diff options
Diffstat (limited to 'arch/mips/au1000/pb1200/board_setup.c')
| -rw-r--r-- | arch/mips/au1000/pb1200/board_setup.c | 193 |
1 files changed, 193 insertions, 0 deletions
diff --git a/arch/mips/au1000/pb1200/board_setup.c b/arch/mips/au1000/pb1200/board_setup.c new file mode 100644 index 00000000000..a45b17538ac --- /dev/null +++ b/arch/mips/au1000/pb1200/board_setup.c @@ -0,0 +1,193 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * Alchemy Pb1200/Db1200 board setup. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include <linux/config.h> +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/ioport.h> +#include <linux/mm.h> +#include <linux/console.h> +#include <linux/mc146818rtc.h> +#include <linux/delay.h> + +#if defined(CONFIG_BLK_DEV_IDE_AU1XXX) +#include <linux/ide.h> +#endif + +#include <asm/cpu.h> +#include <asm/bootinfo.h> +#include <asm/irq.h> +#include <asm/mipsregs.h> +#include <asm/reboot.h> +#include <asm/pgtable.h> +#include <asm/mach-au1x00/au1000.h> +#include <asm/mach-au1x00/au1xxx_dbdma.h> + +#ifdef CONFIG_MIPS_PB1200 +#include <asm/mach-pb1x00/pb1200.h> +#endif + +#ifdef CONFIG_MIPS_DB1200 +#include <asm/mach-db1x00/db1200.h> +#define PB1200_ETH_INT DB1200_ETH_INT +#define PB1200_IDE_INT DB1200_IDE_INT +#endif + +extern void _board_init_irq(void); +extern void (*board_init_irq)(void); + +void board_reset (void) +{ + bcsr->resets = 0; + bcsr->system = 0; +} + +void __init board_setup(void) +{ + char *argptr = NULL; + u32 pin_func; + +#if 0 + /* Enable PSC1 SYNC for AC97. Normaly done in audio driver, + * but it is board specific code, so put it here. + */ + pin_func = au_readl(SYS_PINFUNC); + au_sync(); + pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1; + au_writel(pin_func, SYS_PINFUNC); + + au_writel(0, (u32)bcsr|0x10); /* turn off pcmcia power */ + au_sync(); +#endif + +#if defined(CONFIG_I2C_AU1550) + { + u32 freq0, clksrc; + + /* Select SMBUS in CPLD */ + bcsr->resets &= ~(BCSR_RESETS_PCS0MUX); + + pin_func = au_readl(SYS_PINFUNC); + au_sync(); + pin_func &= ~(3<<17 | 1<<4); + /* Set GPIOs correctly */ + pin_func |= 2<<17; + au_writel(pin_func, SYS_PINFUNC); + au_sync(); + + /* The i2c driver depends on 50Mhz clock */ + freq0 = au_readl(SYS_FREQCTRL0); + au_sync(); + freq0 &= ~(SYS_FC_FRDIV1_MASK | SYS_FC_FS1 | SYS_FC_FE1); + freq0 |= (3<<SYS_FC_FRDIV1_BIT); + /* 396Mhz / (3+1)*2 == 49.5Mhz */ + au_writel(freq0, SYS_FREQCTRL0); + au_sync(); + freq0 |= SYS_FC_FE1; + au_writel(freq0, SYS_FREQCTRL0); + au_sync(); + + clksrc = au_readl(SYS_CLKSRC); + au_sync(); + clksrc &= ~0x01f00000; + /* bit 22 is EXTCLK0 for PSC0 */ + clksrc |= (0x3 << 22); + au_writel(clksrc, SYS_CLKSRC); + au_sync(); + } +#endif + +#ifdef CONFIG_FB_AU1200 + argptr = prom_getcmdline(); +#ifdef CONFIG_MIPS_PB1200 + strcat(argptr, " video=au1200fb:panel:bs"); +#endif +#ifdef CONFIG_MIPS_DB1200 + strcat(argptr, " video=au1200fb:panel:bs"); +#endif +#endif + + /* The Pb1200 development board uses external MUX for PSC0 to + support SMB/SPI. bcsr->resets bit 12: 0=SMB 1=SPI + */ +#if defined(CONFIG_AU1XXX_PSC_SPI) && defined(CONFIG_I2C_AU1550) + #error I2C and SPI are mutually exclusive. Both are physically connected to PSC0.\ + Refer to Pb1200/Db1200 documentation. +#elif defined( CONFIG_AU1XXX_PSC_SPI ) + bcsr->resets |= BCSR_RESETS_PCS0MUX; + /*Hard Coding Value to enable Temp Sensors [bit 14] Value for SOC Au1200. Pls refer documentation*/ + bcsr->resets =0x900f; +#elif defined( CONFIG_I2C_AU1550 ) + bcsr->resets &= (~BCSR_RESETS_PCS0MUX); +#endif + au_sync(); + +#ifdef CONFIG_MIPS_PB1200 + printk("AMD Alchemy Pb1200 Board\n"); +#endif +#ifdef CONFIG_MIPS_DB1200 + printk("AMD Alchemy Db1200 Board\n"); +#endif + + /* Setup Pb1200 External Interrupt Controller */ + { + extern void (*board_init_irq)(void); + extern void _board_init_irq(void); + board_init_irq = _board_init_irq; + } +} + +int +board_au1200fb_panel (void) +{ + BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR; + int p; + + p = bcsr->switches; + p >>= 8; + p &= 0x0F; + return p; +} + +int +board_au1200fb_panel_init (void) +{ + /* Apply power */ + BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR; + bcsr->board |= (BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL); + /*printk("board_au1200fb_panel_init()\n"); */ + return 0; +} + +int +board_au1200fb_panel_shutdown (void) +{ + /* Remove power */ + BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR; + bcsr->board &= ~(BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL); + /*printk("board_au1200fb_panel_shutdown()\n"); */ + return 0; +} + |