summaryrefslogtreecommitdiffstats
path: root/arch/mips/include/asm/stackframe.h
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/include/asm/stackframe.h')
-rw-r--r--arch/mips/include/asm/stackframe.h196
1 files changed, 1 insertions, 195 deletions
diff --git a/arch/mips/include/asm/stackframe.h b/arch/mips/include/asm/stackframe.h
index d301e108d5b..b188c797565 100644
--- a/arch/mips/include/asm/stackframe.h
+++ b/arch/mips/include/asm/stackframe.h
@@ -19,22 +19,12 @@
#include <asm/asm-offsets.h>
#include <asm/thread_info.h>
-/*
- * For SMTC kernel, global IE should be left set, and interrupts
- * controlled exclusively via IXMT.
- */
-#ifdef CONFIG_MIPS_MT_SMTC
-#define STATMASK 0x1e
-#elif defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
+#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
#define STATMASK 0x3f
#else
#define STATMASK 0x1f
#endif
-#ifdef CONFIG_MIPS_MT_SMTC
-#include <asm/mipsmtregs.h>
-#endif /* CONFIG_MIPS_MT_SMTC */
-
.macro SAVE_AT
.set push
.set noat
@@ -186,16 +176,6 @@
mfc0 v1, CP0_STATUS
LONG_S $2, PT_R2(sp)
LONG_S v1, PT_STATUS(sp)
-#ifdef CONFIG_MIPS_MT_SMTC
- /*
- * Ideally, these instructions would be shuffled in
- * to cover the pipeline delay.
- */
- .set mips32
- mfc0 k0, CP0_TCSTATUS
- .set mips0
- LONG_S k0, PT_TCSTATUS(sp)
-#endif /* CONFIG_MIPS_MT_SMTC */
LONG_S $4, PT_R4(sp)
mfc0 v1, CP0_CAUSE
LONG_S $5, PT_R5(sp)
@@ -321,36 +301,6 @@
.set push
.set reorder
.set noat
-#ifdef CONFIG_MIPS_MT_SMTC
- .set mips32r2
- /*
- * We need to make sure the read-modify-write
- * of Status below isn't perturbed by an interrupt
- * or cross-TC access, so we need to do at least a DMT,
- * protected by an interrupt-inhibit. But setting IXMT
- * also creates a few-cycle window where an IPI could
- * be queued and not be detected before potentially
- * returning to a WAIT or user-mode loop. It must be
- * replayed.
- *
- * We're in the middle of a context switch, and
- * we can't dispatch it directly without trashing
- * some registers, so we'll try to detect this unlikely
- * case and program a software interrupt in the VPE,
- * as would be done for a cross-VPE IPI. To accommodate
- * the handling of that case, we're doing a DVPE instead
- * of just a DMT here to protect against other threads.
- * This is a lot of cruft to cover a tiny window.
- * If you can find a better design, implement it!
- *
- */
- mfc0 v0, CP0_TCSTATUS
- ori v0, TCSTATUS_IXMT
- mtc0 v0, CP0_TCSTATUS
- _ehb
- DVPE 5 # dvpe a1
- jal mips_ihb
-#endif /* CONFIG_MIPS_MT_SMTC */
mfc0 a0, CP0_STATUS
ori a0, STATMASK
xori a0, STATMASK
@@ -362,59 +312,6 @@
and v0, v1
or v0, a0
mtc0 v0, CP0_STATUS
-#ifdef CONFIG_MIPS_MT_SMTC
-/*
- * Only after EXL/ERL have been restored to status can we
- * restore TCStatus.IXMT.
- */
- LONG_L v1, PT_TCSTATUS(sp)
- _ehb
- mfc0 a0, CP0_TCSTATUS
- andi v1, TCSTATUS_IXMT
- bnez v1, 0f
-
-/*
- * We'd like to detect any IPIs queued in the tiny window
- * above and request an software interrupt to service them
- * when we ERET.
- *
- * Computing the offset into the IPIQ array of the executing
- * TC's IPI queue in-line would be tedious. We use part of
- * the TCContext register to hold 16 bits of offset that we
- * can add in-line to find the queue head.
- */
- mfc0 v0, CP0_TCCONTEXT
- la a2, IPIQ
- srl v0, v0, 16
- addu a2, a2, v0
- LONG_L v0, 0(a2)
- beqz v0, 0f
-/*
- * If we have a queue, provoke dispatch within the VPE by setting C_SW1
- */
- mfc0 v0, CP0_CAUSE
- ori v0, v0, C_SW1
- mtc0 v0, CP0_CAUSE
-0:
- /*
- * This test should really never branch but
- * let's be prudent here. Having atomized
- * the shared register modifications, we can
- * now EVPE, and must do so before interrupts
- * are potentially re-enabled.
- */
- andi a1, a1, MVPCONTROL_EVP
- beqz a1, 1f
- evpe
-1:
- /* We know that TCStatua.IXMT should be set from above */
- xori a0, a0, TCSTATUS_IXMT
- or a0, a0, v1
- mtc0 a0, CP0_TCSTATUS
- _ehb
-
- .set mips0
-#endif /* CONFIG_MIPS_MT_SMTC */
LONG_L v1, PT_EPC(sp)
MTC0 v1, CP0_EPC
LONG_L $31, PT_R31(sp)
@@ -467,33 +364,11 @@
* Set cp0 enable bit as sign that we're running on the kernel stack
*/
.macro CLI
-#if !defined(CONFIG_MIPS_MT_SMTC)
mfc0 t0, CP0_STATUS
li t1, ST0_CU0 | STATMASK
or t0, t1
xori t0, STATMASK
mtc0 t0, CP0_STATUS
-#else /* CONFIG_MIPS_MT_SMTC */
- /*
- * For SMTC, we need to set privilege
- * and disable interrupts only for the
- * current TC, using the TCStatus register.
- */
- mfc0 t0, CP0_TCSTATUS
- /* Fortunately CU 0 is in the same place in both registers */
- /* Set TCU0, TMX, TKSU (for later inversion) and IXMT */
- li t1, ST0_CU0 | 0x08001c00
- or t0, t1
- /* Clear TKSU, leave IXMT */
- xori t0, 0x00001800
- mtc0 t0, CP0_TCSTATUS
- _ehb
- /* We need to leave the global IE bit set, but clear EXL...*/
- mfc0 t0, CP0_STATUS
- ori t0, ST0_EXL | ST0_ERL
- xori t0, ST0_EXL | ST0_ERL
- mtc0 t0, CP0_STATUS
-#endif /* CONFIG_MIPS_MT_SMTC */
irq_disable_hazard
.endm
@@ -502,35 +377,11 @@
* Set cp0 enable bit as sign that we're running on the kernel stack
*/
.macro STI
-#if !defined(CONFIG_MIPS_MT_SMTC)
mfc0 t0, CP0_STATUS
li t1, ST0_CU0 | STATMASK
or t0, t1
xori t0, STATMASK & ~1
mtc0 t0, CP0_STATUS
-#else /* CONFIG_MIPS_MT_SMTC */
- /*
- * For SMTC, we need to set privilege
- * and enable interrupts only for the
- * current TC, using the TCStatus register.
- */
- _ehb
- mfc0 t0, CP0_TCSTATUS
- /* Fortunately CU 0 is in the same place in both registers */
- /* Set TCU0, TKSU (for later inversion) and IXMT */
- li t1, ST0_CU0 | 0x08001c00
- or t0, t1
- /* Clear TKSU *and* IXMT */
- xori t0, 0x00001c00
- mtc0 t0, CP0_TCSTATUS
- _ehb
- /* We need to leave the global IE bit set, but clear EXL...*/
- mfc0 t0, CP0_STATUS
- ori t0, ST0_EXL
- xori t0, ST0_EXL
- mtc0 t0, CP0_STATUS
- /* irq_enable_hazard below should expand to EHB for 24K/34K cpus */
-#endif /* CONFIG_MIPS_MT_SMTC */
irq_enable_hazard
.endm
@@ -540,32 +391,6 @@
* Set cp0 enable bit as sign that we're running on the kernel stack
*/
.macro KMODE
-#ifdef CONFIG_MIPS_MT_SMTC
- /*
- * This gets baroque in SMTC. We want to
- * protect the non-atomic clearing of EXL
- * with DMT/EMT, but we don't want to take
- * an interrupt while DMT is still in effect.
- */
-
- /* KMODE gets invoked from both reorder and noreorder code */
- .set push
- .set mips32r2
- .set noreorder
- mfc0 v0, CP0_TCSTATUS
- andi v1, v0, TCSTATUS_IXMT
- ori v0, TCSTATUS_IXMT
- mtc0 v0, CP0_TCSTATUS
- _ehb
- DMT 2 # dmt v0
- /*
- * We don't know a priori if ra is "live"
- */
- move t0, ra
- jal mips_ihb
- nop /* delay slot */
- move ra, t0
-#endif /* CONFIG_MIPS_MT_SMTC */
mfc0 t0, CP0_STATUS
li t1, ST0_CU0 | (STATMASK & ~1)
#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
@@ -576,25 +401,6 @@
or t0, t1
xori t0, STATMASK & ~1
mtc0 t0, CP0_STATUS
-#ifdef CONFIG_MIPS_MT_SMTC
- _ehb
- andi v0, v0, VPECONTROL_TE
- beqz v0, 2f
- nop /* delay slot */
- emt
-2:
- mfc0 v0, CP0_TCSTATUS
- /* Clear IXMT, then OR in previous value */
- ori v0, TCSTATUS_IXMT
- xori v0, TCSTATUS_IXMT
- or v0, v1, v0
- mtc0 v0, CP0_TCSTATUS
- /*
- * irq_disable_hazard below should expand to EHB
- * on 24K/34K CPUS
- */
- .set pop
-#endif /* CONFIG_MIPS_MT_SMTC */
irq_disable_hazard
.endm