diff options
Diffstat (limited to 'arch/microblaze')
25 files changed, 438 insertions, 117 deletions
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig index 2db722d80d4..bbd8327f189 100644 --- a/arch/microblaze/Kconfig +++ b/arch/microblaze/Kconfig @@ -6,6 +6,7 @@ mainmenu "Linux/Microblaze Kernel Configuration" config MICROBLAZE def_bool y select HAVE_LMB + select USB_ARCH_HAS_EHCI select ARCH_WANT_OPTIONAL_GPIOLIB config SWAP diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile index 8439598d465..34187354304 100644 --- a/arch/microblaze/Makefile +++ b/arch/microblaze/Makefile @@ -37,12 +37,12 @@ CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR) += -mxl-pattern-compare CPUFLAGS-1 += $(call cc-option,-mcpu=v$(CPU_VER)) # r31 holds current when in kernel mode -KBUILD_KERNEL += -ffixed-r31 $(CPUFLAGS-1) $(CPUFLAGS-2) +KBUILD_CFLAGS += -ffixed-r31 $(CPUFLAGS-1) $(CPUFLAGS-2) LDFLAGS := LDFLAGS_vmlinux := -LIBGCC := $(shell $(CC) $(KBUILD_KERNEL) -print-libgcc-file-name) +LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name) head-y := arch/microblaze/kernel/head.o libs-y += arch/microblaze/lib/ @@ -53,22 +53,41 @@ core-y += arch/microblaze/platform/ boot := arch/microblaze/boot +# Are we making a simpleImage.<boardname> target? If so, crack out the boardname +DTB:=$(subst simpleImage.,,$(filter simpleImage.%, $(MAKECMDGOALS))) + +ifneq ($(DTB),) + core-y += $(boot)/ +endif + # defines filename extension depending memory management type ifeq ($(CONFIG_MMU),) MMU := -nommu endif -export MMU +export MMU DTB all: linux.bin +BOOT_TARGETS = linux.bin linux.bin.gz simpleImage.% + archclean: $(Q)$(MAKE) $(clean)=$(boot) -linux.bin linux.bin.gz: vmlinux +$(BOOT_TARGETS): vmlinux $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ define archhelp - echo '* linux.bin - Create raw binary' - echo ' linux.bin.gz - Create compressed raw binary' + echo '* linux.bin - Create raw binary' + echo ' linux.bin.gz - Create compressed raw binary' + echo ' simpleImage.<dt> - ELF image with $(arch)/boot/dts/<dt>.dts linked in' + echo ' - stripped elf with fdt blob + echo ' simpleImage.<dt>.unstrip - full ELF image with fdt blob' + echo ' *_defconfig - Select default config from arch/microblaze/configs' + echo '' + echo ' Targets with <dt> embed a device tree blob inside the image' + echo ' These targets support board with firmware that does not' + echo ' support passing a device tree directly. Replace <dt> with the' + echo ' name of a dts file from the arch/microblaze/boot/dts/ directory' + echo ' (minus the .dts extension).' endef diff --git a/arch/microblaze/boot/Makefile b/arch/microblaze/boot/Makefile index c2bb043a029..21f13322a4c 100644 --- a/arch/microblaze/boot/Makefile +++ b/arch/microblaze/boot/Makefile @@ -2,10 +2,24 @@ # arch/microblaze/boot/Makefile # -targets := linux.bin linux.bin.gz +obj-y += linked_dtb.o + +targets := linux.bin linux.bin.gz simpleImage.% OBJCOPYFLAGS_linux.bin := -O binary +# Where the DTS files live +dtstree := $(srctree)/$(src)/dts + +# Ensure system.dtb exists +$(obj)/linked_dtb.o: $(obj)/system.dtb + +# Generate system.dtb from $(DTB).dtb +ifneq ($(DTB),system) +$(obj)/system.dtb: $(obj)/$(DTB).dtb + $(call if_changed,cp) +endif + $(obj)/linux.bin: vmlinux FORCE [ -n $(CONFIG_INITRAMFS_SOURCE) ] && [ ! -e $(CONFIG_INITRAMFS_SOURCE) ] && \ touch $(CONFIG_INITRAMFS_SOURCE) || echo "No CPIO image" @@ -16,4 +30,27 @@ $(obj)/linux.bin.gz: $(obj)/linux.bin FORCE $(call if_changed,gzip) @echo 'Kernel: $@ is ready' ' (#'`cat .version`')' -clean-kernel += linux.bin linux.bin.gz +quiet_cmd_cp = CP $< $@$2 + cmd_cp = cat $< >$@$2 || (rm -f $@ && echo false) + +quiet_cmd_strip = STRIP $@ + cmd_strip = $(STRIP) -K _start -K _end -K __log_buf -K _fdt_start vmlinux -o $@ + +$(obj)/simpleImage.%: vmlinux FORCE + $(call if_changed,cp,.unstrip) + $(call if_changed,strip) + @echo 'Kernel: $@ is ready' ' (#'`cat .version`')' + +# Rule to build device tree blobs +DTC = $(objtree)/scripts/dtc/dtc + +# Rule to build device tree blobs +quiet_cmd_dtc = DTC $@ + cmd_dtc = $(DTC) -O dtb -o $(obj)/$*.dtb -b 0 -p 1024 $(dtstree)/$*.dts + +$(obj)/%.dtb: $(dtstree)/%.dts FORCE + $(call if_changed,dtc) + +clean-kernel += linux.bin linux.bin.gz simpleImage.* + +clean-files += *.dtb diff --git a/arch/microblaze/boot/dts/system.dts b/arch/microblaze/boot/dts/system.dts new file mode 120000 index 00000000000..7cb657892f2 --- /dev/null +++ b/arch/microblaze/boot/dts/system.dts @@ -0,0 +1 @@ +../../platform/generic/system.dts
\ No newline at end of file diff --git a/arch/microblaze/boot/linked_dtb.S b/arch/microblaze/boot/linked_dtb.S new file mode 100644 index 00000000000..cb2b537aebe --- /dev/null +++ b/arch/microblaze/boot/linked_dtb.S @@ -0,0 +1,3 @@ +.section __fdt_blob,"a" +.incbin "arch/microblaze/boot/system.dtb" + diff --git a/arch/microblaze/configs/mmu_defconfig b/arch/microblaze/configs/mmu_defconfig index 09c32962b66..bb7c374713a 100644 --- a/arch/microblaze/configs/mmu_defconfig +++ b/arch/microblaze/configs/mmu_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc6 -# Tue Aug 18 11:00:02 2009 +# Linux kernel version: 2.6.31 +# Thu Sep 24 10:28:50 2009 # CONFIG_MICROBLAZE=y # CONFIG_SWAP is not set @@ -42,11 +42,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=17 @@ -260,6 +261,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -357,12 +359,10 @@ CONFIG_NET_ETHERNET=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_KS8842 is not set +CONFIG_XILINX_EMACLITE=y CONFIG_NETDEV_1000=y CONFIG_NETDEV_10000=y - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -460,6 +460,7 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_DISPLAY_SUPPORT is not set # CONFIG_SOUND is not set # CONFIG_USB_SUPPORT is not set +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -488,6 +489,7 @@ CONFIG_EXT2_FS=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set @@ -546,7 +548,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -671,18 +672,20 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set # CONFIG_PAGE_POISONING is not set # CONFIG_SAMPLES is not set # CONFIG_KMEMCHECK is not set CONFIG_EARLY_PRINTK=y -CONFIG_HEART_BEAT=y +# CONFIG_HEART_BEAT is not set CONFIG_DEBUG_BOOTMEM=y # @@ -697,7 +700,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -729,11 +731,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/microblaze/configs/nommu_defconfig b/arch/microblaze/configs/nommu_defconfig index 8b638615a97..adb839bab70 100644 --- a/arch/microblaze/configs/nommu_defconfig +++ b/arch/microblaze/configs/nommu_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc6 -# Tue Aug 18 10:35:30 2009 +# Linux kernel version: 2.6.31 +# Thu Sep 24 10:29:43 2009 # CONFIG_MICROBLAZE=y # CONFIG_SWAP is not set @@ -44,11 +44,12 @@ CONFIG_BSD_PROCESS_ACCT_V3=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=17 @@ -243,6 +244,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -272,6 +274,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -279,7 +282,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -304,6 +306,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_OF_PARTS is not set # CONFIG_MTD_AR7_PARTS is not set # @@ -349,6 +352,7 @@ CONFIG_MTD_RAM=y # # CONFIG_MTD_COMPLEX_MAPPINGS is not set # CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_PHYSMAP_OF is not set CONFIG_MTD_UCLINUX=y # CONFIG_MTD_PLATRAM is not set @@ -429,12 +433,10 @@ CONFIG_NET_ETHERNET=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_KS8842 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y CONFIG_NETDEV_10000=y - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -535,7 +537,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set @@ -579,6 +581,7 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set @@ -639,7 +642,6 @@ CONFIG_ROMFS_BACKED_BY_BLOCK=y CONFIG_ROMFS_ON_BLOCK=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -710,18 +712,20 @@ CONFIG_DEBUG_INFO=y CONFIG_DEBUG_LIST=y CONFIG_DEBUG_SG=y # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_PAGE_POISONING is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_EARLY_PRINTK=y -CONFIG_HEART_BEAT=y +# CONFIG_HEART_BEAT is not set # CONFIG_DEBUG_BOOTMEM is not set # @@ -736,7 +740,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -768,11 +771,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/microblaze/include/asm/asm-compat.h b/arch/microblaze/include/asm/asm-compat.h new file mode 100644 index 00000000000..e7bc9dc11b5 --- /dev/null +++ b/arch/microblaze/include/asm/asm-compat.h @@ -0,0 +1,17 @@ +#ifndef _ASM_MICROBLAZE_ASM_COMPAT_H +#define _ASM_MICROBLAZE_ASM_COMPAT_H + +#include <asm/types.h> + +#ifdef __ASSEMBLY__ +# define stringify_in_c(...) __VA_ARGS__ +# define ASM_CONST(x) x +#else +/* This version of stringify will deal with commas... */ +# define __stringify_in_c(...) #__VA_ARGS__ +# define stringify_in_c(...) __stringify_in_c(__VA_ARGS__) " " +# define __ASM_CONST(x) x##UL +# define ASM_CONST(x) __ASM_CONST(x) +#endif + +#endif /* _ASM_MICROBLAZE_ASM_COMPAT_H */ diff --git a/arch/microblaze/include/asm/io.h b/arch/microblaze/include/asm/io.h index 7c3ec13b44d..fc9997b73c0 100644 --- a/arch/microblaze/include/asm/io.h +++ b/arch/microblaze/include/asm/io.h @@ -210,6 +210,9 @@ static inline void __iomem *__ioremap(phys_addr_t address, unsigned long size, #define in_be32(a) __raw_readl((const void __iomem __force *)(a)) #define in_be16(a) __raw_readw(a) +#define writel_be(v, a) out_be32((__force unsigned *)a, v) +#define readl_be(a) in_be32((__force unsigned *)a) + /* * Little endian */ diff --git a/arch/microblaze/include/asm/ipc.h b/arch/microblaze/include/asm/ipc.h deleted file mode 100644 index a46e3d9c2a3..00000000000 --- a/arch/microblaze/include/asm/ipc.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/ipc.h> diff --git a/arch/microblaze/include/asm/page.h b/arch/microblaze/include/asm/page.h index 72aceae8868..880c988c223 100644 --- a/arch/microblaze/include/asm/page.h +++ b/arch/microblaze/include/asm/page.h @@ -17,6 +17,7 @@ #include <linux/pfn.h> #include <asm/setup.h> +#include <asm/asm-compat.h> #include <linux/const.h> #ifdef __KERNEL__ @@ -26,6 +27,8 @@ #define PAGE_SIZE (_AC(1, UL) << PAGE_SHIFT) #define PAGE_MASK (~(PAGE_SIZE-1)) +#define LOAD_OFFSET ASM_CONST((CONFIG_KERNEL_START-CONFIG_KERNEL_BASE_ADDR)) + #ifndef __ASSEMBLY__ #define PAGE_UP(addr) (((addr)+((PAGE_SIZE)-1))&(~((PAGE_SIZE)-1))) diff --git a/arch/microblaze/include/asm/setup.h b/arch/microblaze/include/asm/setup.h index 27f8dafd8c3..ed67c9ed15b 100644 --- a/arch/microblaze/include/asm/setup.h +++ b/arch/microblaze/include/asm/setup.h @@ -38,7 +38,7 @@ extern void early_console_reg_tlb_alloc(unsigned int addr); void time_init(void); void init_IRQ(void); void machine_early_init(const char *cmdline, unsigned int ram, - unsigned int fdt); + unsigned int fdt, unsigned int msr); void machine_restart(char *cmd); void machine_shutdown(void); diff --git a/arch/microblaze/include/asm/syscall.h b/arch/microblaze/include/asm/syscall.h new file mode 100644 index 00000000000..048dfcd8d89 --- /dev/null +++ b/arch/microblaze/include/asm/syscall.h @@ -0,0 +1,99 @@ +#ifndef __ASM_MICROBLAZE_SYSCALL_H +#define __ASM_MICROBLAZE_SYSCALL_H + +#include <linux/kernel.h> +#include <linux/sched.h> +#include <asm/ptrace.h> + +/* The system call number is given by the user in R12 */ +static inline long syscall_get_nr(struct task_struct *task, + struct pt_regs *regs) +{ + return regs->r12; +} + +static inline void syscall_rollback(struct task_struct *task, + struct pt_regs *regs) +{ + /* TODO. */ +} + +static inline long syscall_get_error(struct task_struct *task, + struct pt_regs *regs) +{ + return IS_ERR_VALUE(regs->r3) ? regs->r3 : 0; +} + +static inline long syscall_get_return_value(struct task_struct *task, + struct pt_regs *regs) +{ + return regs->r3; +} + +static inline void syscall_set_return_value(struct task_struct *task, + struct pt_regs *regs, + int error, long val) +{ + if (error) + regs->r3 = -error; + else + regs->r3 = val; +} + +static inline microblaze_reg_t microblaze_get_syscall_arg(struct pt_regs *regs, + unsigned int n) +{ + switch (n) { + case 5: return regs->r10; + case 4: return regs->r9; + case 3: return regs->r8; + case 2: return regs->r7; + case 1: return regs->r6; + case 0: return regs->r5; + default: + BUG(); + } + return ~0; +} + +static inline void microblaze_set_syscall_arg(struct pt_regs *regs, + unsigned int n, + unsigned long val) +{ + switch (n) { + case 5: + regs->r10 = val; + case 4: + regs->r9 = val; + case 3: + regs->r8 = val; + case 2: + regs->r7 = val; + case 1: + regs->r6 = val; + case 0: + regs->r5 = val; + default: + BUG(); + } +} + +static inline void syscall_get_arguments(struct task_struct *task, + struct pt_regs *regs, + unsigned int i, unsigned int n, + unsigned long *args) +{ + while (n--) + *args++ = microblaze_get_syscall_arg(regs, i++); +} + +static inline void syscall_set_arguments(struct task_struct *task, + struct pt_regs *regs, + unsigned int i, unsigned int n, + const unsigned long *args) +{ + while (n--) + microblaze_set_syscall_arg(regs, i++, *args++); +} + +#endif /* __ASM_MICROBLAZE_SYSCALL_H */ diff --git a/arch/microblaze/kernel/cpu/cpuinfo.c b/arch/microblaze/kernel/cpu/cpuinfo.c index c411c6757de..3539babc1c1 100644 --- a/arch/microblaze/kernel/cpu/cpuinfo.c +++ b/arch/microblaze/kernel/cpu/cpuinfo.c @@ -28,6 +28,7 @@ const struct cpu_ver_key cpu_ver_lookup[] = { {"7.10.d", 0x0b}, {"7.20.a", 0x0c}, {"7.20.b", 0x0d}, + {"7.20.c", 0x0e}, /* FIXME There is no keycode defined in MBV for these versions */ {"2.10.a", 0x10}, {"3.00.a", 0x20}, @@ -49,6 +50,8 @@ const struct family_string_key family_string_lookup[] = { {"spartan3a", 0xa}, {"spartan3an", 0xb}, {"spartan3adsp", 0xc}, + {"spartan6", 0xd}, + {"virtex6", 0xe}, /* FIXME There is no key code defined for spartan2 */ {"spartan2", 0xf0}, {NULL, 0}, diff --git a/arch/microblaze/kernel/entry.S b/arch/microblaze/kernel/entry.S index c7353e79f4a..acc1f05d1e2 100644 --- a/arch/microblaze/kernel/entry.S +++ b/arch/microblaze/kernel/entry.S @@ -308,38 +308,69 @@ C_ENTRY(_user_exception): swi r12, r1, PTO+PT_R0; tovirt(r1,r1) - la r15, r0, ret_from_trap-8 /* where the trap should return need -8 to adjust for rtsd r15, 8*/ /* Jump to the appropriate function for the system call number in r12 * (r12 is not preserved), or return an error if r12 is not valid. The LP * register should point to the location where * the called function should return. [note that MAKE_SYS_CALL uses label 1] */ - /* See if the system call number is valid. */ + + # Step into virtual mode. + set_vms; + addik r11, r0, 3f + rtid r11, 0 + nop +3: + add r11, r0, CURRENT_TASK /* Get current task ptr into r11 */ + lwi r11, r11, TS_THREAD_INFO /* get thread info */ + lwi r11, r11, TI_FLAGS /* get flags in thread info */ + andi r11, r11, _TIF_WORK_SYSCALL_MASK + beqi r11, 4f + + addik r3, r0, -ENOSYS + swi r3, r1, PTO + PT_R3 + brlid r15, do_syscall_trace_enter + addik r5, r1, PTO + PT_R0 + + # do_syscall_trace_enter returns the new syscall nr. + addk r12, r0, r3 + lwi r5, r1, PTO+PT_R5; + lwi r6, r1, PTO+PT_R6; + lwi r7, r1, PTO+PT_R7; + lwi r8, r1, PTO+PT_R8; + lwi r9, r1, PTO+PT_R9; + lwi r10, r1, PTO+PT_R10; +4: +/* Jump to the appropriate function for the system call number in r12 + * (r12 is not preserved), or return an error if r12 is not valid. + * The LP register should point to the location where the called function + * should return. [note that MAKE_SYS_CALL uses label 1] */ + /* See if the system call number is valid */ addi r11, r12, -__NR_syscalls; - bgei r11,1f; + bgei r11,5f; /* Figure out which function to use for this system call. */ /* Note Microblaze barrel shift is optional, so don't rely on it */ add r12, r12, r12; /* convert num -> ptr */ add r12, r12, r12; /* Trac syscalls and stored them to r0_ram */ - lwi r3, r12, 0x400 + TOPHYS(r0_ram) + lwi r3, r12, 0x400 + r0_ram addi r3, r3, 1 - swi r3, r12, 0x400 + TOPHYS(r0_ram) + swi r3, r12, 0x400 + r0_ram + + # Find and jump into the syscall handler. + lwi r12, r12, sys_call_table + /* where the trap should return need -8 to adjust for rtsd r15, 8 */ + la r15, r0, ret_from_trap-8 + bra r12 - lwi r12, r12, TOPHYS(sys_call_table); /* Function ptr */ - /* Make the system call. to r12*/ - set_vms; - rtid r12, 0; - nop; /* The syscall number is invalid, return an error. */ -1: VM_ON; /* RETURN() expects virtual mode*/ +5: addi r3, r0, -ENOSYS; rtsd r15,8; /* looks like a normal subroutine return */ or r0, r0, r0 -/* Entry point used to return from a syscall/trap. */ +/* Entry point used to return from a syscall/trap */ /* We re-enable BIP bit before state restore */ C_ENTRY(ret_from_trap): set_bip; /* Ints masked for state restore*/ @@ -349,6 +380,23 @@ C_ENTRY(ret_from_trap): /* We're returning to user mode, so check for various conditions that * trigger rescheduling. */ + # FIXME: Restructure all these flag checks. + add r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */ + lwi r11, r11, TS_THREAD_INFO; /* get thread info */ + lwi r11, r11, TI_FLAGS; /* get flags in thread info */ + andi r11, r11, _TIF_WORK_SYSCALL_MASK + beqi r11, 1f + + swi r3, r1, PTO + PT_R3 + swi r4, r1, PTO + PT_R4 + brlid r15, do_syscall_trace_leave + addik r5, r1, PTO + PT_R0 + lwi r3, r1, PTO + PT_R3 + lwi r4, r1, PTO + PT_R4 +1: + + /* We're returning to user mode, so check for various conditions that + * trigger rescheduling. */ /* Get current task ptr into r11 */ add r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */ lwi r11, r11, TS_THREAD_INFO; /* get thread info */ diff --git a/arch/microblaze/kernel/exceptions.c b/arch/microblaze/kernel/exceptions.c index 0cb64a31e89..d9f70f83097 100644 --- a/arch/microblaze/kernel/exceptions.c +++ b/arch/microblaze/kernel/exceptions.c @@ -72,7 +72,8 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type, #endif #if 0 - printk(KERN_WARNING "Exception %02x in %s mode, FSR=%08x PC=%08x ESR=%08x\n", + printk(KERN_WARNING "Exception %02x in %s mode, FSR=%08x PC=%08x " \ + "ESR=%08x\n", type, user_mode(regs) ? "user" : "kernel", fsr, (unsigned int) regs->pc, (unsigned int) regs->esr); #endif @@ -80,42 +81,50 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type, switch (type & 0x1F) { case MICROBLAZE_ILL_OPCODE_EXCEPTION: if (user_mode(regs)) { - printk(KERN_WARNING "Illegal opcode exception in user mode.\n"); + pr_debug(KERN_WARNING "Illegal opcode exception " \ + "in user mode.\n"); _exception(SIGILL, regs, ILL_ILLOPC, addr); return; } - printk(KERN_WARNING "Illegal opcode exception in kernel mode.\n"); + printk(KERN_WARNING "Illegal opcode exception " \ + "in kernel mode.\n"); die("opcode exception", regs, SIGBUS); break; case MICROBLAZE_IBUS_EXCEPTION: if (user_mode(regs)) { - printk(KERN_WARNING "Instruction bus error exception in user mode.\n"); + pr_debug(KERN_WARNING "Instruction bus error " \ + "exception in user mode.\n"); _exception(SIGBUS, regs, BUS_ADRERR, addr); return; } - printk(KERN_WARNING "Instruction bus error exception in kernel mode.\n"); + printk(KERN_WARNING "Instruction bus error exception " \ + "in kernel mode.\n"); die("bus exception", regs, SIGBUS); break; case MICROBLAZE_DBUS_EXCEPTION: if (user_mode(regs)) { - printk(KERN_WARNING "Data bus error exception in user mode.\n"); + pr_debug(KERN_WARNING "Data bus error exception " \ + "in user mode.\n"); _exception(SIGBUS, regs, BUS_ADRERR, addr); return; } - printk(KERN_WARNING "Data bus error exception in kernel mode.\n"); + printk(KERN_WARNING "Data bus error exception " \ + "in kernel mode.\n"); die("bus exception", regs, SIGBUS); break; case MICROBLAZE_DIV_ZERO_EXCEPTION: if (user_mode(regs)) { - printk(KERN_WARNING "Divide by zero exception in user mode\n"); - _exception(SIGILL, regs, ILL_ILLOPC, addr); + pr_debug(KERN_WARNING "Divide by zero exception " \ + "in user mode\n"); + _exception(SIGILL, regs, FPE_INTDIV, addr); return; } - printk(KERN_WARNING "Divide by zero exception in kernel mode.\n"); + printk(KERN_WARNING "Divide by zero exception " \ + "in kernel mode.\n"); die("Divide by exception", regs, SIGBUS); break; case MICROBLAZE_FPU_EXCEPTION: - printk(KERN_WARNING "FPU exception\n"); + pr_debug(KERN_WARNING "FPU exception\n"); /* IEEE FP exception */ /* I removed fsr variable and use code var for storing fsr */ if (fsr & FSR_IO) @@ -133,7 +142,7 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type, #ifdef CONFIG_MMU case MICROBLAZE_PRIVILEGED_EXCEPTION: - printk(KERN_WARNING "Privileged exception\n"); + pr_debug(KERN_WARNING "Privileged exception\n"); /* "brk r0,r0" - used as debug breakpoint */ if (get_user(code, (unsigned long *)regs->pc) == 0 && code == 0x980c0000) { diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S index e41c6ce2a7b..697ce3007f3 100644 --- a/arch/microblaze/kernel/head.S +++ b/arch/microblaze/kernel/head.S @@ -54,6 +54,16 @@ ENTRY(_start) mfs r1, rmsr andi r1, r1, ~2 mts rmsr, r1 +/* + * Here is checking mechanism which check if Microblaze has msr instructions + * We load msr and compare it with previous r1 value - if is the same, + * msr instructions works if not - cpu don't have them. + */ + /* r8=0 - I have msr instr, 1 - I don't have them */ + rsubi r0, r0, 1 /* set the carry bit */ + msrclr r0, 0x4 /* try to clear it */ + /* read the carry bit, r8 will be '0' if msrclr exists */ + addik r8, r0, 0 /* r7 may point to an FDT, or there may be one linked in. if it's in r7, we've got to save it away ASAP. @@ -209,8 +219,8 @@ start_here: * Please see $(ARCH)/mach-$(SUBARCH)/setup.c for * the function. */ - la r8, r0, machine_early_init - brald r15, r8 + la r9, r0, machine_early_init + brald r15, r9 nop #ifndef CONFIG_MMU diff --git a/arch/microblaze/kernel/hw_exception_handler.S b/arch/microblaze/kernel/hw_exception_handler.S index 3288c973767..6b0288ebccd 100644 --- a/arch/microblaze/kernel/hw_exception_handler.S +++ b/arch/microblaze/kernel/hw_exception_handler.S @@ -84,9 +84,10 @@ #define NUM_TO_REG(num) r ## num #ifdef CONFIG_MMU -/* FIXME you can't change first load of MSR because there is - * hardcoded jump bri 4 */ #define RESTORE_STATE \ + lwi r5, r1, 0; \ + mts rmsr, r5; \ + nop; \ lwi r3, r1, PT_R3; \ lwi r4, r1, PT_R4; \ lwi r5, r1, PT_R5; \ @@ -309,6 +310,9 @@ _hw_exception_handler: lwi r31, r0, TOPHYS(PER_CPU(CURRENT_SAVE)) /* get saved current */ #endif + mfs r5, rmsr; + nop + swi r5, r1, 0; mfs r3, resr nop mfs r4, rear; @@ -380,6 +384,8 @@ handle_other_ex: /* Handle Other exceptions here */ addk r8, r17, r0; /* Load exception address */ bralid r15, full_exception; /* Branch to the handler */ nop; + mts r0, rfsr; /* Clear sticky fsr */ + nop /* * Trigger execution of the signal handler by enabling diff --git a/arch/microblaze/kernel/init_task.c b/arch/microblaze/kernel/init_task.c index 67da22579b6..b5d711f94ff 100644 --- a/arch/microblaze/kernel/init_task.c +++ b/arch/microblaze/kernel/init_task.c @@ -19,9 +19,8 @@ static struct signal_struct init_signals = INIT_SIGNALS(init_signals); static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand); -union thread_union init_thread_union - __attribute__((__section__(".data.init_task"))) = -{ INIT_THREAD_INFO(init_task) }; +union thread_union init_thread_union __init_task_data = + { INIT_THREAD_INFO(init_task) }; struct task_struct init_task = INIT_TASK(init_task); EXPORT_SYMBOL(init_task); diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c index 00b12c6d532..4201c743cc9 100644 --- a/arch/microblaze/kernel/process.c +++ b/arch/microblaze/kernel/process.c @@ -235,6 +235,7 @@ void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long usp) regs->pc = pc; regs->r1 = usp; regs->pt_mode = 0; + regs->msr |= MSR_UMS; } #ifdef CONFIG_MMU diff --git a/arch/microblaze/kernel/ptrace.c b/arch/microblaze/kernel/ptrace.c index 53ff39af6a5..4b3ac32754d 100644 --- a/arch/microblaze/kernel/ptrace.c +++ b/arch/microblaze/kernel/ptrace.c @@ -29,6 +29,10 @@ #include <linux/sched.h> #include <linux/ptrace.h> #include <linux/signal.h> +#include <linux/elf.h> +#include <linux/audit.h> +#include <linux/seccomp.h> +#include <linux/tracehook.h> #include <linux/errno.h> #include <asm/processor.h> @@ -174,6 +178,64 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) return rval; } +asmlinkage long do_syscall_trace_enter(struct pt_regs *regs) +{ + long ret = 0; + + secure_computing(regs->r12); + + if (test_thread_flag(TIF_SYSCALL_TRACE) && + tracehook_report_syscall_entry(regs)) + /* + * Tracing decided this syscall should not happen. + * We'll return a bogus call number to get an ENOSYS + * error, but leave the original number in regs->regs[0]. + */ + ret = -1L; + + if (unlikely(current->audit_context)) + audit_syscall_entry(EM_XILINX_MICROBLAZE, regs->r12, + regs->r5, regs->r6, + regs->r7, regs->r8); + + return ret ?: regs->r12; +} + +asmlinkage void do_syscall_trace_leave(struct pt_regs *regs) +{ + int step; + + if (unlikely(current->audit_context)) + audit_syscall_exit(AUDITSC_RESULT(regs->r3), regs->r3); + + step = test_thread_flag(TIF_SINGLESTEP); + if (step || test_thread_flag(TIF_SYSCALL_TRACE)) + tracehook_report_syscall_exit(regs, step); +} + +#if 0 +static asmlinkage void syscall_trace(void) +{ + if (!test_thread_flag(TIF_SYSCALL_TRACE)) + return; + if (!(current->ptrace & PT_PTRACED)) + return; + /* The 0x80 provides a way for the tracing parent to distinguish + between a syscall stop and SIGTRAP delivery */ + ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) + ? 0x80 : 0)); + /* + * this isn't the same as continuing with a signal, but it will do + * for normal use. strace only continues with a signal if the + * stopping signal is not SIGTRAP. -brl + */ + if (current->exit_code) { + send_sig(current->exit_code, current, 1); + current->exit_code = 0; + } +} +#endif + void ptrace_disable(struct task_struct *child) { /* nothing to do */ diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c index 2a97bf513b6..8c1e0f4dcf1 100644 --- a/arch/microblaze/kernel/setup.c +++ b/arch/microblaze/kernel/setup.c @@ -94,7 +94,7 @@ inline unsigned get_romfs_len(unsigned *addr) #endif /* CONFIG_MTD_UCLINUX_EBSS */ void __init machine_early_init(const char *cmdline, unsigned int ram, - unsigned int fdt) + unsigned int fdt, unsigned int msr) { unsigned long *src, *dst = (unsigned long *)0x0; @@ -157,6 +157,16 @@ void __init machine_early_init(const char *cmdline, unsigned int ram, early_printk("New klimit: 0x%08x\n", (unsigned)klimit); #endif +#if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR + if (msr) + early_printk("!!!Your kernel has setup MSR instruction but " + "CPU don't have it %d\n", msr); +#else + if (!msr) + early_printk("!!!Your kernel not setup MSR instruction but " + "CPU have it %d\n", msr); +#endif + for (src = __ivt_start; src < __ivt_end; src++, dst++) *dst = *src; diff --git a/arch/microblaze/kernel/sys_microblaze.c b/arch/microblaze/kernel/sys_microblaze.c index b96f1682bb2..07cabed4b94 100644 --- a/arch/microblaze/kernel/sys_microblaze.c +++ b/arch/microblaze/kernel/sys_microblaze.c @@ -23,7 +23,6 @@ #include <linux/mman.h> #include <linux/sys.h> #include <linux/ipc.h> -#include <linux/utsname.h> #include <linux/file.h> #include <linux/module.h> #include <linux/err.h> diff --git a/arch/microblaze/kernel/vmlinux.lds.S b/arch/microblaze/kernel/vmlinux.lds.S index ec5fa91a48d..e704188d785 100644 --- a/arch/microblaze/kernel/vmlinux.lds.S +++ b/arch/microblaze/kernel/vmlinux.lds.S @@ -12,13 +12,16 @@ OUTPUT_FORMAT("elf32-microblaze", "elf32-microblaze", "elf32-microblaze") OUTPUT_ARCH(microblaze) ENTRY(_start) +#include <asm/page.h> #include <asm-generic/vmlinux.lds.h> +#include <asm/thread_info.h> jiffies = jiffies_64 + 4; SECTIONS { . = CONFIG_KERNEL_START; - .text : { + _start = CONFIG_KERNEL_BASE_ADDR; + .text : AT(ADDR(.text) - LOAD_OFFSET) { _text = . ; _stext = . ; *(.text .text.*) @@ -33,24 +36,22 @@ SECTIONS { } . = ALIGN (4) ; - _fdt_start = . ; /* place for fdt blob */ - . = . + 0x4000; - _fdt_end = . ; + __fdt_blob : AT(ADDR(__fdt_blob) - LOAD_OFFSET) { + _fdt_start = . ; /* place for fdt blob */ + *(__fdt_blob) ; /* Any link-placed DTB */ + . = _fdt_start + 0x4000; /* Pad up to 16kbyte */ + _fdt_end = . ; + } . = ALIGN(16); RODATA - . = ALIGN(16); - __ex_table : { - __start___ex_table = .; - *(__ex_table) - __stop___ex_table = .; - } + EXCEPTION_TABLE(16) /* * sdata2 section can go anywhere, but must be word aligned * and SDA2_BASE must point to the middle of it */ - .sdata2 : { + .sdata2 : AT(ADDR(.sdata2) - LOAD_OFFSET) { _ssrw = .; . = ALIGN(4096); /* page aligned when MMU used - origin 0x8 */ *(.sdata2) @@ -61,12 +62,7 @@ SECTIONS { } _sdata = . ; - .data ALIGN (4096) : { /* page aligned when MMU used - origin 0x4 */ - DATA_DATA - CONSTRUCTORS - } - . = ALIGN(32); - .data.cacheline_aligned : { *(.data.cacheline_aligned) } + RW_DATA_SECTION(32, PAGE_SIZE, THREAD_SIZE) _edata = . ; /* Reserve some low RAM for r0 based memory references */ @@ -74,18 +70,14 @@ SECTIONS { r0_ram = . ; . = . + 4096; /* a page should be enough */ - /* The initial task */ - . = ALIGN(8192); - .data.init_task : { *(.data.init_task) } - /* Under the microblaze ABI, .sdata and .sbss must be contiguous */ . = ALIGN(8); - .sdata : { + .sdata : AT(ADDR(.sdata) - LOAD_OFFSET) { _ssro = .; *(.sdata) } - .sbss : { + .sbss : AT(ADDR(.sbss) - LOAD_OFFSET) { _ssbss = .; *(.sbss) _esbss = .; @@ -96,47 +88,36 @@ SECTIONS { __init_begin = .; - . = ALIGN(4096); - .init.text : { - _sinittext = . ; - INIT_TEXT - _einittext = .; - } + INIT_TEXT_SECTION(PAGE_SIZE) - .init.data : { + .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) { INIT_DATA } . = ALIGN(4); - .init.ivt : { + .init.ivt : AT(ADDR(.init.ivt) - LOAD_OFFSET) { __ivt_start = .; *(.init.ivt) __ivt_end = .; } - .init.setup : { - __setup_start = .; - *(.init.setup) - __setup_end = .; + .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) { + INIT_SETUP(0) } - .initcall.init : { - __initcall_start = .; - INITCALLS - __initcall_end = .; + .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET ) { + INIT_CALLS } - .con_initcall.init : { - __con_initcall_start = .; - *(.con_initcall.init) - __con_initcall_end = .; + .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) { + CON_INITCALL } SECURITY_INIT __init_end_before_initramfs = .; - .init.ramfs ALIGN(4096) : { + .init.ramfs ALIGN(4096) : AT(ADDR(.init.ramfs) - LOAD_OFFSET) { __initramfs_start = .; *(.init.ramfs) __initramfs_end = .; @@ -152,7 +133,8 @@ SECTIONS { } __init_end = .; - .bss ALIGN (4096) : { /* page aligned when MMU used */ + .bss ALIGN (4096) : AT(ADDR(.bss) - LOAD_OFFSET) { + /* page aligned when MMU used */ __bss_start = . ; *(.bss*) *(COMMON) diff --git a/arch/microblaze/mm/init.c b/arch/microblaze/mm/init.c index 1110784eb3f..a44892e7cd5 100644 --- a/arch/microblaze/mm/init.c +++ b/arch/microblaze/mm/init.c @@ -180,7 +180,8 @@ void free_initrd_mem(unsigned long start, unsigned long end) totalram_pages++; pages++; } - printk(KERN_NOTICE "Freeing initrd memory: %dk freed\n", pages); + printk(KERN_NOTICE "Freeing initrd memory: %dk freed\n", + (int)(pages * (PAGE_SIZE / 1024))); } #endif |