summaryrefslogtreecommitdiffstats
path: root/arch/mips/sibyte/bcm1480
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/sibyte/bcm1480')
-rw-r--r--arch/mips/sibyte/bcm1480/irq.c30
-rw-r--r--arch/mips/sibyte/bcm1480/time.c35
2 files changed, 21 insertions, 44 deletions
diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c
index 8b1f4148492..2e8f6b2e242 100644
--- a/arch/mips/sibyte/bcm1480/irq.c
+++ b/arch/mips/sibyte/bcm1480/irq.c
@@ -45,11 +45,9 @@
*/
-#define shutdown_bcm1480_irq disable_bcm1480_irq
static void end_bcm1480_irq(unsigned int irq);
static void enable_bcm1480_irq(unsigned int irq);
static void disable_bcm1480_irq(unsigned int irq);
-static unsigned int startup_bcm1480_irq(unsigned int irq);
static void ack_bcm1480_irq(unsigned int irq);
#ifdef CONFIG_SMP
static void bcm1480_set_affinity(unsigned int irq, cpumask_t mask);
@@ -85,11 +83,10 @@ extern char sb1250_duart_present[];
static struct irq_chip bcm1480_irq_type = {
.typename = "BCM1480-IMR",
- .startup = startup_bcm1480_irq,
- .shutdown = shutdown_bcm1480_irq,
- .enable = enable_bcm1480_irq,
- .disable = disable_bcm1480_irq,
.ack = ack_bcm1480_irq,
+ .mask = disable_bcm1480_irq,
+ .mask_ack = ack_bcm1480_irq,
+ .unmask = enable_bcm1480_irq,
.end = end_bcm1480_irq,
#ifdef CONFIG_SMP
.set_affinity = bcm1480_set_affinity
@@ -188,14 +185,6 @@ static void bcm1480_set_affinity(unsigned int irq, cpumask_t mask)
/*****************************************************************************/
-static unsigned int startup_bcm1480_irq(unsigned int irq)
-{
- bcm1480_unmask_irq(bcm1480_irq_owner[irq], irq);
-
- return 0; /* never anything pending */
-}
-
-
static void disable_bcm1480_irq(unsigned int irq)
{
bcm1480_mask_irq(bcm1480_irq_owner[irq], irq);
@@ -270,16 +259,9 @@ void __init init_bcm1480_irqs(void)
{
int i;
- for (i = 0; i < NR_IRQS; i++) {
- irq_desc[i].status = IRQ_DISABLED;
- irq_desc[i].action = 0;
- irq_desc[i].depth = 1;
- if (i < BCM1480_NR_IRQS) {
- irq_desc[i].chip = &bcm1480_irq_type;
- bcm1480_irq_owner[i] = 0;
- } else {
- irq_desc[i].chip = &no_irq_chip;
- }
+ for (i = 0; i < BCM1480_NR_IRQS; i++) {
+ set_irq_chip(i, &bcm1480_irq_type);
+ bcm1480_irq_owner[i] = 0;
}
}
diff --git a/arch/mips/sibyte/bcm1480/time.c b/arch/mips/sibyte/bcm1480/time.c
index bf12af46132..6f3f71bf424 100644
--- a/arch/mips/sibyte/bcm1480/time.c
+++ b/arch/mips/sibyte/bcm1480/time.c
@@ -47,6 +47,12 @@
#define IMR_IP3_VAL K_BCM1480_INT_MAP_I1
#define IMR_IP4_VAL K_BCM1480_INT_MAP_I2
+#ifdef CONFIG_SIMULATION
+#define BCM1480_HPT_VALUE 50000
+#else
+#define BCM1480_HPT_VALUE 1000000
+#endif
+
extern int bcm1480_steal_irq(int irq);
void bcm1480_time_init(void)
@@ -59,11 +65,6 @@ void bcm1480_time_init(void)
BUG();
}
- if (!cpu) {
- /* Use our own gettimeoffset() routine */
- do_gettimeoffset = bcm1480_gettimeoffset;
- }
-
bcm1480_mask_irq(cpu, irq);
/* Map the timer interrupt to ip[4] of this cpu */
@@ -74,11 +75,7 @@ void bcm1480_time_init(void)
/* Disable the timer and set up the count */
__raw_writeq(0, IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
__raw_writeq(
-#ifndef CONFIG_SIMULATION
- 1000000/HZ
-#else
- 50000/HZ
-#endif
+ BCM1480_HPT_VALUE/HZ
, IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT)));
/* Set the timer running */
@@ -97,8 +94,6 @@ void bcm1480_time_init(void)
*/
}
-#include <asm/sibyte/sb1250.h>
-
void bcm1480_timer_interrupt(void)
{
int cpu = smp_processor_id();
@@ -122,16 +117,16 @@ void bcm1480_timer_interrupt(void)
}
}
-/*
- * We use our own do_gettimeoffset() instead of the generic one,
- * because the generic one does not work for SMP case.
- * In addition, since we use general timer 0 for system time,
- * we can get accurate intra-jiffy offset without calibration.
- */
-unsigned long bcm1480_gettimeoffset(void)
+static cycle_t bcm1480_hpt_read(void)
{
+ /* We assume this function is called xtime_lock held. */
unsigned long count =
__raw_readq(IOADDR(A_SCD_TIMER_REGISTER(0, R_SCD_TIMER_CNT)));
+ return (jiffies + 1) * (BCM1480_HPT_VALUE / HZ) - count;
+}
- return 1000000/HZ - count;
+void __init bcm1480_hpt_setup(void)
+{
+ clocksource_mips.read = bcm1480_hpt_read;
+ mips_hpt_frequency = BCM1480_HPT_VALUE;
}