diff options
Diffstat (limited to 'arch/microblaze/kernel/hw_exception_handler.S')
-rw-r--r-- | arch/microblaze/kernel/hw_exception_handler.S | 112 |
1 files changed, 48 insertions, 64 deletions
diff --git a/arch/microblaze/kernel/hw_exception_handler.S b/arch/microblaze/kernel/hw_exception_handler.S index 2b86c03aa84..995a2123635 100644 --- a/arch/microblaze/kernel/hw_exception_handler.S +++ b/arch/microblaze/kernel/hw_exception_handler.S @@ -313,13 +313,13 @@ _hw_exception_handler: mfs r5, rmsr; nop swi r5, r1, 0; - mfs r3, resr + mfs r4, resr nop - mfs r4, rear; + mfs r3, rear; nop #ifndef CONFIG_MMU - andi r5, r3, 0x1000; /* Check ESR[DS] */ + andi r5, r4, 0x1000; /* Check ESR[DS] */ beqi r5, not_in_delay_slot; /* Branch if ESR[DS] not set */ mfs r17, rbtr; /* ESR[DS] set - return address in BTR */ nop @@ -327,13 +327,14 @@ not_in_delay_slot: swi r17, r1, PT_R17 #endif - andi r5, r3, 0x1F; /* Extract ESR[EXC] */ + andi r5, r4, 0x1F; /* Extract ESR[EXC] */ #ifdef CONFIG_MMU /* Calculate exception vector offset = r5 << 2 */ addk r6, r5, r5; /* << 1 */ addk r6, r6, r6; /* << 2 */ +#ifdef DEBUG /* counting which exception happen */ lwi r5, r0, 0x200 + TOPHYS(r0_ram) addi r5, r5, 1 @@ -341,6 +342,7 @@ not_in_delay_slot: lwi r5, r6, 0x200 + TOPHYS(r0_ram) addi r5, r5, 1 swi r5, r6, 0x200 + TOPHYS(r0_ram) +#endif /* end */ /* Load the HW Exception vector */ lwi r6, r6, TOPHYS(_MB_HW_ExceptionVectorTable) @@ -376,7 +378,7 @@ handle_other_ex: /* Handle Other exceptions here */ swi r18, r1, PT_R18 or r5, r1, r0 - andi r6, r3, 0x1F; /* Load ESR[EC] */ + andi r6, r4, 0x1F; /* Load ESR[EC] */ lwi r7, r0, PER_CPU(KM) /* MS: saving current kernel mode to regs */ swi r7, r1, PT_MODE mfs r7, rfsr @@ -426,11 +428,11 @@ handle_other_ex: /* Handle Other exceptions here */ */ handle_unaligned_ex: /* Working registers already saved: R3, R4, R5, R6 - * R3 = ESR - * R4 = EAR + * R4 = ESR + * R3 = EAR */ #ifdef CONFIG_MMU - andi r6, r3, 0x1000 /* Check ESR[DS] */ + andi r6, r4, 0x1000 /* Check ESR[DS] */ beqi r6, _no_delayslot /* Branch if ESR[DS] not set */ mfs r17, rbtr; /* ESR[DS] set - return address in BTR */ nop @@ -439,7 +441,7 @@ _no_delayslot: RESTORE_STATE; bri unaligned_data_trap #endif - andi r6, r3, 0x3E0; /* Mask and extract the register operand */ + andi r6, r4, 0x3E0; /* Mask and extract the register operand */ srl r6, r6; /* r6 >> 5 */ srl r6, r6; srl r6, r6; @@ -448,33 +450,33 @@ _no_delayslot: /* Store the register operand in a temporary location */ sbi r6, r0, TOPHYS(ex_reg_op); - andi r6, r3, 0x400; /* Extract ESR[S] */ + andi r6, r4, 0x400; /* Extract ESR[S] */ bnei r6, ex_sw; ex_lw: - andi r6, r3, 0x800; /* Extract ESR[W] */ + andi r6, r4, 0x800; /* Extract ESR[W] */ beqi r6, ex_lhw; - lbui r5, r4, 0; /* Exception address in r4 */ + lbui r5, r3, 0; /* Exception address in r3 */ /* Load a word, byte-by-byte from destination address and save it in tmp space */ sbi r5, r0, TOPHYS(ex_tmp_data_loc_0); - lbui r5, r4, 1; + lbui r5, r3, 1; sbi r5, r0, TOPHYS(ex_tmp_data_loc_1); - lbui r5, r4, 2; + lbui r5, r3, 2; sbi r5, r0, TOPHYS(ex_tmp_data_loc_2); - lbui r5, r4, 3; + lbui r5, r3, 3; sbi r5, r0, TOPHYS(ex_tmp_data_loc_3); - /* Get the destination register value into r3 */ - lwi r3, r0, TOPHYS(ex_tmp_data_loc_0); + /* Get the destination register value into r4 */ + lwi r4, r0, TOPHYS(ex_tmp_data_loc_0); bri ex_lw_tail; ex_lhw: - lbui r5, r4, 0; /* Exception address in r4 */ + lbui r5, r3, 0; /* Exception address in r3 */ /* Load a half-word, byte-by-byte from destination address and save it in tmp space */ sbi r5, r0, TOPHYS(ex_tmp_data_loc_0); - lbui r5, r4, 1; + lbui r5, r3, 1; sbi r5, r0, TOPHYS(ex_tmp_data_loc_1); - /* Get the destination register value into r3 */ - lhui r3, r0, TOPHYS(ex_tmp_data_loc_0); + /* Get the destination register value into r4 */ + lhui r4, r0, TOPHYS(ex_tmp_data_loc_0); ex_lw_tail: /* Get the destination register number into r5 */ lbui r5, r0, TOPHYS(ex_reg_op); @@ -502,25 +504,25 @@ ex_sw_tail: andi r6, r6, 0x800; /* Extract ESR[W] */ beqi r6, ex_shw; /* Get the word - delay slot */ - swi r3, r0, TOPHYS(ex_tmp_data_loc_0); + swi r4, r0, TOPHYS(ex_tmp_data_loc_0); /* Store the word, byte-by-byte into destination address */ - lbui r3, r0, TOPHYS(ex_tmp_data_loc_0); - sbi r3, r4, 0; - lbui r3, r0, TOPHYS(ex_tmp_data_loc_1); - sbi r3, r4, 1; - lbui r3, r0, TOPHYS(ex_tmp_data_loc_2); - sbi r3, r4, 2; - lbui r3, r0, TOPHYS(ex_tmp_data_loc_3); - sbi r3, r4, 3; + lbui r4, r0, TOPHYS(ex_tmp_data_loc_0); + sbi r4, r3, 0; + lbui r4, r0, TOPHYS(ex_tmp_data_loc_1); + sbi r4, r3, 1; + lbui r4, r0, TOPHYS(ex_tmp_data_loc_2); + sbi r4, r3, 2; + lbui r4, r0, TOPHYS(ex_tmp_data_loc_3); + sbi r4, r3, 3; bri ex_handler_done; ex_shw: /* Store the lower half-word, byte-by-byte into destination address */ - swi r3, r0, TOPHYS(ex_tmp_data_loc_0); - lbui r3, r0, TOPHYS(ex_tmp_data_loc_2); - sbi r3, r4, 0; - lbui r3, r0, TOPHYS(ex_tmp_data_loc_3); - sbi r3, r4, 1; + swi r4, r0, TOPHYS(ex_tmp_data_loc_0); + lbui r4, r0, TOPHYS(ex_tmp_data_loc_2); + sbi r4, r3, 0; + lbui r4, r0, TOPHYS(ex_tmp_data_loc_3); + sbi r4, r3, 1; ex_sw_end: /* Exception handling of store word, ends. */ ex_handler_done: @@ -560,21 +562,16 @@ ex_handler_done: */ mfs r11, rpid nop - bri 4 - mfs r3, rear /* Get faulting address */ - nop /* If we are faulting a kernel address, we have to use the * kernel page tables. */ - ori r4, r0, CONFIG_KERNEL_START - cmpu r4, r3, r4 - bgti r4, ex3 + ori r5, r0, CONFIG_KERNEL_START + cmpu r5, r3, r5 + bgti r5, ex3 /* First, check if it was a zone fault (which means a user * tried to access a kernel or read-protected page - always * a SEGV). All other faults here must be stores, so no * need to check ESR_S as well. */ - mfs r4, resr - nop andi r4, r4, 0x800 /* ESR_Z - zone protection */ bnei r4, ex2 @@ -589,8 +586,6 @@ ex_handler_done: * tried to access a kernel or read-protected page - always * a SEGV). All other faults here must be stores, so no * need to check ESR_S as well. */ - mfs r4, resr - nop andi r4, r4, 0x800 /* ESR_Z */ bnei r4, ex2 /* get current task address */ @@ -665,8 +660,6 @@ ex_handler_done: * R3 = ESR */ - mfs r3, rear /* Get faulting address */ - nop RESTORE_STATE; bri page_fault_instr_trap @@ -677,18 +670,15 @@ ex_handler_done: */ handle_data_tlb_miss_exception: /* Working registers already saved: R3, R4, R5, R6 - * R3 = ESR + * R3 = EAR, R4 = ESR */ mfs r11, rpid nop - bri 4 - mfs r3, rear /* Get faulting address */ - nop /* If we are faulting a kernel address, we have to use the * kernel page tables. */ - ori r4, r0, CONFIG_KERNEL_START - cmpu r4, r3, r4 + ori r6, r0, CONFIG_KERNEL_START + cmpu r4, r3, r6 bgti r4, ex5 ori r4, r0, swapper_pg_dir mts rpid, r0 /* TLB will have 0 TID */ @@ -731,9 +721,8 @@ ex_handler_done: * Many of these bits are software only. Bits we don't set * here we (properly should) assume have the appropriate value. */ + brid finish_tlb_load andni r4, r4, 0x0ce2 /* Make sure 20, 21 are zero */ - - bri finish_tlb_load ex7: /* The bailout. Restore registers to pre-exception conditions * and call the heavyweights to help us out. @@ -754,9 +743,6 @@ ex_handler_done: */ mfs r11, rpid nop - bri 4 - mfs r3, rear /* Get faulting address */ - nop /* If we are faulting a kernel address, we have to use the * kernel page tables. @@ -792,7 +778,7 @@ ex_handler_done: lwi r4, r5, 0 /* Get Linux PTE */ andi r6, r4, _PAGE_PRESENT - beqi r6, ex7 + beqi r6, ex10 ori r4, r4, _PAGE_ACCESSED swi r4, r5, 0 @@ -805,9 +791,8 @@ ex_handler_done: * Many of these bits are software only. Bits we don't set * here we (properly should) assume have the appropriate value. */ + brid finish_tlb_load andni r4, r4, 0x0ce2 /* Make sure 20, 21 are zero */ - - bri finish_tlb_load ex10: /* The bailout. Restore registers to pre-exception conditions * and call the heavyweights to help us out. @@ -837,9 +822,9 @@ ex_handler_done: andi r5, r5, (MICROBLAZE_TLB_SIZE-1) ori r6, r0, 1 cmp r31, r5, r6 - blti r31, sem + blti r31, ex12 addik r5, r6, 1 - sem: + ex12: /* MS: save back current TLB index */ swi r5, r0, TOPHYS(tlb_index) @@ -859,7 +844,6 @@ ex_handler_done: nop /* Done...restore registers and get out of here. */ - ex12: mts rpid, r11 nop bri 4 |