diff options
Diffstat (limited to 'arch/mips/pmcs-msp71xx/gpio.c')
| -rw-r--r-- | arch/mips/pmcs-msp71xx/gpio.c | 216 |
1 files changed, 0 insertions, 216 deletions
diff --git a/arch/mips/pmcs-msp71xx/gpio.c b/arch/mips/pmcs-msp71xx/gpio.c deleted file mode 100644 index aaccbe52438..00000000000 --- a/arch/mips/pmcs-msp71xx/gpio.c +++ /dev/null @@ -1,216 +0,0 @@ -/* - * Generic PMC MSP71xx GPIO handling. These base gpio are controlled by two - * types of registers. The data register sets the output level when in output - * mode and when in input mode will contain the value at the input. The config - * register sets the various modes for each gpio. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * @author Patrick Glass <patrickglass@gmail.com> - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/gpio.h> -#include <linux/spinlock.h> -#include <linux/io.h> - -#define MSP71XX_CFG_OFFSET(gpio) (4 * (gpio)) -#define CONF_MASK 0x0F -#define MSP71XX_GPIO_INPUT 0x01 -#define MSP71XX_GPIO_OUTPUT 0x08 - -#define MSP71XX_GPIO_BASE 0x0B8400000L - -#define to_msp71xx_gpio_chip(c) container_of(c, struct msp71xx_gpio_chip, chip) - -static spinlock_t gpio_lock; - -/* - * struct msp71xx_gpio_chip - container for gpio chip and registers - * @chip: chip structure for the specified gpio bank - * @data_reg: register for reading and writing the gpio pin value - * @config_reg: register to set the mode for the gpio pin bank - * @out_drive_reg: register to set the output drive mode for the gpio pin bank - */ -struct msp71xx_gpio_chip { - struct gpio_chip chip; - void __iomem *data_reg; - void __iomem *config_reg; - void __iomem *out_drive_reg; -}; - -/* - * msp71xx_gpio_get() - return the chip's gpio value - * @chip: chip structure which controls the specified gpio - * @offset: gpio whose value will be returned - * - * It will return 0 if gpio value is low and other if high. - */ -static int msp71xx_gpio_get(struct gpio_chip *chip, unsigned offset) -{ - struct msp71xx_gpio_chip *msp_chip = to_msp71xx_gpio_chip(chip); - - return __raw_readl(msp_chip->data_reg) & (1 << offset); -} - -/* - * msp71xx_gpio_set() - set the output value for the gpio - * @chip: chip structure who controls the specified gpio - * @offset: gpio whose value will be assigned - * @value: logic level to assign to the gpio initially - * - * This will set the gpio bit specified to the desired value. It will set the - * gpio pin low if value is 0 otherwise it will be high. - */ -static void msp71xx_gpio_set(struct gpio_chip *chip, unsigned offset, int value) -{ - struct msp71xx_gpio_chip *msp_chip = to_msp71xx_gpio_chip(chip); - unsigned long flags; - u32 data; - - spin_lock_irqsave(&gpio_lock, flags); - - data = __raw_readl(msp_chip->data_reg); - if (value) - data |= (1 << offset); - else - data &= ~(1 << offset); - __raw_writel(data, msp_chip->data_reg); - - spin_unlock_irqrestore(&gpio_lock, flags); -} - -/* - * msp71xx_set_gpio_mode() - declare the mode for a gpio - * @chip: chip structure which controls the specified gpio - * @offset: gpio whose value will be assigned - * @mode: desired configuration for the gpio (see datasheet) - * - * It will set the gpio pin config to the @mode value passed in. - */ -static int msp71xx_set_gpio_mode(struct gpio_chip *chip, - unsigned offset, int mode) -{ - struct msp71xx_gpio_chip *msp_chip = to_msp71xx_gpio_chip(chip); - const unsigned bit_offset = MSP71XX_CFG_OFFSET(offset); - unsigned long flags; - u32 cfg; - - spin_lock_irqsave(&gpio_lock, flags); - - cfg = __raw_readl(msp_chip->config_reg); - cfg &= ~(CONF_MASK << bit_offset); - cfg |= (mode << bit_offset); - __raw_writel(cfg, msp_chip->config_reg); - - spin_unlock_irqrestore(&gpio_lock, flags); - - return 0; -} - -/* - * msp71xx_direction_output() - declare the direction mode for a gpio - * @chip: chip structure which controls the specified gpio - * @offset: gpio whose value will be assigned - * @value: logic level to assign to the gpio initially - * - * This call will set the mode for the @gpio to output. It will set the - * gpio pin low if value is 0 otherwise it will be high. - */ -static int msp71xx_direction_output(struct gpio_chip *chip, - unsigned offset, int value) -{ - msp71xx_gpio_set(chip, offset, value); - - return msp71xx_set_gpio_mode(chip, offset, MSP71XX_GPIO_OUTPUT); -} - -/* - * msp71xx_direction_input() - declare the direction mode for a gpio - * @chip: chip structure which controls the specified gpio - * @offset: gpio whose to which the value will be assigned - * - * This call will set the mode for the @gpio to input. - */ -static int msp71xx_direction_input(struct gpio_chip *chip, unsigned offset) -{ - return msp71xx_set_gpio_mode(chip, offset, MSP71XX_GPIO_INPUT); -} - -/* - * msp71xx_set_output_drive() - declare the output drive for the gpio line - * @gpio: gpio pin whose output drive you wish to modify - * @value: zero for active drain 1 for open drain drive - * - * This call will set the output drive mode for the @gpio to output. - */ -int msp71xx_set_output_drive(unsigned gpio, int value) -{ - unsigned long flags; - u32 data; - - if (gpio > 15 || gpio < 0) - return -EINVAL; - - spin_lock_irqsave(&gpio_lock, flags); - - data = __raw_readl((void __iomem *)(MSP71XX_GPIO_BASE + 0x190)); - if (value) - data |= (1 << gpio); - else - data &= ~(1 << gpio); - __raw_writel(data, (void __iomem *)(MSP71XX_GPIO_BASE + 0x190)); - - spin_unlock_irqrestore(&gpio_lock, flags); - - return 0; -} -EXPORT_SYMBOL(msp71xx_set_output_drive); - -#define MSP71XX_GPIO_BANK(name, dr, cr, base_gpio, num_gpio) \ -{ \ - .chip = { \ - .label = name, \ - .direction_input = msp71xx_direction_input, \ - .direction_output = msp71xx_direction_output, \ - .get = msp71xx_gpio_get, \ - .set = msp71xx_gpio_set, \ - .base = base_gpio, \ - .ngpio = num_gpio \ - }, \ - .data_reg = (void __iomem *)(MSP71XX_GPIO_BASE + dr), \ - .config_reg = (void __iomem *)(MSP71XX_GPIO_BASE + cr), \ - .out_drive_reg = (void __iomem *)(MSP71XX_GPIO_BASE + 0x190), \ -} - -/* - * struct msp71xx_gpio_banks[] - container array of gpio banks - * @chip: chip structure for the specified gpio bank - * @data_reg: register for reading and writing the gpio pin value - * @config_reg: register to set the mode for the gpio pin bank - * - * This array structure defines the gpio banks for the PMC MIPS Processor. - * We specify the bank name, the data register, the config register, base - * starting gpio number, and the number of gpios exposed by the bank. - */ -static struct msp71xx_gpio_chip msp71xx_gpio_banks[] = { - - MSP71XX_GPIO_BANK("GPIO_1_0", 0x170, 0x180, 0, 2), - MSP71XX_GPIO_BANK("GPIO_5_2", 0x174, 0x184, 2, 4), - MSP71XX_GPIO_BANK("GPIO_9_6", 0x178, 0x188, 6, 4), - MSP71XX_GPIO_BANK("GPIO_15_10", 0x17C, 0x18C, 10, 6), -}; - -void __init msp71xx_init_gpio(void) -{ - int i; - - spin_lock_init(&gpio_lock); - - for (i = 0; i < ARRAY_SIZE(msp71xx_gpio_banks); i++) - gpiochip_add(&msp71xx_gpio_banks[i].chip); -} |