diff options
Diffstat (limited to 'arch/m68knommu/platform/5307/nettel.c')
| -rw-r--r-- | arch/m68knommu/platform/5307/nettel.c | 153 |
1 files changed, 153 insertions, 0 deletions
diff --git a/arch/m68knommu/platform/5307/nettel.c b/arch/m68knommu/platform/5307/nettel.c new file mode 100644 index 00000000000..e925ea4602f --- /dev/null +++ b/arch/m68knommu/platform/5307/nettel.c @@ -0,0 +1,153 @@ +/***************************************************************************/ + +/* + * nettel.c -- startup code support for the NETtel boards + * + * Copyright (C) 2009, Greg Ungerer (gerg@snapgear.com) + */ + +/***************************************************************************/ + +#include <linux/kernel.h> +#include <linux/param.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/platform_device.h> +#include <asm/coldfire.h> +#include <asm/mcfsim.h> +#include <asm/nettel.h> + +/***************************************************************************/ + +/* + * Define the IO and interrupt resources of the 2 SMC9196 interfaces. + */ +#define NETTEL_SMC0_ADDR 0x30600300 +#define NETTEL_SMC0_IRQ 29 + +#define NETTEL_SMC1_ADDR 0x30600000 +#define NETTEL_SMC1_IRQ 27 + +/* + * We need some access into the SMC9196 registers. Define those registers + * we will need here (including the smc91x.h doesn't seem to give us these + * in a simple form). + */ +#define SMC91xx_BANKSELECT 14 +#define SMC91xx_BASEADDR 2 +#define SMC91xx_BASEMAC 4 + +/***************************************************************************/ + +static struct resource nettel_smc91x_0_resources[] = { + { + .start = NETTEL_SMC0_ADDR, + .end = NETTEL_SMC0_ADDR + 0x20, + .flags = IORESOURCE_MEM, + }, + { + .start = NETTEL_SMC0_IRQ, + .end = NETTEL_SMC0_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource nettel_smc91x_1_resources[] = { + { + .start = NETTEL_SMC1_ADDR, + .end = NETTEL_SMC1_ADDR + 0x20, + .flags = IORESOURCE_MEM, + }, + { + .start = NETTEL_SMC1_IRQ, + .end = NETTEL_SMC1_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device nettel_smc91x[] = { + { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(nettel_smc91x_0_resources), + .resource = nettel_smc91x_0_resources, + }, + { + .name = "smc91x", + .id = 1, + .num_resources = ARRAY_SIZE(nettel_smc91x_1_resources), + .resource = nettel_smc91x_1_resources, + }, +}; + +static struct platform_device *nettel_devices[] __initdata = { + &nettel_smc91x[0], + &nettel_smc91x[1], +}; + +/***************************************************************************/ + +static u8 nettel_macdefault[] __initdata = { + 0x00, 0xd0, 0xcf, 0x00, 0x00, 0x01, +}; + +/* + * Set flash contained MAC address into SMC9196 core. Make sure the flash + * MAC address is sane, and not an empty flash. If no good use the Moreton + * Bay default MAC address instead. + */ + +static void __init nettel_smc91x_setmac(unsigned int ioaddr, unsigned int flashaddr) +{ + u16 *macp; + + macp = (u16 *) flashaddr; + if ((macp[0] == 0xffff) && (macp[1] == 0xffff) && (macp[2] == 0xffff)) + macp = (u16 *) &nettel_macdefault[0]; + + writew(1, NETTEL_SMC0_ADDR + SMC91xx_BANKSELECT); + writew(macp[0], ioaddr + SMC91xx_BASEMAC); + writew(macp[1], ioaddr + SMC91xx_BASEMAC + 2); + writew(macp[2], ioaddr + SMC91xx_BASEMAC + 4); +} + +/***************************************************************************/ + +/* + * Re-map the address space of at least one of the SMC ethernet + * parts. Both parts power up decoding the same address, so we + * need to move one of them first, before doing anything else. + */ + +static void __init nettel_smc91x_init(void) +{ + writew(0x00ec, MCF_MBAR + MCFSIM_PADDR); + mcf_setppdata(0, 0x0080); + writew(1, NETTEL_SMC0_ADDR + SMC91xx_BANKSELECT); + writew(0x0067, NETTEL_SMC0_ADDR + SMC91xx_BASEADDR); + mcf_setppdata(0x0080, 0); + + /* Set correct chip select timing for SMC9196 accesses */ + writew(0x1180, MCF_MBAR + MCFSIM_CSCR3); + + /* Set the SMC interrupts to be auto-vectored */ + mcf_autovector(NETTEL_SMC0_IRQ); + mcf_autovector(NETTEL_SMC1_IRQ); + + /* Set MAC addresses from flash for both interfaces */ + nettel_smc91x_setmac(NETTEL_SMC0_ADDR, 0xf0006000); + nettel_smc91x_setmac(NETTEL_SMC1_ADDR, 0xf0006006); +} + +/***************************************************************************/ + +static int __init init_nettel(void) +{ + nettel_smc91x_init(); + platform_add_devices(nettel_devices, ARRAY_SIZE(nettel_devices)); + return 0; +} + +arch_initcall(init_nettel); + +/***************************************************************************/ |