1 files changed, 94 insertions, 7 deletions

diff --git a/arch/mips/sibyte/bcm1480/smp.c b/arch/mips/sibyte/bcm1480/smp.c
index 436ba78359a..183c460b9ca 100644
--- a/arch/mips/sibyte/bcm1480/smp.c
+++ b/arch/mips/sibyte/bcm1480/smp.c
@@ -23,6 +23,7 @@
 
 #include <asm/mmu_context.h>
 #include <asm/io.h>
+#include <asm/fw/cfe/cfe_api.h>
 #include <asm/sibyte/sb1250.h>
 #include <asm/sibyte/bcm1480_regs.h>
 #include <asm/sibyte/bcm1480_int.h>
@@ -67,28 +68,114 @@ void __cpuinit bcm1480_smp_init(void)
 	change_c0_status(ST0_IM, imask);
 }
 
-void __cpuinit bcm1480_smp_finish(void)
+/*
+ * These are routines for dealing with the sb1250 smp capabilities
+ * independent of board/firmware
+ */
+
+/*
+ * Simple enough; everything is set up, so just poke the appropriate mailbox
+ * register, and we should be set
+ */
+static void bcm1480_send_ipi_single(int cpu, unsigned int action)
+{
+	__raw_writeq((((u64)action)<< 48), mailbox_0_set_regs[cpu]);
+}
+
+static void bcm1480_send_ipi_mask(cpumask_t mask, unsigned int action)
+{
+	unsigned int i;
+
+	for_each_cpu_mask(i, mask)
+		bcm1480_send_ipi_single(i, action);
+}
+
+/*
+ * Code to run on secondary just after probing the CPU
+ */
+static void __cpuinit bcm1480_init_secondary(void)
+{
+	extern void bcm1480_smp_init(void);
+
+	bcm1480_smp_init();
+}
+
+/*
+ * Do any tidying up before marking online and running the idle
+ * loop
+ */
+static void __cpuinit bcm1480_smp_finish(void)
 {
 	extern void sb1480_clockevent_init(void);
 
 	sb1480_clockevent_init();
 	local_irq_enable();
+	bcm1480_smp_finish();
 }
 
 /*
- * These are routines for dealing with the sb1250 smp capabilities
- * independent of board/firmware
+ * Final cleanup after all secondaries booted
  */
+static void bcm1480_cpus_done(void)
+{
+}
 
 /*
- * Simple enough; everything is set up, so just poke the appropriate mailbox
- * register, and we should be set
+ * Setup the PC, SP, and GP of a secondary processor and start it
+ * running!
  */
-void core_send_ipi(int cpu, unsigned int action)
+static void __cpuinit bcm1480_boot_secondary(int cpu, struct task_struct *idle)
 {
-	__raw_writeq((((u64)action)<< 48), mailbox_0_set_regs[cpu]);
+	int retval;
+
+	retval = cfe_cpu_start(cpu_logical_map(cpu), &smp_bootstrap,
+			       __KSTK_TOS(idle),
+			       (unsigned long)task_thread_info(idle), 0);
+	if (retval != 0)
+		printk("cfe_start_cpu(%i) returned %i\n" , cpu, retval);
 }
 
+/*
+ * Use CFE to find out how many CPUs are available, setting up
+ * phys_cpu_present_map and the logical/physical mappings.
+ * XXXKW will the boot CPU ever not be physical 0?
+ *
+ * Common setup before any secondaries are started
+ */
+static void __init bcm1480_smp_setup(void)
+{
+	int i, num;
+
+	cpus_clear(phys_cpu_present_map);
+	cpu_set(0, phys_cpu_present_map);
+	__cpu_number_map[0] = 0;
+	__cpu_logical_map[0] = 0;
+
+	for (i = 1, num = 0; i < NR_CPUS; i++) {
+		if (cfe_cpu_stop(i) == 0) {
+			cpu_set(i, phys_cpu_present_map);
+			__cpu_number_map[i] = ++num;
+			__cpu_logical_map[num] = i;
+		}
+	}
+	printk(KERN_INFO "Detected %i available secondary CPU(s)\n", num);
+}
+
+static void __init bcm1480_prepare_cpus(unsigned int max_cpus)
+{
+}
+
+struct plat_smp_ops bcm1480_smp_ops = {
+	.send_ipi_single	= bcm1480_send_ipi_single,
+	.send_ipi_mask		= bcm1480_send_ipi_mask,
+	.init_secondary		= bcm1480_init_secondary,
+	.smp_finish		= bcm1480_smp_finish,
+	.cpus_done		= bcm1480_cpus_done,
+	.boot_secondary		= bcm1480_boot_secondary,
+	.smp_setup		= bcm1480_smp_setup,
+	.prepare_cpus		= bcm1480_prepare_cpus,
+};
+
 void bcm1480_mailbox_interrupt(void)
 {
 	int cpu = smp_processor_id();