summaryrefslogtreecommitdiffstats
path: root/arch/mips/pci
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/pci')
-rw-r--r--arch/mips/pci/Makefile3
-rw-r--r--arch/mips/pci/fixup-atlas.c41
-rw-r--r--arch/mips/pci/fixup-au1000.c78
-rw-r--r--arch/mips/pci/fixup-cobalt.c55
-rw-r--r--arch/mips/pci/fixup-pnx8550.c57
-rw-r--r--arch/mips/pci/fixup-tx4938.c92
-rw-r--r--arch/mips/pci/ops-au1000.c14
-rw-r--r--arch/mips/pci/ops-bonito64.c14
-rw-r--r--arch/mips/pci/ops-gt64111.c10
-rw-r--r--arch/mips/pci/ops-gt64120.c10
-rw-r--r--arch/mips/pci/ops-msc.c31
-rw-r--r--arch/mips/pci/ops-nile4.c2
-rw-r--r--arch/mips/pci/ops-pnx8550.c284
-rw-r--r--arch/mips/pci/ops-tx4938.c198
-rw-r--r--arch/mips/pci/pci-bcm1480.c265
-rw-r--r--arch/mips/pci/pci-bcm1480ht.c224
-rw-r--r--arch/mips/pci/pci-ip27.c7
-rw-r--r--arch/mips/pci/pci-ip32.c4
-rw-r--r--arch/mips/pci/pci-lasat.c56
-rw-r--r--arch/mips/pci/pci.c19
20 files changed, 1277 insertions, 187 deletions
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index 83d81c9cdc2..7b746830402 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_MIPS_ITE8172) += fixup-ite8172g.o
obj-$(CONFIG_MIPS_IVR) += fixup-ivr.o
obj-$(CONFIG_SOC_AU1500) += fixup-au1000.o ops-au1000.o
obj-$(CONFIG_SOC_AU1550) += fixup-au1000.o ops-au1000.o
+obj-$(CONFIG_SOC_PNX8550) += fixup-pnx8550.o ops-pnx8550.o
obj-$(CONFIG_MIPS_MALTA) += fixup-malta.o
obj-$(CONFIG_MOMENCO_JAGUAR_ATX)+= fixup-jaguar.o
obj-$(CONFIG_MOMENCO_OCELOT) += fixup-ocelot.o pci-ocelot.o
@@ -45,11 +46,13 @@ obj-$(CONFIG_PMC_YOSEMITE) += fixup-yosemite.o ops-titan.o ops-titan-ht.o \
obj-$(CONFIG_SGI_IP27) += pci-ip27.o
obj-$(CONFIG_SGI_IP32) += fixup-ip32.o ops-mace.o pci-ip32.o
obj-$(CONFIG_SIBYTE_SB1250) += fixup-sb1250.o pci-sb1250.o
+obj-$(CONFIG_SIBYTE_BCM1x80) += pci-bcm1480.o pci-bcm1480ht.o
obj-$(CONFIG_SNI_RM200_PCI) += fixup-sni.o ops-sni.o
obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o
obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o
obj-$(CONFIG_TANBAC_TB0287) += fixup-tb0287.o
obj-$(CONFIG_TOSHIBA_JMR3927) += fixup-jmr3927.o pci-jmr3927.o
obj-$(CONFIG_TOSHIBA_RBTX4927) += fixup-rbtx4927.o ops-tx4927.o
+obj-$(CONFIG_TOSHIBA_RBTX4938) += fixup-tx4938.o ops-tx4938.o
obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o
obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o
diff --git a/arch/mips/pci/fixup-atlas.c b/arch/mips/pci/fixup-atlas.c
index 2406835833d..87920b24593 100644
--- a/arch/mips/pci/fixup-atlas.c
+++ b/arch/mips/pci/fixup-atlas.c
@@ -1,14 +1,37 @@
+/*
+ * Copyright (C) 2003, 2004 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved.
+ * Author: Maciej W. Rozycki <macro@mips.com>
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
#include <linux/config.h>
#include <linux/init.h>
#include <linux/pci.h>
+
#include <asm/mips-boards/atlasint.h>
-#define INTD ATLASINT_INTD
-#define INTC ATLASINT_INTC
-#define INTB ATLASINT_INTB
+#define PCIA ATLASINT_PCIA
+#define PCIB ATLASINT_PCIB
+#define PCIC ATLASINT_PCIC
+#define PCID ATLASINT_PCID
#define INTA ATLASINT_INTA
-#define SCSI ATLASINT_SCSI
+#define INTB ATLASINT_INTB
#define ETH ATLASINT_ETH
+#define INTC ATLASINT_INTC
+#define SCSI ATLASINT_SCSI
+#define INTD ATLASINT_INTD
static char irq_tab[][5] __initdata = {
/* INTA INTB INTC INTD */
@@ -27,13 +50,13 @@ static char irq_tab[][5] __initdata = {
{0, 0, 0, 0, 0 }, /* 12: Unused */
{0, 0, 0, 0, 0 }, /* 13: Unused */
{0, 0, 0, 0, 0 }, /* 14: Unused */
- {0, 0, 0, 0, 0 }, /* 15: Unused */
+ {0, PCIA, PCIB, PCIC, PCID }, /* 15: cPCI (behind 21150) */
{0, SCSI, 0, 0, 0 }, /* 16: SYM53C810A SCSI */
{0, 0, 0, 0, 0 }, /* 17: Core */
- {0, INTA, INTB, INTC, INTD }, /* 18: PCI Slot 1 */
- {0, ETH, 0, 0, 0 }, /* 19: SAA9730 Ethernet */
- {0, 0, 0, 0, 0 }, /* 20: PCI Slot 3 */
- {0, 0, 0, 0, 0 } /* 21: PCI Slot 4 */
+ {0, INTA, INTB, INTC, INTD }, /* 18: PCI Slot */
+ {0, ETH, 0, 0, 0 }, /* 19: SAA9730 Eth. et al. */
+ {0, 0, 0, 0, 0 }, /* 20: Unused */
+ {0, 0, 0, 0, 0 } /* 21: Unused */
};
int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
diff --git a/arch/mips/pci/fixup-au1000.c b/arch/mips/pci/fixup-au1000.c
index 39fe2b16fce..c2f8304fe55 100644
--- a/arch/mips/pci/fixup-au1000.c
+++ b/arch/mips/pci/fixup-au1000.c
@@ -26,7 +26,6 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#include <linux/config.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/kernel.h>
@@ -34,82 +33,7 @@
#include <asm/mach-au1x00/au1000.h>
-/*
- * Shortcut
- */
-#ifdef CONFIG_SOC_AU1500
-#define INTA AU1000_PCI_INTA
-#define INTB AU1000_PCI_INTB
-#define INTC AU1000_PCI_INTC
-#define INTD AU1000_PCI_INTD
-#endif
-
-#ifdef CONFIG_SOC_AU1550
-#define INTA AU1550_PCI_INTA
-#define INTB AU1550_PCI_INTB
-#define INTC AU1550_PCI_INTC
-#define INTD AU1550_PCI_INTD
-#endif
-
-#define INTX 0xFF /* not valid */
-
-#ifdef CONFIG_MIPS_DB1500
-static char irq_tab_alchemy[][5] __initdata = {
- [12] = { -1, INTA, INTX, INTX, INTX}, /* IDSEL 12 - HPT371 */
- [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot */
-};
-#endif
-
-#ifdef CONFIG_MIPS_BOSPORUS
-static char irq_tab_alchemy[][5] __initdata = {
- [11] = { -1, INTA, INTB, INTX, INTX}, /* IDSEL 11 - miniPCI */
- [12] = { -1, INTA, INTX, INTX, INTX}, /* IDSEL 12 - SN1741 */
- [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot */
-};
-#endif
-
-#ifdef CONFIG_MIPS_MIRAGE
-static char irq_tab_alchemy[][5] __initdata = {
- [11] = { -1, INTD, INTX, INTX, INTX}, /* IDSEL 11 - SMI VGX */
- [12] = { -1, INTX, INTX, INTC, INTX}, /* IDSEL 12 - PNX1300 */
- [13] = { -1, INTA, INTB, INTX, INTX}, /* IDSEL 13 - miniPCI */
-};
-#endif
-
-#ifdef CONFIG_MIPS_DB1550
-static char irq_tab_alchemy[][5] __initdata = {
- [11] = { -1, INTC, INTX, INTX, INTX}, /* IDSEL 11 - on-board HPT371 */
- [12] = { -1, INTB, INTC, INTD, INTA}, /* IDSEL 12 - PCI slot 2 (left) */
- [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot 1 (right) */
-};
-#endif
-
-#ifdef CONFIG_MIPS_PB1500
-static char irq_tab_alchemy[][5] __initdata = {
- [12] = { -1, INTA, INTX, INTX, INTX}, /* IDSEL 12 - HPT370 */
- [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot */
-};
-#endif
-
-#ifdef CONFIG_MIPS_PB1550
-static char irq_tab_alchemy[][5] __initdata = {
- [12] = { -1, INTB, INTC, INTD, INTA}, /* IDSEL 12 - PCI slot 2 (left) */
- [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot 1 (right) */
-};
-#endif
-
-#ifdef CONFIG_MIPS_MTX1
-static char irq_tab_alchemy[][5] __initdata = {
- [0] = { -1, INTA, INTB, INTX, INTX}, /* IDSEL 00 - AdapterA-Slot0 (top) */
- [1] = { -1, INTB, INTA, INTX, INTX}, /* IDSEL 01 - AdapterA-Slot1 (bottom) */
- [2] = { -1, INTC, INTD, INTX, INTX}, /* IDSEL 02 - AdapterB-Slot0 (top) */
- [3] = { -1, INTD, INTC, INTX, INTX}, /* IDSEL 03 - AdapterB-Slot1 (bottom) */
- [4] = { -1, INTA, INTB, INTX, INTX}, /* IDSEL 04 - AdapterC-Slot0 (top) */
- [5] = { -1, INTB, INTA, INTX, INTX}, /* IDSEL 05 - AdapterC-Slot1 (bottom) */
- [6] = { -1, INTC, INTD, INTX, INTX}, /* IDSEL 06 - AdapterD-Slot0 (top) */
- [7] = { -1, INTD, INTC, INTX, INTX}, /* IDSEL 07 - AdapterD-Slot1 (bottom) */
-};
-#endif
+extern char irq_tab_alchemy[][5];
int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
diff --git a/arch/mips/pci/fixup-cobalt.c b/arch/mips/pci/fixup-cobalt.c
index 57e1ca2116b..909292f50d0 100644
--- a/arch/mips/pci/fixup-cobalt.c
+++ b/arch/mips/pci/fixup-cobalt.c
@@ -21,6 +21,20 @@
extern int cobalt_board_id;
+static void qube_raq_galileo_early_fixup(struct pci_dev *dev)
+{
+ if (dev->devfn == PCI_DEVFN(0, 0) &&
+ (dev->class >> 8) == PCI_CLASS_MEMORY_OTHER) {
+
+ dev->class = (PCI_CLASS_BRIDGE_HOST << 8) | (dev->class & 0xff);
+
+ printk(KERN_INFO "Galileo: fixed bridge class\n");
+ }
+}
+
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_GT64111,
+ qube_raq_galileo_early_fixup);
+
static void qube_raq_via_bmIDE_fixup(struct pci_dev *dev)
{
unsigned short cfgword;
@@ -48,6 +62,9 @@ static void qube_raq_galileo_fixup(struct pci_dev *dev)
{
unsigned short galileo_id;
+ if (dev->devfn != PCI_DEVFN(0, 0))
+ return;
+
/* Fix PCI latency-timer and cache-line-size values in Galileo
* host bridge.
*/
@@ -55,6 +72,13 @@ static void qube_raq_galileo_fixup(struct pci_dev *dev)
pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 7);
/*
+ * The code described by the comment below has been removed
+ * as it causes bus mastering by the Ethernet controllers
+ * to break under any kind of network load. We always set
+ * the retry timeouts to their maximum.
+ *
+ * --x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--
+ *
* On all machines prior to Q2, we had the STOP line disconnected
* from Galileo to VIA on PCI. The new Galileo does not function
* correctly unless we have it connected.
@@ -64,21 +88,43 @@ static void qube_raq_galileo_fixup(struct pci_dev *dev)
*/
pci_read_config_word(dev, PCI_REVISION_ID, &galileo_id);
galileo_id &= 0xff; /* mask off class info */
+
+ printk(KERN_INFO "Galileo: revision %u\n", galileo_id);
+
+#if 0
if (galileo_id >= 0x10) {
/* New Galileo, assumes PCI stop line to VIA is connected. */
GALILEO_OUTL(0x4020, GT_PCI0_TOR_OFS);
- } else if (galileo_id == 0x1 || galileo_id == 0x2) {
+ } else if (galileo_id == 0x1 || galileo_id == 0x2)
+#endif
+ {
signed int timeo;
/* XXX WE MUST DO THIS ELSE GALILEO LOCKS UP! -DaveM */
timeo = GALILEO_INL(GT_PCI0_TOR_OFS);
/* Old Galileo, assumes PCI STOP line to VIA is disconnected. */
- GALILEO_OUTL(0xffff, GT_PCI0_TOR_OFS);
+ GALILEO_OUTL(
+ (0xff << 16) | /* retry count */
+ (0xff << 8) | /* timeout 1 */
+ 0xff, /* timeout 0 */
+ GT_PCI0_TOR_OFS);
+
+ /* enable PCI retry exceeded interrupt */
+ GALILEO_OUTL(GALILEO_INTR_RETRY_CTR | GALILEO_INL(GT_INTRMASK_OFS), GT_INTRMASK_OFS);
}
}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_GALILEO, PCI_ANY_ID,
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_GT64111,
qube_raq_galileo_fixup);
+static char irq_tab_qube1[] __initdata = {
+ [COBALT_PCICONF_CPU] = 0,
+ [COBALT_PCICONF_ETH0] = COBALT_QUBE1_ETH0_IRQ,
+ [COBALT_PCICONF_RAQSCSI] = COBALT_SCSI_IRQ,
+ [COBALT_PCICONF_VIA] = 0,
+ [COBALT_PCICONF_PCISLOT] = COBALT_QUBE_SLOT_IRQ,
+ [COBALT_PCICONF_ETH1] = 0
+};
+
static char irq_tab_cobalt[] __initdata = {
[COBALT_PCICONF_CPU] = 0,
[COBALT_PCICONF_ETH0] = COBALT_ETH0_IRQ,
@@ -99,6 +145,9 @@ static char irq_tab_raq2[] __initdata = {
int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
+ if (cobalt_board_id < COBALT_BRD_ID_QUBE2)
+ return irq_tab_qube1[slot];
+
if (cobalt_board_id == COBALT_BRD_ID_RAQ2)
return irq_tab_raq2[slot];
diff --git a/arch/mips/pci/fixup-pnx8550.c b/arch/mips/pci/fixup-pnx8550.c
new file mode 100644
index 00000000000..4256b3b30b7
--- /dev/null
+++ b/arch/mips/pci/fixup-pnx8550.c
@@ -0,0 +1,57 @@
+/*
+ * Philips PNX8550 pci fixups.
+ *
+ * Copyright 2005 Embedded Alley Solutions, Inc
+ * source@embeddealley.com
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/mach-pnx8550/pci.h>
+#include <asm/mach-pnx8550/int.h>
+
+
+#undef DEBUG
+#ifdef DEBUG
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
+extern char irq_tab_jbs[][5];
+
+void __init pcibios_fixup_resources(struct pci_dev *dev)
+{
+ /* no need to fixup IO resources */
+}
+
+void __init pcibios_fixup(void)
+{
+ /* nothing to do here */
+}
+
+int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ return irq_tab_jbs[slot][pin];
+}
+
+/* Do platform specific device initialization at pci_enable_device() time */
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+ return 0;
+}
diff --git a/arch/mips/pci/fixup-tx4938.c b/arch/mips/pci/fixup-tx4938.c
new file mode 100644
index 00000000000..f455520ada8
--- /dev/null
+++ b/arch/mips/pci/fixup-tx4938.c
@@ -0,0 +1,92 @@
+/*
+ * Toshiba rbtx4938 pci routines
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/tx4938/rbtx4938.h>
+
+extern struct pci_controller tx4938_pci_controller[];
+
+int pci_get_irq(struct pci_dev *dev, int pin)
+{
+ int irq = pin;
+ u8 slot = PCI_SLOT(dev->devfn);
+ struct pci_controller *controller = (struct pci_controller *)dev->sysdata;
+
+ if (controller == &tx4938_pci_controller[1]) {
+ /* TX4938 PCIC1 */
+ switch (slot) {
+ case TX4938_PCIC_IDSEL_AD_TO_SLOT(31):
+ if (tx4938_ccfgptr->pcfg & TX4938_PCFG_ETH0_SEL)
+ return RBTX4938_IRQ_IRC + TX4938_IR_ETH0;
+ break;
+ case TX4938_PCIC_IDSEL_AD_TO_SLOT(30):
+ if (tx4938_ccfgptr->pcfg & TX4938_PCFG_ETH1_SEL)
+ return RBTX4938_IRQ_IRC + TX4938_IR_ETH1;
+ break;
+ }
+ return 0;
+ }
+
+ /* IRQ rotation */
+ irq--; /* 0-3 */
+ if (dev->bus->parent == NULL &&
+ (slot == TX4938_PCIC_IDSEL_AD_TO_SLOT(23))) {
+ /* PCI CardSlot (IDSEL=A23) */
+ /* PCIA => PCIA (IDSEL=A23) */
+ irq = (irq + 0 + slot) % 4;
+ } else {
+ /* PCI Backplane */
+ irq = (irq + 33 - slot) % 4;
+ }
+ irq++; /* 1-4 */
+
+ switch (irq) {
+ case 1:
+ irq = RBTX4938_IRQ_IOC_PCIA;
+ break;
+ case 2:
+ irq = RBTX4938_IRQ_IOC_PCIB;
+ break;
+ case 3:
+ irq = RBTX4938_IRQ_IOC_PCIC;
+ break;
+ case 4:
+ irq = RBTX4938_IRQ_IOC_PCID;
+ break;
+ }
+ return irq;
+}
+
+int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ unsigned char irq = 0;
+
+ irq = pci_get_irq(dev, pin);
+
+ printk(KERN_INFO "PCI: 0x%02x:0x%02x(0x%02x,0x%02x) IRQ=%d\n",
+ dev->bus->number, dev->devfn, PCI_SLOT(dev->devfn),
+ PCI_FUNC(dev->devfn), irq);
+
+ return irq;
+}
+
+/*
+ * Do platform specific device initialization at pci_enable_device() time
+ */
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+ return 0;
+}
+
diff --git a/arch/mips/pci/ops-au1000.c b/arch/mips/pci/ops-au1000.c
index c1c91ca0f9c..be1420126c4 100644
--- a/arch/mips/pci/ops-au1000.c
+++ b/arch/mips/pci/ops-au1000.c
@@ -50,11 +50,6 @@
int (*board_pci_idsel)(unsigned int devsel, int assert);
-/* CP0 hazard avoidance. */
-#define BARRIER __asm__ __volatile__(".set noreorder\n\t" \
- "nop; nop; nop; nop;\t" \
- ".set reorder\n\t")
-
void mod_wired_entry(int entry, unsigned long entrylo0,
unsigned long entrylo1, unsigned long entryhi,
unsigned long pagemask)
@@ -66,16 +61,12 @@ void mod_wired_entry(int entry, unsigned long entrylo0,
old_ctx = read_c0_entryhi() & 0xff;
old_pagemask = read_c0_pagemask();
write_c0_index(entry);
- BARRIER;
write_c0_pagemask(pagemask);
write_c0_entryhi(entryhi);
write_c0_entrylo0(entrylo0);
write_c0_entrylo1(entrylo1);
- BARRIER;
tlb_write_indexed();
- BARRIER;
write_c0_entryhi(old_ctx);
- BARRIER;
write_c0_pagemask(old_pagemask);
}
@@ -128,9 +119,8 @@ static int config_access(unsigned char access_type, struct pci_bus *bus,
last_entryLo0 = last_entryLo1 = 0xffffffff;
}
- /* Since the Au1xxx doesn't do the idsel timing exactly to spec,
- * many board vendors implement their own off-chip idsel, so call
- * it now. If it doesn't succeed, may as well bail out at this point.
+ /* Allow board vendors to implement their own off-chip idsel.
+ * If it doesn't succeed, may as well bail out at this point.
*/
if (board_pci_idsel) {
if (board_pci_idsel(device, 1) == 0) {
diff --git a/arch/mips/pci/ops-bonito64.c b/arch/mips/pci/ops-bonito64.c
index 4b4e086a7eb..dc35270b65a 100644
--- a/arch/mips/pci/ops-bonito64.c
+++ b/arch/mips/pci/ops-bonito64.c
@@ -1,6 +1,8 @@
/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999, 2000 MIPS Technologies, Inc. All rights reserved.
+ * Copyright (C) 1999, 2000, 2004 MIPS Technologies, Inc.
+ * All rights reserved.
+ * Authors: Carsten Langgaard <carstenl@mips.com>
+ * Maciej W. Rozycki <macro@mips.com>
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
@@ -17,7 +19,6 @@
*
* MIPS boards specific PCI support.
*/
-#include <linux/config.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/kernel.h>
@@ -57,13 +58,6 @@ static int bonito64_pcibios_config_access(unsigned char access_type,
return -1;
}
-#ifdef CONFIG_MIPS_BOARDS_GEN
- if ((busnum == 0) && (PCI_SLOT(devfn) == 17)) {
- /* MIPS Core boards have Bonito connected as device 17 */
- return -1;
- }
-#endif
-
/* Clear cause register bits */
BONITO_PCICMD |= (BONITO_PCICMD_MABORT_CLR |
BONITO_PCICMD_MTABORT_CLR);
diff --git a/arch/mips/pci/ops-gt64111.c b/arch/mips/pci/ops-gt64111.c
index c5b0fc184c2..c1807934768 100644
--- a/arch/mips/pci/ops-gt64111.c
+++ b/arch/mips/pci/ops-gt64111.c
@@ -18,15 +18,15 @@
#include <asm/cobalt/cobalt.h>
/*
- * Accessing device 31 hangs the GT64120. Not sure if this will also hang
- * the GT64111, let's be paranoid for now.
+ * Device 31 on the GT64111 is used to generate PCI special
+ * cycles, so we shouldn't expected to find a device there ...
*/
static inline int pci_range_ck(struct pci_bus *bus, unsigned int devfn)
{
- if (bus->number == 0 && devfn == PCI_DEVFN(31, 0))
- return -1;
+ if (bus->number == 0 && PCI_SLOT(devfn) < 31)
+ return 0;
- return 0;
+ return -1;
}
static int gt64111_pci_read_config(struct pci_bus *bus, unsigned int devfn,
diff --git a/arch/mips/pci/ops-gt64120.c b/arch/mips/pci/ops-gt64120.c
index 7b99dfa33df..6335844d607 100644
--- a/arch/mips/pci/ops-gt64120.c
+++ b/arch/mips/pci/ops-gt64120.c
@@ -1,6 +1,8 @@
/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999, 2000 MIPS Technologies, Inc. All rights reserved.
+ * Copyright (C) 1999, 2000, 2004 MIPS Technologies, Inc.
+ * All rights reserved.
+ * Authors: Carsten Langgaard <carstenl@mips.com>
+ * Maciej W. Rozycki <macro@mips.com>
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
@@ -43,10 +45,6 @@ static int gt64120_pcibios_config_access(unsigned char access_type,
unsigned char busnum = bus->number;
u32 intr;
- if ((busnum == 0) && (PCI_SLOT(devfn) == 0))
- /* Galileo itself is devfn 0, don't move it around */
- return -1;
-
if ((busnum == 0) && (devfn >= PCI_DEVFN(31, 0)))
return -1; /* Because of a bug in the galileo (for slot 31). */
diff --git a/arch/mips/pci/ops-msc.c b/arch/mips/pci/ops-msc.c
index 7bc099643a9..5d9fbb0f467 100644
--- a/arch/mips/pci/ops-msc.c
+++ b/arch/mips/pci/ops-msc.c
@@ -21,7 +21,6 @@
* MIPS boards specific PCI support.
*
*/
-#include <linux/config.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/kernel.h>
@@ -49,34 +48,17 @@ static int msc_pcibios_config_access(unsigned char access_type,
struct pci_bus *bus, unsigned int devfn, int where, u32 * data)
{
unsigned char busnum = bus->number;
- unsigned char type;
u32 intr;
-#ifdef CONFIG_MIPS_BOARDS_GEN
- if ((busnum == 0) && (PCI_SLOT(devfn) == 17)) {
- /* MIPS Core boards have SOCit connected as device 17 */
- return -1;
- }
-#endif
-
/* Clear status register bits. */
MSC_WRITE(MSC01_PCI_INTSTAT,
(MSC01_PCI_INTCFG_MA_BIT | MSC01_PCI_INTCFG_TA_BIT));
- /* Setup address */
- if (busnum == 0)
- type = 0; /* Type 0 */
- else
- type = 1; /* Type 1 */
-
MSC_WRITE(MSC01_PCI_CFGADDR,
((busnum << MSC01_PCI_CFGADDR_BNUM_SHF) |
- (PCI_SLOT(devfn) << MSC01_PCI_CFGADDR_DNUM_SHF)
- | (PCI_FUNC(devfn) <<
- MSC01_PCI_CFGADDR_FNUM_SHF) | ((where /
- 4) <<
- MSC01_PCI_CFGADDR_RNUM_SHF)
- | (type)));
+ (PCI_SLOT(devfn) << MSC01_PCI_CFGADDR_DNUM_SHF) |
+ (PCI_FUNC(devfn) << MSC01_PCI_CFGADDR_FNUM_SHF) |
+ ((where / 4) << MSC01_PCI_CFGADDR_RNUM_SHF)));
/* Perform access */
if (access_type == PCI_ACCESS_WRITE)
@@ -86,15 +68,12 @@ static int msc_pcibios_config_access(unsigned char access_type,
/* Detect Master/Target abort */
MSC_READ(MSC01_PCI_INTSTAT, intr);
- if (intr & (MSC01_PCI_INTCFG_MA_BIT |
- MSC01_PCI_INTCFG_TA_BIT)) {
+ if (intr & (MSC01_PCI_INTCFG_MA_BIT | MSC01_PCI_INTCFG_TA_BIT)) {
/* Error occurred */
/* Clear bits */
- MSC_READ(MSC01_PCI_INTSTAT, intr);
MSC_WRITE(MSC01_PCI_INTSTAT,
- (MSC01_PCI_INTCFG_MA_BIT |
- MSC01_PCI_INTCFG_TA_BIT));
+ (MSC01_PCI_INTCFG_MA_BIT | MSC01_PCI_INTCFG_TA_BIT));
return -1;
}
diff --git a/arch/mips/pci/ops-nile4.c b/arch/mips/pci/ops-nile4.c
index a7169928b35..a8d38dc8c50 100644
--- a/arch/mips/pci/ops-nile4.c
+++ b/arch/mips/pci/ops-nile4.c
@@ -15,7 +15,7 @@
volatile unsigned long *const vrc_pciregs = (void *) Vrc5074_BASE;
-static spinlock_t nile4_pci_lock;
+static DEFINE_SPINLOCK(nile4_pci_lock);
static int nile4_pcibios_config_access(unsigned char access_type,
struct pci_bus *bus, unsigned int devfn, int where, u32 * val)
diff --git a/arch/mips/pci/ops-pnx8550.c b/arch/mips/pci/ops-pnx8550.c
new file mode 100644
index 00000000000..454b65cc335
--- /dev/null
+++ b/arch/mips/pci/ops-pnx8550.c
@@ -0,0 +1,284 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *
+ * 2.6 port, Embedded Alley Solutions, Inc
+ *
+ * Based on:
+ * Author: source@mvista.com
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/vmalloc.h>
+#include <linux/delay.h>
+
+#include <asm/mach-pnx8550/pci.h>
+#include <asm/mach-pnx8550/glb.h>
+#include <asm/debug.h>
+
+
+static inline void clear_status(void)
+{
+ unsigned long pci_stat;
+
+ pci_stat = inl(PCI_BASE | PCI_GPPM_STATUS);
+ outl(pci_stat, PCI_BASE | PCI_GPPM_ICLR);
+}
+
+static inline unsigned int
+calc_cfg_addr(struct pci_bus *bus, unsigned int devfn, int where)
+{
+ unsigned int addr;
+
+ addr = ((bus->number > 0) ? (((bus->number & 0xff) << PCI_CFG_BUS_SHIFT) | 1) : 0);
+ addr |= ((devfn & 0xff) << PCI_CFG_FUNC_SHIFT) | (where & 0xfc);
+
+ return addr;
+}
+
+static int
+config_access(unsigned int pci_cmd, struct pci_bus *bus, unsigned int devfn, int where, unsigned int pci_mode, unsigned int *val)
+{
+ unsigned int flags;
+ unsigned long loops = 0;
+ unsigned long ioaddr = calc_cfg_addr(bus, devfn, where);
+
+ local_irq_save(flags);
+ /*Clear pending interrupt status */
+ if (inl(PCI_BASE | PCI_GPPM_STATUS)) {
+ clear_status();
+ while (!(inl(PCI_BASE | PCI_GPPM_STATUS) == 0)) ;
+ }
+
+ outl(ioaddr, PCI_BASE | PCI_GPPM_ADDR);
+
+ if ((pci_cmd == PCI_CMD_IOW) || (pci_cmd == PCI_CMD_CONFIG_WRITE))
+ outl(*val, PCI_BASE | PCI_GPPM_WDAT);
+
+ outl(INIT_PCI_CYCLE | pci_cmd | (pci_mode & PCI_BYTE_ENABLE_MASK),
+ PCI_BASE | PCI_GPPM_CTRL);
+
+ loops =
+ ((loops_per_jiffy *
+ PCI_IO_JIFFIES_TIMEOUT) >> (PCI_IO_JIFFIES_SHIFT));
+ while (1) {
+ if (inl(PCI_BASE | PCI_GPPM_STATUS) & GPPM_DONE) {
+ if ((pci_cmd == PCI_CMD_IOR) ||
+ (pci_cmd == PCI_CMD_CONFIG_READ))
+ *val = inl(PCI_BASE | PCI_GPPM_RDAT);
+ clear_status();
+ local_irq_restore(flags);
+ return PCIBIOS_SUCCESSFUL;
+ } else if (inl(PCI_BASE | PCI_GPPM_STATUS) & GPPM_R_MABORT) {
+ break;
+ }
+
+ loops--;
+ if (loops == 0) {
+ printk("%s : Arbiter Locked.\n", __FUNCTION__);
+ }
+ }
+
+ clear_status();
+ if ((pci_cmd == PCI_CMD_IOR) || (pci_cmd == PCI_CMD_IOW)) {
+ printk("%s timeout (GPPM_CTRL=%X) ioaddr %lX pci_cmd %X\n",
+ __FUNCTION__, inl(PCI_BASE | PCI_GPPM_CTRL), ioaddr,
+ pci_cmd);
+ }
+
+ if ((pci_cmd == PCI_CMD_IOR) || (pci_cmd == PCI_CMD_CONFIG_READ))
+ *val = 0xffffffff;
+ local_irq_restore(flags);
+ return PCIBIOS_DEVICE_NOT_FOUND;
+}
+
+/*
+ * We can't address 8 and 16 bit words directly. Instead we have to
+ * read/write a 32bit word and mask/modify the data we actually want.
+ */
+static int
+read_config_byte(struct pci_bus *bus, unsigned int devfn, int where, u8 * val)
+{
+ unsigned int data = 0;
+ int err;
+
+ if (bus == 0)
+ return -1;
+
+ err = config_access(PCI_CMD_CONFIG_READ, bus, devfn, where, ~(1 << (where & 3)), &data);
+ switch (where & 0x03) {
+ case 0:
+ *val = (unsigned char)(data & 0x000000ff);
+ break;
+ case 1:
+ *val = (unsigned char)((data & 0x0000ff00) >> 8);
+ break;
+ case 2:
+ *val = (unsigned char)((data & 0x00ff0000) >> 16);
+ break;
+ case 3:
+ *val = (unsigned char)((data & 0xff000000) >> 24);
+ break;
+ }
+
+ return err;
+}
+
+static int
+read_config_word(struct pci_bus *bus, unsigned int devfn, int where, u16 * val)
+{
+ unsigned int data = 0;
+ int err;
+
+ if (bus == 0)
+ return -1;
+
+ if (where & 0x01)
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ err = config_access(PCI_CMD_CONFIG_READ, bus, devfn, where, ~(3 << (where & 3)), &data);
+ switch (where & 0x02) {
+ case 0:
+ *val = (unsigned short)(data & 0x0000ffff);
+ break;
+ case 2:
+ *val = (unsigned short)((data & 0xffff0000) >> 16);
+ break;
+ }
+
+ return err;
+}
+
+static int
+read_config_dword(struct pci_bus *bus, unsigned int devfn, int where, u32 * val)
+{
+ int err;
+ if (bus == 0)
+ return -1;
+
+ if (where & 0x03)
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ err = config_access(PCI_CMD_CONFIG_READ, bus, devfn, where, 0, val);
+
+ return err;
+}
+
+static int
+write_config_byte(struct pci_bus *bus, unsigned int devfn, int where, u8 val)
+{
+ unsigned int data = (unsigned int)val;
+ int err;
+
+ if (bus == 0)
+ return -1;
+
+ switch (where & 0x03) {
+ case 1:
+ data = (data << 8);
+ break;
+ case 2:
+ data = (data << 16);
+ break;
+ case 3:
+ data = (data << 24);
+ break;
+ default:
+ break;
+ }
+
+ err = config_access(PCI_CMD_CONFIG_READ, bus, devfn, where, ~(1 << (where & 3)), &data);
+
+ return err;
+}
+
+static int
+write_config_word(struct pci_bus *bus, unsigned int devfn, int where, u16 val)
+{
+ unsigned int data = (unsigned int)val;
+ int err;
+
+ if (bus == 0)
+ return -1;
+
+ if (where & 0x01)
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ switch (where & 0x02) {
+ case 2:
+ data = (data << 16);
+ break;
+ default:
+ break;
+ }
+ err = config_access(PCI_CMD_CONFIG_WRITE, bus, devfn, where, ~(3 << (where & 3)), &data);
+
+ return err;
+}
+
+static int
+write_config_dword(struct pci_bus *bus, unsigned int devfn, int where, u32 val)
+{
+ int err;
+ if (bus == 0)
+ return -1;
+
+ if (where & 0x03)
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ err = config_access(PCI_CMD_CONFIG_WRITE, bus, devfn, where, 0, &val);
+
+ return err;
+}
+
+static int config_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * val)
+{
+ switch (size) {
+ case 1: {
+ u8 _val;
+ int rc = read_config_byte(bus, devfn, where, &_val);
+ *val = _val;
+ return rc;
+ }
+ case 2: {
+ u16 _val;
+ int rc = read_config_word(bus, devfn, where, &_val);
+ *val = _val;
+ return rc;
+ }
+ default:
+ return read_config_dword(bus, devfn, where, val);
+ }
+}
+
+static int config_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val)
+{
+ switch (size) {
+ case 1:
+ return write_config_byte(bus, devfn, where, (u8) val);
+ case 2:
+ return write_config_word(bus, devfn, where, (u16) val);
+ default:
+ return write_config_dword(bus, devfn, where, val);
+ }
+}
+
+struct pci_ops pnx8550_pci_ops = {
+ config_read,
+ config_write
+};
diff --git a/arch/mips/pci/ops-tx4938.c b/arch/mips/pci/ops-tx4938.c
new file mode 100644
index 00000000000..4c0dcfce529
--- /dev/null
+++ b/arch/mips/pci/ops-tx4938.c
@@ -0,0 +1,198 @@
+/*
+ * Define the pci_ops for the Toshiba rbtx4938
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/addrspace.h>
+#include <asm/tx4938/rbtx4938.h>
+
+/* initialize in setup */
+struct resource pci_io_resource = {
+ .name = "pci IO space",
+ .start = 0,
+ .end = 0,
+ .flags = IORESOURCE_IO
+};
+
+/* initialize in setup */
+struct resource pci_mem_resource = {
+ .name = "pci memory space",
+ .start = 0,
+ .end = 0,
+ .flags = IORESOURCE_MEM
+};
+
+struct resource tx4938_pcic1_pci_io_resource = {
+ .name = "PCI1 IO",
+ .start = 0,
+ .end = 0,
+ .flags = IORESOURCE_IO
+};
+struct resource tx4938_pcic1_pci_mem_resource = {
+ .name = "PCI1 mem",
+ .start = 0,
+ .end = 0,
+ .flags = IORESOURCE_MEM
+};
+
+static int mkaddr(int bus, int dev_fn, int where, int *flagsp)
+{
+ if (bus > 0) {
+ /* Type 1 configuration */
+ tx4938_pcicptr->g2pcfgadrs = ((bus & 0xff) << 0x10) |
+ ((dev_fn & 0xff) << 0x08) | (where & 0xfc) | 1;
+ } else {
+ if (dev_fn >= PCI_DEVFN(TX4938_PCIC_MAX_DEVNU, 0))
+ return -1;
+
+ /* Type 0 configuration */
+ tx4938_pcicptr->g2pcfgadrs = ((bus & 0xff) << 0x10) |
+ ((dev_fn & 0xff) << 0x08) | (where & 0xfc);
+ }
+ /* clear M_ABORT and Disable M_ABORT Int. */
+ tx4938_pcicptr->pcistatus =
+ (tx4938_pcicptr->pcistatus & 0x0000ffff) |
+ (PCI_STATUS_REC_MASTER_ABORT << 16);
+ tx4938_pcicptr->pcimask &= ~PCI_STATUS_REC_MASTER_ABORT;
+
+ return 0;
+}
+
+static int check_abort(int flags)
+{
+ int code = PCIBIOS_SUCCESSFUL;
+ /* wait write cycle completion before checking error status */
+ while (tx4938_pcicptr->pcicstatus & TX4938_PCIC_PCICSTATUS_IWB)
+ ;
+ if (tx4938_pcicptr->pcistatus & (PCI_STATUS_REC_MASTER_ABORT << 16)) {
+ tx4938_pcicptr->pcistatus =
+ (tx4938_pcicptr->
+ pcistatus & 0x0000ffff) | (PCI_STATUS_REC_MASTER_ABORT
+ << 16);
+ tx4938_pcicptr->pcimask |= PCI_STATUS_REC_MASTER_ABORT;
+ code = PCIBIOS_DEVICE_NOT_FOUND;
+ }
+ return code;
+}
+
+static int tx4938_pcibios_read_config(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 * val)
+{
+ int flags, retval, dev, busno, func;
+
+ dev = PCI_SLOT(devfn);
+ func = PCI_FUNC(devfn);
+
+ /* check if the bus is top-level */
+ if (bus->parent != NULL)
+ busno = bus->number;
+ else {
+ busno = 0;
+ }
+
+ if (mkaddr(busno, devfn, where, &flags))
+ return -1;
+
+ switch (size) {
+ case 1:
+ *val = *(volatile u8 *) ((ulong) & tx4938_pcicptr->g2pcfgdata |
+#ifdef __BIG_ENDIAN
+ ((where & 3) ^ 3));
+#else
+ (where & 3));
+#endif
+ break;
+ case 2:
+ *val = *(volatile u16 *) ((ulong) & tx4938_pcicptr->g2pcfgdata |
+#ifdef __BIG_ENDIAN
+ ((where & 3) ^ 2));
+#else
+ (where & 3));
+#endif
+ break;
+ case 4:
+ *val = tx4938_pcicptr->g2pcfgdata;
+ break;
+ }
+
+ retval = check_abort(flags);
+ if (retval == PCIBIOS_DEVICE_NOT_FOUND)
+ *val = 0xffffffff;
+
+ return retval;
+}
+
+static int tx4938_pcibios_write_config(struct pci_bus *bus, unsigned int devfn, int where,
+ int size, u32 val)
+{
+ int flags, dev, busno, func;
+
+ busno = bus->number;
+ dev = PCI_SLOT(devfn);
+ func = PCI_FUNC(devfn);
+
+ /* check if the bus is top-level */
+ if (bus->parent != NULL) {
+ busno = bus->number;
+ } else {
+ busno = 0;
+ }
+
+ if (mkaddr(busno, devfn, where, &flags))
+ return -1;
+
+ switch (size) {
+ case 1:
+ *(volatile u8 *) ((ulong) & tx4938_pcicptr->g2pcfgdata |
+#ifdef __BIG_ENDIAN
+ ((where & 3) ^ 3)) = val;
+#else
+ (where & 3)) = val;
+#endif
+ break;
+ case 2:
+ *(volatile u16 *) ((ulong) & tx4938_pcicptr->g2pcfgdata |
+#ifdef __BIG_ENDIAN
+ ((where & 0x3) ^ 0x2)) = val;
+#else
+ (where & 3)) = val;
+#endif
+ break;
+ case 4:
+ tx4938_pcicptr->g2pcfgdata = val;
+ break;
+ }
+
+ return check_abort(flags);
+}
+
+struct pci_ops tx4938_pci_ops = {
+ tx4938_pcibios_read_config,
+ tx4938_pcibios_write_config
+};
+
+struct pci_controller tx4938_pci_controller[] = {
+ /* h/w only supports devices 0x00 to 0x14 */
+ {
+ .pci_ops = &tx4938_pci_ops,
+ .io_resource = &pci_io_resource,
+ .mem_resource = &pci_mem_resource,
+ },
+ /* h/w only supports devices 0x00 to 0x14 */
+ {
+ .pci_ops = &tx4938_pci_ops,
+ .io_resource = &tx4938_pcic1_pci_io_resource,
+ .mem_resource = &tx4938_pcic1_pci_mem_resource,
+ }
+};
diff --git a/arch/mips/pci/pci-bcm1480.c b/arch/mips/pci/pci-bcm1480.c
new file mode 100644
index 00000000000..f194b4e4f86
--- /dev/null
+++ b/arch/mips/pci/pci-bcm1480.c
@@ -0,0 +1,265 @@
+/*
+ * Copyright (C) 2001,2002,2005 Broadcom Corporation
+ * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+ * BCM1x80/1x55-specific PCI support
+ *
+ * This module provides the glue between Linux's PCI subsystem
+ * and the hardware. We basically provide glue for accessing
+ * configuration space, and set up the translation for I/O
+ * space accesses.
+ *
+ * To access configuration space, we use ioremap. In the 32-bit
+ * kernel, this consumes either 4 or 8 page table pages, and 16MB of
+ * kernel mapped memory. Hopefully neither of these should be a huge
+ * problem.
+ *
+ * XXX: AT THIS TIME, ONLY the NATIVE PCI-X INTERFACE IS SUPPORTED.
+ */
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/console.h>
+#include <linux/tty.h>
+
+#include <asm/sibyte/bcm1480_regs.h>
+#include <asm/sibyte/bcm1480_scd.h>
+#include <asm/sibyte/board.h>
+#include <asm/io.h>
+
+/*
+ * Macros for calculating offsets into config space given a device
+ * structure or dev/fun/reg
+ */
+#define CFGOFFSET(bus,devfn,where) (((bus)<<16)+((devfn)<<8)+(where))
+#define CFGADDR(bus,devfn,where) CFGOFFSET((bus)->number,(devfn),where)
+
+static void *cfg_space;
+
+#define PCI_BUS_ENABLED 1
+#define PCI_DEVICE_MODE 2
+
+static int bcm1480_bus_status = 0;
+
+#define PCI_BRIDGE_DEVICE 0
+
+/*
+ * Read/write 32-bit values in config space.
+ */
+static inline u32 READCFG32(u32 addr)
+{
+ return *(u32 *)(cfg_space + (addr&~3));
+}
+
+static inline void WRITECFG32(u32 addr, u32 data)
+{
+ *(u32 *)(cfg_space + (addr & ~3)) = data;
+}
+
+int pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ return dev->irq;
+}
+
+/* Do platform specific device initialization at pci_enable_device() time */
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+ return 0;
+}
+
+/*
+ * Some checks before doing config cycles:
+ * In PCI Device Mode, hide everything on bus 0 except the LDT host
+ * bridge. Otherwise, access is controlled by bridge MasterEn bits.
+ */
+static int bcm1480_pci_can_access(struct pci_bus *bus, int devfn)
+{
+ u32 devno;
+
+ if (!(bcm1480_bus_status & (PCI_BUS_ENABLED | PCI_DEVICE_MODE)))
+ return 0;
+
+ if (bus->number == 0) {
+ devno = PCI_SLOT(devfn);
+ if (bcm1480_bus_status & PCI_DEVICE_MODE)
+ return 0;
+ else
+ return 1;
+ } else
+ return 1;
+}
+
+/*
+ * Read/write access functions for various sizes of values
+ * in config space. Return all 1's for disallowed accesses
+ * for a kludgy but adequate simulation of master aborts.
+ */
+
+static int bcm1480_pcibios_read(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 * val)
+{
+ u32 data = 0;
+
+ if ((size == 2) && (where & 1))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ else if ((size == 4) && (where & 3))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ if (bcm1480_pci_can_access(bus, devfn))
+ data = READCFG32(CFGADDR(bus, devfn, where));
+ else
+ data = 0xFFFFFFFF;
+
+ if (size == 1)
+ *val = (data >> ((where & 3) << 3)) & 0xff;
+ else if (size == 2)
+ *val = (data >> ((where & 3) << 3)) & 0xffff;
+ else
+ *val = data;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int bcm1480_pcibios_write(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 val)
+{
+ u32 cfgaddr = CFGADDR(bus, devfn, where);
+ u32 data = 0;
+
+ if ((size == 2) && (where & 1))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ else if ((size == 4) && (where & 3))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ if (!bcm1480_pci_can_access(bus, devfn))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ data = READCFG32(cfgaddr);
+
+ if (size == 1)
+ data = (data & ~(0xff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+ else if (size == 2)
+ data = (data & ~(0xffff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+ else
+ data = val;
+
+ WRITECFG32(cfgaddr, data);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops bcm1480_pci_ops = {
+ bcm1480_pcibios_read,
+ bcm1480_pcibios_write,
+};
+
+static struct resource bcm1480_mem_resource = {
+ .name = "BCM1480 PCI MEM",
+ .start = 0x30000000UL,
+ .end = 0x3fffffffUL,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct resource bcm1480_io_resource = {
+ .name = "BCM1480 PCI I/O",
+ .start = 0x2c000000UL,
+ .end = 0x2dffffffUL,
+ .flags = IORESOURCE_IO,
+};
+
+struct pci_controller bcm1480_controller = {
+ .pci_ops = &bcm1480_pci_ops,
+ .mem_resource = &bcm1480_mem_resource,
+ .io_resource = &bcm1480_io_resource,
+};
+
+
+static int __init bcm1480_pcibios_init(void)
+{
+ uint32_t cmdreg;
+ uint64_t reg;
+ extern int pci_probe_only;
+
+ /* CFE will assign PCI resources */
+ pci_probe_only = 1;
+
+ /* Avoid ISA compat ranges. */
+ PCIBIOS_MIN_IO = 0x00008000UL;
+ PCIBIOS_MIN_MEM = 0x01000000UL;
+
+ /* Set I/O resource limits. - unlimited for now to accomodate HT */
+ ioport_resource.end = 0xffffffffUL;
+ iomem_resource.end = 0xffffffffUL;
+
+ cfg_space = ioremap(A_BCM1480_PHYS_PCI_CFG_MATCH_BITS, 16*1024*1024);
+
+ /*
+ * See if the PCI bus has been configured by the firmware.
+ */
+ reg = *((volatile uint64_t *) IOADDR(A_SCD_SYSTEM_CFG));
+ if (!(reg & M_BCM1480_SYS_PCI_HOST)) {
+ bcm1480_bus_status |= PCI_DEVICE_MODE;
+ } else {
+ cmdreg = READCFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0),
+ PCI_COMMAND));
+ if (!(cmdreg & PCI_COMMAND_MASTER)) {
+ printk
+ ("PCI: Skipping PCI probe. Bus is not initialized.\n");
+ iounmap(cfg_space);
+ return 1; /* XXX */
+ }
+ bcm1480_bus_status |= PCI_BUS_ENABLED;
+ }
+
+ /* turn on ExpMemEn */
+ cmdreg = READCFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0), 0x40));
+ printk("PCIFeatureCtrl = %x\n", cmdreg);
+ WRITECFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0), 0x40),
+ cmdreg | 0x10);
+ cmdreg = READCFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0), 0x40));
+ printk("PCIFeatureCtrl = %x\n", cmdreg);
+
+ /*
+ * Establish mappings in KSEG2 (kernel virtual) to PCI I/O
+ * space. Use "match bytes" policy to make everything look
+ * little-endian. So, you need to also set
+ * CONFIG_SWAP_IO_SPACE, but this is the combination that
+ * works correctly with most of Linux's drivers.
+ * XXX ehs: Should this happen in PCI Device mode?
+ */
+
+ set_io_port_base((unsigned long)
+ ioremap(A_BCM1480_PHYS_PCI_IO_MATCH_BYTES, 65536));
+ isa_slot_offset = (unsigned long)
+ ioremap(A_BCM1480_PHYS_PCI_MEM_MATCH_BYTES, 1024*1024);
+
+ register_pci_controller(&bcm1480_controller);
+
+#ifdef CONFIG_VGA_CONSOLE
+ take_over_console(&vga_con,0,MAX_NR_CONSOLES-1,1);
+#endif
+ return 0;
+}
+
+arch_initcall(bcm1480_pcibios_init);
diff --git a/arch/mips/pci/pci-bcm1480ht.c b/arch/mips/pci/pci-bcm1480ht.c
new file mode 100644
index 00000000000..aca4a2e7a1c
--- /dev/null
+++ b/arch/mips/pci/pci-bcm1480ht.c
@@ -0,0 +1,224 @@
+/*
+ * Copyright (C) 2001,2002,2005 Broadcom Corporation
+ * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+ * BCM1480/1455-specific HT support (looking like PCI)
+ *
+ * This module provides the glue between Linux's PCI subsystem
+ * and the hardware. We basically provide glue for accessing
+ * configuration space, and set up the translation for I/O
+ * space accesses.
+ *
+ * To access configuration space, we use ioremap. In the 32-bit
+ * kernel, this consumes either 4 or 8 page table pages, and 16MB of
+ * kernel mapped memory. Hopefully neither of these should be a huge
+ * problem.
+ *
+ */
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/console.h>
+#include <linux/tty.h>
+
+#include <asm/sibyte/bcm1480_regs.h>
+#include <asm/sibyte/bcm1480_scd.h>
+#include <asm/sibyte/board.h>
+#include <asm/io.h>
+
+/*
+ * Macros for calculating offsets into config space given a device
+ * structure or dev/fun/reg
+ */
+#define CFGOFFSET(bus,devfn,where) (((bus)<<16)+((devfn)<<8)+(where))
+#define CFGADDR(bus,devfn,where) CFGOFFSET((bus)->number,(devfn),where)
+
+static void *ht_cfg_space;
+
+#define PCI_BUS_ENABLED 1
+#define PCI_DEVICE_MODE 2
+
+static int bcm1480ht_bus_status = 0;
+
+#define PCI_BRIDGE_DEVICE 0
+#define HT_BRIDGE_DEVICE 1
+
+/*
+ * HT's level-sensitive interrupts require EOI, which is generated
+ * through a 4MB memory-mapped region
+ */
+unsigned long ht_eoi_space;
+
+/*
+ * Read/write 32-bit values in config space.
+ */
+static inline u32 READCFG32(u32 addr)
+{
+ return *(u32 *)(ht_cfg_space + (addr&~3));
+}
+
+static inline void WRITECFG32(u32 addr, u32 data)
+{
+ *(u32 *)(ht_cfg_space + (addr & ~3)) = data;
+}
+
+/*
+ * Some checks before doing config cycles:
+ * In PCI Device Mode, hide everything on bus 0 except the LDT host
+ * bridge. Otherwise, access is controlled by bridge MasterEn bits.
+ */
+static int bcm1480ht_can_access(struct pci_bus *bus, int devfn)
+{
+ u32 devno;
+
+ if (!(bcm1480ht_bus_status & (PCI_BUS_ENABLED | PCI_DEVICE_MODE)))
+ return 0;
+
+ if (bus->number == 0) {
+ devno = PCI_SLOT(devfn);
+ if (bcm1480ht_bus_status & PCI_DEVICE_MODE)
+ return 0;
+ }
+ return 1;
+}
+
+/*
+ * Read/write access functions for various sizes of values
+ * in config space. Return all 1's for disallowed accesses
+ * for a kludgy but adequate simulation of master aborts.
+ */
+
+static int bcm1480ht_pcibios_read(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 * val)
+{
+ u32 data = 0;
+
+ if ((size == 2) && (where & 1))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ else if ((size == 4) && (where & 3))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ if (bcm1480ht_can_access(bus, devfn))
+ data = READCFG32(CFGADDR(bus, devfn, where));
+ else
+ data = 0xFFFFFFFF;
+
+ if (size == 1)
+ *val = (data >> ((where & 3) << 3)) & 0xff;
+ else if (size == 2)
+ *val = (data >> ((where & 3) << 3)) & 0xffff;
+ else
+ *val = data;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int bcm1480ht_pcibios_write(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 val)
+{
+ u32 cfgaddr = CFGADDR(bus, devfn, where);
+ u32 data = 0;
+
+ if ((size == 2) && (where & 1))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ else if ((size == 4) && (where & 3))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ if (!bcm1480ht_can_access(bus, devfn))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ data = READCFG32(cfgaddr);
+
+ if (size == 1)
+ data = (data & ~(0xff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+ else if (size == 2)
+ data = (data & ~(0xffff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+ else
+ data = val;
+
+ WRITECFG32(cfgaddr, data);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int bcm1480ht_pcibios_get_busno(void)
+{
+ return 0;
+}
+
+struct pci_ops bcm1480ht_pci_ops = {
+ .read = bcm1480ht_pcibios_read,
+ .write = bcm1480ht_pcibios_write,
+};
+
+static struct resource bcm1480ht_mem_resource = {
+ .name = "BCM1480 HT MEM",
+ .start = 0x40000000UL,
+ .end = 0x5fffffffUL,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct resource bcm1480ht_io_resource = {
+ .name = "BCM1480 HT I/O",
+ .start = 0x00000000UL,
+ .end = 0x01ffffffUL,
+ .flags = IORESOURCE_IO,
+};
+
+struct pci_controller bcm1480ht_controller = {
+ .pci_ops = &bcm1480ht_pci_ops,
+ .mem_resource = &bcm1480ht_mem_resource,
+ .io_resource = &bcm1480ht_io_resource,
+ .index = 1,
+ .get_busno = bcm1480ht_pcibios_get_busno,
+};
+
+static int __init bcm1480ht_pcibios_init(void)
+{
+ uint32_t cmdreg;
+
+ ht_cfg_space = ioremap(A_BCM1480_PHYS_HT_CFG_MATCH_BITS, 16*1024*1024);
+
+ /*
+ * See if the PCI bus has been configured by the firmware.
+ */
+ cmdreg = READCFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0),
+ PCI_COMMAND));
+ if (!(cmdreg & PCI_COMMAND_MASTER)) {
+ printk("HT: Skipping HT probe. Bus is not initialized.\n");
+ iounmap(ht_cfg_space);
+ return 1; /* XXX */
+ }
+ bcm1480ht_bus_status |= PCI_BUS_ENABLED;
+
+ ht_eoi_space = (unsigned long)
+ ioremap(A_BCM1480_PHYS_HT_SPECIAL_MATCH_BYTES,
+ 4 * 1024 * 1024);
+
+ register_pci_controller(&bcm1480ht_controller);
+
+ return 0;
+}
+
+arch_initcall(bcm1480ht_pcibios_init);
diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c
index 068e0e508e1..efc96ce99ee 100644
--- a/arch/mips/pci/pci-ip27.c
+++ b/arch/mips/pci/pci-ip27.c
@@ -485,5 +485,12 @@ static void __init pci_fixup_ioc3(struct pci_dev *d)
pci_disable_swapping(d);
}
+int pcibus_to_node(struct pci_bus *bus)
+{
+ struct bridge_controller *bc = BRIDGE_CONTROLLER(bus);
+
+ return bc->nasid;
+}
+
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3,
pci_fixup_ioc3);
diff --git a/arch/mips/pci/pci-ip32.c b/arch/mips/pci/pci-ip32.c
index 000dc6af6cd..180af89bcb1 100644
--- a/arch/mips/pci/pci-ip32.c
+++ b/arch/mips/pci/pci-ip32.c
@@ -136,7 +136,9 @@ static int __init mace_init(void)
BUG_ON(request_irq(MACE_PCI_BRIDGE_IRQ, macepci_error, 0,
"MACE PCI error", NULL));
- ioport_resource.end = mace_pci_io_resource.end;
+ iomem_resource = mace_pci_mem_resource;
+ ioport_resource = mace_pci_io_resource;
+
register_pci_controller(&mace_pci_controller);
return 0;
diff --git a/arch/mips/pci/pci-lasat.c b/arch/mips/pci/pci-lasat.c
index ae3cc4b254b..88fb191ad2e 100644
--- a/arch/mips/pci/pci-lasat.c
+++ b/arch/mips/pci/pci-lasat.c
@@ -7,12 +7,8 @@
*/
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
#include <asm/bootinfo.h>
extern struct pci_ops nile4_pci_ops;
@@ -20,14 +16,14 @@ extern struct pci_ops gt64120_pci_ops;
static struct resource lasat_pci_mem_resource = {
.name = "LASAT PCI MEM",
.start = 0x18000000,
- .end = 0x19FFFFFF,
+ .end = 0x19ffffff,
.flags = IORESOURCE_MEM,
};
static struct resource lasat_pci_io_resource = {
.name = "LASAT PCI IO",
.start = 0x1a000000,
- .end = 0x1bFFFFFF,
+ .end = 0x1bffffff,
.flags = IORESOURCE_IO,
};
@@ -38,23 +34,25 @@ static struct pci_controller lasat_pci_controller = {
static int __init lasat_pci_setup(void)
{
- printk("PCI: starting\n");
+ printk("PCI: starting\n");
- switch (mips_machtype) {
- case MACH_LASAT_100:
+ switch (mips_machtype) {
+ case MACH_LASAT_100:
lasat_pci_controller.pci_ops = &gt64120_pci_ops;
break;
- case MACH_LASAT_200:
+ case MACH_LASAT_200:
lasat_pci_controller.pci_ops = &nile4_pci_ops;
break;
- default:
+ default:
panic("pcibios_init: mips_machtype incorrect");
}
register_pci_controller(&lasat_pci_controller);
- return 0;
+
+ return 0;
}
-early_initcall(lasat_pci_setup);
+
+arch_initcall(lasat_pci_setup);
#define LASATINT_ETH1 0
#define LASATINT_ETH0 1
@@ -68,24 +66,22 @@ early_initcall(lasat_pci_setup);
int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
- switch (slot) {
- case 1:
- return LASATINT_PCIA; /* Expansion Module 0 */
- case 2:
- return LASATINT_PCIB; /* Expansion Module 1 */
- case 3:
- return LASATINT_PCIC; /* Expansion Module 2 */
- case 4:
- return LASATINT_ETH1; /* Ethernet 1 (LAN 2) */
- case 5:
- return LASATINT_ETH0; /* Ethernet 0 (LAN 1) */
- case 6:
- return LASATINT_HDC; /* IDE controller */
- default:
- return 0xff; /* Illegal */
- }
+ switch (slot) {
+ case 1:
+ case 2:
+ case 3:
+ return LASATINT_PCIA + (((slot-1) + (pin-1)) % 4);
+ case 4:
+ return LASATINT_ETH1; /* Ethernet 1 (LAN 2) */
+ case 5:
+ return LASATINT_ETH0; /* Ethernet 0 (LAN 1) */
+ case 6:
+ return LASATINT_HDC; /* IDE controller */
+ default:
+ return 0xff; /* Illegal */
+ }
- return -1;
+ return -1;
}
/* Do platform specific device initialization at pci_enable_device() time */
diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
index a8d499b0a36..21402ffd7c9 100644
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -127,15 +127,20 @@ static int __init pcibios_init(void)
if (!hose->iommu)
PCI_DMA_BUS_IS_PHYS = 1;
+ if (hose->get_busno && pci_probe_only)
+ next_busno = (*hose->get_busno)();
+
bus = pci_scan_bus(next_busno, hose->pci_ops, hose);
hose->bus = bus;
hose->need_domain_info = need_domain_info;
- next_busno = bus->subordinate + 1;
- /* Don't allow 8-bit bus number overflow inside the hose -
- reserve some space for bridges. */
- if (next_busno > 224) {
- next_busno = 0;
- need_domain_info = 1;
+ if (bus) {
+ next_busno = bus->subordinate + 1;
+ /* Don't allow 8-bit bus number overflow inside the hose -
+ reserve some space for bridges. */
+ if (next_busno > 224) {
+ next_busno = 0;
+ need_domain_info = 1;
+ }
}
continue;
@@ -164,7 +169,7 @@ static int pcibios_enable_resources(struct pci_dev *dev, int mask)
pci_read_config_word(dev, PCI_COMMAND, &cmd);
old_cmd = cmd;
- for(idx=0; idx<6; idx++) {
+ for (idx=0; idx < PCI_NUM_RESOURCES; idx++) {
/* Only set up the requested stuff */
if (!(mask & (1<<idx)))
continue;
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-26 00:20:54 +0000