diff options
Diffstat (limited to 'arch/mips/Makefile')
-rw-r--r-- | arch/mips/Makefile | 119 |
1 files changed, 113 insertions, 6 deletions
diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 346e803f153..e14ba5e01a3 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -52,6 +52,21 @@ ifdef CONFIG_CROSSCOMPILE CROSS_COMPILE := $(tool-prefix) endif +CHECKFLAGS-y += -D__linux__ -D__mips__ \ + -D_ABIO32=1 \ + -D_ABIN32=2 \ + -D_ABI64=3 +CHECKFLAGS-$(CONFIG_32BIT) += -D_MIPS_SIM=_ABIO32 \ + -D_MIPS_SZLONG=32 \ + -D__PTRDIFF_TYPE__=int +CHECKFLAGS-$(CONFIG_64BIT) += -m64 -D_MIPS_SIM=_ABI64 \ + -D_MIPS_SZLONG=64 \ + -D__PTRDIFF_TYPE__="long int" +CHECKFLAGS-$(CONFIG_CPU_BIG_ENDIAN) += -D__MIPSEB__ +CHECKFLAGS-$(CONFIG_CPU_LITTLE_ENDIAN) += -D__MIPSEL__ + +CHECKFLAGS = $(CHECKFLAGS-y) + ifdef CONFIG_BUILD_ELF64 gas-abi = 64 ld-emul = $(64bit-emul) @@ -79,9 +94,18 @@ endif cflags-y += -I $(TOPDIR)/include/asm/gcc cflags-y += -G 0 -mno-abicalls -fno-pic -pipe cflags-y += $(call cc-option, -finline-limit=100000) -LDFLAGS_vmlinux += -G 0 -static -n +LDFLAGS_vmlinux += -G 0 -static -n -nostdlib MODFLAGS += -mlong-calls +# +# We explicitly add the endianness specifier if needed, this allows +# to compile kernels with a toolchain for the other endianness. We +# carefully avoid to add it redundantly because gcc 3.3/3.4 complains +# when fed the toolchain default! +# +cflags-$(CONFIG_CPU_BIG_ENDIAN) += $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' && echo -EB) +cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' || echo -EL) + cflags-$(CONFIG_SB1XXX_CORELIS) += -mno-sched-prolog -fno-omit-frame-pointer # @@ -167,14 +191,22 @@ cflags-$(CONFIG_CPU_TX49XX) += \ $(call set_gccflags,r4600,mips3,r4600,mips3,mips2) \ -Wa,--trap -cflags-$(CONFIG_CPU_MIPS32) += \ +cflags-$(CONFIG_CPU_MIPS32_R1) += \ $(call set_gccflags,mips32,mips32,r4600,mips3,mips2) \ -Wa,--trap -cflags-$(CONFIG_CPU_MIPS64) += \ +cflags-$(CONFIG_CPU_MIPS32_R2) += \ + $(call set_gccflags,mips32r2,mips32r2,r4600,mips3,mips2) \ + -Wa,--trap + +cflags-$(CONFIG_CPU_MIPS64_R1) += \ $(call set_gccflags,mips64,mips64,r4600,mips3,mips2) \ -Wa,--trap +cflags-$(CONFIG_CPU_MIPS64_R2) += \ + $(call set_gccflags,mips64r2,mips64r2,r4600,mips3,mips2) \ + -Wa,--trap + cflags-$(CONFIG_CPU_R5000) += \ $(call set_gccflags,r5000,mips4,r5000,mips4,mips2) \ -Wa,--trap @@ -196,6 +228,7 @@ cflags-$(CONFIG_CPU_RM9000) += \ $(call set_gccflags,rm9000,mips4,r5000,mips4,mips2) \ -Wa,--trap + cflags-$(CONFIG_CPU_SB1) += \ $(call set_gccflags,sb1,mips64,r5000,mips4,mips2) \ -Wa,--trap @@ -266,6 +299,13 @@ cflags-$(CONFIG_MIPS_PB1550) += -Iinclude/asm-mips/mach-pb1x00 load-$(CONFIG_MIPS_PB1550) += 0xffffffff80100000 # +# AMD Alchemy Pb1200 eval board +# +libs-$(CONFIG_MIPS_PB1200) += arch/mips/au1000/pb1200/ +cflags-$(CONFIG_MIPS_PB1200) += -Iinclude/asm-mips/mach-pb1x00 +load-$(CONFIG_MIPS_PB1200) += 0xffffffff80100000 + +# # AMD Alchemy Db1000 eval board # libs-$(CONFIG_MIPS_DB1000) += arch/mips/au1000/db1x00/ @@ -294,6 +334,13 @@ cflags-$(CONFIG_MIPS_DB1550) += -Iinclude/asm-mips/mach-db1x00 load-$(CONFIG_MIPS_DB1550) += 0xffffffff80100000 # +# AMD Alchemy Db1200 eval board +# +libs-$(CONFIG_MIPS_DB1200) += arch/mips/au1000/pb1200/ +cflags-$(CONFIG_MIPS_DB1200) += -Iinclude/asm-mips/mach-db1x00 +load-$(CONFIG_MIPS_DB1200) += 0xffffffff80100000 + +# # AMD Alchemy Bosporus eval board # libs-$(CONFIG_MIPS_BOSPORUS) += arch/mips/au1000/db1x00/ @@ -323,6 +370,7 @@ load-$(CONFIG_MIPS_XXS1500) += 0xffffffff80100000 # Cobalt Server # core-$(CONFIG_MIPS_COBALT) += arch/mips/cobalt/ +cflags-$(CONFIG_MIPS_COBALT) += -Iinclude/asm-mips/cobalt load-$(CONFIG_MIPS_COBALT) += 0xffffffff80080000 # @@ -389,6 +437,13 @@ core-$(CONFIG_MIPS_SEAD) += arch/mips/mips-boards/sead/ load-$(CONFIG_MIPS_SEAD) += 0xffffffff80100000 # +# MIPS SIM +# +core-$(CONFIG_MIPS_SIM) += arch/mips/mips-boards/sim/ +cflags-$(CONFIG_MIPS_SIM) += -Iinclude/asm-mips/mach-sim +load-$(CONFIG_MIPS_SIM) += 0x80100000 + +# # Momentum Ocelot board # # The Ocelot setup.o must be linked early - it does the ioremap() for the @@ -514,6 +569,19 @@ load-$(CONFIG_CASIO_E55) += 0xffffffff80004000 load-$(CONFIG_TANBAC_TB022X) += 0xffffffff80000000 # +# Common Philips PNX8550 +# +core-$(CONFIG_SOC_PNX8550) += arch/mips/philips/pnx8550/common/ +cflags-$(CONFIG_SOC_PNX8550) += -Iinclude/asm-mips/mach-pnx8550 + +# +# Philips PNX8550 JBS board +# +libs-$(CONFIG_PNX8550_JBS) += arch/mips/philips/pnx8550/jbs/ +#cflags-$(CONFIG_PNX8550_JBS) += -Iinclude/asm-mips/mach-pnx8550 +load-$(CONFIG_PNX8550_JBS) += 0xffffffff80060000 + +# # SGI IP22 (Indy/Indigo2) # # Set the load address to >= 0xffffffff88069000 if you want to leave space for @@ -582,10 +650,20 @@ load-$(CONFIG_SGI_IP32) += 0xffffffff80004000 # removed (as happens, even if they have __initcall/module_init) # core-$(CONFIG_SIBYTE_BCM112X) += arch/mips/sibyte/sb1250/ -cflags-$(CONFIG_SIBYTE_BCM112X) += -Iinclude/asm-mips/mach-sibyte +cflags-$(CONFIG_SIBYTE_BCM112X) += -Iinclude/asm-mips/mach-sibyte \ + -DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL core-$(CONFIG_SIBYTE_SB1250) += arch/mips/sibyte/sb1250/ -cflags-$(CONFIG_SIBYTE_SB1250) += -Iinclude/asm-mips/mach-sibyte +cflags-$(CONFIG_SIBYTE_SB1250) += -Iinclude/asm-mips/mach-sibyte \ + -DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL + +core-$(CONFIG_SIBYTE_BCM1x55) += arch/mips/sibyte/bcm1480/ +cflags-$(CONFIG_SIBYTE_BCM1x55) += -Iinclude/asm-mips/mach-sibyte \ + -DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1480_ALL + +core-$(CONFIG_SIBYTE_BCM1x80) += arch/mips/sibyte/bcm1480/ +cflags-$(CONFIG_SIBYTE_BCM1x80) += -Iinclude/asm-mips/mach-sibyte \ + -DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1480_ALL # # Sibyte BCM91120x (Carmel) board @@ -593,6 +671,7 @@ cflags-$(CONFIG_SIBYTE_SB1250) += -Iinclude/asm-mips/mach-sibyte # Sibyte BCM91125C (CRhone) board # Sibyte BCM91125E (Rhone) board # Sibyte SWARM board +# Sibyte BCM91x80 (BigSur) board # libs-$(CONFIG_SIBYTE_CARMEL) += arch/mips/sibyte/swarm/ load-$(CONFIG_SIBYTE_CARMEL) := 0xffffffff80100000 @@ -606,6 +685,8 @@ libs-$(CONFIG_SIBYTE_SENTOSA) += arch/mips/sibyte/swarm/ load-$(CONFIG_SIBYTE_SENTOSA) := 0xffffffff80100000 libs-$(CONFIG_SIBYTE_SWARM) += arch/mips/sibyte/swarm/ load-$(CONFIG_SIBYTE_SWARM) := 0xffffffff80100000 +libs-$(CONFIG_SIBYTE_BIGSUR) += arch/mips/sibyte/swarm/ +load-$(CONFIG_SIBYTE_BIGSUR) := 0xffffffff80100000 # # SNI RM200 PCI @@ -619,6 +700,7 @@ load-$(CONFIG_SNI_RM200_PCI) += 0xffffffff80600000 # core-$(CONFIG_TOSHIBA_JMR3927) += arch/mips/jmr3927/rbhma3100/ \ arch/mips/jmr3927/common/ +cflags-$(CONFIG_TOSHIBA_JMR3927) += -Iinclude/asm-mips/mach-jmr3927 load-$(CONFIG_TOSHIBA_JMR3927) += 0xffffffff80050000 # @@ -629,6 +711,13 @@ core-$(CONFIG_TOSHIBA_RBTX4927) += arch/mips/tx4927/toshiba_rbtx4927/ core-$(CONFIG_TOSHIBA_RBTX4927) += arch/mips/tx4927/common/ load-$(CONFIG_TOSHIBA_RBTX4927) += 0xffffffff80020000 +# +# Toshiba RBTX4938 board +# +core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/tx4938/toshiba_rbtx4938/ +core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/tx4938/common/ +load-$(CONFIG_TOSHIBA_RBTX4938) += 0xffffffff80100000 + cflags-y += -Iinclude/asm-mips/mach-generic drivers-$(CONFIG_PCI) += arch/mips/pci/ @@ -701,10 +790,29 @@ ifdef CONFIG_BOOT_ELF64 all: $(vmlinux-64) endif +ifdef CONFIG_MIPS_ATLAS +all: vmlinux.srec +endif + +ifdef CONFIG_MIPS_MALTA +all: vmlinux.srec +endif + +ifdef CONFIG_MIPS_SEAD +all: vmlinux.srec +endif + +ifdef CONFIG_QEMU +all: vmlinux.bin +endif + ifdef CONFIG_SNI_RM200_PCI all: vmlinux.ecoff endif +vmlinux.bin: $(vmlinux-32) + +@$(call makeboot,$@) + vmlinux.ecoff vmlinux.rm200: $(vmlinux-32) +@$(call makeboot,$@) @@ -720,7 +828,6 @@ archclean: @$(MAKE) $(clean)=arch/mips/boot @$(MAKE) $(clean)=arch/mips/lasat - CLEAN_FILES += vmlinux.32 \ vmlinux.64 \ vmlinux.ecoff |