diff options
Diffstat (limited to 'arch/mips/netlogic/common/smpboot.S')
| -rw-r--r-- | arch/mips/netlogic/common/smpboot.S | 194 |
1 files changed, 5 insertions, 189 deletions
diff --git a/arch/mips/netlogic/common/smpboot.S b/arch/mips/netlogic/common/smpboot.S index 02651748858..528c46c5a17 100644 --- a/arch/mips/netlogic/common/smpboot.S +++ b/arch/mips/netlogic/common/smpboot.S @@ -50,197 +50,12 @@ #include <asm/netlogic/xlp-hal/cpucontrol.h> #define CP0_EBASE $15 -#define SYS_CPU_COHERENT_BASE(node) CKSEG1ADDR(XLP_DEFAULT_IO_BASE) + \ - XLP_IO_SYS_OFFSET(node) + XLP_IO_PCI_HDRSZ + \ - SYS_CPU_NONCOHERENT_MODE * 4 - -#define XLP_AX_WORKAROUND /* enable Ax silicon workarounds */ - -/* Enable XLP features and workarounds in the LSU */ -.macro xlp_config_lsu - li t0, LSU_DEFEATURE - mfcr t1, t0 - - lui t2, 0xc080 /* SUE, Enable Unaligned Access, L2HPE */ - or t1, t1, t2 -#ifdef XLP_AX_WORKAROUND - li t2, ~0xe /* S1RCM */ - and t1, t1, t2 -#endif - mtcr t1, t0 - - li t0, ICU_DEFEATURE - mfcr t1, t0 - ori t1, 0x1000 /* Enable Icache partitioning */ - mtcr t1, t0 - - -#ifdef XLP_AX_WORKAROUND - li t0, SCHED_DEFEATURE - lui t1, 0x0100 /* Disable BRU accepting ALU ops */ - mtcr t1, t0 -#endif -.endm - -/* - * This is the code that will be copied to the reset entry point for - * XLR and XLP. The XLP cores start here when they are woken up. This - * is also the NMI entry point. - */ -.macro xlp_flush_l1_dcache - li t0, LSU_DEBUG_DATA0 - li t1, LSU_DEBUG_ADDR - li t2, 0 /* index */ - li t3, 0x1000 /* loop count */ -1: - sll v0, t2, 5 - mtcr zero, t0 - ori v1, v0, 0x3 /* way0 | write_enable | write_active */ - mtcr v1, t1 -2: - mfcr v1, t1 - andi v1, 0x1 /* wait for write_active == 0 */ - bnez v1, 2b - nop - mtcr zero, t0 - ori v1, v0, 0x7 /* way1 | write_enable | write_active */ - mtcr v1, t1 -3: - mfcr v1, t1 - andi v1, 0x1 /* wait for write_active == 0 */ - bnez v1, 3b - nop - addi t2, 1 - bne t3, t2, 1b - nop -.endm - -/* - * The cores can come start when they are woken up. This is also the NMI - * entry, so check that first. - * - * The data corresponding to reset/NMI is stored at RESET_DATA_PHYS - * location, this will have the thread mask (used when core is woken up) - * and the current NMI handler in case we reached here for an NMI. - * - * When a core or thread is newly woken up, it loops in a 'wait'. When - * the CPU really needs waking up, we send an NMI to it, with the NMI - * handler set to prom_boot_secondary_cpus - */ .set noreorder .set noat - .set arch=xlr /* for mfcr/mtcr, XLR is sufficient */ - -FEXPORT(nlm_reset_entry) - dmtc0 k0, $22, 6 - dmtc0 k1, $22, 7 - mfc0 k0, CP0_STATUS - li k1, 0x80000 - and k1, k0, k1 - beqz k1, 1f /* go to real reset entry */ - nop - li k1, CKSEG1ADDR(RESET_DATA_PHYS) /* NMI */ - ld k0, BOOT_NMI_HANDLER(k1) - jr k0 - nop - -1: /* Entry point on core wakeup */ - mfc0 t0, CP0_EBASE, 1 - mfc0 t1, CP0_EBASE, 1 - srl t1, 5 - andi t1, 0x3 /* t1 <- node */ - li t2, 0x40000 - mul t3, t2, t1 /* t3 = node * 0x40000 */ - srl t0, t0, 2 - and t0, t0, 0x7 /* t0 <- core */ - li t1, 0x1 - sll t0, t1, t0 - nor t0, t0, zero /* t0 <- ~(1 << core) */ - li t2, SYS_CPU_COHERENT_BASE(0) - add t2, t2, t3 /* t2 <- SYS offset for node */ - lw t1, 0(t2) - and t1, t1, t0 - sw t1, 0(t2) - - /* read back to ensure complete */ - lw t1, 0(t2) - sync - - /* Configure LSU on Non-0 Cores. */ - xlp_config_lsu - /* FALL THROUGH */ - -/* - * Wake up sibling threads from the initial thread in - * a core. - */ -EXPORT(nlm_boot_siblings) - /* core L1D flush before enable threads */ - xlp_flush_l1_dcache - /* Enable hw threads by writing to MAP_THREADMODE of the core */ - li t0, CKSEG1ADDR(RESET_DATA_PHYS) - lw t1, BOOT_THREAD_MODE(t0) /* t1 <- thread mode */ - li t0, ((CPU_BLOCKID_MAP << 8) | MAP_THREADMODE) - mfcr t2, t0 - or t2, t2, t1 - mtcr t2, t0 - - /* - * The new hardware thread starts at the next instruction - * For all the cases other than core 0 thread 0, we will - * jump to the secondary wait function. - */ - mfc0 v0, CP0_EBASE, 1 - andi v0, 0x3ff /* v0 <- node/core */ - - /* Init MMU in the first thread after changing THREAD_MODE - * register (Ax Errata?) - */ - andi v1, v0, 0x3 /* v1 <- thread id */ - bnez v1, 2f - nop - - li t0, MMU_SETUP - li t1, 0 - mtcr t1, t0 - _ehb - -2: beqz v0, 4f /* boot cpu (cpuid == 0)? */ - nop - - /* setup status reg */ - move t1, zero -#ifdef CONFIG_64BIT - ori t1, ST0_KX -#endif - mtc0 t1, CP0_STATUS - /* mark CPU ready */ - PTR_LA t1, nlm_cpu_ready - sll v1, v0, 2 - PTR_ADDU t1, v1 - li t2, 1 - sw t2, 0(t1) - /* Wait until NMI hits */ -3: wait - j 3b - nop - - /* - * For the boot CPU, we have to restore registers and - * return - */ -4: dmfc0 t0, $4, 2 /* restore SP from UserLocal */ - li t1, 0xfadebeef - dmtc0 t1, $4, 2 /* restore SP from UserLocal */ - PTR_SUBU sp, t0, PT_SIZE - RESTORE_ALL - jr ra - nop -EXPORT(nlm_reset_entry_end) + .set arch=xlr /* for mfcr/mtcr, XLR is sufficient */ FEXPORT(xlp_boot_core0_siblings) /* "Master" cpu starts from here */ - xlp_config_lsu dmtc0 sp, $4, 2 /* SP saved in UserLocal */ SAVE_ALL sync @@ -294,8 +109,9 @@ NESTED(nlm_rmiboot_preboot, 16, sp) andi t2, t0, 0x3 /* thread num */ sll t0, 2 /* offset in cpu array */ - PTR_LA t1, nlm_cpu_ready /* mark CPU ready */ - PTR_ADDU t1, t0 + li t3, CKSEG1ADDR(RESET_DATA_PHYS) + ADDIU t1, t3, BOOT_CPU_READY + ADDU t1, t0 li t3, 1 sw t3, 0(t1) @@ -321,7 +137,7 @@ NESTED(nlm_rmiboot_preboot, 16, sp) mtcr t1, t0 /* update core control */ 1: wait - j 1b + b 1b nop END(nlm_rmiboot_preboot) __FINIT |