diff options
Diffstat (limited to 'arch/mips/include/asm/octeon/cvmx-mdio.h')
| -rw-r--r-- | arch/mips/include/asm/octeon/cvmx-mdio.h | 506 |
1 files changed, 506 insertions, 0 deletions
diff --git a/arch/mips/include/asm/octeon/cvmx-mdio.h b/arch/mips/include/asm/octeon/cvmx-mdio.h new file mode 100644 index 00000000000..d88ab8d8e37 --- /dev/null +++ b/arch/mips/include/asm/octeon/cvmx-mdio.h @@ -0,0 +1,506 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +/* + * + * Interface to the SMI/MDIO hardware, including support for both IEEE 802.3 + * clause 22 and clause 45 operations. + * + */ + +#ifndef __CVMX_MIO_H__ +#define __CVMX_MIO_H__ + +#include "cvmx-smix-defs.h" + +/** + * PHY register 0 from the 802.3 spec + */ +#define CVMX_MDIO_PHY_REG_CONTROL 0 +typedef union { + uint16_t u16; + struct { + uint16_t reset:1; + uint16_t loopback:1; + uint16_t speed_lsb:1; + uint16_t autoneg_enable:1; + uint16_t power_down:1; + uint16_t isolate:1; + uint16_t restart_autoneg:1; + uint16_t duplex:1; + uint16_t collision_test:1; + uint16_t speed_msb:1; + uint16_t unidirectional_enable:1; + uint16_t reserved_0_4:5; + } s; +} cvmx_mdio_phy_reg_control_t; + +/** + * PHY register 1 from the 802.3 spec + */ +#define CVMX_MDIO_PHY_REG_STATUS 1 +typedef union { + uint16_t u16; + struct { + uint16_t capable_100base_t4:1; + uint16_t capable_100base_x_full:1; + uint16_t capable_100base_x_half:1; + uint16_t capable_10_full:1; + uint16_t capable_10_half:1; + uint16_t capable_100base_t2_full:1; + uint16_t capable_100base_t2_half:1; + uint16_t capable_extended_status:1; + uint16_t capable_unidirectional:1; + uint16_t capable_mf_preamble_suppression:1; + uint16_t autoneg_complete:1; + uint16_t remote_fault:1; + uint16_t capable_autoneg:1; + uint16_t link_status:1; + uint16_t jabber_detect:1; + uint16_t capable_extended_registers:1; + + } s; +} cvmx_mdio_phy_reg_status_t; + +/** + * PHY register 2 from the 802.3 spec + */ +#define CVMX_MDIO_PHY_REG_ID1 2 +typedef union { + uint16_t u16; + struct { + uint16_t oui_bits_3_18; + } s; +} cvmx_mdio_phy_reg_id1_t; + +/** + * PHY register 3 from the 802.3 spec + */ +#define CVMX_MDIO_PHY_REG_ID2 3 +typedef union { + uint16_t u16; + struct { + uint16_t oui_bits_19_24:6; + uint16_t model:6; + uint16_t revision:4; + } s; +} cvmx_mdio_phy_reg_id2_t; + +/** + * PHY register 4 from the 802.3 spec + */ +#define CVMX_MDIO_PHY_REG_AUTONEG_ADVER 4 +typedef union { + uint16_t u16; + struct { + uint16_t next_page:1; + uint16_t reserved_14:1; + uint16_t remote_fault:1; + uint16_t reserved_12:1; + uint16_t asymmetric_pause:1; + uint16_t pause:1; + uint16_t advert_100base_t4:1; + uint16_t advert_100base_tx_full:1; + uint16_t advert_100base_tx_half:1; + uint16_t advert_10base_tx_full:1; + uint16_t advert_10base_tx_half:1; + uint16_t selector:5; + } s; +} cvmx_mdio_phy_reg_autoneg_adver_t; + +/** + * PHY register 5 from the 802.3 spec + */ +#define CVMX_MDIO_PHY_REG_LINK_PARTNER_ABILITY 5 +typedef union { + uint16_t u16; + struct { + uint16_t next_page:1; + uint16_t ack:1; + uint16_t remote_fault:1; + uint16_t reserved_12:1; + uint16_t asymmetric_pause:1; + uint16_t pause:1; + uint16_t advert_100base_t4:1; + uint16_t advert_100base_tx_full:1; + uint16_t advert_100base_tx_half:1; + uint16_t advert_10base_tx_full:1; + uint16_t advert_10base_tx_half:1; + uint16_t selector:5; + } s; +} cvmx_mdio_phy_reg_link_partner_ability_t; + +/** + * PHY register 6 from the 802.3 spec + */ +#define CVMX_MDIO_PHY_REG_AUTONEG_EXPANSION 6 +typedef union { + uint16_t u16; + struct { + uint16_t reserved_5_15:11; + uint16_t parallel_detection_fault:1; + uint16_t link_partner_next_page_capable:1; + uint16_t local_next_page_capable:1; + uint16_t page_received:1; + uint16_t link_partner_autoneg_capable:1; + + } s; +} cvmx_mdio_phy_reg_autoneg_expansion_t; + +/** + * PHY register 9 from the 802.3 spec + */ +#define CVMX_MDIO_PHY_REG_CONTROL_1000 9 +typedef union { + uint16_t u16; + struct { + uint16_t test_mode:3; + uint16_t manual_master_slave:1; + uint16_t master:1; + uint16_t port_type:1; + uint16_t advert_1000base_t_full:1; + uint16_t advert_1000base_t_half:1; + uint16_t reserved_0_7:8; + } s; +} cvmx_mdio_phy_reg_control_1000_t; + +/** + * PHY register 10 from the 802.3 spec + */ +#define CVMX_MDIO_PHY_REG_STATUS_1000 10 +typedef union { + uint16_t u16; + struct { + uint16_t master_slave_fault:1; + uint16_t is_master:1; + uint16_t local_receiver_ok:1; + uint16_t remote_receiver_ok:1; + uint16_t remote_capable_1000base_t_full:1; + uint16_t remote_capable_1000base_t_half:1; + uint16_t reserved_8_9:2; + uint16_t idle_error_count:8; + } s; +} cvmx_mdio_phy_reg_status_1000_t; + +/** + * PHY register 15 from the 802.3 spec + */ +#define CVMX_MDIO_PHY_REG_EXTENDED_STATUS 15 +typedef union { + uint16_t u16; + struct { + uint16_t capable_1000base_x_full:1; + uint16_t capable_1000base_x_half:1; + uint16_t capable_1000base_t_full:1; + uint16_t capable_1000base_t_half:1; + uint16_t reserved_0_11:12; + } s; +} cvmx_mdio_phy_reg_extended_status_t; + +/** + * PHY register 13 from the 802.3 spec + */ +#define CVMX_MDIO_PHY_REG_MMD_CONTROL 13 +typedef union { + uint16_t u16; + struct { + uint16_t function:2; + uint16_t reserved_5_13:9; + uint16_t devad:5; + } s; +} cvmx_mdio_phy_reg_mmd_control_t; + +/** + * PHY register 14 from the 802.3 spec + */ +#define CVMX_MDIO_PHY_REG_MMD_ADDRESS_DATA 14 +typedef union { + uint16_t u16; + struct { + uint16_t address_data:16; + } s; +} cvmx_mdio_phy_reg_mmd_address_data_t; + +/* Operating request encodings. */ +#define MDIO_CLAUSE_22_WRITE 0 +#define MDIO_CLAUSE_22_READ 1 + +#define MDIO_CLAUSE_45_ADDRESS 0 +#define MDIO_CLAUSE_45_WRITE 1 +#define MDIO_CLAUSE_45_READ_INC 2 +#define MDIO_CLAUSE_45_READ 3 + +/* MMD identifiers, mostly for accessing devices within XENPAK modules. */ +#define CVMX_MMD_DEVICE_PMA_PMD 1 +#define CVMX_MMD_DEVICE_WIS 2 +#define CVMX_MMD_DEVICE_PCS 3 +#define CVMX_MMD_DEVICE_PHY_XS 4 +#define CVMX_MMD_DEVICE_DTS_XS 5 +#define CVMX_MMD_DEVICE_TC 6 +#define CVMX_MMD_DEVICE_CL22_EXT 29 +#define CVMX_MMD_DEVICE_VENDOR_1 30 +#define CVMX_MMD_DEVICE_VENDOR_2 31 + +/* Helper function to put MDIO interface into clause 45 mode */ +static inline void __cvmx_mdio_set_clause45_mode(int bus_id) +{ + union cvmx_smix_clk smi_clk; + /* Put bus into clause 45 mode */ + smi_clk.u64 = cvmx_read_csr(CVMX_SMIX_CLK(bus_id)); + smi_clk.s.mode = 1; + smi_clk.s.preamble = 1; + cvmx_write_csr(CVMX_SMIX_CLK(bus_id), smi_clk.u64); +} + +/* Helper function to put MDIO interface into clause 22 mode */ +static inline void __cvmx_mdio_set_clause22_mode(int bus_id) +{ + union cvmx_smix_clk smi_clk; + /* Put bus into clause 22 mode */ + smi_clk.u64 = cvmx_read_csr(CVMX_SMIX_CLK(bus_id)); + smi_clk.s.mode = 0; + cvmx_write_csr(CVMX_SMIX_CLK(bus_id), smi_clk.u64); +} + +/** + * Perform an MII read. This function is used to read PHY + * registers controlling auto negotiation. + * + * @bus_id: MDIO bus number. Zero on most chips, but some chips (ex CN56XX) + * support multiple busses. + * @phy_id: The MII phy id + * @location: Register location to read + * + * Returns Result from the read or -1 on failure + */ +static inline int cvmx_mdio_read(int bus_id, int phy_id, int location) +{ + union cvmx_smix_cmd smi_cmd; + union cvmx_smix_rd_dat smi_rd; + int timeout = 1000; + + if (octeon_has_feature(OCTEON_FEATURE_MDIO_CLAUSE_45)) + __cvmx_mdio_set_clause22_mode(bus_id); + + smi_cmd.u64 = 0; + smi_cmd.s.phy_op = MDIO_CLAUSE_22_READ; + smi_cmd.s.phy_adr = phy_id; + smi_cmd.s.reg_adr = location; + cvmx_write_csr(CVMX_SMIX_CMD(bus_id), smi_cmd.u64); + + do { + cvmx_wait(1000); + smi_rd.u64 = cvmx_read_csr(CVMX_SMIX_RD_DAT(bus_id)); + } while (smi_rd.s.pending && timeout--); + + if (smi_rd.s.val) + return smi_rd.s.dat; + else + return -1; +} + +/** + * Perform an MII write. This function is used to write PHY + * registers controlling auto negotiation. + * + * @bus_id: MDIO bus number. Zero on most chips, but some chips (ex CN56XX) + * support multiple busses. + * @phy_id: The MII phy id + * @location: Register location to write + * @val: Value to write + * + * Returns -1 on error + * 0 on success + */ +static inline int cvmx_mdio_write(int bus_id, int phy_id, int location, int val) +{ + union cvmx_smix_cmd smi_cmd; + union cvmx_smix_wr_dat smi_wr; + int timeout = 1000; + + if (octeon_has_feature(OCTEON_FEATURE_MDIO_CLAUSE_45)) + __cvmx_mdio_set_clause22_mode(bus_id); + + smi_wr.u64 = 0; + smi_wr.s.dat = val; + cvmx_write_csr(CVMX_SMIX_WR_DAT(bus_id), smi_wr.u64); + + smi_cmd.u64 = 0; + smi_cmd.s.phy_op = MDIO_CLAUSE_22_WRITE; + smi_cmd.s.phy_adr = phy_id; + smi_cmd.s.reg_adr = location; + cvmx_write_csr(CVMX_SMIX_CMD(bus_id), smi_cmd.u64); + + do { + cvmx_wait(1000); + smi_wr.u64 = cvmx_read_csr(CVMX_SMIX_WR_DAT(bus_id)); + } while (smi_wr.s.pending && --timeout); + if (timeout <= 0) + return -1; + + return 0; +} + +/** + * Perform an IEEE 802.3 clause 45 MII read. This function is used to + * read PHY registers controlling auto negotiation. + * + * @bus_id: MDIO bus number. Zero on most chips, but some chips (ex CN56XX) + * support multiple busses. + * @phy_id: The MII phy id + * @device: MDIO Managable Device (MMD) id + * @location: Register location to read + * + * Returns Result from the read or -1 on failure + */ + +static inline int cvmx_mdio_45_read(int bus_id, int phy_id, int device, + int location) +{ + union cvmx_smix_cmd smi_cmd; + union cvmx_smix_rd_dat smi_rd; + union cvmx_smix_wr_dat smi_wr; + int timeout = 1000; + + if (!octeon_has_feature(OCTEON_FEATURE_MDIO_CLAUSE_45)) + return -1; + + __cvmx_mdio_set_clause45_mode(bus_id); + + smi_wr.u64 = 0; + smi_wr.s.dat = location; + cvmx_write_csr(CVMX_SMIX_WR_DAT(bus_id), smi_wr.u64); + + smi_cmd.u64 = 0; + smi_cmd.s.phy_op = MDIO_CLAUSE_45_ADDRESS; + smi_cmd.s.phy_adr = phy_id; + smi_cmd.s.reg_adr = device; + cvmx_write_csr(CVMX_SMIX_CMD(bus_id), smi_cmd.u64); + + do { + cvmx_wait(1000); + smi_wr.u64 = cvmx_read_csr(CVMX_SMIX_WR_DAT(bus_id)); + } while (smi_wr.s.pending && --timeout); + if (timeout <= 0) { + cvmx_dprintf("cvmx_mdio_45_read: bus_id %d phy_id %2d " + "device %2d register %2d TIME OUT(address)\n", + bus_id, phy_id, device, location); + return -1; + } + + smi_cmd.u64 = 0; + smi_cmd.s.phy_op = MDIO_CLAUSE_45_READ; + smi_cmd.s.phy_adr = phy_id; + smi_cmd.s.reg_adr = device; + cvmx_write_csr(CVMX_SMIX_CMD(bus_id), smi_cmd.u64); + + do { + cvmx_wait(1000); + smi_rd.u64 = cvmx_read_csr(CVMX_SMIX_RD_DAT(bus_id)); + } while (smi_rd.s.pending && --timeout); + + if (timeout <= 0) { + cvmx_dprintf("cvmx_mdio_45_read: bus_id %d phy_id %2d " + "device %2d register %2d TIME OUT(data)\n", + bus_id, phy_id, device, location); + return -1; + } + + if (smi_rd.s.val) + return smi_rd.s.dat; + else { + cvmx_dprintf("cvmx_mdio_45_read: bus_id %d phy_id %2d " + "device %2d register %2d INVALID READ\n", + bus_id, phy_id, device, location); + return -1; + } +} + +/** + * Perform an IEEE 802.3 clause 45 MII write. This function is used to + * write PHY registers controlling auto negotiation. + * + * @bus_id: MDIO bus number. Zero on most chips, but some chips (ex CN56XX) + * support multiple busses. + * @phy_id: The MII phy id + * @device: MDIO Managable Device (MMD) id + * @location: Register location to write + * @val: Value to write + * + * Returns -1 on error + * 0 on success + */ +static inline int cvmx_mdio_45_write(int bus_id, int phy_id, int device, + int location, int val) +{ + union cvmx_smix_cmd smi_cmd; + union cvmx_smix_wr_dat smi_wr; + int timeout = 1000; + + if (!octeon_has_feature(OCTEON_FEATURE_MDIO_CLAUSE_45)) + return -1; + + __cvmx_mdio_set_clause45_mode(bus_id); + + smi_wr.u64 = 0; + smi_wr.s.dat = location; + cvmx_write_csr(CVMX_SMIX_WR_DAT(bus_id), smi_wr.u64); + + smi_cmd.u64 = 0; + smi_cmd.s.phy_op = MDIO_CLAUSE_45_ADDRESS; + smi_cmd.s.phy_adr = phy_id; + smi_cmd.s.reg_adr = device; + cvmx_write_csr(CVMX_SMIX_CMD(bus_id), smi_cmd.u64); + + do { + cvmx_wait(1000); + smi_wr.u64 = cvmx_read_csr(CVMX_SMIX_WR_DAT(bus_id)); + } while (smi_wr.s.pending && --timeout); + if (timeout <= 0) + return -1; + + smi_wr.u64 = 0; + smi_wr.s.dat = val; + cvmx_write_csr(CVMX_SMIX_WR_DAT(bus_id), smi_wr.u64); + + smi_cmd.u64 = 0; + smi_cmd.s.phy_op = MDIO_CLAUSE_45_WRITE; + smi_cmd.s.phy_adr = phy_id; + smi_cmd.s.reg_adr = device; + cvmx_write_csr(CVMX_SMIX_CMD(bus_id), smi_cmd.u64); + + do { + cvmx_wait(1000); + smi_wr.u64 = cvmx_read_csr(CVMX_SMIX_WR_DAT(bus_id)); + } while (smi_wr.s.pending && --timeout); + if (timeout <= 0) + return -1; + + return 0; +} + +#endif |