summaryrefslogtreecommitdiffstats
path: root/arch/m68knommu/kernel/setup.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/m68knommu/kernel/setup.c')
-rw-r--r--arch/m68knommu/kernel/setup.c347
1 files changed, 347 insertions, 0 deletions
diff --git a/arch/m68knommu/kernel/setup.c b/arch/m68knommu/kernel/setup.c
new file mode 100644
index 00000000000..557238596dc
--- /dev/null
+++ b/arch/m68knommu/kernel/setup.c
@@ -0,0 +1,347 @@
+/*
+ * linux/arch/m68knommu/kernel/setup.c
+ *
+ * Copyright (C) 1999-2004 Greg Ungerer (gerg@snapgear.com)
+ * Copyright (C) 1998,1999 D. Jeff Dionne <jeff@lineo.ca>
+ * Copyleft ()) 2000 James D. Schettine {james@telos-systems.com}
+ * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>
+ * Copyright (C) 1995 Hamish Macdonald
+ * Copyright (C) 2000 Lineo Inc. (www.lineo.com)
+ * Copyright (C) 2001 Lineo, Inc. <www.lineo.com>
+ *
+ * 68VZ328 Fixes/support Evan Stawnyczy <e@lineo.ca>
+ */
+
+/*
+ * This file handles the architecture-dependent parts of system setup
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/fs.h>
+#include <linux/fb.h>
+#include <linux/console.h>
+#include <linux/genhd.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/major.h>
+#include <linux/bootmem.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/init.h>
+
+#include <asm/setup.h>
+#include <asm/irq.h>
+#include <asm/machdep.h>
+
+#ifdef CONFIG_BLK_DEV_INITRD
+#include <asm/pgtable.h>
+#endif
+
+unsigned long rom_length;
+unsigned long memory_start;
+unsigned long memory_end;
+
+char command_line[COMMAND_LINE_SIZE];
+
+/* setup some dummy routines */
+static void dummy_waitbut(void)
+{
+}
+
+void (*mach_sched_init) (irqreturn_t (*handler)(int, void *, struct pt_regs *)) = NULL;
+void (*mach_tick)( void ) = NULL;
+/* machine dependent keyboard functions */
+int (*mach_keyb_init) (void) = NULL;
+int (*mach_kbdrate) (struct kbd_repeat *) = NULL;
+void (*mach_kbd_leds) (unsigned int) = NULL;
+/* machine dependent irq functions */
+void (*mach_init_IRQ) (void) = NULL;
+irqreturn_t (*(*mach_default_handler)[]) (int, void *, struct pt_regs *) = NULL;
+void (*mach_enable_irq) (unsigned int) = NULL;
+void (*mach_disable_irq) (unsigned int) = NULL;
+int (*mach_get_irq_list) (struct seq_file *, void *) = NULL;
+void (*mach_process_int) (int irq, struct pt_regs *fp) = NULL;
+void (*mach_trap_init) (void);
+/* machine dependent timer functions */
+unsigned long (*mach_gettimeoffset) (void) = NULL;
+void (*mach_gettod) (int*, int*, int*, int*, int*, int*) = NULL;
+int (*mach_hwclk) (int, struct hwclk_time*) = NULL;
+int (*mach_set_clock_mmss) (unsigned long) = NULL;
+void (*mach_mksound)( unsigned int count, unsigned int ticks ) = NULL;
+void (*mach_reset)( void ) = NULL;
+void (*waitbut)(void) = dummy_waitbut;
+void (*mach_debug_init)(void) = NULL;
+void (*mach_halt)( void ) = NULL;
+void (*mach_power_off)( void ) = NULL;
+
+
+#ifdef CONFIG_M68000
+ #define CPU "MC68000"
+#endif
+#ifdef CONFIG_M68328
+ #define CPU "MC68328"
+#endif
+#ifdef CONFIG_M68EZ328
+ #define CPU "MC68EZ328"
+#endif
+#ifdef CONFIG_M68VZ328
+ #define CPU "MC68VZ328"
+#endif
+#ifdef CONFIG_M68332
+ #define CPU "MC68332"
+#endif
+#ifdef CONFIG_M68360
+ #define CPU "MC68360"
+#endif
+#if defined(CONFIG_M5206)
+ #define CPU "COLDFIRE(m5206)"
+#endif
+#if defined(CONFIG_M5206e)
+ #define CPU "COLDFIRE(m5206e)"
+#endif
+#if defined(CONFIG_M5249)
+ #define CPU "COLDFIRE(m5249)"
+#endif
+#if defined(CONFIG_M527x)
+ #define CPU "COLDFIRE(m5270/5271/5274/5275)"
+#endif
+#if defined(CONFIG_M5272)
+ #define CPU "COLDFIRE(m5272)"
+#endif
+#if defined(CONFIG_M528x)
+ #define CPU "COLDFIRE(m5280/5282)"
+#endif
+#if defined(CONFIG_M5307)
+ #define CPU "COLDFIRE(m5307)"
+#endif
+#if defined(CONFIG_M5407)
+ #define CPU "COLDFIRE(m5407)"
+#endif
+#ifndef CPU
+ #define CPU "UNKOWN"
+#endif
+
+/* (es) */
+/* note: why is this defined here? the must be a better place to put this */
+#if defined( CONFIG_TELOS) || defined( CONFIG_UCDIMM ) || defined( CONFIG_UCSIMM ) || defined(CONFIG_DRAGEN2) || (defined( CONFIG_PILOT ) && defined( CONFIG_M68328 ))
+#define CAT_ROMARRAY
+#endif
+/* (/es) */
+
+extern int _stext, _etext, _sdata, _edata, _sbss, _ebss, _end;
+extern int _ramstart, _ramend;
+
+void setup_arch(char **cmdline_p)
+{
+ int bootmap_size;
+
+#if defined(CAT_ROMARRAY) && defined(DEBUG)
+ extern int __data_rom_start;
+ extern int __data_start;
+ int *romarray = (int *)((int) &__data_rom_start +
+ (int)&_edata - (int)&__data_start);
+#endif
+
+ memory_start = PAGE_ALIGN(_ramstart);
+ memory_end = _ramend; /* by now the stack is part of the init task */
+
+ init_mm.start_code = (unsigned long) &_stext;
+ init_mm.end_code = (unsigned long) &_etext;
+ init_mm.end_data = (unsigned long) &_edata;
+ init_mm.brk = (unsigned long) 0;
+
+ config_BSP(&command_line[0], sizeof(command_line));
+
+ printk(KERN_INFO "\x0F\r\n\nuClinux/" CPU "\n");
+
+#ifdef CONFIG_UCDIMM
+ printk(KERN_INFO "uCdimm by Lineo, Inc. <www.lineo.com>\n");
+#endif
+#ifdef CONFIG_M68VZ328
+ printk(KERN_INFO "M68VZ328 support by Evan Stawnyczy <e@lineo.ca>\n");
+#endif
+#ifdef CONFIG_COLDFIRE
+ printk(KERN_INFO "COLDFIRE port done by Greg Ungerer, gerg@snapgear.com\n");
+#ifdef CONFIG_M5307
+ printk(KERN_INFO "Modified for M5307 by Dave Miller, dmiller@intellistor.com\n");
+#endif
+#ifdef CONFIG_ELITE
+ printk(KERN_INFO "Modified for M5206eLITE by Rob Scott, rscott@mtrob.fdns.net\n");
+#endif
+#ifdef CONFIG_TELOS
+ printk(KERN_INFO "Modified for Omnia ToolVox by James D. Schettine, james@telos-systems.com\n");
+#endif
+#endif
+ printk(KERN_INFO "Flat model support (C) 1998,1999 Kenneth Albanowski, D. Jeff Dionne\n");
+
+#if defined( CONFIG_PILOT ) && defined( CONFIG_M68328 )
+ printk(KERN_INFO "TRG SuperPilot FLASH card support <info@trgnet.com>\n");
+#endif
+
+#if defined( CONFIG_PILOT ) && defined( CONFIG_M68EZ328 )
+ printk(KERN_INFO "PalmV support by Lineo Inc. <jeff@uclinux.com>\n");
+#endif
+
+#ifdef CONFIG_M68EZ328ADS
+ printk(KERN_INFO "M68EZ328ADS board support (C) 1999 Vladimir Gurevich <vgurevic@cisco.com>\n");
+#endif
+
+#ifdef CONFIG_ALMA_ANS
+ printk(KERN_INFO "Alma Electronics board support (C) 1999 Vladimir Gurevich <vgurevic@cisco.com>\n");
+#endif
+#if defined (CONFIG_M68360)
+ printk(KERN_INFO "QUICC port done by SED Systems <hamilton@sedsystems.ca>,\n");
+ printk(KERN_INFO "based on 2.0.38 port by Lineo Inc. <mleslie@lineo.com>.\n");
+#endif
+#ifdef CONFIG_DRAGEN2
+ printk(KERN_INFO "DragonEngine II board support by Georges Menie\n");
+#endif
+
+#ifdef DEBUG
+ printk(KERN_DEBUG "KERNEL -> TEXT=0x%06x-0x%06x DATA=0x%06x-0x%06x "
+ "BSS=0x%06x-0x%06x\n", (int) &_stext, (int) &_etext,
+ (int) &_sdata, (int) &_edata,
+ (int) &_sbss, (int) &_ebss);
+ printk(KERN_DEBUG "KERNEL -> ROMFS=0x%06x-0x%06x MEM=0x%06x-0x%06x "
+ "STACK=0x%06x-0x%06x\n",
+#ifdef CAT_ROMARRAY
+ (int) romarray, ((int) romarray) + romarray[2],
+#else
+ (int) &_ebss, (int) memory_start,
+#endif
+ (int) memory_start, (int) memory_end,
+ (int) memory_end, (int) _ramend);
+#endif
+
+ /* Keep a copy of command line */
+ *cmdline_p = &command_line[0];
+ memcpy(saved_command_line, command_line, COMMAND_LINE_SIZE);
+ saved_command_line[COMMAND_LINE_SIZE-1] = 0;
+
+#ifdef DEBUG
+ if (strlen(*cmdline_p))
+ printk(KERN_DEBUG "Command line: '%s'\n", *cmdline_p);
+#endif
+
+#if defined(CONFIG_FRAMEBUFFER_CONSOLE) && defined(CONFIG_DUMMY_CONSOLE)
+ conswitchp = &dummy_con;
+#endif
+
+ /*
+ * Give all the memory to the bootmap allocator, tell it to put the
+ * boot mem_map at the start of memory.
+ */
+ bootmap_size = init_bootmem_node(
+ NODE_DATA(0),
+ memory_start >> PAGE_SHIFT, /* map goes here */
+ PAGE_OFFSET >> PAGE_SHIFT, /* 0 on coldfire */
+ memory_end >> PAGE_SHIFT);
+ /*
+ * Free the usable memory, we have to make sure we do not free
+ * the bootmem bitmap so we then reserve it after freeing it :-)
+ */
+ free_bootmem(memory_start, memory_end - memory_start);
+ reserve_bootmem(memory_start, bootmap_size);
+
+ /*
+ * Get kmalloc into gear.
+ */
+ paging_init();
+}
+
+int get_cpuinfo(char * buffer)
+{
+ char *cpu, *mmu, *fpu;
+ u_long clockfreq;
+
+ cpu = CPU;
+ mmu = "none";
+ fpu = "none";
+
+#ifdef CONFIG_COLDFIRE
+ clockfreq = (loops_per_jiffy*HZ)*3;
+#else
+ clockfreq = (loops_per_jiffy*HZ)*16;
+#endif
+
+ return(sprintf(buffer, "CPU:\t\t%s\n"
+ "MMU:\t\t%s\n"
+ "FPU:\t\t%s\n"
+ "Clocking:\t%lu.%1luMHz\n"
+ "BogoMips:\t%lu.%02lu\n"
+ "Calibration:\t%lu loops\n",
+ cpu, mmu, fpu,
+ clockfreq/1000000,(clockfreq/100000)%10,
+ (loops_per_jiffy*HZ)/500000,((loops_per_jiffy*HZ)/5000)%100,
+ (loops_per_jiffy*HZ)));
+
+}
+
+/*
+ * Get CPU information for use by the procfs.
+ */
+
+static int show_cpuinfo(struct seq_file *m, void *v)
+{
+ char *cpu, *mmu, *fpu;
+ u_long clockfreq;
+
+ cpu = CPU;
+ mmu = "none";
+ fpu = "none";
+
+#ifdef CONFIG_COLDFIRE
+ clockfreq = (loops_per_jiffy*HZ)*3;
+#else
+ clockfreq = (loops_per_jiffy*HZ)*16;
+#endif
+
+ seq_printf(m, "CPU:\t\t%s\n"
+ "MMU:\t\t%s\n"
+ "FPU:\t\t%s\n"
+ "Clocking:\t%lu.%1luMHz\n"
+ "BogoMips:\t%lu.%02lu\n"
+ "Calibration:\t%lu loops\n",
+ cpu, mmu, fpu,
+ clockfreq/1000000,(clockfreq/100000)%10,
+ (loops_per_jiffy*HZ)/500000,((loops_per_jiffy*HZ)/5000)%100,
+ (loops_per_jiffy*HZ));
+
+ return 0;
+}
+
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+ return *pos < NR_CPUS ? ((void *) 0x12345678) : NULL;
+}
+
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+ ++*pos;
+ return c_start(m, pos);
+}
+
+static void c_stop(struct seq_file *m, void *v)
+{
+}
+
+struct seq_operations cpuinfo_op = {
+ .start = c_start,
+ .next = c_next,
+ .stop = c_stop,
+ .show = show_cpuinfo,
+};
+
+void arch_gettod(int *year, int *mon, int *day, int *hour,
+ int *min, int *sec)
+{
+ if (mach_gettod)
+ mach_gettod(year, mon, day, hour, min, sec);
+ else
+ *year = *mon = *day = *hour = *min = *sec = 0;
+}
+