diff options
Diffstat (limited to 'arch/mips/loongson/lemote-2f/ec_kb3310b.h')
| -rw-r--r-- | arch/mips/loongson/lemote-2f/ec_kb3310b.h | 188 |
1 files changed, 188 insertions, 0 deletions
diff --git a/arch/mips/loongson/lemote-2f/ec_kb3310b.h b/arch/mips/loongson/lemote-2f/ec_kb3310b.h new file mode 100644 index 00000000000..1595a21b315 --- /dev/null +++ b/arch/mips/loongson/lemote-2f/ec_kb3310b.h @@ -0,0 +1,188 @@ +/* + * KB3310B Embedded Controller + * + * Copyright (C) 2008 Lemote Inc. + * Author: liujl <liujl@lemote.com>, 2008-03-14 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef _EC_KB3310B_H +#define _EC_KB3310B_H + +extern unsigned char ec_read(unsigned short addr); +extern void ec_write(unsigned short addr, unsigned char val); +extern int ec_query_seq(unsigned char cmd); +extern int ec_query_event_num(void); +extern int ec_get_event_num(void); + +typedef int (*sci_handler) (int status); +extern sci_handler yeeloong_report_lid_status; + +#define SCI_IRQ_NUM 0x0A + +/* + * The following registers are determined by the EC index configuration. + * 1, fill the PORT_HIGH as EC register high part. + * 2, fill the PORT_LOW as EC register low part. + * 3, fill the PORT_DATA as EC register write data or get the data from it. + */ +#define EC_IO_PORT_HIGH 0x0381 +#define EC_IO_PORT_LOW 0x0382 +#define EC_IO_PORT_DATA 0x0383 + +/* + * EC delay time is 500us for register and status access + */ +#define EC_REG_DELAY 500 /* unit : us */ +#define EC_CMD_TIMEOUT 0x1000 + +/* + * EC access port for SCI communication + */ +#define EC_CMD_PORT 0x66 +#define EC_STS_PORT 0x66 +#define EC_DAT_PORT 0x62 +#define CMD_INIT_IDLE_MODE 0xdd +#define CMD_EXIT_IDLE_MODE 0xdf +#define CMD_INIT_RESET_MODE 0xd8 +#define CMD_REBOOT_SYSTEM 0x8c +#define CMD_GET_EVENT_NUM 0x84 +#define CMD_PROGRAM_PIECE 0xda + +/* temperature & fan registers */ +#define REG_TEMPERATURE_VALUE 0xF458 +#define REG_FAN_AUTO_MAN_SWITCH 0xF459 +#define BIT_FAN_AUTO 0 +#define BIT_FAN_MANUAL 1 +#define REG_FAN_CONTROL 0xF4D2 +#define BIT_FAN_CONTROL_ON (1 << 0) +#define BIT_FAN_CONTROL_OFF (0 << 0) +#define REG_FAN_STATUS 0xF4DA +#define BIT_FAN_STATUS_ON (1 << 0) +#define BIT_FAN_STATUS_OFF (0 << 0) +#define REG_FAN_SPEED_HIGH 0xFE22 +#define REG_FAN_SPEED_LOW 0xFE23 +#define REG_FAN_SPEED_LEVEL 0xF4CC +/* fan speed divider */ +#define FAN_SPEED_DIVIDER 480000 /* (60*1000*1000/62.5/2)*/ + +/* battery registers */ +#define REG_BAT_DESIGN_CAP_HIGH 0xF77D +#define REG_BAT_DESIGN_CAP_LOW 0xF77E +#define REG_BAT_FULLCHG_CAP_HIGH 0xF780 +#define REG_BAT_FULLCHG_CAP_LOW 0xF781 +#define REG_BAT_DESIGN_VOL_HIGH 0xF782 +#define REG_BAT_DESIGN_VOL_LOW 0xF783 +#define REG_BAT_CURRENT_HIGH 0xF784 +#define REG_BAT_CURRENT_LOW 0xF785 +#define REG_BAT_VOLTAGE_HIGH 0xF786 +#define REG_BAT_VOLTAGE_LOW 0xF787 +#define REG_BAT_TEMPERATURE_HIGH 0xF788 +#define REG_BAT_TEMPERATURE_LOW 0xF789 +#define REG_BAT_RELATIVE_CAP_HIGH 0xF492 +#define REG_BAT_RELATIVE_CAP_LOW 0xF493 +#define REG_BAT_VENDOR 0xF4C4 +#define FLAG_BAT_VENDOR_SANYO 0x01 +#define FLAG_BAT_VENDOR_SIMPLO 0x02 +#define REG_BAT_CELL_COUNT 0xF4C6 +#define FLAG_BAT_CELL_3S1P 0x03 +#define FLAG_BAT_CELL_3S2P 0x06 +#define REG_BAT_CHARGE 0xF4A2 +#define FLAG_BAT_CHARGE_DISCHARGE 0x01 +#define FLAG_BAT_CHARGE_CHARGE 0x02 +#define FLAG_BAT_CHARGE_ACPOWER 0x00 +#define REG_BAT_STATUS 0xF4B0 +#define BIT_BAT_STATUS_LOW (1 << 5) +#define BIT_BAT_STATUS_DESTROY (1 << 2) +#define BIT_BAT_STATUS_FULL (1 << 1) +#define BIT_BAT_STATUS_IN (1 << 0) +#define REG_BAT_CHARGE_STATUS 0xF4B1 +#define BIT_BAT_CHARGE_STATUS_OVERTEMP (1 << 2) +#define BIT_BAT_CHARGE_STATUS_PRECHG (1 << 1) +#define REG_BAT_STATE 0xF482 +#define BIT_BAT_STATE_CHARGING (1 << 1) +#define BIT_BAT_STATE_DISCHARGING (1 << 0) +#define REG_BAT_POWER 0xF440 +#define BIT_BAT_POWER_S3 (1 << 2) +#define BIT_BAT_POWER_ON (1 << 1) +#define BIT_BAT_POWER_ACIN (1 << 0) + +/* other registers */ +/* Audio: rd/wr */ +#define REG_AUDIO_VOLUME 0xF46C +#define REG_AUDIO_MUTE 0xF4E7 +#define REG_AUDIO_BEEP 0xF4D0 +/* USB port power or not: rd/wr */ +#define REG_USB0_FLAG 0xF461 +#define REG_USB1_FLAG 0xF462 +#define REG_USB2_FLAG 0xF463 +#define BIT_USB_FLAG_ON 1 +#define BIT_USB_FLAG_OFF 0 +/* LID */ +#define REG_LID_DETECT 0xF4BD +#define BIT_LID_DETECT_ON 1 +#define BIT_LID_DETECT_OFF 0 +/* CRT */ +#define REG_CRT_DETECT 0xF4AD +#define BIT_CRT_DETECT_PLUG 1 +#define BIT_CRT_DETECT_UNPLUG 0 +/* LCD backlight brightness adjust: 9 levels */ +#define REG_DISPLAY_BRIGHTNESS 0xF4F5 +/* Black screen Status */ +#define BIT_DISPLAY_LCD_ON 1 +#define BIT_DISPLAY_LCD_OFF 0 +/* LCD backlight control: off/restore */ +#define REG_BACKLIGHT_CTRL 0xF7BD +#define BIT_BACKLIGHT_ON 1 +#define BIT_BACKLIGHT_OFF 0 +/* Reset the machine auto-clear: rd/wr */ +#define REG_RESET 0xF4EC +#define BIT_RESET_ON 1 +/* Light the led: rd/wr */ +#define REG_LED 0xF4C8 +#define BIT_LED_RED_POWER (1 << 0) +#define BIT_LED_ORANGE_POWER (1 << 1) +#define BIT_LED_GREEN_CHARGE (1 << 2) +#define BIT_LED_RED_CHARGE (1 << 3) +#define BIT_LED_NUMLOCK (1 << 4) +/* Test led mode, all led on/off */ +#define REG_LED_TEST 0xF4C2 +#define BIT_LED_TEST_IN 1 +#define BIT_LED_TEST_OUT 0 +/* Camera on/off */ +#define REG_CAMERA_STATUS 0xF46A +#define BIT_CAMERA_STATUS_ON 1 +#define BIT_CAMERA_STATUS_OFF 0 +#define REG_CAMERA_CONTROL 0xF7B7 +#define BIT_CAMERA_CONTROL_OFF 0 +#define BIT_CAMERA_CONTROL_ON 1 +/* Wlan Status */ +#define REG_WLAN 0xF4FA +#define BIT_WLAN_ON 1 +#define BIT_WLAN_OFF 0 +#define REG_DISPLAY_LCD 0xF79F + +/* SCI Event Number from EC */ +enum { + EVENT_LID = 0x23, /* LID open/close */ + EVENT_DISPLAY_TOGGLE, /* Fn+F3 for display switch */ + EVENT_SLEEP, /* Fn+F1 for entering sleep mode */ + EVENT_OVERTEMP, /* Over-temperature happened */ + EVENT_CRT_DETECT, /* CRT is connected */ + EVENT_CAMERA, /* Camera on/off */ + EVENT_USB_OC2, /* USB2 Over Current occurred */ + EVENT_USB_OC0, /* USB0 Over Current occurred */ + EVENT_BLACK_SCREEN, /* Turn on/off backlight */ + EVENT_AUDIO_MUTE, /* Mute on/off */ + EVENT_DISPLAY_BRIGHTNESS,/* LCD backlight brightness adjust */ + EVENT_AC_BAT, /* AC & Battery relative issue */ + EVENT_AUDIO_VOLUME, /* Volume adjust */ + EVENT_WLAN, /* Wlan on/off */ + EVENT_END +}; + +#endif /* !_EC_KB3310B_H */ |