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */ -#define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */ -#define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */ -#define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */ -#define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */ -#define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */ -#define MCFINTC_IRLR 0x18 /* */ -#define MCFINTC_IACKL 0x19 /* */ -#define MCFINTC_ICR0 0x40 /* Base ICR register */ - -#define MCFINT_VECBASE 64 /* Vector base number */ -#define MCFINT_UART0 13 /* Interrupt number for UART0 */ -#define MCFINT_UART1 14 /* Interrupt number for UART1 */ -#define MCFINT_UART2 15 /* Interrupt number for UART2 */ -#define MCFINT_PIT1 36 /* Interrupt number for PIT1 */ - -/* - * SDRAM configuration registers. - */ -#ifdef CONFIG_M5271 -#define MCFSIM_DCR 0x40 /* SDRAM control */ -#define MCFSIM_DACR0 0x48 /* SDRAM base address 0 */ -#define MCFSIM_DMR0 0x4c /* SDRAM address mask 0 */ -#define MCFSIM_DACR1 0x50 /* SDRAM base address 1 */ -#define MCFSIM_DMR1 0x54 /* SDRAM address mask 1 */ -#endif -#ifdef CONFIG_M5275 -#define MCFSIM_DMR 0x40 /* SDRAM mode */ -#define MCFSIM_DCR 0x44 /* SDRAM control */ -#define MCFSIM_DCFG1 0x48 /* SDRAM configuration 1 */ -#define MCFSIM_DCFG2 0x4c /* SDRAM configuration 2 */ -#define MCFSIM_DBAR0 0x50 /* SDRAM base address 0 */ -#define MCFSIM_DMR0 0x54 /* SDRAM address mask 0 */ -#define MCFSIM_DBAR1 0x58 /* SDRAM base address 1 */ -#define MCFSIM_DMR1 0x5c /* SDRAM address mask 1 */ -#endif - -/* - * GPIO pins setups to enable the UARTs. - */ -#ifdef CONFIG_M5271 -#define MCF_GPIO_PAR_UART 0x100048 /* PAR UART address */ -#define UART0_ENABLE_MASK 0x000f -#define UART1_ENABLE_MASK 0x0ff0 -#define UART2_ENABLE_MASK 0x3000 -#endif -#ifdef CONFIG_M5275 -#define MCF_GPIO_PAR_UART 0x10007c /* PAR UART address */ -#define UART0_ENABLE_MASK 0x000f -#define UART1_ENABLE_MASK 0x00f0 -#define UART2_ENABLE_MASK 0x3f00 -#endif - -/****************************************************************************/ -#endif /* m527xsim_h */ diff --git a/arch/m68knommu/include/asm/m528xsim.h b/arch/m68knommu/include/asm/m528xsim.h deleted file mode 100644 index 28bf783a5d6..00000000000 --- a/arch/m68knommu/include/asm/m528xsim.h +++ /dev/null @@ -1,159 +0,0 @@ -/****************************************************************************/ - -/* - * m528xsim.h -- ColdFire 5280/5282 System Integration Module support. - * - * (C) Copyright 2003, Greg Ungerer (gerg@snapgear.com) - */ - -/****************************************************************************/ -#ifndef m528xsim_h -#define m528xsim_h -/****************************************************************************/ - - -/* - * Define the 5280/5282 SIM register set addresses. - */ -#define MCFICM_INTC0 0x0c00 /* Base for Interrupt Ctrl 0 */ -#define MCFICM_INTC1 0x0d00 /* Base for Interrupt Ctrl 0 */ -#define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */ -#define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */ -#define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */ -#define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */ -#define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */ -#define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */ -#define MCFINTC_IRLR 0x18 /* */ -#define MCFINTC_IACKL 0x19 /* */ -#define MCFINTC_ICR0 0x40 /* Base ICR register */ - -#define MCFINT_VECBASE 64 /* Vector base number */ -#define MCFINT_UART0 13 /* Interrupt number for UART0 */ -#define MCFINT_PIT1 55 /* Interrupt number for PIT1 */ - -/* - * SDRAM configuration registers. - */ -#define MCFSIM_DCR 0x44 /* SDRAM control */ -#define MCFSIM_DACR0 0x48 /* SDRAM base address 0 */ -#define MCFSIM_DMR0 0x4c /* SDRAM address mask 0 */ -#define MCFSIM_DACR1 0x50 /* SDRAM base address 1 */ -#define MCFSIM_DMR1 0x54 /* SDRAM address mask 1 */ - -/* - * Derek Cheung - 6 Feb 2005 - * add I2C and QSPI register definition using Freescale's MCF5282 - */ -/* set Port AS pin for I2C or UART */ -#define MCF5282_GPIO_PASPAR (volatile u16 *) (MCF_IPSBAR + 0x00100056) - -/* Port UA Pin Assignment Register (8 Bit) */ -#define MCF5282_GPIO_PUAPAR 0x10005C - -/* Interrupt Mask Register Register Low */ -#define MCF5282_INTC0_IMRL (volatile u32 *) (MCF_IPSBAR + 0x0C0C) -/* Interrupt Control Register 7 */ -#define MCF5282_INTC0_ICR17 (volatile u8 *) (MCF_IPSBAR + 0x0C51) - - - -/********************************************************************* -* -* Inter-IC (I2C) Module -* -*********************************************************************/ -/* Read/Write access macros for general use */ -#define MCF5282_I2C_I2ADR (volatile u8 *) (MCF_IPSBAR + 0x0300) // Address -#define MCF5282_I2C_I2FDR (volatile u8 *) (MCF_IPSBAR + 0x0304) // Freq Divider -#define MCF5282_I2C_I2CR (volatile u8 *) (MCF_IPSBAR + 0x0308) // Control -#define MCF5282_I2C_I2SR (volatile u8 *) (MCF_IPSBAR + 0x030C) // Status -#define MCF5282_I2C_I2DR (volatile u8 *) (MCF_IPSBAR + 0x0310) // Data I/O - -/* Bit level definitions and macros */ -#define MCF5282_I2C_I2ADR_ADDR(x) (((x)&0x7F)<<0x01) - -#define MCF5282_I2C_I2FDR_IC(x) (((x)&0x3F)) - -#define MCF5282_I2C_I2CR_IEN (0x80) // I2C enable -#define MCF5282_I2C_I2CR_IIEN (0x40) // interrupt enable -#define MCF5282_I2C_I2CR_MSTA (0x20) // master/slave mode -#define MCF5282_I2C_I2CR_MTX (0x10) // transmit/receive mode -#define MCF5282_I2C_I2CR_TXAK (0x08) // transmit acknowledge enable -#define MCF5282_I2C_I2CR_RSTA (0x04) // repeat start - -#define MCF5282_I2C_I2SR_ICF (0x80) // data transfer bit -#define MCF5282_I2C_I2SR_IAAS (0x40) // I2C addressed as a slave -#define MCF5282_I2C_I2SR_IBB (0x20) // I2C bus busy -#define MCF5282_I2C_I2SR_IAL (0x10) // aribitration lost -#define MCF5282_I2C_I2SR_SRW (0x04) // slave read/write -#define MCF5282_I2C_I2SR_IIF (0x02) // I2C interrupt -#define MCF5282_I2C_I2SR_RXAK (0x01) // received acknowledge - - - -/********************************************************************* -* -* Queued Serial Peripheral Interface (QSPI) Module -* -*********************************************************************/ -/* Derek - 21 Feb 2005 */ -/* change to the format used in I2C */ -/* Read/Write access macros for general use */ -#define MCF5282_QSPI_QMR MCF_IPSBAR + 0x0340 -#define MCF5282_QSPI_QDLYR MCF_IPSBAR + 0x0344 -#define MCF5282_QSPI_QWR MCF_IPSBAR + 0x0348 -#define MCF5282_QSPI_QIR MCF_IPSBAR + 0x034C -#define MCF5282_QSPI_QAR MCF_IPSBAR + 0x0350 -#define MCF5282_QSPI_QDR MCF_IPSBAR + 0x0354 -#define MCF5282_QSPI_QCR MCF_IPSBAR + 0x0354 - -/* Bit level definitions and macros */ -#define MCF5282_QSPI_QMR_MSTR (0x8000) -#define MCF5282_QSPI_QMR_DOHIE (0x4000) -#define MCF5282_QSPI_QMR_BITS_16 (0x0000) -#define MCF5282_QSPI_QMR_BITS_8 (0x2000) -#define MCF5282_QSPI_QMR_BITS_9 (0x2400) -#define MCF5282_QSPI_QMR_BITS_10 (0x2800) -#define MCF5282_QSPI_QMR_BITS_11 (0x2C00) -#define MCF5282_QSPI_QMR_BITS_12 (0x3000) -#define MCF5282_QSPI_QMR_BITS_13 (0x3400) -#define MCF5282_QSPI_QMR_BITS_14 (0x3800) -#define MCF5282_QSPI_QMR_BITS_15 (0x3C00) -#define MCF5282_QSPI_QMR_CPOL (0x0200) -#define MCF5282_QSPI_QMR_CPHA (0x0100) -#define MCF5282_QSPI_QMR_BAUD(x) (((x)&0x00FF)) - -#define MCF5282_QSPI_QDLYR_SPE (0x80) -#define MCF5282_QSPI_QDLYR_QCD(x) (((x)&0x007F)<<8) -#define MCF5282_QSPI_QDLYR_DTL(x) (((x)&0x00FF)) - -#define MCF5282_QSPI_QWR_HALT (0x8000) -#define MCF5282_QSPI_QWR_WREN (0x4000) -#define MCF5282_QSPI_QWR_WRTO (0x2000) -#define MCF5282_QSPI_QWR_CSIV (0x1000) -#define MCF5282_QSPI_QWR_ENDQP(x) (((x)&0x000F)<<8) -#define MCF5282_QSPI_QWR_CPTQP(x) (((x)&0x000F)<<4) -#define MCF5282_QSPI_QWR_NEWQP(x) (((x)&0x000F)) - -#define MCF5282_QSPI_QIR_WCEFB (0x8000) -#define MCF5282_QSPI_QIR_ABRTB (0x4000) -#define MCF5282_QSPI_QIR_ABRTL (0x1000) -#define MCF5282_QSPI_QIR_WCEFE (0x0800) -#define MCF5282_QSPI_QIR_ABRTE (0x0400) -#define MCF5282_QSPI_QIR_SPIFE (0x0100) -#define MCF5282_QSPI_QIR_WCEF (0x0008) -#define MCF5282_QSPI_QIR_ABRT (0x0004) -#define MCF5282_QSPI_QIR_SPIF (0x0001) - -#define MCF5282_QSPI_QAR_ADDR(x) (((x)&0x003F)) - -#define MCF5282_QSPI_QDR_COMMAND(x) (((x)&0xFF00)) -#define MCF5282_QSPI_QCR_DATA(x) (((x)&0x00FF)<<8) -#define MCF5282_QSPI_QCR_CONT (0x8000) -#define MCF5282_QSPI_QCR_BITSE (0x4000) -#define MCF5282_QSPI_QCR_DT (0x2000) -#define MCF5282_QSPI_QCR_DSCK (0x1000) -#define MCF5282_QSPI_QCR_CS (((x)&0x000F)<<8) - -/****************************************************************************/ -#endif /* m528xsim_h */ diff --git a/arch/m68knommu/include/asm/m5307sim.h b/arch/m68knommu/include/asm/m5307sim.h deleted file mode 100644 index 5886728409c..00000000000 --- a/arch/m68knommu/include/asm/m5307sim.h +++ /dev/null @@ -1,181 +0,0 @@ -/****************************************************************************/ - -/* - * m5307sim.h -- ColdFire 5307 System Integration Module support. - * - * (C) Copyright 1999, Moreton Bay Ventures Pty Ltd. - * (C) Copyright 1999, Lineo (www.lineo.com) - * - * Modified by David W. Miller for the MCF5307 Eval Board. - */ - -/****************************************************************************/ -#ifndef m5307sim_h -#define m5307sim_h -/****************************************************************************/ - -/* - * Define the 5307 SIM register set addresses. - */ -#define MCFSIM_RSR 0x00 /* Reset Status reg (r/w) */ -#define MCFSIM_SYPCR 0x01 /* System Protection reg (r/w)*/ -#define MCFSIM_SWIVR 0x02 /* SW Watchdog intr reg (r/w) */ -#define MCFSIM_SWSR 0x03 /* SW Watchdog service (r/w) */ -#define MCFSIM_PAR 0x04 /* Pin Assignment reg (r/w) */ -#define MCFSIM_IRQPAR 0x06 /* Interrupt Assignment reg (r/w) */ -#define MCFSIM_PLLCR 0x08 /* PLL Controll Reg*/ -#define MCFSIM_MPARK 0x0C /* BUS Master Control Reg*/ -#define MCFSIM_IPR 0x40 /* Interrupt Pend reg (r/w) */ -#define MCFSIM_IMR 0x44 /* Interrupt Mask reg (r/w) */ -#define MCFSIM_AVR 0x4b /* Autovector Ctrl reg (r/w) */ -#define MCFSIM_ICR0 0x4c /* Intr Ctrl reg 0 (r/w) */ -#define MCFSIM_ICR1 0x4d /* Intr Ctrl reg 1 (r/w) */ -#define MCFSIM_ICR2 0x4e /* Intr Ctrl reg 2 (r/w) */ -#define MCFSIM_ICR3 0x4f /* Intr Ctrl reg 3 (r/w) */ -#define MCFSIM_ICR4 0x50 /* Intr Ctrl reg 4 (r/w) */ -#define MCFSIM_ICR5 0x51 /* Intr Ctrl reg 5 (r/w) */ -#define MCFSIM_ICR6 0x52 /* Intr Ctrl reg 6 (r/w) */ -#define MCFSIM_ICR7 0x53 /* Intr Ctrl reg 7 (r/w) */ -#define MCFSIM_ICR8 0x54 /* Intr Ctrl reg 8 (r/w) */ -#define MCFSIM_ICR9 0x55 /* Intr Ctrl reg 9 (r/w) */ -#define MCFSIM_ICR10 0x56 /* Intr Ctrl reg 10 (r/w) */ -#define MCFSIM_ICR11 0x57 /* Intr Ctrl reg 11 (r/w) */ - -#define MCFSIM_CSAR0 0x80 /* CS 0 Address 0 reg (r/w) */ -#define MCFSIM_CSMR0 0x84 /* CS 0 Mask 0 reg (r/w) */ -#define MCFSIM_CSCR0 0x8a /* CS 0 Control reg (r/w) */ -#define MCFSIM_CSAR1 0x8c /* CS 1 Address reg (r/w) */ -#define MCFSIM_CSMR1 0x90 /* CS 1 Mask reg (r/w) */ -#define MCFSIM_CSCR1 0x96 /* CS 1 Control reg (r/w) */ - -#ifdef CONFIG_OLDMASK -#define MCFSIM_CSBAR 0x98 /* CS Base Address reg (r/w) */ -#define MCFSIM_CSBAMR 0x9c /* CS Base Mask reg (r/w) */ -#define MCFSIM_CSMR2 0x9e /* CS 2 Mask reg (r/w) */ -#define MCFSIM_CSCR2 0xa2 /* CS 2 Control reg (r/w) */ -#define MCFSIM_CSMR3 0xaa /* CS 3 Mask reg (r/w) */ -#define MCFSIM_CSCR3 0xae /* CS 3 Control reg (r/w) */ -#define MCFSIM_CSMR4 0xb6 /* CS 4 Mask reg (r/w) */ -#define MCFSIM_CSCR4 0xba /* CS 4 Control reg (r/w) */ -#define MCFSIM_CSMR5 0xc2 /* CS 5 Mask reg (r/w) */ -#define MCFSIM_CSCR5 0xc6 /* CS 5 Control reg (r/w) */ -#define MCFSIM_CSMR6 0xce /* CS 6 Mask reg (r/w) */ -#define MCFSIM_CSCR6 0xd2 /* CS 6 Control reg (r/w) */ -#define MCFSIM_CSMR7 0xda /* CS 7 Mask reg (r/w) */ -#define MCFSIM_CSCR7 0xde /* CS 7 Control reg (r/w) */ -#else -#define MCFSIM_CSAR2 0x98 /* CS 2 Address reg (r/w) */ -#define MCFSIM_CSMR2 0x9c /* CS 2 Mask reg (r/w) */ -#define MCFSIM_CSCR2 0xa2 /* CS 2 Control reg (r/w) */ -#define MCFSIM_CSAR3 0xa4 /* CS 3 Address reg (r/w) */ -#define MCFSIM_CSMR3 0xa8 /* CS 3 Mask reg (r/w) */ -#define MCFSIM_CSCR3 0xae /* CS 3 Control reg (r/w) */ -#define MCFSIM_CSAR4 0xb0 /* CS 4 Address reg (r/w) */ -#define MCFSIM_CSMR4 0xb4 /* CS 4 Mask reg (r/w) */ -#define MCFSIM_CSCR4 0xba /* CS 4 Control reg (r/w) */ -#define MCFSIM_CSAR5 0xbc /* CS 5 Address reg (r/w) */ -#define MCFSIM_CSMR5 0xc0 /* CS 5 Mask reg (r/w) */ -#define MCFSIM_CSCR5 0xc6 /* CS 5 Control reg (r/w) */ -#define MCFSIM_CSAR6 0xc8 /* CS 6 Address reg (r/w) */ -#define MCFSIM_CSMR6 0xcc /* CS 6 Mask reg (r/w) */ -#define MCFSIM_CSCR6 0xd2 /* CS 6 Control reg (r/w) */ -#define MCFSIM_CSAR7 0xd4 /* CS 7 Address reg (r/w) */ -#define MCFSIM_CSMR7 0xd8 /* CS 7 Mask reg (r/w) */ -#define MCFSIM_CSCR7 0xde /* CS 7 Control reg (r/w) */ -#endif /* CONFIG_OLDMASK */ - -#define MCFSIM_DCR 0x100 /* DRAM Control reg (r/w) */ -#define MCFSIM_DACR0 0x108 /* DRAM 0 Addr and Ctrl (r/w) */ -#define MCFSIM_DMR0 0x10c /* DRAM 0 Mask reg (r/w) */ -#define MCFSIM_DACR1 0x110 /* DRAM 1 Addr and Ctrl (r/w) */ -#define MCFSIM_DMR1 0x114 /* DRAM 1 Mask reg (r/w) */ - -#define MCFSIM_PADDR 0x244 /* Parallel Direction (r/w) */ -#define MCFSIM_PADAT 0x248 /* Parallel Data (r/w) */ - - -/* Definition offset address for CS2-7 -- old mask 5307 */ - -#define MCF5307_CS2 (0x400000) -#define MCF5307_CS3 (0x600000) -#define MCF5307_CS4 (0x800000) -#define MCF5307_CS5 (0xA00000) -#define MCF5307_CS6 (0xC00000) -#define MCF5307_CS7 (0xE00000) - - -/* - * Some symbol defines for the above... - */ -#define MCFSIM_SWDICR MCFSIM_ICR0 /* Watchdog timer ICR */ -#define MCFSIM_TIMER1ICR MCFSIM_ICR1 /* Timer 1 ICR */ -#define MCFSIM_TIMER2ICR MCFSIM_ICR2 /* Timer 2 ICR */ -#define MCFSIM_UART1ICR MCFSIM_ICR4 /* UART 1 ICR */ -#define MCFSIM_UART2ICR MCFSIM_ICR5 /* UART 2 ICR */ -#define MCFSIM_DMA0ICR MCFSIM_ICR6 /* DMA 0 ICR */ -#define MCFSIM_DMA1ICR MCFSIM_ICR7 /* DMA 1 ICR */ -#define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */ -#define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */ - -#if defined(CONFIG_M5307) -#define MCFSIM_IMR_MASKALL 0x3fffe /* All SIM intr sources */ -#endif - -/* - * Macro to set IMR register. It is 32 bits on the 5307. - */ -#define mcf_getimr() \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) - -#define mcf_setimr(imr) \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr); - -#define mcf_getipr() \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR)) - - -/* - * Some symbol defines for the Parallel Port Pin Assignment Register - */ -#define MCFSIM_PAR_DREQ0 0x40 /* Set to select DREQ0 input */ - /* Clear to select par I/O */ -#define MCFSIM_PAR_DREQ1 0x20 /* Select DREQ1 input */ - /* Clear to select par I/O */ - -/* - * Defines for the IRQPAR Register - */ -#define IRQ5_LEVEL4 0x80 -#define IRQ3_LEVEL6 0x40 -#define IRQ1_LEVEL2 0x20 - - -/* - * Define the Cache register flags. - */ -#define CACR_EC (1<<31) -#define CACR_ESB (1<<29) -#define CACR_DPI (1<<28) -#define CACR_HLCK (1<<27) -#define CACR_CINVA (1<<24) -#define CACR_DNFB (1<<10) -#define CACR_DCM_WTHRU (0<<8) -#define CACR_DCM_WBACK (1<<8) -#define CACR_DCM_OFF_PRE (2<<8) -#define CACR_DCM_OFF_IMP (3<<8) -#define CACR_DW (1<<5) - -#define ACR_BASE_POS 24 -#define ACR_MASK_POS 16 -#define ACR_ENABLE (1<<15) -#define ACR_USER (0<<13) -#define ACR_SUPER (1<<13) -#define ACR_ANY (2<<13) -#define ACR_CM_WTHRU (0<<5) -#define ACR_CM_WBACK (1<<5) -#define ACR_CM_OFF_PRE (2<<5) -#define ACR_CM_OFF_IMP (3<<5) -#define ACR_WPROTECT (1<<2) - -/****************************************************************************/ -#endif /* m5307sim_h */ diff --git a/arch/m68knommu/include/asm/m532xsim.h b/arch/m68knommu/include/asm/m532xsim.h deleted file mode 100644 index 1835fd20a82..00000000000 --- a/arch/m68knommu/include/asm/m532xsim.h +++ /dev/null @@ -1,2238 +0,0 @@ -/****************************************************************************/ - -/* - * m532xsim.h -- ColdFire 5329 registers - */ - -/****************************************************************************/ -#ifndef m532xsim_h -#define m532xsim_h -/****************************************************************************/ - -#define MCF_REG32(x) (*(volatile unsigned long *)(x)) -#define MCF_REG16(x) (*(volatile unsigned short *)(x)) -#define MCF_REG08(x) (*(volatile unsigned char *)(x)) - -#define MCFINT_VECBASE 64 -#define MCFINT_UART0 26 /* Interrupt number for UART0 */ -#define MCFINT_UART1 27 /* Interrupt number for UART1 */ - -#define MCF_WTM_WCR MCF_REG16(0xFC098000) - -/* - * Define the 532x SIM register set addresses. - */ -#define MCFSIM_IPRL 0xFC048004 -#define MCFSIM_IPRH 0xFC048000 -#define MCFSIM_IPR MCFSIM_IPRL -#define MCFSIM_IMRL 0xFC04800C -#define MCFSIM_IMRH 0xFC048008 -#define MCFSIM_IMR MCFSIM_IMRL -#define MCFSIM_ICR0 0xFC048040 -#define MCFSIM_ICR1 0xFC048041 -#define MCFSIM_ICR2 0xFC048042 -#define MCFSIM_ICR3 0xFC048043 -#define MCFSIM_ICR4 0xFC048044 -#define MCFSIM_ICR5 0xFC048045 -#define MCFSIM_ICR6 0xFC048046 -#define MCFSIM_ICR7 0xFC048047 -#define MCFSIM_ICR8 0xFC048048 -#define MCFSIM_ICR9 0xFC048049 -#define MCFSIM_ICR10 0xFC04804A -#define MCFSIM_ICR11 0xFC04804B - -/* - * Some symbol defines for the above... - */ -#define MCFSIM_SWDICR MCFSIM_ICR0 /* Watchdog timer ICR */ -#define MCFSIM_TIMER1ICR MCFSIM_ICR1 /* Timer 1 ICR */ -#define MCFSIM_TIMER2ICR MCFSIM_ICR2 /* Timer 2 ICR */ -#define MCFSIM_UART1ICR MCFSIM_ICR4 /* UART 1 ICR */ -#define MCFSIM_UART2ICR MCFSIM_ICR5 /* UART 2 ICR */ -#define MCFSIM_DMA0ICR MCFSIM_ICR6 /* DMA 0 ICR */ -#define MCFSIM_DMA1ICR MCFSIM_ICR7 /* DMA 1 ICR */ -#define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */ -#define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */ - - -#define MCFSIM_IMR_MASKALL 0xFFFFFFFF /* All SIM intr sources */ - -#define MCFSIM_IMR_SIMR0 0xFC04801C -#define MCFSIM_IMR_SIMR1 0xFC04C01C -#define MCFSIM_IMR_CIMR0 0xFC04801D -#define MCFSIM_IMR_CIMR1 0xFC04C01D - -#define MCFSIM_ICR_TIMER1 (0xFC048040+32) -#define MCFSIM_ICR_TIMER2 (0xFC048040+33) - - -/* - * Macro to set IMR register. It is 32 bits on the 5307. - */ -#define mcf_getimr() \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) - -#define mcf_setimr(imr) \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr); - -#define mcf_getipr() \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR)) - -#define mcf_getiprl() \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPRL)) - -#define mcf_getiprh() \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPRH)) - - -#define mcf_enable_irq0(irq) \ - *((volatile unsigned char*) (MCFSIM_IMR_CIMR0)) = (irq); - -#define mcf_enable_irq1(irq) \ - *((volatile unsigned char*) (MCFSIM_IMR_CIMR1)) = (irq); - -#define mcf_disable_irq0(irq) \ - *((volatile unsigned char*) (MCFSIM_IMR_SIMR0)) = (irq); - -#define mcf_disable_irq1(irq) \ - *((volatile unsigned char*) (MCFSIM_IMR_SIMR1)) = (irq); - -/* - * Define the Cache register flags. - */ -#define CACR_EC (1<<31) -#define CACR_ESB (1<<29) -#define CACR_DPI (1<<28) -#define CACR_HLCK (1<<27) -#define CACR_CINVA (1<<24) -#define CACR_DNFB (1<<10) -#define CACR_DCM_WTHRU (0<<8) -#define CACR_DCM_WBACK (1<<8) -#define CACR_DCM_OFF_PRE (2<<8) -#define CACR_DCM_OFF_IMP (3<<8) -#define CACR_DW (1<<5) - -#define ACR_BASE_POS 24 -#define ACR_MASK_POS 16 -#define ACR_ENABLE (1<<15) -#define ACR_USER (0<<13) -#define ACR_SUPER (1<<13) -#define ACR_ANY (2<<13) -#define ACR_CM_WTHRU (0<<5) -#define ACR_CM_WBACK (1<<5) -#define ACR_CM_OFF_PRE (2<<5) -#define ACR_CM_OFF_IMP (3<<5) -#define ACR_WPROTECT (1<<2) - -/********************************************************************* - * - * Inter-IC (I2C) Module - * - *********************************************************************/ - -/* Read/Write access macros for general use */ -#define MCF532x_I2C_I2ADR (volatile u8 *) (0xFC058000) // Address -#define MCF532x_I2C_I2FDR (volatile u8 *) (0xFC058004) // Freq Divider -#define MCF532x_I2C_I2CR (volatile u8 *) (0xFC058008) // Control -#define MCF532x_I2C_I2SR (volatile u8 *) (0xFC05800C) // Status -#define MCF532x_I2C_I2DR (volatile u8 *) (0xFC058010) // Data I/O - -/* Bit level definitions and macros */ -#define MCF532x_I2C_I2ADR_ADDR(x) (((x)&0x7F)<<0x01) - -#define MCF532x_I2C_I2FDR_IC(x) (((x)&0x3F)) - -#define MCF532x_I2C_I2CR_IEN (0x80) // I2C enable -#define MCF532x_I2C_I2CR_IIEN (0x40) // interrupt enable -#define MCF532x_I2C_I2CR_MSTA (0x20) // master/slave mode -#define MCF532x_I2C_I2CR_MTX (0x10) // transmit/receive mode -#define MCF532x_I2C_I2CR_TXAK (0x08) // transmit acknowledge enable -#define MCF532x_I2C_I2CR_RSTA (0x04) // repeat start - -#define MCF532x_I2C_I2SR_ICF (0x80) // data transfer bit -#define MCF532x_I2C_I2SR_IAAS (0x40) // I2C addressed as a slave -#define MCF532x_I2C_I2SR_IBB (0x20) // I2C bus busy -#define MCF532x_I2C_I2SR_IAL (0x10) // aribitration lost -#define MCF532x_I2C_I2SR_SRW (0x04) // slave read/write -#define MCF532x_I2C_I2SR_IIF (0x02) // I2C interrupt -#define MCF532x_I2C_I2SR_RXAK (0x01) // received acknowledge - -#define MCF532x_PAR_FECI2C (volatile u8 *) (0xFC0A4053) - - -/* - * The M5329EVB board needs a help getting its devices initialized - * at kernel start time if dBUG doesn't set it up (for example - * it is not used), so we need to do it manually. - */ -#ifdef __ASSEMBLER__ -.macro m5329EVB_setup - movel #0xFC098000, %a7 - movel #0x0, (%a7) -#define CORE_SRAM 0x80000000 -#define CORE_SRAM_SIZE 0x8000 - movel #CORE_SRAM, %d0 - addl #0x221, %d0 - movec %d0,%RAMBAR1 - movel #CORE_SRAM, %sp - addl #CORE_SRAM_SIZE, %sp - jsr sysinit -.endm -#define PLATFORM_SETUP m5329EVB_setup - -#endif /* __ASSEMBLER__ */ - -/********************************************************************* - * - * Chip Configuration Module (CCM) - * - *********************************************************************/ - -/* Register read/write macros */ -#define MCF_CCM_CCR MCF_REG16(0xFC0A0004) -#define MCF_CCM_RCON MCF_REG16(0xFC0A0008) -#define MCF_CCM_CIR MCF_REG16(0xFC0A000A) -#define MCF_CCM_MISCCR MCF_REG16(0xFC0A0010) -#define MCF_CCM_CDR MCF_REG16(0xFC0A0012) -#define MCF_CCM_UHCSR MCF_REG16(0xFC0A0014) -#define MCF_CCM_UOCSR MCF_REG16(0xFC0A0016) - -/* Bit definitions and macros for MCF_CCM_CCR */ -#define MCF_CCM_CCR_RESERVED (0x0001) -#define MCF_CCM_CCR_PLL_MODE (0x0003) -#define MCF_CCM_CCR_OSC_MODE (0x0005) -#define MCF_CCM_CCR_BOOTPS(x) (((x)&0x0003)<<3|0x0001) -#define MCF_CCM_CCR_LOAD (0x0021) -#define MCF_CCM_CCR_LIMP (0x0041) -#define MCF_CCM_CCR_CSC(x) (((x)&0x0003)<<8|0x0001) - -/* Bit definitions and macros for MCF_CCM_RCON */ -#define MCF_CCM_RCON_RESERVED (0x0001) -#define MCF_CCM_RCON_PLL_MODE (0x0003) -#define MCF_CCM_RCON_OSC_MODE (0x0005) -#define MCF_CCM_RCON_BOOTPS(x) (((x)&0x0003)<<3|0x0001) -#define MCF_CCM_RCON_LOAD (0x0021) -#define MCF_CCM_RCON_LIMP (0x0041) -#define MCF_CCM_RCON_CSC(x) (((x)&0x0003)<<8|0x0001) - -/* Bit definitions and macros for MCF_CCM_CIR */ -#define MCF_CCM_CIR_PRN(x) (((x)&0x003F)<<0) -#define MCF_CCM_CIR_PIN(x) (((x)&0x03FF)<<6) - -/* Bit definitions and macros for MCF_CCM_MISCCR */ -#define MCF_CCM_MISCCR_USBSRC (0x0001) -#define MCF_CCM_MISCCR_USBDIV (0x0002) -#define MCF_CCM_MISCCR_SSI_SRC (0x0010) -#define MCF_CCM_MISCCR_TIM_DMA (0x0020) -#define MCF_CCM_MISCCR_SSI_PUS (0x0040) -#define MCF_CCM_MISCCR_SSI_PUE (0x0080) -#define MCF_CCM_MISCCR_LCD_CHEN (0x0100) -#define MCF_CCM_MISCCR_LIMP (0x1000) -#define MCF_CCM_MISCCR_PLL_LOCK (0x2000) - -/* Bit definitions and macros for MCF_CCM_CDR */ -#define MCF_CCM_CDR_SSIDIV(x) (((x)&0x000F)<<0) -#define MCF_CCM_CDR_LPDIV(x) (((x)&0x000F)<<8) - -/* Bit definitions and macros for MCF_CCM_UHCSR */ -#define MCF_CCM_UHCSR_XPDE (0x0001) -#define MCF_CCM_UHCSR_UHMIE (0x0002) -#define MCF_CCM_UHCSR_WKUP (0x0004) -#define MCF_CCM_UHCSR_PORTIND(x) (((x)&0x0003)<<14) - -/* Bit definitions and macros for MCF_CCM_UOCSR */ -#define MCF_CCM_UOCSR_XPDE (0x0001) -#define MCF_CCM_UOCSR_UOMIE (0x0002) -#define MCF_CCM_UOCSR_WKUP (0x0004) -#define MCF_CCM_UOCSR_PWRFLT (0x0008) -#define MCF_CCM_UOCSR_SEND (0x0010) -#define MCF_CCM_UOCSR_VVLD (0x0020) -#define MCF_CCM_UOCSR_BVLD (0x0040) -#define MCF_CCM_UOCSR_AVLD (0x0080) -#define MCF_CCM_UOCSR_DPPU (0x0100) -#define MCF_CCM_UOCSR_DCR_VBUS (0x0200) -#define MCF_CCM_UOCSR_CRG_VBUS (0x0400) -#define MCF_CCM_UOCSR_DRV_VBUS (0x0800) -#define MCF_CCM_UOCSR_DMPD (0x1000) -#define MCF_CCM_UOCSR_DPPD (0x2000) -#define MCF_CCM_UOCSR_PORTIND(x) (((x)&0x0003)<<14) - -/********************************************************************* - * - * DMA Timers (DTIM) - * - *********************************************************************/ - -/* Register read/write macros */ -#define MCF_DTIM0_DTMR MCF_REG16(0xFC070000) -#define MCF_DTIM0_DTXMR MCF_REG08(0xFC070002) -#define MCF_DTIM0_DTER MCF_REG08(0xFC070003) -#define MCF_DTIM0_DTRR MCF_REG32(0xFC070004) -#define MCF_DTIM0_DTCR MCF_REG32(0xFC070008) -#define MCF_DTIM0_DTCN MCF_REG32(0xFC07000C) -#define MCF_DTIM1_DTMR MCF_REG16(0xFC074000) -#define MCF_DTIM1_DTXMR MCF_REG08(0xFC074002) -#define MCF_DTIM1_DTER MCF_REG08(0xFC074003) -#define MCF_DTIM1_DTRR MCF_REG32(0xFC074004) -#define MCF_DTIM1_DTCR MCF_REG32(0xFC074008) -#define MCF_DTIM1_DTCN MCF_REG32(0xFC07400C) -#define MCF_DTIM2_DTMR MCF_REG16(0xFC078000) -#define MCF_DTIM2_DTXMR MCF_REG08(0xFC078002) -#define MCF_DTIM2_DTER MCF_REG08(0xFC078003) -#define MCF_DTIM2_DTRR MCF_REG32(0xFC078004) -#define MCF_DTIM2_DTCR MCF_REG32(0xFC078008) -#define MCF_DTIM2_DTCN MCF_REG32(0xFC07800C) -#define MCF_DTIM3_DTMR MCF_REG16(0xFC07C000) -#define MCF_DTIM3_DTXMR MCF_REG08(0xFC07C002) -#define MCF_DTIM3_DTER MCF_REG08(0xFC07C003) -#define MCF_DTIM3_DTRR MCF_REG32(0xFC07C004) -#define MCF_DTIM3_DTCR MCF_REG32(0xFC07C008) -#define MCF_DTIM3_DTCN MCF_REG32(0xFC07C00C) -#define MCF_DTIM_DTMR(x) MCF_REG16(0xFC070000+((x)*0x4000)) -#define MCF_DTIM_DTXMR(x) MCF_REG08(0xFC070002+((x)*0x4000)) -#define MCF_DTIM_DTER(x) MCF_REG08(0xFC070003+((x)*0x4000)) -#define MCF_DTIM_DTRR(x) MCF_REG32(0xFC070004+((x)*0x4000)) -#define MCF_DTIM_DTCR(x) MCF_REG32(0xFC070008+((x)*0x4000)) -#define MCF_DTIM_DTCN(x) MCF_REG32(0xFC07000C+((x)*0x4000)) - -/* Bit definitions and macros for MCF_DTIM_DTMR */ -#define MCF_DTIM_DTMR_RST (0x0001) -#define MCF_DTIM_DTMR_CLK(x) (((x)&0x0003)<<1) -#define MCF_DTIM_DTMR_FRR (0x0008) -#define MCF_DTIM_DTMR_ORRI (0x0010) -#define MCF_DTIM_DTMR_OM (0x0020) -#define MCF_DTIM_DTMR_CE(x) (((x)&0x0003)<<6) -#define MCF_DTIM_DTMR_PS(x) (((x)&0x00FF)<<8) -#define MCF_DTIM_DTMR_CE_ANY (0x00C0) -#define MCF_DTIM_DTMR_CE_FALL (0x0080) -#define MCF_DTIM_DTMR_CE_RISE (0x0040) -#define MCF_DTIM_DTMR_CE_NONE (0x0000) -#define MCF_DTIM_DTMR_CLK_DTIN (0x0006) -#define MCF_DTIM_DTMR_CLK_DIV16 (0x0004) -#define MCF_DTIM_DTMR_CLK_DIV1 (0x0002) -#define MCF_DTIM_DTMR_CLK_STOP (0x0000) - -/* Bit definitions and macros for MCF_DTIM_DTXMR */ -#define MCF_DTIM_DTXMR_MODE16 (0x01) -#define MCF_DTIM_DTXMR_DMAEN (0x80) - -/* Bit definitions and macros for MCF_DTIM_DTER */ -#define MCF_DTIM_DTER_CAP (0x01) -#define MCF_DTIM_DTER_REF (0x02) - -/* Bit definitions and macros for MCF_DTIM_DTRR */ -#define MCF_DTIM_DTRR_REF(x) (((x)&0xFFFFFFFF)<<0) - -/* Bit definitions and macros for MCF_DTIM_DTCR */ -#define MCF_DTIM_DTCR_CAP(x) (((x)&0xFFFFFFFF)<<0) - -/* Bit definitions and macros for MCF_DTIM_DTCN */ -#define MCF_DTIM_DTCN_CNT(x) (((x)&0xFFFFFFFF)<<0) - -/********************************************************************* - * - * FlexBus Chip Selects (FBCS) - * - *********************************************************************/ - -/* Register read/write macros */ -#define MCF_FBCS0_CSAR MCF_REG32(0xFC008000) -#define MCF_FBCS0_CSMR MCF_REG32(0xFC008004) -#define MCF_FBCS0_CSCR MCF_REG32(0xFC008008) -#define MCF_FBCS1_CSAR MCF_REG32(0xFC00800C) -#define MCF_FBCS1_CSMR MCF_REG32(0xFC008010) -#define MCF_FBCS1_CSCR MCF_REG32(0xFC008014) -#define MCF_FBCS2_CSAR MCF_REG32(0xFC008018) -#define MCF_FBCS2_CSMR MCF_REG32(0xFC00801C) -#define MCF_FBCS2_CSCR MCF_REG32(0xFC008020) -#define MCF_FBCS3_CSAR MCF_REG32(0xFC008024) -#define MCF_FBCS3_CSMR MCF_REG32(0xFC008028) -#define MCF_FBCS3_CSCR MCF_REG32(0xFC00802C) -#define MCF_FBCS4_CSAR MCF_REG32(0xFC008030) -#define MCF_FBCS4_CSMR MCF_REG32(0xFC008034) -#define MCF_FBCS4_CSCR MCF_REG32(0xFC008038) -#define MCF_FBCS5_CSAR MCF_REG32(0xFC00803C) -#define MCF_FBCS5_CSMR MCF_REG32(0xFC008040) -#define MCF_FBCS5_CSCR MCF_REG32(0xFC008044) -#define MCF_FBCS_CSAR(x) MCF_REG32(0xFC008000+((x)*0x00C)) -#define MCF_FBCS_CSMR(x) MCF_REG32(0xFC008004+((x)*0x00C)) -#define MCF_FBCS_CSCR(x) MCF_REG32(0xFC008008+((x)*0x00C)) - -/* Bit definitions and macros for MCF_FBCS_CSAR */ -#define MCF_FBCS_CSAR_BA(x) ((x)&0xFFFF0000) - -/* Bit definitions and macros for MCF_FBCS_CSMR */ -#define MCF_FBCS_CSMR_V (0x00000001) -#define MCF_FBCS_CSMR_WP (0x00000100) -#define MCF_FBCS_CSMR_BAM(x) (((x)&0x0000FFFF)<<16) -#define MCF_FBCS_CSMR_BAM_4G (0xFFFF0000) -#define MCF_FBCS_CSMR_BAM_2G (0x7FFF0000) -#define MCF_FBCS_CSMR_BAM_1G (0x3FFF0000) -#define MCF_FBCS_CSMR_BAM_1024M (0x3FFF0000) -#define MCF_FBCS_CSMR_BAM_512M (0x1FFF0000) -#define MCF_FBCS_CSMR_BAM_256M (0x0FFF0000) -#define MCF_FBCS_CSMR_BAM_128M (0x07FF0000) -#define MCF_FBCS_CSMR_BAM_64M (0x03FF0000) -#define MCF_FBCS_CSMR_BAM_32M (0x01FF0000) -#define MCF_FBCS_CSMR_BAM_16M (0x00FF0000) -#define MCF_FBCS_CSMR_BAM_8M (0x007F0000) -#define MCF_FBCS_CSMR_BAM_4M (0x003F0000) -#define MCF_FBCS_CSMR_BAM_2M (0x001F0000) -#define MCF_FBCS_CSMR_BAM_1M (0x000F0000) -#define MCF_FBCS_CSMR_BAM_1024K (0x000F0000) -#define MCF_FBCS_CSMR_BAM_512K (0x00070000) -#define MCF_FBCS_CSMR_BAM_256K (0x00030000) -#define MCF_FBCS_CSMR_BAM_128K (0x00010000) -#define MCF_FBCS_CSMR_BAM_64K (0x00000000) - -/* Bit definitions and macros for MCF_FBCS_CSCR */ -#define MCF_FBCS_CSCR_BSTW (0x00000008) -#define MCF_FBCS_CSCR_BSTR (0x00000010) -#define MCF_FBCS_CSCR_BEM (0x00000020) -#define MCF_FBCS_CSCR_PS(x) (((x)&0x00000003)<<6) -#define MCF_FBCS_CSCR_AA (0x00000100) -#define MCF_FBCS_CSCR_SBM (0x00000200) -#define MCF_FBCS_CSCR_WS(x) (((x)&0x0000003F)<<10) -#define MCF_FBCS_CSCR_WRAH(x) (((x)&0x00000003)<<16) -#define MCF_FBCS_CSCR_RDAH(x) (((x)&0x00000003)<<18) -#define MCF_FBCS_CSCR_ASET(x) (((x)&0x00000003)<<20) -#define MCF_FBCS_CSCR_SWSEN (0x00800000) -#define MCF_FBCS_CSCR_SWS(x) (((x)&0x0000003F)<<26) -#define MCF_FBCS_CSCR_PS_8 (0x0040) -#define MCF_FBCS_CSCR_PS_16 (0x0080) -#define MCF_FBCS_CSCR_PS_32 (0x0000) - -/********************************************************************* - * - * General Purpose I/O (GPIO) - * - *********************************************************************/ - -/* Register read/write macros */ -#define MCF_GPIO_PODR_FECH MCF_REG08(0xFC0A4000) -#define MCF_GPIO_PODR_FECL MCF_REG08(0xFC0A4001) -#define MCF_GPIO_PODR_SSI MCF_REG08(0xFC0A4002) -#define MCF_GPIO_PODR_BUSCTL MCF_REG08(0xFC0A4003) -#define MCF_GPIO_PODR_BE MCF_REG08(0xFC0A4004) -#define MCF_GPIO_PODR_CS MCF_REG08(0xFC0A4005) -#define MCF_GPIO_PODR_PWM MCF_REG08(0xFC0A4006) -#define MCF_GPIO_PODR_FECI2C MCF_REG08(0xFC0A4007) -#define MCF_GPIO_PODR_UART MCF_REG08(0xFC0A4009) -#define MCF_GPIO_PODR_QSPI MCF_REG08(0xFC0A400A) -#define MCF_GPIO_PODR_TIMER MCF_REG08(0xFC0A400B) -#define MCF_GPIO_PODR_LCDDATAH MCF_REG08(0xFC0A400D) -#define MCF_GPIO_PODR_LCDDATAM MCF_REG08(0xFC0A400E) -#define MCF_GPIO_PODR_LCDDATAL MCF_REG08(0xFC0A400F) -#define MCF_GPIO_PODR_LCDCTLH MCF_REG08(0xFC0A4010) -#define MCF_GPIO_PODR_LCDCTLL MCF_REG08(0xFC0A4011) -#define MCF_GPIO_PDDR_FECH MCF_REG08(0xFC0A4014) -#define MCF_GPIO_PDDR_FECL MCF_REG08(0xFC0A4015) -#define MCF_GPIO_PDDR_SSI MCF_REG08(0xFC0A4016) -#define MCF_GPIO_PDDR_BUSCTL MCF_REG08(0xFC0A4017) -#define MCF_GPIO_PDDR_BE MCF_REG08(0xFC0A4018) -#define MCF_GPIO_PDDR_CS MCF_REG08(0xFC0A4019) -#define MCF_GPIO_PDDR_PWM MCF_REG08(0xFC0A401A) -#define MCF_GPIO_PDDR_FECI2C MCF_REG08(0xFC0A401B) -#define MCF_GPIO_PDDR_UART MCF_REG08(0xFC0A401C) -#define MCF_GPIO_PDDR_QSPI MCF_REG08(0xFC0A401E) -#define MCF_GPIO_PDDR_TIMER MCF_REG08(0xFC0A401F) -#define MCF_GPIO_PDDR_LCDDATAH MCF_REG08(0xFC0A4021) -#define MCF_GPIO_PDDR_LCDDATAM MCF_REG08(0xFC0A4022) -#define MCF_GPIO_PDDR_LCDDATAL MCF_REG08(0xFC0A4023) -#define MCF_GPIO_PDDR_LCDCTLH MCF_REG08(0xFC0A4024) -#define MCF_GPIO_PDDR_LCDCTLL MCF_REG08(0xFC0A4025) -#define MCF_GPIO_PPDSDR_FECH MCF_REG08(0xFC0A4028) -#define MCF_GPIO_PPDSDR_FECL MCF_REG08(0xFC0A4029) -#define MCF_GPIO_PPDSDR_SSI MCF_REG08(0xFC0A402A) -#define MCF_GPIO_PPDSDR_BUSCTL MCF_REG08(0xFC0A402B) -#define MCF_GPIO_PPDSDR_BE MCF_REG08(0xFC0A402C) -#define MCF_GPIO_PPDSDR_CS MCF_REG08(0xFC0A402D) -#define MCF_GPIO_PPDSDR_PWM MCF_REG08(0xFC0A402E) -#define MCF_GPIO_PPDSDR_FECI2C MCF_REG08(0xFC0A402F) -#define MCF_GPIO_PPDSDR_UART MCF_REG08(0xFC0A4031) -#define MCF_GPIO_PPDSDR_QSPI MCF_REG08(0xFC0A4032) -#define MCF_GPIO_PPDSDR_TIMER MCF_REG08(0xFC0A4033) -#define MCF_GPIO_PPDSDR_LCDDATAH MCF_REG08(0xFC0A4035) -#define MCF_GPIO_PPDSDR_LCDDATAM MCF_REG08(0xFC0A4036) -#define MCF_GPIO_PPDSDR_LCDDATAL MCF_REG08(0xFC0A4037) -#define MCF_GPIO_PPDSDR_LCDCTLH MCF_REG08(0xFC0A4038) -#define MCF_GPIO_PPDSDR_LCDCTLL MCF_REG08(0xFC0A4039) -#define MCF_GPIO_PCLRR_FECH MCF_REG08(0xFC0A403C) -#define MCF_GPIO_PCLRR_FECL MCF_REG08(0xFC0A403D) -#define MCF_GPIO_PCLRR_SSI MCF_REG08(0xFC0A403E) -#define MCF_GPIO_PCLRR_BUSCTL MCF_REG08(0xFC0A403F) -#define MCF_GPIO_PCLRR_BE MCF_REG08(0xFC0A4040) -#define MCF_GPIO_PCLRR_CS MCF_REG08(0xFC0A4041) -#define MCF_GPIO_PCLRR_PWM MCF_REG08(0xFC0A4042) -#define MCF_GPIO_PCLRR_FECI2C MCF_REG08(0xFC0A4043) -#define MCF_GPIO_PCLRR_UART MCF_REG08(0xFC0A4045) -#define MCF_GPIO_PCLRR_QSPI MCF_REG08(0xFC0A4046) -#define MCF_GPIO_PCLRR_TIMER MCF_REG08(0xFC0A4047) -#define MCF_GPIO_PCLRR_LCDDATAH MCF_REG08(0xFC0A4049) -#define MCF_GPIO_PCLRR_LCDDATAM MCF_REG08(0xFC0A404A) -#define MCF_GPIO_PCLRR_LCDDATAL MCF_REG08(0xFC0A404B) -#define MCF_GPIO_PCLRR_LCDCTLH MCF_REG08(0xFC0A404C) -#define MCF_GPIO_PCLRR_LCDCTLL MCF_REG08(0xFC0A404D) -#define MCF_GPIO_PAR_FEC MCF_REG08(0xFC0A4050) -#define MCF_GPIO_PAR_PWM MCF_REG08(0xFC0A4051) -#define MCF_GPIO_PAR_BUSCTL MCF_REG08(0xFC0A4052) -#define MCF_GPIO_PAR_FECI2C MCF_REG08(0xFC0A4053) -#define MCF_GPIO_PAR_BE MCF_REG08(0xFC0A4054) -#define MCF_GPIO_PAR_CS MCF_REG08(0xFC0A4055) -#define MCF_GPIO_PAR_SSI MCF_REG16(0xFC0A4056) -#define MCF_GPIO_PAR_UART MCF_REG16(0xFC0A4058) -#define MCF_GPIO_PAR_QSPI MCF_REG16(0xFC0A405A) -#define MCF_GPIO_PAR_TIMER MCF_REG08(0xFC0A405C) -#define MCF_GPIO_PAR_LCDDATA MCF_REG08(0xFC0A405D) -#define MCF_GPIO_PAR_LCDCTL MCF_REG16(0xFC0A405E) -#define MCF_GPIO_PAR_IRQ MCF_REG16(0xFC0A4060) -#define MCF_GPIO_MSCR_FLEXBUS MCF_REG08(0xFC0A4064) -#define MCF_GPIO_MSCR_SDRAM MCF_REG08(0xFC0A4065) -#define MCF_GPIO_DSCR_I2C MCF_REG08(0xFC0A4068) -#define MCF_GPIO_DSCR_PWM MCF_REG08(0xFC0A4069) -#define MCF_GPIO_DSCR_FEC MCF_REG08(0xFC0A406A) -#define MCF_GPIO_DSCR_UART MCF_REG08(0xFC0A406B) -#define MCF_GPIO_DSCR_QSPI MCF_REG08(0xFC0A406C) -#define MCF_GPIO_DSCR_TIMER MCF_REG08(0xFC0A406D) -#define MCF_GPIO_DSCR_SSI MCF_REG08(0xFC0A406E) -#define MCF_GPIO_DSCR_LCD MCF_REG08(0xFC0A406F) -#define MCF_GPIO_DSCR_DEBUG MCF_REG08(0xFC0A4070) -#define MCF_GPIO_DSCR_CLKRST MCF_REG08(0xFC0A4071) -#define MCF_GPIO_DSCR_IRQ MCF_REG08(0xFC0A4072) - -/* Bit definitions and macros for MCF_GPIO_PODR_FECH */ -#define MCF_GPIO_PODR_FECH_PODR_FECH0 (0x01) -#define MCF_GPIO_PODR_FECH_PODR_FECH1 (0x02) -#define MCF_GPIO_PODR_FECH_PODR_FECH2 (0x04) -#define MCF_GPIO_PODR_FECH_PODR_FECH3 (0x08) -#define MCF_GPIO_PODR_FECH_PODR_FECH4 (0x10) -#define MCF_GPIO_PODR_FECH_PODR_FECH5 (0x20) -#define MCF_GPIO_PODR_FECH_PODR_FECH6 (0x40) -#define MCF_GPIO_PODR_FECH_PODR_FECH7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PODR_FECL */ -#define MCF_GPIO_PODR_FECL_PODR_FECL0 (0x01) -#define MCF_GPIO_PODR_FECL_PODR_FECL1 (0x02) -#define MCF_GPIO_PODR_FECL_PODR_FECL2 (0x04) -#define MCF_GPIO_PODR_FECL_PODR_FECL3 (0x08) -#define MCF_GPIO_PODR_FECL_PODR_FECL4 (0x10) -#define MCF_GPIO_PODR_FECL_PODR_FECL5 (0x20) -#define MCF_GPIO_PODR_FECL_PODR_FECL6 (0x40) -#define MCF_GPIO_PODR_FECL_PODR_FECL7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PODR_SSI */ -#define MCF_GPIO_PODR_SSI_PODR_SSI0 (0x01) -#define MCF_GPIO_PODR_SSI_PODR_SSI1 (0x02) -#define MCF_GPIO_PODR_SSI_PODR_SSI2 (0x04) -#define MCF_GPIO_PODR_SSI_PODR_SSI3 (0x08) -#define MCF_GPIO_PODR_SSI_PODR_SSI4 (0x10) - -/* Bit definitions and macros for MCF_GPIO_PODR_BUSCTL */ -#define MCF_GPIO_PODR_BUSCTL_POSDR_BUSCTL0 (0x01) -#define MCF_GPIO_PODR_BUSCTL_PODR_BUSCTL1 (0x02) -#define MCF_GPIO_PODR_BUSCTL_PODR_BUSCTL2 (0x04) -#define MCF_GPIO_PODR_BUSCTL_PODR_BUSCTL3 (0x08) - -/* Bit definitions and macros for MCF_GPIO_PODR_BE */ -#define MCF_GPIO_PODR_BE_PODR_BE0 (0x01) -#define MCF_GPIO_PODR_BE_PODR_BE1 (0x02) -#define MCF_GPIO_PODR_BE_PODR_BE2 (0x04) -#define MCF_GPIO_PODR_BE_PODR_BE3 (0x08) - -/* Bit definitions and macros for MCF_GPIO_PODR_CS */ -#define MCF_GPIO_PODR_CS_PODR_CS1 (0x02) -#define MCF_GPIO_PODR_CS_PODR_CS2 (0x04) -#define MCF_GPIO_PODR_CS_PODR_CS3 (0x08) -#define MCF_GPIO_PODR_CS_PODR_CS4 (0x10) -#define MCF_GPIO_PODR_CS_PODR_CS5 (0x20) - -/* Bit definitions and macros for MCF_GPIO_PODR_PWM */ -#define MCF_GPIO_PODR_PWM_PODR_PWM2 (0x04) -#define MCF_GPIO_PODR_PWM_PODR_PWM3 (0x08) -#define MCF_GPIO_PODR_PWM_PODR_PWM4 (0x10) -#define MCF_GPIO_PODR_PWM_PODR_PWM5 (0x20) - -/* Bit definitions and macros for MCF_GPIO_PODR_FECI2C */ -#define MCF_GPIO_PODR_FECI2C_PODR_FECI2C0 (0x01) -#define MCF_GPIO_PODR_FECI2C_PODR_FECI2C1 (0x02) -#define MCF_GPIO_PODR_FECI2C_PODR_FECI2C2 (0x04) -#define MCF_GPIO_PODR_FECI2C_PODR_FECI2C3 (0x08) - -/* Bit definitions and macros for MCF_GPIO_PODR_UART */ -#define MCF_GPIO_PODR_UART_PODR_UART0 (0x01) -#define MCF_GPIO_PODR_UART_PODR_UART1 (0x02) -#define MCF_GPIO_PODR_UART_PODR_UART2 (0x04) -#define MCF_GPIO_PODR_UART_PODR_UART3 (0x08) -#define MCF_GPIO_PODR_UART_PODR_UART4 (0x10) -#define MCF_GPIO_PODR_UART_PODR_UART5 (0x20) -#define MCF_GPIO_PODR_UART_PODR_UART6 (0x40) -#define MCF_GPIO_PODR_UART_PODR_UART7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PODR_QSPI */ -#define MCF_GPIO_PODR_QSPI_PODR_QSPI0 (0x01) -#define MCF_GPIO_PODR_QSPI_PODR_QSPI1 (0x02) -#define MCF_GPIO_PODR_QSPI_PODR_QSPI2 (0x04) -#define MCF_GPIO_PODR_QSPI_PODR_QSPI3 (0x08) -#define MCF_GPIO_PODR_QSPI_PODR_QSPI4 (0x10) -#define MCF_GPIO_PODR_QSPI_PODR_QSPI5 (0x20) - -/* Bit definitions and macros for MCF_GPIO_PODR_TIMER */ -#define MCF_GPIO_PODR_TIMER_PODR_TIMER0 (0x01) -#define MCF_GPIO_PODR_TIMER_PODR_TIMER1 (0x02) -#define MCF_GPIO_PODR_TIMER_PODR_TIMER2 (0x04) -#define MCF_GPIO_PODR_TIMER_PODR_TIMER3 (0x08) - -/* Bit definitions and macros for MCF_GPIO_PODR_LCDDATAH */ -#define MCF_GPIO_PODR_LCDDATAH_PODR_LCDDATAH0 (0x01) -#define MCF_GPIO_PODR_LCDDATAH_PODR_LCDDATAH1 (0x02) - -/* Bit definitions and macros for MCF_GPIO_PODR_LCDDATAM */ -#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM0 (0x01) -#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM1 (0x02) -#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM2 (0x04) -#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM3 (0x08) -#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM4 (0x10) -#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM5 (0x20) -#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM6 (0x40) -#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PODR_LCDDATAL */ -#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL0 (0x01) -#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL1 (0x02) -#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL2 (0x04) -#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL3 (0x08) -#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL4 (0x10) -#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL5 (0x20) -#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL6 (0x40) -#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PODR_LCDCTLH */ -#define MCF_GPIO_PODR_LCDCTLH_PODR_LCDCTLH0 (0x01) - -/* Bit definitions and macros for MCF_GPIO_PODR_LCDCTLL */ -#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL0 (0x01) -#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL1 (0x02) -#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL2 (0x04) -#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL3 (0x08) -#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL4 (0x10) -#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL5 (0x20) -#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL6 (0x40) -#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PDDR_FECH */ -#define MCF_GPIO_PDDR_FECH_PDDR_FECH0 (0x01) -#define MCF_GPIO_PDDR_FECH_PDDR_FECH1 (0x02) -#define MCF_GPIO_PDDR_FECH_PDDR_FECH2 (0x04) -#define MCF_GPIO_PDDR_FECH_PDDR_FECH3 (0x08) -#define MCF_GPIO_PDDR_FECH_PDDR_FECH4 (0x10) -#define MCF_GPIO_PDDR_FECH_PDDR_FECH5 (0x20) -#define MCF_GPIO_PDDR_FECH_PDDR_FECH6 (0x40) -#define MCF_GPIO_PDDR_FECH_PDDR_FECH7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PDDR_FECL */ -#define MCF_GPIO_PDDR_FECL_PDDR_FECL0 (0x01) -#define MCF_GPIO_PDDR_FECL_PDDR_FECL1 (0x02) -#define MCF_GPIO_PDDR_FECL_PDDR_FECL2 (0x04) -#define MCF_GPIO_PDDR_FECL_PDDR_FECL3 (0x08) -#define MCF_GPIO_PDDR_FECL_PDDR_FECL4 (0x10) -#define MCF_GPIO_PDDR_FECL_PDDR_FECL5 (0x20) -#define MCF_GPIO_PDDR_FECL_PDDR_FECL6 (0x40) -#define MCF_GPIO_PDDR_FECL_PDDR_FECL7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PDDR_SSI */ -#define MCF_GPIO_PDDR_SSI_PDDR_SSI0 (0x01) -#define MCF_GPIO_PDDR_SSI_PDDR_SSI1 (0x02) -#define MCF_GPIO_PDDR_SSI_PDDR_SSI2 (0x04) -#define MCF_GPIO_PDDR_SSI_PDDR_SSI3 (0x08) -#define MCF_GPIO_PDDR_SSI_PDDR_SSI4 (0x10) - -/* Bit definitions and macros for MCF_GPIO_PDDR_BUSCTL */ -#define MCF_GPIO_PDDR_BUSCTL_POSDR_BUSCTL0 (0x01) -#define MCF_GPIO_PDDR_BUSCTL_PDDR_BUSCTL1 (0x02) -#define MCF_GPIO_PDDR_BUSCTL_PDDR_BUSCTL2 (0x04) -#define MCF_GPIO_PDDR_BUSCTL_PDDR_BUSCTL3 (0x08) - -/* Bit definitions and macros for MCF_GPIO_PDDR_BE */ -#define MCF_GPIO_PDDR_BE_PDDR_BE0 (0x01) -#define MCF_GPIO_PDDR_BE_PDDR_BE1 (0x02) -#define MCF_GPIO_PDDR_BE_PDDR_BE2 (0x04) -#define MCF_GPIO_PDDR_BE_PDDR_BE3 (0x08) - -/* Bit definitions and macros for MCF_GPIO_PDDR_CS */ -#define MCF_GPIO_PDDR_CS_PDDR_CS1 (0x02) -#define MCF_GPIO_PDDR_CS_PDDR_CS2 (0x04) -#define MCF_GPIO_PDDR_CS_PDDR_CS3 (0x08) -#define MCF_GPIO_PDDR_CS_PDDR_CS4 (0x10) -#define MCF_GPIO_PDDR_CS_PDDR_CS5 (0x20) - -/* Bit definitions and macros for MCF_GPIO_PDDR_PWM */ -#define MCF_GPIO_PDDR_PWM_PDDR_PWM2 (0x04) -#define MCF_GPIO_PDDR_PWM_PDDR_PWM3 (0x08) -#define MCF_GPIO_PDDR_PWM_PDDR_PWM4 (0x10) -#define MCF_GPIO_PDDR_PWM_PDDR_PWM5 (0x20) - -/* Bit definitions and macros for MCF_GPIO_PDDR_FECI2C */ -#define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C0 (0x01) -#define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C1 (0x02) -#define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C2 (0x04) -#define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C3 (0x08) - -/* Bit definitions and macros for MCF_GPIO_PDDR_UART */ -#define MCF_GPIO_PDDR_UART_PDDR_UART0 (0x01) -#define MCF_GPIO_PDDR_UART_PDDR_UART1 (0x02) -#define MCF_GPIO_PDDR_UART_PDDR_UART2 (0x04) -#define MCF_GPIO_PDDR_UART_PDDR_UART3 (0x08) -#define MCF_GPIO_PDDR_UART_PDDR_UART4 (0x10) -#define MCF_GPIO_PDDR_UART_PDDR_UART5 (0x20) -#define MCF_GPIO_PDDR_UART_PDDR_UART6 (0x40) -#define MCF_GPIO_PDDR_UART_PDDR_UART7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PDDR_QSPI */ -#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI0 (0x01) -#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI1 (0x02) -#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI2 (0x04) -#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI3 (0x08) -#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI4 (0x10) -#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI5 (0x20) - -/* Bit definitions and macros for MCF_GPIO_PDDR_TIMER */ -#define MCF_GPIO_PDDR_TIMER_PDDR_TIMER0 (0x01) -#define MCF_GPIO_PDDR_TIMER_PDDR_TIMER1 (0x02) -#define MCF_GPIO_PDDR_TIMER_PDDR_TIMER2 (0x04) -#define MCF_GPIO_PDDR_TIMER_PDDR_TIMER3 (0x08) - -/* Bit definitions and macros for MCF_GPIO_PDDR_LCDDATAH */ -#define MCF_GPIO_PDDR_LCDDATAH_PDDR_LCDDATAH0 (0x01) -#define MCF_GPIO_PDDR_LCDDATAH_PDDR_LCDDATAH1 (0x02) - -/* Bit definitions and macros for MCF_GPIO_PDDR_LCDDATAM */ -#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM0 (0x01) -#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM1 (0x02) -#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM2 (0x04) -#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM3 (0x08) -#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM4 (0x10) -#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM5 (0x20) -#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM6 (0x40) -#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PDDR_LCDDATAL */ -#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL0 (0x01) -#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL1 (0x02) -#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL2 (0x04) -#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL3 (0x08) -#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL4 (0x10) -#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL5 (0x20) -#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL6 (0x40) -#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PDDR_LCDCTLH */ -#define MCF_GPIO_PDDR_LCDCTLH_PDDR_LCDCTLH0 (0x01) - -/* Bit definitions and macros for MCF_GPIO_PDDR_LCDCTLL */ -#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL0 (0x01) -#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL1 (0x02) -#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL2 (0x04) -#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL3 (0x08) -#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL4 (0x10) -#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL5 (0x20) -#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL6 (0x40) -#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PPDSDR_FECH */ -#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH0 (0x01) -#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH1 (0x02) -#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH2 (0x04) -#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH3 (0x08) -#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH4 (0x10) -#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH5 (0x20) -#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH6 (0x40) -#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PPDSDR_FECL */ -#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL0 (0x01) -#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL1 (0x02) -#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL2 (0x04) -#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL3 (0x08) -#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL4 (0x10) -#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL5 (0x20) -#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL6 (0x40) -#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PPDSDR_SSI */ -#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI0 (0x01) -#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI1 (0x02) -#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI2 (0x04) -#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI3 (0x08) -#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI4 (0x10) - -/* Bit definitions and macros for MCF_GPIO_PPDSDR_BUSCTL */ -#define MCF_GPIO_PPDSDR_BUSCTL_POSDR_BUSCTL0 (0x01) -#define MCF_GPIO_PPDSDR_BUSCTL_PPDSDR_BUSCTL1 (0x02) -#define MCF_GPIO_PPDSDR_BUSCTL_PPDSDR_BUSCTL2 (0x04) -#define MCF_GPIO_PPDSDR_BUSCTL_PPDSDR_BUSCTL3 (0x08) - -/* Bit definitions and macros for MCF_GPIO_PPDSDR_BE */ -#define MCF_GPIO_PPDSDR_BE_PPDSDR_BE0 (0x01) -#define MCF_GPIO_PPDSDR_BE_PPDSDR_BE1 (0x02) -#define MCF_GPIO_PPDSDR_BE_PPDSDR_BE2 (0x04) -#define MCF_GPIO_PPDSDR_BE_PPDSDR_BE3 (0x08) - -/* Bit definitions and macros for MCF_GPIO_PPDSDR_CS */ -#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS1 (0x02) -#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS2 (0x04) -#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS3 (0x08) -#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS4 (0x10) -#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS5 (0x20) - -/* Bit definitions and macros for MCF_GPIO_PPDSDR_PWM */ -#define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM2 (0x04) -#define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM3 (0x08) -#define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM4 (0x10) -#define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM5 (0x20) - -/* Bit definitions and macros for MCF_GPIO_PPDSDR_FECI2C */ -#define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C0 (0x01) -#define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C1 (0x02) -#define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C2 (0x04) -#define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C3 (0x08) - -/* Bit definitions and macros for MCF_GPIO_PPDSDR_UART */ -#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART0 (0x01) -#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART1 (0x02) -#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART2 (0x04) -#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART3 (0x08) -#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART4 (0x10) -#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART5 (0x20) -#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART6 (0x40) -#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PPDSDR_QSPI */ -#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI0 (0x01) -#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI1 (0x02) -#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI2 (0x04) -#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI3 (0x08) -#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI4 (0x10) -#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI5 (0x20) - -/* Bit definitions and macros for MCF_GPIO_PPDSDR_TIMER */ -#define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER0 (0x01) -#define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER1 (0x02) -#define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER2 (0x04) -#define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER3 (0x08) - -/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDDATAH */ -#define MCF_GPIO_PPDSDR_LCDDATAH_PPDSDR_LCDDATAH0 (0x01) -#define MCF_GPIO_PPDSDR_LCDDATAH_PPDSDR_LCDDATAH1 (0x02) - -/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDDATAM */ -#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM0 (0x01) -#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM1 (0x02) -#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM2 (0x04) -#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM3 (0x08) -#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM4 (0x10) -#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM5 (0x20) -#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM6 (0x40) -#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDDATAL */ -#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL0 (0x01) -#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL1 (0x02) -#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL2 (0x04) -#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL3 (0x08) -#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL4 (0x10) -#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL5 (0x20) -#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL6 (0x40) -#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDCTLH */ -#define MCF_GPIO_PPDSDR_LCDCTLH_PPDSDR_LCDCTLH0 (0x01) - -/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDCTLL */ -#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL0 (0x01) -#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL1 (0x02) -#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL2 (0x04) -#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL3 (0x08) -#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL4 (0x10) -#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL5 (0x20) -#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL6 (0x40) -#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PCLRR_FECH */ -#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH0 (0x01) -#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH1 (0x02) -#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH2 (0x04) -#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH3 (0x08) -#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH4 (0x10) -#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH5 (0x20) -#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH6 (0x40) -#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PCLRR_FECL */ -#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL0 (0x01) -#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL1 (0x02) -#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL2 (0x04) -#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL3 (0x08) -#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL4 (0x10) -#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL5 (0x20) -#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL6 (0x40) -#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PCLRR_SSI */ -#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI0 (0x01) -#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI1 (0x02) -#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI2 (0x04) -#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI3 (0x08) -#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI4 (0x10) - -/* Bit definitions and macros for MCF_GPIO_PCLRR_BUSCTL */ -#define MCF_GPIO_PCLRR_BUSCTL_POSDR_BUSCTL0 (0x01) -#define MCF_GPIO_PCLRR_BUSCTL_PCLRR_BUSCTL1 (0x02) -#define MCF_GPIO_PCLRR_BUSCTL_PCLRR_BUSCTL2 (0x04) -#define MCF_GPIO_PCLRR_BUSCTL_PCLRR_BUSCTL3 (0x08) - -/* Bit definitions and macros for MCF_GPIO_PCLRR_BE */ -#define MCF_GPIO_PCLRR_BE_PCLRR_BE0 (0x01) -#define MCF_GPIO_PCLRR_BE_PCLRR_BE1 (0x02) -#define MCF_GPIO_PCLRR_BE_PCLRR_BE2 (0x04) -#define MCF_GPIO_PCLRR_BE_PCLRR_BE3 (0x08) - -/* Bit definitions and macros for MCF_GPIO_PCLRR_CS */ -#define MCF_GPIO_PCLRR_CS_PCLRR_CS1 (0x02) -#define MCF_GPIO_PCLRR_CS_PCLRR_CS2 (0x04) -#define MCF_GPIO_PCLRR_CS_PCLRR_CS3 (0x08) -#define MCF_GPIO_PCLRR_CS_PCLRR_CS4 (0x10) -#define MCF_GPIO_PCLRR_CS_PCLRR_CS5 (0x20) - -/* Bit definitions and macros for MCF_GPIO_PCLRR_PWM */ -#define MCF_GPIO_PCLRR_PWM_PCLRR_PWM2 (0x04) -#define MCF_GPIO_PCLRR_PWM_PCLRR_PWM3 (0x08) -#define MCF_GPIO_PCLRR_PWM_PCLRR_PWM4 (0x10) -#define MCF_GPIO_PCLRR_PWM_PCLRR_PWM5 (0x20) - -/* Bit definitions and macros for MCF_GPIO_PCLRR_FECI2C */ -#define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C0 (0x01) -#define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C1 (0x02) -#define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C2 (0x04) -#define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C3 (0x08) - -/* Bit definitions and macros for MCF_GPIO_PCLRR_UART */ -#define MCF_GPIO_PCLRR_UART_PCLRR_UART0 (0x01) -#define MCF_GPIO_PCLRR_UART_PCLRR_UART1 (0x02) -#define MCF_GPIO_PCLRR_UART_PCLRR_UART2 (0x04) -#define MCF_GPIO_PCLRR_UART_PCLRR_UART3 (0x08) -#define MCF_GPIO_PCLRR_UART_PCLRR_UART4 (0x10) -#define MCF_GPIO_PCLRR_UART_PCLRR_UART5 (0x20) -#define MCF_GPIO_PCLRR_UART_PCLRR_UART6 (0x40) -#define MCF_GPIO_PCLRR_UART_PCLRR_UART7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PCLRR_QSPI */ -#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI0 (0x01) -#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI1 (0x02) -#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI2 (0x04) -#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI3 (0x08) -#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI4 (0x10) -#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI5 (0x20) - -/* Bit definitions and macros for MCF_GPIO_PCLRR_TIMER */ -#define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER0 (0x01) -#define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER1 (0x02) -#define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER2 (0x04) -#define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER3 (0x08) - -/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDDATAH */ -#define MCF_GPIO_PCLRR_LCDDATAH_PCLRR_LCDDATAH0 (0x01) -#define MCF_GPIO_PCLRR_LCDDATAH_PCLRR_LCDDATAH1 (0x02) - -/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDDATAM */ -#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM0 (0x01) -#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM1 (0x02) -#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM2 (0x04) -#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM3 (0x08) -#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM4 (0x10) -#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM5 (0x20) -#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM6 (0x40) -#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDDATAL */ -#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL0 (0x01) -#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL1 (0x02) -#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL2 (0x04) -#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL3 (0x08) -#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL4 (0x10) -#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL5 (0x20) -#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL6 (0x40) -#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDCTLH */ -#define MCF_GPIO_PCLRR_LCDCTLH_PCLRR_LCDCTLH0 (0x01) - -/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDCTLL */ -#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL0 (0x01) -#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL1 (0x02) -#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL2 (0x04) -#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL3 (0x08) -#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL4 (0x10) -#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL5 (0x20) -#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL6 (0x40) -#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL7 (0x80) - -/* Bit definitions and macros for MCF_GPIO_PAR_FEC */ -#define MCF_GPIO_PAR_FEC_PAR_FEC_MII(x) (((x)&0x03)<<0) -#define MCF_GPIO_PAR_FEC_PAR_FEC_7W(x) (((x)&0x03)<<2) -#define MCF_GPIO_PAR_FEC_PAR_FEC_7W_GPIO (0x00) -#define MCF_GPIO_PAR_FEC_PAR_FEC_7W_URTS1 (0x04) -#define MCF_GPIO_PAR_FEC_PAR_FEC_7W_FEC (0x0C) -#define MCF_GPIO_PAR_FEC_PAR_FEC_MII_GPIO (0x00) -#define MCF_GPIO_PAR_FEC_PAR_FEC_MII_UART (0x01) -#define MCF_GPIO_PAR_FEC_PAR_FEC_MII_FEC (0x03) - -/* Bit definitions and macros for MCF_GPIO_PAR_PWM */ -#define MCF_GPIO_PAR_PWM_PAR_PWM1(x) (((x)&0x03)<<0) -#define MCF_GPIO_PAR_PWM_PAR_PWM3(x) (((x)&0x03)<<2) -#define MCF_GPIO_PAR_PWM_PAR_PWM5 (0x10) -#define MCF_GPIO_PAR_PWM_PAR_PWM7 (0x20) - -/* Bit definitions and macros for MCF_GPIO_PAR_BUSCTL */ -#define MCF_GPIO_PAR_BUSCTL_PAR_TS(x) (((x)&0x03)<<3) -#define MCF_GPIO_PAR_BUSCTL_PAR_RWB (0x20) -#define MCF_GPIO_PAR_BUSCTL_PAR_TA (0x40) -#define MCF_GPIO_PAR_BUSCTL_PAR_OE (0x80) -#define MCF_GPIO_PAR_BUSCTL_PAR_OE_GPIO (0x00) -#define MCF_GPIO_PAR_BUSCTL_PAR_OE_OE (0x80) -#define MCF_GPIO_PAR_BUSCTL_PAR_TA_GPIO (0x00) -#define MCF_GPIO_PAR_BUSCTL_PAR_TA_TA (0x40) -#define MCF_GPIO_PAR_BUSCTL_PAR_RWB_GPIO (0x00) -#define MCF_GPIO_PAR_BUSCTL_PAR_RWB_RWB (0x20) -#define MCF_GPIO_PAR_BUSCTL_PAR_TS_GPIO (0x00) -#define MCF_GPIO_PAR_BUSCTL_PAR_TS_DACK0 (0x10) -#define MCF_GPIO_PAR_BUSCTL_PAR_TS_TS (0x18) - -/* Bit definitions and macros for MCF_GPIO_PAR_FECI2C */ -#define MCF_GPIO_PAR_FECI2C_PAR_SDA(x) (((x)&0x03)<<0) -#define MCF_GPIO_PAR_FECI2C_PAR_SCL(x) (((x)&0x03)<<2) -#define MCF_GPIO_PAR_FECI2C_PAR_MDIO(x) (((x)&0x03)<<4) -#define MCF_GPIO_PAR_FECI2C_PAR_MDC(x) (((x)&0x03)<<6) -#define MCF_GPIO_PAR_FECI2C_PAR_MDC_GPIO (0x00) -#define MCF_GPIO_PAR_FECI2C_PAR_MDC_UTXD2 (0x40) -#define MCF_GPIO_PAR_FECI2C_PAR_MDC_SCL (0x80) -#define MCF_GPIO_PAR_FECI2C_PAR_MDC_EMDC (0xC0) -#define MCF_GPIO_PAR_FECI2C_PAR_MDIO_GPIO (0x00) -#define MCF_GPIO_PAR_FECI2C_PAR_MDIO_URXD2 (0x10) -#define MCF_GPIO_PAR_FECI2C_PAR_MDIO_SDA (0x20) -#define MCF_GPIO_PAR_FECI2C_PAR_MDIO_EMDIO (0x30) -#define MCF_GPIO_PAR_FECI2C_PAR_SCL_GPIO (0x00) -#define MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 (0x04) -#define MCF_GPIO_PAR_FECI2C_PAR_SCL_SCL (0x0C) -#define MCF_GPIO_PAR_FECI2C_PAR_SDA_GPIO (0x00) -#define MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2 (0x02) -#define MCF_GPIO_PAR_FECI2C_PAR_SDA_SDA (0x03) - -/* Bit definitions and macros for MCF_GPIO_PAR_BE */ -#define MCF_GPIO_PAR_BE_PAR_BE0 (0x01) -#define MCF_GPIO_PAR_BE_PAR_BE1 (0x02) -#define MCF_GPIO_PAR_BE_PAR_BE2 (0x04) -#define MCF_GPIO_PAR_BE_PAR_BE3 (0x08) - -/* Bit definitions and macros for MCF_GPIO_PAR_CS */ -#define MCF_GPIO_PAR_CS_PAR_CS1 (0x02) -#define MCF_GPIO_PAR_CS_PAR_CS2 (0x04) -#define MCF_GPIO_PAR_CS_PAR_CS3 (0x08) -#define MCF_GPIO_PAR_CS_PAR_CS4 (0x10) -#define MCF_GPIO_PAR_CS_PAR_CS5 (0x20) -#define MCF_GPIO_PAR_CS_PAR_CS_CS1_GPIO (0x00) -#define MCF_GPIO_PAR_CS_PAR_CS_CS1_SDCS1 (0x01) -#define MCF_GPIO_PAR_CS_PAR_CS_CS1_CS1 (0x03) - -/* Bit definitions and macros for MCF_GPIO_PAR_SSI */ -#define MCF_GPIO_PAR_SSI_PAR_MCLK (0x0080) -#define MCF_GPIO_PAR_SSI_PAR_TXD(x) (((x)&0x0003)<<8) -#define MCF_GPIO_PAR_SSI_PAR_RXD(x) (((x)&0x0003)<<10) -#define MCF_GPIO_PAR_SSI_PAR_FS(x) (((x)&0x0003)<<12) -#define MCF_GPIO_PAR_SSI_PAR_BCLK(x) (((x)&0x0003)<<14) - -/* Bit definitions and macros for MCF_GPIO_PAR_UART */ -#define MCF_GPIO_PAR_UART_PAR_UTXD0 (0x0001) -#define MCF_GPIO_PAR_UART_PAR_URXD0 (0x0002) -#define MCF_GPIO_PAR_UART_PAR_URTS0 (0x0004) -#define MCF_GPIO_PAR_UART_PAR_UCTS0 (0x0008) -#define MCF_GPIO_PAR_UART_PAR_UTXD1(x) (((x)&0x0003)<<4) -#define MCF_GPIO_PAR_UART_PAR_URXD1(x) (((x)&0x0003)<<6) -#define MCF_GPIO_PAR_UART_PAR_URTS1(x) (((x)&0x0003)<<8) -#define MCF_GPIO_PAR_UART_PAR_UCTS1(x) (((x)&0x0003)<<10) -#define MCF_GPIO_PAR_UART_PAR_UCTS1_GPIO (0x0000) -#define MCF_GPIO_PAR_UART_PAR_UCTS1_SSI_BCLK (0x0800) -#define MCF_GPIO_PAR_UART_PAR_UCTS1_ULPI_D7 (0x0400) -#define MCF_GPIO_PAR_UART_PAR_UCTS1_UCTS1 (0x0C00) -#define MCF_GPIO_PAR_UART_PAR_URTS1_GPIO (0x0000) -#define MCF_GPIO_PAR_UART_PAR_URTS1_SSI_FS (0x0200) -#define MCF_GPIO_PAR_UART_PAR_URTS1_ULPI_D6 (0x0100) -#define MCF_GPIO_PAR_UART_PAR_URTS1_URTS1 (0x0300) -#define MCF_GPIO_PAR_UART_PAR_URXD1_GPIO (0x0000) -#define MCF_GPIO_PAR_UART_PAR_URXD1_SSI_RXD (0x0080) -#define MCF_GPIO_PAR_UART_PAR_URXD1_ULPI_D5 (0x0040) -#define MCF_GPIO_PAR_UART_PAR_URXD1_URXD1 (0x00C0) -#define MCF_GPIO_PAR_UART_PAR_UTXD1_GPIO (0x0000) -#define MCF_GPIO_PAR_UART_PAR_UTXD1_SSI_TXD (0x0020) -#define MCF_GPIO_PAR_UART_PAR_UTXD1_ULPI_D4 (0x0010) -#define MCF_GPIO_PAR_UART_PAR_UTXD1_UTXD1 (0x0030) - -/* Bit definitions and macros for MCF_GPIO_PAR_QSPI */ -#define MCF_GPIO_PAR_QSPI_PAR_SCK(x) (((x)&0x0003)<<4) -#define MCF_GPIO_PAR_QSPI_PAR_DOUT(x) (((x)&0x0003)<<6) -#define MCF_GPIO_PAR_QSPI_PAR_DIN(x) (((x)&0x0003)<<8) -#define MCF_GPIO_PAR_QSPI_PAR_PCS0(x) (((x)&0x0003)<<10) -#define MCF_GPIO_PAR_QSPI_PAR_PCS1(x) (((x)&0x0003)<<12) -#define MCF_GPIO_PAR_QSPI_PAR_PCS2(x) (((x)&0x0003)<<14) - -/* Bit definitions and macros for MCF_GPIO_PAR_TIMER */ -#define MCF_GPIO_PAR_TIMER_PAR_TIN0(x) (((x)&0x03)<<0) -#define MCF_GPIO_PAR_TIMER_PAR_TIN1(x) (((x)&0x03)<<2) -#define MCF_GPIO_PAR_TIMER_PAR_TIN2(x) (((x)&0x03)<<4) -#define MCF_GPIO_PAR_TIMER_PAR_TIN3(x) (((x)&0x03)<<6) -#define MCF_GPIO_PAR_TIMER_PAR_TIN3_GPIO (0x00) -#define MCF_GPIO_PAR_TIMER_PAR_TIN3_TOUT3 (0x80) -#define MCF_GPIO_PAR_TIMER_PAR_TIN3_URXD2 (0x40) -#define MCF_GPIO_PAR_TIMER_PAR_TIN3_TIN3 (0xC0) -#define MCF_GPIO_PAR_TIMER_PAR_TIN2_GPIO (0x00) -#define MCF_GPIO_PAR_TIMER_PAR_TIN2_TOUT2 (0x20) -#define MCF_GPIO_PAR_TIMER_PAR_TIN2_UTXD2 (0x10) -#define MCF_GPIO_PAR_TIMER_PAR_TIN2_TIN2 (0x30) -#define MCF_GPIO_PAR_TIMER_PAR_TIN1_GPIO (0x00) -#define MCF_GPIO_PAR_TIMER_PAR_TIN1_TOUT1 (0x08) -#define MCF_GPIO_PAR_TIMER_PAR_TIN1_DACK1 (0x04) -#define MCF_GPIO_PAR_TIMER_PAR_TIN1_TIN1 (0x0C) -#define MCF_GPIO_PAR_TIMER_PAR_TIN0_GPIO (0x00) -#define MCF_GPIO_PAR_TIMER_PAR_TIN0_TOUT0 (0x02) -#define MCF_GPIO_PAR_TIMER_PAR_TIN0_DREQ0 (0x01) -#define MCF_GPIO_PAR_TIMER_PAR_TIN0_TIN0 (0x03) - -/* Bit definitions and macros for MCF_GPIO_PAR_LCDDATA */ -#define MCF_GPIO_PAR_LCDDATA_PAR_LD7_0(x) (((x)&0x03)<<0) -#define MCF_GPIO_PAR_LCDDATA_PAR_LD15_8(x) (((x)&0x03)<<2) -#define MCF_GPIO_PAR_LCDDATA_PAR_LD16(x) (((x)&0x03)<<4) -#define MCF_GPIO_PAR_LCDDATA_PAR_LD17(x) (((x)&0x03)<<6) - -/* Bit definitions and macros for MCF_GPIO_PAR_LCDCTL */ -#define MCF_GPIO_PAR_LCDCTL_PAR_CLS (0x0001) -#define MCF_GPIO_PAR_LCDCTL_PAR_PS (0x0002) -#define MCF_GPIO_PAR_LCDCTL_PAR_REV (0x0004) -#define MCF_GPIO_PAR_LCDCTL_PAR_SPL_SPR (0x0008) -#define MCF_GPIO_PAR_LCDCTL_PAR_CONTRAST (0x0010) -#define MCF_GPIO_PAR_LCDCTL_PAR_LSCLK (0x0020) -#define MCF_GPIO_PAR_LCDCTL_PAR_LP_HSYNC (0x0040) -#define MCF_GPIO_PAR_LCDCTL_PAR_FLM_VSYNC (0x0080) -#define MCF_GPIO_PAR_LCDCTL_PAR_ACD_OE (0x0100) - -/* Bit definitions and macros for MCF_GPIO_PAR_IRQ */ -#define MCF_GPIO_PAR_IRQ_PAR_IRQ1(x) (((x)&0x0003)<<4) -#define MCF_GPIO_PAR_IRQ_PAR_IRQ2(x) (((x)&0x0003)<<6) -#define MCF_GPIO_PAR_IRQ_PAR_IRQ4(x) (((x)&0x0003)<<8) -#define MCF_GPIO_PAR_IRQ_PAR_IRQ5(x) (((x)&0x0003)<<10) -#define MCF_GPIO_PAR_IRQ_PAR_IRQ6(x) (((x)&0x0003)<<12) - -/* Bit definitions and macros for MCF_GPIO_MSCR_FLEXBUS */ -#define MCF_GPIO_MSCR_FLEXBUS_MSCR_ADDRCTL(x) (((x)&0x03)<<0) -#define MCF_GPIO_MSCR_FLEXBUS_MSCR_DLOWER(x) (((x)&0x03)<<2) -#define MCF_GPIO_MSCR_FLEXBUS_MSCR_DUPPER(x) (((x)&0x03)<<4) - -/* Bit definitions and macros for MCF_GPIO_MSCR_SDRAM */ -#define MCF_GPIO_MSCR_SDRAM_MSCR_SDRAM(x) (((x)&0x03)<<0) -#define MCF_GPIO_MSCR_SDRAM_MSCR_SDCLK(x) (((x)&0x03)<<2) -#define MCF_GPIO_MSCR_SDRAM_MSCR_SDCLKB(x) (((x)&0x03)<<4) - -/* Bit definitions and macros for MCF_GPIO_DSCR_I2C */ -#define MCF_GPIO_DSCR_I2C_I2C_DSE(x) (((x)&0x03)<<0) - -/* Bit definitions and macros for MCF_GPIO_DSCR_PWM */ -#define MCF_GPIO_DSCR_PWM_PWM_DSE(x) (((x)&0x03)<<0) - -/* Bit definitions and macros for MCF_GPIO_DSCR_FEC */ -#define MCF_GPIO_DSCR_FEC_FEC_DSE(x) (((x)&0x03)<<0) - -/* Bit definitions and macros for MCF_GPIO_DSCR_UART */ -#define MCF_GPIO_DSCR_UART_UART0_DSE(x) (((x)&0x03)<<0) -#define MCF_GPIO_DSCR_UART_UART1_DSE(x) (((x)&0x03)<<2) - -/* Bit definitions and macros for MCF_GPIO_DSCR_QSPI */ -#define MCF_GPIO_DSCR_QSPI_QSPI_DSE(x) (((x)&0x03)<<0) - -/* Bit definitions and macros for MCF_GPIO_DSCR_TIMER */ -#define MCF_GPIO_DSCR_TIMER_TIMER_DSE(x) (((x)&0x03)<<0) - -/* Bit definitions and macros for MCF_GPIO_DSCR_SSI */ -#define MCF_GPIO_DSCR_SSI_SSI_DSE(x) (((x)&0x03)<<0) - -/* Bit definitions and macros for MCF_GPIO_DSCR_LCD */ -#define MCF_GPIO_DSCR_LCD_LCD_DSE(x) (((x)&0x03)<<0) - -/* Bit definitions and macros for MCF_GPIO_DSCR_DEBUG */ -#define MCF_GPIO_DSCR_DEBUG_DEBUG_DSE(x) (((x)&0x03)<<0) - -/* Bit definitions and macros for MCF_GPIO_DSCR_CLKRST */ -#define MCF_GPIO_DSCR_CLKRST_CLKRST_DSE(x) (((x)&0x03)<<0) - -/* Bit definitions and macros for MCF_GPIO_DSCR_IRQ */ -#define MCF_GPIO_DSCR_IRQ_IRQ_DSE(x) (((x)&0x03)<<0) - -/********************************************************************* - * - * Interrupt Controller (INTC) - * - *********************************************************************/ - -/* Register read/write macros */ -#define MCF_INTC0_IPRH MCF_REG32(0xFC048000) -#define MCF_INTC0_IPRL MCF_REG32(0xFC048004) -#define MCF_INTC0_IMRH MCF_REG32(0xFC048008) -#define MCF_INTC0_IMRL MCF_REG32(0xFC04800C) -#define MCF_INTC0_INTFRCH MCF_REG32(0xFC048010) -#define MCF_INTC0_INTFRCL MCF_REG32(0xFC048014) -#define MCF_INTC0_ICONFIG MCF_REG16(0xFC04801A) -#define MCF_INTC0_SIMR MCF_REG08(0xFC04801C) -#define MCF_INTC0_CIMR MCF_REG08(0xFC04801D) -#define MCF_INTC0_CLMASK MCF_REG08(0xFC04801E) -#define MCF_INTC0_SLMASK MCF_REG08(0xFC04801F) -#define MCF_INTC0_ICR0 MCF_REG08(0xFC048040) -#define MCF_INTC0_ICR1 MCF_REG08(0xFC048041) -#define MCF_INTC0_ICR2 MCF_REG08(0xFC048042) -#define MCF_INTC0_ICR3 MCF_REG08(0xFC048043) -#define MCF_INTC0_ICR4 MCF_REG08(0xFC048044) -#define MCF_INTC0_ICR5 MCF_REG08(0xFC048045) -#define MCF_INTC0_ICR6 MCF_REG08(0xFC048046) -#define MCF_INTC0_ICR7 MCF_REG08(0xFC048047) -#define MCF_INTC0_ICR8 MCF_REG08(0xFC048048) -#define MCF_INTC0_ICR9 MCF_REG08(0xFC048049) -#define MCF_INTC0_ICR10 MCF_REG08(0xFC04804A) -#define MCF_INTC0_ICR11 MCF_REG08(0xFC04804B) -#define MCF_INTC0_ICR12 MCF_REG08(0xFC04804C) -#define MCF_INTC0_ICR13 MCF_REG08(0xFC04804D) -#define MCF_INTC0_ICR14 MCF_REG08(0xFC04804E) -#define MCF_INTC0_ICR15 MCF_REG08(0xFC04804F) -#define MCF_INTC0_ICR16 MCF_REG08(0xFC048050) -#define MCF_INTC0_ICR17 MCF_REG08(0xFC048051) -#define MCF_INTC0_ICR18 MCF_REG08(0xFC048052) -#define MCF_INTC0_ICR19 MCF_REG08(0xFC048053) -#define MCF_INTC0_ICR20 MCF_REG08(0xFC048054) -#define MCF_INTC0_ICR21 MCF_REG08(0xFC048055) -#define MCF_INTC0_ICR22 MCF_REG08(0xFC048056) -#define MCF_INTC0_ICR23 MCF_REG08(0xFC048057) -#define MCF_INTC0_ICR24 MCF_REG08(0xFC048058) -#define MCF_INTC0_ICR25 MCF_REG08(0xFC048059) -#define MCF_INTC0_ICR26 MCF_REG08(0xFC04805A) -#define MCF_INTC0_ICR27 MCF_REG08(0xFC04805B) -#define MCF_INTC0_ICR28 MCF_REG08(0xFC04805C) -#define MCF_INTC0_ICR29 MCF_REG08(0xFC04805D) -#define MCF_INTC0_ICR30 MCF_REG08(0xFC04805E) -#define MCF_INTC0_ICR31 MCF_REG08(0xFC04805F) -#define MCF_INTC0_ICR32 MCF_REG08(0xFC048060) -#define MCF_INTC0_ICR33 MCF_REG08(0xFC048061) -#define MCF_INTC0_ICR34 MCF_REG08(0xFC048062) -#define MCF_INTC0_ICR35 MCF_REG08(0xFC048063) -#define MCF_INTC0_ICR36 MCF_REG08(0xFC048064) -#define MCF_INTC0_ICR37 MCF_REG08(0xFC048065) -#define MCF_INTC0_ICR38 MCF_REG08(0xFC048066) -#define MCF_INTC0_ICR39 MCF_REG08(0xFC048067) -#define MCF_INTC0_ICR40 MCF_REG08(0xFC048068) -#define MCF_INTC0_ICR41 MCF_REG08(0xFC048069) -#define MCF_INTC0_ICR42 MCF_REG08(0xFC04806A) -#define MCF_INTC0_ICR43 MCF_REG08(0xFC04806B) -#define MCF_INTC0_ICR44 MCF_REG08(0xFC04806C) -#define MCF_INTC0_ICR45 MCF_REG08(0xFC04806D) -#define MCF_INTC0_ICR46 MCF_REG08(0xFC04806E) -#define MCF_INTC0_ICR47 MCF_REG08(0xFC04806F) -#define MCF_INTC0_ICR48 MCF_REG08(0xFC048070) -#define MCF_INTC0_ICR49 MCF_REG08(0xFC048071) -#define MCF_INTC0_ICR50 MCF_REG08(0xFC048072) -#define MCF_INTC0_ICR51 MCF_REG08(0xFC048073) -#define MCF_INTC0_ICR52 MCF_REG08(0xFC048074) -#define MCF_INTC0_ICR53 MCF_REG08(0xFC048075) -#define MCF_INTC0_ICR54 MCF_REG08(0xFC048076) -#define MCF_INTC0_ICR55 MCF_REG08(0xFC048077) -#define MCF_INTC0_ICR56 MCF_REG08(0xFC048078) -#define MCF_INTC0_ICR57 MCF_REG08(0xFC048079) -#define MCF_INTC0_ICR58 MCF_REG08(0xFC04807A) -#define MCF_INTC0_ICR59 MCF_REG08(0xFC04807B) -#define MCF_INTC0_ICR60 MCF_REG08(0xFC04807C) -#define MCF_INTC0_ICR61 MCF_REG08(0xFC04807D) -#define MCF_INTC0_ICR62 MCF_REG08(0xFC04807E) -#define MCF_INTC0_ICR63 MCF_REG08(0xFC04807F) -#define MCF_INTC0_ICR(x) MCF_REG08(0xFC048040+((x)*0x001)) -#define MCF_INTC0_SWIACK MCF_REG08(0xFC0480E0) -#define MCF_INTC0_L1IACK MCF_REG08(0xFC0480E4) -#define MCF_INTC0_L2IACK MCF_REG08(0xFC0480E8) -#define MCF_INTC0_L3IACK MCF_REG08(0xFC0480EC) -#define MCF_INTC0_L4IACK MCF_REG08(0xFC0480F0) -#define MCF_INTC0_L5IACK MCF_REG08(0xFC0480F4) -#define MCF_INTC0_L6IACK MCF_REG08(0xFC0480F8) -#define MCF_INTC0_L7IACK MCF_REG08(0xFC0480FC) -#define MCF_INTC0_LIACK(x) MCF_REG08(0xFC0480E4+((x)*0x004)) -#define MCF_INTC1_IPRH MCF_REG32(0xFC04C000) -#define MCF_INTC1_IPRL MCF_REG32(0xFC04C004) -#define MCF_INTC1_IMRH MCF_REG32(0xFC04C008) -#define MCF_INTC1_IMRL MCF_REG32(0xFC04C00C) -#define MCF_INTC1_INTFRCH MCF_REG32(0xFC04C010) -#define MCF_INTC1_INTFRCL MCF_REG32(0xFC04C014) -#define MCF_INTC1_ICONFIG MCF_REG16(0xFC04C01A) -#define MCF_INTC1_SIMR MCF_REG08(0xFC04C01C) -#define MCF_INTC1_CIMR MCF_REG08(0xFC04C01D) -#define MCF_INTC1_CLMASK MCF_REG08(0xFC04C01E) -#define MCF_INTC1_SLMASK MCF_REG08(0xFC04C01F) -#define MCF_INTC1_ICR0 MCF_REG08(0xFC04C040) -#define MCF_INTC1_ICR1 MCF_REG08(0xFC04C041) -#define MCF_INTC1_ICR2 MCF_REG08(0xFC04C042) -#define MCF_INTC1_ICR3 MCF_REG08(0xFC04C043) -#define MCF_INTC1_ICR4 MCF_REG08(0xFC04C044) -#define MCF_INTC1_ICR5 MCF_REG08(0xFC04C045) -#define MCF_INTC1_ICR6 MCF_REG08(0xFC04C046) -#define MCF_INTC1_ICR7 MCF_REG08(0xFC04C047) -#define MCF_INTC1_ICR8 MCF_REG08(0xFC04C048) -#define MCF_INTC1_ICR9 MCF_REG08(0xFC04C049) -#define MCF_INTC1_ICR10 MCF_REG08(0xFC04C04A) -#define MCF_INTC1_ICR11 MCF_REG08(0xFC04C04B) -#define MCF_INTC1_ICR12 MCF_REG08(0xFC04C04C) -#define MCF_INTC1_ICR13 MCF_REG08(0xFC04C04D) -#define MCF_INTC1_ICR14 MCF_REG08(0xFC04C04E) -#define MCF_INTC1_ICR15 MCF_REG08(0xFC04C04F) -#define MCF_INTC1_ICR16 MCF_REG08(0xFC04C050) -#define MCF_INTC1_ICR17 MCF_REG08(0xFC04C051) -#define MCF_INTC1_ICR18 MCF_REG08(0xFC04C052) -#define MCF_INTC1_ICR19 MCF_REG08(0xFC04C053) -#define MCF_INTC1_ICR20 MCF_REG08(0xFC04C054) -#define MCF_INTC1_ICR21 MCF_REG08(0xFC04C055) -#define MCF_INTC1_ICR22 MCF_REG08(0xFC04C056) -#define MCF_INTC1_ICR23 MCF_REG08(0xFC04C057) -#define MCF_INTC1_ICR24 MCF_REG08(0xFC04C058) -#define MCF_INTC1_ICR25 MCF_REG08(0xFC04C059) -#define MCF_INTC1_ICR26 MCF_REG08(0xFC04C05A) -#define MCF_INTC1_ICR27 MCF_REG08(0xFC04C05B) -#define MCF_INTC1_ICR28 MCF_REG08(0xFC04C05C) -#define MCF_INTC1_ICR29 MCF_REG08(0xFC04C05D) -#define MCF_INTC1_ICR30 MCF_REG08(0xFC04C05E) -#define MCF_INTC1_ICR31 MCF_REG08(0xFC04C05F) -#define MCF_INTC1_ICR32 MCF_REG08(0xFC04C060) -#define MCF_INTC1_ICR33 MCF_REG08(0xFC04C061) -#define MCF_INTC1_ICR34 MCF_REG08(0xFC04C062) -#define MCF_INTC1_ICR35 MCF_REG08(0xFC04C063) -#define MCF_INTC1_ICR36 MCF_REG08(0xFC04C064) -#define MCF_INTC1_ICR37 MCF_REG08(0xFC04C065) -#define MCF_INTC1_ICR38 MCF_REG08(0xFC04C066) -#define MCF_INTC1_ICR39 MCF_REG08(0xFC04C067) -#define MCF_INTC1_ICR40 MCF_REG08(0xFC04C068) -#define MCF_INTC1_ICR41 MCF_REG08(0xFC04C069) -#define MCF_INTC1_ICR42 MCF_REG08(0xFC04C06A) -#define MCF_INTC1_ICR43 MCF_REG08(0xFC04C06B) -#define MCF_INTC1_ICR44 MCF_REG08(0xFC04C06C) -#define MCF_INTC1_ICR45 MCF_REG08(0xFC04C06D) -#define MCF_INTC1_ICR46 MCF_REG08(0xFC04C06E) -#define MCF_INTC1_ICR47 MCF_REG08(0xFC04C06F) -#define MCF_INTC1_ICR48 MCF_REG08(0xFC04C070) -#define MCF_INTC1_ICR49 MCF_REG08(0xFC04C071) -#define MCF_INTC1_ICR50 MCF_REG08(0xFC04C072) -#define MCF_INTC1_ICR51 MCF_REG08(0xFC04C073) -#define MCF_INTC1_ICR52 MCF_REG08(0xFC04C074) -#define MCF_INTC1_ICR53 MCF_REG08(0xFC04C075) -#define MCF_INTC1_ICR54 MCF_REG08(0xFC04C076) -#define MCF_INTC1_ICR55 MCF_REG08(0xFC04C077) -#define MCF_INTC1_ICR56 MCF_REG08(0xFC04C078) -#define MCF_INTC1_ICR57 MCF_REG08(0xFC04C079) -#define MCF_INTC1_ICR58 MCF_REG08(0xFC04C07A) -#define MCF_INTC1_ICR59 MCF_REG08(0xFC04C07B) -#define MCF_INTC1_ICR60 MCF_REG08(0xFC04C07C) -#define MCF_INTC1_ICR61 MCF_REG08(0xFC04C07D) -#define MCF_INTC1_ICR62 MCF_REG08(0xFC04C07E) -#define MCF_INTC1_ICR63 MCF_REG08(0xFC04C07F) -#define MCF_INTC1_ICR(x) MCF_REG08(0xFC04C040+((x)*0x001)) -#define MCF_INTC1_SWIACK MCF_REG08(0xFC04C0E0) -#define MCF_INTC1_L1IACK MCF_REG08(0xFC04C0E4) -#define MCF_INTC1_L2IACK MCF_REG08(0xFC04C0E8) -#define MCF_INTC1_L3IACK MCF_REG08(0xFC04C0EC) -#define MCF_INTC1_L4IACK MCF_REG08(0xFC04C0F0) -#define MCF_INTC1_L5IACK MCF_REG08(0xFC04C0F4) -#define MCF_INTC1_L6IACK MCF_REG08(0xFC04C0F8) -#define MCF_INTC1_L7IACK MCF_REG08(0xFC04C0FC) -#define MCF_INTC1_LIACK(x) MCF_REG08(0xFC04C0E4+((x)*0x004)) -#define MCF_INTC_IPRH(x) MCF_REG32(0xFC048000+((x)*0x4000)) -#define MCF_INTC_IPRL(x) MCF_REG32(0xFC048004+((x)*0x4000)) -#define MCF_INTC_IMRH(x) MCF_REG32(0xFC048008+((x)*0x4000)) -#define MCF_INTC_IMRL(x) MCF_REG32(0xFC04800C+((x)*0x4000)) -#define MCF_INTC_INTFRCH(x) MCF_REG32(0xFC048010+((x)*0x4000)) -#define MCF_INTC_INTFRCL(x) MCF_REG32(0xFC048014+((x)*0x4000)) -#define MCF_INTC_ICONFIG(x) MCF_REG16(0xFC04801A+((x)*0x4000)) -#define MCF_INTC_SIMR(x) MCF_REG08(0xFC04801C+((x)*0x4000)) -#define MCF_INTC_CIMR(x) MCF_REG08(0xFC04801D+((x)*0x4000)) -#define MCF_INTC_CLMASK(x) MCF_REG08(0xFC04801E+((x)*0x4000)) -#define MCF_INTC_SLMASK(x) MCF_REG08(0xFC04801F+((x)*0x4000)) -#define MCF_INTC_ICR0(x) MCF_REG08(0xFC048040+((x)*0x4000)) -#define MCF_INTC_ICR1(x) MCF_REG08(0xFC048041+((x)*0x4000)) -#define MCF_INTC_ICR2(x) MCF_REG08(0xFC048042+((x)*0x4000)) -#define MCF_INTC_ICR3(x) MCF_REG08(0xFC048043+((x)*0x4000)) -#define MCF_INTC_ICR4(x) MCF_REG08(0xFC048044+((x)*0x4000)) -#define MCF_INTC_ICR5(x) MCF_REG08(0xFC048045+((x)*0x4000)) -#define MCF_INTC_ICR6(x) MCF_REG08(0xFC048046+((x)*0x4000)) -#define MCF_INTC_ICR7(x) MCF_REG08(0xFC048047+((x)*0x4000)) -#define MCF_INTC_ICR8(x) MCF_REG08(0xFC048048+((x)*0x4000)) -#define MCF_INTC_ICR9(x) MCF_REG08(0xFC048049+((x)*0x4000)) -#define MCF_INTC_ICR10(x) MCF_REG08(0xFC04804A+((x)*0x4000)) -#define MCF_INTC_ICR11(x) MCF_REG08(0xFC04804B+((x)*0x4000)) -#define MCF_INTC_ICR12(x) MCF_REG08(0xFC04804C+((x)*0x4000)) -#define MCF_INTC_ICR13(x) MCF_REG08(0xFC04804D+((x)*0x4000)) -#define MCF_INTC_ICR14(x) MCF_REG08(0xFC04804E+((x)*0x4000)) -#define MCF_INTC_ICR15(x) MCF_REG08(0xFC04804F+((x)*0x4000)) -#define MCF_INTC_ICR16(x) MCF_REG08(0xFC048050+((x)*0x4000)) -#define MCF_INTC_ICR17(x) MCF_REG08(0xFC048051+((x)*0x4000)) -#define MCF_INTC_ICR18(x) MCF_REG08(0xFC048052+((x)*0x4000)) -#define MCF_INTC_ICR19(x) MCF_REG08(0xFC048053+((x)*0x4000)) -#define MCF_INTC_ICR20(x) MCF_REG08(0xFC048054+((x)*0x4000)) -#define MCF_INTC_ICR21(x) MCF_REG08(0xFC048055+((x)*0x4000)) -#define MCF_INTC_ICR22(x) MCF_REG08(0xFC048056+((x)*0x4000)) -#define MCF_INTC_ICR23(x) MCF_REG08(0xFC048057+((x)*0x4000)) -#define MCF_INTC_ICR24(x) MCF_REG08(0xFC048058+((x)*0x4000)) -#define MCF_INTC_ICR25(x) MCF_REG08(0xFC048059+((x)*0x4000)) -#define MCF_INTC_ICR26(x) MCF_REG08(0xFC04805A+((x)*0x4000)) -#define MCF_INTC_ICR27(x) MCF_REG08(0xFC04805B+((x)*0x4000)) -#define MCF_INTC_ICR28(x) MCF_REG08(0xFC04805C+((x)*0x4000)) -#define MCF_INTC_ICR29(x) MCF_REG08(0xFC04805D+((x)*0x4000)) -#define MCF_INTC_ICR30(x) MCF_REG08(0xFC04805E+((x)*0x4000)) -#define MCF_INTC_ICR31(x) MCF_REG08(0xFC04805F+((x)*0x4000)) -#define MCF_INTC_ICR32(x) MCF_REG08(0xFC048060+((x)*0x4000)) -#define MCF_INTC_ICR33(x) MCF_REG08(0xFC048061+((x)*0x4000)) -#define MCF_INTC_ICR34(x) MCF_REG08(0xFC048062+((x)*0x4000)) -#define MCF_INTC_ICR35(x) MCF_REG08(0xFC048063+((x)*0x4000)) -#define MCF_INTC_ICR36(x) MCF_REG08(0xFC048064+((x)*0x4000)) -#define MCF_INTC_ICR37(x) MCF_REG08(0xFC048065+((x)*0x4000)) -#define MCF_INTC_ICR38(x) MCF_REG08(0xFC048066+((x)*0x4000)) -#define MCF_INTC_ICR39(x) MCF_REG08(0xFC048067+((x)*0x4000)) -#define MCF_INTC_ICR40(x) MCF_REG08(0xFC048068+((x)*0x4000)) -#define MCF_INTC_ICR41(x) MCF_REG08(0xFC048069+((x)*0x4000)) -#define MCF_INTC_ICR42(x) MCF_REG08(0xFC04806A+((x)*0x4000)) -#define MCF_INTC_ICR43(x) MCF_REG08(0xFC04806B+((x)*0x4000)) -#define MCF_INTC_ICR44(x) MCF_REG08(0xFC04806C+((x)*0x4000)) -#define MCF_INTC_ICR45(x) MCF_REG08(0xFC04806D+((x)*0x4000)) -#define MCF_INTC_ICR46(x) MCF_REG08(0xFC04806E+((x)*0x4000)) -#define MCF_INTC_ICR47(x) MCF_REG08(0xFC04806F+((x)*0x4000)) -#define MCF_INTC_ICR48(x) MCF_REG08(0xFC048070+((x)*0x4000)) -#define MCF_INTC_ICR49(x) MCF_REG08(0xFC048071+((x)*0x4000)) -#define MCF_INTC_ICR50(x) MCF_REG08(0xFC048072+((x)*0x4000)) -#define MCF_INTC_ICR51(x) MCF_REG08(0xFC048073+((x)*0x4000)) -#define MCF_INTC_ICR52(x) MCF_REG08(0xFC048074+((x)*0x4000)) -#define MCF_INTC_ICR53(x) MCF_REG08(0xFC048075+((x)*0x4000)) -#define MCF_INTC_ICR54(x) MCF_REG08(0xFC048076+((x)*0x4000)) -#define MCF_INTC_ICR55(x) MCF_REG08(0xFC048077+((x)*0x4000)) -#define MCF_INTC_ICR56(x) MCF_REG08(0xFC048078+((x)*0x4000)) -#define MCF_INTC_ICR57(x) MCF_REG08(0xFC048079+((x)*0x4000)) -#define MCF_INTC_ICR58(x) MCF_REG08(0xFC04807A+((x)*0x4000)) -#define MCF_INTC_ICR59(x) MCF_REG08(0xFC04807B+((x)*0x4000)) -#define MCF_INTC_ICR60(x) MCF_REG08(0xFC04807C+((x)*0x4000)) -#define MCF_INTC_ICR61(x) MCF_REG08(0xFC04807D+((x)*0x4000)) -#define MCF_INTC_ICR62(x) MCF_REG08(0xFC04807E+((x)*0x4000)) -#define MCF_INTC_ICR63(x) MCF_REG08(0xFC04807F+((x)*0x4000)) -#define MCF_INTC_SWIACK(x) MCF_REG08(0xFC0480E0+((x)*0x4000)) -#define MCF_INTC_L1IACK(x) MCF_REG08(0xFC0480E4+((x)*0x4000)) -#define MCF_INTC_L2IACK(x) MCF_REG08(0xFC0480E8+((x)*0x4000)) -#define MCF_INTC_L3IACK(x) MCF_REG08(0xFC0480EC+((x)*0x4000)) -#define MCF_INTC_L4IACK(x) MCF_REG08(0xFC0480F0+((x)*0x4000)) -#define MCF_INTC_L5IACK(x) MCF_REG08(0xFC0480F4+((x)*0x4000)) -#define MCF_INTC_L6IACK(x) MCF_REG08(0xFC0480F8+((x)*0x4000)) -#define MCF_INTC_L7IACK(x) MCF_REG08(0xFC0480FC+((x)*0x4000)) - -/* Bit definitions and macros for MCF_INTC_IPRH */ -#define MCF_INTC_IPRH_INT32 (0x00000001) -#define MCF_INTC_IPRH_INT33 (0x00000002) -#define MCF_INTC_IPRH_INT34 (0x00000004) -#define MCF_INTC_IPRH_INT35 (0x00000008) -#define MCF_INTC_IPRH_INT36 (0x00000010) -#define MCF_INTC_IPRH_INT37 (0x00000020) -#define MCF_INTC_IPRH_INT38 (0x00000040) -#define MCF_INTC_IPRH_INT39 (0x00000080) -#define MCF_INTC_IPRH_INT40 (0x00000100) -#define MCF_INTC_IPRH_INT41 (0x00000200) -#define MCF_INTC_IPRH_INT42 (0x00000400) -#define MCF_INTC_IPRH_INT43 (0x00000800) -#define MCF_INTC_IPRH_INT44 (0x00001000) -#define MCF_INTC_IPRH_INT45 (0x00002000) -#define MCF_INTC_IPRH_INT46 (0x00004000) -#define MCF_INTC_IPRH_INT47 (0x00008000) -#define MCF_INTC_IPRH_INT48 (0x00010000) -#define MCF_INTC_IPRH_INT49 (0x00020000) -#define MCF_INTC_IPRH_INT50 (0x00040000) -#define MCF_INTC_IPRH_INT51 (0x00080000) -#define MCF_INTC_IPRH_INT52 (0x00100000) -#define MCF_INTC_IPRH_INT53 (0x00200000) -#define MCF_INTC_IPRH_INT54 (0x00400000) -#define MCF_INTC_IPRH_INT55 (0x00800000) -#define MCF_INTC_IPRH_INT56 (0x01000000) -#define MCF_INTC_IPRH_INT57 (0x02000000) -#define MCF_INTC_IPRH_INT58 (0x04000000) -#define MCF_INTC_IPRH_INT59 (0x08000000) -#define MCF_INTC_IPRH_INT60 (0x10000000) -#define MCF_INTC_IPRH_INT61 (0x20000000) -#define MCF_INTC_IPRH_INT62 (0x40000000) -#define MCF_INTC_IPRH_INT63 (0x80000000) - -/* Bit definitions and macros for MCF_INTC_IPRL */ -#define MCF_INTC_IPRL_INT0 (0x00000001) -#define MCF_INTC_IPRL_INT1 (0x00000002) -#define MCF_INTC_IPRL_INT2 (0x00000004) -#define MCF_INTC_IPRL_INT3 (0x00000008) -#define MCF_INTC_IPRL_INT4 (0x00000010) -#define MCF_INTC_IPRL_INT5 (0x00000020) -#define MCF_INTC_IPRL_INT6 (0x00000040) -#define MCF_INTC_IPRL_INT7 (0x00000080) -#define MCF_INTC_IPRL_INT8 (0x00000100) -#define MCF_INTC_IPRL_INT9 (0x00000200) -#define MCF_INTC_IPRL_INT10 (0x00000400) -#define MCF_INTC_IPRL_INT11 (0x00000800) -#define MCF_INTC_IPRL_INT12 (0x00001000) -#define MCF_INTC_IPRL_INT13 (0x00002000) -#define MCF_INTC_IPRL_INT14 (0x00004000) -#define MCF_INTC_IPRL_INT15 (0x00008000) -#define MCF_INTC_IPRL_INT16 (0x00010000) -#define MCF_INTC_IPRL_INT17 (0x00020000) -#define MCF_INTC_IPRL_INT18 (0x00040000) -#define MCF_INTC_IPRL_INT19 (0x00080000) -#define MCF_INTC_IPRL_INT20 (0x00100000) -#define MCF_INTC_IPRL_INT21 (0x00200000) -#define MCF_INTC_IPRL_INT22 (0x00400000) -#define MCF_INTC_IPRL_INT23 (0x00800000) -#define MCF_INTC_IPRL_INT24 (0x01000000) -#define MCF_INTC_IPRL_INT25 (0x02000000) -#define MCF_INTC_IPRL_INT26 (0x04000000) -#define MCF_INTC_IPRL_INT27 (0x08000000) -#define MCF_INTC_IPRL_INT28 (0x10000000) -#define MCF_INTC_IPRL_INT29 (0x20000000) -#define MCF_INTC_IPRL_INT30 (0x40000000) -#define MCF_INTC_IPRL_INT31 (0x80000000) - -/* Bit definitions and macros for MCF_INTC_IMRH */ -#define MCF_INTC_IMRH_INT_MASK32 (0x00000001) -#define MCF_INTC_IMRH_INT_MASK33 (0x00000002) -#define MCF_INTC_IMRH_INT_MASK34 (0x00000004) -#define MCF_INTC_IMRH_INT_MASK35 (0x00000008) -#define MCF_INTC_IMRH_INT_MASK36 (0x00000010) -#define MCF_INTC_IMRH_INT_MASK37 (0x00000020) -#define MCF_INTC_IMRH_INT_MASK38 (0x00000040) -#define MCF_INTC_IMRH_INT_MASK39 (0x00000080) -#define MCF_INTC_IMRH_INT_MASK40 (0x00000100) -#define MCF_INTC_IMRH_INT_MASK41 (0x00000200) -#define MCF_INTC_IMRH_INT_MASK42 (0x00000400) -#define MCF_INTC_IMRH_INT_MASK43 (0x00000800) -#define MCF_INTC_IMRH_INT_MASK44 (0x00001000) -#define MCF_INTC_IMRH_INT_MASK45 (0x00002000) -#define MCF_INTC_IMRH_INT_MASK46 (0x00004000) -#define MCF_INTC_IMRH_INT_MASK47 (0x00008000) -#define MCF_INTC_IMRH_INT_MASK48 (0x00010000) -#define MCF_INTC_IMRH_INT_MASK49 (0x00020000) -#define MCF_INTC_IMRH_INT_MASK50 (0x00040000) -#define MCF_INTC_IMRH_INT_MASK51 (0x00080000) -#define MCF_INTC_IMRH_INT_MASK52 (0x00100000) -#define MCF_INTC_IMRH_INT_MASK53 (0x00200000) -#define MCF_INTC_IMRH_INT_MASK54 (0x00400000) -#define MCF_INTC_IMRH_INT_MASK55 (0x00800000) -#define MCF_INTC_IMRH_INT_MASK56 (0x01000000) -#define MCF_INTC_IMRH_INT_MASK57 (0x02000000) -#define MCF_INTC_IMRH_INT_MASK58 (0x04000000) -#define MCF_INTC_IMRH_INT_MASK59 (0x08000000) -#define MCF_INTC_IMRH_INT_MASK60 (0x10000000) -#define MCF_INTC_IMRH_INT_MASK61 (0x20000000) -#define MCF_INTC_IMRH_INT_MASK62 (0x40000000) -#define MCF_INTC_IMRH_INT_MASK63 (0x80000000) - -/* Bit definitions and macros for MCF_INTC_IMRL */ -#define MCF_INTC_IMRL_INT_MASK0 (0x00000001) -#define MCF_INTC_IMRL_INT_MASK1 (0x00000002) -#define MCF_INTC_IMRL_INT_MASK2 (0x00000004) -#define MCF_INTC_IMRL_INT_MASK3 (0x00000008) -#define MCF_INTC_IMRL_INT_MASK4 (0x00000010) -#define MCF_INTC_IMRL_INT_MASK5 (0x00000020) -#define MCF_INTC_IMRL_INT_MASK6 (0x00000040) -#define MCF_INTC_IMRL_INT_MASK7 (0x00000080) -#define MCF_INTC_IMRL_INT_MASK8 (0x00000100) -#define MCF_INTC_IMRL_INT_MASK9 (0x00000200) -#define MCF_INTC_IMRL_INT_MASK10 (0x00000400) -#define MCF_INTC_IMRL_INT_MASK11 (0x00000800) -#define MCF_INTC_IMRL_INT_MASK12 (0x00001000) -#define MCF_INTC_IMRL_INT_MASK13 (0x00002000) -#define MCF_INTC_IMRL_INT_MASK14 (0x00004000) -#define MCF_INTC_IMRL_INT_MASK15 (0x00008000) -#define MCF_INTC_IMRL_INT_MASK16 (0x00010000) -#define MCF_INTC_IMRL_INT_MASK17 (0x00020000) -#define MCF_INTC_IMRL_INT_MASK18 (0x00040000) -#define MCF_INTC_IMRL_INT_MASK19 (0x00080000) -#define MCF_INTC_IMRL_INT_MASK20 (0x00100000) -#define MCF_INTC_IMRL_INT_MASK21 (0x00200000) -#define MCF_INTC_IMRL_INT_MASK22 (0x00400000) -#define MCF_INTC_IMRL_INT_MASK23 (0x00800000) -#define MCF_INTC_IMRL_INT_MASK24 (0x01000000) -#define MCF_INTC_IMRL_INT_MASK25 (0x02000000) -#define MCF_INTC_IMRL_INT_MASK26 (0x04000000) -#define MCF_INTC_IMRL_INT_MASK27 (0x08000000) -#define MCF_INTC_IMRL_INT_MASK28 (0x10000000) -#define MCF_INTC_IMRL_INT_MASK29 (0x20000000) -#define MCF_INTC_IMRL_INT_MASK30 (0x40000000) -#define MCF_INTC_IMRL_INT_MASK31 (0x80000000) - -/* Bit definitions and macros for MCF_INTC_INTFRCH */ -#define MCF_INTC_INTFRCH_INTFRC32 (0x00000001) -#define MCF_INTC_INTFRCH_INTFRC33 (0x00000002) -#define MCF_INTC_INTFRCH_INTFRC34 (0x00000004) -#define MCF_INTC_INTFRCH_INTFRC35 (0x00000008) -#define MCF_INTC_INTFRCH_INTFRC36 (0x00000010) -#define MCF_INTC_INTFRCH_INTFRC37 (0x00000020) -#define MCF_INTC_INTFRCH_INTFRC38 (0x00000040) -#define MCF_INTC_INTFRCH_INTFRC39 (0x00000080) -#define MCF_INTC_INTFRCH_INTFRC40 (0x00000100) -#define MCF_INTC_INTFRCH_INTFRC41 (0x00000200) -#define MCF_INTC_INTFRCH_INTFRC42 (0x00000400) -#define MCF_INTC_INTFRCH_INTFRC43 (0x00000800) -#define MCF_INTC_INTFRCH_INTFRC44 (0x00001000) -#define MCF_INTC_INTFRCH_INTFRC45 (0x00002000) -#define MCF_INTC_INTFRCH_INTFRC46 (0x00004000) -#define MCF_INTC_INTFRCH_INTFRC47 (0x00008000) -#define MCF_INTC_INTFRCH_INTFRC48 (0x00010000) -#define MCF_INTC_INTFRCH_INTFRC49 (0x00020000) -#define MCF_INTC_INTFRCH_INTFRC50 (0x00040000) -#define MCF_INTC_INTFRCH_INTFRC51 (0x00080000) -#define MCF_INTC_INTFRCH_INTFRC52 (0x00100000) -#define MCF_INTC_INTFRCH_INTFRC53 (0x00200000) -#define MCF_INTC_INTFRCH_INTFRC54 (0x00400000) -#define MCF_INTC_INTFRCH_INTFRC55 (0x00800000) -#define MCF_INTC_INTFRCH_INTFRC56 (0x01000000) -#define MCF_INTC_INTFRCH_INTFRC57 (0x02000000) -#define MCF_INTC_INTFRCH_INTFRC58 (0x04000000) -#define MCF_INTC_INTFRCH_INTFRC59 (0x08000000) -#define MCF_INTC_INTFRCH_INTFRC60 (0x10000000) -#define MCF_INTC_INTFRCH_INTFRC61 (0x20000000) -#define MCF_INTC_INTFRCH_INTFRC62 (0x40000000) -#define MCF_INTC_INTFRCH_INTFRC63 (0x80000000) - -/* Bit definitions and macros for MCF_INTC_INTFRCL */ -#define MCF_INTC_INTFRCL_INTFRC0 (0x00000001) -#define MCF_INTC_INTFRCL_INTFRC1 (0x00000002) -#define MCF_INTC_INTFRCL_INTFRC2 (0x00000004) -#define MCF_INTC_INTFRCL_INTFRC3 (0x00000008) -#define MCF_INTC_INTFRCL_INTFRC4 (0x00000010) -#define MCF_INTC_INTFRCL_INTFRC5 (0x00000020) -#define MCF_INTC_INTFRCL_INTFRC6 (0x00000040) -#define MCF_INTC_INTFRCL_INTFRC7 (0x00000080) -#define MCF_INTC_INTFRCL_INTFRC8 (0x00000100) -#define MCF_INTC_INTFRCL_INTFRC9 (0x00000200) -#define MCF_INTC_INTFRCL_INTFRC10 (0x00000400) -#define MCF_INTC_INTFRCL_INTFRC11 (0x00000800) -#define MCF_INTC_INTFRCL_INTFRC12 (0x00001000) -#define MCF_INTC_INTFRCL_INTFRC13 (0x00002000) -#define MCF_INTC_INTFRCL_INTFRC14 (0x00004000) -#define MCF_INTC_INTFRCL_INTFRC15 (0x00008000) -#define MCF_INTC_INTFRCL_INTFRC16 (0x00010000) -#define MCF_INTC_INTFRCL_INTFRC17 (0x00020000) -#define MCF_INTC_INTFRCL_INTFRC18 (0x00040000) -#define MCF_INTC_INTFRCL_INTFRC19 (0x00080000) -#define MCF_INTC_INTFRCL_INTFRC20 (0x00100000) -#define MCF_INTC_INTFRCL_INTFRC21 (0x00200000) -#define MCF_INTC_INTFRCL_INTFRC22 (0x00400000) -#define MCF_INTC_INTFRCL_INTFRC23 (0x00800000) -#define MCF_INTC_INTFRCL_INTFRC24 (0x01000000) -#define MCF_INTC_INTFRCL_INTFRC25 (0x02000000) -#define MCF_INTC_INTFRCL_INTFRC26 (0x04000000) -#define MCF_INTC_INTFRCL_INTFRC27 (0x08000000) -#define MCF_INTC_INTFRCL_INTFRC28 (0x10000000) -#define MCF_INTC_INTFRCL_INTFRC29 (0x20000000) -#define MCF_INTC_INTFRCL_INTFRC30 (0x40000000) -#define MCF_INTC_INTFRCL_INTFRC31 (0x80000000) - -/* Bit definitions and macros for MCF_INTC_ICONFIG */ -#define MCF_INTC_ICONFIG_EMASK (0x0020) -#define MCF_INTC_ICONFIG_ELVLPRI1 (0x0200) -#define MCF_INTC_ICONFIG_ELVLPRI2 (0x0400) -#define MCF_INTC_ICONFIG_ELVLPRI3 (0x0800) -#define MCF_INTC_ICONFIG_ELVLPRI4 (0x1000) -#define MCF_INTC_ICONFIG_ELVLPRI5 (0x2000) -#define MCF_INTC_ICONFIG_ELVLPRI6 (0x4000) -#define MCF_INTC_ICONFIG_ELVLPRI7 (0x8000) - -/* Bit definitions and macros for MCF_INTC_SIMR */ -#define MCF_INTC_SIMR_SIMR(x) (((x)&0x7F)<<0) - -/* Bit definitions and macros for MCF_INTC_CIMR */ -#define MCF_INTC_CIMR_CIMR(x) (((x)&0x7F)<<0) - -/* Bit definitions and macros for MCF_INTC_CLMASK */ -#define MCF_INTC_CLMASK_CLMASK(x) (((x)&0x0F)<<0) - -/* Bit definitions and macros for MCF_INTC_SLMASK */ -#define MCF_INTC_SLMASK_SLMASK(x) (((x)&0x0F)<<0) - -/* Bit definitions and macros for MCF_INTC_ICR */ -#define MCF_INTC_ICR_IL(x) (((x)&0x07)<<0) - -/* Bit definitions and macros for MCF_INTC_SWIACK */ -#define MCF_INTC_SWIACK_VECTOR(x) (((x)&0xFF)<<0) - -/* Bit definitions and macros for MCF_INTC_LIACK */ -#define MCF_INTC_LIACK_VECTOR(x) (((x)&0xFF)<<0) - -/********************************************************************/ -/********************************************************************* -* -* LCD Controller (LCDC) -* -*********************************************************************/ - -/* Register read/write macros */ -#define MCF_LCDC_LSSAR MCF_REG32(0xFC0AC000) -#define MCF_LCDC_LSR MCF_REG32(0xFC0AC004) -#define MCF_LCDC_LVPWR MCF_REG32(0xFC0AC008) -#define MCF_LCDC_LCPR MCF_REG32(0xFC0AC00C) -#define MCF_LCDC_LCWHBR MCF_REG32(0xFC0AC010) -#define MCF_LCDC_LCCMR MCF_REG32(0xFC0AC014) -#define MCF_LCDC_LPCR MCF_REG32(0xFC0AC018) -#define MCF_LCDC_LHCR MCF_REG32(0xFC0AC01C) -#define MCF_LCDC_LVCR MCF_REG32(0xFC0AC020) -#define MCF_LCDC_LPOR MCF_REG32(0xFC0AC024) -#define MCF_LCDC_LSCR MCF_REG32(0xFC0AC028) -#define MCF_LCDC_LPCCR MCF_REG32(0xFC0AC02C) -#define MCF_LCDC_LDCR MCF_REG32(0xFC0AC030) -#define MCF_LCDC_LRMCR MCF_REG32(0xFC0AC034) -#define MCF_LCDC_LICR MCF_REG32(0xFC0AC038) -#define MCF_LCDC_LIER MCF_REG32(0xFC0AC03C) -#define MCF_LCDC_LISR MCF_REG32(0xFC0AC040) -#define MCF_LCDC_LGWSAR MCF_REG32(0xFC0AC050) -#define MCF_LCDC_LGWSR MCF_REG32(0xFC0AC054) -#define MCF_LCDC_LGWVPWR MCF_REG32(0xFC0AC058) -#define MCF_LCDC_LGWPOR MCF_REG32(0xFC0AC05C) -#define MCF_LCDC_LGWPR MCF_REG32(0xFC0AC060) -#define MCF_LCDC_LGWCR MCF_REG32(0xFC0AC064) -#define MCF_LCDC_LGWDCR MCF_REG32(0xFC0AC068) -#define MCF_LCDC_BPLUT_BASE MCF_REG32(0xFC0AC800) -#define MCF_LCDC_GWLUT_BASE MCF_REG32(0xFC0ACC00) - -/* Bit definitions and macros for MCF_LCDC_LSSAR */ -#define MCF_LCDC_LSSAR_SSA(x) (((x)&0x3FFFFFFF)<<2) - -/* Bit definitions and macros for MCF_LCDC_LSR */ -#define MCF_LCDC_LSR_YMAX(x) (((x)&0x000003FF)<<0) -#define MCF_LCDC_LSR_XMAX(x) (((x)&0x0000003F)<<20) - -/* Bit definitions and macros for MCF_LCDC_LVPWR */ -#define MCF_LCDC_LVPWR_VPW(x) (((x)&0x000003FF)<<0) - -/* Bit definitions and macros for MCF_LCDC_LCPR */ -#define MCF_LCDC_LCPR_CYP(x) (((x)&0x000003FF)<<0) -#define MCF_LCDC_LCPR_CXP(x) (((x)&0x000003FF)<<16) -#define MCF_LCDC_LCPR_OP (0x10000000) -#define MCF_LCDC_LCPR_CC(x) (((x)&0x00000003)<<30) -#define MCF_LCDC_LCPR_CC_TRANSPARENT (0x00000000) -#define MCF_LCDC_LCPR_CC_OR (0x40000000) -#define MCF_LCDC_LCPR_CC_XOR (0x80000000) -#define MCF_LCDC_LCPR_CC_AND (0xC0000000) -#define MCF_LCDC_LCPR_OP_ON (0x10000000) -#define MCF_LCDC_LCPR_OP_OFF (0x00000000) - -/* Bit definitions and macros for MCF_LCDC_LCWHBR */ -#define MCF_LCDC_LCWHBR_BD(x) (((x)&0x000000FF)<<0) -#define MCF_LCDC_LCWHBR_CH(x) (((x)&0x0000001F)<<16) -#define MCF_LCDC_LCWHBR_CW(x) (((x)&0x0000001F)<<24) -#define MCF_LCDC_LCWHBR_BK_EN (0x80000000) -#define MCF_LCDC_LCWHBR_BK_EN_ON (0x80000000) -#define MCF_LCDC_LCWHBR_BK_EN_OFF (0x00000000) - -/* Bit definitions and macros for MCF_LCDC_LCCMR */ -#define MCF_LCDC_LCCMR_CUR_COL_B(x) (((x)&0x0000003F)<<0) -#define MCF_LCDC_LCCMR_CUR_COL_G(x) (((x)&0x0000003F)<<6) -#define MCF_LCDC_LCCMR_CUR_COL_R(x) (((x)&0x0000003F)<<12) - -/* Bit definitions and macros for MCF_LCDC_LPCR */ -#define MCF_LCDC_LPCR_PCD(x) (((x)&0x0000003F)<<0) -#define MCF_LCDC_LPCR_SHARP (0x00000040) -#define MCF_LCDC_LPCR_SCLKSEL (0x00000080) -#define MCF_LCDC_LPCR_ACD(x) (((x)&0x0000007F)<<8) -#define MCF_LCDC_LPCR_ACDSEL (0x00008000) -#define MCF_LCDC_LPCR_REV_VS (0x00010000) -#define MCF_LCDC_LPCR_SWAP_SEL (0x00020000) -#define MCF_LCDC_LPCR_ENDSEL (0x00040000) -#define MCF_LCDC_LPCR_SCLKIDLE (0x00080000) -#define MCF_LCDC_LPCR_OEPOL (0x00100000) -#define MCF_LCDC_LPCR_CLKPOL (0x00200000) -#define MCF_LCDC_LPCR_LPPOL (0x00400000) -#define MCF_LCDC_LPCR_FLM (0x00800000) -#define MCF_LCDC_LPCR_PIXPOL (0x01000000) -#define MCF_LCDC_LPCR_BPIX(x) (((x)&0x00000007)<<25) -#define MCF_LCDC_LPCR_PBSIZ(x) (((x)&0x00000003)<<28) -#define MCF_LCDC_LPCR_COLOR (0x40000000) -#define MCF_LCDC_LPCR_TFT (0x80000000) -#define MCF_LCDC_LPCR_MODE_MONOCGROME (0x00000000) -#define MCF_LCDC_LPCR_MODE_CSTN (0x40000000) -#define MCF_LCDC_LPCR_MODE_TFT (0xC0000000) -#define MCF_LCDC_LPCR_PBSIZ_1 (0x00000000) -#define MCF_LCDC_LPCR_PBSIZ_2 (0x10000000) -#define MCF_LCDC_LPCR_PBSIZ_4 (0x20000000) -#define MCF_LCDC_LPCR_PBSIZ_8 (0x30000000) -#define MCF_LCDC_LPCR_BPIX_1bpp (0x00000000) -#define MCF_LCDC_LPCR_BPIX_2bpp (0x02000000) -#define MCF_LCDC_LPCR_BPIX_4bpp (0x04000000) -#define MCF_LCDC_LPCR_BPIX_8bpp (0x06000000) -#define MCF_LCDC_LPCR_BPIX_12bpp (0x08000000) -#define MCF_LCDC_LPCR_BPIX_16bpp (0x0A000000) -#define MCF_LCDC_LPCR_BPIX_18bpp (0x0C000000) - -#define MCF_LCDC_LPCR_PANEL_TYPE(x) (((x)&0x00000003)<<30) - -/* Bit definitions and macros for MCF_LCDC_LHCR */ -#define MCF_LCDC_LHCR_H_WAIT_2(x) (((x)&0x000000FF)<<0) -#define MCF_LCDC_LHCR_H_WAIT_1(x) (((x)&0x000000FF)<<8) -#define MCF_LCDC_LHCR_H_WIDTH(x) (((x)&0x0000003F)<<26) - -/* Bit definitions and macros for MCF_LCDC_LVCR */ -#define MCF_LCDC_LVCR_V_WAIT_2(x) (((x)&0x000000FF)<<0) -#define MCF_LCDC_LVCR_V_WAIT_1(x) (((x)&0x000000FF)<<8) -#define MCF_LCDC_LVCR_V_WIDTH(x) (((x)&0x0000003F)<<26) - -/* Bit definitions and macros for MCF_LCDC_LPOR */ -#define MCF_LCDC_LPOR_POS(x) (((x)&0x0000001F)<<0) - -/* Bit definitions and macros for MCF_LCDC_LPCCR */ -#define MCF_LCDC_LPCCR_PW(x) (((x)&0x000000FF)<<0) -#define MCF_LCDC_LPCCR_CC_EN (0x00000100) -#define MCF_LCDC_LPCCR_SCR(x) (((x)&0x00000003)<<9) -#define MCF_LCDC_LPCCR_LDMSK (0x00008000) -#define MCF_LCDC_LPCCR_CLS_HI_WIDTH(x) (((x)&0x000001FF)<<16) -#define MCF_LCDC_LPCCR_SCR_LINEPULSE (0x00000000) -#define MCF_LCDC_LPCCR_SCR_PIXELCLK (0x00002000) -#define MCF_LCDC_LPCCR_SCR_LCDCLOCK (0x00004000) - -/* Bit definitions and macros for MCF_LCDC_LDCR */ -#define MCF_LCDC_LDCR_TM(x) (((x)&0x0000001F)<<0) -#define MCF_LCDC_LDCR_HM(x) (((x)&0x0000001F)<<16) -#define MCF_LCDC_LDCR_BURST (0x80000000) - -/* Bit definitions and macros for MCF_LCDC_LRMCR */ -#define MCF_LCDC_LRMCR_SEL_REF (0x00000001) - -/* Bit definitions and macros for MCF_LCDC_LICR */ -#define MCF_LCDC_LICR_INTCON (0x00000001) -#define MCF_LCDC_LICR_INTSYN (0x00000004) -#define MCF_LCDC_LICR_GW_INT_CON (0x00000010) - -/* Bit definitions and macros for MCF_LCDC_LIER */ -#define MCF_LCDC_LIER_BOF_EN (0x00000001) -#define MCF_LCDC_LIER_EOF_EN (0x00000002) -#define MCF_LCDC_LIER_ERR_RES_EN (0x00000004) -#define MCF_LCDC_LIER_UDR_ERR_EN (0x00000008) -#define MCF_LCDC_LIER_GW_BOF_EN (0x00000010) -#define MCF_LCDC_LIER_GW_EOF_EN (0x00000020) -#define MCF_LCDC_LIER_GW_ERR_RES_EN (0x00000040) -#define MCF_LCDC_LIER_GW_UDR_ERR_EN (0x00000080) - -/* Bit definitions and macros for MCF_LCDC_LISR */ -#define MCF_LCDC_LISR_BOF (0x00000001) -#define MCF_LCDC_LISR_EOF (0x00000002) -#define MCF_LCDC_LISR_ERR_RES (0x00000004) -#define MCF_LCDC_LISR_UDR_ERR (0x00000008) -#define MCF_LCDC_LISR_GW_BOF (0x00000010) -#define MCF_LCDC_LISR_GW_EOF (0x00000020) -#define MCF_LCDC_LISR_GW_ERR_RES (0x00000040) -#define MCF_LCDC_LISR_GW_UDR_ERR (0x00000080) - -/* Bit definitions and macros for MCF_LCDC_LGWSAR */ -#define MCF_LCDC_LGWSAR_GWSA(x) (((x)&0x3FFFFFFF)<<2) - -/* Bit definitions and macros for MCF_LCDC_LGWSR */ -#define MCF_LCDC_LGWSR_GWH(x) (((x)&0x000003FF)<<0) -#define MCF_LCDC_LGWSR_GWW(x) (((x)&0x0000003F)<<20) - -/* Bit definitions and macros for MCF_LCDC_LGWVPWR */ -#define MCF_LCDC_LGWVPWR_GWVPW(x) (((x)&0x000003FF)<<0) - -/* Bit definitions and macros for MCF_LCDC_LGWPOR */ -#define MCF_LCDC_LGWPOR_GWPO(x) (((x)&0x0000001F)<<0) - -/* Bit definitions and macros for MCF_LCDC_LGWPR */ -#define MCF_LCDC_LGWPR_GWYP(x) (((x)&0x000003FF)<<0) -#define MCF_LCDC_LGWPR_GWXP(x) (((x)&0x000003FF)<<16) - -/* Bit definitions and macros for MCF_LCDC_LGWCR */ -#define MCF_LCDC_LGWCR_GWCKB(x) (((x)&0x0000003F)<<0) -#define MCF_LCDC_LGWCR_GWCKG(x) (((x)&0x0000003F)<<6) -#define MCF_LCDC_LGWCR_GWCKR(x) (((x)&0x0000003F)<<12) -#define MCF_LCDC_LGWCR_GW_RVS (0x00200000) -#define MCF_LCDC_LGWCR_GWE (0x00400000) -#define MCF_LCDC_LGWCR_GWCKE (0x00800000) -#define MCF_LCDC_LGWCR_GWAV(x) (((x)&0x000000FF)<<24) - -/* Bit definitions and macros for MCF_LCDC_LGWDCR */ -#define MCF_LCDC_LGWDCR_GWTM(x) (((x)&0x0000001F)<<0) -#define MCF_LCDC_LGWDCR_GWHM(x) (((x)&0x0000001F)<<16) -#define MCF_LCDC_LGWDCR_GWBT (0x80000000) - -/* Bit definitions and macros for MCF_LCDC_LSCR */ -#define MCF_LCDC_LSCR_PS_RISE_DELAY(x) (((x)&0x0000003F)<<26) -#define MCF_LCDC_LSCR_CLS_RISE_DELAY(x) (((x)&0x000000FF)<<16) -#define MCF_LCDC_LSCR_REV_TOGGLE_DELAY(x) (((x)&0x0000000F)<<8) -#define MCF_LCDC_LSCR_GRAY_2(x) (((x)&0x0000000F)<<4) -#define MCF_LCDC_LSCR_GRAY_1(x) (((x)&0x0000000F)<<0) - -/* Bit definitions and macros for MCF_LCDC_BPLUT_BASE */ -#define MCF_LCDC_BPLUT_BASE_BASE(x) (((x)&0xFFFFFFFF)<<0) - -/* Bit definitions and macros for MCF_LCDC_GWLUT_BASE */ -#define MCF_LCDC_GWLUT_BASE_BASE(x) (((x)&0xFFFFFFFF)<<0) - -/********************************************************************* - * - * Phase Locked Loop (PLL) - * - *********************************************************************/ - -/* Register read/write macros */ -#define MCF_PLL_PODR MCF_REG08(0xFC0C0000) -#define MCF_PLL_PLLCR MCF_REG08(0xFC0C0004) -#define MCF_PLL_PMDR MCF_REG08(0xFC0C0008) -#define MCF_PLL_PFDR MCF_REG08(0xFC0C000C) - -/* Bit definitions and macros for MCF_PLL_PODR */ -#define MCF_PLL_PODR_BUSDIV(x) (((x)&0x0F)<<0) -#define MCF_PLL_PODR_CPUDIV(x) (((x)&0x0F)<<4) - -/* Bit definitions and macros for MCF_PLL_PLLCR */ -#define MCF_PLL_PLLCR_DITHDEV(x) (((x)&0x07)<<0) -#define MCF_PLL_PLLCR_DITHEN (0x80) - -/* Bit definitions and macros for MCF_PLL_PMDR */ -#define MCF_PLL_PMDR_MODDIV(x) (((x)&0xFF)<<0) - -/* Bit definitions and macros for MCF_PLL_PFDR */ -#define MCF_PLL_PFDR_MFD(x) (((x)&0xFF)<<0) - -/********************************************************************* - * - * System Control Module Registers (SCM) - * - *********************************************************************/ - -/* Register read/write macros */ -#define MCF_SCM_MPR MCF_REG32(0xFC000000) -#define MCF_SCM_PACRA MCF_REG32(0xFC000020) -#define MCF_SCM_PACRB MCF_REG32(0xFC000024) -#define MCF_SCM_PACRC MCF_REG32(0xFC000028) -#define MCF_SCM_PACRD MCF_REG32(0xFC00002C) -#define MCF_SCM_PACRE MCF_REG32(0xFC000040) -#define MCF_SCM_PACRF MCF_REG32(0xFC000044) - -#define MCF_SCM_BCR MCF_REG32(0xFC040024) - -/********************************************************************* - * - * SDRAM Controller (SDRAMC) - * - *********************************************************************/ - -/* Register read/write macros */ -#define MCF_SDRAMC_SDMR MCF_REG32(0xFC0B8000) -#define MCF_SDRAMC_SDCR MCF_REG32(0xFC0B8004) -#define MCF_SDRAMC_SDCFG1 MCF_REG32(0xFC0B8008) -#define MCF_SDRAMC_SDCFG2 MCF_REG32(0xFC0B800C) -#define MCF_SDRAMC_LIMP_FIX MCF_REG32(0xFC0B8080) -#define MCF_SDRAMC_SDDS MCF_REG32(0xFC0B8100) -#define MCF_SDRAMC_SDCS0 MCF_REG32(0xFC0B8110) -#define MCF_SDRAMC_SDCS1 MCF_REG32(0xFC0B8114) -#define MCF_SDRAMC_SDCS2 MCF_REG32(0xFC0B8118) -#define MCF_SDRAMC_SDCS3 MCF_REG32(0xFC0B811C) -#define MCF_SDRAMC_SDCS(x) MCF_REG32(0xFC0B8110+((x)*0x004)) - -/* Bit definitions and macros for MCF_SDRAMC_SDMR */ -#define MCF_SDRAMC_SDMR_CMD (0x00010000) -#define MCF_SDRAMC_SDMR_AD(x) (((x)&0x00000FFF)<<18) -#define MCF_SDRAMC_SDMR_BNKAD(x) (((x)&0x00000003)<<30) -#define MCF_SDRAMC_SDMR_BNKAD_LMR (0x00000000) -#define MCF_SDRAMC_SDMR_BNKAD_LEMR (0x40000000) - -/* Bit definitions and macros for MCF_SDRAMC_SDCR */ -#define MCF_SDRAMC_SDCR_IPALL (0x00000002) -#define MCF_SDRAMC_SDCR_IREF (0x00000004) -#define MCF_SDRAMC_SDCR_DQS_OE(x) (((x)&0x0000000F)<<8) -#define MCF_SDRAMC_SDCR_PS(x) (((x)&0x00000003)<<12) -#define MCF_SDRAMC_SDCR_RCNT(x) (((x)&0x0000003F)<<16) -#define MCF_SDRAMC_SDCR_OE_RULE (0x00400000) -#define MCF_SDRAMC_SDCR_MUX(x) (((x)&0x00000003)<<24) -#define MCF_SDRAMC_SDCR_REF (0x10000000) -#define MCF_SDRAMC_SDCR_DDR (0x20000000) -#define MCF_SDRAMC_SDCR_CKE (0x40000000) -#define MCF_SDRAMC_SDCR_MODE_EN (0x80000000) -#define MCF_SDRAMC_SDCR_PS_16 (0x00002000) -#define MCF_SDRAMC_SDCR_PS_32 (0x00000000) - -/* Bit definitions and macros for MCF_SDRAMC_SDCFG1 */ -#define MCF_SDRAMC_SDCFG1_WTLAT(x) (((x)&0x00000007)<<4) -#define MCF_SDRAMC_SDCFG1_REF2ACT(x) (((x)&0x0000000F)<<8) -#define MCF_SDRAMC_SDCFG1_PRE2ACT(x) (((x)&0x00000007)<<12) -#define MCF_SDRAMC_SDCFG1_ACT2RW(x) (((x)&0x00000007)<<16) -#define MCF_SDRAMC_SDCFG1_RDLAT(x) (((x)&0x0000000F)<<20) -#define MCF_SDRAMC_SDCFG1_SWT2RD(x) (((x)&0x00000007)<<24) -#define MCF_SDRAMC_SDCFG1_SRD2RW(x) (((x)&0x0000000F)<<28) - -/* Bit definitions and macros for MCF_SDRAMC_SDCFG2 */ -#define MCF_SDRAMC_SDCFG2_BL(x) (((x)&0x0000000F)<<16) -#define MCF_SDRAMC_SDCFG2_BRD2WT(x) (((x)&0x0000000F)<<20) -#define MCF_SDRAMC_SDCFG2_BWT2RW(x) (((x)&0x0000000F)<<24) -#define MCF_SDRAMC_SDCFG2_BRD2PRE(x) (((x)&0x0000000F)<<28) - -/* Device Errata - LIMP mode work around */ -#define MCF_SDRAMC_REFRESH (0x40000000) - -/* Bit definitions and macros for MCF_SDRAMC_SDDS */ -#define MCF_SDRAMC_SDDS_SB_D(x) (((x)&0x00000003)<<0) -#define MCF_SDRAMC_SDDS_SB_S(x) (((x)&0x00000003)<<2) -#define MCF_SDRAMC_SDDS_SB_A(x) (((x)&0x00000003)<<4) -#define MCF_SDRAMC_SDDS_SB_C(x) (((x)&0x00000003)<<6) -#define MCF_SDRAMC_SDDS_SB_E(x) (((x)&0x00000003)<<8) - -/* Bit definitions and macros for MCF_SDRAMC_SDCS */ -#define MCF_SDRAMC_SDCS_CSSZ(x) (((x)&0x0000001F)<<0) -#define MCF_SDRAMC_SDCS_BASE(x) (((x)&0x00000FFF)<<20) -#define MCF_SDRAMC_SDCS_BA(x) ((x)&0xFFF00000) -#define MCF_SDRAMC_SDCS_CSSZ_DIABLE (0x00000000) -#define MCF_SDRAMC_SDCS_CSSZ_1MBYTE (0x00000013) -#define MCF_SDRAMC_SDCS_CSSZ_2MBYTE (0x00000014) -#define MCF_SDRAMC_SDCS_CSSZ_4MBYTE (0x00000015) -#define MCF_SDRAMC_SDCS_CSSZ_8MBYTE (0x00000016) -#define MCF_SDRAMC_SDCS_CSSZ_16MBYTE (0x00000017) -#define MCF_SDRAMC_SDCS_CSSZ_32MBYTE (0x00000018) -#define MCF_SDRAMC_SDCS_CSSZ_64MBYTE (0x00000019) -#define MCF_SDRAMC_SDCS_CSSZ_128MBYTE (0x0000001A) -#define MCF_SDRAMC_SDCS_CSSZ_256MBYTE (0x0000001B) -#define MCF_SDRAMC_SDCS_CSSZ_512MBYTE (0x0000001C) -#define MCF_SDRAMC_SDCS_CSSZ_1GBYTE (0x0000001D) -#define MCF_SDRAMC_SDCS_CSSZ_2GBYTE (0x0000001E) -#define MCF_SDRAMC_SDCS_CSSZ_4GBYTE (0x0000001F) - -/********************************************************************* - * - * FlexCAN module registers - * - *********************************************************************/ -#define MCF_FLEXCAN_BASEADDR(x) (0xFC020000+(x)*0x0800) -#define MCF_FLEXCAN_CANMCR(x) MCF_REG32(0xFC020000+(x)*0x0800+0x00) -#define MCF_FLEXCAN_CANCTRL(x) MCF_REG32(0xFC020000+(x)*0x0800+0x04) -#define MCF_FLEXCAN_TIMER(x) MCF_REG32(0xFC020000+(x)*0x0800+0x08) -#define MCF_FLEXCAN_RXGMASK(x) MCF_REG32(0xFC020000+(x)*0x0800+0x10) -#define MCF_FLEXCAN_RX14MASK(x) MCF_REG32(0xFC020000+(x)*0x0800+0x14) -#define MCF_FLEXCAN_RX15MASK(x) MCF_REG32(0xFC020000+(x)*0x0800+0x18) -#define MCF_FLEXCAN_ERRCNT(x) MCF_REG32(0xFC020000+(x)*0x0800+0x1C) -#define MCF_FLEXCAN_ERRSTAT(x) MCF_REG32(0xFC020000+(x)*0x0800+0x20) -#define MCF_FLEXCAN_IMASK(x) MCF_REG32(0xFC020000+(x)*0x0800+0x28) -#define MCF_FLEXCAN_IFLAG(x) MCF_REG32(0xFC020000+(x)*0x0800+0x30) - -#define MCF_FLEXCAN_MB_CNT(x,y) MCF_REG32(0xFC020080+(x)*0x0800+(y)*0x10+0x0) -#define MCF_FLEXCAN_MB_ID(x,y) MCF_REG32(0xFC020080+(x)*0x0800+(y)*0x10+0x4) -#define MCF_FLEXCAN_MB_DB(x,y,z) MCF_REG08(0xFC020080+(x)*0x0800+(y)*0x10+0x8+(z)*0x1) - -/* - * FlexCAN Module Configuration Register - */ -#define CANMCR_MDIS (0x80000000) -#define CANMCR_FRZ (0x40000000) -#define CANMCR_HALT (0x10000000) -#define CANMCR_SOFTRST (0x02000000) -#define CANMCR_FRZACK (0x01000000) -#define CANMCR_SUPV (0x00800000) -#define CANMCR_MAXMB(x) ((x)&0x0F) - -/* - * FlexCAN Control Register - */ -#define CANCTRL_PRESDIV(x) (((x)&0xFF)<<24) -#define CANCTRL_RJW(x) (((x)&0x03)<<22) -#define CANCTRL_PSEG1(x) (((x)&0x07)<<19) -#define CANCTRL_PSEG2(x) (((x)&0x07)<<16) -#define CANCTRL_BOFFMSK (0x00008000) -#define CANCTRL_ERRMSK (0x00004000) -#define CANCTRL_CLKSRC (0x00002000) -#define CANCTRL_LPB (0x00001000) -#define CANCTRL_SAMP (0x00000080) -#define CANCTRL_BOFFREC (0x00000040) -#define CANCTRL_TSYNC (0x00000020) -#define CANCTRL_LBUF (0x00000010) -#define CANCTRL_LOM (0x00000008) -#define CANCTRL_PROPSEG(x) ((x)&0x07) - -/* - * FlexCAN Error Counter Register - */ -#define ERRCNT_RXECTR(x) (((x)&0xFF)<<8) -#define ERRCNT_TXECTR(x) ((x)&0xFF) - -/* - * FlexCAN Error and Status Register - */ -#define ERRSTAT_BITERR(x) (((x)&0x03)<<14) -#define ERRSTAT_ACKERR (0x00002000) -#define ERRSTAT_CRCERR (0x00001000) -#define ERRSTAT_FRMERR (0x00000800) -#define ERRSTAT_STFERR (0x00000400) -#define ERRSTAT_TXWRN (0x00000200) -#define ERRSTAT_RXWRN (0x00000100) -#define ERRSTAT_IDLE (0x00000080) -#define ERRSTAT_TXRX (0x00000040) -#define ERRSTAT_FLTCONF(x) (((x)&0x03)<<4) -#define ERRSTAT_BOFFINT (0x00000004) -#define ERRSTAT_ERRINT (0x00000002) - -/* - * Interrupt Mask Register - */ -#define IMASK_BUF15M (0x8000) -#define IMASK_BUF14M (0x4000) -#define IMASK_BUF13M (0x2000) -#define IMASK_BUF12M (0x1000) -#define IMASK_BUF11M (0x0800) -#define IMASK_BUF10M (0x0400) -#define IMASK_BUF9M (0x0200) -#define IMASK_BUF8M (0x0100) -#define IMASK_BUF7M (0x0080) -#define IMASK_BUF6M (0x0040) -#define IMASK_BUF5M (0x0020) -#define IMASK_BUF4M (0x0010) -#define IMASK_BUF3M (0x0008) -#define IMASK_BUF2M (0x0004) -#define IMASK_BUF1M (0x0002) -#define IMASK_BUF0M (0x0001) -#define IMASK_BUFnM(x) (0x1<<(x)) -#define IMASK_BUFF_ENABLE_ALL (0x1111) -#define IMASK_BUFF_DISABLE_ALL (0x0000) - -/* - * Interrupt Flag Register - */ -#define IFLAG_BUF15M (0x8000) -#define IFLAG_BUF14M (0x4000) -#define IFLAG_BUF13M (0x2000) -#define IFLAG_BUF12M (0x1000) -#define IFLAG_BUF11M (0x0800) -#define IFLAG_BUF10M (0x0400) -#define IFLAG_BUF9M (0x0200) -#define IFLAG_BUF8M (0x0100) -#define IFLAG_BUF7M (0x0080) -#define IFLAG_BUF6M (0x0040) -#define IFLAG_BUF5M (0x0020) -#define IFLAG_BUF4M (0x0010) -#define IFLAG_BUF3M (0x0008) -#define IFLAG_BUF2M (0x0004) -#define IFLAG_BUF1M (0x0002) -#define IFLAG_BUF0M (0x0001) -#define IFLAG_BUFF_SET_ALL (0xFFFF) -#define IFLAG_BUFF_CLEAR_ALL (0x0000) -#define IFLAG_BUFnM(x) (0x1<<(x)) - -/* - * Message Buffers - */ -#define MB_CNT_CODE(x) (((x)&0x0F)<<24) -#define MB_CNT_SRR (0x00400000) -#define MB_CNT_IDE (0x00200000) -#define MB_CNT_RTR (0x00100000) -#define MB_CNT_LENGTH(x) (((x)&0x0F)<<16) -#define MB_CNT_TIMESTAMP(x) ((x)&0xFFFF) -#define MB_ID_STD(x) (((x)&0x07FF)<<18) -#define MB_ID_EXT(x) ((x)&0x3FFFF) - -/********************************************************************* - * - * Edge Port Module (EPORT) - * - *********************************************************************/ - -/* Register read/write macros */ -#define MCF_EPORT_EPPAR MCF_REG16(0xFC094000) -#define MCF_EPORT_EPDDR MCF_REG08(0xFC094002) -#define MCF_EPORT_EPIER MCF_REG08(0xFC094003) -#define MCF_EPORT_EPDR MCF_REG08(0xFC094004) -#define MCF_EPORT_EPPDR MCF_REG08(0xFC094005) -#define MCF_EPORT_EPFR MCF_REG08(0xFC094006) - -/* Bit definitions and macros for MCF_EPORT_EPPAR */ -#define MCF_EPORT_EPPAR_EPPA1(x) (((x)&0x0003)<<2) -#define MCF_EPORT_EPPAR_EPPA2(x) (((x)&0x0003)<<4) -#define MCF_EPORT_EPPAR_EPPA3(x) (((x)&0x0003)<<6) -#define MCF_EPORT_EPPAR_EPPA4(x) (((x)&0x0003)<<8) -#define MCF_EPORT_EPPAR_EPPA5(x) (((x)&0x0003)<<10) -#define MCF_EPORT_EPPAR_EPPA6(x) (((x)&0x0003)<<12) -#define MCF_EPORT_EPPAR_EPPA7(x) (((x)&0x0003)<<14) -#define MCF_EPORT_EPPAR_LEVEL (0) -#define MCF_EPORT_EPPAR_RISING (1) -#define MCF_EPORT_EPPAR_FALLING (2) -#define MCF_EPORT_EPPAR_BOTH (3) -#define MCF_EPORT_EPPAR_EPPA7_LEVEL (0x0000) -#define MCF_EPORT_EPPAR_EPPA7_RISING (0x4000) -#define MCF_EPORT_EPPAR_EPPA7_FALLING (0x8000) -#define MCF_EPORT_EPPAR_EPPA7_BOTH (0xC000) -#define MCF_EPORT_EPPAR_EPPA6_LEVEL (0x0000) -#define MCF_EPORT_EPPAR_EPPA6_RISING (0x1000) -#define MCF_EPORT_EPPAR_EPPA6_FALLING (0x2000) -#define MCF_EPORT_EPPAR_EPPA6_BOTH (0x3000) -#define MCF_EPORT_EPPAR_EPPA5_LEVEL (0x0000) -#define MCF_EPORT_EPPAR_EPPA5_RISING (0x0400) -#define MCF_EPORT_EPPAR_EPPA5_FALLING (0x0800) -#define MCF_EPORT_EPPAR_EPPA5_BOTH (0x0C00) -#define MCF_EPORT_EPPAR_EPPA4_LEVEL (0x0000) -#define MCF_EPORT_EPPAR_EPPA4_RISING (0x0100) -#define MCF_EPORT_EPPAR_EPPA4_FALLING (0x0200) -#define MCF_EPORT_EPPAR_EPPA4_BOTH (0x0300) -#define MCF_EPORT_EPPAR_EPPA3_LEVEL (0x0000) -#define MCF_EPORT_EPPAR_EPPA3_RISING (0x0040) -#define MCF_EPORT_EPPAR_EPPA3_FALLING (0x0080) -#define MCF_EPORT_EPPAR_EPPA3_BOTH (0x00C0) -#define MCF_EPORT_EPPAR_EPPA2_LEVEL (0x0000) -#define MCF_EPORT_EPPAR_EPPA2_RISING (0x0010) -#define MCF_EPORT_EPPAR_EPPA2_FALLING (0x0020) -#define MCF_EPORT_EPPAR_EPPA2_BOTH (0x0030) -#define MCF_EPORT_EPPAR_EPPA1_LEVEL (0x0000) -#define MCF_EPORT_EPPAR_EPPA1_RISING (0x0004) -#define MCF_EPORT_EPPAR_EPPA1_FALLING (0x0008) -#define MCF_EPORT_EPPAR_EPPA1_BOTH (0x000C) - -/* Bit definitions and macros for MCF_EPORT_EPDDR */ -#define MCF_EPORT_EPDDR_EPDD1 (0x02) -#define MCF_EPORT_EPDDR_EPDD2 (0x04) -#define MCF_EPORT_EPDDR_EPDD3 (0x08) -#define MCF_EPORT_EPDDR_EPDD4 (0x10) -#define MCF_EPORT_EPDDR_EPDD5 (0x20) -#define MCF_EPORT_EPDDR_EPDD6 (0x40) -#define MCF_EPORT_EPDDR_EPDD7 (0x80) - -/* Bit definitions and macros for MCF_EPORT_EPIER */ -#define MCF_EPORT_EPIER_EPIE1 (0x02) -#define MCF_EPORT_EPIER_EPIE2 (0x04) -#define MCF_EPORT_EPIER_EPIE3 (0x08) -#define MCF_EPORT_EPIER_EPIE4 (0x10) -#define MCF_EPORT_EPIER_EPIE5 (0x20) -#define MCF_EPORT_EPIER_EPIE6 (0x40) -#define MCF_EPORT_EPIER_EPIE7 (0x80) - -/* Bit definitions and macros for MCF_EPORT_EPDR */ -#define MCF_EPORT_EPDR_EPD1 (0x02) -#define MCF_EPORT_EPDR_EPD2 (0x04) -#define MCF_EPORT_EPDR_EPD3 (0x08) -#define MCF_EPORT_EPDR_EPD4 (0x10) -#define MCF_EPORT_EPDR_EPD5 (0x20) -#define MCF_EPORT_EPDR_EPD6 (0x40) -#define MCF_EPORT_EPDR_EPD7 (0x80) - -/* Bit definitions and macros for MCF_EPORT_EPPDR */ -#define MCF_EPORT_EPPDR_EPPD1 (0x02) -#define MCF_EPORT_EPPDR_EPPD2 (0x04) -#define MCF_EPORT_EPPDR_EPPD3 (0x08) -#define MCF_EPORT_EPPDR_EPPD4 (0x10) -#define MCF_EPORT_EPPDR_EPPD5 (0x20) -#define MCF_EPORT_EPPDR_EPPD6 (0x40) -#define MCF_EPORT_EPPDR_EPPD7 (0x80) - -/* Bit definitions and macros for MCF_EPORT_EPFR */ -#define MCF_EPORT_EPFR_EPF1 (0x02) -#define MCF_EPORT_EPFR_EPF2 (0x04) -#define MCF_EPORT_EPFR_EPF3 (0x08) -#define MCF_EPORT_EPFR_EPF4 (0x10) -#define MCF_EPORT_EPFR_EPF5 (0x20) -#define MCF_EPORT_EPFR_EPF6 (0x40) -#define MCF_EPORT_EPFR_EPF7 (0x80) - -/********************************************************************/ -#endif /* m532xsim_h */ diff --git a/arch/m68knommu/include/asm/m5407sim.h b/arch/m68knommu/include/asm/m5407sim.h deleted file mode 100644 index cc22c4a5300..00000000000 --- a/arch/m68knommu/include/asm/m5407sim.h +++ /dev/null @@ -1,157 +0,0 @@ -/****************************************************************************/ - -/* - * m5407sim.h -- ColdFire 5407 System Integration Module support. - * - * (C) Copyright 2000, Lineo (www.lineo.com) - * (C) Copyright 1999, Moreton Bay Ventures Pty Ltd. - * - * Modified by David W. Miller for the MCF5307 Eval Board. - */ - -/****************************************************************************/ -#ifndef m5407sim_h -#define m5407sim_h -/****************************************************************************/ - -/* - * Define the 5407 SIM register set addresses. - */ -#define MCFSIM_RSR 0x00 /* Reset Status reg (r/w) */ -#define MCFSIM_SYPCR 0x01 /* System Protection reg (r/w)*/ -#define MCFSIM_SWIVR 0x02 /* SW Watchdog intr reg (r/w) */ -#define MCFSIM_SWSR 0x03 /* SW Watchdog service (r/w) */ -#define MCFSIM_PAR 0x04 /* Pin Assignment reg (r/w) */ -#define MCFSIM_IRQPAR 0x06 /* Interrupt Assignment reg (r/w) */ -#define MCFSIM_PLLCR 0x08 /* PLL Controll Reg*/ -#define MCFSIM_MPARK 0x0C /* BUS Master Control Reg*/ -#define MCFSIM_IPR 0x40 /* Interrupt Pend reg (r/w) */ -#define MCFSIM_IMR 0x44 /* Interrupt Mask reg (r/w) */ -#define MCFSIM_AVR 0x4b /* Autovector Ctrl reg (r/w) */ -#define MCFSIM_ICR0 0x4c /* Intr Ctrl reg 0 (r/w) */ -#define MCFSIM_ICR1 0x4d /* Intr Ctrl reg 1 (r/w) */ -#define MCFSIM_ICR2 0x4e /* Intr Ctrl reg 2 (r/w) */ -#define MCFSIM_ICR3 0x4f /* Intr Ctrl reg 3 (r/w) */ -#define MCFSIM_ICR4 0x50 /* Intr Ctrl reg 4 (r/w) */ -#define MCFSIM_ICR5 0x51 /* Intr Ctrl reg 5 (r/w) */ -#define MCFSIM_ICR6 0x52 /* Intr Ctrl reg 6 (r/w) */ -#define MCFSIM_ICR7 0x53 /* Intr Ctrl reg 7 (r/w) */ -#define MCFSIM_ICR8 0x54 /* Intr Ctrl reg 8 (r/w) */ -#define MCFSIM_ICR9 0x55 /* Intr Ctrl reg 9 (r/w) */ -#define MCFSIM_ICR10 0x56 /* Intr Ctrl reg 10 (r/w) */ -#define MCFSIM_ICR11 0x57 /* Intr Ctrl reg 11 (r/w) */ - -#define MCFSIM_CSAR0 0x80 /* CS 0 Address 0 reg (r/w) */ -#define MCFSIM_CSMR0 0x84 /* CS 0 Mask 0 reg (r/w) */ -#define MCFSIM_CSCR0 0x8a /* CS 0 Control reg (r/w) */ -#define MCFSIM_CSAR1 0x8c /* CS 1 Address reg (r/w) */ -#define MCFSIM_CSMR1 0x90 /* CS 1 Mask reg (r/w) */ -#define MCFSIM_CSCR1 0x96 /* CS 1 Control reg (r/w) */ - -#define MCFSIM_CSAR2 0x98 /* CS 2 Address reg (r/w) */ -#define MCFSIM_CSMR2 0x9c /* CS 2 Mask reg (r/w) */ -#define MCFSIM_CSCR2 0xa2 /* CS 2 Control reg (r/w) */ -#define MCFSIM_CSAR3 0xa4 /* CS 3 Address reg (r/w) */ -#define MCFSIM_CSMR3 0xa8 /* CS 3 Mask reg (r/w) */ -#define MCFSIM_CSCR3 0xae /* CS 3 Control reg (r/w) */ -#define MCFSIM_CSAR4 0xb0 /* CS 4 Address reg (r/w) */ -#define MCFSIM_CSMR4 0xb4 /* CS 4 Mask reg (r/w) */ -#define MCFSIM_CSCR4 0xba /* CS 4 Control reg (r/w) */ -#define MCFSIM_CSAR5 0xbc /* CS 5 Address reg (r/w) */ -#define MCFSIM_CSMR5 0xc0 /* CS 5 Mask reg (r/w) */ -#define MCFSIM_CSCR5 0xc6 /* CS 5 Control reg (r/w) */ -#define MCFSIM_CSAR6 0xc8 /* CS 6 Address reg (r/w) */ -#define MCFSIM_CSMR6 0xcc /* CS 6 Mask reg (r/w) */ -#define MCFSIM_CSCR6 0xd2 /* CS 6 Control reg (r/w) */ -#define MCFSIM_CSAR7 0xd4 /* CS 7 Address reg (r/w) */ -#define MCFSIM_CSMR7 0xd8 /* CS 7 Mask reg (r/w) */ -#define MCFSIM_CSCR7 0xde /* CS 7 Control reg (r/w) */ - -#define MCFSIM_DCR 0x100 /* DRAM Control reg (r/w) */ -#define MCFSIM_DACR0 0x108 /* DRAM 0 Addr and Ctrl (r/w) */ -#define MCFSIM_DMR0 0x10c /* DRAM 0 Mask reg (r/w) */ -#define MCFSIM_DACR1 0x110 /* DRAM 1 Addr and Ctrl (r/w) */ -#define MCFSIM_DMR1 0x114 /* DRAM 1 Mask reg (r/w) */ - -#define MCFSIM_PADDR 0x244 /* Parallel Direction (r/w) */ -#define MCFSIM_PADAT 0x248 /* Parallel Data (r/w) */ - - -/* - * Some symbol defines for the above... - */ -#define MCFSIM_SWDICR MCFSIM_ICR0 /* Watchdog timer ICR */ -#define MCFSIM_TIMER1ICR MCFSIM_ICR1 /* Timer 1 ICR */ -#define MCFSIM_TIMER2ICR MCFSIM_ICR2 /* Timer 2 ICR */ -#define MCFSIM_UART1ICR MCFSIM_ICR4 /* UART 1 ICR */ -#define MCFSIM_UART2ICR MCFSIM_ICR5 /* UART 2 ICR */ -#define MCFSIM_DMA0ICR MCFSIM_ICR6 /* DMA 0 ICR */ -#define MCFSIM_DMA1ICR MCFSIM_ICR7 /* DMA 1 ICR */ -#define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */ -#define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */ - -/* - * Macro to set IMR register. It is 32 bits on the 5407. - */ -#define mcf_getimr() \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) - -#define mcf_setimr(imr) \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr); - -#define mcf_getipr() \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR)) - - -/* - * Some symbol defines for the Parallel Port Pin Assignment Register - */ -#define MCFSIM_PAR_DREQ0 0x40 /* Set to select DREQ0 input */ - /* Clear to select par I/O */ -#define MCFSIM_PAR_DREQ1 0x20 /* Select DREQ1 input */ - /* Clear to select par I/O */ - -/* - * Defines for the IRQPAR Register - */ -#define IRQ5_LEVEL4 0x80 -#define IRQ3_LEVEL6 0x40 -#define IRQ1_LEVEL2 0x20 - - -/* - * Define the Cache register flags. - */ -#define CACR_DEC 0x80000000 /* Enable data cache */ -#define CACR_DWP 0x40000000 /* Data write protection */ -#define CACR_DESB 0x20000000 /* Enable data store buffer */ -#define CACR_DDPI 0x10000000 /* Disable CPUSHL */ -#define CACR_DHCLK 0x08000000 /* Half data cache lock mode */ -#define CACR_DDCM_WT 0x00000000 /* Write through cache*/ -#define CACR_DDCM_CP 0x02000000 /* Copyback cache */ -#define CACR_DDCM_P 0x04000000 /* No cache, precise */ -#define CACR_DDCM_IMP 0x06000000 /* No cache, imprecise */ -#define CACR_DCINVA 0x01000000 /* Invalidate data cache */ -#define CACR_BEC 0x00080000 /* Enable branch cache */ -#define CACR_BCINVA 0x00040000 /* Invalidate branch cache */ -#define CACR_IEC 0x00008000 /* Enable instruction cache */ -#define CACR_DNFB 0x00002000 /* Inhibited fill buffer */ -#define CACR_IDPI 0x00001000 /* Disable CPUSHL */ -#define CACR_IHLCK 0x00000800 /* Intruction cache half lock */ -#define CACR_IDCM 0x00000400 /* Intruction cache inhibit */ -#define CACR_ICINVA 0x00000100 /* Invalidate instr cache */ - -#define ACR_BASE_POS 24 /* Address Base */ -#define ACR_MASK_POS 16 /* Address Mask */ -#define ACR_ENABLE 0x00008000 /* Enable address */ -#define ACR_USER 0x00000000 /* User mode access only */ -#define ACR_SUPER 0x00002000 /* Supervisor mode only */ -#define ACR_ANY 0x00004000 /* Match any access mode */ -#define ACR_CM_WT 0x00000000 /* Write through mode */ -#define ACR_CM_CP 0x00000020 /* Copyback mode */ -#define ACR_CM_OFF_PRE 0x00000040 /* No cache, precise */ -#define ACR_CM_OFF_IMP 0x00000060 /* No cache, imprecise */ -#define ACR_WPROTECT 0x00000004 /* Write protect */ - -/****************************************************************************/ -#endif /* m5407sim_h */ diff --git a/arch/m68knommu/include/asm/m68360.h b/arch/m68knommu/include/asm/m68360.h deleted file mode 100644 index eb7d39ef285..00000000000 --- a/arch/m68knommu/include/asm/m68360.h +++ /dev/null @@ -1,13 +0,0 @@ -#include "m68360_regs.h" -#include "m68360_pram.h" -#include "m68360_quicc.h" -#include "m68360_enet.h" - -#ifdef CONFIG_M68360 - -#define CPM_INTERRUPT 4 - -/* see MC68360 User's Manual, p. 7-377 */ -#define CPM_VECTOR_BASE 0x04 /* 3 MSbits of CPM vector */ - -#endif /* CONFIG_M68360 */ diff --git a/arch/m68knommu/include/asm/m68360_enet.h b/arch/m68knommu/include/asm/m68360_enet.h deleted file mode 100644 index c36f4d05920..00000000000 --- a/arch/m68knommu/include/asm/m68360_enet.h +++ /dev/null @@ -1,177 +0,0 @@ -/*********************************** - * $Id: m68360_enet.h,v 1.1 2002/03/02 15:01:07 gerg Exp $ - *********************************** - * - *************************************** - * Definitions for the ETHERNET controllers - *************************************** - */ - -#ifndef __ETHER_H -#define __ETHER_H - -#include "quicc_simple.h" - -/* - * transmit BD's - */ -#define T_R 0x8000 /* ready bit */ -#define E_T_PAD 0x4000 /* short frame padding */ -#define T_W 0x2000 /* wrap bit */ -#define T_I 0x1000 /* interrupt on completion */ -#define T_L 0x0800 /* last in frame */ -#define T_TC 0x0400 /* transmit CRC (when last) */ - -#define T_DEF 0x0200 /* defer indication */ -#define T_HB 0x0100 /* heartbeat */ -#define T_LC 0x0080 /* error: late collision */ -#define T_RL 0x0040 /* error: retransmission limit */ -#define T_RC 0x003c /* retry count */ -#define T_UN 0x0002 /* error: underrun */ -#define T_CSL 0x0001 /* carier sense lost */ -#define T_ERROR (T_HB | T_LC | T_RL | T_UN | T_CSL) - -/* - * receive BD's - */ -#define R_E 0x8000 /* buffer empty */ -#define R_W 0x2000 /* wrap bit */ -#define R_I 0x1000 /* interrupt on reception */ -#define R_L 0x0800 /* last BD in frame */ -#define R_F 0x0400 /* first BD in frame */ -#define R_M 0x0100 /* received because of promisc. mode */ - -#define R_LG 0x0020 /* frame too long */ -#define R_NO 0x0010 /* non-octet aligned */ -#define R_SH 0x0008 /* short frame */ -#define R_CR 0x0004 /* receive CRC error */ -#define R_OV 0x0002 /* receive overrun */ -#define R_CL 0x0001 /* collision */ -#define ETHER_R_ERROR (R_LG | R_NO | R_SH | R_CR | R_OV | R_CL) - - -/* - * ethernet interrupts - */ -#define ETHERNET_GRA 0x0080 /* graceful stop complete */ -#define ETHERNET_TXE 0x0010 /* transmit error */ -#define ETHERNET_RXF 0x0008 /* receive frame */ -#define ETHERNET_BSY 0x0004 /* busy condition */ -#define ETHERNET_TXB 0x0002 /* transmit buffer */ -#define ETHERNET_RXB 0x0001 /* receive buffer */ - -/* - * ethernet protocol specific mode register (PSMR) - */ -#define ETHER_HBC 0x8000 /* heartbeat checking */ -#define ETHER_FC 0x4000 /* force collision */ -#define ETHER_RSH 0x2000 /* receive short frames */ -#define ETHER_IAM 0x1000 /* individual address mode */ -#define ETHER_CRC_32 (0x2<<10) /* Enable CRC */ -#define ETHER_PRO 0x0200 /* promiscuous */ -#define ETHER_BRO 0x0100 /* broadcast address */ -#define ETHER_SBT 0x0080 /* stop backoff timer */ -#define ETHER_LPB 0x0040 /* Loop Back Mode */ -#define ETHER_SIP 0x0020 /* sample input pins */ -#define ETHER_LCW 0x0010 /* late collision window */ -#define ETHER_NIB_13 (0x0<<1) /* # of ignored bits 13 */ -#define ETHER_NIB_14 (0x1<<1) /* # of ignored bits 14 */ -#define ETHER_NIB_15 (0x2<<1) /* # of ignored bits 15 */ -#define ETHER_NIB_16 (0x3<<1) /* # of ignored bits 16 */ -#define ETHER_NIB_21 (0x4<<1) /* # of ignored bits 21 */ -#define ETHER_NIB_22 (0x5<<1) /* # of ignored bits 22 */ -#define ETHER_NIB_23 (0x6<<1) /* # of ignored bits 23 */ -#define ETHER_NIB_24 (0x7<<1) /* # of ignored bits 24 */ - -/* - * ethernet specific parameters - */ -#define CRC_WORD 4 /* Length in bytes of CRC */ -#define C_PRES 0xffffffff /* preform 32 bit CRC */ -#define C_MASK 0xdebb20e3 /* comply with 32 bit CRC */ -#define CRCEC 0x00000000 -#define ALEC 0x00000000 -#define DISFC 0x00000000 -#define PADS 0x00000000 -#define RET_LIM 0x000f /* retry 15 times to send a frame before interrupt */ -#define ETH_MFLR 0x05ee /* 1518 max frame size */ -#define MINFLR 0x0040 /* Minimum frame size 64 */ -#define MAXD1 0x05ee /* Max dma count 1518 */ -#define MAXD2 0x05ee -#define GADDR1 0x00000000 /* Clear group address */ -#define GADDR2 0x00000000 -#define GADDR3 0x00000000 -#define GADDR4 0x00000000 -#define P_PER 0x00000000 /*not used */ -#define IADDR1 0x00000000 /* Individual hash table not used */ -#define IADDR2 0x00000000 -#define IADDR3 0x00000000 -#define IADDR4 0x00000000 -#define TADDR_H 0x00000000 /* clear this regs */ -#define TADDR_M 0x00000000 -#define TADDR_L 0x00000000 - -/* SCC Parameter Ram */ -#define RFCR 0x18 /* normal operation */ -#define TFCR 0x18 /* normal operation */ -#define E_MRBLR 1518 /* Max ethernet frame length */ - -/* - * ethernet specific structure - */ -typedef union { - unsigned char b[6]; - struct { - unsigned short high; - unsigned short middl; - unsigned short low; - } w; -} ETHER_ADDR; - -typedef struct { - int max_frame_length; - int promisc_mode; - int reject_broadcast; - ETHER_ADDR phys_adr; -} ETHER_SPECIFIC; - -typedef struct { - ETHER_ADDR dst_addr; - ETHER_ADDR src_addr; - unsigned short type_or_len; - unsigned char data[1]; -} ETHER_FRAME; - -#define MAX_DATALEN 1500 -typedef struct { - ETHER_ADDR dst_addr; - ETHER_ADDR src_addr; - unsigned short type_or_len; - unsigned char data[MAX_DATALEN]; - unsigned char fcs[CRC_WORD]; -} ETHER_MAX_FRAME; - - -/* - * Internal ethernet function prototypes - */ -void ether_interrupt(int scc_num); -/* mleslie: debug */ -/* static void ethernet_rx_internal(int scc_num); */ -/* static void ethernet_tx_internal(int scc_num); */ - -/* - * User callable routines prototypes (ethernet specific) - */ -void ethernet_init(int scc_number, - alloc_routine *alloc_buffer, - free_routine *free_buffer, - store_rx_buffer_routine *store_rx_buffer, - handle_tx_error_routine *handle_tx_error, - handle_rx_error_routine *handle_rx_error, - handle_lost_error_routine *handle_lost_error, - ETHER_SPECIFIC *ether_spec); -int ethernet_tx(int scc_number, void *buf, int length); - -#endif - diff --git a/arch/m68knommu/include/asm/m68360_pram.h b/arch/m68knommu/include/asm/m68360_pram.h deleted file mode 100644 index e6088bbce93..00000000000 --- a/arch/m68knommu/include/asm/m68360_pram.h +++ /dev/null @@ -1,431 +0,0 @@ -/*********************************** - * $Id: m68360_pram.h,v 1.1 2002/03/02 15:01:07 gerg Exp $ - *********************************** - * - *************************************** - * Definitions of the parameter area RAM. - * Note that different structures are overlaid - * at the same offsets for the different modes - * of operation. - *************************************** - */ - -#ifndef __PRAM_H -#define __PRAM_H - -/* Time slot assignment table */ -#define VALID_SLOT 0x8000 -#define WRAP_SLOT 0x4000 - -/***************************************************************** - Global Multichannel parameter RAM -*****************************************************************/ -struct global_multi_pram { - /* - * Global Multichannel parameter RAM - */ - unsigned long mcbase; /* Multichannel Base pointer */ - unsigned short qmcstate; /* Multichannel Controller state */ - unsigned short mrblr; /* Maximum Receive Buffer Length */ - unsigned short tx_s_ptr; /* TSTATx Pointer */ - unsigned short rxptr; /* Current Time slot entry in TSATRx */ - unsigned short grfthr; /* Global Receive frame threshold */ - unsigned short grfcnt; /* Global Receive Frame Count */ - unsigned long intbase; /* Multichannel Base address */ - unsigned long iintptr; /* Pointer to interrupt queue */ - unsigned short rx_s_ptr; /* TSTARx Pointer */ - - unsigned short txptr; /* Current Time slot entry in TSATTx */ - unsigned long c_mask32; /* CRC Constant (debb20e3) */ - unsigned short tsatrx[32]; /* Time Slot Assignment Table Rx */ - unsigned short tsattx[32]; /* Time Slot Assignment Table Tx */ - unsigned short c_mask16; /* CRC Constant (f0b8) */ -}; - -/***************************************************************** - Quicc32 HDLC parameter RAM -*****************************************************************/ -struct quicc32_pram { - - unsigned short tbase; /* Tx Buffer Descriptors Base Address */ - unsigned short chamr; /* Channel Mode Register */ - unsigned long tstate; /* Tx Internal State */ - unsigned long txintr; /* Tx Internal Data Pointer */ - unsigned short tbptr; /* Tx Buffer Descriptor Pointer */ - unsigned short txcntr; /* Tx Internal Byte Count */ - unsigned long tupack; /* (Tx Temp) */ - unsigned long zistate; /* Zero Insertion machine state */ - unsigned long tcrc; /* Temp Transmit CRC */ - unsigned short intmask; /* Channel's interrupt mask flags */ - unsigned short bdflags; - unsigned short rbase; /* Rx Buffer Descriptors Base Address */ - unsigned short mflr; /* Max Frame Length Register */ - unsigned long rstate; /* Rx Internal State */ - unsigned long rxintr; /* Rx Internal Data Pointer */ - unsigned short rbptr; /* Rx Buffer Descriptor Pointer */ - unsigned short rxbyc; /* Rx Internal Byte Count */ - unsigned long rpack; /* (Rx Temp) */ - unsigned long zdstate; /* Zero Deletion machine state */ - unsigned long rcrc; /* Temp Transmit CRC */ - unsigned short maxc; /* Max_length counter */ - unsigned short tmp_mb; /* Temp */ -}; - - -/***************************************************************** - HDLC parameter RAM -*****************************************************************/ - -struct hdlc_pram { - /* - * SCC parameter RAM - */ - unsigned short rbase; /* RX BD base address */ - unsigned short tbase; /* TX BD base address */ - unsigned char rfcr; /* Rx function code */ - unsigned char tfcr; /* Tx function code */ - unsigned short mrblr; /* Rx buffer length */ - unsigned long rstate; /* Rx internal state */ - unsigned long rptr; /* Rx internal data pointer */ - unsigned short rbptr; /* rb BD Pointer */ - unsigned short rcount; /* Rx internal byte count */ - unsigned long rtemp; /* Rx temp */ - unsigned long tstate; /* Tx internal state */ - unsigned long tptr; /* Tx internal data pointer */ - unsigned short tbptr; /* Tx BD pointer */ - unsigned short tcount; /* Tx byte count */ - unsigned long ttemp; /* Tx temp */ - unsigned long rcrc; /* temp receive CRC */ - unsigned long tcrc; /* temp transmit CRC */ - - /* - * HDLC specific parameter RAM - */ - unsigned char RESERVED1[4]; /* Reserved area */ - unsigned long c_mask; /* CRC constant */ - unsigned long c_pres; /* CRC preset */ - unsigned short disfc; /* discarded frame counter */ - unsigned short crcec; /* CRC error counter */ - unsigned short abtsc; /* abort sequence counter */ - unsigned short nmarc; /* nonmatching address rx cnt */ - unsigned short retrc; /* frame retransmission cnt */ - unsigned short mflr; /* maximum frame length reg */ - unsigned short max_cnt; /* maximum length counter */ - unsigned short rfthr; /* received frames threshold */ - unsigned short rfcnt; /* received frames count */ - unsigned short hmask; /* user defined frm addr mask */ - unsigned short haddr1; /* user defined frm address 1 */ - unsigned short haddr2; /* user defined frm address 2 */ - unsigned short haddr3; /* user defined frm address 3 */ - unsigned short haddr4; /* user defined frm address 4 */ - unsigned short tmp; /* temp */ - unsigned short tmp_mb; /* temp */ -}; - - - -/***************************************************************** - UART parameter RAM -*****************************************************************/ - -/* - * bits in uart control characters table - */ -#define CC_INVALID 0x8000 /* control character is valid */ -#define CC_REJ 0x4000 /* don't store char in buffer */ -#define CC_CHAR 0x00ff /* control character */ - -/* UART */ -struct uart_pram { - /* - * SCC parameter RAM - */ - unsigned short rbase; /* RX BD base address */ - unsigned short tbase; /* TX BD base address */ - unsigned char rfcr; /* Rx function code */ - unsigned char tfcr; /* Tx function code */ - unsigned short mrblr; /* Rx buffer length */ - unsigned long rstate; /* Rx internal state */ - unsigned long rptr; /* Rx internal data pointer */ - unsigned short rbptr; /* rb BD Pointer */ - unsigned short rcount; /* Rx internal byte count */ - unsigned long rx_temp; /* Rx temp */ - unsigned long tstate; /* Tx internal state */ - unsigned long tptr; /* Tx internal data pointer */ - unsigned short tbptr; /* Tx BD pointer */ - unsigned short tcount; /* Tx byte count */ - unsigned long ttemp; /* Tx temp */ - unsigned long rcrc; /* temp receive CRC */ - unsigned long tcrc; /* temp transmit CRC */ - - /* - * UART specific parameter RAM - */ - unsigned char RESERVED1[8]; /* Reserved area */ - unsigned short max_idl; /* maximum idle characters */ - unsigned short idlc; /* rx idle counter (internal) */ - unsigned short brkcr; /* break count register */ - - unsigned short parec; /* Rx parity error counter */ - unsigned short frmer; /* Rx framing error counter */ - unsigned short nosec; /* Rx noise counter */ - unsigned short brkec; /* Rx break character counter */ - unsigned short brkln; /* Reaceive break length */ - - unsigned short uaddr1; /* address character 1 */ - unsigned short uaddr2; /* address character 2 */ - unsigned short rtemp; /* temp storage */ - unsigned short toseq; /* Tx out of sequence char */ - unsigned short cc[8]; /* Rx control characters */ - unsigned short rccm; /* Rx control char mask */ - unsigned short rccr; /* Rx control char register */ - unsigned short rlbc; /* Receive last break char */ -}; - - - -/***************************************************************** - BISYNC parameter RAM -*****************************************************************/ - -struct bisync_pram { - /* - * SCC parameter RAM - */ - unsigned short rbase; /* RX BD base address */ - unsigned short tbase; /* TX BD base address */ - unsigned char rfcr; /* Rx function code */ - unsigned char tfcr; /* Tx function code */ - unsigned short mrblr; /* Rx buffer length */ - unsigned long rstate; /* Rx internal state */ - unsigned long rptr; /* Rx internal data pointer */ - unsigned short rbptr; /* rb BD Pointer */ - unsigned short rcount; /* Rx internal byte count */ - unsigned long rtemp; /* Rx temp */ - unsigned long tstate; /* Tx internal state */ - unsigned long tptr; /* Tx internal data pointer */ - unsigned short tbptr; /* Tx BD pointer */ - unsigned short tcount; /* Tx byte count */ - unsigned long ttemp; /* Tx temp */ - unsigned long rcrc; /* temp receive CRC */ - unsigned long tcrc; /* temp transmit CRC */ - - /* - * BISYNC specific parameter RAM - */ - unsigned char RESERVED1[4]; /* Reserved area */ - unsigned long crcc; /* CRC Constant Temp Value */ - unsigned short prcrc; /* Preset Receiver CRC-16/LRC */ - unsigned short ptcrc; /* Preset Transmitter CRC-16/LRC */ - unsigned short parec; /* Receive Parity Error Counter */ - unsigned short bsync; /* BISYNC SYNC Character */ - unsigned short bdle; /* BISYNC DLE Character */ - unsigned short cc[8]; /* Rx control characters */ - unsigned short rccm; /* Receive Control Character Mask */ -}; - -/***************************************************************** - IOM2 parameter RAM - (overlaid on tx bd[5] of SCC channel[2]) -*****************************************************************/ -struct iom2_pram { - unsigned short ci_data; /* ci data */ - unsigned short monitor_data; /* monitor data */ - unsigned short tstate; /* transmitter state */ - unsigned short rstate; /* receiver state */ -}; - -/***************************************************************** - SPI/SMC parameter RAM - (overlaid on tx bd[6,7] of SCC channel[2]) -*****************************************************************/ - -#define SPI_R 0x8000 /* Ready bit in BD */ - -struct spi_pram { - unsigned short rbase; /* Rx BD Base Address */ - unsigned short tbase; /* Tx BD Base Address */ - unsigned char rfcr; /* Rx function code */ - unsigned char tfcr; /* Tx function code */ - unsigned short mrblr; /* Rx buffer length */ - unsigned long rstate; /* Rx internal state */ - unsigned long rptr; /* Rx internal data pointer */ - unsigned short rbptr; /* rb BD Pointer */ - unsigned short rcount; /* Rx internal byte count */ - unsigned long rtemp; /* Rx temp */ - unsigned long tstate; /* Tx internal state */ - unsigned long tptr; /* Tx internal data pointer */ - unsigned short tbptr; /* Tx BD pointer */ - unsigned short tcount; /* Tx byte count */ - unsigned long ttemp; /* Tx temp */ -}; - -struct smc_uart_pram { - unsigned short rbase; /* Rx BD Base Address */ - unsigned short tbase; /* Tx BD Base Address */ - unsigned char rfcr; /* Rx function code */ - unsigned char tfcr; /* Tx function code */ - unsigned short mrblr; /* Rx buffer length */ - unsigned long rstate; /* Rx internal state */ - unsigned long rptr; /* Rx internal data pointer */ - unsigned short rbptr; /* rb BD Pointer */ - unsigned short rcount; /* Rx internal byte count */ - unsigned long rtemp; /* Rx temp */ - unsigned long tstate; /* Tx internal state */ - unsigned long tptr; /* Tx internal data pointer */ - unsigned short tbptr; /* Tx BD pointer */ - unsigned short tcount; /* Tx byte count */ - unsigned long ttemp; /* Tx temp */ - unsigned short max_idl; /* Maximum IDLE Characters */ - unsigned short idlc; /* Temporary IDLE Counter */ - unsigned short brkln; /* Last Rx Break Length */ - unsigned short brkec; /* Rx Break Condition Counter */ - unsigned short brkcr; /* Break Count Register (Tx) */ - unsigned short r_mask; /* Temporary bit mask */ -}; - -struct smc_trnsp_pram { - unsigned short rbase; /* rx BD Base Address */ - unsigned short tbase; /* Tx BD Base Address */ - unsigned char rfcr; /* Rx function code */ - unsigned char tfcr; /* Tx function code */ - unsigned short mrblr; /* Rx buffer length */ - unsigned long rstate; /* Rx internal state */ - unsigned long rptr; /* Rx internal data pointer */ - unsigned short rbptr; /* rb BD Pointer */ - unsigned short rcount; /* Rx internal byte count */ - unsigned long rtemp; /* Rx temp */ - unsigned long tstate; /* Tx internal state */ - unsigned long tptr; /* Tx internal data pointer */ - unsigned short tbptr; /* Tx BD pointer */ - unsigned short tcount; /* Tx byte count */ - unsigned long ttemp; /* Tx temp */ - unsigned short reserved[5]; /* Reserved */ -}; - -struct idma_pram { - unsigned short ibase; /* IDMA BD Base Address */ - unsigned short ibptr; /* IDMA buffer descriptor pointer */ - unsigned long istate; /* IDMA internal state */ - unsigned long itemp; /* IDMA temp */ -}; - -struct ethernet_pram { - /* - * SCC parameter RAM - */ - unsigned short rbase; /* RX BD base address */ - unsigned short tbase; /* TX BD base address */ - unsigned char rfcr; /* Rx function code */ - unsigned char tfcr; /* Tx function code */ - unsigned short mrblr; /* Rx buffer length */ - unsigned long rstate; /* Rx internal state */ - unsigned long rptr; /* Rx internal data pointer */ - unsigned short rbptr; /* rb BD Pointer */ - unsigned short rcount; /* Rx internal byte count */ - unsigned long rtemp; /* Rx temp */ - unsigned long tstate; /* Tx internal state */ - unsigned long tptr; /* Tx internal data pointer */ - unsigned short tbptr; /* Tx BD pointer */ - unsigned short tcount; /* Tx byte count */ - unsigned long ttemp; /* Tx temp */ - unsigned long rcrc; /* temp receive CRC */ - unsigned long tcrc; /* temp transmit CRC */ - - /* - * ETHERNET specific parameter RAM - */ - unsigned long c_pres; /* preset CRC */ - unsigned long c_mask; /* constant mask for CRC */ - unsigned long crcec; /* CRC error counter */ - unsigned long alec; /* alighnment error counter */ - unsigned long disfc; /* discard frame counter */ - unsigned short pads; /* short frame PAD characters */ - unsigned short ret_lim; /* retry limit threshold */ - unsigned short ret_cnt; /* retry limit counter */ - unsigned short mflr; /* maximum frame length reg */ - unsigned short minflr; /* minimum frame length reg */ - unsigned short maxd1; /* maximum DMA1 length reg */ - unsigned short maxd2; /* maximum DMA2 length reg */ - unsigned short maxd; /* rx max DMA */ - unsigned short dma_cnt; /* rx dma counter */ - unsigned short max_b; /* max bd byte count */ - unsigned short gaddr1; /* group address filter 1 */ - unsigned short gaddr2; /* group address filter 2 */ - unsigned short gaddr3; /* group address filter 3 */ - unsigned short gaddr4; /* group address filter 4 */ - unsigned long tbuf0_data0; /* save area 0 - current frm */ - unsigned long tbuf0_data1; /* save area 1 - current frm */ - unsigned long tbuf0_rba0; - unsigned long tbuf0_crc; - unsigned short tbuf0_bcnt; - union { - unsigned char b[6]; - struct { - unsigned short high; - unsigned short middl; - unsigned short low; - } w; - } paddr; - unsigned short p_per; /* persistence */ - unsigned short rfbd_ptr; /* rx first bd pointer */ - unsigned short tfbd_ptr; /* tx first bd pointer */ - unsigned short tlbd_ptr; /* tx last bd pointer */ - unsigned long tbuf1_data0; /* save area 0 - next frame */ - unsigned long tbuf1_data1; /* save area 1 - next frame */ - unsigned long tbuf1_rba0; - unsigned long tbuf1_crc; - unsigned short tbuf1_bcnt; - unsigned short tx_len; /* tx frame length counter */ - unsigned short iaddr1; /* individual address filter 1*/ - unsigned short iaddr2; /* individual address filter 2*/ - unsigned short iaddr3; /* individual address filter 3*/ - unsigned short iaddr4; /* individual address filter 4*/ - unsigned short boff_cnt; /* back-off counter */ - unsigned short taddr_h; /* temp address (MSB) */ - unsigned short taddr_m; /* temp address */ - unsigned short taddr_l; /* temp address (LSB) */ -}; - -struct transparent_pram { - /* - * SCC parameter RAM - */ - unsigned short rbase; /* RX BD base address */ - unsigned short tbase; /* TX BD base address */ - unsigned char rfcr; /* Rx function code */ - unsigned char tfcr; /* Tx function code */ - unsigned short mrblr; /* Rx buffer length */ - unsigned long rstate; /* Rx internal state */ - unsigned long rptr; /* Rx internal data pointer */ - unsigned short rbptr; /* rb BD Pointer */ - unsigned short rcount; /* Rx internal byte count */ - unsigned long rtemp; /* Rx temp */ - unsigned long tstate; /* Tx internal state */ - unsigned long tptr; /* Tx internal data pointer */ - unsigned short tbptr; /* Tx BD pointer */ - unsigned short tcount; /* Tx byte count */ - unsigned long ttemp; /* Tx temp */ - unsigned long rcrc; /* temp receive CRC */ - unsigned long tcrc; /* temp transmit CRC */ - - /* - * TRANSPARENT specific parameter RAM - */ - unsigned long crc_p; /* CRC Preset */ - unsigned long crc_c; /* CRC constant */ -}; - -struct timer_pram { - /* - * RISC timers parameter RAM - */ - unsigned short tm_base; /* RISC timer table base adr */ - unsigned short tm_ptr; /* RISC timer table pointer */ - unsigned short r_tmr; /* RISC timer mode register */ - unsigned short r_tmv; /* RISC timer valid register */ - unsigned long tm_cmd; /* RISC timer cmd register */ - unsigned long tm_cnt; /* RISC timer internal cnt */ -}; - -#endif diff --git a/arch/m68knommu/include/asm/m68360_quicc.h b/arch/m68knommu/include/asm/m68360_quicc.h deleted file mode 100644 index 6d40f4d18e1..00000000000 --- a/arch/m68knommu/include/asm/m68360_quicc.h +++ /dev/null @@ -1,362 +0,0 @@ -/*********************************** - * $Id: m68360_quicc.h,v 1.1 2002/03/02 15:01:07 gerg Exp $ - *********************************** - * - *************************************** - * Definitions of QUICC memory structures - *************************************** - */ - -#ifndef __M68360_QUICC_H -#define __M68360_QUICC_H - -/* - * include registers and - * parameter ram definitions files - */ -#include <asm/m68360_regs.h> -#include <asm/m68360_pram.h> - - - -/* Buffer Descriptors */ -typedef struct quicc_bd { - volatile unsigned short status; - volatile unsigned short length; - volatile unsigned char *buf; /* WARNING: This is only true if *char is 32 bits */ -} QUICC_BD; - - -#ifdef MOTOROLA_ORIGINAL -struct user_data { - /* BASE + 0x000: user data memory */ - volatile unsigned char udata_bd_ucode[0x400]; /*user data bd's Ucode*/ - volatile unsigned char udata_bd[0x200]; /*user data Ucode */ - volatile unsigned char ucode_ext[0x100]; /*Ucode Extention ram */ - volatile unsigned char RESERVED1[0x500]; /* Reserved area */ -}; -#else -struct user_data { - /* BASE + 0x000: user data memory */ - volatile unsigned char udata_bd_ucode[0x400]; /* user data, bds, Ucode*/ - volatile unsigned char udata_bd1[0x200]; /* user, bds */ - volatile unsigned char ucode_bd_scratch[0x100]; /* user, bds, ucode scratch */ - volatile unsigned char udata_bd2[0x100]; /* user, bds */ - volatile unsigned char RESERVED1[0x400]; /* Reserved area */ -}; -#endif - - -/* - * internal ram - */ -typedef struct quicc { - union { - struct quicc32_pram ch_pram_tbl[32]; /* 32*64(bytes) per channel */ - struct user_data u; - }ch_or_u; /* multipul or user space */ - - /* BASE + 0xc00: PARAMETER RAM */ - union { - struct scc_pram { - union { - struct hdlc_pram h; - struct uart_pram u; - struct bisync_pram b; - struct transparent_pram t; - unsigned char RESERVED66[0x70]; - } pscc; /* scc parameter area (protocol dependent) */ - union { - struct { - unsigned char RESERVED70[0x10]; - struct spi_pram spi; - unsigned char RESERVED72[0x8]; - struct timer_pram timer; - } timer_spi; - struct { - struct idma_pram idma; - unsigned char RESERVED67[0x4]; - union { - struct smc_uart_pram u; - struct smc_trnsp_pram t; - } psmc; - } idma_smc; - } pothers; - } scc; - struct ethernet_pram enet_scc; - struct global_multi_pram m; - unsigned char pr[0x100]; - } pram[4]; - - /* reserved */ - - /* BASE + 0x1000: INTERNAL REGISTERS */ - /* SIM */ - volatile unsigned long sim_mcr; /* module configuration reg */ - volatile unsigned short sim_simtr; /* module test register */ - volatile unsigned char RESERVED2[0x2]; /* Reserved area */ - volatile unsigned char sim_avr; /* auto vector reg */ - volatile unsigned char sim_rsr; /* reset status reg */ - volatile unsigned char RESERVED3[0x2]; /* Reserved area */ - volatile unsigned char sim_clkocr; /* CLCO control register */ - volatile unsigned char RESERVED62[0x3]; /* Reserved area */ - volatile unsigned short sim_pllcr; /* PLL control register */ - volatile unsigned char RESERVED63[0x2]; /* Reserved area */ - volatile unsigned short sim_cdvcr; /* Clock devider control register */ - volatile unsigned short sim_pepar; /* Port E pin assignment register */ - volatile unsigned char RESERVED64[0xa]; /* Reserved area */ - volatile unsigned char sim_sypcr; /* system protection control*/ - volatile unsigned char sim_swiv; /* software interrupt vector*/ - volatile unsigned char RESERVED6[0x2]; /* Reserved area */ - volatile unsigned short sim_picr; /* periodic interrupt control reg */ - volatile unsigned char RESERVED7[0x2]; /* Reserved area */ - volatile unsigned short sim_pitr; /* periodic interrupt timing reg */ - volatile unsigned char RESERVED8[0x3]; /* Reserved area */ - volatile unsigned char sim_swsr; /* software service */ - volatile unsigned long sim_bkar; /* breakpoint address register*/ - volatile unsigned long sim_bkcr; /* breakpoint control register*/ - volatile unsigned char RESERVED10[0x8]; /* Reserved area */ - /* MEMC */ - volatile unsigned long memc_gmr; /* Global memory register */ - volatile unsigned short memc_mstat; /* MEMC status register */ - volatile unsigned char RESERVED11[0xa]; /* Reserved area */ - volatile unsigned long memc_br0; /* base register 0 */ - volatile unsigned long memc_or0; /* option register 0 */ - volatile unsigned char RESERVED12[0x8]; /* Reserved area */ - volatile unsigned long memc_br1; /* base register 1 */ - volatile unsigned long memc_or1; /* option register 1 */ - volatile unsigned char RESERVED13[0x8]; /* Reserved area */ - volatile unsigned long memc_br2; /* base register 2 */ - volatile unsigned long memc_or2; /* option register 2 */ - volatile unsigned char RESERVED14[0x8]; /* Reserved area */ - volatile unsigned long memc_br3; /* base register 3 */ - volatile unsigned long memc_or3; /* option register 3 */ - volatile unsigned char RESERVED15[0x8]; /* Reserved area */ - volatile unsigned long memc_br4; /* base register 3 */ - volatile unsigned long memc_or4; /* option register 3 */ - volatile unsigned char RESERVED16[0x8]; /* Reserved area */ - volatile unsigned long memc_br5; /* base register 3 */ - volatile unsigned long memc_or5; /* option register 3 */ - volatile unsigned char RESERVED17[0x8]; /* Reserved area */ - volatile unsigned long memc_br6; /* base register 3 */ - volatile unsigned long memc_or6; /* option register 3 */ - volatile unsigned char RESERVED18[0x8]; /* Reserved area */ - volatile unsigned long memc_br7; /* base register 3 */ - volatile unsigned long memc_or7; /* option register 3 */ - volatile unsigned char RESERVED9[0x28]; /* Reserved area */ - /* TEST */ - volatile unsigned short test_tstmra; /* master shift a */ - volatile unsigned short test_tstmrb; /* master shift b */ - volatile unsigned short test_tstsc; /* shift count */ - volatile unsigned short test_tstrc; /* repetition counter */ - volatile unsigned short test_creg; /* control */ - volatile unsigned short test_dreg; /* destributed register */ - volatile unsigned char RESERVED58[0x404]; /* Reserved area */ - /* IDMA1 */ - volatile unsigned short idma_iccr; /* channel configuration reg*/ - volatile unsigned char RESERVED19[0x2]; /* Reserved area */ - volatile unsigned short idma1_cmr; /* dma mode reg */ - volatile unsigned char RESERVED68[0x2]; /* Reserved area */ - volatile unsigned long idma1_sapr; /* dma source addr ptr */ - volatile unsigned long idma1_dapr; /* dma destination addr ptr */ - volatile unsigned long idma1_bcr; /* dma byte count reg */ - volatile unsigned char idma1_fcr; /* function code reg */ - volatile unsigned char RESERVED20; /* Reserved area */ - volatile unsigned char idma1_cmar; /* channel mask reg */ - volatile unsigned char RESERVED21; /* Reserved area */ - volatile unsigned char idma1_csr; /* channel status reg */ - volatile unsigned char RESERVED22[0x3]; /* Reserved area */ - /* SDMA */ - volatile unsigned char sdma_sdsr; /* status reg */ - volatile unsigned char RESERVED23; /* Reserved area */ - volatile unsigned short sdma_sdcr; /* configuration reg */ - volatile unsigned long sdma_sdar; /* address reg */ - /* IDMA2 */ - volatile unsigned char RESERVED69[0x2]; /* Reserved area */ - volatile unsigned short idma2_cmr; /* dma mode reg */ - volatile unsigned long idma2_sapr; /* dma source addr ptr */ - volatile unsigned long idma2_dapr; /* dma destination addr ptr */ - volatile unsigned long idma2_bcr; /* dma byte count reg */ - volatile unsigned char idma2_fcr; /* function code reg */ - volatile unsigned char RESERVED24; /* Reserved area */ - volatile unsigned char idma2_cmar; /* channel mask reg */ - volatile unsigned char RESERVED25; /* Reserved area */ - volatile unsigned char idma2_csr; /* channel status reg */ - volatile unsigned char RESERVED26[0x7]; /* Reserved area */ - /* Interrupt Controller */ - volatile unsigned long intr_cicr; /* CP interrupt configuration reg*/ - volatile unsigned long intr_cipr; /* CP interrupt pending reg */ - volatile unsigned long intr_cimr; /* CP interrupt mask reg */ - volatile unsigned long intr_cisr; /* CP interrupt in service reg*/ - /* Parallel I/O */ - volatile unsigned short pio_padir; /* port A data direction reg */ - volatile unsigned short pio_papar; /* port A pin assignment reg */ - volatile unsigned short pio_paodr; /* port A open drain reg */ - volatile unsigned short pio_padat; /* port A data register */ - volatile unsigned char RESERVED28[0x8]; /* Reserved area */ - volatile unsigned short pio_pcdir; /* port C data direction reg*/ - volatile unsigned short pio_pcpar; /* port C pin assignment reg*/ - volatile unsigned short pio_pcso; /* port C special options */ - volatile unsigned short pio_pcdat; /* port C data register */ - volatile unsigned short pio_pcint; /* port C interrupt cntrl reg */ - volatile unsigned char RESERVED29[0x16]; /* Reserved area */ - /* Timer */ - volatile unsigned short timer_tgcr; /* timer global configuration reg */ - volatile unsigned char RESERVED30[0xe]; /* Reserved area */ - volatile unsigned short timer_tmr1; /* timer 1 mode reg */ - volatile unsigned short timer_tmr2; /* timer 2 mode reg */ - volatile unsigned short timer_trr1; /* timer 1 referance reg */ - volatile unsigned short timer_trr2; /* timer 2 referance reg */ - volatile unsigned short timer_tcr1; /* timer 1 capture reg */ - volatile unsigned short timer_tcr2; /* timer 2 capture reg */ - volatile unsigned short timer_tcn1; /* timer 1 counter reg */ - volatile unsigned short timer_tcn2; /* timer 2 counter reg */ - volatile unsigned short timer_tmr3; /* timer 3 mode reg */ - volatile unsigned short timer_tmr4; /* timer 4 mode reg */ - volatile unsigned short timer_trr3; /* timer 3 referance reg */ - volatile unsigned short timer_trr4; /* timer 4 referance reg */ - volatile unsigned short timer_tcr3; /* timer 3 capture reg */ - volatile unsigned short timer_tcr4; /* timer 4 capture reg */ - volatile unsigned short timer_tcn3; /* timer 3 counter reg */ - volatile unsigned short timer_tcn4; /* timer 4 counter reg */ - volatile unsigned short timer_ter1; /* timer 1 event reg */ - volatile unsigned short timer_ter2; /* timer 2 event reg */ - volatile unsigned short timer_ter3; /* timer 3 event reg */ - volatile unsigned short timer_ter4; /* timer 4 event reg */ - volatile unsigned char RESERVED34[0x8]; /* Reserved area */ - /* CP */ - volatile unsigned short cp_cr; /* command register */ - volatile unsigned char RESERVED35[0x2]; /* Reserved area */ - volatile unsigned short cp_rccr; /* main configuration reg */ - volatile unsigned char RESERVED37; /* Reserved area */ - volatile unsigned char cp_rmds; /* development support status reg */ - volatile unsigned long cp_rmdr; /* development support control reg */ - volatile unsigned short cp_rctr1; /* ram break register 1 */ - volatile unsigned short cp_rctr2; /* ram break register 2 */ - volatile unsigned short cp_rctr3; /* ram break register 3 */ - volatile unsigned short cp_rctr4; /* ram break register 4 */ - volatile unsigned char RESERVED59[0x2]; /* Reserved area */ - volatile unsigned short cp_rter; /* RISC timers event reg */ - volatile unsigned char RESERVED38[0x2]; /* Reserved area */ - volatile unsigned short cp_rtmr; /* RISC timers mask reg */ - volatile unsigned char RESERVED39[0x14]; /* Reserved area */ - /* BRG */ - union { - volatile unsigned long l; - struct { - volatile unsigned short BRGC_RESERV:14; - volatile unsigned short rst:1; - volatile unsigned short en:1; - volatile unsigned short extc:2; - volatile unsigned short atb:1; - volatile unsigned short cd:12; - volatile unsigned short div16:1; - } b; - } brgc[4]; /* BRG1-BRG4 configuration regs*/ - /* SCC registers */ - struct scc_regs { - union { - struct { - /* Low word. */ - volatile unsigned short GSMR_RESERV2:1; - volatile unsigned short edge:2; - volatile unsigned short tci:1; - volatile unsigned short tsnc:2; - volatile unsigned short rinv:1; - volatile unsigned short tinv:1; - volatile unsigned short tpl:3; - volatile unsigned short tpp:2; - volatile unsigned short tend:1; - volatile unsigned short tdcr:2; - volatile unsigned short rdcr:2; - volatile unsigned short renc:3; - volatile unsigned short tenc:3; - volatile unsigned short diag:2; - volatile unsigned short enr:1; - volatile unsigned short ent:1; - volatile unsigned short mode:4; - /* High word. */ - volatile unsigned short GSMR_RESERV1:14; - volatile unsigned short pri:1; - volatile unsigned short gde:1; - volatile unsigned short tcrc:2; - volatile unsigned short revd:1; - volatile unsigned short trx:1; - volatile unsigned short ttx:1; - volatile unsigned short cdp:1; - volatile unsigned short ctsp:1; - volatile unsigned short cds:1; - volatile unsigned short ctss:1; - volatile unsigned short tfl:1; - volatile unsigned short rfw:1; - volatile unsigned short txsy:1; - volatile unsigned short synl:2; - volatile unsigned short rtsm:1; - volatile unsigned short rsyn:1; - } b; - struct { - volatile unsigned long low; - volatile unsigned long high; - } w; - } scc_gsmr; /* SCC general mode reg */ - volatile unsigned short scc_psmr; /* protocol specific mode reg */ - volatile unsigned char RESERVED42[0x2]; /* Reserved area */ - volatile unsigned short scc_todr; /* SCC transmit on demand */ - volatile unsigned short scc_dsr; /* SCC data sync reg */ - volatile unsigned short scc_scce; /* SCC event reg */ - volatile unsigned char RESERVED43[0x2];/* Reserved area */ - volatile unsigned short scc_sccm; /* SCC mask reg */ - volatile unsigned char RESERVED44[0x1];/* Reserved area */ - volatile unsigned char scc_sccs; /* SCC status reg */ - volatile unsigned char RESERVED45[0x8]; /* Reserved area */ - } scc_regs[4]; - /* SMC */ - struct smc_regs { - volatile unsigned char RESERVED46[0x2]; /* Reserved area */ - volatile unsigned short smc_smcmr; /* SMC mode reg */ - volatile unsigned char RESERVED60[0x2]; /* Reserved area */ - volatile unsigned char smc_smce; /* SMC event reg */ - volatile unsigned char RESERVED47[0x3]; /* Reserved area */ - volatile unsigned char smc_smcm; /* SMC mask reg */ - volatile unsigned char RESERVED48[0x5]; /* Reserved area */ - } smc_regs[2]; - /* SPI */ - volatile unsigned short spi_spmode; /* SPI mode reg */ - volatile unsigned char RESERVED51[0x4]; /* Reserved area */ - volatile unsigned char spi_spie; /* SPI event reg */ - volatile unsigned char RESERVED52[0x3]; /* Reserved area */ - volatile unsigned char spi_spim; /* SPI mask reg */ - volatile unsigned char RESERVED53[0x2]; /* Reserved area */ - volatile unsigned char spi_spcom; /* SPI command reg */ - volatile unsigned char RESERVED54[0x4]; /* Reserved area */ - /* PIP */ - volatile unsigned short pip_pipc; /* pip configuration reg */ - volatile unsigned char RESERVED65[0x2]; /* Reserved area */ - volatile unsigned short pip_ptpr; /* pip timing parameters reg */ - volatile unsigned long pip_pbdir; /* port b data direction reg */ - volatile unsigned long pip_pbpar; /* port b pin assignment reg */ - volatile unsigned long pip_pbodr; /* port b open drain reg */ - volatile unsigned long pip_pbdat; /* port b data reg */ - volatile unsigned char RESERVED71[0x18]; /* Reserved area */ - /* Serial Interface */ - volatile unsigned long si_simode; /* SI mode register */ - volatile unsigned char si_sigmr; /* SI global mode register */ - volatile unsigned char RESERVED55; /* Reserved area */ - volatile unsigned char si_sistr; /* SI status register */ - volatile unsigned char si_sicmr; /* SI command register */ - volatile unsigned char RESERVED56[0x4]; /* Reserved area */ - volatile unsigned long si_sicr; /* SI clock routing */ - volatile unsigned long si_sirp; /* SI ram pointers */ - volatile unsigned char RESERVED57[0xc]; /* Reserved area */ - volatile unsigned short si_siram[0x80]; /* SI routing ram */ -} QUICC; - -#endif - -/* - * Local variables: - * c-indent-level: 4 - * c-basic-offset: 4 - * tab-width: 4 - * End: - */ diff --git a/arch/m68knommu/include/asm/m68360_regs.h b/arch/m68knommu/include/asm/m68360_regs.h deleted file mode 100644 index d57217ca4f2..00000000000 --- a/arch/m68knommu/include/asm/m68360_regs.h +++ /dev/null @@ -1,408 +0,0 @@ -/*********************************** - * $Id: m68360_regs.h,v 1.2 2002/10/26 15:03:55 gerg Exp $ - *********************************** - * - *************************************** - * Definitions of the QUICC registers - *************************************** - */ - -#ifndef __REGISTERS_H -#define __REGISTERS_H - -#define CLEAR_BIT(x, bit) x =bit - -/***************************************************************** - Command Register -*****************************************************************/ - -/* bit fields within command register */ -#define SOFTWARE_RESET 0x8000 -#define CMD_OPCODE 0x0f00 -#define CMD_CHANNEL 0x00f0 -#define CMD_FLAG 0x0001 - -/* general command opcodes */ -#define INIT_RXTX_PARAMS 0x0000 -#define INIT_RX_PARAMS 0x0100 -#define INIT_TX_PARAMS 0x0200 -#define ENTER_HUNT_MODE 0x0300 -#define STOP_TX 0x0400 -#define GR_STOP_TX 0x0500 -#define RESTART_TX 0x0600 -#define CLOSE_RX_BD 0x0700 -#define SET_ENET_GROUP 0x0800 -#define RESET_ENET_GROUP 0x0900 - -/* quicc32 CP commands */ -#define STOP_TX_32 0x0e00 /*add chan# bits 2-6 */ -#define ENTER_HUNT_MODE_32 0x1e00 - -/* quicc32 mask/event SCC register */ -#define GOV 0x01 -#define GUN 0x02 -#define GINT 0x04 -#define IQOV 0x08 - - -/* Timer commands */ -#define SET_TIMER 0x0800 - -/* Multi channel Interrupt structure */ -#define INTR_VALID 0x8000 /* Valid interrupt entry */ -#define INTR_WRAP 0x4000 /* Wrap bit in the interrupt entry table */ -#define INTR_CH_NU 0x07c0 /* Channel Num in interrupt table */ -#define INTR_MASK_BITS 0x383f - -/* - * General SCC mode register (GSMR) - */ - -#define MODE_HDLC 0x0 -#define MODE_APPLE_TALK 0x2 -#define MODE_SS7 0x3 -#define MODE_UART 0x4 -#define MODE_PROFIBUS 0x5 -#define MODE_ASYNC_HDLC 0x6 -#define MODE_V14 0x7 -#define MODE_BISYNC 0x8 -#define MODE_DDCMP 0x9 -#define MODE_MULTI_CHANNEL 0xa -#define MODE_ETHERNET 0xc - -#define DIAG_NORMAL 0x0 -#define DIAG_LOCAL_LPB 0x1 -#define DIAG_AUTO_ECHO 0x2 -#define DIAG_LBP_ECHO 0x3 - -/* For RENC and TENC fields in GSMR */ -#define ENC_NRZ 0x0 -#define ENC_NRZI 0x1 -#define ENC_FM0 0x2 -#define ENC_MANCH 0x4 -#define ENC_DIFF_MANC 0x6 - -/* For TDCR and RDCR fields in GSMR */ -#define CLOCK_RATE_1 0x0 -#define CLOCK_RATE_8 0x1 -#define CLOCK_RATE_16 0x2 -#define CLOCK_RATE_32 0x3 - -#define TPP_00 0x0 -#define TPP_10 0x1 -#define TPP_01 0x2 -#define TPP_11 0x3 - -#define TPL_NO 0x0 -#define TPL_8 0x1 -#define TPL_16 0x2 -#define TPL_32 0x3 -#define TPL_48 0x4 -#define TPL_64 0x5 -#define TPL_128 0x6 - -#define TSNC_INFINITE 0x0 -#define TSNC_14_65 0x1 -#define TSNC_4_15 0x2 -#define TSNC_3_1 0x3 - -#define EDGE_BOTH 0x0 -#define EDGE_POS 0x1 -#define EDGE_NEG 0x2 -#define EDGE_NO 0x3 - -#define SYNL_NO 0x0 -#define SYNL_4 0x1 -#define SYNL_8 0x2 -#define SYNL_16 0x3 - -#define TCRC_CCITT16 0x0 -#define TCRC_CRC16 0x1 -#define TCRC_CCITT32 0x2 - - -/***************************************************************** - TODR (Transmit on demand) Register -*****************************************************************/ -#define TODR_TOD 0x8000 /* Transmit on demand */ - - -/***************************************************************** - CICR register settings -*****************************************************************/ - -/* note that relative irq priorities of the SCCs can be reordered - * if desired - see p. 7-377 of the MC68360UM */ -#define CICR_SCA_SCC1 ((uint)0x00000000) /* SCC1 @ SCCa */ -#define CICR_SCB_SCC2 ((uint)0x00040000) /* SCC2 @ SCCb */ -#define CICR_SCC_SCC3 ((uint)0x00200000) /* SCC3 @ SCCc */ -#define CICR_SCD_SCC4 ((uint)0x00c00000) /* SCC4 @ SCCd */ - -#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrupt */ -#define CICR_HP_MASK ((uint)0x00001f00) /* Hi-pri int. */ -#define CICR_VBA_MASK ((uint)0x000000e0) /* Vector Base Address */ -#define CICR_SPS ((uint)0x00000001) /* SCC Spread */ - - -/***************************************************************** - Interrupt bits for CIPR and CIMR (MC68360UM p. 7-379) -*****************************************************************/ - -#define INTR_PIO_PC0 0x80000000 /* parallel I/O C bit 0 */ -#define INTR_SCC1 0x40000000 /* SCC port 1 */ -#define INTR_SCC2 0x20000000 /* SCC port 2 */ -#define INTR_SCC3 0x10000000 /* SCC port 3 */ -#define INTR_SCC4 0x08000000 /* SCC port 4 */ -#define INTR_PIO_PC1 0x04000000 /* parallel i/o C bit 1 */ -#define INTR_TIMER1 0x02000000 /* timer 1 */ -#define INTR_PIO_PC2 0x01000000 /* parallel i/o C bit 2 */ -#define INTR_PIO_PC3 0x00800000 /* parallel i/o C bit 3 */ -#define INTR_SDMA_BERR 0x00400000 /* SDMA channel bus error */ -#define INTR_DMA1 0x00200000 /* idma 1 */ -#define INTR_DMA2 0x00100000 /* idma 2 */ -#define INTR_TIMER2 0x00040000 /* timer 2 */ -#define INTR_CP_TIMER 0x00020000 /* CP timer */ -#define INTR_PIP_STATUS 0x00010000 /* PIP status */ -#define INTR_PIO_PC4 0x00008000 /* parallel i/o C bit 4 */ -#define INTR_PIO_PC5 0x00004000 /* parallel i/o C bit 5 */ -#define INTR_TIMER3 0x00001000 /* timer 3 */ -#define INTR_PIO_PC6 0x00000800 /* parallel i/o C bit 6 */ -#define INTR_PIO_PC7 0x00000400 /* parallel i/o C bit 7 */ -#define INTR_PIO_PC8 0x00000200 /* parallel i/o C bit 8 */ -#define INTR_TIMER4 0x00000080 /* timer 4 */ -#define INTR_PIO_PC9 0x00000040 /* parallel i/o C bit 9 */ -#define INTR_SCP 0x00000020 /* SCP */ -#define INTR_SMC1 0x00000010 /* SMC 1 */ -#define INTR_SMC2 0x00000008 /* SMC 2 */ -#define INTR_PIO_PC10 0x00000004 /* parallel i/o C bit 10 */ -#define INTR_PIO_PC11 0x00000002 /* parallel i/o C bit 11 */ -#define INTR_ERR 0x00000001 /* error */ - - -/***************************************************************** - CPM Interrupt vector encodings (MC68360UM p. 7-376) -*****************************************************************/ - -#define CPMVEC_NR 32 -#define CPMVEC_PIO_PC0 0x1f -#define CPMVEC_SCC1 0x1e -#define CPMVEC_SCC2 0x1d -#define CPMVEC_SCC3 0x1c -#define CPMVEC_SCC4 0x1b -#define CPMVEC_PIO_PC1 0x1a -#define CPMVEC_TIMER1 0x19 -#define CPMVEC_PIO_PC2 0x18 -#define CPMVEC_PIO_PC3 0x17 -#define CPMVEC_SDMA_CB_ERR 0x16 -#define CPMVEC_IDMA1 0x15 -#define CPMVEC_IDMA2 0x14 -#define CPMVEC_RESERVED3 0x13 -#define CPMVEC_TIMER2 0x12 -#define CPMVEC_RISCTIMER 0x11 -#define CPMVEC_RESERVED2 0x10 -#define CPMVEC_PIO_PC4 0x0f -#define CPMVEC_PIO_PC5 0x0e -#define CPMVEC_TIMER3 0x0c -#define CPMVEC_PIO_PC6 0x0b -#define CPMVEC_PIO_PC7 0x0a -#define CPMVEC_PIO_PC8 0x09 -#define CPMVEC_RESERVED1 0x08 -#define CPMVEC_TIMER4 0x07 -#define CPMVEC_PIO_PC9 0x06 -#define CPMVEC_SPI 0x05 -#define CPMVEC_SMC1 0x04 -#define CPMVEC_SMC2 0x03 -#define CPMVEC_PIO_PC10 0x02 -#define CPMVEC_PIO_PC11 0x01 -#define CPMVEC_ERROR 0x00 - -/* #define CPMVEC_PIO_PC0 ((ushort)0x1f) */ -/* #define CPMVEC_SCC1 ((ushort)0x1e) */ -/* #define CPMVEC_SCC2 ((ushort)0x1d) */ -/* #define CPMVEC_SCC3 ((ushort)0x1c) */ -/* #define CPMVEC_SCC4 ((ushort)0x1b) */ -/* #define CPMVEC_PIO_PC1 ((ushort)0x1a) */ -/* #define CPMVEC_TIMER1 ((ushort)0x19) */ -/* #define CPMVEC_PIO_PC2 ((ushort)0x18) */ -/* #define CPMVEC_PIO_PC3 ((ushort)0x17) */ -/* #define CPMVEC_SDMA_CB_ERR ((ushort)0x16) */ -/* #define CPMVEC_IDMA1 ((ushort)0x15) */ -/* #define CPMVEC_IDMA2 ((ushort)0x14) */ -/* #define CPMVEC_RESERVED3 ((ushort)0x13) */ -/* #define CPMVEC_TIMER2 ((ushort)0x12) */ -/* #define CPMVEC_RISCTIMER ((ushort)0x11) */ -/* #define CPMVEC_RESERVED2 ((ushort)0x10) */ -/* #define CPMVEC_PIO_PC4 ((ushort)0x0f) */ -/* #define CPMVEC_PIO_PC5 ((ushort)0x0e) */ -/* #define CPMVEC_TIMER3 ((ushort)0x0c) */ -/* #define CPMVEC_PIO_PC6 ((ushort)0x0b) */ -/* #define CPMVEC_PIO_PC7 ((ushort)0x0a) */ -/* #define CPMVEC_PIO_PC8 ((ushort)0x09) */ -/* #define CPMVEC_RESERVED1 ((ushort)0x08) */ -/* #define CPMVEC_TIMER4 ((ushort)0x07) */ -/* #define CPMVEC_PIO_PC9 ((ushort)0x06) */ -/* #define CPMVEC_SPI ((ushort)0x05) */ -/* #define CPMVEC_SMC1 ((ushort)0x04) */ -/* #define CPMVEC_SMC2 ((ushort)0x03) */ -/* #define CPMVEC_PIO_PC10 ((ushort)0x02) */ -/* #define CPMVEC_PIO_PC11 ((ushort)0x01) */ -/* #define CPMVEC_ERROR ((ushort)0x00) */ - - -/***************************************************************** - * PIO control registers - *****************************************************************/ - -/* Port A - See 360UM p. 7-358 - * - * Note that most of these pins have alternate functions - */ - - -/* The macros are nice, but there are all sorts of references to 1-indexed - * facilities on the 68360... */ -/* #define PA_RXD(n) ((ushort)(0x01<<(2*n))) */ -/* #define PA_TXD(n) ((ushort)(0x02<<(2*n))) */ - -#define PA_RXD1 ((ushort)0x0001) -#define PA_TXD1 ((ushort)0x0002) -#define PA_RXD2 ((ushort)0x0004) -#define PA_TXD2 ((ushort)0x0008) -#define PA_RXD3 ((ushort)0x0010) -#define PA_TXD3 ((ushort)0x0020) -#define PA_RXD4 ((ushort)0x0040) -#define PA_TXD4 ((ushort)0x0080) - -#define PA_CLK1 ((ushort)0x0100) -#define PA_CLK2 ((ushort)0x0200) -#define PA_CLK3 ((ushort)0x0400) -#define PA_CLK4 ((ushort)0x0800) -#define PA_CLK5 ((ushort)0x1000) -#define PA_CLK6 ((ushort)0x2000) -#define PA_CLK7 ((ushort)0x4000) -#define PA_CLK8 ((ushort)0x8000) - - -/* Port B - See 360UM p. 7-362 - */ - - -/* Port C - See 360UM p. 7-365 - */ - -#define PC_RTS1 ((ushort)0x0001) -#define PC_RTS2 ((ushort)0x0002) -#define PC__RTS3 ((ushort)0x0004) /* !RTS3 */ -#define PC__RTS4 ((ushort)0x0008) /* !RTS4 */ - -#define PC_CTS1 ((ushort)0x0010) -#define PC_CD1 ((ushort)0x0020) -#define PC_CTS2 ((ushort)0x0040) -#define PC_CD2 ((ushort)0x0080) -#define PC_CTS3 ((ushort)0x0100) -#define PC_CD3 ((ushort)0x0200) -#define PC_CTS4 ((ushort)0x0400) -#define PC_CD4 ((ushort)0x0800) - - - -/***************************************************************** - chip select option register -*****************************************************************/ -#define DTACK 0xe000 -#define ADR_MASK 0x1ffc -#define RDWR_MASK 0x0002 -#define FC_MASK 0x0001 - -/***************************************************************** - tbase and rbase registers -*****************************************************************/ -#define TBD_ADDR(quicc,pram) ((struct quicc_bd *) \ - (quicc->ch_or_u.u.udata_bd_ucode + pram->tbase)) -#define RBD_ADDR(quicc,pram) ((struct quicc_bd *) \ - (quicc->ch_or_u.u.udata_bd_ucode + pram->rbase)) -#define TBD_CUR_ADDR(quicc,pram) ((struct quicc_bd *) \ - (quicc->ch_or_u.u.udata_bd_ucode + pram->tbptr)) -#define RBD_CUR_ADDR(quicc,pram) ((struct quicc_bd *) \ - (quicc->ch_or_u.u.udata_bd_ucode + pram->rbptr)) -#define TBD_SET_CUR_ADDR(bd,quicc,pram) pram->tbptr = \ - ((unsigned short)((char *)(bd) - (char *)(quicc->ch_or_u.u.udata_bd_ucode))) -#define RBD_SET_CUR_ADDR(bd,quicc,pram) pram->rbptr = \ - ((unsigned short)((char *)(bd) - (char *)(quicc->ch_or_u.u.udata_bd_ucode))) -#define INCREASE_TBD(bd,quicc,pram) { \ - if((bd)->status & T_W) \ - (bd) = TBD_ADDR(quicc,pram); \ - else \ - (bd)++; \ -} -#define DECREASE_TBD(bd,quicc,pram) { \ - if ((bd) == TBD_ADDR(quicc, pram)) \ - while (!((bd)->status & T_W)) \ - (bd)++; \ - else \ - (bd)--; \ -} -#define INCREASE_RBD(bd,quicc,pram) { \ - if((bd)->status & R_W) \ - (bd) = RBD_ADDR(quicc,pram); \ - else \ - (bd)++; \ -} -#define DECREASE_RBD(bd,quicc,pram) { \ - if ((bd) == RBD_ADDR(quicc, pram)) \ - while (!((bd)->status & T_W)) \ - (bd)++; \ - else \ - (bd)--; \ -} - -/***************************************************************** - Macros for Multi channel -*****************************************************************/ -#define QMC_BASE(quicc,page) (struct global_multi_pram *)(&quicc->pram[page]) -#define MCBASE(quicc,page) (unsigned long)(quicc->pram[page].m.mcbase) -#define CHANNEL_PRAM_BASE(quicc,channel) ((struct quicc32_pram *) \ - (&(quicc->ch_or_u.ch_pram_tbl[channel]))) -#define TBD_32_ADDR(quicc,page,channel) ((struct quicc_bd *) \ - (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->tbase))) -#define RBD_32_ADDR(quicc,page,channel) ((struct quicc_bd *) \ - (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->rbase))) -#define TBD_32_CUR_ADDR(quicc,page,channel) ((struct quicc_bd *) \ - (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->tbptr))) -#define RBD_32_CUR_ADDR(quicc,page,channel) ((struct quicc_bd *) \ - (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->rbptr))) -#define TBD_32_SET_CUR_ADDR(bd,quicc,page,channel) \ - CHANNEL_PRAM_BASE(quicc,channel)->tbptr = \ - ((unsigned short)((char *)(bd) - (char *)(MCBASE(quicc,page)))) -#define RBD_32_SET_CUR_ADDR(bd,quicc,page,channel) \ - CHANNEL_PRAM_BASE(quicc,channel)->rbptr = \ - ((unsigned short)((char *)(bd) - (char *)(MCBASE(quicc,page)))) - -#define INCREASE_TBD_32(bd,quicc,page,channel) { \ - if((bd)->status & T_W) \ - (bd) = TBD_32_ADDR(quicc,page,channel); \ - else \ - (bd)++; \ -} -#define DECREASE_TBD_32(bd,quicc,page,channel) { \ - if ((bd) == TBD_32_ADDR(quicc, page,channel)) \ - while (!((bd)->status & T_W)) \ - (bd)++; \ - else \ - (bd)--; \ -} -#define INCREASE_RBD_32(bd,quicc,page,channel) { \ - if((bd)->status & R_W) \ - (bd) = RBD_32_ADDR(quicc,page,channel); \ - else \ - (bd)++; \ -} -#define DECREASE_RBD_32(bd,quicc,page,channel) { \ - if ((bd) == RBD_32_ADDR(quicc, page,channel)) \ - while (!((bd)->status & T_W)) \ - (bd)++; \ - else \ - (bd)--; \ -} - -#endif diff --git a/arch/m68knommu/include/asm/machdep.h b/arch/m68knommu/include/asm/machdep.h deleted file mode 100644 index de9f47a51cc..00000000000 --- a/arch/m68knommu/include/asm/machdep.h +++ /dev/null @@ -1,26 +0,0 @@ -#ifndef _M68KNOMMU_MACHDEP_H -#define _M68KNOMMU_MACHDEP_H - -#include <linux/interrupt.h> - -/* Hardware clock functions */ -extern void hw_timer_init(void); -extern unsigned long hw_timer_offset(void); - -extern irqreturn_t arch_timer_interrupt(int irq, void *dummy); - -/* Machine dependent time handling */ -extern void (*mach_gettod)(int *year, int *mon, int *day, int *hour, - int *min, int *sec); -extern int (*mach_set_clock_mmss)(unsigned long); - -/* machine dependent power off functions */ -extern void (*mach_reset)( void ); -extern void (*mach_halt)( void ); -extern void (*mach_power_off)( void ); - -extern void config_BSP(char *command, int len); - -extern void do_IRQ(int irq, struct pt_regs *fp); - -#endif /* _M68KNOMMU_MACHDEP_H */ diff --git a/arch/m68knommu/include/asm/math-emu.h b/arch/m68knommu/include/asm/math-emu.h deleted file mode 100644 index 7e7090517b7..00000000000 --- a/arch/m68knommu/include/asm/math-emu.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/math-emu.h> diff --git a/arch/m68knommu/include/asm/mc146818rtc.h b/arch/m68knommu/include/asm/mc146818rtc.h deleted file mode 100644 index 907a0481a14..00000000000 --- a/arch/m68knommu/include/asm/mc146818rtc.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * Machine dependent access functions for RTC registers. - */ -#ifndef _M68KNOMMU_MC146818RTC_H -#define _M68KNOMMU_MC146818RTC_H - -/* empty include file to satisfy the include in genrtc.c/ide-geometry.c */ - -#endif /* _M68KNOMMU_MC146818RTC_H */ diff --git a/arch/m68knommu/include/asm/mcfcache.h b/arch/m68knommu/include/asm/mcfcache.h deleted file mode 100644 index c042634fada..00000000000 --- a/arch/m68knommu/include/asm/mcfcache.h +++ /dev/null @@ -1,150 +0,0 @@ -/****************************************************************************/ - -/* - * mcfcache.h -- ColdFire CPU cache support code - * - * (C) Copyright 2004, Greg Ungerer <gerg@snapgear.com> - */ - -/****************************************************************************/ -#ifndef __M68KNOMMU_MCFCACHE_H -#define __M68KNOMMU_MCFCACHE_H -/****************************************************************************/ - - -/* - * The different ColdFire families have different cache arrangments. - * Everything from a small instruction only cache, to configurable - * data and/or instruction cache, to unified instruction/data, to - * harvard style separate instruction and data caches. - */ - -#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || defined(CONFIG_M5272) -/* - * Simple version 2 core cache. These have instruction cache only, - * we just need to invalidate it and enable it. - */ -.macro CACHE_ENABLE - movel #0x01000000,%d0 /* invalidate cache cmd */ - movec %d0,%CACR /* do invalidate cache */ - movel #0x80000100,%d0 /* setup cache mask */ - movec %d0,%CACR /* enable cache */ -.endm -#endif /* CONFIG_M5206 || CONFIG_M5206e || CONFIG_M5272 */ - -#if defined(CONFIG_M523x) || defined(CONFIG_M527x) -/* - * New version 2 cores have a configurable split cache arrangement. - * For now I am just enabling instruction cache - but ultimately I - * think a split instruction/data cache would be better. - */ -.macro CACHE_ENABLE - movel #0x01400000,%d0 - movec %d0,%CACR /* invalidate cache */ - nop - movel #0x0000c000,%d0 /* set SDRAM cached only */ - movec %d0,%ACR0 - movel #0x00000000,%d0 /* no other regions cached */ - movec %d0,%ACR1 - movel #0x80400100,%d0 /* configure cache */ - movec %d0,%CACR /* enable cache */ - nop -.endm -#endif /* CONFIG_M523x || CONFIG_M527x */ - -#if defined(CONFIG_M528x) -.macro CACHE_ENABLE - nop - movel #0x01000000, %d0 - movec %d0, %CACR /* Invalidate cache */ - nop - movel #0x0000c020, %d0 /* Set SDRAM cached only */ - movec %d0, %ACR0 - movel #0x00000000, %d0 /* No other regions cached */ - movec %d0, %ACR1 - movel #0x80000200, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Enable cache */ - nop -.endm -#endif /* CONFIG_M528x */ - -#if defined(CONFIG_M5249) || defined(CONFIG_M5307) -/* - * The version 3 core cache. Oddly enough the version 2 core 5249 - * has the same SDRAM and cache setup as the version 3 cores. - * This is a single unified instruction/data cache. - */ -.macro CACHE_ENABLE - movel #0x01000000,%d0 /* invalidate whole cache */ - movec %d0,%CACR - nop -#if defined(DEBUGGER_COMPATIBLE_CACHE) || defined(CONFIG_SECUREEDGEMP3) - movel #0x0000c000,%d0 /* set SDRAM cached (write-thru) */ -#else - movel #0x0000c020,%d0 /* set SDRAM cached (copyback) */ -#endif - movec %d0,%ACR0 - movel #0x00000000,%d0 /* no other regions cached */ - movec %d0,%ACR1 - movel #0xa0000200,%d0 /* enable cache */ - movec %d0,%CACR - nop -.endm -#endif /* CONFIG_M5249 || CONFIG_M5307 */ - -#if defined(CONFIG_M532x) -.macro CACHE_ENABLE - movel #0x01000000,%d0 /* invalidate cache cmd */ - movec %d0,%CACR /* do invalidate cache */ - nop - movel #0x4001C000,%d0 /* set SDRAM cached (write-thru) */ - movec %d0,%ACR0 - movel #0x00000000,%d0 /* no other regions cached */ - movec %d0,%ACR1 - movel #0x80000200,%d0 /* setup cache mask */ - movec %d0,%CACR /* enable cache */ - nop -.endm -#endif /* CONFIG_M532x */ - -#if defined(CONFIG_M5407) -/* - * Version 4 cores have a true harvard style separate instruction - * and data cache. Invalidate and enable cache, also enable write - * buffers and branch accelerator. - */ -.macro CACHE_ENABLE - movel #0x01040100,%d0 /* invalidate whole cache */ - movec %d0,%CACR - nop - movel #0x000fc000,%d0 /* set SDRAM cached only */ - movec %d0, %ACR0 - movel #0x00000000,%d0 /* no other regions cached */ - movec %d0, %ACR1 - movel #0x000fc000,%d0 /* set SDRAM cached only */ - movec %d0, %ACR2 - movel #0x00000000,%d0 /* no other regions cached */ - movec %d0, %ACR3 - movel #0xb6088400,%d0 /* enable caches */ - movec %d0,%CACR - nop -.endm -#endif /* CONFIG_M5407 */ - -#if defined(CONFIG_M520x) -.macro CACHE_ENABLE - move.l #0x01000000,%d0 /* invalidate whole cache */ - movec %d0,%CACR - nop - move.l #0x0000c000,%d0 /* set SDRAM cached (write-thru) */ - movec %d0,%ACR0 - move.l #0x00000000,%d0 /* no other regions cached */ - movec %d0,%ACR1 - move.l #0x80400000,%d0 /* enable 8K instruction cache */ - movec %d0,%CACR - nop -.endm -#endif /* CONFIG_M520x */ - -/****************************************************************************/ -#endif /* __M68KNOMMU_MCFCACHE_H */ diff --git a/arch/m68knommu/include/asm/mcfdma.h b/arch/m68knommu/include/asm/mcfdma.h deleted file mode 100644 index 705c52c79cd..00000000000 --- a/arch/m68knommu/include/asm/mcfdma.h +++ /dev/null @@ -1,144 +0,0 @@ -/****************************************************************************/ - -/* - * mcfdma.h -- Coldfire internal DMA support defines. - * - * (C) Copyright 1999, Rob Scott (rscott@mtrob.ml.org) - */ - -/****************************************************************************/ -#ifndef mcfdma_h -#define mcfdma_h -/****************************************************************************/ - - -/* - * Get address specific defines for this Coldfire member. - */ -#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) -#define MCFDMA_BASE0 0x200 /* Base address of DMA 0 */ -#define MCFDMA_BASE1 0x240 /* Base address of DMA 1 */ -#elif defined(CONFIG_M5272) -#define MCFDMA_BASE0 0x0e0 /* Base address of DMA 0 */ -#elif defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) -/* These are relative to the IPSBAR, not MBAR */ -#define MCFDMA_BASE0 0x100 /* Base address of DMA 0 */ -#define MCFDMA_BASE1 0x140 /* Base address of DMA 1 */ -#define MCFDMA_BASE2 0x180 /* Base address of DMA 2 */ -#define MCFDMA_BASE3 0x1C0 /* Base address of DMA 3 */ -#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) -#define MCFDMA_BASE0 0x300 /* Base address of DMA 0 */ -#define MCFDMA_BASE1 0x340 /* Base address of DMA 1 */ -#define MCFDMA_BASE2 0x380 /* Base address of DMA 2 */ -#define MCFDMA_BASE3 0x3C0 /* Base address of DMA 3 */ -#endif - - -#if !defined(CONFIG_M5272) - -/* - * Define the DMA register set addresses. - * Note: these are longword registers, use unsigned long as data type - */ -#define MCFDMA_SAR 0x00 /* DMA source address (r/w) */ -#define MCFDMA_DAR 0x01 /* DMA destination adr (r/w) */ -/* these are word registers, use unsigned short data type */ -#define MCFDMA_DCR 0x04 /* DMA control reg (r/w) */ -#define MCFDMA_BCR 0x06 /* DMA byte count reg (r/w) */ -/* these are byte registers, use unsiged char data type */ -#define MCFDMA_DSR 0x10 /* DMA status reg (r/w) */ -#define MCFDMA_DIVR 0x14 /* DMA interrupt vec (r/w) */ - -/* - * Bit definitions for the DMA Control Register (DCR). - */ -#define MCFDMA_DCR_INT 0x8000 /* Enable completion irq */ -#define MCFDMA_DCR_EEXT 0x4000 /* Enable external DMA req */ -#define MCFDMA_DCR_CS 0x2000 /* Enable cycle steal */ -#define MCFDMA_DCR_AA 0x1000 /* Enable auto alignment */ -#define MCFDMA_DCR_BWC_MASK 0x0E00 /* Bandwidth ctl mask */ -#define MCFDMA_DCR_BWC_512 0x0200 /* Bandwidth: 512 Bytes */ -#define MCFDMA_DCR_BWC_1024 0x0400 /* Bandwidth: 1024 Bytes */ -#define MCFDMA_DCR_BWC_2048 0x0600 /* Bandwidth: 2048 Bytes */ -#define MCFDMA_DCR_BWC_4096 0x0800 /* Bandwidth: 4096 Bytes */ -#define MCFDMA_DCR_BWC_8192 0x0a00 /* Bandwidth: 8192 Bytes */ -#define MCFDMA_DCR_BWC_16384 0x0c00 /* Bandwidth: 16384 Bytes */ -#define MCFDMA_DCR_BWC_32768 0x0e00 /* Bandwidth: 32768 Bytes */ -#define MCFDMA_DCR_SAA 0x0100 /* Single Address Access */ -#define MCFDMA_DCR_S_RW 0x0080 /* SAA read/write value */ -#define MCFDMA_DCR_SINC 0x0040 /* Source addr inc enable */ -#define MCFDMA_DCR_SSIZE_MASK 0x0030 /* Src xfer size */ -#define MCFDMA_DCR_SSIZE_LONG 0x0000 /* Src xfer size, 00 = longw */ -#define MCFDMA_DCR_SSIZE_BYTE 0x0010 /* Src xfer size, 01 = byte */ -#define MCFDMA_DCR_SSIZE_WORD 0x0020 /* Src xfer size, 10 = word */ -#define MCFDMA_DCR_SSIZE_LINE 0x0030 /* Src xfer size, 11 = line */ -#define MCFDMA_DCR_DINC 0x0008 /* Dest addr inc enable */ -#define MCFDMA_DCR_DSIZE_MASK 0x0006 /* Dest xfer size */ -#define MCFDMA_DCR_DSIZE_LONG 0x0000 /* Dest xfer size, 00 = long */ -#define MCFDMA_DCR_DSIZE_BYTE 0x0002 /* Dest xfer size, 01 = byte */ -#define MCFDMA_DCR_DSIZE_WORD 0x0004 /* Dest xfer size, 10 = word */ -#define MCFDMA_DCR_DSIZE_LINE 0x0006 /* Dest xfer size, 11 = line */ -#define MCFDMA_DCR_START 0x0001 /* Start transfer */ - -/* - * Bit definitions for the DMA Status Register (DSR). - */ -#define MCFDMA_DSR_CE 0x40 /* Config error */ -#define MCFDMA_DSR_BES 0x20 /* Bus Error on source */ -#define MCFDMA_DSR_BED 0x10 /* Bus Error on dest */ -#define MCFDMA_DSR_REQ 0x04 /* Requests remaining */ -#define MCFDMA_DSR_BSY 0x02 /* Busy */ -#define MCFDMA_DSR_DONE 0x01 /* DMA transfer complete */ - -#else /* This is an MCF5272 */ - -#define MCFDMA_DMR 0x00 /* Mode Register (r/w) */ -#define MCFDMA_DIR 0x03 /* Interrupt trigger register (r/w) */ -#define MCFDMA_DSAR 0x03 /* Source Address register (r/w) */ -#define MCFDMA_DDAR 0x04 /* Destination Address register (r/w) */ -#define MCFDMA_DBCR 0x02 /* Byte Count Register (r/w) */ - -/* Bit definitions for the DMA Mode Register (DMR) */ -#define MCFDMA_DMR_RESET 0x80000000L /* Reset bit */ -#define MCFDMA_DMR_EN 0x40000000L /* DMA enable */ -#define MCFDMA_DMR_RQM 0x000C0000L /* Request Mode Mask */ -#define MCFDMA_DMR_RQM_DUAL 0x000C0000L /* Dual address mode, the only valid mode */ -#define MCFDMA_DMR_DSTM 0x00002000L /* Destination addressing mask */ -#define MCFDMA_DMR_DSTM_SA 0x00000000L /* Destination uses static addressing */ -#define MCFDMA_DMR_DSTM_IA 0x00002000L /* Destination uses incremental addressing */ -#define MCFDMA_DMR_DSTT_UD 0x00000400L /* Destination is user data */ -#define MCFDMA_DMR_DSTT_UC 0x00000800L /* Destination is user code */ -#define MCFDMA_DMR_DSTT_SD 0x00001400L /* Destination is supervisor data */ -#define MCFDMA_DMR_DSTT_SC 0x00001800L /* Destination is supervisor code */ -#define MCFDMA_DMR_DSTS_OFF 0x8 /* offset to the destination size bits */ -#define MCFDMA_DMR_DSTS_LONG 0x00000000L /* Long destination size */ -#define MCFDMA_DMR_DSTS_BYTE 0x00000100L /* Byte destination size */ -#define MCFDMA_DMR_DSTS_WORD 0x00000200L /* Word destination size */ -#define MCFDMA_DMR_DSTS_LINE 0x00000300L /* Line destination size */ -#define MCFDMA_DMR_SRCM 0x00000020L /* Source addressing mask */ -#define MCFDMA_DMR_SRCM_SA 0x00000000L /* Source uses static addressing */ -#define MCFDMA_DMR_SRCM_IA 0x00000020L /* Source uses incremental addressing */ -#define MCFDMA_DMR_SRCT_UD 0x00000004L /* Source is user data */ -#define MCFDMA_DMR_SRCT_UC 0x00000008L /* Source is user code */ -#define MCFDMA_DMR_SRCT_SD 0x00000014L /* Source is supervisor data */ -#define MCFDMA_DMR_SRCT_SC 0x00000018L /* Source is supervisor code */ -#define MCFDMA_DMR_SRCS_OFF 0x0 /* Offset to the source size bits */ -#define MCFDMA_DMR_SRCS_LONG 0x00000000L /* Long source size */ -#define MCFDMA_DMR_SRCS_BYTE 0x00000001L /* Byte source size */ -#define MCFDMA_DMR_SRCS_WORD 0x00000002L /* Word source size */ -#define MCFDMA_DMR_SRCS_LINE 0x00000003L /* Line source size */ - -/* Bit definitions for the DMA interrupt register (DIR) */ -#define MCFDMA_DIR_INVEN 0x1000 /* Invalid Combination interrupt enable */ -#define MCFDMA_DIR_ASCEN 0x0800 /* Address Sequence Complete (Completion) interrupt enable */ -#define MCFDMA_DIR_TEEN 0x0200 /* Transfer Error interrupt enable */ -#define MCFDMA_DIR_TCEN 0x0100 /* Transfer Complete (a bus transfer, that is) interrupt enable */ -#define MCFDMA_DIR_INV 0x0010 /* Invalid Combination */ -#define MCFDMA_DIR_ASC 0x0008 /* Address Sequence Complete (DMA Completion) */ -#define MCFDMA_DIR_TE 0x0002 /* Transfer Error */ -#define MCFDMA_DIR_TC 0x0001 /* Transfer Complete */ - -#endif /* !defined(CONFIG_M5272) */ - -/****************************************************************************/ -#endif /* mcfdma_h */ diff --git a/arch/m68knommu/include/asm/mcfmbus.h b/arch/m68knommu/include/asm/mcfmbus.h deleted file mode 100644 index 319899c47a2..00000000000 --- a/arch/m68knommu/include/asm/mcfmbus.h +++ /dev/null @@ -1,77 +0,0 @@ -/****************************************************************************/ - -/* - * mcfmbus.h -- Coldfire MBUS support defines. - * - * (C) Copyright 1999, Martin Floeer (mfloeer@axcent.de) - */ - -/****************************************************************************/ - - -#ifndef mcfmbus_h -#define mcfmbus_h - - -#define MCFMBUS_BASE 0x280 -#define MCFMBUS_IRQ_VECTOR 0x19 -#define MCFMBUS_IRQ 0x1 -#define MCFMBUS_CLK 0x3f -#define MCFMBUS_IRQ_LEVEL 0x07 /*IRQ Level 1*/ -#define MCFMBUS_ADDRESS 0x01 - - -/* -* Define the 5307 MBUS register set addresses -*/ - -#define MCFMBUS_MADR 0x00 -#define MCFMBUS_MFDR 0x04 -#define MCFMBUS_MBCR 0x08 -#define MCFMBUS_MBSR 0x0C -#define MCFMBUS_MBDR 0x10 - - -#define MCFMBUS_MADR_ADDR(a) (((a)&0x7F)<<0x01) /*Slave Address*/ - -#define MCFMBUS_MFDR_MBC(a) ((a)&0x3F) /*M-Bus Clock*/ - -/* -* Define bit flags in Control Register -*/ - -#define MCFMBUS_MBCR_MEN (0x80) /* M-Bus Enable */ -#define MCFMBUS_MBCR_MIEN (0x40) /* M-Bus Interrupt Enable */ -#define MCFMBUS_MBCR_MSTA (0x20) /* Master/Slave Mode Select Bit */ -#define MCFMBUS_MBCR_MTX (0x10) /* Transmit/Rcv Mode Select Bit */ -#define MCFMBUS_MBCR_TXAK (0x08) /* Transmit Acknowledge Enable */ -#define MCFMBUS_MBCR_RSTA (0x04) /* Repeat Start */ - -/* -* Define bit flags in Status Register -*/ - -#define MCFMBUS_MBSR_MCF (0x80) /* Data Transfer Complete */ -#define MCFMBUS_MBSR_MAAS (0x40) /* Addressed as a Slave */ -#define MCFMBUS_MBSR_MBB (0x20) /* Bus Busy */ -#define MCFMBUS_MBSR_MAL (0x10) /* Arbitration Lost */ -#define MCFMBUS_MBSR_SRW (0x04) /* Slave Transmit */ -#define MCFMBUS_MBSR_MIF (0x02) /* M-Bus Interrupt */ -#define MCFMBUS_MBSR_RXAK (0x01) /* No Acknowledge Received */ - -/* -* Define bit flags in DATA I/O Register -*/ - -#define MCFMBUS_MBDR_READ (0x01) /* 1=read 0=write MBUS */ - -#define MBUSIOCSCLOCK 1 -#define MBUSIOCGCLOCK 2 -#define MBUSIOCSADDR 3 -#define MBUSIOCGADDR 4 -#define MBUSIOCSSLADDR 5 -#define MBUSIOCGSLADDR 6 -#define MBUSIOCSSUBADDR 7 -#define MBUSIOCGSUBADDR 8 - -#endif diff --git a/arch/m68knommu/include/asm/mcfne.h b/arch/m68knommu/include/asm/mcfne.h deleted file mode 100644 index 431f63aadd0..00000000000 --- a/arch/m68knommu/include/asm/mcfne.h +++ /dev/null @@ -1,325 +0,0 @@ -/****************************************************************************/ - -/* - * mcfne.h -- NE2000 in ColdFire eval boards. - * - * (C) Copyright 1999-2000, Greg Ungerer (gerg@snapgear.com) - * (C) Copyright 2000, Lineo (www.lineo.com) - * (C) Copyright 2001, SnapGear (www.snapgear.com) - * - * 19990409 David W. Miller Converted from m5206ne.h for 5307 eval board - * - * Hacked support for m5206e Cadre III evaluation board - * Fred Stevens (fred.stevens@pemstar.com) 13 April 1999 - */ - -/****************************************************************************/ -#ifndef mcfne_h -#define mcfne_h -/****************************************************************************/ - - -/* - * Support for NE2000 clones devices in ColdFire based boards. - * Not all boards address these parts the same way, some use a - * direct addressing method, others use a side-band address space - * to access odd address registers, some require byte swapping - * others do not. - */ -#define BSWAP(w) (((w) << 8) | ((w) >> 8)) -#define RSWAP(w) (w) - - -/* - * Define the basic hardware resources of NE2000 boards. - */ - -#if defined(CONFIG_ARN5206) -#define NE2000_ADDR 0x40000300 -#define NE2000_ODDOFFSET 0x00010000 -#define NE2000_IRQ_VECTOR 0xf0 -#define NE2000_IRQ_PRIORITY 2 -#define NE2000_IRQ_LEVEL 4 -#define NE2000_BYTE volatile unsigned short -#endif - -#if defined(CONFIG_M5206eC3) -#define NE2000_ADDR 0x40000300 -#define NE2000_ODDOFFSET 0x00010000 -#define NE2000_IRQ_VECTOR 0x1c -#define NE2000_IRQ_PRIORITY 2 -#define NE2000_IRQ_LEVEL 4 -#define NE2000_BYTE volatile unsigned short -#endif - -#if defined(CONFIG_M5206e) && defined(CONFIG_NETtel) -#define NE2000_ADDR 0x30000300 -#define NE2000_IRQ_VECTOR 25 -#define NE2000_IRQ_PRIORITY 1 -#define NE2000_IRQ_LEVEL 3 -#define NE2000_BYTE volatile unsigned char -#endif - -#if defined(CONFIG_M5307C3) -#define NE2000_ADDR 0x40000300 -#define NE2000_ODDOFFSET 0x00010000 -#define NE2000_IRQ_VECTOR 0x1b -#define NE2000_BYTE volatile unsigned short -#endif - -#if defined(CONFIG_M5272) && defined(CONFIG_NETtel) -#define NE2000_ADDR 0x30600300 -#define NE2000_ODDOFFSET 0x00008000 -#define NE2000_IRQ_VECTOR 67 -#undef BSWAP -#define BSWAP(w) (w) -#define NE2000_BYTE volatile unsigned short -#undef RSWAP -#define RSWAP(w) (((w) << 8) | ((w) >> 8)) -#endif - -#if defined(CONFIG_M5307) && defined(CONFIG_NETtel) -#define NE2000_ADDR0 0x30600300 -#define NE2000_ADDR1 0x30800300 -#define NE2000_ODDOFFSET 0x00008000 -#define NE2000_IRQ_VECTOR0 27 -#define NE2000_IRQ_VECTOR1 29 -#undef BSWAP -#define BSWAP(w) (w) -#define NE2000_BYTE volatile unsigned short -#undef RSWAP -#define RSWAP(w) (((w) << 8) | ((w) >> 8)) -#endif - -#if defined(CONFIG_M5307) && defined(CONFIG_SECUREEDGEMP3) -#define NE2000_ADDR 0x30600300 -#define NE2000_ODDOFFSET 0x00008000 -#define NE2000_IRQ_VECTOR 27 -#undef BSWAP -#define BSWAP(w) (w) -#define NE2000_BYTE volatile unsigned short -#undef RSWAP -#define RSWAP(w) (((w) << 8) | ((w) >> 8)) -#endif - -#if defined(CONFIG_ARN5307) -#define NE2000_ADDR 0xfe600300 -#define NE2000_ODDOFFSET 0x00010000 -#define NE2000_IRQ_VECTOR 0x1b -#define NE2000_IRQ_PRIORITY 2 -#define NE2000_IRQ_LEVEL 3 -#define NE2000_BYTE volatile unsigned short -#endif - -#if defined(CONFIG_M5407C3) -#define NE2000_ADDR 0x40000300 -#define NE2000_ODDOFFSET 0x00010000 -#define NE2000_IRQ_VECTOR 0x1b -#define NE2000_BYTE volatile unsigned short -#endif - -/****************************************************************************/ - -/* - * Side-band address space for odd address requires re-mapping - * many of the standard ISA access functions. - */ -#ifdef NE2000_ODDOFFSET - -#undef outb -#undef outb_p -#undef inb -#undef inb_p -#undef outsb -#undef outsw -#undef insb -#undef insw - -#define outb ne2000_outb -#define inb ne2000_inb -#define outb_p ne2000_outb -#define inb_p ne2000_inb -#define outsb ne2000_outsb -#define outsw ne2000_outsw -#define insb ne2000_insb -#define insw ne2000_insw - - -#ifndef COLDFIRE_NE2000_FUNCS - -void ne2000_outb(unsigned int val, unsigned int addr); -int ne2000_inb(unsigned int addr); -void ne2000_insb(unsigned int addr, void *vbuf, int unsigned long len); -void ne2000_insw(unsigned int addr, void *vbuf, unsigned long len); -void ne2000_outsb(unsigned int addr, void *vbuf, unsigned long len); -void ne2000_outsw(unsigned int addr, void *vbuf, unsigned long len); - -#else - -/* - * This macro converts a conventional register address into the - * real memory pointer of the mapped NE2000 device. - * On most NE2000 implementations on ColdFire boards the chip is - * mapped in kinda funny, due to its ISA heritage. - */ -#define NE2000_PTR(addr) ((addr&0x1)?(NE2000_ODDOFFSET+addr-1):(addr)) -#define NE2000_DATA_PTR(addr) (addr) - - -void ne2000_outb(unsigned int val, unsigned int addr) -{ - NE2000_BYTE *rp; - - rp = (NE2000_BYTE *) NE2000_PTR(addr); - *rp = RSWAP(val); -} - -int ne2000_inb(unsigned int addr) -{ - NE2000_BYTE *rp, val; - - rp = (NE2000_BYTE *) NE2000_PTR(addr); - val = *rp; - return((int) ((NE2000_BYTE) RSWAP(val))); -} - -void ne2000_insb(unsigned int addr, void *vbuf, int unsigned long len) -{ - NE2000_BYTE *rp, val; - unsigned char *buf; - - buf = (unsigned char *) vbuf; - rp = (NE2000_BYTE *) NE2000_DATA_PTR(addr); - for (; (len > 0); len--) { - val = *rp; - *buf++ = RSWAP(val); - } -} - -void ne2000_insw(unsigned int addr, void *vbuf, unsigned long len) -{ - volatile unsigned short *rp; - unsigned short w, *buf; - - buf = (unsigned short *) vbuf; - rp = (volatile unsigned short *) NE2000_DATA_PTR(addr); - for (; (len > 0); len--) { - w = *rp; - *buf++ = BSWAP(w); - } -} - -void ne2000_outsb(unsigned int addr, const void *vbuf, unsigned long len) -{ - NE2000_BYTE *rp, val; - unsigned char *buf; - - buf = (unsigned char *) vbuf; - rp = (NE2000_BYTE *) NE2000_DATA_PTR(addr); - for (; (len > 0); len--) { - val = *buf++; - *rp = RSWAP(val); - } -} - -void ne2000_outsw(unsigned int addr, const void *vbuf, unsigned long len) -{ - volatile unsigned short *rp; - unsigned short w, *buf; - - buf = (unsigned short *) vbuf; - rp = (volatile unsigned short *) NE2000_DATA_PTR(addr); - for (; (len > 0); len--) { - w = *buf++; - *rp = BSWAP(w); - } -} - -#endif /* COLDFIRE_NE2000_FUNCS */ -#endif /* NE2000_OFFOFFSET */ - -/****************************************************************************/ - -#ifdef COLDFIRE_NE2000_FUNCS - -/* - * Lastly the interrupt set up code... - * Minor differences between the different board types. - */ - -#if defined(CONFIG_ARN5206) -void ne2000_irqsetup(int irq) -{ - volatile unsigned char *icrp; - - icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_ICR4); - *icrp = MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI2; - mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT4); -} -#endif - -#if defined(CONFIG_M5206eC3) -void ne2000_irqsetup(int irq) -{ - volatile unsigned char *icrp; - - icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_ICR4); - *icrp = MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI2 | MCFSIM_ICR_AUTOVEC; - mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT4); -} -#endif - -#if defined(CONFIG_M5206e) && defined(CONFIG_NETtel) -void ne2000_irqsetup(int irq) -{ - mcf_autovector(irq); -} -#endif - -#if defined(CONFIG_M5272) && defined(CONFIG_NETtel) -void ne2000_irqsetup(int irq) -{ - volatile unsigned long *icrp; - volatile unsigned long *pitr; - - /* The NE2000 device uses external IRQ3 */ - icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1); - *icrp = (*icrp & 0x77077777) | 0x00d00000; - - pitr = (volatile unsigned long *) (MCF_MBAR + MCFSIM_PITR); - *pitr = *pitr | 0x20000000; -} - -void ne2000_irqack(int irq) -{ - volatile unsigned long *icrp; - - /* The NE2000 device uses external IRQ3 */ - icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1); - *icrp = (*icrp & 0x77777777) | 0x00800000; -} -#endif - -#if defined(CONFIG_M5307) || defined(CONFIG_M5407) -#if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3) - -void ne2000_irqsetup(int irq) -{ - mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT3); - mcf_autovector(irq); -} - -#else - -void ne2000_irqsetup(int irq) -{ - mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT3); -} - -#endif /* ! CONFIG_NETtel || CONFIG_SECUREEDGEMP3 */ -#endif /* CONFIG_M5307 || CONFIG_M5407 */ - -#endif /* COLDFIRE_NE2000_FUNCS */ - -/****************************************************************************/ -#endif /* mcfne_h */ diff --git a/arch/m68knommu/include/asm/mcfpci.h b/arch/m68knommu/include/asm/mcfpci.h deleted file mode 100644 index f1507dd06ec..00000000000 --- a/arch/m68knommu/include/asm/mcfpci.h +++ /dev/null @@ -1,119 +0,0 @@ -/****************************************************************************/ - -/* - * mcfpci.h -- PCI bridge on ColdFire eval boards. - * - * (C) Copyright 2000, Greg Ungerer (gerg@snapgear.com) - * (C) Copyright 2000, Lineo Inc. (www.lineo.com) - */ - -/****************************************************************************/ -#ifndef mcfpci_h -#define mcfpci_h -/****************************************************************************/ - - -#ifdef CONFIG_PCI - -/* - * Address regions in the PCI address space are not mapped into the - * normal memory space of the ColdFire. They must be accessed via - * handler routines. This is easy for I/O space (inb/outb/etc) but - * needs some code changes to support ordinary memory. Interrupts - * also need to be vectored through the PCI handler first, then it - * will call the actual driver sub-handlers. - */ - -/* - * Un-define all the standard I/O access routines. - */ -#undef inb -#undef inw -#undef inl -#undef inb_p -#undef inw_p -#undef insb -#undef insw -#undef insl -#undef outb -#undef outw -#undef outl -#undef outb_p -#undef outw_p -#undef outsb -#undef outsw -#undef outsl - -#undef request_irq -#undef free_irq - -#undef bus_to_virt -#undef virt_to_bus - - -/* - * Re-direct all I/O memory accesses functions to PCI specific ones. - */ -#define inb pci_inb -#define inw pci_inw -#define inl pci_inl -#define inb_p pci_inb -#define inw_p pci_inw -#define insb pci_insb -#define insw pci_insw -#define insl pci_insl - -#define outb pci_outb -#define outw pci_outw -#define outl pci_outl -#define outb_p pci_outb -#define outw_p pci_outw -#define outsb pci_outsb -#define outsw pci_outsw -#define outsl pci_outsl - -#define request_irq pci_request_irq -#define free_irq pci_free_irq - -#define virt_to_bus pci_virt_to_bus -#define bus_to_virt pci_bus_to_virt - -#define CONFIG_COMEMPCI 1 - - -/* - * Prototypes of the real PCI functions (defined in bios32.c). - */ -unsigned char pci_inb(unsigned int addr); -unsigned short pci_inw(unsigned int addr); -unsigned int pci_inl(unsigned int addr); -void pci_insb(void *addr, void *buf, int len); -void pci_insw(void *addr, void *buf, int len); -void pci_insl(void *addr, void *buf, int len); - -void pci_outb(unsigned char val, unsigned int addr); -void pci_outw(unsigned short val, unsigned int addr); -void pci_outl(unsigned int val, unsigned int addr); -void pci_outsb(void *addr, void *buf, int len); -void pci_outsw(void *addr, void *buf, int len); -void pci_outsl(void *addr, void *buf, int len); - -int pci_request_irq(unsigned int irq, - void (*handler)(int, void *, struct pt_regs *), - unsigned long flags, - const char *device, - void *dev_id); -void pci_free_irq(unsigned int irq, void *dev_id); - -void *pci_bmalloc(int size); -void pci_bmfree(void *bmp, int len); -void pci_copytoshmem(unsigned long bmp, void *src, int size); -void pci_copyfromshmem(void *dst, unsigned long bmp, int size); -unsigned long pci_virt_to_bus(volatile void *address); -void *pci_bus_to_virt(unsigned long address); -void pci_bmcpyto(void *dst, void *src, int len); -void pci_bmcpyfrom(void *dst, void *src, int len); - -#endif /* CONFIG_PCI */ -/****************************************************************************/ -#endif /* mcfpci_h */ diff --git a/arch/m68knommu/include/asm/mcfpit.h b/arch/m68knommu/include/asm/mcfpit.h deleted file mode 100644 index f570cf64fd2..00000000000 --- a/arch/m68knommu/include/asm/mcfpit.h +++ /dev/null @@ -1,64 +0,0 @@ -/****************************************************************************/ - -/* - * mcfpit.h -- ColdFire internal PIT timer support defines. - * - * (C) Copyright 2003, Greg Ungerer (gerg@snapgear.com) - */ - -/****************************************************************************/ -#ifndef mcfpit_h -#define mcfpit_h -/****************************************************************************/ - - -/* - * Get address specific defines for the 5270/5271, 5280/5282, and 5208. - */ -#if defined(CONFIG_M520x) -#define MCFPIT_BASE1 0x00080000 /* Base address of TIMER1 */ -#define MCFPIT_BASE2 0x00084000 /* Base address of TIMER2 */ -#else -#define MCFPIT_BASE1 0x00150000 /* Base address of TIMER1 */ -#define MCFPIT_BASE2 0x00160000 /* Base address of TIMER2 */ -#define MCFPIT_BASE3 0x00170000 /* Base address of TIMER3 */ -#define MCFPIT_BASE4 0x00180000 /* Base address of TIMER4 */ -#endif - -/* - * Define the PIT timer register set addresses. - */ -#define MCFPIT_PCSR 0x0 /* PIT control register */ -#define MCFPIT_PMR 0x2 /* PIT modulus register */ -#define MCFPIT_PCNTR 0x4 /* PIT count register */ - -/* - * Bit definitions for the PIT Control and Status register. - */ -#define MCFPIT_PCSR_CLK1 0x0000 /* System clock divisor */ -#define MCFPIT_PCSR_CLK2 0x0100 /* System clock divisor */ -#define MCFPIT_PCSR_CLK4 0x0200 /* System clock divisor */ -#define MCFPIT_PCSR_CLK8 0x0300 /* System clock divisor */ -#define MCFPIT_PCSR_CLK16 0x0400 /* System clock divisor */ -#define MCFPIT_PCSR_CLK32 0x0500 /* System clock divisor */ -#define MCFPIT_PCSR_CLK64 0x0600 /* System clock divisor */ -#define MCFPIT_PCSR_CLK128 0x0700 /* System clock divisor */ -#define MCFPIT_PCSR_CLK256 0x0800 /* System clock divisor */ -#define MCFPIT_PCSR_CLK512 0x0900 /* System clock divisor */ -#define MCFPIT_PCSR_CLK1024 0x0a00 /* System clock divisor */ -#define MCFPIT_PCSR_CLK2048 0x0b00 /* System clock divisor */ -#define MCFPIT_PCSR_CLK4096 0x0c00 /* System clock divisor */ -#define MCFPIT_PCSR_CLK8192 0x0d00 /* System clock divisor */ -#define MCFPIT_PCSR_CLK16384 0x0e00 /* System clock divisor */ -#define MCFPIT_PCSR_CLK32768 0x0f00 /* System clock divisor */ -#define MCFPIT_PCSR_DOZE 0x0040 /* Clock run in doze mode */ -#define MCFPIT_PCSR_HALTED 0x0020 /* Clock run in halt mode */ -#define MCFPIT_PCSR_OVW 0x0010 /* Overwrite PIT counter now */ -#define MCFPIT_PCSR_PIE 0x0008 /* Enable PIT interrupt */ -#define MCFPIT_PCSR_PIF 0x0004 /* PIT interrupt flag */ -#define MCFPIT_PCSR_RLD 0x0002 /* Reload counter */ -#define MCFPIT_PCSR_EN 0x0001 /* Enable PIT */ -#define MCFPIT_PCSR_DISABLE 0x0000 /* Disable PIT */ - -/****************************************************************************/ -#endif /* mcfpit_h */ diff --git a/arch/m68knommu/include/asm/mcfsim.h b/arch/m68knommu/include/asm/mcfsim.h deleted file mode 100644 index da3f2ceff3a..00000000000 --- a/arch/m68knommu/include/asm/mcfsim.h +++ /dev/null @@ -1,126 +0,0 @@ -/****************************************************************************/ - -/* - * mcfsim.h -- ColdFire System Integration Module support. - * - * (C) Copyright 1999-2003, Greg Ungerer (gerg@snapgear.com) - * (C) Copyright 2000, Lineo Inc. (www.lineo.com) - */ - -/****************************************************************************/ -#ifndef mcfsim_h -#define mcfsim_h -/****************************************************************************/ - - -/* - * Include 5204, 5206/e, 5235, 5249, 5270/5271, 5272, 5280/5282, - * 5307 or 5407 specific addresses. - */ -#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) -#include <asm/m5206sim.h> -#elif defined(CONFIG_M520x) -#include <asm/m520xsim.h> -#elif defined(CONFIG_M523x) -#include <asm/m523xsim.h> -#elif defined(CONFIG_M5249) -#include <asm/m5249sim.h> -#elif defined(CONFIG_M527x) -#include <asm/m527xsim.h> -#elif defined(CONFIG_M5272) -#include <asm/m5272sim.h> -#elif defined(CONFIG_M528x) -#include <asm/m528xsim.h> -#elif defined(CONFIG_M5307) -#include <asm/m5307sim.h> -#elif defined(CONFIG_M532x) -#include <asm/m532xsim.h> -#elif defined(CONFIG_M5407) -#include <asm/m5407sim.h> -#endif - - -/* - * Define the base address of the SIM within the MBAR address space. - */ -#define MCFSIM_BASE 0x0 /* Base address of SIM */ - - -/* - * Bit definitions for the ICR family of registers. - */ -#define MCFSIM_ICR_AUTOVEC 0x80 /* Auto-vectored intr */ -#define MCFSIM_ICR_LEVEL0 0x00 /* Level 0 intr */ -#define MCFSIM_ICR_LEVEL1 0x04 /* Level 1 intr */ -#define MCFSIM_ICR_LEVEL2 0x08 /* Level 2 intr */ -#define MCFSIM_ICR_LEVEL3 0x0c /* Level 3 intr */ -#define MCFSIM_ICR_LEVEL4 0x10 /* Level 4 intr */ -#define MCFSIM_ICR_LEVEL5 0x14 /* Level 5 intr */ -#define MCFSIM_ICR_LEVEL6 0x18 /* Level 6 intr */ -#define MCFSIM_ICR_LEVEL7 0x1c /* Level 7 intr */ - -#define MCFSIM_ICR_PRI0 0x00 /* Priority 0 intr */ -#define MCFSIM_ICR_PRI1 0x01 /* Priority 1 intr */ -#define MCFSIM_ICR_PRI2 0x02 /* Priority 2 intr */ -#define MCFSIM_ICR_PRI3 0x03 /* Priority 3 intr */ - -/* - * Bit definitions for the Interrupt Mask register (IMR). - */ -#define MCFSIM_IMR_EINT1 0x0002 /* External intr # 1 */ -#define MCFSIM_IMR_EINT2 0x0004 /* External intr # 2 */ -#define MCFSIM_IMR_EINT3 0x0008 /* External intr # 3 */ -#define MCFSIM_IMR_EINT4 0x0010 /* External intr # 4 */ -#define MCFSIM_IMR_EINT5 0x0020 /* External intr # 5 */ -#define MCFSIM_IMR_EINT6 0x0040 /* External intr # 6 */ -#define MCFSIM_IMR_EINT7 0x0080 /* External intr # 7 */ - -#define MCFSIM_IMR_SWD 0x0100 /* Software Watchdog intr */ -#define MCFSIM_IMR_TIMER1 0x0200 /* TIMER 1 intr */ -#define MCFSIM_IMR_TIMER2 0x0400 /* TIMER 2 intr */ -#define MCFSIM_IMR_MBUS 0x0800 /* MBUS intr */ -#define MCFSIM_IMR_UART1 0x1000 /* UART 1 intr */ -#define MCFSIM_IMR_UART2 0x2000 /* UART 2 intr */ - -#if defined(CONFIG_M5206e) -#define MCFSIM_IMR_DMA1 0x4000 /* DMA 1 intr */ -#define MCFSIM_IMR_DMA2 0x8000 /* DMA 2 intr */ -#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) -#define MCFSIM_IMR_DMA0 0x4000 /* DMA 0 intr */ -#define MCFSIM_IMR_DMA1 0x8000 /* DMA 1 intr */ -#define MCFSIM_IMR_DMA2 0x10000 /* DMA 2 intr */ -#define MCFSIM_IMR_DMA3 0x20000 /* DMA 3 intr */ -#endif - -/* - * Mask for all of the SIM devices. Some parts have more or less - * SIM devices. This is a catchall for the sandard set. - */ -#ifndef MCFSIM_IMR_MASKALL -#define MCFSIM_IMR_MASKALL 0x3ffe /* All intr sources */ -#endif - - -/* - * PIT interrupt settings, if not found in mXXXXsim.h file. - */ -#ifndef ICR_INTRCONF -#define ICR_INTRCONF 0x2b /* PIT1 level 5, priority 3 */ -#endif -#ifndef MCFPIT_IMR -#define MCFPIT_IMR MCFINTC_IMRH -#endif -#ifndef MCFPIT_IMR_IBIT -#define MCFPIT_IMR_IBIT (1 << (MCFINT_PIT1 - 32)) -#endif - - -#ifndef __ASSEMBLY__ -/* - * Definition for the interrupt auto-vectoring support. - */ -extern void mcf_autovector(unsigned int vec); -#endif /* __ASSEMBLY__ */ - -/****************************************************************************/ -#endif /* mcfsim_h */ diff --git a/arch/m68knommu/include/asm/mcfsmc.h b/arch/m68knommu/include/asm/mcfsmc.h deleted file mode 100644 index 2d7a4dbd968..00000000000 --- a/arch/m68knommu/include/asm/mcfsmc.h +++ /dev/null @@ -1,187 +0,0 @@ -/****************************************************************************/ - -/* - * mcfsmc.h -- SMC ethernet support for ColdFire environments. - * - * (C) Copyright 1999-2002, Greg Ungerer (gerg@snapgear.com) - * (C) Copyright 2000, Lineo Inc. (www.lineo.com) - */ - -/****************************************************************************/ -#ifndef mcfsmc_h -#define mcfsmc_h -/****************************************************************************/ - -/* - * None of the current ColdFire targets that use the SMC91x111 - * allow 8 bit accesses. So this code is 16bit access only. - */ - - -#undef outb -#undef inb -#undef outw -#undef outwd -#undef inw -#undef outl -#undef inl - -#undef outsb -#undef outsw -#undef outsl -#undef insb -#undef insw -#undef insl - -/* - * Re-defines for ColdFire environment... The SMC part is - * mapped into memory space, so remap the PC-style in/out - * routines to handle that. - */ -#define outb smc_outb -#define inb smc_inb -#define outw smc_outw -#define outwd smc_outwd -#define inw smc_inw -#define outl smc_outl -#define inl smc_inl - -#define outsb smc_outsb -#define outsw smc_outsw -#define outsl smc_outsl -#define insb smc_insb -#define insw smc_insw -#define insl smc_insl - - -static inline int smc_inb(unsigned int addr) -{ - register unsigned short w; - w = *((volatile unsigned short *) (addr & ~0x1)); - return(((addr & 0x1) ? w : (w >> 8)) & 0xff); -} - -static inline void smc_outw(unsigned int val, unsigned int addr) -{ - *((volatile unsigned short *) addr) = (val << 8) | (val >> 8); -} - -static inline int smc_inw(unsigned int addr) -{ - register unsigned short w; - w = *((volatile unsigned short *) addr); - return(((w << 8) | (w >> 8)) & 0xffff); -} - -static inline void smc_outl(unsigned long val, unsigned int addr) -{ - *((volatile unsigned long *) addr) = - ((val << 8) & 0xff000000) | ((val >> 8) & 0x00ff0000) | - ((val << 8) & 0x0000ff00) | ((val >> 8) & 0x000000ff); -} - -static inline void smc_outwd(unsigned int val, unsigned int addr) -{ - *((volatile unsigned short *) addr) = val; -} - - -/* - * The rep* functions are used to feed the data port with - * raw data. So we do not byte swap them when copying. - */ - -static inline void smc_insb(unsigned int addr, void *vbuf, int unsigned long len) -{ - volatile unsigned short *rp; - unsigned short *buf, *ebuf; - - buf = (unsigned short *) vbuf; - rp = (volatile unsigned short *) addr; - - /* Copy as words for as long as possible */ - for (ebuf = buf + (len >> 1); (buf < ebuf); ) - *buf++ = *rp; - - /* Lastly, handle left over byte */ - if (len & 0x1) - *((unsigned char *) buf) = (*rp >> 8) & 0xff; -} - -static inline void smc_insw(unsigned int addr, void *vbuf, unsigned long len) -{ - volatile unsigned short *rp; - unsigned short *buf, *ebuf; - - buf = (unsigned short *) vbuf; - rp = (volatile unsigned short *) addr; - for (ebuf = buf + len; (buf < ebuf); ) - *buf++ = *rp; -} - -static inline void smc_insl(unsigned int addr, void *vbuf, unsigned long len) -{ - volatile unsigned long *rp; - unsigned long *buf, *ebuf; - - buf = (unsigned long *) vbuf; - rp = (volatile unsigned long *) addr; - for (ebuf = buf + len; (buf < ebuf); ) - *buf++ = *rp; -} - -static inline void smc_outsw(unsigned int addr, const void *vbuf, unsigned long len) -{ - volatile unsigned short *rp; - unsigned short *buf, *ebuf; - - buf = (unsigned short *) vbuf; - rp = (volatile unsigned short *) addr; - for (ebuf = buf + len; (buf < ebuf); ) - *rp = *buf++; -} - -static inline void smc_outsl(unsigned int addr, void *vbuf, unsigned long len) -{ - volatile unsigned long *rp; - unsigned long *buf, *ebuf; - - buf = (unsigned long *) vbuf; - rp = (volatile unsigned long *) addr; - for (ebuf = buf + len; (buf < ebuf); ) - *rp = *buf++; -} - - -#ifdef CONFIG_NETtel -/* - * Re-map the address space of at least one of the SMC ethernet - * parts. Both parts power up decoding the same address, so we - * need to move one of them first, before doing enything else. - * - * We also increase the number of wait states for this part by one. - */ - -void smc_remap(unsigned int ioaddr) -{ - static int once = 0; - extern unsigned short ppdata; - if (once++ == 0) { - *((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADDR)) = 0x00ec; - ppdata |= 0x0080; - *((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADAT)) = ppdata; - outw(0x0001, ioaddr + BANK_SELECT); - outw(0x0001, ioaddr + BANK_SELECT); - outw(0x0067, ioaddr + BASE); - - ppdata &= ~0x0080; - *((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADAT)) = ppdata; - } - - *((volatile unsigned short *)(MCF_MBAR+MCFSIM_CSCR3)) = 0x1180; -} - -#endif - -/****************************************************************************/ -#endif /* mcfsmc_h */ diff --git a/arch/m68knommu/include/asm/mcftimer.h b/arch/m68knommu/include/asm/mcftimer.h deleted file mode 100644 index 0f90f6d2227..00000000000 --- a/arch/m68knommu/include/asm/mcftimer.h +++ /dev/null @@ -1,80 +0,0 @@ -/****************************************************************************/ - -/* - * mcftimer.h -- ColdFire internal TIMER support defines. - * - * (C) Copyright 1999-2006, Greg Ungerer <gerg@snapgear.com> - * (C) Copyright 2000, Lineo Inc. (www.lineo.com) - */ - -/****************************************************************************/ -#ifndef mcftimer_h -#define mcftimer_h -/****************************************************************************/ - - -/* - * Get address specific defines for this ColdFire member. - */ -#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) -#define MCFTIMER_BASE1 0x100 /* Base address of TIMER1 */ -#define MCFTIMER_BASE2 0x120 /* Base address of TIMER2 */ -#elif defined(CONFIG_M5272) -#define MCFTIMER_BASE1 0x200 /* Base address of TIMER1 */ -#define MCFTIMER_BASE2 0x220 /* Base address of TIMER2 */ -#define MCFTIMER_BASE3 0x240 /* Base address of TIMER4 */ -#define MCFTIMER_BASE4 0x260 /* Base address of TIMER3 */ -#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) -#define MCFTIMER_BASE1 0x140 /* Base address of TIMER1 */ -#define MCFTIMER_BASE2 0x180 /* Base address of TIMER2 */ -#elif defined(CONFIG_M532x) -#define MCFTIMER_BASE1 0xfc070000 /* Base address of TIMER1 */ -#define MCFTIMER_BASE2 0xfc074000 /* Base address of TIMER2 */ -#define MCFTIMER_BASE3 0xfc078000 /* Base address of TIMER3 */ -#define MCFTIMER_BASE4 0xfc07c000 /* Base address of TIMER4 */ -#endif - - -/* - * Define the TIMER register set addresses. - */ -#define MCFTIMER_TMR 0x00 /* Timer Mode reg (r/w) */ -#define MCFTIMER_TRR 0x04 /* Timer Reference (r/w) */ -#define MCFTIMER_TCR 0x08 /* Timer Capture reg (r/w) */ -#define MCFTIMER_TCN 0x0C /* Timer Counter reg (r/w) */ -#if defined(CONFIG_M532x) -#define MCFTIMER_TER 0x03 /* Timer Event reg (r/w) */ -#else -#define MCFTIMER_TER 0x11 /* Timer Event reg (r/w) */ -#endif - -/* - * Bit definitions for the Timer Mode Register (TMR). - * Register bit flags are common accross ColdFires. - */ -#define MCFTIMER_TMR_PREMASK 0xff00 /* Prescalar mask */ -#define MCFTIMER_TMR_DISCE 0x0000 /* Disable capture */ -#define MCFTIMER_TMR_ANYCE 0x00c0 /* Capture any edge */ -#define MCFTIMER_TMR_FALLCE 0x0080 /* Capture fallingedge */ -#define MCFTIMER_TMR_RISECE 0x0040 /* Capture rising edge */ -#define MCFTIMER_TMR_ENOM 0x0020 /* Enable output toggle */ -#define MCFTIMER_TMR_DISOM 0x0000 /* Do single output pulse */ -#define MCFTIMER_TMR_ENORI 0x0010 /* Enable ref interrupt */ -#define MCFTIMER_TMR_DISORI 0x0000 /* Disable ref interrupt */ -#define MCFTIMER_TMR_RESTART 0x0008 /* Restart counter */ -#define MCFTIMER_TMR_FREERUN 0x0000 /* Free running counter */ -#define MCFTIMER_TMR_CLKTIN 0x0006 /* Input clock is TIN */ -#define MCFTIMER_TMR_CLK16 0x0004 /* Input clock is /16 */ -#define MCFTIMER_TMR_CLK1 0x0002 /* Input clock is /1 */ -#define MCFTIMER_TMR_CLKSTOP 0x0000 /* Stop counter */ -#define MCFTIMER_TMR_ENABLE 0x0001 /* Enable timer */ -#define MCFTIMER_TMR_DISABLE 0x0000 /* Disable timer */ - -/* - * Bit definitions for the Timer Event Registers (TER). - */ -#define MCFTIMER_TER_CAP 0x01 /* Capture event */ -#define MCFTIMER_TER_REF 0x02 /* Refernece event */ - -/****************************************************************************/ -#endif /* mcftimer_h */ diff --git a/arch/m68knommu/include/asm/mcfuart.h b/arch/m68knommu/include/asm/mcfuart.h deleted file mode 100644 index ef229387361..00000000000 --- a/arch/m68knommu/include/asm/mcfuart.h +++ /dev/null @@ -1,216 +0,0 @@ -/****************************************************************************/ - -/* - * mcfuart.h -- ColdFire internal UART support defines. - * - * (C) Copyright 1999-2003, Greg Ungerer (gerg@snapgear.com) - * (C) Copyright 2000, Lineo Inc. (www.lineo.com) - */ - -/****************************************************************************/ -#ifndef mcfuart_h -#define mcfuart_h -/****************************************************************************/ - -/* - * Define the base address of the UARTS within the MBAR address - * space. - */ -#if defined(CONFIG_M5272) -#define MCFUART_BASE1 0x100 /* Base address of UART1 */ -#define MCFUART_BASE2 0x140 /* Base address of UART2 */ -#elif defined(CONFIG_M5206) || defined(CONFIG_M5206e) -#if defined(CONFIG_NETtel) -#define MCFUART_BASE1 0x180 /* Base address of UART1 */ -#define MCFUART_BASE2 0x140 /* Base address of UART2 */ -#else -#define MCFUART_BASE1 0x140 /* Base address of UART1 */ -#define MCFUART_BASE2 0x180 /* Base address of UART2 */ -#endif -#elif defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) -#define MCFUART_BASE1 0x200 /* Base address of UART1 */ -#define MCFUART_BASE2 0x240 /* Base address of UART2 */ -#define MCFUART_BASE3 0x280 /* Base address of UART3 */ -#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) -#if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3) -#define MCFUART_BASE1 0x200 /* Base address of UART1 */ -#define MCFUART_BASE2 0x1c0 /* Base address of UART2 */ -#else -#define MCFUART_BASE1 0x1c0 /* Base address of UART1 */ -#define MCFUART_BASE2 0x200 /* Base address of UART2 */ -#endif -#elif defined(CONFIG_M520x) -#define MCFUART_BASE1 0x60000 /* Base address of UART1 */ -#define MCFUART_BASE2 0x64000 /* Base address of UART2 */ -#define MCFUART_BASE3 0x68000 /* Base address of UART2 */ -#elif defined(CONFIG_M532x) -#define MCFUART_BASE1 0xfc060000 /* Base address of UART1 */ -#define MCFUART_BASE2 0xfc064000 /* Base address of UART2 */ -#define MCFUART_BASE3 0xfc068000 /* Base address of UART3 */ -#endif - - -#include <linux/serial_core.h> -#include <linux/platform_device.h> - -struct mcf_platform_uart { - unsigned long mapbase; /* Physical address base */ - void __iomem *membase; /* Virtual address if mapped */ - unsigned int irq; /* Interrupt vector */ - unsigned int uartclk; /* UART clock rate */ -}; - -/* - * Define the ColdFire UART register set addresses. - */ -#define MCFUART_UMR 0x00 /* Mode register (r/w) */ -#define MCFUART_USR 0x04 /* Status register (r) */ -#define MCFUART_UCSR 0x04 /* Clock Select (w) */ -#define MCFUART_UCR 0x08 /* Command register (w) */ -#define MCFUART_URB 0x0c /* Receiver Buffer (r) */ -#define MCFUART_UTB 0x0c /* Transmit Buffer (w) */ -#define MCFUART_UIPCR 0x10 /* Input Port Change (r) */ -#define MCFUART_UACR 0x10 /* Auxiliary Control (w) */ -#define MCFUART_UISR 0x14 /* Interrupt Status (r) */ -#define MCFUART_UIMR 0x14 /* Interrupt Mask (w) */ -#define MCFUART_UBG1 0x18 /* Baud Rate MSB (r/w) */ -#define MCFUART_UBG2 0x1c /* Baud Rate LSB (r/w) */ -#ifdef CONFIG_M5272 -#define MCFUART_UTF 0x28 /* Transmitter FIFO (r/w) */ -#define MCFUART_URF 0x2c /* Receiver FIFO (r/w) */ -#define MCFUART_UFPD 0x30 /* Frac Prec. Divider (r/w) */ -#else -#define MCFUART_UIVR 0x30 /* Interrupt Vector (r/w) */ -#endif -#define MCFUART_UIPR 0x34 /* Input Port (r) */ -#define MCFUART_UOP1 0x38 /* Output Port Bit Set (w) */ -#define MCFUART_UOP0 0x3c /* Output Port Bit Reset (w) */ - - -/* - * Define bit flags in Mode Register 1 (MR1). - */ -#define MCFUART_MR1_RXRTS 0x80 /* Auto RTS flow control */ -#define MCFUART_MR1_RXIRQFULL 0x40 /* RX IRQ type FULL */ -#define MCFUART_MR1_RXIRQRDY 0x00 /* RX IRQ type RDY */ -#define MCFUART_MR1_RXERRBLOCK 0x20 /* RX block error mode */ -#define MCFUART_MR1_RXERRCHAR 0x00 /* RX char error mode */ - -#define MCFUART_MR1_PARITYNONE 0x10 /* No parity */ -#define MCFUART_MR1_PARITYEVEN 0x00 /* Even parity */ -#define MCFUART_MR1_PARITYODD 0x04 /* Odd parity */ -#define MCFUART_MR1_PARITYSPACE 0x08 /* Space parity */ -#define MCFUART_MR1_PARITYMARK 0x0c /* Mark parity */ - -#define MCFUART_MR1_CS5 0x00 /* 5 bits per char */ -#define MCFUART_MR1_CS6 0x01 /* 6 bits per char */ -#define MCFUART_MR1_CS7 0x02 /* 7 bits per char */ -#define MCFUART_MR1_CS8 0x03 /* 8 bits per char */ - -/* - * Define bit flags in Mode Register 2 (MR2). - */ -#define MCFUART_MR2_LOOPBACK 0x80 /* Loopback mode */ -#define MCFUART_MR2_REMOTELOOP 0xc0 /* Remote loopback mode */ -#define MCFUART_MR2_AUTOECHO 0x40 /* Automatic echo */ -#define MCFUART_MR2_TXRTS 0x20 /* Assert RTS on TX */ -#define MCFUART_MR2_TXCTS 0x10 /* Auto CTS flow control */ - -#define MCFUART_MR2_STOP1 0x07 /* 1 stop bit */ -#define MCFUART_MR2_STOP15 0x08 /* 1.5 stop bits */ -#define MCFUART_MR2_STOP2 0x0f /* 2 stop bits */ - -/* - * Define bit flags in Status Register (USR). - */ -#define MCFUART_USR_RXBREAK 0x80 /* Received BREAK */ -#define MCFUART_USR_RXFRAMING 0x40 /* Received framing error */ -#define MCFUART_USR_RXPARITY 0x20 /* Received parity error */ -#define MCFUART_USR_RXOVERRUN 0x10 /* Received overrun error */ -#define MCFUART_USR_TXEMPTY 0x08 /* Transmitter empty */ -#define MCFUART_USR_TXREADY 0x04 /* Transmitter ready */ -#define MCFUART_USR_RXFULL 0x02 /* Receiver full */ -#define MCFUART_USR_RXREADY 0x01 /* Receiver ready */ - -#define MCFUART_USR_RXERR (MCFUART_USR_RXBREAK | MCFUART_USR_RXFRAMING | \ - MCFUART_USR_RXPARITY | MCFUART_USR_RXOVERRUN) - -/* - * Define bit flags in Clock Select Register (UCSR). - */ -#define MCFUART_UCSR_RXCLKTIMER 0xd0 /* RX clock is timer */ -#define MCFUART_UCSR_RXCLKEXT16 0xe0 /* RX clock is external x16 */ -#define MCFUART_UCSR_RXCLKEXT1 0xf0 /* RX clock is external x1 */ - -#define MCFUART_UCSR_TXCLKTIMER 0x0d /* TX clock is timer */ -#define MCFUART_UCSR_TXCLKEXT16 0x0e /* TX clock is external x16 */ -#define MCFUART_UCSR_TXCLKEXT1 0x0f /* TX clock is external x1 */ - -/* - * Define bit flags in Command Register (UCR). - */ -#define MCFUART_UCR_CMDNULL 0x00 /* No command */ -#define MCFUART_UCR_CMDRESETMRPTR 0x10 /* Reset MR pointer */ -#define MCFUART_UCR_CMDRESETRX 0x20 /* Reset receiver */ -#define MCFUART_UCR_CMDRESETTX 0x30 /* Reset transmitter */ -#define MCFUART_UCR_CMDRESETERR 0x40 /* Reset error status */ -#define MCFUART_UCR_CMDRESETBREAK 0x50 /* Reset BREAK change */ -#define MCFUART_UCR_CMDBREAKSTART 0x60 /* Start BREAK */ -#define MCFUART_UCR_CMDBREAKSTOP 0x70 /* Stop BREAK */ - -#define MCFUART_UCR_TXNULL 0x00 /* No TX command */ -#define MCFUART_UCR_TXENABLE 0x04 /* Enable TX */ -#define MCFUART_UCR_TXDISABLE 0x08 /* Disable TX */ -#define MCFUART_UCR_RXNULL 0x00 /* No RX command */ -#define MCFUART_UCR_RXENABLE 0x01 /* Enable RX */ -#define MCFUART_UCR_RXDISABLE 0x02 /* Disable RX */ - -/* - * Define bit flags in Input Port Change Register (UIPCR). - */ -#define MCFUART_UIPCR_CTSCOS 0x10 /* CTS change of state */ -#define MCFUART_UIPCR_CTS 0x01 /* CTS value */ - -/* - * Define bit flags in Input Port Register (UIP). - */ -#define MCFUART_UIPR_CTS 0x01 /* CTS value */ - -/* - * Define bit flags in Output Port Registers (UOP). - * Clear bit by writing to UOP0, set by writing to UOP1. - */ -#define MCFUART_UOP_RTS 0x01 /* RTS set or clear */ - -/* - * Define bit flags in the Auxiliary Control Register (UACR). - */ -#define MCFUART_UACR_IEC 0x01 /* Input enable control */ - -/* - * Define bit flags in Interrupt Status Register (UISR). - * These same bits are used for the Interrupt Mask Register (UIMR). - */ -#define MCFUART_UIR_COS 0x80 /* Change of state (CTS) */ -#define MCFUART_UIR_DELTABREAK 0x04 /* Break start or stop */ -#define MCFUART_UIR_RXREADY 0x02 /* Receiver ready */ -#define MCFUART_UIR_TXREADY 0x01 /* Transmitter ready */ - -#ifdef CONFIG_M5272 -/* - * Define bit flags in the Transmitter FIFO Register (UTF). - */ -#define MCFUART_UTF_TXB 0x1f /* Transmitter data level */ -#define MCFUART_UTF_FULL 0x20 /* Transmitter fifo full */ -#define MCFUART_UTF_TXS 0xc0 /* Transmitter status */ - -/* - * Define bit flags in the Receiver FIFO Register (URF). - */ -#define MCFUART_URF_RXB 0x1f /* Receiver data level */ -#define MCFUART_URF_FULL 0x20 /* Receiver fifo full */ -#define MCFUART_URF_RXS 0xc0 /* Receiver status */ -#endif - -/****************************************************************************/ -#endif /* mcfuart_h */ diff --git a/arch/m68knommu/include/asm/mcfwdebug.h b/arch/m68knommu/include/asm/mcfwdebug.h deleted file mode 100644 index 27f70e45d70..00000000000 --- a/arch/m68knommu/include/asm/mcfwdebug.h +++ /dev/null @@ -1,118 +0,0 @@ -/****************************************************************************/ - -/* - * mcfdebug.h -- ColdFire Debug Module support. - * - * (C) Copyright 2001, Lineo Inc. (www.lineo.com) - */ - -/****************************************************************************/ -#ifndef mcfdebug_h -#define mcfdebug_h -/****************************************************************************/ - -/* Define the debug module registers */ -#define MCFDEBUG_CSR 0x0 /* Configuration status */ -#define MCFDEBUG_BAAR 0x5 /* BDM address attribute */ -#define MCFDEBUG_AATR 0x6 /* Address attribute trigger */ -#define MCFDEBUG_TDR 0x7 /* Trigger definition */ -#define MCFDEBUG_PBR 0x8 /* PC breakpoint */ -#define MCFDEBUG_PBMR 0x9 /* PC breakpoint mask */ -#define MCFDEBUG_ABHR 0xc /* High address breakpoint */ -#define MCFDEBUG_ABLR 0xd /* Low address breakpoint */ -#define MCFDEBUG_DBR 0xe /* Data breakpoint */ -#define MCFDEBUG_DBMR 0xf /* Data breakpoint mask */ - -/* Define some handy constants for the trigger definition register */ -#define MCFDEBUG_TDR_TRC_DISP 0x00000000 /* display on DDATA only */ -#define MCFDEBUG_TDR_TRC_HALT 0x40000000 /* Processor halt on BP */ -#define MCFDEBUG_TDR_TRC_INTR 0x80000000 /* Debug intr on BP */ -#define MCFDEBUG_TDR_LXT1 0x00004000 /* TDR level 1 */ -#define MCFDEBUG_TDR_LXT2 0x00008000 /* TDR level 2 */ -#define MCFDEBUG_TDR_EBL1 0x00002000 /* Enable breakpoint level 1 */ -#define MCFDEBUG_TDR_EBL2 0x20000000 /* Enable breakpoint level 2 */ -#define MCFDEBUG_TDR_EDLW1 0x00001000 /* Enable data BP longword */ -#define MCFDEBUG_TDR_EDLW2 0x10000000 -#define MCFDEBUG_TDR_EDWL1 0x00000800 /* Enable data BP lower word */ -#define MCFDEBUG_TDR_EDWL2 0x08000000 -#define MCFDEBUG_TDR_EDWU1 0x00000400 /* Enable data BP upper word */ -#define MCFDEBUG_TDR_EDWU2 0x04000000 -#define MCFDEBUG_TDR_EDLL1 0x00000200 /* Enable data BP low low byte */ -#define MCFDEBUG_TDR_EDLL2 0x02000000 -#define MCFDEBUG_TDR_EDLM1 0x00000100 /* Enable data BP low mid byte */ -#define MCFDEBUG_TDR_EDLM2 0x01000000 -#define MCFDEBUG_TDR_EDUM1 0x00000080 /* Enable data BP up mid byte */ -#define MCFDEBUG_TDR_EDUM2 0x00800000 -#define MCFDEBUG_TDR_EDUU1 0x00000040 /* Enable data BP up up byte */ -#define MCFDEBUG_TDR_EDUU2 0x00400000 -#define MCFDEBUG_TDR_DI1 0x00000020 /* Data BP invert */ -#define MCFDEBUG_TDR_DI2 0x00200000 -#define MCFDEBUG_TDR_EAI1 0x00000010 /* Enable address BP inverted */ -#define MCFDEBUG_TDR_EAI2 0x00100000 -#define MCFDEBUG_TDR_EAR1 0x00000008 /* Enable address BP range */ -#define MCFDEBUG_TDR_EAR2 0x00080000 -#define MCFDEBUG_TDR_EAL1 0x00000004 /* Enable address BP low */ -#define MCFDEBUG_TDR_EAL2 0x00040000 -#define MCFDEBUG_TDR_EPC1 0x00000002 /* Enable PC BP */ -#define MCFDEBUG_TDR_EPC2 0x00020000 -#define MCFDEBUG_TDR_PCI1 0x00000001 /* PC BP invert */ -#define MCFDEBUG_TDR_PCI2 0x00010000 - -/* Constants for the address attribute trigger register */ -#define MCFDEBUG_AAR_RESET 0x00000005 -/* Fields not yet implemented */ - -/* And some definitions for the writable sections of the CSR */ -#define MCFDEBUG_CSR_RESET 0x00100000 -#define MCFDEBUG_CSR_PSTCLK 0x00020000 /* PSTCLK disable */ -#define MCFDEBUG_CSR_IPW 0x00010000 /* Inhibit processor writes */ -#define MCFDEBUG_CSR_MAP 0x00008000 /* Processor refs in emul mode */ -#define MCFDEBUG_CSR_TRC 0x00004000 /* Emul mode on trace exception */ -#define MCFDEBUG_CSR_EMU 0x00002000 /* Force emulation mode */ -#define MCFDEBUG_CSR_DDC_READ 0x00000800 /* Debug data control */ -#define MCFDEBUG_CSR_DDC_WRITE 0x00001000 -#define MCFDEBUG_CSR_UHE 0x00000400 /* User mode halt enable */ -#define MCFDEBUG_CSR_BTB0 0x00000000 /* Branch target 0 bytes */ -#define MCFDEBUG_CSR_BTB2 0x00000100 /* Branch target 2 bytes */ -#define MCFDEBUG_CSR_BTB3 0x00000200 /* Branch target 3 bytes */ -#define MCFDEBUG_CSR_BTB4 0x00000300 /* Branch target 4 bytes */ -#define MCFDEBUG_CSR_NPL 0x00000040 /* Non-pipelined mode */ -#define MCFDEBUG_CSR_SSM 0x00000010 /* Single step mode */ - -/* Constants for the BDM address attribute register */ -#define MCFDEBUG_BAAR_RESET 0x00000005 -/* Fields not yet implemented */ - - -/* This routine wrappers up the wdebug asm instruction so that the register - * and value can be relatively easily specified. The biggest hassle here is - * that the debug module instructions (2 longs) must be long word aligned and - * some pointer fiddling is performed to ensure this. - */ -static inline void wdebug(int reg, unsigned long data) { - unsigned short dbg_spc[6]; - unsigned short *dbg; - - // Force alignment to long word boundary - dbg = (unsigned short *)((((unsigned long)dbg_spc) + 3) & 0xfffffffc); - - // Build up the debug instruction - dbg[0] = 0x2c80 | (reg & 0xf); - dbg[1] = (data >> 16) & 0xffff; - dbg[2] = data & 0xffff; - dbg[3] = 0; - - // Perform the wdebug instruction -#if 0 - // This strain is for gas which doesn't have the wdebug instructions defined - asm( "move.l %0, %%a0\n\t" - ".word 0xfbd0\n\t" - ".word 0x0003\n\t" - :: "g" (dbg) : "a0"); -#else - // And this is for when it does - asm( "wdebug (%0)" :: "a" (dbg)); -#endif -} - -#endif diff --git a/arch/m68knommu/include/asm/md.h b/arch/m68knommu/include/asm/md.h deleted file mode 100644 index d810c78de5f..00000000000 --- a/arch/m68knommu/include/asm/md.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/md.h> diff --git a/arch/m68knommu/include/asm/mman.h b/arch/m68knommu/include/asm/mman.h deleted file mode 100644 index 4846c682efe..00000000000 --- a/arch/m68knommu/include/asm/mman.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/mman.h> diff --git a/arch/m68knommu/include/asm/mmu.h b/arch/m68knommu/include/asm/mmu.h deleted file mode 100644 index e2da1e6f09f..00000000000 --- a/arch/m68knommu/include/asm/mmu.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef __M68KNOMMU_MMU_H -#define __M68KNOMMU_MMU_H - -/* Copyright (C) 2002, David McCullough <davidm@snapgear.com> */ - -typedef struct { - unsigned long end_brk; -} mm_context_t; - -#endif /* __M68KNOMMU_MMU_H */ diff --git a/arch/m68knommu/include/asm/mmu_context.h b/arch/m68knommu/include/asm/mmu_context.h deleted file mode 100644 index 9ccee4278c9..00000000000 --- a/arch/m68knommu/include/asm/mmu_context.h +++ /dev/null @@ -1,33 +0,0 @@ -#ifndef __M68KNOMMU_MMU_CONTEXT_H -#define __M68KNOMMU_MMU_CONTEXT_H - -#include <asm/setup.h> -#include <asm/page.h> -#include <asm/pgalloc.h> -#include <asm-generic/mm_hooks.h> - -static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) -{ -} - -static inline int -init_new_context(struct task_struct *tsk, struct mm_struct *mm) -{ - // mm->context = virt_to_phys(mm->pgd); - return(0); -} - -#define destroy_context(mm) do { } while(0) - -static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk) -{ -} - -#define deactivate_mm(tsk,mm) do { } while (0) - -static inline void activate_mm(struct mm_struct *prev_mm, - struct mm_struct *next_mm) -{ -} - -#endif diff --git a/arch/m68knommu/include/asm/module.h b/arch/m68knommu/include/asm/module.h deleted file mode 100644 index 2e45ab50b23..00000000000 --- a/arch/m68knommu/include/asm/module.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef ASM_M68KNOMMU_MODULE_H -#define ASM_M68KNOMMU_MODULE_H - -struct mod_arch_specific { -}; - -#define Elf_Shdr Elf32_Shdr -#define Elf_Sym Elf32_Sym -#define Elf_Ehdr Elf32_Ehdr - -#endif /* ASM_M68KNOMMU_MODULE_H */ diff --git a/arch/m68knommu/include/asm/movs.h b/arch/m68knommu/include/asm/movs.h deleted file mode 100644 index 81a16779e83..00000000000 --- a/arch/m68knommu/include/asm/movs.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/movs.h> diff --git a/arch/m68knommu/include/asm/msgbuf.h b/arch/m68knommu/include/asm/msgbuf.h deleted file mode 100644 index bdfadec4d52..00000000000 --- a/arch/m68knommu/include/asm/msgbuf.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/msgbuf.h> diff --git a/arch/m68knommu/include/asm/mutex.h b/arch/m68knommu/include/asm/mutex.h deleted file mode 100644 index 458c1f7fbc1..00000000000 --- a/arch/m68knommu/include/asm/mutex.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * Pull in the generic implementation for the mutex fastpath. - * - * TODO: implement optimized primitives instead, or leave the generic - * implementation in place, or pick the atomic_xchg() based generic - * implementation. (see asm-generic/mutex-xchg.h for details) - */ - -#include <asm-generic/mutex-dec.h> diff --git a/arch/m68knommu/include/asm/nettel.h b/arch/m68knommu/include/asm/nettel.h deleted file mode 100644 index 0299f6a2dee..00000000000 --- a/arch/m68knommu/include/asm/nettel.h +++ /dev/null @@ -1,108 +0,0 @@ -/****************************************************************************/ - -/* - * nettel.h -- Lineo (formerly Moreton Bay) NETtel support. - * - * (C) Copyright 1999-2000, Moreton Bay (www.moretonbay.com) - * (C) Copyright 2000-2001, Lineo Inc. (www.lineo.com) - * (C) Copyright 2001-2002, SnapGear Inc., (www.snapgear.com) - */ - -/****************************************************************************/ -#ifndef nettel_h -#define nettel_h -/****************************************************************************/ - - -/****************************************************************************/ -#ifdef CONFIG_NETtel -/****************************************************************************/ - -#ifdef CONFIG_COLDFIRE -#include <asm/coldfire.h> -#include <asm/mcfsim.h> -#endif - -/*---------------------------------------------------------------------------*/ -#if defined(CONFIG_M5307) -/* - * NETtel/5307 based hardware first. DTR/DCD lines are wired to - * GPIO lines. Most of the LED's are driver through a latch - * connected to CS2. - */ -#define MCFPP_DCD1 0x0001 -#define MCFPP_DCD0 0x0002 -#define MCFPP_DTR1 0x0004 -#define MCFPP_DTR0 0x0008 - -#define NETtel_LEDADDR 0x30400000 - -#ifndef __ASSEMBLY__ - -extern volatile unsigned short ppdata; - -/* - * These functions defined to give quasi generic access to the - * PPIO bits used for DTR/DCD. - */ -static __inline__ unsigned int mcf_getppdata(void) -{ - volatile unsigned short *pp; - pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PADAT); - return((unsigned int) *pp); -} - -static __inline__ void mcf_setppdata(unsigned int mask, unsigned int bits) -{ - volatile unsigned short *pp; - pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PADAT); - ppdata = (ppdata & ~mask) | bits; - *pp = ppdata; -} -#endif - -/*---------------------------------------------------------------------------*/ -#elif defined(CONFIG_M5206e) -/* - * NETtel/5206e based hardware has leds on latch on CS3. - * No support modem for lines?? - */ -#define NETtel_LEDADDR 0x50000000 - -/*---------------------------------------------------------------------------*/ -#elif defined(CONFIG_M5272) -/* - * NETtel/5272 based hardware. DTR/DCD lines are wired to GPB lines. - */ -#define MCFPP_DCD0 0x0080 -#define MCFPP_DCD1 0x0000 /* Port 1 no DCD support */ -#define MCFPP_DTR0 0x0040 -#define MCFPP_DTR1 0x0000 /* Port 1 no DTR support */ - -#ifndef __ASSEMBLY__ -/* - * These functions defined to give quasi generic access to the - * PPIO bits used for DTR/DCD. - */ -static __inline__ unsigned int mcf_getppdata(void) -{ - volatile unsigned short *pp; - pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PBDAT); - return((unsigned int) *pp); -} - -static __inline__ void mcf_setppdata(unsigned int mask, unsigned int bits) -{ - volatile unsigned short *pp; - pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PBDAT); - *pp = (*pp & ~mask) | bits; -} -#endif - -#endif -/*---------------------------------------------------------------------------*/ - -/****************************************************************************/ -#endif /* CONFIG_NETtel */ -/****************************************************************************/ -#endif /* nettel_h */ diff --git a/arch/m68knommu/include/asm/openprom.h b/arch/m68knommu/include/asm/openprom.h deleted file mode 100644 index fdba7953ff9..00000000000 --- a/arch/m68knommu/include/asm/openprom.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/openprom.h> diff --git a/arch/m68knommu/include/asm/oplib.h b/arch/m68knommu/include/asm/oplib.h deleted file mode 100644 index ce079dc332d..00000000000 --- a/arch/m68knommu/include/asm/oplib.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/oplib.h> diff --git a/arch/m68knommu/include/asm/page.h b/arch/m68knommu/include/asm/page.h deleted file mode 100644 index 3a1ede4544c..00000000000 --- a/arch/m68knommu/include/asm/page.h +++ /dev/null @@ -1,77 +0,0 @@ -#ifndef _M68KNOMMU_PAGE_H -#define _M68KNOMMU_PAGE_H - -/* PAGE_SHIFT determines the page size */ - -#define PAGE_SHIFT (12) -#define PAGE_SIZE (1UL << PAGE_SHIFT) -#define PAGE_MASK (~(PAGE_SIZE-1)) - -#include <asm/setup.h> - -#ifndef __ASSEMBLY__ - -#define get_user_page(vaddr) __get_free_page(GFP_KERNEL) -#define free_user_page(page, addr) free_page(addr) - -#define clear_page(page) memset((page), 0, PAGE_SIZE) -#define copy_page(to,from) memcpy((to), (from), PAGE_SIZE) - -#define clear_user_page(page, vaddr, pg) clear_page(page) -#define copy_user_page(to, from, vaddr, pg) copy_page(to, from) - -#define __alloc_zeroed_user_highpage(movableflags, vma, vaddr) \ - alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO | movableflags, vma, vaddr) -#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE - -/* - * These are used to make use of C type-checking.. - */ -typedef struct { unsigned long pte; } pte_t; -typedef struct { unsigned long pmd[16]; } pmd_t; -typedef struct { unsigned long pgd; } pgd_t; -typedef struct { unsigned long pgprot; } pgprot_t; -typedef struct page *pgtable_t; - -#define pte_val(x) ((x).pte) -#define pmd_val(x) ((&x)->pmd[0]) -#define pgd_val(x) ((x).pgd) -#define pgprot_val(x) ((x).pgprot) - -#define __pte(x) ((pte_t) { (x) } ) -#define __pmd(x) ((pmd_t) { (x) } ) -#define __pgd(x) ((pgd_t) { (x) } ) -#define __pgprot(x) ((pgprot_t) { (x) } ) - -extern unsigned long memory_start; -extern unsigned long memory_end; - -#endif /* !__ASSEMBLY__ */ - -#include <asm/page_offset.h> - -#define PAGE_OFFSET (PAGE_OFFSET_RAW) - -#ifndef __ASSEMBLY__ - -#define __pa(vaddr) virt_to_phys((void *)(vaddr)) -#define __va(paddr) phys_to_virt((unsigned long)(paddr)) - -#define virt_to_pfn(kaddr) (__pa(kaddr) >> PAGE_SHIFT) -#define pfn_to_virt(pfn) __va((pfn) << PAGE_SHIFT) - -#define virt_to_page(addr) (mem_map + (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT)) -#define page_to_virt(page) ((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET) - -#define pfn_to_page(pfn) virt_to_page(pfn_to_virt(pfn)) -#define page_to_pfn(page) virt_to_pfn(page_to_virt(page)) -#define pfn_valid(pfn) ((pfn) < max_mapnr) - -#define virt_addr_valid(kaddr) (((void *)(kaddr) >= (void *)PAGE_OFFSET) && \ - ((void *)(kaddr) < (void *)memory_end)) - -#endif /* __ASSEMBLY__ */ - -#include <asm-generic/page.h> - -#endif /* _M68KNOMMU_PAGE_H */ diff --git a/arch/m68knommu/include/asm/page_offset.h b/arch/m68knommu/include/asm/page_offset.h deleted file mode 100644 index d4e73e0ba64..00000000000 --- a/arch/m68knommu/include/asm/page_offset.h +++ /dev/null @@ -1,5 +0,0 @@ - - -/* This handles the memory map.. */ -#define PAGE_OFFSET_RAW CONFIG_RAMBASE - diff --git a/arch/m68knommu/include/asm/param.h b/arch/m68knommu/include/asm/param.h deleted file mode 100644 index 6044397adb6..00000000000 --- a/arch/m68knommu/include/asm/param.h +++ /dev/null @@ -1,22 +0,0 @@ -#ifndef _M68KNOMMU_PARAM_H -#define _M68KNOMMU_PARAM_H - -#ifdef __KERNEL__ -#define HZ CONFIG_HZ -#define USER_HZ HZ -#define CLOCKS_PER_SEC (USER_HZ) -#endif - -#ifndef HZ -#define HZ 100 -#endif - -#define EXEC_PAGESIZE 4096 - -#ifndef NOGROUP -#define NOGROUP (-1) -#endif - -#define MAXHOSTNAMELEN 64 /* max length of hostname */ - -#endif /* _M68KNOMMU_PARAM_H */ diff --git a/arch/m68knommu/include/asm/pci.h b/arch/m68knommu/include/asm/pci.h deleted file mode 100644 index a13f3cc8745..00000000000 --- a/arch/m68knommu/include/asm/pci.h +++ /dev/null @@ -1,29 +0,0 @@ -#ifndef M68KNOMMU_PCI_H -#define M68KNOMMU_PCI_H - -#include <asm-m68k/pci.h> - -#ifdef CONFIG_COMEMPCI -/* - * These are pretty much arbitary with the CoMEM implementation. - * We have the whole address space to ourselves. - */ -#define PCIBIOS_MIN_IO 0x100 -#define PCIBIOS_MIN_MEM 0x00010000 - -#define pcibios_scan_all_fns(a, b) 0 - -/* - * Return whether the given PCI device DMA address mask can - * be supported properly. For example, if your device can - * only drive the low 24-bits during PCI bus mastering, then - * you would pass 0x00ffffff as the mask to this function. - */ -static inline int pci_dma_supported(struct pci_dev *hwdev, u64 mask) -{ - return 1; -} - -#endif /* CONFIG_COMEMPCI */ - -#endif /* M68KNOMMU_PCI_H */ diff --git a/arch/m68knommu/include/asm/percpu.h b/arch/m68knommu/include/asm/percpu.h deleted file mode 100644 index 5de72c327ef..00000000000 --- a/arch/m68knommu/include/asm/percpu.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ARCH_M68KNOMMU_PERCPU__ -#define __ARCH_M68KNOMMU_PERCPU__ - -#include <asm-generic/percpu.h> - -#endif /* __ARCH_M68KNOMMU_PERCPU__ */ diff --git a/arch/m68knommu/include/asm/pgalloc.h b/arch/m68knommu/include/asm/pgalloc.h deleted file mode 100644 index d6352f671ec..00000000000 --- a/arch/m68knommu/include/asm/pgalloc.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef _M68KNOMMU_PGALLOC_H -#define _M68KNOMMU_PGALLOC_H - -#include <asm/setup.h> - -#define check_pgt_cache() do { } while (0) - -#endif /* _M68KNOMMU_PGALLOC_H */ diff --git a/arch/m68knommu/include/asm/pgtable.h b/arch/m68knommu/include/asm/pgtable.h deleted file mode 100644 index 46251016e82..00000000000 --- a/arch/m68knommu/include/asm/pgtable.h +++ /dev/null @@ -1,70 +0,0 @@ -#ifndef _M68KNOMMU_PGTABLE_H -#define _M68KNOMMU_PGTABLE_H - -#include <asm-generic/4level-fixup.h> - -/* - * (C) Copyright 2000-2002, Greg Ungerer <gerg@snapgear.com> - */ - -#include <linux/slab.h> -#include <asm/processor.h> -#include <asm/page.h> -#include <asm/io.h> - -/* - * Trivial page table functions. - */ -#define pgd_present(pgd) (1) -#define pgd_none(pgd) (0) -#define pgd_bad(pgd) (0) -#define pgd_clear(pgdp) -#define kern_addr_valid(addr) (1) -#define pmd_offset(a, b) ((void *)0) - -#define PAGE_NONE __pgprot(0) -#define PAGE_SHARED __pgprot(0) -#define PAGE_COPY __pgprot(0) -#define PAGE_READONLY __pgprot(0) -#define PAGE_KERNEL __pgprot(0) - -extern void paging_init(void); -#define swapper_pg_dir ((pgd_t *) 0) - -#define __swp_type(x) (0) -#define __swp_offset(x) (0) -#define __swp_entry(typ,off) ((swp_entry_t) { ((typ) | ((off) << 7)) }) -#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) -#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) - -static inline int pte_file(pte_t pte) { return 0; } - -/* - * ZERO_PAGE is a global shared page that is always zero: used - * for zero-mapped memory areas etc.. - */ -#define ZERO_PAGE(vaddr) (virt_to_page(0)) - -/* - * These would be in other places but having them here reduces the diffs. - */ -extern unsigned int kobjsize(const void *objp); - -/* - * No page table caches to initialise. - */ -#define pgtable_cache_init() do { } while (0) - -#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \ - remap_pfn_range(vma, vaddr, pfn, size, prot) - -/* - * All 32bit addresses are effectively valid for vmalloc... - * Sort of meaningless for non-VM targets. - */ -#define VMALLOC_START 0 -#define VMALLOC_END 0xffffffff - -#include <asm-generic/pgtable.h> - -#endif /* _M68KNOMMU_PGTABLE_H */ diff --git a/arch/m68knommu/include/asm/poll.h b/arch/m68knommu/include/asm/poll.h deleted file mode 100644 index ee1b6cb549c..00000000000 --- a/arch/m68knommu/include/asm/poll.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/poll.h> diff --git a/arch/m68knommu/include/asm/posix_types.h b/arch/m68knommu/include/asm/posix_types.h deleted file mode 100644 index 6205fb9392a..00000000000 --- a/arch/m68knommu/include/asm/posix_types.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/posix_types.h> diff --git a/arch/m68knommu/include/asm/processor.h b/arch/m68knommu/include/asm/processor.h deleted file mode 100644 index 91cba18acdd..00000000000 --- a/arch/m68knommu/include/asm/processor.h +++ /dev/null @@ -1,143 +0,0 @@ -/* - * include/asm-m68knommu/processor.h - * - * Copyright (C) 1995 Hamish Macdonald - */ - -#ifndef __ASM_M68K_PROCESSOR_H -#define __ASM_M68K_PROCESSOR_H - -/* - * Default implementation of macro that returns current - * instruction pointer ("program counter"). - */ -#define current_text_addr() ({ __label__ _l; _l: &&_l;}) - -#include <linux/compiler.h> -#include <linux/threads.h> -#include <asm/types.h> -#include <asm/segment.h> -#include <asm/fpu.h> -#include <asm/ptrace.h> -#include <asm/current.h> - -static inline unsigned long rdusp(void) -{ -#ifdef CONFIG_COLDFIRE - extern unsigned int sw_usp; - return(sw_usp); -#else - unsigned long usp; - __asm__ __volatile__("move %/usp,%0" : "=a" (usp)); - return usp; -#endif -} - -static inline void wrusp(unsigned long usp) -{ -#ifdef CONFIG_COLDFIRE - extern unsigned int sw_usp; - sw_usp = usp; -#else - __asm__ __volatile__("move %0,%/usp" : : "a" (usp)); -#endif -} - -/* - * User space process size: 3.75GB. This is hardcoded into a few places, - * so don't change it unless you know what you are doing. - */ -#define TASK_SIZE (0xF0000000UL) - -/* - * This decides where the kernel will search for a free chunk of vm - * space during mmap's. We won't be using it - */ -#define TASK_UNMAPPED_BASE 0 - -/* - * if you change this structure, you must change the code and offsets - * in m68k/machasm.S - */ - -struct thread_struct { - unsigned long ksp; /* kernel stack pointer */ - unsigned long usp; /* user stack pointer */ - unsigned short sr; /* saved status register */ - unsigned short fs; /* saved fs (sfc, dfc) */ - unsigned long crp[2]; /* cpu root pointer */ - unsigned long esp0; /* points to SR of stack frame */ - unsigned long fp[8*3]; - unsigned long fpcntl[3]; /* fp control regs */ - unsigned char fpstate[FPSTATESIZE]; /* floating point state */ -}; - -#define INIT_THREAD { \ - sizeof(init_stack) + (unsigned long) init_stack, 0, \ - PS_S, __KERNEL_DS, \ - {0, 0}, 0, {0,}, {0, 0, 0}, {0,}, \ -} - -/* - * Coldfire stacks need to be re-aligned on trap exit, conventional - * 68k can handle this case cleanly. - */ -#if defined(CONFIG_COLDFIRE) -#define reformat(_regs) do { (_regs)->format = 0x4; } while(0) -#else -#define reformat(_regs) do { } while (0) -#endif - -/* - * Do necessary setup to start up a newly executed thread. - * - * pass the data segment into user programs if it exists, - * it can't hurt anything as far as I can tell - */ -#define start_thread(_regs, _pc, _usp) \ -do { \ - set_fs(USER_DS); /* reads from user space */ \ - (_regs)->pc = (_pc); \ - ((struct switch_stack *)(_regs))[-1].a6 = 0; \ - reformat(_regs); \ - if (current->mm) \ - (_regs)->d5 = current->mm->start_data; \ - (_regs)->sr &= ~0x2000; \ - wrusp(_usp); \ -} while(0) - -/* Forward declaration, a strange C thing */ -struct task_struct; - -/* Free all resources held by a thread. */ -static inline void release_thread(struct task_struct *dead_task) -{ -} - -/* Prepare to copy thread state - unlazy all lazy status */ -#define prepare_to_copy(tsk) do { } while (0) - -extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); - -/* - * Free current thread data structures etc.. - */ -static inline void exit_thread(void) -{ -} - -unsigned long thread_saved_pc(struct task_struct *tsk); -unsigned long get_wchan(struct task_struct *p); - -#define KSTK_EIP(tsk) \ - ({ \ - unsigned long eip = 0; \ - if ((tsk)->thread.esp0 > PAGE_SIZE && \ - (virt_addr_valid((tsk)->thread.esp0))) \ - eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc; \ - eip; }) -#define KSTK_ESP(tsk) ((tsk) == current ? rdusp() : (tsk)->thread.usp) - -#define cpu_relax() barrier() - -#endif diff --git a/arch/m68knommu/include/asm/ptrace.h b/arch/m68knommu/include/asm/ptrace.h deleted file mode 100644 index 8c9194b9854..00000000000 --- a/arch/m68knommu/include/asm/ptrace.h +++ /dev/null @@ -1,87 +0,0 @@ -#ifndef _M68K_PTRACE_H -#define _M68K_PTRACE_H - -#define PT_D1 0 -#define PT_D2 1 -#define PT_D3 2 -#define PT_D4 3 -#define PT_D5 4 -#define PT_D6 5 -#define PT_D7 6 -#define PT_A0 7 -#define PT_A1 8 -#define PT_A2 9 -#define PT_A3 10 -#define PT_A4 11 -#define PT_A5 12 -#define PT_A6 13 -#define PT_D0 14 -#define PT_USP 15 -#define PT_ORIG_D0 16 -#define PT_SR 17 -#define PT_PC 18 - -#ifndef __ASSEMBLY__ - -/* this struct defines the way the registers are stored on the - stack during a system call. */ - -struct pt_regs { - long d1; - long d2; - long d3; - long d4; - long d5; - long a0; - long a1; - long a2; - long d0; - long orig_d0; - long stkadj; -#ifdef CONFIG_COLDFIRE - unsigned format : 4; /* frame format specifier */ - unsigned vector : 12; /* vector offset */ - unsigned short sr; - unsigned long pc; -#else - unsigned short sr; - unsigned long pc; - unsigned format : 4; /* frame format specifier */ - unsigned vector : 12; /* vector offset */ -#endif -}; - -/* - * This is the extended stack used by signal handlers and the context - * switcher: it's pushed after the normal "struct pt_regs". - */ -struct switch_stack { - unsigned long d6; - unsigned long d7; - unsigned long a3; - unsigned long a4; - unsigned long a5; - unsigned long a6; - unsigned long retpc; -}; - -/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */ -#define PTRACE_GETREGS 12 -#define PTRACE_SETREGS 13 -#define PTRACE_GETFPREGS 14 -#define PTRACE_SETFPREGS 15 - -#ifdef __KERNEL__ - -#ifndef PS_S -#define PS_S (0x2000) -#define PS_M (0x1000) -#endif - -#define user_mode(regs) (!((regs)->sr & PS_S)) -#define instruction_pointer(regs) ((regs)->pc) -#define profile_pc(regs) instruction_pointer(regs) -extern void show_regs(struct pt_regs *); -#endif /* __KERNEL__ */ -#endif /* __ASSEMBLY__ */ -#endif /* _M68K_PTRACE_H */ diff --git a/arch/m68knommu/include/asm/quicc_simple.h b/arch/m68knommu/include/asm/quicc_simple.h deleted file mode 100644 index c3636932d4b..00000000000 --- a/arch/m68knommu/include/asm/quicc_simple.h +++ /dev/null @@ -1,52 +0,0 @@ -/*********************************** - * $Id: quicc_simple.h,v 1.1 2002/03/02 15:01:10 gerg Exp $ - *********************************** - * - *************************************** - * Simple drivers common header - *************************************** - */ - -#ifndef __SIMPLE_H -#define __SIMPLE_H - -/* #include "quicc.h" */ - -#define GLB_SCC_0 0 -#define GLB_SCC_1 1 -#define GLB_SCC_2 2 -#define GLB_SCC_3 3 - -typedef void (int_routine)(unsigned short interrupt_event); -typedef int_routine *int_routine_ptr; -typedef void *(alloc_routine)(int length); -typedef void (free_routine)(int scc_num, int channel_num, void *buf); -typedef void (store_rx_buffer_routine)(int scc_num, int channel_num, void *buff, int length); -typedef int (handle_tx_error_routine)(int scc_num, int channel_num, QUICC_BD *tbd); -typedef void (handle_rx_error_routine)(int scc_num, int channel_num, QUICC_BD *rbd); -typedef void (handle_lost_error_routine)(int scc_num, int channel_num); - -/* user defined functions for global errors */ -typedef void (handle_glob_overrun_routine)(int scc_number); -typedef void (handle_glob_underrun_routine)(int scc_number); -typedef void (glob_intr_q_overflow_routine)(int scc_number); - -/* - * General initialization and command routines - */ -void quicc_issue_cmd (unsigned short cmd, int scc_num); -void quicc_init(void); -void quicc_scc_init(int scc_number, int number_of_rx_buf, int number_of_tx_buf); -void quicc_smc_init(int smc_number, int number_of_rx_buf, int number_of_tx_buf); -void quicc_scc_start(int scc_num); -void quicc_scc_loopback(int scc_num); - -/* Interrupt enable/disable routines for critical pieces of code*/ -unsigned short IntrDis(void); -void IntrEna(unsigned short old_sr); - -/* For debugging */ -void print_rbd(int scc_num); -void print_tbd(int scc_num); - -#endif diff --git a/arch/m68knommu/include/asm/resource.h b/arch/m68knommu/include/asm/resource.h deleted file mode 100644 index 7fa63d5ea57..00000000000 --- a/arch/m68knommu/include/asm/resource.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/resource.h> diff --git a/arch/m68knommu/include/asm/rtc.h b/arch/m68knommu/include/asm/rtc.h deleted file mode 100644 index eaf18ec83c8..00000000000 --- a/arch/m68knommu/include/asm/rtc.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/rtc.h> diff --git a/arch/m68knommu/include/asm/scatterlist.h b/arch/m68knommu/include/asm/scatterlist.h deleted file mode 100644 index afc4788b0d2..00000000000 --- a/arch/m68knommu/include/asm/scatterlist.h +++ /dev/null @@ -1,22 +0,0 @@ -#ifndef _M68KNOMMU_SCATTERLIST_H -#define _M68KNOMMU_SCATTERLIST_H - -#include <linux/mm.h> -#include <asm/types.h> - -struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif - unsigned long page_link; - unsigned int offset; - dma_addr_t dma_address; - unsigned int length; -}; - -#define sg_dma_address(sg) ((sg)->dma_address) -#define sg_dma_len(sg) ((sg)->length) - -#define ISA_DMA_THRESHOLD (0xffffffff) - -#endif /* !(_M68KNOMMU_SCATTERLIST_H) */ diff --git a/arch/m68knommu/include/asm/sections.h b/arch/m68knommu/include/asm/sections.h deleted file mode 100644 index dd0ecb98ec0..00000000000 --- a/arch/m68knommu/include/asm/sections.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef _M68KNOMMU_SECTIONS_H -#define _M68KNOMMU_SECTIONS_H - -/* nothing to see, move along */ -#include <asm-generic/sections.h> - -#endif diff --git a/arch/m68knommu/include/asm/segment.h b/arch/m68knommu/include/asm/segment.h deleted file mode 100644 index 42318ebec7e..00000000000 --- a/arch/m68knommu/include/asm/segment.h +++ /dev/null @@ -1,51 +0,0 @@ -#ifndef _M68K_SEGMENT_H -#define _M68K_SEGMENT_H - -/* define constants */ -/* Address spaces (FC0-FC2) */ -#define USER_DATA (1) -#ifndef __USER_DS -#define __USER_DS (USER_DATA) -#endif -#define USER_PROGRAM (2) -#define SUPER_DATA (5) -#ifndef __KERNEL_DS -#define __KERNEL_DS (SUPER_DATA) -#endif -#define SUPER_PROGRAM (6) -#define CPU_SPACE (7) - -#ifndef __ASSEMBLY__ - -typedef struct { - unsigned long seg; -} mm_segment_t; - -#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) -#define USER_DS MAKE_MM_SEG(__USER_DS) -#define KERNEL_DS MAKE_MM_SEG(__KERNEL_DS) - -/* - * Get/set the SFC/DFC registers for MOVES instructions - */ - -static inline mm_segment_t get_fs(void) -{ - return USER_DS; -} - -static inline mm_segment_t get_ds(void) -{ - /* return the supervisor data space code */ - return KERNEL_DS; -} - -static inline void set_fs(mm_segment_t val) -{ -} - -#define segment_eq(a,b) ((a).seg == (b).seg) - -#endif /* __ASSEMBLY__ */ - -#endif /* _M68K_SEGMENT_H */ diff --git a/arch/m68knommu/include/asm/sembuf.h b/arch/m68knommu/include/asm/sembuf.h deleted file mode 100644 index 3a634f9ecf5..00000000000 --- a/arch/m68knommu/include/asm/sembuf.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/sembuf.h> diff --git a/arch/m68knommu/include/asm/setup.h b/arch/m68knommu/include/asm/setup.h deleted file mode 100644 index fb86bb2a607..00000000000 --- a/arch/m68knommu/include/asm/setup.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifdef __KERNEL__ - -#include <asm-m68k/setup.h> - -/* We have a bigger command line buffer. */ -#undef COMMAND_LINE_SIZE - -#endif /* __KERNEL__ */ - -#define COMMAND_LINE_SIZE 512 diff --git a/arch/m68knommu/include/asm/shm.h b/arch/m68knommu/include/asm/shm.h deleted file mode 100644 index cc8e522d905..00000000000 --- a/arch/m68knommu/include/asm/shm.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/shm.h> diff --git a/arch/m68knommu/include/asm/shmbuf.h b/arch/m68knommu/include/asm/shmbuf.h deleted file mode 100644 index bc34cf8eefc..00000000000 --- a/arch/m68knommu/include/asm/shmbuf.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/shmbuf.h> diff --git a/arch/m68knommu/include/asm/shmparam.h b/arch/m68knommu/include/asm/shmparam.h deleted file mode 100644 index d7ee69648eb..00000000000 --- a/arch/m68knommu/include/asm/shmparam.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/shmparam.h> diff --git a/arch/m68knommu/include/asm/sigcontext.h b/arch/m68knommu/include/asm/sigcontext.h deleted file mode 100644 index 36c293fc133..00000000000 --- a/arch/m68knommu/include/asm/sigcontext.h +++ /dev/null @@ -1,17 +0,0 @@ -#ifndef _ASM_M68KNOMMU_SIGCONTEXT_H -#define _ASM_M68KNOMMU_SIGCONTEXT_H - -struct sigcontext { - unsigned long sc_mask; /* old sigmask */ - unsigned long sc_usp; /* old user stack pointer */ - unsigned long sc_d0; - unsigned long sc_d1; - unsigned long sc_a0; - unsigned long sc_a1; - unsigned long sc_a5; - unsigned short sc_sr; - unsigned long sc_pc; - unsigned short sc_formatvec; -}; - -#endif diff --git a/arch/m68knommu/include/asm/siginfo.h b/arch/m68knommu/include/asm/siginfo.h deleted file mode 100644 index b18e5f4064a..00000000000 --- a/arch/m68knommu/include/asm/siginfo.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _M68KNOMMU_SIGINFO_H -#define _M68KNOMMU_SIGINFO_H - -#include <asm-generic/siginfo.h> - -#endif diff --git a/arch/m68knommu/include/asm/signal.h b/arch/m68knommu/include/asm/signal.h deleted file mode 100644 index 216c08be54a..00000000000 --- a/arch/m68knommu/include/asm/signal.h +++ /dev/null @@ -1,159 +0,0 @@ -#ifndef _M68KNOMMU_SIGNAL_H -#define _M68KNOMMU_SIGNAL_H - -#include <linux/types.h> - -/* Avoid too many header ordering problems. */ -struct siginfo; - -#ifdef __KERNEL__ -/* Most things should be clean enough to redefine this at will, if care - is taken to make libc match. */ - -#define _NSIG 64 -#define _NSIG_BPW 32 -#define _NSIG_WORDS (_NSIG / _NSIG_BPW) - -typedef unsigned long old_sigset_t; /* at least 32 bits */ - -typedef struct { - unsigned long sig[_NSIG_WORDS]; -} sigset_t; - -#else -/* Here we must cater to libcs that poke about in kernel headers. */ - -#define NSIG 32 -typedef unsigned long sigset_t; - -#endif /* __KERNEL__ */ - -#define SIGHUP 1 -#define SIGINT 2 -#define SIGQUIT 3 -#define SIGILL 4 -#define SIGTRAP 5 -#define SIGABRT 6 -#define SIGIOT 6 -#define SIGBUS 7 -#define SIGFPE 8 -#define SIGKILL 9 -#define SIGUSR1 10 -#define SIGSEGV 11 -#define SIGUSR2 12 -#define SIGPIPE 13 -#define SIGALRM 14 -#define SIGTERM 15 -#define SIGSTKFLT 16 -#define SIGCHLD 17 -#define SIGCONT 18 -#define SIGSTOP 19 -#define SIGTSTP 20 -#define SIGTTIN 21 -#define SIGTTOU 22 -#define SIGURG 23 -#define SIGXCPU 24 -#define SIGXFSZ 25 -#define SIGVTALRM 26 -#define SIGPROF 27 -#define SIGWINCH 28 -#define SIGIO 29 -#define SIGPOLL SIGIO -/* -#define SIGLOST 29 -*/ -#define SIGPWR 30 -#define SIGSYS 31 -#define SIGUNUSED 31 - -/* These should not be considered constants from userland. */ -#define SIGRTMIN 32 -#define SIGRTMAX _NSIG - -/* - * SA_FLAGS values: - * - * SA_ONSTACK indicates that a registered stack_t will be used. - * SA_RESTART flag to get restarting signals (which were the default long ago) - * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. - * SA_RESETHAND clears the handler when the signal is delivered. - * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. - * SA_NODEFER prevents the current signal from being masked in the handler. - * - * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single - * Unix names RESETHAND and NODEFER respectively. - */ -#define SA_NOCLDSTOP 0x00000001 -#define SA_NOCLDWAIT 0x00000002 -#define SA_SIGINFO 0x00000004 -#define SA_ONSTACK 0x08000000 -#define SA_RESTART 0x10000000 -#define SA_NODEFER 0x40000000 -#define SA_RESETHAND 0x80000000 - -#define SA_NOMASK SA_NODEFER -#define SA_ONESHOT SA_RESETHAND - -/* - * sigaltstack controls - */ -#define SS_ONSTACK 1 -#define SS_DISABLE 2 - -#define MINSIGSTKSZ 2048 -#define SIGSTKSZ 8192 - -#include <asm-generic/signal.h> - -#ifdef __KERNEL__ -struct old_sigaction { - __sighandler_t sa_handler; - old_sigset_t sa_mask; - unsigned long sa_flags; - void (*sa_restorer)(void); -}; - -struct sigaction { - __sighandler_t sa_handler; - unsigned long sa_flags; - void (*sa_restorer)(void); - sigset_t sa_mask; /* mask last for extensibility */ -}; - -struct k_sigaction { - struct sigaction sa; -}; -#else -/* Here we must cater to libcs that poke about in kernel headers. */ - -struct sigaction { - union { - __sighandler_t _sa_handler; - void (*_sa_sigaction)(int, struct siginfo *, void *); - } _u; - sigset_t sa_mask; - unsigned long sa_flags; - void (*sa_restorer)(void); -}; - -#define sa_handler _u._sa_handler -#define sa_sigaction _u._sa_sigaction - -#endif /* __KERNEL__ */ - -typedef struct sigaltstack { - void *ss_sp; - int ss_flags; - size_t ss_size; -} stack_t; - -#ifdef __KERNEL__ - -#include <asm/sigcontext.h> -#undef __HAVE_ARCH_SIG_BITOPS - -#define ptrace_signal_deliver(regs, cookie) do { } while (0) - -#endif /* __KERNEL__ */ - -#endif /* _M68KNOMMU_SIGNAL_H */ diff --git a/arch/m68knommu/include/asm/smp.h b/arch/m68knommu/include/asm/smp.h deleted file mode 100644 index 9e9bd7e5892..00000000000 --- a/arch/m68knommu/include/asm/smp.h +++ /dev/null @@ -1 +0,0 @@ -/* nothing required here yet */ diff --git a/arch/m68knommu/include/asm/socket.h b/arch/m68knommu/include/asm/socket.h deleted file mode 100644 index ac5478bf637..00000000000 --- a/arch/m68knommu/include/asm/socket.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/socket.h> diff --git a/arch/m68knommu/include/asm/sockios.h b/arch/m68knommu/include/asm/sockios.h deleted file mode 100644 index dcc6a8900ce..00000000000 --- a/arch/m68knommu/include/asm/sockios.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/sockios.h> diff --git a/arch/m68knommu/include/asm/spinlock.h b/arch/m68knommu/include/asm/spinlock.h deleted file mode 100644 index 6bb1f06c478..00000000000 --- a/arch/m68knommu/include/asm/spinlock.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/spinlock.h> diff --git a/arch/m68knommu/include/asm/stat.h b/arch/m68knommu/include/asm/stat.h deleted file mode 100644 index 3d4b260e7c0..00000000000 --- a/arch/m68knommu/include/asm/stat.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/stat.h> diff --git a/arch/m68knommu/include/asm/statfs.h b/arch/m68knommu/include/asm/statfs.h deleted file mode 100644 index 2ce99eaf097..00000000000 --- a/arch/m68knommu/include/asm/statfs.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/statfs.h> diff --git a/arch/m68knommu/include/asm/string.h b/arch/m68knommu/include/asm/string.h deleted file mode 100644 index af09e17000f..00000000000 --- a/arch/m68knommu/include/asm/string.h +++ /dev/null @@ -1,126 +0,0 @@ -#ifndef _M68KNOMMU_STRING_H_ -#define _M68KNOMMU_STRING_H_ - -#ifdef __KERNEL__ /* only set these up for kernel code */ - -#include <asm/setup.h> -#include <asm/page.h> - -#define __HAVE_ARCH_STRCPY -static inline char * strcpy(char * dest,const char *src) -{ - char *xdest = dest; - - __asm__ __volatile__ - ("1:\tmoveb %1@+,%0@+\n\t" - "jne 1b" - : "=a" (dest), "=a" (src) - : "0" (dest), "1" (src) : "memory"); - return xdest; -} - -#define __HAVE_ARCH_STRNCPY -static inline char * strncpy(char *dest, const char *src, size_t n) -{ - char *xdest = dest; - - if (n == 0) - return xdest; - - __asm__ __volatile__ - ("1:\tmoveb %1@+,%0@+\n\t" - "jeq 2f\n\t" - "subql #1,%2\n\t" - "jne 1b\n\t" - "2:" - : "=a" (dest), "=a" (src), "=d" (n) - : "0" (dest), "1" (src), "2" (n) - : "memory"); - return xdest; -} - - -#ifndef CONFIG_COLDFIRE - -#define __HAVE_ARCH_STRCMP -static inline int strcmp(const char * cs,const char * ct) -{ - char __res; - - __asm__ - ("1:\tmoveb %0@+,%2\n\t" /* get *cs */ - "cmpb %1@+,%2\n\t" /* compare a byte */ - "jne 2f\n\t" /* not equal, break out */ - "tstb %2\n\t" /* at end of cs? */ - "jne 1b\n\t" /* no, keep going */ - "jra 3f\n\t" /* strings are equal */ - "2:\tsubb %1@-,%2\n\t" /* *cs - *ct */ - "3:" - : "=a" (cs), "=a" (ct), "=d" (__res) - : "0" (cs), "1" (ct)); - - return __res; -} - -#define __HAVE_ARCH_STRNCMP -static inline int strncmp(const char * cs,const char * ct,size_t count) -{ - char __res; - - if (!count) - return 0; - __asm__ - ("1:\tmovb %0@+,%3\n\t" /* get *cs */ - "cmpb %1@+,%3\n\t" /* compare a byte */ - "jne 3f\n\t" /* not equal, break out */ - "tstb %3\n\t" /* at end of cs? */ - "jeq 4f\n\t" /* yes, all done */ - "subql #1,%2\n\t" /* no, adjust count */ - "jne 1b\n\t" /* more to do, keep going */ - "2:\tmoveq #0,%3\n\t" /* strings are equal */ - "jra 4f\n\t" - "3:\tsubb %1@-,%3\n\t" /* *cs - *ct */ - "4:" - : "=a" (cs), "=a" (ct), "=d" (count), "=d" (__res) - : "0" (cs), "1" (ct), "2" (count)); - return __res; -} - -#endif /* CONFIG_COLDFIRE */ - -#define __HAVE_ARCH_MEMSET -extern void * memset(void * s, int c, size_t count); - -#define __HAVE_ARCH_MEMCPY -extern void * memcpy(void *d, const void *s, size_t count); - -#else /* KERNEL */ - -/* - * let user libraries deal with these, - * IMHO the kernel has no place defining these functions for user apps - */ - -#define __HAVE_ARCH_STRCPY 1 -#define __HAVE_ARCH_STRNCPY 1 -#define __HAVE_ARCH_STRCAT 1 -#define __HAVE_ARCH_STRNCAT 1 -#define __HAVE_ARCH_STRCMP 1 -#define __HAVE_ARCH_STRNCMP 1 -#define __HAVE_ARCH_STRNICMP 1 -#define __HAVE_ARCH_STRCHR 1 -#define __HAVE_ARCH_STRRCHR 1 -#define __HAVE_ARCH_STRSTR 1 -#define __HAVE_ARCH_STRLEN 1 -#define __HAVE_ARCH_STRNLEN 1 -#define __HAVE_ARCH_MEMSET 1 -#define __HAVE_ARCH_MEMCPY 1 -#define __HAVE_ARCH_MEMMOVE 1 -#define __HAVE_ARCH_MEMSCAN 1 -#define __HAVE_ARCH_MEMCMP 1 -#define __HAVE_ARCH_MEMCHR 1 -#define __HAVE_ARCH_STRTOK 1 - -#endif /* KERNEL */ - -#endif /* _M68K_STRING_H_ */ diff --git a/arch/m68knommu/include/asm/swab.h b/arch/m68knommu/include/asm/swab.h deleted file mode 100644 index e582257db30..00000000000 --- a/arch/m68knommu/include/asm/swab.h +++ /dev/null @@ -1,24 +0,0 @@ -#ifndef _M68KNOMMU_SWAB_H -#define _M68KNOMMU_SWAB_H - -#include <linux/types.h> - -#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__) -# define __SWAB_64_THRU_32__ -#endif - -#if defined (__mcfisaaplus__) || defined (__mcfisac__) -static inline __attribute_const__ __u32 __arch_swab32(__u32 val) -{ - asm( - "byterev %0" - : "=d" (val) - : "0" (val) - ); - return val; -} - -#define __arch_swab32 __arch_swab32 -#endif - -#endif /* _M68KNOMMU_SWAB_H */ diff --git a/arch/m68knommu/include/asm/system.h b/arch/m68knommu/include/asm/system.h deleted file mode 100644 index 40f49de6982..00000000000 --- a/arch/m68knommu/include/asm/system.h +++ /dev/null @@ -1,324 +0,0 @@ -#ifndef _M68KNOMMU_SYSTEM_H -#define _M68KNOMMU_SYSTEM_H - -#include <linux/linkage.h> -#include <asm/segment.h> -#include <asm/entry.h> - -/* - * switch_to(n) should switch tasks to task ptr, first checking that - * ptr isn't the current task, in which case it does nothing. This - * also clears the TS-flag if the task we switched to has used the - * math co-processor latest. - */ -/* - * switch_to() saves the extra registers, that are not saved - * automatically by SAVE_SWITCH_STACK in resume(), ie. d0-d5 and - * a0-a1. Some of these are used by schedule() and its predecessors - * and so we might get see unexpected behaviors when a task returns - * with unexpected register values. - * - * syscall stores these registers itself and none of them are used - * by syscall after the function in the syscall has been called. - * - * Beware that resume now expects *next to be in d1 and the offset of - * tss to be in a1. This saves a few instructions as we no longer have - * to push them onto the stack and read them back right after. - * - * 02/17/96 - Jes Sorensen (jds@kom.auc.dk) - * - * Changed 96/09/19 by Andreas Schwab - * pass prev in a0, next in a1, offset of tss in d1, and whether - * the mm structures are shared in d2 (to avoid atc flushing). - */ -asmlinkage void resume(void); -#define switch_to(prev,next,last) \ -{ \ - void *_last; \ - __asm__ __volatile__( \ - "movel %1, %%a0\n\t" \ - "movel %2, %%a1\n\t" \ - "jbsr resume\n\t" \ - "movel %%d1, %0\n\t" \ - : "=d" (_last) \ - : "d" (prev), "d" (next) \ - : "cc", "d0", "d1", "d2", "d3", "d4", "d5", "a0", "a1"); \ - (last) = _last; \ -} - -#ifdef CONFIG_COLDFIRE -#define local_irq_enable() __asm__ __volatile__ ( \ - "move %/sr,%%d0\n\t" \ - "andi.l #0xf8ff,%%d0\n\t" \ - "move %%d0,%/sr\n" \ - : /* no outputs */ \ - : \ - : "cc", "%d0", "memory") -#define local_irq_disable() __asm__ __volatile__ ( \ - "move %/sr,%%d0\n\t" \ - "ori.l #0x0700,%%d0\n\t" \ - "move %%d0,%/sr\n" \ - : /* no outputs */ \ - : \ - : "cc", "%d0", "memory") -/* For spinlocks etc */ -#define local_irq_save(x) __asm__ __volatile__ ( \ - "movew %%sr,%0\n\t" \ - "movew #0x0700,%%d0\n\t" \ - "or.l %0,%%d0\n\t" \ - "movew %%d0,%/sr" \ - : "=d" (x) \ - : \ - : "cc", "%d0", "memory") -#else - -/* portable version */ /* FIXME - see entry.h*/ -#define ALLOWINT 0xf8ff - -#define local_irq_enable() asm volatile ("andiw %0,%%sr": : "i" (ALLOWINT) : "memory") -#define local_irq_disable() asm volatile ("oriw #0x0700,%%sr": : : "memory") -#endif - -#define local_save_flags(x) asm volatile ("movew %%sr,%0":"=d" (x) : : "memory") -#define local_irq_restore(x) asm volatile ("movew %0,%%sr": :"d" (x) : "memory") - -/* For spinlocks etc */ -#ifndef local_irq_save -#define local_irq_save(x) do { local_save_flags(x); local_irq_disable(); } while (0) -#endif - -#define irqs_disabled() \ -({ \ - unsigned long flags; \ - local_save_flags(flags); \ - ((flags & 0x0700) == 0x0700); \ -}) - -#define iret() __asm__ __volatile__ ("rte": : :"memory", "sp", "cc") - -/* - * Force strict CPU ordering. - * Not really required on m68k... - */ -#define nop() asm volatile ("nop"::) -#define mb() asm volatile ("" : : :"memory") -#define rmb() asm volatile ("" : : :"memory") -#define wmb() asm volatile ("" : : :"memory") -#define set_mb(var, value) ({ (var) = (value); wmb(); }) - -#ifdef CONFIG_SMP -#define smp_mb() mb() -#define smp_rmb() rmb() -#define smp_wmb() wmb() -#define smp_read_barrier_depends() read_barrier_depends() -#else -#define smp_mb() barrier() -#define smp_rmb() barrier() -#define smp_wmb() barrier() -#define smp_read_barrier_depends() do { } while(0) -#endif - -#define read_barrier_depends() ((void)0) - -#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) - -struct __xchg_dummy { unsigned long a[100]; }; -#define __xg(x) ((volatile struct __xchg_dummy *)(x)) - -#ifndef CONFIG_RMW_INSNS -static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size) -{ - unsigned long tmp, flags; - - local_irq_save(flags); - - switch (size) { - case 1: - __asm__ __volatile__ - ("moveb %2,%0\n\t" - "moveb %1,%2" - : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory"); - break; - case 2: - __asm__ __volatile__ - ("movew %2,%0\n\t" - "movew %1,%2" - : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory"); - break; - case 4: - __asm__ __volatile__ - ("movel %2,%0\n\t" - "movel %1,%2" - : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory"); - break; - } - local_irq_restore(flags); - return tmp; -} -#else -static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size) -{ - switch (size) { - case 1: - __asm__ __volatile__ - ("moveb %2,%0\n\t" - "1:\n\t" - "casb %0,%1,%2\n\t" - "jne 1b" - : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory"); - break; - case 2: - __asm__ __volatile__ - ("movew %2,%0\n\t" - "1:\n\t" - "casw %0,%1,%2\n\t" - "jne 1b" - : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory"); - break; - case 4: - __asm__ __volatile__ - ("movel %2,%0\n\t" - "1:\n\t" - "casl %0,%1,%2\n\t" - "jne 1b" - : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory"); - break; - } - return x; -} -#endif - -#include <asm-generic/cmpxchg-local.h> - -/* - * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make - * them available. - */ -#define cmpxchg_local(ptr, o, n) \ - ((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\ - (unsigned long)(n), sizeof(*(ptr)))) -#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) - -#ifndef CONFIG_SMP -#include <asm-generic/cmpxchg.h> -#endif - -#if defined( CONFIG_M68328 ) || defined( CONFIG_M68EZ328 ) || \ - defined (CONFIG_M68360) || defined( CONFIG_M68VZ328 ) -#define HARD_RESET_NOW() ({ \ - local_irq_disable(); \ - asm(" \ - moveal #0x10c00000, %a0; \ - moveb #0, 0xFFFFF300; \ - moveal 0(%a0), %sp; \ - moveal 4(%a0), %a0; \ - jmp (%a0); \ - "); \ -}) -#endif - -#ifdef CONFIG_COLDFIRE -#if defined(CONFIG_M5272) && defined(CONFIG_NETtel) -/* - * Need to account for broken early mask of 5272 silicon. So don't - * jump through the original start address. Jump strait into the - * known start of the FLASH code. - */ -#define HARD_RESET_NOW() ({ \ - asm(" \ - movew #0x2700, %sr; \ - jmp 0xf0000400; \ - "); \ -}) -#elif defined(CONFIG_NETtel) || defined(CONFIG_eLIA) || \ - defined(CONFIG_SECUREEDGEMP3) || defined(CONFIG_CLEOPATRA) -#define HARD_RESET_NOW() ({ \ - asm(" \ - movew #0x2700, %sr; \ - moveal #0x10000044, %a0; \ - movel #0xffffffff, (%a0); \ - moveal #0x10000001, %a0; \ - moveb #0x00, (%a0); \ - moveal #0xf0000004, %a0; \ - moveal (%a0), %a0; \ - jmp (%a0); \ - "); \ -}) -#elif defined(CONFIG_M5272) -/* - * Retrieve the boot address in flash using CSBR0 and CSOR0 - * find the reset vector at flash_address + 4 (e.g. 0x400) - * remap it in the flash's current location (e.g. 0xf0000400) - * and jump there. - */ -#define HARD_RESET_NOW() ({ \ - asm(" \ - movew #0x2700, %%sr; \ - move.l %0+0x40,%%d0; \ - and.l %0+0x44,%%d0; \ - andi.l #0xfffff000,%%d0; \ - mov.l %%d0,%%a0; \ - or.l 4(%%a0),%%d0; \ - mov.l %%d0,%%a0; \ - jmp (%%a0);" \ - : /* No output */ \ - : "o" (*(char *)MCF_MBAR) ); \ -}) -#elif defined(CONFIG_M528x) -/* - * The MCF528x has a bit (SOFTRST) in memory (Reset Control Register RCR), - * that when set, resets the MCF528x. - */ -#define HARD_RESET_NOW() \ -({ \ - unsigned char volatile *reset; \ - asm("move.w #0x2700, %sr"); \ - reset = ((volatile unsigned char *)(MCF_IPSBAR + 0x110000)); \ - while(1) \ - *reset |= (0x01 << 7);\ -}) -#elif defined(CONFIG_M523x) -#define HARD_RESET_NOW() ({ \ - asm(" \ - movew #0x2700, %sr; \ - movel #0x01000000, %sp; \ - moveal #0x40110000, %a0; \ - moveb #0x80, (%a0); \ - "); \ -}) -#elif defined(CONFIG_M520x) - /* - * The MCF5208 has a bit (SOFTRST) in memory (Reset Control Register - * RCR), that when set, resets the MCF5208. - */ -#define HARD_RESET_NOW() \ -({ \ - unsigned char volatile *reset; \ - asm("move.w #0x2700, %sr"); \ - reset = ((volatile unsigned char *)(MCF_IPSBAR + 0xA0000)); \ - while(1) \ - *reset |= 0x80; \ -}) -#else -#define HARD_RESET_NOW() ({ \ - asm(" \ - movew #0x2700, %sr; \ - moveal #0x4, %a0; \ - moveal (%a0), %a0; \ - jmp (%a0); \ - "); \ -}) -#endif -#endif -#define arch_align_stack(x) (x) - - -static inline int irqs_disabled_flags(unsigned long flags) -{ - if (flags & 0x0700) - return 0; - else - return 1; -} - -#endif /* _M68KNOMMU_SYSTEM_H */ diff --git a/arch/m68knommu/include/asm/termbits.h b/arch/m68knommu/include/asm/termbits.h deleted file mode 100644 index 05dd6bc2728..00000000000 --- a/arch/m68knommu/include/asm/termbits.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/termbits.h> diff --git a/arch/m68knommu/include/asm/termios.h b/arch/m68knommu/include/asm/termios.h deleted file mode 100644 index e7337881a98..00000000000 --- a/arch/m68knommu/include/asm/termios.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/termios.h> diff --git a/arch/m68knommu/include/asm/thread_info.h b/arch/m68knommu/include/asm/thread_info.h deleted file mode 100644 index 82529f424ea..00000000000 --- a/arch/m68knommu/include/asm/thread_info.h +++ /dev/null @@ -1,100 +0,0 @@ -/* thread_info.h: m68knommu low-level thread information - * adapted from the i386 and PPC versions by Greg Ungerer (gerg@snapgear.com) - * - * Copyright (C) 2002 David Howells (dhowells@redhat.com) - * - Incorporating suggestions made by Linus Torvalds and Dave Miller - */ - -#ifndef _ASM_THREAD_INFO_H -#define _ASM_THREAD_INFO_H - -#include <asm/page.h> - -#ifdef __KERNEL__ - -#ifndef __ASSEMBLY__ - -/* - * Size of kernel stack for each process. This must be a power of 2... - */ -#ifdef CONFIG_4KSTACKS -#define THREAD_SIZE_ORDER (0) -#else -#define THREAD_SIZE_ORDER (1) -#endif - -/* - * for asm files, THREAD_SIZE is now generated by asm-offsets.c - */ -#define THREAD_SIZE (PAGE_SIZE<<THREAD_SIZE_ORDER) - -/* - * low level task data. - */ -struct thread_info { - struct task_struct *task; /* main task structure */ - struct exec_domain *exec_domain; /* execution domain */ - unsigned long flags; /* low level flags */ - int cpu; /* cpu we're on */ - int preempt_count; /* 0 => preemptable, <0 => BUG */ - struct restart_block restart_block; -}; - -/* - * macros/functions for gaining access to the thread information structure - */ -#define INIT_THREAD_INFO(tsk) \ -{ \ - .task = &tsk, \ - .exec_domain = &default_exec_domain, \ - .flags = 0, \ - .cpu = 0, \ - .restart_block = { \ - .fn = do_no_restart_syscall, \ - }, \ -} - -#define init_thread_info (init_thread_union.thread_info) -#define init_stack (init_thread_union.stack) - - -/* how to get the thread information struct from C */ -static inline struct thread_info *current_thread_info(void) -{ - struct thread_info *ti; - __asm__( - "move.l %%sp, %0 \n\t" - "and.l %1, %0" - : "=&d"(ti) - : "di" (~(THREAD_SIZE-1)) - ); - return ti; -} - -#endif /* __ASSEMBLY__ */ - -#define PREEMPT_ACTIVE 0x4000000 - -/* - * thread information flag bit numbers - */ -#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ -#define TIF_SIGPENDING 1 /* signal pending */ -#define TIF_NEED_RESCHED 2 /* rescheduling necessary */ -#define TIF_POLLING_NRFLAG 3 /* true if poll_idle() is polling - TIF_NEED_RESCHED */ -#define TIF_MEMDIE 4 -#define TIF_FREEZE 16 /* is freezing for suspend */ - -/* as above, but as bit values */ -#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE) -#define _TIF_SIGPENDING (1<<TIF_SIGPENDING) -#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED) -#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG) -#define _TIF_FREEZE (1<<TIF_FREEZE) - -#define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */ - -#endif /* __KERNEL__ */ - -#endif /* _ASM_THREAD_INFO_H */ diff --git a/arch/m68knommu/include/asm/timex.h b/arch/m68knommu/include/asm/timex.h deleted file mode 100644 index 109050f3fe9..00000000000 --- a/arch/m68knommu/include/asm/timex.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * linux/include/asm-m68knommu/timex.h - * - * m68knommu architecture timex specifications - */ -#ifndef _ASM_M68KNOMMU_TIMEX_H -#define _ASM_M68KNOMMU_TIMEX_H - -#ifdef CONFIG_COLDFIRE -#include <asm/coldfire.h> -#define CLOCK_TICK_RATE MCF_CLK -#else -#define CLOCK_TICK_RATE 1193180 /* Underlying HZ */ -#endif - -typedef unsigned long cycles_t; - -static inline cycles_t get_cycles(void) -{ - return 0; -} - -#endif diff --git a/arch/m68knommu/include/asm/tlb.h b/arch/m68knommu/include/asm/tlb.h deleted file mode 100644 index 77a7c51ca29..00000000000 --- a/arch/m68knommu/include/asm/tlb.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/tlb.h> diff --git a/arch/m68knommu/include/asm/tlbflush.h b/arch/m68knommu/include/asm/tlbflush.h deleted file mode 100644 index a470cfb803e..00000000000 --- a/arch/m68knommu/include/asm/tlbflush.h +++ /dev/null @@ -1,55 +0,0 @@ -#ifndef _M68KNOMMU_TLBFLUSH_H -#define _M68KNOMMU_TLBFLUSH_H - -/* - * Copyright (C) 2000 Lineo, David McCullough <davidm@uclinux.org> - * Copyright (C) 2000-2002, Greg Ungerer <gerg@snapgear.com> - */ - -#include <asm/setup.h> - -/* - * flush all user-space atc entries. - */ -static inline void __flush_tlb(void) -{ - BUG(); -} - -static inline void __flush_tlb_one(unsigned long addr) -{ - BUG(); -} - -#define flush_tlb() __flush_tlb() - -/* - * flush all atc entries (both kernel and user-space entries). - */ -static inline void flush_tlb_all(void) -{ - BUG(); -} - -static inline void flush_tlb_mm(struct mm_struct *mm) -{ - BUG(); -} - -static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr) -{ - BUG(); -} - -static inline void flush_tlb_range(struct mm_struct *mm, - unsigned long start, unsigned long end) -{ - BUG(); -} - -static inline void flush_tlb_kernel_page(unsigned long addr) -{ - BUG(); -} - -#endif /* _M68KNOMMU_TLBFLUSH_H */ diff --git a/arch/m68knommu/include/asm/topology.h b/arch/m68knommu/include/asm/topology.h deleted file mode 100644 index ca173e9f26f..00000000000 --- a/arch/m68knommu/include/asm/topology.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_M68K_TOPOLOGY_H -#define _ASM_M68K_TOPOLOGY_H - -#include <asm-generic/topology.h> - -#endif /* _ASM_M68K_TOPOLOGY_H */ diff --git a/arch/m68knommu/include/asm/traps.h b/arch/m68knommu/include/asm/traps.h deleted file mode 100644 index d0671e5f8e2..00000000000 --- a/arch/m68knommu/include/asm/traps.h +++ /dev/null @@ -1,154 +0,0 @@ -/* - * linux/include/asm/traps.h - * - * Copyright (C) 1993 Hamish Macdonald - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive - * for more details. - */ - -#ifndef _M68KNOMMU_TRAPS_H -#define _M68KNOMMU_TRAPS_H - -#ifndef __ASSEMBLY__ - -typedef void (*e_vector)(void); - -extern e_vector vectors[]; -extern void init_vectors(void); -extern void enable_vector(unsigned int irq); -extern void disable_vector(unsigned int irq); -extern void ack_vector(unsigned int irq); - -#endif - -#define VEC_BUSERR (2) -#define VEC_ADDRERR (3) -#define VEC_ILLEGAL (4) -#define VEC_ZERODIV (5) -#define VEC_CHK (6) -#define VEC_TRAP (7) -#define VEC_PRIV (8) -#define VEC_TRACE (9) -#define VEC_LINE10 (10) -#define VEC_LINE11 (11) -#define VEC_RESV1 (12) -#define VEC_COPROC (13) -#define VEC_FORMAT (14) -#define VEC_UNINT (15) -#define VEC_SPUR (24) -#define VEC_INT1 (25) -#define VEC_INT2 (26) -#define VEC_INT3 (27) -#define VEC_INT4 (28) -#define VEC_INT5 (29) -#define VEC_INT6 (30) -#define VEC_INT7 (31) -#define VEC_SYS (32) -#define VEC_TRAP1 (33) -#define VEC_TRAP2 (34) -#define VEC_TRAP3 (35) -#define VEC_TRAP4 (36) -#define VEC_TRAP5 (37) -#define VEC_TRAP6 (38) -#define VEC_TRAP7 (39) -#define VEC_TRAP8 (40) -#define VEC_TRAP9 (41) -#define VEC_TRAP10 (42) -#define VEC_TRAP11 (43) -#define VEC_TRAP12 (44) -#define VEC_TRAP13 (45) -#define VEC_TRAP14 (46) -#define VEC_TRAP15 (47) -#define VEC_FPBRUC (48) -#define VEC_FPIR (49) -#define VEC_FPDIVZ (50) -#define VEC_FPUNDER (51) -#define VEC_FPOE (52) -#define VEC_FPOVER (53) -#define VEC_FPNAN (54) -#define VEC_FPUNSUP (55) -#define VEC_UNIMPEA (60) -#define VEC_UNIMPII (61) -#define VEC_USER (64) - -#define VECOFF(vec) ((vec)<<2) - -#ifndef __ASSEMBLY__ - -/* Status register bits */ -#define PS_T (0x8000) -#define PS_S (0x2000) -#define PS_M (0x1000) -#define PS_C (0x0001) - -/* structure for stack frames */ - -struct frame { - struct pt_regs ptregs; - union { - struct { - unsigned long iaddr; /* instruction address */ - } fmt2; - struct { - unsigned long effaddr; /* effective address */ - } fmt3; - struct { - unsigned long effaddr; /* effective address */ - unsigned long pc; /* pc of faulted instr */ - } fmt4; - struct { - unsigned long effaddr; /* effective address */ - unsigned short ssw; /* special status word */ - unsigned short wb3s; /* write back 3 status */ - unsigned short wb2s; /* write back 2 status */ - unsigned short wb1s; /* write back 1 status */ - unsigned long faddr; /* fault address */ - unsigned long wb3a; /* write back 3 address */ - unsigned long wb3d; /* write back 3 data */ - unsigned long wb2a; /* write back 2 address */ - unsigned long wb2d; /* write back 2 data */ - unsigned long wb1a; /* write back 1 address */ - unsigned long wb1dpd0; /* write back 1 data/push data 0*/ - unsigned long pd1; /* push data 1*/ - unsigned long pd2; /* push data 2*/ - unsigned long pd3; /* push data 3*/ - } fmt7; - struct { - unsigned long iaddr; /* instruction address */ - unsigned short int1[4]; /* internal registers */ - } fmt9; - struct { - unsigned short int1; - unsigned short ssw; /* special status word */ - unsigned short isc; /* instruction stage c */ - unsigned short isb; /* instruction stage b */ - unsigned long daddr; /* data cycle fault address */ - unsigned short int2[2]; - unsigned long dobuf; /* data cycle output buffer */ - unsigned short int3[2]; - } fmta; - struct { - unsigned short int1; - unsigned short ssw; /* special status word */ - unsigned short isc; /* instruction stage c */ - unsigned short isb; /* instruction stage b */ - unsigned long daddr; /* data cycle fault address */ - unsigned short int2[2]; - unsigned long dobuf; /* data cycle output buffer */ - unsigned short int3[4]; - unsigned long baddr; /* stage B address */ - unsigned short int4[2]; - unsigned long dibuf; /* data cycle input buffer */ - unsigned short int5[3]; - unsigned ver : 4; /* stack frame version # */ - unsigned int6:12; - unsigned short int7[18]; - } fmtb; - } un; -}; - -#endif /* __ASSEMBLY__ */ - -#endif /* _M68KNOMMU_TRAPS_H */ diff --git a/arch/m68knommu/include/asm/types.h b/arch/m68knommu/include/asm/types.h deleted file mode 100644 index 031238c2d18..00000000000 --- a/arch/m68knommu/include/asm/types.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/types.h> diff --git a/arch/m68knommu/include/asm/uaccess.h b/arch/m68knommu/include/asm/uaccess.h deleted file mode 100644 index 68bbe9b312f..00000000000 --- a/arch/m68knommu/include/asm/uaccess.h +++ /dev/null @@ -1,181 +0,0 @@ -#ifndef __M68KNOMMU_UACCESS_H -#define __M68KNOMMU_UACCESS_H - -/* - * User space memory access functions - */ -#include <linux/sched.h> -#include <linux/mm.h> -#include <linux/string.h> - -#include <asm/segment.h> - -#define VERIFY_READ 0 -#define VERIFY_WRITE 1 - -#define access_ok(type,addr,size) _access_ok((unsigned long)(addr),(size)) - -/* - * It is not enough to just have access_ok check for a real RAM address. - * This would disallow the case of code/ro-data running XIP in flash/rom. - * Ideally we would check the possible flash ranges too, but that is - * currently not so easy. - */ -static inline int _access_ok(unsigned long addr, unsigned long size) -{ - return 1; -} - -/* - * The exception table consists of pairs of addresses: the first is the - * address of an instruction that is allowed to fault, and the second is - * the address at which the program should continue. No registers are - * modified, so it is entirely up to the continuation code to figure out - * what to do. - * - * All the routines below use bits of fixup code that are out of line - * with the main instruction path. This means when everything is well, - * we don't even have to jump over them. Further, they do not intrude - * on our cache or tlb entries. - */ - -struct exception_table_entry -{ - unsigned long insn, fixup; -}; - -/* Returns 0 if exception not found and fixup otherwise. */ -extern unsigned long search_exception_table(unsigned long); - - -/* - * These are the main single-value transfer routines. They automatically - * use the right size if we just have the right pointer type. - */ - -#define put_user(x, ptr) \ -({ \ - int __pu_err = 0; \ - typeof(*(ptr)) __pu_val = (x); \ - switch (sizeof (*(ptr))) { \ - case 1: \ - __put_user_asm(__pu_err, __pu_val, ptr, b); \ - break; \ - case 2: \ - __put_user_asm(__pu_err, __pu_val, ptr, w); \ - break; \ - case 4: \ - __put_user_asm(__pu_err, __pu_val, ptr, l); \ - break; \ - case 8: \ - memcpy(ptr, &__pu_val, sizeof (*(ptr))); \ - break; \ - default: \ - __pu_err = __put_user_bad(); \ - break; \ - } \ - __pu_err; \ -}) -#define __put_user(x, ptr) put_user(x, ptr) - -extern int __put_user_bad(void); - -/* - * Tell gcc we read from memory instead of writing: this is because - * we do not write to any memory gcc knows about, so there are no - * aliasing issues. - */ - -#define __ptr(x) ((unsigned long *)(x)) - -#define __put_user_asm(err,x,ptr,bwl) \ - __asm__ ("move" #bwl " %0,%1" \ - : /* no outputs */ \ - :"d" (x),"m" (*__ptr(ptr)) : "memory") - -#define get_user(x, ptr) \ -({ \ - int __gu_err = 0; \ - typeof(x) __gu_val = 0; \ - switch (sizeof(*(ptr))) { \ - case 1: \ - __get_user_asm(__gu_err, __gu_val, ptr, b, "=d"); \ - break; \ - case 2: \ - __get_user_asm(__gu_err, __gu_val, ptr, w, "=r"); \ - break; \ - case 4: \ - __get_user_asm(__gu_err, __gu_val, ptr, l, "=r"); \ - break; \ - case 8: \ - memcpy((void *) &__gu_val, ptr, sizeof (*(ptr))); \ - break; \ - default: \ - __gu_val = 0; \ - __gu_err = __get_user_bad(); \ - break; \ - } \ - (x) = (typeof(*(ptr))) __gu_val; \ - __gu_err; \ -}) -#define __get_user(x, ptr) get_user(x, ptr) - -extern int __get_user_bad(void); - -#define __get_user_asm(err,x,ptr,bwl,reg) \ - __asm__ ("move" #bwl " %1,%0" \ - : "=d" (x) \ - : "m" (*__ptr(ptr))) - -#define copy_from_user(to, from, n) (memcpy(to, from, n), 0) -#define copy_to_user(to, from, n) (memcpy(to, from, n), 0) - -#define __copy_from_user(to, from, n) copy_from_user(to, from, n) -#define __copy_to_user(to, from, n) copy_to_user(to, from, n) -#define __copy_to_user_inatomic __copy_to_user -#define __copy_from_user_inatomic __copy_from_user - -#define copy_to_user_ret(to,from,n,retval) ({ if (copy_to_user(to,from,n)) return retval; }) - -#define copy_from_user_ret(to,from,n,retval) ({ if (copy_from_user(to,from,n)) return retval; }) - -/* - * Copy a null terminated string from userspace. - */ - -static inline long -strncpy_from_user(char *dst, const char *src, long count) -{ - char *tmp; - strncpy(dst, src, count); - for (tmp = dst; *tmp && count > 0; tmp++, count--) - ; - return(tmp - dst); /* DAVIDM should we count a NUL ? check getname */ -} - -/* - * Return the size of a string (including the ending 0) - * - * Return 0 on exception, a value greater than N if too long - */ -static inline long strnlen_user(const char *src, long n) -{ - return(strlen(src) + 1); /* DAVIDM make safer */ -} - -#define strlen_user(str) strnlen_user(str, 32767) - -/* - * Zero Userspace - */ - -static inline unsigned long -__clear_user(void *to, unsigned long n) -{ - memset(to, 0, n); - return 0; -} - -#define clear_user(to,n) __clear_user(to,n) - -#endif /* _M68KNOMMU_UACCESS_H */ diff --git a/arch/m68knommu/include/asm/ucontext.h b/arch/m68knommu/include/asm/ucontext.h deleted file mode 100644 index 713a27f901c..00000000000 --- a/arch/m68knommu/include/asm/ucontext.h +++ /dev/null @@ -1,32 +0,0 @@ -#ifndef _M68KNOMMU_UCONTEXT_H -#define _M68KNOMMU_UCONTEXT_H - -typedef int greg_t; -#define NGREG 18 -typedef greg_t gregset_t[NGREG]; - -typedef struct fpregset { - int f_pcr; - int f_psr; - int f_fpiaddr; - int f_fpregs[8][3]; -} fpregset_t; - -struct mcontext { - int version; - gregset_t gregs; - fpregset_t fpregs; -}; - -#define MCONTEXT_VERSION 2 - -struct ucontext { - unsigned long uc_flags; - struct ucontext *uc_link; - stack_t uc_stack; - struct mcontext uc_mcontext; - unsigned long uc_filler[80]; - sigset_t uc_sigmask; /* mask last for extensibility */ -}; - -#endif diff --git a/arch/m68knommu/include/asm/unaligned.h b/arch/m68knommu/include/asm/unaligned.h deleted file mode 100644 index eb1ea4cb9a5..00000000000 --- a/arch/m68knommu/include/asm/unaligned.h +++ /dev/null @@ -1,25 +0,0 @@ -#ifndef _ASM_M68KNOMMU_UNALIGNED_H -#define _ASM_M68KNOMMU_UNALIGNED_H - - -#ifdef CONFIG_COLDFIRE -#include <linux/unaligned/be_struct.h> -#include <linux/unaligned/le_byteshift.h> -#include <linux/unaligned/generic.h> - -#define get_unaligned __get_unaligned_be -#define put_unaligned __put_unaligned_be - -#else -/* - * The m68k can do unaligned accesses itself. - */ -#include <linux/unaligned/access_ok.h> -#include <linux/unaligned/generic.h> - -#define get_unaligned __get_unaligned_be -#define put_unaligned __put_unaligned_be - -#endif - -#endif /* _ASM_M68KNOMMU_UNALIGNED_H */ diff --git a/arch/m68knommu/include/asm/unistd.h b/arch/m68knommu/include/asm/unistd.h deleted file mode 100644 index b034a2f7b44..00000000000 --- a/arch/m68knommu/include/asm/unistd.h +++ /dev/null @@ -1,372 +0,0 @@ -#ifndef _ASM_M68K_UNISTD_H_ -#define _ASM_M68K_UNISTD_H_ - -/* - * This file contains the system call numbers. - */ - -#define __NR_restart_syscall 0 -#define __NR_exit 1 -#define __NR_fork 2 -#define __NR_read 3 -#define __NR_write 4 -#define __NR_open 5 -#define __NR_close 6 -#define __NR_waitpid 7 -#define __NR_creat 8 -#define __NR_link 9 -#define __NR_unlink 10 -#define __NR_execve 11 -#define __NR_chdir 12 -#define __NR_time 13 -#define __NR_mknod 14 -#define __NR_chmod 15 -#define __NR_chown 16 -#define __NR_break 17 -#define __NR_oldstat 18 -#define __NR_lseek 19 -#define __NR_getpid 20 -#define __NR_mount 21 -#define __NR_umount 22 -#define __NR_setuid 23 -#define __NR_getuid 24 -#define __NR_stime 25 -#define __NR_ptrace 26 -#define __NR_alarm 27 -#define __NR_oldfstat 28 -#define __NR_pause 29 -#define __NR_utime 30 -#define __NR_stty 31 -#define __NR_gtty 32 -#define __NR_access 33 -#define __NR_nice 34 -#define __NR_ftime 35 -#define __NR_sync 36 -#define __NR_kill 37 -#define __NR_rename 38 -#define __NR_mkdir 39 -#define __NR_rmdir 40 -#define __NR_dup 41 -#define __NR_pipe 42 -#define __NR_times 43 -#define __NR_prof 44 -#define __NR_brk 45 -#define __NR_setgid 46 -#define __NR_getgid 47 -#define __NR_signal 48 -#define __NR_geteuid 49 -#define __NR_getegid 50 -#define __NR_acct 51 -#define __NR_umount2 52 -#define __NR_lock 53 -#define __NR_ioctl 54 -#define __NR_fcntl 55 -#define __NR_mpx 56 -#define __NR_setpgid 57 -#define __NR_ulimit 58 -#define __NR_oldolduname 59 -#define __NR_umask 60 -#define __NR_chroot 61 -#define __NR_ustat 62 -#define __NR_dup2 63 -#define __NR_getppid 64 -#define __NR_getpgrp 65 -#define __NR_setsid 66 -#define __NR_sigaction 67 -#define __NR_sgetmask 68 -#define __NR_ssetmask 69 -#define __NR_setreuid 70 -#define __NR_setregid 71 -#define __NR_sigsuspend 72 -#define __NR_sigpending 73 -#define __NR_sethostname 74 -#define __NR_setrlimit 75 -#define __NR_getrlimit 76 -#define __NR_getrusage 77 -#define __NR_gettimeofday 78 -#define __NR_settimeofday 79 -#define __NR_getgroups 80 -#define __NR_setgroups 81 -#define __NR_select 82 -#define __NR_symlink 83 -#define __NR_oldlstat 84 -#define __NR_readlink 85 -#define __NR_uselib 86 -#define __NR_swapon 87 -#define __NR_reboot 88 -#define __NR_readdir 89 -#define __NR_mmap 90 -#define __NR_munmap 91 -#define __NR_truncate 92 -#define __NR_ftruncate 93 -#define __NR_fchmod 94 -#define __NR_fchown 95 -#define __NR_getpriority 96 -#define __NR_setpriority 97 -#define __NR_profil 98 -#define __NR_statfs 99 -#define __NR_fstatfs 100 -#define __NR_ioperm 101 -#define __NR_socketcall 102 -#define __NR_syslog 103 -#define __NR_setitimer 104 -#define __NR_getitimer 105 -#define __NR_stat 106 -#define __NR_lstat 107 -#define __NR_fstat 108 -#define __NR_olduname 109 -#define __NR_iopl /* 110 */ not supported -#define __NR_vhangup 111 -#define __NR_idle /* 112 */ Obsolete -#define __NR_vm86 /* 113 */ not supported -#define __NR_wait4 114 -#define __NR_swapoff 115 -#define __NR_sysinfo 116 -#define __NR_ipc 117 -#define __NR_fsync 118 -#define __NR_sigreturn 119 -#define __NR_clone 120 -#define __NR_setdomainname 121 -#define __NR_uname 122 -#define __NR_cacheflush 123 -#define __NR_adjtimex 124 -#define __NR_mprotect 125 -#define __NR_sigprocmask 126 -#define __NR_create_module 127 -#define __NR_init_module 128 -#define __NR_delete_module 129 -#define __NR_get_kernel_syms 130 -#define __NR_quotactl 131 -#define __NR_getpgid 132 -#define __NR_fchdir 133 -#define __NR_bdflush 134 -#define __NR_sysfs 135 -#define __NR_personality 136 -#define __NR_afs_syscall 137 /* Syscall for Andrew File System */ -#define __NR_setfsuid 138 -#define __NR_setfsgid 139 -#define __NR__llseek 140 -#define __NR_getdents 141 -#define __NR__newselect 142 -#define __NR_flock 143 -#define __NR_msync 144 -#define __NR_readv 145 -#define __NR_writev 146 -#define __NR_getsid 147 -#define __NR_fdatasync 148 -#define __NR__sysctl 149 -#define __NR_mlock 150 -#define __NR_munlock 151 -#define __NR_mlockall 152 -#define __NR_munlockall 153 -#define __NR_sched_setparam 154 -#define __NR_sched_getparam 155 -#define __NR_sched_setscheduler 156 -#define __NR_sched_getscheduler 157 -#define __NR_sched_yield 158 -#define __NR_sched_get_priority_max 159 -#define __NR_sched_get_priority_min 160 -#define __NR_sched_rr_get_interval 161 -#define __NR_nanosleep 162 -#define __NR_mremap 163 -#define __NR_setresuid 164 -#define __NR_getresuid 165 -#define __NR_getpagesize 166 -#define __NR_query_module 167 -#define __NR_poll 168 -#define __NR_nfsservctl 169 -#define __NR_setresgid 170 -#define __NR_getresgid 171 -#define __NR_prctl 172 -#define __NR_rt_sigreturn 173 -#define __NR_rt_sigaction 174 -#define __NR_rt_sigprocmask 175 -#define __NR_rt_sigpending 176 -#define __NR_rt_sigtimedwait 177 -#define __NR_rt_sigqueueinfo 178 -#define __NR_rt_sigsuspend 179 -#define __NR_pread64 180 -#define __NR_pwrite64 181 -#define __NR_lchown 182 -#define __NR_getcwd 183 -#define __NR_capget 184 -#define __NR_capset 185 -#define __NR_sigaltstack 186 -#define __NR_sendfile 187 -#define __NR_getpmsg 188 /* some people actually want streams */ -#define __NR_putpmsg 189 /* some people actually want streams */ -#define __NR_vfork 190 -#define __NR_ugetrlimit 191 -#define __NR_mmap2 192 -#define __NR_truncate64 193 -#define __NR_ftruncate64 194 -#define __NR_stat64 195 -#define __NR_lstat64 196 -#define __NR_fstat64 197 -#define __NR_chown32 198 -#define __NR_getuid32 199 -#define __NR_getgid32 200 -#define __NR_geteuid32 201 -#define __NR_getegid32 202 -#define __NR_setreuid32 203 -#define __NR_setregid32 204 -#define __NR_getgroups32 205 -#define __NR_setgroups32 206 -#define __NR_fchown32 207 -#define __NR_setresuid32 208 -#define __NR_getresuid32 209 -#define __NR_setresgid32 210 -#define __NR_getresgid32 211 -#define __NR_lchown32 212 -#define __NR_setuid32 213 -#define __NR_setgid32 214 -#define __NR_setfsuid32 215 -#define __NR_setfsgid32 216 -#define __NR_pivot_root 217 -#define __NR_getdents64 220 -#define __NR_gettid 221 -#define __NR_tkill 222 -#define __NR_setxattr 223 -#define __NR_lsetxattr 224 -#define __NR_fsetxattr 225 -#define __NR_getxattr 226 -#define __NR_lgetxattr 227 -#define __NR_fgetxattr 228 -#define __NR_listxattr 229 -#define __NR_llistxattr 230 -#define __NR_flistxattr 231 -#define __NR_removexattr 232 -#define __NR_lremovexattr 233 -#define __NR_fremovexattr 234 -#define __NR_futex 235 -#define __NR_sendfile64 236 -#define __NR_mincore 237 -#define __NR_madvise 238 -#define __NR_fcntl64 239 -#define __NR_readahead 240 -#define __NR_io_setup 241 -#define __NR_io_destroy 242 -#define __NR_io_getevents 243 -#define __NR_io_submit 244 -#define __NR_io_cancel 245 -#define __NR_fadvise64 246 -#define __NR_exit_group 247 -#define __NR_lookup_dcookie 248 -#define __NR_epoll_create 249 -#define __NR_epoll_ctl 250 -#define __NR_epoll_wait 251 -#define __NR_remap_file_pages 252 -#define __NR_set_tid_address 253 -#define __NR_timer_create 254 -#define __NR_timer_settime 255 -#define __NR_timer_gettime 256 -#define __NR_timer_getoverrun 257 -#define __NR_timer_delete 258 -#define __NR_clock_settime 259 -#define __NR_clock_gettime 260 -#define __NR_clock_getres 261 -#define __NR_clock_nanosleep 262 -#define __NR_statfs64 263 -#define __NR_fstatfs64 264 -#define __NR_tgkill 265 -#define __NR_utimes 266 -#define __NR_fadvise64_64 267 -#define __NR_mbind 268 -#define __NR_get_mempolicy 269 -#define __NR_set_mempolicy 270 -#define __NR_mq_open 271 -#define __NR_mq_unlink 272 -#define __NR_mq_timedsend 273 -#define __NR_mq_timedreceive 274 -#define __NR_mq_notify 275 -#define __NR_mq_getsetattr 276 -#define __NR_waitid 277 -#define __NR_vserver 278 -#define __NR_add_key 279 -#define __NR_request_key 280 -#define __NR_keyctl 281 -#define __NR_ioprio_set 282 -#define __NR_ioprio_get 283 -#define __NR_inotify_init 284 -#define __NR_inotify_add_watch 285 -#define __NR_inotify_rm_watch 286 -#define __NR_migrate_pages 287 -#define __NR_openat 288 -#define __NR_mkdirat 289 -#define __NR_mknodat 290 -#define __NR_fchownat 291 -#define __NR_futimesat 292 -#define __NR_fstatat64 293 -#define __NR_unlinkat 294 -#define __NR_renameat 295 -#define __NR_linkat 296 -#define __NR_symlinkat 297 -#define __NR_readlinkat 298 -#define __NR_fchmodat 299 -#define __NR_faccessat 300 -#define __NR_pselect6 301 -#define __NR_ppoll 302 -#define __NR_unshare 303 -#define __NR_set_robust_list 304 -#define __NR_get_robust_list 305 -#define __NR_splice 306 -#define __NR_sync_file_range 307 -#define __NR_tee 308 -#define __NR_vmsplice 309 -#define __NR_move_pages 310 -#define __NR_sched_setaffinity 311 -#define __NR_sched_getaffinity 312 -#define __NR_kexec_load 313 -#define __NR_getcpu 314 -#define __NR_epoll_pwait 315 -#define __NR_utimensat 316 -#define __NR_signalfd 317 -#define __NR_timerfd_create 318 -#define __NR_eventfd 319 -#define __NR_fallocate 320 -#define __NR_timerfd_settime 321 -#define __NR_timerfd_gettime 322 -#define __NR_signalfd4 323 -#define __NR_eventfd2 324 -#define __NR_epoll_create1 325 -#define __NR_dup3 326 -#define __NR_pipe2 327 -#define __NR_inotify_init1 328 - -#ifdef __KERNEL__ - -#define NR_syscalls 329 - -#define __ARCH_WANT_IPC_PARSE_VERSION -#define __ARCH_WANT_OLD_READDIR -#define __ARCH_WANT_OLD_STAT -#define __ARCH_WANT_STAT64 -#define __ARCH_WANT_SYS_ALARM -#define __ARCH_WANT_SYS_GETHOSTNAME -#define __ARCH_WANT_SYS_PAUSE -#define __ARCH_WANT_SYS_SGETMASK -#define __ARCH_WANT_SYS_SIGNAL -#define __ARCH_WANT_SYS_TIME -#define __ARCH_WANT_SYS_UTIME -#define __ARCH_WANT_SYS_WAITPID -#define __ARCH_WANT_SYS_SOCKETCALL -#define __ARCH_WANT_SYS_FADVISE64 -#define __ARCH_WANT_SYS_GETPGRP -#define __ARCH_WANT_SYS_LLSEEK -#define __ARCH_WANT_SYS_NICE -#define __ARCH_WANT_SYS_OLD_GETRLIMIT -#define __ARCH_WANT_SYS_OLDUMOUNT -#define __ARCH_WANT_SYS_SIGPENDING -#define __ARCH_WANT_SYS_SIGPROCMASK -#define __ARCH_WANT_SYS_RT_SIGACTION - -/* - * "Conditional" syscalls - * - * What we want is __attribute__((weak,alias("sys_ni_syscall"))), - * but it doesn't work on all toolchains, so we just do it by hand - */ -#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall") - -#endif /* __KERNEL__ */ -#endif /* _ASM_M68K_UNISTD_H_ */ diff --git a/arch/m68knommu/include/asm/user.h b/arch/m68knommu/include/asm/user.h deleted file mode 100644 index a5a555b761c..00000000000 --- a/arch/m68knommu/include/asm/user.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/user.h> |