summaryrefslogtreecommitdiffstats
path: root/arch/mips/mips-boards/generic/mipsIRQ.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/mips-boards/generic/mipsIRQ.S')
-rw-r--r--arch/mips/mips-boards/generic/mipsIRQ.S110
1 files changed, 56 insertions, 54 deletions
diff --git a/arch/mips/mips-boards/generic/mipsIRQ.S b/arch/mips/mips-boards/generic/mipsIRQ.S
index 131f49bccb2..a397ecb872d 100644
--- a/arch/mips/mips-boards/generic/mipsIRQ.S
+++ b/arch/mips/mips-boards/generic/mipsIRQ.S
@@ -29,6 +29,20 @@
#include <asm/regdef.h>
#include <asm/stackframe.h>
+#ifdef CONFIG_MIPS_ATLAS
+#include <asm/mips-boards/atlasint.h>
+#define CASCADE_IRQ MIPSCPU_INT_ATLAS
+#define CASCADE_DISPATCH atlas_hw0_irqdispatch
+#endif
+#ifdef CONFIG_MIPS_MALTA
+#include <asm/mips-boards/maltaint.h>
+#define CASCADE_IRQ MIPSCPU_INT_I8259A
+#define CASCADE_DISPATCH malta_hw0_irqdispatch
+#endif
+#ifdef CONFIG_MIPS_SEAD
+#include <asm/mips-boards/seadint.h>
+#endif
+
/* A lot of complication here is taken away because:
*
* 1) We handle one interrupt and return, sitting in a loop and moving across
@@ -80,74 +94,62 @@
mfc0 s0, CP0_CAUSE # get irq bits
mfc0 s1, CP0_STATUS # get irq mask
+ andi s0, ST0_IM # CAUSE.CE may be non-zero!
and s0, s1
- /* First we check for r4k counter/timer IRQ. */
- andi a0, s0, CAUSEF_IP7
- beq a0, zero, 1f
- andi a0, s0, CAUSEF_IP2 # delay slot, check hw0 interrupt
+#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
+ .set mips32
+ clz a0, s0
+ .set mips0
+ negu a0
+ addu a0, 31-CAUSEB_IP
+ bltz a0, spurious
+#else
+ beqz s0, spurious
+ li a0, 7
- /* Wheee, a timer interrupt. */
- move a0, sp
- jal mips_timer_interrupt
- nop
+ and t0, s0, 0xf000
+ sltiu t0, t0, 1
+ sll t0, 2
+ subu a0, t0
+ sll s0, t0
- j ret_from_irq
- nop
+ and t0, s0, 0xc000
+ sltiu t0, t0, 1
+ sll t0, 1
+ subu a0, t0
+ sll s0, t0
-1:
-#if defined(CONFIG_MIPS_SEAD)
- beq a0, zero, 1f
- andi a0, s0, CAUSEF_IP3 # delay slot, check hw1 interrupt
-#else
- beq a0, zero, 1f # delay slot, check hw3 interrupt
- andi a0, s0, CAUSEF_IP5
+ and t0, s0, 0x8000
+ sltiu t0, t0, 1
+ # sll t0, 0
+ subu a0, t0
+ # sll s0, t0
#endif
- /* Wheee, combined hardware level zero interrupt. */
-#if defined(CONFIG_MIPS_ATLAS)
- jal atlas_hw0_irqdispatch
-#elif defined(CONFIG_MIPS_MALTA)
- jal malta_hw0_irqdispatch
-#elif defined(CONFIG_MIPS_SEAD)
- jal sead_hw0_irqdispatch
-#else
-#error "MIPS board not supported\n"
-#endif
- move a0, sp # delay slot
+#ifdef CASCADE_IRQ
+ li a1, CASCADE_IRQ
+ bne a0, a1, 1f
+ addu a0, MIPSCPU_INT_BASE
- j ret_from_irq
- nop # delay slot
+ jal CASCADE_DISPATCH
+ move a0, sp
-1:
-#if defined(CONFIG_MIPS_SEAD)
- beq a0, zero, 1f
- andi a0, s0, CAUSEF_IP5 # delay slot, check hw3 interrupt
- jal sead_hw1_irqdispatch
- move a0, sp # delay slot
- j ret_from_irq
- nop # delay slot
-1:
-#endif
-#if defined(CONFIG_MIPS_MALTA)
- beq a0, zero, 1f # check hw3 (coreHI) interrupt
- nop
- jal corehi_irqdispatch
- move a0, sp
j ret_from_irq
nop
1:
+#else
+ addu a0, MIPSCPU_INT_BASE
#endif
- /*
- * Here by mistake? This is possible, what can happen is that by the
- * time we take the exception the IRQ pin goes low, so just leave if
- * this is the case.
- */
- move a1,s0
- PRINT("Got interrupt: c0_cause = %08x\n")
- mfc0 a1, CP0_EPC
- PRINT("c0_epc = %08x\n")
+
+ jal do_IRQ
+ move a1, sp
j ret_from_irq
nop
+
+
+spurious:
+ j spurious_interrupt
+ nop
END(mipsIRQ)