diff options
Diffstat (limited to 'arch/mips/kernel')
| -rw-r--r-- | arch/mips/kernel/Makefile | 2 | ||||
| -rw-r--r-- | arch/mips/kernel/genex.S | 1 | ||||
| -rw-r--r-- | arch/mips/kernel/smp_mt.c | 366 | ||||
| -rw-r--r-- | arch/mips/kernel/traps.c | 14 | ||||
| -rw-r--r-- | arch/mips/kernel/vpe.c | 15 |
5 files changed, 391 insertions, 7 deletions
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index 0f527063a8a..4c09e1acafd 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -34,6 +34,8 @@ obj-$(CONFIG_CPU_R6000) += r6000_fpu.o r4k_switch.o obj-$(CONFIG_SMP) += smp.o +obj-$(CONFIG_MIPS_MT_SMP) += smp_mt.o + obj-$(CONFIG_MIPS_VPE_LOADER) += vpe.o obj-$(CONFIG_MIPS_VPE_APSP_API) += rtlx.o diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S index fd904d1e419..aa18a8b7b38 100644 --- a/arch/mips/kernel/genex.S +++ b/arch/mips/kernel/genex.S @@ -323,6 +323,7 @@ NESTED(nmi_handler, PT_SIZE, sp) BUILD_HANDLER mdmx mdmx sti silent /* #22 */ BUILD_HANDLER watch watch sti verbose /* #23 */ BUILD_HANDLER mcheck mcheck cli verbose /* #24 */ + BUILD_HANDLER mt mt sti verbose /* #25 */ BUILD_HANDLER dsp dsp sti silent /* #26 */ BUILD_HANDLER reserved reserved sti verbose /* others */ diff --git a/arch/mips/kernel/smp_mt.c b/arch/mips/kernel/smp_mt.c new file mode 100644 index 00000000000..d429544ba4b --- /dev/null +++ b/arch/mips/kernel/smp_mt.c @@ -0,0 +1,366 @@ +/* + * Copyright (C) 2004, 2005 MIPS Technologies, Inc. All rights reserved. + * + * Elizabeth Clarke (beth@mips.com) + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + */ +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/cpumask.h> +#include <linux/interrupt.h> +#include <linux/compiler.h> + +#include <asm/atomic.h> +#include <asm/cpu.h> +#include <asm/processor.h> +#include <asm/system.h> +#include <asm/hardirq.h> +#include <asm/mmu_context.h> +#include <asm/smp.h> +#include <asm/time.h> +#include <asm/mipsregs.h> +#include <asm/mipsmtregs.h> +#include <asm/cacheflush.h> +#include <asm/mips-boards/maltaint.h> + +#define MIPS_CPU_IPI_RESCHED_IRQ 0 +#define MIPS_CPU_IPI_CALL_IRQ 1 + +static int cpu_ipi_resched_irq, cpu_ipi_call_irq; + +#if 0 +static void dump_mtregisters(int vpe, int tc) +{ + printk("vpe %d tc %d\n", vpe, tc); + + settc(tc); + + printk(" c0 status 0x%lx\n", read_vpe_c0_status()); + printk(" vpecontrol 0x%lx\n", read_vpe_c0_vpecontrol()); + printk(" vpeconf0 0x%lx\n", read_vpe_c0_vpeconf0()); + printk(" tcstatus 0x%lx\n", read_tc_c0_tcstatus()); + printk(" tcrestart 0x%lx\n", read_tc_c0_tcrestart()); + printk(" tcbind 0x%lx\n", read_tc_c0_tcbind()); + printk(" tchalt 0x%lx\n", read_tc_c0_tchalt()); +} +#endif + +void __init sanitize_tlb_entries(void) +{ + int i, tlbsiz; + unsigned long mvpconf0, ncpu; + + if (!cpu_has_mipsmt) + return; + + set_c0_mvpcontrol(MVPCONTROL_VPC); + + /* Disable TLB sharing */ + clear_c0_mvpcontrol(MVPCONTROL_STLB); + + mvpconf0 = read_c0_mvpconf0(); + + printk(KERN_INFO "MVPConf0 0x%lx TLBS %lx PTLBE %ld\n", mvpconf0, + (mvpconf0 & MVPCONF0_TLBS) >> MVPCONF0_TLBS_SHIFT, + (mvpconf0 & MVPCONF0_PTLBE) >> MVPCONF0_PTLBE_SHIFT); + + tlbsiz = (mvpconf0 & MVPCONF0_PTLBE) >> MVPCONF0_PTLBE_SHIFT; + ncpu = ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1; + + printk(" tlbsiz %d ncpu %ld\n", tlbsiz, ncpu); + + if (tlbsiz > 0) { + /* share them out across the vpe's */ + tlbsiz /= ncpu; + + printk(KERN_INFO "setting Config1.MMU_size to %d\n", tlbsiz); + + for (i = 0; i < ncpu; i++) { + settc(i); + + if (i == 0) + write_c0_config1((read_c0_config1() & ~(0x3f << 25)) | (tlbsiz << 25)); + else + write_vpe_c0_config1((read_vpe_c0_config1() & ~(0x3f << 25)) | + (tlbsiz << 25)); + } + } + + clear_c0_mvpcontrol(MVPCONTROL_VPC); +} + +#if 0 +/* + * Use c0_MVPConf0 to find out how many CPUs are available, setting up + * phys_cpu_present_map and the logical/physical mappings. + */ +void __init prom_build_cpu_map(void) +{ + int i, num, ncpus; + + cpus_clear(phys_cpu_present_map); + + /* assume we boot on cpu 0.... */ + cpu_set(0, phys_cpu_present_map); + __cpu_number_map[0] = 0; + __cpu_logical_map[0] = 0; + + if (cpu_has_mipsmt) { + ncpus = ((read_c0_mvpconf0() & (MVPCONF0_PVPE)) >> MVPCONF0_PVPE_SHIFT) + 1; + for (i=1, num=0; i< NR_CPUS && i<ncpus; i++) { + cpu_set(i, phys_cpu_present_map); + __cpu_number_map[i] = ++num; + __cpu_logical_map[num] = i; + } + + printk(KERN_INFO "%i available secondary CPU(s)\n", num); + } +} +#endif + +static void ipi_resched_dispatch (struct pt_regs *regs) +{ + do_IRQ(MIPS_CPU_IPI_RESCHED_IRQ, regs); +} + +static void ipi_call_dispatch (struct pt_regs *regs) +{ + do_IRQ(MIPS_CPU_IPI_CALL_IRQ, regs); +} + +irqreturn_t ipi_resched_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + return IRQ_HANDLED; +} + +irqreturn_t ipi_call_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + smp_call_function_interrupt(); + + return IRQ_HANDLED; +} + +static struct irqaction irq_resched = { + .handler = ipi_resched_interrupt, + .flags = SA_INTERRUPT, + .name = "IPI_resched" +}; + +static struct irqaction irq_call = { + .handler = ipi_call_interrupt, + .flags = SA_INTERRUPT, + .name = "IPI_call" +}; + +/* + * Common setup before any secondaries are started + * Make sure all CPU's are in a sensible state before we boot any of the + * secondarys + */ +void prom_prepare_cpus(unsigned int max_cpus) +{ + unsigned long val; + int i, num; + + if (!cpu_has_mipsmt) + return; + + /* disable MT so we can configure */ + dvpe(); + dmt(); + + /* Put MVPE's into 'configuration state' */ + set_c0_mvpcontrol(MVPCONTROL_VPC); + + val = read_c0_mvpconf0(); + + /* we'll always have more TC's than VPE's, so loop setting everything + to a sensible state */ + for (i = 0, num = 0; i <= ((val & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT); i++) { + settc(i); + + /* VPE's */ + if (i <= ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT)) { + + /* deactivate all but vpe0 */ + if (i != 0) { + unsigned long tmp = read_vpe_c0_vpeconf0(); + + tmp &= ~VPECONF0_VPA; + + /* master VPE */ + tmp |= VPECONF0_MVP; + write_vpe_c0_vpeconf0(tmp); + + /* Record this as available CPU */ + if (i < max_cpus) { + cpu_set(i, phys_cpu_present_map); + __cpu_number_map[i] = ++num; + __cpu_logical_map[num] = i; + } + } + + /* disable multi-threading with TC's */ + write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() & ~VPECONTROL_TE); + + if (i != 0) { + write_vpe_c0_status((read_c0_status() & ~(ST0_IM | ST0_IE | ST0_KSU)) | ST0_CU0); + write_vpe_c0_cause(read_vpe_c0_cause() & ~CAUSEF_IP); + + /* set config to be the same as vpe0, particularly kseg0 coherency alg */ + write_vpe_c0_config( read_c0_config()); + } + + } + + /* TC's */ + + if (i != 0) { + unsigned long tmp; + + /* bind a TC to each VPE, May as well put all excess TC's + on the last VPE */ + if ( i >= (((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT)+1) ) + write_tc_c0_tcbind(read_tc_c0_tcbind() | ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) ); + else { + write_tc_c0_tcbind( read_tc_c0_tcbind() | i); + + /* and set XTC */ + write_vpe_c0_vpeconf0( read_vpe_c0_vpeconf0() | (i << VPECONF0_XTC_SHIFT)); + } + + tmp = read_tc_c0_tcstatus(); + + /* mark not allocated and not dynamically allocatable */ + tmp &= ~(TCSTATUS_A | TCSTATUS_DA); + tmp |= TCSTATUS_IXMT; /* interrupt exempt */ + write_tc_c0_tcstatus(tmp); + + write_tc_c0_tchalt(TCHALT_H); + } + } + + /* Release config state */ + clear_c0_mvpcontrol(MVPCONTROL_VPC); + + /* We'll wait until starting the secondaries before starting MVPE */ + + printk(KERN_INFO "Detected %i available secondary CPU(s)\n", num); + + /* set up ipi interrupts */ + if (cpu_has_vint) { + set_vi_handler (MIPS_CPU_IPI_RESCHED_IRQ, ipi_resched_dispatch); + set_vi_handler (MIPS_CPU_IPI_CALL_IRQ, ipi_call_dispatch); + } + + cpu_ipi_resched_irq = MIPSCPU_INT_BASE + MIPS_CPU_IPI_RESCHED_IRQ; + cpu_ipi_call_irq = MIPSCPU_INT_BASE + MIPS_CPU_IPI_CALL_IRQ; + + setup_irq(cpu_ipi_resched_irq, &irq_resched); + setup_irq(cpu_ipi_call_irq, &irq_call); + + /* need to mark IPI's as IRQ_PER_CPU */ + irq_desc[cpu_ipi_resched_irq].status |= IRQ_PER_CPU; + irq_desc[cpu_ipi_call_irq].status |= IRQ_PER_CPU; +} + +/* + * Setup the PC, SP, and GP of a secondary processor and start it + * running! + * smp_bootstrap is the place to resume from + * __KSTK_TOS(idle) is apparently the stack pointer + * (unsigned long)idle->thread_info the gp + * assumes a 1:1 mapping of TC => VPE + */ +void prom_boot_secondary(int cpu, struct task_struct *idle) +{ + dvpe(); + set_c0_mvpcontrol(MVPCONTROL_VPC); + + settc(cpu); + + /* restart */ + write_tc_c0_tcrestart((unsigned long)&smp_bootstrap); + + /* enable the tc this vpe/cpu will be running */ + write_tc_c0_tcstatus((read_tc_c0_tcstatus() & ~TCSTATUS_IXMT) | TCSTATUS_A); + + write_tc_c0_tchalt(0); + + /* enable the VPE */ + write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA); + + /* stack pointer */ + write_tc_gpr_sp( __KSTK_TOS(idle)); + + /* global pointer */ + write_tc_gpr_gp((unsigned long)idle->thread_info); + + flush_icache_range((unsigned long)idle->thread_info, + (unsigned long)idle->thread_info + + sizeof(struct thread_info)); + + /* finally out of configuration and into chaos */ + clear_c0_mvpcontrol(MVPCONTROL_VPC); + + evpe(EVPE_ENABLE); +} + +void prom_init_secondary(void) +{ + write_c0_status((read_c0_status() & ~ST0_IM ) | + (STATUSF_IP0 | STATUSF_IP1 | STATUSF_IP7)); +} + +void prom_smp_finish(void) +{ + write_c0_compare(read_c0_count() + (8* mips_hpt_frequency/HZ)); + + local_irq_enable(); +} + +void prom_cpus_done(void) +{ +} + +void core_send_ipi(int cpu, unsigned int action) +{ + int i; + unsigned long flags; + int vpflags; + + local_irq_save (flags); + + vpflags = dvpe(); /* cant access the other CPU's registers whilst MVPE enabled */ + + switch (action) { + case SMP_CALL_FUNCTION: + i = C_SW1; + break; + + case SMP_RESCHEDULE_YOURSELF: + default: + i = C_SW0; + break; + } + + /* 1:1 mapping of vpe and tc... */ + settc(cpu); + write_vpe_c0_cause(read_vpe_c0_cause() | i); + evpe(vpflags); + + local_irq_restore(flags); +} diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 876aff71cd2..e38f24b2b3d 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -28,6 +28,8 @@ #include <asm/cpu.h> #include <asm/dsp.h> #include <asm/fpu.h> +#include <asm/mipsregs.h> +#include <asm/mipsmtregs.h> #include <asm/module.h> #include <asm/pgtable.h> #include <asm/ptrace.h> @@ -56,6 +58,7 @@ extern asmlinkage void handle_tr(void); extern asmlinkage void handle_fpe(void); extern asmlinkage void handle_mdmx(void); extern asmlinkage void handle_watch(void); +extern asmlinkage void handle_mt(void); extern asmlinkage void handle_dsp(void); extern asmlinkage void handle_mcheck(void); extern asmlinkage void handle_reserved(void); @@ -797,6 +800,14 @@ asmlinkage void do_mcheck(struct pt_regs *regs) (regs->cp0_status & ST0_TS) ? "" : "not "); } +asmlinkage void do_mt(struct pt_regs *regs) +{ + die_if_kernel("MIPS MT Thread exception in kernel", regs); + + force_sig(SIGILL, current); +} + + asmlinkage void do_dsp(struct pt_regs *regs) { if (cpu_has_dsp) @@ -1338,6 +1349,9 @@ void __init trap_init(void) if (cpu_has_mcheck) set_except_vector(24, handle_mcheck); + if (cpu_has_mipsmt) + set_except_vector(25, handle_mt); + if (cpu_has_dsp) set_except_vector(26, handle_dsp); diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c index 6bf42ba08f0..97fefcc9dbe 100644 --- a/arch/mips/kernel/vpe.c +++ b/arch/mips/kernel/vpe.c @@ -32,7 +32,7 @@ * mknod /dev/vpe0 c 63 0 * mknod /dev/vpe1 c 63 1 */ - +#include <linux/config.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/fs.h> @@ -49,6 +49,7 @@ #include <linux/poll.h> #include <linux/bootmem.h> #include <asm/mipsregs.h> +#include <asm/mipsmtregs.h> #include <asm/cacheflush.h> #include <asm/atomic.h> #include <asm/cpu.h> @@ -697,7 +698,7 @@ int vpe_run(vpe_t * v) dvpe(); /* Put MVPE's into 'configuration state' */ - write_c0_mvpcontrol(read_c0_mvpcontrol() | MVPCONTROL_VPC); + set_c0_mvpcontrol(MVPCONTROL_VPC); if (!list_empty(&v->tc)) { if ((t = list_entry(v->tc.next, struct tc, tc)) == NULL) { @@ -760,7 +761,7 @@ int vpe_run(vpe_t * v) write_vpe_c0_cause(0); /* take system out of configuration state */ - write_c0_mvpcontrol(read_c0_mvpcontrol() & ~MVPCONTROL_VPC); + clear_c0_mvpcontrol(MVPCONTROL_VPC); /* clear interrupts enabled IE, ERL, EXL, and KSU from c0 status */ write_vpe_c0_status(read_vpe_c0_status() & ~(ST0_ERL | ST0_KSU | ST0_IE | ST0_EXL)); @@ -1134,7 +1135,7 @@ int vpe_free(vpe_handle vpe) evpe_flags = dvpe(); /* Put MVPE's into 'configuration state' */ - write_c0_mvpcontrol(read_c0_mvpcontrol() | MVPCONTROL_VPC); + set_c0_mvpcontrol(MVPCONTROL_VPC); settc(t->index); write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~VPECONF0_VPA); @@ -1145,7 +1146,7 @@ int vpe_free(vpe_handle vpe) v->state = VPE_STATE_UNUSED; - write_c0_mvpcontrol(read_c0_mvpcontrol() & ~MVPCONTROL_VPC); + clear_c0_mvpcontrol(MVPCONTROL_VPC); evpe(evpe_flags); return 0; @@ -1191,7 +1192,7 @@ static int __init vpe_module_init(void) dvpe(); /* Put MVPE's into 'configuration state' */ - write_c0_mvpcontrol(read_c0_mvpcontrol() | MVPCONTROL_VPC); + set_c0_mvpcontrol(MVPCONTROL_VPC); /* dump_mtregs(); */ @@ -1270,7 +1271,7 @@ static int __init vpe_module_init(void) } /* release config state */ - write_c0_mvpcontrol(read_c0_mvpcontrol() & ~MVPCONTROL_VPC); + clear_c0_mvpcontrol(MVPCONTROL_VPC); return 0; } |