1 files changed, 0 insertions, 93 deletions
diff --git a/arch/mips/pci/pci-ddb5476.c b/arch/mips/pci/pci-ddb5476.c
deleted file mode 100644
index 90dd4950980..00000000000
--- a/arch/mips/pci/pci-ddb5476.c
+++ /dev/null
@@ -1,93 +0,0 @@
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-
-#include <asm/debug.h>
-
-#include <asm/ddb5xxx/ddb5xxx.h>
-
-static struct resource extpci_io_resource = {
-	"pci IO space",
-	0x1000,			/* leave some room for ISA bus */
-	DDB_PCI_IO_SIZE - 1,
-	IORESOURCE_IO
-};
-
-static struct resource extpci_mem_resource = {
-	"pci memory space",
-	DDB_PCI_MEM_BASE + 0x00100000,	/* leave 1 MB for RTC */
-	DDB_PCI_MEM_BASE + DDB_PCI_MEM_SIZE - 1,
-	IORESOURCE_MEM
-};
-
-extern struct pci_ops ddb5476_ext_pci_ops;
-
-struct pci_controller ddb5476_controller = {
-	.pci_ops	= &ddb5476_ext_pci_ops,
-	.io_resource	= &extpci_io_resource,
-	.mem_resource	= &extpci_mem_resource
-};
-
-
-/*
- * we fix up irqs based on the slot number.
- * The first entry is at AD:11.
- *
- * This does not work for devices on sub-buses yet.
- */
-
-/*
- * temporary
- */
-
-#define		PCI_EXT_INTA		8
-#define		PCI_EXT_INTB		9
-#define		PCI_EXT_INTC		10
-#define		PCI_EXT_INTD		11
-#define		PCI_EXT_INTE		12
-
-/*
- * based on ddb5477 manual page 11
- */
-#define		MAX_SLOT_NUM		21
-static unsigned char irq_map[MAX_SLOT_NUM] = {
- [ 2] = 9,				/* AD:13	USB		*/
- [ 3] = 10,				/* AD:14	PMU		*/
- [ 5] = 0,				/* AD:16 	P2P bridge	*/
- [ 6] = nile4_to_irq(PCI_EXT_INTB),	/* AD:17			*/
- [ 7] =	nile4_to_irq(PCI_EXT_INTC),	/* AD:18			*/
- [ 8] = nile4_to_irq(PCI_EXT_INTD),	/* AD:19			*/
- [ 9] = nile4_to_irq(PCI_EXT_INTA),	/* AD:20			*/
- [13] = 14,				/* AD:24 HD controller, M5229	*/
-};
-
-int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-{
-	return irq_map[slot];
-}
-
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
-	return 0;
-}
-
-void __init ddb_pci_reset_bus(void)
-{
-	u32 temp;
-
-	/*
-	 * I am not sure about the "official" procedure, the following
-	 * steps work as far as I know:
-	 * We first set PCI cold reset bit (bit 31) in PCICTRL-H.
-	 * Then we clear the PCI warm reset bit (bit 30) to 0 in PCICTRL-H.
-	 * The same is true for both PCI channels.
-	 */
-	temp = ddb_in32(DDB_PCICTRL + 4);
-	temp |= 0x80000000;
-	ddb_out32(DDB_PCICTRL + 4, temp);
-	temp &= ~0xc0000000;
-	ddb_out32(DDB_PCICTRL + 4, temp);
-
-}