9 files changed, 28 insertions, 36 deletions
diff --git a/arch/mips/momentum/Kconfig b/arch/mips/momentum/Kconfig
new file mode 100644
index 00000000000..70a61cf7174
--- /dev/null
+++ b/arch/mips/momentum/Kconfig
@@ -0,0 +1,6 @@
+config JAGUAR_DMALOW
+	bool "Low DMA Mode"
+	depends on MOMENCO_JAGUAR_ATX
+	help
+	  Select to Y if jump JP5 is set on your board, N otherwise.  Normally
+	  the jumper is set, so if you feel unsafe, just say Y.
diff --git a/arch/mips/momentum/jaguar_atx/prom.c b/arch/mips/momentum/jaguar_atx/prom.c
index 14ae2e71358..aae7a802767 100644
--- a/arch/mips/momentum/jaguar_atx/prom.c
+++ b/arch/mips/momentum/jaguar_atx/prom.c
@@ -236,8 +236,9 @@ void __init prom_init(void)
 #endif
 }
 
-void __init prom_free_prom_memory(void)
+unsigned long __init prom_free_prom_memory(void)
 {
+	return 0;
 }
 
 void __init prom_fixup_mem_map(unsigned long start, unsigned long end)
diff --git a/arch/mips/momentum/jaguar_atx/setup.c b/arch/mips/momentum/jaguar_atx/setup.c
index 90288cf2b1e..768bf440645 100644
--- a/arch/mips/momentum/jaguar_atx/setup.c
+++ b/arch/mips/momentum/jaguar_atx/setup.c
@@ -351,7 +351,7 @@ static __init int __init ja_pci_init(void)
 
 arch_initcall(ja_pci_init);
 
-static int  __init momenco_jaguar_atx_setup(void)
+void __init plat_setup(void)
 {
 	unsigned int tmpword;
 
@@ -467,8 +467,4 @@ static int  __init momenco_jaguar_atx_setup(void)
 
 	}
 #endif
-
-	return 0;
 }
-
-early_initcall(momenco_jaguar_atx_setup);
diff --git a/arch/mips/momentum/ocelot_3/prom.c b/arch/mips/momentum/ocelot_3/prom.c
index c4fa9c525fa..9803daa2a79 100644
--- a/arch/mips/momentum/ocelot_3/prom.c
+++ b/arch/mips/momentum/ocelot_3/prom.c
@@ -239,8 +239,9 @@ void __init prom_init(void)
 #endif
 }
 
-void __init prom_free_prom_memory(void)
+unsigned long __init prom_free_prom_memory(void)
 {
+	return 0;
 }
 
 void __init prom_fixup_mem_map(unsigned long start, unsigned long end)
diff --git a/arch/mips/momentum/ocelot_3/setup.c b/arch/mips/momentum/ocelot_3/setup.c
index ce2efcbab7a..a7803e08f9d 100644
--- a/arch/mips/momentum/ocelot_3/setup.c
+++ b/arch/mips/momentum/ocelot_3/setup.c
@@ -307,7 +307,7 @@ static __init int __init ja_pci_init(void)
 
 arch_initcall(ja_pci_init);
 
-static int __init momenco_ocelot_3_setup(void)
+void __init plat_setup(void)
 {
 	unsigned int tmpword;
 
@@ -391,8 +391,4 @@ static int __init momenco_ocelot_3_setup(void)
 
 	/* Support for 128 MB memory */
 	add_memory_region(0x0, 0x08000000, BOOT_MEM_RAM);
-
-	return 0;
 }
-
-early_initcall(momenco_ocelot_3_setup);
diff --git a/arch/mips/momentum/ocelot_c/cpci-irq.c b/arch/mips/momentum/ocelot_c/cpci-irq.c
index dea48b3ad68..bd885785e2f 100644
--- a/arch/mips/momentum/ocelot_c/cpci-irq.c
+++ b/arch/mips/momentum/ocelot_c/cpci-irq.c
@@ -129,14 +129,13 @@ void ll_cpci_irq(struct pt_regs *regs)
 #define shutdown_cpci_irq	disable_cpci_irq
 
 struct hw_interrupt_type cpci_irq_type = {
-	"CPCI/FPGA",
-	startup_cpci_irq,
-	shutdown_cpci_irq,
-	enable_cpci_irq,
-	disable_cpci_irq,
-	mask_and_ack_cpci_irq,
-	end_cpci_irq,
-	NULL
+	.typename = "CPCI/FPGA",
+	.startup = startup_cpci_irq,
+	.shutdown = shutdown_cpci_irq,
+	.enable = enable_cpci_irq,
+	.disable = disable_cpci_irq,
+	.ack = mask_and_ack_cpci_irq,
+	.end = end_cpci_irq,
 };
 
 void cpci_irq_init(void)
diff --git a/arch/mips/momentum/ocelot_c/setup.c b/arch/mips/momentum/ocelot_c/setup.c
index 844ddd06349..ce70fc96f16 100644
--- a/arch/mips/momentum/ocelot_c/setup.c
+++ b/arch/mips/momentum/ocelot_c/setup.c
@@ -222,7 +222,7 @@ void momenco_time_init(void)
 	rtc_set_time = m48t37y_set_time;
 }
 
-static void __init momenco_ocelot_c_setup(void)
+void __init plat_setup(void)
 {
 	unsigned int tmpword;
 
@@ -340,8 +340,6 @@ static void __init momenco_ocelot_c_setup(void)
 	}
 }
 
-early_initcall(momenco_ocelot_c_setup);
-
 #ifndef CONFIG_64BIT
 /* This needs to be one of the first initcalls, because no I/O port access
    can work before this */
diff --git a/arch/mips/momentum/ocelot_c/uart-irq.c b/arch/mips/momentum/ocelot_c/uart-irq.c
index ebe1507b17d..755bde5146b 100644
--- a/arch/mips/momentum/ocelot_c/uart-irq.c
+++ b/arch/mips/momentum/ocelot_c/uart-irq.c
@@ -122,14 +122,13 @@ void ll_uart_irq(struct pt_regs *regs)
 #define shutdown_uart_irq	disable_uart_irq
 
 struct hw_interrupt_type uart_irq_type = {
-	"UART/FPGA",
-	startup_uart_irq,
-	shutdown_uart_irq,
-	enable_uart_irq,
-	disable_uart_irq,
-	mask_and_ack_uart_irq,
-	end_uart_irq,
-	NULL
+	.typename = "UART/FPGA",
+	.startup = startup_uart_irq,
+	.shutdown = shutdown_uart_irq,
+	.enable = enable_uart_irq,
+	.disable = disable_uart_irq,
+	.ack = mask_and_ack_uart_irq,
+	.end = end_uart_irq,
 };
 
 void uart_irq_init(void)
diff --git a/arch/mips/momentum/ocelot_g/setup.c b/arch/mips/momentum/ocelot_g/setup.c
index 38a78ab8c83..6336751391c 100644
--- a/arch/mips/momentum/ocelot_g/setup.c
+++ b/arch/mips/momentum/ocelot_g/setup.c
@@ -160,7 +160,7 @@ static void __init setup_l3cache(unsigned long size)
 	printk("Done\n");
 }
 
-static int  __init momenco_ocelot_g_setup(void)
+void __init plat_setup(void)
 {
 	void (*l3func)(unsigned long) = (void *) KSEG1ADDR(setup_l3cache);
 	unsigned int tmpword;
@@ -240,12 +240,8 @@ static int  __init momenco_ocelot_g_setup(void)
 
 	/* FIXME: Fix up the DiskOnChip mapping */
 	MV_WRITE(0x468, 0xfef73);
-
-	return 0;
 }
 
-early_initcall(momenco_ocelot_g_setup);
-
 /* This needs to be one of the first initcalls, because no I/O port access
    can work before this */