summaryrefslogtreecommitdiffstats
path: root/arch/mips/alchemy/devboards/db1550.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/alchemy/devboards/db1550.c')
-rw-r--r--arch/mips/alchemy/devboards/db1550.c18
1 files changed, 9 insertions, 9 deletions
diff --git a/arch/mips/alchemy/devboards/db1550.c b/arch/mips/alchemy/devboards/db1550.c
index 5a9ae609542..016cddacd7e 100644
--- a/arch/mips/alchemy/devboards/db1550.c
+++ b/arch/mips/alchemy/devboards/db1550.c
@@ -67,7 +67,7 @@ int __init db1550_board_setup(void)
bcsr_init(PB1550_BCSR_PHYS_ADDR,
PB1550_BCSR_PHYS_ADDR + PB1550_BCSR_HEXLED_OFS);
- pr_info("Alchemy/AMD %s Board, CPLD Rev %d Board-ID %d " \
+ pr_info("Alchemy/AMD %s Board, CPLD Rev %d Board-ID %d " \
"Daughtercard ID %d\n", get_system_type(),
(whoami >> 4) & 0xf, (whoami >> 8) & 0xf, whoami & 0xf);
@@ -80,7 +80,7 @@ int __init db1550_board_setup(void)
static struct mtd_partition db1550_spiflash_parts[] = {
{
.name = "spi_flash",
- .offset = 0,
+ .offset = 0,
.size = MTDPART_SIZ_FULL,
},
};
@@ -151,12 +151,12 @@ static int au1550_nand_device_ready(struct mtd_info *mtd)
static struct mtd_partition db1550_nand_parts[] = {
{
.name = "NAND FS 0",
- .offset = 0,
+ .offset = 0,
.size = 8 * 1024 * 1024,
},
{
.name = "NAND FS 1",
- .offset = MTDPART_OFS_APPEND,
+ .offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL
},
};
@@ -495,10 +495,10 @@ static void __init db1550_devices(void)
{
alchemy_gpio_direction_output(203, 0); /* red led on */
- irq_set_irq_type(AU1550_GPIO0_INT, IRQ_TYPE_EDGE_BOTH); /* CD0# */
- irq_set_irq_type(AU1550_GPIO1_INT, IRQ_TYPE_EDGE_BOTH); /* CD1# */
- irq_set_irq_type(AU1550_GPIO3_INT, IRQ_TYPE_LEVEL_LOW); /* CARD0# */
- irq_set_irq_type(AU1550_GPIO5_INT, IRQ_TYPE_LEVEL_LOW); /* CARD1# */
+ irq_set_irq_type(AU1550_GPIO0_INT, IRQ_TYPE_EDGE_BOTH); /* CD0# */
+ irq_set_irq_type(AU1550_GPIO1_INT, IRQ_TYPE_EDGE_BOTH); /* CD1# */
+ irq_set_irq_type(AU1550_GPIO3_INT, IRQ_TYPE_LEVEL_LOW); /* CARD0# */
+ irq_set_irq_type(AU1550_GPIO5_INT, IRQ_TYPE_LEVEL_LOW); /* CARD1# */
irq_set_irq_type(AU1550_GPIO21_INT, IRQ_TYPE_LEVEL_LOW); /* STSCHG0# */
irq_set_irq_type(AU1550_GPIO22_INT, IRQ_TYPE_LEVEL_LOW); /* STSCHG1# */
@@ -539,7 +539,7 @@ static void __init pb1550_devices(void)
/* Pb1550, like all others, also has statuschange irqs; however they're
* wired up on one of the Au1550's shared GPIO201_205 line, which also
- * services the PCMCIA card interrupts. So we ignore statuschange and
+ * services the PCMCIA card interrupts. So we ignore statuschange and
* use the GPIO201_205 exclusively for card interrupts, since a) pcmcia
* drivers are used to shared irqs and b) statuschange isn't really use-
* ful anyway.