diff options
Diffstat (limited to 'arch/microblaze')
70 files changed, 4695 insertions, 2016 deletions
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig index cd5837e298b..76818f92653 100644 --- a/arch/microblaze/Kconfig +++ b/arch/microblaze/Kconfig @@ -14,6 +14,8 @@ config MICROBLAZE select USB_ARCH_HAS_EHCI select ARCH_WANT_OPTIONAL_GPIOLIB select HAVE_OPROFILE + select HAVE_DMA_ATTRS + select HAVE_DMA_API_DEBUG select TRACING_SUPPORT config SWAP @@ -73,12 +75,6 @@ config LOCKDEP_SUPPORT config HAVE_LATENCYTOP_SUPPORT def_bool y -config PCI - def_bool n - -config NO_DMA - def_bool y - config DTC def_bool y @@ -130,6 +126,7 @@ config CMDLINE_FORCE config OF def_bool y + select OF_FLATTREE config PROC_DEVICETREE bool "Support for device tree in /proc" @@ -145,7 +142,6 @@ menu "Advanced setup" config ADVANCED_OPTIONS bool "Prompt for advanced kernel configuration options" - depends on MMU help This option will enable prompting for a variety of advanced kernel configuration options. These options can cause the kernel to not @@ -157,6 +153,15 @@ config ADVANCED_OPTIONS comment "Default settings for advanced configuration options are used" depends on !ADVANCED_OPTIONS +config XILINX_UNCACHED_SHADOW + bool "Are you using uncached shadow for RAM ?" + depends on ADVANCED_OPTIONS && !MMU + default n + help + This is needed to be able to allocate uncachable memory regions. + The feature requires the design to define the RAM memory controller + window to be twice as large as the actual physical memory. + config HIGHMEM_START_BOOL bool "Set high memory pool address" depends on ADVANCED_OPTIONS && HIGHMEM @@ -174,7 +179,7 @@ config HIGHMEM_START config LOWMEM_SIZE_BOOL bool "Set maximum low memory" - depends on ADVANCED_OPTIONS + depends on ADVANCED_OPTIONS && MMU help This option allows you to set the maximum amount of memory which will be used as "low memory", that is, memory which the kernel can @@ -186,7 +191,6 @@ config LOWMEM_SIZE_BOOL config LOWMEM_SIZE hex "Maximum low memory size (in bytes)" if LOWMEM_SIZE_BOOL - depends on MMU default "0x30000000" config KERNEL_START_BOOL @@ -207,7 +211,7 @@ config KERNEL_START config TASK_SIZE_BOOL bool "Set custom user task size" - depends on ADVANCED_OPTIONS + depends on ADVANCED_OPTIONS && MMU help This option allows you to set the amount of virtual address space allocated to user tasks. This can be useful in optimizing the @@ -217,42 +221,34 @@ config TASK_SIZE_BOOL config TASK_SIZE hex "Size of user task space" if TASK_SIZE_BOOL - depends on MMU default "0x80000000" -config CONSISTENT_START_BOOL - bool "Set custom consistent memory pool address" - depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE - help - This option allows you to set the base virtual address - of the the consistent memory pool. This pool of virtual - memory is used to make consistent memory allocations. +endmenu -config CONSISTENT_START - hex "Base virtual address of consistent memory pool" if CONSISTENT_START_BOOL - depends on MMU - default "0xff100000" if NOT_COHERENT_CACHE +source "mm/Kconfig" -config CONSISTENT_SIZE_BOOL - bool "Set custom consistent memory pool size" - depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE - help - This option allows you to set the size of the the - consistent memory pool. This pool of virtual memory - is used to make consistent memory allocations. +menu "Exectuable file formats" -config CONSISTENT_SIZE - hex "Size of consistent memory pool" if CONSISTENT_SIZE_BOOL - depends on MMU - default "0x00200000" if NOT_COHERENT_CACHE +source "fs/Kconfig.binfmt" endmenu -source "mm/Kconfig" +menu "Bus Options" -menu "Exectuable file formats" +config PCI + bool "PCI support" -source "fs/Kconfig.binfmt" +config PCI_DOMAINS + def_bool PCI + +config PCI_SYSCALL + def_bool PCI + +config PCI_XILINX + bool "Xilinx PCI host bridge support" + depends on PCI + +source "drivers/pci/Kconfig" endmenu diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile index d2d6cfcb1a3..72f6e858374 100644 --- a/arch/microblaze/Makefile +++ b/arch/microblaze/Makefile @@ -50,6 +50,7 @@ libs-y += $(LIBGCC) core-y += arch/microblaze/kernel/ core-y += arch/microblaze/mm/ core-y += arch/microblaze/platform/ +core-$(CONFIG_PCI) += arch/microblaze/pci/ drivers-$(CONFIG_OPROFILE) += arch/microblaze/oprofile/ @@ -83,7 +84,7 @@ define archhelp echo '* linux.bin - Create raw binary' echo ' linux.bin.gz - Create compressed raw binary' echo ' simpleImage.<dt> - ELF image with $(arch)/boot/dts/<dt>.dts linked in' - echo ' - stripped elf with fdt blob + echo ' - stripped elf with fdt blob' echo ' simpleImage.<dt>.unstrip - full ELF image with fdt blob' echo ' *_defconfig - Select default config from arch/microblaze/configs' echo '' @@ -93,3 +94,5 @@ define archhelp echo ' name of a dts file from the arch/microblaze/boot/dts/ directory' echo ' (minus the .dts extension).' endef + +MRPROPER_FILES += $(boot)/simpleImage.* diff --git a/arch/microblaze/boot/Makefile b/arch/microblaze/boot/Makefile index 902cf9846c3..57f50c2371c 100644 --- a/arch/microblaze/boot/Makefile +++ b/arch/microblaze/boot/Makefile @@ -23,8 +23,6 @@ $(obj)/system.dtb: $(obj)/$(DTB).dtb endif $(obj)/linux.bin: vmlinux FORCE - [ -n $(CONFIG_INITRAMFS_SOURCE) ] && [ ! -e $(CONFIG_INITRAMFS_SOURCE) ] && \ - touch $(CONFIG_INITRAMFS_SOURCE) || echo "No CPIO image" $(call if_changed,objcopy) $(call if_changed,uimage) @echo 'Kernel: $@ is ready' ' (#'`cat .version`')' @@ -62,6 +60,4 @@ quiet_cmd_dtc = DTC $@ $(obj)/%.dtb: $(dtstree)/%.dts FORCE $(call if_changed,dtc) -clean-kernel += linux.bin linux.bin.gz simpleImage.* - -clean-files += *.dtb simpleImage.*.unstrip +clean-files += *.dtb simpleImage.*.unstrip linux.bin.ub diff --git a/arch/microblaze/configs/mmu_defconfig b/arch/microblaze/configs/mmu_defconfig index bb7c374713a..3c91cf6192c 100644 --- a/arch/microblaze/configs/mmu_defconfig +++ b/arch/microblaze/configs/mmu_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31 -# Thu Sep 24 10:28:50 2009 +# Linux kernel version: 2.6.34-rc6 +# Thu May 6 11:22:14 2010 # CONFIG_MICROBLAZE=y # CONFIG_SWAP is not set @@ -19,8 +19,10 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_CSUM=y -# CONFIG_PCI is not set -CONFIG_NO_DMA=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_DTC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -44,6 +46,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -51,7 +54,6 @@ CONFIG_RCU_FANOUT=32 CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=17 -# CONFIG_GROUP_SCHED is not set # CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y @@ -64,10 +66,12 @@ CONFIG_INITRAMFS_ROOT_GID=0 CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set # CONFIG_INITRAMFS_COMPRESSION_NONE is not set CONFIG_INITRAMFS_COMPRESSION_GZIP=y # CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set # CONFIG_INITRAMFS_COMPRESSION_LZMA is not set +# CONFIG_INITRAMFS_COMPRESSION_LZO is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -90,21 +94,22 @@ CONFIG_EVENTFD=y CONFIG_AIO=y # -# Performance Counters +# Kernel Performance Events And Counters # CONFIG_VM_EVENT_COUNTERS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling # -# CONFIG_SLOW_WORK is not set +CONFIG_SLOW_WORK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_BASE_SMALL=1 @@ -123,14 +128,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +# CONFIG_INLINE_READ_UNLOCK is not set +# CONFIG_INLINE_READ_UNLOCK_BH is not set +# CONFIG_INLINE_READ_UNLOCK_IRQ is not set +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +# CONFIG_INLINE_WRITE_UNLOCK is not set +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -139,11 +171,6 @@ CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_PLATFORM_GENERIC=y CONFIG_OPT_LIB_FUNCTION=y CONFIG_OPT_LIB_ASM=y -CONFIG_ALLOW_EDIT_AUTO=y - -# -# Automatic platform settings from Kconfig.auto -# # # Definitions for MICROBLAZE0 @@ -203,12 +230,11 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_SPLIT_PTLOCK_CPUS=999999 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # @@ -218,13 +244,20 @@ CONFIG_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set + +# +# Bus Options +# +# CONFIG_PCI is not set +# CONFIG_PCI_DOMAINS is not set +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_NET=y # # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set @@ -289,7 +322,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_WIRELESS is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -308,11 +347,17 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set +CONFIG_OF_FLATTREE=y CONFIG_OF_DEVICE=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 @@ -333,6 +378,7 @@ CONFIG_MISC_DEVICES=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_DMA is not set @@ -346,7 +392,27 @@ CONFIG_NETDEVICES=y # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_MICREL_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y # CONFIG_MII is not set # CONFIG_ETHOC is not set @@ -358,13 +424,14 @@ CONFIG_NET_ETHERNET=y # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set CONFIG_XILINX_EMACLITE=y CONFIG_NETDEV_1000=y CONFIG_NETDEV_10000=y CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -408,6 +475,8 @@ CONFIG_SERIAL_UARTLITE=y CONFIG_SERIAL_UARTLITE_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_TIMBERDALE is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -433,8 +502,13 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set # # Multifunction device drivers @@ -466,6 +540,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set @@ -526,8 +601,6 @@ CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set CONFIG_MISC_FILESYSTEMS=y @@ -538,6 +611,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +# CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -561,6 +635,7 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set CONFIG_CIFS=y CONFIG_CIFS_STATS=y CONFIG_CIFS_STATS2=y @@ -638,11 +713,13 @@ CONFIG_NLS_DEFAULT="iso8859-1" # # Kernel hacking # +CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -660,8 +737,12 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set CONFIG_DEBUG_SLAB=y # CONFIG_DEBUG_SLAB_LEAK is not set +# CONFIG_DEBUG_KMEMLEAK is not set CONFIG_DEBUG_SPINLOCK=y # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -680,10 +761,30 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set # CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set -# CONFIG_KMEMCHECK is not set CONFIG_EARLY_PRINTK=y # CONFIG_HEART_BEAT is not set CONFIG_DEBUG_BOOTMEM=y @@ -694,7 +795,11 @@ CONFIG_DEBUG_BOOTMEM=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # @@ -800,5 +905,6 @@ CONFIG_ZLIB_INFLATE=y CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y diff --git a/arch/microblaze/configs/nommu_defconfig b/arch/microblaze/configs/nommu_defconfig index adb839bab70..dd3a494257f 100644 --- a/arch/microblaze/configs/nommu_defconfig +++ b/arch/microblaze/configs/nommu_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31 -# Thu Sep 24 10:29:43 2009 +# Linux kernel version: 2.6.34-rc6 +# Thu May 6 11:25:12 2010 # CONFIG_MICROBLAZE=y # CONFIG_SWAP is not set @@ -19,8 +19,10 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_CSUM=y -# CONFIG_PCI is not set -CONFIG_NO_DMA=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_DTC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -46,6 +48,7 @@ CONFIG_BSD_PROCESS_ACCT_V3=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set @@ -53,7 +56,6 @@ CONFIG_RCU_FANOUT=32 CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=17 -# CONFIG_GROUP_SCHED is not set # CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y @@ -81,16 +83,18 @@ CONFIG_EVENTFD=y CONFIG_AIO=y # -# Performance Counters +# Kernel Performance Events And Counters # CONFIG_VM_EVENT_COUNTERS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_MMAP_ALLOW_UNINITIALIZED is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -116,14 +120,41 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # @@ -132,7 +163,10 @@ CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_PLATFORM_GENERIC=y # CONFIG_SELFMOD is not set # CONFIG_OPT_LIB_FUNCTION is not set -# CONFIG_ALLOW_EDIT_AUTO is not set + +# +# Definitions for MICROBLAZE0 +# CONFIG_KERNEL_BASE_ADDR=0x90000000 CONFIG_XILINX_MICROBLAZE0_FAMILY="virtex5" CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1 @@ -174,11 +208,14 @@ CONFIG_PROC_DEVICETREE=y # # Advanced setup # +# CONFIG_ADVANCED_OPTIONS is not set # # Default settings for advanced configuration options are used # +CONFIG_LOWMEM_SIZE=0x30000000 CONFIG_KERNEL_START=0x90000000 +CONFIG_TASK_SIZE=0x80000000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -190,7 +227,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1 # @@ -201,13 +237,20 @@ CONFIG_BINFMT_FLAT=y # CONFIG_BINFMT_SHARED_FLAT is not set # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set + +# +# Bus Options +# +# CONFIG_PCI is not set +# CONFIG_PCI_DOMAINS is not set +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_NET=y # # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set @@ -274,9 +317,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # @@ -301,9 +341,9 @@ CONFIG_STANDALONE=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_OF_PARTS is not set @@ -382,11 +422,16 @@ CONFIG_MTD_UCLINUX=y # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set +CONFIG_OF_FLATTREE=y CONFIG_OF_DEVICE=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# CONFIG_BLK_DEV_NBD=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 @@ -407,6 +452,7 @@ CONFIG_MISC_DEVICES=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_DMA is not set @@ -432,13 +478,14 @@ CONFIG_NET_ETHERNET=y # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y CONFIG_NETDEV_10000=y CONFIG_WLAN=y -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +# CONFIG_HOSTAP is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -482,6 +529,8 @@ CONFIG_SERIAL_UARTLITE=y CONFIG_SERIAL_UARTLITE_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_TIMBERDALE is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -508,8 +557,13 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set # # Multifunction device drivers @@ -559,6 +613,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set @@ -616,7 +671,6 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y -# CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set CONFIG_MISC_FILESYSTEMS=y @@ -628,6 +682,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set +# CONFIG_LOGFS is not set CONFIG_CRAMFS=y # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -656,6 +711,7 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -672,11 +728,13 @@ CONFIG_MSDOS_PARTITION=y # # Kernel hacking # +CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_UNUSED_SYMBOLS=y CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -695,12 +753,17 @@ CONFIG_DEBUG_OBJECTS=y CONFIG_DEBUG_OBJECTS_SELFTEST=y CONFIG_DEBUG_OBJECTS_FREE=y CONFIG_DEBUG_OBJECTS_TIMERS=y +# CONFIG_DEBUG_OBJECTS_WORK is not set CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1 # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -719,10 +782,32 @@ CONFIG_DEBUG_SG=y # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_EARLY_PRINTK=y # CONFIG_HEART_BEAT is not set @@ -734,7 +819,11 @@ CONFIG_EARLY_PRINTK=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # @@ -838,5 +927,6 @@ CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_ZLIB_INFLATE=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y diff --git a/arch/microblaze/include/asm/cache.h b/arch/microblaze/include/asm/cache.h index e52210891d7..4efe96a036f 100644 --- a/arch/microblaze/include/asm/cache.h +++ b/arch/microblaze/include/asm/cache.h @@ -15,7 +15,7 @@ #include <asm/registers.h> -#define L1_CACHE_SHIFT 2 +#define L1_CACHE_SHIFT 5 /* word-granular cache in microblaze */ #define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) diff --git a/arch/microblaze/include/asm/device.h b/arch/microblaze/include/asm/device.h index 78a038452c0..123b2fe72d0 100644 --- a/arch/microblaze/include/asm/device.h +++ b/arch/microblaze/include/asm/device.h @@ -12,25 +12,15 @@ struct device_node; struct dev_archdata { - /* Optional pointer to an OF device node */ - struct device_node *of_node; + /* DMA operations on that device */ + struct dma_map_ops *dma_ops; + void *dma_data; }; struct pdev_archdata { + u64 dma_mask; }; -static inline void dev_archdata_set_node(struct dev_archdata *ad, - struct device_node *np) -{ - ad->of_node = np; -} - -static inline struct device_node * -dev_archdata_get_node(const struct dev_archdata *ad) -{ - return ad->of_node; -} - #endif /* _ASM_MICROBLAZE_DEVICE_H */ diff --git a/arch/microblaze/include/asm/dma-mapping.h b/arch/microblaze/include/asm/dma-mapping.h index d00e4009916..18b3731c850 100644 --- a/arch/microblaze/include/asm/dma-mapping.h +++ b/arch/microblaze/include/asm/dma-mapping.h @@ -1 +1,153 @@ -#include <asm-generic/dma-mapping-broken.h> +/* + * Implements the generic device dma API for microblaze and the pci + * + * Copyright (C) 2009-2010 Michal Simek <monstr@monstr.eu> + * Copyright (C) 2009-2010 PetaLogix + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + * This file is base on powerpc and x86 dma-mapping.h versions + * Copyright (C) 2004 IBM + */ + +#ifndef _ASM_MICROBLAZE_DMA_MAPPING_H +#define _ASM_MICROBLAZE_DMA_MAPPING_H + +/* + * See Documentation/PCI/PCI-DMA-mapping.txt and + * Documentation/DMA-API.txt for documentation. + */ + +#include <linux/types.h> +#include <linux/cache.h> +#include <linux/mm.h> +#include <linux/scatterlist.h> +#include <linux/dma-debug.h> +#include <linux/dma-attrs.h> +#include <asm/io.h> +#include <asm-generic/dma-coherent.h> + +#define DMA_ERROR_CODE (~(dma_addr_t)0x0) + +#define __dma_alloc_coherent(dev, gfp, size, handle) NULL +#define __dma_free_coherent(size, addr) ((void)0) +#define __dma_sync(addr, size, rw) ((void)0) + +static inline unsigned long device_to_mask(struct device *dev) +{ + if (dev->dma_mask && *dev->dma_mask) + return *dev->dma_mask; + /* Assume devices without mask can take 32 bit addresses */ + return 0xfffffffful; +} + +extern struct dma_map_ops *dma_ops; + +/* + * Available generic sets of operations + */ +extern struct dma_map_ops dma_direct_ops; + +static inline struct dma_map_ops *get_dma_ops(struct device *dev) +{ + /* We don't handle the NULL dev case for ISA for now. We could + * do it via an out of line call but it is not needed for now. The + * only ISA DMA device we support is the floppy and we have a hack + * in the floppy driver directly to get a device for us. + */ + if (unlikely(!dev) || !dev->archdata.dma_ops) + return NULL; + + return dev->archdata.dma_ops; +} + +static inline void set_dma_ops(struct device *dev, struct dma_map_ops *ops) +{ + dev->archdata.dma_ops = ops; +} + +static inline int dma_supported(struct device *dev, u64 mask) +{ + struct dma_map_ops *ops = get_dma_ops(dev); + + if (unlikely(!ops)) + return 0; + if (!ops->dma_supported) + return 1; + return ops->dma_supported(dev, mask); +} + +#ifdef CONFIG_PCI +/* We have our own implementation of pci_set_dma_mask() */ +#define HAVE_ARCH_PCI_SET_DMA_MASK + +#endif + +static inline int dma_set_mask(struct device *dev, u64 dma_mask) +{ + struct dma_map_ops *ops = get_dma_ops(dev); + + if (unlikely(ops == NULL)) + return -EIO; + if (ops->set_dma_mask) + return ops->set_dma_mask(dev, dma_mask); + if (!dev->dma_mask || !dma_supported(dev, dma_mask)) + return -EIO; + *dev->dma_mask = dma_mask; + return 0; +} + +#include <asm-generic/dma-mapping-common.h> + +static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) +{ + struct dma_map_ops *ops = get_dma_ops(dev); + if (ops->mapping_error) + return ops->mapping_error(dev, dma_addr); + + return (dma_addr == DMA_ERROR_CODE); +} + +#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f) +#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h) +#define dma_is_consistent(d, h) (1) + +static inline void *dma_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t flag) +{ + struct dma_map_ops *ops = get_dma_ops(dev); + void *memory; + + BUG_ON(!ops); + + memory = ops->alloc_coherent(dev, size, dma_handle, flag); + + debug_dma_alloc_coherent(dev, size, *dma_handle, memory); + return memory; +} + +static inline void dma_free_coherent(struct device *dev, size_t size, + void *cpu_addr, dma_addr_t dma_handle) +{ + struct dma_map_ops *ops = get_dma_ops(dev); + + BUG_ON(!ops); + debug_dma_free_coherent(dev, size, cpu_addr, dma_handle); + ops->free_coherent(dev, size, cpu_addr, dma_handle); +} + +static inline int dma_get_cache_alignment(void) +{ + return L1_CACHE_BYTES; +} + +static inline void dma_cache_sync(struct device *dev, void *vaddr, size_t size, + enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); + __dma_sync(vaddr, size, (int)direction); +} + +#endif /* _ASM_MICROBLAZE_DMA_MAPPING_H */ diff --git a/arch/microblaze/include/asm/dma.h b/arch/microblaze/include/asm/dma.h index 08c073badf1..0d73d0c6de3 100644 --- a/arch/microblaze/include/asm/dma.h +++ b/arch/microblaze/include/asm/dma.h @@ -18,4 +18,10 @@ #define MAX_DMA_ADDRESS (CONFIG_KERNEL_START + memory_size - 1) #endif +#ifdef CONFIG_PCI +extern int isa_dma_bridge_buggy; +#else +#define isa_dma_bridge_buggy (0) +#endif + #endif /* _ASM_MICROBLAZE_DMA_H */ diff --git a/arch/microblaze/include/asm/entry.h b/arch/microblaze/include/asm/entry.h index 61abbd23264..ec89f2ad0fe 100644 --- a/arch/microblaze/include/asm/entry.h +++ b/arch/microblaze/include/asm/entry.h @@ -21,7 +21,7 @@ * places */ -#define PER_CPU(var) per_cpu__##var +#define PER_CPU(var) var # ifndef __ASSEMBLY__ DECLARE_PER_CPU(unsigned int, KSP); /* Saved kernel stack pointer */ diff --git a/arch/microblaze/include/asm/exceptions.h b/arch/microblaze/include/asm/exceptions.h index 90731df9e57..4c7b5d037c8 100644 --- a/arch/microblaze/include/asm/exceptions.h +++ b/arch/microblaze/include/asm/exceptions.h @@ -64,12 +64,6 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type, void die(const char *str, struct pt_regs *fp, long err); void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr); -#ifdef CONFIG_MMU -void __bug(const char *file, int line, void *data); -int bad_trap(int trap_num, struct pt_regs *regs); -int debug_trap(struct pt_regs *regs); -#endif /* CONFIG_MMU */ - #if defined(CONFIG_KGDB) void (*debugger)(struct pt_regs *regs); int (*debugger_bpt)(struct pt_regs *regs); diff --git a/arch/microblaze/include/asm/futex.h b/arch/microblaze/include/asm/futex.h index 8dbb6e7a03a..ad3fd61b2fe 100644 --- a/arch/microblaze/include/asm/futex.h +++ b/arch/microblaze/include/asm/futex.h @@ -55,7 +55,7 @@ futex_atomic_op_inuser(int encoded_op, int __user *uaddr) __futex_atomic_op("or %1,%0,%4;", ret, oldval, uaddr, oparg); break; case FUTEX_OP_ANDN: - __futex_atomic_op("and %1,%0,%4;", ret, oldval, uaddr, oparg); + __futex_atomic_op("andn %1,%0,%4;", ret, oldval, uaddr, oparg); break; case FUTEX_OP_XOR: __futex_atomic_op("xor %1,%0,%4;", ret, oldval, uaddr, oparg); diff --git a/arch/microblaze/include/asm/io.h b/arch/microblaze/include/asm/io.h index fc9997b73c0..00b5398d08c 100644 --- a/arch/microblaze/include/asm/io.h +++ b/arch/microblaze/include/asm/io.h @@ -15,7 +15,23 @@ #include <asm/page.h> #include <linux/types.h> #include <linux/mm.h> /* Get struct page {...} */ +#include <asm-generic/iomap.h> +#ifndef CONFIG_PCI +#define _IO_BASE 0 +#define _ISA_MEM_BASE 0 +#define PCI_DRAM_OFFSET 0 +#else +#define _IO_BASE isa_io_base +#define _ISA_MEM_BASE isa_mem_base +#define PCI_DRAM_OFFSET pci_dram_offset +#endif + +extern unsigned long isa_io_base; +extern unsigned long pci_io_base; +extern unsigned long pci_dram_offset; + +extern resource_size_t isa_mem_base; #define IO_SPACE_LIMIT (0xFFFFFFFF) @@ -92,6 +108,11 @@ static inline void writel(unsigned int v, volatile void __iomem *addr) #define iowrite16(v, addr) __raw_writew((u16)(v), (u16 *)(addr)) #define iowrite32(v, addr) __raw_writel((u32)(v), (u32 *)(addr)) +#define ioread16be(addr) __raw_readw((u16 *)(addr)) +#define ioread32be(addr) __raw_readl((u32 *)(addr)) +#define iowrite16be(v, addr) __raw_writew((u16)(v), (u16 *)(addr)) +#define iowrite32be(v, addr) __raw_writel((u32)(v), (u32 *)(addr)) + /* These are the definitions for the x86 IO instructions * inb/inw/inl/outb/outw/outl, the "string" versions * insb/insw/insl/outsb/outsw/outsl, and the "pausing" versions @@ -118,15 +139,10 @@ static inline void writel(unsigned int v, volatile void __iomem *addr) #ifdef CONFIG_MMU -#define mm_ptov(addr) ((void *)__phys_to_virt(addr)) -#define mm_vtop(addr) ((unsigned long)__virt_to_phys(addr)) #define phys_to_virt(addr) ((void *)__phys_to_virt(addr)) #define virt_to_phys(addr) ((unsigned long)__virt_to_phys(addr)) #define virt_to_bus(addr) ((unsigned long)__virt_to_phys(addr)) -#define __page_address(page) \ - (PAGE_OFFSET + (((page) - mem_map) << PAGE_SHIFT)) -#define page_to_phys(page) virt_to_phys((void *)__page_address(page)) #define page_to_bus(page) (page_to_phys(page)) #define bus_to_virt(addr) (phys_to_virt(addr)) @@ -217,7 +233,7 @@ static inline void __iomem *__ioremap(phys_addr_t address, unsigned long size, * Little endian */ -#define out_le32(a, v) __raw_writel(__cpu_to_le32(v), (a)); +#define out_le32(a, v) __raw_writel(__cpu_to_le32(v), (a)) #define out_le16(a, v) __raw_writew(__cpu_to_le16(v), (a)) #define in_le32(a) __le32_to_cpu(__raw_readl(a)) @@ -227,15 +243,7 @@ static inline void __iomem *__ioremap(phys_addr_t address, unsigned long size, #define out_8(a, v) __raw_writeb((v), (a)) #define in_8(a) __raw_readb(a) -/* FIXME */ -static inline void __iomem *ioport_map(unsigned long port, unsigned int len) -{ - return (void __iomem *) (port); -} - -static inline void ioport_unmap(void __iomem *addr) -{ - /* Nothing to do */ -} +#define ioport_map(port, nr) ((void __iomem *)(port)) +#define ioport_unmap(addr) #endif /* _ASM_MICROBLAZE_IO_H */ diff --git a/arch/microblaze/include/asm/irq.h b/arch/microblaze/include/asm/irq.h index 90f050535eb..31a35c33df6 100644 --- a/arch/microblaze/include/asm/irq.h +++ b/arch/microblaze/include/asm/irq.h @@ -14,6 +14,12 @@ #include <linux/interrupt.h> +/* This type is the placeholder for a hardware interrupt number. It has to + * be big enough to enclose whatever representation is used by a given + * platform. + */ +typedef unsigned long irq_hw_number_t; + extern unsigned int nr_irq; #define NO_IRQ (-1) @@ -21,7 +27,8 @@ extern unsigned int nr_irq; struct pt_regs; extern void do_IRQ(struct pt_regs *regs); -/* irq_of_parse_and_map - Parse and Map an interrupt into linux virq space +/** + * irq_of_parse_and_map - Parse and Map an interrupt into linux virq space * @device: Device node of the device whose interrupt is to be mapped * @index: Index of the interrupt to map * @@ -40,4 +47,32 @@ static inline void irq_dispose_mapping(unsigned int virq) return; } +struct irq_host; + +/** + * irq_create_mapping - Map a hardware interrupt into linux virq space + * @host: host owning this hardware interrupt or NULL for default host + * @hwirq: hardware irq number in that host space + * + * Only one mapping per hardware interrupt is permitted. Returns a linux + * virq number. + * If the sense/trigger is to be specified, set_irq_type() should be called + * on the number returned from that call. + */ +extern unsigned int irq_create_mapping(struct irq_host *host, + irq_hw_number_t hwirq); + +/** + * irq_create_of_mapping - Map a hardware interrupt into linux virq space + * @controller: Device node of the interrupt controller + * @inspec: Interrupt specifier from the device-tree + * @intsize: Size of the interrupt specifier from the device-tree + * + * This function is identical to irq_create_mapping except that it takes + * as input informations straight from the device-tree (typically the results + * of the of_irq_map_*() functions. + */ +extern unsigned int irq_create_of_mapping(struct device_node *controller, + u32 *intspec, unsigned int intsize); + #endif /* _ASM_MICROBLAZE_IRQ_H */ diff --git a/arch/microblaze/include/asm/of_device.h b/arch/microblaze/include/asm/of_device.h index ba917cfaefe..73cb9804098 100644 --- a/arch/microblaze/include/asm/of_device.h +++ b/arch/microblaze/include/asm/of_device.h @@ -21,9 +21,8 @@ * probed using OF properties. */ struct of_device { - struct device_node *node; /* to be obsoleted */ - u64 dma_mask; /* DMA mask */ struct device dev; /* Generic device interface */ + struct pdev_archdata archdata; }; extern ssize_t of_device_get_modalias(struct of_device *ofdev, diff --git a/arch/microblaze/include/asm/page.h b/arch/microblaze/include/asm/page.h index 9b66c0fa9a3..de493f86d28 100644 --- a/arch/microblaze/include/asm/page.h +++ b/arch/microblaze/include/asm/page.h @@ -31,6 +31,9 @@ #ifndef __ASSEMBLY__ +/* MS be sure that SLAB allocates aligned objects */ +#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES + #define PAGE_UP(addr) (((addr)+((PAGE_SIZE)-1))&(~((PAGE_SIZE)-1))) #define PAGE_DOWN(addr) ((addr)&(~((PAGE_SIZE)-1))) @@ -62,12 +65,6 @@ extern unsigned int __page_offset; #define PAGE_OFFSET CONFIG_KERNEL_START /* - * MAP_NR -- given an address, calculate the index of the page struct which - * points to the address's page. - */ -#define MAP_NR(addr) (((unsigned long)(addr) - PAGE_OFFSET) >> PAGE_SHIFT) - -/* * The basic type of a PTE - 32 bit physical addressing. */ typedef unsigned long pte_basic_t; @@ -76,14 +73,7 @@ typedef unsigned long pte_basic_t; #endif /* CONFIG_MMU */ -# ifndef CONFIG_MMU -# define copy_page(to, from) memcpy((to), (from), PAGE_SIZE) -# define get_user_page(vaddr) __get_free_page(GFP_KERNEL) -# define free_user_page(page, addr) free_page(addr) -# else /* CONFIG_MMU */ -extern void copy_page(void *to, void *from); -# endif /* CONFIG_MMU */ - +# define copy_page(to, from) memcpy((to), (from), PAGE_SIZE) # define clear_page(pgaddr) memset((pgaddr), 0, PAGE_SIZE) # define clear_user_page(pgaddr, vaddr, page) memset((pgaddr), 0, PAGE_SIZE) @@ -154,7 +144,11 @@ extern int page_is_ram(unsigned long pfn); # define pfn_to_virt(pfn) __va(pfn_to_phys((pfn))) # ifdef CONFIG_MMU -# define virt_to_page(kaddr) (mem_map + MAP_NR(kaddr)) + +# define virt_to_page(kaddr) (pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)) +# define page_to_virt(page) __va(page_to_pfn(page) << PAGE_SHIFT) +# define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT) + # else /* CONFIG_MMU */ # define virt_to_page(vaddr) (pfn_to_page(virt_to_pfn(vaddr))) # define page_to_virt(page) (pfn_to_virt(page_to_pfn(page))) diff --git a/arch/microblaze/include/asm/pci-bridge.h b/arch/microblaze/include/asm/pci-bridge.h index 7ad28f6f5f1..0c77cda9f5d 100644 --- a/arch/microblaze/include/asm/pci-bridge.h +++ b/arch/microblaze/include/asm/pci-bridge.h @@ -1 +1,196 @@ +#ifndef _ASM_MICROBLAZE_PCI_BRIDGE_H +#define _ASM_MICROBLAZE_PCI_BRIDGE_H +#ifdef __KERNEL__ +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ #include <linux/pci.h> +#include <linux/list.h> +#include <linux/ioport.h> + +struct device_node; + +enum { + /* Force re-assigning all resources (ignore firmware + * setup completely) + */ + PCI_REASSIGN_ALL_RSRC = 0x00000001, + + /* Re-assign all bus numbers */ + PCI_REASSIGN_ALL_BUS = 0x00000002, + + /* Do not try to assign, just use existing setup */ + PCI_PROBE_ONLY = 0x00000004, + + /* Don't bother with ISA alignment unless the bridge has + * ISA forwarding enabled + */ + PCI_CAN_SKIP_ISA_ALIGN = 0x00000008, + + /* Enable domain numbers in /proc */ + PCI_ENABLE_PROC_DOMAINS = 0x00000010, + /* ... except for domain 0 */ + PCI_COMPAT_DOMAIN_0 = 0x00000020, +}; + +/* + * Structure of a PCI controller (host bridge) + */ +struct pci_controller { + struct pci_bus *bus; + char is_dynamic; + struct device_node *dn; + struct list_head list_node; + struct device *parent; + + int first_busno; + int last_busno; + + int self_busno; + + void __iomem *io_base_virt; + resource_size_t io_base_phys; + + resource_size_t pci_io_size; + + /* Some machines (PReP) have a non 1:1 mapping of + * the PCI memory space in the CPU bus space + */ + resource_size_t pci_mem_offset; + + /* Some machines have a special region to forward the ISA + * "memory" cycles such as VGA memory regions. Left to 0 + * if unsupported + */ + resource_size_t isa_mem_phys; + resource_size_t isa_mem_size; + + struct pci_ops *ops; + unsigned int __iomem *cfg_addr; + void __iomem *cfg_data; + + /* + * Used for variants of PCI indirect handling and possible quirks: + * SET_CFG_TYPE - used on 4xx or any PHB that does explicit type0/1 + * EXT_REG - provides access to PCI-e extended registers + * SURPRESS_PRIMARY_BUS - we surpress the setting of PCI_PRIMARY_BUS + * on Freescale PCI-e controllers since they used the PCI_PRIMARY_BUS + * to determine which bus number to match on when generating type0 + * config cycles + * NO_PCIE_LINK - the Freescale PCI-e controllers have issues with + * hanging if we don't have link and try to do config cycles to + * anything but the PHB. Only allow talking to the PHB if this is + * set. + * BIG_ENDIAN - cfg_addr is a big endian register + * BROKEN_MRM - the 440EPx/GRx chips have an errata that causes hangs + * on the PLB4. Effectively disable MRM commands by setting this. + */ +#define INDIRECT_TYPE_SET_CFG_TYPE 0x00000001 +#define INDIRECT_TYPE_EXT_REG 0x00000002 +#define INDIRECT_TYPE_SURPRESS_PRIMARY_BUS 0x00000004 +#define INDIRECT_TYPE_NO_PCIE_LINK 0x00000008 +#define INDIRECT_TYPE_BIG_ENDIAN 0x00000010 +#define INDIRECT_TYPE_BROKEN_MRM 0x00000020 + u32 indirect_type; + + /* Currently, we limit ourselves to 1 IO range and 3 mem + * ranges since the common pci_bus structure can't handle more + */ + struct resource io_resource; + struct resource mem_resources[3]; + int global_number; /* PCI domain number */ +}; + +static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus) +{ + return bus->sysdata; +} + +static inline int isa_vaddr_is_ioport(void __iomem *address) +{ + /* No specific ISA handling on ppc32 at this stage, it + * all goes through PCI + */ + return 0; +} + +/* These are used for config access before all the PCI probing + has been done. */ +extern int early_read_config_byte(struct pci_controller *hose, int bus, + int dev_fn, int where, u8 *val); +extern int early_read_config_word(struct pci_controller *hose, int bus, + int dev_fn, int where, u16 *val); +extern int early_read_config_dword(struct pci_controller *hose, int bus, + int dev_fn, int where, u32 *val); +extern int early_write_config_byte(struct pci_controller *hose, int bus, + int dev_fn, int where, u8 val); +extern int early_write_config_word(struct pci_controller *hose, int bus, + int dev_fn, int where, u16 val); +extern int early_write_config_dword(struct pci_controller *hose, int bus, + int dev_fn, int where, u32 val); + +extern int early_find_capability(struct pci_controller *hose, int bus, + int dev_fn, int cap); + +extern void setup_indirect_pci(struct pci_controller *hose, + resource_size_t cfg_addr, + resource_size_t cfg_data, u32 flags); + +/* Get the PCI host controller for an OF device */ +extern struct pci_controller *pci_find_hose_for_OF_device( + struct device_node *node); + +/* Fill up host controller resources from the OF node */ +extern void pci_process_bridge_OF_ranges(struct pci_controller *hose, + struct device_node *dev, int primary); + +/* Allocate & free a PCI host bridge structure */ +extern struct pci_controller *pcibios_alloc_controller(struct device_node *dev); +extern void pcibios_free_controller(struct pci_controller *phb); +extern void pcibios_setup_phb_resources(struct pci_controller *hose); + +#ifdef CONFIG_PCI +extern unsigned int pci_flags; + +static inline void pci_set_flags(int flags) +{ + pci_flags = flags; +} + +static inline void pci_add_flags(int flags) +{ + pci_flags |= flags; +} + +static inline int pci_has_flag(int flag) +{ + return pci_flags & flag; +} + +extern struct list_head hose_list; + +extern unsigned long pci_address_to_pio(phys_addr_t address); +extern int pcibios_vaddr_is_ioport(void __iomem *address); +#else +static inline unsigned long pci_address_to_pio(phys_addr_t address) +{ + return (unsigned long)-1; +} +static inline int pcibios_vaddr_is_ioport(void __iomem *address) +{ + return 0; +} + +static inline void pci_set_flags(int flags) { } +static inline void pci_add_flags(int flags) { } +static inline int pci_has_flag(int flag) +{ + return 0; +} +#endif /* CONFIG_PCI */ + +#endif /* __KERNEL__ */ +#endif /* _ASM_MICROBLAZE_PCI_BRIDGE_H */ diff --git a/arch/microblaze/include/asm/pci.h b/arch/microblaze/include/asm/pci.h index 9f0df5faf2c..5a388eeeb28 100644 --- a/arch/microblaze/include/asm/pci.h +++ b/arch/microblaze/include/asm/pci.h @@ -1 +1,169 @@ -#include <asm-generic/pci.h> +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Based on powerpc version + */ + +#ifndef __ASM_MICROBLAZE_PCI_H +#define __ASM_MICROBLAZE_PCI_H +#ifdef __KERNEL__ + +#include <linux/types.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/dma-mapping.h> +#include <linux/pci.h> + +#include <asm/scatterlist.h> +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/pci-bridge.h> + +#define PCIBIOS_MIN_IO 0x1000 +#define PCIBIOS_MIN_MEM 0x10000000 + +struct pci_dev; + +/* Values for the `which' argument to sys_pciconfig_iobase syscall. */ +#define IOBASE_BRIDGE_NUMBER 0 +#define IOBASE_MEMORY 1 +#define IOBASE_IO 2 +#define IOBASE_ISA_IO 3 +#define IOBASE_ISA_MEM 4 + +#define pcibios_scan_all_fns(a, b) 0 + +/* + * Set this to 1 if you want the kernel to re-assign all PCI + * bus numbers (don't do that on ppc64 yet !) + */ +#define pcibios_assign_all_busses() \ + (pci_has_flag(PCI_REASSIGN_ALL_BUS)) + +static inline void pcibios_set_master(struct pci_dev *dev) +{ + /* No special bus mastering setup handling */ +} + +static inline void pcibios_penalize_isa_irq(int irq, int active) +{ + /* We don't do dynamic PCI IRQ allocation */ +} + +#ifdef CONFIG_PCI +extern void set_pci_dma_ops(struct dma_map_ops *dma_ops); +extern struct dma_map_ops *get_pci_dma_ops(void); +#else /* CONFIG_PCI */ +#define set_pci_dma_ops(d) +#define get_pci_dma_ops() NULL +#endif + +#ifdef CONFIG_PCI +static inline void pci_dma_burst_advice(struct pci_dev *pdev, + enum pci_dma_burst_strategy *strat, + unsigned long *strategy_parameter) +{ + *strat = PCI_DMA_BURST_INFINITY; + *strategy_parameter = ~0UL; +} +#endif + +extern int pci_domain_nr(struct pci_bus *bus); + +/* Decide whether to display the domain number in /proc */ +extern int pci_proc_domain(struct pci_bus *bus); + +struct vm_area_struct; +/* Map a range of PCI memory or I/O space for a device into user space */ +int pci_mmap_page_range(struct pci_dev *pdev, struct vm_area_struct *vma, + enum pci_mmap_state mmap_state, int write_combine); + +/* Tell drivers/pci/proc.c that we have pci_mmap_page_range() */ +#define HAVE_PCI_MMAP 1 + +extern int pci_legacy_read(struct pci_bus *bus, loff_t port, u32 *val, + size_t count); +extern int pci_legacy_write(struct pci_bus *bus, loff_t port, u32 val, + size_t count); +extern int pci_mmap_legacy_page_range(struct pci_bus *bus, + struct vm_area_struct *vma, + enum pci_mmap_state mmap_state); + +#define HAVE_PCI_LEGACY 1 + +/* The PCI address space does equal the physical memory + * address space (no IOMMU). The IDE and SCSI device layers use + * this boolean for bounce buffer decisions. + */ +#define PCI_DMA_BUS_IS_PHYS (1) + +extern void pcibios_resource_to_bus(struct pci_dev *dev, + struct pci_bus_region *region, + struct resource *res); + +extern void pcibios_bus_to_resource(struct pci_dev *dev, + struct resource *res, + struct pci_bus_region *region); + +static inline struct resource *pcibios_select_root(struct pci_dev *pdev, + struct resource *res) +{ + struct resource *root = NULL; + + if (res->flags & IORESOURCE_IO) + root = &ioport_resource; + if (res->flags & IORESOURCE_MEM) + root = &iomem_resource; + + return root; +} + +extern void pcibios_claim_one_bus(struct pci_bus *b); + +extern void pcibios_finish_adding_to_bus(struct pci_bus *bus); + +extern void pcibios_resource_survey(void); + +extern struct pci_controller *init_phb_dynamic(struct device_node *dn); +extern int remove_phb_dynamic(struct pci_controller *phb); + +extern struct pci_dev *of_create_pci_dev(struct device_node *node, + struct pci_bus *bus, int devfn); + +extern void of_scan_pci_bridge(struct device_node *node, + struct pci_dev *dev); + +extern void of_scan_bus(struct device_node *node, struct pci_bus *bus); +extern void of_rescan_bus(struct device_node *node, struct pci_bus *bus); + +extern int pci_read_irq_line(struct pci_dev *dev); + +extern int pci_bus_find_capability(struct pci_bus *bus, + unsigned int devfn, int cap); + +struct file; +extern pgprot_t pci_phys_mem_access_prot(struct file *file, + unsigned long pfn, + unsigned long size, + pgprot_t prot); + +#define HAVE_ARCH_PCI_RESOURCE_TO_USER +extern void pci_resource_to_user(const struct pci_dev *dev, int bar, + const struct resource *rsrc, + resource_size_t *start, resource_size_t *end); + +extern void pcibios_setup_bus_devices(struct pci_bus *bus); +extern void pcibios_setup_bus_self(struct pci_bus *bus); + +/* This part of code was originaly in xilinx-pci.h */ +#ifdef CONFIG_PCI_XILINX +extern void __init xilinx_pci_init(void); +#else +static inline void __init xilinx_pci_init(void) { return; } +#endif + +#endif /* __KERNEL__ */ +#endif /* __ASM_MICROBLAZE_PCI_H */ diff --git a/arch/microblaze/include/asm/pgalloc.h b/arch/microblaze/include/asm/pgalloc.h index 7547f506456..c614a893f8a 100644 --- a/arch/microblaze/include/asm/pgalloc.h +++ b/arch/microblaze/include/asm/pgalloc.h @@ -19,6 +19,7 @@ #include <asm/io.h> #include <asm/page.h> #include <asm/cache.h> +#include <asm/pgtable.h> #define PGDIR_ORDER 0 @@ -107,22 +108,7 @@ extern inline void free_pgd_slow(pgd_t *pgd) #define pmd_alloc_one_fast(mm, address) ({ BUG(); ((pmd_t *)1); }) #define pmd_alloc_one(mm, address) ({ BUG(); ((pmd_t *)2); }) -static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, - unsigned long address) -{ - pte_t *pte; - extern int mem_init_done; - extern void *early_get_page(void); - if (mem_init_done) { - pte = (pte_t *)__get_free_page(GFP_KERNEL | - __GFP_REPEAT | __GFP_ZERO); - } else { - pte = (pte_t *)early_get_page(); - if (pte) - clear_page(pte); - } - return pte; -} +extern pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr); static inline struct page *pte_alloc_one(struct mm_struct *mm, unsigned long address) diff --git a/arch/microblaze/include/asm/pgtable.h b/arch/microblaze/include/asm/pgtable.h index cc3a4dfc3ea..ca2d9287154 100644 --- a/arch/microblaze/include/asm/pgtable.h +++ b/arch/microblaze/include/asm/pgtable.h @@ -16,6 +16,10 @@ #define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \ remap_pfn_range(vma, vaddr, pfn, size, prot) +#ifndef __ASSEMBLY__ +extern int mem_init_done; +#endif + #ifndef CONFIG_MMU #define pgd_present(pgd) (1) /* pages are always present on non MMU */ @@ -51,6 +55,8 @@ static inline int pte_file(pte_t pte) { return 0; } #define arch_enter_lazy_cpu_mode() do {} while (0) +#define pgprot_noncached_wc(prot) prot + #else /* CONFIG_MMU */ #include <asm-generic/4level-fixup.h> @@ -68,7 +74,6 @@ static inline int pte_file(pte_t pte) { return 0; } extern unsigned long va_to_phys(unsigned long address); extern pte_t *va_to_pte(unsigned long address); -extern unsigned long ioremap_bot, ioremap_base; /* * The following only work if pte_present() is true. @@ -85,11 +90,25 @@ static inline pte_t pte_mkspecial(pte_t pte) { return pte; } #define VMALLOC_START (CONFIG_KERNEL_START + \ max(32 * 1024 * 1024UL, memory_size)) #define VMALLOC_END ioremap_bot -#define VMALLOC_VMADDR(x) ((unsigned long)(x)) #endif /* __ASSEMBLY__ */ /* + * Macro to mark a page protection value as "uncacheable". + */ + +#define _PAGE_CACHE_CTL (_PAGE_GUARDED | _PAGE_NO_CACHE | \ + _PAGE_WRITETHRU) + +#define pgprot_noncached(prot) \ + (__pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) | \ + _PAGE_NO_CACHE | _PAGE_GUARDED)) + +#define pgprot_noncached_wc(prot) \ + (__pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) | \ + _PAGE_NO_CACHE)) + +/* * The MicroBlaze MMU is identical to the PPC-40x MMU, and uses a hash * table containing PTEs, together with a set of 16 segment registers, to * define the virtual to physical address mapping. @@ -397,7 +416,7 @@ static inline unsigned long pte_update(pte_t *p, unsigned long clr, mts rmsr, %2\n\ nop" : "=&r" (old), "=&r" (tmp), "=&r" (msr), "=m" (*p) - : "r" ((unsigned long)(p+1) - 4), "r" (clr), "r" (set), "m" (*p) + : "r" ((unsigned long)(p + 1) - 4), "r" (clr), "r" (set), "m" (*p) : "cc"); return old; @@ -493,15 +512,6 @@ static inline pmd_t *pmd_offset(pgd_t *dir, unsigned long address) extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; /* - * When flushing the tlb entry for a page, we also need to flush the hash - * table entry. flush_hash_page is assembler (for speed) in hashtable.S. - */ -extern int flush_hash_page(unsigned context, unsigned long va, pte_t *ptep); - -/* Add an HPTE to the hash table */ -extern void add_hash_page(unsigned context, unsigned long va, pte_t *ptep); - -/* * Encode and decode a swap entry. * Note that the bits we use in a PTE for representing a swap entry * must not include the _PAGE_PRESENT bit, or the _PAGE_HASHPTE bit @@ -514,15 +524,7 @@ extern void add_hash_page(unsigned context, unsigned long va, pte_t *ptep); #define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) >> 2 }) #define __swp_entry_to_pte(x) ((pte_t) { (x).val << 2 }) - -/* CONFIG_APUS */ -/* For virtual address to physical address conversion */ -extern void cache_clear(__u32 addr, int length); -extern void cache_push(__u32 addr, int length); -extern int mm_end_of_chunk(unsigned long addr, int len); extern unsigned long iopa(unsigned long addr); -/* extern unsigned long mm_ptov(unsigned long addr) \ - __attribute__ ((const)); TBD */ /* Values for nocacheflag and cmode */ /* These are not used by the APUS kernel_map, but prevents @@ -533,18 +535,6 @@ extern unsigned long iopa(unsigned long addr); #define IOMAP_NOCACHE_NONSER 2 #define IOMAP_NO_COPYBACK 3 -/* - * Map some physical address range into the kernel address space. - */ -extern unsigned long kernel_map(unsigned long paddr, unsigned long size, - int nocacheflag, unsigned long *memavailp); - -/* - * Set cache mode of (kernel space) address range. - */ -extern void kernel_set_cachemode(unsigned long address, unsigned long size, - unsigned int cmode); - /* Needs to be defined here and not in linux/mm.h, as it is arch dependent */ #define kern_addr_valid(addr) (1) @@ -558,26 +548,15 @@ extern void kernel_set_cachemode(unsigned long address, unsigned long size, void do_page_fault(struct pt_regs *regs, unsigned long address, unsigned long error_code); -void __init io_block_mapping(unsigned long virt, phys_addr_t phys, - unsigned int size, int flags); - -void __init adjust_total_lowmem(void); void mapin_ram(void); int map_page(unsigned long va, phys_addr_t pa, int flags); extern int mem_init_done; -extern unsigned long ioremap_base; -extern unsigned long ioremap_bot; asmlinkage void __init mmu_init(void); void __init *early_get_page(void); -void *consistent_alloc(int gfp, size_t size, dma_addr_t *dma_handle); -void consistent_free(void *vaddr); -void consistent_sync(void *vaddr, size_t size, int direction); -void consistent_sync_page(struct page *page, unsigned long offset, - size_t size, int direction); #endif /* __ASSEMBLY__ */ #endif /* __KERNEL__ */ @@ -586,6 +565,14 @@ void consistent_sync_page(struct page *page, unsigned long offset, #ifndef __ASSEMBLY__ #include <asm-generic/pgtable.h> +extern unsigned long ioremap_bot, ioremap_base; + +void *consistent_alloc(int gfp, size_t size, dma_addr_t *dma_handle); +void consistent_free(size_t size, void *vaddr); +void consistent_sync(void *vaddr, size_t size, int direction); +void consistent_sync_page(struct page *page, unsigned long offset, + size_t size, int direction); + void setup_memory(void); #endif /* __ASSEMBLY__ */ diff --git a/arch/microblaze/include/asm/processor.h b/arch/microblaze/include/asm/processor.h index 563c6b9453f..8eeb09211ec 100644 --- a/arch/microblaze/include/asm/processor.h +++ b/arch/microblaze/include/asm/processor.h @@ -14,7 +14,6 @@ #include <asm/ptrace.h> #include <asm/setup.h> #include <asm/registers.h> -#include <asm/segment.h> #include <asm/entry.h> #include <asm/current.h> diff --git a/arch/microblaze/include/asm/prom.h b/arch/microblaze/include/asm/prom.h index ef3ec1d6ceb..e7d67a329bd 100644 --- a/arch/microblaze/include/asm/prom.h +++ b/arch/microblaze/include/asm/prom.h @@ -26,30 +26,25 @@ #include <asm/irq.h> #include <asm/atomic.h> -#define OF_ROOT_NODE_ADDR_CELLS_DEFAULT 1 -#define OF_ROOT_NODE_SIZE_CELLS_DEFAULT 1 - -#define of_compat_cmp(s1, s2, l) strncasecmp((s1), (s2), (l)) -#define of_prop_cmp(s1, s2) strcmp((s1), (s2)) -#define of_node_cmp(s1, s2) strcasecmp((s1), (s2)) - -extern struct device_node *of_chosen; - #define HAVE_ARCH_DEVTREE_FIXUPS -extern struct device_node *allnodes; /* temporary while merging */ -extern rwlock_t devtree_lock; /* temporary while merging */ - -/* For updating the device tree at runtime */ -extern void of_attach_node(struct device_node *); -extern void of_detach_node(struct device_node *); - /* Other Prototypes */ extern int early_uartlite_console(void); -extern struct resource *request_OF_resource(struct device_node *node, - int index, const char *name_postfix); -extern int release_OF_resource(struct device_node *node, int index); +#ifdef CONFIG_PCI +/* + * PCI <-> OF matching functions + * (XXX should these be here?) + */ +struct pci_bus; +struct pci_dev; +extern int pci_device_from_OF_node(struct device_node *node, + u8 *bus, u8 *devfn); +extern struct device_node *pci_busdev_to_OF_node(struct pci_bus *bus, + int devfn); +extern struct device_node *pci_device_to_OF_node(struct pci_dev *dev); +extern void pci_create_OF_bus_map(void); +#endif /* * OF address retreival & translation diff --git a/arch/microblaze/include/asm/scatterlist.h b/arch/microblaze/include/asm/scatterlist.h index 35d786fe93a..dc4a8900cc8 100644 --- a/arch/microblaze/include/asm/scatterlist.h +++ b/arch/microblaze/include/asm/scatterlist.h @@ -1 +1,3 @@ #include <asm-generic/scatterlist.h> + +#define ISA_DMA_THRESHOLD (~0UL) diff --git a/arch/microblaze/include/asm/segment.h b/arch/microblaze/include/asm/segment.h deleted file mode 100644 index 0e7102c3fb1..00000000000 --- a/arch/microblaze/include/asm/segment.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu> - * Copyright (C) 2008-2009 PetaLogix - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_SEGMENT_H -#define _ASM_MICROBLAZE_SEGMENT_H - -# ifndef __ASSEMBLY__ - -typedef struct { - unsigned long seg; -} mm_segment_t; - -/* - * On Microblaze the fs value is actually the top of the corresponding - * address space. - * - * The fs value determines whether argument validity checking should be - * performed or not. If get_fs() == USER_DS, checking is performed, with - * get_fs() == KERNEL_DS, checking is bypassed. - * - * For historical reasons, these macros are grossly misnamed. - * - * For non-MMU arch like Microblaze, KERNEL_DS and USER_DS is equal. - */ -# define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) - -# ifndef CONFIG_MMU -# define KERNEL_DS MAKE_MM_SEG(0) -# define USER_DS KERNEL_DS -# else -# define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFF) -# define USER_DS MAKE_MM_SEG(TASK_SIZE - 1) -# endif - -# define get_ds() (KERNEL_DS) -# define get_fs() (current_thread_info()->addr_limit) -# define set_fs(val) (current_thread_info()->addr_limit = (val)) - -# define segment_eq(a, b) ((a).seg == (b).seg) - -# endif /* __ASSEMBLY__ */ -#endif /* _ASM_MICROBLAZE_SEGMENT_H */ diff --git a/arch/microblaze/include/asm/system.h b/arch/microblaze/include/asm/system.h index 157970688b2..48c4f0335e3 100644 --- a/arch/microblaze/include/asm/system.h +++ b/arch/microblaze/include/asm/system.h @@ -12,6 +12,7 @@ #include <asm/registers.h> #include <asm/setup.h> #include <asm/irqflags.h> +#include <asm/cache.h> #include <asm-generic/cmpxchg.h> #include <asm-generic/cmpxchg-local.h> @@ -87,10 +88,23 @@ void free_initmem(void); extern char *klimit; extern void ret_from_fork(void); +extern void *alloc_maybe_bootmem(size_t size, gfp_t mask); +extern void *zalloc_maybe_bootmem(size_t size, gfp_t mask); + #ifdef CONFIG_DEBUG_FS extern struct dentry *of_debugfs_root; #endif #define arch_align_stack(x) (x) +/* + * MicroBlaze doesn't handle unaligned accesses in hardware. + * + * Based on this we force the IP header alignment in network drivers. + * We also modify NET_SKB_PAD to be a cacheline in size, thus maintaining + * cacheline alignment of buffers. + */ +#define NET_IP_ALIGN 2 +#define NET_SKB_PAD L1_CACHE_BYTES + #endif /* _ASM_MICROBLAZE_SYSTEM_H */ diff --git a/arch/microblaze/include/asm/thread_info.h b/arch/microblaze/include/asm/thread_info.h index 6e92885d381..8a8e9fc6e0c 100644 --- a/arch/microblaze/include/asm/thread_info.h +++ b/arch/microblaze/include/asm/thread_info.h @@ -19,7 +19,6 @@ #ifndef __ASSEMBLY__ # include <linux/types.h> # include <asm/processor.h> -# include <asm/segment.h> /* * low level task data that entry.S needs immediate access to @@ -60,6 +59,10 @@ struct cpu_context { __u32 fsr; }; +typedef struct { + unsigned long seg; +} mm_segment_t; + struct thread_info { struct task_struct *task; /* main task structure */ struct exec_domain *exec_domain; /* execution domain */ @@ -119,7 +122,7 @@ static inline struct thread_info *current_thread_info(void) /* restore singlestep on return to user mode */ #define TIF_SINGLESTEP 4 #define TIF_IRET 5 /* return with iret */ -#define TIF_MEMDIE 6 +#define TIF_MEMDIE 6 /* is terminating due to OOM killer */ #define TIF_SYSCALL_AUDIT 9 /* syscall auditing active */ #define TIF_SECCOMP 10 /* secure computing */ #define TIF_FREEZE 14 /* Freezing for suspend */ diff --git a/arch/microblaze/include/asm/tlbflush.h b/arch/microblaze/include/asm/tlbflush.h index eb31a0e8a77..2e1353c2d18 100644 --- a/arch/microblaze/include/asm/tlbflush.h +++ b/arch/microblaze/include/asm/tlbflush.h @@ -23,7 +23,8 @@ extern void _tlbie(unsigned long address); extern void _tlbia(void); -#define __tlbia() _tlbia() +#define __tlbia() { preempt_disable(); _tlbia(); preempt_enable(); } +#define __tlbie(x) { _tlbie(x); } static inline void local_flush_tlb_all(void) { __tlbia(); } @@ -31,14 +32,14 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm) { __tlbia(); } static inline void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr) - { _tlbie(vmaddr); } + { __tlbie(vmaddr); } static inline void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end) { __tlbia(); } #define flush_tlb_kernel_range(start, end) do { } while (0) -#define update_mmu_cache(vma, addr, pte) do { } while (0) +#define update_mmu_cache(vma, addr, ptep) do { } while (0) #define flush_tlb_all local_flush_tlb_all #define flush_tlb_mm local_flush_tlb_mm diff --git a/arch/microblaze/include/asm/uaccess.h b/arch/microblaze/include/asm/uaccess.h index 371bd6e56d9..26460d15b33 100644 --- a/arch/microblaze/include/asm/uaccess.h +++ b/arch/microblaze/include/asm/uaccess.h @@ -22,101 +22,73 @@ #include <asm/mmu.h> #include <asm/page.h> #include <asm/pgtable.h> -#include <asm/segment.h> #include <linux/string.h> #define VERIFY_READ 0 #define VERIFY_WRITE 1 -#define __clear_user(addr, n) (memset((void *)(addr), 0, (n)), 0) - -#ifndef CONFIG_MMU - -extern int ___range_ok(unsigned long addr, unsigned long size); - -#define __range_ok(addr, size) \ - ___range_ok((unsigned long)(addr), (unsigned long)(size)) - -#define access_ok(type, addr, size) (__range_ok((addr), (size)) == 0) -#define __access_ok(add, size) (__range_ok((addr), (size)) == 0) - -/* Undefined function to trigger linker error */ -extern int bad_user_access_length(void); - -/* FIXME this is function for optimalization -> memcpy */ -#define __get_user(var, ptr) \ -({ \ - int __gu_err = 0; \ - switch (sizeof(*(ptr))) { \ - case 1: \ - case 2: \ - case 4: \ - (var) = *(ptr); \ - break; \ - case 8: \ - memcpy((void *) &(var), (ptr), 8); \ - break; \ - default: \ - (var) = 0; \ - __gu_err = __get_user_bad(); \ - break; \ - } \ - __gu_err; \ -}) +/* + * On Microblaze the fs value is actually the top of the corresponding + * address space. + * + * The fs value determines whether argument validity checking should be + * performed or not. If get_fs() == USER_DS, checking is performed, with + * get_fs() == KERNEL_DS, checking is bypassed. + * + * For historical reasons, these macros are grossly misnamed. + * + * For non-MMU arch like Microblaze, KERNEL_DS and USER_DS is equal. + */ +# define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) -#define __get_user_bad() (bad_user_access_length(), (-EFAULT)) +# ifndef CONFIG_MMU +# define KERNEL_DS MAKE_MM_SEG(0) +# define USER_DS KERNEL_DS +# else +# define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFF) +# define USER_DS MAKE_MM_SEG(TASK_SIZE - 1) +# endif -/* FIXME is not there defined __pu_val */ -#define __put_user(var, ptr) \ -({ \ - int __pu_err = 0; \ - switch (sizeof(*(ptr))) { \ - case 1: \ - case 2: \ - case 4: \ - *(ptr) = (var); \ - break; \ - case 8: { \ - typeof(*(ptr)) __pu_val = (var); \ - memcpy(ptr, &__pu_val, sizeof(__pu_val)); \ - } \ - break; \ - default: \ - __pu_err = __put_user_bad(); \ - break; \ - } \ - __pu_err; \ -}) +# define get_ds() (KERNEL_DS) +# define get_fs() (current_thread_info()->addr_limit) +# define set_fs(val) (current_thread_info()->addr_limit = (val)) -#define __put_user_bad() (bad_user_access_length(), (-EFAULT)) +# define segment_eq(a, b) ((a).seg == (b).seg) -#define put_user(x, ptr) __put_user((x), (ptr)) -#define get_user(x, ptr) __get_user((x), (ptr)) +/* + * The exception table consists of pairs of addresses: the first is the + * address of an instruction that is allowed to fault, and the second is + * the address at which the program should continue. No registers are + * modified, so it is entirely up to the continuation code to figure out + * what to do. + * + * All the routines below use bits of fixup code that are out of line + * with the main instruction path. This means when everything is well, + * we don't even have to jump over them. Further, they do not intrude + * on our cache or tlb entries. + */ +struct exception_table_entry { + unsigned long insn, fixup; +}; -#define copy_to_user(to, from, n) (memcpy((to), (from), (n)), 0) -#define copy_from_user(to, from, n) (memcpy((to), (from), (n)), 0) +/* Returns 0 if exception not found and fixup otherwise. */ +extern unsigned long search_exception_table(unsigned long); -#define __copy_to_user(to, from, n) (copy_to_user((to), (from), (n))) -#define __copy_from_user(to, from, n) (copy_from_user((to), (from), (n))) -#define __copy_to_user_inatomic(to, from, n) \ - (__copy_to_user((to), (from), (n))) -#define __copy_from_user_inatomic(to, from, n) \ - (__copy_from_user((to), (from), (n))) +#ifndef CONFIG_MMU -static inline unsigned long clear_user(void *addr, unsigned long size) +/* Check against bounds of physical memory */ +static inline int ___range_ok(unsigned long addr, unsigned long size) { - if (access_ok(VERIFY_WRITE, addr, size)) - size = __clear_user(addr, size); - return size; + return ((addr < memory_start) || + ((addr + size) > memory_end)); } -/* Returns 0 if exception not found and fixup otherwise. */ -extern unsigned long search_exception_table(unsigned long); +#define __range_ok(addr, size) \ + ___range_ok((unsigned long)(addr), (unsigned long)(size)) -extern long strncpy_from_user(char *dst, const char *src, long count); -extern long strnlen_user(const char *src, long count); +#define access_ok(type, addr, size) (__range_ok((addr), (size)) == 0) -#else /* CONFIG_MMU */ +#else /* * Address is valid if: @@ -129,22 +101,119 @@ extern long strnlen_user(const char *src, long count); /* || printk("access_ok failed for %s at 0x%08lx (size %d), seg 0x%08x\n", type?"WRITE":"READ",addr,size,get_fs().seg)) */ -/* - * All the __XXX versions macros/functions below do not perform - * access checking. It is assumed that the necessary checks have been - * already performed before the finction (macro) is called. - */ +#endif -#define get_user(x, ptr) \ -({ \ - access_ok(VERIFY_READ, (ptr), sizeof(*(ptr))) \ - ? __get_user((x), (ptr)) : -EFAULT; \ +#ifdef CONFIG_MMU +# define __FIXUP_SECTION ".section .fixup,\"ax\"\n" +# define __EX_TABLE_SECTION ".section __ex_table,\"a\"\n" +#else +# define __FIXUP_SECTION ".section .discard,\"ax\"\n" +# define __EX_TABLE_SECTION ".section .discard,\"a\"\n" +#endif + +extern unsigned long __copy_tofrom_user(void __user *to, + const void __user *from, unsigned long size); + +/* Return: number of not copied bytes, i.e. 0 if OK or non-zero if fail. */ +static inline unsigned long __must_check __clear_user(void __user *to, + unsigned long n) +{ + /* normal memset with two words to __ex_table */ + __asm__ __volatile__ ( \ + "1: sb r0, %2, r0;" \ + " addik %0, %0, -1;" \ + " bneid %0, 1b;" \ + " addik %2, %2, 1;" \ + "2: " \ + __EX_TABLE_SECTION \ + ".word 1b,2b;" \ + ".previous;" \ + : "=r"(n) \ + : "0"(n), "r"(to) + ); + return n; +} + +static inline unsigned long __must_check clear_user(void __user *to, + unsigned long n) +{ + might_sleep(); + if (unlikely(!access_ok(VERIFY_WRITE, to, n))) + return n; + + return __clear_user(to, n); +} + +/* put_user and get_user macros */ +extern long __user_bad(void); + +#define __get_user_asm(insn, __gu_ptr, __gu_val, __gu_err) \ +({ \ + __asm__ __volatile__ ( \ + "1:" insn " %1, %2, r0;" \ + " addk %0, r0, r0;" \ + "2: " \ + __FIXUP_SECTION \ + "3: brid 2b;" \ + " addik %0, r0, %3;" \ + ".previous;" \ + __EX_TABLE_SECTION \ + ".word 1b,3b;" \ + ".previous;" \ + : "=&r"(__gu_err), "=r"(__gu_val) \ + : "r"(__gu_ptr), "i"(-EFAULT) \ + ); \ }) -#define put_user(x, ptr) \ +/** + * get_user: - Get a simple variable from user space. + * @x: Variable to store result. + * @ptr: Source address, in user space. + * + * Context: User context only. This function may sleep. + * + * This macro copies a single simple variable from user space to kernel + * space. It supports simple types like char and int, but not larger + * data types like structures or arrays. + * + * @ptr must have pointer-to-simple-variable type, and the result of + * dereferencing @ptr must be assignable to @x without a cast. + * + * Returns zero on success, or -EFAULT on error. + * On error, the variable @x is set to zero. + */ +#define get_user(x, ptr) \ + __get_user_check((x), (ptr), sizeof(*(ptr))) + +#define __get_user_check(x, ptr, size) \ ({ \ - access_ok(VERIFY_WRITE, (ptr), sizeof(*(ptr))) \ - ? __put_user((x), (ptr)) : -EFAULT; \ + unsigned long __gu_val = 0; \ + const typeof(*(ptr)) __user *__gu_addr = (ptr); \ + int __gu_err = 0; \ + \ + if (access_ok(VERIFY_READ, __gu_addr, size)) { \ + switch (size) { \ + case 1: \ + __get_user_asm("lbu", __gu_addr, __gu_val, \ + __gu_err); \ + break; \ + case 2: \ + __get_user_asm("lhu", __gu_addr, __gu_val, \ + __gu_err); \ + break; \ + case 4: \ + __get_user_asm("lw", __gu_addr, __gu_val, \ + __gu_err); \ + break; \ + default: \ + __gu_err = __user_bad(); \ + break; \ + } \ + } else { \ + __gu_err = -EFAULT; \ + } \ + x = (typeof(*(ptr)))__gu_val; \ + __gu_err; \ }) #define __get_user(x, ptr) \ @@ -163,28 +232,102 @@ extern long strnlen_user(const char *src, long count); __get_user_asm("lw", (ptr), __gu_val, __gu_err); \ break; \ default: \ - __gu_val = 0; __gu_err = -EINVAL; \ + /* __gu_val = 0; __gu_err = -EINVAL;*/ __gu_err = __user_bad();\ } \ x = (__typeof__(*(ptr))) __gu_val; \ __gu_err; \ }) -#define __get_user_asm(insn, __gu_ptr, __gu_val, __gu_err) \ + +#define __put_user_asm(insn, __gu_ptr, __gu_val, __gu_err) \ +({ \ + __asm__ __volatile__ ( \ + "1:" insn " %1, %2, r0;" \ + " addk %0, r0, r0;" \ + "2: " \ + __FIXUP_SECTION \ + "3: brid 2b;" \ + " addik %0, r0, %3;" \ + ".previous;" \ + __EX_TABLE_SECTION \ + ".word 1b,3b;" \ + ".previous;" \ + : "=&r"(__gu_err) \ + : "r"(__gu_val), "r"(__gu_ptr), "i"(-EFAULT) \ + ); \ +}) + +#define __put_user_asm_8(__gu_ptr, __gu_val, __gu_err) \ +({ \ + __asm__ __volatile__ (" lwi %0, %1, 0;" \ + "1: swi %0, %2, 0;" \ + " lwi %0, %1, 4;" \ + "2: swi %0, %2, 4;" \ + " addk %0, r0, r0;" \ + "3: " \ + __FIXUP_SECTION \ + "4: brid 3b;" \ + " addik %0, r0, %3;" \ + ".previous;" \ + __EX_TABLE_SECTION \ + ".word 1b,4b,2b,4b;" \ + ".previous;" \ + : "=&r"(__gu_err) \ + : "r"(&__gu_val), "r"(__gu_ptr), "i"(-EFAULT) \ + ); \ +}) + +/** + * put_user: - Write a simple value into user space. + * @x: Value to copy to user space. + * @ptr: Destination address, in user space. + * + * Context: User context only. This function may sleep. + * + * This macro copies a single simple value from kernel space to user + * space. It supports simple types like char and int, but not larger + * data types like structures or arrays. + * + * @ptr must have pointer-to-simple-variable type, and @x must be assignable + * to the result of dereferencing @ptr. + * + * Returns zero on success, or -EFAULT on error. + */ +#define put_user(x, ptr) \ + __put_user_check((x), (ptr), sizeof(*(ptr))) + +#define __put_user_check(x, ptr, size) \ ({ \ - __asm__ __volatile__ ( \ - "1:" insn " %1, %2, r0; \ - addk %0, r0, r0; \ - 2: \ - .section .fixup,\"ax\"; \ - 3: brid 2b; \ - addik %0, r0, %3; \ - .previous; \ - .section __ex_table,\"a\"; \ - .word 1b,3b; \ - .previous;" \ - : "=r"(__gu_err), "=r"(__gu_val) \ - : "r"(__gu_ptr), "i"(-EFAULT) \ - ); \ + typeof(*(ptr)) __pu_val; \ + typeof(*(ptr)) __user *__pu_addr = (ptr); \ + int __pu_err = 0; \ + \ + __pu_val = (x); \ + if (access_ok(VERIFY_WRITE, __pu_addr, size)) { \ + switch (size) { \ + case 1: \ + __put_user_asm("sb", __pu_addr, __pu_val, \ + __pu_err); \ + break; \ + case 2: \ + __put_user_asm("sh", __pu_addr, __pu_val, \ + __pu_err); \ + break; \ + case 4: \ + __put_user_asm("sw", __pu_addr, __pu_val, \ + __pu_err); \ + break; \ + case 8: \ + __put_user_asm_8(__pu_addr, __pu_val, __pu_err);\ + break; \ + default: \ + __pu_err = __user_bad(); \ + break; \ + } \ + } else { \ + __pu_err = -EFAULT; \ + } \ + __pu_err; \ }) #define __put_user(x, ptr) \ @@ -195,7 +338,7 @@ extern long strnlen_user(const char *src, long count); case 1: \ __put_user_asm("sb", (ptr), __gu_val, __gu_err); \ break; \ - case 2: \ + case 2: \ __put_user_asm("sh", (ptr), __gu_val, __gu_err); \ break; \ case 4: \ @@ -205,121 +348,70 @@ extern long strnlen_user(const char *src, long count); __put_user_asm_8((ptr), __gu_val, __gu_err); \ break; \ default: \ - __gu_err = -EINVAL; \ + /*__gu_err = -EINVAL;*/ __gu_err = __user_bad(); \ } \ __gu_err; \ }) -#define __put_user_asm_8(__gu_ptr, __gu_val, __gu_err) \ -({ \ -__asm__ __volatile__ (" lwi %0, %1, 0; \ - 1: swi %0, %2, 0; \ - lwi %0, %1, 4; \ - 2: swi %0, %2, 4; \ - addk %0,r0,r0; \ - 3: \ - .section .fixup,\"ax\"; \ - 4: brid 3b; \ - addik %0, r0, %3; \ - .previous; \ - .section __ex_table,\"a\"; \ - .word 1b,4b,2b,4b; \ - .previous;" \ - : "=&r"(__gu_err) \ - : "r"(&__gu_val), \ - "r"(__gu_ptr), "i"(-EFAULT) \ - ); \ -}) - -#define __put_user_asm(insn, __gu_ptr, __gu_val, __gu_err) \ -({ \ - __asm__ __volatile__ ( \ - "1:" insn " %1, %2, r0; \ - addk %0, r0, r0; \ - 2: \ - .section .fixup,\"ax\"; \ - 3: brid 2b; \ - addik %0, r0, %3; \ - .previous; \ - .section __ex_table,\"a\"; \ - .word 1b,3b; \ - .previous;" \ - : "=r"(__gu_err) \ - : "r"(__gu_val), "r"(__gu_ptr), "i"(-EFAULT) \ - ); \ -}) -/* - * Return: number of not copied bytes, i.e. 0 if OK or non-zero if fail. - */ -static inline int clear_user(char *to, int size) -{ - if (size && access_ok(VERIFY_WRITE, to, size)) { - __asm__ __volatile__ (" \ - 1: \ - sb r0, %2, r0; \ - addik %0, %0, -1; \ - bneid %0, 1b; \ - addik %2, %2, 1; \ - 2: \ - .section __ex_table,\"a\"; \ - .word 1b,2b; \ - .section .text;" \ - : "=r"(size) \ - : "0"(size), "r"(to) - ); - } - return size; -} - -#define __copy_from_user(to, from, n) copy_from_user((to), (from), (n)) +/* copy_to_from_user */ +#define __copy_from_user(to, from, n) \ + __copy_tofrom_user((__force void __user *)(to), \ + (void __user *)(from), (n)) #define __copy_from_user_inatomic(to, from, n) \ copy_from_user((to), (from), (n)) -#define copy_to_user(to, from, n) \ - (access_ok(VERIFY_WRITE, (to), (n)) ? \ - __copy_tofrom_user((void __user *)(to), \ - (__force const void __user *)(from), (n)) \ - : -EFAULT) +static inline long copy_from_user(void *to, + const void __user *from, unsigned long n) +{ + might_sleep(); + if (access_ok(VERIFY_READ, from, n)) + return __copy_from_user(to, from, n); + return n; +} -#define __copy_to_user(to, from, n) copy_to_user((to), (from), (n)) +#define __copy_to_user(to, from, n) \ + __copy_tofrom_user((void __user *)(to), \ + (__force const void __user *)(from), (n)) #define __copy_to_user_inatomic(to, from, n) copy_to_user((to), (from), (n)) -#define copy_from_user(to, from, n) \ - (access_ok(VERIFY_READ, (from), (n)) ? \ - __copy_tofrom_user((__force void __user *)(to), \ - (void __user *)(from), (n)) \ - : -EFAULT) +static inline long copy_to_user(void __user *to, + const void *from, unsigned long n) +{ + might_sleep(); + if (access_ok(VERIFY_WRITE, to, n)) + return __copy_to_user(to, from, n); + return n; +} +/* + * Copy a null terminated string from userspace. + */ extern int __strncpy_user(char *to, const char __user *from, int len); -extern int __strnlen_user(const char __user *sstr, int len); - -#define strncpy_from_user(to, from, len) \ - (access_ok(VERIFY_READ, from, 1) ? \ - __strncpy_user(to, from, len) : -EFAULT) -#define strnlen_user(str, len) \ - (access_ok(VERIFY_READ, str, 1) ? __strnlen_user(str, len) : 0) -#endif /* CONFIG_MMU */ +#define __strncpy_from_user __strncpy_user -extern unsigned long __copy_tofrom_user(void __user *to, - const void __user *from, unsigned long size); +static inline long +strncpy_from_user(char *dst, const char __user *src, long count) +{ + if (!access_ok(VERIFY_READ, src, 1)) + return -EFAULT; + return __strncpy_from_user(dst, src, count); +} /* - * The exception table consists of pairs of addresses: the first is the - * address of an instruction that is allowed to fault, and the second is - * the address at which the program should continue. No registers are - * modified, so it is entirely up to the continuation code to figure out - * what to do. + * Return the size of a string (including the ending 0) * - * All the routines below use bits of fixup code that are out of line - * with the main instruction path. This means when everything is well, - * we don't even have to jump over them. Further, they do not intrude - * on our cache or tlb entries. + * Return 0 on exception, a value greater than N if too long */ -struct exception_table_entry { - unsigned long insn, fixup; -}; +extern int __strnlen_user(const char __user *sstr, int len); + +static inline long strnlen_user(const char __user *src, long n) +{ + if (!access_ok(VERIFY_READ, src, 1)) + return 0; + return __strnlen_user(src, n); +} #endif /* __ASSEMBLY__ */ #endif /* __KERNEL__ */ diff --git a/arch/microblaze/kernel/Makefile b/arch/microblaze/kernel/Makefile index b07594eccf9..e51bc152082 100644 --- a/arch/microblaze/kernel/Makefile +++ b/arch/microblaze/kernel/Makefile @@ -14,7 +14,7 @@ endif extra-y := head.o vmlinux.lds -obj-y += exceptions.o \ +obj-y += dma.o exceptions.o \ hw_exception_handler.o init_task.o intc.o irq.o of_device.o \ of_platform.o process.o prom.o prom_parse.o ptrace.o \ setup.o signal.o sys_microblaze.o timer.o traps.o reset.o diff --git a/arch/microblaze/kernel/asm-offsets.c b/arch/microblaze/kernel/asm-offsets.c index 7bc7b68f97d..c1b459c9757 100644 --- a/arch/microblaze/kernel/asm-offsets.c +++ b/arch/microblaze/kernel/asm-offsets.c @@ -16,6 +16,7 @@ #include <linux/hardirq.h> #include <linux/thread_info.h> #include <linux/kbuild.h> +#include <asm/cpuinfo.h> int main(int argc, char *argv[]) { @@ -90,6 +91,7 @@ int main(int argc, char *argv[]) DEFINE(TI_FLAGS, offsetof(struct thread_info, flags)); DEFINE(TI_ADDR_LIMIT, offsetof(struct thread_info, addr_limit)); DEFINE(TI_CPU_CONTEXT, offsetof(struct thread_info, cpu_context)); + DEFINE(TI_PREEMPT_COUNT, offsetof(struct thread_info, preempt_count)); BLANK(); /* struct cpu_context */ diff --git a/arch/microblaze/kernel/cpu/cache.c b/arch/microblaze/kernel/cpu/cache.c index d9d63831cc2..109876e8d64 100644 --- a/arch/microblaze/kernel/cpu/cache.c +++ b/arch/microblaze/kernel/cpu/cache.c @@ -15,25 +15,6 @@ #include <asm/cpuinfo.h> #include <asm/pvr.h> -static inline void __invalidate_flush_icache(unsigned int addr) -{ - __asm__ __volatile__ ("wic %0, r0;" \ - : : "r" (addr)); -} - -static inline void __flush_dcache(unsigned int addr) -{ - __asm__ __volatile__ ("wdc.flush %0, r0;" \ - : : "r" (addr)); -} - -static inline void __invalidate_dcache(unsigned int baseaddr, - unsigned int offset) -{ - __asm__ __volatile__ ("wdc.clear %0, %1;" \ - : : "r" (baseaddr), "r" (offset)); -} - static inline void __enable_icache_msr(void) { __asm__ __volatile__ (" msrset r0, %0; \ @@ -115,13 +96,16 @@ static inline void __disable_dcache_nomsr(void) } -/* Helper macro for computing the limits of cache range loops */ +/* Helper macro for computing the limits of cache range loops + * + * End address can be unaligned which is OK for C implementation. + * ASM implementation align it in ASM macros + */ #define CACHE_LOOP_LIMITS(start, end, cache_line_length, cache_size) \ do { \ int align = ~(cache_line_length - 1); \ end = min(start + cache_size, end); \ start &= align; \ - end = ((end & align) + cache_line_length); \ } while (0); /* @@ -130,9 +114,9 @@ do { \ */ #define CACHE_ALL_LOOP(cache_size, line_length, op) \ do { \ - unsigned int len = cache_size; \ + unsigned int len = cache_size - line_length; \ int step = -line_length; \ - BUG_ON(step >= 0); \ + WARN_ON(step >= 0); \ \ __asm__ __volatile__ (" 1: " #op " %0, r0; \ bgtid %0, 1b; \ @@ -141,30 +125,26 @@ do { \ : "memory"); \ } while (0); - -#define CACHE_ALL_LOOP2(cache_size, line_length, op) \ -do { \ - unsigned int len = cache_size; \ - int step = -line_length; \ - BUG_ON(step >= 0); \ - \ - __asm__ __volatile__ (" 1: " #op " r0, %0; \ - bgtid %0, 1b; \ - addk %0, %0, %1; \ - " : : "r" (len), "r" (step) \ - : "memory"); \ -} while (0); - -/* for wdc.flush/clear */ +/* Used for wdc.flush/clear which can use rB for offset which is not possible + * to use for simple wdc or wic. + * + * start address is cache aligned + * end address is not aligned, if end is aligned then I have to substract + * cacheline length because I can't flush/invalidate the next cacheline. + * If is not, I align it because I will flush/invalidate whole line. + */ #define CACHE_RANGE_LOOP_2(start, end, line_length, op) \ do { \ int step = -line_length; \ - int count = end - start; \ - BUG_ON(count <= 0); \ + int align = ~(line_length - 1); \ + int count; \ + end = ((end & align) == end) ? end - line_length : end & align; \ + count = end - start; \ + WARN_ON(count < 0); \ \ - __asm__ __volatile__ (" 1: " #op " %0, %1; \ - bgtid %1, 1b; \ - addk %1, %1, %2; \ + __asm__ __volatile__ (" 1: " #op " %0, %1; \ + bgtid %1, 1b; \ + addk %1, %1, %2; \ " : : "r" (start), "r" (count), \ "r" (step) : "memory"); \ } while (0); @@ -172,22 +152,27 @@ do { \ /* It is used only first parameter for OP - for wic, wdc */ #define CACHE_RANGE_LOOP_1(start, end, line_length, op) \ do { \ - int step = -line_length; \ - int count = end - start; \ - BUG_ON(count <= 0); \ + int volatile temp; \ + int align = ~(line_length - 1); \ + end = ((end & align) == end) ? end - line_length : end & align; \ + WARN_ON(end - start < 0); \ \ - __asm__ __volatile__ (" 1: addk %0, %0, %1; \ - " #op " %0, r0; \ - bgtid %1, 1b; \ - addk %1, %1, %2; \ - " : : "r" (start), "r" (count), \ - "r" (step) : "memory"); \ + __asm__ __volatile__ (" 1: " #op " %1, r0; \ + cmpu %0, %1, %2; \ + bgtid %0, 1b; \ + addk %1, %1, %3; \ + " : : "r" (temp), "r" (start), "r" (end),\ + "r" (line_length) : "memory"); \ } while (0); +#define ASM_LOOP + static void __flush_icache_range_msr_irq(unsigned long start, unsigned long end) { unsigned long flags; - +#ifndef ASM_LOOP + int i; +#endif pr_debug("%s: start 0x%x, end 0x%x\n", __func__, (unsigned int)start, (unsigned int) end); @@ -197,8 +182,13 @@ static void __flush_icache_range_msr_irq(unsigned long start, unsigned long end) local_irq_save(flags); __disable_icache_msr(); +#ifdef ASM_LOOP CACHE_RANGE_LOOP_1(start, end, cpuinfo.icache_line_length, wic); - +#else + for (i = start; i < end; i += cpuinfo.icache_line_length) + __asm__ __volatile__ ("wic %0, r0;" \ + : : "r" (i)); +#endif __enable_icache_msr(); local_irq_restore(flags); } @@ -207,7 +197,9 @@ static void __flush_icache_range_nomsr_irq(unsigned long start, unsigned long end) { unsigned long flags; - +#ifndef ASM_LOOP + int i; +#endif pr_debug("%s: start 0x%x, end 0x%x\n", __func__, (unsigned int)start, (unsigned int) end); @@ -217,7 +209,13 @@ static void __flush_icache_range_nomsr_irq(unsigned long start, local_irq_save(flags); __disable_icache_nomsr(); +#ifdef ASM_LOOP CACHE_RANGE_LOOP_1(start, end, cpuinfo.icache_line_length, wic); +#else + for (i = start; i < end; i += cpuinfo.icache_line_length) + __asm__ __volatile__ ("wic %0, r0;" \ + : : "r" (i)); +#endif __enable_icache_nomsr(); local_irq_restore(flags); @@ -226,25 +224,41 @@ static void __flush_icache_range_nomsr_irq(unsigned long start, static void __flush_icache_range_noirq(unsigned long start, unsigned long end) { +#ifndef ASM_LOOP + int i; +#endif pr_debug("%s: start 0x%x, end 0x%x\n", __func__, (unsigned int)start, (unsigned int) end); CACHE_LOOP_LIMITS(start, end, cpuinfo.icache_line_length, cpuinfo.icache_size); +#ifdef ASM_LOOP CACHE_RANGE_LOOP_1(start, end, cpuinfo.icache_line_length, wic); +#else + for (i = start; i < end; i += cpuinfo.icache_line_length) + __asm__ __volatile__ ("wic %0, r0;" \ + : : "r" (i)); +#endif } static void __flush_icache_all_msr_irq(void) { unsigned long flags; - +#ifndef ASM_LOOP + int i; +#endif pr_debug("%s\n", __func__); local_irq_save(flags); __disable_icache_msr(); - +#ifdef ASM_LOOP CACHE_ALL_LOOP(cpuinfo.icache_size, cpuinfo.icache_line_length, wic); - +#else + for (i = 0; i < cpuinfo.icache_size; + i += cpuinfo.icache_line_length) + __asm__ __volatile__ ("wic %0, r0;" \ + : : "r" (i)); +#endif __enable_icache_msr(); local_irq_restore(flags); } @@ -252,35 +266,59 @@ static void __flush_icache_all_msr_irq(void) static void __flush_icache_all_nomsr_irq(void) { unsigned long flags; - +#ifndef ASM_LOOP + int i; +#endif pr_debug("%s\n", __func__); local_irq_save(flags); __disable_icache_nomsr(); - +#ifdef ASM_LOOP CACHE_ALL_LOOP(cpuinfo.icache_size, cpuinfo.icache_line_length, wic); - +#else + for (i = 0; i < cpuinfo.icache_size; + i += cpuinfo.icache_line_length) + __asm__ __volatile__ ("wic %0, r0;" \ + : : "r" (i)); +#endif __enable_icache_nomsr(); local_irq_restore(flags); } static void __flush_icache_all_noirq(void) { +#ifndef ASM_LOOP + int i; +#endif pr_debug("%s\n", __func__); +#ifdef ASM_LOOP CACHE_ALL_LOOP(cpuinfo.icache_size, cpuinfo.icache_line_length, wic); +#else + for (i = 0; i < cpuinfo.icache_size; + i += cpuinfo.icache_line_length) + __asm__ __volatile__ ("wic %0, r0;" \ + : : "r" (i)); +#endif } static void __invalidate_dcache_all_msr_irq(void) { unsigned long flags; - +#ifndef ASM_LOOP + int i; +#endif pr_debug("%s\n", __func__); local_irq_save(flags); __disable_dcache_msr(); - +#ifdef ASM_LOOP CACHE_ALL_LOOP(cpuinfo.dcache_size, cpuinfo.dcache_line_length, wdc); - +#else + for (i = 0; i < cpuinfo.dcache_size; + i += cpuinfo.dcache_line_length) + __asm__ __volatile__ ("wdc %0, r0;" \ + : : "r" (i)); +#endif __enable_dcache_msr(); local_irq_restore(flags); } @@ -288,70 +326,111 @@ static void __invalidate_dcache_all_msr_irq(void) static void __invalidate_dcache_all_nomsr_irq(void) { unsigned long flags; - +#ifndef ASM_LOOP + int i; +#endif pr_debug("%s\n", __func__); local_irq_save(flags); __disable_dcache_nomsr(); - +#ifdef ASM_LOOP CACHE_ALL_LOOP(cpuinfo.dcache_size, cpuinfo.dcache_line_length, wdc); - +#else + for (i = 0; i < cpuinfo.dcache_size; + i += cpuinfo.dcache_line_length) + __asm__ __volatile__ ("wdc %0, r0;" \ + : : "r" (i)); +#endif __enable_dcache_nomsr(); local_irq_restore(flags); } static void __invalidate_dcache_all_noirq_wt(void) { +#ifndef ASM_LOOP + int i; +#endif pr_debug("%s\n", __func__); +#ifdef ASM_LOOP CACHE_ALL_LOOP(cpuinfo.dcache_size, cpuinfo.dcache_line_length, wdc) +#else + for (i = 0; i < cpuinfo.dcache_size; + i += cpuinfo.dcache_line_length) + __asm__ __volatile__ ("wdc %0, r0;" \ + : : "r" (i)); +#endif } -/* FIXME this is weird - should be only wdc but not work - * MS: I am getting bus errors and other weird things */ +/* FIXME It is blindly invalidation as is expected + * but can't be called on noMMU in microblaze_cache_init below + * + * MS: noMMU kernel won't boot if simple wdc is used + * The reason should be that there are discared data which kernel needs + */ static void __invalidate_dcache_all_wb(void) { +#ifndef ASM_LOOP + int i; +#endif pr_debug("%s\n", __func__); - CACHE_ALL_LOOP2(cpuinfo.dcache_size, cpuinfo.dcache_line_length, - wdc.clear) - -#if 0 - unsigned int i; - - pr_debug("%s\n", __func__); - - /* Just loop through cache size and invalidate it */ - for (i = 0; i < cpuinfo.dcache_size; i += cpuinfo.dcache_line_length) - __invalidate_dcache(0, i); +#ifdef ASM_LOOP + CACHE_ALL_LOOP(cpuinfo.dcache_size, cpuinfo.dcache_line_length, + wdc) +#else + for (i = 0; i < cpuinfo.dcache_size; + i += cpuinfo.dcache_line_length) + __asm__ __volatile__ ("wdc %0, r0;" \ + : : "r" (i)); #endif } static void __invalidate_dcache_range_wb(unsigned long start, unsigned long end) { +#ifndef ASM_LOOP + int i; +#endif pr_debug("%s: start 0x%x, end 0x%x\n", __func__, (unsigned int)start, (unsigned int) end); CACHE_LOOP_LIMITS(start, end, cpuinfo.dcache_line_length, cpuinfo.dcache_size); +#ifdef ASM_LOOP CACHE_RANGE_LOOP_2(start, end, cpuinfo.dcache_line_length, wdc.clear); +#else + for (i = start; i < end; i += cpuinfo.dcache_line_length) + __asm__ __volatile__ ("wdc.clear %0, r0;" \ + : : "r" (i)); +#endif } static void __invalidate_dcache_range_nomsr_wt(unsigned long start, unsigned long end) { +#ifndef ASM_LOOP + int i; +#endif pr_debug("%s: start 0x%x, end 0x%x\n", __func__, (unsigned int)start, (unsigned int) end); CACHE_LOOP_LIMITS(start, end, cpuinfo.dcache_line_length, cpuinfo.dcache_size); +#ifdef ASM_LOOP CACHE_RANGE_LOOP_1(start, end, cpuinfo.dcache_line_length, wdc); +#else + for (i = start; i < end; i += cpuinfo.dcache_line_length) + __asm__ __volatile__ ("wdc %0, r0;" \ + : : "r" (i)); +#endif } static void __invalidate_dcache_range_msr_irq_wt(unsigned long start, unsigned long end) { unsigned long flags; - +#ifndef ASM_LOOP + int i; +#endif pr_debug("%s: start 0x%x, end 0x%x\n", __func__, (unsigned int)start, (unsigned int) end); CACHE_LOOP_LIMITS(start, end, @@ -360,7 +439,13 @@ static void __invalidate_dcache_range_msr_irq_wt(unsigned long start, local_irq_save(flags); __disable_dcache_msr(); +#ifdef ASM_LOOP CACHE_RANGE_LOOP_1(start, end, cpuinfo.dcache_line_length, wdc); +#else + for (i = start; i < end; i += cpuinfo.dcache_line_length) + __asm__ __volatile__ ("wdc %0, r0;" \ + : : "r" (i)); +#endif __enable_dcache_msr(); local_irq_restore(flags); @@ -370,7 +455,9 @@ static void __invalidate_dcache_range_nomsr_irq(unsigned long start, unsigned long end) { unsigned long flags; - +#ifndef ASM_LOOP + int i; +#endif pr_debug("%s: start 0x%x, end 0x%x\n", __func__, (unsigned int)start, (unsigned int) end); @@ -380,7 +467,13 @@ static void __invalidate_dcache_range_nomsr_irq(unsigned long start, local_irq_save(flags); __disable_dcache_nomsr(); +#ifdef ASM_LOOP CACHE_RANGE_LOOP_1(start, end, cpuinfo.dcache_line_length, wdc); +#else + for (i = start; i < end; i += cpuinfo.dcache_line_length) + __asm__ __volatile__ ("wdc %0, r0;" \ + : : "r" (i)); +#endif __enable_dcache_nomsr(); local_irq_restore(flags); @@ -388,19 +481,38 @@ static void __invalidate_dcache_range_nomsr_irq(unsigned long start, static void __flush_dcache_all_wb(void) { +#ifndef ASM_LOOP + int i; +#endif pr_debug("%s\n", __func__); +#ifdef ASM_LOOP CACHE_ALL_LOOP(cpuinfo.dcache_size, cpuinfo.dcache_line_length, wdc.flush); +#else + for (i = 0; i < cpuinfo.dcache_size; + i += cpuinfo.dcache_line_length) + __asm__ __volatile__ ("wdc.flush %0, r0;" \ + : : "r" (i)); +#endif } static void __flush_dcache_range_wb(unsigned long start, unsigned long end) { +#ifndef ASM_LOOP + int i; +#endif pr_debug("%s: start 0x%x, end 0x%x\n", __func__, (unsigned int)start, (unsigned int) end); CACHE_LOOP_LIMITS(start, end, cpuinfo.dcache_line_length, cpuinfo.dcache_size); +#ifdef ASM_LOOP CACHE_RANGE_LOOP_2(start, end, cpuinfo.dcache_line_length, wdc.flush); +#else + for (i = start; i < end; i += cpuinfo.dcache_line_length) + __asm__ __volatile__ ("wdc.flush %0, r0;" \ + : : "r" (i)); +#endif } /* struct for wb caches and for wt caches */ @@ -504,7 +616,7 @@ const struct scache wt_nomsr_noirq = { #define CPUVER_7_20_A 0x0c #define CPUVER_7_20_D 0x0f -#define INFO(s) printk(KERN_INFO "cache: " s " \n"); +#define INFO(s) printk(KERN_INFO "cache: " s "\n"); void microblaze_cache_init(void) { @@ -543,4 +655,13 @@ void microblaze_cache_init(void) } } } +/* FIXME Invalidation is done in U-BOOT + * WT cache: Data is already written to main memory + * WB cache: Discard data on noMMU which caused that kernel doesn't boot + */ + /* invalidate_dcache(); */ + enable_dcache(); + + invalidate_icache(); + enable_icache(); } diff --git a/arch/microblaze/kernel/cpu/cpuinfo.c b/arch/microblaze/kernel/cpu/cpuinfo.c index 991d71311b0..255ef880351 100644 --- a/arch/microblaze/kernel/cpu/cpuinfo.c +++ b/arch/microblaze/kernel/cpu/cpuinfo.c @@ -9,7 +9,6 @@ */ #include <linux/init.h> -#include <linux/slab.h> #include <asm/cpuinfo.h> #include <asm/pvr.h> diff --git a/arch/microblaze/kernel/cpu/mb.c b/arch/microblaze/kernel/cpu/mb.c index 0c912b2a8e0..4216eb1eaa3 100644 --- a/arch/microblaze/kernel/cpu/mb.c +++ b/arch/microblaze/kernel/cpu/mb.c @@ -98,15 +98,17 @@ static int show_cpuinfo(struct seq_file *m, void *v) if (cpuinfo.use_icache) count += seq_printf(m, - "Icache:\t\t%ukB\n", - cpuinfo.icache_size >> 10); + "Icache:\t\t%ukB\tline length:\t%dB\n", + cpuinfo.icache_size >> 10, + cpuinfo.icache_line_length); else count += seq_printf(m, "Icache:\t\tno\n"); if (cpuinfo.use_dcache) { count += seq_printf(m, - "Dcache:\t\t%ukB\n", - cpuinfo.dcache_size >> 10); + "Dcache:\t\t%ukB\tline length:\t%dB\n", + cpuinfo.dcache_size >> 10, + cpuinfo.dcache_line_length); if (cpuinfo.dcache_wb) count += seq_printf(m, "\t\twrite-back\n"); else diff --git a/arch/microblaze/kernel/dma.c b/arch/microblaze/kernel/dma.c new file mode 100644 index 00000000000..9dcd90b5df5 --- /dev/null +++ b/arch/microblaze/kernel/dma.c @@ -0,0 +1,157 @@ +/* + * Copyright (C) 2009-2010 PetaLogix + * Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corporation + * + * Provide default implementations of the DMA mapping callbacks for + * directly mapped busses. + */ + +#include <linux/device.h> +#include <linux/dma-mapping.h> +#include <linux/gfp.h> +#include <linux/dma-debug.h> +#include <asm/bug.h> +#include <asm/cacheflush.h> + +/* + * Generic direct DMA implementation + * + * This implementation supports a per-device offset that can be applied if + * the address at which memory is visible to devices is not 0. Platform code + * can set archdata.dma_data to an unsigned long holding the offset. By + * default the offset is PCI_DRAM_OFFSET. + */ +static inline void __dma_sync_page(unsigned long paddr, unsigned long offset, + size_t size, enum dma_data_direction direction) +{ + switch (direction) { + case DMA_TO_DEVICE: + flush_dcache_range(paddr + offset, paddr + offset + size); + break; + case DMA_FROM_DEVICE: + invalidate_dcache_range(paddr + offset, paddr + offset + size); + break; + default: + BUG(); + } +} + +static unsigned long get_dma_direct_offset(struct device *dev) +{ + if (likely(dev)) + return (unsigned long)dev->archdata.dma_data; + + return PCI_DRAM_OFFSET; /* FIXME Not sure if is correct */ +} + +#define NOT_COHERENT_CACHE + +static void *dma_direct_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t flag) +{ +#ifdef NOT_COHERENT_CACHE + return consistent_alloc(flag, size, dma_handle); +#else + void *ret; + struct page *page; + int node = dev_to_node(dev); + + /* ignore region specifiers */ + flag &= ~(__GFP_HIGHMEM); + + page = alloc_pages_node(node, flag, get_order(size)); + if (page == NULL) + return NULL; + ret = page_address(page); + memset(ret, 0, size); + *dma_handle = virt_to_phys(ret) + get_dma_direct_offset(dev); + + return ret; +#endif +} + +static void dma_direct_free_coherent(struct device *dev, size_t size, + void *vaddr, dma_addr_t dma_handle) +{ +#ifdef NOT_COHERENT_CACHE + consistent_free(size, vaddr); +#else + free_pages((unsigned long)vaddr, get_order(size)); +#endif +} + +static int dma_direct_map_sg(struct device *dev, struct scatterlist *sgl, + int nents, enum dma_data_direction direction, + struct dma_attrs *attrs) +{ + struct scatterlist *sg; + int i; + + /* FIXME this part of code is untested */ + for_each_sg(sgl, sg, nents, i) { + sg->dma_address = sg_phys(sg) + get_dma_direct_offset(dev); + sg->dma_length = sg->length; + __dma_sync_page(page_to_phys(sg_page(sg)), sg->offset, + sg->length, direction); + } + + return nents; +} + +static void dma_direct_unmap_sg(struct device *dev, struct scatterlist *sg, + int nents, enum dma_data_direction direction, + struct dma_attrs *attrs) +{ +} + +static int dma_direct_dma_supported(struct device *dev, u64 mask) +{ + return 1; +} + +static inline dma_addr_t dma_direct_map_page(struct device *dev, + struct page *page, + unsigned long offset, + size_t size, + enum dma_data_direction direction, + struct dma_attrs *attrs) +{ + __dma_sync_page(page_to_phys(page), offset, size, direction); + return page_to_phys(page) + offset + get_dma_direct_offset(dev); +} + +static inline void dma_direct_unmap_page(struct device *dev, + dma_addr_t dma_address, + size_t size, + enum dma_data_direction direction, + struct dma_attrs *attrs) +{ +/* There is not necessary to do cache cleanup + * + * phys_to_virt is here because in __dma_sync_page is __virt_to_phys and + * dma_address is physical address + */ + __dma_sync_page(dma_address, 0 , size, direction); +} + +struct dma_map_ops dma_direct_ops = { + .alloc_coherent = dma_direct_alloc_coherent, + .free_coherent = dma_direct_free_coherent, + .map_sg = dma_direct_map_sg, + .unmap_sg = dma_direct_unmap_sg, + .dma_supported = dma_direct_dma_supported, + .map_page = dma_direct_map_page, + .unmap_page = dma_direct_unmap_page, +}; +EXPORT_SYMBOL(dma_direct_ops); + +/* Number of entries preallocated for DMA-API debugging */ +#define PREALLOC_DMA_DEBUG_ENTRIES (1 << 16) + +static int __init dma_init(void) +{ + dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES); + + return 0; +} +fs_initcall(dma_init); diff --git a/arch/microblaze/kernel/entry-nommu.S b/arch/microblaze/kernel/entry-nommu.S index 95b0855802d..8cc18cd2cce 100644 --- a/arch/microblaze/kernel/entry-nommu.S +++ b/arch/microblaze/kernel/entry-nommu.S @@ -122,7 +122,7 @@ ENTRY(_interrupt) ret_from_intr: lwi r11, r1, PT_MODE - bneid r11, 3f + bneid r11, no_intr_resched lwi r6, r31, TS_THREAD_INFO /* get thread info */ lwi r19, r6, TI_FLAGS /* get flags in thread info */ @@ -133,16 +133,18 @@ ret_from_intr: bralid r15, schedule nop 1: andi r11, r19, _TIF_SIGPENDING - beqid r11, no_intr_reshed + beqid r11, no_intr_resched addk r5, r1, r0 addk r7, r0, r0 bralid r15, do_signal addk r6, r0, r0 -no_intr_reshed: +no_intr_resched: + /* Disable interrupts, we are now committed to the state restore */ + disable_irq + /* save mode indicator */ lwi r11, r1, PT_MODE -3: swi r11, r0, PER_CPU(KM) /* save r31 */ @@ -474,6 +476,8 @@ ENTRY(ret_from_fork) nop work_pending: + enable_irq + andi r11, r19, _TIF_NEED_RESCHED beqi r11, 1f bralid r15, schedule diff --git a/arch/microblaze/kernel/entry.S b/arch/microblaze/kernel/entry.S index 3bad4ff4947..c0ede25c5b9 100644 --- a/arch/microblaze/kernel/entry.S +++ b/arch/microblaze/kernel/entry.S @@ -305,7 +305,7 @@ C_ENTRY(_user_exception): swi r11, r1, PTO+PT_R1; /* Store user SP. */ addi r11, r0, 1; swi r11, r0, TOPHYS(PER_CPU(KM)); /* Now we're in kernel-mode. */ -2: lwi r31, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); /* get saved current */ +2: lwi CURRENT_TASK, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); /* Save away the syscall number. */ swi r12, r1, PTO+PT_R0; tovirt(r1,r1) @@ -322,8 +322,7 @@ C_ENTRY(_user_exception): rtid r11, 0 nop 3: - add r11, r0, CURRENT_TASK /* Get current task ptr into r11 */ - lwi r11, r11, TS_THREAD_INFO /* get thread info */ + lwi r11, CURRENT_TASK, TS_THREAD_INFO /* get thread info */ lwi r11, r11, TI_FLAGS /* get flags in thread info */ andi r11, r11, _TIF_WORK_SYSCALL_MASK beqi r11, 4f @@ -382,60 +381,50 @@ C_ENTRY(ret_from_trap): /* See if returning to kernel mode, if so, skip resched &c. */ bnei r11, 2f; + swi r3, r1, PTO + PT_R3 + swi r4, r1, PTO + PT_R4 + /* We're returning to user mode, so check for various conditions that * trigger rescheduling. */ - # FIXME: Restructure all these flag checks. - add r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */ - lwi r11, r11, TS_THREAD_INFO; /* get thread info */ + /* FIXME: Restructure all these flag checks. */ + lwi r11, CURRENT_TASK, TS_THREAD_INFO; /* get thread info */ lwi r11, r11, TI_FLAGS; /* get flags in thread info */ andi r11, r11, _TIF_WORK_SYSCALL_MASK beqi r11, 1f - swi r3, r1, PTO + PT_R3 - swi r4, r1, PTO + PT_R4 brlid r15, do_syscall_trace_leave addik r5, r1, PTO + PT_R0 - lwi r3, r1, PTO + PT_R3 - lwi r4, r1, PTO + PT_R4 1: - /* We're returning to user mode, so check for various conditions that * trigger rescheduling. */ - /* Get current task ptr into r11 */ - add r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */ - lwi r11, r11, TS_THREAD_INFO; /* get thread info */ + /* get thread info from current task */ + lwi r11, CURRENT_TASK, TS_THREAD_INFO; lwi r11, r11, TI_FLAGS; /* get flags in thread info */ andi r11, r11, _TIF_NEED_RESCHED; beqi r11, 5f; - swi r3, r1, PTO + PT_R3; /* store syscall result */ - swi r4, r1, PTO + PT_R4; bralid r15, schedule; /* Call scheduler */ nop; /* delay slot */ - lwi r3, r1, PTO + PT_R3; /* restore syscall result */ - lwi r4, r1, PTO + PT_R4; /* Maybe handle a signal */ -5: add r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */ - lwi r11, r11, TS_THREAD_INFO; /* get thread info */ +5: /* get thread info from current task*/ + lwi r11, CURRENT_TASK, TS_THREAD_INFO; lwi r11, r11, TI_FLAGS; /* get flags in thread info */ andi r11, r11, _TIF_SIGPENDING; beqi r11, 1f; /* Signals to handle, handle them */ - swi r3, r1, PTO + PT_R3; /* store syscall result */ - swi r4, r1, PTO + PT_R4; la r5, r1, PTO; /* Arg 1: struct pt_regs *regs */ - add r6, r0, r0; /* Arg 2: sigset_t *oldset */ addi r7, r0, 1; /* Arg 3: int in_syscall */ bralid r15, do_signal; /* Handle any signals */ - nop; + add r6, r0, r0; /* Arg 2: sigset_t *oldset */ + +/* Finally, return to user state. */ +1: lwi r3, r1, PTO + PT_R3; /* restore syscall result */ lwi r4, r1, PTO + PT_R4; -/* Finally, return to user state. */ -1: swi r0, r0, PER_CPU(KM); /* Now officially in user state. */ - add r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */ - swi r11, r0, PER_CPU(CURRENT_SAVE); /* save current */ + swi r0, r0, PER_CPU(KM); /* Now officially in user state. */ + swi CURRENT_TASK, r0, PER_CPU(CURRENT_SAVE); /* save current */ VM_OFF; tophys(r1,r1); RESTORE_REGS; @@ -565,7 +554,7 @@ C_ENTRY(sys_rt_sigreturn_wrapper): swi r11, r1, PTO+PT_R1; /* Store user SP. */ \ addi r11, r0, 1; \ swi r11, r0, TOPHYS(PER_CPU(KM)); /* Now we're in kernel-mode.*/\ -2: lwi r31, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); /* get saved current */\ +2: lwi CURRENT_TASK, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); \ /* Save away the syscall number. */ \ swi r0, r1, PTO+PT_R0; \ tovirt(r1,r1) @@ -673,9 +662,7 @@ C_ENTRY(ret_from_exc): /* We're returning to user mode, so check for various conditions that trigger rescheduling. */ - /* Get current task ptr into r11 */ - add r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */ - lwi r11, r11, TS_THREAD_INFO; /* get thread info */ + lwi r11, CURRENT_TASK, TS_THREAD_INFO; /* get thread info */ lwi r11, r11, TI_FLAGS; /* get flags in thread info */ andi r11, r11, _TIF_NEED_RESCHED; beqi r11, 5f; @@ -685,8 +672,7 @@ C_ENTRY(ret_from_exc): nop; /* delay slot */ /* Maybe handle a signal */ -5: add r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */ - lwi r11, r11, TS_THREAD_INFO; /* get thread info */ +5: lwi r11, CURRENT_TASK, TS_THREAD_INFO; /* get thread info */ lwi r11, r11, TI_FLAGS; /* get flags in thread info */ andi r11, r11, _TIF_SIGPENDING; beqi r11, 1f; /* Signals to handle, handle them */ @@ -705,15 +691,13 @@ C_ENTRY(ret_from_exc): * store return registers separately because this macros is use * for others exceptions */ la r5, r1, PTO; /* Arg 1: struct pt_regs *regs */ - add r6, r0, r0; /* Arg 2: sigset_t *oldset */ addi r7, r0, 0; /* Arg 3: int in_syscall */ bralid r15, do_signal; /* Handle any signals */ - nop; + add r6, r0, r0; /* Arg 2: sigset_t *oldset */ /* Finally, return to user state. */ 1: swi r0, r0, PER_CPU(KM); /* Now officially in user state. */ - add r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */ - swi r11, r0, PER_CPU(CURRENT_SAVE); /* save current */ + swi CURRENT_TASK, r0, PER_CPU(CURRENT_SAVE); /* save current */ VM_OFF; tophys(r1,r1); @@ -802,7 +786,7 @@ C_ENTRY(_interrupt): swi r11, r0, TOPHYS(PER_CPU(KM)); 2: - lwi r31, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); + lwi CURRENT_TASK, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); swi r0, r1, PTO + PT_R0; tovirt(r1,r1) la r5, r1, PTO; @@ -817,8 +801,7 @@ ret_from_irq: lwi r11, r1, PTO + PT_MODE; bnei r11, 2f; - add r11, r0, CURRENT_TASK; - lwi r11, r11, TS_THREAD_INFO; + lwi r11, CURRENT_TASK, TS_THREAD_INFO; lwi r11, r11, TI_FLAGS; /* MS: get flags from thread info */ andi r11, r11, _TIF_NEED_RESCHED; beqi r11, 5f @@ -826,8 +809,7 @@ ret_from_irq: nop; /* delay slot */ /* Maybe handle a signal */ -5: add r11, r0, CURRENT_TASK; - lwi r11, r11, TS_THREAD_INFO; /* MS: get thread info */ +5: lwi r11, CURRENT_TASK, TS_THREAD_INFO; /* MS: get thread info */ lwi r11, r11, TI_FLAGS; /* get flags in thread info */ andi r11, r11, _TIF_SIGPENDING; beqid r11, no_intr_resched @@ -842,8 +824,7 @@ no_intr_resched: /* Disable interrupts, we are now committed to the state restore */ disable_irq swi r0, r0, PER_CPU(KM); /* MS: Now officially in user state. */ - add r11, r0, CURRENT_TASK; - swi r11, r0, PER_CPU(CURRENT_SAVE); + swi CURRENT_TASK, r0, PER_CPU(CURRENT_SAVE); VM_OFF; tophys(r1,r1); lwi r3, r1, PTO + PT_R3; /* MS: restore saved r3, r4 registers */ @@ -853,7 +834,28 @@ no_intr_resched: lwi r1, r1, PT_R1 - PT_SIZE; bri 6f; /* MS: Return to kernel state. */ -2: VM_OFF /* MS: turn off MMU */ +2: +#ifdef CONFIG_PREEMPT + lwi r11, CURRENT_TASK, TS_THREAD_INFO; + /* MS: get preempt_count from thread info */ + lwi r5, r11, TI_PREEMPT_COUNT; + bgti r5, restore; + + lwi r5, r11, TI_FLAGS; /* get flags in thread info */ + andi r5, r5, _TIF_NEED_RESCHED; + beqi r5, restore /* if zero jump over */ + +preempt: + /* interrupts are off that's why I am calling preempt_chedule_irq */ + bralid r15, preempt_schedule_irq + nop + lwi r11, CURRENT_TASK, TS_THREAD_INFO; /* get thread info */ + lwi r5, r11, TI_FLAGS; /* get flags in thread info */ + andi r5, r5, _TIF_NEED_RESCHED; + bnei r5, preempt /* if non zero jump to resched */ +restore: +#endif + VM_OFF /* MS: turn off MMU */ tophys(r1,r1) lwi r3, r1, PTO + PT_R3; /* MS: restore saved r3, r4 registers */ lwi r4, r1, PTO + PT_R4; @@ -915,7 +917,7 @@ C_ENTRY(_debug_exception): swi r11, r1, PTO+PT_R1; /* Store user SP. */ addi r11, r0, 1; swi r11, r0, TOPHYS(PER_CPU(KM)); /* Now we're in kernel-mode. */ -2: lwi r31, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); /* get saved current */ +2: lwi CURRENT_TASK, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); /* Save away the syscall number. */ swi r0, r1, PTO+PT_R0; tovirt(r1,r1) @@ -935,8 +937,7 @@ dbtrap_call: rtbd r11, 0; bnei r11, 2f; /* Get current task ptr into r11 */ - add r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */ - lwi r11, r11, TS_THREAD_INFO; /* get thread info */ + lwi r11, CURRENT_TASK, TS_THREAD_INFO; /* get thread info */ lwi r11, r11, TI_FLAGS; /* get flags in thread info */ andi r11, r11, _TIF_NEED_RESCHED; beqi r11, 5f; @@ -949,8 +950,7 @@ dbtrap_call: rtbd r11, 0; /* XXX m68knommu also checks TASK_STATE & TASK_COUNTER here. */ /* Maybe handle a signal */ -5: add r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */ - lwi r11, r11, TS_THREAD_INFO; /* get thread info */ +5: lwi r11, CURRENT_TASK, TS_THREAD_INFO; /* get thread info */ lwi r11, r11, TI_FLAGS; /* get flags in thread info */ andi r11, r11, _TIF_SIGPENDING; beqi r11, 1f; /* Signals to handle, handle them */ @@ -966,16 +966,14 @@ dbtrap_call: rtbd r11, 0; (in a possibly modified form) after do_signal returns. */ la r5, r1, PTO; /* Arg 1: struct pt_regs *regs */ - add r6, r0, r0; /* Arg 2: sigset_t *oldset */ addi r7, r0, 0; /* Arg 3: int in_syscall */ bralid r15, do_signal; /* Handle any signals */ - nop; + add r6, r0, r0; /* Arg 2: sigset_t *oldset */ /* Finally, return to user state. */ 1: swi r0, r0, PER_CPU(KM); /* Now officially in user state. */ - add r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */ - swi r11, r0, PER_CPU(CURRENT_SAVE); /* save current */ + swi CURRENT_TASK, r0, PER_CPU(CURRENT_SAVE); /* save current */ VM_OFF; tophys(r1,r1); @@ -1007,7 +1005,7 @@ DBTRAP_return: /* Make global symbol for debugging */ ENTRY(_switch_to) /* prepare return value */ - addk r3, r0, r31 + addk r3, r0, CURRENT_TASK /* save registers in cpu_context */ /* use r11 and r12, volatile registers, as temp register */ @@ -1051,10 +1049,10 @@ ENTRY(_switch_to) nop swi r12, r11, CC_FSR - /* update r31, the current */ - lwi r31, r6, TI_TASK/* give me pointer to task which will be next */ + /* update r31, the current-give me pointer to task which will be next */ + lwi CURRENT_TASK, r6, TI_TASK /* stored it to current_save too */ - swi r31, r0, PER_CPU(CURRENT_SAVE) + swi CURRENT_TASK, r0, PER_CPU(CURRENT_SAVE) /* get new process' cpu context and restore */ /* give me start where start context of next task */ diff --git a/arch/microblaze/kernel/exceptions.c b/arch/microblaze/kernel/exceptions.c index d9f70f83097..02cbdfe5aa8 100644 --- a/arch/microblaze/kernel/exceptions.c +++ b/arch/microblaze/kernel/exceptions.c @@ -121,7 +121,7 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type, } printk(KERN_WARNING "Divide by zero exception " \ "in kernel mode.\n"); - die("Divide by exception", regs, SIGBUS); + die("Divide by zero exception", regs, SIGBUS); break; case MICROBLAZE_FPU_EXCEPTION: pr_debug(KERN_WARNING "FPU exception\n"); diff --git a/arch/microblaze/kernel/ftrace.c b/arch/microblaze/kernel/ftrace.c index 388b31ca65a..515feb40455 100644 --- a/arch/microblaze/kernel/ftrace.c +++ b/arch/microblaze/kernel/ftrace.c @@ -151,13 +151,10 @@ int ftrace_make_nop(struct module *mod, return ret; } -static int ret_addr; /* initialized as 0 by default */ - /* I believe that first is called ftrace_make_nop before this function */ int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) { int ret; - ret_addr = addr; /* saving where the barrier jump is */ pr_debug("%s: addr:0x%x, rec->ip: 0x%x, imm:0x%x\n", __func__, (unsigned int)addr, (unsigned int)rec->ip, imm); ret = ftrace_modify_code(rec->ip, imm); @@ -194,12 +191,9 @@ int ftrace_update_ftrace_func(ftrace_func_t func) ret = ftrace_modify_code(ip, upper); ret += ftrace_modify_code(ip + 4, lower); - /* We just need to remove the rtsd r15, 8 by NOP */ - BUG_ON(!ret_addr); - if (ret_addr) - ret += ftrace_modify_code(ret_addr, MICROBLAZE_NOP); - else - ret = 1; /* fault */ + /* We just need to replace the rtsd r15, 8 with NOP */ + ret += ftrace_modify_code((unsigned long)&ftrace_caller, + MICROBLAZE_NOP); /* All changes are done - lets do caches consistent */ flush_icache(); diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S index 30916193fcc..1bf73988826 100644 --- a/arch/microblaze/kernel/head.S +++ b/arch/microblaze/kernel/head.S @@ -28,6 +28,7 @@ * for more details. */ +#include <linux/init.h> #include <linux/linkage.h> #include <asm/thread_info.h> #include <asm/page.h> @@ -49,8 +50,14 @@ swapper_pg_dir: #endif /* CONFIG_MMU */ - .text + __HEAD ENTRY(_start) +#if CONFIG_KERNEL_BASE_ADDR == 0 + brai TOPHYS(real_start) + .org 0x100 +real_start: +#endif + mfs r1, rmsr andi r1, r1, ~2 mts rmsr, r1 @@ -99,8 +106,8 @@ no_fdt_arg: tophys(r4,r4) /* convert to phys address */ ori r3, r0, COMMAND_LINE_SIZE - 1 /* number of loops */ _copy_command_line: - lbu r7, r5, r6 /* r7=r5+r6 - r5 contain pointer to command line */ - sb r7, r4, r6 /* addr[r4+r6]= r7*/ + lbu r2, r5, r6 /* r2=r5+r6 - r5 contain pointer to command line */ + sb r2, r4, r6 /* addr[r4+r6]= r2*/ addik r6, r6, 1 /* increment counting */ bgtid r3, _copy_command_line /* loop for all entries */ addik r3, r3, -1 /* descrement loop */ @@ -128,7 +135,7 @@ _copy_bram: * virtual to physical. */ nop - addik r3, r0, 63 /* Invalidate all TLB entries */ + addik r3, r0, MICROBLAZE_TLB_SIZE -1 /* Invalidate all TLB entries */ _invalidate: mts rtlbx, r3 mts rtlbhi, r0 /* flush: ensure V is clear */ @@ -136,6 +143,11 @@ _invalidate: addik r3, r3, -1 /* sync */ + /* Setup the kernel PID */ + mts rpid,r0 /* Load the kernel PID */ + nop + bri 4 + /* * We should still be executing code at physical address area * RAM_BASEADDR at this point. However, kernel code is at @@ -146,10 +158,6 @@ _invalidate: addik r3,r0, CONFIG_KERNEL_START /* Load the kernel virtual address */ tophys(r4,r3) /* Load the kernel physical address */ - mts rpid,r0 /* Load the kernel PID */ - nop - bri 4 - /* * Configure and load two entries into TLB slots 0 and 1. * In case we are pinning TLBs, these are reserved in by the diff --git a/arch/microblaze/kernel/hw_exception_handler.S b/arch/microblaze/kernel/hw_exception_handler.S index 2b86c03aa84..995a2123635 100644 --- a/arch/microblaze/kernel/hw_exception_handler.S +++ b/arch/microblaze/kernel/hw_exception_handler.S @@ -313,13 +313,13 @@ _hw_exception_handler: mfs r5, rmsr; nop swi r5, r1, 0; - mfs r3, resr + mfs r4, resr nop - mfs r4, rear; + mfs r3, rear; nop #ifndef CONFIG_MMU - andi r5, r3, 0x1000; /* Check ESR[DS] */ + andi r5, r4, 0x1000; /* Check ESR[DS] */ beqi r5, not_in_delay_slot; /* Branch if ESR[DS] not set */ mfs r17, rbtr; /* ESR[DS] set - return address in BTR */ nop @@ -327,13 +327,14 @@ not_in_delay_slot: swi r17, r1, PT_R17 #endif - andi r5, r3, 0x1F; /* Extract ESR[EXC] */ + andi r5, r4, 0x1F; /* Extract ESR[EXC] */ #ifdef CONFIG_MMU /* Calculate exception vector offset = r5 << 2 */ addk r6, r5, r5; /* << 1 */ addk r6, r6, r6; /* << 2 */ +#ifdef DEBUG /* counting which exception happen */ lwi r5, r0, 0x200 + TOPHYS(r0_ram) addi r5, r5, 1 @@ -341,6 +342,7 @@ not_in_delay_slot: lwi r5, r6, 0x200 + TOPHYS(r0_ram) addi r5, r5, 1 swi r5, r6, 0x200 + TOPHYS(r0_ram) +#endif /* end */ /* Load the HW Exception vector */ lwi r6, r6, TOPHYS(_MB_HW_ExceptionVectorTable) @@ -376,7 +378,7 @@ handle_other_ex: /* Handle Other exceptions here */ swi r18, r1, PT_R18 or r5, r1, r0 - andi r6, r3, 0x1F; /* Load ESR[EC] */ + andi r6, r4, 0x1F; /* Load ESR[EC] */ lwi r7, r0, PER_CPU(KM) /* MS: saving current kernel mode to regs */ swi r7, r1, PT_MODE mfs r7, rfsr @@ -426,11 +428,11 @@ handle_other_ex: /* Handle Other exceptions here */ */ handle_unaligned_ex: /* Working registers already saved: R3, R4, R5, R6 - * R3 = ESR - * R4 = EAR + * R4 = ESR + * R3 = EAR */ #ifdef CONFIG_MMU - andi r6, r3, 0x1000 /* Check ESR[DS] */ + andi r6, r4, 0x1000 /* Check ESR[DS] */ beqi r6, _no_delayslot /* Branch if ESR[DS] not set */ mfs r17, rbtr; /* ESR[DS] set - return address in BTR */ nop @@ -439,7 +441,7 @@ _no_delayslot: RESTORE_STATE; bri unaligned_data_trap #endif - andi r6, r3, 0x3E0; /* Mask and extract the register operand */ + andi r6, r4, 0x3E0; /* Mask and extract the register operand */ srl r6, r6; /* r6 >> 5 */ srl r6, r6; srl r6, r6; @@ -448,33 +450,33 @@ _no_delayslot: /* Store the register operand in a temporary location */ sbi r6, r0, TOPHYS(ex_reg_op); - andi r6, r3, 0x400; /* Extract ESR[S] */ + andi r6, r4, 0x400; /* Extract ESR[S] */ bnei r6, ex_sw; ex_lw: - andi r6, r3, 0x800; /* Extract ESR[W] */ + andi r6, r4, 0x800; /* Extract ESR[W] */ beqi r6, ex_lhw; - lbui r5, r4, 0; /* Exception address in r4 */ + lbui r5, r3, 0; /* Exception address in r3 */ /* Load a word, byte-by-byte from destination address and save it in tmp space */ sbi r5, r0, TOPHYS(ex_tmp_data_loc_0); - lbui r5, r4, 1; + lbui r5, r3, 1; sbi r5, r0, TOPHYS(ex_tmp_data_loc_1); - lbui r5, r4, 2; + lbui r5, r3, 2; sbi r5, r0, TOPHYS(ex_tmp_data_loc_2); - lbui r5, r4, 3; + lbui r5, r3, 3; sbi r5, r0, TOPHYS(ex_tmp_data_loc_3); - /* Get the destination register value into r3 */ - lwi r3, r0, TOPHYS(ex_tmp_data_loc_0); + /* Get the destination register value into r4 */ + lwi r4, r0, TOPHYS(ex_tmp_data_loc_0); bri ex_lw_tail; ex_lhw: - lbui r5, r4, 0; /* Exception address in r4 */ + lbui r5, r3, 0; /* Exception address in r3 */ /* Load a half-word, byte-by-byte from destination address and save it in tmp space */ sbi r5, r0, TOPHYS(ex_tmp_data_loc_0); - lbui r5, r4, 1; + lbui r5, r3, 1; sbi r5, r0, TOPHYS(ex_tmp_data_loc_1); - /* Get the destination register value into r3 */ - lhui r3, r0, TOPHYS(ex_tmp_data_loc_0); + /* Get the destination register value into r4 */ + lhui r4, r0, TOPHYS(ex_tmp_data_loc_0); ex_lw_tail: /* Get the destination register number into r5 */ lbui r5, r0, TOPHYS(ex_reg_op); @@ -502,25 +504,25 @@ ex_sw_tail: andi r6, r6, 0x800; /* Extract ESR[W] */ beqi r6, ex_shw; /* Get the word - delay slot */ - swi r3, r0, TOPHYS(ex_tmp_data_loc_0); + swi r4, r0, TOPHYS(ex_tmp_data_loc_0); /* Store the word, byte-by-byte into destination address */ - lbui r3, r0, TOPHYS(ex_tmp_data_loc_0); - sbi r3, r4, 0; - lbui r3, r0, TOPHYS(ex_tmp_data_loc_1); - sbi r3, r4, 1; - lbui r3, r0, TOPHYS(ex_tmp_data_loc_2); - sbi r3, r4, 2; - lbui r3, r0, TOPHYS(ex_tmp_data_loc_3); - sbi r3, r4, 3; + lbui r4, r0, TOPHYS(ex_tmp_data_loc_0); + sbi r4, r3, 0; + lbui r4, r0, TOPHYS(ex_tmp_data_loc_1); + sbi r4, r3, 1; + lbui r4, r0, TOPHYS(ex_tmp_data_loc_2); + sbi r4, r3, 2; + lbui r4, r0, TOPHYS(ex_tmp_data_loc_3); + sbi r4, r3, 3; bri ex_handler_done; ex_shw: /* Store the lower half-word, byte-by-byte into destination address */ - swi r3, r0, TOPHYS(ex_tmp_data_loc_0); - lbui r3, r0, TOPHYS(ex_tmp_data_loc_2); - sbi r3, r4, 0; - lbui r3, r0, TOPHYS(ex_tmp_data_loc_3); - sbi r3, r4, 1; + swi r4, r0, TOPHYS(ex_tmp_data_loc_0); + lbui r4, r0, TOPHYS(ex_tmp_data_loc_2); + sbi r4, r3, 0; + lbui r4, r0, TOPHYS(ex_tmp_data_loc_3); + sbi r4, r3, 1; ex_sw_end: /* Exception handling of store word, ends. */ ex_handler_done: @@ -560,21 +562,16 @@ ex_handler_done: */ mfs r11, rpid nop - bri 4 - mfs r3, rear /* Get faulting address */ - nop /* If we are faulting a kernel address, we have to use the * kernel page tables. */ - ori r4, r0, CONFIG_KERNEL_START - cmpu r4, r3, r4 - bgti r4, ex3 + ori r5, r0, CONFIG_KERNEL_START + cmpu r5, r3, r5 + bgti r5, ex3 /* First, check if it was a zone fault (which means a user * tried to access a kernel or read-protected page - always * a SEGV). All other faults here must be stores, so no * need to check ESR_S as well. */ - mfs r4, resr - nop andi r4, r4, 0x800 /* ESR_Z - zone protection */ bnei r4, ex2 @@ -589,8 +586,6 @@ ex_handler_done: * tried to access a kernel or read-protected page - always * a SEGV). All other faults here must be stores, so no * need to check ESR_S as well. */ - mfs r4, resr - nop andi r4, r4, 0x800 /* ESR_Z */ bnei r4, ex2 /* get current task address */ @@ -665,8 +660,6 @@ ex_handler_done: * R3 = ESR */ - mfs r3, rear /* Get faulting address */ - nop RESTORE_STATE; bri page_fault_instr_trap @@ -677,18 +670,15 @@ ex_handler_done: */ handle_data_tlb_miss_exception: /* Working registers already saved: R3, R4, R5, R6 - * R3 = ESR + * R3 = EAR, R4 = ESR */ mfs r11, rpid nop - bri 4 - mfs r3, rear /* Get faulting address */ - nop /* If we are faulting a kernel address, we have to use the * kernel page tables. */ - ori r4, r0, CONFIG_KERNEL_START - cmpu r4, r3, r4 + ori r6, r0, CONFIG_KERNEL_START + cmpu r4, r3, r6 bgti r4, ex5 ori r4, r0, swapper_pg_dir mts rpid, r0 /* TLB will have 0 TID */ @@ -731,9 +721,8 @@ ex_handler_done: * Many of these bits are software only. Bits we don't set * here we (properly should) assume have the appropriate value. */ + brid finish_tlb_load andni r4, r4, 0x0ce2 /* Make sure 20, 21 are zero */ - - bri finish_tlb_load ex7: /* The bailout. Restore registers to pre-exception conditions * and call the heavyweights to help us out. @@ -754,9 +743,6 @@ ex_handler_done: */ mfs r11, rpid nop - bri 4 - mfs r3, rear /* Get faulting address */ - nop /* If we are faulting a kernel address, we have to use the * kernel page tables. @@ -792,7 +778,7 @@ ex_handler_done: lwi r4, r5, 0 /* Get Linux PTE */ andi r6, r4, _PAGE_PRESENT - beqi r6, ex7 + beqi r6, ex10 ori r4, r4, _PAGE_ACCESSED swi r4, r5, 0 @@ -805,9 +791,8 @@ ex_handler_done: * Many of these bits are software only. Bits we don't set * here we (properly should) assume have the appropriate value. */ + brid finish_tlb_load andni r4, r4, 0x0ce2 /* Make sure 20, 21 are zero */ - - bri finish_tlb_load ex10: /* The bailout. Restore registers to pre-exception conditions * and call the heavyweights to help us out. @@ -837,9 +822,9 @@ ex_handler_done: andi r5, r5, (MICROBLAZE_TLB_SIZE-1) ori r6, r0, 1 cmp r31, r5, r6 - blti r31, sem + blti r31, ex12 addik r5, r6, 1 - sem: + ex12: /* MS: save back current TLB index */ swi r5, r0, TOPHYS(tlb_index) @@ -859,7 +844,6 @@ ex_handler_done: nop /* Done...restore registers and get out of here. */ - ex12: mts rpid, r11 nop bri 4 diff --git a/arch/microblaze/kernel/irq.c b/arch/microblaze/kernel/irq.c index 0f06034d1fe..8f120aca123 100644 --- a/arch/microblaze/kernel/irq.c +++ b/arch/microblaze/kernel/irq.c @@ -9,6 +9,7 @@ */ #include <linux/init.h> +#include <linux/ftrace.h> #include <linux/kernel.h> #include <linux/hardirq.h> #include <linux/interrupt.h> @@ -32,7 +33,7 @@ EXPORT_SYMBOL_GPL(irq_of_parse_and_map); static u32 concurrent_irq; -void do_IRQ(struct pt_regs *regs) +void __irq_entry do_IRQ(struct pt_regs *regs) { unsigned int irq; struct pt_regs *old_regs = set_irq_regs(regs); @@ -93,3 +94,18 @@ skip: } return 0; } + +/* MS: There is no any advance mapping mechanism. We are using simple 32bit + intc without any cascades or any connection that's why mapping is 1:1 */ +unsigned int irq_create_mapping(struct irq_host *host, irq_hw_number_t hwirq) +{ + return hwirq; +} +EXPORT_SYMBOL_GPL(irq_create_mapping); + +unsigned int irq_create_of_mapping(struct device_node *controller, + u32 *intspec, unsigned int intsize) +{ + return intspec[0]; +} +EXPORT_SYMBOL_GPL(irq_create_of_mapping); diff --git a/arch/microblaze/kernel/microblaze_ksyms.c b/arch/microblaze/kernel/microblaze_ksyms.c index bc4dcb7d386..ff85f771803 100644 --- a/arch/microblaze/kernel/microblaze_ksyms.c +++ b/arch/microblaze/kernel/microblaze_ksyms.c @@ -52,3 +52,14 @@ EXPORT_SYMBOL_GPL(_ebss); extern void _mcount(void); EXPORT_SYMBOL(_mcount); #endif + +/* + * Assembly functions that may be used (directly or indirectly) by modules + */ +EXPORT_SYMBOL(__copy_tofrom_user); +EXPORT_SYMBOL(__strncpy_user); + +#ifdef CONFIG_OPT_LIB_ASM +EXPORT_SYMBOL(memcpy); +EXPORT_SYMBOL(memmove); +#endif diff --git a/arch/microblaze/kernel/misc.S b/arch/microblaze/kernel/misc.S index df16c6287a8..0fb5fc6c1fc 100644 --- a/arch/microblaze/kernel/misc.S +++ b/arch/microblaze/kernel/misc.S @@ -26,9 +26,10 @@ * We avoid flushing the pinned 0, 1 and possibly 2 entries. */ .globl _tlbia; +.type _tlbia, @function .align 4; _tlbia: - addik r12, r0, 63 /* flush all entries (63 - 3) */ + addik r12, r0, MICROBLAZE_TLB_SIZE - 1 /* flush all entries (63 - 3) */ /* isync */ _tlbia_1: mts rtlbx, r12 @@ -41,11 +42,13 @@ _tlbia_1: /* sync */ rtsd r15, 8 nop + .size _tlbia, . - _tlbia /* * Flush MMU TLB for a particular address (in r5) */ .globl _tlbie; +.type _tlbie, @function .align 4; _tlbie: mts rtlbsx, r5 /* look up the address in TLB */ @@ -59,17 +62,20 @@ _tlbie_1: rtsd r15, 8 nop + .size _tlbie, . - _tlbie + /* * Allocate TLB entry for early console */ .globl early_console_reg_tlb_alloc; +.type early_console_reg_tlb_alloc, @function .align 4; early_console_reg_tlb_alloc: /* * Load a TLB entry for the UART, so that microblaze_progress() can use * the UARTs nice and early. We use a 4k real==virtual mapping. */ - ori r4, r0, 63 + ori r4, r0, MICROBLAZE_TLB_SIZE - 1 mts rtlbx, r4 /* TLB slot 2 */ or r4,r5,r0 @@ -86,35 +92,4 @@ early_console_reg_tlb_alloc: rtsd r15, 8 nop -/* - * Copy a whole page (4096 bytes). - */ -#define COPY_16_BYTES \ - lwi r7, r6, 0; \ - lwi r8, r6, 4; \ - lwi r9, r6, 8; \ - lwi r10, r6, 12; \ - swi r7, r5, 0; \ - swi r8, r5, 4; \ - swi r9, r5, 8; \ - swi r10, r5, 12 - - -/* FIXME DCACHE_LINE_BYTES (CONFIG_XILINX_MICROBLAZE0_DCACHE_LINE_LEN * 4)*/ -#define DCACHE_LINE_BYTES (4 * 4) - -.globl copy_page; -.align 4; -copy_page: - ori r11, r0, (PAGE_SIZE/DCACHE_LINE_BYTES) - 1 -_copy_page_loop: - COPY_16_BYTES -#if DCACHE_LINE_BYTES >= 32 - COPY_16_BYTES -#endif - addik r6, r6, DCACHE_LINE_BYTES - addik r5, r5, DCACHE_LINE_BYTES - bneid r11, _copy_page_loop - addik r11, r11, -1 - rtsd r15, 8 - nop + .size early_console_reg_tlb_alloc, . - early_console_reg_tlb_alloc diff --git a/arch/microblaze/kernel/module.c b/arch/microblaze/kernel/module.c index 5a45b1adfef..0e73f660654 100644 --- a/arch/microblaze/kernel/module.c +++ b/arch/microblaze/kernel/module.c @@ -12,11 +12,11 @@ #include <linux/kernel.h> #include <linux/elf.h> #include <linux/vmalloc.h> -#include <linux/slab.h> #include <linux/fs.h> #include <linux/string.h> #include <asm/pgtable.h> +#include <asm/cacheflush.h> void *module_alloc(unsigned long size) { @@ -152,6 +152,7 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab, int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs, struct module *module) { + flush_dcache(); return 0; } diff --git a/arch/microblaze/kernel/of_device.c b/arch/microblaze/kernel/of_device.c index 9a0f7632c47..b372787886e 100644 --- a/arch/microblaze/kernel/of_device.c +++ b/arch/microblaze/kernel/of_device.c @@ -12,7 +12,7 @@ void of_device_make_bus_id(struct of_device *dev) { static atomic_t bus_no_reg_magic; - struct device_node *node = dev->node; + struct device_node *node = dev->dev.of_node; const u32 *reg; u64 addr; int magic; @@ -49,11 +49,10 @@ struct of_device *of_device_alloc(struct device_node *np, if (!dev) return NULL; - dev->node = of_node_get(np); - dev->dev.dma_mask = &dev->dma_mask; + dev->dev.of_node = of_node_get(np); + dev->dev.dma_mask = &dev->archdata.dma_mask; dev->dev.parent = parent; dev->dev.release = of_release_dev; - dev->dev.archdata.of_node = np; if (bus_id) dev_set_name(&dev->dev, bus_id); @@ -75,17 +74,17 @@ int of_device_uevent(struct device *dev, struct kobj_uevent_env *env) ofdev = to_of_device(dev); - if (add_uevent_var(env, "OF_NAME=%s", ofdev->node->name)) + if (add_uevent_var(env, "OF_NAME=%s", ofdev->dev.of_node->name)) return -ENOMEM; - if (add_uevent_var(env, "OF_TYPE=%s", ofdev->node->type)) + if (add_uevent_var(env, "OF_TYPE=%s", ofdev->dev.of_node->type)) return -ENOMEM; /* Since the compatible field can contain pretty much anything * it's not really legal to split it out with commas. We split it * up using a number of environment variables instead. */ - compat = of_get_property(ofdev->node, "compatible", &cplen); + compat = of_get_property(ofdev->dev.of_node, "compatible", &cplen); while (compat && *compat && cplen > 0) { if (add_uevent_var(env, "OF_COMPATIBLE_%d=%s", seen, compat)) return -ENOMEM; diff --git a/arch/microblaze/kernel/of_platform.c b/arch/microblaze/kernel/of_platform.c index acf4574d0f1..ccf6f4257f4 100644 --- a/arch/microblaze/kernel/of_platform.c +++ b/arch/microblaze/kernel/of_platform.c @@ -17,7 +17,6 @@ #include <linux/init.h> #include <linux/module.h> #include <linux/mod_devicetable.h> -#include <linux/slab.h> #include <linux/pci.h> #include <linux/of.h> #include <linux/of_device.h> @@ -48,7 +47,7 @@ struct of_device *of_platform_device_create(struct device_node *np, if (!dev) return NULL; - dev->dma_mask = 0xffffffffUL; + dev->archdata.dma_mask = 0xffffffffUL; dev->dev.bus = &of_platform_bus_type; /* We do not fill the DMA ops for platform devices by default. @@ -167,7 +166,7 @@ EXPORT_SYMBOL(of_platform_bus_probe); static int of_dev_node_match(struct device *dev, void *data) { - return to_of_device(dev)->node == data; + return to_of_device(dev)->dev.of_node == data; } struct of_device *of_find_device_by_node(struct device_node *np) @@ -185,7 +184,7 @@ EXPORT_SYMBOL(of_find_device_by_node); static int of_dev_phandle_match(struct device *dev, void *data) { phandle *ph = data; - return to_of_device(dev)->node->linux_phandle == *ph; + return to_of_device(dev)->dev.of_node->phandle == *ph; } struct of_device *of_find_device_by_phandle(phandle ph) diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c index 812f1bf06c9..09bed44dfcd 100644 --- a/arch/microblaze/kernel/process.c +++ b/arch/microblaze/kernel/process.c @@ -15,6 +15,7 @@ #include <linux/bitops.h> #include <asm/system.h> #include <asm/pgalloc.h> +#include <asm/uaccess.h> /* for USER_DS macros */ #include <asm/cacheflush.h> void show_regs(struct pt_regs *regs) @@ -74,7 +75,10 @@ __setup("hlt", hlt_setup); void default_idle(void) { - if (!hlt_counter) { + if (likely(hlt_counter)) { + while (!need_resched()) + cpu_relax(); + } else { clear_thread_flag(TIF_POLLING_NRFLAG); smp_mb__after_clear_bit(); local_irq_disable(); @@ -82,9 +86,7 @@ void default_idle(void) cpu_sleep(); local_irq_enable(); set_thread_flag(TIF_POLLING_NRFLAG); - } else - while (!need_resched()) - cpu_relax(); + } } void cpu_idle(void) diff --git a/arch/microblaze/kernel/prom.c b/arch/microblaze/kernel/prom.c index b817df172aa..a15ef6d67ca 100644 --- a/arch/microblaze/kernel/prom.c +++ b/arch/microblaze/kernel/prom.c @@ -42,698 +42,21 @@ #include <asm/sections.h> #include <asm/pci-bridge.h> -static int __initdata dt_root_addr_cells; -static int __initdata dt_root_size_cells; - -typedef u32 cell_t; - -static struct boot_param_header *initial_boot_params; - -/* export that to outside world */ -struct device_node *of_chosen; - -static inline char *find_flat_dt_string(u32 offset) -{ - return ((char *)initial_boot_params) + - initial_boot_params->off_dt_strings + offset; -} - -/** - * This function is used to scan the flattened device-tree, it is - * used to extract the memory informations at boot before we can - * unflatten the tree - */ -int __init of_scan_flat_dt(int (*it)(unsigned long node, - const char *uname, int depth, - void *data), - void *data) -{ - unsigned long p = ((unsigned long)initial_boot_params) + - initial_boot_params->off_dt_struct; - int rc = 0; - int depth = -1; - - do { - u32 tag = *((u32 *)p); - char *pathp; - - p += 4; - if (tag == OF_DT_END_NODE) { - depth--; - continue; - } - if (tag == OF_DT_NOP) - continue; - if (tag == OF_DT_END) - break; - if (tag == OF_DT_PROP) { - u32 sz = *((u32 *)p); - p += 8; - if (initial_boot_params->version < 0x10) - p = _ALIGN(p, sz >= 8 ? 8 : 4); - p += sz; - p = _ALIGN(p, 4); - continue; - } - if (tag != OF_DT_BEGIN_NODE) { - printk(KERN_WARNING "Invalid tag %x scanning flattened" - " device tree !\n", tag); - return -EINVAL; - } - depth++; - pathp = (char *)p; - p = _ALIGN(p + strlen(pathp) + 1, 4); - if ((*pathp) == '/') { - char *lp, *np; - for (lp = NULL, np = pathp; *np; np++) - if ((*np) == '/') - lp = np+1; - if (lp != NULL) - pathp = lp; - } - rc = it(p, pathp, depth, data); - if (rc != 0) - break; - } while (1); - - return rc; -} - -unsigned long __init of_get_flat_dt_root(void) -{ - unsigned long p = ((unsigned long)initial_boot_params) + - initial_boot_params->off_dt_struct; - - while (*((u32 *)p) == OF_DT_NOP) - p += 4; - BUG_ON(*((u32 *)p) != OF_DT_BEGIN_NODE); - p += 4; - return _ALIGN(p + strlen((char *)p) + 1, 4); -} - -/** - * This function can be used within scan_flattened_dt callback to get - * access to properties - */ -void *__init of_get_flat_dt_prop(unsigned long node, const char *name, - unsigned long *size) -{ - unsigned long p = node; - - do { - u32 tag = *((u32 *)p); - u32 sz, noff; - const char *nstr; - - p += 4; - if (tag == OF_DT_NOP) - continue; - if (tag != OF_DT_PROP) - return NULL; - - sz = *((u32 *)p); - noff = *((u32 *)(p + 4)); - p += 8; - if (initial_boot_params->version < 0x10) - p = _ALIGN(p, sz >= 8 ? 8 : 4); - - nstr = find_flat_dt_string(noff); - if (nstr == NULL) { - printk(KERN_WARNING "Can't find property index" - " name !\n"); - return NULL; - } - if (strcmp(name, nstr) == 0) { - if (size) - *size = sz; - return (void *)p; - } - p += sz; - p = _ALIGN(p, 4); - } while (1); -} - -int __init of_flat_dt_is_compatible(unsigned long node, const char *compat) -{ - const char *cp; - unsigned long cplen, l; - - cp = of_get_flat_dt_prop(node, "compatible", &cplen); - if (cp == NULL) - return 0; - while (cplen > 0) { - if (strncasecmp(cp, compat, strlen(compat)) == 0) - return 1; - l = strlen(cp) + 1; - cp += l; - cplen -= l; - } - - return 0; -} - -static void *__init unflatten_dt_alloc(unsigned long *mem, unsigned long size, - unsigned long align) -{ - void *res; - - *mem = _ALIGN(*mem, align); - res = (void *)*mem; - *mem += size; - - return res; -} - -static unsigned long __init unflatten_dt_node(unsigned long mem, - unsigned long *p, - struct device_node *dad, - struct device_node ***allnextpp, - unsigned long fpsize) -{ - struct device_node *np; - struct property *pp, **prev_pp = NULL; - char *pathp; - u32 tag; - unsigned int l, allocl; - int has_name = 0; - int new_format = 0; - - tag = *((u32 *)(*p)); - if (tag != OF_DT_BEGIN_NODE) { - printk("Weird tag at start of node: %x\n", tag); - return mem; - } - *p += 4; - pathp = (char *)*p; - l = allocl = strlen(pathp) + 1; - *p = _ALIGN(*p + l, 4); - - /* version 0x10 has a more compact unit name here instead of the full - * path. we accumulate the full path size using "fpsize", we'll rebuild - * it later. We detect this because the first character of the name is - * not '/'. - */ - if ((*pathp) != '/') { - new_format = 1; - if (fpsize == 0) { - /* root node: special case. fpsize accounts for path - * plus terminating zero. root node only has '/', so - * fpsize should be 2, but we want to avoid the first - * level nodes to have two '/' so we use fpsize 1 here - */ - fpsize = 1; - allocl = 2; - } else { - /* account for '/' and path size minus terminal 0 - * already in 'l' - */ - fpsize += l; - allocl = fpsize; - } - } - - np = unflatten_dt_alloc(&mem, sizeof(struct device_node) + allocl, - __alignof__(struct device_node)); - if (allnextpp) { - memset(np, 0, sizeof(*np)); - np->full_name = ((char *)np) + sizeof(struct device_node); - if (new_format) { - char *p2 = np->full_name; - /* rebuild full path for new format */ - if (dad && dad->parent) { - strcpy(p2, dad->full_name); -#ifdef DEBUG - if ((strlen(p2) + l + 1) != allocl) { - pr_debug("%s: p: %d, l: %d, a: %d\n", - pathp, (int)strlen(p2), - l, allocl); - } -#endif - p2 += strlen(p2); - } - *(p2++) = '/'; - memcpy(p2, pathp, l); - } else - memcpy(np->full_name, pathp, l); - prev_pp = &np->properties; - **allnextpp = np; - *allnextpp = &np->allnext; - if (dad != NULL) { - np->parent = dad; - /* we temporarily use the next field as `last_child'*/ - if (dad->next == NULL) - dad->child = np; - else - dad->next->sibling = np; - dad->next = np; - } - kref_init(&np->kref); - } - while (1) { - u32 sz, noff; - char *pname; - - tag = *((u32 *)(*p)); - if (tag == OF_DT_NOP) { - *p += 4; - continue; - } - if (tag != OF_DT_PROP) - break; - *p += 4; - sz = *((u32 *)(*p)); - noff = *((u32 *)((*p) + 4)); - *p += 8; - if (initial_boot_params->version < 0x10) - *p = _ALIGN(*p, sz >= 8 ? 8 : 4); - - pname = find_flat_dt_string(noff); - if (pname == NULL) { - printk(KERN_INFO - "Can't find property name in list !\n"); - break; - } - if (strcmp(pname, "name") == 0) - has_name = 1; - l = strlen(pname) + 1; - pp = unflatten_dt_alloc(&mem, sizeof(struct property), - __alignof__(struct property)); - if (allnextpp) { - if (strcmp(pname, "linux,phandle") == 0) { - np->node = *((u32 *)*p); - if (np->linux_phandle == 0) - np->linux_phandle = np->node; - } - if (strcmp(pname, "ibm,phandle") == 0) - np->linux_phandle = *((u32 *)*p); - pp->name = pname; - pp->length = sz; - pp->value = (void *)*p; - *prev_pp = pp; - prev_pp = &pp->next; - } - *p = _ALIGN((*p) + sz, 4); - } - /* with version 0x10 we may not have the name property, recreate - * it here from the unit name if absent - */ - if (!has_name) { - char *p1 = pathp, *ps = pathp, *pa = NULL; - int sz; - - while (*p1) { - if ((*p1) == '@') - pa = p1; - if ((*p1) == '/') - ps = p1 + 1; - p1++; - } - if (pa < ps) - pa = p1; - sz = (pa - ps) + 1; - pp = unflatten_dt_alloc(&mem, sizeof(struct property) + sz, - __alignof__(struct property)); - if (allnextpp) { - pp->name = "name"; - pp->length = sz; - pp->value = pp + 1; - *prev_pp = pp; - prev_pp = &pp->next; - memcpy(pp->value, ps, sz - 1); - ((char *)pp->value)[sz - 1] = 0; - pr_debug("fixed up name for %s -> %s\n", pathp, - (char *)pp->value); - } - } - if (allnextpp) { - *prev_pp = NULL; - np->name = of_get_property(np, "name", NULL); - np->type = of_get_property(np, "device_type", NULL); - - if (!np->name) - np->name = "<NULL>"; - if (!np->type) - np->type = "<NULL>"; - } - while (tag == OF_DT_BEGIN_NODE) { - mem = unflatten_dt_node(mem, p, np, allnextpp, fpsize); - tag = *((u32 *)(*p)); - } - if (tag != OF_DT_END_NODE) { - printk(KERN_INFO "Weird tag at end of node: %x\n", tag); - return mem; - } - *p += 4; - return mem; -} - -/** - * unflattens the device-tree passed by the firmware, creating the - * tree of struct device_node. It also fills the "name" and "type" - * pointers of the nodes so the normal device-tree walking functions - * can be used (this used to be done by finish_device_tree) - */ -void __init unflatten_device_tree(void) -{ - unsigned long start, mem, size; - struct device_node **allnextp = &allnodes; - - pr_debug(" -> unflatten_device_tree()\n"); - - /* First pass, scan for size */ - start = ((unsigned long)initial_boot_params) + - initial_boot_params->off_dt_struct; - size = unflatten_dt_node(0, &start, NULL, NULL, 0); - size = (size | 3) + 1; - - pr_debug(" size is %lx, allocating...\n", size); - - /* Allocate memory for the expanded device tree */ - mem = lmb_alloc(size + 4, __alignof__(struct device_node)); - mem = (unsigned long) __va(mem); - - ((u32 *)mem)[size / 4] = 0xdeadbeef; - - pr_debug(" unflattening %lx...\n", mem); - - /* Second pass, do actual unflattening */ - start = ((unsigned long)initial_boot_params) + - initial_boot_params->off_dt_struct; - unflatten_dt_node(mem, &start, NULL, &allnextp, 0); - if (*((u32 *)start) != OF_DT_END) - printk(KERN_WARNING "Weird tag at end of tree: %08x\n", - *((u32 *)start)); - if (((u32 *)mem)[size / 4] != 0xdeadbeef) - printk(KERN_WARNING "End of tree marker overwritten: %08x\n", - ((u32 *)mem)[size / 4]); - *allnextp = NULL; - - /* Get pointer to OF "/chosen" node for use everywhere */ - of_chosen = of_find_node_by_path("/chosen"); - if (of_chosen == NULL) - of_chosen = of_find_node_by_path("/chosen@0"); - - pr_debug(" <- unflatten_device_tree()\n"); -} - -#define early_init_dt_scan_drconf_memory(node) 0 - -static int __init early_init_dt_scan_cpus(unsigned long node, - const char *uname, int depth, - void *data) -{ - static int logical_cpuid; - char *type = of_get_flat_dt_prop(node, "device_type", NULL); - const u32 *intserv; - int i, nthreads; - int found = 0; - - /* We are scanning "cpu" nodes only */ - if (type == NULL || strcmp(type, "cpu") != 0) - return 0; - - /* Get physical cpuid */ - intserv = of_get_flat_dt_prop(node, "reg", NULL); - nthreads = 1; - - /* - * Now see if any of these threads match our boot cpu. - * NOTE: This must match the parsing done in smp_setup_cpu_maps. - */ - for (i = 0; i < nthreads; i++) { - /* - * version 2 of the kexec param format adds the phys cpuid of - * booted proc. - */ - if (initial_boot_params && initial_boot_params->version >= 2) { - if (intserv[i] == - initial_boot_params->boot_cpuid_phys) { - found = 1; - break; - } - } else { - /* - * Check if it's the boot-cpu, set it's hw index now, - * unfortunately this format did not support booting - * off secondary threads. - */ - if (of_get_flat_dt_prop(node, - "linux,boot-cpu", NULL) != NULL) { - found = 1; - break; - } - } - -#ifdef CONFIG_SMP - /* logical cpu id is always 0 on UP kernels */ - logical_cpuid++; -#endif - } - - if (found) { - pr_debug("boot cpu: logical %d physical %d\n", logical_cpuid, - intserv[i]); - boot_cpuid = logical_cpuid; - } - - return 0; -} - -#ifdef CONFIG_BLK_DEV_INITRD -static void __init early_init_dt_check_for_initrd(unsigned long node) -{ - unsigned long l; - u32 *prop; - - pr_debug("Looking for initrd properties... "); - - prop = of_get_flat_dt_prop(node, "linux,initrd-start", &l); - if (prop) { - initrd_start = (unsigned long) - __va((u32)of_read_ulong(prop, l/4)); - - prop = of_get_flat_dt_prop(node, "linux,initrd-end", &l); - if (prop) { - initrd_end = (unsigned long) - __va((u32)of_read_ulong(prop, 1/4)); - initrd_below_start_ok = 1; - } else { - initrd_start = 0; - } - } - - pr_debug("initrd_start=0x%lx initrd_end=0x%lx\n", - initrd_start, initrd_end); -} -#else -static inline void early_init_dt_check_for_initrd(unsigned long node) -{ -} -#endif /* CONFIG_BLK_DEV_INITRD */ - -static int __init early_init_dt_scan_chosen(unsigned long node, - const char *uname, int depth, void *data) -{ - unsigned long l; - char *p; - - pr_debug("search \"chosen\", depth: %d, uname: %s\n", depth, uname); - - if (depth != 1 || - (strcmp(uname, "chosen") != 0 && - strcmp(uname, "chosen@0") != 0)) - return 0; - -#ifdef CONFIG_KEXEC - lprop = (u64 *)of_get_flat_dt_prop(node, - "linux,crashkernel-base", NULL); - if (lprop) - crashk_res.start = *lprop; - - lprop = (u64 *)of_get_flat_dt_prop(node, - "linux,crashkernel-size", NULL); - if (lprop) - crashk_res.end = crashk_res.start + *lprop - 1; -#endif - - early_init_dt_check_for_initrd(node); - - /* Retreive command line */ - p = of_get_flat_dt_prop(node, "bootargs", &l); - if (p != NULL && l > 0) - strlcpy(cmd_line, p, min((int)l, COMMAND_LINE_SIZE)); - -#ifdef CONFIG_CMDLINE -#ifndef CONFIG_CMDLINE_FORCE - if (p == NULL || l == 0 || (l == 1 && (*p) == 0)) -#endif - strlcpy(cmd_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE); -#endif /* CONFIG_CMDLINE */ - - pr_debug("Command line is: %s\n", cmd_line); - - /* break now */ - return 1; -} - -static int __init early_init_dt_scan_root(unsigned long node, - const char *uname, int depth, void *data) -{ - u32 *prop; - - if (depth != 0) - return 0; - - prop = of_get_flat_dt_prop(node, "#size-cells", NULL); - dt_root_size_cells = (prop == NULL) ? 1 : *prop; - pr_debug("dt_root_size_cells = %x\n", dt_root_size_cells); - - prop = of_get_flat_dt_prop(node, "#address-cells", NULL); - dt_root_addr_cells = (prop == NULL) ? 2 : *prop; - pr_debug("dt_root_addr_cells = %x\n", dt_root_addr_cells); - - /* break now */ - return 1; -} - -static u64 __init dt_mem_next_cell(int s, cell_t **cellp) +void __init early_init_dt_scan_chosen_arch(unsigned long node) { - cell_t *p = *cellp; - - *cellp = p + s; - return of_read_number(p, s); + /* No Microblaze specific code here */ } -static int __init early_init_dt_scan_memory(unsigned long node, - const char *uname, int depth, void *data) +void __init early_init_dt_add_memory_arch(u64 base, u64 size) { - char *type = of_get_flat_dt_prop(node, "device_type", NULL); - cell_t *reg, *endp; - unsigned long l; - - /* Look for the ibm,dynamic-reconfiguration-memory node */ -/* if (depth == 1 && - strcmp(uname, "ibm,dynamic-reconfiguration-memory") == 0) - return early_init_dt_scan_drconf_memory(node); -*/ - /* We are scanning "memory" nodes only */ - if (type == NULL) { - /* - * The longtrail doesn't have a device_type on the - * /memory node, so look for the node called /memory@0. - */ - if (depth != 1 || strcmp(uname, "memory@0") != 0) - return 0; - } else if (strcmp(type, "memory") != 0) - return 0; - - reg = (cell_t *)of_get_flat_dt_prop(node, "linux,usable-memory", &l); - if (reg == NULL) - reg = (cell_t *)of_get_flat_dt_prop(node, "reg", &l); - if (reg == NULL) - return 0; - - endp = reg + (l / sizeof(cell_t)); - - pr_debug("memory scan node %s, reg size %ld, data: %x %x %x %x,\n", - uname, l, reg[0], reg[1], reg[2], reg[3]); - - while ((endp - reg) >= (dt_root_addr_cells + dt_root_size_cells)) { - u64 base, size; - - base = dt_mem_next_cell(dt_root_addr_cells, ®); - size = dt_mem_next_cell(dt_root_size_cells, ®); - - if (size == 0) - continue; - pr_debug(" - %llx , %llx\n", (unsigned long long)base, - (unsigned long long)size); - - lmb_add(base, size); - } - return 0; + lmb_add(base, size); } -#ifdef CONFIG_PHYP_DUMP -/** - * phyp_dump_calculate_reserve_size() - reserve variable boot area 5% or arg - * - * Function to find the largest size we need to reserve - * during early boot process. - * - * It either looks for boot param and returns that OR - * returns larger of 256 or 5% rounded down to multiples of 256MB. - * - */ -static inline unsigned long phyp_dump_calculate_reserve_size(void) +u64 __init early_init_dt_alloc_memory_arch(u64 size, u64 align) { - unsigned long tmp; - - if (phyp_dump_info->reserve_bootvar) - return phyp_dump_info->reserve_bootvar; - - /* divide by 20 to get 5% of value */ - tmp = lmb_end_of_DRAM(); - do_div(tmp, 20); - - /* round it down in multiples of 256 */ - tmp = tmp & ~0x0FFFFFFFUL; - - return (tmp > PHYP_DUMP_RMR_END ? tmp : PHYP_DUMP_RMR_END); + return lmb_alloc(size, align); } -/** - * phyp_dump_reserve_mem() - reserve all not-yet-dumped mmemory - * - * This routine may reserve memory regions in the kernel only - * if the system is supported and a dump was taken in last - * boot instance or if the hardware is supported and the - * scratch area needs to be setup. In other instances it returns - * without reserving anything. The memory in case of dump being - * active is freed when the dump is collected (by userland tools). - */ -static void __init phyp_dump_reserve_mem(void) -{ - unsigned long base, size; - unsigned long variable_reserve_size; - - if (!phyp_dump_info->phyp_dump_configured) { - printk(KERN_ERR "Phyp-dump not supported on this hardware\n"); - return; - } - - if (!phyp_dump_info->phyp_dump_at_boot) { - printk(KERN_INFO "Phyp-dump disabled at boot time\n"); - return; - } - - variable_reserve_size = phyp_dump_calculate_reserve_size(); - - if (phyp_dump_info->phyp_dump_is_active) { - /* Reserve *everything* above RMR.Area freed by userland tools*/ - base = variable_reserve_size; - size = lmb_end_of_DRAM() - base; - - /* XXX crashed_ram_end is wrong, since it may be beyond - * the memory_limit, it will need to be adjusted. */ - lmb_reserve(base, size); - - phyp_dump_info->init_reserve_start = base; - phyp_dump_info->init_reserve_size = size; - } else { - size = phyp_dump_info->cpu_state_size + - phyp_dump_info->hpte_region_size + - variable_reserve_size; - base = lmb_end_of_DRAM() - size; - lmb_reserve(base, size); - phyp_dump_info->init_reserve_start = base; - phyp_dump_info->init_reserve_size = size; - } -} -#else -static inline void __init phyp_dump_reserve_mem(void) {} -#endif /* CONFIG_PHYP_DUMP && CONFIG_PPC_RTAS */ - #ifdef CONFIG_EARLY_PRINTK /* MS this is Microblaze specifig function */ static int __init early_init_dt_scan_serial(unsigned long node, @@ -775,11 +98,6 @@ void __init early_init_devtree(void *params) /* Setup flat device-tree pointer */ initial_boot_params = params; -#ifdef CONFIG_PHYP_DUMP - /* scan tree to see if dump occured during last boot */ - of_scan_flat_dt(early_init_dt_scan_phyp_dump, NULL); -#endif - /* Retrieve various informations from the /chosen node of the * device-tree, including the platform type, initrd location and * size, TCE reserve, and more ... @@ -799,33 +117,18 @@ void __init early_init_devtree(void *params) pr_debug("Phys. mem: %lx\n", (unsigned long) lmb_phys_mem_size()); - pr_debug("Scanning CPUs ...\n"); - - /* Retreive CPU related informations from the flat tree - * (altivec support, boot CPU ID, ...) - */ - of_scan_flat_dt(early_init_dt_scan_cpus, NULL); - pr_debug(" <- early_init_devtree()\n"); } -/** - * Indicates whether the root node has a given value in its - * compatible property. - */ -int machine_is_compatible(const char *compat) +#ifdef CONFIG_BLK_DEV_INITRD +void __init early_init_dt_setup_initrd_arch(unsigned long start, + unsigned long end) { - struct device_node *root; - int rc = 0; - - root = of_find_node_by_path("/"); - if (root) { - rc = of_device_is_compatible(root, compat); - of_node_put(root); - } - return rc; + initrd_start = (unsigned long)__va(start); + initrd_end = (unsigned long)__va(end); + initrd_below_start_ok = 1; } -EXPORT_SYMBOL(machine_is_compatible); +#endif /******* * @@ -838,273 +141,6 @@ EXPORT_SYMBOL(machine_is_compatible); * *******/ -/** - * of_find_node_by_phandle - Find a node given a phandle - * @handle: phandle of the node to find - * - * Returns a node pointer with refcount incremented, use - * of_node_put() on it when done. - */ -struct device_node *of_find_node_by_phandle(phandle handle) -{ - struct device_node *np; - - read_lock(&devtree_lock); - for (np = allnodes; np != NULL; np = np->allnext) - if (np->linux_phandle == handle) - break; - of_node_get(np); - read_unlock(&devtree_lock); - return np; -} -EXPORT_SYMBOL(of_find_node_by_phandle); - -/** - * of_node_get - Increment refcount of a node - * @node: Node to inc refcount, NULL is supported to - * simplify writing of callers - * - * Returns node. - */ -struct device_node *of_node_get(struct device_node *node) -{ - if (node) - kref_get(&node->kref); - return node; -} -EXPORT_SYMBOL(of_node_get); - -static inline struct device_node *kref_to_device_node(struct kref *kref) -{ - return container_of(kref, struct device_node, kref); -} - -/** - * of_node_release - release a dynamically allocated node - * @kref: kref element of the node to be released - * - * In of_node_put() this function is passed to kref_put() - * as the destructor. - */ -static void of_node_release(struct kref *kref) -{ - struct device_node *node = kref_to_device_node(kref); - struct property *prop = node->properties; - - /* We should never be releasing nodes that haven't been detached. */ - if (!of_node_check_flag(node, OF_DETACHED)) { - printk(KERN_INFO "WARNING: Bad of_node_put() on %s\n", - node->full_name); - dump_stack(); - kref_init(&node->kref); - return; - } - - if (!of_node_check_flag(node, OF_DYNAMIC)) - return; - - while (prop) { - struct property *next = prop->next; - kfree(prop->name); - kfree(prop->value); - kfree(prop); - prop = next; - - if (!prop) { - prop = node->deadprops; - node->deadprops = NULL; - } - } - kfree(node->full_name); - kfree(node->data); - kfree(node); -} - -/** - * of_node_put - Decrement refcount of a node - * @node: Node to dec refcount, NULL is supported to - * simplify writing of callers - * - */ -void of_node_put(struct device_node *node) -{ - if (node) - kref_put(&node->kref, of_node_release); -} -EXPORT_SYMBOL(of_node_put); - -/* - * Plug a device node into the tree and global list. - */ -void of_attach_node(struct device_node *np) -{ - unsigned long flags; - - write_lock_irqsave(&devtree_lock, flags); - np->sibling = np->parent->child; - np->allnext = allnodes; - np->parent->child = np; - allnodes = np; - write_unlock_irqrestore(&devtree_lock, flags); -} - -/* - * "Unplug" a node from the device tree. The caller must hold - * a reference to the node. The memory associated with the node - * is not freed until its refcount goes to zero. - */ -void of_detach_node(struct device_node *np) -{ - struct device_node *parent; - unsigned long flags; - - write_lock_irqsave(&devtree_lock, flags); - - parent = np->parent; - if (!parent) - goto out_unlock; - - if (allnodes == np) - allnodes = np->allnext; - else { - struct device_node *prev; - for (prev = allnodes; - prev->allnext != np; - prev = prev->allnext) - ; - prev->allnext = np->allnext; - } - - if (parent->child == np) - parent->child = np->sibling; - else { - struct device_node *prevsib; - for (prevsib = np->parent->child; - prevsib->sibling != np; - prevsib = prevsib->sibling) - ; - prevsib->sibling = np->sibling; - } - - of_node_set_flag(np, OF_DETACHED); - -out_unlock: - write_unlock_irqrestore(&devtree_lock, flags); -} - -/* - * Add a property to a node - */ -int prom_add_property(struct device_node *np, struct property *prop) -{ - struct property **next; - unsigned long flags; - - prop->next = NULL; - write_lock_irqsave(&devtree_lock, flags); - next = &np->properties; - while (*next) { - if (strcmp(prop->name, (*next)->name) == 0) { - /* duplicate ! don't insert it */ - write_unlock_irqrestore(&devtree_lock, flags); - return -1; - } - next = &(*next)->next; - } - *next = prop; - write_unlock_irqrestore(&devtree_lock, flags); - -#ifdef CONFIG_PROC_DEVICETREE - /* try to add to proc as well if it was initialized */ - if (np->pde) - proc_device_tree_add_prop(np->pde, prop); -#endif /* CONFIG_PROC_DEVICETREE */ - - return 0; -} - -/* - * Remove a property from a node. Note that we don't actually - * remove it, since we have given out who-knows-how-many pointers - * to the data using get-property. Instead we just move the property - * to the "dead properties" list, so it won't be found any more. - */ -int prom_remove_property(struct device_node *np, struct property *prop) -{ - struct property **next; - unsigned long flags; - int found = 0; - - write_lock_irqsave(&devtree_lock, flags); - next = &np->properties; - while (*next) { - if (*next == prop) { - /* found the node */ - *next = prop->next; - prop->next = np->deadprops; - np->deadprops = prop; - found = 1; - break; - } - next = &(*next)->next; - } - write_unlock_irqrestore(&devtree_lock, flags); - - if (!found) - return -ENODEV; - -#ifdef CONFIG_PROC_DEVICETREE - /* try to remove the proc node as well */ - if (np->pde) - proc_device_tree_remove_prop(np->pde, prop); -#endif /* CONFIG_PROC_DEVICETREE */ - - return 0; -} - -/* - * Update a property in a node. Note that we don't actually - * remove it, since we have given out who-knows-how-many pointers - * to the data using get-property. Instead we just move the property - * to the "dead properties" list, and add the new property to the - * property list - */ -int prom_update_property(struct device_node *np, - struct property *newprop, - struct property *oldprop) -{ - struct property **next; - unsigned long flags; - int found = 0; - - write_lock_irqsave(&devtree_lock, flags); - next = &np->properties; - while (*next) { - if (*next == oldprop) { - /* found the node */ - newprop->next = oldprop->next; - *next = newprop; - oldprop->next = np->deadprops; - np->deadprops = oldprop; - found = 1; - break; - } - next = &(*next)->next; - } - write_unlock_irqrestore(&devtree_lock, flags); - - if (!found) - return -ENODEV; - -#ifdef CONFIG_PROC_DEVICETREE - /* try to add to proc as well if it was initialized */ - if (np->pde) - proc_device_tree_update_prop(np->pde, newprop, oldprop); -#endif /* CONFIG_PROC_DEVICETREE */ - - return 0; -} - #if defined(CONFIG_DEBUG_FS) && defined(DEBUG) static struct debugfs_blob_wrapper flat_dt_blob; diff --git a/arch/microblaze/kernel/ptrace.c b/arch/microblaze/kernel/ptrace.c index 4b3ac32754d..a4a7770c614 100644 --- a/arch/microblaze/kernel/ptrace.c +++ b/arch/microblaze/kernel/ptrace.c @@ -75,29 +75,8 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) { int rval; unsigned long val = 0; - unsigned long copied; switch (request) { - case PTRACE_PEEKTEXT: /* read word at location addr. */ - case PTRACE_PEEKDATA: - pr_debug("PEEKTEXT/PEEKDATA at %08lX\n", addr); - copied = access_process_vm(child, addr, &val, sizeof(val), 0); - rval = -EIO; - if (copied != sizeof(val)) - break; - rval = put_user(val, (unsigned long *)data); - break; - - case PTRACE_POKETEXT: /* write the word at location addr. */ - case PTRACE_POKEDATA: - pr_debug("POKETEXT/POKEDATA to %08lX\n", addr); - rval = 0; - if (access_process_vm(child, addr, &data, sizeof(data), 1) - == sizeof(data)) - break; - rval = -EIO; - break; - /* Read/write the word at location ADDR in the registers. */ case PTRACE_PEEKUSR: case PTRACE_POKEUSR: @@ -130,50 +109,8 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) if (rval == 0 && request == PTRACE_PEEKUSR) rval = put_user(val, (unsigned long *)data); break; - /* Continue and stop at next (return from) syscall */ - case PTRACE_SYSCALL: - pr_debug("PTRACE_SYSCALL\n"); - case PTRACE_SINGLESTEP: - pr_debug("PTRACE_SINGLESTEP\n"); - /* Restart after a signal. */ - case PTRACE_CONT: - pr_debug("PTRACE_CONT\n"); - rval = -EIO; - if (!valid_signal(data)) - break; - - if (request == PTRACE_SYSCALL) - set_tsk_thread_flag(child, TIF_SYSCALL_TRACE); - else - clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); - - child->exit_code = data; - pr_debug("wakeup_process\n"); - wake_up_process(child); - rval = 0; - break; - - /* - * make the child exit. Best I can do is send it a sigkill. - * perhaps it should be put in the status that it wants to - * exit. - */ - case PTRACE_KILL: - pr_debug("PTRACE_KILL\n"); - rval = 0; - if (child->exit_state == EXIT_ZOMBIE) /* already dead */ - break; - child->exit_code = SIGKILL; - wake_up_process(child); - break; - - case PTRACE_DETACH: /* detach a process that was attached. */ - pr_debug("PTRACE_DETACH\n"); - rval = ptrace_detach(child, data); - break; default: - /* rval = ptrace_request(child, request, addr, data); noMMU */ - rval = -EIO; + rval = ptrace_request(child, request, addr, data); } return rval; } diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c index 5372b24ad04..17c98dbcec8 100644 --- a/arch/microblaze/kernel/setup.c +++ b/arch/microblaze/kernel/setup.c @@ -22,7 +22,10 @@ #include <linux/io.h> #include <linux/bug.h> #include <linux/param.h> +#include <linux/pci.h> #include <linux/cache.h> +#include <linux/of_platform.h> +#include <linux/dma-mapping.h> #include <asm/cacheflush.h> #include <asm/entry.h> #include <asm/cpuinfo.h> @@ -54,13 +57,10 @@ void __init setup_arch(char **cmdline_p) microblaze_cache_init(); - enable_dcache(); - - invalidate_icache(); - enable_icache(); - setup_memory(); + xilinx_pci_init(); + #if defined(CONFIG_SELFMOD_INTC) || defined(CONFIG_SELFMOD_TIMER) printk(KERN_NOTICE "Self modified code enable\n"); #endif @@ -92,6 +92,12 @@ inline unsigned get_romfs_len(unsigned *addr) } #endif /* CONFIG_MTD_UCLINUX_EBSS */ +#if defined(CONFIG_EARLY_PRINTK) && defined(CONFIG_SERIAL_UARTLITE_CONSOLE) +#define eprintk early_printk +#else +#define eprintk printk +#endif + void __init machine_early_init(const char *cmdline, unsigned int ram, unsigned int fdt, unsigned int msr) { @@ -139,32 +145,32 @@ void __init machine_early_init(const char *cmdline, unsigned int ram, setup_early_printk(NULL); #endif - early_printk("Ramdisk addr 0x%08x, ", ram); + eprintk("Ramdisk addr 0x%08x, ", ram); if (fdt) - early_printk("FDT at 0x%08x\n", fdt); + eprintk("FDT at 0x%08x\n", fdt); else - early_printk("Compiled-in FDT at 0x%08x\n", + eprintk("Compiled-in FDT at 0x%08x\n", (unsigned int)_fdt_start); #ifdef CONFIG_MTD_UCLINUX - early_printk("Found romfs @ 0x%08x (0x%08x)\n", + eprintk("Found romfs @ 0x%08x (0x%08x)\n", romfs_base, romfs_size); - early_printk("#### klimit %p ####\n", old_klimit); + eprintk("#### klimit %p ####\n", old_klimit); BUG_ON(romfs_size < 0); /* What else can we do? */ - early_printk("Moved 0x%08x bytes from 0x%08x to 0x%08x\n", + eprintk("Moved 0x%08x bytes from 0x%08x to 0x%08x\n", romfs_size, romfs_base, (unsigned)&_ebss); - early_printk("New klimit: 0x%08x\n", (unsigned)klimit); + eprintk("New klimit: 0x%08x\n", (unsigned)klimit); #endif #if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR if (msr) - early_printk("!!!Your kernel has setup MSR instruction but " + eprintk("!!!Your kernel has setup MSR instruction but " "CPU don't have it %d\n", msr); #else if (!msr) - early_printk("!!!Your kernel not setup MSR instruction but " + eprintk("!!!Your kernel not setup MSR instruction but " "CPU have it %d\n", msr); #endif @@ -187,3 +193,37 @@ static int microblaze_debugfs_init(void) } arch_initcall(microblaze_debugfs_init); #endif + +static int dflt_bus_notify(struct notifier_block *nb, + unsigned long action, void *data) +{ + struct device *dev = data; + + /* We are only intereted in device addition */ + if (action != BUS_NOTIFY_ADD_DEVICE) + return 0; + + set_dma_ops(dev, &dma_direct_ops); + + return NOTIFY_DONE; +} + +static struct notifier_block dflt_plat_bus_notifier = { + .notifier_call = dflt_bus_notify, + .priority = INT_MAX, +}; + +static struct notifier_block dflt_of_bus_notifier = { + .notifier_call = dflt_bus_notify, + .priority = INT_MAX, +}; + +static int __init setup_bus_notifier(void) +{ + bus_register_notifier(&platform_bus_type, &dflt_plat_bus_notifier); + bus_register_notifier(&of_platform_bus_type, &dflt_of_bus_notifier); + + return 0; +} + +arch_initcall(setup_bus_notifier); diff --git a/arch/microblaze/kernel/sys_microblaze.c b/arch/microblaze/kernel/sys_microblaze.c index 9f3c205fb75..f4e00b7f125 100644 --- a/arch/microblaze/kernel/sys_microblaze.c +++ b/arch/microblaze/kernel/sys_microblaze.c @@ -30,6 +30,7 @@ #include <linux/semaphore.h> #include <linux/uaccess.h> #include <linux/unistd.h> +#include <linux/slab.h> #include <asm/syscalls.h> diff --git a/arch/microblaze/kernel/traps.c b/arch/microblaze/kernel/traps.c index eaaaf805f31..75e49202a5e 100644 --- a/arch/microblaze/kernel/traps.c +++ b/arch/microblaze/kernel/traps.c @@ -22,13 +22,11 @@ void trap_init(void) __enable_hw_exceptions(); } -static int kstack_depth_to_print = 24; +static unsigned long kstack_depth_to_print = 24; static int __init kstack_setup(char *s) { - kstack_depth_to_print = strict_strtoul(s, 0, NULL); - - return 1; + return !strict_strtoul(s, 0, &kstack_depth_to_print); } __setup("kstack=", kstack_setup); @@ -97,37 +95,3 @@ void dump_stack(void) show_stack(NULL, NULL); } EXPORT_SYMBOL(dump_stack); - -#ifdef CONFIG_MMU -void __bug(const char *file, int line, void *data) -{ - if (data) - printk(KERN_CRIT "kernel BUG at %s:%d (data = %p)!\n", - file, line, data); - else - printk(KERN_CRIT "kernel BUG at %s:%d!\n", file, line); - - machine_halt(); -} - -int bad_trap(int trap_num, struct pt_regs *regs) -{ - printk(KERN_CRIT - "unimplemented trap %d called at 0x%08lx, pid %d!\n", - trap_num, regs->pc, current->pid); - return -ENOSYS; -} - -int debug_trap(struct pt_regs *regs) -{ - int i; - printk(KERN_CRIT "debug trap\n"); - for (i = 0; i < 32; i++) { - /* printk("r%i:%08X\t",i,regs->gpr[i]); */ - if ((i % 4) == 3) - printk(KERN_CRIT "\n"); - } - printk(KERN_CRIT "pc:%08lX\tmsr:%08lX\n", regs->pc, regs->msr); - return -ENOSYS; -} -#endif diff --git a/arch/microblaze/kernel/vmlinux.lds.S b/arch/microblaze/kernel/vmlinux.lds.S index 5ef619aad63..db72d712460 100644 --- a/arch/microblaze/kernel/vmlinux.lds.S +++ b/arch/microblaze/kernel/vmlinux.lds.S @@ -24,7 +24,8 @@ SECTIONS { .text : AT(ADDR(.text) - LOAD_OFFSET) { _text = . ; _stext = . ; - *(.text .text.*) + HEAD_TEXT + TEXT_TEXT *(.fixup) EXIT_TEXT EXIT_CALL diff --git a/arch/microblaze/lib/Makefile b/arch/microblaze/lib/Makefile index b579db068c0..4dfe47d3cd9 100644 --- a/arch/microblaze/lib/Makefile +++ b/arch/microblaze/lib/Makefile @@ -10,5 +10,4 @@ else lib-y += memcpy.o memmove.o endif -lib-$(CONFIG_NO_MMU) += uaccess.o -lib-$(CONFIG_MMU) += uaccess_old.o +lib-y += uaccess_old.o diff --git a/arch/microblaze/lib/fastcopy.S b/arch/microblaze/lib/fastcopy.S index 02e3ab4eddf..fdc48bb065d 100644 --- a/arch/microblaze/lib/fastcopy.S +++ b/arch/microblaze/lib/fastcopy.S @@ -30,8 +30,9 @@ */ #include <linux/linkage.h> - + .text .globl memcpy + .type memcpy, @function .ent memcpy memcpy: @@ -345,9 +346,11 @@ a_done: rtsd r15, 8 nop +.size memcpy, . - memcpy .end memcpy /*----------------------------------------------------------------------------*/ .globl memmove + .type memmove, @function .ent memmove memmove: @@ -659,4 +662,5 @@ d_done: rtsd r15, 8 nop +.size memmove, . - memmove .end memmove diff --git a/arch/microblaze/lib/memcpy.c b/arch/microblaze/lib/memcpy.c index cc2108b6b26..014bac92bdf 100644 --- a/arch/microblaze/lib/memcpy.c +++ b/arch/microblaze/lib/memcpy.c @@ -53,7 +53,7 @@ void *memcpy(void *v_dst, const void *v_src, __kernel_size_t c) const uint32_t *i_src; uint32_t *i_dst; - if (c >= 4) { + if (likely(c >= 4)) { unsigned value, buf_hold; /* Align the dstination to a word boundry. */ diff --git a/arch/microblaze/lib/memset.c b/arch/microblaze/lib/memset.c index 4df851d41a2..ecfb663e1fc 100644 --- a/arch/microblaze/lib/memset.c +++ b/arch/microblaze/lib/memset.c @@ -33,22 +33,23 @@ #ifdef __HAVE_ARCH_MEMSET void *memset(void *v_src, int c, __kernel_size_t n) { - char *src = v_src; #ifdef CONFIG_OPT_LIB_FUNCTION uint32_t *i_src; - uint32_t w32; + uint32_t w32 = 0; #endif /* Truncate c to 8 bits */ c = (c & 0xFF); #ifdef CONFIG_OPT_LIB_FUNCTION - /* Make a repeating word out of it */ - w32 = c; - w32 |= w32 << 8; - w32 |= w32 << 16; + if (unlikely(c)) { + /* Make a repeating word out of it */ + w32 = c; + w32 |= w32 << 8; + w32 |= w32 << 16; + } - if (n >= 4) { + if (likely(n >= 4)) { /* Align the destination to a word boundary */ /* This is done in an endian independant manner */ switch ((unsigned) src & 3) { diff --git a/arch/microblaze/lib/uaccess.c b/arch/microblaze/lib/uaccess.c deleted file mode 100644 index a853fe089c4..00000000000 --- a/arch/microblaze/lib/uaccess.c +++ /dev/null @@ -1,48 +0,0 @@ -/* - * Copyright (C) 2006 Atmark Techno, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#include <linux/string.h> -#include <asm/uaccess.h> - -#include <asm/bug.h> - -long strnlen_user(const char __user *src, long count) -{ - return strlen(src) + 1; -} - -#define __do_strncpy_from_user(dst, src, count, res) \ - do { \ - char *tmp; \ - strncpy(dst, src, count); \ - for (tmp = dst; *tmp && count > 0; tmp++, count--) \ - ; \ - res = (tmp - dst); \ - } while (0) - -long __strncpy_from_user(char *dst, const char __user *src, long count) -{ - long res; - __do_strncpy_from_user(dst, src, count, res); - return res; -} - -long strncpy_from_user(char *dst, const char __user *src, long count) -{ - long res = -EFAULT; - if (access_ok(VERIFY_READ, src, 1)) - __do_strncpy_from_user(dst, src, count, res); - return res; -} - -unsigned long __copy_tofrom_user(void __user *to, - const void __user *from, unsigned long size) -{ - memcpy(to, from, size); - return 0; -} diff --git a/arch/microblaze/lib/uaccess_old.S b/arch/microblaze/lib/uaccess_old.S index 67f991c14b8..5810cec54a7 100644 --- a/arch/microblaze/lib/uaccess_old.S +++ b/arch/microblaze/lib/uaccess_old.S @@ -22,6 +22,7 @@ .text .globl __strncpy_user; +.type __strncpy_user, @function .align 4; __strncpy_user: @@ -50,7 +51,7 @@ __strncpy_user: 3: rtsd r15,8 nop - + .size __strncpy_user, . - __strncpy_user .section .fixup, "ax" .align 2 @@ -72,6 +73,7 @@ __strncpy_user: .text .globl __strnlen_user; +.type __strnlen_user, @function .align 4; __strnlen_user: addik r3,r6,0 @@ -90,7 +92,7 @@ __strnlen_user: 3: rtsd r15,8 nop - + .size __strnlen_user, . - __strnlen_user .section .fixup,"ax" 4: @@ -108,6 +110,7 @@ __strnlen_user: */ .text .globl __copy_tofrom_user; +.type __copy_tofrom_user, @function .align 4; __copy_tofrom_user: /* @@ -116,20 +119,34 @@ __copy_tofrom_user: * r7, r3 - count * r4 - tempval */ - addik r3,r7,0 - beqi r3,3f -1: - lbu r4,r6,r0 - addik r6,r6,1 -2: - sb r4,r5,r0 - addik r3,r3,-1 - bneid r3,1b - addik r5,r5,1 /* delay slot */ + beqid r7, 3f /* zero size is not likely */ + andi r3, r7, 0x3 /* filter add count */ + bneid r3, 4f /* if is odd value then byte copying */ + or r3, r5, r6 /* find if is any to/from unaligned */ + andi r3, r3, 0x3 /* mask unaligned */ + bneid r3, 1f /* it is unaligned -> then jump */ + or r3, r0, r0 + +/* at least one 4 byte copy */ +5: lw r4, r6, r3 +6: sw r4, r5, r3 + addik r7, r7, -4 + bneid r7, 5b + addik r3, r3, 4 + addik r3, r7, 0 + rtsd r15, 8 + nop +4: or r3, r0, r0 +1: lbu r4,r6,r3 +2: sb r4,r5,r3 + addik r7,r7,-1 + bneid r7,1b + addik r3,r3,1 /* delay slot */ 3: + addik r3,r7,0 rtsd r15,8 nop - + .size __copy_tofrom_user, . - __copy_tofrom_user .section __ex_table,"a" - .word 1b,3b,2b,3b + .word 1b,3b,2b,3b,5b,3b,6b,3b diff --git a/arch/microblaze/mm/Makefile b/arch/microblaze/mm/Makefile index 6c8a924d9e2..09c49ed8723 100644 --- a/arch/microblaze/mm/Makefile +++ b/arch/microblaze/mm/Makefile @@ -2,6 +2,6 @@ # Makefile # -obj-y := init.o +obj-y := consistent.o init.o obj-$(CONFIG_MMU) += pgtable.o mmu_context.o fault.o diff --git a/arch/microblaze/mm/consistent.c b/arch/microblaze/mm/consistent.c new file mode 100644 index 00000000000..5a59dad62bd --- /dev/null +++ b/arch/microblaze/mm/consistent.c @@ -0,0 +1,255 @@ +/* + * Microblaze support for cache consistent memory. + * Copyright (C) 2010 Michal Simek <monstr@monstr.eu> + * Copyright (C) 2010 PetaLogix + * Copyright (C) 2005 John Williams <jwilliams@itee.uq.edu.au> + * + * Based on PowerPC version derived from arch/arm/mm/consistent.c + * Copyright (C) 2001 Dan Malek (dmalek@jlc.net) + * Copyright (C) 2000 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/string.h> +#include <linux/types.h> +#include <linux/ptrace.h> +#include <linux/mman.h> +#include <linux/mm.h> +#include <linux/swap.h> +#include <linux/stddef.h> +#include <linux/vmalloc.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/bootmem.h> +#include <linux/highmem.h> +#include <linux/pci.h> +#include <linux/interrupt.h> +#include <linux/gfp.h> + +#include <asm/pgalloc.h> +#include <linux/io.h> +#include <linux/hardirq.h> +#include <asm/mmu_context.h> +#include <asm/mmu.h> +#include <linux/uaccess.h> +#include <asm/pgtable.h> +#include <asm/cpuinfo.h> +#include <asm/tlbflush.h> + +#ifndef CONFIG_MMU +/* I have to use dcache values because I can't relate on ram size */ +# define UNCACHED_SHADOW_MASK (cpuinfo.dcache_high - cpuinfo.dcache_base + 1) +#endif + +/* + * Consistent memory allocators. Used for DMA devices that want to + * share uncached memory with the processor core. + * My crufty no-MMU approach is simple. In the HW platform we can optionally + * mirror the DDR up above the processor cacheable region. So, memory accessed + * in this mirror region will not be cached. It's alloced from the same + * pool as normal memory, but the handle we return is shifted up into the + * uncached region. This will no doubt cause big problems if memory allocated + * here is not also freed properly. -- JW + */ +void *consistent_alloc(int gfp, size_t size, dma_addr_t *dma_handle) +{ + unsigned long order, vaddr; + void *ret; + unsigned int i, err = 0; + struct page *page, *end; + +#ifdef CONFIG_MMU + phys_addr_t pa; + struct vm_struct *area; + unsigned long va; +#endif + + if (in_interrupt()) + BUG(); + + /* Only allocate page size areas. */ + size = PAGE_ALIGN(size); + order = get_order(size); + + vaddr = __get_free_pages(gfp, order); + if (!vaddr) + return NULL; + + /* + * we need to ensure that there are no cachelines in use, + * or worse dirty in this area. + */ + flush_dcache_range(virt_to_phys((void *)vaddr), + virt_to_phys((void *)vaddr) + size); + +#ifndef CONFIG_MMU + ret = (void *)vaddr; + /* + * Here's the magic! Note if the uncached shadow is not implemented, + * it's up to the calling code to also test that condition and make + * other arranegments, such as manually flushing the cache and so on. + */ +# ifdef CONFIG_XILINX_UNCACHED_SHADOW + ret = (void *)((unsigned) ret | UNCACHED_SHADOW_MASK); +# endif + if ((unsigned int)ret > cpuinfo.dcache_base && + (unsigned int)ret < cpuinfo.dcache_high) + printk(KERN_WARNING + "ERROR: Your cache coherent area is CACHED!!!\n"); + + /* dma_handle is same as physical (shadowed) address */ + *dma_handle = (dma_addr_t)ret; +#else + /* Allocate some common virtual space to map the new pages. */ + area = get_vm_area(size, VM_ALLOC); + if (!area) { + free_pages(vaddr, order); + return NULL; + } + va = (unsigned long) area->addr; + ret = (void *)va; + + /* This gives us the real physical address of the first page. */ + *dma_handle = pa = virt_to_bus((void *)vaddr); +#endif + + /* + * free wasted pages. We skip the first page since we know + * that it will have count = 1 and won't require freeing. + * We also mark the pages in use as reserved so that + * remap_page_range works. + */ + page = virt_to_page(vaddr); + end = page + (1 << order); + + split_page(page, order); + + for (i = 0; i < size && err == 0; i += PAGE_SIZE) { +#ifdef CONFIG_MMU + /* MS: This is the whole magic - use cache inhibit pages */ + err = map_page(va + i, pa + i, _PAGE_KERNEL | _PAGE_NO_CACHE); +#endif + + SetPageReserved(page); + page++; + } + + /* Free the otherwise unused pages. */ + while (page < end) { + __free_page(page); + page++; + } + + if (err) { + free_pages(vaddr, order); + return NULL; + } + + return ret; +} +EXPORT_SYMBOL(consistent_alloc); + +/* + * free page(s) as defined by the above mapping. + */ +void consistent_free(size_t size, void *vaddr) +{ + struct page *page; + + if (in_interrupt()) + BUG(); + + size = PAGE_ALIGN(size); + +#ifndef CONFIG_MMU + /* Clear SHADOW_MASK bit in address, and free as per usual */ +# ifdef CONFIG_XILINX_UNCACHED_SHADOW + vaddr = (void *)((unsigned)vaddr & ~UNCACHED_SHADOW_MASK); +# endif + page = virt_to_page(vaddr); + + do { + ClearPageReserved(page); + __free_page(page); + page++; + } while (size -= PAGE_SIZE); +#else + do { + pte_t *ptep; + unsigned long pfn; + + ptep = pte_offset_kernel(pmd_offset(pgd_offset_k( + (unsigned int)vaddr), + (unsigned int)vaddr), + (unsigned int)vaddr); + if (!pte_none(*ptep) && pte_present(*ptep)) { + pfn = pte_pfn(*ptep); + pte_clear(&init_mm, (unsigned int)vaddr, ptep); + if (pfn_valid(pfn)) { + page = pfn_to_page(pfn); + + ClearPageReserved(page); + __free_page(page); + } + } + vaddr += PAGE_SIZE; + } while (size -= PAGE_SIZE); + + /* flush tlb */ + flush_tlb_all(); +#endif +} +EXPORT_SYMBOL(consistent_free); + +/* + * make an area consistent. + */ +void consistent_sync(void *vaddr, size_t size, int direction) +{ + unsigned long start; + unsigned long end; + + start = (unsigned long)vaddr; + + /* Convert start address back down to unshadowed memory region */ +#ifdef CONFIG_XILINX_UNCACHED_SHADOW + start &= ~UNCACHED_SHADOW_MASK; +#endif + end = start + size; + + switch (direction) { + case PCI_DMA_NONE: + BUG(); + case PCI_DMA_FROMDEVICE: /* invalidate only */ + invalidate_dcache_range(start, end); + break; + case PCI_DMA_TODEVICE: /* writeback only */ + flush_dcache_range(start, end); + break; + case PCI_DMA_BIDIRECTIONAL: /* writeback and invalidate */ + flush_dcache_range(start, end); + break; + } +} +EXPORT_SYMBOL(consistent_sync); + +/* + * consistent_sync_page makes memory consistent. identical + * to consistent_sync, but takes a struct page instead of a + * virtual address + */ +void consistent_sync_page(struct page *page, unsigned long offset, + size_t size, int direction) +{ + unsigned long start = (unsigned long)page_address(page) + offset; + consistent_sync((void *)start, size, direction); +} +EXPORT_SYMBOL(consistent_sync_page); diff --git a/arch/microblaze/mm/fault.c b/arch/microblaze/mm/fault.c index d9d249a66ff..bab92299318 100644 --- a/arch/microblaze/mm/fault.c +++ b/arch/microblaze/mm/fault.c @@ -106,7 +106,7 @@ void do_page_fault(struct pt_regs *regs, unsigned long address, regs->esr = error_code; /* On a kernel SLB miss we can only check for a valid exception entry */ - if (kernel_mode(regs) && (address >= TASK_SIZE)) { + if (unlikely(kernel_mode(regs) && (address >= TASK_SIZE))) { printk(KERN_WARNING "kernel task_size exceed"); _exception(SIGSEGV, regs, code, address); } @@ -122,7 +122,7 @@ void do_page_fault(struct pt_regs *regs, unsigned long address, } #endif /* CONFIG_KGDB */ - if (in_atomic() || !mm) { + if (unlikely(in_atomic() || !mm)) { if (kernel_mode(regs)) goto bad_area_nosemaphore; @@ -150,7 +150,7 @@ void do_page_fault(struct pt_regs *regs, unsigned long address, * source. If this is invalid we can skip the address space check, * thus avoiding the deadlock. */ - if (!down_read_trylock(&mm->mmap_sem)) { + if (unlikely(!down_read_trylock(&mm->mmap_sem))) { if (kernel_mode(regs) && !search_exception_tables(regs->pc)) goto bad_area_nosemaphore; @@ -158,16 +158,16 @@ void do_page_fault(struct pt_regs *regs, unsigned long address, } vma = find_vma(mm, address); - if (!vma) + if (unlikely(!vma)) goto bad_area; if (vma->vm_start <= address) goto good_area; - if (!(vma->vm_flags & VM_GROWSDOWN)) + if (unlikely(!(vma->vm_flags & VM_GROWSDOWN))) goto bad_area; - if (!is_write) + if (unlikely(!is_write)) goto bad_area; /* @@ -179,7 +179,7 @@ void do_page_fault(struct pt_regs *regs, unsigned long address, * before setting the user r1. Thus we allow the stack to * expand to 1MB without further checks. */ - if (address + 0x100000 < vma->vm_end) { + if (unlikely(address + 0x100000 < vma->vm_end)) { /* get user regs even if this fault is in kernel mode */ struct pt_regs *uregs = current->thread.regs; @@ -209,15 +209,15 @@ good_area: code = SEGV_ACCERR; /* a write */ - if (is_write) { - if (!(vma->vm_flags & VM_WRITE)) + if (unlikely(is_write)) { + if (unlikely(!(vma->vm_flags & VM_WRITE))) goto bad_area; /* a read */ } else { /* protection fault */ - if (error_code & 0x08000000) + if (unlikely(error_code & 0x08000000)) goto bad_area; - if (!(vma->vm_flags & (VM_READ | VM_EXEC))) + if (unlikely(!(vma->vm_flags & (VM_READ | VM_EXEC)))) goto bad_area; } @@ -235,7 +235,7 @@ survive: goto do_sigbus; BUG(); } - if (fault & VM_FAULT_MAJOR) + if (unlikely(fault & VM_FAULT_MAJOR)) current->maj_flt++; else current->min_flt++; @@ -273,16 +273,11 @@ bad_area_nosemaphore: * us unable to handle the page fault gracefully. */ out_of_memory: - if (current->pid == 1) { - yield(); - down_read(&mm->mmap_sem); - goto survive; - } up_read(&mm->mmap_sem); - printk(KERN_WARNING "VM: killing process %s\n", current->comm); - if (user_mode(regs)) - do_exit(SIGKILL); - bad_page_fault(regs, address, SIGKILL); + if (!user_mode(regs)) + bad_page_fault(regs, address, SIGKILL); + else + pagefault_out_of_memory(); return; do_sigbus: diff --git a/arch/microblaze/mm/init.c b/arch/microblaze/mm/init.c index a57cedf3671..cca3579d426 100644 --- a/arch/microblaze/mm/init.c +++ b/arch/microblaze/mm/init.c @@ -15,6 +15,7 @@ #include <linux/initrd.h> #include <linux/pagemap.h> #include <linux/pfn.h> +#include <linux/slab.h> #include <linux/swap.h> #include <asm/page.h> @@ -23,6 +24,9 @@ #include <asm/sections.h> #include <asm/tlb.h> +/* Use for MMU and noMMU because of PCI generic code */ +int mem_init_done; + #ifndef CONFIG_MMU unsigned int __page_offset; EXPORT_SYMBOL(__page_offset); @@ -30,7 +34,6 @@ EXPORT_SYMBOL(__page_offset); #else DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); -int mem_init_done; static int init_bootmem_done; #endif /* CONFIG_MMU */ @@ -44,6 +47,7 @@ unsigned long memory_start; EXPORT_SYMBOL(memory_start); unsigned long memory_end; /* due to mm/nommu.c */ unsigned long memory_size; +EXPORT_SYMBOL(memory_size); /* * paging_init() sets up the page tables - in fact we've already done this. @@ -163,7 +167,6 @@ void free_init_pages(char *what, unsigned long begin, unsigned long end) for (addr = begin; addr < end; addr += PAGE_SIZE) { ClearPageReserved(virt_to_page(addr)); init_page_count(virt_to_page(addr)); - memset((void *)addr, 0xcc, PAGE_SIZE); free_page(addr); totalram_pages++; } @@ -193,12 +196,6 @@ void free_initmem(void) (unsigned long)(&__init_end)); } -/* FIXME from arch/powerpc/mm/mem.c*/ -void show_mem(void) -{ - printk(KERN_NOTICE "%s\n", __func__); -} - void __init mem_init(void) { high_memory = (void *)__va(memory_end); @@ -208,20 +205,14 @@ void __init mem_init(void) printk(KERN_INFO "Memory: %luk/%luk available\n", nr_free_pages() << (PAGE_SHIFT-10), num_physpages << (PAGE_SHIFT-10)); -#ifdef CONFIG_MMU mem_init_done = 1; -#endif } #ifndef CONFIG_MMU -/* Check against bounds of physical memory */ -int ___range_ok(unsigned long addr, unsigned long size) +int page_is_ram(unsigned long pfn) { - return ((addr < memory_start) || - ((addr + size) > memory_end)); + return __range_ok(pfn, 0); } -EXPORT_SYMBOL(___range_ok); - #else int page_is_ram(unsigned long pfn) { @@ -349,4 +340,27 @@ void __init *early_get_page(void) } return p; } + #endif /* CONFIG_MMU */ + +void * __init_refok alloc_maybe_bootmem(size_t size, gfp_t mask) +{ + if (mem_init_done) + return kmalloc(size, mask); + else + return alloc_bootmem(size); +} + +void * __init_refok zalloc_maybe_bootmem(size_t size, gfp_t mask) +{ + void *p; + + if (mem_init_done) + p = kzalloc(size, mask); + else { + p = alloc_bootmem(size); + if (p) + memset(p, 0, size); + } + return p; +} diff --git a/arch/microblaze/mm/pgtable.c b/arch/microblaze/mm/pgtable.c index 2820081b21a..59bf2335a4c 100644 --- a/arch/microblaze/mm/pgtable.c +++ b/arch/microblaze/mm/pgtable.c @@ -42,6 +42,7 @@ unsigned long ioremap_base; unsigned long ioremap_bot; +EXPORT_SYMBOL(ioremap_bot); /* The maximum lowmem defaults to 768Mb, but this can be configured to * another value. @@ -103,7 +104,7 @@ static void __iomem *__ioremap(phys_addr_t addr, unsigned long size, area = get_vm_area(size, VM_IOREMAP); if (area == NULL) return NULL; - v = VMALLOC_VMADDR(area->addr); + v = (unsigned long) area->addr; } else { v = (ioremap_bot -= size); } @@ -154,31 +155,13 @@ int map_page(unsigned long va, phys_addr_t pa, int flags) err = 0; set_pte_at(&init_mm, va, pg, pfn_pte(pa >> PAGE_SHIFT, __pgprot(flags))); - if (mem_init_done) + if (unlikely(mem_init_done)) flush_HPTE(0, va, pmd_val(*pd)); /* flush_HPTE(0, va, pg); */ } return err; } -void __init adjust_total_lowmem(void) -{ -/* TBD */ -#if 0 - unsigned long max_low_mem = MAX_LOW_MEM; - - if (total_lowmem > max_low_mem) { - total_lowmem = max_low_mem; -#ifndef CONFIG_HIGHMEM - printk(KERN_INFO "Warning, memory limited to %ld Mb, use " - "CONFIG_HIGHMEM to reach %ld Mb\n", - max_low_mem >> 20, total_memory >> 20); - total_memory = total_lowmem; -#endif /* CONFIG_HIGHMEM */ - } -#endif -} - /* * Map in all of physical memory starting at CONFIG_KERNEL_START. */ @@ -206,24 +189,6 @@ void __init mapin_ram(void) /* is x a power of 2? */ #define is_power_of_2(x) ((x) != 0 && (((x) & ((x) - 1)) == 0)) -/* - * Set up a mapping for a block of I/O. - * virt, phys, size must all be page-aligned. - * This should only be called before ioremap is called. - */ -void __init io_block_mapping(unsigned long virt, phys_addr_t phys, - unsigned int size, int flags) -{ - int i; - - if (virt > CONFIG_KERNEL_START && virt < ioremap_bot) - ioremap_bot = ioremap_base = virt; - - /* Put it in the page tables. */ - for (i = 0; i < size; i += PAGE_SIZE) - map_page(virt + i, phys + i, flags); -} - /* Scan the real Linux page tables and return a PTE pointer for * a virtual address in a context. * Returns true (1) if PTE was found, zero otherwise. The pointer to @@ -274,3 +239,18 @@ unsigned long iopa(unsigned long addr) return pa; } + +__init_refok pte_t *pte_alloc_one_kernel(struct mm_struct *mm, + unsigned long address) +{ + pte_t *pte; + if (mem_init_done) { + pte = (pte_t *)__get_free_page(GFP_KERNEL | + __GFP_REPEAT | __GFP_ZERO); + } else { + pte = (pte_t *)early_get_page(); + if (pte) + clear_page(pte); + } + return pte; +} diff --git a/arch/microblaze/pci/Makefile b/arch/microblaze/pci/Makefile new file mode 100644 index 00000000000..9889cc2e129 --- /dev/null +++ b/arch/microblaze/pci/Makefile @@ -0,0 +1,6 @@ +# +# Makefile +# + +obj-$(CONFIG_PCI) += pci_32.o pci-common.o indirect_pci.o iomap.o +obj-$(CONFIG_PCI_XILINX) += xilinx_pci.o diff --git a/arch/microblaze/pci/indirect_pci.c b/arch/microblaze/pci/indirect_pci.c new file mode 100644 index 00000000000..25f18f017f2 --- /dev/null +++ b/arch/microblaze/pci/indirect_pci.c @@ -0,0 +1,163 @@ +/* + * Support for indirect PCI bridges. + * + * Copyright (C) 1998 Gabriel Paubert. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/string.h> +#include <linux/init.h> + +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/pci-bridge.h> + +static int +indirect_read_config(struct pci_bus *bus, unsigned int devfn, int offset, + int len, u32 *val) +{ + struct pci_controller *hose = pci_bus_to_host(bus); + volatile void __iomem *cfg_data; + u8 cfg_type = 0; + u32 bus_no, reg; + + if (hose->indirect_type & INDIRECT_TYPE_NO_PCIE_LINK) { + if (bus->number != hose->first_busno) + return PCIBIOS_DEVICE_NOT_FOUND; + if (devfn != 0) + return PCIBIOS_DEVICE_NOT_FOUND; + } + + if (hose->indirect_type & INDIRECT_TYPE_SET_CFG_TYPE) + if (bus->number != hose->first_busno) + cfg_type = 1; + + bus_no = (bus->number == hose->first_busno) ? + hose->self_busno : bus->number; + + if (hose->indirect_type & INDIRECT_TYPE_EXT_REG) + reg = ((offset & 0xf00) << 16) | (offset & 0xfc); + else + reg = offset & 0xfc; /* Only 3 bits for function */ + + if (hose->indirect_type & INDIRECT_TYPE_BIG_ENDIAN) + out_be32(hose->cfg_addr, (0x80000000 | (bus_no << 16) | + (devfn << 8) | reg | cfg_type)); + else + out_le32(hose->cfg_addr, (0x80000000 | (bus_no << 16) | + (devfn << 8) | reg | cfg_type)); + + /* + * Note: the caller has already checked that offset is + * suitably aligned and that len is 1, 2 or 4. + */ + cfg_data = hose->cfg_data + (offset & 3); /* Only 3 bits for function */ + switch (len) { + case 1: + *val = in_8(cfg_data); + break; + case 2: + *val = in_le16(cfg_data); + break; + default: + *val = in_le32(cfg_data); + break; + } + return PCIBIOS_SUCCESSFUL; +} + +static int +indirect_write_config(struct pci_bus *bus, unsigned int devfn, int offset, + int len, u32 val) +{ + struct pci_controller *hose = pci_bus_to_host(bus); + volatile void __iomem *cfg_data; + u8 cfg_type = 0; + u32 bus_no, reg; + + if (hose->indirect_type & INDIRECT_TYPE_NO_PCIE_LINK) { + if (bus->number != hose->first_busno) + return PCIBIOS_DEVICE_NOT_FOUND; + if (devfn != 0) + return PCIBIOS_DEVICE_NOT_FOUND; + } + + if (hose->indirect_type & INDIRECT_TYPE_SET_CFG_TYPE) + if (bus->number != hose->first_busno) + cfg_type = 1; + + bus_no = (bus->number == hose->first_busno) ? + hose->self_busno : bus->number; + + if (hose->indirect_type & INDIRECT_TYPE_EXT_REG) + reg = ((offset & 0xf00) << 16) | (offset & 0xfc); + else + reg = offset & 0xfc; + + if (hose->indirect_type & INDIRECT_TYPE_BIG_ENDIAN) + out_be32(hose->cfg_addr, (0x80000000 | (bus_no << 16) | + (devfn << 8) | reg | cfg_type)); + else + out_le32(hose->cfg_addr, (0x80000000 | (bus_no << 16) | + (devfn << 8) | reg | cfg_type)); + + /* surpress setting of PCI_PRIMARY_BUS */ + if (hose->indirect_type & INDIRECT_TYPE_SURPRESS_PRIMARY_BUS) + if ((offset == PCI_PRIMARY_BUS) && + (bus->number == hose->first_busno)) + val &= 0xffffff00; + + /* Workaround for PCI_28 Errata in 440EPx/GRx */ + if ((hose->indirect_type & INDIRECT_TYPE_BROKEN_MRM) && + offset == PCI_CACHE_LINE_SIZE) { + val = 0; + } + + /* + * Note: the caller has already checked that offset is + * suitably aligned and that len is 1, 2 or 4. + */ + cfg_data = hose->cfg_data + (offset & 3); + switch (len) { + case 1: + out_8(cfg_data, val); + break; + case 2: + out_le16(cfg_data, val); + break; + default: + out_le32(cfg_data, val); + break; + } + + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops indirect_pci_ops = { + .read = indirect_read_config, + .write = indirect_write_config, +}; + +void __init +setup_indirect_pci(struct pci_controller *hose, + resource_size_t cfg_addr, + resource_size_t cfg_data, u32 flags) +{ + resource_size_t base = cfg_addr & PAGE_MASK; + void __iomem *mbase; + + mbase = ioremap(base, PAGE_SIZE); + hose->cfg_addr = mbase + (cfg_addr & ~PAGE_MASK); + if ((cfg_data & PAGE_MASK) != base) + mbase = ioremap(cfg_data & PAGE_MASK, PAGE_SIZE); + hose->cfg_data = mbase + (cfg_data & ~PAGE_MASK); + hose->ops = &indirect_pci_ops; + hose->indirect_type = flags; +} diff --git a/arch/microblaze/pci/iomap.c b/arch/microblaze/pci/iomap.c new file mode 100644 index 00000000000..3fbf16f4e16 --- /dev/null +++ b/arch/microblaze/pci/iomap.c @@ -0,0 +1,39 @@ +/* + * ppc64 "iomap" interface implementation. + * + * (C) Copyright 2004 Linus Torvalds + */ +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/mm.h> +#include <asm/io.h> +#include <asm/pci-bridge.h> + +void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max) +{ + resource_size_t start = pci_resource_start(dev, bar); + resource_size_t len = pci_resource_len(dev, bar); + unsigned long flags = pci_resource_flags(dev, bar); + + if (!len) + return NULL; + if (max && len > max) + len = max; + if (flags & IORESOURCE_IO) + return ioport_map(start, len); + if (flags & IORESOURCE_MEM) + return ioremap(start, len); + /* What? */ + return NULL; +} +EXPORT_SYMBOL(pci_iomap); + +void pci_iounmap(struct pci_dev *dev, void __iomem *addr) +{ + if (isa_vaddr_is_ioport(addr)) + return; + if (pcibios_vaddr_is_ioport(addr)) + return; + iounmap(addr); +} +EXPORT_SYMBOL(pci_iounmap); diff --git a/arch/microblaze/pci/pci-common.c b/arch/microblaze/pci/pci-common.c new file mode 100644 index 00000000000..9cb782b8e03 --- /dev/null +++ b/arch/microblaze/pci/pci-common.c @@ -0,0 +1,1642 @@ +/* + * Contains common pci routines for ALL ppc platform + * (based on pci_32.c and pci_64.c) + * + * Port for PPC64 David Engebretsen, IBM Corp. + * Contains common pci routines for ppc64 platform, pSeries and iSeries brands. + * + * Copyright (C) 2003 Anton Blanchard <anton@au.ibm.com>, IBM + * Rework, based on alpha PCI code. + * + * Common pmac/prep/chrp pci routines. -- Cort + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/string.h> +#include <linux/init.h> +#include <linux/bootmem.h> +#include <linux/mm.h> +#include <linux/list.h> +#include <linux/syscalls.h> +#include <linux/irq.h> +#include <linux/vmalloc.h> +#include <linux/slab.h> + +#include <asm/processor.h> +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/pci-bridge.h> +#include <asm/byteorder.h> + +static DEFINE_SPINLOCK(hose_spinlock); +LIST_HEAD(hose_list); + +/* XXX kill that some day ... */ +static int global_phb_number; /* Global phb counter */ + +/* ISA Memory physical address */ +resource_size_t isa_mem_base; + +/* Default PCI flags is 0 on ppc32, modified at boot on ppc64 */ +unsigned int pci_flags; + +static struct dma_map_ops *pci_dma_ops = &dma_direct_ops; + +void set_pci_dma_ops(struct dma_map_ops *dma_ops) +{ + pci_dma_ops = dma_ops; +} + +struct dma_map_ops *get_pci_dma_ops(void) +{ + return pci_dma_ops; +} +EXPORT_SYMBOL(get_pci_dma_ops); + +int pci_set_dma_mask(struct pci_dev *dev, u64 mask) +{ + return dma_set_mask(&dev->dev, mask); +} + +int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask) +{ + int rc; + + rc = dma_set_mask(&dev->dev, mask); + dev->dev.coherent_dma_mask = dev->dma_mask; + + return rc; +} + +struct pci_controller *pcibios_alloc_controller(struct device_node *dev) +{ + struct pci_controller *phb; + + phb = zalloc_maybe_bootmem(sizeof(struct pci_controller), GFP_KERNEL); + if (!phb) + return NULL; + spin_lock(&hose_spinlock); + phb->global_number = global_phb_number++; + list_add_tail(&phb->list_node, &hose_list); + spin_unlock(&hose_spinlock); + phb->dn = dev; + phb->is_dynamic = mem_init_done; + return phb; +} + +void pcibios_free_controller(struct pci_controller *phb) +{ + spin_lock(&hose_spinlock); + list_del(&phb->list_node); + spin_unlock(&hose_spinlock); + + if (phb->is_dynamic) + kfree(phb); +} + +static resource_size_t pcibios_io_size(const struct pci_controller *hose) +{ + return hose->io_resource.end - hose->io_resource.start + 1; +} + +int pcibios_vaddr_is_ioport(void __iomem *address) +{ + int ret = 0; + struct pci_controller *hose; + resource_size_t size; + + spin_lock(&hose_spinlock); + list_for_each_entry(hose, &hose_list, list_node) { + size = pcibios_io_size(hose); + if (address >= hose->io_base_virt && + address < (hose->io_base_virt + size)) { + ret = 1; + break; + } + } + spin_unlock(&hose_spinlock); + return ret; +} + +unsigned long pci_address_to_pio(phys_addr_t address) +{ + struct pci_controller *hose; + resource_size_t size; + unsigned long ret = ~0; + + spin_lock(&hose_spinlock); + list_for_each_entry(hose, &hose_list, list_node) { + size = pcibios_io_size(hose); + if (address >= hose->io_base_phys && + address < (hose->io_base_phys + size)) { + unsigned long base = + (unsigned long)hose->io_base_virt - _IO_BASE; + ret = base + (address - hose->io_base_phys); + break; + } + } + spin_unlock(&hose_spinlock); + + return ret; +} +EXPORT_SYMBOL_GPL(pci_address_to_pio); + +/* + * Return the domain number for this bus. + */ +int pci_domain_nr(struct pci_bus *bus) +{ + struct pci_controller *hose = pci_bus_to_host(bus); + + return hose->global_number; +} +EXPORT_SYMBOL(pci_domain_nr); + +/* This routine is meant to be used early during boot, when the + * PCI bus numbers have not yet been assigned, and you need to + * issue PCI config cycles to an OF device. + * It could also be used to "fix" RTAS config cycles if you want + * to set pci_assign_all_buses to 1 and still use RTAS for PCI + * config cycles. + */ +struct pci_controller *pci_find_hose_for_OF_device(struct device_node *node) +{ + while (node) { + struct pci_controller *hose, *tmp; + list_for_each_entry_safe(hose, tmp, &hose_list, list_node) + if (hose->dn == node) + return hose; + node = node->parent; + } + return NULL; +} + +static ssize_t pci_show_devspec(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct pci_dev *pdev; + struct device_node *np; + + pdev = to_pci_dev(dev); + np = pci_device_to_OF_node(pdev); + if (np == NULL || np->full_name == NULL) + return 0; + return sprintf(buf, "%s", np->full_name); +} +static DEVICE_ATTR(devspec, S_IRUGO, pci_show_devspec, NULL); + +/* Add sysfs properties */ +int pcibios_add_platform_entries(struct pci_dev *pdev) +{ + return device_create_file(&pdev->dev, &dev_attr_devspec); +} + +char __devinit *pcibios_setup(char *str) +{ + return str; +} + +/* + * Reads the interrupt pin to determine if interrupt is use by card. + * If the interrupt is used, then gets the interrupt line from the + * openfirmware and sets it in the pci_dev and pci_config line. + */ +int pci_read_irq_line(struct pci_dev *pci_dev) +{ + struct of_irq oirq; + unsigned int virq; + + /* The current device-tree that iSeries generates from the HV + * PCI informations doesn't contain proper interrupt routing, + * and all the fallback would do is print out crap, so we + * don't attempt to resolve the interrupts here at all, some + * iSeries specific fixup does it. + * + * In the long run, we will hopefully fix the generated device-tree + * instead. + */ + pr_debug("PCI: Try to map irq for %s...\n", pci_name(pci_dev)); + +#ifdef DEBUG + memset(&oirq, 0xff, sizeof(oirq)); +#endif + /* Try to get a mapping from the device-tree */ + if (of_irq_map_pci(pci_dev, &oirq)) { + u8 line, pin; + + /* If that fails, lets fallback to what is in the config + * space and map that through the default controller. We + * also set the type to level low since that's what PCI + * interrupts are. If your platform does differently, then + * either provide a proper interrupt tree or don't use this + * function. + */ + if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_PIN, &pin)) + return -1; + if (pin == 0) + return -1; + if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_LINE, &line) || + line == 0xff || line == 0) { + return -1; + } + pr_debug(" No map ! Using line %d (pin %d) from PCI config\n", + line, pin); + + virq = irq_create_mapping(NULL, line); + if (virq != NO_IRQ) + set_irq_type(virq, IRQ_TYPE_LEVEL_LOW); + } else { + pr_debug(" Got one, spec %d cells (0x%08x 0x%08x...) on %s\n", + oirq.size, oirq.specifier[0], oirq.specifier[1], + oirq.controller ? oirq.controller->full_name : + "<default>"); + + virq = irq_create_of_mapping(oirq.controller, oirq.specifier, + oirq.size); + } + if (virq == NO_IRQ) { + pr_debug(" Failed to map !\n"); + return -1; + } + + pr_debug(" Mapped to linux irq %d\n", virq); + + pci_dev->irq = virq; + + return 0; +} +EXPORT_SYMBOL(pci_read_irq_line); + +/* + * Platform support for /proc/bus/pci/X/Y mmap()s, + * modelled on the sparc64 implementation by Dave Miller. + * -- paulus. + */ + +/* + * Adjust vm_pgoff of VMA such that it is the physical page offset + * corresponding to the 32-bit pci bus offset for DEV requested by the user. + * + * Basically, the user finds the base address for his device which he wishes + * to mmap. They read the 32-bit value from the config space base register, + * add whatever PAGE_SIZE multiple offset they wish, and feed this into the + * offset parameter of mmap on /proc/bus/pci/XXX for that device. + * + * Returns negative error code on failure, zero on success. + */ +static struct resource *__pci_mmap_make_offset(struct pci_dev *dev, + resource_size_t *offset, + enum pci_mmap_state mmap_state) +{ + struct pci_controller *hose = pci_bus_to_host(dev->bus); + unsigned long io_offset = 0; + int i, res_bit; + + if (hose == 0) + return NULL; /* should never happen */ + + /* If memory, add on the PCI bridge address offset */ + if (mmap_state == pci_mmap_mem) { +#if 0 /* See comment in pci_resource_to_user() for why this is disabled */ + *offset += hose->pci_mem_offset; +#endif + res_bit = IORESOURCE_MEM; + } else { + io_offset = (unsigned long)hose->io_base_virt - _IO_BASE; + *offset += io_offset; + res_bit = IORESOURCE_IO; + } + + /* + * Check that the offset requested corresponds to one of the + * resources of the device. + */ + for (i = 0; i <= PCI_ROM_RESOURCE; i++) { + struct resource *rp = &dev->resource[i]; + int flags = rp->flags; + + /* treat ROM as memory (should be already) */ + if (i == PCI_ROM_RESOURCE) + flags |= IORESOURCE_MEM; + + /* Active and same type? */ + if ((flags & res_bit) == 0) + continue; + + /* In the range of this resource? */ + if (*offset < (rp->start & PAGE_MASK) || *offset > rp->end) + continue; + + /* found it! construct the final physical address */ + if (mmap_state == pci_mmap_io) + *offset += hose->io_base_phys - io_offset; + return rp; + } + + return NULL; +} + +/* + * Set vm_page_prot of VMA, as appropriate for this architecture, for a pci + * device mapping. + */ +static pgprot_t __pci_mmap_set_pgprot(struct pci_dev *dev, struct resource *rp, + pgprot_t protection, + enum pci_mmap_state mmap_state, + int write_combine) +{ + pgprot_t prot = protection; + + /* Write combine is always 0 on non-memory space mappings. On + * memory space, if the user didn't pass 1, we check for a + * "prefetchable" resource. This is a bit hackish, but we use + * this to workaround the inability of /sysfs to provide a write + * combine bit + */ + if (mmap_state != pci_mmap_mem) + write_combine = 0; + else if (write_combine == 0) { + if (rp->flags & IORESOURCE_PREFETCH) + write_combine = 1; + } + + return pgprot_noncached(prot); +} + +/* + * This one is used by /dev/mem and fbdev who have no clue about the + * PCI device, it tries to find the PCI device first and calls the + * above routine + */ +pgprot_t pci_phys_mem_access_prot(struct file *file, + unsigned long pfn, + unsigned long size, + pgprot_t prot) +{ + struct pci_dev *pdev = NULL; + struct resource *found = NULL; + resource_size_t offset = ((resource_size_t)pfn) << PAGE_SHIFT; + int i; + + if (page_is_ram(pfn)) + return prot; + + prot = pgprot_noncached(prot); + for_each_pci_dev(pdev) { + for (i = 0; i <= PCI_ROM_RESOURCE; i++) { + struct resource *rp = &pdev->resource[i]; + int flags = rp->flags; + + /* Active and same type? */ + if ((flags & IORESOURCE_MEM) == 0) + continue; + /* In the range of this resource? */ + if (offset < (rp->start & PAGE_MASK) || + offset > rp->end) + continue; + found = rp; + break; + } + if (found) + break; + } + if (found) { + if (found->flags & IORESOURCE_PREFETCH) + prot = pgprot_noncached_wc(prot); + pci_dev_put(pdev); + } + + pr_debug("PCI: Non-PCI map for %llx, prot: %lx\n", + (unsigned long long)offset, pgprot_val(prot)); + + return prot; +} + +/* + * Perform the actual remap of the pages for a PCI device mapping, as + * appropriate for this architecture. The region in the process to map + * is described by vm_start and vm_end members of VMA, the base physical + * address is found in vm_pgoff. + * The pci device structure is provided so that architectures may make mapping + * decisions on a per-device or per-bus basis. + * + * Returns a negative error code on failure, zero on success. + */ +int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, + enum pci_mmap_state mmap_state, int write_combine) +{ + resource_size_t offset = + ((resource_size_t)vma->vm_pgoff) << PAGE_SHIFT; + struct resource *rp; + int ret; + + rp = __pci_mmap_make_offset(dev, &offset, mmap_state); + if (rp == NULL) + return -EINVAL; + + vma->vm_pgoff = offset >> PAGE_SHIFT; + vma->vm_page_prot = __pci_mmap_set_pgprot(dev, rp, + vma->vm_page_prot, + mmap_state, write_combine); + + ret = remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff, + vma->vm_end - vma->vm_start, vma->vm_page_prot); + + return ret; +} + +/* This provides legacy IO read access on a bus */ +int pci_legacy_read(struct pci_bus *bus, loff_t port, u32 *val, size_t size) +{ + unsigned long offset; + struct pci_controller *hose = pci_bus_to_host(bus); + struct resource *rp = &hose->io_resource; + void __iomem *addr; + + /* Check if port can be supported by that bus. We only check + * the ranges of the PHB though, not the bus itself as the rules + * for forwarding legacy cycles down bridges are not our problem + * here. So if the host bridge supports it, we do it. + */ + offset = (unsigned long)hose->io_base_virt - _IO_BASE; + offset += port; + + if (!(rp->flags & IORESOURCE_IO)) + return -ENXIO; + if (offset < rp->start || (offset + size) > rp->end) + return -ENXIO; + addr = hose->io_base_virt + port; + + switch (size) { + case 1: + *((u8 *)val) = in_8(addr); + return 1; + case 2: + if (port & 1) + return -EINVAL; + *((u16 *)val) = in_le16(addr); + return 2; + case 4: + if (port & 3) + return -EINVAL; + *((u32 *)val) = in_le32(addr); + return 4; + } + return -EINVAL; +} + +/* This provides legacy IO write access on a bus */ +int pci_legacy_write(struct pci_bus *bus, loff_t port, u32 val, size_t size) +{ + unsigned long offset; + struct pci_controller *hose = pci_bus_to_host(bus); + struct resource *rp = &hose->io_resource; + void __iomem *addr; + + /* Check if port can be supported by that bus. We only check + * the ranges of the PHB though, not the bus itself as the rules + * for forwarding legacy cycles down bridges are not our problem + * here. So if the host bridge supports it, we do it. + */ + offset = (unsigned long)hose->io_base_virt - _IO_BASE; + offset += port; + + if (!(rp->flags & IORESOURCE_IO)) + return -ENXIO; + if (offset < rp->start || (offset + size) > rp->end) + return -ENXIO; + addr = hose->io_base_virt + port; + + /* WARNING: The generic code is idiotic. It gets passed a pointer + * to what can be a 1, 2 or 4 byte quantity and always reads that + * as a u32, which means that we have to correct the location of + * the data read within those 32 bits for size 1 and 2 + */ + switch (size) { + case 1: + out_8(addr, val >> 24); + return 1; + case 2: + if (port & 1) + return -EINVAL; + out_le16(addr, val >> 16); + return 2; + case 4: + if (port & 3) + return -EINVAL; + out_le32(addr, val); + return 4; + } + return -EINVAL; +} + +/* This provides legacy IO or memory mmap access on a bus */ +int pci_mmap_legacy_page_range(struct pci_bus *bus, + struct vm_area_struct *vma, + enum pci_mmap_state mmap_state) +{ + struct pci_controller *hose = pci_bus_to_host(bus); + resource_size_t offset = + ((resource_size_t)vma->vm_pgoff) << PAGE_SHIFT; + resource_size_t size = vma->vm_end - vma->vm_start; + struct resource *rp; + + pr_debug("pci_mmap_legacy_page_range(%04x:%02x, %s @%llx..%llx)\n", + pci_domain_nr(bus), bus->number, + mmap_state == pci_mmap_mem ? "MEM" : "IO", + (unsigned long long)offset, + (unsigned long long)(offset + size - 1)); + + if (mmap_state == pci_mmap_mem) { + /* Hack alert ! + * + * Because X is lame and can fail starting if it gets an error + * trying to mmap legacy_mem (instead of just moving on without + * legacy memory access) we fake it here by giving it anonymous + * memory, effectively behaving just like /dev/zero + */ + if ((offset + size) > hose->isa_mem_size) { +#ifdef CONFIG_MMU + printk(KERN_DEBUG + "Process %s (pid:%d) mapped non-existing PCI" + "legacy memory for 0%04x:%02x\n", + current->comm, current->pid, pci_domain_nr(bus), + bus->number); +#endif + if (vma->vm_flags & VM_SHARED) + return shmem_zero_setup(vma); + return 0; + } + offset += hose->isa_mem_phys; + } else { + unsigned long io_offset = (unsigned long)hose->io_base_virt - \ + _IO_BASE; + unsigned long roffset = offset + io_offset; + rp = &hose->io_resource; + if (!(rp->flags & IORESOURCE_IO)) + return -ENXIO; + if (roffset < rp->start || (roffset + size) > rp->end) + return -ENXIO; + offset += hose->io_base_phys; + } + pr_debug(" -> mapping phys %llx\n", (unsigned long long)offset); + + vma->vm_pgoff = offset >> PAGE_SHIFT; + vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); + return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff, + vma->vm_end - vma->vm_start, + vma->vm_page_prot); +} + +void pci_resource_to_user(const struct pci_dev *dev, int bar, + const struct resource *rsrc, + resource_size_t *start, resource_size_t *end) +{ + struct pci_controller *hose = pci_bus_to_host(dev->bus); + resource_size_t offset = 0; + + if (hose == NULL) + return; + + if (rsrc->flags & IORESOURCE_IO) + offset = (unsigned long)hose->io_base_virt - _IO_BASE; + + /* We pass a fully fixed up address to userland for MMIO instead of + * a BAR value because X is lame and expects to be able to use that + * to pass to /dev/mem ! + * + * That means that we'll have potentially 64 bits values where some + * userland apps only expect 32 (like X itself since it thinks only + * Sparc has 64 bits MMIO) but if we don't do that, we break it on + * 32 bits CHRPs :-( + * + * Hopefully, the sysfs insterface is immune to that gunk. Once X + * has been fixed (and the fix spread enough), we can re-enable the + * 2 lines below and pass down a BAR value to userland. In that case + * we'll also have to re-enable the matching code in + * __pci_mmap_make_offset(). + * + * BenH. + */ +#if 0 + else if (rsrc->flags & IORESOURCE_MEM) + offset = hose->pci_mem_offset; +#endif + + *start = rsrc->start - offset; + *end = rsrc->end - offset; +} + +/** + * pci_process_bridge_OF_ranges - Parse PCI bridge resources from device tree + * @hose: newly allocated pci_controller to be setup + * @dev: device node of the host bridge + * @primary: set if primary bus (32 bits only, soon to be deprecated) + * + * This function will parse the "ranges" property of a PCI host bridge device + * node and setup the resource mapping of a pci controller based on its + * content. + * + * Life would be boring if it wasn't for a few issues that we have to deal + * with here: + * + * - We can only cope with one IO space range and up to 3 Memory space + * ranges. However, some machines (thanks Apple !) tend to split their + * space into lots of small contiguous ranges. So we have to coalesce. + * + * - We can only cope with all memory ranges having the same offset + * between CPU addresses and PCI addresses. Unfortunately, some bridges + * are setup for a large 1:1 mapping along with a small "window" which + * maps PCI address 0 to some arbitrary high address of the CPU space in + * order to give access to the ISA memory hole. + * The way out of here that I've chosen for now is to always set the + * offset based on the first resource found, then override it if we + * have a different offset and the previous was set by an ISA hole. + * + * - Some busses have IO space not starting at 0, which causes trouble with + * the way we do our IO resource renumbering. The code somewhat deals with + * it for 64 bits but I would expect problems on 32 bits. + * + * - Some 32 bits platforms such as 4xx can have physical space larger than + * 32 bits so we need to use 64 bits values for the parsing + */ +void __devinit pci_process_bridge_OF_ranges(struct pci_controller *hose, + struct device_node *dev, + int primary) +{ + const u32 *ranges; + int rlen; + int pna = of_n_addr_cells(dev); + int np = pna + 5; + int memno = 0, isa_hole = -1; + u32 pci_space; + unsigned long long pci_addr, cpu_addr, pci_next, cpu_next, size; + unsigned long long isa_mb = 0; + struct resource *res; + + printk(KERN_INFO "PCI host bridge %s %s ranges:\n", + dev->full_name, primary ? "(primary)" : ""); + + /* Get ranges property */ + ranges = of_get_property(dev, "ranges", &rlen); + if (ranges == NULL) + return; + + /* Parse it */ + pr_debug("Parsing ranges property...\n"); + while ((rlen -= np * 4) >= 0) { + /* Read next ranges element */ + pci_space = ranges[0]; + pci_addr = of_read_number(ranges + 1, 2); + cpu_addr = of_translate_address(dev, ranges + 3); + size = of_read_number(ranges + pna + 3, 2); + + pr_debug("pci_space: 0x%08x pci_addr:0x%016llx " + "cpu_addr:0x%016llx size:0x%016llx\n", + pci_space, pci_addr, cpu_addr, size); + + ranges += np; + + /* If we failed translation or got a zero-sized region + * (some FW try to feed us with non sensical zero sized regions + * such as power3 which look like some kind of attempt + * at exposing the VGA memory hole) + */ + if (cpu_addr == OF_BAD_ADDR || size == 0) + continue; + + /* Now consume following elements while they are contiguous */ + for (; rlen >= np * sizeof(u32); + ranges += np, rlen -= np * 4) { + if (ranges[0] != pci_space) + break; + pci_next = of_read_number(ranges + 1, 2); + cpu_next = of_translate_address(dev, ranges + 3); + if (pci_next != pci_addr + size || + cpu_next != cpu_addr + size) + break; + size += of_read_number(ranges + pna + 3, 2); + } + + /* Act based on address space type */ + res = NULL; + switch ((pci_space >> 24) & 0x3) { + case 1: /* PCI IO space */ + printk(KERN_INFO + " IO 0x%016llx..0x%016llx -> 0x%016llx\n", + cpu_addr, cpu_addr + size - 1, pci_addr); + + /* We support only one IO range */ + if (hose->pci_io_size) { + printk(KERN_INFO + " \\--> Skipped (too many) !\n"); + continue; + } + /* On 32 bits, limit I/O space to 16MB */ + if (size > 0x01000000) + size = 0x01000000; + + /* 32 bits needs to map IOs here */ + hose->io_base_virt = ioremap(cpu_addr, size); + + /* Expect trouble if pci_addr is not 0 */ + if (primary) + isa_io_base = + (unsigned long)hose->io_base_virt; + /* pci_io_size and io_base_phys always represent IO + * space starting at 0 so we factor in pci_addr + */ + hose->pci_io_size = pci_addr + size; + hose->io_base_phys = cpu_addr - pci_addr; + + /* Build resource */ + res = &hose->io_resource; + res->flags = IORESOURCE_IO; + res->start = pci_addr; + break; + case 2: /* PCI Memory space */ + case 3: /* PCI 64 bits Memory space */ + printk(KERN_INFO + " MEM 0x%016llx..0x%016llx -> 0x%016llx %s\n", + cpu_addr, cpu_addr + size - 1, pci_addr, + (pci_space & 0x40000000) ? "Prefetch" : ""); + + /* We support only 3 memory ranges */ + if (memno >= 3) { + printk(KERN_INFO + " \\--> Skipped (too many) !\n"); + continue; + } + /* Handles ISA memory hole space here */ + if (pci_addr == 0) { + isa_mb = cpu_addr; + isa_hole = memno; + if (primary || isa_mem_base == 0) + isa_mem_base = cpu_addr; + hose->isa_mem_phys = cpu_addr; + hose->isa_mem_size = size; + } + + /* We get the PCI/Mem offset from the first range or + * the, current one if the offset came from an ISA + * hole. If they don't match, bugger. + */ + if (memno == 0 || + (isa_hole >= 0 && pci_addr != 0 && + hose->pci_mem_offset == isa_mb)) + hose->pci_mem_offset = cpu_addr - pci_addr; + else if (pci_addr != 0 && + hose->pci_mem_offset != cpu_addr - pci_addr) { + printk(KERN_INFO + " \\--> Skipped (offset mismatch) !\n"); + continue; + } + + /* Build resource */ + res = &hose->mem_resources[memno++]; + res->flags = IORESOURCE_MEM; + if (pci_space & 0x40000000) + res->flags |= IORESOURCE_PREFETCH; + res->start = cpu_addr; + break; + } + if (res != NULL) { + res->name = dev->full_name; + res->end = res->start + size - 1; + res->parent = NULL; + res->sibling = NULL; + res->child = NULL; + } + } + + /* If there's an ISA hole and the pci_mem_offset is -not- matching + * the ISA hole offset, then we need to remove the ISA hole from + * the resource list for that brige + */ + if (isa_hole >= 0 && hose->pci_mem_offset != isa_mb) { + unsigned int next = isa_hole + 1; + printk(KERN_INFO " Removing ISA hole at 0x%016llx\n", isa_mb); + if (next < memno) + memmove(&hose->mem_resources[isa_hole], + &hose->mem_resources[next], + sizeof(struct resource) * (memno - next)); + hose->mem_resources[--memno].flags = 0; + } +} + +/* Decide whether to display the domain number in /proc */ +int pci_proc_domain(struct pci_bus *bus) +{ + struct pci_controller *hose = pci_bus_to_host(bus); + + if (!(pci_flags & PCI_ENABLE_PROC_DOMAINS)) + return 0; + if (pci_flags & PCI_COMPAT_DOMAIN_0) + return hose->global_number != 0; + return 1; +} + +void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, + struct resource *res) +{ + resource_size_t offset = 0, mask = (resource_size_t)-1; + struct pci_controller *hose = pci_bus_to_host(dev->bus); + + if (!hose) + return; + if (res->flags & IORESOURCE_IO) { + offset = (unsigned long)hose->io_base_virt - _IO_BASE; + mask = 0xffffffffu; + } else if (res->flags & IORESOURCE_MEM) + offset = hose->pci_mem_offset; + + region->start = (res->start - offset) & mask; + region->end = (res->end - offset) & mask; +} +EXPORT_SYMBOL(pcibios_resource_to_bus); + +void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, + struct pci_bus_region *region) +{ + resource_size_t offset = 0, mask = (resource_size_t)-1; + struct pci_controller *hose = pci_bus_to_host(dev->bus); + + if (!hose) + return; + if (res->flags & IORESOURCE_IO) { + offset = (unsigned long)hose->io_base_virt - _IO_BASE; + mask = 0xffffffffu; + } else if (res->flags & IORESOURCE_MEM) + offset = hose->pci_mem_offset; + res->start = (region->start + offset) & mask; + res->end = (region->end + offset) & mask; +} +EXPORT_SYMBOL(pcibios_bus_to_resource); + +/* Fixup a bus resource into a linux resource */ +static void __devinit fixup_resource(struct resource *res, struct pci_dev *dev) +{ + struct pci_controller *hose = pci_bus_to_host(dev->bus); + resource_size_t offset = 0, mask = (resource_size_t)-1; + + if (res->flags & IORESOURCE_IO) { + offset = (unsigned long)hose->io_base_virt - _IO_BASE; + mask = 0xffffffffu; + } else if (res->flags & IORESOURCE_MEM) + offset = hose->pci_mem_offset; + + res->start = (res->start + offset) & mask; + res->end = (res->end + offset) & mask; +} + +/* This header fixup will do the resource fixup for all devices as they are + * probed, but not for bridge ranges + */ +static void __devinit pcibios_fixup_resources(struct pci_dev *dev) +{ + struct pci_controller *hose = pci_bus_to_host(dev->bus); + int i; + + if (!hose) { + printk(KERN_ERR "No host bridge for PCI dev %s !\n", + pci_name(dev)); + return; + } + for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { + struct resource *res = dev->resource + i; + if (!res->flags) + continue; + /* On platforms that have PCI_PROBE_ONLY set, we don't + * consider 0 as an unassigned BAR value. It's technically + * a valid value, but linux doesn't like it... so when we can + * re-assign things, we do so, but if we can't, we keep it + * around and hope for the best... + */ + if (res->start == 0 && !(pci_flags & PCI_PROBE_ONLY)) { + pr_debug("PCI:%s Resource %d %016llx-%016llx [%x]" \ + "is unassigned\n", + pci_name(dev), i, + (unsigned long long)res->start, + (unsigned long long)res->end, + (unsigned int)res->flags); + res->end -= res->start; + res->start = 0; + res->flags |= IORESOURCE_UNSET; + continue; + } + + pr_debug("PCI:%s Resource %d %016llx-%016llx [%x] fixup...\n", + pci_name(dev), i, + (unsigned long long)res->start,\ + (unsigned long long)res->end, + (unsigned int)res->flags); + + fixup_resource(res, dev); + + pr_debug("PCI:%s %016llx-%016llx\n", + pci_name(dev), + (unsigned long long)res->start, + (unsigned long long)res->end); + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pcibios_fixup_resources); + +/* This function tries to figure out if a bridge resource has been initialized + * by the firmware or not. It doesn't have to be absolutely bullet proof, but + * things go more smoothly when it gets it right. It should covers cases such + * as Apple "closed" bridge resources and bare-metal pSeries unassigned bridges + */ +static int __devinit pcibios_uninitialized_bridge_resource(struct pci_bus *bus, + struct resource *res) +{ + struct pci_controller *hose = pci_bus_to_host(bus); + struct pci_dev *dev = bus->self; + resource_size_t offset; + u16 command; + int i; + + /* We don't do anything if PCI_PROBE_ONLY is set */ + if (pci_flags & PCI_PROBE_ONLY) + return 0; + + /* Job is a bit different between memory and IO */ + if (res->flags & IORESOURCE_MEM) { + /* If the BAR is non-0 (res != pci_mem_offset) then it's + * probably been initialized by somebody + */ + if (res->start != hose->pci_mem_offset) + return 0; + + /* The BAR is 0, let's check if memory decoding is enabled on + * the bridge. If not, we consider it unassigned + */ + pci_read_config_word(dev, PCI_COMMAND, &command); + if ((command & PCI_COMMAND_MEMORY) == 0) + return 1; + + /* Memory decoding is enabled and the BAR is 0. If any of + * the bridge resources covers that starting address (0 then + * it's good enough for us for memory + */ + for (i = 0; i < 3; i++) { + if ((hose->mem_resources[i].flags & IORESOURCE_MEM) && + hose->mem_resources[i].start == hose->pci_mem_offset) + return 0; + } + + /* Well, it starts at 0 and we know it will collide so we may as + * well consider it as unassigned. That covers the Apple case. + */ + return 1; + } else { + /* If the BAR is non-0, then we consider it assigned */ + offset = (unsigned long)hose->io_base_virt - _IO_BASE; + if (((res->start - offset) & 0xfffffffful) != 0) + return 0; + + /* Here, we are a bit different than memory as typically IO + * space starting at low addresses -is- valid. What we do + * instead if that we consider as unassigned anything that + * doesn't have IO enabled in the PCI command register, + * and that's it. + */ + pci_read_config_word(dev, PCI_COMMAND, &command); + if (command & PCI_COMMAND_IO) + return 0; + + /* It's starting at 0 and IO is disabled in the bridge, consider + * it unassigned + */ + return 1; + } +} + +/* Fixup resources of a PCI<->PCI bridge */ +static void __devinit pcibios_fixup_bridge(struct pci_bus *bus) +{ + struct resource *res; + int i; + + struct pci_dev *dev = bus->self; + + pci_bus_for_each_resource(bus, res, i) { + res = bus->resource[i]; + if (!res) + continue; + if (!res->flags) + continue; + if (i >= 3 && bus->self->transparent) + continue; + + pr_debug("PCI:%s Bus rsrc %d %016llx-%016llx [%x] fixup...\n", + pci_name(dev), i, + (unsigned long long)res->start,\ + (unsigned long long)res->end, + (unsigned int)res->flags); + + /* Perform fixup */ + fixup_resource(res, dev); + + /* Try to detect uninitialized P2P bridge resources, + * and clear them out so they get re-assigned later + */ + if (pcibios_uninitialized_bridge_resource(bus, res)) { + res->flags = 0; + pr_debug("PCI:%s (unassigned)\n", + pci_name(dev)); + } else { + pr_debug("PCI:%s %016llx-%016llx\n", + pci_name(dev), + (unsigned long long)res->start, + (unsigned long long)res->end); + } + } +} + +void __devinit pcibios_setup_bus_self(struct pci_bus *bus) +{ + /* Fix up the bus resources for P2P bridges */ + if (bus->self != NULL) + pcibios_fixup_bridge(bus); +} + +void __devinit pcibios_setup_bus_devices(struct pci_bus *bus) +{ + struct pci_dev *dev; + + pr_debug("PCI: Fixup bus devices %d (%s)\n", + bus->number, bus->self ? pci_name(bus->self) : "PHB"); + + list_for_each_entry(dev, &bus->devices, bus_list) { + struct dev_archdata *sd = &dev->dev.archdata; + + /* Setup OF node pointer in archdata */ + sd->of_node = pci_device_to_OF_node(dev); + + /* Fixup NUMA node as it may not be setup yet by the generic + * code and is needed by the DMA init + */ + set_dev_node(&dev->dev, pcibus_to_node(dev->bus)); + + /* Hook up default DMA ops */ + sd->dma_ops = pci_dma_ops; + sd->dma_data = (void *)PCI_DRAM_OFFSET; + + /* Read default IRQs and fixup if necessary */ + pci_read_irq_line(dev); + } +} + +void __devinit pcibios_fixup_bus(struct pci_bus *bus) +{ + /* When called from the generic PCI probe, read PCI<->PCI bridge + * bases. This is -not- called when generating the PCI tree from + * the OF device-tree. + */ + if (bus->self != NULL) + pci_read_bridge_bases(bus); + + /* Now fixup the bus bus */ + pcibios_setup_bus_self(bus); + + /* Now fixup devices on that bus */ + pcibios_setup_bus_devices(bus); +} +EXPORT_SYMBOL(pcibios_fixup_bus); + +static int skip_isa_ioresource_align(struct pci_dev *dev) +{ + if ((pci_flags & PCI_CAN_SKIP_ISA_ALIGN) && + !(dev->bus->bridge_ctl & PCI_BRIDGE_CTL_ISA)) + return 1; + return 0; +} + +/* + * We need to avoid collisions with `mirrored' VGA ports + * and other strange ISA hardware, so we always want the + * addresses to be allocated in the 0x000-0x0ff region + * modulo 0x400. + * + * Why? Because some silly external IO cards only decode + * the low 10 bits of the IO address. The 0x00-0xff region + * is reserved for motherboard devices that decode all 16 + * bits, so it's ok to allocate at, say, 0x2800-0x28ff, + * but we want to try to avoid allocating at 0x2900-0x2bff + * which might have be mirrored at 0x0100-0x03ff.. + */ +resource_size_t pcibios_align_resource(void *data, const struct resource *res, + resource_size_t size, resource_size_t align) +{ + struct pci_dev *dev = data; + resource_size_t start = res->start; + + if (res->flags & IORESOURCE_IO) { + if (skip_isa_ioresource_align(dev)) + return start; + if (start & 0x300) + start = (start + 0x3ff) & ~0x3ff; + } + + return start; +} +EXPORT_SYMBOL(pcibios_align_resource); + +/* + * Reparent resource children of pr that conflict with res + * under res, and make res replace those children. + */ +static int __init reparent_resources(struct resource *parent, + struct resource *res) +{ + struct resource *p, **pp; + struct resource **firstpp = NULL; + + for (pp = &parent->child; (p = *pp) != NULL; pp = &p->sibling) { + if (p->end < res->start) + continue; + if (res->end < p->start) + break; + if (p->start < res->start || p->end > res->end) + return -1; /* not completely contained */ + if (firstpp == NULL) + firstpp = pp; + } + if (firstpp == NULL) + return -1; /* didn't find any conflicting entries? */ + res->parent = parent; + res->child = *firstpp; + res->sibling = *pp; + *firstpp = res; + *pp = NULL; + for (p = res->child; p != NULL; p = p->sibling) { + p->parent = res; + pr_debug("PCI: Reparented %s [%llx..%llx] under %s\n", + p->name, + (unsigned long long)p->start, + (unsigned long long)p->end, res->name); + } + return 0; +} + +/* + * Handle resources of PCI devices. If the world were perfect, we could + * just allocate all the resource regions and do nothing more. It isn't. + * On the other hand, we cannot just re-allocate all devices, as it would + * require us to know lots of host bridge internals. So we attempt to + * keep as much of the original configuration as possible, but tweak it + * when it's found to be wrong. + * + * Known BIOS problems we have to work around: + * - I/O or memory regions not configured + * - regions configured, but not enabled in the command register + * - bogus I/O addresses above 64K used + * - expansion ROMs left enabled (this may sound harmless, but given + * the fact the PCI specs explicitly allow address decoders to be + * shared between expansion ROMs and other resource regions, it's + * at least dangerous) + * + * Our solution: + * (1) Allocate resources for all buses behind PCI-to-PCI bridges. + * This gives us fixed barriers on where we can allocate. + * (2) Allocate resources for all enabled devices. If there is + * a collision, just mark the resource as unallocated. Also + * disable expansion ROMs during this step. + * (3) Try to allocate resources for disabled devices. If the + * resources were assigned correctly, everything goes well, + * if they weren't, they won't disturb allocation of other + * resources. + * (4) Assign new addresses to resources which were either + * not configured at all or misconfigured. If explicitly + * requested by the user, configure expansion ROM address + * as well. + */ + +void pcibios_allocate_bus_resources(struct pci_bus *bus) +{ + struct pci_bus *b; + int i; + struct resource *res, *pr; + + pr_debug("PCI: Allocating bus resources for %04x:%02x...\n", + pci_domain_nr(bus), bus->number); + + pci_bus_for_each_resource(bus, res, i) { + res = bus->resource[i]; + if (!res || !res->flags + || res->start > res->end || res->parent) + continue; + if (bus->parent == NULL) + pr = (res->flags & IORESOURCE_IO) ? + &ioport_resource : &iomem_resource; + else { + /* Don't bother with non-root busses when + * re-assigning all resources. We clear the + * resource flags as if they were colliding + * and as such ensure proper re-allocation + * later. + */ + if (pci_flags & PCI_REASSIGN_ALL_RSRC) + goto clear_resource; + pr = pci_find_parent_resource(bus->self, res); + if (pr == res) { + /* this happens when the generic PCI + * code (wrongly) decides that this + * bridge is transparent -- paulus + */ + continue; + } + } + + pr_debug("PCI: %s (bus %d) bridge rsrc %d: %016llx-%016llx " + "[0x%x], parent %p (%s)\n", + bus->self ? pci_name(bus->self) : "PHB", + bus->number, i, + (unsigned long long)res->start, + (unsigned long long)res->end, + (unsigned int)res->flags, + pr, (pr && pr->name) ? pr->name : "nil"); + + if (pr && !(pr->flags & IORESOURCE_UNSET)) { + if (request_resource(pr, res) == 0) + continue; + /* + * Must be a conflict with an existing entry. + * Move that entry (or entries) under the + * bridge resource and try again. + */ + if (reparent_resources(pr, res) == 0) + continue; + } + printk(KERN_WARNING "PCI: Cannot allocate resource region " + "%d of PCI bridge %d, will remap\n", i, bus->number); +clear_resource: + res->flags = 0; + } + + list_for_each_entry(b, &bus->children, node) + pcibios_allocate_bus_resources(b); +} + +static inline void __devinit alloc_resource(struct pci_dev *dev, int idx) +{ + struct resource *pr, *r = &dev->resource[idx]; + + pr_debug("PCI: Allocating %s: Resource %d: %016llx..%016llx [%x]\n", + pci_name(dev), idx, + (unsigned long long)r->start, + (unsigned long long)r->end, + (unsigned int)r->flags); + + pr = pci_find_parent_resource(dev, r); + if (!pr || (pr->flags & IORESOURCE_UNSET) || + request_resource(pr, r) < 0) { + printk(KERN_WARNING "PCI: Cannot allocate resource region %d" + " of device %s, will remap\n", idx, pci_name(dev)); + if (pr) + pr_debug("PCI: parent is %p: %016llx-%016llx [%x]\n", + pr, + (unsigned long long)pr->start, + (unsigned long long)pr->end, + (unsigned int)pr->flags); + /* We'll assign a new address later */ + r->flags |= IORESOURCE_UNSET; + r->end -= r->start; + r->start = 0; + } +} + +static void __init pcibios_allocate_resources(int pass) +{ + struct pci_dev *dev = NULL; + int idx, disabled; + u16 command; + struct resource *r; + + for_each_pci_dev(dev) { + pci_read_config_word(dev, PCI_COMMAND, &command); + for (idx = 0; idx <= PCI_ROM_RESOURCE; idx++) { + r = &dev->resource[idx]; + if (r->parent) /* Already allocated */ + continue; + if (!r->flags || (r->flags & IORESOURCE_UNSET)) + continue; /* Not assigned at all */ + /* We only allocate ROMs on pass 1 just in case they + * have been screwed up by firmware + */ + if (idx == PCI_ROM_RESOURCE) + disabled = 1; + if (r->flags & IORESOURCE_IO) + disabled = !(command & PCI_COMMAND_IO); + else + disabled = !(command & PCI_COMMAND_MEMORY); + if (pass == disabled) + alloc_resource(dev, idx); + } + if (pass) + continue; + r = &dev->resource[PCI_ROM_RESOURCE]; + if (r->flags) { + /* Turn the ROM off, leave the resource region, + * but keep it unregistered. + */ + u32 reg; + pci_read_config_dword(dev, dev->rom_base_reg, ®); + if (reg & PCI_ROM_ADDRESS_ENABLE) { + pr_debug("PCI: Switching off ROM of %s\n", + pci_name(dev)); + r->flags &= ~IORESOURCE_ROM_ENABLE; + pci_write_config_dword(dev, dev->rom_base_reg, + reg & ~PCI_ROM_ADDRESS_ENABLE); + } + } + } +} + +static void __init pcibios_reserve_legacy_regions(struct pci_bus *bus) +{ + struct pci_controller *hose = pci_bus_to_host(bus); + resource_size_t offset; + struct resource *res, *pres; + int i; + + pr_debug("Reserving legacy ranges for domain %04x\n", + pci_domain_nr(bus)); + + /* Check for IO */ + if (!(hose->io_resource.flags & IORESOURCE_IO)) + goto no_io; + offset = (unsigned long)hose->io_base_virt - _IO_BASE; + res = kzalloc(sizeof(struct resource), GFP_KERNEL); + BUG_ON(res == NULL); + res->name = "Legacy IO"; + res->flags = IORESOURCE_IO; + res->start = offset; + res->end = (offset + 0xfff) & 0xfffffffful; + pr_debug("Candidate legacy IO: %pR\n", res); + if (request_resource(&hose->io_resource, res)) { + printk(KERN_DEBUG + "PCI %04x:%02x Cannot reserve Legacy IO %pR\n", + pci_domain_nr(bus), bus->number, res); + kfree(res); + } + + no_io: + /* Check for memory */ + offset = hose->pci_mem_offset; + pr_debug("hose mem offset: %016llx\n", (unsigned long long)offset); + for (i = 0; i < 3; i++) { + pres = &hose->mem_resources[i]; + if (!(pres->flags & IORESOURCE_MEM)) + continue; + pr_debug("hose mem res: %pR\n", pres); + if ((pres->start - offset) <= 0xa0000 && + (pres->end - offset) >= 0xbffff) + break; + } + if (i >= 3) + return; + res = kzalloc(sizeof(struct resource), GFP_KERNEL); + BUG_ON(res == NULL); + res->name = "Legacy VGA memory"; + res->flags = IORESOURCE_MEM; + res->start = 0xa0000 + offset; + res->end = 0xbffff + offset; + pr_debug("Candidate VGA memory: %pR\n", res); + if (request_resource(pres, res)) { + printk(KERN_DEBUG + "PCI %04x:%02x Cannot reserve VGA memory %pR\n", + pci_domain_nr(bus), bus->number, res); + kfree(res); + } +} + +void __init pcibios_resource_survey(void) +{ + struct pci_bus *b; + + /* Allocate and assign resources. If we re-assign everything, then + * we skip the allocate phase + */ + list_for_each_entry(b, &pci_root_buses, node) + pcibios_allocate_bus_resources(b); + + if (!(pci_flags & PCI_REASSIGN_ALL_RSRC)) { + pcibios_allocate_resources(0); + pcibios_allocate_resources(1); + } + + /* Before we start assigning unassigned resource, we try to reserve + * the low IO area and the VGA memory area if they intersect the + * bus available resources to avoid allocating things on top of them + */ + if (!(pci_flags & PCI_PROBE_ONLY)) { + list_for_each_entry(b, &pci_root_buses, node) + pcibios_reserve_legacy_regions(b); + } + + /* Now, if the platform didn't decide to blindly trust the firmware, + * we proceed to assigning things that were left unassigned + */ + if (!(pci_flags & PCI_PROBE_ONLY)) { + pr_debug("PCI: Assigning unassigned resources...\n"); + pci_assign_unassigned_resources(); + } +} + +#ifdef CONFIG_HOTPLUG + +/* This is used by the PCI hotplug driver to allocate resource + * of newly plugged busses. We can try to consolidate with the + * rest of the code later, for now, keep it as-is as our main + * resource allocation function doesn't deal with sub-trees yet. + */ +void __devinit pcibios_claim_one_bus(struct pci_bus *bus) +{ + struct pci_dev *dev; + struct pci_bus *child_bus; + + list_for_each_entry(dev, &bus->devices, bus_list) { + int i; + + for (i = 0; i < PCI_NUM_RESOURCES; i++) { + struct resource *r = &dev->resource[i]; + + if (r->parent || !r->start || !r->flags) + continue; + + pr_debug("PCI: Claiming %s: " + "Resource %d: %016llx..%016llx [%x]\n", + pci_name(dev), i, + (unsigned long long)r->start, + (unsigned long long)r->end, + (unsigned int)r->flags); + + pci_claim_resource(dev, i); + } + } + + list_for_each_entry(child_bus, &bus->children, node) + pcibios_claim_one_bus(child_bus); +} +EXPORT_SYMBOL_GPL(pcibios_claim_one_bus); + + +/* pcibios_finish_adding_to_bus + * + * This is to be called by the hotplug code after devices have been + * added to a bus, this include calling it for a PHB that is just + * being added + */ +void pcibios_finish_adding_to_bus(struct pci_bus *bus) +{ + pr_debug("PCI: Finishing adding to hotplug bus %04x:%02x\n", + pci_domain_nr(bus), bus->number); + + /* Allocate bus and devices resources */ + pcibios_allocate_bus_resources(bus); + pcibios_claim_one_bus(bus); + + /* Add new devices to global lists. Register in proc, sysfs. */ + pci_bus_add_devices(bus); + + /* Fixup EEH */ + /* eeh_add_device_tree_late(bus); */ +} +EXPORT_SYMBOL_GPL(pcibios_finish_adding_to_bus); + +#endif /* CONFIG_HOTPLUG */ + +int pcibios_enable_device(struct pci_dev *dev, int mask) +{ + return pci_enable_resources(dev, mask); +} + +void __devinit pcibios_setup_phb_resources(struct pci_controller *hose) +{ + struct pci_bus *bus = hose->bus; + struct resource *res; + int i; + + /* Hookup PHB IO resource */ + bus->resource[0] = res = &hose->io_resource; + + if (!res->flags) { + printk(KERN_WARNING "PCI: I/O resource not set for host" + " bridge %s (domain %d)\n", + hose->dn->full_name, hose->global_number); + /* Workaround for lack of IO resource only on 32-bit */ + res->start = (unsigned long)hose->io_base_virt - isa_io_base; + res->end = res->start + IO_SPACE_LIMIT; + res->flags = IORESOURCE_IO; + } + + pr_debug("PCI: PHB IO resource = %016llx-%016llx [%lx]\n", + (unsigned long long)res->start, + (unsigned long long)res->end, + (unsigned long)res->flags); + + /* Hookup PHB Memory resources */ + for (i = 0; i < 3; ++i) { + res = &hose->mem_resources[i]; + if (!res->flags) { + if (i > 0) + continue; + printk(KERN_ERR "PCI: Memory resource 0 not set for " + "host bridge %s (domain %d)\n", + hose->dn->full_name, hose->global_number); + + /* Workaround for lack of MEM resource only on 32-bit */ + res->start = hose->pci_mem_offset; + res->end = (resource_size_t)-1LL; + res->flags = IORESOURCE_MEM; + + } + bus->resource[i+1] = res; + + pr_debug("PCI: PHB MEM resource %d = %016llx-%016llx [%lx]\n", + i, (unsigned long long)res->start, + (unsigned long long)res->end, + (unsigned long)res->flags); + } + + pr_debug("PCI: PHB MEM offset = %016llx\n", + (unsigned long long)hose->pci_mem_offset); + pr_debug("PCI: PHB IO offset = %08lx\n", + (unsigned long)hose->io_base_virt - _IO_BASE); +} + +/* + * Null PCI config access functions, for the case when we can't + * find a hose. + */ +#define NULL_PCI_OP(rw, size, type) \ +static int \ +null_##rw##_config_##size(struct pci_dev *dev, int offset, type val) \ +{ \ + return PCIBIOS_DEVICE_NOT_FOUND; \ +} + +static int +null_read_config(struct pci_bus *bus, unsigned int devfn, int offset, + int len, u32 *val) +{ + return PCIBIOS_DEVICE_NOT_FOUND; +} + +static int +null_write_config(struct pci_bus *bus, unsigned int devfn, int offset, + int len, u32 val) +{ + return PCIBIOS_DEVICE_NOT_FOUND; +} + +static struct pci_ops null_pci_ops = { + .read = null_read_config, + .write = null_write_config, +}; + +/* + * These functions are used early on before PCI scanning is done + * and all of the pci_dev and pci_bus structures have been created. + */ +static struct pci_bus * +fake_pci_bus(struct pci_controller *hose, int busnr) +{ + static struct pci_bus bus; + + if (!hose) + printk(KERN_ERR "Can't find hose for PCI bus %d!\n", busnr); + + bus.number = busnr; + bus.sysdata = hose; + bus.ops = hose ? hose->ops : &null_pci_ops; + return &bus; +} + +#define EARLY_PCI_OP(rw, size, type) \ +int early_##rw##_config_##size(struct pci_controller *hose, int bus, \ + int devfn, int offset, type value) \ +{ \ + return pci_bus_##rw##_config_##size(fake_pci_bus(hose, bus), \ + devfn, offset, value); \ +} + +EARLY_PCI_OP(read, byte, u8 *) +EARLY_PCI_OP(read, word, u16 *) +EARLY_PCI_OP(read, dword, u32 *) +EARLY_PCI_OP(write, byte, u8) +EARLY_PCI_OP(write, word, u16) +EARLY_PCI_OP(write, dword, u32) + +int early_find_capability(struct pci_controller *hose, int bus, int devfn, + int cap) +{ + return pci_bus_find_capability(fake_pci_bus(hose, bus), devfn, cap); +} diff --git a/arch/microblaze/pci/pci_32.c b/arch/microblaze/pci/pci_32.c new file mode 100644 index 00000000000..3c3d808d7ce --- /dev/null +++ b/arch/microblaze/pci/pci_32.c @@ -0,0 +1,431 @@ +/* + * Common pmac/prep/chrp pci routines. -- Cort + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/string.h> +#include <linux/init.h> +#include <linux/capability.h> +#include <linux/sched.h> +#include <linux/errno.h> +#include <linux/bootmem.h> +#include <linux/irq.h> +#include <linux/list.h> +#include <linux/of.h> +#include <linux/slab.h> + +#include <asm/processor.h> +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/sections.h> +#include <asm/pci-bridge.h> +#include <asm/byteorder.h> +#include <asm/uaccess.h> + +#undef DEBUG + +unsigned long isa_io_base; +unsigned long pci_dram_offset; +int pcibios_assign_bus_offset = 1; + +static u8 *pci_to_OF_bus_map; + +/* By default, we don't re-assign bus numbers. We do this only on + * some pmacs + */ +static int pci_assign_all_buses; + +static int pci_bus_count; + +/* + * Functions below are used on OpenFirmware machines. + */ +static void +make_one_node_map(struct device_node *node, u8 pci_bus) +{ + const int *bus_range; + int len; + + if (pci_bus >= pci_bus_count) + return; + bus_range = of_get_property(node, "bus-range", &len); + if (bus_range == NULL || len < 2 * sizeof(int)) { + printk(KERN_WARNING "Can't get bus-range for %s, " + "assuming it starts at 0\n", node->full_name); + pci_to_OF_bus_map[pci_bus] = 0; + } else + pci_to_OF_bus_map[pci_bus] = bus_range[0]; + + for_each_child_of_node(node, node) { + struct pci_dev *dev; + const unsigned int *class_code, *reg; + + class_code = of_get_property(node, "class-code", NULL); + if (!class_code || + ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI && + (*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS)) + continue; + reg = of_get_property(node, "reg", NULL); + if (!reg) + continue; + dev = pci_get_bus_and_slot(pci_bus, ((reg[0] >> 8) & 0xff)); + if (!dev || !dev->subordinate) { + pci_dev_put(dev); + continue; + } + make_one_node_map(node, dev->subordinate->number); + pci_dev_put(dev); + } +} + +void +pcibios_make_OF_bus_map(void) +{ + int i; + struct pci_controller *hose, *tmp; + struct property *map_prop; + struct device_node *dn; + + pci_to_OF_bus_map = kmalloc(pci_bus_count, GFP_KERNEL); + if (!pci_to_OF_bus_map) { + printk(KERN_ERR "Can't allocate OF bus map !\n"); + return; + } + + /* We fill the bus map with invalid values, that helps + * debugging. + */ + for (i = 0; i < pci_bus_count; i++) + pci_to_OF_bus_map[i] = 0xff; + + /* For each hose, we begin searching bridges */ + list_for_each_entry_safe(hose, tmp, &hose_list, list_node) { + struct device_node *node = hose->dn; + + if (!node) + continue; + make_one_node_map(node, hose->first_busno); + } + dn = of_find_node_by_path("/"); + map_prop = of_find_property(dn, "pci-OF-bus-map", NULL); + if (map_prop) { + BUG_ON(pci_bus_count > map_prop->length); + memcpy(map_prop->value, pci_to_OF_bus_map, pci_bus_count); + } + of_node_put(dn); +#ifdef DEBUG + printk(KERN_INFO "PCI->OF bus map:\n"); + for (i = 0; i < pci_bus_count; i++) { + if (pci_to_OF_bus_map[i] == 0xff) + continue; + printk(KERN_INFO "%d -> %d\n", i, pci_to_OF_bus_map[i]); + } +#endif +} + +typedef int (*pci_OF_scan_iterator)(struct device_node *node, void *data); + +static struct device_node *scan_OF_pci_childs(struct device_node *parent, + pci_OF_scan_iterator filter, void *data) +{ + struct device_node *node; + struct device_node *sub_node; + + for_each_child_of_node(parent, node) { + const unsigned int *class_code; + + if (filter(node, data)) { + of_node_put(node); + return node; + } + + /* For PCI<->PCI bridges or CardBus bridges, we go down + * Note: some OFs create a parent node "multifunc-device" as + * a fake root for all functions of a multi-function device, + * we go down them as well. + */ + class_code = of_get_property(node, "class-code", NULL); + if ((!class_code || + ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI && + (*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS)) && + strcmp(node->name, "multifunc-device")) + continue; + sub_node = scan_OF_pci_childs(node, filter, data); + if (sub_node) { + of_node_put(node); + return sub_node; + } + } + return NULL; +} + +static struct device_node *scan_OF_for_pci_dev(struct device_node *parent, + unsigned int devfn) +{ + struct device_node *np, *cnp; + const u32 *reg; + unsigned int psize; + + for_each_child_of_node(parent, np) { + reg = of_get_property(np, "reg", &psize); + if (reg && psize >= 4 && ((reg[0] >> 8) & 0xff) == devfn) + return np; + + /* Note: some OFs create a parent node "multifunc-device" as + * a fake root for all functions of a multi-function device, + * we go down them as well. */ + if (!strcmp(np->name, "multifunc-device")) { + cnp = scan_OF_for_pci_dev(np, devfn); + if (cnp) + return cnp; + } + } + return NULL; +} + + +static struct device_node *scan_OF_for_pci_bus(struct pci_bus *bus) +{ + struct device_node *parent, *np; + + /* Are we a root bus ? */ + if (bus->self == NULL || bus->parent == NULL) { + struct pci_controller *hose = pci_bus_to_host(bus); + if (hose == NULL) + return NULL; + return of_node_get(hose->dn); + } + + /* not a root bus, we need to get our parent */ + parent = scan_OF_for_pci_bus(bus->parent); + if (parent == NULL) + return NULL; + + /* now iterate for children for a match */ + np = scan_OF_for_pci_dev(parent, bus->self->devfn); + of_node_put(parent); + + return np; +} + +/* + * Scans the OF tree for a device node matching a PCI device + */ +struct device_node * +pci_busdev_to_OF_node(struct pci_bus *bus, int devfn) +{ + struct device_node *parent, *np; + + pr_debug("pci_busdev_to_OF_node(%d,0x%x)\n", bus->number, devfn); + parent = scan_OF_for_pci_bus(bus); + if (parent == NULL) + return NULL; + pr_debug(" parent is %s\n", parent ? parent->full_name : "<NULL>"); + np = scan_OF_for_pci_dev(parent, devfn); + of_node_put(parent); + pr_debug(" result is %s\n", np ? np->full_name : "<NULL>"); + + /* XXX most callers don't release the returned node + * mostly because ppc64 doesn't increase the refcount, + * we need to fix that. + */ + return np; +} +EXPORT_SYMBOL(pci_busdev_to_OF_node); + +struct device_node* +pci_device_to_OF_node(struct pci_dev *dev) +{ + return pci_busdev_to_OF_node(dev->bus, dev->devfn); +} +EXPORT_SYMBOL(pci_device_to_OF_node); + +static int +find_OF_pci_device_filter(struct device_node *node, void *data) +{ + return ((void *)node == data); +} + +/* + * Returns the PCI device matching a given OF node + */ +int +pci_device_from_OF_node(struct device_node *node, u8 *bus, u8 *devfn) +{ + const unsigned int *reg; + struct pci_controller *hose; + struct pci_dev *dev = NULL; + + /* Make sure it's really a PCI device */ + hose = pci_find_hose_for_OF_device(node); + if (!hose || !hose->dn) + return -ENODEV; + if (!scan_OF_pci_childs(hose->dn, + find_OF_pci_device_filter, (void *)node)) + return -ENODEV; + reg = of_get_property(node, "reg", NULL); + if (!reg) + return -ENODEV; + *bus = (reg[0] >> 16) & 0xff; + *devfn = ((reg[0] >> 8) & 0xff); + + /* Ok, here we need some tweak. If we have already renumbered + * all busses, we can't rely on the OF bus number any more. + * the pci_to_OF_bus_map is not enough as several PCI busses + * may match the same OF bus number. + */ + if (!pci_to_OF_bus_map) + return 0; + + for_each_pci_dev(dev) + if (pci_to_OF_bus_map[dev->bus->number] == *bus && + dev->devfn == *devfn) { + *bus = dev->bus->number; + pci_dev_put(dev); + return 0; + } + + return -ENODEV; +} +EXPORT_SYMBOL(pci_device_from_OF_node); + +/* We create the "pci-OF-bus-map" property now so it appears in the + * /proc device tree + */ +void __init +pci_create_OF_bus_map(void) +{ + struct property *of_prop; + struct device_node *dn; + + of_prop = (struct property *) alloc_bootmem(sizeof(struct property) + \ + 256); + if (!of_prop) + return; + dn = of_find_node_by_path("/"); + if (dn) { + memset(of_prop, -1, sizeof(struct property) + 256); + of_prop->name = "pci-OF-bus-map"; + of_prop->length = 256; + of_prop->value = &of_prop[1]; + prom_add_property(dn, of_prop); + of_node_put(dn); + } +} + +static void __devinit pcibios_scan_phb(struct pci_controller *hose) +{ + struct pci_bus *bus; + struct device_node *node = hose->dn; + unsigned long io_offset; + struct resource *res = &hose->io_resource; + + pr_debug("PCI: Scanning PHB %s\n", + node ? node->full_name : "<NO NAME>"); + + /* Create an empty bus for the toplevel */ + bus = pci_create_bus(hose->parent, hose->first_busno, hose->ops, hose); + if (bus == NULL) { + printk(KERN_ERR "Failed to create bus for PCI domain %04x\n", + hose->global_number); + return; + } + bus->secondary = hose->first_busno; + hose->bus = bus; + + /* Fixup IO space offset */ + io_offset = (unsigned long)hose->io_base_virt - isa_io_base; + res->start = (res->start + io_offset) & 0xffffffffu; + res->end = (res->end + io_offset) & 0xffffffffu; + + /* Wire up PHB bus resources */ + pcibios_setup_phb_resources(hose); + + /* Scan children */ + hose->last_busno = bus->subordinate = pci_scan_child_bus(bus); +} + +static int __init pcibios_init(void) +{ + struct pci_controller *hose, *tmp; + int next_busno = 0; + + printk(KERN_INFO "PCI: Probing PCI hardware\n"); + + if (pci_flags & PCI_REASSIGN_ALL_BUS) { + printk(KERN_INFO "setting pci_asign_all_busses\n"); + pci_assign_all_buses = 1; + } + + /* Scan all of the recorded PCI controllers. */ + list_for_each_entry_safe(hose, tmp, &hose_list, list_node) { + if (pci_assign_all_buses) + hose->first_busno = next_busno; + hose->last_busno = 0xff; + pcibios_scan_phb(hose); + printk(KERN_INFO "calling pci_bus_add_devices()\n"); + pci_bus_add_devices(hose->bus); + if (pci_assign_all_buses || next_busno <= hose->last_busno) + next_busno = hose->last_busno + \ + pcibios_assign_bus_offset; + } + pci_bus_count = next_busno; + + /* OpenFirmware based machines need a map of OF bus + * numbers vs. kernel bus numbers since we may have to + * remap them. + */ + if (pci_assign_all_buses) + pcibios_make_OF_bus_map(); + + /* Call common code to handle resource allocation */ + pcibios_resource_survey(); + + return 0; +} + +subsys_initcall(pcibios_init); + +static struct pci_controller* +pci_bus_to_hose(int bus) +{ + struct pci_controller *hose, *tmp; + + list_for_each_entry_safe(hose, tmp, &hose_list, list_node) + if (bus >= hose->first_busno && bus <= hose->last_busno) + return hose; + return NULL; +} + +/* Provide information on locations of various I/O regions in physical + * memory. Do this on a per-card basis so that we choose the right + * root bridge. + * Note that the returned IO or memory base is a physical address + */ + +long sys_pciconfig_iobase(long which, unsigned long bus, unsigned long devfn) +{ + struct pci_controller *hose; + long result = -EOPNOTSUPP; + + hose = pci_bus_to_hose(bus); + if (!hose) + return -ENODEV; + + switch (which) { + case IOBASE_BRIDGE_NUMBER: + return (long)hose->first_busno; + case IOBASE_MEMORY: + return (long)hose->pci_mem_offset; + case IOBASE_IO: + return (long)hose->io_base_phys; + case IOBASE_ISA_IO: + return (long)isa_io_base; + case IOBASE_ISA_MEM: + return (long)isa_mem_base; + } + + return result; +} diff --git a/arch/microblaze/pci/xilinx_pci.c b/arch/microblaze/pci/xilinx_pci.c new file mode 100644 index 00000000000..7869a41b0f9 --- /dev/null +++ b/arch/microblaze/pci/xilinx_pci.c @@ -0,0 +1,168 @@ +/* + * PCI support for Xilinx plbv46_pci soft-core which can be used on + * Xilinx Virtex ML410 / ML510 boards. + * + * Copyright 2009 Roderick Colenbrander + * Copyright 2009 Secret Lab Technologies Ltd. + * + * The pci bridge fixup code was copied from ppc4xx_pci.c and was written + * by Benjamin Herrenschmidt. + * Copyright 2007 Ben. Herrenschmidt <benh@kernel.crashing.org>, IBM Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <linux/ioport.h> +#include <linux/of.h> +#include <linux/pci.h> +#include <asm/io.h> + +#define XPLB_PCI_ADDR 0x10c +#define XPLB_PCI_DATA 0x110 +#define XPLB_PCI_BUS 0x114 + +#define PCI_HOST_ENABLE_CMD (PCI_COMMAND_SERR | PCI_COMMAND_PARITY | \ + PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY) + +static struct of_device_id xilinx_pci_match[] = { + { .compatible = "xlnx,plbv46-pci-1.03.a", }, + {} +}; + +/** + * xilinx_pci_fixup_bridge - Block Xilinx PHB configuration. + */ +static void xilinx_pci_fixup_bridge(struct pci_dev *dev) +{ + struct pci_controller *hose; + int i; + + if (dev->devfn || dev->bus->self) + return; + + hose = pci_bus_to_host(dev->bus); + if (!hose) + return; + + if (!of_match_node(xilinx_pci_match, hose->dn)) + return; + + /* Hide the PCI host BARs from the kernel as their content doesn't + * fit well in the resource management + */ + for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { + dev->resource[i].start = 0; + dev->resource[i].end = 0; + dev->resource[i].flags = 0; + } + + dev_info(&dev->dev, "Hiding Xilinx plb-pci host bridge resources %s\n", + pci_name(dev)); +} +DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, xilinx_pci_fixup_bridge); + +#ifdef DEBUG +/** + * xilinx_pci_exclude_device - Don't do config access for non-root bus + * + * This is a hack. Config access to any bus other than bus 0 does not + * currently work on the ML510 so we prevent it here. + */ +static int +xilinx_pci_exclude_device(struct pci_controller *hose, u_char bus, u8 devfn) +{ + return (bus != 0); +} + +/** + * xilinx_early_pci_scan - List pci config space for available devices + * + * List pci devices in very early phase. + */ +void __init xilinx_early_pci_scan(struct pci_controller *hose) +{ + u32 bus = 0; + u32 val, dev, func, offset; + + /* Currently we have only 2 device connected - up-to 32 devices */ + for (dev = 0; dev < 2; dev++) { + /* List only first function number - up-to 8 functions */ + for (func = 0; func < 1; func++) { + printk(KERN_INFO "%02x:%02x:%02x", bus, dev, func); + /* read the first 64 standardized bytes */ + /* Up-to 192 bytes can be list of capabilities */ + for (offset = 0; offset < 64; offset += 4) { + early_read_config_dword(hose, bus, + PCI_DEVFN(dev, func), offset, &val); + if (offset == 0 && val == 0xFFFFFFFF) { + printk(KERN_CONT "\nABSENT"); + break; + } + if (!(offset % 0x10)) + printk(KERN_CONT "\n%04x: ", offset); + + printk(KERN_CONT "%08x ", val); + } + printk(KERN_INFO "\n"); + } + } +} +#else +void __init xilinx_early_pci_scan(struct pci_controller *hose) +{ +} +#endif + +/** + * xilinx_pci_init - Find and register a Xilinx PCI host bridge + */ +void __init xilinx_pci_init(void) +{ + struct pci_controller *hose; + struct resource r; + void __iomem *pci_reg; + struct device_node *pci_node; + + pci_node = of_find_matching_node(NULL, xilinx_pci_match); + if (!pci_node) + return; + + if (of_address_to_resource(pci_node, 0, &r)) { + pr_err("xilinx-pci: cannot resolve base address\n"); + return; + } + + hose = pcibios_alloc_controller(pci_node); + if (!hose) { + pr_err("xilinx-pci: pcibios_alloc_controller() failed\n"); + return; + } + + /* Setup config space */ + setup_indirect_pci(hose, r.start + XPLB_PCI_ADDR, + r.start + XPLB_PCI_DATA, + INDIRECT_TYPE_SET_CFG_TYPE); + + /* According to the xilinx plbv46_pci documentation the soft-core starts + * a self-init when the bus master enable bit is set. Without this bit + * set the pci bus can't be scanned. + */ + early_write_config_word(hose, 0, 0, PCI_COMMAND, PCI_HOST_ENABLE_CMD); + + /* Set the max latency timer to 255 */ + early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0xff); + + /* Set the max bus number to 255, and bus/subbus no's to 0 */ + pci_reg = of_iomap(pci_node, 0); + out_be32(pci_reg + XPLB_PCI_BUS, 0x000000ff); + iounmap(pci_reg); + + /* Register the host bridge with the linux kernel! */ + pci_process_bridge_OF_ranges(hose, pci_node, + INDIRECT_TYPE_SET_CFG_TYPE); + + pr_info("xilinx-pci: Registered PCI host bridge\n"); + xilinx_early_pci_scan(hose); +} |