summaryrefslogtreecommitdiffstats
path: root/arch/mips/alchemy/mtx-1/board_setup.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/alchemy/mtx-1/board_setup.c')
-rw-r--r--arch/mips/alchemy/mtx-1/board_setup.c98
1 files changed, 98 insertions, 0 deletions
diff --git a/arch/mips/alchemy/mtx-1/board_setup.c b/arch/mips/alchemy/mtx-1/board_setup.c
new file mode 100644
index 00000000000..3f8079186cf
--- /dev/null
+++ b/arch/mips/alchemy/mtx-1/board_setup.c
@@ -0,0 +1,98 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ * 4G Systems MTX-1 board setup.
+ *
+ * Copyright 2003, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
+ * Bruno Randolf <bruno.randolf@4g-systems.biz>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+
+#include <asm/mach-au1x00/au1000.h>
+
+extern int (*board_pci_idsel)(unsigned int devsel, int assert);
+int mtx1_pci_idsel(unsigned int devsel, int assert);
+
+void board_reset(void)
+{
+ /* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
+ au_writel(0x00000000, 0xAE00001C);
+}
+
+void __init board_setup(void)
+{
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+ /* Enable USB power switch */
+ au_writel(au_readl(GPIO2_DIR) | 0x10, GPIO2_DIR);
+ au_writel(0x100000, GPIO2_OUTPUT);
+#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
+
+#ifdef CONFIG_PCI
+#if defined(__MIPSEB__)
+ au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG);
+#else
+ au_writel(0xf, Au1500_PCI_CFG);
+#endif
+#endif
+
+ /* Initialize sys_pinfunc */
+ au_writel(SYS_PF_NI2, SYS_PINFUNC);
+
+ /* Initialize GPIO */
+ au_writel(0xFFFFFFFF, SYS_TRIOUTCLR);
+ au_writel(0x00000001, SYS_OUTPUTCLR); /* set M66EN (PCI 66MHz) to OFF */
+ au_writel(0x00000008, SYS_OUTPUTSET); /* set PCI CLKRUN# to OFF */
+ au_writel(0x00000002, SYS_OUTPUTSET); /* set EXT_IO3 ON */
+ au_writel(0x00000020, SYS_OUTPUTCLR); /* set eth PHY TX_ER to OFF */
+
+ /* Enable LED and set it to green */
+ au_writel(au_readl(GPIO2_DIR) | 0x1800, GPIO2_DIR);
+ au_writel(0x18000800, GPIO2_OUTPUT);
+
+ board_pci_idsel = mtx1_pci_idsel;
+
+ printk(KERN_INFO "4G Systems MTX-1 Board\n");
+}
+
+int
+mtx1_pci_idsel(unsigned int devsel, int assert)
+{
+#define MTX_IDSEL_ONLY_0_AND_3 0
+#if MTX_IDSEL_ONLY_0_AND_3
+ if (devsel != 0 && devsel != 3) {
+ printk(KERN_ERR "*** not 0 or 3\n");
+ return 0;
+ }
+#endif
+
+ if (assert && devsel != 0)
+ /* Suppress signal to Cardbus */
+ au_writel(0x00000002, SYS_OUTPUTCLR); /* set EXT_IO3 OFF */
+ else
+ au_writel(0x00000002, SYS_OUTPUTSET); /* set EXT_IO3 ON */
+ au_sync_udelay(1);
+ return 1;
+}
+