summaryrefslogtreecommitdiffstats
path: root/arch/mips/pci/pci-bcm63xx.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/pci/pci-bcm63xx.c')
-rw-r--r--arch/mips/pci/pci-bcm63xx.c62
1 files changed, 31 insertions, 31 deletions
diff --git a/arch/mips/pci/pci-bcm63xx.c b/arch/mips/pci/pci-bcm63xx.c
index ca179b6ff39..88e781c6b5b 100644
--- a/arch/mips/pci/pci-bcm63xx.c
+++ b/arch/mips/pci/pci-bcm63xx.c
@@ -25,21 +25,21 @@
int bcm63xx_pci_enabled;
static struct resource bcm_pci_mem_resource = {
- .name = "bcm63xx PCI memory space",
- .start = BCM_PCI_MEM_BASE_PA,
- .end = BCM_PCI_MEM_END_PA,
- .flags = IORESOURCE_MEM
+ .name = "bcm63xx PCI memory space",
+ .start = BCM_PCI_MEM_BASE_PA,
+ .end = BCM_PCI_MEM_END_PA,
+ .flags = IORESOURCE_MEM
};
static struct resource bcm_pci_io_resource = {
- .name = "bcm63xx PCI IO space",
- .start = BCM_PCI_IO_BASE_PA,
+ .name = "bcm63xx PCI IO space",
+ .start = BCM_PCI_IO_BASE_PA,
#ifdef CONFIG_CARDBUS
- .end = BCM_PCI_IO_HALF_PA,
+ .end = BCM_PCI_IO_HALF_PA,
#else
- .end = BCM_PCI_IO_END_PA,
+ .end = BCM_PCI_IO_END_PA,
#endif
- .flags = IORESOURCE_IO
+ .flags = IORESOURCE_IO
};
struct pci_controller bcm63xx_controller = {
@@ -55,17 +55,17 @@ struct pci_controller bcm63xx_controller = {
*/
#ifdef CONFIG_CARDBUS
static struct resource bcm_cb_mem_resource = {
- .name = "bcm63xx Cardbus memory space",
- .start = BCM_CB_MEM_BASE_PA,
- .end = BCM_CB_MEM_END_PA,
- .flags = IORESOURCE_MEM
+ .name = "bcm63xx Cardbus memory space",
+ .start = BCM_CB_MEM_BASE_PA,
+ .end = BCM_CB_MEM_END_PA,
+ .flags = IORESOURCE_MEM
};
static struct resource bcm_cb_io_resource = {
- .name = "bcm63xx Cardbus IO space",
- .start = BCM_PCI_IO_HALF_PA + 1,
- .end = BCM_PCI_IO_END_PA,
- .flags = IORESOURCE_IO
+ .name = "bcm63xx Cardbus IO space",
+ .start = BCM_PCI_IO_HALF_PA + 1,
+ .end = BCM_PCI_IO_END_PA,
+ .flags = IORESOURCE_IO
};
struct pci_controller bcm63xx_cb_controller = {
@@ -76,17 +76,17 @@ struct pci_controller bcm63xx_cb_controller = {
#endif
static struct resource bcm_pcie_mem_resource = {
- .name = "bcm63xx PCIe memory space",
- .start = BCM_PCIE_MEM_BASE_PA,
- .end = BCM_PCIE_MEM_END_PA,
- .flags = IORESOURCE_MEM,
+ .name = "bcm63xx PCIe memory space",
+ .start = BCM_PCIE_MEM_BASE_PA,
+ .end = BCM_PCIE_MEM_END_PA,
+ .flags = IORESOURCE_MEM,
};
static struct resource bcm_pcie_io_resource = {
- .name = "bcm63xx PCIe IO space",
- .start = 0,
- .end = 0,
- .flags = 0,
+ .name = "bcm63xx PCIe IO space",
+ .start = 0,
+ .end = 0,
+ .flags = 0,
};
struct pci_controller bcm63xx_pcie_controller = {
@@ -111,7 +111,7 @@ static void bcm63xx_int_cfg_writel(u32 val, u32 reg)
u32 tmp;
tmp = reg & MPI_PCICFGCTL_CFGADDR_MASK;
- tmp |= MPI_PCICFGCTL_WRITEEN_MASK;
+ tmp |= MPI_PCICFGCTL_WRITEEN_MASK;
bcm_mpi_writel(tmp, MPI_PCICFGCTL_REG);
bcm_mpi_writel(val, MPI_PCICFGDATA_REG);
}
@@ -211,7 +211,7 @@ static int __init bcm63xx_register_pci(void)
* first bytes to access it from CPU.
*
* this means that no io access from CPU should happen while
- * we do a configuration cycle, but there's no way we can add
+ * we do a configuration cycle, but there's no way we can add
* a spinlock for each io access, so this is currently kind of
* broken on SMP.
*/
@@ -244,9 +244,9 @@ static int __init bcm63xx_register_pci(void)
bcm_mpi_writel(0, MPI_L2PMEMREMAP2_REG);
#endif
- /* setup local bus to PCI access (IO memory), we have only 1
- * IO window for both PCI and cardbus, but it cannot handle
- * both at the same time, assume standard PCI for now, if
+ /* setup local bus to PCI access (IO memory), we have only 1
+ * IO window for both PCI and cardbus, but it cannot handle
+ * both at the same time, assume standard PCI for now, if
* cardbus card has IO zone, PCI fixup will change window to
* cardbus */
val = BCM_PCI_IO_BASE_PA & MPI_L2P_BASE_MASK;
@@ -284,7 +284,7 @@ static int __init bcm63xx_register_pci(void)
bcm_mpi_writel(0, MPI_SP1_RANGE_REG);
}
- /* change host bridge retry counter to infinite number of
+ /* change host bridge retry counter to infinite number of
* retry, needed for some broadcom wifi cards with Silicon
* Backplane bus where access to srom seems very slow */
val = bcm63xx_int_cfg_readl(BCMPCI_REG_TIMERS);