3 files changed, 1 insertions, 140 deletions

diff --git a/arch/m68knommu/kernel/Makefile b/arch/m68knommu/kernel/Makefile
index 1524b39ad63..f0eab3dedb5 100644
--- a/arch/m68knommu/kernel/Makefile
+++ b/arch/m68knommu/kernel/Makefile
@@ -5,7 +5,7 @@
 extra-y := vmlinux.lds
 
 obj-y += dma.o entry.o init_task.o irq.o m68k_ksyms.o process.o ptrace.o \
-	 semaphore.o setup.o signal.o syscalltable.o sys_m68k.o time.o traps.o
+	 setup.o signal.o syscalltable.o sys_m68k.o time.o traps.o
 
 obj-$(CONFIG_MODULES)	+= module.o
 obj-$(CONFIG_COMEMPCI)	+= comempci.o
diff --git a/arch/m68knommu/kernel/m68k_ksyms.c b/arch/m68knommu/kernel/m68k_ksyms.c
index 53fad149028..39fe0a7aec3 100644
--- a/arch/m68knommu/kernel/m68k_ksyms.c
+++ b/arch/m68knommu/kernel/m68k_ksyms.c
@@ -13,7 +13,6 @@
 #include <asm/pgalloc.h>
 #include <asm/irq.h>
 #include <asm/io.h>
-#include <asm/semaphore.h>
 #include <asm/checksum.h>
 #include <asm/current.h>
 
@@ -39,11 +38,6 @@ EXPORT_SYMBOL(csum_partial_copy_nocheck);
 EXPORT_SYMBOL(memcpy);
 EXPORT_SYMBOL(memset);
 
-EXPORT_SYMBOL(__down_failed);
-EXPORT_SYMBOL(__down_failed_interruptible);
-EXPORT_SYMBOL(__down_failed_trylock);
-EXPORT_SYMBOL(__up_wakeup);
-
 /*
  * libgcc functions - functions that are used internally by the
  * compiler...  (prototypes are not correct though, but that
diff --git a/arch/m68knommu/kernel/semaphore.c b/arch/m68knommu/kernel/semaphore.c
deleted file mode 100644
index bce2bc7d87c..00000000000
--- a/arch/m68knommu/kernel/semaphore.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- *  Generic semaphore code. Buyer beware. Do your own
- * specific changes in <asm/semaphore-helper.h>
- */
-
-#include <linux/sched.h>
-#include <linux/err.h>
-#include <linux/init.h>
-#include <asm/semaphore-helper.h>
-
-#ifndef CONFIG_RMW_INSNS
-spinlock_t semaphore_wake_lock;
-#endif
-
-/*
- * Semaphores are implemented using a two-way counter:
- * The "count" variable is decremented for each process
- * that tries to sleep, while the "waking" variable is
- * incremented when the "up()" code goes to wake up waiting
- * processes.
- *
- * Notably, the inline "up()" and "down()" functions can
- * efficiently test if they need to do any extra work (up
- * needs to do something only if count was negative before
- * the increment operation.
- *
- * waking_non_zero() (from asm/semaphore.h) must execute
- * atomically.
- *
- * When __up() is called, the count was negative before
- * incrementing it, and we need to wake up somebody.
- *
- * This routine adds one to the count of processes that need to
- * wake up and exit.  ALL waiting processes actually wake up but
- * only the one that gets to the "waking" field first will gate
- * through and acquire the semaphore.  The others will go back
- * to sleep.
- *
- * Note that these functions are only called when there is
- * contention on the lock, and as such all this is the
- * "non-critical" part of the whole semaphore business. The
- * critical part is the inline stuff in <asm/semaphore.h>
- * where we want to avoid any extra jumps and calls.
- */
-void __up(struct semaphore *sem)
-{
-	wake_one_more(sem);
-	wake_up(&sem->wait);
-}
-
-/*
- * Perform the "down" function.  Return zero for semaphore acquired,
- * return negative for signalled out of the function.
- *
- * If called from __down, the return is ignored and the wait loop is
- * not interruptible.  This means that a task waiting on a semaphore
- * using "down()" cannot be killed until someone does an "up()" on
- * the semaphore.
- *
- * If called from __down_interruptible, the return value gets checked
- * upon return.  If the return value is negative then the task continues
- * with the negative value in the return register (it can be tested by
- * the caller).
- *
- * Either form may be used in conjunction with "up()".
- *
- */
-
-
-#define DOWN_HEAD(task_state)						\
-									\
-									\
-	current->state = (task_state);					\
-	add_wait_queue(&sem->wait, &wait);				\
-									\
-	/*								\
-	 * Ok, we're set up.  sem->count is known to be less than zero	\
-	 * so we must wait.						\
-	 *								\
-	 * We can let go the lock for purposes of waiting.		\
-	 * We re-acquire it after awaking so as to protect		\
-	 * all semaphore operations.					\
-	 *								\
-	 * If "up()" is called before we call waking_non_zero() then	\
-	 * we will catch it right away.  If it is called later then	\
-	 * we will have to go through a wakeup cycle to catch it.	\
-	 *								\
-	 * Multiple waiters contend for the semaphore lock to see	\
-	 * who gets to gate through and who has to wait some more.	\
-	 */								\
-	for (;;) {
-
-#define DOWN_TAIL(task_state)			\
-		current->state = (task_state);	\
-	}					\
-	current->state = TASK_RUNNING;		\
-	remove_wait_queue(&sem->wait, &wait);
-
-void __sched __down(struct semaphore * sem)
-{
-	DECLARE_WAITQUEUE(wait, current);
-
-	DOWN_HEAD(TASK_UNINTERRUPTIBLE)
-	if (waking_non_zero(sem))
-		break;
-	schedule();
-	DOWN_TAIL(TASK_UNINTERRUPTIBLE)
-}
-
-int __sched __down_interruptible(struct semaphore * sem)
-{
-	DECLARE_WAITQUEUE(wait, current);
-	int ret = 0;
-
-	DOWN_HEAD(TASK_INTERRUPTIBLE)
-
-	ret = waking_non_zero_interruptible(sem, current);
-	if (ret)
-	{
-		if (ret == 1)
-			/* ret != 0 only if we get interrupted -arca */
-			ret = 0;
-		break;
-	}
-	schedule();
-	DOWN_TAIL(TASK_INTERRUPTIBLE)
-	return ret;
-}
-
-int __down_trylock(struct semaphore * sem)
-{
-	return waking_non_zero_trylock(sem);
-}