diff options
Diffstat (limited to 'arch/mips/loongson/lemote-2f')
| -rw-r--r-- | arch/mips/loongson/lemote-2f/Makefile | 11 | ||||
| -rw-r--r-- | arch/mips/loongson/lemote-2f/ec_kb3310b.c | 130 | ||||
| -rw-r--r-- | arch/mips/loongson/lemote-2f/ec_kb3310b.h | 188 | ||||
| -rw-r--r-- | arch/mips/loongson/lemote-2f/irq.c | 134 | ||||
| -rw-r--r-- | arch/mips/loongson/lemote-2f/pm.c | 149 | ||||
| -rw-r--r-- | arch/mips/loongson/lemote-2f/reset.c | 159 |
6 files changed, 771 insertions, 0 deletions
diff --git a/arch/mips/loongson/lemote-2f/Makefile b/arch/mips/loongson/lemote-2f/Makefile new file mode 100644 index 00000000000..4d84b27dc41 --- /dev/null +++ b/arch/mips/loongson/lemote-2f/Makefile @@ -0,0 +1,11 @@ +# +# Makefile for lemote loongson2f family machines +# + +obj-y += irq.o reset.o ec_kb3310b.o + +# +# Suspend Support +# + +obj-$(CONFIG_LOONGSON_SUSPEND) += pm.o diff --git a/arch/mips/loongson/lemote-2f/ec_kb3310b.c b/arch/mips/loongson/lemote-2f/ec_kb3310b.c new file mode 100644 index 00000000000..4d84111a2cd --- /dev/null +++ b/arch/mips/loongson/lemote-2f/ec_kb3310b.c @@ -0,0 +1,130 @@ +/* + * Basic KB3310B Embedded Controller support for the YeeLoong 2F netbook + * + * Copyright (C) 2008 Lemote Inc. + * Author: liujl <liujl@lemote.com>, 2008-04-20 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/delay.h> + +#include "ec_kb3310b.h" + +static DEFINE_SPINLOCK(index_access_lock); +static DEFINE_SPINLOCK(port_access_lock); + +unsigned char ec_read(unsigned short addr) +{ + unsigned char value; + unsigned long flags; + + spin_lock_irqsave(&index_access_lock, flags); + outb((addr & 0xff00) >> 8, EC_IO_PORT_HIGH); + outb((addr & 0x00ff), EC_IO_PORT_LOW); + value = inb(EC_IO_PORT_DATA); + spin_unlock_irqrestore(&index_access_lock, flags); + + return value; +} +EXPORT_SYMBOL_GPL(ec_read); + +void ec_write(unsigned short addr, unsigned char val) +{ + unsigned long flags; + + spin_lock_irqsave(&index_access_lock, flags); + outb((addr & 0xff00) >> 8, EC_IO_PORT_HIGH); + outb((addr & 0x00ff), EC_IO_PORT_LOW); + outb(val, EC_IO_PORT_DATA); + /* flush the write action */ + inb(EC_IO_PORT_DATA); + spin_unlock_irqrestore(&index_access_lock, flags); + + return; +} +EXPORT_SYMBOL_GPL(ec_write); + +/* + * This function is used for EC command writes and corresponding status queries. + */ +int ec_query_seq(unsigned char cmd) +{ + int timeout; + unsigned char status; + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(&port_access_lock, flags); + + /* make chip goto reset mode */ + udelay(EC_REG_DELAY); + outb(cmd, EC_CMD_PORT); + udelay(EC_REG_DELAY); + + /* check if the command is received by ec */ + timeout = EC_CMD_TIMEOUT; + status = inb(EC_STS_PORT); + while (timeout-- && (status & (1 << 1))) { + status = inb(EC_STS_PORT); + udelay(EC_REG_DELAY); + } + + if (timeout <= 0) { + printk(KERN_ERR "%s: deadable error : timeout...\n", __func__); + ret = -EINVAL; + } else + printk(KERN_INFO + "(%x/%d)ec issued command %d status : 0x%x\n", + timeout, EC_CMD_TIMEOUT - timeout, cmd, status); + + spin_unlock_irqrestore(&port_access_lock, flags); + + return ret; +} +EXPORT_SYMBOL_GPL(ec_query_seq); + +/* + * Send query command to EC to get the proper event number + */ +int ec_query_event_num(void) +{ + return ec_query_seq(CMD_GET_EVENT_NUM); +} +EXPORT_SYMBOL(ec_query_event_num); + +/* + * Get event number from EC + * + * NOTE: This routine must follow the query_event_num function in the + * interrupt. + */ +int ec_get_event_num(void) +{ + int timeout = 100; + unsigned char value; + unsigned char status; + + udelay(EC_REG_DELAY); + status = inb(EC_STS_PORT); + udelay(EC_REG_DELAY); + while (timeout-- && !(status & (1 << 0))) { + status = inb(EC_STS_PORT); + udelay(EC_REG_DELAY); + } + if (timeout <= 0) { + pr_info("%s: get event number timeout.\n", __func__); + + return -EINVAL; + } + value = inb(EC_DAT_PORT); + udelay(EC_REG_DELAY); + + return value; +} +EXPORT_SYMBOL(ec_get_event_num); diff --git a/arch/mips/loongson/lemote-2f/ec_kb3310b.h b/arch/mips/loongson/lemote-2f/ec_kb3310b.h new file mode 100644 index 00000000000..1595a21b315 --- /dev/null +++ b/arch/mips/loongson/lemote-2f/ec_kb3310b.h @@ -0,0 +1,188 @@ +/* + * KB3310B Embedded Controller + * + * Copyright (C) 2008 Lemote Inc. + * Author: liujl <liujl@lemote.com>, 2008-03-14 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef _EC_KB3310B_H +#define _EC_KB3310B_H + +extern unsigned char ec_read(unsigned short addr); +extern void ec_write(unsigned short addr, unsigned char val); +extern int ec_query_seq(unsigned char cmd); +extern int ec_query_event_num(void); +extern int ec_get_event_num(void); + +typedef int (*sci_handler) (int status); +extern sci_handler yeeloong_report_lid_status; + +#define SCI_IRQ_NUM 0x0A + +/* + * The following registers are determined by the EC index configuration. + * 1, fill the PORT_HIGH as EC register high part. + * 2, fill the PORT_LOW as EC register low part. + * 3, fill the PORT_DATA as EC register write data or get the data from it. + */ +#define EC_IO_PORT_HIGH 0x0381 +#define EC_IO_PORT_LOW 0x0382 +#define EC_IO_PORT_DATA 0x0383 + +/* + * EC delay time is 500us for register and status access + */ +#define EC_REG_DELAY 500 /* unit : us */ +#define EC_CMD_TIMEOUT 0x1000 + +/* + * EC access port for SCI communication + */ +#define EC_CMD_PORT 0x66 +#define EC_STS_PORT 0x66 +#define EC_DAT_PORT 0x62 +#define CMD_INIT_IDLE_MODE 0xdd +#define CMD_EXIT_IDLE_MODE 0xdf +#define CMD_INIT_RESET_MODE 0xd8 +#define CMD_REBOOT_SYSTEM 0x8c +#define CMD_GET_EVENT_NUM 0x84 +#define CMD_PROGRAM_PIECE 0xda + +/* temperature & fan registers */ +#define REG_TEMPERATURE_VALUE 0xF458 +#define REG_FAN_AUTO_MAN_SWITCH 0xF459 +#define BIT_FAN_AUTO 0 +#define BIT_FAN_MANUAL 1 +#define REG_FAN_CONTROL 0xF4D2 +#define BIT_FAN_CONTROL_ON (1 << 0) +#define BIT_FAN_CONTROL_OFF (0 << 0) +#define REG_FAN_STATUS 0xF4DA +#define BIT_FAN_STATUS_ON (1 << 0) +#define BIT_FAN_STATUS_OFF (0 << 0) +#define REG_FAN_SPEED_HIGH 0xFE22 +#define REG_FAN_SPEED_LOW 0xFE23 +#define REG_FAN_SPEED_LEVEL 0xF4CC +/* fan speed divider */ +#define FAN_SPEED_DIVIDER 480000 /* (60*1000*1000/62.5/2)*/ + +/* battery registers */ +#define REG_BAT_DESIGN_CAP_HIGH 0xF77D +#define REG_BAT_DESIGN_CAP_LOW 0xF77E +#define REG_BAT_FULLCHG_CAP_HIGH 0xF780 +#define REG_BAT_FULLCHG_CAP_LOW 0xF781 +#define REG_BAT_DESIGN_VOL_HIGH 0xF782 +#define REG_BAT_DESIGN_VOL_LOW 0xF783 +#define REG_BAT_CURRENT_HIGH 0xF784 +#define REG_BAT_CURRENT_LOW 0xF785 +#define REG_BAT_VOLTAGE_HIGH 0xF786 +#define REG_BAT_VOLTAGE_LOW 0xF787 +#define REG_BAT_TEMPERATURE_HIGH 0xF788 +#define REG_BAT_TEMPERATURE_LOW 0xF789 +#define REG_BAT_RELATIVE_CAP_HIGH 0xF492 +#define REG_BAT_RELATIVE_CAP_LOW 0xF493 +#define REG_BAT_VENDOR 0xF4C4 +#define FLAG_BAT_VENDOR_SANYO 0x01 +#define FLAG_BAT_VENDOR_SIMPLO 0x02 +#define REG_BAT_CELL_COUNT 0xF4C6 +#define FLAG_BAT_CELL_3S1P 0x03 +#define FLAG_BAT_CELL_3S2P 0x06 +#define REG_BAT_CHARGE 0xF4A2 +#define FLAG_BAT_CHARGE_DISCHARGE 0x01 +#define FLAG_BAT_CHARGE_CHARGE 0x02 +#define FLAG_BAT_CHARGE_ACPOWER 0x00 +#define REG_BAT_STATUS 0xF4B0 +#define BIT_BAT_STATUS_LOW (1 << 5) +#define BIT_BAT_STATUS_DESTROY (1 << 2) +#define BIT_BAT_STATUS_FULL (1 << 1) +#define BIT_BAT_STATUS_IN (1 << 0) +#define REG_BAT_CHARGE_STATUS 0xF4B1 +#define BIT_BAT_CHARGE_STATUS_OVERTEMP (1 << 2) +#define BIT_BAT_CHARGE_STATUS_PRECHG (1 << 1) +#define REG_BAT_STATE 0xF482 +#define BIT_BAT_STATE_CHARGING (1 << 1) +#define BIT_BAT_STATE_DISCHARGING (1 << 0) +#define REG_BAT_POWER 0xF440 +#define BIT_BAT_POWER_S3 (1 << 2) +#define BIT_BAT_POWER_ON (1 << 1) +#define BIT_BAT_POWER_ACIN (1 << 0) + +/* other registers */ +/* Audio: rd/wr */ +#define REG_AUDIO_VOLUME 0xF46C +#define REG_AUDIO_MUTE 0xF4E7 +#define REG_AUDIO_BEEP 0xF4D0 +/* USB port power or not: rd/wr */ +#define REG_USB0_FLAG 0xF461 +#define REG_USB1_FLAG 0xF462 +#define REG_USB2_FLAG 0xF463 +#define BIT_USB_FLAG_ON 1 +#define BIT_USB_FLAG_OFF 0 +/* LID */ +#define REG_LID_DETECT 0xF4BD +#define BIT_LID_DETECT_ON 1 +#define BIT_LID_DETECT_OFF 0 +/* CRT */ +#define REG_CRT_DETECT 0xF4AD +#define BIT_CRT_DETECT_PLUG 1 +#define BIT_CRT_DETECT_UNPLUG 0 +/* LCD backlight brightness adjust: 9 levels */ +#define REG_DISPLAY_BRIGHTNESS 0xF4F5 +/* Black screen Status */ +#define BIT_DISPLAY_LCD_ON 1 +#define BIT_DISPLAY_LCD_OFF 0 +/* LCD backlight control: off/restore */ +#define REG_BACKLIGHT_CTRL 0xF7BD +#define BIT_BACKLIGHT_ON 1 +#define BIT_BACKLIGHT_OFF 0 +/* Reset the machine auto-clear: rd/wr */ +#define REG_RESET 0xF4EC +#define BIT_RESET_ON 1 +/* Light the led: rd/wr */ +#define REG_LED 0xF4C8 +#define BIT_LED_RED_POWER (1 << 0) +#define BIT_LED_ORANGE_POWER (1 << 1) +#define BIT_LED_GREEN_CHARGE (1 << 2) +#define BIT_LED_RED_CHARGE (1 << 3) +#define BIT_LED_NUMLOCK (1 << 4) +/* Test led mode, all led on/off */ +#define REG_LED_TEST 0xF4C2 +#define BIT_LED_TEST_IN 1 +#define BIT_LED_TEST_OUT 0 +/* Camera on/off */ +#define REG_CAMERA_STATUS 0xF46A +#define BIT_CAMERA_STATUS_ON 1 +#define BIT_CAMERA_STATUS_OFF 0 +#define REG_CAMERA_CONTROL 0xF7B7 +#define BIT_CAMERA_CONTROL_OFF 0 +#define BIT_CAMERA_CONTROL_ON 1 +/* Wlan Status */ +#define REG_WLAN 0xF4FA +#define BIT_WLAN_ON 1 +#define BIT_WLAN_OFF 0 +#define REG_DISPLAY_LCD 0xF79F + +/* SCI Event Number from EC */ +enum { + EVENT_LID = 0x23, /* LID open/close */ + EVENT_DISPLAY_TOGGLE, /* Fn+F3 for display switch */ + EVENT_SLEEP, /* Fn+F1 for entering sleep mode */ + EVENT_OVERTEMP, /* Over-temperature happened */ + EVENT_CRT_DETECT, /* CRT is connected */ + EVENT_CAMERA, /* Camera on/off */ + EVENT_USB_OC2, /* USB2 Over Current occurred */ + EVENT_USB_OC0, /* USB0 Over Current occurred */ + EVENT_BLACK_SCREEN, /* Turn on/off backlight */ + EVENT_AUDIO_MUTE, /* Mute on/off */ + EVENT_DISPLAY_BRIGHTNESS,/* LCD backlight brightness adjust */ + EVENT_AC_BAT, /* AC & Battery relative issue */ + EVENT_AUDIO_VOLUME, /* Volume adjust */ + EVENT_WLAN, /* Wlan on/off */ + EVENT_END +}; + +#endif /* !_EC_KB3310B_H */ diff --git a/arch/mips/loongson/lemote-2f/irq.c b/arch/mips/loongson/lemote-2f/irq.c new file mode 100644 index 00000000000..77d32f9cf31 --- /dev/null +++ b/arch/mips/loongson/lemote-2f/irq.c @@ -0,0 +1,134 @@ +/* + * Copyright (C) 2007 Lemote Inc. + * Author: Fuxin Zhang, zhangfx@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/interrupt.h> +#include <linux/module.h> + +#include <asm/irq_cpu.h> +#include <asm/i8259.h> +#include <asm/mipsregs.h> + +#include <loongson.h> +#include <machine.h> + +#define LOONGSON_TIMER_IRQ (MIPS_CPU_IRQ_BASE + 7) /* cpu timer */ +#define LOONGSON_PERFCNT_IRQ (MIPS_CPU_IRQ_BASE + 6) /* cpu perf counter */ +#define LOONGSON_NORTH_BRIDGE_IRQ (MIPS_CPU_IRQ_BASE + 6) /* bonito */ +#define LOONGSON_UART_IRQ (MIPS_CPU_IRQ_BASE + 3) /* cpu serial port */ +#define LOONGSON_SOUTH_BRIDGE_IRQ (MIPS_CPU_IRQ_BASE + 2) /* i8259 */ + +#define LOONGSON_INT_BIT_INT0 (1 << 11) +#define LOONGSON_INT_BIT_INT1 (1 << 12) + +/* + * The generic i8259_irq() make the kernel hang on booting. Since we cannot + * get the irq via the IRR directly, we access the ISR instead. + */ +int mach_i8259_irq(void) +{ + int irq, isr; + + irq = -1; + + if ((LOONGSON_INTISR & LOONGSON_INTEN) & LOONGSON_INT_BIT_INT0) { + spin_lock(&i8259A_lock); + isr = inb(PIC_MASTER_CMD) & + ~inb(PIC_MASTER_IMR) & ~(1 << PIC_CASCADE_IR); + if (!isr) + isr = (inb(PIC_SLAVE_CMD) & ~inb(PIC_SLAVE_IMR)) << 8; + irq = ffs(isr) - 1; + if (unlikely(irq == 7)) { + /* + * This may be a spurious interrupt. + * + * Read the interrupt status register (ISR). If the most + * significant bit is not set then there is no valid + * interrupt. + */ + outb(0x0B, PIC_MASTER_ISR); /* ISR register */ + if (~inb(PIC_MASTER_ISR) & 0x80) + irq = -1; + } + spin_unlock(&i8259A_lock); + } + + return irq; +} +EXPORT_SYMBOL(mach_i8259_irq); + +static void i8259_irqdispatch(void) +{ + int irq; + + irq = mach_i8259_irq(); + if (irq >= 0) + do_IRQ(irq); + else + spurious_interrupt(); +} + +void mach_irq_dispatch(unsigned int pending) +{ + if (pending & CAUSEF_IP7) + do_IRQ(LOONGSON_TIMER_IRQ); + else if (pending & CAUSEF_IP6) { /* North Bridge, Perf counter */ +#ifdef CONFIG_OPROFILE + do_IRQ(LOONGSON2_PERFCNT_IRQ); +#endif + bonito_irqdispatch(); + } else if (pending & CAUSEF_IP3) /* CPU UART */ + do_IRQ(LOONGSON_UART_IRQ); + else if (pending & CAUSEF_IP2) /* South Bridge */ + i8259_irqdispatch(); + else + spurious_interrupt(); +} + +void __init set_irq_trigger_mode(void) +{ + /* setup cs5536 as high level trigger */ + LOONGSON_INTPOL = LOONGSON_INT_BIT_INT0 | LOONGSON_INT_BIT_INT1; + LOONGSON_INTEDGE &= ~(LOONGSON_INT_BIT_INT0 | LOONGSON_INT_BIT_INT1); +} + +static irqreturn_t ip6_action(int cpl, void *dev_id) +{ + return IRQ_HANDLED; +} + +struct irqaction ip6_irqaction = { + .handler = ip6_action, + .name = "cascade", + .flags = IRQF_SHARED, +}; + +struct irqaction cascade_irqaction = { + .handler = no_action, + .name = "cascade", +}; + +void __init mach_init_irq(void) +{ + /* init all controller + * 0-15 ------> i8259 interrupt + * 16-23 ------> mips cpu interrupt + * 32-63 ------> bonito irq + */ + + /* Sets the first-level interrupt dispatcher. */ + mips_cpu_irq_init(); + init_i8259_irqs(); + bonito_irq_init(); + + /* setup north bridge irq (bonito) */ + setup_irq(LOONGSON_NORTH_BRIDGE_IRQ, &ip6_irqaction); + /* setup source bridge irq (i8259) */ + setup_irq(LOONGSON_SOUTH_BRIDGE_IRQ, &cascade_irqaction); +} diff --git a/arch/mips/loongson/lemote-2f/pm.c b/arch/mips/loongson/lemote-2f/pm.c new file mode 100644 index 00000000000..d7af2e61659 --- /dev/null +++ b/arch/mips/loongson/lemote-2f/pm.c @@ -0,0 +1,149 @@ +/* + * Lemote loongson2f family machines' specific suspend support + * + * Copyright (C) 2009 Lemote Inc. + * Author: Wu Zhangjin <wuzj@lemote.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/suspend.h> +#include <linux/interrupt.h> +#include <linux/pm.h> +#include <linux/i8042.h> +#include <linux/module.h> + +#include <asm/i8259.h> +#include <asm/mipsregs.h> +#include <asm/bootinfo.h> + +#include <loongson.h> + +#include <cs5536/cs5536_mfgpt.h> +#include "ec_kb3310b.h" + +#define I8042_KBD_IRQ 1 +#define I8042_CTR_KBDINT 0x01 +#define I8042_CTR_KBDDIS 0x10 + +static unsigned char i8042_ctr; + +static int i8042_enable_kbd_port(void) +{ + if (i8042_command(&i8042_ctr, I8042_CMD_CTL_RCTR)) { + pr_err("i8042.c: Can't read CTR while enabling i8042 kbd port." + "\n"); + return -EIO; + } + + i8042_ctr &= ~I8042_CTR_KBDDIS; + i8042_ctr |= I8042_CTR_KBDINT; + + if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) { + i8042_ctr &= ~I8042_CTR_KBDINT; + i8042_ctr |= I8042_CTR_KBDDIS; + pr_err("i8042.c: Failed to enable KBD port.\n"); + + return -EIO; + } + + return 0; +} + +void setup_wakeup_events(void) +{ + int irq_mask; + + switch (mips_machtype) { + case MACH_LEMOTE_ML2F7: + case MACH_LEMOTE_YL2F89: + /* open the keyboard irq in i8259A */ + outb((0xff & ~(1 << I8042_KBD_IRQ)), PIC_MASTER_IMR); + irq_mask = inb(PIC_MASTER_IMR); + + /* enable keyboard port */ + i8042_enable_kbd_port(); + + /* Wakeup CPU via SCI lid open event */ + outb(irq_mask & ~(1 << PIC_CASCADE_IR), PIC_MASTER_IMR); + inb(PIC_MASTER_IMR); + outb(0xff & ~(1 << (SCI_IRQ_NUM - 8)), PIC_SLAVE_IMR); + inb(PIC_SLAVE_IMR); + + break; + + default: + break; + } +} + +static struct delayed_work lid_task; +static int initialized; +/* yeeloong_report_lid_status will be implemented in yeeloong_laptop.c */ +sci_handler yeeloong_report_lid_status; +EXPORT_SYMBOL(yeeloong_report_lid_status); +static void yeeloong_lid_update_task(struct work_struct *work) +{ + if (yeeloong_report_lid_status) + yeeloong_report_lid_status(BIT_LID_DETECT_ON); +} + +int wakeup_loongson(void) +{ + int irq; + + /* query the interrupt number */ + irq = mach_i8259_irq(); + if (irq < 0) + return 0; + + printk(KERN_INFO "%s: irq = %d\n", __func__, irq); + + if (irq == I8042_KBD_IRQ) + return 1; + else if (irq == SCI_IRQ_NUM) { + int ret, sci_event; + /* query the event number */ + ret = ec_query_seq(CMD_GET_EVENT_NUM); + if (ret < 0) + return 0; + sci_event = ec_get_event_num(); + if (sci_event < 0) + return 0; + if (sci_event == EVENT_LID) { + int lid_status; + /* check the LID status */ + lid_status = ec_read(REG_LID_DETECT); + /* wakeup cpu when people open the LID */ + if (lid_status == BIT_LID_DETECT_ON) { + /* If we call it directly here, the WARNING + * will be sent out by getnstimeofday + * via "WARN_ON(timekeeping_suspended);" + * because we can not schedule in suspend mode. + */ + if (initialized == 0) { + INIT_DELAYED_WORK(&lid_task, + yeeloong_lid_update_task); + initialized = 1; + } + schedule_delayed_work(&lid_task, 1); + return 1; + } + } + } + + return 0; +} + +void __weak mach_suspend(void) +{ + disable_mfgpt0_counter(); +} + +void __weak mach_resume(void) +{ + enable_mfgpt0_counter(); +} diff --git a/arch/mips/loongson/lemote-2f/reset.c b/arch/mips/loongson/lemote-2f/reset.c new file mode 100644 index 00000000000..51d1a60d534 --- /dev/null +++ b/arch/mips/loongson/lemote-2f/reset.c @@ -0,0 +1,159 @@ +/* Board-specific reboot/shutdown routines + * + * Copyright (c) 2009 Philippe Vachon <philippe@cowpig.ca> + * + * Copyright (C) 2009 Lemote Inc. + * Author: Wu Zhangjin, wuzj@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/io.h> +#include <linux/delay.h> +#include <linux/types.h> + +#include <asm/bootinfo.h> + +#include <loongson.h> + +#include <cs5536/cs5536.h> +#include "ec_kb3310b.h" + +static void reset_cpu(void) +{ + /* + * reset cpu to full speed, this is needed when enabling cpu frequency + * scalling + */ + LOONGSON_CHIPCFG0 |= 0x7; +} + +/* reset support for fuloong2f */ + +static void fl2f_reboot(void) +{ + reset_cpu(); + + /* send a reset signal to south bridge. + * + * NOTE: if enable "Power Management" in kernel, rtl8169 will not reset + * normally with this reset operation and it will not work in PMON, but + * you can type halt command and then reboot, seems the hardware reset + * logic not work normally. + */ + { + u32 hi, lo; + _rdmsr(DIVIL_MSR_REG(DIVIL_SOFT_RESET), &hi, &lo); + lo |= 0x00000001; + _wrmsr(DIVIL_MSR_REG(DIVIL_SOFT_RESET), hi, lo); + } +} + +static void fl2f_shutdown(void) +{ + u32 hi, lo, val; + int gpio_base; + + /* get gpio base */ + _rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_GPIO), &hi, &lo); + gpio_base = lo & 0xff00; + + /* make cs5536 gpio13 output enable */ + val = inl(gpio_base + GPIOL_OUT_EN); + val &= ~(1 << (16 + 13)); + val |= (1 << 13); + outl(val, gpio_base + GPIOL_OUT_EN); + mmiowb(); + /* make cs5536 gpio13 output low level voltage. */ + val = inl(gpio_base + GPIOL_OUT_VAL) & ~(1 << (13)); + val |= (1 << (16 + 13)); + outl(val, gpio_base + GPIOL_OUT_VAL); + mmiowb(); +} + +/* reset support for yeeloong2f and mengloong2f notebook */ + +void ml2f_reboot(void) +{ + reset_cpu(); + + /* sending an reset signal to EC(embedded controller) */ + ec_write(REG_RESET, BIT_RESET_ON); +} + +#define yl2f89_reboot ml2f_reboot + +/* menglong(7inches) laptop has different shutdown logic from 8.9inches */ +#define EC_SHUTDOWN_IO_PORT_HIGH 0xff2d +#define EC_SHUTDOWN_IO_PORT_LOW 0xff2e +#define EC_SHUTDOWN_IO_PORT_DATA 0xff2f +#define REG_SHUTDOWN_HIGH 0xFC +#define REG_SHUTDOWN_LOW 0x29 +#define BIT_SHUTDOWN_ON (1 << 1) + +static void ml2f_shutdown(void) +{ + u8 val; + u64 i; + + outb(REG_SHUTDOWN_HIGH, EC_SHUTDOWN_IO_PORT_HIGH); + outb(REG_SHUTDOWN_LOW, EC_SHUTDOWN_IO_PORT_LOW); + mmiowb(); + val = inb(EC_SHUTDOWN_IO_PORT_DATA); + outb(val & (~BIT_SHUTDOWN_ON), EC_SHUTDOWN_IO_PORT_DATA); + mmiowb(); + /* need enough wait here... how many microseconds needs? */ + for (i = 0; i < 0x10000; i++) + delay(); + outb(val | BIT_SHUTDOWN_ON, EC_SHUTDOWN_IO_PORT_DATA); + mmiowb(); +} + +static void yl2f89_shutdown(void) +{ + /* cpu-gpio0 output low */ + LOONGSON_GPIODATA &= ~0x00000001; + /* cpu-gpio0 as output */ + LOONGSON_GPIOIE &= ~0x00000001; +} + +void mach_prepare_reboot(void) +{ + switch (mips_machtype) { + case MACH_LEMOTE_FL2F: + case MACH_LEMOTE_NAS: + case MACH_LEMOTE_LL2F: + fl2f_reboot(); + break; + case MACH_LEMOTE_ML2F7: + ml2f_reboot(); + break; + case MACH_LEMOTE_YL2F89: + yl2f89_reboot(); + break; + default: + break; + } +} + +void mach_prepare_shutdown(void) +{ + switch (mips_machtype) { + case MACH_LEMOTE_FL2F: + case MACH_LEMOTE_NAS: + case MACH_LEMOTE_LL2F: + fl2f_shutdown(); + break; + case MACH_LEMOTE_ML2F7: + ml2f_shutdown(); + break; + case MACH_LEMOTE_YL2F89: + yl2f89_shutdown(); + break; + default: + break; + } +} |