1 files changed, 93 insertions, 0 deletions
diff --git a/arch/mips/pci/pci-ddb5476.c b/arch/mips/pci/pci-ddb5476.c
new file mode 100644
index 00000000000..90dd4950980
--- /dev/null
+++ b/arch/mips/pci/pci-ddb5476.c
@@ -0,0 +1,93 @@
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+
+#include <asm/debug.h>
+
+#include <asm/ddb5xxx/ddb5xxx.h>
+
+static struct resource extpci_io_resource = {
+	"pci IO space",
+	0x1000,			/* leave some room for ISA bus */
+	DDB_PCI_IO_SIZE - 1,
+	IORESOURCE_IO
+};
+
+static struct resource extpci_mem_resource = {
+	"pci memory space",
+	DDB_PCI_MEM_BASE + 0x00100000,	/* leave 1 MB for RTC */
+	DDB_PCI_MEM_BASE + DDB_PCI_MEM_SIZE - 1,
+	IORESOURCE_MEM
+};
+
+extern struct pci_ops ddb5476_ext_pci_ops;
+
+struct pci_controller ddb5476_controller = {
+	.pci_ops	= &ddb5476_ext_pci_ops,
+	.io_resource	= &extpci_io_resource,
+	.mem_resource	= &extpci_mem_resource
+};
+
+
+/*
+ * we fix up irqs based on the slot number.
+ * The first entry is at AD:11.
+ *
+ * This does not work for devices on sub-buses yet.
+ */
+
+/*
+ * temporary
+ */
+
+#define		PCI_EXT_INTA		8
+#define		PCI_EXT_INTB		9
+#define		PCI_EXT_INTC		10
+#define		PCI_EXT_INTD		11
+#define		PCI_EXT_INTE		12
+
+/*
+ * based on ddb5477 manual page 11
+ */
+#define		MAX_SLOT_NUM		21
+static unsigned char irq_map[MAX_SLOT_NUM] = {
+ [ 2] = 9,				/* AD:13	USB		*/
+ [ 3] = 10,				/* AD:14	PMU		*/
+ [ 5] = 0,				/* AD:16 	P2P bridge	*/
+ [ 6] = nile4_to_irq(PCI_EXT_INTB),	/* AD:17			*/
+ [ 7] =	nile4_to_irq(PCI_EXT_INTC),	/* AD:18			*/
+ [ 8] = nile4_to_irq(PCI_EXT_INTD),	/* AD:19			*/
+ [ 9] = nile4_to_irq(PCI_EXT_INTA),	/* AD:20			*/
+ [13] = 14,				/* AD:24 HD controller, M5229	*/
+};
+
+int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	return irq_map[slot];
+}
+
+/* Do platform specific device initialization at pci_enable_device() time */
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+	return 0;
+}
+
+void __init ddb_pci_reset_bus(void)
+{
+	u32 temp;
+
+	/*
+	 * I am not sure about the "official" procedure, the following
+	 * steps work as far as I know:
+	 * We first set PCI cold reset bit (bit 31) in PCICTRL-H.
+	 * Then we clear the PCI warm reset bit (bit 30) to 0 in PCICTRL-H.
+	 * The same is true for both PCI channels.
+	 */
+	temp = ddb_in32(DDB_PCICTRL + 4);
+	temp |= 0x80000000;
+	ddb_out32(DDB_PCICTRL + 4, temp);
+	temp &= ~0xc0000000;
+	ddb_out32(DDB_PCICTRL + 4, temp);
+
+}