summaryrefslogtreecommitdiffstats
path: root/arch/mips/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/Kconfig')
-rw-r--r--arch/mips/Kconfig154
1 files changed, 77 insertions, 77 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 5cd695f905a..7a469acee33 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -12,6 +12,7 @@ config MIPS
select HAVE_ARCH_KGDB
select HAVE_ARCH_SECCOMP_FILTER
select HAVE_ARCH_TRACEHOOK
+ select HAVE_BPF_JIT if !CPU_MICROMIPS
select ARCH_HAVE_CUSTOM_GPIO_H
select HAVE_FUNCTION_TRACER
select HAVE_FUNCTION_TRACE_MCOUNT_TEST
@@ -50,6 +51,8 @@ config MIPS
select CLONE_BACKWARDS
select HAVE_DEBUG_STACKOVERFLOW
select HAVE_CC_STACKPROTECTOR
+ select CPU_PM if CPU_IDLE
+ select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
menu "Machine selection"
@@ -83,6 +86,7 @@ config AR7
select SYS_HAS_EARLY_PRINTK
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_SUPPORTS_MIPS16
select SYS_SUPPORTS_ZBOOT_UART16550
select ARCH_REQUIRE_GPIOLIB
select VLYNQ
@@ -106,6 +110,7 @@ config ATH79
select SYS_HAS_EARLY_PRINTK
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_MIPS16
help
Support for the Atheros AR71XX/AR724X/AR913X SoCs.
@@ -122,6 +127,7 @@ config BCM47XX
select NO_EXCEPT_FILL
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_SUPPORTS_MIPS16
select SYS_HAS_EARLY_PRINTK
select USE_GENERIC_EARLY_PRINTK_8250
help
@@ -168,9 +174,9 @@ config MACH_DECSTATION
bool "DECstations"
select BOOT_ELF32
select CEVT_DS1287
- select CEVT_R4K
+ select CEVT_R4K if CPU_R4X00
select CSRC_IOASIC
- select CSRC_R4K
+ select CSRC_R4K if CPU_R4X00
select CPU_DADDI_WORKAROUNDS if 64BIT
select CPU_R4000_WORKAROUNDS if 64BIT
select CPU_R4400_WORKAROUNDS if 64BIT
@@ -248,6 +254,7 @@ config LANTIQ
select SYS_HAS_CPU_MIPS32_R2
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_MIPS16
select SYS_SUPPORTS_MULTITHREADING
select SYS_HAS_EARLY_PRINTK
select ARCH_REQUIRE_GPIOLIB
@@ -330,6 +337,7 @@ config MIPS_MALTA
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_SUPPORTS_MIPS_CMP
select SYS_SUPPORTS_MIPS_CPS
+ select SYS_SUPPORTS_MIPS16
select SYS_SUPPORTS_MULTITHREADING
select SYS_SUPPORTS_SMARTMIPS
select SYS_SUPPORTS_ZBOOT
@@ -361,6 +369,7 @@ config MIPS_SEAD3
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_SUPPORTS_SMARTMIPS
select SYS_SUPPORTS_MICROMIPS
+ select SYS_SUPPORTS_MIPS16
select USB_EHCI_BIG_ENDIAN_DESC
select USB_EHCI_BIG_ENDIAN_MMIO
select USE_OF
@@ -380,6 +389,7 @@ config MACH_VR41XX
select CEVT_R4K
select CSRC_R4K
select SYS_HAS_CPU_VR41XX
+ select SYS_SUPPORTS_MIPS16
select ARCH_REQUIRE_GPIOLIB
config NXP_STB220
@@ -407,6 +417,7 @@ config PMC_MSP
select SYS_HAS_CPU_MIPS32_R2
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_MIPS16
select IRQ_CPU
select SERIAL_8250
select SERIAL_8250_CONSOLE
@@ -430,6 +441,7 @@ config RALINK
select SYS_HAS_CPU_MIPS32_R2
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_SUPPORTS_MIPS16
select SYS_HAS_EARLY_PRINTK
select HAVE_MACH_CLKDEV
select CLKDEV_LOOKUP
@@ -674,7 +686,6 @@ config SNI_RM
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_HIGHMEM
select SYS_SUPPORTS_LITTLE_ENDIAN
- select USE_GENERIC_EARLY_PRINTK_8250
help
The SNI RM200/300/400 are MIPS-based machines manufactured by
Siemens Nixdorf Informationssysteme (SNI), parent company of Pyramid
@@ -721,6 +732,11 @@ config CAVIUM_OCTEON_SOC
select ZONE_DMA32
select HOLES_IN_ZONE
select ARCH_REQUIRE_GPIOLIB
+ select LIBFDT
+ select USE_OF
+ select ARCH_SPARSEMEM_ENABLE
+ select SYS_SUPPORTS_SMP
+ select NR_CPUS_DEFAULT_16
help
This option supports all of the Octeon reference boards from Cavium
Networks. It builds a kernel that dynamically determines the Octeon
@@ -789,6 +805,25 @@ config NLM_XLP_BOARD
This board is based on Netlogic XLP Processor.
Say Y here if you have a XLP based board.
+config MIPS_PARAVIRT
+ bool "Para-Virtualized guest system"
+ select CEVT_R4K
+ select CSRC_R4K
+ select DMA_COHERENT
+ select SYS_SUPPORTS_64BIT_KERNEL
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_SMP
+ select NR_CPUS_DEFAULT_4
+ select SYS_HAS_EARLY_PRINTK
+ select SYS_HAS_CPU_MIPS32_R2
+ select SYS_HAS_CPU_MIPS64_R2
+ select SYS_HAS_CPU_CAVIUM_OCTEON
+ select HW_HAS_PCI
+ select SWAP_IO_SPACE
+ help
+ This option supports guest running under ????
+
endchoice
source "arch/mips/alchemy/Kconfig"
@@ -809,6 +844,7 @@ source "arch/mips/cavium-octeon/Kconfig"
source "arch/mips/loongson/Kconfig"
source "arch/mips/loongson1/Kconfig"
source "arch/mips/netlogic/Kconfig"
+source "arch/mips/paravirt/Kconfig"
endmenu
@@ -1059,6 +1095,7 @@ config SOC_PNX833X
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_MIPS16
select CPU_MIPSR2_IRQ_VI
config SOC_PNX8335
@@ -1398,16 +1435,11 @@ config CPU_SB1
config CPU_CAVIUM_OCTEON
bool "Cavium Octeon processor"
depends on SYS_HAS_CPU_CAVIUM_OCTEON
- select ARCH_SPARSEMEM_ENABLE
select CPU_HAS_PREFETCH
select CPU_SUPPORTS_64BIT_KERNEL
- select SYS_SUPPORTS_SMP
- select NR_CPUS_DEFAULT_16
select WEAK_ORDERING
select CPU_SUPPORTS_HIGHMEM
select CPU_SUPPORTS_HUGEPAGES
- select LIBFDT
- select USE_OF
select USB_EHCI_BIG_ENDIAN_MMIO
select MIPS_L1_CACHE_SHIFT_7
help
@@ -1659,6 +1691,12 @@ config SYS_HAS_CPU_XLR
config SYS_HAS_CPU_XLP
bool
+config MIPS_MALTA_PM
+ depends on MIPS_MALTA
+ depends on PCI
+ bool
+ default y
+
#
# CPU may reorder R->R, R->W, W->R, W->W
# Reordering beyond LL and SC is handled in WEAK_REORDERING_BEYOND_LLSC
@@ -1756,14 +1794,14 @@ config KVM_GUEST
help
Select this option if building a guest kernel for KVM (Trap & Emulate) mode
-config KVM_HOST_FREQ
- int "KVM Host Processor Frequency (MHz)"
+config KVM_GUEST_TIMER_FREQ
+ int "Count/Compare Timer Frequency (MHz)"
depends on KVM_GUEST
- default 500
+ default 100
help
- Select this option if building a guest kernel for KVM to skip
- RTC emulation when determining guest CPU Frequency. Instead, the guest
- processor frequency is automatically derived from the host frequency.
+ Set this to non-zero if building a guest kernel for KVM to skip RTC
+ emulation when determining guest CPU Frequency. Instead, the guest's
+ timer frequency is specified directly.
choice
prompt "Kernel page size"
@@ -1842,7 +1880,7 @@ config FORCE_MAX_ZONEORDER
config CEVT_GIC
bool "Use GIC global counter for clock events"
- depends on IRQ_GIC && !(MIPS_SEAD3 || MIPS_MT_SMTC)
+ depends on IRQ_GIC && !MIPS_SEAD3
help
Use the GIC global counter for the clock events. The R4K clock
event driver is always present, so if the platform ends up not
@@ -1895,19 +1933,8 @@ config CPU_R4K_CACHE_TLB
bool
default y if !(CPU_R3000 || CPU_R8000 || CPU_SB1 || CPU_TX39XX || CPU_CAVIUM_OCTEON)
-choice
- prompt "MIPS MT options"
-
-config MIPS_MT_DISABLED
- bool "Disable multithreading support"
- help
- Use this option if your platform does not support the MT ASE
- which is hardware multithreading support. On systems without
- an MT-enabled processor, this will be the only option that is
- available in this menu.
-
config MIPS_MT_SMP
- bool "Use 1 TC on each available VPE for SMP"
+ bool "MIPS MT SMP support (1 TC on each available VPE)"
depends on SYS_SUPPORTS_MULTITHREADING
select CPU_MIPSR2_IRQ_VI
select CPU_MIPSR2_IRQ_EI
@@ -1926,26 +1953,6 @@ config MIPS_MT_SMP
Intel Hyperthreading feature. For further information go to
<http://www.imgtec.com/mips/mips-multithreading.asp>.
-config MIPS_MT_SMTC
- bool "Use all TCs on all VPEs for SMP (DEPRECATED)"
- depends on CPU_MIPS32_R2
- depends on SYS_SUPPORTS_MULTITHREADING
- depends on !MIPS_CPS
- select CPU_MIPSR2_IRQ_VI
- select CPU_MIPSR2_IRQ_EI
- select MIPS_MT
- select SMP
- select SMP_UP
- select SYS_SUPPORTS_SMP
- select NR_CPUS_DEFAULT_8
- help
- This is a kernel model which is known as SMTC. This is
- supported on cores with the MT ASE and presents all TCs
- available on all VPEs to support SMP. For further
- information see <http://www.linux-mips.org/wiki/34K#SMTC>.
-
-endchoice
-
config MIPS_MT
bool
@@ -1967,7 +1974,7 @@ config SYS_SUPPORTS_MULTITHREADING
config MIPS_MT_FPAFF
bool "Dynamic FPU affinity for FP-intensive threads"
default y
- depends on MIPS_MT_SMP || MIPS_MT_SMTC
+ depends on MIPS_MT_SMP
config MIPS_VPE_LOADER
bool "VPE loader support."
@@ -1989,29 +1996,6 @@ config MIPS_VPE_LOADER_MT
default "y"
depends on MIPS_VPE_LOADER && !MIPS_CMP
-config MIPS_MT_SMTC_IM_BACKSTOP
- bool "Use per-TC register bits as backstop for inhibited IM bits"
- depends on MIPS_MT_SMTC
- default n
- help
- To support multiple TC microthreads acting as "CPUs" within
- a VPE, VPE-wide interrupt mask bits must be specially manipulated
- during interrupt handling. To support legacy drivers and interrupt
- controller management code, SMTC has a "backstop" to track and
- if necessary restore the interrupt mask. This has some performance
- impact on interrupt service overhead.
-
-config MIPS_MT_SMTC_IRQAFF
- bool "Support IRQ affinity API"
- depends on MIPS_MT_SMTC
- default n
- help
- Enables SMP IRQ affinity API (/proc/irq/*/smp_affinity, etc.)
- for SMTC Linux kernel. Requires platform support, of which
- an example can be found in the MIPS kernel i8259 and Malta
- platform code. Adds some overhead to interrupt dispatch, and
- should be used only if you know what you are doing.
-
config MIPS_VPE_LOADER_TOM
bool "Load VPE program into memory hidden from linux"
depends on MIPS_VPE_LOADER
@@ -2039,7 +2023,7 @@ config MIPS_VPE_APSP_API_MT
config MIPS_CMP
bool "MIPS CMP framework support (DEPRECATED)"
- depends on SYS_SUPPORTS_MIPS_CMP && !MIPS_MT_SMTC
+ depends on SYS_SUPPORTS_MIPS_CMP
select MIPS_GIC_IPI
select SYNC_R4K
select WEAK_ORDERING
@@ -2057,9 +2041,11 @@ config MIPS_CPS
depends on SYS_SUPPORTS_MIPS_CPS
select MIPS_CM
select MIPS_CPC
+ select MIPS_CPS_PM if HOTPLUG_CPU
select MIPS_GIC_IPI
select SMP
select SYNC_R4K if (CEVT_R4K || CSRC_R4K)
+ select SYS_SUPPORTS_HOTPLUG_CPU
select SYS_SUPPORTS_SMP
select WEAK_ORDERING
help
@@ -2069,6 +2055,9 @@ config MIPS_CPS
no external assistance. It is safe to enable this when hardware
support is unavailable.
+config MIPS_CPS_PM
+ bool
+
config MIPS_GIC_IPI
bool
@@ -2199,6 +2188,13 @@ config SYS_SUPPORTS_SMARTMIPS
config SYS_SUPPORTS_MICROMIPS
bool
+config SYS_SUPPORTS_MIPS16
+ bool
+ help
+ This option must be set if a kernel might be executed on a MIPS16-
+ enabled CPU even if MIPS16 is not actually being used. In other
+ words, it makes the kernel MIPS16-tolerant.
+
config CPU_SUPPORTS_MSA
bool
@@ -2239,7 +2235,7 @@ config NODES_SHIFT
config HW_PERF_EVENTS
bool "Enable hardware performance counter support for perf events"
- depends on PERF_EVENTS && !MIPS_MT_SMTC && OPROFILE=n && (CPU_MIPS32 || CPU_MIPS64 || CPU_R10000 || CPU_SB1 || CPU_CAVIUM_OCTEON || CPU_XLP)
+ depends on PERF_EVENTS && OPROFILE=n && (CPU_MIPS32 || CPU_MIPS64 || CPU_R10000 || CPU_SB1 || CPU_CAVIUM_OCTEON || CPU_XLP)
default y
help
Enable hardware performance counter support for perf events. If
@@ -2297,8 +2293,8 @@ config NR_CPUS_DEFAULT_64
bool
config NR_CPUS
- int "Maximum number of CPUs (2-64)"
- range 2 64
+ int "Maximum number of CPUs (2-256)"
+ range 2 256
depends on SMP
default "4" if NR_CPUS_DEFAULT_4
default "8" if NR_CPUS_DEFAULT_8
@@ -2671,12 +2667,16 @@ endmenu
config MIPS_EXTERNAL_TIMER
bool
-if CPU_SUPPORTS_CPUFREQ && MIPS_EXTERNAL_TIMER
menu "CPU Power Management"
+
+if CPU_SUPPORTS_CPUFREQ && MIPS_EXTERNAL_TIMER
source "drivers/cpufreq/Kconfig"
-endmenu
endif
+source "drivers/cpuidle/Kconfig"
+
+endmenu
+
source "net/Kconfig"
source "drivers/Kconfig"