diff options
Diffstat (limited to 'arch/mips/powertv/powertv-usb.c')
| -rw-r--r-- | arch/mips/powertv/powertv-usb.c | 46 |
1 files changed, 23 insertions, 23 deletions
diff --git a/arch/mips/powertv/powertv-usb.c b/arch/mips/powertv/powertv-usb.c index b0e2afa8939..d845eace58e 100644 --- a/arch/mips/powertv/powertv-usb.c +++ b/arch/mips/powertv/powertv-usb.c @@ -1,7 +1,7 @@ /* * powertv-usb.c * - * Description: ASIC-specific USB device setup and shutdown + * Description: ASIC-specific USB device setup and shutdown * * Copyright (C) 2005-2009 Scientific-Atlanta, Inc. * Copyright (C) 2009 Cisco Systems, Inc. @@ -20,8 +20,8 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA * - * Author: Ken Eppinett - * David Schleef <ds@schleef.org> + * Author: Ken Eppinett + * David Schleef <ds@schleef.org> * * NOTE: The bootloader allocates persistent memory at an address which is * 16 MiB below the end of the highest address in KSEG0. All fixed @@ -70,15 +70,15 @@ #define MCC2_GMII_RX2_CLOCK_SELECT (1 << 16) #define ETHER_CLK_CONFIG (MCC2_GMII_GCLK_TO_PAD | \ - MCC2_ETHER125_0_CLOCK_SELECT | \ + MCC2_ETHER125_0_CLOCK_SELECT | \ MCC2_RMII_0_CLOCK_SELECT | \ MCC2_GMII_TX0_CLOCK_SELECT | \ MCC2_GMII_RX0_CLOCK_SELECT | \ - MCC2_ETHER125_1_CLOCK_SELECT | \ + MCC2_ETHER125_1_CLOCK_SELECT | \ MCC2_RMII_1_CLOCK_SELECT | \ MCC2_GMII_TX1_CLOCK_SELECT | \ MCC2_GMII_RX1_CLOCK_SELECT | \ - MCC2_ETHER125_2_CLOCK_SELECT | \ + MCC2_ETHER125_2_CLOCK_SELECT | \ MCC2_RMII_2_CLOCK_SELECT | \ MCC2_GMII_TX2_CLOCK_SELECT | \ MCC2_GMII_RX2_CLOCK_SELECT) @@ -98,9 +98,9 @@ #define QAM_FS_DISABLE_DIVIDE_BY_3 (1 << 5) #define QAM_FS_ENABLE_PROGRAM (1 << 4) -#define QAM_FS_ENABLE_OUTPUT (1 << 3) -#define QAM_FS_SELECT_TEST_BYPASS (1 << 2) -#define QAM_FS_DISABLE_DIGITAL_STANDBY (1 << 1) +#define QAM_FS_ENABLE_OUTPUT (1 << 3) +#define QAM_FS_SELECT_TEST_BYPASS (1 << 2) +#define QAM_FS_DISABLE_DIGITAL_STANDBY (1 << 1) #define QAM_FS_CHOOSE_FS (1 << 0) /* Definitions for fs432x4a_ctl register */ @@ -142,14 +142,14 @@ static struct resource ehci_resources[] = { { .parent = &asic_resource, - .start = 0, - .end = 0xff, - .flags = IORESOURCE_MEM, + .start = 0, + .end = 0xff, + .flags = IORESOURCE_MEM, }, { - .start = irq_usbehci, - .end = irq_usbehci, - .flags = IORESOURCE_IRQ, + .start = irq_usbehci, + .end = irq_usbehci, + .flags = IORESOURCE_IRQ, }, }; @@ -169,14 +169,14 @@ static struct platform_device ehci_device = { static struct resource ohci_resources[] = { { .parent = &asic_resource, - .start = 0, - .end = 0xff, - .flags = IORESOURCE_MEM, + .start = 0, + .end = 0xff, + .flags = IORESOURCE_MEM, }, { - .start = irq_usbohci, - .end = irq_usbohci, - .flags = IORESOURCE_IRQ, + .start = irq_usbohci, + .end = irq_usbohci, + .flags = IORESOURCE_IRQ, }, }; @@ -207,9 +207,9 @@ static DEFINE_SPINLOCK(usb_regs_lock); * * QAM frequency selection code, which affects the frequency at which USB * runs. The frequency is calculated as: - * 2^15 * ndiv * Fin + * 2^15 * ndiv * Fin * Fout = ------------------------------------------------------------ - * (sdiv * (ipe * (1 + md/32) - (ipe - 2^15)*(1 + (md + 1)/32))) + * (sdiv * (ipe * (1 + md/32) - (ipe - 2^15)*(1 + (md + 1)/32))) * where: * Fin 54 MHz * ndiv QAM_FS_NSDIV_54MHZ ? 8 : 16 |