diff options
Diffstat (limited to 'arch/mips/alchemy/mtx-1/board_setup.c')
| -rw-r--r-- | arch/mips/alchemy/mtx-1/board_setup.c | 26 |
1 files changed, 11 insertions, 15 deletions
diff --git a/arch/mips/alchemy/mtx-1/board_setup.c b/arch/mips/alchemy/mtx-1/board_setup.c index a9f0336e1f1..6398fa95905 100644 --- a/arch/mips/alchemy/mtx-1/board_setup.c +++ b/arch/mips/alchemy/mtx-1/board_setup.c @@ -60,15 +60,15 @@ static void mtx1_reset(char *c) static void mtx1_power_off(void) { - printk(KERN_ALERT "It's now safe to remove power\n"); while (1) - asm volatile (".set mips3 ; wait ; .set mips1"); + asm volatile ( + " .set mips32 \n" + " wait \n" + " .set mips0 \n"); } void __init board_setup(void) { - alchemy_gpio2_enable(); - #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) /* Enable USB power switch */ alchemy_gpio_direction_output(204, 0); @@ -107,21 +107,17 @@ void __init board_setup(void) int mtx1_pci_idsel(unsigned int devsel, int assert) { -#define MTX_IDSEL_ONLY_0_AND_3 0 -#if MTX_IDSEL_ONLY_0_AND_3 - if (devsel != 0 && devsel != 3) { - printk(KERN_ERR "*** not 0 or 3\n"); - return 0; - } -#endif - + /* This function is only necessary to support a proprietary Cardbus + * adapter on the mtx-1 "singleboard" variant. It triggers a custom + * logic chip connected to EXT_IO3 (GPIO1) to suppress IDSEL signals. + */ if (assert && devsel != 0) /* Suppress signal to Cardbus */ - gpio_set_value(1, 0); /* set EXT_IO3 OFF */ + alchemy_gpio_set_value(1, 0); /* set EXT_IO3 OFF */ else - gpio_set_value(1, 1); /* set EXT_IO3 ON */ + alchemy_gpio_set_value(1, 1); /* set EXT_IO3 ON */ - au_sync_udelay(1); + udelay(1); return 1; } |