summaryrefslogtreecommitdiffstats
path: root/arch/mips/lantiq/xway/reset.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/lantiq/xway/reset.c')
-rw-r--r--arch/mips/lantiq/xway/reset.c58
1 files changed, 51 insertions, 7 deletions
diff --git a/arch/mips/lantiq/xway/reset.c b/arch/mips/lantiq/xway/reset.c
index 22c55f73aa9..544dbb7fb42 100644
--- a/arch/mips/lantiq/xway/reset.c
+++ b/arch/mips/lantiq/xway/reset.c
@@ -28,17 +28,24 @@
#define RCU_RST_REQ 0x0010
/* reset status register */
#define RCU_RST_STAT 0x0014
+/* vr9 gphy registers */
+#define RCU_GFS_ADD0_XRX200 0x0020
+#define RCU_GFS_ADD1_XRX200 0x0068
/* reboot bit */
+#define RCU_RD_GPHY0_XRX200 BIT(31)
#define RCU_RD_SRST BIT(30)
+#define RCU_RD_GPHY1_XRX200 BIT(29)
+
/* reset cause */
#define RCU_STAT_SHIFT 26
/* boot selection */
-#define RCU_BOOT_SEL_SHIFT 26
-#define RCU_BOOT_SEL_MASK 0x7
+#define RCU_BOOT_SEL(x) ((x >> 18) & 0x7)
+#define RCU_BOOT_SEL_XRX200(x) (((x >> 17) & 0xf) | ((x >> 8) & 0x10))
/* remapped base addr of the reset control unit */
static void __iomem *ltq_rcu_membase;
+static struct device_node *ltq_rcu_np;
/* This function is used by the watchdog driver */
int ltq_reset_cause(void)
@@ -52,7 +59,41 @@ EXPORT_SYMBOL_GPL(ltq_reset_cause);
unsigned char ltq_boot_select(void)
{
u32 val = ltq_rcu_r32(RCU_RST_STAT);
- return (val >> RCU_BOOT_SEL_SHIFT) & RCU_BOOT_SEL_MASK;
+
+ if (of_device_is_compatible(ltq_rcu_np, "lantiq,rcu-xrx200"))
+ return RCU_BOOT_SEL_XRX200(val);
+
+ return RCU_BOOT_SEL(val);
+}
+
+/* reset / boot a gphy */
+static struct ltq_xrx200_gphy_reset {
+ u32 rd;
+ u32 addr;
+} xrx200_gphy[] = {
+ {RCU_RD_GPHY0_XRX200, RCU_GFS_ADD0_XRX200},
+ {RCU_RD_GPHY1_XRX200, RCU_GFS_ADD1_XRX200},
+};
+
+/* reset and boot a gphy. these phys only exist on xrx200 SoC */
+int xrx200_gphy_boot(struct device *dev, unsigned int id, dma_addr_t dev_addr)
+{
+ if (!of_device_is_compatible(ltq_rcu_np, "lantiq,rcu-xrx200")) {
+ dev_err(dev, "this SoC has no GPHY\n");
+ return -EINVAL;
+ }
+ if (id > 1) {
+ dev_err(dev, "%u is an invalid gphy id\n", id);
+ return -EINVAL;
+ }
+ dev_info(dev, "booting GPHY%u firmware at %X\n", id, dev_addr);
+
+ ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) | xrx200_gphy[id].rd,
+ RCU_RST_REQ);
+ ltq_rcu_w32(dev_addr, xrx200_gphy[id].addr);
+ ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) & ~xrx200_gphy[id].rd,
+ RCU_RST_REQ);
+ return 0;
}
/* reset a io domain for u micro seconds */
@@ -85,14 +126,17 @@ static void ltq_machine_power_off(void)
static int __init mips_reboot_setup(void)
{
struct resource res;
- struct device_node *np =
- of_find_compatible_node(NULL, NULL, "lantiq,rcu-xway");
+
+ ltq_rcu_np = of_find_compatible_node(NULL, NULL, "lantiq,rcu-xway");
+ if (!ltq_rcu_np)
+ ltq_rcu_np = of_find_compatible_node(NULL, NULL,
+ "lantiq,rcu-xrx200");
/* check if all the reset register range is available */
- if (!np)
+ if (!ltq_rcu_np)
panic("Failed to load reset resources from devicetree");
- if (of_address_to_resource(np, 0, &res))
+ if (of_address_to_resource(ltq_rcu_np, 0, &res))
panic("Failed to get rcu memory range");
if (request_mem_region(res.start, resource_size(&res), res.name) < 0)